Merge tag 'tty-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial updates from Greg KH:
 "Here is the big tty/serial driver pull request for 4.15-rc1.

  Lots of serial driver updates in here, some small vt cleanups, and a
  raft of SPDX and license boilerplate cleanups, messing up the diffstat
  a bit.

  Nothing major, with no realy functional changes except better hardware
  support for some platforms.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (110 commits)
  tty: ehv_bytechan: fix spelling mistake
  tty: serial: meson: allow baud-rates lower than 9600
  serial: 8250_fintek: Fix crash with baud rate B0
  serial: 8250_fintek: Disable delays for ports != 0
  serial: 8250_fintek: Return -EINVAL on invalid configuration
  tty: Remove redundant license text
  tty: serdev: Remove redundant license text
  tty: hvc: Remove redundant license text
  tty: serial: Remove redundant license text
  tty: add SPDX identifiers to all remaining files in drivers/tty/
  tty: serial: jsm: remove redundant pointer ts
  tty: serial: jsm: add space before the open parenthesis '('
  tty: serial: jsm: fix coding style
  tty: serial: jsm: delete space between function name and '('
  tty: serial: jsm: add blank line after declarations
  tty: serial: jsm: change the type of local variable
  tty: serial: imx: remove dead code imx_dma_rxint
  tty: serial: imx: disable ageing timer interrupt if dma in use
  serial: 8250: fix potential deadlock in rs485-mode
  serial: m32r_sio: Drop redundant .data assignment
  ...

Documentation/devicetree/bindings/dma/stm32-dma.txt

@@ -71,7 +71,7 @@ channel: a phandle to the DMA controller plus the following four integer cells:
 Example:
 
 	usart1: serial@40011000 {
-		compatible = "st,stm32-usart", "st,stm32-uart";
+		compatible = "st,stm32-uart";
 		reg = <0x40011000 0x400>;
 		interrupts = <37>;
 		clocks = <&clk_pclk2>;

Documentation/devicetree/bindings/serial/atmel-usart.txt

@@ -24,6 +24,7 @@ Optional properties:
 	- dma-names: "rx" for RX channel, "tx" for TX channel.
 - atmel,fifo-size: maximum number of data the RX and TX FIFOs can store for FIFO
   capable USARTs.
+- rs485-rts-delay, rs485-rx-during-tx, linux,rs485-enabled-at-boot-time: see rs485.txt
 
 <chip> compatible description:
 - at91rm9200:  legacy USART support

Documentation/devicetree/bindings/serial/fsl-imx-uart.txt

@@ -9,6 +9,7 @@ Optional properties:
 - fsl,irda-mode : Indicate the uart supports irda mode
 - fsl,dte-mode : Indicate the uart works in DTE mode. The uart works
                   in DCE mode by default.
+- rs485-rts-delay, rs485-rx-during-tx, linux,rs485-enabled-at-boot-time: see rs485.txt
 
 Please check Documentation/devicetree/bindings/serial/serial.txt
 for the complete list of generic properties.

Documentation/devicetree/bindings/serial/fsl-lpuart.txt

@@ -16,6 +16,7 @@ Required properties:
 Optional properties:
 - dmas: A list of two dma specifiers, one for each entry in dma-names.
 - dma-names: should contain "tx" and "rx".
+- rs485-rts-delay, rs485-rx-during-tx, linux,rs485-enabled-at-boot-time: see rs485.txt
 
 Note: Optional properties for DMA support. Write them both or both not.
 

Documentation/devicetree/bindings/serial/omap_serial.txt

@@ -19,6 +19,7 @@ Optional properties:
 - dmas : DMA specifier, consisting of a phandle to the DMA controller
          node and a DMA channel number.
 - dma-names : "rx" for receive channel, "tx" for transmit channel.
+- rs485-rts-delay, rs485-rx-during-tx, linux,rs485-enabled-at-boot-time: see rs485.txt
 
 Example:
 

Documentation/devicetree/bindings/serial/st,stm32-usart.txt

@@ -2,14 +2,10 @@
 
 Required properties:
 - compatible: can be either:
-  - "st,stm32-usart",
   - "st,stm32-uart",
-  - "st,stm32f7-usart",
   - "st,stm32f7-uart",
-  - "st,stm32h7-usart"
   - "st,stm32h7-uart".
-  depending on whether the device supports synchronous mode
-  and is compatible with stm32(f4), stm32f7 or stm32h7.
+  depending is compatible with stm32(f4), stm32f7 or stm32h7.
 - reg: The address and length of the peripheral registers space
 - interrupts:
   - The interrupt line for the USART instance,
@@ -33,7 +29,7 @@ usart4: serial@40004c00 {
 };
 
 usart2: serial@40004400 {
-	compatible = "st,stm32-usart", "st,stm32-uart";
+	compatible = "st,stm32-uart";
 	reg = <0x40004400 0x400>;
 	interrupts = <38>;
 	clocks = <&clk_pclk1>;
@@ -43,7 +39,7 @@ usart2: serial@40004400 {
 };
 
 usart1: serial@40011000 {
-	compatible = "st,stm32-usart", "st,stm32-uart";
+	compatible = "st,stm32-uart";
 	reg = <0x40011000 0x400>;
 	interrupts = <37>;
 	clocks = <&rcc 0 164>;

arch/arm/boot/dts/stm32f429.dtsi

@@ -314,7 +314,7 @@
 		};
 
 		usart2: serial@40004400 {
-			compatible = "st,stm32-usart", "st,stm32-uart";
+			compatible = "st,stm32-uart";
 			reg = <0x40004400 0x400>;
 			interrupts = <38>;
 			clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART2)>;
@@ -322,7 +322,7 @@
 		};
 
 		usart3: serial@40004800 {
-			compatible = "st,stm32-usart", "st,stm32-uart";
+			compatible = "st,stm32-uart";
 			reg = <0x40004800 0x400>;
 			interrupts = <39>;
 			clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART3)>;
@@ -386,7 +386,7 @@
 		};
 
 		usart7: serial@40007800 {
-			compatible = "st,stm32-usart", "st,stm32-uart";
+			compatible = "st,stm32-uart";
 			reg = <0x40007800 0x400>;
 			interrupts = <82>;
 			clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART7)>;
@@ -394,7 +394,7 @@
 		};
 
 		usart8: serial@40007c00 {
-			compatible = "st,stm32-usart", "st,stm32-uart";
+			compatible = "st,stm32-uart";
 			reg = <0x40007c00 0x400>;
 			interrupts = <83>;
 			clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART8)>;
@@ -444,7 +444,7 @@
 		};
 
 		usart1: serial@40011000 {
-			compatible = "st,stm32-usart", "st,stm32-uart";
+			compatible = "st,stm32-uart";
 			reg = <0x40011000 0x400>;
 			interrupts = <37>;
 			clocks = <&rcc 0 STM32F4_APB2_CLOCK(USART1)>;
@@ -455,7 +455,7 @@
 		};
 
 		usart6: serial@40011400 {
-			compatible = "st,stm32-usart", "st,stm32-uart";
+			compatible = "st,stm32-uart";
 			reg = <0x40011400 0x400>;
 			interrupts = <71>;
 			clocks = <&rcc 0 STM32F4_APB2_CLOCK(USART6)>;

arch/arm/boot/dts/stm32f746.dtsi

@@ -136,7 +136,7 @@
 		};
 
 		usart2: serial@40004400 {
-			compatible = "st,stm32f7-usart", "st,stm32f7-uart";
+			compatible = "st,stm32f7-uart";
 			reg = <0x40004400 0x400>;
 			interrupts = <38>;
 			clocks = <&rcc 1 CLK_USART2>;
@@ -144,7 +144,7 @@
 		};
 
 		usart3: serial@40004800 {
-			compatible = "st,stm32f7-usart", "st,stm32f7-uart";
+			compatible = "st,stm32f7-uart";
 			reg = <0x40004800 0x400>;
 			interrupts = <39>;
 			clocks = <&rcc 1 CLK_USART3>;
@@ -177,7 +177,7 @@
 		};
 
 		usart7: serial@40007800 {
-			compatible = "st,stm32f7-usart", "st,stm32f7-uart";
+			compatible = "st,stm32f7-uart";
 			reg = <0x40007800 0x400>;
 			interrupts = <82>;
 			clocks = <&rcc 1 CLK_UART7>;
@@ -185,7 +185,7 @@
 		};
 
 		usart8: serial@40007c00 {
-			compatible = "st,stm32f7-usart", "st,stm32f7-uart";
+			compatible = "st,stm32f7-uart";
 			reg = <0x40007c00 0x400>;
 			interrupts = <83>;
 			clocks = <&rcc 1 CLK_UART8>;
@@ -193,7 +193,7 @@
 		};
 
 		usart1: serial@40011000 {
-			compatible = "st,stm32f7-usart", "st,stm32f7-uart";
+			compatible = "st,stm32f7-uart";
 			reg = <0x40011000 0x400>;
 			interrupts = <37>;
 			clocks = <&rcc 1 CLK_USART1>;
@@ -201,7 +201,7 @@
 		};
 
 		usart6: serial@40011400 {
-			compatible = "st,stm32f7-usart", "st,stm32f7-uart";
+			compatible = "st,stm32f7-uart";
 			reg = <0x40011400 0x400>;
 			interrupts = <71>;
 			clocks = <&rcc 1 CLK_USART6>;

arch/arm/boot/dts/stm32h743.dtsi

@@ -67,7 +67,7 @@
 		};
 
 		usart2: serial@40004400 {
-			compatible = "st,stm32f7-usart", "st,stm32f7-uart";
+			compatible = "st,stm32f7-uart";
 			reg = <0x40004400 0x400>;
 			interrupts = <38>;
 			status = "disabled";
@@ -99,7 +99,7 @@
 		};
 
 		usart1: serial@40011000 {
-			compatible = "st,stm32f7-usart", "st,stm32f7-uart";
+			compatible = "st,stm32f7-uart";
 			reg = <0x40011000 0x400>;
 			interrupts = <37>;
 			status = "disabled";

drivers/acpi/scan.c

@@ -1505,41 +1505,38 @@ static void acpi_init_coherency(struct acpi_device *adev)
 	adev->flags.coherent_dma = cca;
 }
 
-static int acpi_check_spi_i2c_slave(struct acpi_resource *ares, void *data)
+static int acpi_check_serial_bus_slave(struct acpi_resource *ares, void *data)
 {
-	bool *is_spi_i2c_slave_p = data;
+	bool *is_serial_bus_slave_p = data;
 
 	if (ares->type != ACPI_RESOURCE_TYPE_SERIAL_BUS)
 		return 1;
 
-	/*
-	 * devices that are connected to UART still need to be enumerated to
-	 * platform bus
-	 */
-	if (ares->data.common_serial_bus.type != ACPI_RESOURCE_SERIAL_TYPE_UART)
-		*is_spi_i2c_slave_p = true;
+	*is_serial_bus_slave_p = true;
 
 	 /* no need to do more checking */
 	return -1;
 }
 
-static bool acpi_is_spi_i2c_slave(struct acpi_device *device)
+static bool acpi_is_serial_bus_slave(struct acpi_device *device)
 {
 	struct list_head resource_list;
-	bool is_spi_i2c_slave = false;
+	bool is_serial_bus_slave = false;
 
