|
@@ -24,122 +24,318 @@
|
|
|
|
|
|
#define VENDOR_V_22 0x12
|
|
|
#define VENDOR_V_23 0x13
|
|
|
-static u32 esdhc_readl(struct sdhci_host *host, int reg)
|
|
|
+
|
|
|
+struct sdhci_esdhc {
|
|
|
+ u8 vendor_ver;
|
|
|
+ u8 spec_ver;
|
|
|
+};
|
|
|
+
|
|
|
+/**
|
|
|
+ * esdhc_read*_fixup - Fixup the value read from incompatible eSDHC register
|
|
|
+ * to make it compatible with SD spec.
|
|
|
+ *
|
|
|
+ * @host: pointer to sdhci_host
|
|
|
+ * @spec_reg: SD spec register address
|
|
|
+ * @value: 32bit eSDHC register value on spec_reg address
|
|
|
+ *
|
|
|
+ * In SD spec, there are 8/16/32/64 bits registers, while all of eSDHC
|
|
|
+ * registers are 32 bits. There are differences in register size, register
|
|
|
+ * address, register function, bit position and function between eSDHC spec
|
|
|
+ * and SD spec.
|
|
|
+ *
|
|
|
+ * Return a fixed up register value
|
|
|
+ */
|
|
|
+static u32 esdhc_readl_fixup(struct sdhci_host *host,
|
|
|
+ int spec_reg, u32 value)
|
|
|
{
|
|
|
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
|
|
+ struct sdhci_esdhc *esdhc = pltfm_host->priv;
|
|
|
u32 ret;
|
|
|
|
|
|
- ret = in_be32(host->ioaddr + reg);
|
|
|
/*
|
|
|
* The bit of ADMA flag in eSDHC is not compatible with standard
|
|
|
* SDHC register, so set fake flag SDHCI_CAN_DO_ADMA2 when ADMA is
|
|
|
* supported by eSDHC.
|
|
|
* And for many FSL eSDHC controller, the reset value of field
|
|
|
- * SDHCI_CAN_DO_ADMA1 is one, but some of them can't support ADMA,
|
|
|
+ * SDHCI_CAN_DO_ADMA1 is 1, but some of them can't support ADMA,
|
|
|
* only these vendor version is greater than 2.2/0x12 support ADMA.
|
|
|
- * For FSL eSDHC, must aligned 4-byte, so use 0xFC to read the
|
|
|
- * the verdor version number, oxFE is SDHCI_HOST_VERSION.
|
|
|
*/
|
|
|
- if ((reg == SDHCI_CAPABILITIES) && (ret & SDHCI_CAN_DO_ADMA1)) {
|
|
|
- u32 tmp = in_be32(host->ioaddr + SDHCI_SLOT_INT_STATUS);
|
|
|
- tmp = (tmp & SDHCI_VENDOR_VER_MASK) >> SDHCI_VENDOR_VER_SHIFT;
|
|
|
- if (tmp > VENDOR_V_22)
|
|
|
- ret |= SDHCI_CAN_DO_ADMA2;
|
|
|
+ if ((spec_reg == SDHCI_CAPABILITIES) && (value & SDHCI_CAN_DO_ADMA1)) {
|
|
|
+ if (esdhc->vendor_ver > VENDOR_V_22) {
|
|
|
+ ret = value | SDHCI_CAN_DO_ADMA2;
|
|
|
+ return ret;
|
|
|
+ }
|
|
|
}
|
|
|
-
|
|
|
+ ret = value;
|
|
|
return ret;
|
|
|
}
|
|
|
|
|
|
-static u16 esdhc_readw(struct sdhci_host *host, int reg)
|
|
|
+static u16 esdhc_readw_fixup(struct sdhci_host *host,
|
|
|
+ int spec_reg, u32 value)
|
|
|
{
|
|
|
u16 ret;
|
|
|
- int base = reg & ~0x3;
|
|
|
- int shift = (reg & 0x2) * 8;
|
|
|
+ int shift = (spec_reg & 0x2) * 8;
|
|
|
|
|
|
- if (unlikely(reg == SDHCI_HOST_VERSION))
|
|
|
- ret = in_be32(host->ioaddr + base) & 0xffff;
|
|
|
+ if (spec_reg == SDHCI_HOST_VERSION)
|
|
|
+ ret = value & 0xffff;
|
|
|
else
|
|
|
- ret = (in_be32(host->ioaddr + base) >> shift) & 0xffff;
|
|
|
+ ret = (value >> shift) & 0xffff;
|
|
|
return ret;
|
|
|
}
|
|
|
|
|
|
-static u8 esdhc_readb(struct sdhci_host *host, int reg)
|
|
|
+static u8 esdhc_readb_fixup(struct sdhci_host *host,
|
|
|
+ int spec_reg, u32 value)
|
|
|
{
|
|
|
- int base = reg & ~0x3;
|
|
|
- int shift = (reg & 0x3) * 8;
|
|
|
- u8 ret = (in_be32(host->ioaddr + base) >> shift) & 0xff;
|
|
|
+ u8 ret;
|
|
|
+ u8 dma_bits;
|
|
|
+ int shift = (spec_reg & 0x3) * 8;
|
|
|
+
|
|
|
+ ret = (value >> shift) & 0xff;
|
|
|
|
|
|
/*
|
|
|
* "DMA select" locates at offset 0x28 in SD specification, but on
|
|
|
* P5020 or P3041, it locates at 0x29.
