Merge branch 'pci/hotplug'

  - fix use-before-set error in ibmphp (Dan Carpenter)

  - fix pciehp timeouts caused by Command Completed errata (Bjorn Helgaas)

  - fix refcounting in pnv_php hotplug (Julia Lawall)

  - clear pciehp Presence Detect and Data Link Layer Status Changed on
    resume so we don't miss hotplug events (Mika Westerberg)

  - only request pciehp control if we support it, so platform can use ACPI
    hotplug otherwise (Mika Westerberg)

  - convert SHPC to be builtin only (Mika Westerberg)

  - request SHPC control via _OSC if we support it (Mika Westerberg)

  - simplify SHPC handoff from firmware (Mika Westerberg)

* pci/hotplug:
  PCI: Improve "partially hidden behind bridge" log message
  PCI: Improve pci_scan_bridge() and pci_scan_bridge_extend() doc
  PCI: Move resource distribution for single bridge outside loop
  PCI: Account for all bridges on bus when distributing bus numbers
  ACPI / hotplug / PCI: Drop unnecessary parentheses
  ACPI / hotplug / PCI: Mark stale PCI devices disconnected
  ACPI / hotplug / PCI: Don't scan bridges managed by native hotplug
  PCI: hotplug: Add hotplug_is_native()
  PCI: shpchp: Add shpchp_is_native()
  PCI: shpchp: Fix AMD POGO identification
  PCI: shpchp: Use dev_printk() for OSHP-related messages
  PCI: shpchp: Remove get_hp_hw_control_from_firmware() wrapper
  PCI: shpchp: Remove acpi_get_hp_hw_control_from_firmware() flags
  PCI: shpchp: Rely on previous _OSC results
  PCI: shpchp: Request SHPC control via _OSC when adding host bridge
  PCI: shpchp: Convert SHPC to be builtin only
  PCI: pciehp: Make pciehp_is_native() stricter
  PCI: pciehp: Rename host->native_hotplug to host->native_pcie_hotplug
  PCI: pciehp: Request control of native hotplug only if supported
  PCI: pciehp: Clear Presence Detect and Data Link Layer Status Changed on resume
  PCI: pnv_php: Add missing of_node_put()
  PCI: pciehp: Add quirk for Command Completed errata
  PCI: Add Qualcomm vendor ID
  PCI: ibmphp: Fix use-before-set in get_max_bus_speed()

# Conflicts:
#	drivers/acpi/pci_root.c

drivers/acpi/pci_root.c

@@ -473,12 +473,17 @@ static void negotiate_os_control(struct acpi_pci_root *root, int *no_aspm)
 	}
 
 	control = OSC_PCI_EXPRESS_CAPABILITY_CONTROL
-		| OSC_PCI_EXPRESS_NATIVE_HP_CONTROL
 		| OSC_PCI_EXPRESS_PME_CONTROL;
 
 	if (IS_ENABLED(CONFIG_PCIEASPM))
 		control |= OSC_PCI_EXPRESS_LTR_CONTROL;
 
+	if (IS_ENABLED(CONFIG_HOTPLUG_PCI_PCIE))
+		control |= OSC_PCI_EXPRESS_NATIVE_HP_CONTROL;
+
+	if (IS_ENABLED(CONFIG_HOTPLUG_PCI_SHPC))
+		control |= OSC_PCI_SHPC_NATIVE_HP_CONTROL;
+
 	if (pci_aer_available()) {
 		if (aer_acpi_firmware_first())
 			dev_info(&device->dev,
@@ -904,7 +909,9 @@ struct pci_bus *acpi_pci_root_create(struct acpi_pci_root *root,
 
 	host_bridge = to_pci_host_bridge(bus->bridge);
 	if (!(root->osc_control_set & OSC_PCI_EXPRESS_NATIVE_HP_CONTROL))
-		host_bridge->native_hotplug = 0;
+		host_bridge->native_pcie_hotplug = 0;
+	if (!(root->osc_control_set & OSC_PCI_SHPC_NATIVE_HP_CONTROL))
+		host_bridge->native_shpc_hotplug = 0;
 	if (!(root->osc_control_set & OSC_PCI_EXPRESS_AER_CONTROL))
 		host_bridge->native_aer = 0;
 	if (!(root->osc_control_set & OSC_PCI_EXPRESS_PME_CONTROL))

drivers/pci/hotplug/Kconfig

@@ -104,14 +104,11 @@ config HOTPLUG_PCI_CPCI_GENERIC
 	  When in doubt, say N.
 
 config HOTPLUG_PCI_SHPC
-	tristate "SHPC PCI Hotplug driver"
+	bool "SHPC PCI Hotplug driver"
 	help
 	  Say Y here if you have a motherboard with a SHPC PCI Hotplug
 	  controller.
 
