Merge remote-tracking branch 'origin/master' into next

MAINTAINERS

@@ -269,7 +269,6 @@ S:	Orphan
 F:	drivers/platform/x86/wmi.c
 
 AD1889 ALSA SOUND DRIVER
-M:	Kyle McMartin <kyle@mcmartin.ca>
 M:	Thibaut Varene <T-Bone@parisc-linux.org>
 W:	http://wiki.parisc-linux.org/AD1889
 L:	linux-parisc@vger.kernel.org
@@ -3047,7 +3046,6 @@ F:	drivers/hwspinlock/hwspinlock_*
 F:	include/linux/hwspinlock.h
 
 HARMONY SOUND DRIVER
-M:	Kyle McMartin <kyle@mcmartin.ca>
 L:	linux-parisc@vger.kernel.org
 S:	Maintained
 F:	sound/parisc/harmony.*
@@ -5000,9 +4998,8 @@ F:	Documentation/blockdev/paride.txt
 F:	drivers/block/paride/
 
 PARISC ARCHITECTURE
-M:	Kyle McMartin <kyle@mcmartin.ca>
-M:	Helge Deller <deller@gmx.de>
 M:	"James E.J. Bottomley" <jejb@parisc-linux.org>
+M:	Helge Deller <deller@gmx.de>
 L:	linux-parisc@vger.kernel.org
 W:	http://www.parisc-linux.org/
 Q:	http://patchwork.kernel.org/project/linux-parisc/list/
@@ -5861,7 +5858,7 @@ S:	Maintained
 F:	drivers/mmc/host/sdhci-spear.c
 
 SECURITY SUBSYSTEM
-M:	James Morris <jmorris@namei.org>
+M:	James Morris <james.l.morris@oracle.com>
 L:	linux-security-module@vger.kernel.org (suggested Cc:)
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security.git
 W:	http://security.wiki.kernel.org/
@@ -5874,7 +5871,7 @@ S:	Supported
 
 SELINUX SECURITY MODULE
 M:	Stephen Smalley <sds@tycho.nsa.gov>
-M:	James Morris <jmorris@namei.org>
+M:	James Morris <james.l.morris@oracle.com>
 M:	Eric Paris <eparis@parisplace.org>
 L:	selinux@tycho.nsa.gov (subscribers-only, general discussion)
 W:	http://selinuxproject.org

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 3
 SUBLEVEL = 0
-EXTRAVERSION = -rc4
+EXTRAVERSION = -rc5
 NAME = Saber-toothed Squirrel
 
 # *DOCUMENTATION*

arch/arm/common/it8152.c

@@ -320,13 +320,6 @@ err0:
 	return -EBUSY;
 }
 
-/*
- * If we set up a device for bus mastering, we need to check the latency
- * timer as we don't have even crappy BIOSes to set it properly.
- * The implementation is from arch/i386/pci/i386.c
- */
-unsigned int pcibios_max_latency = 255;
-
 /* ITE bridge requires setting latency timer to avoid early bus access
    termination by PCI bus master devices
 */

arch/arm/common/pl330.c

@@ -1502,12 +1502,13 @@ int pl330_chan_ctrl(void *ch_id, enum pl330_chan_op op)
 	struct pl330_thread *thrd = ch_id;
 	struct pl330_dmac *pl330;
 	unsigned long flags;
-	int ret = 0, active = thrd->req_running;
+	int ret = 0, active;
 
 	if (!thrd || thrd->free || thrd->dmac->state == DYING)
 		return -EINVAL;
 
 	pl330 = thrd->dmac;
+	active = thrd->req_running;
 
 	spin_lock_irqsave(&pl330->lock, flags);
 

arch/arm/include/asm/assembler.h

@@ -137,6 +137,11 @@
 	disable_irq
 	.endm
 
+	.macro	save_and_disable_irqs_notrace, oldcpsr
+	mrs	\oldcpsr, cpsr
+	disable_irq_notrace
+	.endm
+
 /*
  * Restore interrupt state previously stored in a register.  We don't
  * guarantee that this will preserve the flags.

arch/arm/include/asm/hardware/pl330.h

@@ -41,7 +41,7 @@ enum pl330_dstcachectrl {
 	DCCTRL1, /* Bufferable only */
 	DCCTRL2, /* Cacheable, but do not allocate */
 	DCCTRL3, /* Cacheable and bufferable, but do not allocate */
-	DINVALID1 = 8,
+	DINVALID1,              /* AWCACHE = 0x1000 */
 	DINVALID2,
 	DCCTRL6, /* Cacheable write-through, allocate on writes only */
 	DCCTRL7, /* Cacheable write-back, allocate on writes only */

arch/arm/include/asm/processor.h

@@ -22,6 +22,7 @@
 #include <asm/hw_breakpoint.h>
 #include <asm/ptrace.h>
 #include <asm/types.h>
+#include <asm/system.h>
 
 #ifdef __KERNEL__
 #define STACK_TOP	((current->personality & ADDR_LIMIT_32BIT) ? \

arch/arm/kernel/ptrace.c

@@ -23,6 +23,7 @@
 #include <linux/perf_event.h>
 #include <linux/hw_breakpoint.h>
 #include <linux/regset.h>
+#include <linux/audit.h>
 
 #include <asm/pgtable.h>
 #include <asm/system.h>
@@ -904,6 +905,12 @@ long arch_ptrace(struct task_struct *child, long request,
 	return ret;
 }
 
+#ifdef __ARMEB__
+#define AUDIT_ARCH_NR AUDIT_ARCH_ARMEB
+#else
+#define AUDIT_ARCH_NR AUDIT_ARCH_ARM
+#endif
+
 asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno)
 {
 	unsigned long ip;
@@ -918,7 +925,7 @@ asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno)
 	if (!ip)
 		audit_syscall_exit(regs);
 	else
-		audit_syscall_entry(AUDIT_ARCH_ARMEB, scno, regs->ARM_r0,
+		audit_syscall_entry(AUDIT_ARCH_NR, scno, regs->ARM_r0,
 				    regs->ARM_r1, regs->ARM_r2, regs->ARM_r3);
 
 	if (!test_thread_flag(TIF_SYSCALL_TRACE))

arch/arm/kernel/smp_twd.c

@@ -129,7 +129,7 @@ static struct notifier_block twd_cpufreq_nb = {
 
 static int twd_cpufreq_init(void)
 {
-	if (!IS_ERR(twd_clk))
+	if (twd_evt && *__this_cpu_ptr(twd_evt) && !IS_ERR(twd_clk))
 		return cpufreq_register_notifier(&twd_cpufreq_nb,
 			CPUFREQ_TRANSITION_NOTIFIER);
 

arch/arm/mach-omap2/voltagedomains3xxx_data.c

@@ -108,6 +108,7 @@ void __init omap3xxx_voltagedomains_init(void)
 	 * XXX Will depend on the process, validation, and binning
 	 * for the currently-running IC
 	 */
+#ifdef CONFIG_PM_OPP
 	if (cpu_is_omap3630()) {
 		omap3_voltdm_mpu.volt_data = omap36xx_vddmpu_volt_data;
 		omap3_voltdm_core.volt_data = omap36xx_vddcore_volt_data;
@@ -115,6 +116,7 @@ void __init omap3xxx_voltagedomains_init(void)
 		omap3_voltdm_mpu.volt_data = omap34xx_vddmpu_volt_data;
 		omap3_voltdm_core.volt_data = omap34xx_vddcore_volt_data;
 	}
+#endif
 
 	if (cpu_is_omap3517() || cpu_is_omap3505())
 		voltdms = voltagedomains_am35xx;

arch/arm/mach-omap2/voltagedomains44xx_data.c

@@ -100,9 +100,11 @@ void __init omap44xx_voltagedomains_init(void)
 	 * XXX Will depend on the process, validation, and binning
 	 * for the currently-running IC
 	 */
+#ifdef CONFIG_PM_OPP
 	omap4_voltdm_mpu.volt_data = omap44xx_vdd_mpu_volt_data;
 	omap4_voltdm_iva.volt_data = omap44xx_vdd_iva_volt_data;
 	omap4_voltdm_core.volt_data = omap44xx_vdd_core_volt_data;
+#endif
 
 	for (i = 0; voltdm = voltagedomains_omap4[i], voltdm; i++)
 		voltdm->sys_clk.name = sys_clk_name;

arch/arm/mach-shmobile/board-ag5evm.c

@@ -30,6 +30,7 @@
 #include <linux/serial_sci.h>
 #include <linux/smsc911x.h>
 #include <linux/gpio.h>
+#include <linux/videodev2.h>
 #include <linux/input.h>
 #include <linux/input/sh_keysc.h>
 #include <linux/mmc/host.h>
@@ -37,7 +38,6 @@
 #include <linux/mmc/sh_mobile_sdhi.h>
 #include <linux/mfd/tmio.h>
 #include <linux/sh_clk.h>
-#include <linux/dma-mapping.h>
 #include <video/sh_mobile_lcdc.h>
 #include <video/sh_mipi_dsi.h>
 #include <sound/sh_fsi.h>
@@ -159,19 +159,12 @@ static struct resource sh_mmcif_resources[] = {
 	},
 };
 
-static struct sh_mmcif_dma sh_mmcif_dma = {
-	.chan_priv_rx	= {
-		.slave_id	= SHDMA_SLAVE_MMCIF_RX,
-	},
-	.chan_priv_tx	= {
-		.slave_id	= SHDMA_SLAVE_MMCIF_TX,
-	},
-};
 static struct sh_mmcif_plat_data sh_mmcif_platdata = {
 	.sup_pclk	= 0,
 	.ocr		= MMC_VDD_165_195,
 	.caps		= MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE,
-	.dma		= &sh_mmcif_dma,
+	.slave_id_tx	= SHDMA_SLAVE_MMCIF_TX,
+	.slave_id_rx	= SHDMA_SLAVE_MMCIF_RX,
 };
 
 static struct platform_device mmc_device = {
@@ -321,12 +314,11 @@ static struct resource mipidsi0_resources[] = {
 	},
 };
 
-#define DSI0PHYCR	0xe615006c
 static int sh_mipi_set_dot_clock(struct platform_device *pdev,
 				 void __iomem *base,
 				 int enable)
 {
-	struct clk *pck;
+	struct clk *pck, *phy;
 	int ret;
 
 	pck = clk_get(&pdev->dev, "dsip_clk");
@@ -335,18 +327,27 @@ static int sh_mipi_set_dot_clock(struct platform_device *pdev,
 		goto sh_mipi_set_dot_clock_pck_err;
 	}
 
+	phy = clk_get(&pdev->dev, "dsiphy_clk");
+	if (IS_ERR(phy)) {
+		ret = PTR_ERR(phy);
+		goto sh_mipi_set_dot_clock_phy_err;
+	}
+
 	if (enable) {
 		clk_set_rate(pck, clk_round_rate(pck,  24000000));
-		__raw_writel(0x2a809010, DSI0PHYCR);
+		clk_set_rate(phy, clk_round_rate(pck, 510000000));
 		clk_enable(pck);
+		clk_enable(phy);
 	} else {
 		clk_disable(pck);
+		clk_disable(phy);
 	}
 
 	ret = 0;
 
+	clk_put(phy);
+sh_mipi_set_dot_clock_phy_err:
 	clk_put(pck);
-
 sh_mipi_set_dot_clock_pck_err:
 	return ret;
 }

arch/arm/mach-shmobile/board-ap4evb.c

@@ -295,15 +295,6 @@ static struct resource sh_mmcif_resources[] = {
 	},
 };
 
-static struct sh_mmcif_dma sh_mmcif_dma = {
-	.chan_priv_rx	= {
-		.slave_id	= SHDMA_SLAVE_MMCIF_RX,
-	},
-	.chan_priv_tx	= {
-		.slave_id	= SHDMA_SLAVE_MMCIF_TX,
-	},
-};
-
 static struct sh_mmcif_plat_data sh_mmcif_plat = {
 	.sup_pclk	= 0,
 	.ocr		= MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
@@ -311,7 +302,8 @@ static struct sh_mmcif_plat_data sh_mmcif_plat = {
 			  MMC_CAP_8_BIT_DATA |
 			  MMC_CAP_NEEDS_POLL,
 	.get_cd		= slot_cn7_get_cd,
-	.dma		= &sh_mmcif_dma,
+	.slave_id_tx	= SHDMA_SLAVE_MMCIF_TX,
+	.slave_id_rx	= SHDMA_SLAVE_MMCIF_RX,
 };
 
 static struct platform_device sh_mmcif_device = {

arch/arm/mach-shmobile/board-kota2.c

@@ -143,11 +143,10 @@ static struct gpio_keys_button gpio_buttons[] = {
 static struct gpio_keys_platform_data gpio_key_info = {
 	.buttons        = gpio_buttons,
 	.nbuttons       = ARRAY_SIZE(gpio_buttons),
-	.poll_interval  = 250, /* polled for now */
 };
 
 static struct platform_device gpio_keys_device = {
-	.name   = "gpio-keys-polled", /* polled for now */
+	.name   = "gpio-keys",
 	.id     = -1,
 	.dev    = {
 		.platform_data  = &gpio_key_info,

arch/arm/mach-shmobile/board-mackerel.c

@@ -43,7 +43,6 @@
 #include <linux/smsc911x.h>
 #include <linux/sh_intc.h>
 #include <linux/tca6416_keypad.h>
-#include <linux/usb/r8a66597.h>
 #include <linux/usb/renesas_usbhs.h>
 #include <linux/dma-mapping.h>
 