|
|
|
*/
|
|
|
- if (reg == SDHCI_HOST_CONTROL) {
|
|
|
- u32 dma_bits;
|
|
|
-
|
|
|
- dma_bits = in_be32(host->ioaddr + reg);
|
|
|
+ if (spec_reg == SDHCI_HOST_CONTROL) {
|
|
|
/* DMA select is 22,23 bits in Protocol Control Register */
|
|
|
- dma_bits = (dma_bits >> 5) & SDHCI_CTRL_DMA_MASK;
|
|
|
-
|
|
|
+ dma_bits = (value >> 5) & SDHCI_CTRL_DMA_MASK;
|
|
|
/* fixup the result */
|
|
|
ret &= ~SDHCI_CTRL_DMA_MASK;
|
|
|
ret |= dma_bits;
|
|
|
}
|
|
|
-
|
|
|
return ret;
|
|
|
}
|
|
|
|
|
|
-static void esdhc_writel(struct sdhci_host *host, u32 val, int reg)
|
|
|
+/**
|
|
|
+ * esdhc_write*_fixup - Fixup the SD spec register value so that it could be
|
|
|
+ * written into eSDHC register.
|
|
|
+ *
|
|
|
+ * @host: pointer to sdhci_host
|
|
|
+ * @spec_reg: SD spec register address
|
|
|
+ * @value: 8/16/32bit SD spec register value that would be written
|
|
|
+ * @old_value: 32bit eSDHC register value on spec_reg address
|
|
|
+ *
|
|
|
+ * In SD spec, there are 8/16/32/64 bits registers, while all of eSDHC
|
|
|
+ * registers are 32 bits. There are differences in register size, register
|
|
|
+ * address, register function, bit position and function between eSDHC spec
|
|
|
+ * and SD spec.
|
|
|
+ *
|
|
|
+ * Return a fixed up register value
|
|
|
+ */
|
|
|
+static u32 esdhc_writel_fixup(struct sdhci_host *host,
|
|
|
+ int spec_reg, u32 value, u32 old_value)
|
|
|
{
|
|
|
+ u32 ret;
|
|
|
+
|
|
|
/*
|
|
|
- * Enable IRQSTATEN[BGESEN] is just to set IRQSTAT[BGE]
|
|
|
- * when SYSCTL[RSTD]) is set for some special operations.
|
|
|
- * No any impact other operation.
|
|
|
+ * Enabling IRQSTATEN[BGESEN] is just to set IRQSTAT[BGE]
|
|
|
+ * when SYSCTL[RSTD] is set for some special operations.
|
|
|
+ * No any impact on other operation.