-	  To compile this driver as a module, choose M here: the
-	  module will be called shpchp.
-
 	  When in doubt, say N.
 
 config HOTPLUG_PCI_POWERNV

drivers/pci/hotplug/acpi_pcihp.c

@@ -63,22 +63,17 @@ static acpi_status acpi_run_oshp(acpi_handle handle)
 /**
  * acpi_get_hp_hw_control_from_firmware
  * @dev: the pci_dev of the bridge that has a hotplug controller
- * @flags: requested control bits for _OSC
  *
  * Attempt to take hotplug control from firmware.
  */
-int acpi_get_hp_hw_control_from_firmware(struct pci_dev *pdev, u32 flags)
+int acpi_get_hp_hw_control_from_firmware(struct pci_dev *pdev)
 {
+	const struct pci_host_bridge *host;
+	const struct acpi_pci_root *root;
 	acpi_status status;
 	acpi_handle chandle, handle;
 	struct acpi_buffer string = { ACPI_ALLOCATE_BUFFER, NULL };
 
-	flags &= OSC_PCI_SHPC_NATIVE_HP_CONTROL;
-	if (!flags) {
-		err("Invalid flags %u specified!\n", flags);
-		return -EINVAL;
-	}
-
 	/*
 	 * Per PCI firmware specification, we should run the ACPI _OSC
 	 * method to get control of hotplug hardware before using it. If
@@ -88,25 +83,20 @@ int acpi_get_hp_hw_control_from_firmware(struct pci_dev *pdev, u32 flags)
 	 * OSHP within the scope of the hotplug controller and its parents,
 	 * up to the host bridge under which this controller exists.
 	 */
-	handle = acpi_find_root_bridge_handle(pdev);
-	if (handle) {
-		acpi_get_name(handle, ACPI_FULL_PATHNAME, &string);
-		dbg("Trying to get hotplug control for %s\n",
-				(char *)string.pointer);
-		status = acpi_pci_osc_control_set(handle, &flags, flags);
-		if (ACPI_SUCCESS(status))
-			goto got_one;
-		if (status == AE_SUPPORT)
-			goto no_control;
-		kfree(string.pointer);
-		string = (struct acpi_buffer){ ACPI_ALLOCATE_BUFFER, NULL };
-	}
+	if (shpchp_is_native(pdev))
+		return 0;
+
+	/* If _OSC exists, we should not evaluate OSHP */
+	host = pci_find_host_bridge(pdev->bus);
+	root = acpi_pci_find_root(ACPI_HANDLE(&host->dev));
+	if (root->osc_support_set)
+		goto no_control;
 
 	handle = ACPI_HANDLE(&pdev->dev);
 	if (!handle) {
 		/*
 		 * This hotplug controller was not listed in the ACPI name
-		 * space at all. Try to get acpi handle of parent pci bus.
+		 * space at all. Try to get ACPI handle of parent PCI bus.
 		 */
 		struct pci_bus *pbus;
 		for (pbus = pdev->bus; pbus; pbus = pbus->parent) {
@@ -118,8 +108,8 @@ int acpi_get_hp_hw_control_from_firmware(struct pci_dev *pdev, u32 flags)
 
 	while (handle) {
 		acpi_get_name(handle, ACPI_FULL_PATHNAME, &string);
-		dbg("Trying to get hotplug control for %s\n",
-		    (char *)string.pointer);
+		pci_info(pdev, "Requesting control of SHPC hotplug via OSHP (%s)\n",
+			 (char *)string.pointer);
 		status = acpi_run_oshp(handle);
 		if (ACPI_SUCCESS(status))
 			goto got_one;
@@ -131,13 +121,12 @@ int acpi_get_hp_hw_control_from_firmware(struct pci_dev *pdev, u32 flags)
 			break;
 	}
 no_control:
-	dbg("Cannot get control of hotplug hardware for pci %s\n",
-	    pci_name(pdev));
+	pci_info(pdev, "Cannot get control of SHPC hotplug\n");
 	kfree(string.pointer);
 	return -ENODEV;
 got_one:
-	dbg("Gained control for hotplug HW for pci %s (%s)\n",
-	    pci_name(pdev), (char *)string.pointer);
+	pci_info(pdev, "Gained control of SHPC hotplug (%s)\n",
+		 (char *)string.pointer);
 	kfree(string.pointer);
 	return 0;
 }

drivers/pci/hotplug/acpiphp_glue.c

@@ -287,11 +287,12 @@ static acpi_status acpiphp_add_context(acpi_handle handle, u32 lvl, void *data,
 	/*
 	 * Expose slots to user space for functions that have _EJ0 or _RMV or
 	 * are located in dock stations.  Do not expose them for devices handled
-	 * by the native PCIe hotplug (PCIeHP), becuase that code is supposed to
-	 * expose slots to user space in those cases.
+	 * by the native PCIe hotplug (PCIeHP) or standard PCI hotplug
+	 * (SHPCHP), because that code is supposed to expose slots to user
+	 * space in those cases.
 	 */
 	if ((acpi_pci_check_ejectable(pbus, handle) || is_dock_device(adev))
-	    && !(pdev && pdev->is_hotplug_bridge && pciehp_is_native(pdev))) {
+	    && !(pdev && hotplug_is_native(pdev))) {
 		unsigned long long sun;
 		int retval;
 
@@ -430,6 +431,29 @@ static int acpiphp_rescan_slot(struct acpiphp_slot *slot)
 	return pci_scan_slot(slot->bus, PCI_DEVFN(slot->device, 0));
 }
 
+static void acpiphp_native_scan_bridge(struct pci_dev *bridge)
+{
+	struct pci_bus *bus = bridge->subordinate;
+	struct pci_dev *dev;
+	int max;
+
+	if (!bus)
+		return;
+
+	max = bus->busn_res.start;
+	/* Scan already configured non-hotplug bridges */
+	for_each_pci_bridge(dev, bus) {
+		if (!hotplug_is_native(dev))
+			max = pci_scan_bridge(bus, dev, max, 0);
+	}
+
+	/* Scan non-hotplug bridges that need to be reconfigured */
+	for_each_pci_bridge(dev, bus) {
+		if (!hotplug_is_native(dev))
+			max = pci_scan_bridge(bus, dev, max, 1);
+	}
+}
+
 /**
  * enable_slot - enable, configure a slot
  * @slot: slot to be enabled
@@ -442,25 +466,42 @@ static void enable_slot(struct acpiphp_slot *slot)
 	struct pci_dev *dev;
 	struct pci_bus *bus = slot->bus;
 	struct acpiphp_func *func;
-	int max, pass;
-	LIST_HEAD(add_list);
 
