be2net: refactor multi-channel config code for Skyhawk-R chip

Currently multi-channel configuration is read via the QUERY_FW_CONFIG cmd.
This method has been deprecated by the Skyhawk-R FW. Instead,
GET_PROFILE_CONFIG::port-desc must be used to query this configuration.

This patch also:
a) introduces a few macros to identify certain categories of multi-channel
configs
2) re-factors the be_cmd_set_profile_config() code to be able to read any kind
of desc (and not just the nic-desc.)

Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/emulex/benet/be.h

@@ -88,7 +88,6 @@ static inline char *nic_name(struct pci_dev *pdev)
 #define BE_MIN_MTU		256
 
 #define BE_NUM_VLANS_SUPPORTED	64
-#define BE_UMC_NUM_VLANS_SUPPORTED	15
 #define BE_MAX_EQD		128u
 #define	BE_MAX_TX_FRAG_COUNT	30
 
@@ -293,7 +292,7 @@ struct be_rx_compl_info {
 	u8 ip_csum;
 	u8 l4_csum;
 	u8 ipv6;
-	u8 vtm;
+	u8 qnq;
 	u8 pkt_type;
 	u8 ip_frag;
 };
@@ -465,6 +464,7 @@ struct be_adapter {
 
 	u32 port_num;
 	bool promiscuous;
+	u8 mc_type;
 	u32 function_mode;
 	u32 function_caps;
 	u32 rx_fc;		/* Rx flow control */
@@ -534,6 +534,14 @@ static inline u16 be_max_qs(struct be_adapter *adapter)
 	return min_t(u16, num, num_online_cpus());
 }
 
+/* Is BE in pvid_tagging mode */
+#define be_pvid_tagging_enabled(adapter)	(adapter->pvid)
+
+/* Is BE in QNQ multi-channel mode */
+#define be_is_qnq_mode(adapter)		(adapter->mc_type == FLEX10 ||  \
+					 adapter->mc_type == vNIC1 ||	\
+					 adapter->mc_type == UFP)
+
 #define lancer_chip(adapter)	(adapter->pdev->device == OC_DEVICE_ID3 || \
 				 adapter->pdev->device == OC_DEVICE_ID4)
 

drivers/net/ethernet/emulex/benet/be_cmds.c

@@ -3296,6 +3296,21 @@ static struct be_pcie_res_desc *be_get_pcie_desc(u8 devfn, u8 *buf,
 	return NULL;
 }
 
+static struct be_port_res_desc *be_get_port_desc(u8 *buf, u32 desc_count)
+{
+	struct be_res_desc_hdr *hdr = (struct be_res_desc_hdr *)buf;
+	int i;
+
+	for (i = 0; i < desc_count; i++) {
+		if (hdr->desc_type == PORT_RESOURCE_DESC_TYPE_V1)
+			return (struct be_port_res_desc *)hdr;
+
+		hdr->desc_len = hdr->desc_len ? : RESOURCE_DESC_SIZE_V0;
+		hdr = (void *)hdr + hdr->desc_len;
+	}
+	return NULL;
+}
+
 static void be_copy_nic_desc(struct be_resources *res,
 			     struct be_nic_res_desc *desc)
 {
@@ -3439,6 +3454,7 @@ int be_cmd_get_profile_config(struct be_adapter *adapter,
 {
 	struct be_cmd_resp_get_profile_config *resp;
 	struct be_pcie_res_desc *pcie;
+	struct be_port_res_desc *port;
 	struct be_nic_res_desc *nic;
 	struct be_queue_info *mccq = &adapter->mcc_obj.q;
 	struct be_dma_mem cmd;
@@ -3466,6 +3482,10 @@ int be_cmd_get_profile_config(struct be_adapter *adapter,
 	if (pcie)
 		res->max_vfs = le16_to_cpu(pcie->num_vfs);
 
+	port = be_get_port_desc(resp->func_param, desc_count);
+	if (port)
+		adapter->mc_type = port->mc_type;
+
 	nic = be_get_nic_desc(resp->func_param, desc_count);
 	if (nic)
 		be_copy_nic_desc(res, nic);

drivers/net/ethernet/emulex/benet/be_cmds.h

@@ -1098,14 +1098,6 @@ struct be_cmd_resp_query_fw_cfg {
 	u32 function_caps;
 };
 