 	/* Macs use device properties in lieu of _CRS resources */
 	if (x86_apple_machine &&
 	    (fwnode_property_present(&device->fwnode, "spiSclkPeriod") ||
-	     fwnode_property_present(&device->fwnode, "i2cAddress")))
+	     fwnode_property_present(&device->fwnode, "i2cAddress") ||
+	     fwnode_property_present(&device->fwnode, "baud")))
 		return true;
 
 	INIT_LIST_HEAD(&resource_list);
-	acpi_dev_get_resources(device, &resource_list, acpi_check_spi_i2c_slave,
-			       &is_spi_i2c_slave);
+	acpi_dev_get_resources(device, &resource_list,
+			       acpi_check_serial_bus_slave,
+			       &is_serial_bus_slave);
 	acpi_dev_free_resource_list(&resource_list);
 
-	return is_spi_i2c_slave;
+	return is_serial_bus_slave;
 }
 
 void acpi_init_device_object(struct acpi_device *device, acpi_handle handle,
@@ -1557,7 +1554,7 @@ void acpi_init_device_object(struct acpi_device *device, acpi_handle handle,
 	acpi_bus_get_flags(device);
 	device->flags.match_driver = false;
 	device->flags.initialized = true;
-	device->flags.spi_i2c_slave = acpi_is_spi_i2c_slave(device);
+	device->flags.serial_bus_slave = acpi_is_serial_bus_slave(device);
 	acpi_device_clear_enumerated(device);
 	device_initialize(&device->dev);
 	dev_set_uevent_suppress(&device->dev, true);
@@ -1841,10 +1838,10 @@ static acpi_status acpi_bus_check_add(acpi_handle handle, u32 lvl_not_used,
 static void acpi_default_enumeration(struct acpi_device *device)
 {
 	/*
-	 * Do not enumerate SPI/I2C slaves as they will be enumerated by their
-	 * respective parents.
+	 * Do not enumerate SPI/I2C/UART slaves as they will be enumerated by
+	 * their respective parents.
 	 */
-	if (!device->flags.spi_i2c_slave) {
+	if (!device->flags.serial_bus_slave) {
 		acpi_create_platform_device(device, NULL);
 		acpi_device_set_enumerated(device);
 	} else {
@@ -1941,7 +1938,7 @@ static void acpi_bus_attach(struct acpi_device *device)
 		return;
 
 	device->flags.match_driver = true;
-	if (ret > 0 && !device->flags.spi_i2c_slave) {
+	if (ret > 0 && !device->flags.serial_bus_slave) {
 		acpi_device_set_enumerated(device);
 		goto ok;
 	}
@@ -1950,7 +1947,7 @@ static void acpi_bus_attach(struct acpi_device *device)
 	if (ret < 0)
 		return;
 
-	if (!device->pnp.type.platform_id && !device->flags.spi_i2c_slave)
+	if (!device->pnp.type.platform_id && !device->flags.serial_bus_slave)
 		acpi_device_set_enumerated(device);
 	else
 		acpi_default_enumeration(device);

drivers/tty/amiserial.c

@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Serial driver for the amiga builtin port.
  *

drivers/tty/bfin_jtag_comm.c

@@ -1,11 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * TTY over Blackfin JTAG Communication
  *
  * Copyright 2008-2009 Analog Devices Inc.
  *
  * Enter bugs at http://blackfin.uclinux.org/
- *
- * Licensed under the GPL-2 or later.
  */
 
 #define DRV_NAME "bfin-jtag-comm"

drivers/tty/cyclades.c

@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 #undef	BLOCKMOVE
 #define	Z_WAKE
 #undef	Z_EXT_CHARS_IN_BUFFER
@@ -286,8 +287,7 @@ static long cyz_polling_cycle = CZ_DEF_POLL;
 static DEFINE_TIMER(cyz_timerlist, cyz_poll);
 
 #else				/* CONFIG_CYZ_INTR */
-static void cyz_rx_restart(unsigned long);
-static struct timer_list cyz_rx_full_timer[NR_PORTS];
+static void cyz_rx_restart(struct timer_list *);
 #endif				/* CONFIG_CYZ_INTR */
 
 static void cyy_writeb(struct cyclades_port *port, u32 reg, u8 val)
@@ -992,10 +992,8 @@ static void cyz_handle_rx(struct cyclades_port *info)
 	else
 		char_count = rx_put - rx_get + rx_bufsize;
 	if (char_count >= readl(&buf_ctrl->rx_threshold) &&
-			!timer_pending(&cyz_rx_full_timer[
-					info->line]))
-		mod_timer(&cyz_rx_full_timer[info->line],
-				jiffies + 1);
+			!timer_pending(&info->rx_full_timer))
+		mod_timer(&info->rx_full_timer, jiffies + 1);
 #endif
 	info->idle_stats.recv_idle = jiffies;
 	tty_schedule_flip(&info->port);
@@ -1197,9 +1195,9 @@ static irqreturn_t cyz_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }				/* cyz_interrupt */
 
-static void cyz_rx_restart(unsigned long arg)
+static void cyz_rx_restart(struct timer_list *t)
 {
-	struct cyclades_port *info = (struct cyclades_port *)arg;
+	struct cyclades_port *info = from_timer(info, t, rx_full_timer);
 	struct cyclades_card *card = info->card;
 	int retval;
 	__u32 channel = info->line - card->first_line;
@@ -3097,8 +3095,7 @@ static int cy_init_card(struct cyclades_card *cinfo)
 			else
 				info->xmit_fifo_size = 4 * CYZ_FIFO_SIZE;
 #ifdef CONFIG_CYZ_INTR
-			setup_timer(&cyz_rx_full_timer[port],
-				cyz_rx_restart, (unsigned long)info);
+			timer_setup(&info->rx_full_timer, cyz_rx_restart, 0);
 #endif
 		} else {
 			unsigned short chip_number;

drivers/tty/ehv_bytechan.c

@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /* ePAPR hypervisor byte channel device driver
  *
  * Copyright 2009-2011 Freescale Semiconductor, Inc.
  *
  * Author: Timur Tabi <timur@freescale.com>
  *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- *
  * This driver support three distinct interfaces, all of which are related to
  * ePAPR hypervisor byte channels.
  *
@@ -328,7 +325,7 @@ console_initcall(ehv_bc_console_init);
 /******************************** TTY DRIVER ********************************/
 
 /*
- * byte channel receive interupt handler
+ * byte channel receive interrupt handler
  *
  * This ISR is called whenever data is available on a byte channel.
  */
@@ -428,7 +425,7 @@ static void ehv_bc_tx_dequeue(struct ehv_bc_data *bc)
 }
 
 /*
- * byte channel transmit interupt handler
+ * byte channel transmit interrupt handler
  *
  * This ISR is called whenever space becomes available for transmitting
  * characters on a byte channel.

drivers/tty/goldfish.c

@@ -1,17 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (C) 2007 Google, Inc.
  * Copyright (C) 2012 Intel, Inc.
  * Copyright (C) 2017 Imagination Technologies Ltd.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
  */
 
 #include <linux/console.h>

drivers/tty/hvc/hvc_bfin_jtag.c

@@ -1,11 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Console via Blackfin JTAG Communication
  *
  * Copyright 2008-2011 Analog Devices Inc.
  *
  * Enter bugs at http://blackfin.uclinux.org/
- *
- * Licensed under the GPL-2 or later.
  */
 
 #include <linux/console.h>

drivers/tty/hvc/hvc_console.c

@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright (C) 2001 Anton Blanchard <anton@au.ibm.com>, IBM
  * Copyright (C) 2001 Paul Mackerras <paulus@au.ibm.com>, IBM
@@ -6,20 +7,6 @@
  *
  * Additional Author(s):
  *  Ryan S. Arnold <rsa@us.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- * 
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- * 
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  */
 
 #include <linux/console.h>

drivers/tty/hvc/hvc_console.h

@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * hvc_console.h
  * Copyright (C) 2005 IBM Corporation
@@ -8,20 +9,6 @@
  * hvc_console header information:
  *      moved here from arch/powerpc/include/asm/hvconsole.h
  *      and drivers/char/hvc_console.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  */
 
 #ifndef HVC_CONSOLE_H

drivers/tty/hvc/hvc_dcc.c

@@ -1,14 +1,5 @@
-/* Copyright (c) 2010, 2014 The Linux Foundation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2010, 2014 The Linux Foundation. All rights reserved.  */
 
 #include <linux/init.h>
 

drivers/tty/hvc/hvc_opal.c

@@ -1,22 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * opal driver interface to hvc_console.c
  *
  * Copyright 2011 Benjamin Herrenschmidt <benh@kernel.crashing.org>, IBM Corp.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- *
  */
 
 #undef DEBUG

drivers/tty/hvc/hvc_rtas.c

@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * IBM RTAS driver interface to hvc_console.c
  *
@@ -11,20 +12,6 @@
  *
  *    inspired by drivers/char/hvc_console.c
  *    written by Anton Blanchard and Paul Mackerras
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  */
 
 #include <linux/console.h>

drivers/tty/hvc/hvc_tile.c

@@ -1,16 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright 2010 Tilera Corporation. All Rights Reserved.
  *
- *   This program is free software; you can redistribute it and/or
- *   modify it under the terms of the GNU General Public License
- *   as published by the Free Software Foundation, version 2.
- *
- *   This program is distributed in the hope that it will be useful, but
- *   WITHOUT ANY WARRANTY; without even the implied warranty of
- *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- *   NON INFRINGEMENT.  See the GNU General Public License for
- *   more details.
- *
  * Tilera TILE Processor hypervisor console
  */
 

drivers/tty/hvc/hvc_udbg.c

@@ -1,21 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * udbg interface to hvc_console.c
  *
  * (C) Copyright David Gibson, IBM Corporation 2008.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  */
 
 #include <linux/console.h>

drivers/tty/hvc/hvc_vio.c

@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * vio driver interface to hvc_console.c
  *
@@ -14,20 +15,6 @@
  * Additional Author(s):
  *  Ryan S. Arnold <rsa@us.ibm.com>
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- *
  * TODO:
  *
  *   - handle error in sending hvsi protocol packets

drivers/tty/hvc/hvc_xen.c

@@ -1,21 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * xen console driver interface to hvc_console.c
  *
  * (c) 2007 Gerd Hoffmann <kraxel@suse.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  */
 
 #include <linux/console.h>

drivers/tty/hvc/hvcs.c

@@ -1,22 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * IBM eServer Hypervisor Virtual Console Server Device Driver
  * Copyright (C) 2003, 2004 IBM Corp.
  *  Ryan S. Arnold (rsa@us.ibm.com)
  *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- *
  * Author(s) :  Ryan S. Arnold <rsa@us.ibm.com>
  *
  * This is the device driver for the IBM Hypervisor Virtual Console Server,

drivers/tty/hvc/hvsi.c

@@ -1,19 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright (C) 2004 Hollis Blanchard <hollisb@us.ibm.com>, IBM
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  */
 
 /* Host Virtual Serial Interface (HVSI) is a protocol between the hosted OS

drivers/tty/ipwireless/main.c

@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * IPWireless 3G PCMCIA Network Driver
  *

drivers/tty/isicom.c

@@ -1,9 +1,5 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
- *	This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License
- *	as published by the Free Software Foundation; either version
- *	2 of the License, or (at your option) any later version.
- *
  *	Original driver code supplied by Multi-Tech
  *
  *	Changes

drivers/tty/metag_da.c

@@ -1,12 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  *  dashtty.c - tty driver for Dash channels interface.
  *
  *  Copyright (C) 2007,2008,2012 Imagination Technologies
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
- *
  */
 