@@ -145,11 +144,6 @@
  * 1-2 short | VBUS 5V       | Host
  * open      | external VBUS | Function
  *
- * *1
- * CN31 is used as
- * CONFIG_USB_R8A66597_HCD	Host
- * CONFIG_USB_RENESAS_USBHS	Function
- *
  * CAUTION
  *
  * renesas_usbhs driver can use external interrupt mode
@@ -161,15 +155,6 @@
  * mackerel can not use external interrupt (IRQ7-PORT167) mode on "USB0",
  * because Touchscreen is using IRQ7-PORT40.
  * It is impossible to use IRQ7 demux on this board.
- *
- * We can use external interrupt mode USB-Function on "USB1".
- * USB1 can become Host by r8a66597, and become Function by renesas_usbhs.
- * But don't select both drivers in same time.
- * These uses same IRQ number for request_irq(), and aren't supporting
- * IRQF_SHARED / IORESOURCE_IRQ_SHAREABLE.
- *
- * Actually these are old/new version of USB driver.
- * This mean its register will be broken if it supports shared IRQ,
  */
 
 /*
@@ -207,6 +192,16 @@
  *
  */
 
+/*
+ * FSI - AK4642
+ *
+ * it needs amixer settings for playing
+ *
+ * amixer set "Headphone" on
+ * amixer set "HPOUTL Mixer DACH" on
+ * amixer set "HPOUTR Mixer DACH" on
+ */
+
 /*
  * FIXME !!
  *
@@ -676,51 +671,16 @@ static struct platform_device usbhs0_device = {
  * Use J30 to select between Host and Function. This setting
  * can however not be detected by software. Hotplug of USBHS1
  * is provided via IRQ8.
+ *
+ * Current USB1 works as "USB Host".
+ *  - set J30 "short"
+ *
+ * If you want to use it as "USB gadget",
+ *  - J30 "open"
+ *  - modify usbhs1_get_id() USBHS_HOST -> USBHS_GADGET
+ *  - add .get_vbus = usbhs_get_vbus in usbhs1_private
  */
 #define IRQ8 evt2irq(0x0300)
-
-/* USBHS1 USB Host support via r8a66597_hcd */
-static void usb1_host_port_power(int port, int power)
-{
-	if (!power) /* only power-on is supported for now */
-		return;
-
-	/* set VBOUT/PWEN and EXTLP1 in DVSTCTR */
-	__raw_writew(__raw_readw(0xE68B0008) | 0x600, 0xE68B0008);
-}
-
-static struct r8a66597_platdata usb1_host_data = {
-	.on_chip	= 1,
-	.port_power	= usb1_host_port_power,
-};
-
-static struct resource usb1_host_resources[] = {
-	[0] = {
-		.name	= "USBHS1",
-		.start	= 0xe68b0000,
-		.end	= 0xe68b00e6 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= evt2irq(0x1ce0) /* USB1_USB1I0 */,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device usb1_host_device = {
-	.name	= "r8a66597_hcd",
-	.id	= 1,
-	.dev = {
-		.dma_mask		= NULL,         /*  not use dma */
-		.coherent_dma_mask	= 0xffffffff,
-		.platform_data		= &usb1_host_data,
-	},
-	.num_resources	= ARRAY_SIZE(usb1_host_resources),
-	.resource	= usb1_host_resources,
-};
-
-/* USBHS1 USB Function support via renesas_usbhs */
-
 #define USB_PHY_MODE		(1 << 4)
 #define USB_PHY_INT_EN		((1 << 3) | (1 << 2))
 #define USB_PHY_ON		(1 << 1)
@@ -776,7 +736,7 @@ static void usbhs1_hardware_exit(struct platform_device *pdev)
 
 static int usbhs1_get_id(struct platform_device *pdev)
 {
-	return USBHS_GADGET;
+	return USBHS_HOST;
 }
 
 static u32 usbhs1_pipe_cfg[] = {
@@ -807,7 +767,6 @@ static struct usbhs_private usbhs1_private = {
 			.hardware_exit	= usbhs1_hardware_exit,
 			.get_id		= usbhs1_get_id,
 			.phy_reset	= usbhs_phy_reset,
-			.get_vbus	= usbhs_get_vbus,
 		},
 		.driver_param = {
 			.buswait_bwait	= 4,
@@ -1184,15 +1143,6 @@ static struct resource sh_mmcif_resources[] = {
 	},
 };
 
-static struct sh_mmcif_dma sh_mmcif_dma = {
-	.chan_priv_rx	= {
-		.slave_id	= SHDMA_SLAVE_MMCIF_RX,
-	},
-	.chan_priv_tx	= {
-		.slave_id	= SHDMA_SLAVE_MMCIF_TX,
-	},
-};
-
 static struct sh_mmcif_plat_data sh_mmcif_plat = {
 	.sup_pclk	= 0,
 	.ocr		= MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
@@ -1200,7 +1150,8 @@ static struct sh_mmcif_plat_data sh_mmcif_plat = {
 			  MMC_CAP_8_BIT_DATA |
 			  MMC_CAP_NEEDS_POLL,
 	.get_cd		= slot_cn7_get_cd,
-	.dma		= &sh_mmcif_dma,
+	.slave_id_tx	= SHDMA_SLAVE_MMCIF_TX,
+	.slave_id_rx	= SHDMA_SLAVE_MMCIF_RX,
 };
 
 static struct platform_device sh_mmcif_device = {
@@ -1311,7 +1262,6 @@ static struct platform_device *mackerel_devices[] __initdata = {
 	&nor_flash_device,
 	&smc911x_device,
 	&lcdc_device,
-	&usb1_host_device,
 	&usbhs1_device,
 	&usbhs0_device,
 	&leds_device,
@@ -1473,9 +1423,6 @@ static void __init mackerel_init(void)
 	gpio_pull_down(GPIO_PORT167CR); /* VBUS0_1 pull down */
 	gpio_request(GPIO_FN_IDIN_1_113, NULL);
 
-	/* USB phy tweak to make the r8a66597_hcd host driver work */
-	__raw_writew(0x8a0a, 0xe6058130);       /* USBCR4 */
-
 	/* enable FSI2 port A (ak4643) */
 	gpio_request(GPIO_FN_FSIAIBT,	NULL);
 	gpio_request(GPIO_FN_FSIAILR,	NULL);

arch/arm/mach-shmobile/clock-sh73a0.c

@@ -365,6 +365,114 @@ static struct clk div6_clks[DIV6_NR] = {
 			dsi_parent, ARRAY_SIZE(dsi_parent), 12, 3),
 };
 
+/* DSI DIV */
+static unsigned long dsiphy_recalc(struct clk *clk)
+{
+	u32 value;
+
+	value = __raw_readl(clk->mapping->base);
+
+	/* FIXME */
+	if (!(value & 0x000B8000))
+		return clk->parent->rate;
+
+	value &= 0x3f;
+	value += 1;
+
+	if ((value < 12) ||
+	    (value > 33)) {
+		pr_err("DSIPHY has wrong value (%d)", value);
+		return 0;
+	}
+
+	return clk->parent->rate / value;
+}
+
+static long dsiphy_round_rate(struct clk *clk, unsigned long rate)
+{
+	return clk_rate_mult_range_round(clk, 12, 33, rate);
+}
+
+static void dsiphy_disable(struct clk *clk)
+{
+	u32 value;
+
+	value = __raw_readl(clk->mapping->base);
+	value &= ~0x000B8000;
+
+	__raw_writel(value , clk->mapping->base);
+}
+
+static int dsiphy_enable(struct clk *clk)
+{
+	u32 value;
+	int multi;
+
+	value = __raw_readl(clk->mapping->base);
+	multi = (value & 0x3f) + 1;
+
+	if ((multi < 12) || (multi > 33))
+		return -EIO;
+
+	__raw_writel(value | 0x000B8000, clk->mapping->base);
+
+	return 0;
+}
+
+static int dsiphy_set_rate(struct clk *clk, unsigned long rate)
+{
+	u32 value;
+	int idx;
+
+	idx = rate / clk->parent->rate;
+	if ((idx < 12) || (idx > 33))
+		return -EINVAL;
+
+	idx += -1;
+
+	value = __raw_readl(clk->mapping->base);
+	value = (value & ~0x3f) + idx;
+
+	__raw_writel(value, clk->mapping->base);
+
+	return 0;
+}
+
+static struct clk_ops dsiphy_clk_ops = {
+	.recalc		= dsiphy_recalc,
+	.round_rate	= dsiphy_round_rate,
+	.set_rate	= dsiphy_set_rate,
+	.enable		= dsiphy_enable,
+	.disable	= dsiphy_disable,
+};
+
+static struct clk_mapping dsi0phy_clk_mapping = {
+	.phys	= DSI0PHYCR,
+	.len	= 4,
+};
+
+static struct clk_mapping dsi1phy_clk_mapping = {
+	.phys	= DSI1PHYCR,
+	.len	= 4,
+};
+
+static struct clk dsi0phy_clk = {
+	.ops		= &dsiphy_clk_ops,
+	.parent		= &div6_clks[DIV6_DSI0P], /* late install */
+	.mapping	= &dsi0phy_clk_mapping,
+};
+
+static struct clk dsi1phy_clk = {
+	.ops		= &dsiphy_clk_ops,
+	.parent		= &div6_clks[DIV6_DSI1P], /* late install */
+	.mapping	= &dsi1phy_clk_mapping,
+};
+
+static struct clk *late_main_clks[] = {
+	&dsi0phy_clk,
+	&dsi1phy_clk,
+};
+
 enum { MSTP001,
 	MSTP129, MSTP128, MSTP127, MSTP126, MSTP125, MSTP118, MSTP116, MSTP100,
 	MSTP219,
@@ -429,6 +537,8 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSIT]),
 	CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSI0P]),
 	CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSI1P]),
+	CLKDEV_ICK_ID("dsiphy_clk", "sh-mipi-dsi.0", &dsi0phy_clk),
+	CLKDEV_ICK_ID("dsiphy_clk", "sh-mipi-dsi.1", &dsi1phy_clk),
 
 	/* MSTP32 clocks */
 	CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* I2C2 */
@@ -504,6 +614,9 @@ void __init sh73a0_clock_init(void)
 	if (!ret)
 		ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
 
+	for (k = 0; !ret && (k < ARRAY_SIZE(late_main_clks)); k++)
+		ret = clk_register(late_main_clks[k]);
+
 	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
 
 	if (!ret)

arch/arm/mach-shmobile/include/mach/sh73a0.h

@@ -515,8 +515,8 @@ enum {
 	SHDMA_SLAVE_MMCIF_RX,
 };
 
-/* PINT interrupts are located at Linux IRQ 768 and up */
-#define SH73A0_PINT0_IRQ(irq) ((irq) + 768)
-#define SH73A0_PINT1_IRQ(irq) ((irq) + 800)
+/* PINT interrupts are located at Linux IRQ 800 and up */
+#define SH73A0_PINT0_IRQ(irq) ((irq) + 800)
+#define SH73A0_PINT1_IRQ(irq) ((irq) + 832)
 
 #endif /* __ASM_SH73A0_H__ */

arch/arm/mach-shmobile/intc-sh73a0.c

@@ -19,6 +19,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
+#include <linux/module.h>
 #include <linux/irq.h>
 #include <linux/io.h>
 #include <linux/sh_intc.h>
@@ -445,6 +446,7 @@ void __init sh73a0_init_irq(void)
 		setup_irq(gic_spi(1 + k), &sh73a0_irq_pin_cascade[k]);
 
 		n = intcs_evt2irq(to_intc_vect(gic_spi(1 + k)));
+		WARN_ON(irq_alloc_desc_at(n, numa_node_id()) != n);
 		irq_set_chip_and_handler_name(n, &intca_gic_irq_chip,
 					      handle_level_irq, "level");
 		set_irq_flags(n, IRQF_VALID); /* yuck */

arch/arm/mach-shmobile/pfc-r8a7779.c

@@ -2120,7 +2120,7 @@ static struct pinmux_cfg_reg pinmux_config_regs[] = {
 	    FN_AUDATA3, 0, 0, 0 }
 	},
 	{ PINMUX_CFG_REG_VAR("IPSR4", 0xfffc0030, 32,
-			     3, 1, 1, 1, 1, 1, 1, 3, 3, 1,
+			     3, 1, 1, 1, 1, 1, 1, 3, 3,
 			     1, 1, 1, 1, 1, 1, 3, 3, 3, 2) {
 	    /* IP4_31_29 [3] */
 	    FN_DU1_DB0, FN_VI2_DATA4_VI2_B4, FN_SCL2_B, FN_SD3_DAT0,

arch/arm/mach-shmobile/pfc-sh7372.c

@@ -23,6 +23,7 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/gpio.h>
+#include <mach/irqs.h>
 #include <mach/sh7372.h>
 
