staging: rtl8192u: remove bool comparisons

Remove explicit true/false comparisons to bool variables.

Signed-off-by: Luis de Bethencourt <luis@debethencourt.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c

@@ -1014,7 +1014,7 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
 		goto rx_dropped;
 
 	// if QoS enabled, should check the sequence for each of the AC
-	if( (ieee->pHTInfo->bCurRxReorderEnable == false) || !ieee->current_network.qos_data.active|| !IsDataFrame(skb->data) || IsLegacyDataFrame(skb->data)){
+	if ((!ieee->pHTInfo->bCurRxReorderEnable) || !ieee->current_network.qos_data.active|| !IsDataFrame(skb->data) || IsLegacyDataFrame(skb->data)) {
 		if (is_duplicate_packet(ieee, hdr))
 		goto rx_dropped;
 
@@ -1307,7 +1307,7 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
 	}
 
 //added by amy for reorder
-	if(ieee->pHTInfo->bCurRxReorderEnable == false ||pTS == NULL){
+	if (!ieee->pHTInfo->bCurRxReorderEnable || pTS == NULL){
 //added by amy for reorder
 		for(i = 0; i<rxb->nr_subframes; i++) {
 			struct sk_buff *sub_skb = rxb->subframes[i];

drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c

@@ -1964,7 +1964,7 @@ static void ieee80211_check_auth_response(struct ieee80211_device *ieee,
 			}
 
 			if (ieee->current_network.mode == IEEE_N_24G &&
-					bHalfSupportNmode == true) {
+					bHalfSupportNmode) {
 				netdev_dbg(ieee->dev, "enter half N mode\n");
 				ieee->bHalfWirelessN24GMode = true;
 			} else

drivers/staging/rtl8192u/ieee80211/ieee80211_tx.c

@@ -336,12 +336,12 @@ static void ieee80211_tx_query_agg_cap(struct ieee80211_device *ieee,
 			printk("===>can't get TS\n");
 			return;
 		}
-		if (pTxTs->TxAdmittedBARecord.bValid == false)
+		if (!pTxTs->TxAdmittedBARecord.bValid)
 		{
 			TsStartAddBaProcess(ieee, pTxTs);
 			goto FORCED_AGG_SETTING;
 		}
-		else if (pTxTs->bUsingBa == false)
+		else if (!pTxTs->bUsingBa)
 		{
 			if (SN_LESS(pTxTs->TxAdmittedBARecord.BaStartSeqCtrl.field.SeqNum, (pTxTs->TxCurSeq+1)%4096))
 				pTxTs->bUsingBa = true;

drivers/staging/rtl8192u/ieee80211/rtl819x_BAProc.c

@@ -364,8 +364,8 @@ int ieee80211_rx_ADDBAReq(struct ieee80211_device *ieee, struct sk_buff *skb)
 	printk("====================>rx ADDBAREQ from :%pM\n", dst);
 //some other capability is not ready now.
 	if ((ieee->current_network.qos_data.active == 0) ||
-		(ieee->pHTInfo->bCurrentHTSupport == false)) //||
-	//	(ieee->pStaQos->bEnableRxImmBA == false)	)
+		(!ieee->pHTInfo->bCurrentHTSupport)) //||
+	//	(!ieee->pStaQos->bEnableRxImmBA)	)
 	{
 		rc = ADDBA_STATUS_REFUSED;
 		IEEE80211_DEBUG(IEEE80211_DL_ERR, "Failed to reply on ADDBA_REQ as some capability is not ready(%d, %d)\n", ieee->current_network.qos_data.active, ieee->pHTInfo->bCurrentHTSupport);
@@ -462,8 +462,8 @@ int ieee80211_rx_ADDBARsp(struct ieee80211_device *ieee, struct sk_buff *skb)
 	// Check the capability
 	// Since we can always receive A-MPDU, we just check if it is under HT mode.
 	if (ieee->current_network.qos_data.active == 0  ||
-	    ieee->pHTInfo->bCurrentHTSupport == false ||
-	    ieee->pHTInfo->bCurrentAMPDUEnable == false) {
+	    !ieee->pHTInfo->bCurrentHTSupport ||
+	    !ieee->pHTInfo->bCurrentAMPDUEnable) {
 		IEEE80211_DEBUG(IEEE80211_DL_ERR, "reject to ADDBA_RSP as some capability is not ready(%d, %d, %d)\n",ieee->current_network.qos_data.active, ieee->pHTInfo->bCurrentHTSupport, ieee->pHTInfo->bCurrentAMPDUEnable);
 		ReasonCode = DELBA_REASON_UNKNOWN_BA;
 		goto OnADDBARsp_Reject;
@@ -502,7 +502,7 @@ int ieee80211_rx_ADDBARsp(struct ieee80211_device *ieee, struct sk_buff *skb)
 		IEEE80211_DEBUG(IEEE80211_DL_BA, "OnADDBARsp(): Recv ADDBA Rsp. Drop because already admit it! \n");
 		return -1;
 	}
-	else if((pPendingBA->bValid == false) ||(*pDialogToken != pPendingBA->DialogToken))
+	else if((!pPendingBA->bValid) ||(*pDialogToken != pPendingBA->DialogToken))
 	{
 		IEEE80211_DEBUG(IEEE80211_DL_ERR,  "OnADDBARsp(): Recv ADDBA Rsp. BA invalid, DELBA! \n");
 		ReasonCode = DELBA_REASON_UNKNOWN_BA;
@@ -582,7 +582,7 @@ int ieee80211_rx_DELBA(struct ieee80211_device *ieee, struct sk_buff *skb)
 	}
 