|
|
|
*/
|
|
|
- if (reg == SDHCI_INT_ENABLE)
|
|
|
- val |= SDHCI_INT_BLK_GAP;
|
|
|
- sdhci_be32bs_writel(host, val, reg);
|
|
|
+ if (spec_reg == SDHCI_INT_ENABLE)
|
|
|
+ ret = value | SDHCI_INT_BLK_GAP;
|
|
|
+ else
|
|
|
+ ret = value;
|
|
|
+
|
|
|
+ return ret;
|
|
|
}
|
|
|
|
|
|
-static void esdhc_writew(struct sdhci_host *host, u16 val, int reg)
|
|
|
+static u32 esdhc_writew_fixup(struct sdhci_host *host,
|
|
|
+ int spec_reg, u16 value, u32 old_value)
|
|
|
{
|
|
|
- if (reg == SDHCI_BLOCK_SIZE) {
|
|
|
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
|
|
+ int shift = (spec_reg & 0x2) * 8;
|
|
|
+ u32 ret;
|
|
|
+
|
|
|
+ switch (spec_reg) {
|
|
|
+ case SDHCI_TRANSFER_MODE:
|
|
|
+ /*
|
|
|
+ * Postpone this write, we must do it together with a
|
|
|
+ * command write that is down below. Return old value.
|
|
|
+ */
|
|
|
+ pltfm_host->xfer_mode_shadow = value;
|
|
|
+ return old_value;
|
|
|
+ case SDHCI_COMMAND:
|
|
|
+ ret = (value << 16) | pltfm_host->xfer_mode_shadow;
|
|
|
+ return ret;
|
|
|
+ }
|
|
|
+
|
|
|
+ ret = old_value & (~(0xffff << shift));
|
|
|
+ ret |= (value << shift);
|
|
|
+
|
|
|
+ if (spec_reg == SDHCI_BLOCK_SIZE) {
|
|
|
/*
|
|
|
* Two last DMA bits are reserved, and first one is used for
|
|
|
* non-standard blksz of 4096 bytes that we don't support
|
|
|
* yet. So clear the DMA boundary bits.
|
|
|
*/
|
|
|
- val &= ~SDHCI_MAKE_BLKSZ(0x7, 0);
|
|
|
+ ret &= (~SDHCI_MAKE_BLKSZ(0x7, 0));
|
|
|
}
|
|
|
- sdhci_be32bs_writew(host, val, reg);
|
|
|
+ return ret;
|
|
|
}
|
|
|
|
|
|
-static void esdhc_writeb(struct sdhci_host *host, u8 val, int reg)
|
|
|
+static u32 esdhc_writeb_fixup(struct sdhci_host *host,
|
|
|
+ int spec_reg, u8 value, u32 old_value)
|
|
|
{
|
|
|
+ u32 ret;
|
|
|
+ u32 dma_bits;
|
|
|
+ u8 tmp;
|
|
|
+ int shift = (spec_reg & 0x3) * 8;
|
|
|
+
|
|
|
/*
|
|
|
* "DMA select" location is offset 0x28 in SD specification, but on
|
|
|
* P5020 or P3041, it's located at 0x29.
|
|
|
*/
|
|
|
- if (reg == SDHCI_HOST_CONTROL) {
|
|
|
- u32 dma_bits;
|
|
|
-
|
|
|
+ if (spec_reg == SDHCI_HOST_CONTROL) {
|
|
|
/*
|
|
|
* If host control register is not standard, exit
|
|
|
* this function
|
|
|
*/
|
|
|
if (host->quirks2 & SDHCI_QUIRK2_BROKEN_HOST_CONTROL)
|
|
|
- return;
|
|
|
+ return old_value;
|
|
|
|
|
|
/* DMA select is 22,23 bits in Protocol Control Register */
|
|
|
- dma_bits = (val & SDHCI_CTRL_DMA_MASK) << 5;
|
|
|
- clrsetbits_be32(host->ioaddr + reg , SDHCI_CTRL_DMA_MASK << 5,
|
|
|
- dma_bits);
|
|
|
- val &= ~SDHCI_CTRL_DMA_MASK;
|
|
|
- val |= in_be32(host->ioaddr + reg) & SDHCI_CTRL_DMA_MASK;
|
|
|