-/* Is BE in a multi-channel mode */
-static inline bool be_is_mc(struct be_adapter *adapter)
-{
-	return adapter->function_mode & FLEX10_MODE ||
-		adapter->function_mode & VNIC_MODE ||
-		adapter->function_mode & UMC_ENABLED;
-}
-
 /******************** RSS Config ****************************************/
 /* RSS type		Input parameters used to compute RX hash
  * RSS_ENABLE_IPV4	SRC IPv4, DST IPv4
@@ -1828,6 +1820,7 @@ struct be_cmd_req_set_ext_fat_caps {
 #define NIC_RESOURCE_DESC_TYPE_V0		0x41
 #define PCIE_RESOURCE_DESC_TYPE_V1		0x50
 #define NIC_RESOURCE_DESC_TYPE_V1		0x51
+#define PORT_RESOURCE_DESC_TYPE_V1		0x55
 #define MAX_RESOURCE_DESC			264
 
 /* QOS unit number */
@@ -1891,6 +1884,33 @@ struct be_nic_res_desc {
 	u32 rsvd8[7];
 } __packed;
 
+/************ Multi-Channel type ***********/
+enum mc_type {
+	MC_NONE = 0x01,
+	UMC = 0x02,
+	FLEX10 = 0x03,
+	vNIC1 = 0x04,
+	nPAR = 0x05,
+	UFP = 0x06,
+	vNIC2 = 0x07
+};
+
+struct be_port_res_desc {
+	struct be_res_desc_hdr hdr;
+	u8 rsvd0;
+	u8 flags;
+	u8 rsvd1;
+	u8 mc_type;
+	u16 rsvd2;
+	u32 rsvd3[20];
+} __packed;
+
+/* Is BE in a multi-channel mode */
+static inline bool be_is_mc(struct be_adapter *adapter)
+{
+	return adapter->mc_type > MC_NONE;
+}
+
 struct be_cmd_req_get_func_config {
 	struct be_cmd_req_hdr hdr;
 };

drivers/net/ethernet/emulex/benet/be_hw.h

@@ -368,7 +368,7 @@ struct amap_eth_rx_compl_v0 {
 	u8 numfrags[3];		/* dword 1 */
 	u8 rss_flush;		/* dword 2 */
 	u8 cast_enc[2];		/* dword 2 */
-	u8 vtm;			/* dword 2 */
+	u8 qnq;			/* dword 2 */
 	u8 rss_bank;		/* dword 2 */
 	u8 rsvd1[23];		/* dword 2 */
 	u8 lro_pkt;		/* dword 2 */
@@ -401,7 +401,7 @@ struct amap_eth_rx_compl_v1 {
 	u8 numfrags[3];		/* dword 1 */
 	u8 rss_flush;		/* dword 2 */
 	u8 cast_enc[2];		/* dword 2 */
-	u8 vtm;			/* dword 2 */
+	u8 qnq;			/* dword 2 */
 	u8 rss_bank;		/* dword 2 */
 	u8 port[2];		/* dword 2 */
 	u8 vntagp;		/* dword 2 */

drivers/net/ethernet/emulex/benet/be_main.c

@@ -945,9 +945,9 @@ static struct sk_buff *be_xmit_workarounds(struct be_adapter *adapter,
 	}
 
 	/* If vlan tag is already inlined in the packet, skip HW VLAN
-	 * tagging in UMC mode
+	 * tagging in pvid-tagging mode
 	 */
-	if ((adapter->function_mode & UMC_ENABLED) &&
+	if (be_pvid_tagging_enabled(adapter) &&
 	    veh->h_vlan_proto == htons(ETH_P_8021Q))
 			*skip_hw_vlan = true;
 
@@ -1660,7 +1660,7 @@ static void be_parse_rx_compl_v1(struct be_eth_rx_compl *compl,
 	rxcp->rss_hash =
 		AMAP_GET_BITS(struct amap_eth_rx_compl_v1, rsshash, compl);
 	if (rxcp->vlanf) {
-		rxcp->vtm = AMAP_GET_BITS(struct amap_eth_rx_compl_v1, vtm,
+		rxcp->qnq = AMAP_GET_BITS(struct amap_eth_rx_compl_v1, qnq,
 					  compl);
 		rxcp->vlan_tag = AMAP_GET_BITS(struct amap_eth_rx_compl_v1, vlan_tag,
 					       compl);
@@ -1690,7 +1690,7 @@ static void be_parse_rx_compl_v0(struct be_eth_rx_compl *compl,
 	rxcp->rss_hash =
 		AMAP_GET_BITS(struct amap_eth_rx_compl_v0, rsshash, compl);
 	if (rxcp->vlanf) {
-		rxcp->vtm = AMAP_GET_BITS(struct amap_eth_rx_compl_v0, vtm,
+		rxcp->qnq = AMAP_GET_BITS(struct amap_eth_rx_compl_v0, qnq,
 					  compl);
 		rxcp->vlan_tag = AMAP_GET_BITS(struct amap_eth_rx_compl_v0, vlan_tag,
 					       compl);
@@ -1723,9 +1723,11 @@ static struct be_rx_compl_info *be_rx_compl_get(struct be_rx_obj *rxo)
 		rxcp->l4_csum = 0;
 