 #define CPU_ALL_PORT(fn, pfx, sfx) \
@@ -1594,6 +1595,43 @@ static struct pinmux_data_reg pinmux_data_regs[] = {
 	{ },
 };
 
+#define EXT_IRQ16L(n) evt2irq(0x200 + ((n) << 5))
+#define EXT_IRQ16H(n) evt2irq(0x3200 + (((n) - 16) << 5))
+static struct pinmux_irq pinmux_irqs[] = {
+	PINMUX_IRQ(EXT_IRQ16L(0), PORT6_FN0, PORT162_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(1), PORT12_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(2), PORT4_FN0, PORT5_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(3), PORT8_FN0, PORT16_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(4), PORT17_FN0, PORT163_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(5), PORT18_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(6), PORT39_FN0, PORT164_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(7), PORT40_FN0, PORT167_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(8), PORT41_FN0, PORT168_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(9), PORT42_FN0, PORT169_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(10), PORT65_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(11), PORT67_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(12), PORT80_FN0, PORT137_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(13), PORT81_FN0, PORT145_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(14), PORT82_FN0, PORT146_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(15), PORT83_FN0, PORT147_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(16), PORT84_FN0, PORT170_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(17), PORT85_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(18), PORT86_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(19), PORT87_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(20), PORT92_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(21), PORT93_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(22), PORT94_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(23), PORT95_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(24), PORT112_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(25), PORT119_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(26), PORT121_FN0, PORT172_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(27), PORT122_FN0, PORT180_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(28), PORT123_FN0, PORT181_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(29), PORT129_FN0, PORT182_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(30), PORT130_FN0, PORT183_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(31), PORT138_FN0, PORT184_FN0),
+};
+
 static struct pinmux_info sh7372_pinmux_info = {
 	.name = "sh7372_pfc",
 	.reserved_id = PINMUX_RESERVED,
@@ -1614,6 +1652,9 @@ static struct pinmux_info sh7372_pinmux_info = {
 
 	.gpio_data = pinmux_data,
 	.gpio_data_size = ARRAY_SIZE(pinmux_data),
+
+	.gpio_irq = pinmux_irqs,
+	.gpio_irq_size = ARRAY_SIZE(pinmux_irqs),
 };
 
 void sh7372_pinmux_init(void)

arch/arm/mach-shmobile/smp-sh73a0.c

@@ -80,7 +80,7 @@ int __cpuinit sh73a0_boot_secondary(unsigned int cpu)
 	/* enable cache coherency */
 	modify_scu_cpu_psr(0, 3 << (cpu * 8));
 
-	if (((__raw_readw(__io(PSTR)) >> (4 * cpu)) & 3) == 3)
+	if (((__raw_readl(__io(PSTR)) >> (4 * cpu)) & 3) == 3)
 		__raw_writel(1 << cpu, __io(WUPCR));	/* wake up */
 	else
 		__raw_writel(1 << cpu, __io(SRESCR));	/* reset */

arch/arm/mm/Kconfig

@@ -631,7 +631,8 @@ comment "Processor Features"
 
 config ARM_LPAE
 	bool "Support for the Large Physical Address Extension"
-	depends on MMU && CPU_V7
+	depends on MMU && CPU_32v7 && !CPU_32v6 && !CPU_32v5 && \
+		!CPU_32v4 && !CPU_32v3
 	help
 	  Say Y if you have an ARMv7 processor supporting the LPAE page
 	  table format and you would like to access memory beyond the

arch/arm/mm/cache-v7.S

@@ -55,7 +55,7 @@ loop1:
 	cmp	r1, #2				@ see what cache we have at this level
 	blt	skip				@ skip if no cache, or just i-cache
 #ifdef CONFIG_PREEMPT
-	save_and_disable_irqs r9		@ make cssr&csidr read atomic
+	save_and_disable_irqs_notrace r9	@ make cssr&csidr read atomic
 #endif
 	mcr	p15, 2, r10, c0, c0, 0		@ select current cache level in cssr
 	isb					@ isb to sych the new cssr&csidr

arch/c6x/boot/Makefile

@@ -13,7 +13,7 @@ obj-y += linked_dtb.o
 endif
 
 $(obj)/%.dtb: $(src)/dts/%.dts FORCE
-	$(call cmd,dtc)
+	$(call if_changed_dep,dtc)
 
 quiet_cmd_cp = CP      $< $@$2
 	cmd_cp = cat $< >$@$2 || (rm -f $@ && echo false)

arch/m68k/include/asm/mcf_pgtable.h

@@ -78,7 +78,8 @@
 				 | CF_PAGE_READABLE \
 				 | CF_PAGE_WRITABLE \
 				 | CF_PAGE_EXEC \
-				 | CF_PAGE_SYSTEM)
+				 | CF_PAGE_SYSTEM \
+				 | CF_PAGE_SHARED)
 
 #define PAGE_COPY	__pgprot(CF_PAGE_VALID \
 				 | CF_PAGE_ACCESSED \

arch/m68k/mm/mcfmmu.c

@@ -87,7 +87,7 @@ void __init paging_init(void)
 
 int cf_tlb_miss(struct pt_regs *regs, int write, int dtlb, int extension_word)
 {
-	unsigned long flags, mmuar;
+	unsigned long flags, mmuar, mmutr;
 	struct mm_struct *mm;
 	pgd_t *pgd;
 	pmd_t *pmd;
@@ -137,9 +137,10 @@ int cf_tlb_miss(struct pt_regs *regs, int write, int dtlb, int extension_word)
 	if (!pte_dirty(*pte) && !KMAPAREA(mmuar))
 		set_pte(pte, pte_wrprotect(*pte));
 
-	mmu_write(MMUTR, (mmuar & PAGE_MASK) | (asid << MMUTR_IDN) |
-		(((int)(pte->pte) & (int)CF_PAGE_MMUTR_MASK)
-		>> CF_PAGE_MMUTR_SHIFT) | MMUTR_V);
+	mmutr = (mmuar & PAGE_MASK) | (asid << MMUTR_IDN) | MMUTR_V;
+	if ((mmuar < TASK_UNMAPPED_BASE) || (mmuar >= TASK_SIZE))
+		mmutr |= (pte->pte & CF_PAGE_MMUTR_MASK) >> CF_PAGE_MMUTR_SHIFT;
+	mmu_write(MMUTR, mmutr);
 
 	mmu_write(MMUDR, (pte_val(*pte) & PAGE_MASK) |
 		((pte->pte) & CF_PAGE_MMUDR_MASK) | MMUDR_SZ_8KB | MMUDR_X);

arch/m68k/platform/coldfire/entry.S

@@ -136,7 +136,7 @@ Luser_return:
 	movel	%sp,%d1			/* get thread_info pointer */
 	andl	#-THREAD_SIZE,%d1	/* at base of kernel stack */
 	movel	%d1,%a0
-	movel	%a0@(TINFO_FLAGS),%d1	/* get thread_info->flags */
+	moveb	%a0@(TINFO_FLAGS+3),%d1	/* thread_info->flags (low 8 bits) */
 	jne	Lwork_to_do		/* still work to do */
 
 Lreturn:
@@ -148,8 +148,6 @@ Lwork_to_do:
 	btst	#TIF_NEED_RESCHED,%d1
 	jne	reschedule
 
-	/* GERG: do we need something here for TRACEing?? */
-
 Lsignal_return:
 	subql	#4,%sp			/* dummy return address */
 	SAVE_SWITCH_STACK

arch/powerpc/kernel/entry_32.S

@@ -1213,7 +1213,7 @@ do_user_signal:			/* r10 contains MSR_KERNEL here */
 	stw	r3,_TRAP(r1)
 2:	addi	r3,r1,STACK_FRAME_OVERHEAD
 	mr	r4,r9
-	bl	do_signal
+	bl	do_notify_resume
 	REST_NVGPRS(r1)
 	b	recheck
 

arch/powerpc/kernel/entry_64.S

@@ -751,12 +751,16 @@ user_work:
 
 	andi.	r0,r4,_TIF_NEED_RESCHED
 	beq	1f
+	li	r5,1
+	TRACE_AND_RESTORE_IRQ(r5);
 	bl	.schedule
 	b	.ret_from_except_lite
 
 1:	bl	.save_nvgprs
+	li	r5,1
+	TRACE_AND_RESTORE_IRQ(r5);
 	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	.do_signal
+	bl	.do_notify_resume
 	b	.ret_from_except
 
 unrecov_restore:

arch/powerpc/kernel/exceptions-64s.S

@@ -774,8 +774,8 @@ alignment_common:
 program_check_common:
 	EXCEPTION_PROLOG_COMMON(0x700, PACA_EXGEN)
 	bl	.save_nvgprs
-	addi	r3,r1,STACK_FRAME_OVERHEAD
 	DISABLE_INTS
+	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	.program_check_exception
 	b	.ret_from_except
 

arch/powerpc/kernel/signal.c

@@ -11,6 +11,7 @@
 
 #include <linux/tracehook.h>
 #include <linux/signal.h>
+#include <linux/key.h>
 #include <asm/hw_breakpoint.h>
 #include <asm/uaccess.h>
 #include <asm/unistd.h>
@@ -113,8 +114,9 @@ static void check_syscall_restart(struct pt_regs *regs, struct k_sigaction *ka,
 	}
 }
 
-static int do_signal_pending(sigset_t *oldset, struct pt_regs *regs)
+static int do_signal(struct pt_regs *regs)
 {
+	sigset_t *oldset;
 	siginfo_t info;
 	int signr;
 	struct k_sigaction ka;
@@ -123,7 +125,7 @@ static int do_signal_pending(sigset_t *oldset, struct pt_regs *regs)
 
 	if (current_thread_info()->local_flags & _TLF_RESTORE_SIGMASK)
 		oldset = &current->saved_sigmask;
-	else if (!oldset)
+	else
 		oldset = &current->blocked;
 
 	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
@@ -191,14 +193,16 @@ static int do_signal_pending(sigset_t *oldset, struct pt_regs *regs)
 	return ret;
 }
 
-void do_signal(struct pt_regs *regs, unsigned long thread_info_flags)
+void do_notify_resume(struct pt_regs *regs, unsigned long thread_info_flags)
 {
 	if (thread_info_flags & _TIF_SIGPENDING)
-		do_signal_pending(NULL, regs);
+		do_signal(regs);
 
 	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
 		clear_thread_flag(TIF_NOTIFY_RESUME);
 		tracehook_notify_resume(regs);
+		if (current->replacement_session_keyring)
+			key_replace_session_keyring();
 	}
 }
 

arch/powerpc/kernel/signal.h

@@ -12,7 +12,7 @@
 
 #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
 
-extern void do_signal(struct pt_regs *regs, unsigned long thread_info_flags);
+extern void do_notify_resume(struct pt_regs *regs, unsigned long thread_info_flags);
 
 extern void __user * get_sigframe(struct k_sigaction *ka, struct pt_regs *regs,
 				  size_t frame_size, int is_32);

arch/powerpc/platforms/wsp/smp.c

@@ -71,7 +71,7 @@ int __devinit smp_a2_kick_cpu(int nr)
 
 static int __init smp_a2_probe(void)
 {
-	return cpus_weight(cpu_possible_map);
+	return num_possible_cpus();
 }
 
 static struct smp_ops_t a2_smp_ops = {

arch/s390/kernel/compat_wrapper.S

@@ -662,7 +662,7 @@ ENTRY(sys32_getresuid16_wrapper)
 ENTRY(sys32_poll_wrapper)
 	llgtr	%r2,%r2			# struct pollfd *
 	llgfr	%r3,%r3			# unsigned int
-	lgfr	%r4,%r4			# long
+	lgfr	%r4,%r4			# int
 	jg	sys_poll		# branch to system call
 
 ENTRY(sys32_setresgid16_wrapper)

arch/sh/boards/board-sh7757lcr.c

@@ -168,6 +168,11 @@ static struct resource sh_eth_giga1_resources[] = {
 		.start  = 0xfee00800,
 		.end    = 0xfee00fff,
 		.flags  = IORESOURCE_MEM,
+	}, {
+		/* TSU */
+		.start  = 0xfee01800,
+		.end    = 0xfee01fff,
+		.flags  = IORESOURCE_MEM,
 	}, {
 		.start  = 316,
 		.end    = 316,
@@ -210,20 +215,13 @@ static struct resource sh_mmcif_resources[] = {
 	},
 };
 
