Merge tag 'samsung-clk' of http://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/soc

Merge "Samsung clock updates for 3.16" from Kukjin Kim:

In this time, it is having dependency with arch/arm/ for 3.16,
I pulled them into samsung tree from Tomasz under agreement from Mike.

- Pull for_3.16/exynos5260 from Tomasz Figa:

  "This pull request contains patches preparing Samsung Common Clock Framework
  helpers to support Exynos5260 by adding support for multiple clock providers
  and then adding clock driver for Exynos5260."

- Pull for_3.16/clk_fixes_non_critical from Tomasz Figa:

  "This pull requests contains a number of non-critical fixes for Samsung clock
  framework and drivers, including:
  1) a series of fixes for Exynos5420 to correct clock definitions and make the
  driver closer to the documentation,
  2) several missing clocks and clock IDs added to Exynos4, Exynos5250 and
  Exynos5420 drivers,
  3) fix for incorrect initialization of clock table with NULL,
  4) compiler warning fix."

- Pull for_3.16/clk_cleanup from Tomasz Figa:

  "This pull requests contains minor clean-up related to Samsung clock
  support, including:
  1) move Kconfig entries of Samsung clock drivers to drivers/clk,
  2) compile drivers/clk/samsung conditionally when COMMON_CLK_SAMSUNG is
  selected,
  3) remove obsolete Kconfig lines after moving s3c24xx to CCF."

- Pull for_3.16/exynos3250 from Tomasz Figa:

  "This small pull request contains a patch adding clock driver for Exynos3250,
  which depends on previous pull requests in this series."

- add dt bindings for exynos3250 clock
- add exynos5800 specific clocks in current exynos5420 clock

Note that this branch is based on s3c24xx ccf branch

* tag 'samsung-clk' of http://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (59 commits)
  clk: exynos5420: Add 5800 specific clocks
  dt-bindings: add documentation for Exynos3250 clock controller
  ARM: S3C24XX: fix merge conflict
  clk: samsung: exynos3250: Add clocks using common clock framework
  drivers: clk: use COMMON_CLK_SAMSUNG for Samsung clock support
  ARM: S3C24XX: move S3C24XX clock Kconfig options to Samsung clock Kconfig file
  ARM: select COMMON_CLK_SAMSUNG for ARCH_EXYNOS and ARCH_S3C64XX
  clk: samsung: add new Kconfig for Samsung common clock option
  ARM: S3C24XX: Remove omitted Kconfig selects and conditionals
  clk: samsung: exynos5420: add more registers to restore list
  clk: samsung: exynos5420: add misc clocks
  clk: samsung: exynos5420: update clocks for MAU Block
  clk: samsung: exynos5420: fix register offset for sclk_bpll
  clk: samsung: exynos5420: correct sysmmu-mfc parent clocks
  clk: samsung: exynos5420: update clocks for FSYS and FSYS2 blocks
  clk: samsung: exynos5420: update clocks for WCORE block
  clk: samsung: exynos5420: update clocks for PERIS and GEN blocks
  clk: samsung: exynos5420: update clocks for PERIC block
  clk: samsung: exynos5420: update clocks for DISP1 block
  clk: samsung: exynos5420: update clocks for G2D and G3D blocks
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>

Documentation/devicetree/bindings/clock/exynos3250-clock.txt

@@ -0,0 +1,41 @@
+* Samsung Exynos3250 Clock Controller
+
+The Exynos3250 clock controller generates and supplies clock to various
+controllers within the Exynos3250 SoC.
+
+Required Properties:
+
+- compatible: should be one of the following.
+  - "samsung,exynos3250-cmu" - controller compatible with Exynos3250 SoC.
+
+- reg: physical base address of the controller and length of memory mapped
+  region.
+
+- #clock-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume.
+
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/exynos3250.h header and can be used in device
+tree sources.
+
+Example 1: An example of a clock controller node is listed below.
+
+	cmu: clock-controller@10030000 {
+		compatible = "samsung,exynos3250-cmu";
+		reg = <0x10030000 0x20000>;
+		#clock-cells = <1>;
+	};
+
+Example 2: UART controller node that consumes the clock generated by the clock
+	   controller. Refer to the standard clock bindings for information
+	   about 'clocks' and 'clock-names' property.
+
+	serial@13800000 {
+		compatible = "samsung,exynos4210-uart";
+		reg = <0x13800000 0x100>;
+		interrupts = <0 109 0>;
+		clocks = <&cmu CLK_UART0>, <&cmu CLK_SCLK_UART0>;
+		clock-names = "uart", "clk_uart_baud0";
+	};

Documentation/devicetree/bindings/clock/exynos5260-clock.txt

@@ -0,0 +1,190 @@
+* Samsung Exynos5260 Clock Controller
+
+Exynos5260 has 13 clock controllers which are instantiated
+independently from the device-tree. These clock controllers
+generate and supply clocks to various hardware blocks within
+the SoC.
+
+Each clock is assigned an identifier and client nodes can use
+this identifier to specify the clock which they consume. All
+available clocks are defined as preprocessor macros in
+dt-bindings/clock/exynos5260-clk.h header and can be used in
+device tree sources.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It
+is expected that they are defined using standard clock bindings
+with following clock-output-names:
+
+ - "fin_pll" - PLL input clock from XXTI
+ - "xrtcxti" - input clock from XRTCXTI
+ - "ioclk_pcm_extclk" - pcm external operation clock
+ - "ioclk_spdif_extclk" - spdif external operation clock
+ - "ioclk_i2s_cdclk" - i2s0 codec clock
+
+Phy clocks:
+
+There are several clocks which are generated by specific PHYs.
+These clocks are fed into the clock controller and then routed to
+the hardware blocks. These clocks are defined as fixed clocks in the
+driver with following names:
+
+ - "phyclk_dptx_phy_ch3_txd_clk" - dp phy clock for channel 3
+ - "phyclk_dptx_phy_ch2_txd_clk" - dp phy clock for channel 2
+ - "phyclk_dptx_phy_ch1_txd_clk" - dp phy clock for channel 1
+ - "phyclk_dptx_phy_ch0_txd_clk" - dp phy clock for channel 0
+ - "phyclk_hdmi_phy_tmds_clko" - hdmi phy tmds clock
+ - "phyclk_hdmi_phy_pixel_clko" - hdmi phy pixel clock
+ - "phyclk_hdmi_link_o_tmds_clkhi" - hdmi phy for hdmi link
+ - "phyclk_dptx_phy_o_ref_clk_24m" - dp phy reference clock
+ - "phyclk_dptx_phy_clk_div2"
+ - "phyclk_mipi_dphy_4l_m_rxclkesc0"
+ - "phyclk_usbhost20_phy_phyclock" - usb 2.0 phy clock
+ - "phyclk_usbhost20_phy_freeclk"
+ - "phyclk_usbhost20_phy_clk48mohci"
+ - "phyclk_usbdrd30_udrd30_pipe_pclk"
+ - "phyclk_usbdrd30_udrd30_phyclock" - usb 3.0 phy clock
+
+Required Properties for Clock Controller:
+
+ - compatible: should be one of the following.
+	1) "samsung,exynos5260-clock-top"
+	2) "samsung,exynos5260-clock-peri"
+	3) "samsung,exynos5260-clock-egl"
+	4) "samsung,exynos5260-clock-kfc"
+	5) "samsung,exynos5260-clock-g2d"
+	6) "samsung,exynos5260-clock-mif"
+	7) "samsung,exynos5260-clock-mfc"
+	8) "samsung,exynos5260-clock-g3d"
+	9) "samsung,exynos5260-clock-fsys"
+	10) "samsung,exynos5260-clock-aud"
+	11) "samsung,exynos5260-clock-isp"
+	12) "samsung,exynos5260-clock-gscl"
+	13) "samsung,exynos5260-clock-disp"
+
+ - reg: physical base address of the controller and the length of
+	memory mapped region.
+
+ - #clock-cells: should be 1.
+
+ - clocks: list of clock identifiers which are fed as the input to
+	the given clock controller. Please refer the next section to find
+	the input clocks for a given controller.
+
+ - clock-names: list of names of clocks which are fed as the input
+	to the given clock controller.
+
+Input clocks for top clock controller:
+	- fin_pll
+	- dout_mem_pll
+	- dout_bus_pll
+	- dout_media_pll
+
+Input clocks for peri clock controller:
+	- fin_pll
+	- ioclk_pcm_extclk
+	- ioclk_i2s_cdclk
+	- ioclk_spdif_extclk
+	- phyclk_hdmi_phy_ref_cko
+	- dout_aclk_peri_66
+	- dout_sclk_peri_uart0
+	- dout_sclk_peri_uart1
+	- dout_sclk_peri_uart2
+	- dout_sclk_peri_spi0_b
+	- dout_sclk_peri_spi1_b
+	- dout_sclk_peri_spi2_b
+	- dout_aclk_peri_aud
+	- dout_sclk_peri_spi0_b
+
+Input clocks for egl clock controller:
+	- fin_pll
+	- dout_bus_pll
+
+Input clocks for kfc clock controller:
+	- fin_pll
+	- dout_media_pll
+
+Input clocks for g2d clock controller:
+	- fin_pll
+	- dout_aclk_g2d_333
+
+Input clocks for mif clock controller:
+	- fin_pll
+
+Input clocks for mfc clock controller:
+	- fin_pll
+	- dout_aclk_mfc_333
+
+Input clocks for g3d clock controller:
+	- fin_pll
+
+Input clocks for fsys clock controller:
+	- fin_pll
+	- phyclk_usbhost20_phy_phyclock
+	- phyclk_usbhost20_phy_freeclk
+	- phyclk_usbhost20_phy_clk48mohci
+	- phyclk_usbdrd30_udrd30_pipe_pclk
+	- phyclk_usbdrd30_udrd30_phyclock
+	- dout_aclk_fsys_200
+
+Input clocks for aud clock controller:
+	- fin_pll
+	- fout_aud_pll
+	- ioclk_i2s_cdclk
+	- ioclk_pcm_extclk
+
+Input clocks for isp clock controller:
+	- fin_pll
+	- dout_aclk_isp1_266
+	- dout_aclk_isp1_400
+	- mout_aclk_isp1_266
+
+Input clocks for gscl clock controller:
+	- fin_pll
+	- dout_aclk_gscl_400
+	- dout_aclk_gscl_333
+
+Input clocks for disp clock controller:
+	- fin_pll
+	- phyclk_dptx_phy_ch3_txd_clk
+	- phyclk_dptx_phy_ch2_txd_clk
+	- phyclk_dptx_phy_ch1_txd_clk
+	- phyclk_dptx_phy_ch0_txd_clk
+	- phyclk_hdmi_phy_tmds_clko
+	- phyclk_hdmi_phy_ref_clko
+	- phyclk_hdmi_phy_pixel_clko
+	- phyclk_hdmi_link_o_tmds_clkhi
+	- phyclk_mipi_dphy_4l_m_txbyte_clkhs
+	- phyclk_dptx_phy_o_ref_clk_24m
+	- phyclk_dptx_phy_clk_div2
+	- phyclk_mipi_dphy_4l_m_rxclkesc0
+	- phyclk_hdmi_phy_ref_cko
+	- ioclk_spdif_extclk
+	- dout_aclk_peri_aud
+	- dout_aclk_disp_222
+	- dout_sclk_disp_pixel
+	- dout_aclk_disp_333
+
+Example 1: An example of a clock controller node is listed below.
+
+	clock_mfc: clock-controller@11090000 {
+		compatible = "samsung,exynos5260-clock-mfc";
+		clock = <&fin_pll>, <&clock_top TOP_DOUT_ACLK_MFC_333>;
+		clock-names = "fin_pll", "dout_aclk_mfc_333";
+		reg = <0x11090000 0x10000>;
+		#clock-cells = <1>;
+	};
+
+Example 2: UART controller node that consumes the clock generated by the
+		peri clock controller. Refer to the standard clock bindings for
+		information about 'clocks' and 'clock-names' property.
+
+	serial@12C00000 {
+		compatible = "samsung,exynos4210-uart";
+		reg = <0x12C00000 0x100>;
+		interrupts = <0 146 0>;
+		clocks = <&clock_peri PERI_PCLK_UART0>, <&clock_peri PERI_SCLK_UART0>;
+		clock-names = "uart", "clk_uart_baud0";
+	};
+

Documentation/devicetree/bindings/clock/exynos5420-clock.txt

@@ -1,12 +1,13 @@
 * Samsung Exynos5420 Clock Controller
 
 The Exynos5420 clock controller generates and supplies clock to various
-controllers within the Exynos5420 SoC.
+controllers within the Exynos5420 SoC and for the Exynos5800 SoC.
 
 Required Properties:
 
 - compatible: should be one of the following.
   - "samsung,exynos5420-clock" - controller compatible with Exynos5420 SoC.
+  - "samsung,exynos5800-clock" - controller compatible with Exynos5800 SoC.
 
 - reg: physical base address of the controller and length of memory mapped
   region.

Documentation/devicetree/bindings/clock/samsung,s3c2410-clock.txt

@@ -0,0 +1,50 @@
+* Samsung S3C2410 Clock Controller
+
+The S3C2410 clock controller generates and supplies clock to various controllers
+within the SoC. The clock binding described here is applicable to the s3c2410,
+s3c2440 and s3c2442 SoCs in the s3c24x family.
+
+Required Properties:
+
+- compatible: should be one of the following.
+  - "samsung,s3c2410-clock" - controller compatible with S3C2410 SoC.
+  - "samsung,s3c2440-clock" - controller compatible with S3C2440 SoC.
+  - "samsung,s3c2442-clock" - controller compatible with S3C2442 SoC.
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- #clock-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. Some of the clocks are available only
+on a particular SoC.
+
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/s3c2410.h header and can be used in device
+tree sources.
+
+External clocks:
+
+The xti clock used as input for the plls is generated outside the SoC. It is
+expected that is are defined using standard clock bindings with a
+clock-output-names value of "xti".
+
+Example: Clock controller node:
+
+	clocks: clock-controller@4c000000 {
+		compatible = "samsung,s3c2410-clock";
+		reg = <0x4c000000 0x20>;
+		#clock-cells = <1>;
+	};
+
+Example: UART controller node that consumes the clock generated by the clock
+  controller (refer to the standard clock bindings for information about
+  "clocks" and "clock-names" properties):
+
+	serial@50004000 {
+		compatible = "samsung,s3c2440-uart";
+		reg = <0x50004000 0x4000>;
+		interrupts = <1 23 3 4>, <1 23 4 4>;
+		clock-names = "uart", "clk_uart_baud2";
+		clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>;
+		status = "disabled";
+	};

Documentation/devicetree/bindings/clock/samsung,s3c2412-clock.txt

@@ -0,0 +1,50 @@
+* Samsung S3C2412 Clock Controller
+
+The S3C2412 clock controller generates and supplies clock to various controllers
+within the SoC. The clock binding described here is applicable to the s3c2412
+and s3c2413 SoCs in the s3c24x family.
+
+Required Properties:
+
+- compatible: should be "samsung,s3c2412-clock"
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- #clock-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. Some of the clocks are available only
+on a particular SoC.
+
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/s3c2412.h header and can be used in device
+tree sources.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It is expected
+that they are defined using standard clock bindings with following
+clock-output-names:
+ - "xti" - crystal input - required,
+ - "ext" - external clock source - optional,
+
+Example: Clock controller node:
+
+	clocks: clock-controller@4c000000 {
+		compatible = "samsung,s3c2412-clock";
+		reg = <0x4c000000 0x20>;
+		#clock-cells = <1>;
+	};
+
+Example: UART controller node that consumes the clock generated by the clock
+  controller (refer to the standard clock bindings for information about
+  "clocks" and "clock-names" properties):
+
+	serial@50004000 {
+		compatible = "samsung,s3c2412-uart";
+		reg = <0x50004000 0x4000>;
+		interrupts = <1 23 3 4>, <1 23 4 4>;
+		clock-names = "uart", "clk_uart_baud2", "clk_uart_baud3";
+		clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>,
+			 <&clocks SCLK_UART>;
+		status = "disabled";
+	};

Documentation/devicetree/bindings/clock/samsung,s3c2443-clock.txt

@@ -0,0 +1,56 @@
+* Samsung S3C2443 Clock Controller
+
+The S3C2443 clock controller generates and supplies clock to various controllers
+within the SoC. The clock binding described here is applicable to all SoCs in
+the s3c24x family starting with the s3c2443.
+
+Required Properties:
+
+- compatible: should be one of the following.
+  - "samsung,s3c2416-clock" - controller compatible with S3C2416 SoC.
+  - "samsung,s3c2443-clock" - controller compatible with S3C2443 SoC.
+  - "samsung,s3c2450-clock" - controller compatible with S3C2450 SoC.
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- #clock-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. Some of the clocks are available only
+on a particular SoC.
+
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/s3c2443.h header and can be used in device
+tree sources.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It is expected
+that they are defined using standard clock bindings with following
+clock-output-names:
+ - "xti" - crystal input - required,
+ - "ext" - external clock source - optional,
+ - "ext_i2s" - external I2S clock - optional,
+ - "ext_uart" - external uart clock - optional,
+
+Example: Clock controller node:
+
+	clocks: clock-controller@4c000000 {
+		compatible = "samsung,s3c2416-clock";
+		reg = <0x4c000000 0x40>;
+		#clock-cells = <1>;
+	};
+
+Example: UART controller node that consumes the clock generated by the clock
+  controller (refer to the standard clock bindings for information about
+  "clocks" and "clock-names" properties):
+
+	serial@50004000 {
+		compatible = "samsung,s3c2440-uart";
+		reg = <0x50004000 0x4000>;
+		interrupts = <1 23 3 4>, <1 23 4 4>;
+		clock-names = "uart", "clk_uart_baud2",
+				"clk_uart_baud3";
+		clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>,
+				<&clocks SCLK_UART>;
+		status = "disabled";
+	};

arch/arm/Kconfig

@@ -754,7 +754,7 @@ config ARCH_S3C64XX
 	select ATAGS
 	select CLKDEV_LOOKUP
 	select CLKSRC_SAMSUNG_PWM
-	select COMMON_CLK
+	select COMMON_CLK_SAMSUNG
 	select CPU_V6K
 	select GENERIC_CLOCKEVENTS
 	select GPIO_SAMSUNG
@@ -835,7 +835,7 @@ config ARCH_EXYNOS
 	select ARCH_REQUIRE_GPIOLIB
 	select ARCH_SPARSEMEM_ENABLE
 	select ARM_GIC
-	select COMMON_CLK
+	select COMMON_CLK_SAMSUNG
 	select CPU_V7
 	select GENERIC_CLOCKEVENTS
 	select HAVE_S3C2410_I2C if I2C

arch/arm/boot/dts/exynos5420.dtsi

@@ -594,7 +594,7 @@
 		#size-cells = <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c4_hs_bus>;
-		clocks = <&clock CLK_I2C4>;
+		clocks = <&clock CLK_USI0>;
 		clock-names = "hsi2c";
 		status = "disabled";
 	};
@@ -607,7 +607,7 @@
 		#size-cells = <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c5_hs_bus>;
-		clocks = <&clock CLK_I2C5>;
+		clocks = <&clock CLK_USI1>;
 		clock-names = "hsi2c";
 		status = "disabled";
 	};
@@ -620,7 +620,7 @@
 		#size-cells = <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c6_hs_bus>;
-		clocks = <&clock CLK_I2C6>;
+		clocks = <&clock CLK_USI2>;
 		clock-names = "hsi2c";
 		status = "disabled";
 	};
@@ -633,7 +633,7 @@
 		#size-cells = <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c7_hs_bus>;
-		clocks = <&clock CLK_I2C7>;
+		clocks = <&clock CLK_USI3>;
 		clock-names = "hsi2c";
 		status = "disabled";
 	};
@@ -646,7 +646,7 @@
 		#size-cells = <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c8_hs_bus>;
-		clocks = <&clock CLK_I2C8>;
+		clocks = <&clock CLK_USI4>;
 		clock-names = "hsi2c";
 		status = "disabled";
 	};
@@ -659,7 +659,7 @@
 		#size-cells = <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c9_hs_bus>;
-		clocks = <&clock CLK_I2C9>;
+		clocks = <&clock CLK_USI5>;
 		clock-names = "hsi2c";
 		status = "disabled";
 	};
@@ -672,7 +672,7 @@
 		#size-cells = <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c10_hs_bus>;
-		clocks = <&clock CLK_I2C10>;
+		clocks = <&clock CLK_USI6>;
 		clock-names = "hsi2c";
 		status = "disabled";
 	};

arch/arm/boot/dts/s3c2416-smdk2416.dts

@@ -19,6 +19,19 @@
 		reg =  <0x30000000 0x4000000>;
 	};
 
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		xti: xti {
+			compatible = "fixed-clock";
+			clock-frequency = <12000000>;
+			clock-output-names = "xti";
+			#clock-cells = <0>;
+		};
+	};
+
 	serial@50000000 {
 		status = "okay";
 		pinctrl-names = "default";

arch/arm/boot/dts/s3c2416.dtsi

@@ -8,6 +8,7 @@
  * published by the Free Software Foundation.
  */
 
+#include <dt-bindings/clock/s3c2443.h>
 #include "s3c24xx.dtsi"
 #include "s3c2416-pinctrl.dtsi"
 
@@ -28,26 +29,53 @@
 		compatible = "samsung,s3c2416-irq";
 	};
 
+	clocks: clock-controller@0x4c000000 {
+		compatible = "samsung,s3c2416-clock";
+		reg = <0x4c000000 0x40>;
+		#clock-cells = <1>;
+	};
+
 	pinctrl@56000000 {
 		compatible = "samsung,s3c2416-pinctrl";
 	};
 
+	timer@51000000 {
+		clocks = <&clocks PCLK_PWM>;
+		clock-names = "timers";
+	};
+
 	serial@50000000 {
 		compatible = "samsung,s3c2440-uart";
+		clock-names = "uart", "clk_uart_baud2",
+				"clk_uart_baud3";
+		clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>,
+				<&clocks SCLK_UART>;
 	};
 
 	serial@50004000 {
 		compatible = "samsung,s3c2440-uart";
+		clock-names = "uart", "clk_uart_baud2",
+				"clk_uart_baud3";
+		clocks = <&clocks PCLK_UART1>, <&clocks PCLK_UART1>,
+				<&clocks SCLK_UART>;
 	};
 
 	serial@50008000 {
 		compatible = "samsung,s3c2440-uart";
+		clock-names = "uart", "clk_uart_baud2",
+				"clk_uart_baud3";
+		clocks = <&clocks PCLK_UART2>, <&clocks PCLK_UART2>,
+				<&clocks SCLK_UART>;
 	};
 
 	serial@5000C000 {
 		compatible = "samsung,s3c2440-uart";
 		reg = <0x5000C000 0x4000>;
 		interrupts = <1 18 24 4>, <1 18 25 4>;
+		clock-names = "uart", "clk_uart_baud2",
+				"clk_uart_baud3";
+		clocks = <&clocks PCLK_UART3>, <&clocks PCLK_UART3>,
+				<&clocks SCLK_UART>;
 		status = "disabled";
 	};
 
@@ -55,6 +83,10 @@
 		compatible = "samsung,s3c6410-sdhci";
 		reg = <0x4AC00000 0x100>;
 		interrupts = <0 0 21 3>;
+		clock-names = "hsmmc", "mmc_busclk.0",
+				"mmc_busclk.2";
+		clocks = <&clocks HCLK_HSMMC0>, <&clocks HCLK_HSMMC0>,
+				<&clocks MUX_HSMMC0>;
 		status = "disabled";
 	};
 
@@ -62,18 +94,28 @@
 		compatible = "samsung,s3c6410-sdhci";
 		reg = <0x4A800000 0x100>;
 		interrupts = <0 0 20 3>;
+		clock-names = "hsmmc", "mmc_busclk.0",
+				"mmc_busclk.2";
+		clocks = <&clocks HCLK_HSMMC1>, <&clocks HCLK_HSMMC1>,
+				<&clocks MUX_HSMMC1>;
 		status = "disabled";
 	};
 
 	watchdog@53000000 {
 		interrupts = <1 9 27 3>;
+		clocks = <&clocks PCLK_WDT>;
+		clock-names = "watchdog";
 	};
 
 	rtc@57000000 {
 		compatible = "samsung,s3c2416-rtc";
+		clocks = <&clocks PCLK_RTC>;
+		clock-names = "rtc";
 	};
 
 	i2c@54000000 {
 		compatible = "samsung,s3c2440-i2c";
+		clocks = <&clocks PCLK_I2C0>;
+		clock-names = "i2c";
 	};
 };

arch/arm/mach-s3c24xx/Kconfig

@@ -18,6 +18,8 @@ config PLAT_S3C24XX
 	help
 	  Base platform code for any Samsung S3C24XX device
 
+
+
 menu "SAMSUNG S3C24XX SoCs Support"
 
 comment "S3C24XX SoCs"
@@ -27,7 +29,7 @@ config CPU_S3C2410
 	default y
 	select CPU_ARM920T
 	select CPU_LLSERIAL_S3C2410
-	select S3C2410_CLOCK
+	select S3C2410_COMMON_CLK
 	select S3C2410_DMA if S3C24XX_DMA
 	select ARM_S3C2410_CPUFREQ if ARM_S3C24XX_CPUFREQ
 	select S3C2410_PM if PM
@@ -40,6 +42,7 @@ config CPU_S3C2412
 	bool "SAMSUNG S3C2412"
 	select CPU_ARM926T
 	select CPU_LLSERIAL_S3C2440
+	select S3C2412_COMMON_CLK
 	select S3C2412_DMA if S3C24XX_DMA
 	select S3C2412_PM if PM
 	help
@@ -50,9 +53,8 @@ config CPU_S3C2416
 	select CPU_ARM926T
 	select CPU_LLSERIAL_S3C2440
 	select S3C2416_PM if PM
-	select S3C2443_COMMON
+	select S3C2443_COMMON_CLK
 	select S3C2443_DMA if S3C24XX_DMA
-	select SAMSUNG_CLKSRC
 	help
 	  Support for the S3C2416 SoC from the S3C24XX line
 
@@ -60,7 +62,7 @@ config CPU_S3C2440
 	bool "SAMSUNG S3C2440"
 	select CPU_ARM920T
 	select CPU_LLSERIAL_S3C2440
-	select S3C2410_CLOCK
+	select S3C2410_COMMON_CLK
 	select S3C2410_PM if PM
 	select S3C2440_DMA if S3C24XX_DMA
 	help
@@ -70,7 +72,7 @@ config CPU_S3C2442
 	bool "SAMSUNG S3C2442"
 	select CPU_ARM920T
 	select CPU_LLSERIAL_S3C2440
-	select S3C2410_CLOCK
+	select S3C2410_COMMON_CLK
 	select S3C2410_DMA if S3C24XX_DMA
 	select S3C2410_PM if PM
 	help
@@ -85,25 +87,13 @@ config CPU_S3C2443
 	bool "SAMSUNG S3C2443"
 	select CPU_ARM920T
 	select CPU_LLSERIAL_S3C2440
-	select S3C2443_COMMON
+	select S3C2443_COMMON_CLK
 	select S3C2443_DMA if S3C24XX_DMA
-	select SAMSUNG_CLKSRC
 	help
 	  Support for the S3C2443 SoC from the S3C24XX line
 
 # common code
 
-config S3C2410_CLOCK
-	bool
-	help
-	  Clock code for the S3C2410, and similar processors which
-	  is currently includes the S3C2410, S3C2440, S3C2442.
-
-config S3C24XX_DCLK
-	bool
-	help
-	  Clock code for supporting DCLK/CLKOUT on S3C24XX architectures
-
 config S3C24XX_SMDK
 	bool
 	help
@@ -258,8 +248,8 @@ config ARCH_BAST
 	bool "Simtec Electronics BAST (EB2410ITX)"
 	select ISA
 	select MACH_BAST_IDE
+	select S3C2410_COMMON_DCLK
 	select S3C2410_IOTIMING if ARM_S3C2410_CPUFREQ
-	select S3C24XX_DCLK
 	select S3C24XX_SIMTEC_NOR
 	select S3C24XX_SIMTEC_PM if PM
 	select S3C24XX_SIMTEC_USB
@@ -340,7 +330,7 @@ config MACH_TCT_HAMMER
 config MACH_VR1000
 	bool "Thorcom VR1000"
 	select MACH_BAST_IDE
-	select S3C24XX_DCLK
+	select S3C2410_COMMON_DCLK
 	select S3C24XX_SIMTEC_NOR
 	select S3C24XX_SIMTEC_PM if PM
 	select S3C24XX_SIMTEC_USB
@@ -519,8 +509,8 @@ comment "S3C2440 Boards"
 config MACH_ANUBIS
 	bool "Simtec Electronics ANUBIS"
 	select HAVE_PATA_PLATFORM
+	select S3C2410_COMMON_DCLK
 	select S3C2440_XTAL_12000000
-	select S3C24XX_DCLK
 	select S3C24XX_SIMTEC_PM if PM
 	select S3C_DEV_USB_HOST
 	help
@@ -558,9 +548,9 @@ config MACH_NEXCODER_2440
 
 config MACH_OSIRIS
 	bool "Simtec IM2440D20 (OSIRIS) module"
+	select S3C2410_COMMON_DCLK
 	select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ
 	select S3C2440_XTAL_12000000
-	select S3C24XX_DCLK
 	select S3C24XX_SIMTEC_PM if PM
 	select S3C_DEV_NAND
 	select S3C_DEV_USB_HOST
@@ -629,9 +619,9 @@ config MACH_RX1950
 	bool "HP iPAQ rx1950"
 	select I2C
 	select PM_H1940 if PM
+	select S3C2410_COMMON_DCLK
 	select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ
 	select S3C2440_XTAL_16934400
-	select S3C24XX_DCLK
 	select S3C24XX_PWM
 	select S3C_DEV_NAND
 	help
@@ -641,12 +631,6 @@ endif	# CPU_S3C2442
 
 if CPU_S3C2443 || CPU_S3C2416
 
-config S3C2443_COMMON
-	bool
-	help
-	  Common code for the S3C2443 and similar processors, which includes
-	  the S3C2416 and S3C2450.
-
 config S3C2443_DMA
 	bool
 	help

arch/arm/mach-s3c24xx/Makefile

@@ -21,22 +21,22 @@ obj-$(CONFIG_S3C2410_DMA)	+= dma-s3c2410.o
 obj-$(CONFIG_S3C2410_PLL)	+= pll-s3c2410.o
 obj-$(CONFIG_S3C2410_PM)	+= pm-s3c2410.o sleep-s3c2410.o
 
-obj-$(CONFIG_CPU_S3C2412)	+= s3c2412.o clock-s3c2412.o
+obj-$(CONFIG_CPU_S3C2412)	+= s3c2412.o
 obj-$(CONFIG_S3C2412_DMA)	+= dma-s3c2412.o
 obj-$(CONFIG_S3C2412_PM)	+= pm-s3c2412.o
 obj-$(CONFIG_S3C2412_PM_SLEEP)	+= sleep-s3c2412.o
 
-obj-$(CONFIG_CPU_S3C2416)	+= s3c2416.o clock-s3c2416.o
+obj-$(CONFIG_CPU_S3C2416)	+= s3c2416.o
 obj-$(CONFIG_S3C2416_PM)	+= pm-s3c2416.o
 
-obj-$(CONFIG_CPU_S3C2440)	+= s3c2440.o clock-s3c2440.o
+obj-$(CONFIG_CPU_S3C2440)	+= s3c2440.o
 obj-$(CONFIG_CPU_S3C2442)	+= s3c2442.o
-obj-$(CONFIG_CPU_S3C244X)	+= s3c244x.o clock-s3c244x.o
+obj-$(CONFIG_CPU_S3C244X)	+= s3c244x.o
 obj-$(CONFIG_S3C2440_DMA)	+= dma-s3c2440.o
 obj-$(CONFIG_S3C2440_PLL_12000000) += pll-s3c2440-12000000.o
 obj-$(CONFIG_S3C2440_PLL_16934400) += pll-s3c2440-16934400.o
 
-obj-$(CONFIG_CPU_S3C2443)	+= s3c2443.o clock-s3c2443.o
+obj-$(CONFIG_CPU_S3C2443)	+= s3c2443.o
 
 # PM
 
@@ -44,16 +44,13 @@ obj-$(CONFIG_PM)		+= pm.o irq-pm.o sleep.o
 
 # common code
 
-obj-$(CONFIG_S3C24XX_DCLK)	+= clock-dclk.o
 obj-$(CONFIG_S3C24XX_DMA)	+= dma.o
 
-obj-$(CONFIG_S3C2410_CLOCK)	+= clock-s3c2410.o
 obj-$(CONFIG_S3C2410_CPUFREQ_UTILS) += cpufreq-utils.o
 
 obj-$(CONFIG_S3C2410_IOTIMING)	+= iotiming-s3c2410.o
 obj-$(CONFIG_S3C2412_IOTIMING)	+= iotiming-s3c2412.o
 
-obj-$(CONFIG_S3C2443_COMMON)	+= common-s3c2443.o
 obj-$(CONFIG_S3C2443_DMA)	+= dma-s3c2443.o
 
 #

arch/arm/mach-s3c24xx/clock-dclk.c

@@ -1,195 +0,0 @@
-/*
- * Copyright (c) 2004-2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C24XX - definitions for DCLK and CLKOUT registers
- */
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <mach/regs-clock.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/clock.h>
-#include <plat/cpu.h>
-
-/* clocks that could be registered by external code */
-
-static int s3c24xx_dclk_enable(struct clk *clk, int enable)
-{
-	unsigned long dclkcon = __raw_readl(S3C24XX_DCLKCON);
-
-	if (enable)
-		dclkcon |= clk->ctrlbit;
-	else
-		dclkcon &= ~clk->ctrlbit;
-
-	__raw_writel(dclkcon, S3C24XX_DCLKCON);
-
-	return 0;
-}
-
-static int s3c24xx_dclk_setparent(struct clk *clk, struct clk *parent)
-{
-	unsigned long dclkcon;
-	unsigned int uclk;
-
-	if (parent == &clk_upll)
-		uclk = 1;
-	else if (parent == &clk_p)
-		uclk = 0;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	dclkcon = __raw_readl(S3C24XX_DCLKCON);
-
-	if (clk->ctrlbit == S3C2410_DCLKCON_DCLK0EN) {
-		if (uclk)
-			dclkcon |= S3C2410_DCLKCON_DCLK0_UCLK;
-		else
-			dclkcon &= ~S3C2410_DCLKCON_DCLK0_UCLK;
-	} else {
-		if (uclk)
-			dclkcon |= S3C2410_DCLKCON_DCLK1_UCLK;
-		else
-			dclkcon &= ~S3C2410_DCLKCON_DCLK1_UCLK;
-	}
-
-	__raw_writel(dclkcon, S3C24XX_DCLKCON);
-
-	return 0;
-}
-static unsigned long s3c24xx_calc_div(struct clk *clk, unsigned long rate)
-{
-	unsigned long div;
-
-	if ((rate == 0) || !clk->parent)
-		return 0;
-
-	div = clk_get_rate(clk->parent) / rate;
-	if (div < 2)
-		div = 2;
-	else if (div > 16)
-		div = 16;
-
-	return div;
-}
-
-static unsigned long s3c24xx_round_dclk_rate(struct clk *clk,
-	unsigned long rate)
-{
-	unsigned long div = s3c24xx_calc_div(clk, rate);
-
-	if (div == 0)
-		return 0;
-
-	return clk_get_rate(clk->parent) / div;
-}
-
-static int s3c24xx_set_dclk_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned long mask, data, div = s3c24xx_calc_div(clk, rate);
-
-	if (div == 0)
-		return -EINVAL;
-
-	if (clk == &s3c24xx_dclk0) {
-		mask = S3C2410_DCLKCON_DCLK0_DIV_MASK |
-			S3C2410_DCLKCON_DCLK0_CMP_MASK;
-		data = S3C2410_DCLKCON_DCLK0_DIV(div) |
-			S3C2410_DCLKCON_DCLK0_CMP((div + 1) / 2);
-	} else if (clk == &s3c24xx_dclk1) {
-		mask = S3C2410_DCLKCON_DCLK1_DIV_MASK |
-			S3C2410_DCLKCON_DCLK1_CMP_MASK;
-		data = S3C2410_DCLKCON_DCLK1_DIV(div) |
-			S3C2410_DCLKCON_DCLK1_CMP((div + 1) / 2);
-	} else
-		return -EINVAL;
-
-	clk->rate = clk_get_rate(clk->parent) / div;
-	__raw_writel(((__raw_readl(S3C24XX_DCLKCON) & ~mask) | data),
-		S3C24XX_DCLKCON);
-	return clk->rate;
-}
-static int s3c24xx_clkout_setparent(struct clk *clk, struct clk *parent)
-{
-	unsigned long mask;
-	unsigned long source;
-
-	/* calculate the MISCCR setting for the clock */
-
-	if (parent == &clk_mpll)
-		source = S3C2410_MISCCR_CLK0_MPLL;
-	else if (parent == &clk_upll)
-		source = S3C2410_MISCCR_CLK0_UPLL;
-	else if (parent == &clk_f)
-		source = S3C2410_MISCCR_CLK0_FCLK;
-	else if (parent == &clk_h)
-		source = S3C2410_MISCCR_CLK0_HCLK;
-	else if (parent == &clk_p)
-		source = S3C2410_MISCCR_CLK0_PCLK;
-	else if (clk == &s3c24xx_clkout0 && parent == &s3c24xx_dclk0)
-		source = S3C2410_MISCCR_CLK0_DCLK0;
-	else if (clk == &s3c24xx_clkout1 && parent == &s3c24xx_dclk1)
-		source = S3C2410_MISCCR_CLK0_DCLK0;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	if (clk == &s3c24xx_clkout0)
-		mask = S3C2410_MISCCR_CLK0_MASK;
-	else {
-		source <<= 4;
-		mask = S3C2410_MISCCR_CLK1_MASK;
-	}
-
-	s3c2410_modify_misccr(mask, source);
-	return 0;
-}
-
-/* external clock definitions */
-
-static struct clk_ops dclk_ops = {
-	.set_parent	= s3c24xx_dclk_setparent,
-	.set_rate	= s3c24xx_set_dclk_rate,
-	.round_rate	= s3c24xx_round_dclk_rate,
-};
-
-struct clk s3c24xx_dclk0 = {
-	.name		= "dclk0",
-	.ctrlbit	= S3C2410_DCLKCON_DCLK0EN,
-	.enable	        = s3c24xx_dclk_enable,
-	.ops		= &dclk_ops,
-};
-
-struct clk s3c24xx_dclk1 = {
-	.name		= "dclk1",
-	.ctrlbit	= S3C2410_DCLKCON_DCLK1EN,
-	.enable		= s3c24xx_dclk_enable,
-	.ops		= &dclk_ops,
-};
-
-static struct clk_ops clkout_ops = {
-	.set_parent	= s3c24xx_clkout_setparent,
-};
-
-struct clk s3c24xx_clkout0 = {
-	.name		= "clkout0",
-	.ops		= &clkout_ops,
-};
-
-struct clk s3c24xx_clkout1 = {
-	.name		= "clkout1",
-	.ops		= &clkout_ops,
-};

arch/arm/mach-s3c24xx/clock-s3c2410.c

@@ -1,284 +0,0 @@
-/*
- * Copyright (c) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410,S3C2440,S3C2442 Clock control support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/device.h>
-#include <linux/clk.h>
-#include <linux/mutex.h>
-#include <linux/delay.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/io.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
-#include <mach/regs-clock.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/clock.h>
-#include <plat/cpu.h>
-
-int s3c2410_clkcon_enable(struct clk *clk, int enable)
-{
-	unsigned int clocks = clk->ctrlbit;
-	unsigned long clkcon;
-
-	clkcon = __raw_readl(S3C2410_CLKCON);
-
-	if (enable)
-		clkcon |= clocks;
-	else
-		clkcon &= ~clocks;
-
-	/* ensure none of the special function bits set */
-	clkcon &= ~(S3C2410_CLKCON_IDLE|S3C2410_CLKCON_POWER);
-
-	__raw_writel(clkcon, S3C2410_CLKCON);
-
-	return 0;
-}
-
-static int s3c2410_upll_enable(struct clk *clk, int enable)
-{
-	unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW);
-	unsigned long orig = clkslow;
-
-	if (enable)
-		clkslow &= ~S3C2410_CLKSLOW_UCLK_OFF;
-	else
-		clkslow |= S3C2410_CLKSLOW_UCLK_OFF;
-
-	__raw_writel(clkslow, S3C2410_CLKSLOW);
-
-	/* if we started the UPLL, then allow to settle */
-
-	if (enable && (orig & S3C2410_CLKSLOW_UCLK_OFF))
-		udelay(200);
-
-	return 0;
-}
-
-/* standard clock definitions */
-
-static struct clk init_clocks_off[] = {
-	{
-		.name		= "nand",
-		.parent		= &clk_h,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_NAND,
-	}, {
-		.name		= "sdi",
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_SDI,
-	}, {
-		.name		= "adc",
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_ADC,
-	}, {
-		.name		= "i2c",
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_IIC,
-	}, {
-		.name		= "iis",
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_IIS,
-	}, {
-		.name		= "spi",
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_SPI,
-	}
-};
-
-static struct clk clk_lcd = {
-	.name		= "lcd",
-	.parent		= &clk_h,
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2410_CLKCON_LCDC,
-};
-
-static struct clk clk_gpio = {
-	.name		= "gpio",
-	.parent		= &clk_p,
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2410_CLKCON_GPIO,
-};
-
-static struct clk clk_usb_host = {
-	.name		= "usb-host",
-	.parent		= &clk_h,
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2410_CLKCON_USBH,
-};
-
-static struct clk clk_usb_device = {
-	.name		= "usb-device",
-	.parent		= &clk_h,
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2410_CLKCON_USBD,
-};
-
-static struct clk clk_timers = {
-	.name		= "timers",
-	.parent		= &clk_p,
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2410_CLKCON_PWMT,
-};
-
-struct clk s3c24xx_clk_uart0 = {
-	.name		= "uart",
-	.devname	= "s3c2410-uart.0",
-	.parent		= &clk_p,
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2410_CLKCON_UART0,
-};
-
-struct clk s3c24xx_clk_uart1 = {
-	.name		= "uart",
-	.devname	= "s3c2410-uart.1",
-	.parent		= &clk_p,
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2410_CLKCON_UART1,
-};
-
-struct clk s3c24xx_clk_uart2 = {
-	.name		= "uart",
-	.devname	= "s3c2410-uart.2",
-	.parent		= &clk_p,
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2410_CLKCON_UART2,
-};
-
-static struct clk clk_rtc = {
-	.name		= "rtc",
-	.parent		= &clk_p,
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2410_CLKCON_RTC,
-};
-
-static struct clk clk_watchdog = {
-	.name		= "watchdog",
-	.parent		= &clk_p,
-	.ctrlbit	= 0,
-};
-
-static struct clk clk_usb_bus_host = {
-	.name		= "usb-bus-host",
-	.parent		= &clk_usb_bus,
-};
-
-static struct clk clk_usb_bus_gadget = {
-	.name		= "usb-bus-gadget",
-	.parent		= &clk_usb_bus,
-};
-
-static struct clk *init_clocks[] = {
-	&clk_lcd,
-	&clk_gpio,
-	&clk_usb_host,
-	&clk_usb_device,
-	&clk_timers,
-	&s3c24xx_clk_uart0,
-	&s3c24xx_clk_uart1,
-	&s3c24xx_clk_uart2,
-	&clk_rtc,
-	&clk_watchdog,
-	&clk_usb_bus_host,
-	&clk_usb_bus_gadget,
-};
-
-/* s3c2410_baseclk_add()
- *
- * Add all the clocks used by the s3c2410 or compatible CPUs
- * such as the S3C2440 and S3C2442.
- *
- * We cannot use a system device as we are needed before any
- * of the init-calls that initialise the devices are actually
- * done.
-*/
-
-int __init s3c2410_baseclk_add(void)
-{
-	unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW);
-	unsigned long clkcon  = __raw_readl(S3C2410_CLKCON);
-	struct clk *xtal;
-	int ret;
-	int ptr;
-
-	clk_upll.enable = s3c2410_upll_enable;
-
-	if (s3c24xx_register_clock(&clk_usb_bus) < 0)
-		printk(KERN_ERR "failed to register usb bus clock\n");
-
-	/* register clocks from clock array */
-
-	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++) {
-		struct clk *clkp = init_clocks[ptr];
-
-		/* ensure that we note the clock state */
-
-		clkp->usage = clkcon & clkp->ctrlbit ? 1 : 0;
-
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-	}
-
-	/* We must be careful disabling the clocks we are not intending to
-	 * be using at boot time, as subsystems such as the LCD which do
-	 * their own DMA requests to the bus can cause the system to lockup
-	 * if they where in the middle of requesting bus access.
-	 *
-	 * Disabling the LCD clock if the LCD is active is very dangerous,
-	 * and therefore the bootloader should be careful to not enable
-	 * the LCD clock if it is not needed.
-	*/
-
-	/* install (and disable) the clocks we do not need immediately */
-
-	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-
-	/* show the clock-slow value */
-
-	xtal = clk_get(NULL, "xtal");
-
-	printk("CLOCK: Slow mode (%ld.%ld MHz), %s, MPLL %s, UPLL %s\n",
-	       print_mhz(clk_get_rate(xtal) /
-			 ( 2 * S3C2410_CLKSLOW_GET_SLOWVAL(clkslow))),
-	       (clkslow & S3C2410_CLKSLOW_SLOW) ? "slow" : "fast",
-	       (clkslow & S3C2410_CLKSLOW_MPLL_OFF) ? "off" : "on",
-	       (clkslow & S3C2410_CLKSLOW_UCLK_OFF) ? "off" : "on");
-
-	return 0;
-}

arch/arm/mach-s3c24xx/clock-s3c2412.c

@@ -1,760 +0,0 @@
-/* linux/arch/arm/mach-s3c2412/clock.c
- *
- * Copyright (c) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2412,S3C2413 Clock control support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/device.h>
-#include <linux/clk.h>
-#include <linux/mutex.h>
-#include <linux/delay.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/io.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
-#include <mach/regs-clock.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/clock.h>
-#include <plat/cpu.h>
-
-/* We currently have to assume that the system is running
- * from the XTPll input, and that all ***REFCLKs are being
- * fed from it, as we cannot read the state of OM[4] from
- * software.
- *
- * It would be possible for each board initialisation to
- * set the correct muxing at initialisation
-*/
-
-static int s3c2412_clkcon_enable(struct clk *clk, int enable)
-{
-	unsigned int clocks = clk->ctrlbit;
-	unsigned long clkcon;
-
-	clkcon = __raw_readl(S3C2410_CLKCON);
-
-	if (enable)
-		clkcon |= clocks;
-	else
-		clkcon &= ~clocks;
-
-	__raw_writel(clkcon, S3C2410_CLKCON);
-
-	return 0;
-}
-
-static int s3c2412_upll_enable(struct clk *clk, int enable)
-{
-	unsigned long upllcon = __raw_readl(S3C2410_UPLLCON);
-	unsigned long orig = upllcon;
-
-	if (!enable)
-		upllcon |= S3C2412_PLLCON_OFF;
-	else
-		upllcon &= ~S3C2412_PLLCON_OFF;
-
-	__raw_writel(upllcon, S3C2410_UPLLCON);
-
-	/* allow ~150uS for the PLL to settle and lock */
-
-	if (enable && (orig & S3C2412_PLLCON_OFF))
-		udelay(150);
-
-	return 0;
-}
-
-/* clock selections */
-
-static struct clk clk_erefclk = {
-	.name		= "erefclk",
-};
-
-static struct clk clk_urefclk = {
-	.name		= "urefclk",
-};
-
-static int s3c2412_setparent_usysclk(struct clk *clk, struct clk *parent)
-{
-	unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
-
-	if (parent == &clk_urefclk)
-		clksrc &= ~S3C2412_CLKSRC_USYSCLK_UPLL;
-	else if (parent == &clk_upll)
-		clksrc |= S3C2412_CLKSRC_USYSCLK_UPLL;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	__raw_writel(clksrc, S3C2412_CLKSRC);
-	return 0;
-}
-
-static struct clk clk_usysclk = {
-	.name		= "usysclk",
-	.parent		= &clk_xtal,
-	.ops		= &(struct clk_ops) {
-		.set_parent	= s3c2412_setparent_usysclk,
-	},
-};
-
-static struct clk clk_mrefclk = {
-	.name		= "mrefclk",
-	.parent		= &clk_xtal,
-};
-
-static struct clk clk_mdivclk = {
-	.name		= "mdivclk",
-	.parent		= &clk_xtal,
-};
-
-static int s3c2412_setparent_usbsrc(struct clk *clk, struct clk *parent)
-{
-	unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
-
-	if (parent == &clk_usysclk)
-		clksrc &= ~S3C2412_CLKSRC_USBCLK_HCLK;
-	else if (parent == &clk_h)
-		clksrc |= S3C2412_CLKSRC_USBCLK_HCLK;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	__raw_writel(clksrc, S3C2412_CLKSRC);
-	return 0;
-}
-
-static unsigned long s3c2412_roundrate_usbsrc(struct clk *clk,
-					      unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	int div;
-
-	if (rate > parent_rate)
-		return parent_rate;
-
-	div = parent_rate / rate;
-	if (div > 2)
-		div = 2;
-
-	return parent_rate / div;
-}
-
-static unsigned long s3c2412_getrate_usbsrc(struct clk *clk)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long div = __raw_readl(S3C2410_CLKDIVN);
-
-	return parent_rate / ((div & S3C2412_CLKDIVN_USB48DIV) ? 2 : 1);
-}
-
-static int s3c2412_setrate_usbsrc(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN);
-
-	rate = s3c2412_roundrate_usbsrc(clk, rate);
-
-	if ((parent_rate / rate) == 2)
-		clkdivn |= S3C2412_CLKDIVN_USB48DIV;
-	else
-		clkdivn &= ~S3C2412_CLKDIVN_USB48DIV;
-
-	__raw_writel(clkdivn, S3C2410_CLKDIVN);
-	return 0;
-}
-
-static struct clk clk_usbsrc = {
-	.name		= "usbsrc",
-	.ops		= &(struct clk_ops) {
-		.get_rate	= s3c2412_getrate_usbsrc,
-		.set_rate	= s3c2412_setrate_usbsrc,
-		.round_rate	= s3c2412_roundrate_usbsrc,
-		.set_parent	= s3c2412_setparent_usbsrc,
-	},
-};
-
-static int s3c2412_setparent_msysclk(struct clk *clk, struct clk *parent)
-{
-	unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
-
-	if (parent == &clk_mdivclk)
-		clksrc &= ~S3C2412_CLKSRC_MSYSCLK_MPLL;
-	else if (parent == &clk_mpll)
-		clksrc |= S3C2412_CLKSRC_MSYSCLK_MPLL;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	__raw_writel(clksrc, S3C2412_CLKSRC);
-	return 0;
-}
-
-static struct clk clk_msysclk = {
-	.name		= "msysclk",
-	.ops		= &(struct clk_ops) {
-		.set_parent	= s3c2412_setparent_msysclk,
-	},
-};
-
-static int s3c2412_setparent_armclk(struct clk *clk, struct clk *parent)
-{
-	unsigned long flags;
-	unsigned long clkdiv;
-	unsigned long dvs;
-
-	/* Note, we current equate fclk andf msysclk for S3C2412 */
-
-	if (parent == &clk_msysclk || parent == &clk_f)
-		dvs = 0;
-	else if (parent == &clk_h)
-		dvs = S3C2412_CLKDIVN_DVSEN;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	/* update this under irq lockdown, clkdivn is not protected
-	 * by the clock system. */
-
-	local_irq_save(flags);
-
-	clkdiv  = __raw_readl(S3C2410_CLKDIVN);
-	clkdiv &= ~S3C2412_CLKDIVN_DVSEN;
-	clkdiv |= dvs;
-	__raw_writel(clkdiv, S3C2410_CLKDIVN);
-
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-static struct clk clk_armclk = {
-	.name		= "armclk",
-	.parent		= &clk_msysclk,
-	.ops		= &(struct clk_ops) {
-		.set_parent	= s3c2412_setparent_armclk,
-	},
-};
-
-/* these next clocks have an divider immediately after them,
- * so we can register them with their divider and leave out the
- * intermediate clock stage
-*/
-static unsigned long s3c2412_roundrate_clksrc(struct clk *clk,
-					      unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	int div;
-
-	if (rate > parent_rate)
-		return parent_rate;
-
-	/* note, we remove the +/- 1 calculations as they cancel out */
-
-	div = (rate / parent_rate);
-
-	if (div < 1)
-		div = 1;
-	else if (div > 16)
-		div = 16;
-
-	return parent_rate / div;
-}
-
-static int s3c2412_setparent_uart(struct clk *clk, struct clk *parent)
-{
-	unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
-
-	if (parent == &clk_erefclk)
-		clksrc &= ~S3C2412_CLKSRC_UARTCLK_MPLL;
-	else if (parent == &clk_mpll)
-		clksrc |= S3C2412_CLKSRC_UARTCLK_MPLL;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	__raw_writel(clksrc, S3C2412_CLKSRC);
-	return 0;
-}
-
-static unsigned long s3c2412_getrate_uart(struct clk *clk)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long div = __raw_readl(S3C2410_CLKDIVN);
-
-	div &= S3C2412_CLKDIVN_UARTDIV_MASK;
-	div >>= S3C2412_CLKDIVN_UARTDIV_SHIFT;
-
-	return parent_rate / (div + 1);
-}
-
-static int s3c2412_setrate_uart(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN);
-
-	rate = s3c2412_roundrate_clksrc(clk, rate);
-
-	clkdivn &= ~S3C2412_CLKDIVN_UARTDIV_MASK;
-	clkdivn |= ((parent_rate / rate) - 1) << S3C2412_CLKDIVN_UARTDIV_SHIFT;
-
-	__raw_writel(clkdivn, S3C2410_CLKDIVN);
-	return 0;
-}
-
-static struct clk clk_uart = {
-	.name		= "uartclk",
-	.ops		= &(struct clk_ops) {
-		.get_rate	= s3c2412_getrate_uart,
-		.set_rate	= s3c2412_setrate_uart,
-		.set_parent	= s3c2412_setparent_uart,
-		.round_rate	= s3c2412_roundrate_clksrc,
-	},
-};
-
-static int s3c2412_setparent_i2s(struct clk *clk, struct clk *parent)
-{
-	unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
-
-	if (parent == &clk_erefclk)
-		clksrc &= ~S3C2412_CLKSRC_I2SCLK_MPLL;
-	else if (parent == &clk_mpll)
-		clksrc |= S3C2412_CLKSRC_I2SCLK_MPLL;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	__raw_writel(clksrc, S3C2412_CLKSRC);
-	return 0;
-}
-
-static unsigned long s3c2412_getrate_i2s(struct clk *clk)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long div = __raw_readl(S3C2410_CLKDIVN);
-
-	div &= S3C2412_CLKDIVN_I2SDIV_MASK;
-	div >>= S3C2412_CLKDIVN_I2SDIV_SHIFT;
-
-	return parent_rate / (div + 1);
-}
-
-static int s3c2412_setrate_i2s(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN);
-
-	rate = s3c2412_roundrate_clksrc(clk, rate);
-
-	clkdivn &= ~S3C2412_CLKDIVN_I2SDIV_MASK;
-	clkdivn |= ((parent_rate / rate) - 1) << S3C2412_CLKDIVN_I2SDIV_SHIFT;
-
-	__raw_writel(clkdivn, S3C2410_CLKDIVN);
-	return 0;
-}
-
-static struct clk clk_i2s = {
-	.name		= "i2sclk",
-	.ops		= &(struct clk_ops) {
-		.get_rate	= s3c2412_getrate_i2s,
-		.set_rate	= s3c2412_setrate_i2s,
-		.set_parent	= s3c2412_setparent_i2s,
-		.round_rate	= s3c2412_roundrate_clksrc,
-	},
-};
-
-static int s3c2412_setparent_cam(struct clk *clk, struct clk *parent)
-{
-	unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
-
-	if (parent == &clk_usysclk)
-		clksrc &= ~S3C2412_CLKSRC_CAMCLK_HCLK;
-	else if (parent == &clk_h)
-		clksrc |= S3C2412_CLKSRC_CAMCLK_HCLK;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	__raw_writel(clksrc, S3C2412_CLKSRC);
-	return 0;
-}
-static unsigned long s3c2412_getrate_cam(struct clk *clk)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long div = __raw_readl(S3C2410_CLKDIVN);
-
-	div &= S3C2412_CLKDIVN_CAMDIV_MASK;
-	div >>= S3C2412_CLKDIVN_CAMDIV_SHIFT;
-
-	return parent_rate / (div + 1);
-}
-
-static int s3c2412_setrate_cam(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN);
-
-	rate = s3c2412_roundrate_clksrc(clk, rate);
-
-	clkdivn &= ~S3C2412_CLKDIVN_CAMDIV_MASK;
-	clkdivn |= ((parent_rate / rate) - 1) << S3C2412_CLKDIVN_CAMDIV_SHIFT;
-
-	__raw_writel(clkdivn, S3C2410_CLKDIVN);
-	return 0;
-}
-
-static struct clk clk_cam = {
-	.name		= "camif-upll",	/* same as 2440 name */
-	.ops		= &(struct clk_ops) {
-		.get_rate	= s3c2412_getrate_cam,
-		.set_rate	= s3c2412_setrate_cam,
-		.set_parent	= s3c2412_setparent_cam,
-		.round_rate	= s3c2412_roundrate_clksrc,
-	},
-};
-
-/* standard clock definitions */
-
-static struct clk init_clocks_disable[] = {
-	{
-		.name		= "nand",
-		.parent		= &clk_h,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_NAND,
-	}, {
-		.name		= "sdi",
-		.parent		= &clk_p,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_SDI,
-	}, {
-		.name		= "adc",
-		.parent		= &clk_p,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_ADC,
-	}, {
-		.name		= "i2c",
-		.parent		= &clk_p,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_IIC,
-	}, {
-		.name		= "iis",
-		.parent		= &clk_p,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_IIS,
-	}, {
-		.name		= "spi",
-		.parent		= &clk_p,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_SPI,
-	}
-};
-
-static struct clk init_clocks[] = {
-	{
-		.name		= "dma.0",
-		.parent		= &clk_h,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_DMA0,
-	}, {
-		.name		= "dma.1",
-		.parent		= &clk_h,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_DMA1,
-	}, {
-		.name		= "dma.2",
-		.parent		= &clk_h,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_DMA2,
-	}, {
-		.name		= "dma.3",
-		.parent		= &clk_h,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_DMA3,
-	}, {
-		.name		= "lcd",
-		.parent		= &clk_h,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_LCDC,
-	}, {
-		.name		= "gpio",
-		.parent		= &clk_p,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_GPIO,
-	}, {
-		.name		= "usb-host",
-		.parent		= &clk_h,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_USBH,
-	}, {
-		.name		= "usb-device",
-		.parent		= &clk_h,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_USBD,
-	}, {
-		.name		= "timers",
-		.parent		= &clk_p,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_PWMT,
-	}, {
-		.name		= "uart",
-		.devname	= "s3c2412-uart.0",
-		.parent		= &clk_p,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_UART0,
-	}, {
-		.name		= "uart",
-		.devname	= "s3c2412-uart.1",
-		.parent		= &clk_p,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_UART1,
-	}, {
-		.name		= "uart",
-		.devname	= "s3c2412-uart.2",
-		.parent		= &clk_p,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_UART2,
-	}, {
-		.name		= "rtc",
-		.parent		= &clk_p,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_RTC,
-	}, {
-		.name		= "watchdog",
-		.parent		= &clk_p,
-		.ctrlbit	= 0,
-	}, {
-		.name		= "usb-bus-gadget",
-		.parent		= &clk_usb_bus,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_USB_DEV48,
-	}, {
-		.name		= "usb-bus-host",
-		.parent		= &clk_usb_bus,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_USB_HOST48,
-	}
-};
-
-/* clocks to add where we need to check their parentage */
-
-struct clk_init {
-	struct clk	*clk;
-	unsigned int	 bit;
-	struct clk	*src_0;
-	struct clk	*src_1;
-};
-
-static struct clk_init clks_src[] __initdata = {
-	{
-		.clk	= &clk_usysclk,
-		.bit	= S3C2412_CLKSRC_USBCLK_HCLK,
-		.src_0	= &clk_urefclk,
-		.src_1	= &clk_upll,
-	}, {
-		.clk	= &clk_i2s,
-		.bit	= S3C2412_CLKSRC_I2SCLK_MPLL,
-		.src_0	= &clk_erefclk,
-		.src_1	= &clk_mpll,
-	}, {
-		.clk	= &clk_cam,
-		.bit	= S3C2412_CLKSRC_CAMCLK_HCLK,
-		.src_0	= &clk_usysclk,
-		.src_1	= &clk_h,
-	}, {
-		.clk	= &clk_msysclk,
-		.bit	= S3C2412_CLKSRC_MSYSCLK_MPLL,
-		.src_0	= &clk_mdivclk,
-		.src_1	= &clk_mpll,
-	}, {
-		.clk	= &clk_uart,
-		.bit	= S3C2412_CLKSRC_UARTCLK_MPLL,
-		.src_0	= &clk_erefclk,
-		.src_1	= &clk_mpll,
-	}, {
-		.clk	= &clk_usbsrc,
-		.bit	= S3C2412_CLKSRC_USBCLK_HCLK,
-		.src_0	= &clk_usysclk,
-		.src_1	= &clk_h,
-	/* here we assume  OM[4] select xtal */
-	}, {
-		.clk	= &clk_erefclk,
-		.bit	= S3C2412_CLKSRC_EREFCLK_EXTCLK,
-		.src_0	= &clk_xtal,
-		.src_1	= &clk_ext,
-	}, {
-		.clk	= &clk_urefclk,
-		.bit	= S3C2412_CLKSRC_UREFCLK_EXTCLK,
-		.src_0	= &clk_xtal,
-		.src_1	= &clk_ext,
-	},
-};
-
-/* s3c2412_clk_initparents
- *
- * Initialise the parents for the clocks that we get at start-time
-*/
-
-static void __init s3c2412_clk_initparents(void)
-{
-	unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
-	struct clk_init *cip = clks_src;
-	struct clk *src;
-	int ptr;
-	int ret;
-
-	for (ptr = 0; ptr < ARRAY_SIZE(clks_src); ptr++, cip++) {
-		ret = s3c24xx_register_clock(cip->clk);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       cip->clk->name, ret);
-		}
-
-		src = (clksrc & cip->bit) ? cip->src_1 : cip->src_0;
-
-		printk(KERN_INFO "%s: parent %s\n", cip->clk->name, src->name);
-		clk_set_parent(cip->clk, src);
-	}
-}
-
-/* clocks to add straight away */
-
-static struct clk *clks[] __initdata = {
-	&clk_ext,
-	&clk_usb_bus,
-	&clk_mrefclk,
-	&clk_armclk,
-};
-
-static struct clk_lookup s3c2412_clk_lookup[] = {
-	CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk),
-	CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
-	CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_usysclk),
-};
-
-int __init s3c2412_baseclk_add(void)
-{
-	unsigned long clkcon  = __raw_readl(S3C2410_CLKCON);
-	unsigned int dvs;
-	struct clk *clkp;
-	int ret;
-	int ptr;
-
-	clk_upll.enable = s3c2412_upll_enable;
-	clk_usb_bus.parent = &clk_usbsrc;
-	clk_usb_bus.rate = 0x0;
-
-	clk_f.parent = &clk_msysclk;
-
-	s3c2412_clk_initparents();
-
-	for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) {
-		clkp = clks[ptr];
-
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-	}
-
-	/* set the dvs state according to what we got at boot time */
-
-	dvs = __raw_readl(S3C2410_CLKDIVN) & S3C2412_CLKDIVN_DVSEN;
-
-	if (dvs)
-		clk_armclk.parent = &clk_h;
-
-	printk(KERN_INFO "S3C2412: DVS is %s\n", dvs ? "on" : "off");
-
-	/* ensure usb bus clock is within correct rate of 48MHz */
-
-	if (clk_get_rate(&clk_usb_bus) != (48 * 1000 * 1000)) {
-		printk(KERN_INFO "Warning: USB bus clock not at 48MHz\n");
-
-		/* for the moment, let's use the UPLL, and see if we can
-		 * get 48MHz */
-
-		clk_set_parent(&clk_usysclk, &clk_upll);
-		clk_set_parent(&clk_usbsrc, &clk_usysclk);
-		clk_set_rate(&clk_usbsrc, 48*1000*1000);
-	}
-
-	printk("S3C2412: upll %s, %ld.%03ld MHz, usb-bus %ld.%03ld MHz\n",
-	       (__raw_readl(S3C2410_UPLLCON) & S3C2412_PLLCON_OFF) ? "off":"on",
-	       print_mhz(clk_get_rate(&clk_upll)),
-	       print_mhz(clk_get_rate(&clk_usb_bus)));
-
-	/* register clocks from clock array */
-
-	clkp = init_clocks;
-	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) {
-		/* ensure that we note the clock state */
-
-		clkp->usage = clkcon & clkp->ctrlbit ? 1 : 0;
-
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-	}
-
-	/* We must be careful disabling the clocks we are not intending to
-	 * be using at boot time, as subsystems such as the LCD which do
-	 * their own DMA requests to the bus can cause the system to lockup
-	 * if they where in the middle of requesting bus access.
-	 *
-	 * Disabling the LCD clock if the LCD is active is very dangerous,
-	 * and therefore the bootloader should be careful to not enable
-	 * the LCD clock if it is not needed.
-	*/
-
-	/* install (and disable) the clocks we do not need immediately */
-
-	clkp = init_clocks_disable;
-	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
-
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-
-		s3c2412_clkcon_enable(clkp, 0);
-	}
-
-	clkdev_add_table(s3c2412_clk_lookup, ARRAY_SIZE(s3c2412_clk_lookup));
-	return 0;
-}