 #include <linux/atomic.h>
@@ -309,7 +305,7 @@ static int put_data(void *arg)
 /*
  *	This gets called every DA_TTY_POLL and polls the channels for data
  */
-static void dashtty_timer(unsigned long ignored)
+static void dashtty_timer(struct timer_list *poll_timer)
 {
 	int channel;
 
@@ -323,12 +319,12 @@ static void dashtty_timer(unsigned long ignored)
 	if (channel >= 0)
 		fetch_data(channel);
 
-	mod_timer(&poll_timer, jiffies + DA_TTY_POLL);
+	mod_timer(poll_timer, jiffies + DA_TTY_POLL);
 }
 
 static void add_poll_timer(struct timer_list *poll_timer)
 {
-	setup_pinned_timer(poll_timer, dashtty_timer, 0);
+	timer_setup(poll_timer, dashtty_timer, TIMER_PINNED);
 	poll_timer->expires = jiffies + DA_TTY_POLL;
 
 	/*
@@ -461,7 +457,7 @@ static void dashtty_hangup(struct tty_struct *tty)
  * buffers. It is used to delay the expensive writeout until the writer has
  * stopped writing.
  */
-static void dashtty_put_timer(unsigned long ignored)
+static void dashtty_put_timer(struct timer_list *unused)
 {
 	if (atomic_read(&dashtty_xmit_cnt))
 		wake_up_interruptible(&dashtty_waitqueue);
@@ -603,7 +599,7 @@ static int __init dashtty_init(void)
 		complete(&dport->xmit_empty);
 	}
 
-	setup_timer(&put_timer, dashtty_put_timer, 0);
+	timer_setup(&put_timer, dashtty_put_timer, 0);
 
 	init_waitqueue_head(&dashtty_waitqueue);
 	dashtty_thread = kthread_create(put_data, NULL, "ttyDA");

drivers/tty/mips_ejtag_fdc.c

@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * TTY driver for MIPS EJTAG Fast Debug Channels.
  *
  * Copyright (C) 2007-2015 Imagination Technologies Ltd
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive for more
- * details.
  */
 
 #include <linux/atomic.h>
@@ -683,9 +680,9 @@ static irqreturn_t mips_ejtag_fdc_isr(int irq, void *dev_id)
  * It simply triggers the common FDC handler code and arranges for further
  * polling.
  */
-static void mips_ejtag_fdc_tty_timer(unsigned long opaque)
+static void mips_ejtag_fdc_tty_timer(struct timer_list *t)
 {
-	struct mips_ejtag_fdc_tty *priv = (void *)opaque;
+	struct mips_ejtag_fdc_tty *priv = from_timer(priv, t, poll_timer);
 
 	mips_ejtag_fdc_handle(priv);
 	if (!priv->removing)
@@ -1002,8 +999,8 @@ static int mips_ejtag_fdc_tty_probe(struct mips_cdmm_device *dev)
 		raw_spin_unlock_irq(&priv->lock);
 	} else {
 		/* If we didn't get an usable IRQ, poll instead */
-		setup_pinned_timer(&priv->poll_timer, mips_ejtag_fdc_tty_timer,
-			    (unsigned long)priv);
+		timer_setup(&priv->poll_timer, mips_ejtag_fdc_tty_timer,
+			    TIMER_PINNED);
 		priv->poll_timer.expires = jiffies + FDC_TTY_POLL;
 		/*
 		 * Always attach the timer to the right CPU. The channels are

drivers/tty/moxa.c

@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*****************************************************************************/
 /*
  *           moxa.c  -- MOXA Intellio family multiport serial driver.
@@ -7,11 +8,6 @@
  *
  *      This code is loosely based on the Linux serial driver, written by
  *      Linus Torvalds, Theodore T'so and others.
- *
- *      This program is free software; you can redistribute it and/or modify
- *      it under the terms of the GNU General Public License as published by
- *      the Free Software Foundation; either version 2 of the License, or
- *      (at your option) any later version.
  */
 
 /*

drivers/tty/mxser.c

@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  *          mxser.c  -- MOXA Smartio/Industio family multiport serial driver.
  *
@@ -8,11 +9,6 @@
  *	Linux serial driver, written by Linus Torvalds, Theodore T'so and
  *	others.
  *
- *      This program is free software; you can redistribute it and/or modify
- *      it under the terms of the GNU General Public License as published by
- *      the Free Software Foundation; either version 2 of the License, or
- *      (at your option) any later version.
- *
  *	Fed through a cleanup, indent and remove of non 2.6 code by Alan Cox
  *	<alan@lxorguk.ukuu.org.uk>. The original 1.8 code is available on
  *	www.moxa.com.
@@ -642,8 +638,7 @@ static int mxser_set_baud(struct tty_struct *tty, long newspd)
  * This routine is called to set the UART divisor registers to match
  * the specified baud rate for a serial port.
  */
-static int mxser_change_speed(struct tty_struct *tty,
-					struct ktermios *old_termios)
+static int mxser_change_speed(struct tty_struct *tty)
 {
 	struct mxser_port *info = tty->driver_data;
 	unsigned cflag, cval, fcr;
@@ -945,7 +940,7 @@ static int mxser_activate(struct tty_port *port, struct tty_struct *tty)
 	/*
 	 * and set the speed of the serial port
 	 */
-	mxser_change_speed(tty, NULL);
+	mxser_change_speed(tty);
 	spin_unlock_irqrestore(&info->slock, flags);
 
 	return 0;
@@ -1288,7 +1283,7 @@ static int mxser_set_serial_info(struct tty_struct *tty,
 	if (tty_port_initialized(port)) {
 		if (flags != (port->flags & ASYNC_SPD_MASK)) {
 			spin_lock_irqsave(&info->slock, sl_flags);
-			mxser_change_speed(tty, NULL);
+			mxser_change_speed(tty);
 			spin_unlock_irqrestore(&info->slock, sl_flags);
 		}
 	} else {
@@ -1946,7 +1941,7 @@ static void mxser_set_termios(struct tty_struct *tty, struct ktermios *old_termi
 	unsigned long flags;
 
 	spin_lock_irqsave(&info->slock, flags);
-	mxser_change_speed(tty, old_termios);
+	mxser_change_speed(tty);
 	spin_unlock_irqrestore(&info->slock, flags);
 
 	if ((old_termios->c_cflag & CRTSCTS) && !C_CRTSCTS(tty)) {
@@ -2375,8 +2370,7 @@ static void mxser_release_ISA_res(struct mxser_board *brd)
 	mxser_release_vector(brd);
 }
 
-static int mxser_initbrd(struct mxser_board *brd,
-		struct pci_dev *pdev)
+static int mxser_initbrd(struct mxser_board *brd)
 {
 	struct mxser_port *info;
 	unsigned int i;
@@ -2640,7 +2634,7 @@ static int mxser_probe(struct pci_dev *pdev,
 	}
 
 	/* mxser_initbrd will hook ISR. */
-	retval = mxser_initbrd(brd, pdev);
+	retval = mxser_initbrd(brd);
 	if (retval)
 		goto err_rel3;
 
@@ -2746,7 +2740,7 @@ static int __init mxser_module_init(void)
 				brd->info->name, ioaddr[b]);
 
 		/* mxser_initbrd will hook ISR. */
-		if (mxser_initbrd(brd, NULL) < 0) {
+		if (mxser_initbrd(brd) < 0) {
 			mxser_release_ISA_res(brd);
 			brd->info = NULL;
 			continue;

drivers/tty/n_gsm.c

@@ -1,20 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * n_gsm.c GSM 0710 tty multiplexor
  * Copyright (c) 2009/10 Intel Corporation
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
  *	* THIS IS A DEVELOPMENT SNAPSHOT IT IS NOT A FINAL RELEASE *
  *
  * TO DO:
@@ -1646,9 +1634,7 @@ static struct gsm_dlci *gsm_dlci_alloc(struct gsm_mux *gsm, int addr)
 	}
 
 	skb_queue_head_init(&dlci->skb_list);
-	init_timer(&dlci->t1);
-	dlci->t1.function = gsm_dlci_t1;
-	dlci->t1.data = (unsigned long)dlci;
+	setup_timer(&dlci->t1, gsm_dlci_t1, (unsigned long)dlci);
 	tty_port_init(&dlci->port);
 	dlci->port.ops = &gsm_port_ops;
 	dlci->gsm = gsm;

drivers/tty/n_hdlc.c

@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-1.0+
 /* generic HDLC line discipline for Linux
  *
  * Written by Paul Fulghum paulkf@microgate.com
@@ -11,8 +12,6 @@
  *
  * Original release 01/11/99
  *
- * This code is released under the GNU General Public License (GPL)
- *
  * This module implements the tty line discipline N_HDLC for use with
  * tty device drivers that support bit-synchronous HDLC communications.
  *

drivers/tty/n_null.c

@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 #include <linux/types.h>
 #include <linux/errno.h>
 #include <linux/tty.h>
@@ -7,19 +8,6 @@
  *  n_null.c - Null line discipline used in the failure path
  *
  *  Copyright (C) Intel 2017
- *
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2
- *  as published by the Free Software Foundation.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  */
 
 static int n_null_open(struct tty_struct *tty)

drivers/tty/n_r3964.c

@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-1.0+
 /* r3964 linediscipline for linux
  *
  * -----------------------------------------------------------
@@ -5,9 +6,6 @@
  * Philips Automation Projects
  * Kassel (Germany)
  * -----------------------------------------------------------
- * This software may be used and distributed according to the terms of
- * the GNU General Public License, incorporated herein by reference.
- *
  * Author:
  * L. Haag
  *

drivers/tty/n_tracerouter.c

@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  *  n_tracerouter.c - Trace data router through tty space
  *
@@ -5,17 +6,6 @@
  *
  * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2
- *  as published by the Free Software Foundation.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- *
  * This trace router uses the Linux line discipline framework to route
  * trace data coming from a HW Modem to a PTI (Parallel Trace Module) port.
  * The solution is not specific to a HW modem and this line disciple can

drivers/tty/n_tracesink.c

@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  *  n_tracesink.c - Trace data router and sink path through tty space.
  *
@@ -5,17 +6,6 @@
  *
  * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2
- *  as published by the Free Software Foundation.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- *
  * The trace sink uses the Linux line discipline framework to receive
  * trace data coming from the PTI source line discipline driver
  * to a user-desired tty port, like USB.

drivers/tty/n_tracesink.h

@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  *  n_tracesink.h - Kernel driver API to route trace data in kernel space.
  *
@@ -5,17 +6,6 @@
  *
  * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2
- *  as published by the Free Software Foundation.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- *
  * The PTI (Parallel Trace Interface) driver directs trace data routed from
  * various parts in the system out through the Intel Penwell PTI port and
  * out of the mobile device for analysis with a debugging tool

drivers/tty/n_tty.c

@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-1.0+
 /*
  * n_tty.c --- implements the N_TTY line discipline.
  *
@@ -15,9 +16,6 @@
  * This file also contains code originally written by Linus Torvalds,
  * Copyright 1991, 1992, 1993, and by Julian Cowley, Copyright 1994.
  *
- * This file may be redistributed under the terms of the GNU General Public
- * License.
- *
  * Reduced memory usage for older ARM systems  - Russell King.
  *
  * 2000/01/20   Fixed SMP locking on put_tty_queue using bits of

drivers/tty/nozomi.c

@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
 /*
  * nozomi.c  -- HSDPA driver Broadband Wireless Data Card - Globe Trotter
  *
@@ -21,20 +22,6 @@
  * Copyright (c) 2006 Option Wireless n/v
  * All rights Reserved.
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
  * --------------------------------------------------------------------------
  */
 

drivers/tty/rocket.c

@@ -1,23 +1,10 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
 /*
  * RocketPort device driver for Linux
  *
  * Written by Theodore Ts'o, 1995, 1996, 1997, 1998, 1999, 2000.
  * 
  * Copyright (C) 1995, 1996, 1997, 1998, 1999, 2000, 2003 by Comtrol, Inc.
- * 
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- * 
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- * 
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 /*

drivers/tty/serdev/Kconfig

@@ -6,11 +6,19 @@ menuconfig SERIAL_DEV_BUS
 	help
 	  Core support for devices connected via a serial port.
 