-	acpiphp_rescan_slot(slot);
-	max = acpiphp_max_busnr(bus);
-	for (pass = 0; pass < 2; pass++) {
+	if (bus->self && hotplug_is_native(bus->self)) {
+		/*
+		 * If native hotplug is used, it will take care of hotplug
+		 * slot management and resource allocation for hotplug
+		 * bridges. However, ACPI hotplug may still be used for
+		 * non-hotplug bridges to bring in additional devices such
+		 * as a Thunderbolt host controller.
+		 */
 		for_each_pci_bridge(dev, bus) {
-			if (PCI_SLOT(dev->devfn) != slot->device)
-				continue;
-
-			max = pci_scan_bridge(bus, dev, max, pass);
-			if (pass && dev->subordinate) {
-				check_hotplug_bridge(slot, dev);
-				pcibios_resource_survey_bus(dev->subordinate);
-				__pci_bus_size_bridges(dev->subordinate, &add_list);
+			if (PCI_SLOT(dev->devfn) == slot->device)
+				acpiphp_native_scan_bridge(dev);
+		}
+		pci_assign_unassigned_bridge_resources(bus->self);
+	} else {
+		LIST_HEAD(add_list);
+		int max, pass;
+
+		acpiphp_rescan_slot(slot);
+		max = acpiphp_max_busnr(bus);
+		for (pass = 0; pass < 2; pass++) {
+			for_each_pci_bridge(dev, bus) {
+				if (PCI_SLOT(dev->devfn) != slot->device)
+					continue;
+
+				max = pci_scan_bridge(bus, dev, max, pass);
+				if (pass && dev->subordinate) {
+					check_hotplug_bridge(slot, dev);
+					pcibios_resource_survey_bus(dev->subordinate);
+					__pci_bus_size_bridges(dev->subordinate,
+							       &add_list);
+				}
 			}
 		}
+		__pci_bus_assign_resources(bus, &add_list, NULL);
 	}
-	__pci_bus_assign_resources(bus, &add_list, NULL);
 
 	acpiphp_sanitize_bus(bus);
 	pcie_bus_configure_settings(bus);
@@ -481,7 +522,7 @@ static void enable_slot(struct acpiphp_slot *slot)
 		if (!dev) {
 			/* Do not set SLOT_ENABLED flag if some funcs
 			   are not added. */
-			slot->flags &= (~SLOT_ENABLED);
+			slot->flags &= ~SLOT_ENABLED;
 			continue;
 		}
 	}
@@ -510,7 +551,7 @@ static void disable_slot(struct acpiphp_slot *slot)
 	list_for_each_entry(func, &slot->funcs, sibling)
 		acpi_bus_trim(func_to_acpi_device(func));
 
-	slot->flags &= (~SLOT_ENABLED);
+	slot->flags &= ~SLOT_ENABLED;
 }
 
 static bool slot_no_hotplug(struct acpiphp_slot *slot)
@@ -608,6 +649,11 @@ static void trim_stale_devices(struct pci_dev *dev)
 		alive = pci_device_is_present(dev);
 
 	if (!alive) {
+		pci_dev_set_disconnected(dev, NULL);
+		if (pci_has_subordinate(dev))
+			pci_walk_bus(dev->subordinate, pci_dev_set_disconnected,
+				     NULL);
+
 		pci_stop_and_remove_bus_device(dev);
 		if (adev)
 			acpi_bus_trim(adev);

drivers/pci/hotplug/ibmphp_core.c

@@ -379,7 +379,7 @@ static int get_adapter_present(struct hotplug_slot *hotplug_slot, u8 *value)
 
 static int get_max_bus_speed(struct slot *slot)
 {
-	int rc;
+	int rc = 0;
 	u8 mode = 0;
 	enum pci_bus_speed speed;
 	struct pci_bus *bus = slot->hotplug_slot->pci_slot->bus;

drivers/pci/hotplug/pciehp.h

@@ -121,7 +121,7 @@ struct controller *pcie_init(struct pcie_device *dev);
 int pcie_init_notification(struct controller *ctrl);
 int pciehp_enable_slot(struct slot *p_slot);
 int pciehp_disable_slot(struct slot *p_slot);
-void pcie_enable_notification(struct controller *ctrl);
+void pcie_reenable_notification(struct controller *ctrl);
 int pciehp_power_on_slot(struct slot *slot);
 void pciehp_power_off_slot(struct slot *slot);
 void pciehp_get_power_status(struct slot *slot, u8 *status);

drivers/pci/hotplug/pciehp_core.c

@@ -283,7 +283,7 @@ static int pciehp_resume(struct pcie_device *dev)
 	ctrl = get_service_data(dev);
 
 	/* reinitialize the chipset's event detection logic */
-	pcie_enable_notification(ctrl);
+	pcie_reenable_notification(ctrl);
 
 	slot = ctrl->slot;
 

drivers/pci/hotplug/pciehp_hpc.c

@@ -10,7 +10,6 @@
  * All rights reserved.
  *
  * Send feedback to <greg@kroah.com>,<kristen.c.accardi@intel.com>
- *
  */
 