+ dma_bits = (value & SDHCI_CTRL_DMA_MASK) << 5;
|
|
|
+ ret = (old_value & (~(SDHCI_CTRL_DMA_MASK << 5))) | dma_bits;
|
|
|
+ tmp = (value & (~SDHCI_CTRL_DMA_MASK)) |
|
|
|
+ (old_value & SDHCI_CTRL_DMA_MASK);
|
|
|
+ ret = (ret & (~0xff)) | tmp;
|
|
|
+
|
|
|
+ /* Prevent SDHCI core from writing reserved bits (e.g. HISPD) */
|
|
|
+ ret &= ~ESDHC_HOST_CONTROL_RES;
|
|
|
+ return ret;
|
|
|
}
|
|
|
|
|
|
- /* Prevent SDHCI core from writing reserved bits (e.g. HISPD). */
|
|
|
- if (reg == SDHCI_HOST_CONTROL)
|
|
|
- val &= ~ESDHC_HOST_CONTROL_RES;
|
|
|
- sdhci_be32bs_writeb(host, val, reg);
|
|
|
+ ret = (old_value & (~(0xff << shift))) | (value << shift);
|
|
|
+ return ret;
|
|
|
+}
|
|
|
+
|
|
|
+static u32 esdhc_be_readl(struct sdhci_host *host, int reg)
|
|
|
+{
|
|
|
+ u32 ret;
|
|
|
+ u32 value;
|
|
|
+
|
|
|
+ value = ioread32be(host->ioaddr + reg);
|
|
|
+ ret = esdhc_readl_fixup(host, reg, value);
|
|
|
+
|
|
|
+ return ret;
|
|
|
+}
|
|
|
+
|
|
|
+static u32 esdhc_le_readl(struct sdhci_host *host, int reg)
|
|
|
+{
|
|
|
+ u32 ret;
|
|
|
+ u32 value;
|
|
|
+
|
|
|
+ value = ioread32(host->ioaddr + reg);
|
|
|
+ ret = esdhc_readl_fixup(host, reg, value);
|
|
|
+
|
|
|
+ return ret;
|
|
|
+}
|
|
|
+
|
|
|
+static u16 esdhc_be_readw(struct sdhci_host *host, int reg)
|
|
|
+{
|
|
|
+ u16 ret;
|
|
|
+ u32 value;
|
|
|
+ int base = reg & ~0x3;
|
|
|
+
|
|
|
+ value = ioread32be(host->ioaddr + base);
|
|
|
+ ret = esdhc_readw_fixup(host, reg, value);
|
|
|
+ return ret;
|
|
|
+}
|
|
|
+
|
|
|
+static u16 esdhc_le_readw(struct sdhci_host *host, int reg)
|
|
|
+{
|
|
|
+ u16 ret;
|
|
|
+ u32 value;
|
|
|
+ int base = reg & ~0x3;
|
|
|
+
|
|
|
+ value = ioread32(host->ioaddr + base);
|
|
|
+ ret = esdhc_readw_fixup(host, reg, value);
|
|
|
+ return ret;
|
|
|
+}
|
|
|
+
|
|
|
+static u8 esdhc_be_readb(struct sdhci_host *host, int reg)
|
|
|
+{
|
|
|
+ u8 ret;
|
|
|
+ u32 value;
|
|
|
+ int base = reg & ~0x3;
|
|
|
+
|
|
|
+ value = ioread32be(host->ioaddr + base);
|
|
|
+ ret = esdhc_readb_fixup(host, reg, value);
|
|
|
+ return ret;
|
|
|
+}
|
|
|
+
|
|
|
+static u8 esdhc_le_readb(struct sdhci_host *host, int reg)
|
|
|
+{
|
|
|
+ u8 ret;
|
|
|
+ u32 value;
|
|
|
+ int base = reg & ~0x3;
|
|
|
+
|
|
|
+ value = ioread32(host->ioaddr + base);
|
|
|
+ ret = esdhc_readb_fixup(host, reg, value);
|
|
|
+ return ret;
|
|
|
+}
|
|
|
+
|
|
|
+static void esdhc_be_writel(struct sdhci_host *host, u32 val, int reg)
|
|
|
+{
|
|
|
+ u32 value;
|
|
|
+
|
|
|
+ value = esdhc_writel_fixup(host, reg, val, 0);
|
|
|
+ iowrite32be(value, host->ioaddr + reg);
|
|
|
+}
|
|
|
+
|
|
|