-static struct sh_mmcif_dma sh7757lcr_mmcif_dma = {
-	.chan_priv_tx	= {
-		.slave_id = SHDMA_SLAVE_MMCIF_TX,
-	},
-	.chan_priv_rx	= {
-		.slave_id = SHDMA_SLAVE_MMCIF_RX,
-	}
-};
-
 static struct sh_mmcif_plat_data sh_mmcif_plat = {
-	.dma		= &sh7757lcr_mmcif_dma,
 	.sup_pclk	= 0x0f,
-	.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
+	.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA |
+			  MMC_CAP_NONREMOVABLE,
 	.ocr		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.slave_id_tx	= SHDMA_SLAVE_MMCIF_TX,
+	.slave_id_rx	= SHDMA_SLAVE_MMCIF_RX,
 };
 
 static struct platform_device sh_mmcif_device = {

arch/sh/boards/mach-ap325rxa/setup.c

@@ -22,6 +22,7 @@
 #include <linux/i2c.h>
 #include <linux/smsc911x.h>
 #include <linux/gpio.h>
+#include <linux/videodev2.h>
 #include <media/ov772x.h>
 #include <media/soc_camera.h>
 #include <media/soc_camera_platform.h>

arch/sh/boards/mach-ecovec24/setup.c

@@ -29,9 +29,11 @@
 #include <linux/input.h>
 #include <linux/input/sh_keysc.h>
 #include <linux/sh_eth.h>
+#include <linux/videodev2.h>
 #include <video/sh_mobile_lcdc.h>
 #include <sound/sh_fsi.h>
 #include <media/sh_mobile_ceu.h>
+#include <media/soc_camera.h>
 #include <media/tw9910.h>
 #include <media/mt9t112.h>
 #include <asm/heartbeat.h>

arch/sh/boards/mach-kfr2r09/setup.c

@@ -22,6 +22,7 @@
 #include <linux/input/sh_keysc.h>
 #include <linux/i2c.h>
 #include <linux/usb/r8a66597.h>
+#include <linux/videodev2.h>
 #include <media/rj54n1cb0c.h>
 #include <media/soc_camera.h>
 #include <media/sh_mobile_ceu.h>

arch/sh/boards/mach-migor/setup.c

@@ -21,9 +21,11 @@
 #include <linux/delay.h>
 #include <linux/clk.h>
 #include <linux/gpio.h>
+#include <linux/videodev2.h>
 #include <video/sh_mobile_lcdc.h>
 #include <media/sh_mobile_ceu.h>
 #include <media/ov772x.h>
+#include <media/soc_camera.h>
 #include <media/tw9910.h>
 #include <asm/clock.h>
 #include <asm/machvec.h>

arch/sh/boards/mach-se/7724/setup.c

@@ -24,6 +24,7 @@
 #include <linux/input/sh_keysc.h>
 #include <linux/usb/r8a66597.h>
 #include <linux/sh_eth.h>
+#include <linux/videodev2.h>
 #include <video/sh_mobile_lcdc.h>
 #include <media/sh_mobile_ceu.h>
 #include <sound/sh_fsi.h>

arch/sh/drivers/pci/pci-sh7780.c

@@ -74,7 +74,7 @@ struct pci_errors {
 	{ SH4_PCIINT_MLCK,	"master lock error" },
 	{ SH4_PCIINT_TABT,	"target-target abort" },
 	{ SH4_PCIINT_TRET,	"target retry time out" },
-	{ SH4_PCIINT_MFDE,	"master function disable erorr" },
+	{ SH4_PCIINT_MFDE,	"master function disable error" },
 	{ SH4_PCIINT_PRTY,	"address parity error" },
 	{ SH4_PCIINT_SERR,	"SERR" },
 	{ SH4_PCIINT_TWDP,	"data parity error for target write" },

arch/sh/include/asm/device.h

@@ -3,9 +3,10 @@
  *
  * This file is released under the GPLv2
  */
+#ifndef __ASM_SH_DEVICE_H
+#define __ASM_SH_DEVICE_H
 
-struct dev_archdata {
-};
+#include <asm-generic/device.h>
 
 struct platform_device;
 /* allocate contiguous memory chunk and fill in struct resource */
@@ -14,5 +15,4 @@ int platform_resource_setup_memory(struct platform_device *pdev,
 
 void plat_early_device_setup(void);
 
-struct pdev_archdata {
-};
+#endif /* __ASM_SH_DEVICE_H */

arch/sh/kernel/cpu/sh4a/clock-sh7724.c

@@ -343,7 +343,7 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh_mobile_ceu.1", &mstp_clks[HWBLK_CEU1]),
 	CLKDEV_CON_ID("beu1", &mstp_clks[HWBLK_BEU1]),
 	CLKDEV_CON_ID("2ddmac0", &mstp_clks[HWBLK_2DDMAC]),
-	CLKDEV_CON_ID("spu0", &mstp_clks[HWBLK_SPU]),
+	CLKDEV_DEV_ID("sh_fsi.0", &mstp_clks[HWBLK_SPU]),
 	CLKDEV_CON_ID("jpu0", &mstp_clks[HWBLK_JPU]),
 	CLKDEV_DEV_ID("sh-vou.0", &mstp_clks[HWBLK_VOU]),
 	CLKDEV_CON_ID("beu0", &mstp_clks[HWBLK_BEU0]),

arch/sh/kernel/cpu/sh4a/setup-sh7757.c

@@ -133,7 +133,7 @@ static struct resource spi0_resources[] = {
 	[0] = {
 		.start	= 0xfe002000,
 		.end	= 0xfe0020ff,
-		.flags	= IORESOURCE_MEM,
+		.flags	= IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
 	},
 	[1] = {
 		.start	= 86,
@@ -661,6 +661,25 @@ static struct platform_device spi0_device = {
 	.resource	= spi0_resources,
 };
 
+static struct resource spi1_resources[] = {
+	{
+		.start	= 0xffd8ee70,
+		.end	= 0xffd8eeff,
+		.flags	= IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
+	},
+	{
+		.start	= 54,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device spi1_device = {
+	.name	= "sh_spi",
+	.id	= 1,
+	.num_resources	= ARRAY_SIZE(spi1_resources),
+	.resource	= spi1_resources,
+};
+
 static struct resource usb_ehci_resources[] = {
 	[0] = {
 		.start	= 0xfe4f1000,
@@ -720,6 +739,7 @@ static struct platform_device *sh7757_devices[] __initdata = {
 	&dma2_device,
 	&dma3_device,
 	&spi0_device,
+	&spi1_device,
 	&usb_ehci_device,
 	&usb_ohci_device,
 };

arch/sh/kernel/smp.c

@@ -63,7 +63,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 	mp_ops->prepare_cpus(max_cpus);
 
 #ifndef CONFIG_HOTPLUG_CPU
-	init_cpu_present(&cpu_possible_map);
+	init_cpu_present(cpu_possible_mask);
 #endif
 }
 

arch/sh/kernel/topology.c

@@ -27,7 +27,7 @@ static cpumask_t cpu_coregroup_map(unsigned int cpu)
 	 * Presently all SH-X3 SMP cores are multi-cores, so just keep it
 	 * simple until we have a method for determining topology..
 	 */
-	return cpu_possible_map;
+	return *cpu_possible_mask;
 }
 
 const struct cpumask *cpu_coregroup_mask(unsigned int cpu)

arch/sh/mm/cache-sh2a.c

@@ -23,6 +23,7 @@
 #define MAX_OCACHE_PAGES	32
 #define MAX_ICACHE_PAGES	32
 
+#ifdef CONFIG_CACHE_WRITEBACK
 static void sh2a_flush_oc_line(unsigned long v, int way)
 {
 	unsigned long addr = (v & 0x000007f0) | (way << 11);
@@ -34,6 +35,7 @@ static void sh2a_flush_oc_line(unsigned long v, int way)
 		__raw_writel(data, CACHE_OC_ADDRESS_ARRAY | addr);
 	}
 }
+#endif
 
 static void sh2a_invalidate_line(unsigned long cache_addr, unsigned long v)
 {

drivers/atm/solos-pci.c

@@ -1206,9 +1206,9 @@ static int fpga_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	
  out_unmap_both:
 	pci_set_drvdata(dev, NULL);
-	pci_iounmap(dev, card->config_regs);
- out_unmap_config:
 	pci_iounmap(dev, card->buffers);
+ out_unmap_config:
+	pci_iounmap(dev, card->config_regs);
  out_release_regions:
 	pci_release_regions(dev);
  out:

drivers/block/nvme.c

@@ -41,6 +41,8 @@
 #include <linux/types.h>
 #include <linux/version.h>
 
+#include <asm-generic/io-64-nonatomic-lo-hi.h>
+
 #define NVME_Q_DEPTH 1024
 #define SQ_SIZE(depth)		(depth * sizeof(struct nvme_command))
 #define CQ_SIZE(depth)		(depth * sizeof(struct nvme_completion))

drivers/bluetooth/btusb.c

@@ -102,6 +102,7 @@ static struct usb_device_id btusb_table[] = {
 
 	/* Broadcom BCM20702A0 */
 	{ USB_DEVICE(0x0a5c, 0x21e3) },
+	{ USB_DEVICE(0x0a5c, 0x21f3) },
 	{ USB_DEVICE(0x413c, 0x8197) },
 
 	{ }	/* Terminating entry */
@@ -726,9 +727,6 @@ static int btusb_send_frame(struct sk_buff *skb)
 		usb_fill_bulk_urb(urb, data->udev, pipe,
 				skb->data, skb->len, btusb_tx_complete, skb);
 
-		if (skb->priority >= HCI_PRIO_MAX - 1)
-			urb->transfer_flags  = URB_ISO_ASAP;
-
 		hdev->stat.acl_tx++;
 		break;
 

drivers/cpuidle/Kconfig

@@ -1,7 +1,7 @@
 
 config CPU_IDLE
 	bool "CPU idle PM support"
-	default ACPI
+	default y if ACPI || PPC_PSERIES
 	help
 	  CPU idle is a generic framework for supporting software-controlled
 	  idle processor power management.  It includes modular cross-platform

drivers/edac/i3200_edac.c

@@ -15,6 +15,8 @@
 #include <linux/io.h>
 #include "edac_core.h"
 
+#include <asm-generic/io-64-nonatomic-lo-hi.h>
+
 #define I3200_REVISION        "1.1"
 
 #define EDAC_MOD_STR        "i3200_edac"
@@ -101,19 +103,6 @@ struct i3200_priv {
 
 static int nr_channels;
 
-#ifndef readq
-static inline __u64 readq(const volatile void __iomem *addr)
-{
-	const volatile u32 __iomem *p = addr;
-	u32 low, high;
-
-	low = readl(p);
-	high = readl(p + 1);
-
-	return low + ((u64)high << 32);
-}
-#endif
-
 static int how_many_channels(struct pci_dev *pdev)
 {
 	unsigned char capid0_8b; /* 8th byte of CAPID0 */

drivers/gpu/drm/exynos/exynos_drm_core.c

@@ -193,6 +193,9 @@ int exynos_drm_subdrv_register(struct exynos_drm_subdrv *subdrv)
 			return err;
 		}
 
+		/* setup possible_clones. */
+		exynos_drm_encoder_setup(drm_dev);
+
 		/*
 		 * if any specific driver such as fimd or hdmi driver called
 		 * exynos_drm_subdrv_register() later than drm_load(),

drivers/gpu/drm/exynos/exynos_drm_crtc.c

@@ -307,9 +307,6 @@ static int exynos_drm_crtc_page_flip(struct drm_crtc *crtc,
 		 */
 		event->pipe = exynos_crtc->pipe;
 
-		list_add_tail(&event->base.link,
-				&dev_priv->pageflip_event_list);
-
 		ret = drm_vblank_get(dev, exynos_crtc->pipe);
 		if (ret) {
 			DRM_DEBUG("failed to acquire vblank counter\n");
@@ -318,6 +315,9 @@ static int exynos_drm_crtc_page_flip(struct drm_crtc *crtc,
 			goto out;
 		}
 
+		list_add_tail(&event->base.link,
+				&dev_priv->pageflip_event_list);
+
 		crtc->fb = fb;
 		ret = exynos_drm_crtc_update(crtc);
 		if (ret) {

drivers/gpu/drm/exynos/exynos_drm_drv.c

@@ -33,6 +33,7 @@
 
 #include "exynos_drm_drv.h"
 #include "exynos_drm_crtc.h"
+#include "exynos_drm_encoder.h"
 #include "exynos_drm_fbdev.h"
 #include "exynos_drm_fb.h"
 #include "exynos_drm_gem.h"
@@ -99,6 +100,9 @@ static int exynos_drm_load(struct drm_device *dev, unsigned long flags)
 	if (ret)
 		goto err_vblank;
 