 #include <linux/kernel.h>
@@ -147,25 +146,22 @@ static void pcie_wait_cmd(struct controller *ctrl)
 	else
 		rc = pcie_poll_cmd(ctrl, jiffies_to_msecs(timeout));
 
-	/*
-	 * Controllers with errata like Intel CF118 don't generate
-	 * completion notifications unless the power/indicator/interlock
-	 * control bits are changed.  On such controllers, we'll emit this
-	 * timeout message when we wait for completion of commands that
-	 * don't change those bits, e.g., commands that merely enable
-	 * interrupts.
-	 */
 	if (!rc)
 		ctrl_info(ctrl, "Timeout on hotplug command %#06x (issued %u msec ago)\n",
 			  ctrl->slot_ctrl,
 			  jiffies_to_msecs(jiffies - ctrl->cmd_started));
 }
 
+#define CC_ERRATUM_MASK		(PCI_EXP_SLTCTL_PCC |	\
+				 PCI_EXP_SLTCTL_PIC |	\
+				 PCI_EXP_SLTCTL_AIC |	\
+				 PCI_EXP_SLTCTL_EIC)
+
 static void pcie_do_write_cmd(struct controller *ctrl, u16 cmd,
 			      u16 mask, bool wait)
 {
 	struct pci_dev *pdev = ctrl_dev(ctrl);
-	u16 slot_ctrl;
+	u16 slot_ctrl_orig, slot_ctrl;
 
 	mutex_lock(&ctrl->ctrl_lock);
 
@@ -180,6 +176,7 @@ static void pcie_do_write_cmd(struct controller *ctrl, u16 cmd,
 		goto out;
 	}
 
+	slot_ctrl_orig = slot_ctrl;
 	slot_ctrl &= ~mask;
 	slot_ctrl |= (cmd & mask);
 	ctrl->cmd_busy = 1;
@@ -188,6 +185,17 @@ static void pcie_do_write_cmd(struct controller *ctrl, u16 cmd,
 	ctrl->cmd_started = jiffies;
 	ctrl->slot_ctrl = slot_ctrl;
 
+	/*
+	 * Controllers with the Intel CF118 and similar errata advertise
+	 * Command Completed support, but they only set Command Completed
+	 * if we change the "Control" bits for power, power indicator,
+	 * attention indicator, or interlock.  If we only change the
+	 * "Enable" bits, they never set the Command Completed bit.
+	 */
+	if (pdev->broken_cmd_compl &&
+	    (slot_ctrl_orig & CC_ERRATUM_MASK) == (slot_ctrl & CC_ERRATUM_MASK))
+		ctrl->cmd_busy = 0;
+
 	/*
 	 * Optionally wait for the hardware to be ready for a new command,
 	 * indicating completion of the above issued command.
@@ -645,7 +653,7 @@ static irqreturn_t pcie_isr(int irq, void *dev_id)
 	return handled;
 }
 
-void pcie_enable_notification(struct controller *ctrl)
+static void pcie_enable_notification(struct controller *ctrl)
 {
 	u16 cmd, mask;
 
@@ -683,6 +691,17 @@ void pcie_enable_notification(struct controller *ctrl)
 		 pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL, cmd);
 }
 
+void pcie_reenable_notification(struct controller *ctrl)
+{
+	/*
+	 * Clear both Presence and Data Link Layer Changed to make sure
+	 * those events still fire after we have re-enabled them.
+	 */
+	pcie_capability_write_word(ctrl->pcie->port, PCI_EXP_SLTSTA,
+				   PCI_EXP_SLTSTA_PDC | PCI_EXP_SLTSTA_DLLSC);
+	pcie_enable_notification(ctrl);
+}
+
 static void pcie_disable_notification(struct controller *ctrl)
 {
 	u16 mask;
@@ -847,7 +866,7 @@ struct controller *pcie_init(struct pcie_device *dev)
 		PCI_EXP_SLTSTA_MRLSC | PCI_EXP_SLTSTA_CC |
 		PCI_EXP_SLTSTA_DLLSC);
 
-	ctrl_info(ctrl, "Slot #%d AttnBtn%c PwrCtrl%c MRL%c AttnInd%c PwrInd%c HotPlug%c Surprise%c Interlock%c NoCompl%c LLActRep%c\n",
+	ctrl_info(ctrl, "Slot #%d AttnBtn%c PwrCtrl%c MRL%c AttnInd%c PwrInd%c HotPlug%c Surprise%c Interlock%c NoCompl%c LLActRep%c%s\n",
 		(slot_cap & PCI_EXP_SLTCAP_PSN) >> 19,
 		FLAG(slot_cap, PCI_EXP_SLTCAP_ABP),
 		FLAG(slot_cap, PCI_EXP_SLTCAP_PCP),
@@ -858,7 +877,8 @@ struct controller *pcie_init(struct pcie_device *dev)
 		FLAG(slot_cap, PCI_EXP_SLTCAP_HPS),
 		FLAG(slot_cap, PCI_EXP_SLTCAP_EIP),
 		FLAG(slot_cap, PCI_EXP_SLTCAP_NCCS),
-		FLAG(link_cap, PCI_EXP_LNKCAP_DLLLARC));
+		FLAG(link_cap, PCI_EXP_LNKCAP_DLLLARC),
+		pdev->broken_cmd_compl ? " (with Cmd Compl erratum)" : "");
 