+static void esdhc_le_writel(struct sdhci_host *host, u32 val, int reg)
|
|
|
+{
|
|
|
+ u32 value;
|
|
|
+
|
|
|
+ value = esdhc_writel_fixup(host, reg, val, 0);
|
|
|
+ iowrite32(value, host->ioaddr + reg);
|
|
|
+}
|
|
|
+
|
|
|
+static void esdhc_be_writew(struct sdhci_host *host, u16 val, int reg)
|
|
|
+{
|
|
|
+ int base = reg & ~0x3;
|
|
|
+ u32 value;
|
|
|
+ u32 ret;
|
|
|
+
|
|
|
+ value = ioread32be(host->ioaddr + base);
|
|
|
+ ret = esdhc_writew_fixup(host, reg, val, value);
|
|
|
+ if (reg != SDHCI_TRANSFER_MODE)
|
|
|
+ iowrite32be(ret, host->ioaddr + base);
|
|
|
+}
|
|
|
+
|
|
|
+static void esdhc_le_writew(struct sdhci_host *host, u16 val, int reg)
|
|
|
+{
|
|
|
+ int base = reg & ~0x3;
|
|
|
+ u32 value;
|
|
|
+ u32 ret;
|
|
|
+
|
|
|
+ value = ioread32(host->ioaddr + base);
|
|
|
+ ret = esdhc_writew_fixup(host, reg, val, value);
|
|
|
+ if (reg != SDHCI_TRANSFER_MODE)
|
|
|
+ iowrite32(ret, host->ioaddr + base);
|
|
|
+}
|
|
|
+
|
|
|
+static void esdhc_be_writeb(struct sdhci_host *host, u8 val, int reg)
|
|
|
+{
|
|
|
+ int base = reg & ~0x3;
|
|
|
+ u32 value;
|
|
|
+ u32 ret;
|
|
|
+
|
|
|
+ value = ioread32be(host->ioaddr + base);
|
|
|
+ ret = esdhc_writeb_fixup(host, reg, val, value);
|
|
|
+ iowrite32be(ret, host->ioaddr + base);
|
|
|
+}
|
|
|
+
|
|
|
+static void esdhc_le_writeb(struct sdhci_host *host, u8 val, int reg)
|
|
|
+{
|
|
|
+ int base = reg & ~0x3;
|
|
|
+ u32 value;
|
|
|
+ u32 ret;
|
|
|
+
|
|
|
+ value = ioread32(host->ioaddr + base);
|
|
|
+ ret = esdhc_writeb_fixup(host, reg, val, value);
|
|
|
+ iowrite32(ret, host->ioaddr + base);
|
|
|
}
|
|
|
|
|
|
/*
|
|
@@ -149,19 +345,17 @@ static void esdhc_writeb(struct sdhci_host *host, u8 val, int reg)
|
|
|
* For Continue, apply soft reset for data(SYSCTL[RSTD]);
|
|
|
* and re-issue the entire read transaction from beginning.
|
|
|
*/
|
|
|
-static void esdhci_of_adma_workaround(struct sdhci_host *host, u32 intmask)
|
|
|
+static void esdhc_of_adma_workaround(struct sdhci_host *host, u32 intmask)
|
|
|
{
|
|
|
- u32 tmp;
|
|
|
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
|
|
+ struct sdhci_esdhc *esdhc = pltfm_host->priv;
|
|
|
bool applicable;
|
|
|
dma_addr_t dmastart;
|
|
|
dma_addr_t dmanow;
|
|
|
|
|
|
- tmp = in_be32(host->ioaddr + SDHCI_SLOT_INT_STATUS);
|
|
|
- tmp = (tmp & SDHCI_VENDOR_VER_MASK) >> SDHCI_VENDOR_VER_SHIFT;
|
|
|
-
|
|
|
applicable = (intmask & SDHCI_INT_DATA_END) &&
|
|
|
- (intmask & SDHCI_INT_BLK_GAP) &&
|
|
|
- (tmp == VENDOR_V_23);
|
|
|
+ (intmask & SDHCI_INT_BLK_GAP) &&
|
|
|
+ (esdhc->vendor_ver == VENDOR_V_23);
|
|
|
if (!applicable)
|
|
|
return;
|
|
|
|
|