+	/* setup possible_clones. */
+	exynos_drm_encoder_setup(dev);
+
 	/*
 	 * create and configure fb helper and also exynos specific
 	 * fbdev object.
@@ -141,16 +145,21 @@ static int exynos_drm_unload(struct drm_device *dev)
 }
 
 static void exynos_drm_preclose(struct drm_device *dev,
-					struct drm_file *file_priv)
+					struct drm_file *file)
 {
-	struct exynos_drm_private *dev_priv = dev->dev_private;
+	DRM_DEBUG_DRIVER("%s\n", __FILE__);
 
-	/*
-	 * drm framework frees all events at release time,
-	 * so private event list should be cleared.
-	 */
-	if (!list_empty(&dev_priv->pageflip_event_list))
-		INIT_LIST_HEAD(&dev_priv->pageflip_event_list);
+}
+
+static void exynos_drm_postclose(struct drm_device *dev, struct drm_file *file)
+{
+	DRM_DEBUG_DRIVER("%s\n", __FILE__);
+
+	if (!file->driver_priv)
+		return;
+
+	kfree(file->driver_priv);
+	file->driver_priv = NULL;
 }
 
 static void exynos_drm_lastclose(struct drm_device *dev)
@@ -195,6 +204,7 @@ static struct drm_driver exynos_drm_driver = {
 	.unload			= exynos_drm_unload,
 	.preclose		= exynos_drm_preclose,
 	.lastclose		= exynos_drm_lastclose,
+	.postclose		= exynos_drm_postclose,
 	.get_vblank_counter	= drm_vblank_count,
 	.enable_vblank		= exynos_drm_crtc_enable_vblank,
 	.disable_vblank		= exynos_drm_crtc_disable_vblank,

drivers/gpu/drm/exynos/exynos_drm_encoder.c

@@ -195,6 +195,40 @@ static struct drm_encoder_funcs exynos_encoder_funcs = {
 	.destroy = exynos_drm_encoder_destroy,
 };
 
+static unsigned int exynos_drm_encoder_clones(struct drm_encoder *encoder)
+{
+	struct drm_encoder *clone;
+	struct drm_device *dev = encoder->dev;
+	struct exynos_drm_encoder *exynos_encoder = to_exynos_encoder(encoder);
+	struct exynos_drm_display_ops *display_ops =
+				exynos_encoder->manager->display_ops;
+	unsigned int clone_mask = 0;
+	int cnt = 0;
+
+	list_for_each_entry(clone, &dev->mode_config.encoder_list, head) {
+		switch (display_ops->type) {
+		case EXYNOS_DISPLAY_TYPE_LCD:
+		case EXYNOS_DISPLAY_TYPE_HDMI:
+			clone_mask |= (1 << (cnt++));
+			break;
+		default:
+			continue;
+		}
+	}
+
+	return clone_mask;
+}
+
+void exynos_drm_encoder_setup(struct drm_device *dev)
+{
+	struct drm_encoder *encoder;
+
+	DRM_DEBUG_KMS("%s\n", __FILE__);
+
+	list_for_each_entry(encoder, &dev->mode_config.encoder_list, head)
+		encoder->possible_clones = exynos_drm_encoder_clones(encoder);
+}
+
 struct drm_encoder *
 exynos_drm_encoder_create(struct drm_device *dev,
 			   struct exynos_drm_manager *manager,

drivers/gpu/drm/exynos/exynos_drm_encoder.h

@@ -30,6 +30,7 @@
 
 struct exynos_drm_manager;
 
+void exynos_drm_encoder_setup(struct drm_device *dev);
 struct drm_encoder *exynos_drm_encoder_create(struct drm_device *dev,
 					       struct exynos_drm_manager *mgr,
 					       unsigned int possible_crtcs);

drivers/gpu/drm/exynos/exynos_drm_fbdev.c

@@ -195,66 +195,6 @@ out:
 	return ret;
 }
 
-static bool
-exynos_drm_fbdev_is_samefb(struct drm_framebuffer *fb,
-			    struct drm_fb_helper_surface_size *sizes)
-{
-	if (fb->width != sizes->surface_width)
-		return false;
-	if (fb->height != sizes->surface_height)
-		return false;
-	if (fb->bits_per_pixel != sizes->surface_bpp)
-		return false;
-	if (fb->depth != sizes->surface_depth)
-		return false;
-
-	return true;
-}
-
-static int exynos_drm_fbdev_recreate(struct drm_fb_helper *helper,
-				      struct drm_fb_helper_surface_size *sizes)
-{
-	struct drm_device *dev = helper->dev;
-	struct exynos_drm_fbdev *exynos_fbdev = to_exynos_fbdev(helper);
-	struct exynos_drm_gem_obj *exynos_gem_obj;
-	struct drm_framebuffer *fb = helper->fb;
-	struct drm_mode_fb_cmd2 mode_cmd = { 0 };
-	unsigned long size;
-
-	DRM_DEBUG_KMS("%s\n", __FILE__);
-
-	if (exynos_drm_fbdev_is_samefb(fb, sizes))
-		return 0;
-
-	mode_cmd.width = sizes->surface_width;
-	mode_cmd.height = sizes->surface_height;
-	mode_cmd.pitches[0] = sizes->surface_width * (sizes->surface_bpp >> 3);
-	mode_cmd.pixel_format = drm_mode_legacy_fb_format(sizes->surface_bpp,
-							  sizes->surface_depth);
-
-	if (exynos_fbdev->exynos_gem_obj)
-		exynos_drm_gem_destroy(exynos_fbdev->exynos_gem_obj);
-
-	if (fb->funcs->destroy)
-		fb->funcs->destroy(fb);
-
-	size = mode_cmd.pitches[0] * mode_cmd.height;
-	exynos_gem_obj = exynos_drm_gem_create(dev, size);
-	if (IS_ERR(exynos_gem_obj))
-		return PTR_ERR(exynos_gem_obj);
-
-	exynos_fbdev->exynos_gem_obj = exynos_gem_obj;
-
-	helper->fb = exynos_drm_framebuffer_init(dev, &mode_cmd,
-			&exynos_gem_obj->base);
-	if (IS_ERR_OR_NULL(helper->fb)) {
-		DRM_ERROR("failed to create drm framebuffer.\n");
-		return PTR_ERR(helper->fb);
-	}
-
-	return exynos_drm_fbdev_update(helper, helper->fb);
-}
-
 static int exynos_drm_fbdev_probe(struct drm_fb_helper *helper,
 				   struct drm_fb_helper_surface_size *sizes)
 {
@@ -262,6 +202,10 @@ static int exynos_drm_fbdev_probe(struct drm_fb_helper *helper,
 
 	DRM_DEBUG_KMS("%s\n", __FILE__);
 
+	/*
+	 * with !helper->fb, it means that this funcion is called first time
+	 * and after that, the helper->fb would be used as clone mode.
+	 */
 	if (!helper->fb) {
 		ret = exynos_drm_fbdev_create(helper, sizes);
 		if (ret < 0) {
@@ -274,12 +218,6 @@ static int exynos_drm_fbdev_probe(struct drm_fb_helper *helper,
 		 * because register_framebuffer() should be called.
 		 */
 		ret = 1;
-	} else {
-		ret = exynos_drm_fbdev_recreate(helper, sizes);
-		if (ret < 0) {
-			DRM_ERROR("failed to reconfigure fbdev\n");
-			return ret;
-		}
 	}
 
 	return ret;

drivers/gpu/drm/exynos/exynos_drm_fimd.c

@@ -604,7 +604,12 @@ static void fimd_finish_pageflip(struct drm_device *drm_dev, int crtc)
 	}
 
 	if (is_checked) {
-		drm_vblank_put(drm_dev, crtc);
+		/*
+		 * call drm_vblank_put only in case that drm_vblank_get was
+		 * called.
+		 */
+		if (atomic_read(&drm_dev->vblank_refcount[crtc]) > 0)
+			drm_vblank_put(drm_dev, crtc);
 
 		/*
 		 * don't off vblank if vblank_disable_allowed is 1,

drivers/gpu/drm/exynos/exynos_mixer.c

@@ -712,7 +712,12 @@ static void mixer_finish_pageflip(struct drm_device *drm_dev, int crtc)
 	}
 
 	if (is_checked)
-		drm_vblank_put(drm_dev, crtc);
+		/*
+		 * call drm_vblank_put only in case that drm_vblank_get was
+		 * called.
+		 */
+		if (atomic_read(&drm_dev->vblank_refcount[crtc]) > 0)
+			drm_vblank_put(drm_dev, crtc);
 
 	spin_unlock_irqrestore(&drm_dev->event_lock, flags);
 }
@@ -779,15 +784,15 @@ static void mixer_win_reset(struct mixer_context *ctx)
 	mixer_reg_writemask(res, MXR_STATUS, MXR_STATUS_16_BURST,
 		MXR_STATUS_BURST_MASK);
 
-	/* setting default layer priority: layer1 > video > layer0
+	/* setting default layer priority: layer1 > layer0 > video
 	 * because typical usage scenario would be
+	 * layer1 - OSD
 	 * layer0 - framebuffer
 	 * video - video overlay
-	 * layer1 - OSD
 	 */
-	val  = MXR_LAYER_CFG_GRP0_VAL(1);
-	val |= MXR_LAYER_CFG_VP_VAL(2);
-	val |= MXR_LAYER_CFG_GRP1_VAL(3);
+	val = MXR_LAYER_CFG_GRP1_VAL(3);
+	val |= MXR_LAYER_CFG_GRP0_VAL(2);
+	val |= MXR_LAYER_CFG_VP_VAL(1);
 	mixer_reg_write(res, MXR_LAYER_CFG, val);
 
 	/* setting background color */
@@ -1044,7 +1049,7 @@ static int mixer_remove(struct platform_device *pdev)
 					platform_get_drvdata(pdev);
 	struct mixer_context *ctx = (struct mixer_context *)drm_hdmi_ctx->ctx;
 
-	dev_info(dev, "remove sucessful\n");
+	dev_info(dev, "remove successful\n");
 
 	mixer_resource_poweroff(ctx);
 	mixer_resources_cleanup(ctx);

drivers/gpu/drm/i915/i915_reg.h

@@ -3028,6 +3028,20 @@
 #define  DISP_TILE_SURFACE_SWIZZLING	(1<<13)
 #define  DISP_FBC_WM_DIS		(1<<15)
 
+/* GEN7 chicken */
+#define GEN7_COMMON_SLICE_CHICKEN1		0x7010
+# define GEN7_CSC1_RHWO_OPT_DISABLE_IN_RCC	((1<<10) | (1<<26))
+
+#define GEN7_L3CNTLREG1				0xB01C
+#define  GEN7_WA_FOR_GEN7_L3_CONTROL			0x3C4FFF8C
+
+#define GEN7_L3_CHICKEN_MODE_REGISTER		0xB030
+#define  GEN7_WA_L3_CHICKEN_MODE				0x20000000
+
+/* WaCatErrorRejectionIssue */
+#define GEN7_SQ_CHICKEN_MBCUNIT_CONFIG		0x9030
+#define  GEN7_SQ_CHICKEN_MBCUNIT_SQINTMOB	(1<<11)
+
 /* PCH */
 
 /* south display engine interrupt */
@@ -3618,6 +3632,7 @@
 #define    GT_FIFO_NUM_RESERVED_ENTRIES		20
 
 #define GEN6_UCGCTL2				0x9404
+# define GEN6_RCZUNIT_CLOCK_GATE_DISABLE		(1 << 13)
 # define GEN6_RCPBUNIT_CLOCK_GATE_DISABLE		(1 << 12)
 # define GEN6_RCCUNIT_CLOCK_GATE_DISABLE		(1 << 11)
 

drivers/gpu/drm/i915/intel_display.c

@@ -8184,8 +8184,8 @@ void gen6_enable_rps(struct drm_i915_private *dev_priv)
 	I915_WRITE(GEN6_RC6pp_THRESHOLD, 64000); /* unused */
 
 	if (intel_enable_rc6(dev_priv->dev))
-		rc6_mask = GEN6_RC_CTL_RC6p_ENABLE |
-			GEN6_RC_CTL_RC6_ENABLE;
+		rc6_mask = GEN6_RC_CTL_RC6_ENABLE |
+			(IS_GEN7(dev_priv->dev)) ? GEN6_RC_CTL_RC6p_ENABLE : 0;
 
 	I915_WRITE(GEN6_RC_CONTROL,
 		   rc6_mask |
@@ -8463,12 +8463,32 @@ static void ivybridge_init_clock_gating(struct drm_device *dev)
 	I915_WRITE(WM2_LP_ILK, 0);
 	I915_WRITE(WM1_LP_ILK, 0);
 
+	/* According to the spec, bit 13 (RCZUNIT) must be set on IVB.
+	 * This implements the WaDisableRCZUnitClockGating workaround.
+	 */
+	I915_WRITE(GEN6_UCGCTL2, GEN6_RCZUNIT_CLOCK_GATE_DISABLE);
+
 	I915_WRITE(ILK_DSPCLK_GATE, IVB_VRHUNIT_CLK_GATE);
 