 	if (ieee->current_network.qos_data.active == 0 ||
-		ieee->pHTInfo->bCurrentHTSupport == false )
+	    !ieee->pHTInfo->bCurrentHTSupport)
 	{
 		IEEE80211_DEBUG(IEEE80211_DL_ERR, "received DELBA while QOS or HT is not supported(%d, %d)\n",ieee->current_network.qos_data.active, ieee->pHTInfo->bCurrentHTSupport);
 		return -1;

drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c

@@ -224,9 +224,9 @@ static bool IsHTHalfNmode40Bandwidth(struct ieee80211_device *ieee)
 	bool			retValue = false;
 	PRT_HIGH_THROUGHPUT	 pHTInfo = ieee->pHTInfo;
 
-	if(pHTInfo->bCurrentHTSupport == false )	// wireless is n mode
+	if(!pHTInfo->bCurrentHTSupport)		// wireless is n mode
 		retValue = false;
-	else if(pHTInfo->bRegBW40MHz == false)	// station supports 40 bw
+	else if(!pHTInfo->bRegBW40MHz)		// station supports 40 bw
 		retValue = false;
 	else if(!ieee->GetHalfNmodeSupportByAPsHandler(ieee->dev))	// station in half n mode
 		retValue = false;
@@ -243,7 +243,7 @@ static bool IsHTHalfNmodeSGI(struct ieee80211_device *ieee, bool is40MHz)
 	bool			retValue = false;
 	PRT_HIGH_THROUGHPUT	 pHTInfo = ieee->pHTInfo;
 
-	if(pHTInfo->bCurrentHTSupport == false )	// wireless is n mode
+	if(!pHTInfo->bCurrentHTSupport)		// wireless is n mode
 		retValue = false;
 	else if(!ieee->GetHalfNmodeSupportByAPsHandler(ieee->dev))	// station in half n mode
 		retValue = false;
@@ -675,7 +675,7 @@ void HTConstructInfoElement(struct ieee80211_device *ieee, u8 *posHTInfo, u8 *le
 	if ( (ieee->iw_mode == IW_MODE_ADHOC) || (ieee->iw_mode == IW_MODE_MASTER)) //ap mode is not currently supported
 	{
 		pHTInfoEle->ControlChl			= ieee->current_network.channel;
-		pHTInfoEle->ExtChlOffset			= ((pHT->bRegBW40MHz == false)?HT_EXTCHNL_OFFSET_NO_EXT:
+		pHTInfoEle->ExtChlOffset			= ((!pHT->bRegBW40MHz)?HT_EXTCHNL_OFFSET_NO_EXT:
 											(ieee->current_network.channel<=6)?
 												HT_EXTCHNL_OFFSET_UPPER:HT_EXTCHNL_OFFSET_LOWER);
 		pHTInfoEle->RecommemdedTxWidth	= pHT->bRegBW40MHz;
@@ -945,7 +945,7 @@ void HTOnAssocRsp(struct ieee80211_device *ieee)
 	static u8				EWC11NHTCap[] = {0x00, 0x90, 0x4c, 0x33};		// For 11n EWC definition, 2007.07.17, by Emily
 	static u8				EWC11NHTInfo[] = {0x00, 0x90, 0x4c, 0x34};	// For 11n EWC definition, 2007.07.17, by Emily
 
-	if (pHTInfo->bCurrentHTSupport == false) {
+	if (!pHTInfo->bCurrentHTSupport) {
 		IEEE80211_DEBUG(IEEE80211_DL_ERR, "<=== HTOnAssocRsp(): HT_DISABLE\n");
 		return;
 	}
@@ -976,7 +976,7 @@ void HTOnAssocRsp(struct ieee80211_device *ieee)
 	//
 	HTSetConnectBwMode(ieee, (HT_CHANNEL_WIDTH)(pPeerHTCap->ChlWidth), (HT_EXTCHNL_OFFSET)(pPeerHTInfo->ExtChlOffset));
 
-//	if(pHTInfo->bCurBW40MHz == true)
+//	if (pHTInfo->bCurBW40MHz)
 		pHTInfo->bCurTxBW40MHz = ((pPeerHTInfo->RecommemdedTxWidth == 1)?true:false);
 