@@ -179,7 +373,11 @@ static void esdhci_of_adma_workaround(struct sdhci_host *host, u32 intmask)
|
|
|
|
|
|
static int esdhc_of_enable_dma(struct sdhci_host *host)
|
|
|
{
|
|
|
- setbits32(host->ioaddr + ESDHC_DMA_SYSCTL, ESDHC_DMA_SNOOP);
|
|
|
+ u32 value;
|
|
|
+
|
|
|
+ value = sdhci_readl(host, ESDHC_DMA_SYSCTL);
|
|
|
+ value |= ESDHC_DMA_SNOOP;
|
|
|
+ sdhci_writel(host, value, ESDHC_DMA_SYSCTL);
|
|
|
return 0;
|
|
|
}
|
|
|
|
|
@@ -199,6 +397,8 @@ static unsigned int esdhc_of_get_min_clock(struct sdhci_host *host)
|
|
|
|
|
|
static void esdhc_of_set_clock(struct sdhci_host *host, unsigned int clock)
|
|
|
{
|
|
|
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
|
|
+ struct sdhci_esdhc *esdhc = pltfm_host->priv;
|
|
|
int pre_div = 1;
|
|
|
int div = 1;
|
|
|
u32 temp;
|
|
@@ -209,9 +409,7 @@ static void esdhc_of_set_clock(struct sdhci_host *host, unsigned int clock)
|
|
|
return;
|
|
|
|
|
|
/* Workaround to start pre_div at 2 for VNN < VENDOR_V_23 */
|
|
|
- temp = esdhc_readw(host, SDHCI_HOST_VERSION);
|
|
|
- temp = (temp & SDHCI_VENDOR_VER_MASK) >> SDHCI_VENDOR_VER_SHIFT;
|
|
|
- if (temp < VENDOR_V_23)
|
|
|
+ if (esdhc->vendor_ver < VENDOR_V_23)
|
|
|
pre_div = 2;
|
|
|
|
|
|
/* Workaround to reduce the clock frequency for p1010 esdhc */
|
|
@@ -247,39 +445,26 @@ static void esdhc_of_set_clock(struct sdhci_host *host, unsigned int clock)
|
|
|
mdelay(1);
|
|
|
}
|
|
|
|
|
|
-static void esdhc_of_platform_init(struct sdhci_host *host)
|
|
|
-{
|
|
|
- u32 vvn;
|
|
|
-
|
|
|
- vvn = in_be32(host->ioaddr + SDHCI_SLOT_INT_STATUS);
|
|
|
- vvn = (vvn & SDHCI_VENDOR_VER_MASK) >> SDHCI_VENDOR_VER_SHIFT;
|
|
|
- if (vvn == VENDOR_V_22)
|
|
|
- host->quirks2 |= SDHCI_QUIRK2_HOST_NO_CMD23;
|
|
|
-
|
|
|
- if (vvn > VENDOR_V_22)
|
|
|
- host->quirks &= ~SDHCI_QUIRK_NO_BUSY_IRQ;
|
|
|
-}
|
|
|
-
|
|
|
static void esdhc_pltfm_set_bus_width(struct sdhci_host *host, int width)
|
|
|
{
|
|
|
u32 ctrl;
|
|
|
|
|
|
+ ctrl = sdhci_readl(host, ESDHC_PROCTL);
|
|
|
+ ctrl &= (~ESDHC_CTRL_BUSWIDTH_MASK);
|
|
|
switch (width) {
|
|
|
case MMC_BUS_WIDTH_8:
|
|
|
- ctrl = ESDHC_CTRL_8BITBUS;
|
|
|
+ ctrl |= ESDHC_CTRL_8BITBUS;
|
|
|
break;
|
|
|
|
|
|
case MMC_BUS_WIDTH_4:
|
|
|
- ctrl = ESDHC_CTRL_4BITBUS;
|
|
|
+ ctrl |= ESDHC_CTRL_4BITBUS;
|
|
|
break;
|
|
|
|
|
|
default:
|
|
|
- ctrl = 0;
|
|
|
break;
|
|
|
}
|
|
|
|
|
|
- clrsetbits_be32(host->ioaddr + SDHCI_HOST_CONTROL,
|
|
|
- ESDHC_CTRL_BUSWIDTH_MASK, ctrl);
|
|
|
+ sdhci_writel(host, ctrl, ESDHC_PROCTL);
|
|
|
}
|
|
|
|
|
|
static void esdhc_reset(struct sdhci_host *host, u8 mask)
|
|