arch/arm/mach-s3c24xx/clock-s3c2416.c

@@ -1,171 +0,0 @@
-/* linux/arch/arm/mach-s3c2416/clock.c
- *
- * Copyright (c) 2010 Simtec Electronics
- * Copyright (c) 2010 Ben Dooks <ben-linux@fluff.org>
- *
- * S3C2416 Clock control support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/init.h>
-#include <linux/clk.h>
-
-#include <plat/clock.h>
-#include <plat/clock-clksrc.h>
-#include <plat/cpu.h>
-
-#include <plat/cpu-freq.h>
-#include <plat/pll.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/regs-clock.h>
-#include <mach/regs-s3c2443-clock.h>
-
-/* armdiv
- *
- * this clock is sourced from msysclk and can have a number of
- * divider values applied to it to then be fed into armclk.
- * The real clock definition is done in s3c2443-clock.c,
- * only the armdiv divisor table must be defined here.
-*/
-
-static unsigned int armdiv[8] = {
-	[0] = 1,
-	[1] = 2,
-	[2] = 3,
-	[3] = 4,
-	[5] = 6,
-	[7] = 8,
-};
-
-static struct clksrc_clk hsspi_eplldiv = {
-	.clk = {
-		.name	= "hsspi-eplldiv",
-		.parent	= &clk_esysclk.clk,
-		.ctrlbit = (1 << 14),
-		.enable = s3c2443_clkcon_enable_s,
-	},
-	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 24 },
-};
-
-static struct clk *hsspi_sources[] = {
-	[0] = &hsspi_eplldiv.clk,
-	[1] = NULL, /* to fix */
-};
-
-static struct clksrc_clk hsspi_mux = {
-	.clk	= {
-		.name	= "hsspi-if",
-	},
-	.sources = &(struct clksrc_sources) {
-		.sources = hsspi_sources,
-		.nr_sources = ARRAY_SIZE(hsspi_sources),
-	},
-	.reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 18 },
-};
-
-static struct clksrc_clk hsmmc_div[] = {
-	[0] = {
-		.clk = {
-			.name	= "hsmmc-div",
-			.devname	= "s3c-sdhci.0",
-			.parent	= &clk_esysclk.clk,
-		},
-		.reg_div = { .reg = S3C2416_CLKDIV2, .size = 2, .shift = 6 },
-	},
-	[1] = {
-		.clk = {
-			.name	= "hsmmc-div",
-			.devname	= "s3c-sdhci.1",
-			.parent	= &clk_esysclk.clk,
-		},
-		.reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 6 },
-	},
-};
-
-static struct clksrc_clk hsmmc_mux0 = {
-	.clk	= {
-		.name		= "hsmmc-if",
-		.devname	= "s3c-sdhci.0",
-		.ctrlbit	= (1 << 6),
-		.enable		= s3c2443_clkcon_enable_s,
-	},
-	.sources	= &(struct clksrc_sources) {
-		.nr_sources	= 2,
-		.sources	= (struct clk * []) {
-			[0]	= &hsmmc_div[0].clk,
-			[1]	= NULL, /* to fix */
-		},
-	},
-	.reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 16 },
-};
-
-static struct clksrc_clk hsmmc_mux1 = {
-	.clk	= {
-		.name		= "hsmmc-if",
-		.devname	= "s3c-sdhci.1",
-		.ctrlbit	= (1 << 12),
-		.enable		= s3c2443_clkcon_enable_s,
-	},
-	.sources	= &(struct clksrc_sources) {
-		.nr_sources	= 2,
-		.sources	= (struct clk * []) {
-			[0]	= &hsmmc_div[1].clk,
-			[1]	= NULL, /* to fix */
-		},
-	},
-	.reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 17 },
-};
-
-static struct clk hsmmc0_clk = {
-	.name		= "hsmmc",
-	.devname	= "s3c-sdhci.0",
-	.parent		= &clk_h,
-	.enable		= s3c2443_clkcon_enable_h,
-	.ctrlbit	= S3C2416_HCLKCON_HSMMC0,
-};
-
-static struct clksrc_clk *clksrcs[] __initdata = {
-	&hsspi_eplldiv,
-	&hsspi_mux,
-	&hsmmc_div[0],
-	&hsmmc_div[1],
-	&hsmmc_mux0,
-	&hsmmc_mux1,
-};
-
-static struct clk_lookup s3c2416_clk_lookup[] = {
-	CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.0", &hsmmc0_clk),
-	CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &hsmmc_mux0.clk),
-	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &hsmmc_mux1.clk),
-	/* s3c2443-spi.0 is used on s3c2416 and s3c2450 as well */
-	CLKDEV_INIT("s3c2443-spi.0", "spi_busclk2", &hsspi_mux.clk),
-};
-
-void __init s3c2416_init_clocks(int xtal)
-{
-	u32 epllcon = __raw_readl(S3C2443_EPLLCON);
-	u32 epllcon1 = __raw_readl(S3C2443_EPLLCON+4);
-	int ptr;
-
-	/* s3c2416 EPLL compatible with s3c64xx */
-	clk_epll.rate = s3c_get_pll6553x(xtal, epllcon, epllcon1);
-
-	clk_epll.parent = &clk_epllref.clk;
-
-	s3c2443_common_init_clocks(xtal, s3c2416_get_pll,
-				   armdiv, ARRAY_SIZE(armdiv),
-				   S3C2416_CLKDIV0_ARMDIV_MASK);
-
-	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
-		s3c_register_clksrc(clksrcs[ptr], 1);
-
-	s3c24xx_register_clock(&hsmmc0_clk);
-	clkdev_add_table(s3c2416_clk_lookup, ARRAY_SIZE(s3c2416_clk_lookup));
-
-}

arch/arm/mach-s3c24xx/clock-s3c2440.c

@@ -1,217 +0,0 @@
-/* linux/arch/arm/mach-s3c2440/clock.c
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2440 Clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/device.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mutex.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-
-#include <mach/hardware.h>
-#include <linux/atomic.h>
-#include <asm/irq.h>
-
-#include <mach/regs-clock.h>
-
-#include <plat/clock.h>
-#include <plat/cpu.h>
-
-/* S3C2440 extended clock support */
-
-static unsigned long s3c2440_camif_upll_round(struct clk *clk,
-					      unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	int div;
-
-	if (rate > parent_rate)
-		return parent_rate;
-
-	/* note, we remove the +/- 1 calculations for the divisor */
-
-	div = (parent_rate / rate) / 2;
-
-	if (div < 1)
-		div = 1;
-	else if (div > 16)
-		div = 16;
-
-	return parent_rate / (div * 2);
-}
-
-static int s3c2440_camif_upll_setrate(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long camdivn =  __raw_readl(S3C2440_CAMDIVN);
-
-	rate = s3c2440_camif_upll_round(clk, rate);
-
-	camdivn &= ~(S3C2440_CAMDIVN_CAMCLK_SEL | S3C2440_CAMDIVN_CAMCLK_MASK);
-
-	if (rate != parent_rate) {
-		camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL;
-		camdivn |= (((parent_rate / rate) / 2) - 1);
-	}
-
-	__raw_writel(camdivn, S3C2440_CAMDIVN);
-
-	return 0;
-}
-
-static unsigned long s3c2440_camif_upll_getrate(struct clk *clk)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long camdivn =  __raw_readl(S3C2440_CAMDIVN);
-
-	if (!(camdivn & S3C2440_CAMDIVN_CAMCLK_SEL))
-		return parent_rate;
-
-	camdivn &= S3C2440_CAMDIVN_CAMCLK_MASK;
-
-	return parent_rate / (camdivn + 1) / 2;
-}
-
-/* Extra S3C2440 clocks */
-
-static struct clk s3c2440_clk_cam = {
-	.name		= "camif",
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2440_CLKCON_CAMERA,
-};
-
-static struct clk s3c2440_clk_cam_upll = {
-	.name		= "camif-upll",
-	.ops		= &(struct clk_ops) {
-		.set_rate	= s3c2440_camif_upll_setrate,
-		.get_rate	= s3c2440_camif_upll_getrate,
-		.round_rate	= s3c2440_camif_upll_round,
-	},
-};
-
-static struct clk s3c2440_clk_ac97 = {
-	.name		= "ac97",
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2440_CLKCON_AC97,
-};
-
-#define S3C24XX_VA_UART0      (S3C_VA_UART)
-#define S3C24XX_VA_UART1      (S3C_VA_UART + 0x4000 )
-#define S3C24XX_VA_UART2      (S3C_VA_UART + 0x8000 )
-#define S3C24XX_VA_UART3      (S3C_VA_UART + 0xC000 )
-
-static unsigned long  s3c2440_fclk_n_getrate(struct clk *clk)
-{
-	unsigned long ucon0, ucon1, ucon2, divisor;
-
-	/* the fun of calculating the uart divisors on the s3c2440 */
-	ucon0 = __raw_readl(S3C24XX_VA_UART0 + S3C2410_UCON);
-	ucon1 = __raw_readl(S3C24XX_VA_UART1 + S3C2410_UCON);
-	ucon2 = __raw_readl(S3C24XX_VA_UART2 + S3C2410_UCON);
-
-	ucon0 &= S3C2440_UCON0_DIVMASK;
-	ucon1 &= S3C2440_UCON1_DIVMASK;
-	ucon2 &= S3C2440_UCON2_DIVMASK;
-
-	if (ucon0 != 0)
-		divisor = (ucon0 >> S3C2440_UCON_DIVSHIFT) + 6;
-	else if (ucon1 != 0)
-		divisor = (ucon1 >> S3C2440_UCON_DIVSHIFT) + 21;
-	else if (ucon2 != 0)
-		divisor = (ucon2 >> S3C2440_UCON_DIVSHIFT) + 36;
-	else
-		/* manual calims 44, seems to be 9 */
-		divisor = 9;
-
-	return clk_get_rate(clk->parent) / divisor;
-}
-
-static struct clk s3c2440_clk_fclk_n = {
-	.name		= "fclk_n",
-	.parent		= &clk_f,
-	.ops		= &(struct clk_ops) {
-		.get_rate	= s3c2440_fclk_n_getrate,
-	},
-};
-
-static struct clk_lookup s3c2440_clk_lookup[] = {
-	CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk),
-	CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
-	CLKDEV_INIT(NULL, "clk_uart_baud3", &s3c2440_clk_fclk_n),
-	CLKDEV_INIT("s3c2440-uart.0", "uart", &s3c24xx_clk_uart0),
-	CLKDEV_INIT("s3c2440-uart.1", "uart", &s3c24xx_clk_uart1),
-	CLKDEV_INIT("s3c2440-uart.2", "uart", &s3c24xx_clk_uart2),
-	CLKDEV_INIT("s3c2440-camif", "camera", &s3c2440_clk_cam_upll),
-};
-
-static int __init_refok s3c2440_clk_add(struct device *dev, struct subsys_interface *sif)
-{
-	struct clk *clock_upll;
-	struct clk *clock_h;
-	struct clk *clock_p;
-
-	clock_p = clk_get(NULL, "pclk");
-	clock_h = clk_get(NULL, "hclk");
-	clock_upll = clk_get(NULL, "upll");
-
-	if (IS_ERR(clock_p) || IS_ERR(clock_h) || IS_ERR(clock_upll)) {
-		printk(KERN_ERR "S3C2440: Failed to get parent clocks\n");
-		return -EINVAL;
-	}
-
-	s3c2440_clk_cam.parent = clock_h;
-	s3c2440_clk_ac97.parent = clock_p;
-	s3c2440_clk_cam_upll.parent = clock_upll;
-	s3c24xx_register_clock(&s3c2440_clk_fclk_n);
-
-	s3c24xx_register_clock(&s3c2440_clk_ac97);
-	s3c24xx_register_clock(&s3c2440_clk_cam);
-	s3c24xx_register_clock(&s3c2440_clk_cam_upll);
-	clkdev_add_table(s3c2440_clk_lookup, ARRAY_SIZE(s3c2440_clk_lookup));
-
-	clk_disable(&s3c2440_clk_ac97);
-	clk_disable(&s3c2440_clk_cam);
-
-	return 0;
-}
-
-static struct subsys_interface s3c2440_clk_interface = {
-	.name		= "s3c2440_clk",
-	.subsys		= &s3c2440_subsys,
-	.add_dev	= s3c2440_clk_add,
-};
-
-static __init int s3c24xx_clk_init(void)
-{
-	return subsys_interface_register(&s3c2440_clk_interface);
-}
-
-arch_initcall(s3c24xx_clk_init);

arch/arm/mach-s3c24xx/clock-s3c2443.c

@@ -1,212 +0,0 @@
-/* linux/arch/arm/mach-s3c2443/clock.c
- *
- * Copyright (c) 2007, 2010 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2443 Clock control support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/init.h>
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/device.h>
-#include <linux/clk.h>
-#include <linux/mutex.h>
-#include <linux/serial_core.h>
-#include <linux/io.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
-
-#include <mach/regs-s3c2443-clock.h>
-
-#include <plat/cpu-freq.h>
-
-#include <plat/clock.h>
-#include <plat/clock-clksrc.h>
-#include <plat/cpu.h>
-
-/* We currently have to assume that the system is running
- * from the XTPll input, and that all ***REFCLKs are being
- * fed from it, as we cannot read the state of OM[4] from
- * software.
- *
- * It would be possible for each board initialisation to
- * set the correct muxing at initialisation
-*/
-
-/* clock selections */
-
-/* armdiv
- *
- * this clock is sourced from msysclk and can have a number of
- * divider values applied to it to then be fed into armclk.
- * The real clock definition is done in s3c2443-clock.c,
- * only the armdiv divisor table must be defined here.
-*/
-
-static unsigned int armdiv[16] = {
-	[S3C2443_CLKDIV0_ARMDIV_1 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 1,
-	[S3C2443_CLKDIV0_ARMDIV_2 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 2,
-	[S3C2443_CLKDIV0_ARMDIV_3 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 3,
-	[S3C2443_CLKDIV0_ARMDIV_4 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 4,
-	[S3C2443_CLKDIV0_ARMDIV_6 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 6,
-	[S3C2443_CLKDIV0_ARMDIV_8 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 8,
-	[S3C2443_CLKDIV0_ARMDIV_12 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 12,
-	[S3C2443_CLKDIV0_ARMDIV_16 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 16,
-};
-
-/* hsspi
- *
- * high-speed spi clock, sourced from esysclk
-*/
-
-static struct clksrc_clk clk_hsspi = {
-	.clk	= {
-		.name		= "hsspi-if",
-		.parent		= &clk_esysclk.clk,
-		.ctrlbit	= S3C2443_SCLKCON_HSSPICLK,
-		.enable		= s3c2443_clkcon_enable_s,
-	},
-	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 4 },
-};
-
-
-/* clk_hsmcc_div
- *
- * this clock is sourced from epll, and is fed through a divider,
- * to a mux controlled by sclkcon where either it or a extclk can
- * be fed to the hsmmc block
-*/
-
-static struct clksrc_clk clk_hsmmc_div = {
-	.clk	= {
-		.name		= "hsmmc-div",
-		.devname	= "s3c-sdhci.1",
-		.parent		= &clk_esysclk.clk,
-	},
-	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 6 },
-};
-
-static int s3c2443_setparent_hsmmc(struct clk *clk, struct clk *parent)
-{
-	unsigned long clksrc = __raw_readl(S3C2443_SCLKCON);
-
-	clksrc &= ~(S3C2443_SCLKCON_HSMMCCLK_EXT |
-		    S3C2443_SCLKCON_HSMMCCLK_EPLL);
-
-	if (parent == &clk_epll)
-		clksrc |= S3C2443_SCLKCON_HSMMCCLK_EPLL;
-	else if (parent == &clk_ext)
-		clksrc |= S3C2443_SCLKCON_HSMMCCLK_EXT;
-	else
-		return -EINVAL;
-
-	if (clk->usage > 0) {
-		__raw_writel(clksrc, S3C2443_SCLKCON);
-	}
-
-	clk->parent = parent;
-	return 0;
-}
-
-static int s3c2443_enable_hsmmc(struct clk *clk, int enable)
-{
-	return s3c2443_setparent_hsmmc(clk, clk->parent);
-}
-
-static struct clk clk_hsmmc = {
-	.name		= "hsmmc-if",
-	.devname	= "s3c-sdhci.1",
-	.parent		= &clk_hsmmc_div.clk,
-	.enable		= s3c2443_enable_hsmmc,
-	.ops		= &(struct clk_ops) {
-		.set_parent	= s3c2443_setparent_hsmmc,
-	},
-};
-
-/* standard clock definitions */
-
-static struct clk init_clocks_off[] = {
-	{
-		.name		= "sdi",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_SDI,
-	}, {
-		.name		= "spi",
-		.devname	= "s3c2410-spi.0",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_SPI1,
-	}
-};
-
-/* clocks to add straight away */
-
-static struct clksrc_clk *clksrcs[] __initdata = {
-	&clk_hsspi,
-	&clk_hsmmc_div,
-};
-
-static struct clk *clks[] __initdata = {
-	&clk_hsmmc,
-};
-
-static struct clk_lookup s3c2443_clk_lookup[] = {
-	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_hsmmc),
-	CLKDEV_INIT("s3c2443-spi.0", "spi_busclk2", &clk_hsspi.clk),
-};
-
-void __init s3c2443_init_clocks(int xtal)
-{
-	unsigned long epllcon = __raw_readl(S3C2443_EPLLCON);
-	int ptr;
-
-	clk_epll.rate = s3c2443_get_epll(epllcon, xtal);
-	clk_epll.parent = &clk_epllref.clk;
-
-	s3c2443_common_init_clocks(xtal, s3c2443_get_mpll,
-				   armdiv, ARRAY_SIZE(armdiv),
-				   S3C2443_CLKDIV0_ARMDIV_MASK);
-
-	s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
-
-	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
-		s3c_register_clksrc(clksrcs[ptr], 1);
-
-	/* We must be careful disabling the clocks we are not intending to
-	 * be using at boot time, as subsystems such as the LCD which do
-	 * their own DMA requests to the bus can cause the system to lockup
-	 * if they where in the middle of requesting bus access.
-	 *
-	 * Disabling the LCD clock if the LCD is active is very dangerous,
-	 * and therefore the bootloader should be careful to not enable
-	 * the LCD clock if it is not needed.
-	*/
-
-	/* install (and disable) the clocks we do not need immediately */
-
-	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-	clkdev_add_table(s3c2443_clk_lookup, ARRAY_SIZE(s3c2443_clk_lookup));
-}

arch/arm/mach-s3c24xx/clock-s3c244x.c

@@ -1,141 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/s3c24xx-clock.c
- *
- * Copyright (c) 2004-2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2440/S3C2442 Common clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/device.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <linux/atomic.h>
-#include <asm/irq.h>
-
-#include <mach/regs-clock.h>
-
-#include <plat/clock.h>
-#include <plat/cpu.h>
-
-static int s3c2440_setparent_armclk(struct clk *clk, struct clk *parent)
-{
-	unsigned long camdivn;
-	unsigned long dvs;
-
-	if (parent == &clk_f)
-		dvs = 0;
-	else if (parent == &clk_h)
-		dvs = S3C2440_CAMDIVN_DVSEN;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	camdivn  = __raw_readl(S3C2440_CAMDIVN);
-	camdivn &= ~S3C2440_CAMDIVN_DVSEN;
-	camdivn |= dvs;
-	__raw_writel(camdivn, S3C2440_CAMDIVN);
-
-	return 0;
-}
-
-static struct clk clk_arm = {
-	.name		= "armclk",
-	.id		= -1,
-	.ops		= &(struct clk_ops) {
-		.set_parent	= s3c2440_setparent_armclk,
-	},
-};
-
-static int s3c244x_clk_add(struct device *dev, struct subsys_interface *sif)
-{
-	unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN);
-	unsigned long clkdivn;
-	struct clk *clock_upll;
-	int ret;
-
-	printk("S3C244X: Clock Support, DVS %s\n",
-	       (camdivn & S3C2440_CAMDIVN_DVSEN) ? "on" : "off");
-
-	clk_arm.parent = (camdivn & S3C2440_CAMDIVN_DVSEN) ? &clk_h : &clk_f;
-
-	ret = s3c24xx_register_clock(&clk_arm);
-	if (ret < 0) {
-		printk(KERN_ERR "S3C24XX: Failed to add armclk (%d)\n", ret);
-		return ret;
-	}
-
-	clock_upll = clk_get(NULL, "upll");
-	if (IS_ERR(clock_upll)) {
-		printk(KERN_ERR "S3C244X: Failed to get upll clock\n");
-		return -ENOENT;
-	}
-
-	/* check rate of UPLL, and if it is near 96MHz, then change
-	 * to using half the UPLL rate for the system */
-
-	if (clk_get_rate(clock_upll) > (94 * MHZ)) {
-		clk_usb_bus.rate = clk_get_rate(clock_upll) / 2;
-
-		spin_lock(&clocks_lock);
-
-		clkdivn = __raw_readl(S3C2410_CLKDIVN);
-		clkdivn |= S3C2440_CLKDIVN_UCLK;
-		__raw_writel(clkdivn, S3C2410_CLKDIVN);
-
-		spin_unlock(&clocks_lock);
-	}
-
-	return 0;
-}
-
-static struct subsys_interface s3c2440_clk_interface = {
-	.name		= "s3c2440_clk",
-	.subsys		= &s3c2440_subsys,
-	.add_dev	= s3c244x_clk_add,
-};
-
-static int s3c2440_clk_init(void)
-{
-	return subsys_interface_register(&s3c2440_clk_interface);
-}
-
-arch_initcall(s3c2440_clk_init);
-
-static struct subsys_interface s3c2442_clk_interface = {
-	.name		= "s3c2442_clk",
-	.subsys		= &s3c2442_subsys,
-	.add_dev	= s3c244x_clk_add,
-};
-
-static int s3c2442_clk_init(void)
-{
-	return subsys_interface_register(&s3c2442_clk_interface);
-}
-
-arch_initcall(s3c2442_clk_init);

arch/arm/mach-s3c24xx/common-s3c2443.c

@@ -1,675 +0,0 @@
-/*
- * Common code for SoCs starting with the S3C2443
- *
- * Copyright (c) 2007, 2010 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <mach/regs-s3c2443-clock.h>
-
-#include <plat/clock.h>
-#include <plat/clock-clksrc.h>
-#include <plat/cpu.h>
-
-#include <plat/cpu-freq.h>
-
-
-static int s3c2443_gate(void __iomem *reg, struct clk *clk, int enable)
-{
-	u32 ctrlbit = clk->ctrlbit;
-	u32 con = __raw_readl(reg);
-
-	if (enable)
-		con |= ctrlbit;
-	else
-		con &= ~ctrlbit;
-
-	__raw_writel(con, reg);
-	return 0;
-}
-
-int s3c2443_clkcon_enable_h(struct clk *clk, int enable)
-{
-	return s3c2443_gate(S3C2443_HCLKCON, clk, enable);
-}
-
-int s3c2443_clkcon_enable_p(struct clk *clk, int enable)
-{
-	return s3c2443_gate(S3C2443_PCLKCON, clk, enable);
-}
-
-int s3c2443_clkcon_enable_s(struct clk *clk, int enable)
-{
-	return s3c2443_gate(S3C2443_SCLKCON, clk, enable);
-}
-
-/* mpllref is a direct descendant of clk_xtal by default, but it is not
- * elided as the EPLL can be either sourced by the XTAL or EXTCLK and as
- * such directly equating the two source clocks is impossible.
- */
-static struct clk clk_mpllref = {
-	.name		= "mpllref",
-	.parent		= &clk_xtal,
-};
-
-static struct clk *clk_epllref_sources[] = {
-	[0] = &clk_mpllref,
-	[1] = &clk_mpllref,
-	[2] = &clk_xtal,
-	[3] = &clk_ext,
-};
-
-struct clksrc_clk clk_epllref = {
-	.clk	= {
-		.name		= "epllref",
-	},
-	.sources = &(struct clksrc_sources) {
-		.sources = clk_epllref_sources,
-		.nr_sources = ARRAY_SIZE(clk_epllref_sources),
-	},
-	.reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 7 },
-};
-
-/* esysclk
- *
- * this is sourced from either the EPLL or the EPLLref clock
-*/
-
-static struct clk *clk_sysclk_sources[] = {
-	[0] = &clk_epllref.clk,
-	[1] = &clk_epll,
-};
-
-struct clksrc_clk clk_esysclk = {
-	.clk	= {
-		.name		= "esysclk",
-		.parent		= &clk_epll,
-	},
-	.sources = &(struct clksrc_sources) {
-		.sources = clk_sysclk_sources,
-		.nr_sources = ARRAY_SIZE(clk_sysclk_sources),
-	},
-	.reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 6 },
-};
-
-static unsigned long s3c2443_getrate_mdivclk(struct clk *clk)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long div = __raw_readl(S3C2443_CLKDIV0);
-
-	div  &= S3C2443_CLKDIV0_EXTDIV_MASK;
-	div >>= (S3C2443_CLKDIV0_EXTDIV_SHIFT-1);	/* x2 */
-
-	return parent_rate / (div + 1);
-}
-
-static struct clk clk_mdivclk = {
-	.name		= "mdivclk",
-	.parent		= &clk_mpllref,
-	.ops		= &(struct clk_ops) {
-		.get_rate	= s3c2443_getrate_mdivclk,
-	},
-};
-
-static struct clk *clk_msysclk_sources[] = {
-	[0] = &clk_mpllref,
-	[1] = &clk_mpll,
-	[2] = &clk_mdivclk,
-	[3] = &clk_mpllref,
-};
-
-static struct clksrc_clk clk_msysclk = {
-	.clk	= {
-		.name		= "msysclk",
-		.parent		= &clk_xtal,
-	},
-	.sources = &(struct clksrc_sources) {
-		.sources = clk_msysclk_sources,
-		.nr_sources = ARRAY_SIZE(clk_msysclk_sources),
-	},
-	.reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 3 },
-};
-
-/* prediv
- *
- * this divides the msysclk down to pass to h/p/etc.
- */
-
-static unsigned long s3c2443_prediv_getrate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-	unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0);
-
-	clkdiv0 &= S3C2443_CLKDIV0_PREDIV_MASK;
-	clkdiv0 >>= S3C2443_CLKDIV0_PREDIV_SHIFT;
-
-	return rate / (clkdiv0 + 1);
-}
-
-static struct clk clk_prediv = {
-	.name		= "prediv",
-	.parent		= &clk_msysclk.clk,
-	.ops		= &(struct clk_ops) {
-		.get_rate	= s3c2443_prediv_getrate,
-	},
-};
-
-/* hclk divider
- *
- * divides the prediv and provides the hclk.
- */
-
-static unsigned long s3c2443_hclkdiv_getrate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-	unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0);
-
-	clkdiv0 &= S3C2443_CLKDIV0_HCLKDIV_MASK;
-
-	return rate / (clkdiv0 + 1);
-}
-
-static struct clk_ops clk_h_ops = {
-	.get_rate	= s3c2443_hclkdiv_getrate,
-};
-
-/* pclk divider
- *
- * divides the hclk and provides the pclk.
- */
-
-static unsigned long s3c2443_pclkdiv_getrate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-	unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0);
-
-	clkdiv0 = ((clkdiv0 & S3C2443_CLKDIV0_HALF_PCLK) ? 1 : 0);
-
-	return rate / (clkdiv0 + 1);
-}
-
-static struct clk_ops clk_p_ops = {
-	.get_rate	= s3c2443_pclkdiv_getrate,
-};
-
-/* armdiv
- *
- * this clock is sourced from msysclk and can have a number of
- * divider values applied to it to then be fed into armclk.
-*/
-
-static unsigned int *armdiv;
-static int nr_armdiv;
-static int armdivmask;
-
-static unsigned long s3c2443_armclk_roundrate(struct clk *clk,
-					      unsigned long rate)
-{
-	unsigned long parent = clk_get_rate(clk->parent);
-	unsigned long calc;
-	unsigned best = 256; /* bigger than any value */
-	unsigned div;
-	int ptr;
-
-	if (!nr_armdiv)
-		return -EINVAL;
-
-	for (ptr = 0; ptr < nr_armdiv; ptr++) {
-		div = armdiv[ptr];
-		if (div) {
-			/* cpufreq provides 266mhz as 266666000 not 266666666 */
-			calc = (parent / div / 1000) * 1000;
-			if (calc <= rate && div < best)
-				best = div;
-		}
-	}
-
-	return parent / best;
-}
-
-static unsigned long s3c2443_armclk_getrate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-	unsigned long clkcon0;
-	int val;
-
-	if (!nr_armdiv || !armdivmask)
-		return -EINVAL;
-
-	clkcon0 = __raw_readl(S3C2443_CLKDIV0);
-	clkcon0 &= armdivmask;
-	val = clkcon0 >> S3C2443_CLKDIV0_ARMDIV_SHIFT;
-
-	return rate / armdiv[val];
-}
-
-static int s3c2443_armclk_setrate(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent = clk_get_rate(clk->parent);
-	unsigned long calc;
-	unsigned div;
-	unsigned best = 256; /* bigger than any value */
-	int ptr;
-	int val = -1;
-
-	if (!nr_armdiv || !armdivmask)
-		return -EINVAL;
-
-	for (ptr = 0; ptr < nr_armdiv; ptr++) {
-		div = armdiv[ptr];
-		if (div) {
-			/* cpufreq provides 266mhz as 266666000 not 266666666 */
-			calc = (parent / div / 1000) * 1000;
-			if (calc <= rate && div < best) {
-				best = div;
-				val = ptr;
-			}
-		}
-	}
-
-	if (val >= 0) {
-		unsigned long clkcon0;
-
-		clkcon0 = __raw_readl(S3C2443_CLKDIV0);
-		clkcon0 &= ~armdivmask;
-		clkcon0 |= val << S3C2443_CLKDIV0_ARMDIV_SHIFT;
-		__raw_writel(clkcon0, S3C2443_CLKDIV0);
-	}
-
-	return (val == -1) ? -EINVAL : 0;
-}
-
-static struct clk clk_armdiv = {
-	.name		= "armdiv",
-	.parent		= &clk_msysclk.clk,
-	.ops		= &(struct clk_ops) {
-		.round_rate = s3c2443_armclk_roundrate,
-		.get_rate = s3c2443_armclk_getrate,
-		.set_rate = s3c2443_armclk_setrate,
-	},
-};
-
-/* armclk
- *
- * this is the clock fed into the ARM core itself, from armdiv or from hclk.
- */
-
-static struct clk *clk_arm_sources[] = {
-	[0] = &clk_armdiv,
-	[1] = &clk_h,
-};
-
-static struct clksrc_clk clk_arm = {
-	.clk	= {
-		.name		= "armclk",
-	},
-	.sources = &(struct clksrc_sources) {
-		.sources = clk_arm_sources,
-		.nr_sources = ARRAY_SIZE(clk_arm_sources),
-	},
-	.reg_src = { .reg = S3C2443_CLKDIV0, .size = 1, .shift = 13 },
-};
-
-/* usbhost
- *
- * usb host bus-clock, usually 48MHz to provide USB bus clock timing
-*/
-
-static struct clksrc_clk clk_usb_bus_host = {
-	.clk	= {
-		.name		= "usb-bus-host-parent",
-		.parent		= &clk_esysclk.clk,
-		.ctrlbit	= S3C2443_SCLKCON_USBHOST,
-		.enable		= s3c2443_clkcon_enable_s,
-	},
-	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 4 },
-};
-
-/* common clksrc clocks */
-
-static struct clksrc_clk clksrc_clks[] = {
-	{
-		/* camera interface bus-clock, divided down from esysclk */
-		.clk	= {
-			.name		= "camif-upll",	/* same as 2440 name */
-			.parent		= &clk_esysclk.clk,
-			.ctrlbit	= S3C2443_SCLKCON_CAMCLK,
-			.enable		= s3c2443_clkcon_enable_s,
-		},
-		.reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 26 },
-	}, {
-		.clk	= {
-			.name		= "display-if",
-			.parent		= &clk_esysclk.clk,
-			.ctrlbit	= S3C2443_SCLKCON_DISPCLK,
-			.enable		= s3c2443_clkcon_enable_s,
-		},
-		.reg_div = { .reg = S3C2443_CLKDIV1, .size = 8, .shift = 16 },
-	},
-};
-
-static struct clksrc_clk clk_esys_uart = {
-	/* ART baud-rate clock sourced from esysclk via a divisor */
-	.clk	= {
-		.name		= "uartclk",
-		.parent		= &clk_esysclk.clk,
-	},
-	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 8 },
-};
-
-static struct clk clk_i2s_ext = {
-	.name		= "i2s-ext",
-};
-
-/* i2s_eplldiv
- *
- * This clock is the output from the I2S divisor of ESYSCLK, and is separate
- * from the mux that comes after it (cannot merge into one single clock)
-*/
-
-static struct clksrc_clk clk_i2s_eplldiv = {
-	.clk	= {
-		.name		= "i2s-eplldiv",
-		.parent		= &clk_esysclk.clk,
-	},
-	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 12, },
-};
-
-/* i2s-ref
- *
- * i2s bus reference clock, selectable from external, esysclk or epllref
- *
- * Note, this used to be two clocks, but was compressed into one.
-*/
-
-static struct clk *clk_i2s_srclist[] = {
-	[0] = &clk_i2s_eplldiv.clk,
-	[1] = &clk_i2s_ext,
-	[2] = &clk_epllref.clk,
-	[3] = &clk_epllref.clk,
-};
-
-static struct clksrc_clk clk_i2s = {
-	.clk	= {
-		.name		= "i2s-if",
-		.ctrlbit	= S3C2443_SCLKCON_I2SCLK,
-		.enable		= s3c2443_clkcon_enable_s,
-
-	},
-	.sources = &(struct clksrc_sources) {
-		.sources = clk_i2s_srclist,
-		.nr_sources = ARRAY_SIZE(clk_i2s_srclist),
-	},
-	.reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 14 },
-};
-
-static struct clk init_clocks_off[] = {
-	{
-		.name		= "iis",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_IIS,
-	}, {
-		.name		= "adc",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_ADC,
-	}, {
-		.name		= "i2c",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_IIC,
-	}
-};
-
-static struct clk init_clocks[] = {
-	{
-		.name		= "dma.0",
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_DMA0,
-	}, {
-		.name		= "dma.1",
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_DMA1,
-	}, {
-		.name		= "dma.2",
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_DMA2,
-	}, {
-		.name		= "dma.3",
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_DMA3,
-	}, {
-		.name		= "dma.4",
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_DMA4,
-	}, {
-		.name		= "dma.5",
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_DMA5,
-	}, {
-		.name		= "gpio",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_GPIO,
-	}, {
-		.name		= "usb-host",
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_USBH,
-	}, {
-		.name		= "usb-device",
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_USBD,
-	}, {
-		.name		= "lcd",
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_LCDC,
-
-	}, {
-		.name		= "timers",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_PWMT,
-	}, {
-		.name		= "cfc",
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_CFC,
-	}, {
-		.name		= "ssmc",
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_SSMC,
-	}, {
-		.name		= "uart",
-		.devname	= "s3c2440-uart.0",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_UART0,
-	}, {
-		.name		= "uart",
-		.devname	= "s3c2440-uart.1",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_UART1,
-	}, {
-		.name		= "uart",
-		.devname	= "s3c2440-uart.2",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_UART2,
-	}, {
-		.name		= "uart",
-		.devname	= "s3c2440-uart.3",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_UART3,
-	}, {
-		.name		= "rtc",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_RTC,
-	}, {
-		.name		= "watchdog",
-		.parent		= &clk_p,
-		.ctrlbit	= S3C2443_PCLKCON_WDT,
-	}, {
-		.name		= "ac97",
-		.parent		= &clk_p,
-		.ctrlbit	= S3C2443_PCLKCON_AC97,
-	}, {
-		.name		= "nand",
-		.parent		= &clk_h,
-	}, {
-		.name		= "usb-bus-host",
-		.parent		= &clk_usb_bus_host.clk,
-	}
-};
-
-static struct clk hsmmc1_clk = {
-	.name		= "hsmmc",
-	.devname	= "s3c-sdhci.1",
-	.parent		= &clk_h,
-	.enable		= s3c2443_clkcon_enable_h,
-	.ctrlbit	= S3C2443_HCLKCON_HSMMC,
-};
-
-static struct clk hsspi_clk = {
-	.name		= "spi",
-	.devname	= "s3c2443-spi.0",
-	.parent		= &clk_p,
-	.enable		= s3c2443_clkcon_enable_p,
-	.ctrlbit	= S3C2443_PCLKCON_HSSPI,
-};
-
-/* EPLLCON compatible enough to get on/off information */
-
-void __init_or_cpufreq s3c2443_common_setup_clocks(pll_fn get_mpll)
-{
-	unsigned long epllcon = __raw_readl(S3C2443_EPLLCON);
-	unsigned long mpllcon = __raw_readl(S3C2443_MPLLCON);
-	struct clk *xtal_clk;
-	unsigned long xtal;
-	unsigned long pll;
-	int ptr;
-
-	xtal_clk = clk_get(NULL, "xtal");
-	xtal = clk_get_rate(xtal_clk);
-	clk_put(xtal_clk);
-
-	pll = get_mpll(mpllcon, xtal);
-	clk_msysclk.clk.rate = pll;
-	clk_mpll.rate = pll;
-
-	printk("CPU: MPLL %s %ld.%03ld MHz, cpu %ld.%03ld MHz, mem %ld.%03ld MHz, pclk %ld.%03ld MHz\n",
-	       (mpllcon & S3C2443_PLLCON_OFF) ? "off" : "on",
-	       print_mhz(pll), print_mhz(clk_get_rate(&clk_armdiv)),
-	       print_mhz(clk_get_rate(&clk_h)),
-	       print_mhz(clk_get_rate(&clk_p)));
-
-	for (ptr = 0; ptr < ARRAY_SIZE(clksrc_clks); ptr++)
-		s3c_set_clksrc(&clksrc_clks[ptr], true);
-
-	/* ensure usb bus clock is within correct rate of 48MHz */
-
-	if (clk_get_rate(&clk_usb_bus_host.clk) != (48 * 1000 * 1000)) {
-		printk(KERN_INFO "Warning: USB host bus not at 48MHz\n");
-		clk_set_rate(&clk_usb_bus_host.clk, 48*1000*1000);
-	}
-
-	printk("CPU: EPLL %s %ld.%03ld MHz, usb-bus %ld.%03ld MHz\n",
-	       (epllcon & S3C2443_PLLCON_OFF) ? "off" : "on",
-	       print_mhz(clk_get_rate(&clk_epll)),
-	       print_mhz(clk_get_rate(&clk_usb_bus)));
-}
-
-static struct clk *clks[] __initdata = {
-	&clk_prediv,
-	&clk_mpllref,
-	&clk_mdivclk,
-	&clk_ext,
-	&clk_epll,
-	&clk_usb_bus,
-	&clk_armdiv,
-	&hsmmc1_clk,
-	&hsspi_clk,
-};
-
-static struct clksrc_clk *clksrcs[] __initdata = {
-	&clk_i2s_eplldiv,
-	&clk_i2s,
-	&clk_usb_bus_host,
-	&clk_epllref,
-	&clk_esysclk,
-	&clk_msysclk,
-	&clk_arm,
-};
-
-static struct clk_lookup s3c2443_clk_lookup[] = {
-	CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk),
-	CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
-	CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_esys_uart.clk),
-	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.0", &hsmmc1_clk),
-	CLKDEV_INIT("s3c2443-spi.0", "spi_busclk0", &hsspi_clk),
-};
-
-void __init s3c2443_common_init_clocks(int xtal, pll_fn get_mpll,
-				       unsigned int *divs, int nr_divs,
-				       int divmask)
-{
-	int ptr;
-
-	armdiv = divs;
-	nr_armdiv = nr_divs;
-	armdivmask = divmask;
-
-	/* s3c2443 parents h clock from prediv */
-	clk_h.parent = &clk_prediv;
-	clk_h.ops = &clk_h_ops;
-
-	/* and p clock from h clock */
-	clk_p.parent = &clk_h;
-	clk_p.ops = &clk_p_ops;
-
-	clk_usb_bus.parent = &clk_usb_bus_host.clk;
-	clk_epll.parent = &clk_epllref.clk;
-
-	s3c24xx_register_baseclocks(xtal);
-	s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
-
-	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
-		s3c_register_clksrc(clksrcs[ptr], 1);
-
-	s3c_register_clksrc(clksrc_clks, ARRAY_SIZE(clksrc_clks));
-	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
-
-	/* See s3c2443/etc notes on disabling clocks at init time */
-	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-	clkdev_add_table(s3c2443_clk_lookup, ARRAY_SIZE(s3c2443_clk_lookup));
-
-	s3c2443_common_setup_clocks(get_mpll);
-}

arch/arm/mach-s3c24xx/common.c

@@ -53,6 +53,7 @@
 #include <plat/cpu-freq.h>
 #include <plat/pll.h>
 #include <plat/pwm-core.h>
+#include <plat/watchdog-reset.h>
 
 #include "common.h"
 
@@ -73,7 +74,6 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.idcode		= 0x32410000,
 		.idmask		= 0xffffffff,
 		.map_io		= s3c2410_map_io,
-		.init_clocks	= s3c2410_init_clocks,
 		.init_uarts	= s3c2410_init_uarts,
 		.init		= s3c2410_init,
 		.name		= name_s3c2410
@@ -82,7 +82,6 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.idcode		= 0x32410002,
 		.idmask		= 0xffffffff,
 		.map_io		= s3c2410_map_io,
-		.init_clocks	= s3c2410_init_clocks,
 		.init_uarts	= s3c2410_init_uarts,
 		.init		= s3c2410a_init,
 		.name		= name_s3c2410a
@@ -91,7 +90,6 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.idcode		= 0x32440000,
 		.idmask		= 0xffffffff,
 		.map_io		= s3c2440_map_io,
-		.init_clocks	= s3c244x_init_clocks,
 		.init_uarts	= s3c244x_init_uarts,
 		.init		= s3c2440_init,
 		.name		= name_s3c2440
@@ -100,7 +98,6 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.idcode		= 0x32440001,
 		.idmask		= 0xffffffff,
 		.map_io		= s3c2440_map_io,
-		.init_clocks	= s3c244x_init_clocks,
 		.init_uarts	= s3c244x_init_uarts,
 		.init		= s3c2440_init,
 		.name		= name_s3c2440a
@@ -109,7 +106,6 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.idcode		= 0x32440aaa,
 		.idmask		= 0xffffffff,
 		.map_io		= s3c2442_map_io,
-		.init_clocks	= s3c244x_init_clocks,
 		.init_uarts	= s3c244x_init_uarts,
 		.init		= s3c2442_init,
 		.name		= name_s3c2442
@@ -118,7 +114,6 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.idcode		= 0x32440aab,
 		.idmask		= 0xffffffff,
 		.map_io		= s3c2442_map_io,
-		.init_clocks	= s3c244x_init_clocks,
 		.init_uarts	= s3c244x_init_uarts,
 		.init		= s3c2442_init,
 		.name		= name_s3c2442b
@@ -127,7 +122,6 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.idcode		= 0x32412001,
 		.idmask		= 0xffffffff,
 		.map_io		= s3c2412_map_io,
-		.init_clocks	= s3c2412_init_clocks,
 		.init_uarts	= s3c2412_init_uarts,
 		.init		= s3c2412_init,
 		.name		= name_s3c2412,
@@ -136,7 +130,6 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.idcode		= 0x32412003,
 		.idmask		= 0xffffffff,
 		.map_io		= s3c2412_map_io,
-		.init_clocks	= s3c2412_init_clocks,
 		.init_uarts	= s3c2412_init_uarts,
 		.init		= s3c2412_init,
 		.name		= name_s3c2412,
@@ -145,7 +138,6 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.idcode		= 0x32450003,
 		.idmask		= 0xffffffff,
 		.map_io		= s3c2416_map_io,
-		.init_clocks	= s3c2416_init_clocks,
 		.init_uarts	= s3c2416_init_uarts,
 		.init		= s3c2416_init,
 		.name		= name_s3c2416,
@@ -154,7 +146,6 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.idcode		= 0x32443001,
 		.idmask		= 0xffffffff,
 		.map_io		= s3c2443_map_io,
-		.init_clocks	= s3c2443_init_clocks,
 		.init_uarts	= s3c2443_init_uarts,
 		.init		= s3c2443_init,
 		.name		= name_s3c2443,
@@ -316,21 +307,6 @@ struct s3c24xx_uart_resources s3c2410_uart_resources[] __initdata = {
 	},
 };
 
-/* initialise all the clocks */
-
-void __init_or_cpufreq s3c24xx_setup_clocks(unsigned long fclk,
-					   unsigned long hclk,
-					   unsigned long pclk)
-{
-	clk_upll.rate = s3c24xx_get_pll(__raw_readl(S3C2410_UPLLCON),
-					clk_xtal.rate);
-
-	clk_mpll.rate = fclk;
-	clk_h.rate = hclk;
-	clk_p.rate = pclk;
-	clk_f.rate = fclk;
-}
-
 #if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \
 	defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
 static struct resource s3c2410_dma_resource[] = {
@@ -534,3 +510,62 @@ struct platform_device s3c2443_device_dma = {
 	},
 };
 #endif
+
+#if defined(CONFIG_COMMON_CLK) && defined(CONFIG_CPU_S3C2410)
+void __init s3c2410_init_clocks(int xtal)
+{
+	s3c2410_common_clk_init(NULL, xtal, 0, S3C24XX_VA_CLKPWR);
+	samsung_wdt_reset_init(S3C24XX_VA_WATCHDOG);
+}
+#endif
+
+#ifdef CONFIG_CPU_S3C2412
+void __init s3c2412_init_clocks(int xtal)
+{
+	s3c2412_common_clk_init(NULL, xtal, 0, S3C24XX_VA_CLKPWR);
+}
+#endif
+
+#ifdef CONFIG_CPU_S3C2416
+void __init s3c2416_init_clocks(int xtal)
+{
+	s3c2443_common_clk_init(NULL, xtal, 0, S3C24XX_VA_CLKPWR);
+}
+#endif
+
+#if defined(CONFIG_COMMON_CLK) && defined(CONFIG_CPU_S3C2440)
+void __init s3c2440_init_clocks(int xtal)
+{
+	s3c2410_common_clk_init(NULL, xtal, 1, S3C24XX_VA_CLKPWR);
+	samsung_wdt_reset_init(S3C24XX_VA_WATCHDOG);
+}
+#endif
+
+#if defined(CONFIG_COMMON_CLK) && defined(CONFIG_CPU_S3C2442)
+void __init s3c2442_init_clocks(int xtal)
+{
+	s3c2410_common_clk_init(NULL, xtal, 2, S3C24XX_VA_CLKPWR);
+	samsung_wdt_reset_init(S3C24XX_VA_WATCHDOG);
+}
+#endif
+
+#ifdef CONFIG_CPU_S3C2443
+void __init s3c2443_init_clocks(int xtal)
+{
+	s3c2443_common_clk_init(NULL, xtal, 1, S3C24XX_VA_CLKPWR);
+}
+#endif
+
+#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2440) || \
+	defined(CONFIG_CPU_S3C2442)
+static struct resource s3c2410_dclk_resource[] = {
+	[0] = DEFINE_RES_MEM(0x56000084, 0x4),
+};
+
+struct platform_device s3c2410_device_dclk = {
+	.name		= "s3c2410-dclk",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(s3c2410_dclk_resource),
+	.resource	= s3c2410_dclk_resource,
+};
+#endif

arch/arm/mach-s3c24xx/common.h

@@ -67,16 +67,15 @@ extern struct syscore_ops s3c2416_irq_syscore_ops;
 #if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
 extern void s3c244x_map_io(void);
 extern void s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-extern void s3c244x_init_clocks(int xtal);
 extern void s3c244x_restart(enum reboot_mode mode, const char *cmd);
 #else
-#define s3c244x_init_clocks NULL
 #define s3c244x_init_uarts NULL
 #endif
 
 #ifdef CONFIG_CPU_S3C2440
 extern  int s3c2440_init(void);
 extern void s3c2440_map_io(void);
+extern void s3c2440_init_clocks(int xtal);
 extern void s3c2440_init_irq(void);
 #else
 #define s3c2440_init NULL
@@ -86,6 +85,7 @@ extern void s3c2440_init_irq(void);
 #ifdef CONFIG_CPU_S3C2442
 extern  int s3c2442_init(void);
 extern void s3c2442_map_io(void);
+extern void s3c2442_init_clocks(int xtal);
 extern void s3c2442_init_irq(void);
 #else
 #define s3c2442_init NULL
@@ -114,4 +114,21 @@ extern struct platform_device s3c2412_device_dma;
 extern struct platform_device s3c2440_device_dma;
 extern struct platform_device s3c2443_device_dma;
 
+extern struct platform_device s3c2410_device_dclk;
+
+#ifdef CONFIG_S3C2410_COMMON_CLK
+void __init s3c2410_common_clk_init(struct device_node *np, unsigned long xti_f,
+				    int current_soc,
+				    void __iomem *reg_base);
+#endif
+#ifdef CONFIG_S3C2412_COMMON_CLK
+void __init s3c2412_common_clk_init(struct device_node *np, unsigned long xti_f,
+				unsigned long ext_f, void __iomem *reg_base);
+#endif
+#ifdef CONFIG_S3C2443_COMMON_CLK
+void __init s3c2443_common_clk_init(struct device_node *np, unsigned long xti_f,
+				    int current_soc,
+				    void __iomem *reg_base);
+#endif
+
 #endif /* __ARCH_ARM_MACH_S3C24XX_COMMON_H */

arch/arm/mach-s3c24xx/cpufreq-utils.c

@@ -14,6 +14,7 @@
 #include <linux/errno.h>
 #include <linux/cpufreq.h>
 #include <linux/io.h>
+#include <linux/clk.h>
 
 #include <mach/map.h>
 #include <mach/regs-clock.h>
@@ -60,5 +61,6 @@ void s3c2410_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
  */
 void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg)
 {
-	__raw_writel(cfg->pll.driver_data, S3C2410_MPLLCON);
+	if (!IS_ERR(cfg->mpll))
+		clk_set_rate(cfg->mpll, cfg->pll.frequency);
 }

arch/arm/mach-s3c24xx/include/mach/regs-clock.h

@@ -42,24 +42,6 @@
 #define S3C2410_CLKCON_IIS	     (1<<17)
 #define S3C2410_CLKCON_SPI	     (1<<18)
 
-/* DCLKCON register addresses in gpio.h */
-
-#define S3C2410_DCLKCON_DCLK0EN	     (1<<0)
-#define S3C2410_DCLKCON_DCLK0_PCLK   (0<<1)
-#define S3C2410_DCLKCON_DCLK0_UCLK   (1<<1)
-#define S3C2410_DCLKCON_DCLK0_DIV(x) (((x) - 1 )<<4)
-#define S3C2410_DCLKCON_DCLK0_CMP(x) (((x) - 1 )<<8)
-#define S3C2410_DCLKCON_DCLK0_DIV_MASK ((0xf)<<4)
-#define S3C2410_DCLKCON_DCLK0_CMP_MASK ((0xf)<<8)
-
-#define S3C2410_DCLKCON_DCLK1EN	     (1<<16)
-#define S3C2410_DCLKCON_DCLK1_PCLK   (0<<17)
-#define S3C2410_DCLKCON_DCLK1_UCLK   (1<<17)
-#define S3C2410_DCLKCON_DCLK1_DIV(x) (((x) - 1) <<20)
-#define S3C2410_DCLKCON_DCLK1_CMP(x) (((x) - 1) <<24)
-#define S3C2410_DCLKCON_DCLK1_DIV_MASK ((0xf) <<20)
-#define S3C2410_DCLKCON_DCLK1_CMP_MASK ((0xf) <<24)
-
 #define S3C2410_CLKDIVN_PDIVN	     (1<<0)
 #define S3C2410_CLKDIVN_HDIVN	     (1<<1)
 

arch/arm/mach-s3c24xx/include/mach/regs-gpio.h

@@ -457,9 +457,6 @@
 
 /* miscellaneous control */
 #define S3C2410_MISCCR	   S3C2410_GPIOREG(0x80)
-#define S3C2410_DCLKCON	   S3C2410_GPIOREG(0x84)
-
-#define S3C24XX_DCLKCON	   S3C24XX_GPIOREG2(0x84)
 
 /* see clock.h for dclk definitions */
 

arch/arm/mach-s3c24xx/mach-amlm5900.c

@@ -161,11 +161,16 @@ static struct platform_device *amlm5900_devices[] __initdata = {
 static void __init amlm5900_map_io(void)
 {
 	s3c24xx_init_io(amlm5900_iodesc, ARRAY_SIZE(amlm5900_iodesc));
-	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(amlm5900_uartcfgs, ARRAY_SIZE(amlm5900_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init amlm5900_init_time(void)
+{
+	s3c2410_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 #ifdef CONFIG_FB_S3C2410
 static struct s3c2410fb_display __initdata amlm5900_lcd_info = {
 	.width		= 160,
@@ -241,6 +246,6 @@ MACHINE_START(AML_M5900, "AML_M5900")
 	.map_io		= amlm5900_map_io,
 	.init_irq	= s3c2410_init_irq,
 	.init_machine	= amlm5900_init,
-	.init_time	= samsung_timer_init,
+	.init_time	= amlm5900_init_time,
 	.restart	= s3c2410_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-anubis.c

@@ -46,7 +46,6 @@
 
 #include <net/ax88796.h>
 
-#include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <linux/platform_data/asoc-s3c24xx_simtec.h>
@@ -352,6 +351,7 @@ static struct platform_device anubis_device_sm501 = {
 /* Standard Anubis devices */
 
 static struct platform_device *anubis_devices[] __initdata = {
+	&s3c2410_device_dclk,
 	&s3c_device_ohci,
 	&s3c_device_wdt,
 	&s3c_device_adc,
@@ -364,14 +364,6 @@ static struct platform_device *anubis_devices[] __initdata = {
 	&anubis_device_sm501,
 };
 
-static struct clk *anubis_clocks[] __initdata = {
-	&s3c24xx_dclk0,
-	&s3c24xx_dclk1,
-	&s3c24xx_clkout0,
-	&s3c24xx_clkout1,
-	&s3c24xx_uclk,
-};
-
 /* I2C devices. */
 
 static struct i2c_board_info anubis_i2c_devs[] __initdata = {
@@ -394,23 +386,7 @@ static struct s3c24xx_audio_simtec_pdata __initdata anubis_audio = {
 
 static void __init anubis_map_io(void)
 {
-	/* initialise the clocks */
-
-	s3c24xx_dclk0.parent = &clk_upll;
-	s3c24xx_dclk0.rate   = 12*1000*1000;
-
-	s3c24xx_dclk1.parent = &clk_upll;
-	s3c24xx_dclk1.rate   = 24*1000*1000;
-
-	s3c24xx_clkout0.parent  = &s3c24xx_dclk0;
-	s3c24xx_clkout1.parent  = &s3c24xx_dclk1;
-
-	s3c24xx_uclk.parent  = &s3c24xx_clkout1;
-
-	s3c24xx_register_clocks(anubis_clocks, ARRAY_SIZE(anubis_clocks));
-
 	s3c24xx_init_io(anubis_iodesc, ARRAY_SIZE(anubis_iodesc));
-	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(anubis_uartcfgs, ARRAY_SIZE(anubis_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 
@@ -428,6 +404,12 @@ static void __init anubis_map_io(void)
 	}
 }
 
+static void __init anubis_init_time(void)
+{
+	s3c2440_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 static void __init anubis_init(void)
 {
 	s3c_i2c0_set_platdata(NULL);
@@ -447,6 +429,6 @@ MACHINE_START(ANUBIS, "Simtec-Anubis")
 	.map_io		= anubis_map_io,
 	.init_machine	= anubis_init,
 	.init_irq	= s3c2440_init_irq,
-	.init_time	= samsung_timer_init,
+	.init_time	= anubis_init_time,
 	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-at2440evb.c

@@ -45,7 +45,6 @@
 #include <linux/mtd/nand_ecc.h>
 #include <linux/mtd/partitions.h>
 
-#include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <linux/platform_data/mmc-s3cmci.h>
@@ -192,11 +191,16 @@ static struct platform_device *at2440evb_devices[] __initdata = {
 static void __init at2440evb_map_io(void)
 {
 	s3c24xx_init_io(at2440evb_iodesc, ARRAY_SIZE(at2440evb_iodesc));
-	s3c24xx_init_clocks(16934400);
 	s3c24xx_init_uarts(at2440evb_uartcfgs, ARRAY_SIZE(at2440evb_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init at2440evb_init_time(void)
+{
+	s3c2440_init_clocks(16934400);
+	samsung_timer_init();
+}
+
 static void __init at2440evb_init(void)
 {
 	s3c24xx_fb_set_platdata(&at2440evb_fb_info);
@@ -213,6 +217,6 @@ MACHINE_START(AT2440EVB, "AT2440EVB")
 	.map_io		= at2440evb_map_io,
 	.init_machine	= at2440evb_init,
 	.init_irq	= s3c2440_init_irq,
-	.init_time	= samsung_timer_init,
+	.init_time	= at2440evb_init_time,
 	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-bast.c

@@ -51,7 +51,6 @@
 #include <mach/regs-lcd.h>
 #include <mach/gpio-samsung.h>
 
-#include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/cpu-freq.h>
 #include <plat/devs.h>
@@ -523,6 +522,7 @@ static struct s3c_hwmon_pdata bast_hwmon_info = {
 // cat /sys/devices/platform/s3c24xx-adc/s3c-hwmon/in_0
 
 static struct platform_device *bast_devices[] __initdata = {
+	&s3c2410_device_dclk,
 	&s3c_device_ohci,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
@@ -537,14 +537,6 @@ static struct platform_device *bast_devices[] __initdata = {
 	&bast_sio,
 };
 
-static struct clk *bast_clocks[] __initdata = {
-	&s3c24xx_dclk0,
-	&s3c24xx_dclk1,
-	&s3c24xx_clkout0,
-	&s3c24xx_clkout1,
-	&s3c24xx_uclk,
-};
-
 static struct s3c_cpufreq_board __initdata bast_cpufreq = {
 	.refresh	= 7800, /* 7.8usec */
 	.auto_io	= 1,
@@ -558,29 +550,19 @@ static struct s3c24xx_audio_simtec_pdata __initdata bast_audio = {
 
 static void __init bast_map_io(void)
 {
-	/* initialise the clocks */
-
-	s3c24xx_dclk0.parent = &clk_upll;
-	s3c24xx_dclk0.rate   = 12*1000*1000;
-
-	s3c24xx_dclk1.parent = &clk_upll;
-	s3c24xx_dclk1.rate   = 24*1000*1000;
-
-	s3c24xx_clkout0.parent  = &s3c24xx_dclk0;
-	s3c24xx_clkout1.parent  = &s3c24xx_dclk1;
-
-	s3c24xx_uclk.parent  = &s3c24xx_clkout1;
-
-	s3c24xx_register_clocks(bast_clocks, ARRAY_SIZE(bast_clocks));
-
 	s3c_hwmon_set_platdata(&bast_hwmon_info);
 
 	s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
-	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(bast_uartcfgs, ARRAY_SIZE(bast_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init bast_init_time(void)
+{
+	s3c2410_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 static void __init bast_init(void)
 {
 	register_syscore_ops(&bast_pm_syscore_ops);
@@ -608,6 +590,6 @@ MACHINE_START(BAST, "Simtec-BAST")
 	.map_io		= bast_map_io,
 	.init_irq	= s3c2410_init_irq,
 	.init_machine	= bast_init,
-	.init_time	= samsung_timer_init,
+	.init_time	= bast_init_time,
 	.restart	= s3c2410_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-gta02.c