 	I915_WRITE(IVB_CHICKEN3,
 		   CHICKEN3_DGMG_REQ_OUT_FIX_DISABLE |
 		   CHICKEN3_DGMG_DONE_FIX_DISABLE);
 
+	/* Apply the WaDisableRHWOOptimizationForRenderHang workaround. */
+	I915_WRITE(GEN7_COMMON_SLICE_CHICKEN1,
+		   GEN7_CSC1_RHWO_OPT_DISABLE_IN_RCC);
+
+	/* WaApplyL3ControlAndL3ChickenMode requires those two on Ivy Bridge */
+	I915_WRITE(GEN7_L3CNTLREG1,
+			GEN7_WA_FOR_GEN7_L3_CONTROL);
+	I915_WRITE(GEN7_L3_CHICKEN_MODE_REGISTER,
+			GEN7_WA_L3_CHICKEN_MODE);
+
+	/* This is required by WaCatErrorRejectionIssue */
+	I915_WRITE(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG,
+			I915_READ(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG) |
+			GEN7_SQ_CHICKEN_MBCUNIT_SQINTMOB);
+
 	for_each_pipe(pipe) {
 		I915_WRITE(DSPCNTR(pipe),
 			   I915_READ(DSPCNTR(pipe)) |

drivers/gpu/drm/radeon/evergreen.c

@@ -3223,6 +3223,7 @@ int evergreen_resume(struct radeon_device *rdev)
 	r = evergreen_startup(rdev);
 	if (r) {
 		DRM_ERROR("evergreen startup failed on resume\n");
+		rdev->accel_working = false;
 		return r;
 	}
 

drivers/gpu/drm/radeon/ni.c

@@ -1547,6 +1547,7 @@ int cayman_resume(struct radeon_device *rdev)
 	r = cayman_startup(rdev);
 	if (r) {
 		DRM_ERROR("cayman startup failed on resume\n");
+		rdev->accel_working = false;
 		return r;
 	}
 	return r;

drivers/gpu/drm/radeon/r100.c

@@ -3928,6 +3928,8 @@ static int r100_startup(struct radeon_device *rdev)
 
 int r100_resume(struct radeon_device *rdev)
 {
+	int r;
+
 	/* Make sur GART are not working */
 	if (rdev->flags & RADEON_IS_PCI)
 		r100_pci_gart_disable(rdev);
@@ -3947,7 +3949,11 @@ int r100_resume(struct radeon_device *rdev)
 	radeon_surface_init(rdev);
 
 	rdev->accel_working = true;
-	return r100_startup(rdev);
+	r = r100_startup(rdev);
+	if (r) {
+		rdev->accel_working = false;
+	}
+	return r;
 }
 
 int r100_suspend(struct radeon_device *rdev)

drivers/gpu/drm/radeon/r300.c

@@ -1431,6 +1431,8 @@ static int r300_startup(struct radeon_device *rdev)
 
 int r300_resume(struct radeon_device *rdev)
 {
+	int r;
+
 	/* Make sur GART are not working */
 	if (rdev->flags & RADEON_IS_PCIE)
 		rv370_pcie_gart_disable(rdev);
@@ -1452,7 +1454,11 @@ int r300_resume(struct radeon_device *rdev)
 	radeon_surface_init(rdev);
 
 	rdev->accel_working = true;
-	return r300_startup(rdev);
+	r = r300_startup(rdev);
+	if (r) {
+		rdev->accel_working = false;
+	}
+	return r;
 }
 
 int r300_suspend(struct radeon_device *rdev)

drivers/gpu/drm/radeon/r420.c

@@ -291,6 +291,8 @@ static int r420_startup(struct radeon_device *rdev)
 
 int r420_resume(struct radeon_device *rdev)
 {
+	int r;
+
 	/* Make sur GART are not working */
 	if (rdev->flags & RADEON_IS_PCIE)
 		rv370_pcie_gart_disable(rdev);
@@ -316,7 +318,11 @@ int r420_resume(struct radeon_device *rdev)
 	radeon_surface_init(rdev);
 
 	rdev->accel_working = true;
-	return r420_startup(rdev);
+	r = r420_startup(rdev);
+	if (r) {
+		rdev->accel_working = false;
+	}
+	return r;
 }
 
 int r420_suspend(struct radeon_device *rdev)

drivers/gpu/drm/radeon/r520.c

@@ -218,6 +218,8 @@ static int r520_startup(struct radeon_device *rdev)
 
 int r520_resume(struct radeon_device *rdev)
 {
+	int r;
+
 	/* Make sur GART are not working */
 	if (rdev->flags & RADEON_IS_PCIE)
 		rv370_pcie_gart_disable(rdev);
@@ -237,7 +239,11 @@ int r520_resume(struct radeon_device *rdev)
 	radeon_surface_init(rdev);
 
 	rdev->accel_working = true;
-	return r520_startup(rdev);
+	r = r520_startup(rdev);
+	if (r) {
+		rdev->accel_working = false;
+	}
+	return r;
 }
 
 int r520_init(struct radeon_device *rdev)

drivers/gpu/drm/radeon/r600.c

@@ -2529,6 +2529,7 @@ int r600_resume(struct radeon_device *rdev)
 	r = r600_startup(rdev);
 	if (r) {
 		DRM_ERROR("r600 startup failed on resume\n");
+		rdev->accel_working = false;
 		return r;
 	}
 

drivers/gpu/drm/radeon/radeon_atombios.c

@@ -3020,6 +3020,9 @@ radeon_atombios_encoder_dpms_scratch_regs(struct drm_encoder *encoder, bool on)
 	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
 	uint32_t bios_2_scratch;
 
+	if (ASIC_IS_DCE4(rdev))
+		return;
+
 	if (rdev->family >= CHIP_R600)
 		bios_2_scratch = RREG32(R600_BIOS_2_SCRATCH);
 	else

drivers/gpu/drm/radeon/radeon_cs.c

@@ -453,6 +453,10 @@ int radeon_cs_ioctl(struct drm_device *dev, void *data, struct drm_file *filp)
 	int r;
 
 	radeon_mutex_lock(&rdev->cs_mutex);
+	if (!rdev->accel_working) {
+		radeon_mutex_unlock(&rdev->cs_mutex);
+		return -EBUSY;
+	}
 	/* initialize parser */
 	memset(&parser, 0, sizeof(struct radeon_cs_parser));
 	parser.filp = filp;

drivers/gpu/drm/radeon/radeon_ring.c

@@ -500,8 +500,11 @@ static char radeon_debugfs_ib_names[RADEON_IB_POOL_SIZE][32];
 int radeon_debugfs_ring_init(struct radeon_device *rdev)
 {
 #if defined(CONFIG_DEBUG_FS)
-	return radeon_debugfs_add_files(rdev, radeon_debugfs_ring_info_list,
-					ARRAY_SIZE(radeon_debugfs_ring_info_list));
+	if (rdev->family >= CHIP_CAYMAN)
+		return radeon_debugfs_add_files(rdev, radeon_debugfs_ring_info_list,
+						ARRAY_SIZE(radeon_debugfs_ring_info_list));
+	else
+		return radeon_debugfs_add_files(rdev, radeon_debugfs_ring_info_list, 1);
 #else
 	return 0;
 #endif

drivers/gpu/drm/radeon/rs400.c

@@ -442,6 +442,8 @@ static int rs400_startup(struct radeon_device *rdev)
 
 int rs400_resume(struct radeon_device *rdev)
 {
+	int r;
+
 	/* Make sur GART are not working */
 	rs400_gart_disable(rdev);
 	/* Resume clock before doing reset */
@@ -462,7 +464,11 @@ int rs400_resume(struct radeon_device *rdev)
 	radeon_surface_init(rdev);
 
 	rdev->accel_working = true;
-	return rs400_startup(rdev);
+	r = rs400_startup(rdev);
+	if (r) {
+		rdev->accel_working = false;
+	}
+	return r;
 }
 
 int rs400_suspend(struct radeon_device *rdev)

drivers/gpu/drm/radeon/rs600.c

@@ -876,6 +876,8 @@ static int rs600_startup(struct radeon_device *rdev)
 
 int rs600_resume(struct radeon_device *rdev)
 {
+	int r;
+
 	/* Make sur GART are not working */
 	rs600_gart_disable(rdev);
 	/* Resume clock before doing reset */
@@ -894,7 +896,11 @@ int rs600_resume(struct radeon_device *rdev)
 	radeon_surface_init(rdev);
 
 	rdev->accel_working = true;
-	return rs600_startup(rdev);
+	r = rs600_startup(rdev);
+	if (r) {
+		rdev->accel_working = false;
+	}
+	return r;
 }
 
 int rs600_suspend(struct radeon_device *rdev)

drivers/gpu/drm/radeon/rs690.c

@@ -659,6 +659,8 @@ static int rs690_startup(struct radeon_device *rdev)
 
 int rs690_resume(struct radeon_device *rdev)
 {
+	int r;
+
 	/* Make sur GART are not working */
 	rs400_gart_disable(rdev);
 	/* Resume clock before doing reset */
@@ -677,7 +679,11 @@ int rs690_resume(struct radeon_device *rdev)
 	radeon_surface_init(rdev);
 
 	rdev->accel_working = true;
-	return rs690_startup(rdev);
+	r = rs690_startup(rdev);
+	if (r) {
+		rdev->accel_working = false;
+	}
+	return r;
 }
 
 int rs690_suspend(struct radeon_device *rdev)

drivers/gpu/drm/radeon/rv515.c

@@ -424,6 +424,8 @@ static int rv515_startup(struct radeon_device *rdev)
 
 int rv515_resume(struct radeon_device *rdev)
 {
+	int r;
+
 	/* Make sur GART are not working */
 	if (rdev->flags & RADEON_IS_PCIE)
 		rv370_pcie_gart_disable(rdev);
@@ -443,7 +445,11 @@ int rv515_resume(struct radeon_device *rdev)
 	radeon_surface_init(rdev);
 
 	rdev->accel_working = true;
-	return rv515_startup(rdev);
+	r =  rv515_startup(rdev);
+	if (r) {
+		rdev->accel_working = false;
+	}
+	return r;
 }
 
 int rv515_suspend(struct radeon_device *rdev)

drivers/gpu/drm/radeon/rv770.c

@@ -1139,6 +1139,7 @@ int rv770_resume(struct radeon_device *rdev)
 	r = rv770_startup(rdev);
 	if (r) {
 		DRM_ERROR("r600 startup failed on resume\n");
+		rdev->accel_working = false;
 		return r;
 	}
 

drivers/hwmon/ads1015.c

@@ -271,7 +271,7 @@ static int ads1015_probe(struct i2c_client *client,
 			continue;
 		err = device_create_file(&client->dev, &ads1015_in[k].dev_attr);
 		if (err)
-			goto exit_free;
+			goto exit_remove;
 	}
 
 	data->hwmon_dev = hwmon_device_register(&client->dev);
@@ -285,7 +285,6 @@ static int ads1015_probe(struct i2c_client *client,
 exit_remove:
 	for (k = 0; k < ADS1015_CHANNELS; ++k)
 		device_remove_file(&client->dev, &ads1015_in[k].dev_attr);
-exit_free:
 	kfree(data);
 exit:
 	return err;

drivers/hwmon/f75375s.c

@@ -340,8 +340,6 @@ static int set_pwm_enable_direct(struct i2c_client *client, int nr, int val)
 			fanmode |= (1 << F75387_FAN_MANU_MODE(nr));
 			fanmode |= (1 << F75387_FAN_DUTY_MODE(nr));
 			data->pwm[nr] = 255;
-			f75375_write8(client, F75375_REG_FAN_PWM_DUTY(nr),
-					data->pwm[nr]);
 			break;
 		case 1: /* PWM */
 			fanmode  |= (1 << F75387_FAN_MANU_MODE(nr));
@@ -361,8 +359,6 @@ static int set_pwm_enable_direct(struct i2c_client *client, int nr, int val)
 		case 0: /* full speed */
 			fanmode  |= (3 << FAN_CTRL_MODE(nr));
 			data->pwm[nr] = 255;
-			f75375_write8(client, F75375_REG_FAN_PWM_DUTY(nr),
-					data->pwm[nr]);
 			break;
 		case 1: /* PWM */
 			fanmode  |= (3 << FAN_CTRL_MODE(nr));
@@ -377,6 +373,9 @@ static int set_pwm_enable_direct(struct i2c_client *client, int nr, int val)
 
 	f75375_write8(client, F75375_REG_FAN_TIMER, fanmode);
 	data->pwm_enable[nr] = val;
+	if (val == 0)
+		f75375_write8(client, F75375_REG_FAN_PWM_DUTY(nr),
+				data->pwm[nr]);
 	return 0;
 }
 

drivers/hwmon/max6639.c

@@ -72,8 +72,8 @@ static unsigned short normal_i2c[] = { 0x2c, 0x2e, 0x2f, I2C_CLIENT_END };
 
 static const int rpm_ranges[] = { 2000, 4000, 8000, 16000 };
 