@@ -290,32 +475,13 @@ static void esdhc_reset(struct sdhci_host *host, u8 mask)
|
|
|
sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
|
|
|
}
|
|
|
|
|
|
-static const struct sdhci_ops sdhci_esdhc_ops = {
|
|
|
- .read_l = esdhc_readl,
|
|
|
- .read_w = esdhc_readw,
|
|
|
- .read_b = esdhc_readb,
|
|
|
- .write_l = esdhc_writel,
|
|
|
- .write_w = esdhc_writew,
|
|
|
- .write_b = esdhc_writeb,
|
|
|
- .set_clock = esdhc_of_set_clock,
|
|
|
- .enable_dma = esdhc_of_enable_dma,
|
|
|
- .get_max_clock = esdhc_of_get_max_clock,
|
|
|
- .get_min_clock = esdhc_of_get_min_clock,
|
|
|
- .platform_init = esdhc_of_platform_init,
|
|
|
- .adma_workaround = esdhci_of_adma_workaround,
|
|
|
- .set_bus_width = esdhc_pltfm_set_bus_width,
|
|
|
- .reset = esdhc_reset,
|
|
|
- .set_uhs_signaling = sdhci_set_uhs_signaling,
|
|
|
-};
|
|
|
-
|
|
|
#ifdef CONFIG_PM
|
|
|
-
|
|
|
static u32 esdhc_proctl;
|
|
|
static int esdhc_of_suspend(struct device *dev)
|
|
|
{
|
|
|
struct sdhci_host *host = dev_get_drvdata(dev);
|
|
|
|
|
|
- esdhc_proctl = sdhci_be32bs_readl(host, SDHCI_HOST_CONTROL);
|
|
|
+ esdhc_proctl = sdhci_readl(host, SDHCI_HOST_CONTROL);
|
|
|
|
|
|
return sdhci_suspend_host(host);
|
|
|
}
|
|
@@ -328,9 +494,8 @@ static int esdhc_of_resume(struct device *dev)
|
|
|
if (ret == 0) {
|
|
|
/* Isn't this already done by sdhci_resume_host() ? --rmk */
|
|
|
esdhc_of_enable_dma(host);
|
|
|
- sdhci_be32bs_writel(host, esdhc_proctl, SDHCI_HOST_CONTROL);
|
|
|
+ sdhci_writel(host, esdhc_proctl, SDHCI_HOST_CONTROL);
|
|
|
}
|
|
|
-
|
|
|
return ret;
|
|
|
}
|
|
|
|
|
@@ -343,30 +508,92 @@ static const struct dev_pm_ops esdhc_pmops = {
|
|
|
#define ESDHC_PMOPS NULL
|
|
|
#endif
|
|
|
|
|
|
-static const struct sdhci_pltfm_data sdhci_esdhc_pdata = {
|
|
|
- /*
|
|
|
- * card detection could be handled via GPIO
|
|
|
- * eSDHC cannot support End Attribute in NOP ADMA descriptor
|
|
|
- */
|
|
|
+static const struct sdhci_ops sdhci_esdhc_be_ops = {
|
|
|
+ .read_l = esdhc_be_readl,
|
|
|
+ .read_w = esdhc_be_readw,
|
|
|
+ .read_b = esdhc_be_readb,
|
|
|
+ .write_l = esdhc_be_writel,
|
|
|
+ .write_w = esdhc_be_writew,
|
|
|
+ .write_b = esdhc_be_writeb,
|
|
|
+ .set_clock = esdhc_of_set_clock,
|
|
|
+ .enable_dma = esdhc_of_enable_dma,
|
|
|
+ .get_max_clock = esdhc_of_get_max_clock,
|
|
|
+ .get_min_clock = esdhc_of_get_min_clock,
|
|
|
+ .adma_workaround = esdhc_of_adma_workaround,
|
|
|
+ .set_bus_width = esdhc_pltfm_set_bus_width,
|
|
|
+ .reset = esdhc_reset,
|
|
|
+ .set_uhs_signaling = sdhci_set_uhs_signaling,
|
|
|
+};
|
|
|
+
|
|
|
+static const struct sdhci_ops sdhci_esdhc_le_ops = {
|
|
|
+ .read_l = esdhc_le_readl,