 	//
@@ -1341,7 +1341,7 @@ void HTSetConnectBwMode(struct ieee80211_device *ieee, HT_CHANNEL_WIDTH	Bandwidt
 	PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo;
 //	u32 flags = 0;
 
-	if(pHTInfo->bRegBW40MHz == false)
+	if(!pHTInfo->bRegBW40MHz)
 		return;
 
 

drivers/staging/rtl8192u/ieee80211/rtl819x_TSProc.c

@@ -584,7 +584,7 @@ void RemoveAllTS(struct ieee80211_device *ieee)
 
 void TsStartAddBaProcess(struct ieee80211_device *ieee, PTX_TS_RECORD	pTxTS)
 {
-	if(pTxTS->bAddBaReqInProgress == false)
+	if(!pTxTS->bAddBaReqInProgress)
 	{
 		pTxTS->bAddBaReqInProgress = true;
 		if(pTxTS->bAddBaReqDelayed)

drivers/staging/rtl8192u/r8192U_core.c

@@ -2047,7 +2047,7 @@ static bool GetHalfNmodeSupportByAPs819xUsb(struct net_device *dev)
 	struct r8192_priv *priv = ieee80211_priv(dev);
 	struct ieee80211_device *ieee = priv->ieee80211;
 
-	if (ieee->bHalfWirelessN24GMode == true)
+	if (ieee->bHalfWirelessN24GMode)
 		Reval = true;
 	else
 		Reval =  false;
@@ -2762,7 +2762,7 @@ static bool rtl8192_adapter_start(struct net_device *dev)
 	//
 #ifdef TO_DO_LIST
 	if (Adapter->ResetProgress == RESET_TYPE_NORESET) {
-		if (pMgntInfo->RegRfOff == true) { /* User disable RF via registry. */
+		if (pMgntInfo->RegRfOff) { /* User disable RF via registry. */
 			RT_TRACE((COMP_INIT|COMP_RF), DBG_LOUD, ("InitializeAdapter819xUsb(): Turn off RF for RegRfOff ----------\n"));
 			MgntActSet_RF_State(Adapter, eRfOff, RF_CHANGE_BY_SW);
 			// Those actions will be discard in MgntActSet_RF_State because of the same state
@@ -4406,7 +4406,8 @@ static void query_rxdesc_status(struct sk_buff *skb,
 	/* RTL8190 set this bit to indicate that Hw does not decrypt packet */
 	stats->Decrypted = !desc->SWDec;
 
-	if ((priv->ieee80211->pHTInfo->bCurrentHTSupport == true) && (priv->ieee80211->pairwise_key_type == KEY_TYPE_CCMP))
+	if ((priv->ieee80211->pHTInfo->bCurrentHTSupport) &&
+	    (priv->ieee80211->pairwise_key_type == KEY_TYPE_CCMP))
 		stats->bHwError = false;
 	else
 		stats->bHwError = stats->bCRC|stats->bICV;

drivers/staging/rtl8192u/r8192U_dm.c

@@ -438,7 +438,7 @@ static void dm_bandwidth_autoswitch(struct net_device *dev)
 
 	if (priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20 || !priv->ieee80211->bandwidth_auto_switch.bautoswitch_enable)
 		return;
-	if (priv->ieee80211->bandwidth_auto_switch.bforced_tx20Mhz == false) { /* If send packets in 40 Mhz in 20/40 */
+	if (!priv->ieee80211->bandwidth_auto_switch.bforced_tx20Mhz) { /* If send packets in 40 Mhz in 20/40 */
 		if (priv->undecorated_smoothed_pwdb <= priv->ieee80211->bandwidth_auto_switch.threshold_40Mhzto20Mhz)
 			priv->ieee80211->bandwidth_auto_switch.bforced_tx20Mhz = true;
 	} else { /* in force send packets in 20 Mhz in 20/40 */
@@ -1731,7 +1731,7 @@ static void dm_dig_init(struct net_device *dev)
  *---------------------------------------------------------------------------*/
 static void dm_ctrl_initgain_byrssi(struct net_device *dev)
 {
-	if (dm_digtable.dig_enable_flag == false)
+	if (!dm_digtable.dig_enable_flag)
 		return;
 
 	if (dm_digtable.dig_algorithm == DIG_ALGO_BY_FALSE_ALARM)
@@ -1750,7 +1750,7 @@ static void dm_ctrl_initgain_byrssi_by_driverrssi(
 	u8 i;
 	static u8	fw_dig;
 
-	if (dm_digtable.dig_enable_flag == false)
+	if (!dm_digtable.dig_enable_flag)
 		return;
 
 	/*DbgPrint("Dig by Sw Rssi\n");*/
@@ -1792,7 +1792,7 @@ static void dm_ctrl_initgain_byrssi_by_fwfalse_alarm(
 	static u32 reset_cnt;
 	u8 i;
 
-	if (dm_digtable.dig_enable_flag == false)
+	if (!dm_digtable.dig_enable_flag)
 		return;
 
 	if (dm_digtable.dig_algorithm_switch) {