@@ -501,7 +501,6 @@ static struct platform_device gta02_buttons_device = {
 static void __init gta02_map_io(void)
 {
 	s3c24xx_init_io(gta02_iodesc, ARRAY_SIZE(gta02_iodesc));
-	s3c24xx_init_clocks(12000000);
 	s3c24xx_init_uarts(gta02_uartcfgs, ARRAY_SIZE(gta02_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
@@ -585,6 +584,11 @@ static void __init gta02_machine_init(void)
 	regulator_has_full_constraints();
 }
 
+static void __init gta02_init_time(void)
+{
+	s3c2442_init_clocks(12000000);
+	samsung_timer_init();
+}
 
 MACHINE_START(NEO1973_GTA02, "GTA02")
 	/* Maintainer: Nelson Castillo <arhuaco@freaks-unidos.net> */
@@ -592,6 +596,6 @@ MACHINE_START(NEO1973_GTA02, "GTA02")
 	.map_io		= gta02_map_io,
 	.init_irq	= s3c2442_init_irq,
 	.init_machine	= gta02_machine_init,
-	.init_time	= samsung_timer_init,
+	.init_time	= gta02_init_time,
 	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-h1940.c

@@ -57,7 +57,6 @@
 #include <mach/regs-lcd.h>
 #include <mach/gpio-samsung.h>
 
-#include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/gpio-cfg.h>
@@ -646,7 +645,6 @@ static struct platform_device *h1940_devices[] __initdata = {
 static void __init h1940_map_io(void)
 {
 	s3c24xx_init_io(h1940_iodesc, ARRAY_SIZE(h1940_iodesc));
-	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(h1940_uartcfgs, ARRAY_SIZE(h1940_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 
@@ -662,6 +660,12 @@ static void __init h1940_map_io(void)
 	WARN_ON(gpiochip_add(&h1940_latch_gpiochip));
 }
 
+static void __init h1940_init_time(void)
+{
+	s3c2410_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 /* H1940 and RX3715 need to reserve this for suspend */
 static void __init h1940_reserve(void)
 {
@@ -739,6 +743,6 @@ MACHINE_START(H1940, "IPAQ-H1940")
 	.reserve	= h1940_reserve,
 	.init_irq	= s3c2410_init_irq,
 	.init_machine	= h1940_init,
-	.init_time	= samsung_timer_init,
+	.init_time	= h1940_init_time,
 	.restart	= s3c2410_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-jive.c

@@ -507,11 +507,16 @@ static struct syscore_ops jive_pm_syscore_ops = {
 static void __init jive_map_io(void)
 {
 	s3c24xx_init_io(jive_iodesc, ARRAY_SIZE(jive_iodesc));
-	s3c24xx_init_clocks(12000000);
 	s3c24xx_init_uarts(jive_uartcfgs, ARRAY_SIZE(jive_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init jive_init_time(void)
+{
+	s3c2412_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 static void jive_power_off(void)
 {
 	printk(KERN_INFO "powering system down...\n");
@@ -665,6 +670,6 @@ MACHINE_START(JIVE, "JIVE")
 	.init_irq	= s3c2412_init_irq,
 	.map_io		= jive_map_io,
 	.init_machine	= jive_machine_init,
-	.init_time	= samsung_timer_init,
+	.init_time	= jive_init_time,
 	.restart	= s3c2412_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-mini2440.c

@@ -54,7 +54,6 @@
 #include <linux/mtd/partitions.h>
 
 #include <plat/gpio-cfg.h>
-#include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/samsung-time.h>
@@ -525,11 +524,16 @@ static struct platform_device *mini2440_devices[] __initdata = {
 static void __init mini2440_map_io(void)
 {
 	s3c24xx_init_io(mini2440_iodesc, ARRAY_SIZE(mini2440_iodesc));
-	s3c24xx_init_clocks(12000000);
 	s3c24xx_init_uarts(mini2440_uartcfgs, ARRAY_SIZE(mini2440_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init mini2440_init_time(void)
+{
+	s3c2440_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 /*
  * mini2440_features string
  *
@@ -690,6 +694,6 @@ MACHINE_START(MINI2440, "MINI2440")
 	.map_io		= mini2440_map_io,
 	.init_machine	= mini2440_init,
 	.init_irq	= s3c2440_init_irq,
-	.init_time	= samsung_timer_init,
+	.init_time	= mini2440_init_time,
 	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-n30.c

@@ -45,7 +45,6 @@
 
 #include <linux/platform_data/i2c-s3c2410.h>
 
-#include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <linux/platform_data/mmc-s3cmci.h>
@@ -535,11 +534,16 @@ static void __init n30_map_io(void)
 {
 	s3c24xx_init_io(n30_iodesc, ARRAY_SIZE(n30_iodesc));
 	n30_hwinit();
-	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(n30_uartcfgs, ARRAY_SIZE(n30_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init n30_init_time(void)
+{
+	s3c2410_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 /* GPB3 is the line that controls the pull-up for the USB D+ line */
 
 static void __init n30_init(void)
@@ -591,7 +595,7 @@ MACHINE_START(N30, "Acer-N30")
 				Ben Dooks <ben-linux@fluff.org>
 	*/
 	.atag_offset	= 0x100,
-	.init_time	= samsung_timer_init,
+	.init_time	= n30_init_time,
 	.init_machine	= n30_init,
 	.init_irq	= s3c2410_init_irq,
 	.map_io		= n30_map_io,
@@ -602,7 +606,7 @@ MACHINE_START(N35, "Acer-N35")
 	/* Maintainer: Christer Weinigel <christer@weinigel.se>
 	*/
 	.atag_offset	= 0x100,
-	.init_time	= samsung_timer_init,
+	.init_time	= n30_init_time,
 	.init_machine	= n30_init,
 	.init_irq	= s3c2410_init_irq,
 	.map_io		= n30_map_io,

arch/arm/mach-s3c24xx/mach-nexcoder.c

@@ -42,7 +42,6 @@
 #include <linux/platform_data/i2c-s3c2410.h>
 
 #include <plat/gpio-cfg.h>
-#include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/samsung-time.h>
@@ -135,13 +134,18 @@ static void __init nexcoder_sensorboard_init(void)
 static void __init nexcoder_map_io(void)
 {
 	s3c24xx_init_io(nexcoder_iodesc, ARRAY_SIZE(nexcoder_iodesc));
-	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(nexcoder_uartcfgs, ARRAY_SIZE(nexcoder_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 
 	nexcoder_sensorboard_init();
 }
 
+static void __init nexcoder_init_time(void)
+{
+	s3c2440_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 static void __init nexcoder_init(void)
 {
 	s3c_i2c0_set_platdata(NULL);
@@ -154,6 +158,6 @@ MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440")
 	.map_io		= nexcoder_map_io,
 	.init_machine	= nexcoder_init,
 	.init_irq	= s3c2440_init_irq,
-	.init_time	= samsung_timer_init,
+	.init_time	= nexcoder_init_time,
 	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-osiris.c

@@ -40,7 +40,6 @@
 #include <linux/mtd/nand_ecc.h>
 #include <linux/mtd/partitions.h>
 
-#include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/cpu-freq.h>
 #include <plat/devs.h>
@@ -344,20 +343,13 @@ static struct i2c_board_info osiris_i2c_devs[] __initdata = {
 /* Standard Osiris devices */
 
 static struct platform_device *osiris_devices[] __initdata = {
+	&s3c2410_device_dclk,
 	&s3c_device_i2c0,
 	&s3c_device_wdt,
 	&s3c_device_nand,
 	&osiris_pcmcia,
 };
 
-static struct clk *osiris_clocks[] __initdata = {
-	&s3c24xx_dclk0,
-	&s3c24xx_dclk1,
-	&s3c24xx_clkout0,
-	&s3c24xx_clkout1,
-	&s3c24xx_uclk,
-};
-
 static struct s3c_cpufreq_board __initdata osiris_cpufreq = {
 	.refresh	= 7800, /* refresh period is 7.8usec */
 	.auto_io	= 1,
@@ -368,23 +360,7 @@ static void __init osiris_map_io(void)
 {
 	unsigned long flags;
 
-	/* initialise the clocks */
-
-	s3c24xx_dclk0.parent = &clk_upll;
-	s3c24xx_dclk0.rate   = 12*1000*1000;
-
-	s3c24xx_dclk1.parent = &clk_upll;
-	s3c24xx_dclk1.rate   = 24*1000*1000;
-
-	s3c24xx_clkout0.parent  = &s3c24xx_dclk0;
-	s3c24xx_clkout1.parent  = &s3c24xx_dclk1;
-
-	s3c24xx_uclk.parent  = &s3c24xx_clkout1;
-
-	s3c24xx_register_clocks(osiris_clocks, ARRAY_SIZE(osiris_clocks));
-
 	s3c24xx_init_io(osiris_iodesc, ARRAY_SIZE(osiris_iodesc));
-	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(osiris_uartcfgs, ARRAY_SIZE(osiris_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 
@@ -408,6 +384,12 @@ static void __init osiris_map_io(void)
 	local_irq_restore(flags);
 }
 
+static void __init osiris_init_time(void)
+{
+	s3c2440_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 static void __init osiris_init(void)
 {
 	register_syscore_ops(&osiris_pm_syscore_ops);
@@ -429,6 +411,6 @@ MACHINE_START(OSIRIS, "Simtec-OSIRIS")
 	.map_io		= osiris_map_io,
 	.init_irq	= s3c2440_init_irq,
 	.init_machine	= osiris_init,
-	.init_time	= samsung_timer_init,
+	.init_time	= osiris_init_time,
 	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-otom.c

@@ -30,7 +30,6 @@
 #include <mach/hardware.h>
 #include <mach/regs-gpio.h>
 
-#include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/samsung-time.h>
@@ -100,11 +99,16 @@ static struct platform_device *otom11_devices[] __initdata = {
 static void __init otom11_map_io(void)
 {
 	s3c24xx_init_io(otom11_iodesc, ARRAY_SIZE(otom11_iodesc));
-	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(otom11_uartcfgs, ARRAY_SIZE(otom11_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init otom11_init_time(void)
+{
+	s3c2410_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 static void __init otom11_init(void)
 {
 	s3c_i2c0_set_platdata(NULL);
@@ -117,6 +121,6 @@ MACHINE_START(OTOM, "Nex Vision - Otom 1.1")
 	.map_io		= otom11_map_io,
 	.init_machine	= otom11_init,
 	.init_irq	= s3c2410_init_irq,
-	.init_time	= samsung_timer_init,
+	.init_time	= otom11_init_time,
 	.restart	= s3c2410_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-qt2410.c

@@ -304,11 +304,16 @@ __setup("tft=", qt2410_tft_setup);
 static void __init qt2410_map_io(void)
 {
 	s3c24xx_init_io(qt2410_iodesc, ARRAY_SIZE(qt2410_iodesc));
-	s3c24xx_init_clocks(12*1000*1000);
 	s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init qt2410_init_time(void)
+{
+	s3c2410_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 static void __init qt2410_machine_init(void)
 {
 	s3c_nand_set_platdata(&qt2410_nand_info);
@@ -346,6 +351,6 @@ MACHINE_START(QT2410, "QT2410")
 	.map_io		= qt2410_map_io,
 	.init_irq	= s3c2410_init_irq,
 	.init_machine	= qt2410_machine_init,
-	.init_time	= samsung_timer_init,
+	.init_time	= qt2410_init_time,
 	.restart	= s3c2410_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-rx1950.c

@@ -54,7 +54,6 @@
 #include <mach/regs-lcd.h>
 #include <mach/gpio-samsung.h>
 
-#include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/pm.h>
@@ -710,6 +709,7 @@ static struct i2c_board_info rx1950_i2c_devices[] = {
 };
 
 static struct platform_device *rx1950_devices[] __initdata = {
+	&s3c2410_device_dclk,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
@@ -728,20 +728,9 @@ static struct platform_device *rx1950_devices[] __initdata = {
 	&rx1950_leds,
 };
 
-static struct clk *rx1950_clocks[] __initdata = {
-	&s3c24xx_clkout0,
-	&s3c24xx_clkout1,
-};
-
 static void __init rx1950_map_io(void)
 {
-	s3c24xx_clkout0.parent  = &clk_h;
-	s3c24xx_clkout1.parent  = &clk_f;
-
-	s3c24xx_register_clocks(rx1950_clocks, ARRAY_SIZE(rx1950_clocks));
-
 	s3c24xx_init_io(rx1950_iodesc, ARRAY_SIZE(rx1950_iodesc));
-	s3c24xx_init_clocks(16934000);
 	s3c24xx_init_uarts(rx1950_uartcfgs, ARRAY_SIZE(rx1950_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 
@@ -754,6 +743,12 @@ static void __init rx1950_map_io(void)
 	s3c_pm_init();
 }
 
+static void __init rx1950_init_time(void)
+{
+	s3c2442_init_clocks(16934000);
+	samsung_timer_init();
+}
+
 static void __init rx1950_init_machine(void)
 {
 	int i;
@@ -816,6 +811,6 @@ MACHINE_START(RX1950, "HP iPAQ RX1950")
 	.reserve	= rx1950_reserve,
 	.init_irq	= s3c2442_init_irq,
 	.init_machine = rx1950_init_machine,
-	.init_time	= samsung_timer_init,
+	.init_time	= rx1950_init_time,
 	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-rx3715.c

@@ -46,7 +46,6 @@
 #include <mach/regs-lcd.h>
 #include <mach/gpio-samsung.h>
 
-#include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/pm.h>
@@ -179,11 +178,16 @@ static struct platform_device *rx3715_devices[] __initdata = {
 static void __init rx3715_map_io(void)
 {
 	s3c24xx_init_io(rx3715_iodesc, ARRAY_SIZE(rx3715_iodesc));
-	s3c24xx_init_clocks(16934000);
 	s3c24xx_init_uarts(rx3715_uartcfgs, ARRAY_SIZE(rx3715_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init rx3715_init_time(void)
+{
+	s3c2440_init_clocks(16934000);
+	samsung_timer_init();
+}
+
 /* H1940 and RX3715 need to reserve this for suspend */
 static void __init rx3715_reserve(void)
 {
@@ -210,6 +214,6 @@ MACHINE_START(RX3715, "IPAQ-RX3715")
 	.reserve	= rx3715_reserve,
 	.init_irq	= s3c2440_init_irq,
 	.init_machine	= rx3715_init_machine,
-	.init_time	= samsung_timer_init,
+	.init_time	= rx3715_init_time,
 	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-s3c2416-dt.c

@@ -18,7 +18,6 @@
 #include <linux/clocksource.h>
 #include <linux/irqchip.h>
 #include <linux/of_platform.h>
-#include <linux/serial_core.h>
 #include <linux/serial_s3c.h>
 
 #include <asm/mach/arch.h>
@@ -29,48 +28,14 @@
 
 #include "common.h"
 
-/*
- * The following lookup table is used to override device names when devices
- * are registered from device tree. This is temporarily added to enable
- * device tree support addition for the S3C2416 architecture.
- *
- * For drivers that require platform data to be provided from the machine
- * file, a platform data pointer can also be supplied along with the
- * devices names. Usually, the platform data elements that cannot be parsed
- * from the device tree by the drivers (example: function pointers) are
- * supplied. But it should be noted that this is a temporary mechanism and
- * at some point, the drivers should be capable of parsing all the platform
- * data from the device tree.
- */
-static const struct of_dev_auxdata s3c2416_auxdata_lookup[] __initconst = {
-	OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART,
-				"s3c2440-uart.0", NULL),
-	OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART + 0x4000,
-				"s3c2440-uart.1", NULL),
-	OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART + 0x8000,
-				"s3c2440-uart.2", NULL),
-	OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART + 0xC000,
-				"s3c2440-uart.3", NULL),
-	OF_DEV_AUXDATA("samsung,s3c6410-sdhci", S3C_PA_HSMMC0,
-				"s3c-sdhci.0", NULL),
-	OF_DEV_AUXDATA("samsung,s3c6410-sdhci", S3C_PA_HSMMC1,
-				"s3c-sdhci.1", NULL),
-	OF_DEV_AUXDATA("samsung,s3c2440-i2c", S3C_PA_IIC,
-				"s3c2440-i2c.0", NULL),
-	{},
-};
-
 static void __init s3c2416_dt_map_io(void)
 {
 	s3c24xx_init_io(NULL, 0);
-	s3c24xx_init_clocks(12000000);
 }
 
 static void __init s3c2416_dt_machine_init(void)
 {
-	of_platform_populate(NULL, of_default_bus_match_table,
-				s3c2416_auxdata_lookup, NULL);
-
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 	s3c_pm_init();
 }
 
@@ -86,6 +51,5 @@ DT_MACHINE_START(S3C2416_DT, "Samsung S3C2416 (Flattened Device Tree)")
 	.map_io		= s3c2416_dt_map_io,
 	.init_irq	= irqchip_init,
 	.init_machine	= s3c2416_dt_machine_init,
-	 .init_time	= clocksource_of_init,
 	.restart	= s3c2416_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-smdk2410.c

@@ -99,11 +99,16 @@ static struct platform_device *smdk2410_devices[] __initdata = {
 static void __init smdk2410_map_io(void)
 {
 	s3c24xx_init_io(smdk2410_iodesc, ARRAY_SIZE(smdk2410_iodesc));
-	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init smdk2410_init_time(void)
+{
+	s3c2410_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 static void __init smdk2410_init(void)
 {
 	s3c_i2c0_set_platdata(NULL);
@@ -118,6 +123,6 @@ MACHINE_START(SMDK2410, "SMDK2410") /* @TODO: request a new identifier and switc
 	.map_io		= smdk2410_map_io,
 	.init_irq	= s3c2410_init_irq,
 	.init_machine	= smdk2410_init,
-	.init_time	= samsung_timer_init,
+	.init_time	= smdk2410_init_time,
 	.restart	= s3c2410_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-smdk2413.c

@@ -106,11 +106,16 @@ static void __init smdk2413_fixup(struct tag *tags, char **cmdline,
 static void __init smdk2413_map_io(void)
 {
 	s3c24xx_init_io(smdk2413_iodesc, ARRAY_SIZE(smdk2413_iodesc));
-	s3c24xx_init_clocks(12000000);
 	s3c24xx_init_uarts(smdk2413_uartcfgs, ARRAY_SIZE(smdk2413_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init smdk2413_init_time(void)
+{
+	s3c2412_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 static void __init smdk2413_machine_init(void)
 {	/* Turn off suspend on both USB ports, and switch the
 	 * selectable USB port to USB device mode. */
@@ -159,6 +164,6 @@ MACHINE_START(SMDK2413, "SMDK2413")
 	.init_irq	= s3c2412_init_irq,
 	.map_io		= smdk2413_map_io,
 	.init_machine	= smdk2413_machine_init,
-	.init_time	= samsung_timer_init,
+	.init_time	= smdk2413_init_time,
 	.restart	= s3c2412_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-smdk2416.c

@@ -219,10 +219,15 @@ static struct platform_device *smdk2416_devices[] __initdata = {
 	&s3c2443_device_dma,
 };
 
+static void __init smdk2416_init_time(void)
+{
+	s3c2416_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 static void __init smdk2416_map_io(void)
 {
 	s3c24xx_init_io(smdk2416_iodesc, ARRAY_SIZE(smdk2416_iodesc));
-	s3c24xx_init_clocks(12000000);
 	s3c24xx_init_uarts(smdk2416_uartcfgs, ARRAY_SIZE(smdk2416_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
@@ -257,6 +262,6 @@ MACHINE_START(SMDK2416, "SMDK2416")
 	.init_irq	= s3c2416_init_irq,
 	.map_io		= smdk2416_map_io,
 	.init_machine	= smdk2416_machine_init,
-	.init_time	= samsung_timer_init,
+	.init_time	= smdk2416_init_time,
 	.restart	= s3c2416_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-smdk2440.c

@@ -38,7 +38,6 @@
 #include <mach/fb.h>
 #include <linux/platform_data/i2c-s3c2410.h>
 
-#include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/samsung-time.h>
@@ -159,11 +158,16 @@ static struct platform_device *smdk2440_devices[] __initdata = {
 static void __init smdk2440_map_io(void)
 {
 	s3c24xx_init_io(smdk2440_iodesc, ARRAY_SIZE(smdk2440_iodesc));
-	s3c24xx_init_clocks(16934400);
 	s3c24xx_init_uarts(smdk2440_uartcfgs, ARRAY_SIZE(smdk2440_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init smdk2440_init_time(void)
+{
+	s3c2440_init_clocks(16934400);
+	samsung_timer_init();
+}
+
 static void __init smdk2440_machine_init(void)
 {
 	s3c24xx_fb_set_platdata(&smdk2440_fb_info);
@@ -180,6 +184,6 @@ MACHINE_START(S3C2440, "SMDK2440")
 	.init_irq	= s3c2440_init_irq,
 	.map_io		= smdk2440_map_io,
 	.init_machine	= smdk2440_machine_init,
-	.init_time	= samsung_timer_init,
+	.init_time	= smdk2440_init_time,
 	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-smdk2443.c

@@ -121,11 +121,16 @@ static struct platform_device *smdk2443_devices[] __initdata = {
 static void __init smdk2443_map_io(void)
 {
 	s3c24xx_init_io(smdk2443_iodesc, ARRAY_SIZE(smdk2443_iodesc));
-	s3c24xx_init_clocks(12000000);
 	s3c24xx_init_uarts(smdk2443_uartcfgs, ARRAY_SIZE(smdk2443_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init smdk2443_init_time(void)
+{
+	s3c2443_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 static void __init smdk2443_machine_init(void)
 {
 	s3c_i2c0_set_platdata(NULL);
@@ -145,6 +150,6 @@ MACHINE_START(SMDK2443, "SMDK2443")
 	.init_irq	= s3c2443_init_irq,
 	.map_io		= smdk2443_map_io,
 	.init_machine	= smdk2443_machine_init,
-	.init_time	= samsung_timer_init,
+	.init_time	= smdk2443_init_time,
 	.restart	= s3c2443_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-tct_hammer.c

@@ -135,11 +135,16 @@ static struct platform_device *tct_hammer_devices[] __initdata = {
 static void __init tct_hammer_map_io(void)
 {
 	s3c24xx_init_io(tct_hammer_iodesc, ARRAY_SIZE(tct_hammer_iodesc));
-	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(tct_hammer_uartcfgs, ARRAY_SIZE(tct_hammer_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init tct_hammer_init_time(void)
+{
+	s3c2410_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 static void __init tct_hammer_init(void)
 {
 	s3c_i2c0_set_platdata(NULL);
@@ -151,6 +156,6 @@ MACHINE_START(TCT_HAMMER, "TCT_HAMMER")
 	.map_io		= tct_hammer_map_io,
 	.init_irq	= s3c2410_init_irq,
 	.init_machine	= tct_hammer_init,
-	.init_time	= samsung_timer_init,
+	.init_time	= tct_hammer_init_time,
 	.restart	= s3c2410_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-vr1000.c

@@ -43,7 +43,6 @@
 #include <mach/regs-gpio.h>
 #include <mach/gpio-samsung.h>
 
-#include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/samsung-time.h>
@@ -286,6 +285,7 @@ static struct i2c_board_info vr1000_i2c_devs[] __initdata = {
 /* devices for this board */
 
 static struct platform_device *vr1000_devices[] __initdata = {
+	&s3c2410_device_dclk,
 	&s3c_device_ohci,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
@@ -299,14 +299,6 @@ static struct platform_device *vr1000_devices[] __initdata = {
 	&vr1000_led3,
 };
 
-static struct clk *vr1000_clocks[] __initdata = {
-	&s3c24xx_dclk0,
-	&s3c24xx_dclk1,
-	&s3c24xx_clkout0,
-	&s3c24xx_clkout1,
-	&s3c24xx_uclk,
-};
-
 static void vr1000_power_off(void)
 {
 	gpio_direction_output(S3C2410_GPB(9), 1);
@@ -314,29 +306,19 @@ static void vr1000_power_off(void)
 
 static void __init vr1000_map_io(void)
 {
-	/* initialise clock sources */
-
-	s3c24xx_dclk0.parent = &clk_upll;
-	s3c24xx_dclk0.rate   = 12*1000*1000;
-
-	s3c24xx_dclk1.parent = NULL;
-	s3c24xx_dclk1.rate   = 3692307;
-
-	s3c24xx_clkout0.parent  = &s3c24xx_dclk0;
-	s3c24xx_clkout1.parent  = &s3c24xx_dclk1;
-
-	s3c24xx_uclk.parent  = &s3c24xx_clkout1;
-
-	s3c24xx_register_clocks(vr1000_clocks, ARRAY_SIZE(vr1000_clocks));
-
 	pm_power_off = vr1000_power_off;
 
 	s3c24xx_init_io(vr1000_iodesc, ARRAY_SIZE(vr1000_iodesc));
-	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(vr1000_uartcfgs, ARRAY_SIZE(vr1000_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init vr1000_init_time(void)
+{
+	s3c2410_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 static void __init vr1000_init(void)
 {
 	s3c_i2c0_set_platdata(NULL);
@@ -357,6 +339,6 @@ MACHINE_START(VR1000, "Thorcom-VR1000")
 	.map_io		= vr1000_map_io,
 	.init_machine	= vr1000_init,
 	.init_irq	= s3c2410_init_irq,
-	.init_time	= samsung_timer_init,
+	.init_time	= vr1000_init_time,
 	.restart	= s3c2410_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-vstms.c

@@ -142,11 +142,16 @@ static void __init vstms_fixup(struct tag *tags, char **cmdline,
 static void __init vstms_map_io(void)
 {
 	s3c24xx_init_io(vstms_iodesc, ARRAY_SIZE(vstms_iodesc));
-	s3c24xx_init_clocks(12000000);
 	s3c24xx_init_uarts(vstms_uartcfgs, ARRAY_SIZE(vstms_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init vstms_init_time(void)
+{
+	s3c2412_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 static void __init vstms_init(void)
 {
 	s3c_i2c0_set_platdata(NULL);
@@ -162,6 +167,6 @@ MACHINE_START(VSTMS, "VSTMS")
 	.init_irq	= s3c2412_init_irq,
 	.init_machine	= vstms_init,
 	.map_io		= vstms_map_io,
-	.init_time	= samsung_timer_init,
+	.init_time	= vstms_init_time,
 	.restart	= s3c2412_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/pm.c

@@ -51,9 +51,6 @@
 #define PFX "s3c24xx-pm: "
 
 static struct sleep_save core_save[] = {
-	SAVE_ITEM(S3C2410_LOCKTIME),
-	SAVE_ITEM(S3C2410_CLKCON),
-
 	/* we restore the timings here, with the proviso that the board
 	 * brings the system up in an slower, or equal frequency setting
 	 * to the original system.
@@ -69,18 +66,6 @@ static struct sleep_save core_save[] = {
 	SAVE_ITEM(S3C2410_BANKCON3),
 	SAVE_ITEM(S3C2410_BANKCON4),
 	SAVE_ITEM(S3C2410_BANKCON5),
-
-#ifndef CONFIG_CPU_FREQ
-	SAVE_ITEM(S3C2410_CLKDIVN),
-	SAVE_ITEM(S3C2410_MPLLCON),
-	SAVE_ITEM(S3C2410_REFRESH),
-#endif
-	SAVE_ITEM(S3C2410_UPLLCON),
-	SAVE_ITEM(S3C2410_CLKSLOW),
-};
-
-static struct sleep_save misc_save[] = {
-	SAVE_ITEM(S3C2410_DCLKCON),
 };
 
 /* s3c_pm_check_resume_pin
@@ -140,12 +125,10 @@ void s3c_pm_configure_extint(void)
 void s3c_pm_restore_core(void)
 {
 	s3c_pm_do_restore_core(core_save, ARRAY_SIZE(core_save));
-	s3c_pm_do_restore(misc_save, ARRAY_SIZE(misc_save));
 }
 
 void s3c_pm_save_core(void)
 {
-	s3c_pm_do_save(misc_save, ARRAY_SIZE(misc_save));
 	s3c_pm_do_save(core_save, ARRAY_SIZE(core_save));
 }
 

arch/arm/mach-s3c24xx/s3c2410.c

@@ -85,62 +85,6 @@ void __init s3c2410_map_io(void)
 
 void __init_or_cpufreq s3c2410_setup_clocks(void)
 {
-	struct clk *xtal_clk;
-	unsigned long tmp;
-	unsigned long xtal;
-	unsigned long fclk;
-	unsigned long hclk;
-	unsigned long pclk;
-
-	xtal_clk = clk_get(NULL, "xtal");
-	xtal = clk_get_rate(xtal_clk);
-	clk_put(xtal_clk);
-
-	/* now we've got our machine bits initialised, work out what
-	 * clocks we've got */
-
-	fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal);
-
-	tmp = __raw_readl(S3C2410_CLKDIVN);
-
-	/* work out clock scalings */
-
-	hclk = fclk / ((tmp & S3C2410_CLKDIVN_HDIVN) ? 2 : 1);
-	pclk = hclk / ((tmp & S3C2410_CLKDIVN_PDIVN) ? 2 : 1);
-
-	/* print brieft summary of clocks, etc */
-
-	printk("S3C2410: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n",
-	       print_mhz(fclk), print_mhz(hclk), print_mhz(pclk));
-
-	/* initialise the clocks here, to allow other things like the
-	 * console to use them
-	 */
-
-	s3c24xx_setup_clocks(fclk, hclk, pclk);
-}
-
-/* fake ARMCLK for use with cpufreq, etc. */
-
-static struct clk s3c2410_armclk = {
-	.name	= "armclk",
-	.parent	= &clk_f,
-	.id	= -1,
-};
-
-static struct clk_lookup s3c2410_clk_lookup[] = {
-	CLKDEV_INIT(NULL, "clk_uart_baud0", &clk_p),
-	CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk),
-};
-
-void __init s3c2410_init_clocks(int xtal)
-{
-	s3c24xx_register_baseclocks(xtal);
-	s3c2410_setup_clocks();
-	s3c2410_baseclk_add();
-	s3c24xx_register_clock(&s3c2410_armclk);
-	clkdev_add_table(s3c2410_clk_lookup, ARRAY_SIZE(s3c2410_clk_lookup));
-	samsung_wdt_reset_init(S3C24XX_VA_WATCHDOG);
 }
 
 struct bus_type s3c2410_subsys = {

arch/arm/mach-s3c24xx/s3c2412.c

@@ -173,49 +173,6 @@ void __init s3c2412_map_io(void)
 
 void __init_or_cpufreq s3c2412_setup_clocks(void)
 {
-	struct clk *xtal_clk;
-	unsigned long tmp;
-	unsigned long xtal;
-	unsigned long fclk;
-	unsigned long hclk;
-	unsigned long pclk;
-
-	xtal_clk = clk_get(NULL, "xtal");
-	xtal = clk_get_rate(xtal_clk);
-	clk_put(xtal_clk);
-
-	/* now we've got our machine bits initialised, work out what
-	 * clocks we've got */
-
-	fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal * 2);
-
-	clk_mpll.rate = fclk;
-
-	tmp = __raw_readl(S3C2410_CLKDIVN);
-
-	/* work out clock scalings */
-
-	hclk = fclk / ((tmp & S3C2412_CLKDIVN_HDIVN_MASK) + 1);
-	hclk /= ((tmp & S3C2412_CLKDIVN_ARMDIVN) ? 2 : 1);
-	pclk = hclk / ((tmp & S3C2412_CLKDIVN_PDIVN) ? 2 : 1);
-
-	/* print brieft summary of clocks, etc */
-
-	printk("S3C2412: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n",
-	       print_mhz(fclk), print_mhz(hclk), print_mhz(pclk));
-
-	s3c24xx_setup_clocks(fclk, hclk, pclk);
-}
-
-void __init s3c2412_init_clocks(int xtal)
-{
-	/* initialise the clocks here, to allow other things like the
-	 * console to use them
-	 */
-
-	s3c24xx_register_baseclocks(xtal);
-	s3c2412_setup_clocks();
-	s3c2412_baseclk_add();
 }
 
 /* need to register the subsystem before we actually register the device, and

arch/arm/mach-s3c24xx/s3c2442.c

@@ -53,117 +53,6 @@
 
 #include "common.h"
 
-/* S3C2442 extended clock support */
-
-static unsigned long s3c2442_camif_upll_round(struct clk *clk,
-					      unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	int div;
-
-	if (rate > parent_rate)
-		return parent_rate;
-
-	div = parent_rate / rate;
-
-	if (div == 3)
-		return parent_rate / 3;
-
-	/* note, we remove the +/- 1 calculations for the divisor */
-
-	div /= 2;
-
-	if (div < 1)
-		div = 1;
-	else if (div > 16)
-		div = 16;
-
-	return parent_rate / (div * 2);
-}
-
-static int s3c2442_camif_upll_setrate(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long camdivn =  __raw_readl(S3C2440_CAMDIVN);
-
-	rate = s3c2442_camif_upll_round(clk, rate);
-
-	camdivn &= ~S3C2442_CAMDIVN_CAMCLK_DIV3;
-
-	if (rate == parent_rate) {
-		camdivn &= ~S3C2440_CAMDIVN_CAMCLK_SEL;
-	} else if ((parent_rate / rate) == 3) {
-		camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL;
-		camdivn |= S3C2442_CAMDIVN_CAMCLK_DIV3;
-	} else {
-		camdivn &= ~S3C2440_CAMDIVN_CAMCLK_MASK;
-		camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL;
-		camdivn |= (((parent_rate / rate) / 2) - 1);
-	}
-
-	__raw_writel(camdivn, S3C2440_CAMDIVN);
-
-	return 0;
-}
-
-/* Extra S3C2442 clocks */
-
-static struct clk s3c2442_clk_cam = {
-	.name		= "camif",
-	.id		= -1,
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2440_CLKCON_CAMERA,
-};
-
-static struct clk s3c2442_clk_cam_upll = {
-	.name		= "camif-upll",
-	.id		= -1,
-	.ops		= &(struct clk_ops) {
-		.set_rate	= s3c2442_camif_upll_setrate,
-		.round_rate	= s3c2442_camif_upll_round,
-	},
-};
-
-static int s3c2442_clk_add(struct device *dev, struct subsys_interface *sif)
-{
-	struct clk *clock_upll;
-	struct clk *clock_h;
-	struct clk *clock_p;
-
-	clock_p = clk_get(NULL, "pclk");
-	clock_h = clk_get(NULL, "hclk");
-	clock_upll = clk_get(NULL, "upll");
-
-	if (IS_ERR(clock_p) || IS_ERR(clock_h) || IS_ERR(clock_upll)) {
-		printk(KERN_ERR "S3C2442: Failed to get parent clocks\n");
-		return -EINVAL;
-	}
-
-	s3c2442_clk_cam.parent = clock_h;
-	s3c2442_clk_cam_upll.parent = clock_upll;
-
-	s3c24xx_register_clock(&s3c2442_clk_cam);
-	s3c24xx_register_clock(&s3c2442_clk_cam_upll);
-
-	clk_disable(&s3c2442_clk_cam);
-
-	return 0;
-}
-
-static struct subsys_interface s3c2442_clk_interface = {
-	.name		= "s3c2442_clk",
-	.subsys		= &s3c2442_subsys,
-	.add_dev	= s3c2442_clk_add,
-};
-
-static __init int s3c2442_clk_init(void)
-{
-	return subsys_interface_register(&s3c2442_clk_interface);
-}
-
-arch_initcall(s3c2442_clk_init);
-
-
 static struct device s3c2442_dev = {
 	.bus		= &s3c2442_subsys,
 };

arch/arm/mach-s3c24xx/s3c244x.c

@@ -46,6 +46,7 @@
 #include <plat/nand-core.h>
 #include <plat/watchdog-reset.h>
 
+#include "common.h"
 #include "regs-dsc.h"
 
 static struct map_desc s3c244x_iodesc[] __initdata = {
@@ -74,67 +75,11 @@ void __init s3c244x_map_io(void)
 	s3c_nand_setname("s3c2440-nand");
 	s3c_device_ts.name = "s3c2440-ts";
 	s3c_device_usbgadget.name = "s3c2440-usbgadget";
+	s3c2410_device_dclk.name = "s3c2440-dclk";
 }
 
 void __init_or_cpufreq s3c244x_setup_clocks(void)
 {
-	struct clk *xtal_clk;
-	unsigned long clkdiv;
-	unsigned long camdiv;
-	unsigned long xtal;
-	unsigned long hclk, fclk, pclk;
-	int hdiv = 1;
-
-	xtal_clk = clk_get(NULL, "xtal");
-	xtal = clk_get_rate(xtal_clk);
-	clk_put(xtal_clk);
-
-	fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal) * 2;
-
-	clkdiv = __raw_readl(S3C2410_CLKDIVN);
-	camdiv = __raw_readl(S3C2440_CAMDIVN);
-
-	/* work out clock scalings */
-
-	switch (clkdiv & S3C2440_CLKDIVN_HDIVN_MASK) {
-	case S3C2440_CLKDIVN_HDIVN_1:
-		hdiv = 1;
-		break;
-
-	case S3C2440_CLKDIVN_HDIVN_2:
-		hdiv = 2;
-		break;
-
-	case S3C2440_CLKDIVN_HDIVN_4_8:
-		hdiv = (camdiv & S3C2440_CAMDIVN_HCLK4_HALF) ? 8 : 4;
-		break;
-
-	case S3C2440_CLKDIVN_HDIVN_3_6:
-		hdiv = (camdiv & S3C2440_CAMDIVN_HCLK3_HALF) ? 6 : 3;
-		break;
-	}
-
-	hclk = fclk / hdiv;
-	pclk = hclk / ((clkdiv & S3C2440_CLKDIVN_PDIVN) ? 2 : 1);
-
-	/* print brief summary of clocks, etc */
-
-	printk("S3C244X: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n",
-	       print_mhz(fclk), print_mhz(hclk), print_mhz(pclk));
-
-	s3c24xx_setup_clocks(fclk, hclk, pclk);
-}
-
-void __init s3c244x_init_clocks(int xtal)
-{
-	/* initialise the clocks here, to allow other things like the
-	 * console to use them, and to add new ones after the initialisation
-	 */
-
-	s3c24xx_register_baseclocks(xtal);
-	s3c244x_setup_clocks();
-	s3c2410_baseclk_add();
-	samsung_wdt_reset_init(S3C24XX_VA_WATCHDOG);
 }
 
 /* Since the S3C2442 and S3C2440 share items, put both subsystems here */

arch/arm/plat-samsung/include/plat/cpu-freq-core.h

@@ -119,6 +119,7 @@ struct s3c_plltab {
 struct s3c_cpufreq_config {
 	struct s3c_freq		freq;
 	struct s3c_freq		max;
+	struct clk		*mpll;
 	struct cpufreq_frequency_table pll;
 	struct s3c_clkdivs	divs;
 	struct s3c_cpufreq_info *info;	/* for core, not drivers */

drivers/clk/Kconfig

@@ -115,3 +115,5 @@ endmenu
 
 source "drivers/clk/bcm/Kconfig"
 source "drivers/clk/mvebu/Kconfig"
+
+source "drivers/clk/samsung/Kconfig"

drivers/clk/Makefile

@@ -41,7 +41,7 @@ obj-$(CONFIG_PLAT_ORION)		+= mvebu/
 obj-$(CONFIG_ARCH_MXS)			+= mxs/
 obj-$(CONFIG_COMMON_CLK_QCOM)		+= qcom/
 obj-$(CONFIG_ARCH_ROCKCHIP)		+= rockchip/
-obj-$(CONFIG_PLAT_SAMSUNG)		+= samsung/
+obj-$(CONFIG_COMMON_CLK_SAMSUNG)	+= samsung/
 obj-$(CONFIG_ARCH_SHMOBILE_MULTI)	+= shmobile/
 obj-$(CONFIG_ARCH_SIRF)			+= sirf/
 obj-$(CONFIG_ARCH_SOCFPGA)		+= socfpga/

drivers/clk/samsung/Kconfig

@@ -0,0 +1,26 @@
+config COMMON_CLK_SAMSUNG
+	bool
+	select COMMON_CLK
+
+config S3C2410_COMMON_CLK
+	bool
+	select COMMON_CLK_SAMSUNG
+	help
+	  Build the s3c2410 clock driver based on the common clock framework.
+
+config S3C2410_COMMON_DCLK
+	bool
+	select COMMON_CLK_SAMSUNG
+	select REGMAP_MMIO
+	help
+	  Temporary symbol to build the dclk driver based on the common clock
+	  framework.
+
+config S3C2412_COMMON_CLK
+	bool
+	select COMMON_CLK_SAMSUNG
+
+config S3C2443_COMMON_CLK
+	bool
+	select COMMON_CLK_SAMSUNG
+

drivers/clk/samsung/Makefile

@@ -3,9 +3,15 @@
 #
 
 obj-$(CONFIG_COMMON_CLK)	+= clk.o clk-pll.o
+obj-$(CONFIG_SOC_EXYNOS3250)	+= clk-exynos3250.o
 obj-$(CONFIG_ARCH_EXYNOS4)	+= clk-exynos4.o
 obj-$(CONFIG_SOC_EXYNOS5250)	+= clk-exynos5250.o
+obj-$(CONFIG_SOC_EXYNOS5260)	+= clk-exynos5260.o
 obj-$(CONFIG_SOC_EXYNOS5420)	+= clk-exynos5420.o
 obj-$(CONFIG_SOC_EXYNOS5440)	+= clk-exynos5440.o
 obj-$(CONFIG_ARCH_EXYNOS)	+= clk-exynos-audss.o
+obj-$(CONFIG_S3C2410_COMMON_CLK)+= clk-s3c2410.o
+obj-$(CONFIG_S3C2410_COMMON_DCLK)+= clk-s3c2410-dclk.o
+obj-$(CONFIG_S3C2412_COMMON_CLK)+= clk-s3c2412.o
+obj-$(CONFIG_S3C2443_COMMON_CLK)+= clk-s3c2443.o
 obj-$(CONFIG_ARCH_S3C64XX)	+= clk-s3c64xx.o