-#define FAN_FROM_REG(val, div, rpm_range)	((val) == 0 ? -1 : \
-	(val) == 255 ? 0 : (rpm_ranges[rpm_range] * 30) / ((div + 1) * (val)))
+#define FAN_FROM_REG(val, rpm_range)	((val) == 0 || (val) == 255 ? \
+				0 : (rpm_ranges[rpm_range] * 30) / (val))
 #define TEMP_LIMIT_TO_REG(val)	SENSORS_LIMIT((val) / 1000, 0, 255)
 
 /*
@@ -333,7 +333,7 @@ static ssize_t show_fan_input(struct device *dev,
 		return PTR_ERR(data);
 
 	return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[attr->index],
-		       data->ppr, data->rpm_range));
+		       data->rpm_range));
 }
 
 static ssize_t show_alarm(struct device *dev,
@@ -429,9 +429,9 @@ static int max6639_init_client(struct i2c_client *client)
 	struct max6639_data *data = i2c_get_clientdata(client);
 	struct max6639_platform_data *max6639_info =
 		client->dev.platform_data;
-	int i = 0;
+	int i;
 	int rpm_range = 1; /* default: 4000 RPM */
-	int err = 0;
+	int err;
 
 	/* Reset chip to default values, see below for GCONFIG setup */
 	err = i2c_smbus_write_byte_data(client, MAX6639_REG_GCONFIG,
@@ -446,11 +446,6 @@ static int max6639_init_client(struct i2c_client *client)
 	else
 		data->ppr = 2;
 	data->ppr -= 1;
-	err = i2c_smbus_write_byte_data(client,
-			MAX6639_REG_FAN_PPR(i),
-			data->ppr << 5);
-	if (err)
-		goto exit;
 
 	if (max6639_info)
 		rpm_range = rpm_range_to_reg(max6639_info->rpm_range);
@@ -458,6 +453,13 @@ static int max6639_init_client(struct i2c_client *client)
 
 	for (i = 0; i < 2; i++) {
 
+		/* Set Fan pulse per revolution */
+		err = i2c_smbus_write_byte_data(client,
+				MAX6639_REG_FAN_PPR(i),
+				data->ppr << 6);
+		if (err)
+			goto exit;
+
 		/* Fans config PWM, RPM */
 		err = i2c_smbus_write_byte_data(client,
 			MAX6639_REG_FAN_CONFIG1(i),

drivers/hwmon/pmbus/max34440.c

@@ -82,7 +82,7 @@ static int max34440_write_word_data(struct i2c_client *client, int page,
 	case PMBUS_VIRT_RESET_TEMP_HISTORY:
 		ret = pmbus_write_word_data(client, page,
 					    MAX34440_MFR_TEMPERATURE_PEAK,
-					    0xffff);
+					    0x8000);
 		break;
 	default:
 		ret = -ENODATA;

drivers/media/radio/wl128x/Kconfig

@@ -4,8 +4,8 @@
 menu "Texas Instruments WL128x FM driver (ST based)"
 config RADIO_WL128X
 	tristate "Texas Instruments WL128x FM Radio"
-	depends on VIDEO_V4L2 && RFKILL
-	select TI_ST if NET && GPIOLIB
+	depends on VIDEO_V4L2 && RFKILL && GPIOLIB
+	select TI_ST if NET
 	help
 	Choose Y here if you have this FM radio chip.
 

drivers/media/rc/imon.c

@@ -47,7 +47,7 @@
 #define MOD_AUTHOR	"Jarod Wilson <jarod@wilsonet.com>"
 #define MOD_DESC	"Driver for SoundGraph iMON MultiMedia IR/Display"
 #define MOD_NAME	"imon"
-#define MOD_VERSION	"0.9.3"
+#define MOD_VERSION	"0.9.4"
 
 #define DISPLAY_MINOR_BASE	144
 #define DEVICE_NAME	"lcd%d"
@@ -1658,9 +1658,17 @@ static void usb_rx_callback_intf0(struct urb *urb)
 		return;
 
 	ictx = (struct imon_context *)urb->context;
-	if (!ictx || !ictx->dev_present_intf0)
+	if (!ictx)
 		return;
 
+	/*
+	 * if we get a callback before we're done configuring the hardware, we
+	 * can't yet process the data, as there's nowhere to send it, but we
+	 * still need to submit a new rx URB to avoid wedging the hardware
+	 */
+	if (!ictx->dev_present_intf0)
+		goto out;
+
 	switch (urb->status) {
 	case -ENOENT:		/* usbcore unlink successful! */
 		return;
@@ -1678,6 +1686,7 @@ static void usb_rx_callback_intf0(struct urb *urb)
 		break;
 	}
 
+out:
 	usb_submit_urb(ictx->rx_urb_intf0, GFP_ATOMIC);
 }
 
@@ -1690,9 +1699,17 @@ static void usb_rx_callback_intf1(struct urb *urb)
 		return;
 
 	ictx = (struct imon_context *)urb->context;
-	if (!ictx || !ictx->dev_present_intf1)
+	if (!ictx)
 		return;
 
+	/*
+	 * if we get a callback before we're done configuring the hardware, we
+	 * can't yet process the data, as there's nowhere to send it, but we
+	 * still need to submit a new rx URB to avoid wedging the hardware
+	 */
+	if (!ictx->dev_present_intf1)
+		goto out;
+
 	switch (urb->status) {
 	case -ENOENT:		/* usbcore unlink successful! */
 		return;
@@ -1710,6 +1727,7 @@ static void usb_rx_callback_intf1(struct urb *urb)
 		break;
 	}
 
+out:
 	usb_submit_urb(ictx->rx_urb_intf1, GFP_ATOMIC);
 }
 
@@ -2242,7 +2260,7 @@ find_endpoint_failed:
 	mutex_unlock(&ictx->lock);
 	usb_free_urb(rx_urb);
 rx_urb_alloc_failed:
-	dev_err(ictx->dev, "unable to initialize intf0, err %d\n", ret);
+	dev_err(ictx->dev, "unable to initialize intf1, err %d\n", ret);
 
 	return NULL;
 }

drivers/media/video/hdpvr/hdpvr-core.c

@@ -154,10 +154,20 @@ static int device_authorization(struct hdpvr_device *dev)
 	}
 #endif
 
+	dev->fw_ver = dev->usbc_buf[1];
+
 	v4l2_info(&dev->v4l2_dev, "firmware version 0x%x dated %s\n",
-			  dev->usbc_buf[1], &dev->usbc_buf[2]);
+			  dev->fw_ver, &dev->usbc_buf[2]);
+
+	if (dev->fw_ver > 0x15) {
+		dev->options.brightness	= 0x80;
+		dev->options.contrast	= 0x40;
+		dev->options.hue	= 0xf;
+		dev->options.saturation	= 0x40;
+		dev->options.sharpness	= 0x80;
+	}
 
-	switch (dev->usbc_buf[1]) {
+	switch (dev->fw_ver) {
 	case HDPVR_FIRMWARE_VERSION:
 		dev->flags &= ~HDPVR_FLAG_AC3_CAP;
 		break;
@@ -169,7 +179,7 @@ static int device_authorization(struct hdpvr_device *dev)
 	default:
 		v4l2_info(&dev->v4l2_dev, "untested firmware, the driver might"
 			  " not work.\n");
-		if (dev->usbc_buf[1] >= HDPVR_FIRMWARE_VERSION_AC3)
+		if (dev->fw_ver >= HDPVR_FIRMWARE_VERSION_AC3)
 			dev->flags |= HDPVR_FLAG_AC3_CAP;
 		else
 			dev->flags &= ~HDPVR_FLAG_AC3_CAP;
@@ -270,6 +280,8 @@ static const struct hdpvr_options hdpvr_default_options = {
 	.bitrate_mode	= HDPVR_CONSTANT,
 	.gop_mode	= HDPVR_SIMPLE_IDR_GOP,
 	.audio_codec	= V4L2_MPEG_AUDIO_ENCODING_AAC,
+	/* original picture controls for firmware version <= 0x15 */
+	/* updated in device_authorization() for newer firmware */
 	.brightness	= 0x86,
 	.contrast	= 0x80,
 	.hue		= 0x80,

drivers/media/video/hdpvr/hdpvr-video.c

@@ -283,12 +283,13 @@ static int hdpvr_start_streaming(struct hdpvr_device *dev)
 
 		hdpvr_config_call(dev, CTRL_START_STREAMING_VALUE, 0x00);
 
+		dev->status = STATUS_STREAMING;
+
 		INIT_WORK(&dev->worker, hdpvr_transmit_buffers);
 		queue_work(dev->workqueue, &dev->worker);
 
 		v4l2_dbg(MSG_BUFFER, hdpvr_debug, &dev->v4l2_dev,
 			 "streaming started\n");
-		dev->status = STATUS_STREAMING;
 
 		return 0;
 	}
@@ -722,21 +723,39 @@ static const s32 supported_v4l2_ctrls[] = {
 };
 
 static int fill_queryctrl(struct hdpvr_options *opt, struct v4l2_queryctrl *qc,
-			  int ac3)
+			  int ac3, int fw_ver)
 {
 	int err;
 
+	if (fw_ver > 0x15) {
+		switch (qc->id) {
+		case V4L2_CID_BRIGHTNESS:
+			return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x80);
+		case V4L2_CID_CONTRAST:
+			return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x40);
+		case V4L2_CID_SATURATION:
+			return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x40);
+		case V4L2_CID_HUE:
+			return v4l2_ctrl_query_fill(qc, 0x0, 0x1e, 1, 0xf);
+		case V4L2_CID_SHARPNESS:
+			return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x80);
+		}
+	} else {
+		switch (qc->id) {
+		case V4L2_CID_BRIGHTNESS:
+			return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x86);
+		case V4L2_CID_CONTRAST:
+			return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x80);
+		case V4L2_CID_SATURATION:
+			return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x80);
+		case V4L2_CID_HUE:
+			return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x80);
+		case V4L2_CID_SHARPNESS:
+			return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x80);
+		}
+	}
+
 	switch (qc->id) {
-	case V4L2_CID_BRIGHTNESS:
-		return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x86);
-	case V4L2_CID_CONTRAST:
-		return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x80);
-	case V4L2_CID_SATURATION:
-		return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x80);
-	case V4L2_CID_HUE:
-		return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x80);
-	case V4L2_CID_SHARPNESS:
-		return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x80);
 	case V4L2_CID_MPEG_AUDIO_ENCODING:
 		return v4l2_ctrl_query_fill(
 			qc, V4L2_MPEG_AUDIO_ENCODING_AAC,
@@ -794,7 +813,8 @@ static int vidioc_queryctrl(struct file *file, void *private_data,
 
 		if (qc->id == supported_v4l2_ctrls[i])
 			return fill_queryctrl(&dev->options, qc,
-					      dev->flags & HDPVR_FLAG_AC3_CAP);
+					      dev->flags & HDPVR_FLAG_AC3_CAP,
+					      dev->fw_ver);
 
 		if (qc->id < supported_v4l2_ctrls[i])
 			break;

drivers/media/video/hdpvr/hdpvr.h

@@ -113,6 +113,7 @@ struct hdpvr_device {
 	/* usb control transfer buffer and lock */
 	struct mutex		usbc_mutex;
 	u8			*usbc_buf;
+	u8			fw_ver;
 };
 
 static inline struct hdpvr_device *to_hdpvr_dev(struct v4l2_device *v4l2_dev)

drivers/media/video/omap3isp/ispccdc.c

@@ -1407,7 +1407,7 @@ static int __ccdc_handle_stopping(struct isp_ccdc_device *ccdc, u32 event)
 static void ccdc_hs_vs_isr(struct isp_ccdc_device *ccdc)
 {
 	struct isp_pipeline *pipe = to_isp_pipeline(&ccdc->subdev.entity);
-	struct video_device *vdev = &ccdc->subdev.devnode;
+	struct video_device *vdev = ccdc->subdev.devnode;
 	struct v4l2_event event;
 
 	memset(&event, 0, sizeof(event));

drivers/net/can/sja1000/sja1000.c

@@ -95,11 +95,16 @@ static void sja1000_write_cmdreg(struct sja1000_priv *priv, u8 val)
 	spin_unlock_irqrestore(&priv->cmdreg_lock, flags);
 }
 
+static int sja1000_is_absent(struct sja1000_priv *priv)
+{
+	return (priv->read_reg(priv, REG_MOD) == 0xFF);
+}
+
 static int sja1000_probe_chip(struct net_device *dev)
 {
 	struct sja1000_priv *priv = netdev_priv(dev);
 