 	if (pcie_init_slot(ctrl))
 		goto abort_ctrl;
@@ -877,3 +897,21 @@ void pciehp_release_ctrl(struct controller *ctrl)
 	pcie_cleanup_slot(ctrl);
 	kfree(ctrl);
 }
+
+static void quirk_cmd_compl(struct pci_dev *pdev)
+{
+	u32 slot_cap;
+
+	if (pci_is_pcie(pdev)) {
+		pcie_capability_read_dword(pdev, PCI_EXP_SLTCAP, &slot_cap);
+		if (slot_cap & PCI_EXP_SLTCAP_HPC &&
+		    !(slot_cap & PCI_EXP_SLTCAP_NCCS))
+			pdev->broken_cmd_compl = 1;
+	}
+}
+DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, PCI_ANY_ID,
+			      PCI_CLASS_BRIDGE_PCI, 8, quirk_cmd_compl);
+DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_QCOM, 0x0400,
+			      PCI_CLASS_BRIDGE_PCI, 8, quirk_cmd_compl);
+DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_QCOM, 0x0401,
+			      PCI_CLASS_BRIDGE_PCI, 8, quirk_cmd_compl);

drivers/pci/hotplug/pnv_php.c

@@ -220,12 +220,16 @@ static int pnv_php_populate_changeset(struct of_changeset *ocs,
 
 	for_each_child_of_node(dn, child) {
 		ret = of_changeset_attach_node(ocs, child);
-		if (ret)
+		if (ret) {
+			of_node_put(child);
 			break;
+		}
 
 		ret = pnv_php_populate_changeset(ocs, child);
-		if (ret)
+		if (ret) {
+			of_node_put(child);
 			break;
+		}
 	}
 
 	return ret;

drivers/pci/hotplug/shpchp.h

@@ -105,7 +105,6 @@ struct controller {
 };
 
 /* Define AMD SHPC ID  */
-#define PCI_DEVICE_ID_AMD_GOLAM_7450	0x7450
 #define PCI_DEVICE_ID_AMD_POGO_7458	0x7458
 
 /* AMD PCI-X bridge registers */
@@ -173,17 +172,6 @@ static inline const char *slot_name(struct slot *slot)
 	return hotplug_slot_name(slot->hotplug_slot);
 }
 
-#ifdef CONFIG_ACPI
-#include <linux/pci-acpi.h>
-static inline int get_hp_hw_control_from_firmware(struct pci_dev *dev)
-{
-	u32 flags = OSC_PCI_SHPC_NATIVE_HP_CONTROL;
-	return acpi_get_hp_hw_control_from_firmware(dev, flags);
-}
-#else
-#define get_hp_hw_control_from_firmware(dev) (0)
-#endif
-
 struct ctrl_reg {
 	volatile u32 base_offset;
 	volatile u32 slot_avail1;

drivers/pci/hotplug/shpchp_core.c

@@ -270,24 +270,12 @@ static int get_adapter_status(struct hotplug_slot *hotplug_slot, u8 *value)
 	return 0;
 }
 
-static int is_shpc_capable(struct pci_dev *dev)
-{
-	if (dev->vendor == PCI_VENDOR_ID_AMD &&
-	    dev->device == PCI_DEVICE_ID_AMD_GOLAM_7450)
-		return 1;
-	if (!pci_find_capability(dev, PCI_CAP_ID_SHPC))
-		return 0;
-	if (get_hp_hw_control_from_firmware(dev))
-		return 0;
-	return 1;
-}
-
 static int shpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	int rc;
 	struct controller *ctrl;
 
-	if (!is_shpc_capable(pdev))
+	if (acpi_get_hp_hw_control_from_firmware(pdev))
 		return -ENODEV;
 
 	ctrl = kzalloc(sizeof(*ctrl), GFP_KERNEL);

drivers/pci/hotplug/shpchp_ctrl.c

@@ -585,13 +585,13 @@ static int shpchp_enable_slot (struct slot *p_slot)
 	ctrl_dbg(ctrl, "%s: p_slot->pwr_save %x\n", __func__, p_slot->pwr_save);
 	p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
 
-	if (((p_slot->ctrl->pci_dev->vendor == PCI_VENDOR_ID_AMD) ||
-	    (p_slot->ctrl->pci_dev->device == PCI_DEVICE_ID_AMD_POGO_7458))
+	if ((p_slot->ctrl->pci_dev->vendor == PCI_VENDOR_ID_AMD &&
+	     p_slot->ctrl->pci_dev->device == PCI_DEVICE_ID_AMD_POGO_7458)
 	     && p_slot->ctrl->num_slots == 1) {
-		/* handle amd pogo errata; this must be done before enable  */
+		/* handle AMD POGO errata; this must be done before enable  */
 		amd_pogo_errata_save_misc_reg(p_slot);
 		retval = board_added(p_slot);
-		/* handle amd pogo errata; this must be done after enable  */
+		/* handle AMD POGO errata; this must be done after enable  */
 		amd_pogo_errata_restore_misc_reg(p_slot);
 	} else
 		retval = board_added(p_slot);

drivers/pci/pci-acpi.c

@@ -370,26 +370,57 @@ EXPORT_SYMBOL_GPL(pci_get_hp_params);
 