drivers/clk/samsung/clk-exynos3250.c

@@ -0,0 +1,780 @@
+/*
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Common Clock Framework support for Exynos3250 SoC.
+ */
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/syscore_ops.h>
+
+#include <dt-bindings/clock/exynos3250.h>
+
+#include "clk.h"
+#include "clk-pll.h"
+
+#define SRC_LEFTBUS		0x4200
+#define DIV_LEFTBUS		0x4500
+#define GATE_IP_LEFTBUS		0x4800
+#define SRC_RIGHTBUS		0x8200
+#define DIV_RIGHTBUS		0x8500
+#define GATE_IP_RIGHTBUS	0x8800
+#define GATE_IP_PERIR		0x8960
+#define MPLL_LOCK		0xc010
+#define MPLL_CON0		0xc110
+#define VPLL_LOCK		0xc020
+#define VPLL_CON0		0xc120
+#define UPLL_LOCK		0xc030
+#define UPLL_CON0		0xc130
+#define SRC_TOP0		0xc210
+#define SRC_TOP1		0xc214
+#define SRC_CAM			0xc220
+#define SRC_MFC			0xc228
+#define SRC_G3D			0xc22c
+#define SRC_LCD			0xc234
+#define SRC_ISP			0xc238
+#define SRC_FSYS		0xc240
+#define SRC_PERIL0		0xc250
+#define SRC_PERIL1		0xc254
+#define SRC_MASK_TOP		0xc310
+#define SRC_MASK_CAM		0xc320
+#define SRC_MASK_LCD		0xc334
+#define SRC_MASK_ISP		0xc338
+#define SRC_MASK_FSYS		0xc340
+#define SRC_MASK_PERIL0		0xc350
+#define SRC_MASK_PERIL1		0xc354
+#define DIV_TOP			0xc510
+#define DIV_CAM			0xc520
+#define DIV_MFC			0xc528
+#define DIV_G3D			0xc52c
+#define DIV_LCD			0xc534
+#define DIV_ISP			0xc538
+#define DIV_FSYS0		0xc540
+#define DIV_FSYS1		0xc544
+#define DIV_FSYS2		0xc548
+#define DIV_PERIL0		0xc550
+#define DIV_PERIL1		0xc554
+#define DIV_PERIL3		0xc55c
+#define DIV_PERIL4		0xc560
+#define DIV_PERIL5		0xc564
+#define DIV_CAM1		0xc568
+#define CLKDIV2_RATIO		0xc580
+#define GATE_SCLK_CAM		0xc820
+#define GATE_SCLK_MFC		0xc828
+#define GATE_SCLK_G3D		0xc82c
+#define GATE_SCLK_LCD		0xc834
+#define GATE_SCLK_ISP_TOP	0xc838
+#define GATE_SCLK_FSYS		0xc840
+#define GATE_SCLK_PERIL		0xc850
+#define GATE_IP_CAM		0xc920
+#define GATE_IP_MFC		0xc928
+#define GATE_IP_G3D		0xc92c
+#define GATE_IP_LCD		0xc934
+#define GATE_IP_ISP		0xc938
+#define GATE_IP_FSYS		0xc940
+#define GATE_IP_PERIL		0xc950
+#define GATE_BLOCK		0xc970
+#define APLL_LOCK		0x14000
+#define APLL_CON0		0x14100
+#define SRC_CPU			0x14200
+#define DIV_CPU0		0x14500
+#define DIV_CPU1		0x14504
+
+/* list of PLLs to be registered */
+enum exynos3250_plls {
+	apll, mpll, vpll, upll,
+	nr_plls
+};
+
+static void __iomem *reg_base;
+
+/*
+ * Support for CMU save/restore across system suspends
+ */
+#ifdef CONFIG_PM_SLEEP
+static struct samsung_clk_reg_dump *exynos3250_clk_regs;
+
+static unsigned long exynos3250_cmu_clk_regs[] __initdata = {
+	SRC_LEFTBUS,
+	DIV_LEFTBUS,
+	GATE_IP_LEFTBUS,
+	SRC_RIGHTBUS,
+	DIV_RIGHTBUS,
+	GATE_IP_RIGHTBUS,
+	GATE_IP_PERIR,
+	MPLL_LOCK,
+	MPLL_CON0,
+	VPLL_LOCK,
+	VPLL_CON0,
+	UPLL_LOCK,
+	UPLL_CON0,
+	SRC_TOP0,
+	SRC_TOP1,
+	SRC_CAM,
+	SRC_MFC,
+	SRC_G3D,
+	SRC_LCD,
+	SRC_ISP,
+	SRC_FSYS,
+	SRC_PERIL0,
+	SRC_PERIL1,
+	SRC_MASK_TOP,
+	SRC_MASK_CAM,
+	SRC_MASK_LCD,
+	SRC_MASK_ISP,
+	SRC_MASK_FSYS,
+	SRC_MASK_PERIL0,
+	SRC_MASK_PERIL1,
+	DIV_TOP,
+	DIV_CAM,
+	DIV_MFC,
+	DIV_G3D,
+	DIV_LCD,
+	DIV_ISP,
+	DIV_FSYS0,
+	DIV_FSYS1,
+	DIV_FSYS2,
+	DIV_PERIL0,
+	DIV_PERIL1,
+	DIV_PERIL3,
+	DIV_PERIL4,
+	DIV_PERIL5,
+	DIV_CAM1,
+	CLKDIV2_RATIO,
+	GATE_SCLK_CAM,
+	GATE_SCLK_MFC,
+	GATE_SCLK_G3D,
+	GATE_SCLK_LCD,
+	GATE_SCLK_ISP_TOP,
+	GATE_SCLK_FSYS,
+	GATE_SCLK_PERIL,
+	GATE_IP_CAM,
+	GATE_IP_MFC,
+	GATE_IP_G3D,
+	GATE_IP_LCD,
+	GATE_IP_ISP,
+	GATE_IP_FSYS,
+	GATE_IP_PERIL,
+	GATE_BLOCK,
+	APLL_LOCK,
+	SRC_CPU,
+	DIV_CPU0,
+	DIV_CPU1,
+};
+
+static int exynos3250_clk_suspend(void)
+{
+	samsung_clk_save(reg_base, exynos3250_clk_regs,
+				ARRAY_SIZE(exynos3250_cmu_clk_regs));
+	return 0;
+}
+
+static void exynos3250_clk_resume(void)
+{
+	samsung_clk_restore(reg_base, exynos3250_clk_regs,
+				ARRAY_SIZE(exynos3250_cmu_clk_regs));
+}
+
+static struct syscore_ops exynos3250_clk_syscore_ops = {
+	.suspend = exynos3250_clk_suspend,
+	.resume = exynos3250_clk_resume,
+};
+
+static void exynos3250_clk_sleep_init(void)
+{
+	exynos3250_clk_regs =
+		samsung_clk_alloc_reg_dump(exynos3250_cmu_clk_regs,
+					   ARRAY_SIZE(exynos3250_cmu_clk_regs));
+	if (!exynos3250_clk_regs) {
+		pr_warn("%s: Failed to allocate sleep save data\n", __func__);
+		goto err;
+	}
+
+	register_syscore_ops(&exynos3250_clk_syscore_ops);
+	return;
+err:
+	kfree(exynos3250_clk_regs);
+}
+#else
+static inline void exynos3250_clk_sleep_init(void) { }
+#endif
+
+/* list of all parent clock list */
+PNAME(mout_vpllsrc_p)		= { "fin_pll", };
+
+PNAME(mout_apll_p)		= { "fin_pll", "fout_apll", };
+PNAME(mout_mpll_p)		= { "fin_pll", "fout_mpll", };
+PNAME(mout_vpll_p)		= { "fin_pll", "fout_vpll", };
+PNAME(mout_upll_p)		= { "fin_pll", "fout_upll", };
+
+PNAME(mout_mpll_user_p)		= { "fin_pll", "div_mpll_pre", };
+PNAME(mout_epll_user_p)		= { "fin_pll", "mout_epll", };
+PNAME(mout_core_p)		= { "mout_apll", "mout_mpll_user_c", };
+PNAME(mout_hpm_p)		= { "mout_apll", "mout_mpll_user_c", };
+
+PNAME(mout_ebi_p)		= { "div_aclk_200", "div_aclk_160", };
+PNAME(mout_ebi_1_p)		= { "mout_ebi", "mout_vpll", };
+
+PNAME(mout_gdl_p)		= { "mout_mpll_user_l", };
+PNAME(mout_gdr_p)		= { "mout_mpll_user_r", };
+
+PNAME(mout_aclk_400_mcuisp_sub_p)
+				= { "fin_pll", "div_aclk_400_mcuisp", };
+PNAME(mout_aclk_266_0_p)	= { "div_mpll_pre", "mout_vpll", };
+PNAME(mout_aclk_266_1_p)	= { "mout_epll_user", };
+PNAME(mout_aclk_266_p)		= { "mout_aclk_266_0", "mout_aclk_266_1", };
+PNAME(mout_aclk_266_sub_p)	= { "fin_pll", "div_aclk_266", };
+
+PNAME(group_div_mpll_pre_p)	= { "div_mpll_pre", };
+PNAME(group_epll_vpll_p)	= { "mout_epll_user", "mout_vpll" };
+PNAME(group_sclk_p)		= { "xxti", "xusbxti",
+				    "none", "none",
+				    "none", "none", "div_mpll_pre",
+				    "mout_epll_user", "mout_vpll", };
+PNAME(group_sclk_audio_p)	= { "audiocdclk", "none",
+				    "none", "none",
+				    "xxti", "xusbxti",
+				    "div_mpll_pre", "mout_epll_user",
+				    "mout_vpll", };
+PNAME(group_sclk_cam_blk_p)	= { "xxti", "xusbxti",
+				    "none", "none", "none",
+				    "none", "div_mpll_pre",
+				    "mout_epll_user", "mout_vpll",
+				    "div_cam_blk_320", };
+PNAME(group_sclk_fimd0_p)	= { "xxti", "xusbxti",
+				    "m_bitclkhsdiv4_2l", "none",
+				    "none", "none", "div_mpll_pre",
+				    "mout_epll_user", "mout_vpll",
+				    "none", "none", "none",
+				    "div_lcd_blk_145", };
+
+PNAME(mout_mfc_p)		= { "mout_mfc_0", "mout_mfc_1" };
+PNAME(mout_g3d_p)		= { "mout_g3d_0", "mout_g3d_1" };
+
+static struct samsung_fixed_factor_clock fixed_factor_clks[] __initdata = {
+	FFACTOR(0, "sclk_mpll_1600", "mout_mpll", 1, 1, 0),
+	FFACTOR(0, "sclk_mpll_mif", "mout_mpll", 1, 2, 0),
+	FFACTOR(0, "sclk_bpll", "fout_bpll", 1, 2, 0),
+	FFACTOR(0, "div_cam_blk_320", "sclk_mpll_1600", 1, 5, 0),
+	FFACTOR(0, "div_lcd_blk_145", "sclk_mpll_1600", 1, 11, 0),
+
+	/* HACK: fin_pll hardcoded to xusbxti until detection is implemented. */
+	FFACTOR(CLK_FIN_PLL, "fin_pll", "xusbxti", 1, 1, 0),
+};
+
+static struct samsung_mux_clock mux_clks[] __initdata = {
+	/*
+	 * NOTE: Following table is sorted by register address in ascending
+	 * order and then bitfield shift in descending order, as it is done
+	 * in the User's Manual. When adding new entries, please make sure
+	 * that the order is preserved, to avoid merge conflicts and make
+	 * further work with defined data easier.
+	 */
+
+	/* SRC_LEFTBUS */
+	MUX(CLK_MOUT_MPLL_USER_L, "mout_mpll_user_l", mout_mpll_user_p,
+	    SRC_LEFTBUS, 4, 1),
+	MUX(CLK_MOUT_GDL, "mout_gdl", mout_gdl_p, SRC_LEFTBUS, 0, 1),
+
+	/* SRC_RIGHTBUS */
+	MUX(CLK_MOUT_MPLL_USER_R, "mout_mpll_user_r", mout_mpll_user_p,
+	    SRC_RIGHTBUS, 4, 1),
+	MUX(CLK_MOUT_GDR, "mout_gdr", mout_gdr_p, SRC_RIGHTBUS, 0, 1),
+
+	/* SRC_TOP0 */
+	MUX(CLK_MOUT_EBI, "mout_ebi", mout_ebi_p, SRC_TOP0, 28, 1),
+	MUX(CLK_MOUT_ACLK_200, "mout_aclk_200", group_div_mpll_pre_p,SRC_TOP0, 24, 1),
+	MUX(CLK_MOUT_ACLK_160, "mout_aclk_160", group_div_mpll_pre_p, SRC_TOP0, 20, 1),
+	MUX(CLK_MOUT_ACLK_100, "mout_aclk_100", group_div_mpll_pre_p, SRC_TOP0, 16, 1),
+	MUX(CLK_MOUT_ACLK_266_1, "mout_aclk_266_1", mout_aclk_266_1_p, SRC_TOP0, 14, 1),
+	MUX(CLK_MOUT_ACLK_266_0, "mout_aclk_266_0", mout_aclk_266_0_p, SRC_TOP0, 13, 1),
+	MUX(CLK_MOUT_ACLK_266, "mout_aclk_266", mout_aclk_266_p, SRC_TOP0, 12, 1),
+	MUX(CLK_MOUT_VPLL, "mout_vpll", mout_vpll_p, SRC_TOP0, 8, 1),
+	MUX(CLK_MOUT_EPLL_USER, "mout_epll_user", mout_epll_user_p, SRC_TOP0, 4, 1),
+	MUX(CLK_MOUT_EBI_1, "mout_ebi_1", mout_ebi_1_p, SRC_TOP0, 0, 1),
+
+	/* SRC_TOP1 */
+	MUX(CLK_MOUT_UPLL, "mout_upll", mout_upll_p, SRC_TOP1, 28, 1),
+	MUX(CLK_MOUT_ACLK_400_MCUISP_SUB, "mout_aclk_400_mcuisp_sub", mout_aclk_400_mcuisp_sub_p,
+		SRC_TOP1, 24, 1),
+	MUX(CLK_MOUT_ACLK_266_SUB, "mout_aclk_266_sub", mout_aclk_266_sub_p, SRC_TOP1, 20, 1),
+	MUX(CLK_MOUT_MPLL, "mout_mpll", mout_mpll_p, SRC_TOP1, 12, 1),
+	MUX(CLK_MOUT_ACLK_400_MCUISP, "mout_aclk_400_mcuisp", group_div_mpll_pre_p, SRC_TOP1, 8, 1),
+	MUX(CLK_MOUT_VPLLSRC, "mout_vpllsrc", mout_vpllsrc_p, SRC_TOP1, 0, 1),
+
+	/* SRC_CAM */
+	MUX(CLK_MOUT_CAM1, "mout_cam1", group_sclk_p, SRC_CAM, 20, 4),
+	MUX(CLK_MOUT_CAM_BLK, "mout_cam_blk", group_sclk_cam_blk_p, SRC_CAM, 0, 4),
+
+	/* SRC_MFC */
+	MUX(CLK_MOUT_MFC, "mout_mfc", mout_mfc_p, SRC_MFC, 8, 1),
+	MUX(CLK_MOUT_MFC_1, "mout_mfc_1", group_epll_vpll_p, SRC_MFC, 4, 1),
+	MUX(CLK_MOUT_MFC_0, "mout_mfc_0", group_div_mpll_pre_p, SRC_MFC, 0, 1),
+
+	/* SRC_G3D */
+	MUX(CLK_MOUT_G3D, "mout_g3d", mout_g3d_p, SRC_G3D, 8, 1),
+	MUX(CLK_MOUT_G3D_1, "mout_g3d_1", group_epll_vpll_p, SRC_G3D, 4, 1),
+	MUX(CLK_MOUT_G3D_0, "mout_g3d_0", group_div_mpll_pre_p, SRC_G3D, 0, 1),
+
+	/* SRC_LCD */
+	MUX(CLK_MOUT_MIPI0, "mout_mipi0", group_sclk_p, SRC_LCD, 12, 4),
+	MUX(CLK_MOUT_FIMD0, "mout_fimd0", group_sclk_fimd0_p, SRC_LCD, 0, 4),
+
+	/* SRC_ISP */
+	MUX(CLK_MOUT_UART_ISP, "mout_uart_isp", group_sclk_p, SRC_ISP, 12, 4),
+	MUX(CLK_MOUT_SPI1_ISP, "mout_spi1_isp", group_sclk_p, SRC_ISP, 8, 4),
+	MUX(CLK_MOUT_SPI0_ISP, "mout_spi0_isp", group_sclk_p, SRC_ISP, 4, 4),
+
+	/* SRC_FSYS */
+	MUX(CLK_MOUT_TSADC, "mout_tsadc", group_sclk_p, SRC_FSYS, 28, 4),
+	MUX(CLK_MOUT_MMC1, "mout_mmc1", group_sclk_p, SRC_FSYS, 4, 3),
+	MUX(CLK_MOUT_MMC0, "mout_mmc0", group_sclk_p, SRC_FSYS, 0, 3),
+
+	/* SRC_PERIL0 */
+	MUX(CLK_MOUT_UART1, "mout_uart1", group_sclk_p, SRC_PERIL0, 4, 4),
+	MUX(CLK_MOUT_UART0, "mout_uart0", group_sclk_p, SRC_PERIL0, 0, 4),
+
+	/* SRC_PERIL1 */
+	MUX(CLK_MOUT_SPI1, "mout_spi1", group_sclk_p, SRC_PERIL1, 20, 4),
+	MUX(CLK_MOUT_SPI0, "mout_spi0", group_sclk_p, SRC_PERIL1, 16, 4),
+	MUX(CLK_MOUT_AUDIO, "mout_audio", group_sclk_audio_p, SRC_PERIL1, 4, 4),
+
+	/* SRC_CPU */
+	MUX(CLK_MOUT_MPLL_USER_C, "mout_mpll_user_c", mout_mpll_user_p,
+	    SRC_CPU, 24, 1),
+	MUX(CLK_MOUT_HPM, "mout_hpm", mout_hpm_p, SRC_CPU, 20, 1),
+	MUX(CLK_MOUT_CORE, "mout_core", mout_core_p, SRC_CPU, 16, 1),
+	MUX(CLK_MOUT_APLL, "mout_apll", mout_apll_p, SRC_CPU, 0, 1),
+};
+
+static struct samsung_div_clock div_clks[] __initdata = {
+	/*
+	 * NOTE: Following table is sorted by register address in ascending
+	 * order and then bitfield shift in descending order, as it is done
+	 * in the User's Manual. When adding new entries, please make sure
+	 * that the order is preserved, to avoid merge conflicts and make
+	 * further work with defined data easier.
+	 */
+
+	/* DIV_LEFTBUS */
+	DIV(CLK_DIV_GPL, "div_gpl", "div_gdl", DIV_LEFTBUS, 4, 3),
+	DIV(CLK_DIV_GDL, "div_gdl", "mout_gdl", DIV_LEFTBUS, 0, 4),
+
+	/* DIV_RIGHTBUS */
+	DIV(CLK_DIV_GPR, "div_gpr", "div_gdr", DIV_RIGHTBUS, 4, 3),
+	DIV(CLK_DIV_GDR, "div_gdr", "mout_gdr", DIV_RIGHTBUS, 0, 4),
+
+	/* DIV_TOP */
+	DIV(CLK_DIV_MPLL_PRE, "div_mpll_pre", "sclk_mpll_mif", DIV_TOP, 28, 2),
+	DIV(CLK_DIV_ACLK_400_MCUISP, "div_aclk_400_mcuisp",
+	    "mout_aclk_400_mcuisp", DIV_TOP, 24, 3),
+	DIV(CLK_DIV_EBI, "div_ebi", "mout_ebi_1", DIV_TOP, 16, 3),
+	DIV(CLK_DIV_ACLK_200, "div_aclk_200", "mout_aclk_200", DIV_TOP, 12, 3),
+	DIV(CLK_DIV_ACLK_160, "div_aclk_160", "mout_aclk_160", DIV_TOP, 8, 3),
+	DIV(CLK_DIV_ACLK_100, "div_aclk_100", "mout_aclk_100", DIV_TOP, 4, 4),
+	DIV(CLK_DIV_ACLK_266, "div_aclk_266", "mout_aclk_266", DIV_TOP, 0, 3),
+
+	/* DIV_CAM */
+	DIV(CLK_DIV_CAM1, "div_cam1", "mout_cam1", DIV_CAM, 20, 4),
+	DIV(CLK_DIV_CAM_BLK, "div_cam_blk", "mout_cam_blk", DIV_CAM, 0, 4),
+
+	/* DIV_MFC */
+	DIV(CLK_DIV_MFC, "div_mfc", "mout_mfc", DIV_MFC, 0, 4),
+
+	/* DIV_G3D */
+	DIV(CLK_DIV_G3D, "div_g3d", "mout_g3d", DIV_G3D, 0, 4),
+
+	/* DIV_LCD */
+	DIV_F(CLK_DIV_MIPI0_PRE, "div_mipi0_pre", "div_mipi0", DIV_LCD, 20, 4,
+		CLK_SET_RATE_PARENT, 0),
+	DIV(CLK_DIV_MIPI0, "div_mipi0", "mout_mipi0", DIV_LCD, 16, 4),
+	DIV(CLK_DIV_FIMD0, "div_fimd0", "mout_fimd0", DIV_LCD, 0, 4),
+
+	/* DIV_ISP */
+	DIV(CLK_DIV_UART_ISP, "div_uart_isp", "mout_uart_isp", DIV_ISP, 28, 4),
+	DIV_F(CLK_DIV_SPI1_ISP_PRE, "div_spi1_isp_pre", "div_spi1_isp",
+		DIV_ISP, 20, 8, CLK_SET_RATE_PARENT, 0),
+	DIV(CLK_DIV_SPI1_ISP, "div_spi1_isp", "mout_spi1_isp", DIV_ISP, 16, 4),
+	DIV_F(CLK_DIV_SPI0_ISP_PRE, "div_spi0_isp_pre", "div_spi0_isp",
+		DIV_ISP, 8, 8, CLK_SET_RATE_PARENT, 0),
+	DIV(CLK_DIV_SPI0_ISP, "div_spi0_isp", "mout_spi0_isp", DIV_ISP, 0, 4),
+
+	/* DIV_FSYS0 */
+	DIV_F(CLK_DIV_TSADC_PRE, "div_tsadc_pre", "div_tsadc", DIV_FSYS0, 8, 8,
+		CLK_SET_RATE_PARENT, 0),
+	DIV(CLK_DIV_TSADC, "div_tsadc", "mout_tsadc", DIV_FSYS0, 0, 4),
+
+	/* DIV_FSYS1 */
+	DIV_F(CLK_DIV_MMC1_PRE, "div_mmc1_pre", "div_mmc1", DIV_FSYS1, 24, 8,
+		CLK_SET_RATE_PARENT, 0),
+	DIV(CLK_DIV_MMC1, "div_mmc1", "mout_mmc1", DIV_FSYS1, 16, 4),
+	DIV_F(CLK_DIV_MMC0_PRE, "div_mmc0_pre", "div_mmc0", DIV_FSYS1, 8, 8,
+		CLK_SET_RATE_PARENT, 0),
+	DIV(CLK_DIV_MMC0, "div_mmc0", "mout_mmc0", DIV_FSYS1, 0, 4),
+
+	/* DIV_PERIL0 */
+	DIV(CLK_DIV_UART1, "div_uart1", "mout_uart1", DIV_PERIL0, 4, 4),
+	DIV(CLK_DIV_UART0, "div_uart0", "mout_uart0", DIV_PERIL0, 0, 4),
+
+	/* DIV_PERIL1 */
+	DIV_F(CLK_DIV_SPI1_PRE, "div_spi1_pre", "div_spi1", DIV_PERIL1, 24, 8,
+		CLK_SET_RATE_PARENT, 0),
+	DIV(CLK_DIV_SPI1, "div_spi1", "mout_spi1", DIV_PERIL1, 16, 4),
+	DIV_F(CLK_DIV_SPI0_PRE, "div_spi0_pre", "div_spi0", DIV_PERIL1, 8, 8,
+		CLK_SET_RATE_PARENT, 0),
+	DIV(CLK_DIV_SPI0, "div_spi0", "mout_spi0", DIV_PERIL1, 0, 4),
+
+	/* DIV_PERIL4 */
+	DIV(CLK_DIV_PCM, "div_pcm", "div_audio", DIV_PERIL4, 20, 8),
+	DIV(CLK_DIV_AUDIO, "div_audio", "mout_audio", DIV_PERIL4, 16, 4),
+
+	/* DIV_PERIL5 */
+	DIV(CLK_DIV_I2S, "div_i2s", "div_audio", DIV_PERIL5, 8, 6),
+
+	/* DIV_CPU0 */
+	DIV(CLK_DIV_CORE2, "div_core2", "div_core", DIV_CPU0, 28, 3),
+	DIV(CLK_DIV_APLL, "div_apll", "mout_apll", DIV_CPU0, 24, 3),
+	DIV(CLK_DIV_PCLK_DBG, "div_pclk_dbg", "div_core2", DIV_CPU0, 20, 3),
+	DIV(CLK_DIV_ATB, "div_atb", "div_core2", DIV_CPU0, 16, 3),
+	DIV(CLK_DIV_COREM, "div_corem", "div_core2", DIV_CPU0, 4, 3),
+	DIV(CLK_DIV_CORE, "div_core", "mout_core", DIV_CPU0, 0, 3),
+
+	/* DIV_CPU1 */
+	DIV(CLK_DIV_HPM, "div_hpm", "div_copy", DIV_CPU1, 4, 3),
+	DIV(CLK_DIV_COPY, "div_copy", "mout_hpm", DIV_CPU1, 0, 3),
+};
+
+static struct samsung_gate_clock gate_clks[] __initdata = {
+	/*
+	 * NOTE: Following table is sorted by register address in ascending
+	 * order and then bitfield shift in descending order, as it is done
+	 * in the User's Manual. When adding new entries, please make sure
+	 * that the order is preserved, to avoid merge conflicts and make
+	 * further work with defined data easier.
+	 */
+
+	/* GATE_IP_LEFTBUS */
+	GATE(CLK_ASYNC_G3D, "async_g3d", "div_aclk_100", GATE_IP_LEFTBUS, 6,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_ASYNC_MFCL, "async_mfcl", "div_aclk_100", GATE_IP_LEFTBUS, 4,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_PPMULEFT, "ppmuleft", "div_aclk_100", GATE_IP_LEFTBUS, 1,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_GPIO_LEFT, "gpio_left", "div_aclk_100", GATE_IP_LEFTBUS, 0,
+		CLK_IGNORE_UNUSED, 0),
+
+	/* GATE_IP_RIGHTBUS */
+	GATE(CLK_ASYNC_ISPMX, "async_ispmx", "div_aclk_100",
+		GATE_IP_RIGHTBUS, 9, CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_ASYNC_FSYSD, "async_fsysd", "div_aclk_100",
+		GATE_IP_RIGHTBUS, 5, CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_ASYNC_LCD0X, "async_lcd0x", "div_aclk_100",
+		GATE_IP_RIGHTBUS, 3, CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_ASYNC_CAMX, "async_camx", "div_aclk_100", GATE_IP_RIGHTBUS, 2,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_PPMURIGHT, "ppmuright", "div_aclk_100", GATE_IP_RIGHTBUS, 1,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_GPIO_RIGHT, "gpio_right", "div_aclk_100", GATE_IP_RIGHTBUS, 0,
+		CLK_IGNORE_UNUSED, 0),
+
+	/* GATE_IP_PERIR */
+	GATE(CLK_MONOCNT, "monocnt", "div_aclk_100", GATE_IP_PERIR, 22,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_TZPC6, "tzpc6", "div_aclk_100", GATE_IP_PERIR, 21,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_PROVISIONKEY1, "provisionkey1", "div_aclk_100",
+		GATE_IP_PERIR, 20, CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_PROVISIONKEY0, "provisionkey0", "div_aclk_100",
+		GATE_IP_PERIR, 19, CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_CMU_ISPPART, "cmu_isppart", "div_aclk_100", GATE_IP_PERIR, 18,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_TMU_APBIF, "tmu_apbif", "div_aclk_100",
+		GATE_IP_PERIR, 17, 0, 0),
+	GATE(CLK_KEYIF, "keyif", "div_aclk_100", GATE_IP_PERIR, 16, 0, 0),
+	GATE(CLK_RTC, "rtc", "div_aclk_100", GATE_IP_PERIR, 15, 0, 0),
+	GATE(CLK_WDT, "wdt", "div_aclk_100", GATE_IP_PERIR, 14, 0, 0),
+	GATE(CLK_MCT, "mct", "div_aclk_100", GATE_IP_PERIR, 13, 0, 0),
+	GATE(CLK_SECKEY, "seckey", "div_aclk_100", GATE_IP_PERIR, 12,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_TZPC5, "tzpc5", "div_aclk_100", GATE_IP_PERIR, 10,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_TZPC4, "tzpc4", "div_aclk_100", GATE_IP_PERIR, 9,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_TZPC3, "tzpc3", "div_aclk_100", GATE_IP_PERIR, 8,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_TZPC2, "tzpc2", "div_aclk_100", GATE_IP_PERIR, 7,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_TZPC1, "tzpc1", "div_aclk_100", GATE_IP_PERIR, 6,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_TZPC0, "tzpc0", "div_aclk_100", GATE_IP_PERIR, 5,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_CMU_COREPART, "cmu_corepart", "div_aclk_100", GATE_IP_PERIR, 4,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_CMU_TOPPART, "cmu_toppart", "div_aclk_100", GATE_IP_PERIR, 3,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_PMU_APBIF, "pmu_apbif", "div_aclk_100", GATE_IP_PERIR, 2,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_SYSREG, "sysreg", "div_aclk_100", GATE_IP_PERIR, 1,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_CHIP_ID, "chip_id", "div_aclk_100", GATE_IP_PERIR, 0,
+		CLK_IGNORE_UNUSED, 0),
+
+	/* GATE_SCLK_CAM */
+	GATE(CLK_SCLK_JPEG, "sclk_jpeg", "div_cam_blk",
+		GATE_SCLK_CAM, 8, CLK_SET_RATE_PARENT, 0),
+	GATE(CLK_SCLK_M2MSCALER, "sclk_m2mscaler", "div_cam_blk",
+		GATE_SCLK_CAM, 2, CLK_SET_RATE_PARENT, 0),
+	GATE(CLK_SCLK_GSCALER1, "sclk_gscaler1", "div_cam_blk",
+		GATE_SCLK_CAM, 1, CLK_SET_RATE_PARENT, 0),
+	GATE(CLK_SCLK_GSCALER0, "sclk_gscaler0", "div_cam_blk",
+		GATE_SCLK_CAM, 0, CLK_SET_RATE_PARENT, 0),
+
+	/* GATE_SCLK_MFC */
+	GATE(CLK_SCLK_MFC, "sclk_mfc", "div_mfc",
+		GATE_SCLK_MFC, 0, CLK_SET_RATE_PARENT, 0),
+
+	/* GATE_SCLK_G3D */
+	GATE(CLK_SCLK_G3D, "sclk_g3d", "div_g3d",
+		GATE_SCLK_G3D, 0, CLK_SET_RATE_PARENT, 0),
+
+	/* GATE_SCLK_LCD */
+	GATE(CLK_SCLK_MIPIDPHY2L, "sclk_mipidphy2l", "div_mipi0",
+		GATE_SCLK_LCD, 4, CLK_SET_RATE_PARENT, 0),
+	GATE(CLK_SCLK_MIPI0, "sclk_mipi0", "div_mipi0_pre",
+		GATE_SCLK_LCD, 3, CLK_SET_RATE_PARENT, 0),
+	GATE(CLK_SCLK_FIMD0, "sclk_fimd0", "div_fimd0",
+		GATE_SCLK_LCD, 0, CLK_SET_RATE_PARENT, 0),
+
+	/* GATE_SCLK_ISP_TOP */
+	GATE(CLK_SCLK_CAM1, "sclk_cam1", "div_cam1",
+		GATE_SCLK_ISP_TOP, 4, CLK_SET_RATE_PARENT, 0),
+	GATE(CLK_SCLK_UART_ISP, "sclk_uart_isp", "div_uart_isp",
+		GATE_SCLK_ISP_TOP, 3, CLK_SET_RATE_PARENT, 0),
+	GATE(CLK_SCLK_SPI1_ISP, "sclk_spi1_isp", "div_spi1_isp",
+		GATE_SCLK_ISP_TOP, 2, CLK_SET_RATE_PARENT, 0),
+	GATE(CLK_SCLK_SPI0_ISP, "sclk_spi0_isp", "div_spi0_isp",
+		GATE_SCLK_ISP_TOP, 1, CLK_SET_RATE_PARENT, 0),
+
+	/* GATE_SCLK_FSYS */
+	GATE(CLK_SCLK_UPLL, "sclk_upll", "mout_upll", GATE_SCLK_FSYS, 10, 0, 0),
+	GATE(CLK_SCLK_TSADC, "sclk_tsadc", "div_tsadc_pre",
+		GATE_SCLK_FSYS, 9, CLK_SET_RATE_PARENT, 0),
+	GATE(CLK_SCLK_EBI, "sclk_ebi", "div_ebi",
+		GATE_SCLK_FSYS, 6, CLK_SET_RATE_PARENT, 0),
+	GATE(CLK_SCLK_MMC1, "sclk_mmc1", "div_mmc1_pre",
+		GATE_SCLK_FSYS, 1, CLK_SET_RATE_PARENT, 0),
+	GATE(CLK_SCLK_MMC0, "sclk_mmc0", "div_mmc0_pre",
+		GATE_SCLK_FSYS, 0, CLK_SET_RATE_PARENT, 0),
+
+	/* GATE_SCLK_PERIL */
+	GATE(CLK_SCLK_I2S, "sclk_i2s", "div_i2s",
+		GATE_SCLK_PERIL, 18, CLK_SET_RATE_PARENT, 0),
+	GATE(CLK_SCLK_PCM, "sclk_pcm", "div_pcm",
+		GATE_SCLK_PERIL, 16, CLK_SET_RATE_PARENT, 0),
+	GATE(CLK_SCLK_SPI1, "sclk_spi1", "div_spi1_pre",
+		GATE_SCLK_PERIL, 7, CLK_SET_RATE_PARENT, 0),
+	GATE(CLK_SCLK_SPI0, "sclk_spi0", "div_spi0_pre",
+		GATE_SCLK_PERIL, 6, CLK_SET_RATE_PARENT, 0),
+	GATE(CLK_SCLK_UART1, "sclk_uart1", "div_uart1",
+		GATE_SCLK_PERIL, 1, CLK_SET_RATE_PARENT, 0),
+	GATE(CLK_SCLK_UART0, "sclk_uart0", "div_uart0",
+		GATE_SCLK_PERIL, 0, CLK_SET_RATE_PARENT, 0),
+
+	/* GATE_IP_CAM */
+	GATE(CLK_QEJPEG, "qejpeg", "div_cam_blk_320", GATE_IP_CAM, 19,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_PIXELASYNCM1, "pixelasyncm1", "div_cam_blk_320",
+		GATE_IP_CAM, 18, CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_PIXELASYNCM0, "pixelasyncm0", "div_cam_blk_320",
+		GATE_IP_CAM, 17, CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_PPMUCAMIF, "ppmucamif", "div_cam_blk_320",
+		GATE_IP_CAM, 16, CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_QEM2MSCALER, "qem2mscaler", "div_cam_blk_320",
+		GATE_IP_CAM, 14, CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_QEGSCALER1, "qegscaler1", "div_cam_blk_320",
+		GATE_IP_CAM, 13, CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_QEGSCALER0, "qegscaler0", "div_cam_blk_320",
+		GATE_IP_CAM, 12, CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_SMMUJPEG, "smmujpeg", "div_cam_blk_320",
+		GATE_IP_CAM, 11, 0, 0),
+	GATE(CLK_SMMUM2M2SCALER, "smmum2m2scaler", "div_cam_blk_320",
+		GATE_IP_CAM, 9, 0, 0),
+	GATE(CLK_SMMUGSCALER1, "smmugscaler1", "div_cam_blk_320",
+		GATE_IP_CAM, 8, 0, 0),
+	GATE(CLK_SMMUGSCALER0, "smmugscaler0", "div_cam_blk_320",
+		GATE_IP_CAM, 7, 0, 0),
+	GATE(CLK_JPEG, "jpeg", "div_cam_blk_320", GATE_IP_CAM, 6, 0, 0),
+	GATE(CLK_M2MSCALER, "m2mscaler", "div_cam_blk_320",
+		GATE_IP_CAM, 2, 0, 0),
+	GATE(CLK_GSCALER1, "gscaler1", "div_cam_blk_320", GATE_IP_CAM, 1, 0, 0),
+	GATE(CLK_GSCALER0, "gscaler0", "div_cam_blk_320", GATE_IP_CAM, 0, 0, 0),
+
+	/* GATE_IP_MFC */
+	GATE(CLK_QEMFC, "qemfc", "div_aclk_200", GATE_IP_MFC, 5,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_PPMUMFC_L, "ppmumfc_l", "div_aclk_200", GATE_IP_MFC, 3,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_SMMUMFC_L, "smmumfc_l", "div_aclk_200", GATE_IP_MFC, 1, 0, 0),
+	GATE(CLK_MFC, "mfc", "div_aclk_200", GATE_IP_MFC, 0, 0, 0),
+
+	/* GATE_IP_G3D */
+	GATE(CLK_SMMUG3D, "smmug3d", "div_aclk_200", GATE_IP_G3D, 3, 0, 0),
+	GATE(CLK_QEG3D, "qeg3d", "div_aclk_200", GATE_IP_G3D, 2,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_PPMUG3D, "ppmug3d", "div_aclk_200", GATE_IP_G3D, 1,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_G3D, "g3d", "div_aclk_200", GATE_IP_G3D, 0, 0, 0),
+
+	/* GATE_IP_LCD */
+	GATE(CLK_QE_CH1_LCD, "qe_ch1_lcd", "div_aclk_160", GATE_IP_LCD, 7,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_QE_CH0_LCD, "qe_ch0_lcd", "div_aclk_160", GATE_IP_LCD, 6,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_PPMULCD0, "ppmulcd0", "div_aclk_160", GATE_IP_LCD, 5,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_SMMUFIMD0, "smmufimd0", "div_aclk_160", GATE_IP_LCD, 4, 0, 0),
+	GATE(CLK_DSIM0, "dsim0", "div_aclk_160", GATE_IP_LCD, 3, 0, 0),
+	GATE(CLK_SMIES, "smies", "div_aclk_160", GATE_IP_LCD, 2, 0, 0),
+	GATE(CLK_FIMD0, "fimd0", "div_aclk_160", GATE_IP_LCD, 0, 0, 0),
+
+	/* GATE_IP_ISP */
+	GATE(CLK_CAM1, "cam1", "mout_aclk_266_sub", GATE_IP_ISP, 5, 0, 0),
+	GATE(CLK_UART_ISP_TOP, "uart_isp_top", "mout_aclk_266_sub",
+		GATE_IP_ISP, 3, 0, 0),
+	GATE(CLK_SPI1_ISP_TOP, "spi1_isp_top", "mout_aclk_266_sub",
+		GATE_IP_ISP, 2, 0, 0),
+	GATE(CLK_SPI0_ISP_TOP, "spi0_isp_top", "mout_aclk_266_sub",
+		GATE_IP_ISP, 1, 0, 0),
+
+	/* GATE_IP_FSYS */
+	GATE(CLK_TSADC, "tsadc", "div_aclk_200", GATE_IP_FSYS, 20, 0, 0),
+	GATE(CLK_PPMUFILE, "ppmufile", "div_aclk_200", GATE_IP_FSYS, 17,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_USBOTG, "usbotg", "div_aclk_200", GATE_IP_FSYS, 13, 0, 0),
+	GATE(CLK_USBHOST, "usbhost", "div_aclk_200", GATE_IP_FSYS, 12, 0, 0),
+	GATE(CLK_SROMC, "sromc", "div_aclk_200", GATE_IP_FSYS, 11, 0, 0),
+	GATE(CLK_SDMMC1, "sdmmc1", "div_aclk_200", GATE_IP_FSYS, 6, 0, 0),
+	GATE(CLK_SDMMC0, "sdmmc0", "div_aclk_200", GATE_IP_FSYS, 5, 0, 0),
+	GATE(CLK_PDMA1, "pdma1", "div_aclk_200", GATE_IP_FSYS, 1, 0, 0),
+	GATE(CLK_PDMA0, "pdma0", "div_aclk_200", GATE_IP_FSYS, 0, 0, 0),
+
+	/* GATE_IP_PERIL */
+	GATE(CLK_PWM, "pwm", "div_aclk_100", GATE_IP_PERIL, 24, 0, 0),
+	GATE(CLK_PCM, "pcm", "div_aclk_100", GATE_IP_PERIL, 23, 0, 0),
+	GATE(CLK_I2S, "i2s", "div_aclk_100", GATE_IP_PERIL, 21, 0, 0),
+	GATE(CLK_SPI1, "spi1", "div_aclk_100", GATE_IP_PERIL, 17, 0, 0),
+	GATE(CLK_SPI0, "spi0", "div_aclk_100", GATE_IP_PERIL, 16, 0, 0),
+	GATE(CLK_I2C7, "i2c7", "div_aclk_100", GATE_IP_PERIL, 13, 0, 0),
+	GATE(CLK_I2C6, "i2c6", "div_aclk_100", GATE_IP_PERIL, 12, 0, 0),
+	GATE(CLK_I2C5, "i2c5", "div_aclk_100", GATE_IP_PERIL, 11, 0, 0),
+	GATE(CLK_I2C4, "i2c4", "div_aclk_100", GATE_IP_PERIL, 10, 0, 0),
+	GATE(CLK_I2C3, "i2c3", "div_aclk_100", GATE_IP_PERIL, 9, 0, 0),
+	GATE(CLK_I2C2, "i2c2", "div_aclk_100", GATE_IP_PERIL, 8, 0, 0),
+	GATE(CLK_I2C1, "i2c1", "div_aclk_100", GATE_IP_PERIL, 7, 0, 0),
+	GATE(CLK_I2C0, "i2c0", "div_aclk_100", GATE_IP_PERIL, 6, 0, 0),
+	GATE(CLK_UART1, "uart1", "div_aclk_100", GATE_IP_PERIL, 1, 0, 0),
+	GATE(CLK_UART0, "uart0", "div_aclk_100", GATE_IP_PERIL, 0, 0, 0),
+};
+
+/* APLL & MPLL & BPLL & UPLL */
+static struct samsung_pll_rate_table exynos3250_pll_rates[] = {
+	PLL_35XX_RATE(1200000000, 400, 4, 1),
+	PLL_35XX_RATE(1100000000, 275, 3, 1),
+	PLL_35XX_RATE(1066000000, 533, 6, 1),
+	PLL_35XX_RATE(1000000000, 250, 3, 1),
+	PLL_35XX_RATE( 960000000, 320, 4, 1),
+	PLL_35XX_RATE( 900000000, 300, 4, 1),
+	PLL_35XX_RATE( 850000000, 425, 6, 1),
+	PLL_35XX_RATE( 800000000, 200, 3, 1),
+	PLL_35XX_RATE( 700000000, 175, 3, 1),
+	PLL_35XX_RATE( 667000000, 667, 12, 1),
+	PLL_35XX_RATE( 600000000, 400, 4, 2),
+	PLL_35XX_RATE( 533000000, 533, 6, 2),
+	PLL_35XX_RATE( 520000000, 260, 3, 2),
+	PLL_35XX_RATE( 500000000, 250, 3, 2),
+	PLL_35XX_RATE( 400000000, 200, 3, 2),
+	PLL_35XX_RATE( 200000000, 200, 3, 3),
+	PLL_35XX_RATE( 100000000, 200, 3, 4),
+	{ /* sentinel */ }
+};
+
+/* VPLL */
+static struct samsung_pll_rate_table exynos3250_vpll_rates[] = {
+	PLL_36XX_RATE(600000000, 100, 2, 1,     0),
+	PLL_36XX_RATE(533000000, 266, 3, 2, 32768),
+	PLL_36XX_RATE(519230987, 173, 2, 2,  5046),
+	PLL_36XX_RATE(500000000, 250, 3, 2,     0),
+	PLL_36XX_RATE(445500000, 148, 2, 2, 32768),
+	PLL_36XX_RATE(445055007, 148, 2, 2, 23047),
+	PLL_36XX_RATE(400000000, 200, 3, 2,     0),
+	PLL_36XX_RATE(371250000, 123, 2, 2, 49152),
+	PLL_36XX_RATE(370878997, 185, 3, 2, 28803),
+	PLL_36XX_RATE(340000000, 170, 3, 2,     0),
+	PLL_36XX_RATE(335000015, 111, 2, 2, 43691),
+	PLL_36XX_RATE(333000000, 111, 2, 2,     0),
+	PLL_36XX_RATE(330000000, 110, 2, 2,     0),
+	PLL_36XX_RATE(320000015, 106, 2, 2, 43691),
+	PLL_36XX_RATE(300000000, 100, 2, 2,     0),
+	PLL_36XX_RATE(275000000, 275, 3, 3,     0),
+	PLL_36XX_RATE(222750000, 148, 2, 3, 32768),
+	PLL_36XX_RATE(222528007, 148, 2, 3, 23069),
+	PLL_36XX_RATE(160000000, 160, 3, 3,     0),
+	PLL_36XX_RATE(148500000,  99, 2, 3,     0),
+	PLL_36XX_RATE(148352005,  98, 2, 3, 59070),
+	PLL_36XX_RATE(108000000, 144, 2, 4,     0),
+	PLL_36XX_RATE( 74250000,  99, 2, 4,     0),
+	PLL_36XX_RATE( 74176002,  98, 3, 4, 59070),
+	PLL_36XX_RATE( 54054000, 216, 3, 5, 14156),
+	PLL_36XX_RATE( 54000000, 144, 2, 5,     0),
+	{ /* sentinel */ }
+};
+
+static struct samsung_pll_clock exynos3250_plls[nr_plls] __initdata = {
+	[apll] = PLL(pll_35xx, CLK_FOUT_APLL, "fout_apll", "fin_pll",
+			APLL_LOCK, APLL_CON0, NULL),
+	[mpll] = PLL(pll_35xx, CLK_FOUT_MPLL, "fout_mpll", "fin_pll",
+			MPLL_LOCK, MPLL_CON0, NULL),
+	[vpll] = PLL(pll_36xx, CLK_FOUT_VPLL, "fout_vpll", "fin_pll",
+			VPLL_LOCK, VPLL_CON0, NULL),
+	[upll] = PLL(pll_35xx, CLK_FOUT_UPLL, "fout_upll", "fin_pll",
+			UPLL_LOCK, UPLL_CON0, NULL),
+};
+
+static void __init exynos3250_cmu_init(struct device_node *np)
+{
+	struct samsung_clk_provider *ctx;
+
+	reg_base = of_iomap(np, 0);
+	if (!reg_base)
+		panic("%s: failed to map registers\n", __func__);
+
+	ctx = samsung_clk_init(np, reg_base, CLK_NR_CLKS);
+	if (!ctx)
+		panic("%s: unable to allocate context.\n", __func__);
+
+	samsung_clk_register_fixed_factor(ctx, fixed_factor_clks,
+					  ARRAY_SIZE(fixed_factor_clks));
+
+	exynos3250_plls[apll].rate_table = exynos3250_pll_rates;
+	exynos3250_plls[mpll].rate_table = exynos3250_pll_rates;
+	exynos3250_plls[vpll].rate_table = exynos3250_vpll_rates;
+	exynos3250_plls[upll].rate_table = exynos3250_pll_rates;
+
+	samsung_clk_register_pll(ctx, exynos3250_plls,
+					ARRAY_SIZE(exynos3250_plls), reg_base);
+
+	samsung_clk_register_mux(ctx, mux_clks, ARRAY_SIZE(mux_clks));
+	samsung_clk_register_div(ctx, div_clks, ARRAY_SIZE(div_clks));
+	samsung_clk_register_gate(ctx, gate_clks, ARRAY_SIZE(gate_clks));
+
+	exynos3250_clk_sleep_init();
+}
+CLK_OF_DECLARE(exynos3250_cmu, "samsung,exynos3250-cmu", exynos3250_cmu_init);

drivers/clk/samsung/clk-exynos4.c

@@ -428,7 +428,7 @@ static struct samsung_fixed_rate_clock exynos4_fixed_rate_ext_clks[] __initdata
 /* fixed rate clocks generated inside the soc */
 static struct samsung_fixed_rate_clock exynos4_fixed_rate_clks[] __initdata = {
 	FRATE(0, "sclk_hdmi24m", NULL, CLK_IS_ROOT, 24000000),
-	FRATE(0, "sclk_hdmiphy", NULL, CLK_IS_ROOT, 27000000),
+	FRATE(CLK_SCLK_HDMIPHY, "sclk_hdmiphy", NULL, CLK_IS_ROOT, 27000000),
 	FRATE(0, "sclk_usbphy0", NULL, CLK_IS_ROOT, 48000000),
 };
 
@@ -903,7 +903,7 @@ static struct samsung_gate_clock exynos4x12_gate_clks[] __initdata = {
 	GATE(CLK_AUDSS, "audss", "sclk_epll", E4X12_GATE_IP_MAUDIO, 0, 0, 0),
 	GATE(CLK_MDNIE0, "mdnie0", "aclk160", GATE_IP_LCD0, 2, 0, 0),
 	GATE(CLK_ROTATOR, "rotator", "aclk200", E4X12_GATE_IP_IMAGE, 1, 0, 0),
-	GATE(CLK_MDMA2, "mdma2", "aclk200", E4X12_GATE_IP_IMAGE, 2, 0, 0),
+	GATE(CLK_MDMA, "mdma", "aclk200", E4X12_GATE_IP_IMAGE, 2, 0, 0),
 	GATE(CLK_SMMU_MDMA, "smmu_mdma", "aclk200", E4X12_GATE_IP_IMAGE, 5, 0,
 		0),
 	GATE(CLK_MIPI_HSI, "mipi_hsi", "aclk133", GATE_IP_FSYS, 10, 0, 0),
@@ -1043,7 +1043,7 @@ static unsigned long exynos4_get_xom(void)
 	return xom;
 }
 
-static void __init exynos4_clk_register_finpll(void)
+static void __init exynos4_clk_register_finpll(struct samsung_clk_provider *ctx)
 {
 	struct samsung_fixed_rate_clock fclk;
 	struct clk *clk;
@@ -1066,7 +1066,7 @@ static void __init exynos4_clk_register_finpll(void)
 	fclk.parent_name = NULL;
 	fclk.flags = CLK_IS_ROOT;
 	fclk.fixed_rate = finpll_f;
-	samsung_clk_register_fixed_rate(&fclk, 1);
+	samsung_clk_register_fixed_rate(ctx, &fclk, 1);
 
 }
 
@@ -1176,22 +1176,25 @@ static struct samsung_pll_clock exynos4x12_plls[nr_plls] __initdata = {
 static void __init exynos4_clk_init(struct device_node *np,
 				    enum exynos4_soc soc)
 {
+	struct samsung_clk_provider *ctx;
 	exynos4_soc = soc;
 
 	reg_base = of_iomap(np, 0);
 	if (!reg_base)
 		panic("%s: failed to map registers\n", __func__);
 
-	samsung_clk_init(np, reg_base, CLK_NR_CLKS);
+	ctx = samsung_clk_init(np, reg_base, CLK_NR_CLKS);
+	if (!ctx)
+		panic("%s: unable to allocate context.\n", __func__);
 
-	samsung_clk_of_register_fixed_ext(exynos4_fixed_rate_ext_clks,
+	samsung_clk_of_register_fixed_ext(ctx, exynos4_fixed_rate_ext_clks,
 			ARRAY_SIZE(exynos4_fixed_rate_ext_clks),
 			ext_clk_match);
 
-	exynos4_clk_register_finpll();
+	exynos4_clk_register_finpll(ctx);
 
 	if (exynos4_soc == EXYNOS4210) {
-		samsung_clk_register_mux(exynos4210_mux_early,
+		samsung_clk_register_mux(ctx, exynos4210_mux_early,
 					ARRAY_SIZE(exynos4210_mux_early));
 
 		if (_get_rate("fin_pll") == 24000000) {
@@ -1205,7 +1208,7 @@ static void __init exynos4_clk_init(struct device_node *np,
 			exynos4210_plls[vpll].rate_table =
 							exynos4210_vpll_rates;
 
-		samsung_clk_register_pll(exynos4210_plls,
+		samsung_clk_register_pll(ctx, exynos4210_plls,
 					ARRAY_SIZE(exynos4210_plls), reg_base);
 	} else {
 		if (_get_rate("fin_pll") == 24000000) {
@@ -1217,42 +1220,42 @@ static void __init exynos4_clk_init(struct device_node *np,
 							exynos4x12_vpll_rates;
 		}
 
-		samsung_clk_register_pll(exynos4x12_plls,
+		samsung_clk_register_pll(ctx, exynos4x12_plls,
 					ARRAY_SIZE(exynos4x12_plls), reg_base);
 	}
 
-	samsung_clk_register_fixed_rate(exynos4_fixed_rate_clks,
+	samsung_clk_register_fixed_rate(ctx, exynos4_fixed_rate_clks,
 			ARRAY_SIZE(exynos4_fixed_rate_clks));
-	samsung_clk_register_mux(exynos4_mux_clks,
+	samsung_clk_register_mux(ctx, exynos4_mux_clks,
 			ARRAY_SIZE(exynos4_mux_clks));
-	samsung_clk_register_div(exynos4_div_clks,
+	samsung_clk_register_div(ctx, exynos4_div_clks,
 			ARRAY_SIZE(exynos4_div_clks));
-	samsung_clk_register_gate(exynos4_gate_clks,
+	samsung_clk_register_gate(ctx, exynos4_gate_clks,
 			ARRAY_SIZE(exynos4_gate_clks));
 
 	if (exynos4_soc == EXYNOS4210) {
-		samsung_clk_register_fixed_rate(exynos4210_fixed_rate_clks,
+		samsung_clk_register_fixed_rate(ctx, exynos4210_fixed_rate_clks,
 			ARRAY_SIZE(exynos4210_fixed_rate_clks));
-		samsung_clk_register_mux(exynos4210_mux_clks,
+		samsung_clk_register_mux(ctx, exynos4210_mux_clks,
 			ARRAY_SIZE(exynos4210_mux_clks));
-		samsung_clk_register_div(exynos4210_div_clks,
+		samsung_clk_register_div(ctx, exynos4210_div_clks,
 			ARRAY_SIZE(exynos4210_div_clks));
-		samsung_clk_register_gate(exynos4210_gate_clks,
+		samsung_clk_register_gate(ctx, exynos4210_gate_clks,
 			ARRAY_SIZE(exynos4210_gate_clks));
-		samsung_clk_register_alias(exynos4210_aliases,
+		samsung_clk_register_alias(ctx, exynos4210_aliases,
 			ARRAY_SIZE(exynos4210_aliases));
 	} else {
-		samsung_clk_register_mux(exynos4x12_mux_clks,
+		samsung_clk_register_mux(ctx, exynos4x12_mux_clks,
 			ARRAY_SIZE(exynos4x12_mux_clks));
-		samsung_clk_register_div(exynos4x12_div_clks,
+		samsung_clk_register_div(ctx, exynos4x12_div_clks,
 			ARRAY_SIZE(exynos4x12_div_clks));
-		samsung_clk_register_gate(exynos4x12_gate_clks,
+		samsung_clk_register_gate(ctx, exynos4x12_gate_clks,
 			ARRAY_SIZE(exynos4x12_gate_clks));
-		samsung_clk_register_alias(exynos4x12_aliases,
+		samsung_clk_register_alias(ctx, exynos4x12_aliases,
 			ARRAY_SIZE(exynos4x12_aliases));
 	}
 
-	samsung_clk_register_alias(exynos4_aliases,
+	samsung_clk_register_alias(ctx, exynos4_aliases,
 			ARRAY_SIZE(exynos4_aliases));
 
 	exynos4_clk_sleep_init();

drivers/clk/samsung/clk-exynos5250.c

@@ -37,6 +37,7 @@
 #define VPLL_CON0		0x10140
 #define GPLL_CON0		0x10150
 #define SRC_TOP0		0x10210
+#define SRC_TOP1		0x10214
 #define SRC_TOP2		0x10218
 #define SRC_TOP3		0x1021c
 #define SRC_GSCL		0x10220
@@ -71,6 +72,7 @@
 #define GATE_IP_GSCL		0x10920
 #define GATE_IP_DISP1		0x10928
 #define GATE_IP_MFC		0x1092c
+#define GATE_IP_G3D		0x10930
 #define GATE_IP_GEN		0x10934
 #define GATE_IP_FSYS		0x10944
 #define GATE_IP_PERIC		0x10950
@@ -100,6 +102,7 @@ static unsigned long exynos5250_clk_regs[] __initdata = {
 	DIV_CPU0,
 	SRC_CORE1,
 	SRC_TOP0,
+	SRC_TOP1,
 	SRC_TOP2,
 	SRC_TOP3,
 	SRC_GSCL,
@@ -133,6 +136,7 @@ static unsigned long exynos5250_clk_regs[] __initdata = {
 	DIV_PERIC5,
 	GATE_IP_GSCL,
 	GATE_IP_MFC,
+	GATE_IP_G3D,
 	GATE_IP_GEN,
 	GATE_IP_FSYS,
 	GATE_IP_PERIC,
@@ -189,10 +193,12 @@ PNAME(mout_vpllsrc_p)	= { "fin_pll", "sclk_hdmi27m" };
 PNAME(mout_vpll_p)	= { "mout_vpllsrc", "fout_vpll" };
 PNAME(mout_cpll_p)	= { "fin_pll", "fout_cpll" };
 PNAME(mout_epll_p)	= { "fin_pll", "fout_epll" };
+PNAME(mout_gpll_p)	= { "fin_pll", "fout_gpll" };
 PNAME(mout_mpll_user_p)	= { "fin_pll", "mout_mpll" };
 PNAME(mout_bpll_user_p)	= { "fin_pll", "mout_bpll" };
 PNAME(mout_aclk166_p)	= { "mout_cpll", "mout_mpll_user" };
 PNAME(mout_aclk200_p)	= { "mout_mpll_user", "mout_bpll_user" };
+PNAME(mout_aclk400_p)	= { "mout_aclk400_g3d_mid", "mout_gpll" };
 PNAME(mout_aclk200_sub_p) = { "fin_pll", "div_aclk200" };
 PNAME(mout_aclk266_sub_p) = { "fin_pll", "div_aclk266" };
 PNAME(mout_aclk333_sub_p) = { "fin_pll", "div_aclk333" };
@@ -273,12 +279,16 @@ static struct samsung_mux_clock exynos5250_mux_clks[] __initdata = {
 	MUX(0, "mout_aclk166", mout_aclk166_p, SRC_TOP0, 8, 1),
 	MUX(0, "mout_aclk200", mout_aclk200_p, SRC_TOP0, 12, 1),
 	MUX(0, "mout_aclk333", mout_aclk166_p, SRC_TOP0, 16, 1),
+	MUX(0, "mout_aclk400_g3d_mid", mout_aclk200_p, SRC_TOP0, 20, 1),
+
+	MUX(0, "mout_aclk400_g3d", mout_aclk400_p, SRC_TOP1, 28, 1),
 
 	MUX(0, "mout_cpll", mout_cpll_p, SRC_TOP2, 8, 1),
 	MUX(0, "mout_epll", mout_epll_p, SRC_TOP2, 12, 1),
 	MUX(0, "mout_vpll", mout_vpll_p, SRC_TOP2, 16, 1),
 	MUX(0, "mout_mpll_user", mout_mpll_user_p, SRC_TOP2, 20, 1),
 	MUX(0, "mout_bpll_user", mout_bpll_user_p, SRC_TOP2, 24, 1),
+	MUX(CLK_MOUT_GPLL, "mout_gpll", mout_gpll_p, SRC_TOP2, 28, 1),
 
 	MUX(0, "mout_aclk200_disp1_sub", mout_aclk200_sub_p, SRC_TOP3, 4, 1),
 	MUX(0, "mout_aclk266_gscl_sub", mout_aclk266_sub_p, SRC_TOP3, 8, 1),
@@ -351,6 +361,8 @@ static struct samsung_div_clock exynos5250_div_clks[] __initdata = {
 	DIV(0, "div_aclk200", "mout_aclk200", DIV_TOP0, 12, 3),
 	DIV(0, "div_aclk266", "mout_mpll_user", DIV_TOP0, 16, 3),
 	DIV(0, "div_aclk333", "mout_aclk333", DIV_TOP0, 20, 3),
+	DIV(0, "div_aclk400_g3d", "mout_aclk400_g3d", DIV_TOP0,
+							24, 3),
 
 	DIV(0, "div_aclk66_pre", "mout_mpll_user", DIV_TOP1, 24, 3),
 
@@ -428,6 +440,7 @@ static struct samsung_gate_clock exynos5250_gate_clks[] __initdata = {
 	 * CMU_ACP
 	 */
 	GATE(CLK_MDMA0, "mdma0", "div_aclk266", GATE_IP_ACP, 1, 0, 0),
+	GATE(CLK_SSS, "sss", "div_aclk266", GATE_IP_ACP, 2, 0, 0),
 	GATE(CLK_G2D, "g2d", "div_aclk200", GATE_IP_ACP, 3, 0, 0),
 	GATE(CLK_SMMU_MDMA0, "smmu_mdma0", "div_aclk266", GATE_IP_ACP, 5, 0, 0),
 
@@ -533,7 +546,8 @@ static struct samsung_gate_clock exynos5250_gate_clks[] __initdata = {
 		0),
 	GATE(CLK_SMMU_MFCL, "smmu_mfcl", "mout_aclk333_sub", GATE_IP_MFC, 2, 0,
 		0),
-
+	GATE(CLK_G3D, "g3d", "div_aclk400_g3d", GATE_IP_G3D, 0,
+					CLK_SET_RATE_PARENT, 0),
 	GATE(CLK_ROTATOR, "rotator", "div_aclk266", GATE_IP_GEN, 1, 0, 0),
 	GATE(CLK_JPEG, "jpeg", "div_aclk166", GATE_IP_GEN, 2, 0, 0),
 	GATE(CLK_MDMA1, "mdma1", "div_aclk266", GATE_IP_GEN, 4, 0, 0),
@@ -686,6 +700,8 @@ static struct of_device_id ext_clk_match[] __initdata = {
 /* register exynox5250 clocks */
 static void __init exynos5250_clk_init(struct device_node *np)
 {
+	struct samsung_clk_provider *ctx;
+
 	if (np) {
 		reg_base = of_iomap(np, 0);
 		if (!reg_base)
@@ -694,11 +710,13 @@ static void __init exynos5250_clk_init(struct device_node *np)
 		panic("%s: unable to determine soc\n", __func__);
 	}
 
-	samsung_clk_init(np, reg_base, CLK_NR_CLKS);
-	samsung_clk_of_register_fixed_ext(exynos5250_fixed_rate_ext_clks,
+	ctx = samsung_clk_init(np, reg_base, CLK_NR_CLKS);
+	if (!ctx)
+		panic("%s: unable to allocate context.\n", __func__);
+	samsung_clk_of_register_fixed_ext(ctx, exynos5250_fixed_rate_ext_clks,
 			ARRAY_SIZE(exynos5250_fixed_rate_ext_clks),
 			ext_clk_match);
-	samsung_clk_register_mux(exynos5250_pll_pmux_clks,
+	samsung_clk_register_mux(ctx, exynos5250_pll_pmux_clks,
 				ARRAY_SIZE(exynos5250_pll_pmux_clks));
 
 	if (_get_rate("fin_pll") == 24 * MHZ) {
@@ -709,17 +727,18 @@ static void __init exynos5250_clk_init(struct device_node *np)
 	if (_get_rate("mout_vpllsrc") == 24 * MHZ)
 		exynos5250_plls[vpll].rate_table =  vpll_24mhz_tbl;
 
-	samsung_clk_register_pll(exynos5250_plls, ARRAY_SIZE(exynos5250_plls),
-					reg_base);
-	samsung_clk_register_fixed_rate(exynos5250_fixed_rate_clks,
+	samsung_clk_register_pll(ctx, exynos5250_plls,
+			ARRAY_SIZE(exynos5250_plls),
+			reg_base);
+	samsung_clk_register_fixed_rate(ctx, exynos5250_fixed_rate_clks,
 			ARRAY_SIZE(exynos5250_fixed_rate_clks));
-	samsung_clk_register_fixed_factor(exynos5250_fixed_factor_clks,
+	samsung_clk_register_fixed_factor(ctx, exynos5250_fixed_factor_clks,
 			ARRAY_SIZE(exynos5250_fixed_factor_clks));
-	samsung_clk_register_mux(exynos5250_mux_clks,
+	samsung_clk_register_mux(ctx, exynos5250_mux_clks,
 			ARRAY_SIZE(exynos5250_mux_clks));
-	samsung_clk_register_div(exynos5250_div_clks,
+	samsung_clk_register_div(ctx, exynos5250_div_clks,
 			ARRAY_SIZE(exynos5250_div_clks));
-	samsung_clk_register_gate(exynos5250_gate_clks,
+	samsung_clk_register_gate(ctx, exynos5250_gate_clks,
 			ARRAY_SIZE(exynos5250_gate_clks));
 
 	exynos5250_clk_sleep_init();