+	  Note that you typically also want to enable TTY port controller support.
+
 if SERIAL_DEV_BUS
 
 config SERIAL_DEV_CTRL_TTYPORT
 	bool "Serial device TTY port controller"
+	help
+	  Say Y here if you want to use the Serial device bus with common TTY
+	  drivers (e.g. serial drivers).
+
+	  If unsure, say Y.
 	depends on TTY
 	depends on SERIAL_DEV_BUS != m
+	default y
 
 endif

drivers/tty/serdev/core.c

@@ -1,19 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (C) 2016-2017 Linaro Ltd., Rob Herring <robh@kernel.org>
  *
  * Based on drivers/spmi/spmi.c:
  * Copyright (c) 2012-2015, The Linux Foundation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
+#include <linux/acpi.h>
 #include <linux/errno.h>
 #include <linux/idr.h>
 #include <linux/kernel.h>
@@ -49,13 +42,22 @@ static const struct device_type serdev_ctrl_type = {
 
 static int serdev_device_match(struct device *dev, struct device_driver *drv)
 {
-	/* TODO: ACPI and platform matching */
+	/* TODO: platform matching */
+	if (acpi_driver_match_device(dev, drv))
+		return 1;
+
 	return of_driver_match_device(dev, drv);
 }
 
 static int serdev_uevent(struct device *dev, struct kobj_uevent_env *env)
 {
-	/* TODO: ACPI and platform modalias */
+	int rc;
+
+	/* TODO: platform modalias */
+	rc = acpi_device_uevent_modalias(dev, env);
+	if (rc != -ENODEV)
+		return rc;
+
 	return of_device_uevent_modalias(dev, env);
 }
 
@@ -65,21 +67,32 @@ static int serdev_uevent(struct device *dev, struct kobj_uevent_env *env)
  */
 int serdev_device_add(struct serdev_device *serdev)
 {
+	struct serdev_controller *ctrl = serdev->ctrl;
 	struct device *parent = serdev->dev.parent;
 	int err;
 
 	dev_set_name(&serdev->dev, "%s-%d", dev_name(parent), serdev->nr);
 
+	/* Only a single slave device is currently supported. */
+	if (ctrl->serdev) {
+		dev_err(&serdev->dev, "controller busy\n");
+		return -EBUSY;
+	}
+	ctrl->serdev = serdev;
+
 	err = device_add(&serdev->dev);
 	if (err < 0) {
 		dev_err(&serdev->dev, "Can't add %s, status %d\n",
 			dev_name(&serdev->dev), err);
-		goto err_device_add;
+		goto err_clear_serdev;
 	}
 
 	dev_dbg(&serdev->dev, "device %s registered\n", dev_name(&serdev->dev));
 
-err_device_add:
+	return 0;
+
+err_clear_serdev:
+	ctrl->serdev = NULL;
 	return err;
 }
 EXPORT_SYMBOL_GPL(serdev_device_add);
@@ -90,7 +103,10 @@ EXPORT_SYMBOL_GPL(serdev_device_add);
  */
 void serdev_device_remove(struct serdev_device *serdev)
 {
+	struct serdev_controller *ctrl = serdev->ctrl;
+
 	device_unregister(&serdev->dev);
+	ctrl->serdev = NULL;
 }
 EXPORT_SYMBOL_GPL(serdev_device_remove);
 
@@ -260,6 +276,12 @@ static int serdev_drv_remove(struct device *dev)
 static ssize_t modalias_show(struct device *dev,
 			     struct device_attribute *attr, char *buf)
 {
+	int len;
+
+	len = acpi_device_modalias(dev, buf, PAGE_SIZE - 1);
+	if (len != -ENODEV)
+		return len;
+
 	return of_device_modalias(dev, buf, PAGE_SIZE);
 }
 DEVICE_ATTR_RO(modalias);
@@ -295,7 +317,6 @@ struct serdev_device *serdev_device_alloc(struct serdev_controller *ctrl)
 		return NULL;
 
 	serdev->ctrl = ctrl;
-	ctrl->serdev = serdev;
 	device_initialize(&serdev->dev);
 	serdev->dev.parent = &ctrl->dev;
 	serdev->dev.bus = &serdev_bus_type;
@@ -329,26 +350,31 @@ struct serdev_controller *serdev_controller_alloc(struct device *parent,
 	if (!ctrl)
 		return NULL;
 
-	device_initialize(&ctrl->dev);
-	ctrl->dev.type = &serdev_ctrl_type;
-	ctrl->dev.bus = &serdev_bus_type;
-	ctrl->dev.parent = parent;
-	ctrl->dev.of_node = parent->of_node;
-	serdev_controller_set_drvdata(ctrl, &ctrl[1]);
-
 	id = ida_simple_get(&ctrl_ida, 0, 0, GFP_KERNEL);
 	if (id < 0) {
 		dev_err(parent,
 			"unable to allocate serdev controller identifier.\n");
-		serdev_controller_put(ctrl);
-		return NULL;
+		goto err_free;
 	}
 
 	ctrl->nr = id;
+
+	device_initialize(&ctrl->dev);
+	ctrl->dev.type = &serdev_ctrl_type;
+	ctrl->dev.bus = &serdev_bus_type;
+	ctrl->dev.parent = parent;
+	ctrl->dev.of_node = parent->of_node;
+	serdev_controller_set_drvdata(ctrl, &ctrl[1]);
+
 	dev_set_name(&ctrl->dev, "serial%d", id);
 
 	dev_dbg(&ctrl->dev, "allocated controller 0x%p id %d\n", ctrl, id);
 	return ctrl;
+
+err_free:
+	kfree(ctrl);
+
+	return NULL;
 }
 EXPORT_SYMBOL_GPL(serdev_controller_alloc);
 
@@ -385,6 +411,75 @@ static int of_serdev_register_devices(struct serdev_controller *ctrl)
 	return 0;
 }
 
+#ifdef CONFIG_ACPI
+static acpi_status acpi_serdev_register_device(struct serdev_controller *ctrl,
+					    struct acpi_device *adev)
+{
+	struct serdev_device *serdev = NULL;
+	int err;
+
+	if (acpi_bus_get_status(adev) || !adev->status.present ||
+	    acpi_device_enumerated(adev))
+		return AE_OK;
+
+	serdev = serdev_device_alloc(ctrl);
+	if (!serdev) {
+		dev_err(&ctrl->dev, "failed to allocate serdev device for %s\n",
+			dev_name(&adev->dev));
+		return AE_NO_MEMORY;
+	}
+
+	ACPI_COMPANION_SET(&serdev->dev, adev);
+	acpi_device_set_enumerated(adev);
+
+	err = serdev_device_add(serdev);
+	if (err) {
+		dev_err(&serdev->dev,
+			"failure adding ACPI serdev device. status %d\n", err);
+		serdev_device_put(serdev);
+	}
+
+	return AE_OK;
+}
+
+static acpi_status acpi_serdev_add_device(acpi_handle handle, u32 level,
+				       void *data, void **return_value)
+{
+	struct serdev_controller *ctrl = data;
+	struct acpi_device *adev;
+
+	if (acpi_bus_get_device(handle, &adev))
+		return AE_OK;
+
+	return acpi_serdev_register_device(ctrl, adev);
+}
+
+static int acpi_serdev_register_devices(struct serdev_controller *ctrl)
+{
+	acpi_status status;
+	acpi_handle handle;
+
+	handle = ACPI_HANDLE(ctrl->dev.parent);
+	if (!handle)
+		return -ENODEV;
+
+	status = acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, 1,
+				     acpi_serdev_add_device, NULL, ctrl, NULL);
+	if (ACPI_FAILURE(status))
+		dev_dbg(&ctrl->dev, "failed to enumerate serdev slaves\n");
+
+	if (!ctrl->serdev)
+		return -ENODEV;
+
+	return 0;
+}
+#else
+static inline int acpi_serdev_register_devices(struct serdev_controller *ctrl)
+{
+	return -ENODEV;
+}
+#endif /* CONFIG_ACPI */
+
 /**
  * serdev_controller_add() - Add an serdev controller
  * @ctrl:	controller to be registered.
@@ -394,7 +489,7 @@ static int of_serdev_register_devices(struct serdev_controller *ctrl)
  */
 int serdev_controller_add(struct serdev_controller *ctrl)
 {
-	int ret;
+	int ret_of, ret_acpi, ret;
 
 	/* Can't register until after driver model init */
 	if (WARN_ON(!is_registered))
@@ -404,9 +499,14 @@ int serdev_controller_add(struct serdev_controller *ctrl)
 	if (ret)
 		return ret;
 
-	ret = of_serdev_register_devices(ctrl);
-	if (ret)
+	ret_of = of_serdev_register_devices(ctrl);
+	ret_acpi = acpi_serdev_register_devices(ctrl);
+	if (ret_of && ret_acpi) {
+		dev_dbg(&ctrl->dev, "no devices registered: of:%d acpi:%d\n",
+			ret_of, ret_acpi);
+		ret = -ENODEV;
 		goto out_dev_del;
+	}
 
 	dev_dbg(&ctrl->dev, "serdev%d registered: dev:%p\n",
 		ctrl->nr, &ctrl->dev);

drivers/tty/serdev/serdev-ttyport.c

@@ -1,14 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (C) 2016-2017 Linaro Ltd., Rob Herring <robh@kernel.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 #include <linux/kernel.h>
 #include <linux/serdev.h>
@@ -96,16 +88,21 @@ static int ttyport_open(struct serdev_controller *ctrl)
 	struct serport *serport = serdev_controller_get_drvdata(ctrl);
 	struct tty_struct *tty;
 	struct ktermios ktermios;
+	int ret;
 
 	tty = tty_init_dev(serport->tty_drv, serport->tty_idx);
 	if (IS_ERR(tty))
 		return PTR_ERR(tty);
 	serport->tty = tty;
 
-	if (tty->ops->open)
-		tty->ops->open(serport->tty, NULL);
-	else
-		tty_port_open(serport->port, tty, NULL);
+	if (!tty->ops->open || !tty->ops->close) {
+		ret = -ENODEV;
+		goto err_unlock;
+	}
+
+	ret = tty->ops->open(serport->tty, NULL);
+	if (ret)
+		goto err_close;
 