 	if (rxcp->vlanf) {
-		/* vlanf could be wrongly set in some cards.
-		 * ignore if vtm is not set */
-		if ((adapter->function_mode & FLEX10_MODE) && !rxcp->vtm)
+		/* In QNQ modes, if qnq bit is not set, then the packet was
+		 * tagged only with the transparent outer vlan-tag and must
+		 * not be treated as a vlan packet by host
+		 */
+		if (be_is_qnq_mode(adapter) && !rxcp->qnq)
 			rxcp->vlanf = 0;
 
 		if (!lancer_chip(adapter))
@@ -3109,6 +3111,22 @@ err:
 	return status;
 }
 
+/* Converting function_mode bits on BE3 to SH mc_type enums */
+
+static u8 be_convert_mc_type(u32 function_mode)
+{
+	if (function_mode & VNIC_MODE && function_mode & FLEX10_MODE)
+		return vNIC1;
+	else if (function_mode & FLEX10_MODE)
+		return FLEX10;
+	else if (function_mode & VNIC_MODE)
+		return vNIC2;
+	else if (function_mode & UMC_ENABLED)
+		return UMC;
+	else
+		return MC_NONE;
+}
+
 /* On BE2/BE3 FW does not suggest the supported limits */
 static void BEx_get_resources(struct be_adapter *adapter,
 			      struct be_resources *res)
@@ -3129,12 +3147,23 @@ static void BEx_get_resources(struct be_adapter *adapter,
 	else
 		res->max_uc_mac = BE_VF_UC_PMAC_COUNT;
 
-	if (adapter->function_mode & FLEX10_MODE)
-		res->max_vlans = BE_NUM_VLANS_SUPPORTED/8;
-	else if (adapter->function_mode & UMC_ENABLED)
-		res->max_vlans = BE_UMC_NUM_VLANS_SUPPORTED;
-	else
+	adapter->mc_type = be_convert_mc_type(adapter->function_mode);
+
+	if (be_is_mc(adapter)) {
+		/* Assuming that there are 4 channels per port,
+		 * when multi-channel is enabled
+		 */
+		if (be_is_qnq_mode(adapter))
+			res->max_vlans = BE_NUM_VLANS_SUPPORTED/8;
+		else
+			/* In a non-qnq multichannel mode, the pvid
+			 * takes up one vlan entry
+			 */
+			res->max_vlans = (BE_NUM_VLANS_SUPPORTED / 4) - 1;
+	} else {
 		res->max_vlans = BE_NUM_VLANS_SUPPORTED;
+	}
+
 	res->max_mcast_mac = BE_MAX_MC;
 
 	/* For BE3 1Gb ports, F/W does not properly support multiple TXQs */
@@ -4417,14 +4446,32 @@ static bool be_reset_required(struct be_adapter *adapter)
 
 static char *mc_name(struct be_adapter *adapter)
 {
-	if (adapter->function_mode & FLEX10_MODE)
-		return "FLEX10";
-	else if (adapter->function_mode & VNIC_MODE)
-		return "vNIC";
-	else if (adapter->function_mode & UMC_ENABLED)
-		return "UMC";
-	else
-		return "";
+	char *str = "";	/* default */
+
+	switch (adapter->mc_type) {
+	case UMC:
+		str = "UMC";
+		break;
+	case FLEX10:
+		str = "FLEX10";
+		break;
+	case vNIC1:
+		str = "vNIC-1";
+		break;
+	case nPAR:
+		str = "nPAR";
+		break;
+	case UFP:
+		str = "UFP";
+		break;
+	case vNIC2:
+		str = "vNIC-2";
+		break;
+	default:
+		str = "";
+	}
+
+	return str;
 }
 
 static inline char *func_name(struct be_adapter *adapter)