 /**
  * pciehp_is_native - Check whether a hotplug port is handled by the OS
- * @pdev: Hotplug port to check
+ * @bridge: Hotplug port to check
  *
- * Walk up from @pdev to the host bridge, obtain its cached _OSC Control Field
- * and return the value of the "PCI Express Native Hot Plug control" bit.
- * On failure to obtain the _OSC Control Field return %false.
+ * Returns true if the given @bridge is handled by the native PCIe hotplug
+ * driver.
  */
-bool pciehp_is_native(struct pci_dev *pdev)
+bool pciehp_is_native(struct pci_dev *bridge)
 {
-	struct acpi_pci_root *root;
-	acpi_handle handle;
+	const struct pci_host_bridge *host;
+	u32 slot_cap;
 
-	handle = acpi_find_root_bridge_handle(pdev);
-	if (!handle)
+	if (!IS_ENABLED(CONFIG_HOTPLUG_PCI_PCIE))
 		return false;
 
-	root = acpi_pci_find_root(handle);
-	if (!root)
+	pcie_capability_read_dword(bridge, PCI_EXP_SLTCAP, &slot_cap);
+	if (!(slot_cap & PCI_EXP_SLTCAP_HPC))
+		return false;
+
+	if (pcie_ports_native)
+		return true;
+
+	host = pci_find_host_bridge(bridge->bus);
+	return host->native_pcie_hotplug;
+}
+
+/**
+ * shpchp_is_native - Check whether a hotplug port is handled by the OS
+ * @bridge: Hotplug port to check
+ *
+ * Returns true if the given @bridge is handled by the native SHPC hotplug
+ * driver.
+ */
+bool shpchp_is_native(struct pci_dev *bridge)
+{
+	const struct pci_host_bridge *host;
+
+	if (!IS_ENABLED(CONFIG_HOTPLUG_PCI_SHPC))
+		return false;
+
+	/*
+	 * It is assumed that AMD GOLAM chips support SHPC but they do not
+	 * have SHPC capability.
+	 */
+	if (bridge->vendor == PCI_VENDOR_ID_AMD &&
+	    bridge->device == PCI_DEVICE_ID_AMD_GOLAM_7450)
+		return true;
+
+	if (!pci_find_capability(bridge, PCI_CAP_ID_SHPC))
 		return false;
 
-	return root->osc_control_set & OSC_PCI_EXPRESS_NATIVE_HP_CONTROL;
+	host = pci_find_host_bridge(bridge->bus);
+	return host->native_shpc_hotplug;
 }
 
 /**

drivers/pci/pcie/portdrv.h

@@ -11,8 +11,6 @@
 
 #include <linux/compiler.h>
 
-extern bool pcie_ports_native;
-
 /* Service Type */
 #define PCIE_PORT_SERVICE_PME_SHIFT	0	/* Power Management Event */
 #define PCIE_PORT_SERVICE_PME		(1 << PCIE_PORT_SERVICE_PME_SHIFT)

drivers/pci/pcie/portdrv_core.c

@@ -205,7 +205,7 @@ static int get_port_device_capability(struct pci_dev *dev)
 	int services = 0;
 
 	if (dev->is_hotplug_bridge &&
-	    (pcie_ports_native || host->native_hotplug)) {
+	    (pcie_ports_native || host->native_pcie_hotplug)) {
 		services |= PCIE_PORT_SERVICE_HP;
 
 		/*

drivers/pci/probe.c

@@ -552,7 +552,8 @@ struct pci_host_bridge *pci_alloc_host_bridge(size_t priv)
 	 * OS from interfering.
 	 */
 	bridge->native_aer = 1;
-	bridge->native_hotplug = 1;
+	bridge->native_pcie_hotplug = 1;
+	bridge->native_shpc_hotplug = 1;
 	bridge->native_pme = 1;
 	bridge->native_ltr = 1;
 
@@ -1048,6 +1049,8 @@ static unsigned int pci_scan_child_bus_extend(struct pci_bus *bus,
  * already configured by the BIOS and after we are done with all of
  * them, we proceed to assigning numbers to the remaining buses in
  * order to avoid overlaps between old and new bus numbers.
+ *
+ * Return: New subordinate number covering all buses behind this bridge.
  */
 static int pci_scan_bridge_extend(struct pci_bus *bus, struct pci_dev *dev,
 				  int max, unsigned int available_buses,
@@ -1238,20 +1241,15 @@ static int pci_scan_bridge_extend(struct pci_bus *bus, struct pci_dev *dev,
 		(is_cardbus ? "PCI CardBus %04x:%02x" : "PCI Bus %04x:%02x"),
 		pci_domain_nr(bus), child->number);
 