 	/* Bring the UART into a known 8 bits no parity hw fc state */
 	ktermios = tty->termios;
@@ -122,6 +119,14 @@ static int ttyport_open(struct serdev_controller *ctrl)
 
 	tty_unlock(serport->tty);
 	return 0;
+
+err_close:
+	tty->ops->close(tty, NULL);
+err_unlock:
+	tty_unlock(tty);
+	tty_release_struct(tty, serport->tty_idx);
+
+	return ret;
 }
 
 static void ttyport_close(struct serdev_controller *ctrl)

drivers/tty/serial/21285.c

@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Driver for the serial port on the 21285 StrongArm-110 core logic chip.
  *

drivers/tty/serial/8250/8250.h

@@ -1,14 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  *  Driver for 8250/16550-type serial ports
  *
  *  Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
  *
  *  Copyright (C) 2001 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 
 #include <linux/serial_8250.h>

drivers/tty/serial/8250/8250_accent.c

@@ -1,10 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  *  Copyright (C) 2005 Russell King.
  *  Data taken from include/asm-i386/serial.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 #include <linux/module.h>
 #include <linux/init.h>

drivers/tty/serial/8250/8250_acorn.c

@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  *  linux/drivers/serial/acorn.c
  *
  *  Copyright (C) 1996-2003 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 #include <linux/module.h>
 #include <linux/types.h>

drivers/tty/serial/8250/8250_aspeed_vuart.c

@@ -1,13 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  *  Serial Port driver for Aspeed VUART device
  *
  *    Copyright (C) 2016 Jeremy Kerr <jk@ozlabs.org>, IBM Corp.
  *    Copyright (C) 2006 Arnd Bergmann <arnd@arndb.de>, IBM Corp.
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
  */
 #include <linux/device.h>
 #include <linux/module.h>

drivers/tty/serial/8250/8250_bcm2835aux.c

@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Serial port driver for BCM2835AUX UART
  *
@@ -5,11 +6,6 @@
  *
  * Based on 8250_lpc18xx.c:
  * Copyright (C) 2015 Joachim Eastwood <manabian@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
  */
 
 #include <linux/clk.h>

drivers/tty/serial/8250/8250_boca.c

@@ -1,10 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  *  Copyright (C) 2005 Russell King.
  *  Data taken from include/asm-i386/serial.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 #include <linux/module.h>
 #include <linux/init.h>

drivers/tty/serial/8250/8250_core.c

@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  *  Universal/legacy driver for 8250/16550-type serial ports
  *
@@ -11,11 +12,6 @@
  *	      userspace-configurable "phantom" ports
  *	      "serial8250" platform devices
  *	      serial8250_register_8250_port() ports
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 
 #include <linux/module.h>
@@ -262,17 +258,17 @@ static void serial_unlink_irq_chain(struct uart_8250_port *up)
  * barely passable results for a 16550A.  (Although at the expense
  * of much CPU overhead).
  */
-static void serial8250_timeout(unsigned long data)
+static void serial8250_timeout(struct timer_list *t)
 {
-	struct uart_8250_port *up = (struct uart_8250_port *)data;
+	struct uart_8250_port *up = from_timer(up, t, timer);
 
 	up->port.handle_irq(&up->port);
 	mod_timer(&up->timer, jiffies + uart_poll_timeout(&up->port));
 }
 
-static void serial8250_backup_timeout(unsigned long data)
+static void serial8250_backup_timeout(struct timer_list *t)
 {
-	struct uart_8250_port *up = (struct uart_8250_port *)data;
+	struct uart_8250_port *up = from_timer(up, t, timer);
 	unsigned int iir, ier = 0, lsr;
 	unsigned long flags;
 
@@ -329,8 +325,7 @@ static int univ8250_setup_irq(struct uart_8250_port *up)
 	if (up->bugs & UART_BUG_THRE) {
 		pr_debug("ttyS%d - using backup timer\n", serial_index(port));
 
-		up->timer.function = serial8250_backup_timeout;
-		up->timer.data = (unsigned long)up;
+		up->timer.function = (TIMER_FUNC_TYPE)serial8250_backup_timeout;
 		mod_timer(&up->timer, jiffies +
 			  uart_poll_timeout(port) + HZ / 5);
 	}
@@ -341,7 +336,6 @@ static int univ8250_setup_irq(struct uart_8250_port *up)
 	 * driver used to do this with IRQ0.
 	 */
 	if (!port->irq) {
-		up->timer.data = (unsigned long)up;
 		mod_timer(&up->timer, jiffies + uart_poll_timeout(port));
 	} else
 		retval = serial_link_irq_chain(up);
@@ -354,7 +348,7 @@ static void univ8250_release_irq(struct uart_8250_port *up)
 	struct uart_port *port = &up->port;
 
 	del_timer_sync(&up->timer);
-	up->timer.function = serial8250_timeout;
+	up->timer.function = (TIMER_FUNC_TYPE)serial8250_timeout;
 	if (port->irq)
 		serial_unlink_irq_chain(up);
 }
@@ -525,8 +519,7 @@ static void __init serial8250_isa_init_ports(void)
 			base_ops = port->ops;
 		port->ops = &univ8250_port_ops;
 
-		init_timer(&up->timer);
-		up->timer.function = serial8250_timeout;
+		timer_setup(&up->timer, serial8250_timeout, 0);
 
 		up->ops = &univ8250_driver_ops;
 

drivers/tty/serial/8250/8250_dma.c

@@ -1,12 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * 8250_dma.c - DMA Engine API support for 8250.c
  *
  * Copyright (C) 2013 Intel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 #include <linux/tty.h>
 #include <linux/tty_flip.h>

drivers/tty/serial/8250/8250_dw.c

@@ -1,14 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Synopsys DesignWare 8250 driver.
  *
  * Copyright 2011 Picochip, Jamie Iles.
  * Copyright 2013 Intel Corporation
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
  * The Synopsys DesignWare 8250 has an extra feature whereby it detects if the
  * LCR is written whilst busy.  If it is, then a busy detect interrupt is
  * raised, the LCR needs to be rewritten and the uart status register read.
@@ -256,25 +252,31 @@ static void dw8250_set_termios(struct uart_port *p, struct ktermios *termios,
 			       struct ktermios *old)
 {
 	unsigned int baud = tty_termios_baud_rate(termios);
+	unsigned int target_rate, min_rate, max_rate;
 	struct dw8250_data *d = p->private_data;
 	long rate;
-	int ret;
+	int i, ret;
 
 	if (IS_ERR(d->clk) || !old)
 		goto out;
 
-	clk_disable_unprepare(d->clk);
-	rate = clk_round_rate(d->clk, baud * 16);
-	if (rate < 0)
-		ret = rate;
-	else if (rate == 0)
-		ret = -ENOENT;
-	else
-		ret = clk_set_rate(d->clk, rate);
-	clk_prepare_enable(d->clk);
+	/* Find a clk rate within +/-1.6% of an integer multiple of baudx16 */
+	target_rate = baud * 16;
+	min_rate = target_rate - (target_rate >> 6);
+	max_rate = target_rate + (target_rate >> 6);
 
-	if (!ret)
-		p->uartclk = rate;
+	for (i = 1; i <= UART_DIV_MAX; i++) {
+		rate = clk_round_rate(d->clk, i * target_rate);
+		if (rate >= i * min_rate && rate <= i * max_rate)
+			break;
+	}
+	if (i <= UART_DIV_MAX) {
+		clk_disable_unprepare(d->clk);
+		ret = clk_set_rate(d->clk, rate);
+		clk_prepare_enable(d->clk);
+		if (!ret)
+			p->uartclk = rate;
+	}
 
 out:
 	p->status &= ~UPSTAT_AUTOCTS;

drivers/tty/serial/8250/8250_early.c

@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Early serial console for 8250/16550 devices
  *
  * (c) Copyright 2004 Hewlett-Packard Development Company, L.P.
  *	Bjorn Helgaas <bjorn.helgaas@hp.com>
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
  * Based on the 8250.c serial driver, Copyright (C) 2001 Russell King,
  * and on early_printk.c by Andi Kleen.
  *

drivers/tty/serial/8250/8250_em.c

@@ -1,20 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Renesas Emma Mobile 8250 driver
  *
  *  Copyright (C) 2012 Magnus Damm
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/device.h>

drivers/tty/serial/8250/8250_exar.c

@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  *  Probe module for 8250/16550-type Exar chips PCI serial ports.
  *
  *  Based on drivers/tty/serial/8250/8250_pci.c,
  *
  *  Copyright (C) 2017 Sudip Mukherjee, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License.
  */
 #include <linux/acpi.h>
 #include <linux/dmi.h>

drivers/tty/serial/8250/8250_exar_st16c554.c

@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  *  Written by Paul B Schroeder < pschroeder "at" uplogix "dot" com >
  *  Based on 8250_boca.
  *
  *  Copyright (C) 2005 Russell King.
  *  Data taken from include/asm-i386/serial.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 #include <linux/module.h>
 #include <linux/init.h>

drivers/tty/serial/8250/8250_fintek.c

@@ -1,12 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  *  Probe for F81216A LPC to 4 UART
  *
  *  Copyright (C) 2014-2016 Ricardo Ribalda, Qtechnology A/S
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License.
  */
 #include <linux/module.h>
 #include <linux/pci.h>
@@ -40,6 +36,16 @@
 #define IRQ_LEVEL_LOW	0
 #define IRQ_EDGE_HIGH	BIT(5)
 
+/*
+ * F81216H clock source register, the value and mask is the same with F81866,
+ * but it's on F0h.
+ *
+ * Clock speeds for UART (register F0h)
+ * 00: 1.8432MHz.
+ * 01: 18.432MHz.
+ * 10: 24MHz.
+ * 11: 14.769MHz.
+ */
 #define RS485  0xF0
 #define RTS_INVERT BIT(5)
 #define RS485_URA BIT(4)
@@ -118,6 +124,9 @@ static int fintek_8250_enter_key(u16 base_port, u8 key)
 	if (!request_muxed_region(base_port, 2, "8250_fintek"))
 		return -EBUSY;
 
+	/* Force to deactive all SuperIO in this base_port */
+	outb(EXIT_KEY, base_port + ADDR_PORT);
+
 	outb(key, base_port + ADDR_PORT);
 	outb(key, base_port + ADDR_PORT);
 	return 0;
@@ -188,14 +197,27 @@ static int fintek_8250_rs485_config(struct uart_port *port,
 	if (!pdata)
 		return -EINVAL;
 
-	if (rs485->flags & SER_RS485_ENABLED)
+	/* Hardware do not support same RTS level on send and receive */
+	if (!(rs485->flags & SER_RS485_RTS_ON_SEND) ==
+			!(rs485->flags & SER_RS485_RTS_AFTER_SEND))
+		return -EINVAL;
+
+	if (rs485->flags & SER_RS485_ENABLED) {
 		memset(rs485->padding, 0, sizeof(rs485->padding));
-	else
+		config |= RS485_URA;
+	} else {
 		memset(rs485, 0, sizeof(*rs485));
+	}
 
 	rs485->flags &= SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND |
 			SER_RS485_RTS_AFTER_SEND;
 