drivers/clk/samsung/clk-exynos5260.c

@@ -0,0 +1,1980 @@
+/*
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ * Author: Rahul Sharma <rahul.sharma@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Common Clock Framework support for Exynos5260 SoC.
+ */
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/syscore_ops.h>
+
+#include "clk-exynos5260.h"
+#include "clk.h"
+#include "clk-pll.h"
+
+#include <dt-bindings/clock/exynos5260-clk.h>
+
+static LIST_HEAD(clock_reg_cache_list);
+
+struct exynos5260_clock_reg_cache {
+	struct list_head node;
+	void __iomem *reg_base;
+	struct samsung_clk_reg_dump *rdump;
+	unsigned int rd_num;
+};
+
+struct exynos5260_cmu_info {
+	/* list of pll clocks and respective count */
+	struct samsung_pll_clock *pll_clks;
+	unsigned int nr_pll_clks;
+	/* list of mux clocks and respective count */
+	struct samsung_mux_clock *mux_clks;
+	unsigned int nr_mux_clks;
+	/* list of div clocks and respective count */
+	struct samsung_div_clock *div_clks;
+	unsigned int nr_div_clks;
+	/* list of gate clocks and respective count */
+	struct samsung_gate_clock *gate_clks;
+	unsigned int nr_gate_clks;
+	/* list of fixed clocks and respective count */
+	struct samsung_fixed_rate_clock *fixed_clks;
+	unsigned int nr_fixed_clks;
+	/* total number of clocks with IDs assigned*/
+	unsigned int nr_clk_ids;
+
+	/* list and number of clocks registers */
+	unsigned long *clk_regs;
+	unsigned int nr_clk_regs;
+};
+
+/*
+ * Applicable for all 2550 Type PLLS for Exynos5260, listed below
+ * DISP_PLL, EGL_PLL, KFC_PLL, MEM_PLL, BUS_PLL, MEDIA_PLL, G3D_PLL.
+ */
+static struct samsung_pll_rate_table pll2550_24mhz_tbl[] __initdata = {
+	PLL_35XX_RATE(1700000000, 425, 6, 0),
+	PLL_35XX_RATE(1600000000, 200, 3, 0),
+	PLL_35XX_RATE(1500000000, 250, 4, 0),
+	PLL_35XX_RATE(1400000000, 175, 3, 0),
+	PLL_35XX_RATE(1300000000, 325, 6, 0),
+	PLL_35XX_RATE(1200000000, 400, 4, 1),
+	PLL_35XX_RATE(1100000000, 275, 3, 1),
+	PLL_35XX_RATE(1000000000, 250, 3, 1),
+	PLL_35XX_RATE(933000000, 311, 4, 1),
+	PLL_35XX_RATE(900000000, 300, 4, 1),
+	PLL_35XX_RATE(800000000, 200, 3, 1),
+	PLL_35XX_RATE(733000000, 733, 12, 1),
+	PLL_35XX_RATE(700000000, 175, 3, 1),
+	PLL_35XX_RATE(667000000, 667, 12, 1),
+	PLL_35XX_RATE(633000000, 211, 4, 1),
+	PLL_35XX_RATE(620000000, 310, 3, 2),
+	PLL_35XX_RATE(600000000, 400, 4, 2),
+	PLL_35XX_RATE(543000000, 362, 4, 2),
+	PLL_35XX_RATE(533000000, 533, 6, 2),
+	PLL_35XX_RATE(500000000, 250, 3, 2),
+	PLL_35XX_RATE(450000000, 300, 4, 2),
+	PLL_35XX_RATE(400000000, 200, 3, 2),
+	PLL_35XX_RATE(350000000, 175, 3, 2),
+	PLL_35XX_RATE(300000000, 400, 4, 3),
+	PLL_35XX_RATE(266000000, 266, 3, 3),
+	PLL_35XX_RATE(200000000, 200, 3, 3),
+	PLL_35XX_RATE(160000000, 160, 3, 3),
+};
+
+/*
+ * Applicable for 2650 Type PLL for AUD_PLL.
+ */
+static struct samsung_pll_rate_table pll2650_24mhz_tbl[] __initdata = {
+	PLL_36XX_RATE(1600000000, 200, 3, 0, 0),
+	PLL_36XX_RATE(1200000000, 100, 2, 0, 0),
+	PLL_36XX_RATE(1000000000, 250, 3, 1, 0),
+	PLL_36XX_RATE(800000000, 200, 3, 1, 0),
+	PLL_36XX_RATE(600000000, 100, 2, 1, 0),
+	PLL_36XX_RATE(532000000, 266, 3, 2, 0),
+	PLL_36XX_RATE(480000000, 160, 2, 2, 0),
+	PLL_36XX_RATE(432000000, 144, 2, 2, 0),
+	PLL_36XX_RATE(400000000, 200, 3, 2, 0),
+	PLL_36XX_RATE(394073130, 459, 7, 2, 49282),
+	PLL_36XX_RATE(333000000, 111, 2, 2, 0),
+	PLL_36XX_RATE(300000000, 100, 2, 2, 0),
+	PLL_36XX_RATE(266000000, 266, 3, 3, 0),
+	PLL_36XX_RATE(200000000, 200, 3, 3, 0),
+	PLL_36XX_RATE(166000000, 166, 3, 3, 0),
+	PLL_36XX_RATE(133000000, 266, 3, 4, 0),
+	PLL_36XX_RATE(100000000, 200, 3, 4, 0),
+	PLL_36XX_RATE(66000000, 176, 2, 5, 0),
+};
+
+#ifdef CONFIG_PM_SLEEP
+
+static int exynos5260_clk_suspend(void)
+{
+	struct exynos5260_clock_reg_cache *cache;
+
+	list_for_each_entry(cache, &clock_reg_cache_list, node)
+		samsung_clk_save(cache->reg_base, cache->rdump,
+				cache->rd_num);
+
+	return 0;
+}
+
+static void exynos5260_clk_resume(void)
+{
+	struct exynos5260_clock_reg_cache *cache;
+
+	list_for_each_entry(cache, &clock_reg_cache_list, node)
+		samsung_clk_restore(cache->reg_base, cache->rdump,
+				cache->rd_num);
+}
+
+static struct syscore_ops exynos5260_clk_syscore_ops = {
+	.suspend = exynos5260_clk_suspend,
+	.resume = exynos5260_clk_resume,
+};
+
+static void exynos5260_clk_sleep_init(void __iomem *reg_base,
+			unsigned long *rdump,
+			unsigned long nr_rdump)
+{
+	struct exynos5260_clock_reg_cache *reg_cache;
+
+	reg_cache = kzalloc(sizeof(struct exynos5260_clock_reg_cache),
+			GFP_KERNEL);
+	if (!reg_cache)
+		panic("could not allocate register cache.\n");
+
+	reg_cache->rdump = samsung_clk_alloc_reg_dump(rdump, nr_rdump);
+
+	if (!reg_cache->rdump)
+		panic("could not allocate register dump storage.\n");
+
+	if (list_empty(&clock_reg_cache_list))
+		register_syscore_ops(&exynos5260_clk_syscore_ops);
+
+	reg_cache->rd_num = nr_rdump;
+	reg_cache->reg_base = reg_base;
+	list_add_tail(&reg_cache->node, &clock_reg_cache_list);
+}
+
+#else
+static void exynos5260_clk_sleep_init(void __iomem *reg_base,
+			unsigned long *rdump,
+			unsigned long nr_rdump){}
+#endif
+
+/*
+ * Common function which registers plls, muxes, dividers and gates
+ * for each CMU. It also add CMU register list to register cache.
+ */
+
+void __init exynos5260_cmu_register_one(struct device_node *np,
+			struct exynos5260_cmu_info *cmu)
+{
+	void __iomem *reg_base;
+	struct samsung_clk_provider *ctx;
+
+	reg_base = of_iomap(np, 0);
+	if (!reg_base)
+		panic("%s: failed to map registers\n", __func__);
+
+	ctx = samsung_clk_init(np, reg_base, cmu->nr_clk_ids);
+	if (!ctx)
+		panic("%s: unable to alllocate ctx\n", __func__);
+
+	if (cmu->pll_clks)
+		samsung_clk_register_pll(ctx, cmu->pll_clks, cmu->nr_pll_clks,
+			reg_base);
+	if (cmu->mux_clks)
+		samsung_clk_register_mux(ctx,  cmu->mux_clks,
+			cmu->nr_mux_clks);
+	if (cmu->div_clks)
+		samsung_clk_register_div(ctx, cmu->div_clks, cmu->nr_div_clks);
+	if (cmu->gate_clks)
+		samsung_clk_register_gate(ctx, cmu->gate_clks,
+			cmu->nr_gate_clks);
+	if (cmu->fixed_clks)
+		samsung_clk_register_fixed_rate(ctx, cmu->fixed_clks,
+			cmu->nr_fixed_clks);
+	if (cmu->clk_regs)
+		exynos5260_clk_sleep_init(reg_base, cmu->clk_regs,
+			cmu->nr_clk_regs);
+}
+
+
+/* CMU_AUD */
+
+static unsigned long aud_clk_regs[] __initdata = {
+	MUX_SEL_AUD,
+	DIV_AUD0,
+	DIV_AUD1,
+	EN_ACLK_AUD,
+	EN_PCLK_AUD,
+	EN_SCLK_AUD,
+	EN_IP_AUD,
+};
+
+PNAME(mout_aud_pll_user_p) = {"fin_pll", "fout_aud_pll"};
+PNAME(mout_sclk_aud_i2s_p) = {"mout_aud_pll_user", "ioclk_i2s_cdclk"};
+PNAME(mout_sclk_aud_pcm_p) = {"mout_aud_pll_user", "ioclk_pcm_extclk"};
+
+struct samsung_mux_clock aud_mux_clks[] __initdata = {
+	MUX(AUD_MOUT_AUD_PLL_USER, "mout_aud_pll_user", mout_aud_pll_user_p,
+			MUX_SEL_AUD, 0, 1),
+	MUX(AUD_MOUT_SCLK_AUD_I2S, "mout_sclk_aud_i2s", mout_sclk_aud_i2s_p,
+			MUX_SEL_AUD, 4, 1),
+	MUX(AUD_MOUT_SCLK_AUD_PCM, "mout_sclk_aud_pcm", mout_sclk_aud_pcm_p,
+			MUX_SEL_AUD, 8, 1),
+};
+
+struct samsung_div_clock aud_div_clks[] __initdata = {
+	DIV(AUD_DOUT_ACLK_AUD_131, "dout_aclk_aud_131", "mout_aud_pll_user",
+			DIV_AUD0, 0, 4),
+
+	DIV(AUD_DOUT_SCLK_AUD_I2S, "dout_sclk_aud_i2s", "mout_sclk_aud_i2s",
+			DIV_AUD1, 0, 4),
+	DIV(AUD_DOUT_SCLK_AUD_PCM, "dout_sclk_aud_pcm", "mout_sclk_aud_pcm",
+			DIV_AUD1, 4, 8),
+	DIV(AUD_DOUT_SCLK_AUD_UART, "dout_sclk_aud_uart", "mout_aud_pll_user",
+			DIV_AUD1, 12, 4),
+};
+
+struct samsung_gate_clock aud_gate_clks[] __initdata = {
+	GATE(AUD_SCLK_I2S, "sclk_aud_i2s", "dout_sclk_aud_i2s",
+			EN_SCLK_AUD, 0, CLK_SET_RATE_PARENT, 0),
+	GATE(AUD_SCLK_PCM, "sclk_aud_pcm", "dout_sclk_aud_pcm",
+			EN_SCLK_AUD, 1, CLK_SET_RATE_PARENT, 0),
+	GATE(AUD_SCLK_AUD_UART, "sclk_aud_uart", "dout_sclk_aud_uart",
+			EN_SCLK_AUD, 2, CLK_SET_RATE_PARENT, 0),
+
+	GATE(AUD_CLK_SRAMC, "clk_sramc", "dout_aclk_aud_131", EN_IP_AUD,
+			0, 0, 0),
+	GATE(AUD_CLK_DMAC, "clk_dmac", "dout_aclk_aud_131",
+			EN_IP_AUD, 1, 0, 0),
+	GATE(AUD_CLK_I2S, "clk_i2s", "dout_aclk_aud_131", EN_IP_AUD, 2, 0, 0),
+	GATE(AUD_CLK_PCM, "clk_pcm", "dout_aclk_aud_131", EN_IP_AUD, 3, 0, 0),
+	GATE(AUD_CLK_AUD_UART, "clk_aud_uart", "dout_aclk_aud_131",
+			EN_IP_AUD, 4, 0, 0),
+};
+
+static void __init exynos5260_clk_aud_init(struct device_node *np)
+{
+	struct exynos5260_cmu_info cmu = {0};
+
+	cmu.mux_clks = aud_mux_clks;
+	cmu.nr_mux_clks = ARRAY_SIZE(aud_mux_clks);
+	cmu.div_clks = aud_div_clks;
+	cmu.nr_div_clks = ARRAY_SIZE(aud_div_clks);
+	cmu.gate_clks = aud_gate_clks;
+	cmu.nr_gate_clks = ARRAY_SIZE(aud_gate_clks);
+	cmu.nr_clk_ids = AUD_NR_CLK;
+	cmu.clk_regs = aud_clk_regs;
+	cmu.nr_clk_regs = ARRAY_SIZE(aud_clk_regs);
+
+	exynos5260_cmu_register_one(np, &cmu);
+}
+
+CLK_OF_DECLARE(exynos5260_clk_aud, "samsung,exynos5260-clock-aud",
+		exynos5260_clk_aud_init);
+
+
+/* CMU_DISP */
+
+static unsigned long disp_clk_regs[] __initdata = {
+	MUX_SEL_DISP0,
+	MUX_SEL_DISP1,
+	MUX_SEL_DISP2,
+	MUX_SEL_DISP3,
+	MUX_SEL_DISP4,
+	DIV_DISP,
+	EN_ACLK_DISP,
+	EN_PCLK_DISP,
+	EN_SCLK_DISP0,
+	EN_SCLK_DISP1,
+	EN_IP_DISP,
+	EN_IP_DISP_BUS,
+};
+
+PNAME(mout_phyclk_dptx_phy_ch3_txd_clk_user_p) = {"fin_pll",
+			"phyclk_dptx_phy_ch3_txd_clk"};
+PNAME(mout_phyclk_dptx_phy_ch2_txd_clk_user_p) = {"fin_pll",
+			"phyclk_dptx_phy_ch2_txd_clk"};
+PNAME(mout_phyclk_dptx_phy_ch1_txd_clk_user_p) = {"fin_pll",
+			"phyclk_dptx_phy_ch1_txd_clk"};
+PNAME(mout_phyclk_dptx_phy_ch0_txd_clk_user_p) = {"fin_pll",
+			"phyclk_dptx_phy_ch0_txd_clk"};
+PNAME(mout_aclk_disp_222_user_p) = {"fin_pll", "dout_aclk_disp_222"};
+PNAME(mout_sclk_disp_pixel_user_p) = {"fin_pll", "dout_sclk_disp_pixel"};
+PNAME(mout_aclk_disp_333_user_p) = {"fin_pll", "dout_aclk_disp_333"};
+PNAME(mout_phyclk_hdmi_phy_tmds_clko_user_p) = {"fin_pll",
+			"phyclk_hdmi_phy_tmds_clko"};
+PNAME(mout_phyclk_hdmi_phy_ref_clko_user_p) = {"fin_pll",
+			"phyclk_hdmi_phy_ref_clko"};
+PNAME(mout_phyclk_hdmi_phy_pixel_clko_user_p) = {"fin_pll",
+			"phyclk_hdmi_phy_pixel_clko"};
+PNAME(mout_phyclk_hdmi_link_o_tmds_clkhi_user_p) = {"fin_pll",
+			"phyclk_hdmi_link_o_tmds_clkhi"};
+PNAME(mout_phyclk_mipi_dphy_4l_m_txbyte_clkhs_p) = {"fin_pll",
+			"phyclk_mipi_dphy_4l_m_txbyte_clkhs"};
+PNAME(mout_phyclk_dptx_phy_o_ref_clk_24m_user_p) = {"fin_pll",
+			"phyclk_dptx_phy_o_ref_clk_24m"};
+PNAME(mout_phyclk_dptx_phy_clk_div2_user_p) = {"fin_pll",
+			"phyclk_dptx_phy_clk_div2"};
+PNAME(mout_sclk_hdmi_pixel_p) = {"mout_sclk_disp_pixel_user",
+			"mout_aclk_disp_222_user"};
+PNAME(mout_phyclk_mipi_dphy_4lmrxclk_esc0_user_p) = {"fin_pll",
+			"phyclk_mipi_dphy_4l_m_rxclkesc0"};
+PNAME(mout_sclk_hdmi_spdif_p) = {"fin_pll", "ioclk_spdif_extclk",
+			"dout_aclk_peri_aud", "phyclk_hdmi_phy_ref_cko"};
+
+struct samsung_mux_clock disp_mux_clks[] __initdata = {
+	MUX(DISP_MOUT_ACLK_DISP_333_USER, "mout_aclk_disp_333_user",
+			mout_aclk_disp_333_user_p,
+			MUX_SEL_DISP0, 0, 1),
+	MUX(DISP_MOUT_SCLK_DISP_PIXEL_USER, "mout_sclk_disp_pixel_user",
+			mout_sclk_disp_pixel_user_p,
+			MUX_SEL_DISP0, 4, 1),
+	MUX(DISP_MOUT_ACLK_DISP_222_USER, "mout_aclk_disp_222_user",
+			mout_aclk_disp_222_user_p,
+			MUX_SEL_DISP0, 8, 1),
+	MUX(DISP_MOUT_PHYCLK_DPTX_PHY_CH0_TXD_CLK_USER,
+			"mout_phyclk_dptx_phy_ch0_txd_clk_user",
+			mout_phyclk_dptx_phy_ch0_txd_clk_user_p,
+			MUX_SEL_DISP0, 16, 1),
+	MUX(DISP_MOUT_PHYCLK_DPTX_PHY_CH1_TXD_CLK_USER,
+			"mout_phyclk_dptx_phy_ch1_txd_clk_user",
+			mout_phyclk_dptx_phy_ch1_txd_clk_user_p,
+			MUX_SEL_DISP0, 20, 1),
+	MUX(DISP_MOUT_PHYCLK_DPTX_PHY_CH2_TXD_CLK_USER,
+			"mout_phyclk_dptx_phy_ch2_txd_clk_user",
+			mout_phyclk_dptx_phy_ch2_txd_clk_user_p,
+			MUX_SEL_DISP0, 24, 1),
+	MUX(DISP_MOUT_PHYCLK_DPTX_PHY_CH3_TXD_CLK_USER,
+			"mout_phyclk_dptx_phy_ch3_txd_clk_user",
+			mout_phyclk_dptx_phy_ch3_txd_clk_user_p,
+			MUX_SEL_DISP0, 28, 1),
+
+	MUX(DISP_MOUT_PHYCLK_DPTX_PHY_CLK_DIV2_USER,
+			"mout_phyclk_dptx_phy_clk_div2_user",
+			mout_phyclk_dptx_phy_clk_div2_user_p,
+			MUX_SEL_DISP1, 0, 1),
+	MUX(DISP_MOUT_PHYCLK_DPTX_PHY_O_REF_CLK_24M_USER,
+			"mout_phyclk_dptx_phy_o_ref_clk_24m_user",
+			mout_phyclk_dptx_phy_o_ref_clk_24m_user_p,
+			MUX_SEL_DISP1, 4, 1),
+	MUX(DISP_MOUT_PHYCLK_MIPI_DPHY_4L_M_TXBYTE_CLKHS,
+			"mout_phyclk_mipi_dphy_4l_m_txbyte_clkhs",
+			mout_phyclk_mipi_dphy_4l_m_txbyte_clkhs_p,
+			MUX_SEL_DISP1, 8, 1),
+	MUX(DISP_MOUT_PHYCLK_HDMI_LINK_O_TMDS_CLKHI_USER,
+			"mout_phyclk_hdmi_link_o_tmds_clkhi_user",
+			mout_phyclk_hdmi_link_o_tmds_clkhi_user_p,
+			MUX_SEL_DISP1, 16, 1),
+	MUX(DISP_MOUT_HDMI_PHY_PIXEL,
+			"mout_phyclk_hdmi_phy_pixel_clko_user",
+			mout_phyclk_hdmi_phy_pixel_clko_user_p,
+			MUX_SEL_DISP1, 20, 1),
+	MUX(DISP_MOUT_PHYCLK_HDMI_PHY_REF_CLKO_USER,
+			"mout_phyclk_hdmi_phy_ref_clko_user",
+			mout_phyclk_hdmi_phy_ref_clko_user_p,
+			MUX_SEL_DISP1, 24, 1),
+	MUX(DISP_MOUT_PHYCLK_HDMI_PHY_TMDS_CLKO_USER,
+			"mout_phyclk_hdmi_phy_tmds_clko_user",
+			mout_phyclk_hdmi_phy_tmds_clko_user_p,
+			MUX_SEL_DISP1, 28, 1),
+
+	MUX(DISP_MOUT_PHYCLK_MIPI_DPHY_4LMRXCLK_ESC0_USER,
+			"mout_phyclk_mipi_dphy_4lmrxclk_esc0_user",
+			mout_phyclk_mipi_dphy_4lmrxclk_esc0_user_p,
+			MUX_SEL_DISP2, 0, 1),
+	MUX(DISP_MOUT_SCLK_HDMI_PIXEL, "mout_sclk_hdmi_pixel",
+			mout_sclk_hdmi_pixel_p,
+			MUX_SEL_DISP2, 4, 1),
+
+	MUX(DISP_MOUT_SCLK_HDMI_SPDIF, "mout_sclk_hdmi_spdif",
+			mout_sclk_hdmi_spdif_p,
+			MUX_SEL_DISP4, 4, 2),
+};
+
+struct samsung_div_clock disp_div_clks[] __initdata = {
+	DIV(DISP_DOUT_PCLK_DISP_111, "dout_pclk_disp_111",
+			"mout_aclk_disp_222_user",
+			DIV_DISP, 8, 4),
+	DIV(DISP_DOUT_SCLK_FIMD1_EXTCLKPLL, "dout_sclk_fimd1_extclkpll",
+			"mout_sclk_disp_pixel_user",
+			DIV_DISP, 12, 4),
+	DIV(DISP_DOUT_SCLK_HDMI_PHY_PIXEL_CLKI,
+			"dout_sclk_hdmi_phy_pixel_clki",
+			"mout_sclk_hdmi_pixel",
+			DIV_DISP, 16, 4),
+};
+
+struct samsung_gate_clock disp_gate_clks[] __initdata = {
+	GATE(DISP_MOUT_HDMI_PHY_PIXEL_USER, "sclk_hdmi_link_i_pixel",
+			"mout_phyclk_hdmi_phy_pixel_clko_user",
+			EN_SCLK_DISP0, 26, CLK_SET_RATE_PARENT, 0),
+	GATE(DISP_SCLK_PIXEL, "sclk_hdmi_phy_pixel_clki",
+			"dout_sclk_hdmi_phy_pixel_clki",
+			EN_SCLK_DISP0, 29, CLK_SET_RATE_PARENT, 0),
+
+	GATE(DISP_CLK_DP, "clk_dptx_link", "mout_aclk_disp_222_user",
+			EN_IP_DISP, 4, 0, 0),
+	GATE(DISP_CLK_DPPHY, "clk_dptx_phy", "mout_aclk_disp_222_user",
+			EN_IP_DISP, 5, 0, 0),
+	GATE(DISP_CLK_DSIM1, "clk_dsim1", "mout_aclk_disp_222_user",
+			EN_IP_DISP, 6, 0, 0),
+	GATE(DISP_CLK_FIMD1, "clk_fimd1", "mout_aclk_disp_222_user",
+			EN_IP_DISP, 7, 0, 0),
+	GATE(DISP_CLK_HDMI, "clk_hdmi", "mout_aclk_disp_222_user",
+			EN_IP_DISP, 8, 0, 0),
+	GATE(DISP_CLK_HDMIPHY, "clk_hdmiphy", "mout_aclk_disp_222_user",
+			EN_IP_DISP, 9, 0, 0),
+	GATE(DISP_CLK_MIPIPHY, "clk_mipi_dphy", "mout_aclk_disp_222_user",
+			EN_IP_DISP, 10, 0, 0),
+	GATE(DISP_CLK_MIXER, "clk_mixer", "mout_aclk_disp_222_user",
+			EN_IP_DISP, 11, 0, 0),
+	GATE(DISP_CLK_PIXEL_DISP, "clk_pixel_disp", "mout_aclk_disp_222_user",
+			EN_IP_DISP, 12, CLK_IGNORE_UNUSED, 0),
+	GATE(DISP_CLK_PIXEL_MIXER, "clk_pixel_mixer", "mout_aclk_disp_222_user",
+			EN_IP_DISP, 13, CLK_IGNORE_UNUSED, 0),
+	GATE(DISP_CLK_SMMU_FIMD1M0, "clk_smmu3_fimd1m0",
+			"mout_aclk_disp_222_user",
+			EN_IP_DISP, 22, 0, 0),
+	GATE(DISP_CLK_SMMU_FIMD1M1, "clk_smmu3_fimd1m1",
+			"mout_aclk_disp_222_user",
+			EN_IP_DISP, 23, 0, 0),
+	GATE(DISP_CLK_SMMU_TV, "clk_smmu3_tv", "mout_aclk_disp_222_user",
+			EN_IP_DISP, 25, 0, 0),
+};
+
+static void __init exynos5260_clk_disp_init(struct device_node *np)
+{
+	struct exynos5260_cmu_info cmu = {0};
+
+	cmu.mux_clks = disp_mux_clks;
+	cmu.nr_mux_clks = ARRAY_SIZE(disp_mux_clks);
+	cmu.div_clks = disp_div_clks;
+	cmu.nr_div_clks = ARRAY_SIZE(disp_div_clks);
+	cmu.gate_clks = disp_gate_clks;
+	cmu.nr_gate_clks = ARRAY_SIZE(disp_gate_clks);
+	cmu.nr_clk_ids = DISP_NR_CLK;
+	cmu.clk_regs = disp_clk_regs;
+	cmu.nr_clk_regs = ARRAY_SIZE(disp_clk_regs);
+
+	exynos5260_cmu_register_one(np, &cmu);
+}
+
+CLK_OF_DECLARE(exynos5260_clk_disp, "samsung,exynos5260-clock-disp",
+		exynos5260_clk_disp_init);
+
+
+/* CMU_EGL */
+
+static unsigned long egl_clk_regs[] __initdata = {
+	EGL_PLL_LOCK,
+	EGL_PLL_CON0,
+	EGL_PLL_CON1,
+	EGL_PLL_FREQ_DET,
+	MUX_SEL_EGL,
+	MUX_ENABLE_EGL,
+	DIV_EGL,
+	DIV_EGL_PLL_FDET,
+	EN_ACLK_EGL,
+	EN_PCLK_EGL,
+	EN_SCLK_EGL,
+};
+
+PNAME(mout_egl_b_p) = {"mout_egl_pll", "dout_bus_pll"};
+PNAME(mout_egl_pll_p) = {"fin_pll", "fout_egl_pll"};
+
+struct samsung_mux_clock egl_mux_clks[] __initdata = {
+	MUX(EGL_MOUT_EGL_PLL, "mout_egl_pll", mout_egl_pll_p,
+			MUX_SEL_EGL, 4, 1),
+	MUX(EGL_MOUT_EGL_B, "mout_egl_b", mout_egl_b_p, MUX_SEL_EGL, 16, 1),
+};
+
+struct samsung_div_clock egl_div_clks[] __initdata = {
+	DIV(EGL_DOUT_EGL1, "dout_egl1", "mout_egl_b", DIV_EGL, 0, 3),
+	DIV(EGL_DOUT_EGL2, "dout_egl2", "dout_egl1", DIV_EGL, 4, 3),
+	DIV(EGL_DOUT_ACLK_EGL, "dout_aclk_egl", "dout_egl2", DIV_EGL, 8, 3),
+	DIV(EGL_DOUT_PCLK_EGL, "dout_pclk_egl", "dout_egl_atclk",
+			DIV_EGL, 12, 3),
+	DIV(EGL_DOUT_EGL_ATCLK, "dout_egl_atclk", "dout_egl2", DIV_EGL, 16, 3),
+	DIV(EGL_DOUT_EGL_PCLK_DBG, "dout_egl_pclk_dbg", "dout_egl_atclk",
+			DIV_EGL, 20, 3),
+	DIV(EGL_DOUT_EGL_PLL, "dout_egl_pll", "mout_egl_b", DIV_EGL, 24, 3),
+};
+
+static struct samsung_pll_clock egl_pll_clks[] __initdata = {
+	PLL(pll_2550xx, EGL_FOUT_EGL_PLL, "fout_egl_pll", "fin_pll",
+		EGL_PLL_LOCK, EGL_PLL_CON0,
+		pll2550_24mhz_tbl),
+};
+
+static void __init exynos5260_clk_egl_init(struct device_node *np)
+{
+	struct exynos5260_cmu_info cmu = {0};
+
+	cmu.pll_clks = egl_pll_clks;
+	cmu.nr_pll_clks =  ARRAY_SIZE(egl_pll_clks);
+	cmu.mux_clks = egl_mux_clks;
+	cmu.nr_mux_clks = ARRAY_SIZE(egl_mux_clks);
+	cmu.div_clks = egl_div_clks;
+	cmu.nr_div_clks = ARRAY_SIZE(egl_div_clks);
+	cmu.nr_clk_ids = EGL_NR_CLK;
+	cmu.clk_regs = egl_clk_regs;
+	cmu.nr_clk_regs = ARRAY_SIZE(egl_clk_regs);
+
+	exynos5260_cmu_register_one(np, &cmu);
+}
+
+CLK_OF_DECLARE(exynos5260_clk_egl, "samsung,exynos5260-clock-egl",
+		exynos5260_clk_egl_init);
+
+
+/* CMU_FSYS */
+
+static unsigned long fsys_clk_regs[] __initdata = {
+	MUX_SEL_FSYS0,
+	MUX_SEL_FSYS1,
+	EN_ACLK_FSYS,
+	EN_ACLK_FSYS_SECURE_RTIC,
+	EN_ACLK_FSYS_SECURE_SMMU_RTIC,
+	EN_SCLK_FSYS,
+	EN_IP_FSYS,
+	EN_IP_FSYS_SECURE_RTIC,
+	EN_IP_FSYS_SECURE_SMMU_RTIC,
+};
+
+PNAME(mout_phyclk_usbhost20_phyclk_user_p) = {"fin_pll",
+			"phyclk_usbhost20_phy_phyclock"};
+PNAME(mout_phyclk_usbhost20_freeclk_user_p) = {"fin_pll",
+			"phyclk_usbhost20_phy_freeclk"};
+PNAME(mout_phyclk_usbhost20_clk48mohci_user_p) = {"fin_pll",
+			"phyclk_usbhost20_phy_clk48mohci"};
+PNAME(mout_phyclk_usbdrd30_pipe_pclk_user_p) = {"fin_pll",
+			"phyclk_usbdrd30_udrd30_pipe_pclk"};
+PNAME(mout_phyclk_usbdrd30_phyclock_user_p) = {"fin_pll",
+			"phyclk_usbdrd30_udrd30_phyclock"};
+
+struct samsung_mux_clock fsys_mux_clks[] __initdata = {
+	MUX(FSYS_MOUT_PHYCLK_USBDRD30_PHYCLOCK_USER,
+			"mout_phyclk_usbdrd30_phyclock_user",
+			mout_phyclk_usbdrd30_phyclock_user_p,
+			MUX_SEL_FSYS1, 0, 1),
+	MUX(FSYS_MOUT_PHYCLK_USBDRD30_PIPE_PCLK_USER,
+			"mout_phyclk_usbdrd30_pipe_pclk_user",
+			mout_phyclk_usbdrd30_pipe_pclk_user_p,
+			MUX_SEL_FSYS1, 4, 1),
+	MUX(FSYS_MOUT_PHYCLK_USBHOST20_CLK48MOHCI_USER,
+			"mout_phyclk_usbhost20_clk48mohci_user",
+			mout_phyclk_usbhost20_clk48mohci_user_p,
+			MUX_SEL_FSYS1, 8, 1),
+	MUX(FSYS_MOUT_PHYCLK_USBHOST20_FREECLK_USER,
+			"mout_phyclk_usbhost20_freeclk_user",
+			mout_phyclk_usbhost20_freeclk_user_p,
+			MUX_SEL_FSYS1, 12, 1),
+	MUX(FSYS_MOUT_PHYCLK_USBHOST20_PHYCLK_USER,
+			"mout_phyclk_usbhost20_phyclk_user",
+			mout_phyclk_usbhost20_phyclk_user_p,
+			MUX_SEL_FSYS1, 16, 1),
+};
+
+struct samsung_gate_clock fsys_gate_clks[] __initdata = {
+	GATE(FSYS_PHYCLK_USBHOST20, "phyclk_usbhost20_phyclock",
+			"mout_phyclk_usbdrd30_phyclock_user",
+			EN_SCLK_FSYS, 1, 0, 0),
+	GATE(FSYS_PHYCLK_USBDRD30, "phyclk_usbdrd30_udrd30_phyclock_g",
+			"mout_phyclk_usbdrd30_phyclock_user",
+			EN_SCLK_FSYS, 7, 0, 0),
+
+	GATE(FSYS_CLK_MMC0, "clk_mmc0", "dout_aclk_fsys_200",
+			EN_IP_FSYS, 6, 0, 0),
+	GATE(FSYS_CLK_MMC1, "clk_mmc1", "dout_aclk_fsys_200",
+			EN_IP_FSYS, 7, 0, 0),
+	GATE(FSYS_CLK_MMC2, "clk_mmc2", "dout_aclk_fsys_200",
+			EN_IP_FSYS, 8, 0, 0),
+	GATE(FSYS_CLK_PDMA, "clk_pdma", "dout_aclk_fsys_200",
+			EN_IP_FSYS, 9, 0, 0),
+	GATE(FSYS_CLK_SROMC, "clk_sromc", "dout_aclk_fsys_200",
+			EN_IP_FSYS, 13, 0, 0),
+	GATE(FSYS_CLK_USBDRD30, "clk_usbdrd30", "dout_aclk_fsys_200",
+			EN_IP_FSYS, 14, 0, 0),
+	GATE(FSYS_CLK_USBHOST20, "clk_usbhost20", "dout_aclk_fsys_200",
+			EN_IP_FSYS, 15, 0, 0),
+	GATE(FSYS_CLK_USBLINK, "clk_usblink", "dout_aclk_fsys_200",
+			EN_IP_FSYS, 18, 0, 0),
+	GATE(FSYS_CLK_TSI, "clk_tsi", "dout_aclk_fsys_200",
+			EN_IP_FSYS, 20, 0, 0),
+
+	GATE(FSYS_CLK_RTIC, "clk_rtic", "dout_aclk_fsys_200",
+			EN_IP_FSYS_SECURE_RTIC, 11, 0, 0),
+	GATE(FSYS_CLK_SMMU_RTIC, "clk_smmu_rtic", "dout_aclk_fsys_200",
+			EN_IP_FSYS_SECURE_SMMU_RTIC, 12, 0, 0),
+};
+
+static void __init exynos5260_clk_fsys_init(struct device_node *np)
+{
+	struct exynos5260_cmu_info cmu = {0};
+
+	cmu.mux_clks = fsys_mux_clks;
+	cmu.nr_mux_clks = ARRAY_SIZE(fsys_mux_clks);
+	cmu.gate_clks = fsys_gate_clks;
+	cmu.nr_gate_clks = ARRAY_SIZE(fsys_gate_clks);
+	cmu.nr_clk_ids = FSYS_NR_CLK;
+	cmu.clk_regs = fsys_clk_regs;
+	cmu.nr_clk_regs = ARRAY_SIZE(fsys_clk_regs);
+
+	exynos5260_cmu_register_one(np, &cmu);
+}
+
+CLK_OF_DECLARE(exynos5260_clk_fsys, "samsung,exynos5260-clock-fsys",
+		exynos5260_clk_fsys_init);
+
+
+/* CMU_G2D */
+
+static unsigned long g2d_clk_regs[] __initdata = {
+	MUX_SEL_G2D,
+	MUX_STAT_G2D,
+	DIV_G2D,
+	EN_ACLK_G2D,
+	EN_ACLK_G2D_SECURE_SSS,
+	EN_ACLK_G2D_SECURE_SLIM_SSS,
+	EN_ACLK_G2D_SECURE_SMMU_SLIM_SSS,
+	EN_ACLK_G2D_SECURE_SMMU_SSS,
+	EN_ACLK_G2D_SECURE_SMMU_MDMA,
+	EN_ACLK_G2D_SECURE_SMMU_G2D,
+	EN_PCLK_G2D,
+	EN_PCLK_G2D_SECURE_SMMU_SLIM_SSS,
+	EN_PCLK_G2D_SECURE_SMMU_SSS,
+	EN_PCLK_G2D_SECURE_SMMU_MDMA,
+	EN_PCLK_G2D_SECURE_SMMU_G2D,
+	EN_IP_G2D,
+	EN_IP_G2D_SECURE_SSS,
+	EN_IP_G2D_SECURE_SLIM_SSS,
+	EN_IP_G2D_SECURE_SMMU_SLIM_SSS,
+	EN_IP_G2D_SECURE_SMMU_SSS,
+	EN_IP_G2D_SECURE_SMMU_MDMA,
+	EN_IP_G2D_SECURE_SMMU_G2D,
+};
+
+PNAME(mout_aclk_g2d_333_user_p) = {"fin_pll", "dout_aclk_g2d_333"};
+
+struct samsung_mux_clock g2d_mux_clks[] __initdata = {
+	MUX(G2D_MOUT_ACLK_G2D_333_USER, "mout_aclk_g2d_333_user",
+			mout_aclk_g2d_333_user_p,
+			MUX_SEL_G2D, 0, 1),
+};
+
+struct samsung_div_clock g2d_div_clks[] __initdata = {
+	DIV(G2D_DOUT_PCLK_G2D_83, "dout_pclk_g2d_83", "mout_aclk_g2d_333_user",
+			DIV_G2D, 0, 3),
+};
+
+struct samsung_gate_clock g2d_gate_clks[] __initdata = {
+	GATE(G2D_CLK_G2D, "clk_g2d", "mout_aclk_g2d_333_user",
+			EN_IP_G2D, 4, 0, 0),
+	GATE(G2D_CLK_JPEG, "clk_jpeg", "mout_aclk_g2d_333_user",
+			EN_IP_G2D, 5, 0, 0),
+	GATE(G2D_CLK_MDMA, "clk_mdma", "mout_aclk_g2d_333_user",
+			EN_IP_G2D, 6, 0, 0),
+	GATE(G2D_CLK_SMMU3_JPEG, "clk_smmu3_jpeg", "mout_aclk_g2d_333_user",
+			EN_IP_G2D, 16, 0, 0),
+
+	GATE(G2D_CLK_SSS, "clk_sss", "mout_aclk_g2d_333_user",
+			EN_IP_G2D_SECURE_SSS, 17, 0, 0),
+
+	GATE(G2D_CLK_SLIM_SSS, "clk_slim_sss", "mout_aclk_g2d_333_user",
+			EN_IP_G2D_SECURE_SLIM_SSS, 11, 0, 0),
+
+	GATE(G2D_CLK_SMMU_SLIM_SSS, "clk_smmu_slim_sss",
+			"mout_aclk_g2d_333_user",
+			EN_IP_G2D_SECURE_SMMU_SLIM_SSS, 13, 0, 0),
+
+	GATE(G2D_CLK_SMMU_SSS, "clk_smmu_sss", "mout_aclk_g2d_333_user",
+			EN_IP_G2D_SECURE_SMMU_SSS, 14, 0, 0),
+
+	GATE(G2D_CLK_SMMU_MDMA, "clk_smmu_mdma", "mout_aclk_g2d_333_user",
+			EN_IP_G2D_SECURE_SMMU_MDMA, 12, 0, 0),
+
+	GATE(G2D_CLK_SMMU3_G2D, "clk_smmu3_g2d", "mout_aclk_g2d_333_user",
+			EN_IP_G2D_SECURE_SMMU_G2D, 15, 0, 0),
+};
+
+static void __init exynos5260_clk_g2d_init(struct device_node *np)
+{
+	struct exynos5260_cmu_info cmu = {0};
+
+	cmu.mux_clks = g2d_mux_clks;
+	cmu.nr_mux_clks = ARRAY_SIZE(g2d_mux_clks);
+	cmu.div_clks = g2d_div_clks;
+	cmu.nr_div_clks = ARRAY_SIZE(g2d_div_clks);
+	cmu.gate_clks = g2d_gate_clks;
+	cmu.nr_gate_clks = ARRAY_SIZE(g2d_gate_clks);
+	cmu.nr_clk_ids = G2D_NR_CLK;
+	cmu.clk_regs = g2d_clk_regs;
+	cmu.nr_clk_regs = ARRAY_SIZE(g2d_clk_regs);
+
+	exynos5260_cmu_register_one(np, &cmu);
+}
+
+CLK_OF_DECLARE(exynos5260_clk_g2d, "samsung,exynos5260-clock-g2d",
+		exynos5260_clk_g2d_init);
+
+
+/* CMU_G3D */
+
+static unsigned long g3d_clk_regs[] __initdata = {
+	G3D_PLL_LOCK,
+	G3D_PLL_CON0,
+	G3D_PLL_CON1,
+	G3D_PLL_FDET,
+	MUX_SEL_G3D,
+	DIV_G3D,
+	DIV_G3D_PLL_FDET,
+	EN_ACLK_G3D,
+	EN_PCLK_G3D,
+	EN_SCLK_G3D,
+	EN_IP_G3D,
+};
+
+PNAME(mout_g3d_pll_p) = {"fin_pll", "fout_g3d_pll"};
+
+struct samsung_mux_clock g3d_mux_clks[] __initdata = {
+	MUX(G3D_MOUT_G3D_PLL, "mout_g3d_pll", mout_g3d_pll_p,
+			MUX_SEL_G3D, 0, 1),
+};
+
+struct samsung_div_clock g3d_div_clks[] __initdata = {
+	DIV(G3D_DOUT_PCLK_G3D, "dout_pclk_g3d", "dout_aclk_g3d", DIV_G3D, 0, 3),
+	DIV(G3D_DOUT_ACLK_G3D, "dout_aclk_g3d", "mout_g3d_pll", DIV_G3D, 4, 3),
+};
+
+struct samsung_gate_clock g3d_gate_clks[] __initdata = {
+	GATE(G3D_CLK_G3D, "clk_g3d", "dout_aclk_g3d", EN_IP_G3D, 2, 0, 0),
+	GATE(G3D_CLK_G3D_HPM, "clk_g3d_hpm", "dout_aclk_g3d",
+			EN_IP_G3D, 3, 0, 0),
+};
+
+static struct samsung_pll_clock g3d_pll_clks[] __initdata = {
+	PLL(pll_2550, G3D_FOUT_G3D_PLL, "fout_g3d_pll", "fin_pll",
+		G3D_PLL_LOCK, G3D_PLL_CON0,
+		pll2550_24mhz_tbl),
+};
+
+static void __init exynos5260_clk_g3d_init(struct device_node *np)
+{
+	struct exynos5260_cmu_info cmu = {0};
+
+	cmu.pll_clks = g3d_pll_clks;
+	cmu.nr_pll_clks =  ARRAY_SIZE(g3d_pll_clks);
+	cmu.mux_clks = g3d_mux_clks;
+	cmu.nr_mux_clks = ARRAY_SIZE(g3d_mux_clks);
+	cmu.div_clks = g3d_div_clks;
+	cmu.nr_div_clks = ARRAY_SIZE(g3d_div_clks);
+	cmu.gate_clks = g3d_gate_clks;
+	cmu.nr_gate_clks = ARRAY_SIZE(g3d_gate_clks);
+	cmu.nr_clk_ids = G3D_NR_CLK;
+	cmu.clk_regs = g3d_clk_regs;
+	cmu.nr_clk_regs = ARRAY_SIZE(g3d_clk_regs);
+
+	exynos5260_cmu_register_one(np, &cmu);
+}
+
+CLK_OF_DECLARE(exynos5260_clk_g3d, "samsung,exynos5260-clock-g3d",
+		exynos5260_clk_g3d_init);
+
+
+/* CMU_GSCL */
+
+static unsigned long gscl_clk_regs[] __initdata = {
+	MUX_SEL_GSCL,
+	DIV_GSCL,
+	EN_ACLK_GSCL,
+	EN_ACLK_GSCL_FIMC,
+	EN_ACLK_GSCL_SECURE_SMMU_GSCL0,
+	EN_ACLK_GSCL_SECURE_SMMU_GSCL1,
+	EN_ACLK_GSCL_SECURE_SMMU_MSCL0,
+	EN_ACLK_GSCL_SECURE_SMMU_MSCL1,
+	EN_PCLK_GSCL,
+	EN_PCLK_GSCL_FIMC,
+	EN_PCLK_GSCL_SECURE_SMMU_GSCL0,
+	EN_PCLK_GSCL_SECURE_SMMU_GSCL1,
+	EN_PCLK_GSCL_SECURE_SMMU_MSCL0,
+	EN_PCLK_GSCL_SECURE_SMMU_MSCL1,
+	EN_SCLK_GSCL,
+	EN_SCLK_GSCL_FIMC,
+	EN_IP_GSCL,
+	EN_IP_GSCL_FIMC,
+	EN_IP_GSCL_SECURE_SMMU_GSCL0,
+	EN_IP_GSCL_SECURE_SMMU_GSCL1,
+	EN_IP_GSCL_SECURE_SMMU_MSCL0,
+	EN_IP_GSCL_SECURE_SMMU_MSCL1,
+};
+
+PNAME(mout_aclk_gscl_333_user_p) = {"fin_pll", "dout_aclk_gscl_333"};
+PNAME(mout_aclk_m2m_400_user_p) = {"fin_pll", "dout_aclk_gscl_400"};
+PNAME(mout_aclk_gscl_fimc_user_p) = {"fin_pll", "dout_aclk_gscl_400"};
+PNAME(mout_aclk_csis_p) = {"dout_aclk_csis_200", "mout_aclk_gscl_fimc_user"};
+
+struct samsung_mux_clock gscl_mux_clks[] __initdata = {
+	MUX(GSCL_MOUT_ACLK_GSCL_333_USER, "mout_aclk_gscl_333_user",
+			mout_aclk_gscl_333_user_p,
+			MUX_SEL_GSCL, 0, 1),
+	MUX(GSCL_MOUT_ACLK_M2M_400_USER, "mout_aclk_m2m_400_user",
+			mout_aclk_m2m_400_user_p,
+			MUX_SEL_GSCL, 4, 1),
+	MUX(GSCL_MOUT_ACLK_GSCL_FIMC_USER, "mout_aclk_gscl_fimc_user",
+			mout_aclk_gscl_fimc_user_p,
+			MUX_SEL_GSCL, 8, 1),
+	MUX(GSCL_MOUT_ACLK_CSIS, "mout_aclk_csis", mout_aclk_csis_p,
+			MUX_SEL_GSCL, 24, 1),
+};
+
+struct samsung_div_clock gscl_div_clks[] __initdata = {
+	DIV(GSCL_DOUT_PCLK_M2M_100, "dout_pclk_m2m_100",
+			"mout_aclk_m2m_400_user",
+			DIV_GSCL, 0, 3),
+	DIV(GSCL_DOUT_ACLK_CSIS_200, "dout_aclk_csis_200",
+			"mout_aclk_m2m_400_user",
+			DIV_GSCL, 4, 3),
+};
+
+struct samsung_gate_clock gscl_gate_clks[] __initdata = {
+	GATE(GSCL_SCLK_CSIS0_WRAP, "sclk_csis0_wrap", "dout_aclk_csis_200",
+			EN_SCLK_GSCL_FIMC, 0, CLK_SET_RATE_PARENT, 0),
+	GATE(GSCL_SCLK_CSIS1_WRAP, "sclk_csis1_wrap", "dout_aclk_csis_200",
+			EN_SCLK_GSCL_FIMC, 1, CLK_SET_RATE_PARENT, 0),
+
+	GATE(GSCL_CLK_GSCL0, "clk_gscl0", "mout_aclk_gscl_333_user",
+			EN_IP_GSCL, 2, 0, 0),
+	GATE(GSCL_CLK_GSCL1, "clk_gscl1", "mout_aclk_gscl_333_user",
+			EN_IP_GSCL, 3, 0, 0),
+	GATE(GSCL_CLK_MSCL0, "clk_mscl0", "mout_aclk_gscl_333_user",
+			EN_IP_GSCL, 4, 0, 0),
+	GATE(GSCL_CLK_MSCL1, "clk_mscl1", "mout_aclk_gscl_333_user",
+			EN_IP_GSCL, 5, 0, 0),
+	GATE(GSCL_CLK_PIXEL_GSCL0, "clk_pixel_gscl0",
+			"mout_aclk_gscl_333_user",
+			EN_IP_GSCL, 8, 0, 0),
+	GATE(GSCL_CLK_PIXEL_GSCL1, "clk_pixel_gscl1",
+			"mout_aclk_gscl_333_user",
+			EN_IP_GSCL, 9, 0, 0),
+
+	GATE(GSCL_CLK_SMMU3_LITE_A, "clk_smmu3_lite_a",
+			"mout_aclk_gscl_fimc_user",
+			EN_IP_GSCL_FIMC, 5, 0, 0),
+	GATE(GSCL_CLK_SMMU3_LITE_B, "clk_smmu3_lite_b",
+			"mout_aclk_gscl_fimc_user",
+			EN_IP_GSCL_FIMC, 6, 0, 0),
+	GATE(GSCL_CLK_SMMU3_LITE_D, "clk_smmu3_lite_d",
+			"mout_aclk_gscl_fimc_user",
+			EN_IP_GSCL_FIMC, 7, 0, 0),
+	GATE(GSCL_CLK_CSIS0, "clk_csis0", "mout_aclk_gscl_fimc_user",
+			EN_IP_GSCL_FIMC, 8, 0, 0),
+	GATE(GSCL_CLK_CSIS1, "clk_csis1", "mout_aclk_gscl_fimc_user",
+			EN_IP_GSCL_FIMC, 9, 0, 0),
+	GATE(GSCL_CLK_FIMC_LITE_A, "clk_fimc_lite_a",
+			"mout_aclk_gscl_fimc_user",
+			EN_IP_GSCL_FIMC, 10, 0, 0),
+	GATE(GSCL_CLK_FIMC_LITE_B, "clk_fimc_lite_b",
+			"mout_aclk_gscl_fimc_user",
+			EN_IP_GSCL_FIMC, 11, 0, 0),
+	GATE(GSCL_CLK_FIMC_LITE_D, "clk_fimc_lite_d",
+			"mout_aclk_gscl_fimc_user",
+			EN_IP_GSCL_FIMC, 12, 0, 0),
+
+	GATE(GSCL_CLK_SMMU3_GSCL0, "clk_smmu3_gscl0",
+			"mout_aclk_gscl_333_user",
+			EN_IP_GSCL_SECURE_SMMU_GSCL0, 17, 0, 0),
+	GATE(GSCL_CLK_SMMU3_GSCL1, "clk_smmu3_gscl1", "mout_aclk_gscl_333_user",
+			EN_IP_GSCL_SECURE_SMMU_GSCL1, 18, 0, 0),
+	GATE(GSCL_CLK_SMMU3_MSCL0, "clk_smmu3_mscl0",
+			"mout_aclk_m2m_400_user",
+			EN_IP_GSCL_SECURE_SMMU_MSCL0, 19, 0, 0),
+	GATE(GSCL_CLK_SMMU3_MSCL1, "clk_smmu3_mscl1",
+			"mout_aclk_m2m_400_user",
+			EN_IP_GSCL_SECURE_SMMU_MSCL1, 20, 0, 0),
+};
+
+static void __init exynos5260_clk_gscl_init(struct device_node *np)
+{
+	struct exynos5260_cmu_info cmu = {0};
+
+	cmu.mux_clks = gscl_mux_clks;
+	cmu.nr_mux_clks = ARRAY_SIZE(gscl_mux_clks);
+	cmu.div_clks = gscl_div_clks;
+	cmu.nr_div_clks = ARRAY_SIZE(gscl_div_clks);
+	cmu.gate_clks = gscl_gate_clks;
+	cmu.nr_gate_clks = ARRAY_SIZE(gscl_gate_clks);
+	cmu.nr_clk_ids = GSCL_NR_CLK;
+	cmu.clk_regs = gscl_clk_regs;
+	cmu.nr_clk_regs = ARRAY_SIZE(gscl_clk_regs);
+
+	exynos5260_cmu_register_one(np, &cmu);
+}
+
+CLK_OF_DECLARE(exynos5260_clk_gscl, "samsung,exynos5260-clock-gscl",
+		exynos5260_clk_gscl_init);
+
+
+/* CMU_ISP */
+
+static unsigned long isp_clk_regs[] __initdata = {
+	MUX_SEL_ISP0,
+	MUX_SEL_ISP1,
+	DIV_ISP,
+	EN_ACLK_ISP0,
+	EN_ACLK_ISP1,
+	EN_PCLK_ISP0,
+	EN_PCLK_ISP1,
+	EN_SCLK_ISP,
+	EN_IP_ISP0,
+	EN_IP_ISP1,
+};
+
+PNAME(mout_isp_400_user_p) = {"fin_pll", "dout_aclk_isp1_400"};
+PNAME(mout_isp_266_user_p)	 = {"fin_pll", "dout_aclk_isp1_266"};
+
+struct samsung_mux_clock isp_mux_clks[] __initdata = {
+	MUX(ISP_MOUT_ISP_266_USER, "mout_isp_266_user", mout_isp_266_user_p,
+			MUX_SEL_ISP0, 0, 1),
+	MUX(ISP_MOUT_ISP_400_USER, "mout_isp_400_user", mout_isp_400_user_p,
+			MUX_SEL_ISP0, 4, 1),
+};
+
+struct samsung_div_clock isp_div_clks[] __initdata = {
+	DIV(ISP_DOUT_PCLK_ISP_66, "dout_pclk_isp_66", "mout_kfc",
+			DIV_ISP, 0, 3),
+	DIV(ISP_DOUT_PCLK_ISP_133, "dout_pclk_isp_133", "mout_kfc",
+			DIV_ISP, 4, 4),
+	DIV(ISP_DOUT_CA5_ATCLKIN, "dout_ca5_atclkin", "mout_kfc",
+			DIV_ISP, 12, 3),
+	DIV(ISP_DOUT_CA5_PCLKDBG, "dout_ca5_pclkdbg", "mout_kfc",
+			DIV_ISP, 16, 4),
+	DIV(ISP_DOUT_SCLK_MPWM, "dout_sclk_mpwm", "mout_kfc", DIV_ISP, 20, 2),
+};
+
+struct samsung_gate_clock isp_gate_clks[] __initdata = {
+	GATE(ISP_CLK_GIC, "clk_isp_gic", "mout_aclk_isp1_266",
+			EN_IP_ISP0, 15, 0, 0),
+
+	GATE(ISP_CLK_CA5, "clk_isp_ca5", "mout_aclk_isp1_266",
+			EN_IP_ISP1, 1, 0, 0),
+	GATE(ISP_CLK_FIMC_DRC, "clk_isp_fimc_drc", "mout_aclk_isp1_266",
+			EN_IP_ISP1, 2, 0, 0),
+	GATE(ISP_CLK_FIMC_FD, "clk_isp_fimc_fd", "mout_aclk_isp1_266",
+			EN_IP_ISP1, 3, 0, 0),
+	GATE(ISP_CLK_FIMC, "clk_isp_fimc", "mout_aclk_isp1_266",
+			EN_IP_ISP1, 4, 0, 0),
+	GATE(ISP_CLK_FIMC_SCALERC, "clk_isp_fimc_scalerc",
+			"mout_aclk_isp1_266",
+			EN_IP_ISP1, 5, 0, 0),
+	GATE(ISP_CLK_FIMC_SCALERP, "clk_isp_fimc_scalerp",
+			"mout_aclk_isp1_266",
+			EN_IP_ISP1, 6, 0, 0),
+	GATE(ISP_CLK_I2C0, "clk_isp_i2c0", "mout_aclk_isp1_266",
+			EN_IP_ISP1, 7, 0, 0),
+	GATE(ISP_CLK_I2C1, "clk_isp_i2c1", "mout_aclk_isp1_266",
+			EN_IP_ISP1, 8, 0, 0),
+	GATE(ISP_CLK_MCUCTL, "clk_isp_mcuctl", "mout_aclk_isp1_266",
+			EN_IP_ISP1, 9, 0, 0),
+	GATE(ISP_CLK_MPWM, "clk_isp_mpwm", "mout_aclk_isp1_266",
+			EN_IP_ISP1, 10, 0, 0),
+	GATE(ISP_CLK_MTCADC, "clk_isp_mtcadc", "mout_aclk_isp1_266",
+			EN_IP_ISP1, 11, 0, 0),
+	GATE(ISP_CLK_PWM, "clk_isp_pwm", "mout_aclk_isp1_266",
+			EN_IP_ISP1, 14, 0, 0),
+	GATE(ISP_CLK_SMMU_DRC, "clk_smmu_drc", "mout_aclk_isp1_266",
+			EN_IP_ISP1, 21, 0, 0),
+	GATE(ISP_CLK_SMMU_FD, "clk_smmu_fd", "mout_aclk_isp1_266",
+			EN_IP_ISP1, 22, 0, 0),
+	GATE(ISP_CLK_SMMU_ISP, "clk_smmu_isp", "mout_aclk_isp1_266",
+			EN_IP_ISP1, 23, 0, 0),
+	GATE(ISP_CLK_SMMU_ISPCX, "clk_smmu_ispcx", "mout_aclk_isp1_266",
+			EN_IP_ISP1, 24, 0, 0),
+	GATE(ISP_CLK_SMMU_SCALERC, "clk_isp_smmu_scalerc",
+			"mout_aclk_isp1_266",
+			EN_IP_ISP1, 25, 0, 0),
+	GATE(ISP_CLK_SMMU_SCALERP, "clk_isp_smmu_scalerp",
+			"mout_aclk_isp1_266",
+			EN_IP_ISP1, 26, 0, 0),
+	GATE(ISP_CLK_SPI0, "clk_isp_spi0", "mout_aclk_isp1_266",
+			EN_IP_ISP1, 27, 0, 0),
+	GATE(ISP_CLK_SPI1, "clk_isp_spi1", "mout_aclk_isp1_266",
+			EN_IP_ISP1, 28, 0, 0),
+	GATE(ISP_CLK_WDT, "clk_isp_wdt", "mout_aclk_isp1_266",
+			EN_IP_ISP1, 31, 0, 0),
+	GATE(ISP_CLK_UART, "clk_isp_uart", "mout_aclk_isp1_266",
+			EN_IP_ISP1, 30, 0, 0),
+
+	GATE(ISP_SCLK_UART_EXT, "sclk_isp_uart_ext", "fin_pll",
+			EN_SCLK_ISP, 7, CLK_SET_RATE_PARENT, 0),
+	GATE(ISP_SCLK_SPI1_EXT, "sclk_isp_spi1_ext", "fin_pll",
+			EN_SCLK_ISP, 8, CLK_SET_RATE_PARENT, 0),
+	GATE(ISP_SCLK_SPI0_EXT, "sclk_isp_spi0_ext", "fin_pll",
+			EN_SCLK_ISP, 9, CLK_SET_RATE_PARENT, 0),
+};
+
+static void __init exynos5260_clk_isp_init(struct device_node *np)
+{
+	struct exynos5260_cmu_info cmu = {0};
+
+	cmu.mux_clks = isp_mux_clks;
+	cmu.nr_mux_clks = ARRAY_SIZE(isp_mux_clks);
+	cmu.div_clks = isp_div_clks;
+	cmu.nr_div_clks = ARRAY_SIZE(isp_div_clks);
+	cmu.gate_clks = isp_gate_clks;
+	cmu.nr_gate_clks = ARRAY_SIZE(isp_gate_clks);
+	cmu.nr_clk_ids = ISP_NR_CLK;
+	cmu.clk_regs = isp_clk_regs;
+	cmu.nr_clk_regs = ARRAY_SIZE(isp_clk_regs);
+
+	exynos5260_cmu_register_one(np, &cmu);
+}
+
+CLK_OF_DECLARE(exynos5260_clk_isp, "samsung,exynos5260-clock-isp",
+		exynos5260_clk_isp_init);
+
+
+/* CMU_KFC */
+
+static unsigned long kfc_clk_regs[] __initdata = {
+	KFC_PLL_LOCK,
+	KFC_PLL_CON0,
+	KFC_PLL_CON1,
+	KFC_PLL_FDET,
+	MUX_SEL_KFC0,
+	MUX_SEL_KFC2,
+	DIV_KFC,
+	DIV_KFC_PLL_FDET,
+	EN_ACLK_KFC,
+	EN_PCLK_KFC,
+	EN_SCLK_KFC,
+	EN_IP_KFC,
+};
+
+PNAME(mout_kfc_pll_p) = {"fin_pll", "fout_kfc_pll"};
+PNAME(mout_kfc_p)	 = {"mout_kfc_pll", "dout_media_pll"};
+
+struct samsung_mux_clock kfc_mux_clks[] __initdata = {
+	MUX(KFC_MOUT_KFC_PLL, "mout_kfc_pll", mout_kfc_pll_p,
+			MUX_SEL_KFC0, 0, 1),
+	MUX(KFC_MOUT_KFC, "mout_kfc", mout_kfc_p, MUX_SEL_KFC2, 0, 1),
+};
+
+struct samsung_div_clock kfc_div_clks[] __initdata = {
+	DIV(KFC_DOUT_KFC1, "dout_kfc1", "mout_kfc", DIV_KFC, 0, 3),
+	DIV(KFC_DOUT_KFC2, "dout_kfc2", "dout_kfc1", DIV_KFC, 4, 3),
+	DIV(KFC_DOUT_KFC_ATCLK, "dout_kfc_atclk", "dout_kfc2", DIV_KFC, 8, 3),
+	DIV(KFC_DOUT_KFC_PCLK_DBG, "dout_kfc_pclk_dbg", "dout_kfc2",
+			DIV_KFC, 12, 3),
+	DIV(KFC_DOUT_ACLK_KFC, "dout_aclk_kfc", "dout_kfc2", DIV_KFC, 16, 3),
+	DIV(KFC_DOUT_PCLK_KFC, "dout_pclk_kfc", "dout_kfc2", DIV_KFC, 20, 3),
+	DIV(KFC_DOUT_KFC_PLL, "dout_kfc_pll", "mout_kfc", DIV_KFC, 24, 3),
+};
+
+static struct samsung_pll_clock kfc_pll_clks[] __initdata = {
+	PLL(pll_2550xx, KFC_FOUT_KFC_PLL, "fout_kfc_pll", "fin_pll",
+		KFC_PLL_LOCK, KFC_PLL_CON0,
+		pll2550_24mhz_tbl),
+};
+
+static void __init exynos5260_clk_kfc_init(struct device_node *np)
+{
+	struct exynos5260_cmu_info cmu = {0};
+
+	cmu.pll_clks = kfc_pll_clks;
+	cmu.nr_pll_clks =  ARRAY_SIZE(kfc_pll_clks);
+	cmu.mux_clks = kfc_mux_clks;
+	cmu.nr_mux_clks = ARRAY_SIZE(kfc_mux_clks);
+	cmu.div_clks = kfc_div_clks;
+	cmu.nr_div_clks = ARRAY_SIZE(kfc_div_clks);
+	cmu.nr_clk_ids = KFC_NR_CLK;
+	cmu.clk_regs = kfc_clk_regs;
+	cmu.nr_clk_regs = ARRAY_SIZE(kfc_clk_regs);
+
+	exynos5260_cmu_register_one(np, &cmu);
+}
+
+CLK_OF_DECLARE(exynos5260_clk_kfc, "samsung,exynos5260-clock-kfc",
+		exynos5260_clk_kfc_init);
+
+
+/* CMU_MFC */
+
+static unsigned long mfc_clk_regs[] __initdata = {
+	MUX_SEL_MFC,
+	DIV_MFC,
+	EN_ACLK_MFC,
+	EN_ACLK_SECURE_SMMU2_MFC,
+	EN_PCLK_MFC,
+	EN_PCLK_SECURE_SMMU2_MFC,
+	EN_IP_MFC,
+	EN_IP_MFC_SECURE_SMMU2_MFC,
+};
+
+PNAME(mout_aclk_mfc_333_user_p) = {"fin_pll", "dout_aclk_mfc_333"};
+
+struct samsung_mux_clock mfc_mux_clks[] __initdata = {
+	MUX(MFC_MOUT_ACLK_MFC_333_USER, "mout_aclk_mfc_333_user",
+			mout_aclk_mfc_333_user_p,
+			MUX_SEL_MFC, 0, 1),
+};
+
+struct samsung_div_clock mfc_div_clks[] __initdata = {
+	DIV(MFC_DOUT_PCLK_MFC_83, "dout_pclk_mfc_83", "mout_aclk_mfc_333_user",
+			DIV_MFC, 0, 3),
+};
+
+struct samsung_gate_clock mfc_gate_clks[] __initdata = {
+	GATE(MFC_CLK_MFC, "clk_mfc", "mout_aclk_mfc_333_user",
+			EN_IP_MFC, 1, 0, 0),
+	GATE(MFC_CLK_SMMU2_MFCM0, "clk_smmu2_mfcm0", "mout_aclk_mfc_333_user",
+			EN_IP_MFC_SECURE_SMMU2_MFC, 6, 0, 0),
+	GATE(MFC_CLK_SMMU2_MFCM1, "clk_smmu2_mfcm1", "mout_aclk_mfc_333_user",
+			EN_IP_MFC_SECURE_SMMU2_MFC, 7, 0, 0),
+};
+
+static void __init exynos5260_clk_mfc_init(struct device_node *np)
+{
+	struct exynos5260_cmu_info cmu = {0};
+
+	cmu.mux_clks = mfc_mux_clks;
+	cmu.nr_mux_clks = ARRAY_SIZE(mfc_mux_clks);
+	cmu.div_clks = mfc_div_clks;
+	cmu.nr_div_clks = ARRAY_SIZE(mfc_div_clks);
+	cmu.gate_clks = mfc_gate_clks;
+	cmu.nr_gate_clks = ARRAY_SIZE(mfc_gate_clks);
+	cmu.nr_clk_ids = MFC_NR_CLK;
+	cmu.clk_regs = mfc_clk_regs;
+	cmu.nr_clk_regs = ARRAY_SIZE(mfc_clk_regs);
+
+	exynos5260_cmu_register_one(np, &cmu);
+}
+
+CLK_OF_DECLARE(exynos5260_clk_mfc, "samsung,exynos5260-clock-mfc",
+		exynos5260_clk_mfc_init);
+
+
+/* CMU_MIF */
+
+static unsigned long mif_clk_regs[] __initdata = {
+	MEM_PLL_LOCK,
+	BUS_PLL_LOCK,
+	MEDIA_PLL_LOCK,
+	MEM_PLL_CON0,
+	MEM_PLL_CON1,
+	MEM_PLL_FDET,
+	BUS_PLL_CON0,
+	BUS_PLL_CON1,
+	BUS_PLL_FDET,
+	MEDIA_PLL_CON0,
+	MEDIA_PLL_CON1,
+	MEDIA_PLL_FDET,
+	MUX_SEL_MIF,
+	DIV_MIF,
+	DIV_MIF_PLL_FDET,
+	EN_ACLK_MIF,
+	EN_ACLK_MIF_SECURE_DREX1_TZ,
+	EN_ACLK_MIF_SECURE_DREX0_TZ,
+	EN_ACLK_MIF_SECURE_INTMEM,
+	EN_PCLK_MIF,
+	EN_PCLK_MIF_SECURE_MONOCNT,
+	EN_PCLK_MIF_SECURE_RTC_APBIF,
+	EN_PCLK_MIF_SECURE_DREX1_TZ,
+	EN_PCLK_MIF_SECURE_DREX0_TZ,
+	EN_SCLK_MIF,
+	EN_IP_MIF,
+	EN_IP_MIF_SECURE_MONOCNT,
+	EN_IP_MIF_SECURE_RTC_APBIF,
+	EN_IP_MIF_SECURE_DREX1_TZ,
+	EN_IP_MIF_SECURE_DREX0_TZ,
+	EN_IP_MIF_SECURE_INTEMEM,
+};
+
+PNAME(mout_mem_pll_p) = {"fin_pll", "fout_mem_pll"};
+PNAME(mout_bus_pll_p) = {"fin_pll", "fout_bus_pll"};
+PNAME(mout_media_pll_p) = {"fin_pll", "fout_media_pll"};
+PNAME(mout_mif_drex_p) = {"dout_mem_pll", "dout_bus_pll"};
+PNAME(mout_mif_drex2x_p) = {"dout_mem_pll", "dout_bus_pll"};
+PNAME(mout_clkm_phy_p) = {"mout_mif_drex", "dout_media_pll"};
+PNAME(mout_clk2x_phy_p) = {"mout_mif_drex2x", "dout_media_pll"};
+
+struct samsung_mux_clock mif_mux_clks[] __initdata = {
+	MUX(MIF_MOUT_MEM_PLL, "mout_mem_pll", mout_mem_pll_p,
+			MUX_SEL_MIF, 0, 1),
+	MUX(MIF_MOUT_BUS_PLL, "mout_bus_pll", mout_bus_pll_p,
+			MUX_SEL_MIF, 4, 1),
+	MUX(MIF_MOUT_MEDIA_PLL, "mout_media_pll", mout_media_pll_p,
+			MUX_SEL_MIF, 8, 1),
+	MUX(MIF_MOUT_MIF_DREX, "mout_mif_drex", mout_mif_drex_p,
+			MUX_SEL_MIF, 12, 1),
+	MUX(MIF_MOUT_CLKM_PHY, "mout_clkm_phy", mout_clkm_phy_p,
+			MUX_SEL_MIF, 16, 1),
+	MUX(MIF_MOUT_MIF_DREX2X, "mout_mif_drex2x", mout_mif_drex2x_p,
+			MUX_SEL_MIF, 20, 1),
+	MUX(MIF_MOUT_CLK2X_PHY, "mout_clk2x_phy", mout_clk2x_phy_p,
+			MUX_SEL_MIF, 24, 1),
+};
+
+struct samsung_div_clock mif_div_clks[] __initdata = {
+	DIV(MIF_DOUT_MEDIA_PLL, "dout_media_pll", "mout_media_pll",
+			DIV_MIF, 0, 3),
+	DIV(MIF_DOUT_MEM_PLL, "dout_mem_pll", "mout_mem_pll",
+			DIV_MIF, 4, 3),
+	DIV(MIF_DOUT_BUS_PLL, "dout_bus_pll", "mout_bus_pll",
+			DIV_MIF, 8, 3),
+	DIV(MIF_DOUT_CLKM_PHY, "dout_clkm_phy", "mout_clkm_phy",
+			DIV_MIF, 12, 3),
+	DIV(MIF_DOUT_CLK2X_PHY, "dout_clk2x_phy", "mout_clk2x_phy",
+			DIV_MIF, 16, 4),
+	DIV(MIF_DOUT_ACLK_MIF_466, "dout_aclk_mif_466", "dout_clk2x_phy",
+			DIV_MIF, 20, 3),
+	DIV(MIF_DOUT_ACLK_BUS_200, "dout_aclk_bus_200", "dout_bus_pll",
+			DIV_MIF, 24, 3),
+	DIV(MIF_DOUT_ACLK_BUS_100, "dout_aclk_bus_100", "dout_bus_pll",
+			DIV_MIF, 28, 4),
+};
+
+struct samsung_gate_clock mif_gate_clks[] __initdata = {
+	GATE(MIF_CLK_LPDDR3PHY_WRAP0, "clk_lpddr3phy_wrap0", "dout_clk2x_phy",
+			EN_IP_MIF, 12, CLK_IGNORE_UNUSED, 0),
+	GATE(MIF_CLK_LPDDR3PHY_WRAP1, "clk_lpddr3phy_wrap1", "dout_clk2x_phy",
+			EN_IP_MIF, 13, CLK_IGNORE_UNUSED, 0),
+
+	GATE(MIF_CLK_MONOCNT, "clk_monocnt", "dout_aclk_bus_100",
+			EN_IP_MIF_SECURE_MONOCNT, 22,
+			CLK_IGNORE_UNUSED, 0),
+
+	GATE(MIF_CLK_MIF_RTC, "clk_mif_rtc", "dout_aclk_bus_100",
+			EN_IP_MIF_SECURE_RTC_APBIF, 23,
+			CLK_IGNORE_UNUSED, 0),
+
+	GATE(MIF_CLK_DREX1, "clk_drex1", "dout_aclk_mif_466",
+			EN_IP_MIF_SECURE_DREX1_TZ, 9,
+			CLK_IGNORE_UNUSED, 0),
+
+	GATE(MIF_CLK_DREX0, "clk_drex0", "dout_aclk_mif_466",
+			EN_IP_MIF_SECURE_DREX0_TZ, 9,
+			CLK_IGNORE_UNUSED, 0),
+
+	GATE(MIF_CLK_INTMEM, "clk_intmem", "dout_aclk_bus_200",
+			EN_IP_MIF_SECURE_INTEMEM, 11,
+			CLK_IGNORE_UNUSED, 0),
+
+	GATE(MIF_SCLK_LPDDR3PHY_WRAP_U0, "sclk_lpddr3phy_wrap_u0",
+			"dout_clkm_phy", EN_SCLK_MIF, 0,
+			CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0),
+	GATE(MIF_SCLK_LPDDR3PHY_WRAP_U1, "sclk_lpddr3phy_wrap_u1",
+			"dout_clkm_phy", EN_SCLK_MIF, 1,
+			CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0),
+};
+
+static struct samsung_pll_clock mif_pll_clks[] __initdata = {
+	PLL(pll_2550xx, MIF_FOUT_MEM_PLL, "fout_mem_pll", "fin_pll",
+		MEM_PLL_LOCK, MEM_PLL_CON0,
+		pll2550_24mhz_tbl),
+	PLL(pll_2550xx, MIF_FOUT_BUS_PLL, "fout_bus_pll", "fin_pll",
+		BUS_PLL_LOCK, BUS_PLL_CON0,
+		pll2550_24mhz_tbl),
+	PLL(pll_2550xx, MIF_FOUT_MEDIA_PLL, "fout_media_pll", "fin_pll",
+		MEDIA_PLL_LOCK, MEDIA_PLL_CON0,
+		pll2550_24mhz_tbl),
+};
+
+static void __init exynos5260_clk_mif_init(struct device_node *np)
+{
+	struct exynos5260_cmu_info cmu = {0};
+
+	cmu.pll_clks = mif_pll_clks;
+	cmu.nr_pll_clks =  ARRAY_SIZE(mif_pll_clks);
+	cmu.mux_clks = mif_mux_clks;
+	cmu.nr_mux_clks = ARRAY_SIZE(mif_mux_clks);
+	cmu.div_clks = mif_div_clks;
+	cmu.nr_div_clks = ARRAY_SIZE(mif_div_clks);
+	cmu.gate_clks = mif_gate_clks;
+	cmu.nr_gate_clks = ARRAY_SIZE(mif_gate_clks);
+	cmu.nr_clk_ids = MIF_NR_CLK;
+	cmu.clk_regs = mif_clk_regs;
+	cmu.nr_clk_regs = ARRAY_SIZE(mif_clk_regs);
+
+	exynos5260_cmu_register_one(np, &cmu);
+}
+
+CLK_OF_DECLARE(exynos5260_clk_mif, "samsung,exynos5260-clock-mif",
+		exynos5260_clk_mif_init);
+
+
+/* CMU_PERI */
+
+static unsigned long peri_clk_regs[] __initdata = {
+	MUX_SEL_PERI,
+	MUX_SEL_PERI1,
+	DIV_PERI,
+	EN_PCLK_PERI0,
+	EN_PCLK_PERI1,
+	EN_PCLK_PERI2,
+	EN_PCLK_PERI3,
+	EN_PCLK_PERI_SECURE_CHIPID,
+	EN_PCLK_PERI_SECURE_PROVKEY0,
+	EN_PCLK_PERI_SECURE_PROVKEY1,
+	EN_PCLK_PERI_SECURE_SECKEY,
+	EN_PCLK_PERI_SECURE_ANTIRBKCNT,
+	EN_PCLK_PERI_SECURE_TOP_RTC,
+	EN_PCLK_PERI_SECURE_TZPC,
+	EN_SCLK_PERI,
+	EN_SCLK_PERI_SECURE_TOP_RTC,
+	EN_IP_PERI0,
+	EN_IP_PERI1,
+	EN_IP_PERI2,
+	EN_IP_PERI_SECURE_CHIPID,
+	EN_IP_PERI_SECURE_PROVKEY0,
+	EN_IP_PERI_SECURE_PROVKEY1,
+	EN_IP_PERI_SECURE_SECKEY,
+	EN_IP_PERI_SECURE_ANTIRBKCNT,
+	EN_IP_PERI_SECURE_TOP_RTC,
+	EN_IP_PERI_SECURE_TZPC,
+};
+
+PNAME(mout_sclk_pcm_p) = {"ioclk_pcm_extclk", "fin_pll", "dout_aclk_peri_aud",
+			"phyclk_hdmi_phy_ref_cko"};
+PNAME(mout_sclk_i2scod_p) = {"ioclk_i2s_cdclk", "fin_pll", "dout_aclk_peri_aud",
+			"phyclk_hdmi_phy_ref_cko"};
+PNAME(mout_sclk_spdif_p) = {"ioclk_spdif_extclk", "fin_pll",
+			"dout_aclk_peri_aud", "phyclk_hdmi_phy_ref_cko"};
+
+struct samsung_mux_clock peri_mux_clks[] __initdata = {
+	MUX(PERI_MOUT_SCLK_PCM, "mout_sclk_pcm", mout_sclk_pcm_p,
+			MUX_SEL_PERI1, 4, 2),
+	MUX(PERI_MOUT_SCLK_I2SCOD, "mout_sclk_i2scod", mout_sclk_i2scod_p,
+			MUX_SEL_PERI1, 12, 2),
+	MUX(PERI_MOUT_SCLK_SPDIF, "mout_sclk_spdif", mout_sclk_spdif_p,
+			MUX_SEL_PERI1, 20, 2),
+};
+
+struct samsung_div_clock peri_div_clks[] __initdata = {
+	DIV(PERI_DOUT_PCM, "dout_pcm", "mout_sclk_pcm", DIV_PERI, 0, 8),
+	DIV(PERI_DOUT_I2S, "dout_i2s", "mout_sclk_i2scod", DIV_PERI, 8, 6),
+};
+
+struct samsung_gate_clock peri_gate_clks[] __initdata = {
+	GATE(PERI_SCLK_PCM1, "sclk_pcm1", "dout_pcm", EN_SCLK_PERI, 0,
+			CLK_SET_RATE_PARENT, 0),
+	GATE(PERI_SCLK_I2S, "sclk_i2s", "dout_i2s", EN_SCLK_PERI, 1,
+			CLK_SET_RATE_PARENT, 0),
+	GATE(PERI_SCLK_SPDIF, "sclk_spdif", "dout_sclk_peri_spi0_b",
+			EN_SCLK_PERI, 2, CLK_SET_RATE_PARENT, 0),
+	GATE(PERI_SCLK_SPI0, "sclk_spi0", "dout_sclk_peri_spi0_b",
+			EN_SCLK_PERI, 7, CLK_SET_RATE_PARENT, 0),
+	GATE(PERI_SCLK_SPI1, "sclk_spi1", "dout_sclk_peri_spi1_b",
+			EN_SCLK_PERI, 8, CLK_SET_RATE_PARENT, 0),
+	GATE(PERI_SCLK_SPI2, "sclk_spi2", "dout_sclk_peri_spi2_b",
+			EN_SCLK_PERI, 9, CLK_SET_RATE_PARENT, 0),
+	GATE(PERI_SCLK_UART0, "sclk_uart0", "dout_sclk_peri_uart0",
+			EN_SCLK_PERI, 10, CLK_SET_RATE_PARENT, 0),
+	GATE(PERI_SCLK_UART1, "sclk_uart1", "dout_sclk_peri_uart1",
+			EN_SCLK_PERI, 11, CLK_SET_RATE_PARENT, 0),
+	GATE(PERI_SCLK_UART2, "sclk_uart2", "dout_sclk_peri_uart2",
+			EN_SCLK_PERI, 12, CLK_SET_RATE_PARENT, 0),
+
+	GATE(PERI_CLK_ABB, "clk_abb", "dout_aclk_peri_66",
+		EN_IP_PERI0, 1, 0, 0),
+	GATE(PERI_CLK_EFUSE_WRITER, "clk_efuse_writer", "dout_aclk_peri_66",
+		EN_IP_PERI0, 5, 0, 0),
+	GATE(PERI_CLK_HDMICEC, "clk_hdmicec", "dout_aclk_peri_66",
+		EN_IP_PERI0, 6, 0, 0),
+	GATE(PERI_CLK_I2C10, "clk_i2c10", "dout_aclk_peri_66",
+		EN_IP_PERI0, 7, 0, 0),
+	GATE(PERI_CLK_I2C11, "clk_i2c11", "dout_aclk_peri_66",
+		EN_IP_PERI0, 8, 0, 0),
+	GATE(PERI_CLK_I2C8, "clk_i2c8", "dout_aclk_peri_66",
+		EN_IP_PERI0, 9, 0, 0),
+	GATE(PERI_CLK_I2C9, "clk_i2c9", "dout_aclk_peri_66",
+		EN_IP_PERI0, 10, 0, 0),
+	GATE(PERI_CLK_I2C4, "clk_i2c4", "dout_aclk_peri_66",
+		EN_IP_PERI0, 11, 0, 0),
+	GATE(PERI_CLK_I2C5, "clk_i2c5", "dout_aclk_peri_66",
+		EN_IP_PERI0, 12, 0, 0),
+	GATE(PERI_CLK_I2C6, "clk_i2c6", "dout_aclk_peri_66",
+		EN_IP_PERI0, 13, 0, 0),
+	GATE(PERI_CLK_I2C7, "clk_i2c7", "dout_aclk_peri_66",
+		EN_IP_PERI0, 14, 0, 0),
+	GATE(PERI_CLK_I2CHDMI, "clk_i2chdmi", "dout_aclk_peri_66",
+		EN_IP_PERI0, 15, 0, 0),
+	GATE(PERI_CLK_I2S, "clk_peri_i2s", "dout_aclk_peri_66",
+		EN_IP_PERI0, 16, 0, 0),
+	GATE(PERI_CLK_MCT, "clk_mct", "dout_aclk_peri_66",
+		EN_IP_PERI0, 17, 0, 0),
+	GATE(PERI_CLK_PCM, "clk_peri_pcm", "dout_aclk_peri_66",
+		EN_IP_PERI0, 18, 0, 0),
+	GATE(PERI_CLK_HSIC0, "clk_hsic0", "dout_aclk_peri_66",
+		EN_IP_PERI0, 20, 0, 0),
+	GATE(PERI_CLK_HSIC1, "clk_hsic1", "dout_aclk_peri_66",
+		EN_IP_PERI0, 21, 0, 0),
+	GATE(PERI_CLK_HSIC2, "clk_hsic2", "dout_aclk_peri_66",
+		EN_IP_PERI0, 22, 0, 0),
+	GATE(PERI_CLK_HSIC3, "clk_hsic3", "dout_aclk_peri_66",
+		EN_IP_PERI0, 23, 0, 0),
+	GATE(PERI_CLK_WDT_EGL, "clk_wdt_egl", "dout_aclk_peri_66",
+		EN_IP_PERI0, 24, 0, 0),
+	GATE(PERI_CLK_WDT_KFC, "clk_wdt_kfc", "dout_aclk_peri_66",
+		EN_IP_PERI0, 25, 0, 0),
+
+	GATE(PERI_CLK_UART4, "clk_uart4", "dout_aclk_peri_66",
+		EN_IP_PERI2, 0, 0, 0),
+	GATE(PERI_CLK_PWM, "clk_pwm", "dout_aclk_peri_66",
+		EN_IP_PERI2, 3, 0, 0),
+	GATE(PERI_CLK_SPDIF, "clk_spdif", "dout_aclk_peri_66",
+		EN_IP_PERI2, 6, 0, 0),
+	GATE(PERI_CLK_SPI0, "clk_spi0", "dout_aclk_peri_66",
+		EN_IP_PERI2, 7, 0, 0),
+	GATE(PERI_CLK_SPI1, "clk_spi1", "dout_aclk_peri_66",
+		EN_IP_PERI2, 8, 0, 0),
+	GATE(PERI_CLK_SPI2, "clk_spi2", "dout_aclk_peri_66",
+		EN_IP_PERI2, 9, 0, 0),
+	GATE(PERI_CLK_TMU0, "clk_tmu0", "dout_aclk_peri_66",
+		EN_IP_PERI2, 10, 0, 0),
+	GATE(PERI_CLK_TMU1, "clk_tmu1", "dout_aclk_peri_66",
+		EN_IP_PERI2, 11, 0, 0),
+	GATE(PERI_CLK_TMU2, "clk_tmu2", "dout_aclk_peri_66",
+		EN_IP_PERI2, 12, 0, 0),
+	GATE(PERI_CLK_TMU3, "clk_tmu3", "dout_aclk_peri_66",
+		EN_IP_PERI2, 13, 0, 0),
+	GATE(PERI_CLK_TMU4, "clk_tmu4", "dout_aclk_peri_66",
+		EN_IP_PERI2, 14, 0, 0),
+	GATE(PERI_CLK_ADC, "clk_adc", "dout_aclk_peri_66",
+		EN_IP_PERI2, 18, 0, 0),
+	GATE(PERI_CLK_UART0, "clk_uart0", "dout_aclk_peri_66",
+		EN_IP_PERI2, 19, 0, 0),
+	GATE(PERI_CLK_UART1, "clk_uart1", "dout_aclk_peri_66",
+		EN_IP_PERI2, 20, 0, 0),
+	GATE(PERI_CLK_UART2, "clk_uart2", "dout_aclk_peri_66",
+		EN_IP_PERI2, 21, 0, 0),
+
+	GATE(PERI_CLK_CHIPID, "clk_chipid", "dout_aclk_peri_66",
+		EN_IP_PERI_SECURE_CHIPID, 2, 0, 0),
+
+	GATE(PERI_CLK_PROVKEY0, "clk_provkey0", "dout_aclk_peri_66",
+		EN_IP_PERI_SECURE_PROVKEY0, 1, 0, 0),
+
+	GATE(PERI_CLK_PROVKEY1, "clk_provkey1", "dout_aclk_peri_66",
+		EN_IP_PERI_SECURE_PROVKEY1, 2, 0, 0),
+
+	GATE(PERI_CLK_SECKEY, "clk_seckey", "dout_aclk_peri_66",
+		EN_IP_PERI_SECURE_SECKEY, 5, 0, 0),
+
+	GATE(PERI_CLK_TOP_RTC, "clk_top_rtc", "dout_aclk_peri_66",
+		EN_IP_PERI_SECURE_TOP_RTC, 5, 0, 0),
+
+	GATE(PERI_CLK_TZPC0, "clk_tzpc0", "dout_aclk_peri_66",
+		EN_IP_PERI_SECURE_TZPC, 10, 0, 0),
+	GATE(PERI_CLK_TZPC1, "clk_tzpc1", "dout_aclk_peri_66",
+		EN_IP_PERI_SECURE_TZPC, 11, 0, 0),
+	GATE(PERI_CLK_TZPC2, "clk_tzpc2", "dout_aclk_peri_66",
+		EN_IP_PERI_SECURE_TZPC, 12, 0, 0),
+	GATE(PERI_CLK_TZPC3, "clk_tzpc3", "dout_aclk_peri_66",
+		EN_IP_PERI_SECURE_TZPC, 13, 0, 0),
+	GATE(PERI_CLK_TZPC4, "clk_tzpc4", "dout_aclk_peri_66",
+		EN_IP_PERI_SECURE_TZPC, 14, 0, 0),
+	GATE(PERI_CLK_TZPC5, "clk_tzpc5", "dout_aclk_peri_66",
+		EN_IP_PERI_SECURE_TZPC, 15, 0, 0),
+	GATE(PERI_CLK_TZPC6, "clk_tzpc6", "dout_aclk_peri_66",
+		EN_IP_PERI_SECURE_TZPC, 16, 0, 0),
+	GATE(PERI_CLK_TZPC7, "clk_tzpc7", "dout_aclk_peri_66",
+		EN_IP_PERI_SECURE_TZPC, 17, 0, 0),
+	GATE(PERI_CLK_TZPC8, "clk_tzpc8", "dout_aclk_peri_66",
+		EN_IP_PERI_SECURE_TZPC, 18, 0, 0),
+	GATE(PERI_CLK_TZPC9, "clk_tzpc9", "dout_aclk_peri_66",
+		EN_IP_PERI_SECURE_TZPC, 19, 0, 0),
+	GATE(PERI_CLK_TZPC10, "clk_tzpc10", "dout_aclk_peri_66",
+		EN_IP_PERI_SECURE_TZPC, 20, 0, 0),
+};
+
+static void __init exynos5260_clk_peri_init(struct device_node *np)
+{
+	struct exynos5260_cmu_info cmu = {0};
+
+	cmu.mux_clks = peri_mux_clks;
+	cmu.nr_mux_clks = ARRAY_SIZE(peri_mux_clks);
+	cmu.div_clks = peri_div_clks;
+	cmu.nr_div_clks = ARRAY_SIZE(peri_div_clks);
+	cmu.gate_clks = peri_gate_clks;
+	cmu.nr_gate_clks = ARRAY_SIZE(peri_gate_clks);
+	cmu.nr_clk_ids = PERI_NR_CLK;
+	cmu.clk_regs = peri_clk_regs;
+	cmu.nr_clk_regs = ARRAY_SIZE(peri_clk_regs);
+
+	exynos5260_cmu_register_one(np, &cmu);
+}
+
+CLK_OF_DECLARE(exynos5260_clk_peri, "samsung,exynos5260-clock-peri",
+		exynos5260_clk_peri_init);
+
+
+/* CMU_TOP */
+
+static unsigned long top_clk_regs[] __initdata = {
+	DISP_PLL_LOCK,
+	AUD_PLL_LOCK,
+	DISP_PLL_CON0,
+	DISP_PLL_CON1,
+	DISP_PLL_FDET,
+	AUD_PLL_CON0,
+	AUD_PLL_CON1,
+	AUD_PLL_CON2,
+	AUD_PLL_FDET,
+	MUX_SEL_TOP_PLL0,
+	MUX_SEL_TOP_MFC,
+	MUX_SEL_TOP_G2D,
+	MUX_SEL_TOP_GSCL,
+	MUX_SEL_TOP_ISP10,
+	MUX_SEL_TOP_ISP11,
+	MUX_SEL_TOP_DISP0,
+	MUX_SEL_TOP_DISP1,
+	MUX_SEL_TOP_BUS,
+	MUX_SEL_TOP_PERI0,
+	MUX_SEL_TOP_PERI1,
+	MUX_SEL_TOP_FSYS,
+	DIV_TOP_G2D_MFC,
+	DIV_TOP_GSCL_ISP0,
+	DIV_TOP_ISP10,
+	DIV_TOP_ISP11,
+	DIV_TOP_DISP,
+	DIV_TOP_BUS,
+	DIV_TOP_PERI0,
+	DIV_TOP_PERI1,
+	DIV_TOP_PERI2,
+	DIV_TOP_FSYS0,
+	DIV_TOP_FSYS1,
+	DIV_TOP_HPM,
+	DIV_TOP_PLL_FDET,
+	EN_ACLK_TOP,
+	EN_SCLK_TOP,
+	EN_IP_TOP,
+};
+
+/* fixed rate clocks generated inside the soc */
+struct samsung_fixed_rate_clock fixed_rate_clks[] __initdata = {
+	FRATE(PHYCLK_DPTX_PHY_CH3_TXD_CLK, "phyclk_dptx_phy_ch3_txd_clk", NULL,
+			CLK_IS_ROOT, 270000000),
+	FRATE(PHYCLK_DPTX_PHY_CH2_TXD_CLK, "phyclk_dptx_phy_ch2_txd_clk", NULL,
+			CLK_IS_ROOT, 270000000),
+	FRATE(PHYCLK_DPTX_PHY_CH1_TXD_CLK, "phyclk_dptx_phy_ch1_txd_clk", NULL,
+			CLK_IS_ROOT, 270000000),
+	FRATE(PHYCLK_DPTX_PHY_CH0_TXD_CLK, "phyclk_dptx_phy_ch0_txd_clk", NULL,
+			CLK_IS_ROOT, 270000000),
+	FRATE(phyclk_hdmi_phy_tmds_clko, "phyclk_hdmi_phy_tmds_clko", NULL,
+			CLK_IS_ROOT, 250000000),
+	FRATE(PHYCLK_HDMI_PHY_PIXEL_CLKO, "phyclk_hdmi_phy_pixel_clko", NULL,
+			CLK_IS_ROOT, 1660000000),
+	FRATE(PHYCLK_HDMI_LINK_O_TMDS_CLKHI, "phyclk_hdmi_link_o_tmds_clkhi",
+			NULL, CLK_IS_ROOT, 125000000),
+	FRATE(PHYCLK_MIPI_DPHY_4L_M_TXBYTECLKHS,
+			"phyclk_mipi_dphy_4l_m_txbyteclkhs" , NULL,
+			CLK_IS_ROOT, 187500000),
+	FRATE(PHYCLK_DPTX_PHY_O_REF_CLK_24M, "phyclk_dptx_phy_o_ref_clk_24m",
+			NULL, CLK_IS_ROOT, 24000000),
+	FRATE(PHYCLK_DPTX_PHY_CLK_DIV2, "phyclk_dptx_phy_clk_div2", NULL,
+			CLK_IS_ROOT, 135000000),
+	FRATE(PHYCLK_MIPI_DPHY_4L_M_RXCLKESC0,
+			"phyclk_mipi_dphy_4l_m_rxclkesc0", NULL,
+			CLK_IS_ROOT, 20000000),
+	FRATE(PHYCLK_USBHOST20_PHY_PHYCLOCK, "phyclk_usbhost20_phy_phyclock",
+			NULL, CLK_IS_ROOT, 60000000),
+	FRATE(PHYCLK_USBHOST20_PHY_FREECLK, "phyclk_usbhost20_phy_freeclk",
+			NULL, CLK_IS_ROOT, 60000000),
+	FRATE(PHYCLK_USBHOST20_PHY_CLK48MOHCI,
+			"phyclk_usbhost20_phy_clk48mohci",
+			NULL, CLK_IS_ROOT, 48000000),
+	FRATE(PHYCLK_USBDRD30_UDRD30_PIPE_PCLK,
+			"phyclk_usbdrd30_udrd30_pipe_pclk", NULL,
+			CLK_IS_ROOT, 125000000),
+	FRATE(PHYCLK_USBDRD30_UDRD30_PHYCLOCK,
+			"phyclk_usbdrd30_udrd30_phyclock", NULL,
+			CLK_IS_ROOT, 60000000),
+};
+
+PNAME(mout_memtop_pll_user_p) = {"fin_pll", "dout_mem_pll"};
+PNAME(mout_bustop_pll_user_p) = {"fin_pll", "dout_bus_pll"};
+PNAME(mout_mediatop_pll_user_p) = {"fin_pll", "dout_media_pll"};
+PNAME(mout_audtop_pll_user_p) = {"fin_pll", "mout_aud_pll"};
+PNAME(mout_aud_pll_p) = {"fin_pll", "fout_aud_pll"};
+PNAME(mout_disp_pll_p) = {"fin_pll", "fout_disp_pll"};
+PNAME(mout_mfc_bustop_333_p) = {"mout_bustop_pll_user", "mout_disp_pll"};
+PNAME(mout_aclk_mfc_333_p) = {"mout_mediatop_pll_user", "mout_mfc_bustop_333"};
+PNAME(mout_g2d_bustop_333_p) = {"mout_bustop_pll_user", "mout_disp_pll"};
+PNAME(mout_aclk_g2d_333_p) = {"mout_mediatop_pll_user", "mout_g2d_bustop_333"};
+PNAME(mout_gscl_bustop_333_p) = {"mout_bustop_pll_user", "mout_disp_pll"};
+PNAME(mout_aclk_gscl_333_p) = {"mout_mediatop_pll_user",
+			"mout_gscl_bustop_333"};
+PNAME(mout_m2m_mediatop_400_p) = {"mout_mediatop_pll_user", "mout_disp_pll"};
+PNAME(mout_aclk_gscl_400_p) = {"mout_bustop_pll_user",
+			"mout_m2m_mediatop_400"};
+PNAME(mout_gscl_bustop_fimc_p) = {"mout_bustop_pll_user", "mout_disp_pll"};
+PNAME(mout_aclk_gscl_fimc_p) = {"mout_mediatop_pll_user",
+			"mout_gscl_bustop_fimc"};
+PNAME(mout_isp1_media_266_p) = {"mout_mediatop_pll_user",
+			"mout_memtop_pll_user"};
+PNAME(mout_aclk_isp1_266_p) = {"mout_bustop_pll_user", "mout_isp1_media_266"};
+PNAME(mout_isp1_media_400_p) = {"mout_mediatop_pll_user", "mout_disp_pll"};
+PNAME(mout_aclk_isp1_400_p) = {"mout_bustop_pll_user", "mout_isp1_media_400"};
+PNAME(mout_sclk_isp_spi_p) = {"fin_pll", "mout_bustop_pll_user"};
+PNAME(mout_sclk_isp_uart_p) = {"fin_pll", "mout_bustop_pll_user"};
+PNAME(mout_sclk_isp_sensor_p) = {"fin_pll", "mout_bustop_pll_user"};
+PNAME(mout_disp_disp_333_p) = {"mout_disp_pll", "mout_bustop_pll_user"};
+PNAME(mout_aclk_disp_333_p) = {"mout_mediatop_pll_user", "mout_disp_disp_333"};
+PNAME(mout_disp_disp_222_p) = {"mout_disp_pll", "mout_bustop_pll_user"};
+PNAME(mout_aclk_disp_222_p) = {"mout_mediatop_pll_user", "mout_disp_disp_222"};
+PNAME(mout_disp_media_pixel_p) = {"mout_mediatop_pll_user",
+			"mout_bustop_pll_user"};
+PNAME(mout_sclk_disp_pixel_p) = {"mout_disp_pll", "mout_disp_media_pixel"};
+PNAME(mout_bus_bustop_400_p) = {"mout_bustop_pll_user", "mout_memtop_pll_user"};
+PNAME(mout_bus_bustop_100_p) = {"mout_bustop_pll_user", "mout_memtop_pll_user"};
+PNAME(mout_sclk_peri_spi_clk_p) = {"fin_pll", "mout_bustop_pll_user"};
+PNAME(mout_sclk_peri_uart_uclk_p) = {"fin_pll", "mout_bustop_pll_user"};
+PNAME(mout_sclk_fsys_usb_p) = {"fin_pll", "mout_bustop_pll_user"};
+PNAME(mout_sclk_fsys_mmc_sdclkin_a_p) = {"fin_pll", "mout_bustop_pll_user"};
+PNAME(mout_sclk_fsys_mmc0_sdclkin_b_p) = {"mout_sclk_fsys_mmc0_sdclkin_a",
+			"mout_mediatop_pll_user"};
+PNAME(mout_sclk_fsys_mmc1_sdclkin_b_p) = {"mout_sclk_fsys_mmc1_sdclkin_a",
+			"mout_mediatop_pll_user"};
+PNAME(mout_sclk_fsys_mmc2_sdclkin_b_p) = {"mout_sclk_fsys_mmc2_sdclkin_a",
+			"mout_mediatop_pll_user"};
+
+struct samsung_mux_clock top_mux_clks[] __initdata = {
+	MUX(TOP_MOUT_MEDIATOP_PLL_USER, "mout_mediatop_pll_user",
+			mout_mediatop_pll_user_p,
+			MUX_SEL_TOP_PLL0, 0, 1),
+	MUX(TOP_MOUT_MEMTOP_PLL_USER, "mout_memtop_pll_user",
+			mout_memtop_pll_user_p,
+			MUX_SEL_TOP_PLL0, 4, 1),
+	MUX(TOP_MOUT_BUSTOP_PLL_USER, "mout_bustop_pll_user",
+			mout_bustop_pll_user_p,
+			MUX_SEL_TOP_PLL0, 8, 1),
+	MUX(TOP_MOUT_DISP_PLL, "mout_disp_pll", mout_disp_pll_p,
+			MUX_SEL_TOP_PLL0, 12, 1),
+	MUX(TOP_MOUT_AUD_PLL, "mout_aud_pll", mout_aud_pll_p,
+			MUX_SEL_TOP_PLL0, 16, 1),
+	MUX(TOP_MOUT_AUDTOP_PLL_USER, "mout_audtop_pll_user",
+			mout_audtop_pll_user_p,
+			MUX_SEL_TOP_PLL0, 24, 1),
+
+	MUX(TOP_MOUT_DISP_DISP_333, "mout_disp_disp_333", mout_disp_disp_333_p,
+			MUX_SEL_TOP_DISP0, 0, 1),
+	MUX(TOP_MOUT_ACLK_DISP_333, "mout_aclk_disp_333", mout_aclk_disp_333_p,
+			MUX_SEL_TOP_DISP0, 8, 1),
+	MUX(TOP_MOUT_DISP_DISP_222, "mout_disp_disp_222", mout_disp_disp_222_p,
+			MUX_SEL_TOP_DISP0, 12, 1),
+	MUX(TOP_MOUT_ACLK_DISP_222, "mout_aclk_disp_222", mout_aclk_disp_222_p,
+			MUX_SEL_TOP_DISP0, 20, 1),
+
+	MUX(TOP_MOUT_FIMD1, "mout_sclk_disp_pixel", mout_sclk_disp_pixel_p,
+			MUX_SEL_TOP_DISP1, 0, 1),
+	MUX(TOP_MOUT_DISP_MEDIA_PIXEL, "mout_disp_media_pixel",
+			mout_disp_media_pixel_p,
+			MUX_SEL_TOP_DISP1, 8, 1),
+
+	MUX(TOP_MOUT_SCLK_PERI_SPI2_CLK, "mout_sclk_peri_spi2_clk",
+			mout_sclk_peri_spi_clk_p,
+			MUX_SEL_TOP_PERI1, 0, 1),
+	MUX(TOP_MOUT_SCLK_PERI_SPI1_CLK, "mout_sclk_peri_spi1_clk",
+			mout_sclk_peri_spi_clk_p,
+			MUX_SEL_TOP_PERI1, 4, 1),
+	MUX(TOP_MOUT_SCLK_PERI_SPI0_CLK, "mout_sclk_peri_spi0_clk",
+			mout_sclk_peri_spi_clk_p,
+			MUX_SEL_TOP_PERI1, 8, 1),
+	MUX(TOP_MOUT_SCLK_PERI_UART1_UCLK, "mout_sclk_peri_uart1_uclk",
+			mout_sclk_peri_uart_uclk_p,
+			MUX_SEL_TOP_PERI1, 12, 1),
+	MUX(TOP_MOUT_SCLK_PERI_UART2_UCLK, "mout_sclk_peri_uart2_uclk",
+			mout_sclk_peri_uart_uclk_p,
+			MUX_SEL_TOP_PERI1, 16, 1),
+	MUX(TOP_MOUT_SCLK_PERI_UART0_UCLK, "mout_sclk_peri_uart0_uclk",
+			mout_sclk_peri_uart_uclk_p,
+			MUX_SEL_TOP_PERI1, 20, 1),
+
+
+	MUX(TOP_MOUT_BUS1_BUSTOP_400, "mout_bus1_bustop_400",
+			mout_bus_bustop_400_p,
+			MUX_SEL_TOP_BUS, 0, 1),
+	MUX(TOP_MOUT_BUS1_BUSTOP_100, "mout_bus1_bustop_100",
+			mout_bus_bustop_100_p,
+			MUX_SEL_TOP_BUS, 4, 1),
+	MUX(TOP_MOUT_BUS2_BUSTOP_100, "mout_bus2_bustop_100",
+			mout_bus_bustop_100_p,
+			MUX_SEL_TOP_BUS, 8, 1),
+	MUX(TOP_MOUT_BUS2_BUSTOP_400, "mout_bus2_bustop_400",
+			mout_bus_bustop_400_p,
+			MUX_SEL_TOP_BUS, 12, 1),
+	MUX(TOP_MOUT_BUS3_BUSTOP_400, "mout_bus3_bustop_400",
+			mout_bus_bustop_400_p,
+			MUX_SEL_TOP_BUS, 16, 1),
+	MUX(TOP_MOUT_BUS3_BUSTOP_100, "mout_bus3_bustop_100",
+			mout_bus_bustop_100_p,
+			MUX_SEL_TOP_BUS, 20, 1),
+	MUX(TOP_MOUT_BUS4_BUSTOP_400, "mout_bus4_bustop_400",
+			mout_bus_bustop_400_p,
+			MUX_SEL_TOP_BUS, 24, 1),
+	MUX(TOP_MOUT_BUS4_BUSTOP_100, "mout_bus4_bustop_100",
+			mout_bus_bustop_100_p,
+			MUX_SEL_TOP_BUS, 28, 1),
+
+	MUX(TOP_MOUT_SCLK_FSYS_USB, "mout_sclk_fsys_usb",
+			mout_sclk_fsys_usb_p,
+			MUX_SEL_TOP_FSYS, 0, 1),
+	MUX(TOP_MOUT_SCLK_FSYS_MMC2_SDCLKIN_A, "mout_sclk_fsys_mmc2_sdclkin_a",
+			mout_sclk_fsys_mmc_sdclkin_a_p,
+			MUX_SEL_TOP_FSYS, 4, 1),
+	MUX(TOP_MOUT_SCLK_FSYS_MMC2_SDCLKIN_B, "mout_sclk_fsys_mmc2_sdclkin_b",
+			mout_sclk_fsys_mmc2_sdclkin_b_p,
+			MUX_SEL_TOP_FSYS, 8, 1),
+	MUX(TOP_MOUT_SCLK_FSYS_MMC1_SDCLKIN_A, "mout_sclk_fsys_mmc1_sdclkin_a",
+			mout_sclk_fsys_mmc_sdclkin_a_p,
+			MUX_SEL_TOP_FSYS, 12, 1),
+	MUX(TOP_MOUT_SCLK_FSYS_MMC1_SDCLKIN_B, "mout_sclk_fsys_mmc1_sdclkin_b",
+			mout_sclk_fsys_mmc1_sdclkin_b_p,
+			MUX_SEL_TOP_FSYS, 16, 1),
+	MUX(TOP_MOUT_SCLK_FSYS_MMC0_SDCLKIN_A, "mout_sclk_fsys_mmc0_sdclkin_a",
+			mout_sclk_fsys_mmc_sdclkin_a_p,
+			MUX_SEL_TOP_FSYS, 20, 1),
+	MUX(TOP_MOUT_SCLK_FSYS_MMC0_SDCLKIN_B, "mout_sclk_fsys_mmc0_sdclkin_b",
+			mout_sclk_fsys_mmc0_sdclkin_b_p,
+			MUX_SEL_TOP_FSYS, 24, 1),
+
+	MUX(TOP_MOUT_ISP1_MEDIA_400, "mout_isp1_media_400",
+			mout_isp1_media_400_p,
+			MUX_SEL_TOP_ISP10, 4, 1),
+	MUX(TOP_MOUT_ACLK_ISP1_400, "mout_aclk_isp1_400", mout_aclk_isp1_400_p,
+			MUX_SEL_TOP_ISP10, 8 , 1),
+	MUX(TOP_MOUT_ISP1_MEDIA_266, "mout_isp1_media_266",
+			mout_isp1_media_266_p,
+			MUX_SEL_TOP_ISP10, 16, 1),
+	MUX(TOP_MOUT_ACLK_ISP1_266, "mout_aclk_isp1_266", mout_aclk_isp1_266_p,
+			MUX_SEL_TOP_ISP10, 20, 1),
+
+	MUX(TOP_MOUT_SCLK_ISP1_SPI0, "mout_sclk_isp1_spi0", mout_sclk_isp_spi_p,
+			MUX_SEL_TOP_ISP11, 4, 1),
+	MUX(TOP_MOUT_SCLK_ISP1_SPI1, "mout_sclk_isp1_spi1", mout_sclk_isp_spi_p,
+			MUX_SEL_TOP_ISP11, 8, 1),
+	MUX(TOP_MOUT_SCLK_ISP1_UART, "mout_sclk_isp1_uart",
+			mout_sclk_isp_uart_p,
+			MUX_SEL_TOP_ISP11, 12, 1),
+	MUX(TOP_MOUT_SCLK_ISP1_SENSOR0, "mout_sclk_isp1_sensor0",
+			mout_sclk_isp_sensor_p,
+			MUX_SEL_TOP_ISP11, 16, 1),
+	MUX(TOP_MOUT_SCLK_ISP1_SENSOR1, "mout_sclk_isp1_sensor1",
+			mout_sclk_isp_sensor_p,
+			MUX_SEL_TOP_ISP11, 20, 1),
+	MUX(TOP_MOUT_SCLK_ISP1_SENSOR2, "mout_sclk_isp1_sensor2",
+			mout_sclk_isp_sensor_p,
+			MUX_SEL_TOP_ISP11, 24, 1),
+
+	MUX(TOP_MOUT_MFC_BUSTOP_333, "mout_mfc_bustop_333",
+			mout_mfc_bustop_333_p,
+			MUX_SEL_TOP_MFC, 4, 1),
+	MUX(TOP_MOUT_ACLK_MFC_333, "mout_aclk_mfc_333", mout_aclk_mfc_333_p,
+			MUX_SEL_TOP_MFC, 8, 1),
+
+	MUX(TOP_MOUT_G2D_BUSTOP_333, "mout_g2d_bustop_333",
+			mout_g2d_bustop_333_p,
+			MUX_SEL_TOP_G2D, 4, 1),
+	MUX(TOP_MOUT_ACLK_G2D_333, "mout_aclk_g2d_333", mout_aclk_g2d_333_p,
+			MUX_SEL_TOP_G2D, 8, 1),
+
+	MUX(TOP_MOUT_M2M_MEDIATOP_400, "mout_m2m_mediatop_400",
+			mout_m2m_mediatop_400_p,
+			MUX_SEL_TOP_GSCL, 0, 1),
+	MUX(TOP_MOUT_ACLK_GSCL_400, "mout_aclk_gscl_400",
+			mout_aclk_gscl_400_p,
+			MUX_SEL_TOP_GSCL, 4, 1),
+	MUX(TOP_MOUT_GSCL_BUSTOP_333, "mout_gscl_bustop_333",
+			mout_gscl_bustop_333_p,
+			MUX_SEL_TOP_GSCL, 8, 1),
+	MUX(TOP_MOUT_ACLK_GSCL_333, "mout_aclk_gscl_333",
+			mout_aclk_gscl_333_p,
+			MUX_SEL_TOP_GSCL, 12, 1),
+	MUX(TOP_MOUT_GSCL_BUSTOP_FIMC, "mout_gscl_bustop_fimc",
+			mout_gscl_bustop_fimc_p,
+			MUX_SEL_TOP_GSCL, 16, 1),
+	MUX(TOP_MOUT_ACLK_GSCL_FIMC, "mout_aclk_gscl_fimc",
+			mout_aclk_gscl_fimc_p,
+			MUX_SEL_TOP_GSCL, 20, 1),
+};
+
+struct samsung_div_clock top_div_clks[] __initdata = {
+	DIV(TOP_DOUT_ACLK_G2D_333, "dout_aclk_g2d_333", "mout_aclk_g2d_333",
+			DIV_TOP_G2D_MFC, 0, 3),
+	DIV(TOP_DOUT_ACLK_MFC_333, "dout_aclk_mfc_333", "mout_aclk_mfc_333",
+			DIV_TOP_G2D_MFC, 4, 3),
+
+	DIV(TOP_DOUT_ACLK_GSCL_333, "dout_aclk_gscl_333", "mout_aclk_gscl_333",
+			DIV_TOP_GSCL_ISP0, 0, 3),
+	DIV(TOP_DOUT_ACLK_GSCL_400, "dout_aclk_gscl_400", "mout_aclk_gscl_400",
+			DIV_TOP_GSCL_ISP0, 4, 3),
+	DIV(TOP_DOUT_ACLK_GSCL_FIMC, "dout_aclk_gscl_fimc",
+			"mout_aclk_gscl_fimc", DIV_TOP_GSCL_ISP0, 8, 3),
+	DIV(TOP_DOUT_SCLK_ISP1_SENSOR0_A, "dout_sclk_isp1_sensor0_a",
+			"mout_aclk_gscl_fimc", DIV_TOP_GSCL_ISP0, 16, 4),
+	DIV(TOP_DOUT_SCLK_ISP1_SENSOR1_A, "dout_sclk_isp1_sensor1_a",
+			"mout_aclk_gscl_400", DIV_TOP_GSCL_ISP0, 20, 4),
+	DIV(TOP_DOUT_SCLK_ISP1_SENSOR2_A, "dout_sclk_isp1_sensor2_a",
+			"mout_aclk_gscl_fimc", DIV_TOP_GSCL_ISP0, 24, 4),
+
+	DIV(TOP_DOUT_ACLK_ISP1_266, "dout_aclk_isp1_266", "mout_aclk_isp1_266",
+			DIV_TOP_ISP10, 0, 3),
+	DIV(TOP_DOUT_ACLK_ISP1_400, "dout_aclk_isp1_400", "mout_aclk_isp1_400",
+			DIV_TOP_ISP10, 4, 3),
+	DIV(TOP_DOUT_SCLK_ISP1_SPI0_A, "dout_sclk_isp1_spi0_a",
+			"mout_sclk_isp1_spi0", DIV_TOP_ISP10, 12, 4),
+	DIV(TOP_DOUT_SCLK_ISP1_SPI0_B, "dout_sclk_isp1_spi0_b",
+			"dout_sclk_isp1_spi0_a", DIV_TOP_ISP10, 16, 8),
+
+	DIV(TOP_DOUT_SCLK_ISP1_SPI1_A, "dout_sclk_isp1_spi1_a",
+			"mout_sclk_isp1_spi1", DIV_TOP_ISP11, 0, 4),
+	DIV(TOP_DOUT_SCLK_ISP1_SPI1_B, "dout_sclk_isp1_spi1_b",
+			"dout_sclk_isp1_spi1_a", DIV_TOP_ISP11, 4, 8),
+	DIV(TOP_DOUT_SCLK_ISP1_UART, "dout_sclk_isp1_uart",
+			"mout_sclk_isp1_uart", DIV_TOP_ISP11, 12, 4),
+	DIV(TOP_DOUT_SCLK_ISP1_SENSOR0_B, "dout_sclk_isp1_sensor0_b",
+			"dout_sclk_isp1_sensor0_a", DIV_TOP_ISP11, 16, 4),
+	DIV(TOP_DOUT_SCLK_ISP1_SENSOR1_B, "dout_sclk_isp1_sensor1_b",
+			"dout_sclk_isp1_sensor1_a", DIV_TOP_ISP11, 20, 4),
+	DIV(TOP_DOUT_SCLK_ISP1_SENSOR2_B, "dout_sclk_isp1_sensor2_b",
+			"dout_sclk_isp1_sensor2_a", DIV_TOP_ISP11, 24, 4),
+
+	DIV(TOP_DOUTTOP__SCLK_HPM_TARGETCLK, "dout_sclk_hpm_targetclk",
+			"mout_bustop_pll_user", DIV_TOP_HPM, 0, 3),
+
+	DIV(TOP_DOUT_ACLK_DISP_333, "dout_aclk_disp_333", "mout_aclk_disp_333",
+			DIV_TOP_DISP, 0, 3),
+	DIV(TOP_DOUT_ACLK_DISP_222, "dout_aclk_disp_222", "mout_aclk_disp_222",
+			DIV_TOP_DISP, 4, 3),
+	DIV(TOP_DOUT_SCLK_DISP_PIXEL, "dout_sclk_disp_pixel",
+			"mout_sclk_disp_pixel",	DIV_TOP_DISP, 8, 3),
+
+	DIV(TOP_DOUT_ACLK_BUS1_400, "dout_aclk_bus1_400",
+			"mout_bus1_bustop_400",	DIV_TOP_BUS, 0, 3),
+	DIV(TOP_DOUT_ACLK_BUS1_100, "dout_aclk_bus1_100",
+			"mout_bus1_bustop_100",	DIV_TOP_BUS, 4, 4),
+	DIV(TOP_DOUT_ACLK_BUS2_400, "dout_aclk_bus2_400",
+			"mout_bus2_bustop_400",	DIV_TOP_BUS, 8, 3),
+	DIV(TOP_DOUT_ACLK_BUS2_100, "dout_aclk_bus2_100",
+			"mout_bus2_bustop_100",	DIV_TOP_BUS, 12, 4),
+	DIV(TOP_DOUT_ACLK_BUS3_400, "dout_aclk_bus3_400",
+			"mout_bus3_bustop_400", DIV_TOP_BUS, 16, 3),
+	DIV(TOP_DOUT_ACLK_BUS3_100, "dout_aclk_bus3_100",
+			"mout_bus3_bustop_100",	DIV_TOP_BUS, 20, 4),
+	DIV(TOP_DOUT_ACLK_BUS4_400, "dout_aclk_bus4_400",
+			"mout_bus4_bustop_400",	DIV_TOP_BUS, 24, 3),
+	DIV(TOP_DOUT_ACLK_BUS4_100, "dout_aclk_bus4_100",
+			"mout_bus4_bustop_100",	DIV_TOP_BUS, 28, 4),
+
+	DIV(TOP_DOUT_SCLK_PERI_SPI0_A, "dout_sclk_peri_spi0_a",
+			"mout_sclk_peri_spi0_clk", DIV_TOP_PERI0, 4, 4),
+	DIV(TOP_DOUT_SCLK_PERI_SPI0_B, "dout_sclk_peri_spi0_b",
+			"dout_sclk_peri_spi0_a", DIV_TOP_PERI0, 8, 8),
+	DIV(TOP_DOUT_SCLK_PERI_SPI1_A, "dout_sclk_peri_spi1_a",
+			"mout_sclk_peri_spi1_clk", DIV_TOP_PERI0, 16, 4),
+	DIV(TOP_DOUT_SCLK_PERI_SPI1_B, "dout_sclk_peri_spi1_b",
+			"dout_sclk_peri_spi1_a", DIV_TOP_PERI0, 20, 8),
+
+	DIV(TOP_DOUT_SCLK_PERI_SPI2_A, "dout_sclk_peri_spi2_a",
+			"mout_sclk_peri_spi2_clk", DIV_TOP_PERI1, 0, 4),
+	DIV(TOP_DOUT_SCLK_PERI_SPI2_B, "dout_sclk_peri_spi2_b",
+			"dout_sclk_peri_spi2_a", DIV_TOP_PERI1, 4, 8),
+	DIV(TOP_DOUT_SCLK_PERI_UART1, "dout_sclk_peri_uart1",
+			"mout_sclk_peri_uart1_uclk", DIV_TOP_PERI1, 16, 4),
+	DIV(TOP_DOUT_SCLK_PERI_UART2, "dout_sclk_peri_uart2",
+			"mout_sclk_peri_uart2_uclk", DIV_TOP_PERI1, 20, 4),
+	DIV(TOP_DOUT_SCLK_PERI_UART0, "dout_sclk_peri_uart0",
+			"mout_sclk_peri_uart0_uclk", DIV_TOP_PERI1, 24, 4),
+
+	DIV(TOP_DOUT_ACLK_PERI_66, "dout_aclk_peri_66", "mout_bustop_pll_user",
+			DIV_TOP_PERI2, 20, 4),
+	DIV(TOP_DOUT_ACLK_PERI_AUD, "dout_aclk_peri_aud",
+			"mout_audtop_pll_user", DIV_TOP_PERI2, 24, 3),
+
+	DIV(TOP_DOUT_ACLK_FSYS_200, "dout_aclk_fsys_200",
+			"mout_bustop_pll_user", DIV_TOP_FSYS0, 0, 3),
+	DIV(TOP_DOUT_SCLK_FSYS_USBDRD30_SUSPEND_CLK,
+			"dout_sclk_fsys_usbdrd30_suspend_clk",
+			"mout_sclk_fsys_usb", DIV_TOP_FSYS0, 4, 4),
+	DIV(TOP_DOUT_SCLK_FSYS_MMC0_SDCLKIN_A, "dout_sclk_fsys_mmc0_sdclkin_a",
+			"mout_sclk_fsys_mmc0_sdclkin_b",
+			DIV_TOP_FSYS0, 12, 4),
+	DIV(TOP_DOUT_SCLK_FSYS_MMC0_SDCLKIN_B, "dout_sclk_fsys_mmc0_sdclkin_b",
+			"dout_sclk_fsys_mmc0_sdclkin_a",
+			DIV_TOP_FSYS0, 16, 8),
+
+
+	DIV(TOP_DOUT_SCLK_FSYS_MMC1_SDCLKIN_A, "dout_sclk_fsys_mmc1_sdclkin_a",
+			"mout_sclk_fsys_mmc1_sdclkin_b",
+			DIV_TOP_FSYS1, 0, 4),
+	DIV(TOP_DOUT_SCLK_FSYS_MMC1_SDCLKIN_B, "dout_sclk_fsys_mmc1_sdclkin_b",
+			"dout_sclk_fsys_mmc1_sdclkin_a",
+			DIV_TOP_FSYS1, 4, 8),
+	DIV(TOP_DOUT_SCLK_FSYS_MMC2_SDCLKIN_A, "dout_sclk_fsys_mmc2_sdclkin_a",
+			"mout_sclk_fsys_mmc2_sdclkin_b",
+			DIV_TOP_FSYS1, 12, 4),
+	DIV(TOP_DOUT_SCLK_FSYS_MMC2_SDCLKIN_B, "dout_sclk_fsys_mmc2_sdclkin_b",
+			"dout_sclk_fsys_mmc2_sdclkin_a",
+			DIV_TOP_FSYS1, 16, 8),
+
+};
+
+struct samsung_gate_clock top_gate_clks[] __initdata = {
+	GATE(TOP_SCLK_MMC0, "sclk_fsys_mmc0_sdclkin",
+			"dout_sclk_fsys_mmc0_sdclkin_b",
+			EN_SCLK_TOP, 7, CLK_SET_RATE_PARENT, 0),
+	GATE(TOP_SCLK_MMC1, "sclk_fsys_mmc1_sdclkin",
+			"dout_sclk_fsys_mmc1_sdclkin_b",
+			EN_SCLK_TOP, 8, CLK_SET_RATE_PARENT, 0),
+	GATE(TOP_SCLK_MMC2, "sclk_fsys_mmc2_sdclkin",
+			"dout_sclk_fsys_mmc2_sdclkin_b",
+			EN_SCLK_TOP, 9, CLK_SET_RATE_PARENT, 0),
+	GATE(TOP_SCLK_FIMD1, "sclk_disp_pixel", "dout_sclk_disp_pixel",
+			EN_ACLK_TOP, 10, CLK_IGNORE_UNUSED |
+			CLK_SET_RATE_PARENT, 0),
+};
+
+static struct samsung_pll_clock top_pll_clks[] __initdata = {
+	PLL(pll_2550xx, TOP_FOUT_DISP_PLL, "fout_disp_pll", "fin_pll",
+		DISP_PLL_LOCK, DISP_PLL_CON0,
+		pll2550_24mhz_tbl),
+	PLL(pll_2650xx, TOP_FOUT_AUD_PLL, "fout_aud_pll", "fin_pll",
+		AUD_PLL_LOCK, AUD_PLL_CON0,
+		pll2650_24mhz_tbl),
+};
+
+static void __init exynos5260_clk_top_init(struct device_node *np)
+{
+	struct exynos5260_cmu_info cmu = {0};
+
+	cmu.pll_clks = top_pll_clks;
+	cmu.nr_pll_clks =  ARRAY_SIZE(top_pll_clks);
+	cmu.mux_clks = top_mux_clks;
+	cmu.nr_mux_clks = ARRAY_SIZE(top_mux_clks);
+	cmu.div_clks = top_div_clks;
+	cmu.nr_div_clks = ARRAY_SIZE(top_div_clks);
+	cmu.gate_clks = top_gate_clks;
+	cmu.nr_gate_clks = ARRAY_SIZE(top_gate_clks);
+	cmu.fixed_clks = fixed_rate_clks;
+	cmu.nr_fixed_clks = ARRAY_SIZE(fixed_rate_clks);
+	cmu.nr_clk_ids = TOP_NR_CLK;
+	cmu.clk_regs = top_clk_regs;
+	cmu.nr_clk_regs = ARRAY_SIZE(top_clk_regs);
+
+	exynos5260_cmu_register_one(np, &cmu);
+}
+
+CLK_OF_DECLARE(exynos5260_clk_top, "samsung,exynos5260-clock-top",
+		exynos5260_clk_top_init);