-	/* Has only triggered on CardBus, fixup is in yenta_socket */
+	/* Check that all devices are accessible */
 	while (bus->parent) {
 		if ((child->busn_res.end > bus->busn_res.end) ||
 		    (child->number > bus->busn_res.end) ||
 		    (child->number < bus->number) ||
 		    (child->busn_res.end < bus->number)) {
-			dev_info(&child->dev, "%pR %s hidden behind%s bridge %s %pR\n",
-				&child->busn_res,
-				(bus->number > child->busn_res.end &&
-				 bus->busn_res.end < child->number) ?
-					"wholly" : "partially",
-				bus->self->transparent ? " transparent" : "",
-				dev_name(&bus->dev),
-				&bus->busn_res);
+			dev_info(&dev->dev, "devices behind bridge are unusable because %pR cannot be assigned for them\n",
+				 &child->busn_res);
+			break;
 		}
 		bus = bus->parent;
 	}
@@ -1280,6 +1278,8 @@ out:
  * already configured by the BIOS and after we are done with all of
  * them, we proceed to assigning numbers to the remaining buses in
  * order to avoid overlaps between old and new bus numbers.
+ *
+ * Return: New subordinate number covering all buses behind this bridge.
  */
 int pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max, int pass)
 {
@@ -2695,7 +2695,14 @@ static unsigned int pci_scan_child_bus_extend(struct pci_bus *bus,
 	for_each_pci_bridge(dev, bus) {
 		cmax = max;
 		max = pci_scan_bridge_extend(bus, dev, max, 0, 0);
-		used_buses += cmax - max;
+
+		/*
+		 * Reserve one bus for each bridge now to avoid extending
+		 * hotplug bridges too much during the second scan below.
+		 */
+		used_buses++;
+		if (cmax - max > 1)
+			used_buses += cmax - max - 1;
 	}
 
 	/* Scan bridges that need to be reconfigured */
@@ -2718,12 +2725,14 @@ static unsigned int pci_scan_child_bus_extend(struct pci_bus *bus,
 			 * bridges if any.
 			 */
 			buses = available_buses / hotplug_bridges;
-			buses = min(buses, available_buses - used_buses);
+			buses = min(buses, available_buses - used_buses + 1);
 		}
 
 		cmax = max;
 		max = pci_scan_bridge_extend(bus, dev, cmax, buses, 1);
-		used_buses += max - cmax;
+		/* One bus is already accounted so don't add it again */
+		if (max - cmax > 1)
+			used_buses += max - cmax - 1;
 	}
 
 	/*

drivers/pci/quirks.c

@@ -4361,8 +4361,8 @@ static const struct pci_dev_acs_enabled {
 	{ PCI_VENDOR_ID_INTEL, 0x15b7, pci_quirk_mf_endpoint_acs },
 	{ PCI_VENDOR_ID_INTEL, 0x15b8, pci_quirk_mf_endpoint_acs },
 	/* QCOM QDF2xxx root ports */
-	{ 0x17cb, 0x400, pci_quirk_qcom_rp_acs },
-	{ 0x17cb, 0x401, pci_quirk_qcom_rp_acs },
+	{ PCI_VENDOR_ID_QCOM, 0x0400, pci_quirk_qcom_rp_acs },
+	{ PCI_VENDOR_ID_QCOM, 0x0401, pci_quirk_qcom_rp_acs },
 	/* Intel PCH root ports */
 	{ PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_quirk_intel_pch_acs },
 	{ PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_quirk_intel_spt_pch_acs },

drivers/pci/setup-bus.c

@@ -1942,57 +1942,57 @@ static void pci_bus_distribute_available_resources(struct pci_bus *bus,
 			remaining_mmio_pref -= resource_size(res);
 	}
 
+	/*
+	 * There is only one bridge on the bus so it gets all available
+	 * resources which it can then distribute to the possible
+	 * hotplug bridges below.
+	 */
+	if (hotplug_bridges + normal_bridges == 1) {
+		dev = list_first_entry(&bus->devices, struct pci_dev, bus_list);
+		if (dev->subordinate) {
+			pci_bus_distribute_available_resources(dev->subordinate,
+				add_list, available_io, available_mmio,
+				available_mmio_pref);
+		}
+		return;
+	}
+
 	/*
 	 * Go over devices on this bus and distribute the remaining
 	 * resource space between hotplug bridges.
 	 */
 	for_each_pci_bridge(dev, bus) {
+		resource_size_t align, io, mmio, mmio_pref;
 		struct pci_bus *b;
 
 		b = dev->subordinate;
-		if (!b)
+		if (!b || !dev->is_hotplug_bridge)
 			continue;
 
-		if (!hotplug_bridges && normal_bridges == 1) {
-			/*
-			 * There is only one bridge on the bus (upstream
-			 * port) so it gets all available resources
-			 * which it can then distribute to the possible
-			 * hotplug bridges below.
-			 */
-			pci_bus_distribute_available_resources(b, add_list,
-				available_io, available_mmio,
-				available_mmio_pref);
-		} else if (dev->is_hotplug_bridge) {
-			resource_size_t align, io, mmio, mmio_pref;
-
-			/*
-			 * Distribute available extra resources equally
-			 * between hotplug-capable downstream ports
-			 * taking alignment into account.
-			 *
-			 * Here hotplug_bridges is always != 0.
-			 */
-			align = pci_resource_alignment(bridge, io_res);
-			io = div64_ul(available_io, hotplug_bridges);
-			io = min(ALIGN(io, align), remaining_io);
-			remaining_io -= io;
-
-			align = pci_resource_alignment(bridge, mmio_res);
-			mmio = div64_ul(available_mmio, hotplug_bridges);
-			mmio = min(ALIGN(mmio, align), remaining_mmio);
-			remaining_mmio -= mmio;
-
-			align = pci_resource_alignment(bridge, mmio_pref_res);
-			mmio_pref = div64_ul(available_mmio_pref,
-					     hotplug_bridges);
-			mmio_pref = min(ALIGN(mmio_pref, align),
-					remaining_mmio_pref);
-			remaining_mmio_pref -= mmio_pref;
-
-			pci_bus_distribute_available_resources(b, add_list, io,
-							       mmio, mmio_pref);
-		}
+		/*
+		 * Distribute available extra resources equally between
+		 * hotplug-capable downstream ports taking alignment into
+		 * account.
+		 *
+		 * Here hotplug_bridges is always != 0.
+		 */
+		align = pci_resource_alignment(bridge, io_res);
+		io = div64_ul(available_io, hotplug_bridges);
+		io = min(ALIGN(io, align), remaining_io);
+		remaining_io -= io;
+
+		align = pci_resource_alignment(bridge, mmio_res);
+		mmio = div64_ul(available_mmio, hotplug_bridges);
+		mmio = min(ALIGN(mmio, align), remaining_mmio);
+		remaining_mmio -= mmio;
+
+		align = pci_resource_alignment(bridge, mmio_pref_res);
+		mmio_pref = div64_ul(available_mmio_pref, hotplug_bridges);
+		mmio_pref = min(ALIGN(mmio_pref, align), remaining_mmio_pref);
+		remaining_mmio_pref -= mmio_pref;
+
+		pci_bus_distribute_available_resources(b, add_list, io, mmio,
+						       mmio_pref);
 	}
 }
 