+	/* Only the first port supports delays */
+	if (pdata->index) {
+		rs485->delay_rts_before_send = 0;
+		rs485->delay_rts_after_send = 0;
+	}
+
 	if (rs485->delay_rts_before_send) {
 		rs485->delay_rts_before_send = 1;
 		config |= TXW4C_IRA;
@@ -206,12 +228,6 @@ static int fintek_8250_rs485_config(struct uart_port *port,
 		config |= RXW4C_IRA;
 	}
 
-	if ((!!(rs485->flags & SER_RS485_RTS_ON_SEND)) ==
-			(!!(rs485->flags & SER_RS485_RTS_AFTER_SEND)))
-		rs485->flags &= SER_RS485_ENABLED;
-	else
-		config |= RS485_URA;
-
 	if (rs485->flags & SER_RS485_RTS_ON_SEND)
 		config |= RTS_INVERT;
 
@@ -280,13 +296,91 @@ static void fintek_8250_goto_highspeed(struct uart_8250_port *uart,
 			F81866_UART_CLK_MASK,
 			F81866_UART_CLK_14_769MHZ);
 
-			uart->port.uartclk = 921600 * 16;
+		uart->port.uartclk = 921600 * 16;
 		break;
 	default: /* leave clock speed untouched */
 		break;
 	}
 }
 
+void fintek_8250_set_termios(struct uart_port *port, struct ktermios *termios,
+			struct ktermios *old)
+{
+	struct fintek_8250 *pdata = port->private_data;
+	unsigned int baud = tty_termios_baud_rate(termios);
+	int i;
+	u8 reg;
+	static u32 baudrate_table[] = {115200, 921600, 1152000, 1500000};
+	static u8 clock_table[] = { F81866_UART_CLK_1_8432MHZ,
+			F81866_UART_CLK_14_769MHZ, F81866_UART_CLK_18_432MHZ,
+			F81866_UART_CLK_24MHZ };
+
+	/*
+	 * We'll use serial8250_do_set_termios() for baud = 0, otherwise It'll
+	 * crash on baudrate_table[i] % baud with "division by zero".
+	 */
+	if (!baud)
+		goto exit;
+
+	switch (pdata->pid) {
+	case CHIP_ID_F81216H:
+		reg = RS485;
+		break;
+	case CHIP_ID_F81866:
+		reg = F81866_UART_CLK;
+		break;
+	default:
+		/* Don't change clocksource with unknown PID */
+		dev_warn(port->dev,
+			"%s: pid: %x Not support. use default set_termios.\n",
+			__func__, pdata->pid);
+		goto exit;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(baudrate_table); ++i) {
+		if (baud > baudrate_table[i] || baudrate_table[i] % baud != 0)
+			continue;
+
+		if (port->uartclk == baudrate_table[i] * 16)
+			break;
+
+		if (fintek_8250_enter_key(pdata->base_port, pdata->key))
+			continue;
+
+		port->uartclk = baudrate_table[i] * 16;
+
+		sio_write_reg(pdata, LDN, pdata->index);
+		sio_write_mask_reg(pdata, reg, F81866_UART_CLK_MASK,
+				clock_table[i]);
+
+		fintek_8250_exit_key(pdata->base_port);
+		break;
+	}
+
+	if (i == ARRAY_SIZE(baudrate_table)) {
+		baud = tty_termios_baud_rate(old);
+		tty_termios_encode_baud_rate(termios, baud, baud);
+	}
+
+exit:
+	serial8250_do_set_termios(port, termios, old);
+}
+
+static void fintek_8250_set_termios_handler(struct uart_8250_port *uart)
+{
+	struct fintek_8250 *pdata = uart->port.private_data;
+
+	switch (pdata->pid) {
+	case CHIP_ID_F81216H:
+	case CHIP_ID_F81866:
+		uart->port.set_termios = fintek_8250_set_termios;
+		break;
+
+	default:
+		break;
+	}
+}
+
 static int probe_setup_port(struct fintek_8250 *pdata,
 					struct uart_8250_port *uart)
 {
@@ -373,6 +467,7 @@ int fintek_8250_probe(struct uart_8250_port *uart)
 	memcpy(pdata, &probe_data, sizeof(probe_data));
 	uart->port.private_data = pdata;
 	fintek_8250_set_rs485_handler(uart);
+	fintek_8250_set_termios_handler(uart);
 
 	return 0;
 }

drivers/tty/serial/8250/8250_fourport.c

@@ -1,10 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  *  Copyright (C) 2005 Russell King.
  *  Data taken from include/asm-i386/serial.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 #include <linux/module.h>
 #include <linux/init.h>

drivers/tty/serial/8250/8250_fsl.c

@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 #include <linux/serial_reg.h>
 #include <linux/serial_8250.h>
 
@@ -6,10 +7,6 @@
 /*
  * Freescale 16550 UART "driver", Copyright (C) 2011 Paul Gortmaker.
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
  * This isn't a full driver; it just provides an alternate IRQ
  * handler to deal with an errata.  Everything else is just
  * using the bog standard 8250 support.

drivers/tty/serial/8250/8250_gsc.c

@@ -1,12 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  *	Serial Device Initialisation for Lasi/Asp/Wax/Dino
  *
  *	(c) Copyright Matthew Wilcox <willy@debian.org> 2001-2002
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *      the Free Software Foundation; either version 2 of the License, or
- *      (at your option) any later version.
  */
 
 #include <linux/errno.h>

drivers/tty/serial/8250/8250_hp300.c

@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Driver for the 98626/98644/internal serial interface on hp300/hp400
  * (based on the National Semiconductor INS8250/NS16550AF/WD16C552 UARTs)

drivers/tty/serial/8250/8250_hub6.c

@@ -1,10 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  *  Copyright (C) 2005 Russell King.
  *  Data taken from include/asm-i386/serial.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 #include <linux/module.h>
 #include <linux/init.h>

drivers/tty/serial/8250/8250_ingenic.c

@@ -1,17 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright (C) 2010 Lars-Peter Clausen <lars@metafoo.de>
  * Copyright (C) 2015 Imagination Technologies
  *
  * Ingenic SoC UART support
- *
- * This program is free software; you can redistribute	 it and/or modify it
- * under  the terms of	 the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the	License, or (at your
- * option) any later version.
- *
- * You should have received a copy of the  GNU General Public License along
- * with this program; if not, write  to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 #include <linux/clk.h>

drivers/tty/serial/8250/8250_lpc18xx.c

@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Serial port driver for NXP LPC18xx/43xx UART
  *
@@ -6,11 +7,6 @@
  * Based on 8250_mtk.c:
  * Copyright (c) 2014 MundoReader S.L.
  * Matthias Brugger <matthias.bgg@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
  */
 
 #include <linux/clk.h>

drivers/tty/serial/8250/8250_lpss.c

@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * 8250_lpss.c - Driver for UART on Intel Braswell and various other Intel SoCs
  *
  * Copyright (C) 2016 Intel Corporation
  * Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #include <linux/bitops.h>

drivers/tty/serial/8250/8250_mid.c

@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * 8250_mid.c - Driver for UART on Intel Penwell and various other Intel SOCs
  *
  * Copyright (C) 2015 Intel Corporation
  * Author: Heikki Krogerus <heikki.krogerus@linux.intel.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #include <linux/bitops.h>
@@ -23,10 +20,11 @@
 #define PCI_DEVICE_ID_INTEL_PNW_UART2	0x081c
 #define PCI_DEVICE_ID_INTEL_PNW_UART3	0x081d
 #define PCI_DEVICE_ID_INTEL_TNG_UART	0x1191
+#define PCI_DEVICE_ID_INTEL_CDF_UART	0x18d8
 #define PCI_DEVICE_ID_INTEL_DNV_UART	0x19d8
 
 /* Intel MID Specific registers */
-#define INTEL_MID_UART_DNV_FISR		0x08
+#define INTEL_MID_UART_FISR		0x08
 #define INTEL_MID_UART_PS		0x30
 #define INTEL_MID_UART_MUL		0x34
 #define INTEL_MID_UART_DIV		0x38
@@ -130,7 +128,7 @@ static int dnv_handle_irq(struct uart_port *p)
 {
 	struct mid8250 *mid = p->private_data;
 	struct uart_8250_port *up = up_to_u8250p(p);
-	unsigned int fisr = serial_port_in(p, INTEL_MID_UART_DNV_FISR);
+	unsigned int fisr = serial_port_in(p, INTEL_MID_UART_FISR);
 	u32 status;
 	int ret = 0;
 	int err;
@@ -377,6 +375,7 @@ static const struct pci_device_id pci_ids[] = {
 	MID_DEVICE(PCI_DEVICE_ID_INTEL_PNW_UART2, pnw_board),
 	MID_DEVICE(PCI_DEVICE_ID_INTEL_PNW_UART3, pnw_board),
 	MID_DEVICE(PCI_DEVICE_ID_INTEL_TNG_UART, tng_board),
+	MID_DEVICE(PCI_DEVICE_ID_INTEL_CDF_UART, dnv_board),
 	MID_DEVICE(PCI_DEVICE_ID_INTEL_DNV_UART, dnv_board),
 	{ },
 };

drivers/tty/serial/8250/8250_moxa.c

@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * 8250_moxa.c - MOXA Smartio/Industio MUE multiport serial driver.
  *
  * Author: Mathieu OTHACEHE <m.othacehe@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #include <linux/module.h>

drivers/tty/serial/8250/8250_mtk.c

@@ -1,18 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Mediatek 8250 driver.
  *
  * Copyright (c) 2014 MundoReader S.L.
  * Author: Matthias Brugger <matthias.bgg@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 #include <linux/clk.h>
 #include <linux/io.h>
@@ -61,7 +52,7 @@ mtk8250_set_termios(struct uart_port *port, struct ktermios *termios,
 	 * registers to their default values.
 	 */
 	baud = uart_get_baud_rate(port, termios, old,
-				  port->uartclk / 16 / 0xffff,
+				  port->uartclk / 16 / UART_DIV_MAX,
 				  port->uartclk);
 
 	if (baud <= 115200) {

drivers/tty/serial/8250/8250_of.c

@@ -1,13 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  *  Serial Port driver for Open Firmware platform devices
  *
  *    Copyright (C) 2006 Arnd Bergmann <arnd@arndb.de>, IBM Corp.
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
  */
 #include <linux/console.h>
 #include <linux/module.h>

drivers/tty/serial/8250/8250_omap.c

@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * 8250-core based driver for the OMAP internal UART
  *
@@ -199,7 +200,7 @@ static void omap_8250_get_divisor(struct uart_port *port, unsigned int baud,
 	 * Old custom speed handling.
 	 */
 	if (baud == 38400 && (port->flags & UPF_SPD_MASK) == UPF_SPD_CUST) {
-		priv->quot = port->custom_divisor & 0xffff;
+		priv->quot = port->custom_divisor & UART_DIV_MAX;
 		/*
 		 * I assume that nobody is using this. But hey, if somebody
 		 * would like to specify the divisor _and_ the mode then the
@@ -358,7 +359,7 @@ static void omap_8250_set_termios(struct uart_port *port,
 	 * Ask the core to calculate the divisor for us.
 	 */
 	baud = uart_get_baud_rate(port, termios, old,
-				  port->uartclk / 16 / 0xffff,
+				  port->uartclk / 16 / UART_DIV_MAX,
 				  port->uartclk / 13);
 	omap_8250_get_divisor(port, baud, priv);
 

drivers/tty/serial/8250/8250_pci.c

@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  *  Probe module for 8250/16550-type PCI serial ports.
  *
  *  Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
  *
  *  Copyright (C) 2001 Russell King, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License.
  */
 #undef DEBUG
 #include <linux/module.h>
@@ -3368,6 +3365,7 @@ static const struct pci_device_id blacklist[] = {
 	{ PCI_VDEVICE(INTEL, 0x081c), },
 	{ PCI_VDEVICE(INTEL, 0x081d), },
 	{ PCI_VDEVICE(INTEL, 0x1191), },
+	{ PCI_VDEVICE(INTEL, 0x18d8), },
 	{ PCI_VDEVICE(INTEL, 0x19d8), },
 