drivers/clk/samsung/clk-exynos5260.h

@@ -0,0 +1,459 @@
+/*
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ * Author: Rahul Sharma <rahul.sharma@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Common Clock Framework support for Exynos5260 SoC.
+ */
+
+#ifndef __CLK_EXYNOS5260_H
+#define __CLK_EXYNOS5260_H
+
+/*
+*Registers for CMU_AUD
+*/
+#define MUX_SEL_AUD				0x0200
+#define MUX_ENABLE_AUD				0x0300
+#define MUX_STAT_AUD				0x0400
+#define MUX_IGNORE_AUD				0x0500
+#define DIV_AUD0				0x0600
+#define DIV_AUD1				0x0604
+#define DIV_STAT_AUD0				0x0700
+#define DIV_STAT_AUD1				0x0704
+#define EN_ACLK_AUD				0x0800
+#define EN_PCLK_AUD				0x0900
+#define EN_SCLK_AUD				0x0a00
+#define EN_IP_AUD				0x0b00
+
+/*
+*Registers for CMU_DISP
+*/
+#define MUX_SEL_DISP0				0x0200
+#define MUX_SEL_DISP1				0x0204
+#define MUX_SEL_DISP2				0x0208
+#define MUX_SEL_DISP3				0x020C
+#define MUX_SEL_DISP4				0x0210
+#define MUX_ENABLE_DISP0			0x0300
+#define MUX_ENABLE_DISP1			0x0304
+#define MUX_ENABLE_DISP2			0x0308
+#define MUX_ENABLE_DISP3			0x030c
+#define MUX_ENABLE_DISP4			0x0310
+#define MUX_STAT_DISP0				0x0400
+#define MUX_STAT_DISP1				0x0404
+#define MUX_STAT_DISP2				0x0408
+#define MUX_STAT_DISP3				0x040c
+#define MUX_STAT_DISP4				0x0410
+#define MUX_IGNORE_DISP0			0x0500
+#define MUX_IGNORE_DISP1			0x0504
+#define MUX_IGNORE_DISP2			0x0508
+#define MUX_IGNORE_DISP3			0x050c
+#define MUX_IGNORE_DISP4			0x0510
+#define DIV_DISP				0x0600
+#define DIV_STAT_DISP				0x0700
+#define EN_ACLK_DISP				0x0800
+#define EN_PCLK_DISP				0x0900
+#define EN_SCLK_DISP0				0x0a00
+#define EN_SCLK_DISP1				0x0a04
+#define EN_IP_DISP				0x0b00
+#define EN_IP_DISP_BUS				0x0b04
+
+
+/*
+*Registers for CMU_EGL
+*/
+#define EGL_PLL_LOCK				0x0000
+#define EGL_DPLL_LOCK				0x0004
+#define EGL_PLL_CON0				0x0100
+#define EGL_PLL_CON1				0x0104
+#define EGL_PLL_FREQ_DET			0x010c
+#define EGL_DPLL_CON0				0x0110
+#define EGL_DPLL_CON1				0x0114
+#define EGL_DPLL_FREQ_DET			0x011c
+#define MUX_SEL_EGL				0x0200
+#define MUX_ENABLE_EGL				0x0300
+#define MUX_STAT_EGL				0x0400
+#define DIV_EGL					0x0600
+#define DIV_EGL_PLL_FDET			0x0604
+#define DIV_STAT_EGL				0x0700
+#define DIV_STAT_EGL_PLL_FDET			0x0704
+#define EN_ACLK_EGL				0x0800
+#define EN_PCLK_EGL				0x0900
+#define EN_SCLK_EGL				0x0a00
+#define EN_IP_EGL				0x0b00
+#define CLKOUT_CMU_EGL				0x0c00
+#define CLKOUT_CMU_EGL_DIV_STAT			0x0c04
+#define ARMCLK_STOPCTRL				0x1000
+#define EAGLE_EMA_CTRL				0x1008
+#define EAGLE_EMA_STATUS			0x100c
+#define PWR_CTRL				0x1020
+#define PWR_CTRL2				0x1024
+#define CLKSTOP_CTRL				0x1028
+#define INTR_SPREAD_EN				0x1080
+#define INTR_SPREAD_USE_STANDBYWFI		0x1084
+#define INTR_SPREAD_BLOCKING_DURATION		0x1088
+#define CMU_EGL_SPARE0				0x2000
+#define CMU_EGL_SPARE1				0x2004
+#define CMU_EGL_SPARE2				0x2008
+#define CMU_EGL_SPARE3				0x200c
+#define CMU_EGL_SPARE4				0x2010
+
+/*
+*Registers for CMU_FSYS
+*/
+
+#define MUX_SEL_FSYS0				0x0200
+#define MUX_SEL_FSYS1				0x0204
+#define MUX_ENABLE_FSYS0			0x0300
+#define MUX_ENABLE_FSYS1			0x0304
+#define MUX_STAT_FSYS0				0x0400
+#define MUX_STAT_FSYS1				0x0404
+#define MUX_IGNORE_FSYS0			0x0500
+#define MUX_IGNORE_FSYS1			0x0504
+#define EN_ACLK_FSYS				0x0800
+#define EN_ACLK_FSYS_SECURE_RTIC		0x0804
+#define EN_ACLK_FSYS_SECURE_SMMU_RTIC		0x0808
+#define EN_PCLK_FSYS				0x0900
+#define EN_SCLK_FSYS				0x0a00
+#define EN_IP_FSYS				0x0b00
+#define EN_IP_FSYS_SECURE_RTIC			0x0b04
+#define EN_IP_FSYS_SECURE_SMMU_RTIC		0x0b08
+
+/*
+*Registers for CMU_G2D
+*/
+
+#define MUX_SEL_G2D				0x0200
+#define MUX_ENABLE_G2D				0x0300
+#define MUX_STAT_G2D				0x0400
+#define DIV_G2D					0x0600
+#define DIV_STAT_G2D				0x0700
+#define EN_ACLK_G2D				0x0800
+#define EN_ACLK_G2D_SECURE_SSS			0x0804
+#define EN_ACLK_G2D_SECURE_SLIM_SSS		0x0808
+#define EN_ACLK_G2D_SECURE_SMMU_SLIM_SSS	0x080c
+#define EN_ACLK_G2D_SECURE_SMMU_SSS		0x0810
+#define EN_ACLK_G2D_SECURE_SMMU_MDMA		0x0814
+#define EN_ACLK_G2D_SECURE_SMMU_G2D		0x0818
+#define EN_PCLK_G2D				0x0900
+#define EN_PCLK_G2D_SECURE_SMMU_SLIM_SSS	0x0904
+#define EN_PCLK_G2D_SECURE_SMMU_SSS		0x0908
+#define EN_PCLK_G2D_SECURE_SMMU_MDMA		0x090c
+#define EN_PCLK_G2D_SECURE_SMMU_G2D		0x0910
+#define EN_IP_G2D				0x0b00
+#define EN_IP_G2D_SECURE_SSS			0x0b04
+#define EN_IP_G2D_SECURE_SLIM_SSS		0x0b08
+#define EN_IP_G2D_SECURE_SMMU_SLIM_SSS		0x0b0c
+#define EN_IP_G2D_SECURE_SMMU_SSS		0x0b10
+#define EN_IP_G2D_SECURE_SMMU_MDMA		0x0b14
+#define EN_IP_G2D_SECURE_SMMU_G2D		0x0b18
+
+/*
+*Registers for CMU_G3D
+*/
+
+#define G3D_PLL_LOCK				0x0000
+#define G3D_PLL_CON0				0x0100
+#define G3D_PLL_CON1				0x0104
+#define G3D_PLL_FDET				0x010c
+#define MUX_SEL_G3D				0x0200
+#define MUX_EN_G3D				0x0300
+#define MUX_STAT_G3D				0x0400
+#define MUX_IGNORE_G3D				0x0500
+#define DIV_G3D					0x0600
+#define DIV_G3D_PLL_FDET			0x0604
+#define DIV_STAT_G3D				0x0700
+#define DIV_STAT_G3D_PLL_FDET			0x0704
+#define EN_ACLK_G3D				0x0800
+#define EN_PCLK_G3D				0x0900
+#define EN_SCLK_G3D				0x0a00
+#define EN_IP_G3D				0x0b00
+#define CLKOUT_CMU_G3D				0x0c00
+#define CLKOUT_CMU_G3D_DIV_STAT			0x0c04
+#define G3DCLK_STOPCTRL				0x1000
+#define G3D_EMA_CTRL				0x1008
+#define G3D_EMA_STATUS				0x100c
+
+/*
+*Registers for CMU_GSCL
+*/
+
+#define MUX_SEL_GSCL				0x0200
+#define MUX_EN_GSCL				0x0300
+#define MUX_STAT_GSCL				0x0400
+#define MUX_IGNORE_GSCL				0x0500
+#define DIV_GSCL				0x0600
+#define DIV_STAT_GSCL				0x0700
+#define EN_ACLK_GSCL				0x0800
+#define EN_ACLK_GSCL_FIMC			0x0804
+#define EN_ACLK_GSCL_SECURE_SMMU_GSCL0		0x0808
+#define EN_ACLK_GSCL_SECURE_SMMU_GSCL1		0x080c
+#define EN_ACLK_GSCL_SECURE_SMMU_MSCL0		0x0810
+#define EN_ACLK_GSCL_SECURE_SMMU_MSCL1		0x0814
+#define EN_PCLK_GSCL				0x0900
+#define EN_PCLK_GSCL_FIMC			0x0904
+#define EN_PCLK_GSCL_SECURE_SMMU_GSCL0		0x0908
+#define EN_PCLK_GSCL_SECURE_SMMU_GSCL1		0x090c
+#define EN_PCLK_GSCL_SECURE_SMMU_MSCL0		0x0910
+#define EN_PCLK_GSCL_SECURE_SMMU_MSCL1		0x0914
+#define EN_SCLK_GSCL				0x0a00
+#define EN_SCLK_GSCL_FIMC			0x0a04
+#define EN_IP_GSCL				0x0b00
+#define EN_IP_GSCL_FIMC				0x0b04
+#define EN_IP_GSCL_SECURE_SMMU_GSCL0		0x0b08
+#define EN_IP_GSCL_SECURE_SMMU_GSCL1		0x0b0c
+#define EN_IP_GSCL_SECURE_SMMU_MSCL0		0x0b10
+#define EN_IP_GSCL_SECURE_SMMU_MSCL1		0x0b14
+
+/*
+*Registers for CMU_ISP
+*/
+#define MUX_SEL_ISP0				0x0200
+#define MUX_SEL_ISP1				0x0204
+#define MUX_ENABLE_ISP0				0x0300
+#define MUX_ENABLE_ISP1				0x0304
+#define MUX_STAT_ISP0				0x0400
+#define MUX_STAT_ISP1				0x0404
+#define MUX_IGNORE_ISP0				0x0500
+#define MUX_IGNORE_ISP1				0x0504
+#define DIV_ISP					0x0600
+#define DIV_STAT_ISP				0x0700
+#define EN_ACLK_ISP0				0x0800
+#define EN_ACLK_ISP1				0x0804
+#define EN_PCLK_ISP0				0x0900
+#define EN_PCLK_ISP1				0x0904
+#define EN_SCLK_ISP				0x0a00
+#define EN_IP_ISP0				0x0b00
+#define EN_IP_ISP1				0x0b04
+
+/*
+*Registers for CMU_KFC
+*/
+#define KFC_PLL_LOCK				0x0000
+#define KFC_PLL_CON0				0x0100
+#define KFC_PLL_CON1				0x0104
+#define KFC_PLL_FDET				0x010c
+#define MUX_SEL_KFC0				0x0200
+#define MUX_SEL_KFC2				0x0208
+#define MUX_ENABLE_KFC0				0x0300
+#define MUX_ENABLE_KFC2				0x0308
+#define MUX_STAT_KFC0				0x0400
+#define MUX_STAT_KFC2				0x0408
+#define DIV_KFC					0x0600
+#define DIV_KFC_PLL_FDET			0x0604
+#define DIV_STAT_KFC				0x0700
+#define DIV_STAT_KFC_PLL_FDET			0x0704
+#define EN_ACLK_KFC				0x0800
+#define EN_PCLK_KFC				0x0900
+#define EN_SCLK_KFC				0x0a00
+#define EN_IP_KFC				0x0b00
+#define CLKOUT_CMU_KFC				0x0c00
+#define CLKOUT_CMU_KFC_DIV_STAT			0x0c04
+#define ARMCLK_STOPCTRL_KFC			0x1000
+#define ARM_EMA_CTRL				0x1008
+#define ARM_EMA_STATUS				0x100c
+#define PWR_CTRL_KFC				0x1020
+#define PWR_CTRL2_KFC				0x1024
+#define CLKSTOP_CTRL_KFC			0x1028
+#define INTR_SPREAD_ENABLE_KFC			0x1080
+#define INTR_SPREAD_USE_STANDBYWFI_KFC		0x1084
+#define INTR_SPREAD_BLOCKING_DURATION_KFC	0x1088
+#define CMU_KFC_SPARE0				0x2000
+#define CMU_KFC_SPARE1				0x2004
+#define CMU_KFC_SPARE2				0x2008
+#define CMU_KFC_SPARE3				0x200c
+#define CMU_KFC_SPARE4				0x2010
+
+/*
+*Registers for CMU_MFC
+*/
+#define MUX_SEL_MFC				0x0200
+#define MUX_ENABLE_MFC				0x0300
+#define MUX_STAT_MFC				0x0400
+#define DIV_MFC					0x0600
+#define DIV_STAT_MFC				0x0700
+#define EN_ACLK_MFC				0x0800
+#define EN_ACLK_SECURE_SMMU2_MFC		0x0804
+#define EN_PCLK_MFC				0x0900
+#define EN_PCLK_SECURE_SMMU2_MFC		0x0904
+#define EN_IP_MFC				0x0b00
+#define EN_IP_MFC_SECURE_SMMU2_MFC		0x0b04
+
+/*
+*Registers for CMU_MIF
+*/
+#define MEM_PLL_LOCK				0x0000
+#define BUS_PLL_LOCK				0x0004
+#define MEDIA_PLL_LOCK				0x0008
+#define MEM_PLL_CON0				0x0100
+#define MEM_PLL_CON1				0x0104
+#define MEM_PLL_FDET				0x010c
+#define BUS_PLL_CON0				0x0110
+#define BUS_PLL_CON1				0x0114
+#define BUS_PLL_FDET				0x011c
+#define MEDIA_PLL_CON0				0x0120
+#define MEDIA_PLL_CON1				0x0124
+#define MEDIA_PLL_FDET				0x012c
+#define MUX_SEL_MIF				0x0200
+#define MUX_ENABLE_MIF				0x0300
+#define MUX_STAT_MIF				0x0400
+#define MUX_IGNORE_MIF				0x0500
+#define DIV_MIF					0x0600
+#define DIV_MIF_PLL_FDET			0x0604
+#define DIV_STAT_MIF				0x0700
+#define DIV_STAT_MIF_PLL_FDET			0x0704
+#define EN_ACLK_MIF				0x0800
+#define EN_ACLK_MIF_SECURE_DREX1_TZ		0x0804
+#define EN_ACLK_MIF_SECURE_DREX0_TZ		0x0808
+#define EN_ACLK_MIF_SECURE_INTMEM		0x080c
+#define EN_PCLK_MIF				0x0900
+#define EN_PCLK_MIF_SECURE_MONOCNT		0x0904
+#define EN_PCLK_MIF_SECURE_RTC_APBIF		0x0908
+#define EN_PCLK_MIF_SECURE_DREX1_TZ		0x090c
+#define EN_PCLK_MIF_SECURE_DREX0_TZ		0x0910
+#define EN_SCLK_MIF				0x0a00
+#define EN_IP_MIF				0x0b00
+#define EN_IP_MIF_SECURE_MONOCNT		0x0b04
+#define EN_IP_MIF_SECURE_RTC_APBIF		0x0b08
+#define EN_IP_MIF_SECURE_DREX1_TZ		0x0b0c
+#define EN_IP_MIF_SECURE_DREX0_TZ		0x0b10
+#define EN_IP_MIF_SECURE_INTEMEM		0x0b14
+#define CLKOUT_CMU_MIF_DIV_STAT			0x0c04
+#define DREX_FREQ_CTRL				0x1000
+#define PAUSE					0x1004
+#define DDRPHY_LOCK_CTRL			0x1008
+#define CLKOUT_CMU_MIF				0xcb00
+
+/*
+*Registers for CMU_PERI
+*/
+#define MUX_SEL_PERI				0x0200
+#define MUX_SEL_PERI1				0x0204
+#define MUX_ENABLE_PERI				0x0300
+#define MUX_ENABLE_PERI1			0x0304
+#define MUX_STAT_PERI				0x0400
+#define MUX_STAT_PERI1				0x0404
+#define MUX_IGNORE_PERI				0x0500
+#define MUX_IGNORE_PERI1			0x0504
+#define DIV_PERI				0x0600
+#define DIV_STAT_PERI				0x0700
+#define EN_PCLK_PERI0				0x0800
+#define EN_PCLK_PERI1				0x0804
+#define EN_PCLK_PERI2				0x0808
+#define EN_PCLK_PERI3				0x080c
+#define EN_PCLK_PERI_SECURE_CHIPID		0x0810
+#define EN_PCLK_PERI_SECURE_PROVKEY0		0x0814
+#define EN_PCLK_PERI_SECURE_PROVKEY1		0x0818
+#define EN_PCLK_PERI_SECURE_SECKEY		0x081c
+#define EN_PCLK_PERI_SECURE_ANTIRBKCNT		0x0820
+#define EN_PCLK_PERI_SECURE_TOP_RTC		0x0824
+#define EN_PCLK_PERI_SECURE_TZPC		0x0828
+#define EN_SCLK_PERI				0x0a00
+#define EN_SCLK_PERI_SECURE_TOP_RTC		0x0a04
+#define EN_IP_PERI0				0x0b00
+#define EN_IP_PERI1				0x0b04
+#define EN_IP_PERI2				0x0b08
+#define EN_IP_PERI_SECURE_CHIPID		0x0b0c
+#define EN_IP_PERI_SECURE_PROVKEY0		0x0b10
+#define EN_IP_PERI_SECURE_PROVKEY1		0x0b14
+#define EN_IP_PERI_SECURE_SECKEY		0x0b18
+#define EN_IP_PERI_SECURE_ANTIRBKCNT		0x0b1c
+#define EN_IP_PERI_SECURE_TOP_RTC		0x0b20
+#define EN_IP_PERI_SECURE_TZPC			0x0b24
+
+/*
+*Registers for CMU_TOP
+*/
+#define DISP_PLL_LOCK				0x0000
+#define AUD_PLL_LOCK				0x0004
+#define DISP_PLL_CON0				0x0100
+#define DISP_PLL_CON1				0x0104
+#define DISP_PLL_FDET				0x0108
+#define AUD_PLL_CON0				0x0110
+#define AUD_PLL_CON1				0x0114
+#define AUD_PLL_CON2				0x0118
+#define AUD_PLL_FDET				0x011c
+#define MUX_SEL_TOP_PLL0			0x0200
+#define MUX_SEL_TOP_MFC				0x0204
+#define MUX_SEL_TOP_G2D				0x0208
+#define MUX_SEL_TOP_GSCL			0x020c
+#define MUX_SEL_TOP_ISP10			0x0214
+#define MUX_SEL_TOP_ISP11			0x0218
+#define MUX_SEL_TOP_DISP0			0x021c
+#define MUX_SEL_TOP_DISP1			0x0220
+#define MUX_SEL_TOP_BUS				0x0224
+#define MUX_SEL_TOP_PERI0			0x0228
+#define MUX_SEL_TOP_PERI1			0x022c
+#define MUX_SEL_TOP_FSYS			0x0230
+#define MUX_ENABLE_TOP_PLL0			0x0300
+#define MUX_ENABLE_TOP_MFC			0x0304
+#define MUX_ENABLE_TOP_G2D			0x0308
+#define MUX_ENABLE_TOP_GSCL			0x030c
+#define MUX_ENABLE_TOP_ISP10			0x0314
+#define MUX_ENABLE_TOP_ISP11			0x0318
+#define MUX_ENABLE_TOP_DISP0			0x031c
+#define MUX_ENABLE_TOP_DISP1			0x0320
+#define MUX_ENABLE_TOP_BUS			0x0324
+#define MUX_ENABLE_TOP_PERI0			0x0328
+#define MUX_ENABLE_TOP_PERI1			0x032c
+#define MUX_ENABLE_TOP_FSYS			0x0330
+#define MUX_STAT_TOP_PLL0			0x0400
+#define MUX_STAT_TOP_MFC			0x0404
+#define MUX_STAT_TOP_G2D			0x0408
+#define MUX_STAT_TOP_GSCL			0x040c
+#define MUX_STAT_TOP_ISP10			0x0414
+#define MUX_STAT_TOP_ISP11			0x0418
+#define MUX_STAT_TOP_DISP0			0x041c
+#define MUX_STAT_TOP_DISP1			0x0420
+#define MUX_STAT_TOP_BUS			0x0424
+#define MUX_STAT_TOP_PERI0			0x0428
+#define MUX_STAT_TOP_PERI1			0x042c
+#define MUX_STAT_TOP_FSYS			0x0430
+#define MUX_IGNORE_TOP_PLL0			0x0500
+#define MUX_IGNORE_TOP_MFC			0x0504
+#define MUX_IGNORE_TOP_G2D			0x0508
+#define MUX_IGNORE_TOP_GSCL			0x050c
+#define MUX_IGNORE_TOP_ISP10			0x0514
+#define MUX_IGNORE_TOP_ISP11			0x0518
+#define MUX_IGNORE_TOP_DISP0			0x051c
+#define MUX_IGNORE_TOP_DISP1			0x0520
+#define MUX_IGNORE_TOP_BUS			0x0524
+#define MUX_IGNORE_TOP_PERI0			0x0528
+#define MUX_IGNORE_TOP_PERI1			0x052c
+#define MUX_IGNORE_TOP_FSYS			0x0530
+#define DIV_TOP_G2D_MFC				0x0600
+#define DIV_TOP_GSCL_ISP0			0x0604
+#define DIV_TOP_ISP10				0x0608
+#define DIV_TOP_ISP11				0x060c
+#define DIV_TOP_DISP				0x0610
+#define DIV_TOP_BUS				0x0614
+#define DIV_TOP_PERI0				0x0618
+#define DIV_TOP_PERI1				0x061c
+#define DIV_TOP_PERI2				0x0620
+#define DIV_TOP_FSYS0				0x0624
+#define DIV_TOP_FSYS1				0x0628
+#define DIV_TOP_HPM				0x062c
+#define DIV_TOP_PLL_FDET			0x0630
+#define DIV_STAT_TOP_G2D_MFC			0x0700
+#define DIV_STAT_TOP_GSCL_ISP0			0x0704
+#define DIV_STAT_TOP_ISP10			0x0708
+#define DIV_STAT_TOP_ISP11			0x070c
+#define DIV_STAT_TOP_DISP			0x0710
+#define DIV_STAT_TOP_BUS			0x0714
+#define DIV_STAT_TOP_PERI0			0x0718
+#define DIV_STAT_TOP_PERI1			0x071c
+#define DIV_STAT_TOP_PERI2			0x0720
+#define DIV_STAT_TOP_FSYS0			0x0724
+#define DIV_STAT_TOP_FSYS1			0x0728
+#define DIV_STAT_TOP_HPM			0x072c
+#define DIV_STAT_TOP_PLL_FDET			0x0730
+#define EN_ACLK_TOP				0x0800
+#define EN_SCLK_TOP				0x0a00
+#define EN_IP_TOP				0x0b00
+#define CLKOUT_CMU_TOP				0x0c00
+#define CLKOUT_CMU_TOP_DIV_STAT			0x0c04
+
+#endif /*__CLK_EXYNOS5260_H */
+