include/linux/pci.h

@@ -407,6 +407,9 @@ struct pci_dev {
 	struct bin_attribute *res_attr[DEVICE_COUNT_RESOURCE]; /* sysfs file for resources */
 	struct bin_attribute *res_attr_wc[DEVICE_COUNT_RESOURCE]; /* sysfs file for WC mapping of resources */
 
+#ifdef CONFIG_HOTPLUG_PCI_PCIE
+	unsigned int	broken_cmd_compl:1;	/* No compl for some cmds */
+#endif
 #ifdef CONFIG_PCIE_PTM
 	unsigned int	ptm_root:1;
 	unsigned int	ptm_enabled:1;
@@ -472,7 +475,8 @@ struct pci_host_bridge {
 	unsigned int	ignore_reset_delay:1;	/* For entire hierarchy */
 	unsigned int	no_ext_tags:1;		/* No Extended Tags */
 	unsigned int	native_aer:1;		/* OS may use PCIe AER */
-	unsigned int	native_hotplug:1;	/* OS may use PCIe hotplug */
+	unsigned int	native_pcie_hotplug:1;	/* OS may use PCIe hotplug */
+	unsigned int	native_shpc_hotplug:1;	/* OS may use SHPC hotplug */
 	unsigned int	native_pme:1;		/* OS may use PCIe PME */
 	unsigned int	native_ltr:1;		/* OS may use PCIe LTR */
 	/* Resource alignment requirements */
@@ -1451,8 +1455,10 @@ static inline int pci_irqd_intx_xlate(struct irq_domain *d,
 
 #ifdef CONFIG_PCIEPORTBUS
 extern bool pcie_ports_disabled;
+extern bool pcie_ports_native;
 #else
 #define pcie_ports_disabled	true
+#define pcie_ports_native	false
 #endif
 
 #ifdef CONFIG_PCIEASPM

include/linux/pci_hotplug.h

@@ -162,8 +162,9 @@ struct hotplug_params {
 #ifdef CONFIG_ACPI
 #include <linux/acpi.h>
 int pci_get_hp_params(struct pci_dev *dev, struct hotplug_params *hpp);
-bool pciehp_is_native(struct pci_dev *pdev);
-int acpi_get_hp_hw_control_from_firmware(struct pci_dev *dev, u32 flags);
+bool pciehp_is_native(struct pci_dev *bridge);
+int acpi_get_hp_hw_control_from_firmware(struct pci_dev *bridge);
+bool shpchp_is_native(struct pci_dev *bridge);
 int acpi_pci_check_ejectable(struct pci_bus *pbus, acpi_handle handle);
 int acpi_pci_detect_ejectable(acpi_handle handle);
 #else
@@ -172,6 +173,17 @@ static inline int pci_get_hp_params(struct pci_dev *dev,
 {
 	return -ENODEV;
 }
-static inline bool pciehp_is_native(struct pci_dev *pdev) { return true; }
+
+static inline int acpi_get_hp_hw_control_from_firmware(struct pci_dev *bridge)
+{
+	return 0;
+}
+static inline bool pciehp_is_native(struct pci_dev *bridge) { return true; }
+static inline bool shpchp_is_native(struct pci_dev *bridge) { return true; }
 #endif
+
+static inline bool hotplug_is_native(struct pci_dev *bridge)
+{
+	return pciehp_is_native(bridge) || shpchp_is_native(bridge);
+}
 #endif

include/linux/pci_ids.h

@@ -561,6 +561,7 @@
 #define PCI_DEVICE_ID_AMD_OPUS_7443	0x7443
 #define PCI_DEVICE_ID_AMD_VIPER_7443	0x7443
 #define PCI_DEVICE_ID_AMD_OPUS_7445	0x7445
+#define PCI_DEVICE_ID_AMD_GOLAM_7450	0x7450
 #define PCI_DEVICE_ID_AMD_8111_PCI	0x7460
 #define PCI_DEVICE_ID_AMD_8111_LPC	0x7468
 #define PCI_DEVICE_ID_AMD_8111_IDE	0x7469
@@ -2387,6 +2388,8 @@
 
 #define PCI_VENDOR_ID_LENOVO		0x17aa
 
+#define PCI_VENDOR_ID_QCOM		0x17cb
+
 #define PCI_VENDOR_ID_CDNS		0x17cd
 
 #define PCI_VENDOR_ID_ARECA		0x17d3