-	if (priv->reg_base && (priv->read_reg(priv, 0) == 0xFF)) {
+	if (priv->reg_base && sja1000_is_absent(priv)) {
 		printk(KERN_INFO "%s: probing @0x%lX failed\n",
 		       DRV_NAME, dev->base_addr);
 		return 0;
@@ -493,6 +498,9 @@ irqreturn_t sja1000_interrupt(int irq, void *dev_id)
 	while ((isrc = priv->read_reg(priv, REG_IR)) && (n < SJA1000_MAX_IRQ)) {
 		n++;
 		status = priv->read_reg(priv, REG_SR);
+		/* check for absent controller due to hw unplug */
+		if (status == 0xFF && sja1000_is_absent(priv))
+			return IRQ_NONE;
 
 		if (isrc & IRQ_WUI)
 			dev_warn(dev->dev.parent, "wakeup interrupt\n");
@@ -509,6 +517,9 @@ irqreturn_t sja1000_interrupt(int irq, void *dev_id)
 			while (status & SR_RBS) {
 				sja1000_rx(dev);
 				status = priv->read_reg(priv, REG_SR);
+				/* check for absent controller */
+				if (status == 0xFF && sja1000_is_absent(priv))
+					return IRQ_NONE;
 			}
 		}
 		if (isrc & (IRQ_DOI | IRQ_EI | IRQ_BEI | IRQ_EPI | IRQ_ALI)) {

drivers/net/ethernet/atheros/atl1c/atl1c_main.c

@@ -2244,10 +2244,6 @@ static netdev_tx_t atl1c_xmit_frame(struct sk_buff *skb,
 			dev_info(&adapter->pdev->dev, "tx locked\n");
 		return NETDEV_TX_LOCKED;
 	}
-	if (skb->mark == 0x01)
-		type = atl1c_trans_high;
-	else
-		type = atl1c_trans_normal;
 
 	if (atl1c_tpd_avail(adapter, type) < tpd_req) {
 		/* no enough descriptor, just stop queue */

drivers/net/ethernet/broadcom/b44.c

@@ -2339,7 +2339,7 @@ static inline int __init b44_pci_init(void)
 	return err;
 }
 
-static inline void __exit b44_pci_exit(void)
+static inline void b44_pci_exit(void)
 {
 #ifdef CONFIG_B44_PCI
 	ssb_pcihost_unregister(&b44_pci_driver);

drivers/net/ethernet/broadcom/cnic.c

@@ -3584,7 +3584,11 @@ static int cnic_get_v6_route(struct sockaddr_in6 *dst_addr,
 		fl6.flowi6_oif = dst_addr->sin6_scope_id;
 
 	*dst = ip6_route_output(&init_net, NULL, &fl6);
-	if (*dst)
+	if ((*dst)->error) {
+		dst_release(*dst);
+		*dst = NULL;
+		return -ENETUNREACH;
+	} else
 		return 0;
 #endif
 

drivers/net/ethernet/cisco/enic/cq_enet_desc.h

@@ -157,7 +157,7 @@ static inline void cq_enet_rq_desc_dec(struct cq_enet_rq_desc *desc,
 			CQ_ENET_RQ_DESC_FCOE_FC_CRC_OK) ? 1 : 0;
 		*fcoe_enc_error = (desc->flags &
 			CQ_ENET_RQ_DESC_FCOE_ENC_ERROR) ? 1 : 0;
-		*fcoe_eof = (u8)((desc->checksum_fcoe >>
+		*fcoe_eof = (u8)((le16_to_cpu(desc->checksum_fcoe) >>
 			CQ_ENET_RQ_DESC_FCOE_EOF_SHIFT) &
 			CQ_ENET_RQ_DESC_FCOE_EOF_MASK);
 		*checksum = 0;

drivers/net/ethernet/cisco/enic/enic_pp.c

@@ -72,7 +72,7 @@ static int enic_set_port_profile(struct enic *enic, int vf)
 	struct enic_port_profile *pp;
 	struct vic_provinfo *vp;
 	const u8 oui[3] = VIC_PROVINFO_CISCO_OUI;
-	const u16 os_type = htons(VIC_GENERIC_PROV_OS_TYPE_LINUX);
+	const __be16 os_type = htons(VIC_GENERIC_PROV_OS_TYPE_LINUX);
 	char uuid_str[38];
 	char client_mac_str[18];
 	u8 *client_mac;

drivers/net/ethernet/jme.c

@@ -2328,19 +2328,11 @@ jme_change_mtu(struct net_device *netdev, int new_mtu)
 		((new_mtu) < IPV6_MIN_MTU))
 		return -EINVAL;
 
-	if (new_mtu > 4000) {
-		jme->reg_rxcs &= ~RXCS_FIFOTHNP;
-		jme->reg_rxcs |= RXCS_FIFOTHNP_64QW;
-		jme_restart_rx_engine(jme);
-	} else {
-		jme->reg_rxcs &= ~RXCS_FIFOTHNP;
-		jme->reg_rxcs |= RXCS_FIFOTHNP_128QW;
-		jme_restart_rx_engine(jme);
-	}
 
 	netdev->mtu = new_mtu;
 	netdev_update_features(netdev);
 
+	jme_restart_rx_engine(jme);
 	jme_reset_link(jme);
 
 	return 0;

drivers/net/ethernet/jme.h

@@ -730,7 +730,7 @@ enum jme_rxcs_values {
 	RXCS_RETRYCNT_60	= 0x00000F00,
 
 	RXCS_DEFAULT		= RXCS_FIFOTHTP_128T |
-				  RXCS_FIFOTHNP_128QW |
+				  RXCS_FIFOTHNP_16QW |
 				  RXCS_DMAREQSZ_128B |
 				  RXCS_RETRYGAP_256ns |
 				  RXCS_RETRYCNT_32,

drivers/net/ethernet/mellanox/mlx4/eq.c

@@ -1036,7 +1036,7 @@ int mlx4_assign_eq(struct mlx4_dev *dev, char* name, int * vector)
 	struct mlx4_priv *priv = mlx4_priv(dev);
 	int vec = 0, err = 0, i;
 
-	spin_lock(&priv->msix_ctl.pool_lock);
+	mutex_lock(&priv->msix_ctl.pool_lock);
 	for (i = 0; !vec && i < dev->caps.comp_pool; i++) {
 		if (~priv->msix_ctl.pool_bm & 1ULL << i) {
 			priv->msix_ctl.pool_bm |= 1ULL << i;
@@ -1058,7 +1058,7 @@ int mlx4_assign_eq(struct mlx4_dev *dev, char* name, int * vector)
 			eq_set_ci(&priv->eq_table.eq[vec], 1);
 		}
 	}
-	spin_unlock(&priv->msix_ctl.pool_lock);
+	mutex_unlock(&priv->msix_ctl.pool_lock);
 
 	if (vec) {
 		*vector = vec;
@@ -1079,13 +1079,13 @@ void mlx4_release_eq(struct mlx4_dev *dev, int vec)
 	if (likely(i >= 0)) {
 		/*sanity check , making sure were not trying to free irq's
 		  Belonging to a legacy EQ*/
-		spin_lock(&priv->msix_ctl.pool_lock);
+		mutex_lock(&priv->msix_ctl.pool_lock);
 		if (priv->msix_ctl.pool_bm & 1ULL << i) {
 			free_irq(priv->eq_table.eq[vec].irq,
 				 &priv->eq_table.eq[vec]);
 			priv->msix_ctl.pool_bm &= ~(1ULL << i);
 		}
-		spin_unlock(&priv->msix_ctl.pool_lock);
+		mutex_unlock(&priv->msix_ctl.pool_lock);
 	}
 
 }

drivers/net/ethernet/mellanox/mlx4/fw.c

@@ -685,7 +685,7 @@ int mlx4_QUERY_PORT_wrapper(struct mlx4_dev *dev, int slave,
 	return err;
 }
 
-static int mlx4_QUERY_PORT(struct mlx4_dev *dev, void *ptr, u8 port)
+int mlx4_QUERY_PORT(struct mlx4_dev *dev, void *ptr, u8 port)
 {
 	struct mlx4_cmd_mailbox *outbox = ptr;
 

drivers/net/ethernet/mellanox/mlx4/main.c

@@ -531,15 +531,14 @@ int mlx4_change_port_types(struct mlx4_dev *dev,
 	for (port = 0; port <  dev->caps.num_ports; port++) {
 		/* Change the port type only if the new type is different
 		 * from the current, and not set to Auto */
-		if (port_types[port] != dev->caps.port_type[port + 1]) {
+		if (port_types[port] != dev->caps.port_type[port + 1])
 			change = 1;
-			dev->caps.port_type[port + 1] = port_types[port];
-		}
 	}
 	if (change) {
 		mlx4_unregister_device(dev);
 		for (port = 1; port <= dev->caps.num_ports; port++) {
 			mlx4_CLOSE_PORT(dev, port);
+			dev->caps.port_type[port] = port_types[port - 1];
 			err = mlx4_SET_PORT(dev, port);
 			if (err) {
 				mlx4_err(dev, "Failed to set port %d, "
@@ -986,6 +985,9 @@ static int map_bf_area(struct mlx4_dev *dev)
 	resource_size_t bf_len;
 	int err = 0;
 
+	if (!dev->caps.bf_reg_size)
+		return -ENXIO;
+
 	bf_start = pci_resource_start(dev->pdev, 2) +
 			(dev->caps.num_uars << PAGE_SHIFT);
 	bf_len = pci_resource_len(dev->pdev, 2) -
@@ -1825,7 +1827,7 @@ slave_start:
 		goto err_master_mfunc;
 
 	priv->msix_ctl.pool_bm = 0;
-	spin_lock_init(&priv->msix_ctl.pool_lock);
+	mutex_init(&priv->msix_ctl.pool_lock);
 
 	mlx4_enable_msi_x(dev);
 	if ((mlx4_is_mfunc(dev)) &&

drivers/net/ethernet/mellanox/mlx4/mlx4.h

@@ -697,7 +697,7 @@ struct mlx4_sense {
 
 struct mlx4_msix_ctl {
 	u64		pool_bm;
-	spinlock_t	pool_lock;
+	struct mutex	pool_lock;
 };
 
 struct mlx4_steer {

drivers/net/ethernet/mellanox/mlx4/mr.c

@@ -304,7 +304,7 @@ static int mlx4_HW2SW_MPT(struct mlx4_dev *dev, struct mlx4_cmd_mailbox *mailbox
 			    MLX4_CMD_TIME_CLASS_B, MLX4_CMD_WRAPPED);
 }
 
-static int mlx4_mr_reserve_range(struct mlx4_dev *dev, int cnt, int align,
+int mlx4_mr_reserve_range(struct mlx4_dev *dev, int cnt, int align,
 			  u32 *base_mridx)
 {
 	struct mlx4_priv *priv = mlx4_priv(dev);
@@ -320,14 +320,14 @@ static int mlx4_mr_reserve_range(struct mlx4_dev *dev, int cnt, int align,
 }
 EXPORT_SYMBOL_GPL(mlx4_mr_reserve_range);
 
-static void mlx4_mr_release_range(struct mlx4_dev *dev, u32 base_mridx, int cnt)
+void mlx4_mr_release_range(struct mlx4_dev *dev, u32 base_mridx, int cnt)
 {
 	struct mlx4_priv *priv = mlx4_priv(dev);
 	mlx4_bitmap_free_range(&priv->mr_table.mpt_bitmap, base_mridx, cnt);
 }
 EXPORT_SYMBOL_GPL(mlx4_mr_release_range);
 
-static int mlx4_mr_alloc_reserved(struct mlx4_dev *dev, u32 mridx, u32 pd,
+int mlx4_mr_alloc_reserved(struct mlx4_dev *dev, u32 mridx, u32 pd,
 			   u64 iova, u64 size, u32 access, int npages,
 			   int page_shift, struct mlx4_mr *mr)
 {
@@ -457,7 +457,7 @@ int mlx4_mr_alloc(struct mlx4_dev *dev, u32 pd, u64 iova, u64 size, u32 access,
 }
 EXPORT_SYMBOL_GPL(mlx4_mr_alloc);
 
-static void mlx4_mr_free_reserved(struct mlx4_dev *dev, struct mlx4_mr *mr)
+void mlx4_mr_free_reserved(struct mlx4_dev *dev, struct mlx4_mr *mr)
 {
 	int err;
 
@@ -852,7 +852,7 @@ err_free:
 }
 EXPORT_SYMBOL_GPL(mlx4_fmr_alloc);
 
-static int mlx4_fmr_alloc_reserved(struct mlx4_dev *dev, u32 mridx,
+int mlx4_fmr_alloc_reserved(struct mlx4_dev *dev, u32 mridx,
 			    u32 pd, u32 access, int max_pages,
 			    int max_maps, u8 page_shift, struct mlx4_fmr *fmr)
 {
@@ -954,7 +954,7 @@ int mlx4_fmr_free(struct mlx4_dev *dev, struct mlx4_fmr *fmr)
 }
 EXPORT_SYMBOL_GPL(mlx4_fmr_free);
 
-static int mlx4_fmr_free_reserved(struct mlx4_dev *dev, struct mlx4_fmr *fmr)
+int mlx4_fmr_free_reserved(struct mlx4_dev *dev, struct mlx4_fmr *fmr)
 {
 	if (fmr->maps)
 		return -EBUSY;