drivers/clk/samsung/clk-exynos5420.c

@@ -27,18 +27,24 @@
 #define DIV_CPU1		0x504
 #define GATE_BUS_CPU		0x700
 #define GATE_SCLK_CPU		0x800
+#define CLKOUT_CMU_CPU		0xa00
+#define GATE_IP_G2D		0x8800
 #define CPLL_LOCK		0x10020
 #define DPLL_LOCK		0x10030
 #define EPLL_LOCK		0x10040
 #define RPLL_LOCK		0x10050
 #define IPLL_LOCK		0x10060
 #define SPLL_LOCK		0x10070
-#define VPLL_LOCK		0x10070
+#define VPLL_LOCK		0x10080
 #define MPLL_LOCK		0x10090
 #define CPLL_CON0		0x10120
 #define DPLL_CON0		0x10128
 #define EPLL_CON0		0x10130
+#define EPLL_CON1		0x10134
+#define EPLL_CON2		0x10138
 #define RPLL_CON0		0x10140
+#define RPLL_CON1		0x10144
+#define RPLL_CON2		0x10148
 #define IPLL_CON0		0x10150
 #define SPLL_CON0		0x10160
 #define VPLL_CON0		0x10170
@@ -51,21 +57,31 @@
 #define SRC_TOP5		0x10214
 #define SRC_TOP6		0x10218
 #define SRC_TOP7		0x1021c
+#define SRC_TOP8		0x10220 /* 5800 specific */
+#define SRC_TOP9		0x10224 /* 5800 specific */
 #define SRC_DISP10		0x1022c
 #define SRC_MAU			0x10240
 #define SRC_FSYS		0x10244
 #define SRC_PERIC0		0x10250
 #define SRC_PERIC1		0x10254
+#define SRC_ISP			0x10270
+#define SRC_CAM			0x10274 /* 5800 specific */
 #define SRC_TOP10		0x10280
 #define SRC_TOP11		0x10284
 #define SRC_TOP12		0x10288
-#define	SRC_MASK_DISP10		0x1032c
+#define SRC_TOP13		0x1028c /* 5800 specific */
+#define SRC_MASK_TOP2		0x10308
+#define SRC_MASK_TOP7		0x1031c
+#define SRC_MASK_DISP10		0x1032c
+#define SRC_MASK_MAU		0x10334
 #define SRC_MASK_FSYS		0x10340
 #define SRC_MASK_PERIC0		0x10350
 #define SRC_MASK_PERIC1		0x10354
 #define DIV_TOP0		0x10500
 #define DIV_TOP1		0x10504
 #define DIV_TOP2		0x10508
+#define DIV_TOP8		0x10520 /* 5800 specific */
+#define DIV_TOP9		0x10524 /* 5800 specific */
 #define DIV_DISP10		0x1052c
 #define DIV_MAU			0x10544
 #define DIV_FSYS0		0x10548
@@ -76,54 +92,82 @@
 #define DIV_PERIC2		0x10560
 #define DIV_PERIC3		0x10564
 #define DIV_PERIC4		0x10568
+#define DIV_CAM			0x10574 /* 5800 specific */
+#define SCLK_DIV_ISP0		0x10580
+#define SCLK_DIV_ISP1		0x10584
+#define DIV2_RATIO0		0x10590
+#define DIV4_RATIO		0x105a0
 #define GATE_BUS_TOP		0x10700
+#define GATE_BUS_GEN		0x1073c
 #define GATE_BUS_FSYS0		0x10740
+#define GATE_BUS_FSYS2		0x10748
 #define GATE_BUS_PERIC		0x10750
 #define GATE_BUS_PERIC1		0x10754
 #define GATE_BUS_PERIS0		0x10760
 #define GATE_BUS_PERIS1		0x10764
+#define GATE_BUS_NOC		0x10770
+#define GATE_TOP_SCLK_ISP	0x10870
 #define GATE_IP_GSCL0		0x10910
 #define GATE_IP_GSCL1		0x10920
+#define GATE_IP_CAM		0x10924 /* 5800 specific */
 #define GATE_IP_MFC		0x1092c
 #define GATE_IP_DISP1		0x10928
 #define GATE_IP_G3D		0x10930
 #define GATE_IP_GEN		0x10934
+#define GATE_IP_FSYS		0x10944
+#define GATE_IP_PERIC		0x10950
+#define GATE_IP_PERIS		0x10960
 #define GATE_IP_MSCL		0x10970
 #define GATE_TOP_SCLK_GSCL	0x10820
 #define GATE_TOP_SCLK_DISP1	0x10828
 #define GATE_TOP_SCLK_MAU	0x1083c
 #define GATE_TOP_SCLK_FSYS	0x10840
 #define GATE_TOP_SCLK_PERIC	0x10850
+#define TOP_SPARE2		0x10b08
 #define BPLL_LOCK		0x20010
 #define BPLL_CON0		0x20110
-#define SRC_CDREX		0x20200
 #define KPLL_LOCK		0x28000
 #define KPLL_CON0		0x28100
 #define SRC_KFC			0x28200
 #define DIV_KFC0		0x28500
 
+/* Exynos5x SoC type */
+enum exynos5x_soc {
+	EXYNOS5420,
+	EXYNOS5800,
+};
+
 /* list of PLLs */
-enum exynos5420_plls {
+enum exynos5x_plls {
 	apll, cpll, dpll, epll, rpll, ipll, spll, vpll, mpll,
 	bpll, kpll,
 	nr_plls			/* number of PLLs */
 };
 
 static void __iomem *reg_base;
+static enum exynos5x_soc exynos5x_soc;
 
 #ifdef CONFIG_PM_SLEEP
-static struct samsung_clk_reg_dump *exynos5420_save;
+static struct samsung_clk_reg_dump *exynos5x_save;
+static struct samsung_clk_reg_dump *exynos5800_save;
 
 /*
  * list of controller registers to be saved and restored during a
  * suspend/resume cycle.
  */
-static unsigned long exynos5420_clk_regs[] __initdata = {
+static unsigned long exynos5x_clk_regs[] __initdata = {
 	SRC_CPU,
 	DIV_CPU0,
 	DIV_CPU1,
 	GATE_BUS_CPU,
 	GATE_SCLK_CPU,
+	CLKOUT_CMU_CPU,
+	EPLL_CON0,
+	EPLL_CON1,
+	EPLL_CON2,
+	RPLL_CON0,
+	RPLL_CON1,
+	RPLL_CON2,
 	SRC_TOP0,
 	SRC_TOP1,
 	SRC_TOP2,
@@ -140,10 +184,13 @@ static unsigned long exynos5420_clk_regs[] __initdata = {
 	SRC_TOP10,
 	SRC_TOP11,
 	SRC_TOP12,
+	SRC_MASK_TOP2,
+	SRC_MASK_TOP7,
 	SRC_MASK_DISP10,
 	SRC_MASK_FSYS,
 	SRC_MASK_PERIC0,
 	SRC_MASK_PERIC1,
+	SRC_ISP,
 	DIV_TOP0,
 	DIV_TOP1,
 	DIV_TOP2,
@@ -157,41 +204,71 @@ static unsigned long exynos5420_clk_regs[] __initdata = {
 	DIV_PERIC2,
 	DIV_PERIC3,
 	DIV_PERIC4,
+	SCLK_DIV_ISP0,
+	SCLK_DIV_ISP1,
+	DIV2_RATIO0,
+	DIV4_RATIO,
 	GATE_BUS_TOP,
+	GATE_BUS_GEN,
 	GATE_BUS_FSYS0,
+	GATE_BUS_FSYS2,
 	GATE_BUS_PERIC,
 	GATE_BUS_PERIC1,
 	GATE_BUS_PERIS0,
 	GATE_BUS_PERIS1,
+	GATE_BUS_NOC,
+	GATE_TOP_SCLK_ISP,
 	GATE_IP_GSCL0,
 	GATE_IP_GSCL1,
 	GATE_IP_MFC,
 	GATE_IP_DISP1,
 	GATE_IP_G3D,
 	GATE_IP_GEN,
+	GATE_IP_FSYS,
+	GATE_IP_PERIC,
+	GATE_IP_PERIS,
 	GATE_IP_MSCL,
 	GATE_TOP_SCLK_GSCL,
 	GATE_TOP_SCLK_DISP1,
 	GATE_TOP_SCLK_MAU,
 	GATE_TOP_SCLK_FSYS,
 	GATE_TOP_SCLK_PERIC,
-	SRC_CDREX,
+	TOP_SPARE2,
 	SRC_KFC,
 	DIV_KFC0,
 };
 
+static unsigned long exynos5800_clk_regs[] __initdata = {
+	SRC_TOP8,
+	SRC_TOP9,
+	SRC_CAM,
+	SRC_TOP1,
+	DIV_TOP8,
+	DIV_TOP9,
+	DIV_CAM,
+	GATE_IP_CAM,
+};
+
 static int exynos5420_clk_suspend(void)
 {
-	samsung_clk_save(reg_base, exynos5420_save,
-				ARRAY_SIZE(exynos5420_clk_regs));
+	samsung_clk_save(reg_base, exynos5x_save,
+				ARRAY_SIZE(exynos5x_clk_regs));
+
+	if (exynos5x_soc == EXYNOS5800)
+		samsung_clk_save(reg_base, exynos5800_save,
+				ARRAY_SIZE(exynos5800_clk_regs));
 
 	return 0;
 }
 
 static void exynos5420_clk_resume(void)
 {
-	samsung_clk_restore(reg_base, exynos5420_save,
-				ARRAY_SIZE(exynos5420_clk_regs));
+	samsung_clk_restore(reg_base, exynos5x_save,
+				ARRAY_SIZE(exynos5x_clk_regs));
+
+	if (exynos5x_soc == EXYNOS5800)
+		samsung_clk_restore(reg_base, exynos5800_save,
+				ARRAY_SIZE(exynos5800_clk_regs));
 }
 
 static struct syscore_ops exynos5420_clk_syscore_ops = {
@@ -201,108 +278,183 @@ static struct syscore_ops exynos5420_clk_syscore_ops = {
 
 static void exynos5420_clk_sleep_init(void)
 {
-	exynos5420_save = samsung_clk_alloc_reg_dump(exynos5420_clk_regs,
-					ARRAY_SIZE(exynos5420_clk_regs));
-	if (!exynos5420_save) {
+	exynos5x_save = samsung_clk_alloc_reg_dump(exynos5x_clk_regs,
+					ARRAY_SIZE(exynos5x_clk_regs));
+	if (!exynos5x_save) {
 		pr_warn("%s: failed to allocate sleep save data, no sleep support!\n",
 			__func__);
 		return;
 	}
 
+	if (exynos5x_soc == EXYNOS5800) {
+		exynos5800_save =
+			samsung_clk_alloc_reg_dump(exynos5800_clk_regs,
+					ARRAY_SIZE(exynos5800_clk_regs));
+		if (!exynos5800_save)
+			goto err_soc;
+	}
+
 	register_syscore_ops(&exynos5420_clk_syscore_ops);
+	return;
+err_soc:
+	kfree(exynos5x_save);
+	pr_warn("%s: failed to allocate sleep save data, no sleep support!\n",
+		__func__);
+	return;
 }
 #else
 static void exynos5420_clk_sleep_init(void) {}
 #endif
 
 /* list of all parent clocks */
-PNAME(mspll_cpu_p)	= { "sclk_cpll", "sclk_dpll",
-				"sclk_mpll", "sclk_spll" };
-PNAME(cpu_p)		= { "mout_apll" , "mout_mspll_cpu" };
-PNAME(kfc_p)		= { "mout_kpll" , "mout_mspll_kfc" };
-PNAME(apll_p)		= { "fin_pll", "fout_apll", };
-PNAME(bpll_p)		= { "fin_pll", "fout_bpll", };
-PNAME(cpll_p)		= { "fin_pll", "fout_cpll", };
-PNAME(dpll_p)		= { "fin_pll", "fout_dpll", };
-PNAME(epll_p)		= { "fin_pll", "fout_epll", };
-PNAME(ipll_p)		= { "fin_pll", "fout_ipll", };
-PNAME(kpll_p)		= { "fin_pll", "fout_kpll", };
-PNAME(mpll_p)		= { "fin_pll", "fout_mpll", };
-PNAME(rpll_p)		= { "fin_pll", "fout_rpll", };
-PNAME(spll_p)		= { "fin_pll", "fout_spll", };
-PNAME(vpll_p)		= { "fin_pll", "fout_vpll", };
-
-PNAME(group1_p)		= { "sclk_cpll", "sclk_dpll", "sclk_mpll" };
-PNAME(group2_p)		= { "fin_pll", "sclk_cpll", "sclk_dpll", "sclk_mpll",
-			  "sclk_spll", "sclk_ipll", "sclk_epll", "sclk_rpll" };
-PNAME(group3_p)		= { "sclk_rpll", "sclk_spll" };
-PNAME(group4_p)		= { "sclk_ipll", "sclk_dpll", "sclk_mpll" };
-PNAME(group5_p)		= { "sclk_vpll", "sclk_dpll" };
-
-PNAME(sw_aclk66_p)	= { "dout_aclk66", "sclk_spll" };
-PNAME(aclk66_peric_p)	= { "fin_pll", "mout_sw_aclk66" };
-
-PNAME(sw_aclk200_fsys_p) = { "dout_aclk200_fsys", "sclk_spll"};
-PNAME(user_aclk200_fsys_p)	= { "fin_pll", "mout_sw_aclk200_fsys" };
-
-PNAME(sw_aclk200_fsys2_p) = { "dout_aclk200_fsys2", "sclk_spll"};
-PNAME(user_aclk200_fsys2_p)	= { "fin_pll", "mout_sw_aclk200_fsys2" };
-
-PNAME(sw_aclk200_p) = { "dout_aclk200", "sclk_spll"};
-PNAME(aclk200_disp1_p)	= { "fin_pll", "mout_sw_aclk200" };
-
-PNAME(sw_aclk400_mscl_p) = { "dout_aclk400_mscl", "sclk_spll"};
-PNAME(user_aclk400_mscl_p)	= { "fin_pll", "mout_sw_aclk400_mscl" };
-
-PNAME(sw_aclk333_p) = { "dout_aclk333", "sclk_spll"};
-PNAME(user_aclk333_p)	= { "fin_pll", "mout_sw_aclk333" };
-
-PNAME(sw_aclk166_p) = { "dout_aclk166", "sclk_spll"};
-PNAME(user_aclk166_p)	= { "fin_pll", "mout_sw_aclk166" };
-
-PNAME(sw_aclk266_p) = { "dout_aclk266", "sclk_spll"};
-PNAME(user_aclk266_p)	= { "fin_pll", "mout_sw_aclk266" };
-
-PNAME(sw_aclk333_432_gscl_p) = { "dout_aclk333_432_gscl", "sclk_spll"};
-PNAME(user_aclk333_432_gscl_p)	= { "fin_pll", "mout_sw_aclk333_432_gscl" };
-
-PNAME(sw_aclk300_gscl_p) = { "dout_aclk300_gscl", "sclk_spll"};
-PNAME(user_aclk300_gscl_p)	= { "fin_pll", "mout_sw_aclk300_gscl" };
-
-PNAME(sw_aclk300_disp1_p) = { "dout_aclk300_disp1", "sclk_spll"};
-PNAME(user_aclk300_disp1_p)	= { "fin_pll", "mout_sw_aclk300_disp1" };
-
-PNAME(sw_aclk300_jpeg_p) = { "dout_aclk300_jpeg", "sclk_spll"};
-PNAME(user_aclk300_jpeg_p)	= { "fin_pll", "mout_sw_aclk300_jpeg" };
-
-PNAME(sw_aclk_g3d_p) = { "dout_aclk_g3d", "sclk_spll"};
-PNAME(user_aclk_g3d_p)	= { "fin_pll", "mout_sw_aclk_g3d" };
-
-PNAME(sw_aclk266_g2d_p) = { "dout_aclk266_g2d", "sclk_spll"};
-PNAME(user_aclk266_g2d_p)	= { "fin_pll", "mout_sw_aclk266_g2d" };
-
-PNAME(sw_aclk333_g2d_p) = { "dout_aclk333_g2d", "sclk_spll"};
-PNAME(user_aclk333_g2d_p)	= { "fin_pll", "mout_sw_aclk333_g2d" };
-
-PNAME(audio0_p)	= { "fin_pll", "cdclk0", "sclk_dpll", "sclk_mpll",
-		  "sclk_spll", "sclk_ipll", "sclk_epll", "sclk_rpll" };
-PNAME(audio1_p)	= { "fin_pll", "cdclk1", "sclk_dpll", "sclk_mpll",
-		  "sclk_spll", "sclk_ipll", "sclk_epll", "sclk_rpll" };
-PNAME(audio2_p)	= { "fin_pll", "cdclk2", "sclk_dpll", "sclk_mpll",
-		  "sclk_spll", "sclk_ipll", "sclk_epll", "sclk_rpll" };
-PNAME(spdif_p)	= { "fin_pll", "dout_audio0", "dout_audio1", "dout_audio2",
-		  "spdif_extclk", "sclk_ipll", "sclk_epll", "sclk_rpll" };
-PNAME(hdmi_p)	= { "dout_hdmi_pixel", "sclk_hdmiphy" };
-PNAME(maudio0_p)	= { "fin_pll", "maudio_clk", "sclk_dpll", "sclk_mpll",
-			  "sclk_spll", "sclk_ipll", "sclk_epll", "sclk_rpll" };
+PNAME(mout_mspll_cpu_p) = {"mout_sclk_cpll", "mout_sclk_dpll",
+				"mout_sclk_mpll", "mout_sclk_spll"};
+PNAME(mout_cpu_p) = {"mout_apll" , "mout_mspll_cpu"};
+PNAME(mout_kfc_p) = {"mout_kpll" , "mout_mspll_kfc"};
+PNAME(mout_apll_p) = {"fin_pll", "fout_apll"};
+PNAME(mout_bpll_p) = {"fin_pll", "fout_bpll"};
+PNAME(mout_cpll_p) = {"fin_pll", "fout_cpll"};
+PNAME(mout_dpll_p) = {"fin_pll", "fout_dpll"};
+PNAME(mout_epll_p) = {"fin_pll", "fout_epll"};
+PNAME(mout_ipll_p) = {"fin_pll", "fout_ipll"};
+PNAME(mout_kpll_p) = {"fin_pll", "fout_kpll"};
+PNAME(mout_mpll_p) = {"fin_pll", "fout_mpll"};
+PNAME(mout_rpll_p) = {"fin_pll", "fout_rpll"};
+PNAME(mout_spll_p) = {"fin_pll", "fout_spll"};
+PNAME(mout_vpll_p) = {"fin_pll", "fout_vpll"};
+
+PNAME(mout_group1_p) = {"mout_sclk_cpll", "mout_sclk_dpll",
+					"mout_sclk_mpll"};
+PNAME(mout_group2_p) = {"fin_pll", "mout_sclk_cpll",
+			"mout_sclk_dpll", "mout_sclk_mpll", "mout_sclk_spll",
+			"mout_sclk_ipll", "mout_sclk_epll", "mout_sclk_rpll"};
+PNAME(mout_group3_p) = {"mout_sclk_rpll", "mout_sclk_spll"};
+PNAME(mout_group4_p) = {"mout_sclk_ipll", "mout_sclk_dpll", "mout_sclk_mpll"};
+PNAME(mout_group5_p) = {"mout_sclk_vpll", "mout_sclk_dpll"};
+
+PNAME(mout_fimd1_final_p) = {"mout_fimd1", "mout_fimd1_opt"};
+PNAME(mout_sw_aclk66_p)	= {"dout_aclk66", "mout_sclk_spll"};
+PNAME(mout_user_aclk66_peric_p)	= { "fin_pll", "mout_sw_aclk66"};
+PNAME(mout_user_pclk66_gpio_p) = {"mout_sw_aclk66", "ff_sw_aclk66"};
+
+PNAME(mout_sw_aclk200_fsys_p) = {"dout_aclk200_fsys", "mout_sclk_spll"};
+PNAME(mout_sw_pclk200_fsys_p) = {"dout_pclk200_fsys", "mout_sclk_spll"};
+PNAME(mout_user_pclk200_fsys_p)	= {"fin_pll", "mout_sw_pclk200_fsys"};
+PNAME(mout_user_aclk200_fsys_p)	= {"fin_pll", "mout_sw_aclk200_fsys"};
+
+PNAME(mout_sw_aclk200_fsys2_p) = {"dout_aclk200_fsys2", "mout_sclk_spll"};
+PNAME(mout_user_aclk200_fsys2_p) = {"fin_pll", "mout_sw_aclk200_fsys2"};
+PNAME(mout_sw_aclk100_noc_p) = {"dout_aclk100_noc", "mout_sclk_spll"};
+PNAME(mout_user_aclk100_noc_p) = {"fin_pll", "mout_sw_aclk100_noc"};
+
+PNAME(mout_sw_aclk400_wcore_p) = {"dout_aclk400_wcore", "mout_sclk_spll"};
+PNAME(mout_aclk400_wcore_bpll_p) = {"mout_aclk400_wcore", "sclk_bpll"};
+PNAME(mout_user_aclk400_wcore_p) = {"fin_pll", "mout_sw_aclk400_wcore"};
+
+PNAME(mout_sw_aclk400_isp_p) = {"dout_aclk400_isp", "mout_sclk_spll"};
+PNAME(mout_user_aclk400_isp_p) = {"fin_pll", "mout_sw_aclk400_isp"};
+
+PNAME(mout_sw_aclk333_432_isp0_p) = {"dout_aclk333_432_isp0",
+					"mout_sclk_spll"};
+PNAME(mout_user_aclk333_432_isp0_p) = {"fin_pll", "mout_sw_aclk333_432_isp0"};
+
+PNAME(mout_sw_aclk333_432_isp_p) = {"dout_aclk333_432_isp", "mout_sclk_spll"};
+PNAME(mout_user_aclk333_432_isp_p) = {"fin_pll", "mout_sw_aclk333_432_isp"};
+
+PNAME(mout_sw_aclk200_p) = {"dout_aclk200", "mout_sclk_spll"};
+PNAME(mout_user_aclk200_disp1_p) = {"fin_pll", "mout_sw_aclk200"};
+
+PNAME(mout_sw_aclk400_mscl_p) = {"dout_aclk400_mscl", "mout_sclk_spll"};
+PNAME(mout_user_aclk400_mscl_p)	= {"fin_pll", "mout_sw_aclk400_mscl"};
+
+PNAME(mout_sw_aclk333_p) = {"dout_aclk333", "mout_sclk_spll"};
+PNAME(mout_user_aclk333_p) = {"fin_pll", "mout_sw_aclk333"};
+
+PNAME(mout_sw_aclk166_p) = {"dout_aclk166", "mout_sclk_spll"};
+PNAME(mout_user_aclk166_p) = {"fin_pll", "mout_sw_aclk166"};
+
+PNAME(mout_sw_aclk266_p) = {"dout_aclk266", "mout_sclk_spll"};
+PNAME(mout_user_aclk266_p) = {"fin_pll", "mout_sw_aclk266"};
+PNAME(mout_user_aclk266_isp_p) = {"fin_pll", "mout_sw_aclk266"};
+
+PNAME(mout_sw_aclk333_432_gscl_p) = {"dout_aclk333_432_gscl", "mout_sclk_spll"};
+PNAME(mout_user_aclk333_432_gscl_p) = {"fin_pll", "mout_sw_aclk333_432_gscl"};
+
+PNAME(mout_sw_aclk300_gscl_p) = {"dout_aclk300_gscl", "mout_sclk_spll"};
+PNAME(mout_user_aclk300_gscl_p)	= {"fin_pll", "mout_sw_aclk300_gscl"};
+
+PNAME(mout_sw_aclk300_disp1_p) = {"dout_aclk300_disp1", "mout_sclk_spll"};
+PNAME(mout_sw_aclk400_disp1_p) = {"dout_aclk400_disp1", "mout_sclk_spll"};
+PNAME(mout_user_aclk300_disp1_p) = {"fin_pll", "mout_sw_aclk300_disp1"};
+PNAME(mout_user_aclk400_disp1_p) = {"fin_pll", "mout_sw_aclk400_disp1"};
+
+PNAME(mout_sw_aclk300_jpeg_p) = {"dout_aclk300_jpeg", "mout_sclk_spll"};
+PNAME(mout_user_aclk300_jpeg_p) = {"fin_pll", "mout_sw_aclk300_jpeg"};
+
+PNAME(mout_sw_aclk_g3d_p) = {"dout_aclk_g3d", "mout_sclk_spll"};
+PNAME(mout_user_aclk_g3d_p) = {"fin_pll", "mout_sw_aclk_g3d"};
+
+PNAME(mout_sw_aclk266_g2d_p) = {"dout_aclk266_g2d", "mout_sclk_spll"};
+PNAME(mout_user_aclk266_g2d_p) = {"fin_pll", "mout_sw_aclk266_g2d"};
+
+PNAME(mout_sw_aclk333_g2d_p) = {"dout_aclk333_g2d", "mout_sclk_spll"};
+PNAME(mout_user_aclk333_g2d_p) = {"fin_pll", "mout_sw_aclk333_g2d"};
+
+PNAME(mout_audio0_p) = {"fin_pll", "cdclk0", "mout_sclk_dpll",
+			"mout_sclk_mpll", "mout_sclk_spll", "mout_sclk_ipll",
+			"mout_sclk_epll", "mout_sclk_rpll"};
+PNAME(mout_audio1_p) = {"fin_pll", "cdclk1", "mout_sclk_dpll",
+			"mout_sclk_mpll", "mout_sclk_spll", "mout_sclk_ipll",
+			"mout_sclk_epll", "mout_sclk_rpll"};
+PNAME(mout_audio2_p) = {"fin_pll", "cdclk2", "mout_sclk_dpll",
+			"mout_sclk_mpll", "mout_sclk_spll", "mout_sclk_ipll",
+			"mout_sclk_epll", "mout_sclk_rpll"};
+PNAME(mout_spdif_p) = {"fin_pll", "dout_audio0", "dout_audio1",
+			"dout_audio2", "spdif_extclk", "mout_sclk_ipll",
+			"mout_sclk_epll", "mout_sclk_rpll"};
+PNAME(mout_hdmi_p) = {"dout_hdmi_pixel", "sclk_hdmiphy"};
+PNAME(mout_maudio0_p) = {"fin_pll", "maudio_clk", "mout_sclk_dpll",
+			 "mout_sclk_mpll", "mout_sclk_spll", "mout_sclk_ipll",
+			 "mout_sclk_epll", "mout_sclk_rpll"};
+PNAME(mout_mau_epll_clk_p) = {"mout_sclk_epll", "mout_sclk_dpll",
+				"mout_sclk_mpll", "mout_sclk_spll"};
+/* List of parents specific to exynos5800 */
+PNAME(mout_epll2_5800_p)	= { "mout_sclk_epll", "ff_dout_epll2" };
+PNAME(mout_group1_5800_p)	= { "mout_sclk_cpll", "mout_sclk_dpll",
+				"mout_sclk_mpll", "ff_dout_spll2" };
+PNAME(mout_group2_5800_p)	= { "mout_sclk_cpll", "mout_sclk_dpll",
+					"mout_sclk_mpll", "ff_dout_spll2",
+					"mout_epll2", "mout_sclk_ipll" };
+PNAME(mout_group3_5800_p)	= { "mout_sclk_cpll", "mout_sclk_dpll",
+					"mout_sclk_mpll", "ff_dout_spll2",
+					"mout_epll2" };
+PNAME(mout_group5_5800_p)	= { "mout_sclk_cpll", "mout_sclk_dpll",
+					"mout_sclk_mpll", "mout_sclk_spll" };
+PNAME(mout_group6_5800_p)	= { "mout_sclk_ipll", "mout_sclk_dpll",
+				"mout_sclk_mpll", "ff_dout_spll2" };
+PNAME(mout_group7_5800_p)	= { "mout_sclk_cpll", "mout_sclk_dpll",
+					"mout_sclk_mpll", "mout_sclk_spll",
+					"mout_epll2", "mout_sclk_ipll" };
+PNAME(mout_mau_epll_clk_5800_p)	= { "mout_sclk_epll", "mout_sclk_dpll",
+					"mout_sclk_mpll",
+					"ff_dout_spll2" };
+PNAME(mout_group8_5800_p)	= { "dout_aclk432_scaler", "dout_sclk_sw" };
+PNAME(mout_group9_5800_p)	= { "dout_osc_div", "mout_sw_aclk432_scaler" };
+PNAME(mout_group10_5800_p)	= { "dout_aclk432_cam", "dout_sclk_sw" };
+PNAME(mout_group11_5800_p)	= { "dout_osc_div", "mout_sw_aclk432_cam" };
+PNAME(mout_group12_5800_p)	= { "dout_aclkfl1_550_cam", "dout_sclk_sw" };
+PNAME(mout_group13_5800_p)	= { "dout_osc_div", "mout_sw_aclkfl1_550_cam" };
+PNAME(mout_group14_5800_p)	= { "dout_aclk550_cam", "dout_sclk_sw" };
+PNAME(mout_group15_5800_p)	= { "dout_osc_div", "mout_sw_aclk550_cam" };
 
 /* fixed rate clocks generated outside the soc */
-static struct samsung_fixed_rate_clock exynos5420_fixed_rate_ext_clks[] __initdata = {
+static struct samsung_fixed_rate_clock
+		exynos5x_fixed_rate_ext_clks[] __initdata = {
 	FRATE(CLK_FIN_PLL, "fin_pll", NULL, CLK_IS_ROOT, 0),
 };
 
 /* fixed rate clocks generated inside the soc */
-static struct samsung_fixed_rate_clock exynos5420_fixed_rate_clks[] __initdata = {
+static struct samsung_fixed_rate_clock exynos5x_fixed_rate_clks[] __initdata = {
 	FRATE(CLK_SCLK_HDMIPHY, "sclk_hdmiphy", NULL, CLK_IS_ROOT, 24000000),
 	FRATE(0, "sclk_pwi", NULL, CLK_IS_ROOT, 24000000),
 	FRATE(0, "sclk_usbh20", NULL, CLK_IS_ROOT, 48000000),
@@ -310,146 +462,309 @@ static struct samsung_fixed_rate_clock exynos5420_fixed_rate_clks[] __initdata =
 	FRATE(0, "sclk_usbh20_scan_clk", NULL, CLK_IS_ROOT, 480000000),
 };
 
-static struct samsung_fixed_factor_clock exynos5420_fixed_factor_clks[] __initdata = {
-	FFACTOR(0, "sclk_hsic_12m", "fin_pll", 1, 2, 0),
+static struct samsung_fixed_factor_clock
+		exynos5x_fixed_factor_clks[] __initdata = {
+	FFACTOR(0, "ff_hsic_12m", "fin_pll", 1, 2, 0),
+	FFACTOR(0, "ff_sw_aclk66", "mout_sw_aclk66", 1, 2, 0),
 };
 
-static struct samsung_mux_clock exynos5420_mux_clks[] __initdata = {
-	MUX(0, "mout_mspll_kfc", mspll_cpu_p, SRC_TOP7, 8, 2),
-	MUX(0, "mout_mspll_cpu", mspll_cpu_p, SRC_TOP7, 12, 2),
-	MUX(0, "mout_apll", apll_p, SRC_CPU, 0, 1),
-	MUX(0, "mout_cpu", cpu_p, SRC_CPU, 16, 1),
-	MUX(0, "mout_kpll", kpll_p, SRC_KFC, 0, 1),
-	MUX(0, "mout_cpu_kfc", kfc_p, SRC_KFC, 16, 1),
-
-	MUX(0, "sclk_bpll", bpll_p, SRC_CDREX, 0, 1),
-
-	MUX_A(0, "mout_aclk400_mscl", group1_p,
-			SRC_TOP0, 4, 2, "aclk400_mscl"),
-	MUX(0, "mout_aclk200", group1_p, SRC_TOP0, 8, 2),
-	MUX(0, "mout_aclk200_fsys2", group1_p, SRC_TOP0, 12, 2),
-	MUX(0, "mout_aclk200_fsys", group1_p, SRC_TOP0, 28, 2),
-
-	MUX(0, "mout_aclk333_432_gscl", group4_p, SRC_TOP1, 0, 2),
-	MUX(0, "mout_aclk66", group1_p, SRC_TOP1, 8, 2),
-	MUX(0, "mout_aclk266", group1_p, SRC_TOP1, 20, 2),
-	MUX(0, "mout_aclk166", group1_p, SRC_TOP1, 24, 2),
-	MUX(0, "mout_aclk333", group1_p, SRC_TOP1, 28, 2),
-
-	MUX(0, "mout_aclk333_g2d", group1_p, SRC_TOP2, 8, 2),
-	MUX(0, "mout_aclk266_g2d", group1_p, SRC_TOP2, 12, 2),
-	MUX(0, "mout_aclk_g3d", group5_p, SRC_TOP2, 16, 1),
-	MUX(0, "mout_aclk300_jpeg", group1_p, SRC_TOP2, 20, 2),
-	MUX(0, "mout_aclk300_disp1", group1_p, SRC_TOP2, 24, 2),
-	MUX(0, "mout_aclk300_gscl", group1_p, SRC_TOP2, 28, 2),
-
-	MUX(0, "mout_user_aclk400_mscl", user_aclk400_mscl_p,
+static struct samsung_fixed_factor_clock
+		exynos5800_fixed_factor_clks[] __initdata = {
+	FFACTOR(0, "ff_dout_epll2", "mout_sclk_epll", 1, 2, 0),
+	FFACTOR(0, "ff_dout_spll2", "mout_sclk_spll", 1, 2, 0),
+};
+
+struct samsung_mux_clock exynos5800_mux_clks[] __initdata = {
+	MUX(0, "mout_aclk400_isp", mout_group3_5800_p, SRC_TOP0, 0, 3),
+	MUX(0, "mout_aclk400_mscl", mout_group3_5800_p, SRC_TOP0, 4, 3),
+	MUX(0, "mout_aclk400_wcore", mout_group2_5800_p, SRC_TOP0, 16, 3),
+	MUX(0, "mout_aclk100_noc", mout_group1_5800_p, SRC_TOP0, 20, 2),
+
+	MUX(0, "mout_aclk333_432_gscl", mout_group6_5800_p, SRC_TOP1, 0, 2),
+	MUX(0, "mout_aclk333_432_isp", mout_group6_5800_p, SRC_TOP1, 4, 2),
+	MUX(0, "mout_aclk333_432_isp0", mout_group6_5800_p, SRC_TOP1, 12, 2),
+	MUX(0, "mout_aclk266", mout_group5_5800_p, SRC_TOP1, 20, 2),
+	MUX(0, "mout_aclk333", mout_group1_5800_p, SRC_TOP1, 28, 2),
+
+	MUX(0, "mout_aclk400_disp1", mout_group7_5800_p, SRC_TOP2, 4, 3),
+	MUX(0, "mout_aclk333_g2d", mout_group5_5800_p, SRC_TOP2, 8, 2),
+	MUX(0, "mout_aclk266_g2d", mout_group5_5800_p, SRC_TOP2, 12, 2),
+	MUX(0, "mout_aclk300_jpeg", mout_group5_5800_p, SRC_TOP2, 20, 2),
+	MUX(0, "mout_aclk300_disp1", mout_group5_5800_p, SRC_TOP2, 24, 2),
+	MUX(0, "mout_aclk300_gscl", mout_group5_5800_p, SRC_TOP2, 28, 2),
+
+	MUX(0, "mout_mau_epll_clk", mout_mau_epll_clk_5800_p, SRC_TOP7,
+			20, 2),
+	MUX(0, "sclk_bpll", mout_bpll_p, SRC_TOP7, 24, 1),
+	MUX(0, "mout_epll2", mout_epll2_5800_p, SRC_TOP7, 28, 1),
+
+	MUX(0, "mout_aclk550_cam", mout_group3_5800_p, SRC_TOP8, 16, 3),
+	MUX(0, "mout_aclkfl1_550_cam", mout_group3_5800_p, SRC_TOP8, 20, 3),
+	MUX(0, "mout_aclk432_cam", mout_group6_5800_p, SRC_TOP8, 24, 2),
+	MUX(0, "mout_aclk432_scaler", mout_group6_5800_p, SRC_TOP8, 28, 2),
+
+	MUX(0, "mout_user_aclk550_cam", mout_group15_5800_p,
+							SRC_TOP9, 16, 1),
+	MUX(0, "mout_user_aclkfl1_550_cam", mout_group13_5800_p,
+							SRC_TOP9, 20, 1),
+	MUX(0, "mout_user_aclk432_cam", mout_group11_5800_p,
+							SRC_TOP9, 24, 1),
+	MUX(0, "mout_user_aclk432_scaler", mout_group9_5800_p,
+							SRC_TOP9, 28, 1),
+
+	MUX(0, "mout_sw_aclk550_cam", mout_group14_5800_p, SRC_TOP13, 16, 1),
+	MUX(0, "mout_sw_aclkfl1_550_cam", mout_group12_5800_p,
+							SRC_TOP13, 20, 1),
+	MUX(0, "mout_sw_aclk432_cam", mout_group10_5800_p,
+							SRC_TOP13, 24, 1),
+	MUX(0, "mout_sw_aclk432_scaler", mout_group8_5800_p,
+							SRC_TOP13, 28, 1),
+
+	MUX(0, "mout_fimd1", mout_group2_p, SRC_DISP10, 4, 3),
+};
+
+struct samsung_div_clock exynos5800_div_clks[] __initdata = {
+	DIV(0, "dout_aclk400_wcore", "mout_aclk400_wcore", DIV_TOP0, 16, 3),
+
+	DIV(0, "dout_aclk550_cam", "mout_aclk550_cam",
+				DIV_TOP8, 16, 3),
+	DIV(0, "dout_aclkfl1_550_cam", "mout_aclkfl1_550_cam",
+				DIV_TOP8, 20, 3),
+	DIV(0, "dout_aclk432_cam", "mout_aclk432_cam",
+				DIV_TOP8, 24, 3),
+	DIV(0, "dout_aclk432_scaler", "mout_aclk432_scaler",
+				DIV_TOP8, 28, 3),
+
+	DIV(0, "dout_osc_div", "fin_pll", DIV_TOP9, 20, 3),
+	DIV(0, "dout_sclk_sw", "sclk_spll", DIV_TOP9, 24, 6),
+};
+
+struct samsung_gate_clock exynos5800_gate_clks[] __initdata = {
+	GATE(CLK_ACLK550_CAM, "aclk550_cam", "mout_user_aclk550_cam",
+				GATE_BUS_TOP, 24, 0, 0),
+	GATE(CLK_ACLK432_SCALER, "aclk432_scaler", "mout_user_aclk432_scaler",
+				GATE_BUS_TOP, 27, 0, 0),
+};
+
+struct samsung_mux_clock exynos5420_mux_clks[] __initdata = {
+	MUX(0, "sclk_bpll", mout_bpll_p, TOP_SPARE2, 0, 1),
+	MUX(0, "mout_aclk400_wcore_bpll", mout_aclk400_wcore_bpll_p,
+				TOP_SPARE2, 4, 1),
+
+	MUX(0, "mout_aclk400_isp", mout_group1_p, SRC_TOP0, 0, 2),
+	MUX_A(0, "mout_aclk400_mscl", mout_group1_p,
+				SRC_TOP0, 4, 2, "aclk400_mscl"),
+	MUX(0, "mout_aclk400_wcore", mout_group1_p, SRC_TOP0, 16, 2),
+	MUX(0, "mout_aclk100_noc", mout_group1_p, SRC_TOP0, 20, 2),
+
+	MUX(0, "mout_aclk333_432_gscl", mout_group4_p, SRC_TOP1, 0, 2),
+	MUX(0, "mout_aclk333_432_isp", mout_group4_p,
+				SRC_TOP1, 4, 2),
+	MUX(0, "mout_aclk333_432_isp0", mout_group4_p, SRC_TOP1, 12, 2),
+	MUX(0, "mout_aclk266", mout_group1_p, SRC_TOP1, 20, 2),
+	MUX(0, "mout_aclk333", mout_group1_p, SRC_TOP1, 28, 2),
+
+	MUX(0, "mout_aclk400_disp1", mout_group1_p, SRC_TOP2, 4, 2),
+	MUX(0, "mout_aclk333_g2d", mout_group1_p, SRC_TOP2, 8, 2),
+	MUX(0, "mout_aclk266_g2d", mout_group1_p, SRC_TOP2, 12, 2),
+	MUX(0, "mout_aclk300_jpeg", mout_group1_p, SRC_TOP2, 20, 2),
+	MUX(0, "mout_aclk300_disp1", mout_group1_p, SRC_TOP2, 24, 2),
+	MUX(0, "mout_aclk300_gscl", mout_group1_p, SRC_TOP2, 28, 2),
+
+	MUX(0, "mout_mau_epll_clk", mout_mau_epll_clk_p, SRC_TOP7, 20, 2),
+
+	MUX(0, "mout_fimd1", mout_group3_p, SRC_DISP10, 4, 1),
+};
+
+struct samsung_div_clock exynos5420_div_clks[] __initdata = {
+	DIV(0, "dout_aclk400_wcore", "mout_aclk400_wcore_bpll",
+			DIV_TOP0, 16, 3),
+};
+
+static struct samsung_mux_clock exynos5x_mux_clks[] __initdata = {
+	MUX(0, "mout_user_pclk66_gpio", mout_user_pclk66_gpio_p,
+			SRC_TOP7, 4, 1),
+	MUX(0, "mout_mspll_kfc", mout_mspll_cpu_p, SRC_TOP7, 8, 2),
+	MUX(0, "mout_mspll_cpu", mout_mspll_cpu_p, SRC_TOP7, 12, 2),
+
+	MUX(0, "mout_apll", mout_apll_p, SRC_CPU, 0, 1),
+	MUX(0, "mout_cpu", mout_cpu_p, SRC_CPU, 16, 1),
+	MUX(0, "mout_kpll", mout_kpll_p, SRC_KFC, 0, 1),
+	MUX(0, "mout_kfc", mout_kfc_p, SRC_KFC, 16, 1),
+
+	MUX(0, "mout_aclk200", mout_group1_p, SRC_TOP0, 8, 2),
+	MUX(0, "mout_aclk200_fsys2", mout_group1_p, SRC_TOP0, 12, 2),
+	MUX(0, "mout_pclk200_fsys", mout_group1_p, SRC_TOP0, 24, 2),
+	MUX(0, "mout_aclk200_fsys", mout_group1_p, SRC_TOP0, 28, 2),
+
+	MUX(0, "mout_aclk66", mout_group1_p, SRC_TOP1, 8, 2),
+	MUX(0, "mout_aclk166", mout_group1_p, SRC_TOP1, 24, 2),
+
+	MUX(0, "mout_aclk_g3d", mout_group5_p, SRC_TOP2, 16, 1),
+
+	MUX(0, "mout_user_aclk400_isp", mout_user_aclk400_isp_p,
+			SRC_TOP3, 0, 1),
+	MUX(0, "mout_user_aclk400_mscl", mout_user_aclk400_mscl_p,
 			SRC_TOP3, 4, 1),
-	MUX_A(0, "mout_aclk200_disp1", aclk200_disp1_p,
-			SRC_TOP3, 8, 1, "aclk200_disp1"),
-	MUX(0, "mout_user_aclk200_fsys2", user_aclk200_fsys2_p,
+	MUX(0, "mout_user_aclk200_disp1", mout_user_aclk200_disp1_p,
+			SRC_TOP3, 8, 1),
+	MUX(0, "mout_user_aclk200_fsys2", mout_user_aclk200_fsys2_p,
 			SRC_TOP3, 12, 1),
-	MUX(0, "mout_user_aclk200_fsys", user_aclk200_fsys_p,
+	MUX(0, "mout_user_aclk400_wcore", mout_user_aclk400_wcore_p,
+			SRC_TOP3, 16, 1),
+	MUX(0, "mout_user_aclk100_noc", mout_user_aclk100_noc_p,
+			SRC_TOP3, 20, 1),
+	MUX(0, "mout_user_pclk200_fsys", mout_user_pclk200_fsys_p,
+			SRC_TOP3, 24, 1),
+	MUX(0, "mout_user_aclk200_fsys", mout_user_aclk200_fsys_p,
 			SRC_TOP3, 28, 1),
 
-	MUX(0, "mout_user_aclk333_432_gscl", user_aclk333_432_gscl_p,
+	MUX(0, "mout_user_aclk333_432_gscl", mout_user_aclk333_432_gscl_p,
 			SRC_TOP4, 0, 1),
-	MUX(0, "mout_aclk66_peric", aclk66_peric_p, SRC_TOP4, 8, 1),
-	MUX(0, "mout_user_aclk266", user_aclk266_p, SRC_TOP4, 20, 1),
-	MUX(0, "mout_user_aclk166", user_aclk166_p, SRC_TOP4, 24, 1),
-	MUX(0, "mout_user_aclk333", user_aclk333_p, SRC_TOP4, 28, 1),
-
-	MUX(0, "mout_aclk66_psgen", aclk66_peric_p, SRC_TOP5, 4, 1),
-	MUX(0, "mout_user_aclk333_g2d", user_aclk333_g2d_p, SRC_TOP5, 8, 1),
-	MUX(0, "mout_user_aclk266_g2d", user_aclk266_g2d_p, SRC_TOP5, 12, 1),
-	MUX_A(0, "mout_user_aclk_g3d", user_aclk_g3d_p,
-			SRC_TOP5, 16, 1, "aclkg3d"),
-	MUX(0, "mout_user_aclk300_jpeg", user_aclk300_jpeg_p,
+	MUX(0, "mout_user_aclk333_432_isp", mout_user_aclk333_432_isp_p,
+			SRC_TOP4, 4, 1),
+	MUX(0, "mout_user_aclk66_peric", mout_user_aclk66_peric_p,
+			SRC_TOP4, 8, 1),
+	MUX(0, "mout_user_aclk333_432_isp0", mout_user_aclk333_432_isp0_p,
+			SRC_TOP4, 12, 1),
+	MUX(0, "mout_user_aclk266_isp", mout_user_aclk266_isp_p,
+			SRC_TOP4, 16, 1),
+	MUX(0, "mout_user_aclk266", mout_user_aclk266_p, SRC_TOP4, 20, 1),
+	MUX(0, "mout_user_aclk166", mout_user_aclk166_p, SRC_TOP4, 24, 1),
+	MUX(0, "mout_user_aclk333", mout_user_aclk333_p, SRC_TOP4, 28, 1),
+
+	MUX(0, "mout_user_aclk400_disp1", mout_user_aclk400_disp1_p,
+			SRC_TOP5, 0, 1),
+	MUX(0, "mout_user_aclk66_psgen", mout_user_aclk66_peric_p,
+			SRC_TOP5, 4, 1),
+	MUX(0, "mout_user_aclk333_g2d", mout_user_aclk333_g2d_p,
+			SRC_TOP5, 8, 1),
+	MUX(0, "mout_user_aclk266_g2d", mout_user_aclk266_g2d_p,
+			SRC_TOP5, 12, 1),
+	MUX(CLK_MOUT_G3D, "mout_user_aclk_g3d", mout_user_aclk_g3d_p,
+			SRC_TOP5, 16, 1),
+	MUX(0, "mout_user_aclk300_jpeg", mout_user_aclk300_jpeg_p,
 			SRC_TOP5, 20, 1),
-	MUX(0, "mout_user_aclk300_disp1", user_aclk300_disp1_p,
+	MUX(0, "mout_user_aclk300_disp1", mout_user_aclk300_disp1_p,
 			SRC_TOP5, 24, 1),
-	MUX(0, "mout_user_aclk300_gscl", user_aclk300_gscl_p,
+	MUX(0, "mout_user_aclk300_gscl", mout_user_aclk300_gscl_p,
 			SRC_TOP5, 28, 1),
 
-	MUX(0, "sclk_mpll", mpll_p, SRC_TOP6, 0, 1),
-	MUX(0, "sclk_vpll", vpll_p, SRC_TOP6, 4, 1),
-	MUX(0, "sclk_spll", spll_p, SRC_TOP6, 8, 1),
-	MUX(0, "sclk_ipll", ipll_p, SRC_TOP6, 12, 1),
-	MUX(0, "sclk_rpll", rpll_p, SRC_TOP6, 16, 1),
-	MUX(0, "sclk_epll", epll_p, SRC_TOP6, 20, 1),
-	MUX(0, "sclk_dpll", dpll_p, SRC_TOP6, 24, 1),
-	MUX(0, "sclk_cpll", cpll_p, SRC_TOP6, 28, 1),
-
-	MUX(0, "mout_sw_aclk400_mscl", sw_aclk400_mscl_p, SRC_TOP10, 4, 1),
-	MUX(0, "mout_sw_aclk200", sw_aclk200_p, SRC_TOP10, 8, 1),
-	MUX(0, "mout_sw_aclk200_fsys2", sw_aclk200_fsys2_p,
+	MUX(0, "mout_sclk_mpll", mout_mpll_p, SRC_TOP6, 0, 1),
+	MUX(CLK_MOUT_VPLL, "mout_sclk_vpll", mout_vpll_p, SRC_TOP6, 4, 1),
+	MUX(0, "mout_sclk_spll", mout_spll_p, SRC_TOP6, 8, 1),
+	MUX(0, "mout_sclk_ipll", mout_ipll_p, SRC_TOP6, 12, 1),
+	MUX(0, "mout_sclk_rpll", mout_rpll_p, SRC_TOP6, 16, 1),
+	MUX(0, "mout_sclk_epll", mout_epll_p, SRC_TOP6, 20, 1),
+	MUX(0, "mout_sclk_dpll", mout_dpll_p, SRC_TOP6, 24, 1),
+	MUX(0, "mout_sclk_cpll", mout_cpll_p, SRC_TOP6, 28, 1),
+
+	MUX(0, "mout_sw_aclk400_isp", mout_sw_aclk400_isp_p,
+			SRC_TOP10, 0, 1),
+	MUX(0, "mout_sw_aclk400_mscl", mout_sw_aclk400_mscl_p,
+			SRC_TOP10, 4, 1),
+	MUX(0, "mout_sw_aclk200", mout_sw_aclk200_p, SRC_TOP10, 8, 1),
+	MUX(0, "mout_sw_aclk200_fsys2", mout_sw_aclk200_fsys2_p,
 			SRC_TOP10, 12, 1),
-	MUX(0, "mout_sw_aclk200_fsys", sw_aclk200_fsys_p, SRC_TOP10, 28, 1),
-
-	MUX(0, "mout_sw_aclk333_432_gscl", sw_aclk333_432_gscl_p,
+	MUX(0, "mout_sw_aclk400_wcore", mout_sw_aclk400_wcore_p,
+			SRC_TOP10, 16, 1),
+	MUX(0, "mout_sw_aclk100_noc", mout_sw_aclk100_noc_p,
+			SRC_TOP10, 20, 1),
+	MUX(0, "mout_sw_pclk200_fsys", mout_sw_pclk200_fsys_p,
+			SRC_TOP10, 24, 1),
+	MUX(0, "mout_sw_aclk200_fsys", mout_sw_aclk200_fsys_p,
+			SRC_TOP10, 28, 1),
+
+	MUX(0, "mout_sw_aclk333_432_gscl", mout_sw_aclk333_432_gscl_p,
 			SRC_TOP11, 0, 1),
-	MUX(0, "mout_sw_aclk66", sw_aclk66_p, SRC_TOP11, 8, 1),
-	MUX(0, "mout_sw_aclk266", sw_aclk266_p, SRC_TOP11, 20, 1),
-	MUX(0, "mout_sw_aclk166", sw_aclk166_p, SRC_TOP11, 24, 1),
-	MUX(0, "mout_sw_aclk333", sw_aclk333_p, SRC_TOP11, 28, 1),
-
-	MUX(0, "mout_sw_aclk333_g2d", sw_aclk333_g2d_p, SRC_TOP12, 8, 1),
-	MUX(0, "mout_sw_aclk266_g2d", sw_aclk266_g2d_p, SRC_TOP12, 12, 1),
-	MUX(0, "mout_sw_aclk_g3d", sw_aclk_g3d_p, SRC_TOP12, 16, 1),
-	MUX(0, "mout_sw_aclk300_jpeg", sw_aclk300_jpeg_p, SRC_TOP12, 20, 1),
-	MUX(0, "mout_sw_aclk300_disp1", sw_aclk300_disp1_p,
+	MUX(0, "mout_sw_aclk333_432_isp", mout_sw_aclk333_432_isp_p,
+			SRC_TOP11, 4, 1),
+	MUX(0, "mout_sw_aclk66", mout_sw_aclk66_p, SRC_TOP11, 8, 1),
+	MUX(0, "mout_sw_aclk333_432_isp0", mout_sw_aclk333_432_isp0_p,
+			SRC_TOP11, 12, 1),
+	MUX(0, "mout_sw_aclk266", mout_sw_aclk266_p, SRC_TOP11, 20, 1),
+	MUX(0, "mout_sw_aclk166", mout_sw_aclk166_p, SRC_TOP11, 24, 1),
+	MUX(0, "mout_sw_aclk333", mout_sw_aclk333_p, SRC_TOP11, 28, 1),
+
+	MUX(0, "mout_sw_aclk400_disp1", mout_sw_aclk400_disp1_p,
+			SRC_TOP12, 4, 1),
+	MUX(0, "mout_sw_aclk333_g2d", mout_sw_aclk333_g2d_p,
+			SRC_TOP12, 8, 1),
+	MUX(0, "mout_sw_aclk266_g2d", mout_sw_aclk266_g2d_p,
+			SRC_TOP12, 12, 1),
+	MUX(0, "mout_sw_aclk_g3d", mout_sw_aclk_g3d_p, SRC_TOP12, 16, 1),
+	MUX(0, "mout_sw_aclk300_jpeg", mout_sw_aclk300_jpeg_p,
+			SRC_TOP12, 20, 1),
+	MUX(0, "mout_sw_aclk300_disp1", mout_sw_aclk300_disp1_p,
 			SRC_TOP12, 24, 1),
-	MUX(0, "mout_sw_aclk300_gscl", sw_aclk300_gscl_p, SRC_TOP12, 28, 1),
+	MUX(0, "mout_sw_aclk300_gscl", mout_sw_aclk300_gscl_p,
+			SRC_TOP12, 28, 1),
 
 	/* DISP1 Block */
-	MUX(0, "mout_fimd1", group3_p, SRC_DISP10, 4, 1),
-	MUX(0, "mout_mipi1", group2_p, SRC_DISP10, 16, 3),
-	MUX(0, "mout_dp1", group2_p, SRC_DISP10, 20, 3),
-	MUX(0, "mout_pixel", group2_p, SRC_DISP10, 24, 3),
-	MUX(CLK_MOUT_HDMI, "mout_hdmi", hdmi_p, SRC_DISP10, 28, 1),
+	MUX(0, "mout_mipi1", mout_group2_p, SRC_DISP10, 16, 3),
+	MUX(0, "mout_dp1", mout_group2_p, SRC_DISP10, 20, 3),
+	MUX(0, "mout_pixel", mout_group2_p, SRC_DISP10, 24, 3),
+	MUX(CLK_MOUT_HDMI, "mout_hdmi", mout_hdmi_p, SRC_DISP10, 28, 1),
+	MUX(0, "mout_fimd1_opt", mout_group2_p, SRC_DISP10, 8, 3),
+
+	MUX(0, "mout_fimd1_final", mout_fimd1_final_p, TOP_SPARE2, 8, 1),
 
 	/* MAU Block */
-	MUX(0, "mout_maudio0", maudio0_p, SRC_MAU, 28, 3),
+	MUX(CLK_MOUT_MAUDIO0, "mout_maudio0", mout_maudio0_p, SRC_MAU, 28, 3),
 