|
|
|
+ .read_w = esdhc_le_readw,
|
|
|
+ .read_b = esdhc_le_readb,
|
|
|
+ .write_l = esdhc_le_writel,
|
|
|
+ .write_w = esdhc_le_writew,
|
|
|
+ .write_b = esdhc_le_writeb,
|
|
|
+ .set_clock = esdhc_of_set_clock,
|
|
|
+ .enable_dma = esdhc_of_enable_dma,
|
|
|
+ .get_max_clock = esdhc_of_get_max_clock,
|
|
|
+ .get_min_clock = esdhc_of_get_min_clock,
|
|
|
+ .adma_workaround = esdhc_of_adma_workaround,
|
|
|
+ .set_bus_width = esdhc_pltfm_set_bus_width,
|
|
|
+ .reset = esdhc_reset,
|
|
|
+ .set_uhs_signaling = sdhci_set_uhs_signaling,
|
|
|
+};
|
|
|
+
|
|
|
+static const struct sdhci_pltfm_data sdhci_esdhc_be_pdata = {
|
|
|
+ .quirks = ESDHC_DEFAULT_QUIRKS | SDHCI_QUIRK_BROKEN_CARD_DETECTION
|
|
|
+ | SDHCI_QUIRK_NO_CARD_NO_RESET
|
|
|
+ | SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
|
|
|
+ .ops = &sdhci_esdhc_be_ops,
|
|
|
+};
|
|
|
+
|
|
|
+static const struct sdhci_pltfm_data sdhci_esdhc_le_pdata = {
|
|
|
.quirks = ESDHC_DEFAULT_QUIRKS | SDHCI_QUIRK_BROKEN_CARD_DETECTION
|
|
|
| SDHCI_QUIRK_NO_CARD_NO_RESET
|
|
|
| SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
|
|
|
- .ops = &sdhci_esdhc_ops,
|
|
|
+ .ops = &sdhci_esdhc_le_ops,
|
|
|
};
|
|
|
|
|
|
+static void esdhc_init(struct platform_device *pdev, struct sdhci_host *host)
|
|
|
+{
|
|
|
+ struct sdhci_pltfm_host *pltfm_host;
|
|
|
+ struct sdhci_esdhc *esdhc;
|
|
|
+ u16 host_ver;
|
|
|
+
|
|
|
+ pltfm_host = sdhci_priv(host);
|
|
|
+ esdhc = devm_kzalloc(&pdev->dev, sizeof(struct sdhci_esdhc),
|
|
|
+ GFP_KERNEL);
|
|
|
+
|
|
|
+ host_ver = sdhci_readw(host, SDHCI_HOST_VERSION);
|
|
|
+ esdhc->vendor_ver = (host_ver & SDHCI_VENDOR_VER_MASK) >>
|
|
|
+ SDHCI_VENDOR_VER_SHIFT;
|
|
|
+ esdhc->spec_ver = host_ver & SDHCI_SPEC_VER_MASK;
|
|
|
+
|
|
|
+ pltfm_host->priv = esdhc;
|
|
|
+}
|
|
|
+
|
|
|
static int sdhci_esdhc_probe(struct platform_device *pdev)
|
|
|
{
|
|
|
struct sdhci_host *host;
|
|
|
struct device_node *np;
|
|
|
int ret;
|
|
|
|
|
|
- host = sdhci_pltfm_init(pdev, &sdhci_esdhc_pdata, 0);
|
|
|
+ np = pdev->dev.of_node;
|
|
|
+
|
|
|
+ if (of_get_property(np, "little-endian", NULL))
|
|
|
+ host = sdhci_pltfm_init(pdev, &sdhci_esdhc_le_pdata, 0);
|
|
|
+ else
|
|
|
+ host = sdhci_pltfm_init(pdev, &sdhci_esdhc_be_pdata, 0);
|
|
|
+
|
|
|
if (IS_ERR(host))
|
|
|
return PTR_ERR(host);
|
|
|
|
|
|
+ esdhc_init(pdev, host);
|
|
|
+
|
|
|
sdhci_get_of_property(pdev);
|
|
|
|
|
|
- np = pdev->dev.of_node;
|
|
|
if (of_device_is_compatible(np, "fsl,p5040-esdhc") ||
|
|
|
of_device_is_compatible(np, "fsl,p5020-esdhc") ||
|
|
|
of_device_is_compatible(np, "fsl,p4080-esdhc") ||
|