 	/* Intel platforms with DesignWare UART */

drivers/tty/serial/8250/8250_pnp.c

@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  *  Probe for 8250/16550-type ISAPNP serial ports.
  *
@@ -6,10 +7,6 @@
  *  Copyright (C) 2001 Russell King, All Rights Reserved.
  *
  *  Ported to the Linux PnP Layer - (C) Adam Belay.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License.
  */
 #include <linux/module.h>
 #include <linux/pci.h>

drivers/tty/serial/8250/8250_port.c

@@ -1,14 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  *  Base port operations for 8250/16550-type serial ports
  *
  *  Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
  *  Split from 8250_core.c, Copyright (C) 2001 Russell King.
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
  * A note about mapbase / membase
  *
  *  mapbase is the physical address of the IO port.
@@ -1516,7 +1512,6 @@ static inline void __stop_tx(struct uart_8250_port *p)
 			return;
 
 		em485->active_timer = NULL;
-		hrtimer_cancel(&em485->start_tx_timer);
 
 		__stop_tx_rs485(p);
 	}
@@ -1580,8 +1575,6 @@ static inline void start_tx_rs485(struct uart_port *port)
 		serial8250_stop_rx(&up->port);
 
 	em485->active_timer = NULL;
-	if (hrtimer_is_queued(&em485->stop_tx_timer))
-		hrtimer_cancel(&em485->stop_tx_timer);
 
 	mcr = serial8250_in_MCR(up);
 	if (!!(up->port.rs485.flags & SER_RS485_RTS_ON_SEND) !=
@@ -2586,8 +2579,11 @@ static void serial8250_set_divisor(struct uart_port *port, unsigned int baud,
 	serial_dl_write(up, quot);
 
 	/* XR17V35x UARTs have an extra fractional divisor register (DLD) */
-	if (up->port.type == PORT_XR17V35X)
+	if (up->port.type == PORT_XR17V35X) {
+		/* Preserve bits not related to baudrate; DLD[7:4]. */
+		quot_frac |= serial_port_in(port, 0x2) & 0xf0;
 		serial_port_out(port, 0x2, quot_frac);
+	}
 }
 
 static unsigned int serial8250_get_baud_rate(struct uart_port *port,
@@ -2601,7 +2597,7 @@ static unsigned int serial8250_get_baud_rate(struct uart_port *port,
 	 * causing transmission errors.
 	 */
 	return uart_get_baud_rate(port, termios, old,
-				  port->uartclk / 16 / 0xffff,
+				  port->uartclk / 16 / UART_DIV_MAX,
 				  port->uartclk);
 }
 

drivers/tty/serial/8250/8250_pxa.c

@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  *  drivers/tty/serial/8250/8250_pxa.c -- driver for PXA on-board UARTS
  *  Copyright:	(C) 2013 Sergei Ianovich <ynvich@gmail.com>
@@ -7,12 +8,6 @@
  *  Copyright:	(C) 2003 Monta Vista Software, Inc.
  *
  *  Based on drivers/serial/8250.c by Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
  */
 
 #include <linux/device.h>

drivers/tty/serial/8250/8250_uniphier.c

@@ -1,15 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #include <linux/clk.h>

drivers/tty/serial/8250/serial_cs.c

@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MPL-1.1)
 /*======================================================================
 
     A driver for PCMCIA serial devices

drivers/tty/serial/altera_jtaguart.c

@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * altera_jtaguart.c -- Altera JTAG UART driver
  *
@@ -6,11 +7,6 @@
  * (C) Copyright 2003-2007, Greg Ungerer <gerg@snapgear.com>
  * (C) Copyright 2008, Thomas Chou <thomas@wytron.com.tw>
  * (C) Copyright 2010, Tobias Klauser <tklauser@distanz.ch>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 
 #include <linux/kernel.h>

drivers/tty/serial/altera_uart.c

@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * altera_uart.c -- Altera UART driver
  *
@@ -6,11 +7,6 @@
  * (C) Copyright 2003-2007, Greg Ungerer <gerg@snapgear.com>
  * (C) Copyright 2008, Thomas Chou <thomas@wytron.com.tw>
  * (C) Copyright 2010, Tobias Klauser <tklauser@distanz.ch>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 
 #include <linux/kernel.h>
@@ -288,10 +284,10 @@ static irqreturn_t altera_uart_interrupt(int irq, void *data)
 	return IRQ_RETVAL(isr);
 }
 
-static void altera_uart_timer(unsigned long data)
+static void altera_uart_timer(struct timer_list *t)
 {
-	struct uart_port *port = (void *)data;
-	struct altera_uart *pp = container_of(port, struct altera_uart, port);
+	struct altera_uart *pp = from_timer(pp, t, tmr);
+	struct uart_port *port = &pp->port;
 
 	altera_uart_interrupt(0, port);
 	mod_timer(&pp->tmr, jiffies + uart_poll_timeout(port));
@@ -314,7 +310,7 @@ static int altera_uart_startup(struct uart_port *port)
 	int ret;
 
 	if (!port->irq) {
-		setup_timer(&pp->tmr, altera_uart_timer, (unsigned long)port);
+		timer_setup(&pp->tmr, altera_uart_timer, 0);
 		mod_timer(&pp->tmr, jiffies + uart_poll_timeout(port));
 		return 0;
 	}

drivers/tty/serial/amba-pl010.c

@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  *  Driver for AMBA serial ports
  *
@@ -6,20 +7,6 @@
  *  Copyright 1999 ARM Limited
  *  Copyright (C) 2000 Deep Blue Solutions Ltd.
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
  * This is a generic driver for ARM AMBA-type serial ports.  They
  * have a lot of 16550-like features, but are not register compatible.
  * Note that although they do have CTS, DCD and DSR inputs, they do

drivers/tty/serial/amba-pl011.c

@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  *  Driver for AMBA serial ports
  *
@@ -7,20 +8,6 @@
  *  Copyright (C) 2000 Deep Blue Solutions Ltd.
  *  Copyright (C) 2010 ST-Ericsson SA
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
  * This is a generic driver for ARM AMBA-type serial ports.  They
  * have a lot of 16550-like features, but are not register compatible.
  * Note that although they do have CTS, DCD and DSR inputs, they do
@@ -281,7 +268,6 @@ struct uart_amba_port {
 	unsigned int		old_status;
 	unsigned int		fifosize;	/* vendor-specific */
 	unsigned int		old_cr;		/* state during shutdown */
-	bool			autorts;
 	unsigned int		fixed_baud;	/* vendor-set fixed baud rate */
 	char			type[12];
 #ifdef CONFIG_DMA_ENGINE
@@ -1078,9 +1064,9 @@ static inline void pl011_dma_rx_stop(struct uart_amba_port *uap)
  * Every polling, It checks the residue in the dma buffer and transfer
  * data to the tty. Also, last_residue is updated for the next polling.
  */
-static void pl011_dma_rx_poll(unsigned long args)
+static void pl011_dma_rx_poll(struct timer_list *t)
 {
-	struct uart_amba_port *uap = (struct uart_amba_port *)args;
+	struct uart_amba_port *uap = from_timer(uap, t, dmarx.timer);
 	struct tty_port *port = &uap->port.state->port;
 	struct pl011_dmarx_data *dmarx = &uap->dmarx;
 	struct dma_chan *rxchan = uap->dmarx.chan;
@@ -1192,9 +1178,7 @@ skip_rx:
 			dev_dbg(uap->port.dev, "could not trigger initial "
 				"RX DMA job, fall back to interrupt mode\n");
 		if (uap->dmarx.poll_rate) {
-			init_timer(&(uap->dmarx.timer));
-			uap->dmarx.timer.function = pl011_dma_rx_poll;
-			uap->dmarx.timer.data = (unsigned long)uap;
+			timer_setup(&uap->dmarx.timer, pl011_dma_rx_poll, 0);
 			mod_timer(&uap->dmarx.timer,
 				jiffies +
 				msecs_to_jiffies(uap->dmarx.poll_rate));
@@ -1588,7 +1572,7 @@ static void pl011_set_mctrl(struct uart_port *port, unsigned int mctrl)
 	TIOCMBIT(TIOCM_OUT2, UART011_CR_OUT2);
 	TIOCMBIT(TIOCM_LOOP, UART011_CR_LBE);
 
-	if (uap->autorts) {
+	if (port->status & UPSTAT_AUTORTS) {
 		/* We need to disable auto-RTS if we want to turn RTS off */
 		TIOCMBIT(TIOCM_RTS, UART011_CR_RTSEN);
 	}
@@ -1842,7 +1826,7 @@ static void pl011_disable_uart(struct uart_amba_port *uap)
 {
 	unsigned int cr;
 
-	uap->autorts = false;
+	uap->port.status &= ~(UPSTAT_AUTOCTS | UPSTAT_AUTORTS);
 	spin_lock_irq(&uap->port.lock);
 	cr = pl011_read(uap, REG_CR);
 	uap->old_cr = cr;
@@ -2028,10 +2012,10 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios,
 			old_cr |= UART011_CR_RTSEN;
 
 		old_cr |= UART011_CR_CTSEN;
-		uap->autorts = true;
+		port->status |= UPSTAT_AUTOCTS | UPSTAT_AUTORTS;
 	} else {
 		old_cr &= ~(UART011_CR_CTSEN | UART011_CR_RTSEN);
-		uap->autorts = false;
+		port->status &= ~(UPSTAT_AUTOCTS | UPSTAT_AUTORTS);
 	}
 
 	if (uap->vendor->oversampling) {

drivers/tty/serial/apbuart.c

@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  *  Driver for GRLIB serial ports (APBUART)
  *

drivers/tty/serial/ar933x_uart.c

@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  *  Atheros AR933X SoC built-in UART driver
  *
  *  Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
  *
  *  Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
  */
 
 #include <linux/module.h>

drivers/tty/serial/arc_uart.c

@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * ARC On-Chip(fpga) UART Driver
  *
  * Copyright (C) 2010-2012 Synopsys, Inc. (www.synopsys.com)
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
  * vineetg: July 10th 2012
  *  -Decoupled the driver from arch/arc
  *    +Using platform_get_resource() for irq/membase (thx to bfin_uart.c)

drivers/tty/serial/atmel_serial.c

@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  *  Driver for Atmel AT91 Serial ports
  *  Copyright (C) 2003 Rick Bronson
@@ -6,21 +7,6 @@
  *  Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
  *
  *  DMA support added by Chip Coldwell.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
  */
 #include <linux/tty.h>
 #include <linux/ioport.h>
@@ -171,6 +157,7 @@ struct atmel_uart_port {
 	bool			has_hw_timer;
 	struct timer_list	uart_timer;
 
+	bool			tx_stopped;
 	bool			suspended;
 	unsigned int		pending;
 	unsigned int		pending_status;
@@ -380,6 +367,10 @@ static int atmel_config_rs485(struct uart_port *port,
  */
 static u_int atmel_tx_empty(struct uart_port *port)
 {
+	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+
+	if (atmel_port->tx_stopped)
+		return TIOCSER_TEMT;
 	return (atmel_uart_readl(port, ATMEL_US_CSR) & ATMEL_US_TXEMPTY) ?
 		TIOCSER_TEMT :
 		0;
@@ -485,6 +476,7 @@ static void atmel_stop_tx(struct uart_port *port)
 	 * is fully transmitted.
 	 */
 	atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_TXDIS);
+	atmel_port->tx_stopped = true;
 
 	/* Disable interrupts */
 	atmel_uart_writel(port, ATMEL_US_IDR, atmel_port->tx_done_mask);
@@ -521,6 +513,7 @@ static void atmel_start_tx(struct uart_port *port)
 
 	/* re-enable the transmitter */
 	atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_TXEN);
+	atmel_port->tx_stopped = false;
 }
 
 /*
@@ -1178,10 +1171,11 @@ chan_err:
 	return -EINVAL;
 }
 
-static void atmel_uart_timer_callback(unsigned long data)
+static void atmel_uart_timer_callback(struct timer_list *t)
 {
-	struct uart_port *port = (void *)data;
-	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+	struct atmel_uart_port *atmel_port = from_timer(atmel_port, t,
+							uart_timer);
+	struct uart_port *port = &atmel_port->uart;
 
 	if (!atomic_read(&atmel_port->tasklet_shutdown)) {
 		tasklet_schedule(&atmel_port->tasklet_rx);
@@ -1667,29 +1661,6 @@ static void atmel_init_property(struct atmel_uart_port *atmel_port,
 	}
 }
 
-static void atmel_init_rs485(struct uart_port *port,
-				struct platform_device *pdev)
-{
-	struct device_node *np = pdev->dev.of_node;
-
-	struct serial_rs485 *rs485conf = &port->rs485;
-	u32 rs485_delay[2];
-
-	/* rs485 properties */
-	if (of_property_read_u32_array(np, "rs485-rts-delay",
-				       rs485_delay, 2) == 0) {
-		rs485conf->delay_rts_before_send = rs485_delay[0];
-		rs485conf->delay_rts_after_send = rs485_delay[1];
-		rs485conf->flags = 0;
-	}
-
-	if (of_get_property(np, "rs485-rx-during-tx", NULL))
-		rs485conf->flags |= SER_RS485_RX_DURING_TX;
-
-	if (of_get_property(np, "linux,rs485-enabled-at-boot-time", NULL))
-		rs485conf->flags |= SER_RS485_ENABLED;
-}
-
 static void atmel_set_ops(struct uart_port *port)
 {
 	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
@@ -1866,10 +1837,9 @@ static int atmel_startup(struct uart_port *port)
 	atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_RSTSTA | ATMEL_US_RSTRX);
 	/* enable xmit & rcvr */
 	atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_TXEN | ATMEL_US_RXEN);
+	atmel_port->tx_stopped = false;
 
-	setup_timer(&atmel_port->uart_timer,
-			atmel_uart_timer_callback,
-			(unsigned long)port);
+	timer_setup(&atmel_port->uart_timer, atmel_uart_timer_callback, 0);
 
 	if (atmel_use_pdc_rx(port)) {
 		/* set UART timeout */
@@ -2122,6 +2092,7 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios,
 
 	/* disable receiver and transmitter */
 	atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_TXDIS | ATMEL_US_RXDIS);
+	atmel_port->tx_stopped = true;
 
 	/* mode */
 	if (port->rs485.flags & SER_RS485_ENABLED) {
@@ -2207,6 +2178,7 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios,
 	atmel_uart_writel(port, ATMEL_US_BRGR, quot);
 	atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_RSTSTA | ATMEL_US_RSTRX);
 	atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_TXEN | ATMEL_US_RXEN);
+	atmel_port->tx_stopped = false;
 
 	/* restore interrupts */
 	atmel_uart_writel(port, ATMEL_US_IER, imr);
@@ -2373,7 +2345,7 @@ static int atmel_init_port(struct atmel_uart_port *atmel_port,
 	atmel_init_property(atmel_port, pdev);
 	atmel_set_ops(port);
 
-	atmel_init_rs485(port, pdev);
+	of_get_rs485_mode(pdev->dev.of_node, &port->rs485);
 
 	port->iotype		= UPIO_MEM;
 	port->flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP;
@@ -2450,6 +2422,7 @@ static void atmel_console_write(struct console *co, const char *s, u_int count)
 
 	/* Make sure that tx path is actually able to send characters */
 	atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_TXEN);
+	atmel_port->tx_stopped = false;
 
 	uart_console_write(port, s, count, atmel_console_putchar);
 
@@ -2511,6 +2484,7 @@ static int __init atmel_console_setup(struct console *co, char *options)
 {
 	int ret;
 	struct uart_port *port = &atmel_ports[co->index].uart;
+	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
 	int baud = 115200;
 	int bits = 8;
 	int parity = 'n';
@@ -2528,6 +2502,7 @@ static int __init atmel_console_setup(struct console *co, char *options)
 	atmel_uart_writel(port, ATMEL_US_IDR, -1);
 	atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_RSTSTA | ATMEL_US_RSTRX);
 	atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_TXEN | ATMEL_US_RXEN);
+	atmel_port->tx_stopped = false;
 
 	if (options)
 		uart_parse_options(options, &baud, &parity, &bits, &flow);

drivers/tty/serial/atmel_serial.h

@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * include/linux/atmel_serial.h
  *
@@ -6,11 +7,6 @@
  *
  * USART registers.
  * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 
 #ifndef ATMEL_SERIAL_H

drivers/tty/serial/bcm63xx_uart.c

@@ -1,8 +1,5 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
  * Derived from many drivers using generic_serial interface.
  *
  * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>

drivers/tty/serial/bfin_sport_uart.c

@@ -1,11 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Blackfin On-Chip Sport Emulated UART Driver
  *
  * Copyright 2006-2009 Analog Devices Inc.
  *
  * Enter bugs at http://blackfin.uclinux.org/
- *
- * Licensed under the GPL-2 or later.
  */
 
 /*
@@ -584,7 +583,7 @@ static void sport_set_termios(struct uart_port *port,
 	spin_unlock_irqrestore(&up->port.lock, flags);
 }
 
-struct uart_ops sport_uart_ops = {
+static const struct uart_ops sport_uart_ops = {
 	.tx_empty	= sport_tx_empty,
 	.set_mctrl	= sport_set_mctrl,
 	.get_mctrl	= sport_get_mctrl,

drivers/tty/serial/bfin_sport_uart.h

@@ -1,11 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Blackfin On-Chip Sport Emulated UART Driver
  *
  * Copyright 2006-2008 Analog Devices Inc.
  *
  * Enter bugs at http://blackfin.uclinux.org/
- *
- * Licensed under the GPL-2 or later.
  */
 
 /*

drivers/tty/serial/bfin_uart.c

@@ -1,11 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Blackfin On-Chip Serial Driver
  *
  * Copyright 2006-2011 Analog Devices Inc.
  *
  * Enter bugs at http://blackfin.uclinux.org/
- *
- * Licensed under the GPL-2 or later.
  */
 
 #if defined(CONFIG_SERIAL_BFIN_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
@@ -456,8 +455,9 @@ static void bfin_serial_dma_rx_chars(struct bfin_serial_port *uart)
 	tty_flip_buffer_push(&uart->port.state->port);
 }
 
-void bfin_serial_rx_dma_timeout(struct bfin_serial_port *uart)
+void bfin_serial_rx_dma_timeout(struct timer_list *t)
 {
+	struct bfin_serial_port *uart = from_timer(uart, t, rx_dma_timer);
 	int x_pos, pos;
 	unsigned long flags;
 
@@ -624,8 +624,6 @@ static int bfin_serial_startup(struct uart_port *port)
 	set_dma_start_addr(uart->rx_dma_channel, (unsigned long)uart->rx_dma_buf.buf);
 	enable_dma(uart->rx_dma_channel);
 
-	uart->rx_dma_timer.data = (unsigned long)(uart);
-	uart->rx_dma_timer.function = (void *)bfin_serial_rx_dma_timeout;
 	uart->rx_dma_timer.expires = jiffies + DMA_RX_FLUSH_JIFFIES;
 	add_timer(&(uart->rx_dma_timer));
 #else
@@ -1316,7 +1314,7 @@ static int bfin_serial_probe(struct platform_device *pdev)
 		}
 		uart->rx_dma_channel = res->start;
 
-		init_timer(&(uart->rx_dma_timer));
+		timer_setup(&uart->rx_dma_timer, bfin_serial_rx_dma_timeout, 0);
 #endif
 
 #if defined(SERIAL_BFIN_CTSRTS) || \

drivers/tty/serial/clps711x.c

@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  *  Driver for CLPS711x serial ports
  *
@@ -5,11 +6,6 @@
  *
  *  Copyright 1999 ARM Limited
  *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 
 #if defined(CONFIG_SERIAL_CLPS711X_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)

drivers/tty/serial/cpm_uart/cpm_uart.h

@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  *  Driver for CPM (SCC/SMC) serial ports
  *
@@ -5,11 +6,6 @@
  *
  *  2006 (c) MontaVista Software, Inc.
  *	Vitaly Bordug <vbordug@ru.mvista.com>
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- *
  */
 #ifndef CPM_UART_H
 #define CPM_UART_H

drivers/tty/serial/cpm_uart/cpm_uart_core.c

@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  *  Driver for CPM (SCC/SMC) serial ports; core driver
  *
@@ -12,21 +13,6 @@
  *            (C) 2004 Intracom, S.A.
  *            (C) 2005-2006 MontaVista Software, Inc.
  *		Vitaly Bordug <vbordug@ru.mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
  */
 
 #include <linux/module.h>

drivers/tty/serial/cpm_uart/cpm_uart_cpm1.c

@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  *  Driver for CPM (SCC/SMC) serial ports; CPM1 definitions
  *
@@ -8,21 +9,6 @@
  *            (C) 2004 Intracom, S.A.
  *            (C) 2006 MontaVista Software, Inc.
  *		Vitaly Bordug <vbordug@ru.mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
  */
 
 #include <linux/module.h>

drivers/tty/serial/cpm_uart/cpm_uart_cpm2.c

@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  *  Driver for CPM (SCC/SMC) serial ports; CPM2 definitions
  *
@@ -8,21 +9,6 @@
  *            (C) 2004 Intracom, S.A.
  *            (C) 2006 MontaVista Software, Inc.
  *		Vitaly Bordug <vbordug@ru.mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
  */
 
 #include <linux/module.h>

drivers/tty/serial/digicolor-usart.c

@@ -1,14 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  *  Driver for Conexant Digicolor serial ports (USART)
  *
  * Author: Baruch Siach <baruch@tkos.co.il>
  *
  * Copyright (C) 2014 Paradox Innovation Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 
 #include <linux/module.h>

drivers/tty/serial/dz.c

@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * dz.c: Serial port driver for DECstations equipped
  *       with the DZ chipset.