 	/* FSYS Block */
-	MUX(0, "mout_usbd301", group2_p, SRC_FSYS, 4, 3),
-	MUX(0, "mout_mmc0", group2_p, SRC_FSYS, 8, 3),
-	MUX(0, "mout_mmc1", group2_p, SRC_FSYS, 12, 3),
-	MUX(0, "mout_mmc2", group2_p, SRC_FSYS, 16, 3),
-	MUX(0, "mout_usbd300", group2_p, SRC_FSYS, 20, 3),
-	MUX(0, "mout_unipro", group2_p, SRC_FSYS, 24, 3),
+	MUX(0, "mout_usbd301", mout_group2_p, SRC_FSYS, 4, 3),
+	MUX(0, "mout_mmc0", mout_group2_p, SRC_FSYS, 8, 3),
+	MUX(0, "mout_mmc1", mout_group2_p, SRC_FSYS, 12, 3),
+	MUX(0, "mout_mmc2", mout_group2_p, SRC_FSYS, 16, 3),
+	MUX(0, "mout_usbd300", mout_group2_p, SRC_FSYS, 20, 3),
+	MUX(0, "mout_unipro", mout_group2_p, SRC_FSYS, 24, 3),
+	MUX(0, "mout_mphy_refclk", mout_group2_p, SRC_FSYS, 28, 3),
 
 	/* PERIC Block */
-	MUX(0, "mout_uart0", group2_p, SRC_PERIC0, 4, 3),
-	MUX(0, "mout_uart1", group2_p, SRC_PERIC0, 8, 3),
-	MUX(0, "mout_uart2", group2_p, SRC_PERIC0, 12, 3),
-	MUX(0, "mout_uart3", group2_p, SRC_PERIC0, 16, 3),
-	MUX(0, "mout_pwm", group2_p, SRC_PERIC0, 24, 3),
-	MUX(0, "mout_spdif", spdif_p, SRC_PERIC0, 28, 3),
-	MUX(0, "mout_audio0", audio0_p, SRC_PERIC1, 8, 3),
-	MUX(0, "mout_audio1", audio1_p, SRC_PERIC1, 12, 3),
-	MUX(0, "mout_audio2", audio2_p, SRC_PERIC1, 16, 3),
-	MUX(0, "mout_spi0", group2_p, SRC_PERIC1, 20, 3),
-	MUX(0, "mout_spi1", group2_p, SRC_PERIC1, 24, 3),
-	MUX(0, "mout_spi2", group2_p, SRC_PERIC1, 28, 3),
+	MUX(0, "mout_uart0", mout_group2_p, SRC_PERIC0, 4, 3),
+	MUX(0, "mout_uart1", mout_group2_p, SRC_PERIC0, 8, 3),
+	MUX(0, "mout_uart2", mout_group2_p, SRC_PERIC0, 12, 3),
+	MUX(0, "mout_uart3", mout_group2_p, SRC_PERIC0, 16, 3),
+	MUX(0, "mout_pwm", mout_group2_p, SRC_PERIC0, 24, 3),
+	MUX(0, "mout_spdif", mout_spdif_p, SRC_PERIC0, 28, 3),
+	MUX(0, "mout_audio0", mout_audio0_p, SRC_PERIC1, 8, 3),
+	MUX(0, "mout_audio1", mout_audio1_p, SRC_PERIC1, 12, 3),
+	MUX(0, "mout_audio2", mout_audio2_p, SRC_PERIC1, 16, 3),
+	MUX(0, "mout_spi0", mout_group2_p, SRC_PERIC1, 20, 3),
+	MUX(0, "mout_spi1", mout_group2_p, SRC_PERIC1, 24, 3),
+	MUX(0, "mout_spi2", mout_group2_p, SRC_PERIC1, 28, 3),
+
+	/* ISP Block */
+	MUX(0, "mout_pwm_isp", mout_group2_p, SRC_ISP, 24, 3),
+	MUX(0, "mout_uart_isp", mout_group2_p, SRC_ISP, 20, 3),
+	MUX(0, "mout_spi0_isp", mout_group2_p, SRC_ISP, 12, 3),
+	MUX(0, "mout_spi1_isp", mout_group2_p, SRC_ISP, 16, 3),
+	MUX(0, "mout_isp_sensor", mout_group2_p, SRC_ISP, 28, 3),
 };
 
-static struct samsung_div_clock exynos5420_div_clks[] __initdata = {
+static struct samsung_div_clock exynos5x_div_clks[] __initdata = {
 	DIV(0, "div_arm", "mout_cpu", DIV_CPU0, 0, 3),
 	DIV(0, "sclk_apll", "mout_apll", DIV_CPU0, 24, 3),
 	DIV(0, "armclk2", "div_arm", DIV_CPU0, 28, 3),
-	DIV(0, "div_kfc", "mout_cpu_kfc", DIV_KFC0, 0, 3),
+	DIV(0, "div_kfc", "mout_kfc", DIV_KFC0, 0, 3),
 	DIV(0, "sclk_kpll", "mout_kpll", DIV_KFC0, 24, 3),
 
+	DIV(0, "dout_aclk400_isp", "mout_aclk400_isp", DIV_TOP0, 0, 3),
 	DIV(0, "dout_aclk400_mscl", "mout_aclk400_mscl", DIV_TOP0, 4, 3),
 	DIV(0, "dout_aclk200", "mout_aclk200", DIV_TOP0, 8, 3),
 	DIV(0, "dout_aclk200_fsys2", "mout_aclk200_fsys2", DIV_TOP0, 12, 3),
+	DIV(0, "dout_aclk100_noc", "mout_aclk100_noc", DIV_TOP0, 20, 3),
 	DIV(0, "dout_pclk200_fsys", "mout_pclk200_fsys", DIV_TOP0, 24, 3),
 	DIV(0, "dout_aclk200_fsys", "mout_aclk200_fsys", DIV_TOP0, 28, 3),
 
 	DIV(0, "dout_aclk333_432_gscl", "mout_aclk333_432_gscl",
 			DIV_TOP1, 0, 3),
+	DIV(0, "dout_aclk333_432_isp", "mout_aclk333_432_isp",
+			DIV_TOP1, 4, 3),
 	DIV(0, "dout_aclk66", "mout_aclk66", DIV_TOP1, 8, 6),
+	DIV(0, "dout_aclk333_432_isp0", "mout_aclk333_432_isp0",
+			DIV_TOP1, 16, 3),
 	DIV(0, "dout_aclk266", "mout_aclk266", DIV_TOP1, 20, 3),
 	DIV(0, "dout_aclk166", "mout_aclk166", DIV_TOP1, 24, 3),
 	DIV(0, "dout_aclk333", "mout_aclk333", DIV_TOP1, 28, 3),
@@ -458,15 +773,16 @@ static struct samsung_div_clock exynos5420_div_clks[] __initdata = {
 	DIV(0, "dout_aclk266_g2d", "mout_aclk266_g2d", DIV_TOP2, 12, 3),
 	DIV(0, "dout_aclk_g3d", "mout_aclk_g3d", DIV_TOP2, 16, 3),
 	DIV(0, "dout_aclk300_jpeg", "mout_aclk300_jpeg", DIV_TOP2, 20, 3),
-	DIV_A(0, "dout_aclk300_disp1", "mout_aclk300_disp1",
-			DIV_TOP2, 24, 3, "aclk300_disp1"),
+	DIV(0, "dout_aclk300_disp1", "mout_aclk300_disp1", DIV_TOP2, 24, 3),
 	DIV(0, "dout_aclk300_gscl", "mout_aclk300_gscl", DIV_TOP2, 28, 3),
 
 	/* DISP1 Block */
-	DIV(0, "dout_fimd1", "mout_fimd1", DIV_DISP10, 0, 4),
+	DIV(0, "dout_fimd1", "mout_fimd1_final", DIV_DISP10, 0, 4),
 	DIV(0, "dout_mipi1", "mout_mipi1", DIV_DISP10, 16, 8),
 	DIV(0, "dout_dp1", "mout_dp1", DIV_DISP10, 24, 4),
 	DIV(CLK_DOUT_PIXEL, "dout_hdmi_pixel", "mout_pixel", DIV_DISP10, 28, 4),
+	DIV(0, "dout_disp1_blk", "aclk200_disp1", DIV2_RATIO0, 16, 2),
+	DIV(0, "dout_aclk400_disp1", "mout_aclk400_disp1", DIV_TOP2, 4, 3),
 
 	/* Audio Block */
 	DIV(0, "dout_maudio0", "mout_maudio0", DIV_MAU, 20, 4),
@@ -484,6 +800,7 @@ static struct samsung_div_clock exynos5420_div_clks[] __initdata = {
 	DIV(0, "dout_mmc2", "mout_mmc2", DIV_FSYS1, 20, 10),
 
 	DIV(0, "dout_unipro", "mout_unipro", DIV_FSYS2, 24, 8),
+	DIV(0, "dout_mphy_refclk", "mout_mphy_refclk", DIV_FSYS2, 16, 8),
 
 	/* UART and PWM */
 	DIV(0, "dout_uart0", "mout_uart0", DIV_PERIC0, 8, 4),
@@ -497,6 +814,9 @@ static struct samsung_div_clock exynos5420_div_clks[] __initdata = {
 	DIV(0, "dout_spi1", "mout_spi1", DIV_PERIC1, 24, 4),
 	DIV(0, "dout_spi2", "mout_spi2", DIV_PERIC1, 28, 4),
 
+	/* Mfc Block */
+	DIV(0, "dout_mfc_blk", "mout_user_aclk333", DIV4_RATIO, 0, 2),
+
 	/* PCM */
 	DIV(0, "dout_pcm1", "dout_audio1", DIV_PERIC2, 16, 8),
 	DIV(0, "dout_pcm2", "dout_audio2", DIV_PERIC2, 24, 8),
@@ -509,15 +829,43 @@ static struct samsung_div_clock exynos5420_div_clks[] __initdata = {
 	DIV(0, "dout_audio2", "mout_audio2", DIV_PERIC3, 28, 4),
 
 	/* SPI Pre-Ratio */
-	DIV(0, "dout_pre_spi0", "dout_spi0", DIV_PERIC4, 8, 8),
-	DIV(0, "dout_pre_spi1", "dout_spi1", DIV_PERIC4, 16, 8),
-	DIV(0, "dout_pre_spi2", "dout_spi2", DIV_PERIC4, 24, 8),
+	DIV(0, "dout_spi0_pre", "dout_spi0", DIV_PERIC4, 8, 8),
+	DIV(0, "dout_spi1_pre", "dout_spi1", DIV_PERIC4, 16, 8),
+	DIV(0, "dout_spi2_pre", "dout_spi2", DIV_PERIC4, 24, 8),
+
+	/* GSCL Block */
+	DIV(0, "dout_gscl_blk_300", "mout_user_aclk300_gscl",
+			DIV2_RATIO0, 4, 2),
+	DIV(0, "dout_gscl_blk_333", "aclk333_432_gscl", DIV2_RATIO0, 6, 2),
+
+	/* MSCL Block */
+	DIV(0, "dout_mscl_blk", "aclk400_mscl", DIV2_RATIO0, 28, 2),
+
+	/* PSGEN */
+	DIV(0, "dout_gen_blk", "mout_user_aclk266", DIV2_RATIO0, 8, 1),
+	DIV(0, "dout_jpg_blk", "aclk166", DIV2_RATIO0, 20, 1),
+
+	/* ISP Block */
+	DIV(0, "dout_isp_sensor0", "mout_isp_sensor", SCLK_DIV_ISP0, 8, 8),
+	DIV(0, "dout_isp_sensor1", "mout_isp_sensor", SCLK_DIV_ISP0, 16, 8),
+	DIV(0, "dout_isp_sensor2", "mout_isp_sensor", SCLK_DIV_ISP0, 24, 8),
+	DIV(0, "dout_pwm_isp", "mout_pwm_isp", SCLK_DIV_ISP1, 28, 4),
+	DIV(0, "dout_uart_isp", "mout_uart_isp", SCLK_DIV_ISP1, 24, 4),
+	DIV(0, "dout_spi0_isp", "mout_spi0_isp", SCLK_DIV_ISP1, 16, 4),
+	DIV(0, "dout_spi1_isp", "mout_spi1_isp", SCLK_DIV_ISP1, 20, 4),
+	DIV_F(0, "dout_spi0_isp_pre", "dout_spi0_isp", SCLK_DIV_ISP1, 0, 8,
+			CLK_SET_RATE_PARENT, 0),
+	DIV_F(0, "dout_spi1_isp_pre", "dout_spi1_isp", SCLK_DIV_ISP1, 8, 8,
+			CLK_SET_RATE_PARENT, 0),
 };
 
-static struct samsung_gate_clock exynos5420_gate_clks[] __initdata = {
-	/* TODO: Re-verify the CG bits for all the gate clocks */
-	GATE_A(CLK_MCT, "pclk_st", "aclk66_psgen", GATE_BUS_PERIS1, 2, 0, 0,
-		"mct"),
+static struct samsung_gate_clock exynos5x_gate_clks[] __initdata = {
+	/* G2D */
+	GATE(CLK_MDMA0, "mdma0", "aclk266_g2d", GATE_IP_G2D, 1, 0, 0),
+	GATE(CLK_SSS, "sss", "aclk266_g2d", GATE_IP_G2D, 2, 0, 0),
+	GATE(CLK_G2D, "g2d", "aclk333_g2d", GATE_IP_G2D, 3, 0, 0),
+	GATE(CLK_SMMU_MDMA0, "smmu_mdma0", "aclk266_g2d", GATE_IP_G2D, 5, 0, 0),
+	GATE(CLK_SMMU_G2D, "smmu_g2d", "aclk333_g2d", GATE_IP_G2D, 7, 0, 0),
 
 	GATE(0, "aclk200_fsys", "mout_user_aclk200_fsys",
 			GATE_BUS_FSYS0, 9, CLK_IGNORE_UNUSED, 0),
@@ -530,20 +878,42 @@ static struct samsung_gate_clock exynos5420_gate_clks[] __initdata = {
 			GATE_BUS_TOP, 1, CLK_IGNORE_UNUSED, 0),
 	GATE(0, "aclk300_jpeg", "mout_user_aclk300_jpeg",
 			GATE_BUS_TOP, 4, CLK_IGNORE_UNUSED, 0),
+	GATE(0, "aclk333_432_isp0", "mout_user_aclk333_432_isp0",
+			GATE_BUS_TOP, 5, 0, 0),
 	GATE(0, "aclk300_gscl", "mout_user_aclk300_gscl",
 			GATE_BUS_TOP, 6, CLK_IGNORE_UNUSED, 0),
 	GATE(0, "aclk333_432_gscl", "mout_user_aclk333_432_gscl",
 			GATE_BUS_TOP, 7, CLK_IGNORE_UNUSED, 0),
-	GATE(0, "pclk66_gpio", "mout_sw_aclk66",
+	GATE(0, "aclk333_432_isp", "mout_user_aclk333_432_isp",
+			GATE_BUS_TOP, 8, 0, 0),
+	GATE(CLK_PCLK66_GPIO, "pclk66_gpio", "mout_user_pclk66_gpio",
 			GATE_BUS_TOP, 9, CLK_IGNORE_UNUSED, 0),
-	GATE(0, "aclk66_psgen", "mout_aclk66_psgen",
+	GATE(0, "aclk66_psgen", "mout_user_aclk66_psgen",
 			GATE_BUS_TOP, 10, CLK_IGNORE_UNUSED, 0),
-	GATE(0, "aclk66_peric", "mout_aclk66_peric",
-			GATE_BUS_TOP, 11, 0, 0),
+	GATE(CLK_ACLK66_PERIC, "aclk66_peric", "mout_user_aclk66_peric",
+			GATE_BUS_TOP, 11, CLK_IGNORE_UNUSED, 0),
+	GATE(0, "aclk266_isp", "mout_user_aclk266_isp",
+			GATE_BUS_TOP, 13, 0, 0),
 	GATE(0, "aclk166", "mout_user_aclk166",
 			GATE_BUS_TOP, 14, CLK_IGNORE_UNUSED, 0),
 	GATE(0, "aclk333", "mout_aclk333",
 			GATE_BUS_TOP, 15, CLK_IGNORE_UNUSED, 0),
+	GATE(0, "aclk400_isp", "mout_user_aclk400_isp",
+			GATE_BUS_TOP, 16, 0, 0),
+	GATE(0, "aclk400_mscl", "mout_user_aclk400_mscl",
+			GATE_BUS_TOP, 17, 0, 0),
+	GATE(0, "aclk200_disp1", "mout_user_aclk200_disp1",
+			GATE_BUS_TOP, 18, 0, 0),
+	GATE(CLK_SCLK_MPHY_IXTAL24, "sclk_mphy_ixtal24", "mphy_refclk_ixtal24",
+			GATE_BUS_TOP, 28, 0, 0),
+	GATE(CLK_SCLK_HSIC_12M, "sclk_hsic_12m", "ff_hsic_12m",
+			GATE_BUS_TOP, 29, 0, 0),
+
+	GATE(0, "aclk300_disp1", "mout_user_aclk300_disp1",
+			SRC_MASK_TOP2, 24, 0, 0),
+
+	GATE(CLK_MAU_EPLL, "mau_epll", "mout_mau_epll_clk",
+			SRC_MASK_TOP7, 20, 0, 0),
 
 	/* sclk */
 	GATE(CLK_SCLK_UART0, "sclk_uart0", "dout_uart0",
@@ -554,11 +924,11 @@ static struct samsung_gate_clock exynos5420_gate_clks[] __initdata = {
 		GATE_TOP_SCLK_PERIC, 2, CLK_SET_RATE_PARENT, 0),
 	GATE(CLK_SCLK_UART3, "sclk_uart3", "dout_uart3",
 		GATE_TOP_SCLK_PERIC, 3, CLK_SET_RATE_PARENT, 0),
-	GATE(CLK_SCLK_SPI0, "sclk_spi0", "dout_pre_spi0",
+	GATE(CLK_SCLK_SPI0, "sclk_spi0", "dout_spi0_pre",
 		GATE_TOP_SCLK_PERIC, 6, CLK_SET_RATE_PARENT, 0),
-	GATE(CLK_SCLK_SPI1, "sclk_spi1", "dout_pre_spi1",
+	GATE(CLK_SCLK_SPI1, "sclk_spi1", "dout_spi1_pre",
 		GATE_TOP_SCLK_PERIC, 7, CLK_SET_RATE_PARENT, 0),
-	GATE(CLK_SCLK_SPI2, "sclk_spi2", "dout_pre_spi2",
+	GATE(CLK_SCLK_SPI2, "sclk_spi2", "dout_spi2_pre",
 		GATE_TOP_SCLK_PERIC, 8, CLK_SET_RATE_PARENT, 0),
 	GATE(CLK_SCLK_SPDIF, "sclk_spdif", "mout_spdif",
 		GATE_TOP_SCLK_PERIC, 9, CLK_SET_RATE_PARENT, 0),
@@ -588,164 +958,191 @@ static struct samsung_gate_clock exynos5420_gate_clks[] __initdata = {
 	GATE(CLK_SCLK_USBD301, "sclk_usbd301", "dout_usbd301",
 		GATE_TOP_SCLK_FSYS, 10, CLK_SET_RATE_PARENT, 0),
 
-	GATE(CLK_SCLK_USBD301, "sclk_unipro", "dout_unipro",
-		SRC_MASK_FSYS, 24, CLK_SET_RATE_PARENT, 0),
-
-	GATE(CLK_SCLK_GSCL_WA, "sclk_gscl_wa", "aclK333_432_gscl",
-		GATE_TOP_SCLK_GSCL, 6, CLK_SET_RATE_PARENT, 0),
-	GATE(CLK_SCLK_GSCL_WB, "sclk_gscl_wb", "aclk333_432_gscl",
-		GATE_TOP_SCLK_GSCL, 7, CLK_SET_RATE_PARENT, 0),
-
 	/* Display */
 	GATE(CLK_SCLK_FIMD1, "sclk_fimd1", "dout_fimd1",
-		GATE_TOP_SCLK_DISP1, 0, CLK_SET_RATE_PARENT, 0),
+			GATE_TOP_SCLK_DISP1, 0, CLK_SET_RATE_PARENT, 0),
 	GATE(CLK_SCLK_MIPI1, "sclk_mipi1", "dout_mipi1",
-		GATE_TOP_SCLK_DISP1, 3, CLK_SET_RATE_PARENT, 0),
+			GATE_TOP_SCLK_DISP1, 3, CLK_SET_RATE_PARENT, 0),
 	GATE(CLK_SCLK_HDMI, "sclk_hdmi", "mout_hdmi",
-		GATE_TOP_SCLK_DISP1, 9, CLK_SET_RATE_PARENT, 0),
+			GATE_TOP_SCLK_DISP1, 9, 0, 0),
 	GATE(CLK_SCLK_PIXEL, "sclk_pixel", "dout_hdmi_pixel",
-		GATE_TOP_SCLK_DISP1, 10, CLK_SET_RATE_PARENT, 0),
+			GATE_TOP_SCLK_DISP1, 10, CLK_SET_RATE_PARENT, 0),
 	GATE(CLK_SCLK_DP1, "sclk_dp1", "dout_dp1",
-		GATE_TOP_SCLK_DISP1, 20, CLK_SET_RATE_PARENT, 0),
+			GATE_TOP_SCLK_DISP1, 20, CLK_SET_RATE_PARENT, 0),
 
 	/* Maudio Block */
 	GATE(CLK_SCLK_MAUDIO0, "sclk_maudio0", "dout_maudio0",
 		GATE_TOP_SCLK_MAU, 0, CLK_SET_RATE_PARENT, 0),
 	GATE(CLK_SCLK_MAUPCM0, "sclk_maupcm0", "dout_maupcm0",
 		GATE_TOP_SCLK_MAU, 1, CLK_SET_RATE_PARENT, 0),
-	/* FSYS */
+
+	/* FSYS Block */
 	GATE(CLK_TSI, "tsi", "aclk200_fsys", GATE_BUS_FSYS0, 0, 0, 0),
 	GATE(CLK_PDMA0, "pdma0", "aclk200_fsys", GATE_BUS_FSYS0, 1, 0, 0),
 	GATE(CLK_PDMA1, "pdma1", "aclk200_fsys", GATE_BUS_FSYS0, 2, 0, 0),
 	GATE(CLK_UFS, "ufs", "aclk200_fsys2", GATE_BUS_FSYS0, 3, 0, 0),
-	GATE(CLK_RTIC, "rtic", "aclk200_fsys", GATE_BUS_FSYS0, 5, 0, 0),
-	GATE(CLK_MMC0, "mmc0", "aclk200_fsys2", GATE_BUS_FSYS0, 12, 0, 0),
-	GATE(CLK_MMC1, "mmc1", "aclk200_fsys2", GATE_BUS_FSYS0, 13, 0, 0),
-	GATE(CLK_MMC2, "mmc2", "aclk200_fsys2", GATE_BUS_FSYS0, 14, 0, 0),
+	GATE(CLK_RTIC, "rtic", "aclk200_fsys", GATE_IP_FSYS, 9, 0, 0),
+	GATE(CLK_MMC0, "mmc0", "aclk200_fsys2", GATE_IP_FSYS, 12, 0, 0),
+	GATE(CLK_MMC1, "mmc1", "aclk200_fsys2", GATE_IP_FSYS, 13, 0, 0),
+	GATE(CLK_MMC2, "mmc2", "aclk200_fsys2", GATE_IP_FSYS, 14, 0, 0),
 	GATE(CLK_SROMC, "sromc", "aclk200_fsys2",
-			GATE_BUS_FSYS0, 19, CLK_IGNORE_UNUSED, 0),
-	GATE(CLK_USBH20, "usbh20", "aclk200_fsys", GATE_BUS_FSYS0, 20, 0, 0),
-	GATE(CLK_USBD300, "usbd300", "aclk200_fsys", GATE_BUS_FSYS0, 21, 0, 0),
-	GATE(CLK_USBD301, "usbd301", "aclk200_fsys", GATE_BUS_FSYS0, 28, 0, 0),
-
-	/* UART */
-	GATE(CLK_UART0, "uart0", "aclk66_peric", GATE_BUS_PERIC, 4, 0, 0),
-	GATE(CLK_UART1, "uart1", "aclk66_peric", GATE_BUS_PERIC, 5, 0, 0),
-	GATE_A(CLK_UART2, "uart2", "aclk66_peric",
-		GATE_BUS_PERIC, 6, CLK_IGNORE_UNUSED, 0, "uart2"),
-	GATE(CLK_UART3, "uart3", "aclk66_peric", GATE_BUS_PERIC, 7, 0, 0),
-	/* I2C */
-	GATE(CLK_I2C0, "i2c0", "aclk66_peric", GATE_BUS_PERIC, 9, 0, 0),
-	GATE(CLK_I2C1, "i2c1", "aclk66_peric", GATE_BUS_PERIC, 10, 0, 0),
-	GATE(CLK_I2C2, "i2c2", "aclk66_peric", GATE_BUS_PERIC, 11, 0, 0),
-	GATE(CLK_I2C3, "i2c3", "aclk66_peric", GATE_BUS_PERIC, 12, 0, 0),
-	GATE(CLK_I2C4, "i2c4", "aclk66_peric", GATE_BUS_PERIC, 13, 0, 0),
-	GATE(CLK_I2C5, "i2c5", "aclk66_peric", GATE_BUS_PERIC, 14, 0, 0),
-	GATE(CLK_I2C6, "i2c6", "aclk66_peric", GATE_BUS_PERIC, 15, 0, 0),
-	GATE(CLK_I2C7, "i2c7", "aclk66_peric", GATE_BUS_PERIC, 16, 0, 0),
-	GATE(CLK_I2C_HDMI, "i2c_hdmi", "aclk66_peric", GATE_BUS_PERIC, 17, 0,
-		0),
-	GATE(CLK_TSADC, "tsadc", "aclk66_peric", GATE_BUS_PERIC, 18, 0, 0),
-	/* SPI */
-	GATE(CLK_SPI0, "spi0", "aclk66_peric", GATE_BUS_PERIC, 19, 0, 0),
-	GATE(CLK_SPI1, "spi1", "aclk66_peric", GATE_BUS_PERIC, 20, 0, 0),
-	GATE(CLK_SPI2, "spi2", "aclk66_peric", GATE_BUS_PERIC, 21, 0, 0),
-	GATE(CLK_KEYIF, "keyif", "aclk66_peric", GATE_BUS_PERIC, 22, 0, 0),
-	/* I2S */
-	GATE(CLK_I2S1, "i2s1", "aclk66_peric", GATE_BUS_PERIC, 23, 0, 0),
-	GATE(CLK_I2S2, "i2s2", "aclk66_peric", GATE_BUS_PERIC, 24, 0, 0),
-	/* PCM */
-	GATE(CLK_PCM1, "pcm1", "aclk66_peric", GATE_BUS_PERIC, 25, 0, 0),
-	GATE(CLK_PCM2, "pcm2", "aclk66_peric", GATE_BUS_PERIC, 26, 0, 0),
-	/* PWM */
-	GATE(CLK_PWM, "pwm", "aclk66_peric", GATE_BUS_PERIC, 27, 0, 0),
-	/* SPDIF */
-	GATE(CLK_SPDIF, "spdif", "aclk66_peric", GATE_BUS_PERIC, 29, 0, 0),
+			GATE_IP_FSYS, 17, CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_USBH20, "usbh20", "aclk200_fsys", GATE_IP_FSYS, 18, 0, 0),
+	GATE(CLK_USBD300, "usbd300", "aclk200_fsys", GATE_IP_FSYS, 19, 0, 0),
+	GATE(CLK_USBD301, "usbd301", "aclk200_fsys", GATE_IP_FSYS, 20, 0, 0),
+	GATE(CLK_SCLK_UNIPRO, "sclk_unipro", "dout_unipro",
+			SRC_MASK_FSYS, 24, CLK_SET_RATE_PARENT, 0),
 
-	GATE(CLK_I2C8, "i2c8", "aclk66_peric", GATE_BUS_PERIC1, 0, 0, 0),
-	GATE(CLK_I2C9, "i2c9", "aclk66_peric", GATE_BUS_PERIC1, 1, 0, 0),
-	GATE(CLK_I2C10, "i2c10", "aclk66_peric", GATE_BUS_PERIC1, 2, 0, 0),
+	/* PERIC Block */
+	GATE(CLK_UART0, "uart0", "aclk66_peric", GATE_IP_PERIC, 0, 0, 0),
+	GATE(CLK_UART1, "uart1", "aclk66_peric", GATE_IP_PERIC, 1, 0, 0),
+	GATE(CLK_UART2, "uart2", "aclk66_peric", GATE_IP_PERIC, 2, 0, 0),
+	GATE(CLK_UART3, "uart3", "aclk66_peric", GATE_IP_PERIC, 3, 0, 0),
+	GATE(CLK_I2C0, "i2c0", "aclk66_peric", GATE_IP_PERIC, 6, 0, 0),
+	GATE(CLK_I2C1, "i2c1", "aclk66_peric", GATE_IP_PERIC, 7, 0, 0),
+	GATE(CLK_I2C2, "i2c2", "aclk66_peric", GATE_IP_PERIC, 8, 0, 0),
+	GATE(CLK_I2C3, "i2c3", "aclk66_peric", GATE_IP_PERIC, 9, 0, 0),
+	GATE(CLK_USI0, "usi0", "aclk66_peric", GATE_IP_PERIC, 10, 0, 0),
+	GATE(CLK_USI1, "usi1", "aclk66_peric", GATE_IP_PERIC, 11, 0, 0),
+	GATE(CLK_USI2, "usi2", "aclk66_peric", GATE_IP_PERIC, 12, 0, 0),
+	GATE(CLK_USI3, "usi3", "aclk66_peric", GATE_IP_PERIC, 13, 0, 0),
+	GATE(CLK_I2C_HDMI, "i2c_hdmi", "aclk66_peric", GATE_IP_PERIC, 14, 0, 0),
+	GATE(CLK_TSADC, "tsadc", "aclk66_peric", GATE_IP_PERIC, 15, 0, 0),
+	GATE(CLK_SPI0, "spi0", "aclk66_peric", GATE_IP_PERIC, 16, 0, 0),
+	GATE(CLK_SPI1, "spi1", "aclk66_peric", GATE_IP_PERIC, 17, 0, 0),
+	GATE(CLK_SPI2, "spi2", "aclk66_peric", GATE_IP_PERIC, 18, 0, 0),
+	GATE(CLK_I2S1, "i2s1", "aclk66_peric", GATE_IP_PERIC, 20, 0, 0),
+	GATE(CLK_I2S2, "i2s2", "aclk66_peric", GATE_IP_PERIC, 21, 0, 0),
+	GATE(CLK_PCM1, "pcm1", "aclk66_peric", GATE_IP_PERIC, 22, 0, 0),
+	GATE(CLK_PCM2, "pcm2", "aclk66_peric", GATE_IP_PERIC, 23, 0, 0),
+	GATE(CLK_PWM, "pwm", "aclk66_peric", GATE_IP_PERIC, 24, 0, 0),
+	GATE(CLK_SPDIF, "spdif", "aclk66_peric", GATE_IP_PERIC, 26, 0, 0),
+	GATE(CLK_USI4, "usi4", "aclk66_peric", GATE_IP_PERIC, 28, 0, 0),
+	GATE(CLK_USI5, "usi5", "aclk66_peric", GATE_IP_PERIC, 30, 0, 0),
+	GATE(CLK_USI6, "usi6", "aclk66_peric", GATE_IP_PERIC, 31, 0, 0),
 
+	GATE(CLK_KEYIF, "keyif", "aclk66_peric", GATE_BUS_PERIC, 22, 0, 0),
+
+	/* PERIS Block */
 	GATE(CLK_CHIPID, "chipid", "aclk66_psgen",
-			GATE_BUS_PERIS0, 12, CLK_IGNORE_UNUSED, 0),
+			GATE_IP_PERIS, 0, CLK_IGNORE_UNUSED, 0),
 	GATE(CLK_SYSREG, "sysreg", "aclk66_psgen",
-			GATE_BUS_PERIS0, 13, CLK_IGNORE_UNUSED, 0),
-	GATE(CLK_TZPC0, "tzpc0", "aclk66_psgen", GATE_BUS_PERIS0, 18, 0, 0),
-	GATE(CLK_TZPC1, "tzpc1", "aclk66_psgen", GATE_BUS_PERIS0, 19, 0, 0),
-	GATE(CLK_TZPC2, "tzpc2", "aclk66_psgen", GATE_BUS_PERIS0, 20, 0, 0),
-	GATE(CLK_TZPC3, "tzpc3", "aclk66_psgen", GATE_BUS_PERIS0, 21, 0, 0),
-	GATE(CLK_TZPC4, "tzpc4", "aclk66_psgen", GATE_BUS_PERIS0, 22, 0, 0),
-	GATE(CLK_TZPC5, "tzpc5", "aclk66_psgen", GATE_BUS_PERIS0, 23, 0, 0),
-	GATE(CLK_TZPC6, "tzpc6", "aclk66_psgen", GATE_BUS_PERIS0, 24, 0, 0),
-	GATE(CLK_TZPC7, "tzpc7", "aclk66_psgen", GATE_BUS_PERIS0, 25, 0, 0),
-	GATE(CLK_TZPC8, "tzpc8", "aclk66_psgen", GATE_BUS_PERIS0, 26, 0, 0),
-	GATE(CLK_TZPC9, "tzpc9", "aclk66_psgen", GATE_BUS_PERIS0, 27, 0, 0),
-
-	GATE(CLK_HDMI_CEC, "hdmi_cec", "aclk66_psgen", GATE_BUS_PERIS1, 0, 0,
-		0),
+			GATE_IP_PERIS, 1, CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_TZPC0, "tzpc0", "aclk66_psgen", GATE_IP_PERIS, 6, 0, 0),
+	GATE(CLK_TZPC1, "tzpc1", "aclk66_psgen", GATE_IP_PERIS, 7, 0, 0),
+	GATE(CLK_TZPC2, "tzpc2", "aclk66_psgen", GATE_IP_PERIS, 8, 0, 0),
+	GATE(CLK_TZPC3, "tzpc3", "aclk66_psgen", GATE_IP_PERIS, 9, 0, 0),
+	GATE(CLK_TZPC4, "tzpc4", "aclk66_psgen", GATE_IP_PERIS, 10, 0, 0),
+	GATE(CLK_TZPC5, "tzpc5", "aclk66_psgen", GATE_IP_PERIS, 11, 0, 0),
+	GATE(CLK_TZPC6, "tzpc6", "aclk66_psgen", GATE_IP_PERIS, 12, 0, 0),
+	GATE(CLK_TZPC7, "tzpc7", "aclk66_psgen", GATE_IP_PERIS, 13, 0, 0),
+	GATE(CLK_TZPC8, "tzpc8", "aclk66_psgen", GATE_IP_PERIS, 14, 0, 0),
+	GATE(CLK_TZPC9, "tzpc9", "aclk66_psgen", GATE_IP_PERIS, 15, 0, 0),
+	GATE(CLK_HDMI_CEC, "hdmi_cec", "aclk66_psgen", GATE_IP_PERIS, 16, 0, 0),
+	GATE(CLK_MCT, "mct", "aclk66_psgen", GATE_IP_PERIS, 18, 0, 0),
+	GATE(CLK_WDT, "wdt", "aclk66_psgen", GATE_IP_PERIS, 19, 0, 0),
+	GATE(CLK_RTC, "rtc", "aclk66_psgen", GATE_IP_PERIS, 20, 0, 0),
+	GATE(CLK_TMU, "tmu", "aclk66_psgen", GATE_IP_PERIS, 21, 0, 0),
+	GATE(CLK_TMU_GPU, "tmu_gpu", "aclk66_psgen", GATE_IP_PERIS, 22, 0, 0),
+
 	GATE(CLK_SECKEY, "seckey", "aclk66_psgen", GATE_BUS_PERIS1, 1, 0, 0),
-	GATE(CLK_WDT, "wdt", "aclk66_psgen", GATE_BUS_PERIS1, 3, 0, 0),
-	GATE(CLK_RTC, "rtc", "aclk66_psgen", GATE_BUS_PERIS1, 4, 0, 0),
-	GATE(CLK_TMU, "tmu", "aclk66_psgen", GATE_BUS_PERIS1, 5, 0, 0),
-	GATE(CLK_TMU_GPU, "tmu_gpu", "aclk66_psgen", GATE_BUS_PERIS1, 6, 0, 0),
+
+	/* GEN Block */
+	GATE(CLK_ROTATOR, "rotator", "mout_user_aclk266", GATE_IP_GEN, 1, 0, 0),
+	GATE(CLK_JPEG, "jpeg", "aclk300_jpeg", GATE_IP_GEN, 2, 0, 0),
+	GATE(CLK_JPEG2, "jpeg2", "aclk300_jpeg", GATE_IP_GEN, 3, 0, 0),
+	GATE(CLK_MDMA1, "mdma1", "mout_user_aclk266", GATE_IP_GEN, 4, 0, 0),
+	GATE(CLK_TOP_RTC, "top_rtc", "aclk66_psgen", GATE_IP_GEN, 5, 0, 0),
+	GATE(CLK_SMMU_ROTATOR, "smmu_rotator", "dout_gen_blk",
+			GATE_IP_GEN, 6, 0, 0),
+	GATE(CLK_SMMU_JPEG, "smmu_jpeg", "dout_jpg_blk", GATE_IP_GEN, 7, 0, 0),
+	GATE(CLK_SMMU_MDMA1, "smmu_mdma1", "dout_gen_blk",
+			GATE_IP_GEN, 9, 0, 0),
+
+	/* GATE_IP_GEN doesn't list gates for smmu_jpeg2 and mc */
+	GATE(CLK_SMMU_JPEG2, "smmu_jpeg2", "dout_jpg_blk",
+			GATE_BUS_GEN, 28, 0, 0),
+	GATE(CLK_MC, "mc", "aclk66_psgen", GATE_BUS_GEN, 12, 0, 0),
+
+	/* GSCL Block */
+	GATE(CLK_SCLK_GSCL_WA, "sclk_gscl_wa", "mout_user_aclk333_432_gscl",
+			GATE_TOP_SCLK_GSCL, 6, 0, 0),
+	GATE(CLK_SCLK_GSCL_WB, "sclk_gscl_wb", "mout_user_aclk333_432_gscl",
+			GATE_TOP_SCLK_GSCL, 7, 0, 0),
 
 	GATE(CLK_GSCL0, "gscl0", "aclk300_gscl", GATE_IP_GSCL0, 0, 0, 0),
 	GATE(CLK_GSCL1, "gscl1", "aclk300_gscl", GATE_IP_GSCL0, 1, 0, 0),
-	GATE(CLK_CLK_3AA, "clk_3aa", "aclk300_gscl", GATE_IP_GSCL0, 4, 0, 0),
-
-	GATE(CLK_SMMU_3AA, "smmu_3aa", "aclk333_432_gscl", GATE_IP_GSCL1, 2, 0,
-		0),
-	GATE(CLK_SMMU_FIMCL0, "smmu_fimcl0", "aclk333_432_gscl",
+	GATE(CLK_FIMC_3AA, "fimc_3aa", "aclk333_432_gscl",
+			GATE_IP_GSCL0, 4, 0, 0),
+	GATE(CLK_FIMC_LITE0, "fimc_lite0", "aclk333_432_gscl",
+			GATE_IP_GSCL0, 5, 0, 0),
+	GATE(CLK_FIMC_LITE1, "fimc_lite1", "aclk333_432_gscl",
+			GATE_IP_GSCL0, 6, 0, 0),
+
+	GATE(CLK_SMMU_3AA, "smmu_3aa", "dout_gscl_blk_333",
+			GATE_IP_GSCL1, 2, 0, 0),
+	GATE(CLK_SMMU_FIMCL0, "smmu_fimcl0", "dout_gscl_blk_333",
 			GATE_IP_GSCL1, 3, 0, 0),
-	GATE(CLK_SMMU_FIMCL1, "smmu_fimcl1", "aclk333_432_gscl",
+	GATE(CLK_SMMU_FIMCL1, "smmu_fimcl1", "dout_gscl_blk_333",
 			GATE_IP_GSCL1, 4, 0, 0),
-	GATE(CLK_SMMU_GSCL0, "smmu_gscl0", "aclk300_gscl", GATE_IP_GSCL1, 6, 0,
-		0),
-	GATE(CLK_SMMU_GSCL1, "smmu_gscl1", "aclk300_gscl", GATE_IP_GSCL1, 7, 0,
-		0),
-	GATE(CLK_GSCL_WA, "gscl_wa", "aclk300_gscl", GATE_IP_GSCL1, 12, 0, 0),
-	GATE(CLK_GSCL_WB, "gscl_wb", "aclk300_gscl", GATE_IP_GSCL1, 13, 0, 0),
-	GATE(CLK_SMMU_FIMCL3, "smmu_fimcl3,", "aclk333_432_gscl",
+	GATE(CLK_SMMU_GSCL0, "smmu_gscl0", "dout_gscl_blk_300",
+			GATE_IP_GSCL1, 6, 0, 0),
+	GATE(CLK_SMMU_GSCL1, "smmu_gscl1", "dout_gscl_blk_300",
+			GATE_IP_GSCL1, 7, 0, 0),
+	GATE(CLK_GSCL_WA, "gscl_wa", "sclk_gscl_wa", GATE_IP_GSCL1, 12, 0, 0),
+	GATE(CLK_GSCL_WB, "gscl_wb", "sclk_gscl_wb", GATE_IP_GSCL1, 13, 0, 0),
+	GATE(CLK_SMMU_FIMCL3, "smmu_fimcl3,", "dout_gscl_blk_333",
 			GATE_IP_GSCL1, 16, 0, 0),
 	GATE(CLK_FIMC_LITE3, "fimc_lite3", "aclk333_432_gscl",
 			GATE_IP_GSCL1, 17, 0, 0),
 
+	/* MSCL Block */
+	GATE(CLK_MSCL0, "mscl0", "aclk400_mscl", GATE_IP_MSCL, 0, 0, 0),
+	GATE(CLK_MSCL1, "mscl1", "aclk400_mscl", GATE_IP_MSCL, 1, 0, 0),
+	GATE(CLK_MSCL2, "mscl2", "aclk400_mscl", GATE_IP_MSCL, 2, 0, 0),
+	GATE(CLK_SMMU_MSCL0, "smmu_mscl0", "dout_mscl_blk",
+			GATE_IP_MSCL, 8, 0, 0),
+	GATE(CLK_SMMU_MSCL1, "smmu_mscl1", "dout_mscl_blk",
+			GATE_IP_MSCL, 9, 0, 0),
+	GATE(CLK_SMMU_MSCL2, "smmu_mscl2", "dout_mscl_blk",
+			GATE_IP_MSCL, 10, 0, 0),
+
 	GATE(CLK_FIMD1, "fimd1", "aclk300_disp1", GATE_IP_DISP1, 0, 0, 0),
 	GATE(CLK_DSIM1, "dsim1", "aclk200_disp1", GATE_IP_DISP1, 3, 0, 0),
 	GATE(CLK_DP1, "dp1", "aclk200_disp1", GATE_IP_DISP1, 4, 0, 0),
-	GATE(CLK_MIXER, "mixer", "aclk166", GATE_IP_DISP1, 5, 0, 0),
+	GATE(CLK_MIXER, "mixer", "aclk200_disp1", GATE_IP_DISP1, 5, 0, 0),
 	GATE(CLK_HDMI, "hdmi", "aclk200_disp1", GATE_IP_DISP1, 6, 0, 0),
-	GATE(CLK_SMMU_FIMD1, "smmu_fimd1", "aclk300_disp1", GATE_IP_DISP1, 8, 0,
-		0),
+	GATE(CLK_SMMU_FIMD1M0, "smmu_fimd1m0", "dout_disp1_blk",
+			GATE_IP_DISP1, 7, 0, 0),
+	GATE(CLK_SMMU_FIMD1M1, "smmu_fimd1m1", "dout_disp1_blk",
+			GATE_IP_DISP1, 8, 0, 0),
+	GATE(CLK_SMMU_MIXER, "smmu_mixer", "aclk200_disp1",
+			GATE_IP_DISP1, 9, 0, 0),
+
+	/* ISP */
+	GATE(CLK_SCLK_UART_ISP, "sclk_uart_isp", "dout_uart_isp",
+			GATE_TOP_SCLK_ISP, 0, CLK_SET_RATE_PARENT, 0),
+	GATE(CLK_SCLK_SPI0_ISP, "sclk_spi0_isp", "dout_spi0_isp_pre",
+			GATE_TOP_SCLK_ISP, 1, CLK_SET_RATE_PARENT, 0),
+	GATE(CLK_SCLK_SPI1_ISP, "sclk_spi1_isp", "dout_spi1_isp_pre",
+			GATE_TOP_SCLK_ISP, 2, CLK_SET_RATE_PARENT, 0),
+	GATE(CLK_SCLK_PWM_ISP, "sclk_pwm_isp", "dout_pwm_isp",
+			GATE_TOP_SCLK_ISP, 3, CLK_SET_RATE_PARENT, 0),
+	GATE(CLK_SCLK_ISP_SENSOR0, "sclk_isp_sensor0", "dout_isp_sensor0",
+			GATE_TOP_SCLK_ISP, 4, CLK_SET_RATE_PARENT, 0),
+	GATE(CLK_SCLK_ISP_SENSOR1, "sclk_isp_sensor1", "dout_isp_sensor1",
+			GATE_TOP_SCLK_ISP, 8, CLK_SET_RATE_PARENT, 0),
+	GATE(CLK_SCLK_ISP_SENSOR2, "sclk_isp_sensor2", "dout_isp_sensor2",
+			GATE_TOP_SCLK_ISP, 12, CLK_SET_RATE_PARENT, 0),
 
 	GATE(CLK_MFC, "mfc", "aclk333", GATE_IP_MFC, 0, 0, 0),
-	GATE(CLK_SMMU_MFCL, "smmu_mfcl", "aclk333", GATE_IP_MFC, 1, 0, 0),
-	GATE(CLK_SMMU_MFCR, "smmu_mfcr", "aclk333", GATE_IP_MFC, 2, 0, 0),
-
-	GATE(CLK_G3D, "g3d", "aclkg3d", GATE_IP_G3D, 9, 0, 0),
+	GATE(CLK_SMMU_MFCL, "smmu_mfcl", "dout_mfc_blk", GATE_IP_MFC, 1, 0, 0),
+	GATE(CLK_SMMU_MFCR, "smmu_mfcr", "dout_mfc_blk", GATE_IP_MFC, 2, 0, 0),
 
-	GATE(CLK_ROTATOR, "rotator", "aclk266", GATE_IP_GEN, 1, 0, 0),
-	GATE(CLK_JPEG, "jpeg", "aclk300_jpeg", GATE_IP_GEN, 2, 0, 0),
-	GATE(CLK_JPEG2, "jpeg2", "aclk300_jpeg", GATE_IP_GEN, 3, 0, 0),
-	GATE(CLK_MDMA1, "mdma1", "aclk266", GATE_IP_GEN, 4, 0, 0),
-	GATE(CLK_SMMU_ROTATOR, "smmu_rotator", "aclk266", GATE_IP_GEN, 6, 0, 0),
-	GATE(CLK_SMMU_JPEG, "smmu_jpeg", "aclk300_jpeg", GATE_IP_GEN, 7, 0, 0),
-	GATE(CLK_SMMU_MDMA1, "smmu_mdma1", "aclk266", GATE_IP_GEN, 9, 0, 0),
-
-	GATE(CLK_MSCL0, "mscl0", "aclk400_mscl", GATE_IP_MSCL, 0, 0, 0),
-	GATE(CLK_MSCL1, "mscl1", "aclk400_mscl", GATE_IP_MSCL, 1, 0, 0),
-	GATE(CLK_MSCL2, "mscl2", "aclk400_mscl", GATE_IP_MSCL, 2, 0, 0),
-	GATE(CLK_SMMU_MSCL0, "smmu_mscl0", "aclk400_mscl", GATE_IP_MSCL, 8, 0,
-		0),
-	GATE(CLK_SMMU_MSCL1, "smmu_mscl1", "aclk400_mscl", GATE_IP_MSCL, 9, 0,
-		0),
-	GATE(CLK_SMMU_MSCL2, "smmu_mscl2", "aclk400_mscl", GATE_IP_MSCL, 10, 0,
-		0),
-	GATE(CLK_SMMU_MIXER, "smmu_mixer", "aclk200_disp1", GATE_IP_DISP1, 9, 0,
-		0),
+	GATE(CLK_G3D, "g3d", "mout_user_aclk_g3d", GATE_IP_G3D, 9, 0, 0),
 };
 
-static struct samsung_pll_clock exynos5420_plls[nr_plls] __initdata = {
+static struct samsung_pll_clock exynos5x_plls[nr_plls] __initdata = {
 	[apll] = PLL(pll_2550, CLK_FOUT_APLL, "fout_apll", "fin_pll", APLL_LOCK,
 		APLL_CON0, NULL),
 	[cpll] = PLL(pll_2550, CLK_FOUT_CPLL, "fout_cpll", "fin_pll", CPLL_LOCK,
@@ -776,8 +1173,11 @@ static struct of_device_id ext_clk_match[] __initdata = {
 };
 
 /* register exynos5420 clocks */
-static void __init exynos5420_clk_init(struct device_node *np)
+static void __init exynos5x_clk_init(struct device_node *np,
+		enum exynos5x_soc soc)
 {
+	struct samsung_clk_provider *ctx;
+
 	if (np) {
 		reg_base = of_iomap(np, 0);
 		if (!reg_base)
@@ -786,23 +1186,56 @@ static void __init exynos5420_clk_init(struct device_node *np)
 		panic("%s: unable to determine soc\n", __func__);
 	}
 
-	samsung_clk_init(np, reg_base, CLK_NR_CLKS);
-	samsung_clk_of_register_fixed_ext(exynos5420_fixed_rate_ext_clks,
-			ARRAY_SIZE(exynos5420_fixed_rate_ext_clks),
+	exynos5x_soc = soc;
+
+	ctx = samsung_clk_init(np, reg_base, CLK_NR_CLKS);
+	if (!ctx)
+		panic("%s: unable to allocate context.\n", __func__);
+
+	samsung_clk_of_register_fixed_ext(ctx, exynos5x_fixed_rate_ext_clks,
+			ARRAY_SIZE(exynos5x_fixed_rate_ext_clks),
 			ext_clk_match);
-	samsung_clk_register_pll(exynos5420_plls, ARRAY_SIZE(exynos5420_plls),
+	samsung_clk_register_pll(ctx, exynos5x_plls, ARRAY_SIZE(exynos5x_plls),
 					reg_base);
-	samsung_clk_register_fixed_rate(exynos5420_fixed_rate_clks,
-			ARRAY_SIZE(exynos5420_fixed_rate_clks));
-	samsung_clk_register_fixed_factor(exynos5420_fixed_factor_clks,
-			ARRAY_SIZE(exynos5420_fixed_factor_clks));
-	samsung_clk_register_mux(exynos5420_mux_clks,
-			ARRAY_SIZE(exynos5420_mux_clks));
-	samsung_clk_register_div(exynos5420_div_clks,
-			ARRAY_SIZE(exynos5420_div_clks));
-	samsung_clk_register_gate(exynos5420_gate_clks,
-			ARRAY_SIZE(exynos5420_gate_clks));
+	samsung_clk_register_fixed_rate(ctx, exynos5x_fixed_rate_clks,
+			ARRAY_SIZE(exynos5x_fixed_rate_clks));
+	samsung_clk_register_fixed_factor(ctx, exynos5x_fixed_factor_clks,
+			ARRAY_SIZE(exynos5x_fixed_factor_clks));
+	samsung_clk_register_mux(ctx, exynos5x_mux_clks,
+			ARRAY_SIZE(exynos5x_mux_clks));
+	samsung_clk_register_div(ctx, exynos5x_div_clks,
+			ARRAY_SIZE(exynos5x_div_clks));
+	samsung_clk_register_gate(ctx, exynos5x_gate_clks,
+			ARRAY_SIZE(exynos5x_gate_clks));
+
+	if (soc == EXYNOS5420) {
+		samsung_clk_register_mux(ctx, exynos5420_mux_clks,
+				ARRAY_SIZE(exynos5420_mux_clks));
+		samsung_clk_register_div(ctx, exynos5420_div_clks,
+				ARRAY_SIZE(exynos5420_div_clks));
+	} else {
+		samsung_clk_register_fixed_factor(
+				ctx, exynos5800_fixed_factor_clks,
+				ARRAY_SIZE(exynos5800_fixed_factor_clks));
+		samsung_clk_register_mux(ctx, exynos5800_mux_clks,
+				ARRAY_SIZE(exynos5800_mux_clks));
+		samsung_clk_register_div(ctx, exynos5800_div_clks,
+				ARRAY_SIZE(exynos5800_div_clks));
+		samsung_clk_register_gate(ctx, exynos5800_gate_clks,
+				ARRAY_SIZE(exynos5800_gate_clks));
+	}
 
 	exynos5420_clk_sleep_init();
 }
+
+static void __init exynos5420_clk_init(struct device_node *np)
+{
+	exynos5x_clk_init(np, EXYNOS5420);
+}
 CLK_OF_DECLARE(exynos5420_clk, "samsung,exynos5420-clock", exynos5420_clk_init);
+
+static void __init exynos5800_clk_init(struct device_node *np)
+{
+	exynos5x_clk_init(np, EXYNOS5800);
+}
+CLK_OF_DECLARE(exynos5800_clk, "samsung,exynos5800-clock", exynos5800_clk_init);

drivers/clk/samsung/clk-exynos5440.c

@@ -93,6 +93,7 @@ static struct of_device_id ext_clk_match[] __initdata = {
 static void __init exynos5440_clk_init(struct device_node *np)
 {
 	void __iomem *reg_base;
+	struct samsung_clk_provider *ctx;
 
 	reg_base = of_iomap(np, 0);
 	if (!reg_base) {
@@ -101,22 +102,25 @@ static void __init exynos5440_clk_init(struct device_node *np)
 		return;
 	}
 
-	samsung_clk_init(np, reg_base, CLK_NR_CLKS);
-	samsung_clk_of_register_fixed_ext(exynos5440_fixed_rate_ext_clks,
+	ctx = samsung_clk_init(np, reg_base, CLK_NR_CLKS);
+	if (!ctx)
+		panic("%s: unable to allocate context.\n", __func__);
+
+	samsung_clk_of_register_fixed_ext(ctx, exynos5440_fixed_rate_ext_clks,
 		ARRAY_SIZE(exynos5440_fixed_rate_ext_clks), ext_clk_match);
 
 	samsung_clk_register_pll2550x("cplla", "xtal", reg_base + 0x1c, 0x10);
 	samsung_clk_register_pll2550x("cpllb", "xtal", reg_base + 0x20, 0x10);
 
-	samsung_clk_register_fixed_rate(exynos5440_fixed_rate_clks,
+	samsung_clk_register_fixed_rate(ctx, exynos5440_fixed_rate_clks,
 			ARRAY_SIZE(exynos5440_fixed_rate_clks));
-	samsung_clk_register_fixed_factor(exynos5440_fixed_factor_clks,
+	samsung_clk_register_fixed_factor(ctx, exynos5440_fixed_factor_clks,
 			ARRAY_SIZE(exynos5440_fixed_factor_clks));
-	samsung_clk_register_mux(exynos5440_mux_clks,
+	samsung_clk_register_mux(ctx, exynos5440_mux_clks,
 			ARRAY_SIZE(exynos5440_mux_clks));
-	samsung_clk_register_div(exynos5440_div_clks,
+	samsung_clk_register_div(ctx, exynos5440_div_clks,
 			ARRAY_SIZE(exynos5440_div_clks));
-	samsung_clk_register_gate(exynos5440_gate_clks,
+	samsung_clk_register_gate(ctx, exynos5440_gate_clks,
 			ARRAY_SIZE(exynos5440_gate_clks));
 
 	pr_info("Exynos5440: arm_clk = %ldHz\n", _get_rate("arm_clk"));

drivers/clk/samsung/clk-pll.c

@@ -11,6 +11,7 @@
 
 #include <linux/errno.h>
 #include <linux/hrtimer.h>
+#include <linux/delay.h>
 #include "clk.h"
 #include "clk-pll.h"
 
@@ -58,6 +59,72 @@ static long samsung_pll_round_rate(struct clk_hw *hw,
 	return rate_table[i - 1].rate;
 }
 
+/*
+ * PLL2126 Clock Type
+ */
+
+#define PLL2126_MDIV_MASK	(0xff)
+#define PLL2126_PDIV_MASK	(0x3f)
+#define PLL2126_SDIV_MASK	(0x3)
+#define PLL2126_MDIV_SHIFT	(16)
+#define PLL2126_PDIV_SHIFT	(8)
+#define PLL2126_SDIV_SHIFT	(0)
+
+static unsigned long samsung_pll2126_recalc_rate(struct clk_hw *hw,
+				unsigned long parent_rate)
+{
+	struct samsung_clk_pll *pll = to_clk_pll(hw);
+	u32 pll_con, mdiv, pdiv, sdiv;
+	u64 fvco = parent_rate;
+
+	pll_con = __raw_readl(pll->con_reg);
+	mdiv = (pll_con >> PLL2126_MDIV_SHIFT) & PLL2126_MDIV_MASK;
+	pdiv = (pll_con >> PLL2126_PDIV_SHIFT) & PLL2126_PDIV_MASK;
+	sdiv = (pll_con >> PLL2126_SDIV_SHIFT) & PLL2126_SDIV_MASK;
+
+	fvco *= (mdiv + 8);
+	do_div(fvco, (pdiv + 2) << sdiv);
+
+	return (unsigned long)fvco;
+}
+
+static const struct clk_ops samsung_pll2126_clk_ops = {
+	.recalc_rate = samsung_pll2126_recalc_rate,
+};
+
+/*
+ * PLL3000 Clock Type
+ */
+
+#define PLL3000_MDIV_MASK	(0xff)
+#define PLL3000_PDIV_MASK	(0x3)
+#define PLL3000_SDIV_MASK	(0x3)
+#define PLL3000_MDIV_SHIFT	(16)
+#define PLL3000_PDIV_SHIFT	(8)
+#define PLL3000_SDIV_SHIFT	(0)
+
+static unsigned long samsung_pll3000_recalc_rate(struct clk_hw *hw,
+				unsigned long parent_rate)
+{
+	struct samsung_clk_pll *pll = to_clk_pll(hw);
+	u32 pll_con, mdiv, pdiv, sdiv;
+	u64 fvco = parent_rate;
+
+	pll_con = __raw_readl(pll->con_reg);
+	mdiv = (pll_con >> PLL3000_MDIV_SHIFT) & PLL3000_MDIV_MASK;
+	pdiv = (pll_con >> PLL3000_PDIV_SHIFT) & PLL3000_PDIV_MASK;
+	sdiv = (pll_con >> PLL3000_SDIV_SHIFT) & PLL3000_SDIV_MASK;
+
+	fvco *= (2 * (mdiv + 8));
+	do_div(fvco, pdiv << sdiv);
+
+	return (unsigned long)fvco;
+}
+
+static const struct clk_ops samsung_pll3000_clk_ops = {
+	.recalc_rate = samsung_pll3000_recalc_rate,
+};
+
 /*
  * PLL35xx Clock Type
  */
@@ -564,7 +631,9 @@ static const struct clk_ops samsung_pll46xx_clk_min_ops = {
 #define PLL6552_PDIV_MASK	0x3f
 #define PLL6552_SDIV_MASK	0x7
 #define PLL6552_MDIV_SHIFT	16
+#define PLL6552_MDIV_SHIFT_2416	14
 #define PLL6552_PDIV_SHIFT	8
+#define PLL6552_PDIV_SHIFT_2416	5
 #define PLL6552_SDIV_SHIFT	0
 
 static unsigned long samsung_pll6552_recalc_rate(struct clk_hw *hw,
@@ -575,8 +644,13 @@ static unsigned long samsung_pll6552_recalc_rate(struct clk_hw *hw,
 	u64 fvco = parent_rate;
 
 	pll_con = __raw_readl(pll->con_reg);
-	mdiv = (pll_con >> PLL6552_MDIV_SHIFT) & PLL6552_MDIV_MASK;
-	pdiv = (pll_con >> PLL6552_PDIV_SHIFT) & PLL6552_PDIV_MASK;
+	if (pll->type == pll_6552_s3c2416) {
+		mdiv = (pll_con >> PLL6552_MDIV_SHIFT_2416) & PLL6552_MDIV_MASK;
+		pdiv = (pll_con >> PLL6552_PDIV_SHIFT_2416) & PLL6552_PDIV_MASK;
+	} else {
+		mdiv = (pll_con >> PLL6552_MDIV_SHIFT) & PLL6552_MDIV_MASK;
+		pdiv = (pll_con >> PLL6552_PDIV_SHIFT) & PLL6552_PDIV_MASK;
+	}
 	sdiv = (pll_con >> PLL6552_SDIV_SHIFT) & PLL6552_SDIV_MASK;
 
 	fvco *= mdiv;
@@ -627,6 +701,169 @@ static const struct clk_ops samsung_pll6553_clk_ops = {
 	.recalc_rate = samsung_pll6553_recalc_rate,
 };
 
+/*
+ * PLL Clock Type of S3C24XX before S3C2443
+ */
+
+#define PLLS3C2410_MDIV_MASK		(0xff)
+#define PLLS3C2410_PDIV_MASK		(0x1f)
+#define PLLS3C2410_SDIV_MASK		(0x3)
+#define PLLS3C2410_MDIV_SHIFT		(12)
+#define PLLS3C2410_PDIV_SHIFT		(4)
+#define PLLS3C2410_SDIV_SHIFT		(0)
+
+#define PLLS3C2410_ENABLE_REG_OFFSET	0x10
+
+static unsigned long samsung_s3c2410_pll_recalc_rate(struct clk_hw *hw,
+					unsigned long parent_rate)
+{
+	struct samsung_clk_pll *pll = to_clk_pll(hw);
+	u32 pll_con, mdiv, pdiv, sdiv;
+	u64 fvco = parent_rate;
+
+	pll_con = __raw_readl(pll->con_reg);
+	mdiv = (pll_con >> PLLS3C2410_MDIV_SHIFT) & PLLS3C2410_MDIV_MASK;
+	pdiv = (pll_con >> PLLS3C2410_PDIV_SHIFT) & PLLS3C2410_PDIV_MASK;
+	sdiv = (pll_con >> PLLS3C2410_SDIV_SHIFT) & PLLS3C2410_SDIV_MASK;
+
+	fvco *= (mdiv + 8);
+	do_div(fvco, (pdiv + 2) << sdiv);
+
+	return (unsigned int)fvco;
+}
+
+static unsigned long samsung_s3c2440_mpll_recalc_rate(struct clk_hw *hw,
+					unsigned long parent_rate)
+{
+	struct samsung_clk_pll *pll = to_clk_pll(hw);
+	u32 pll_con, mdiv, pdiv, sdiv;
+	u64 fvco = parent_rate;
+
+	pll_con = __raw_readl(pll->con_reg);
+	mdiv = (pll_con >> PLLS3C2410_MDIV_SHIFT) & PLLS3C2410_MDIV_MASK;
+	pdiv = (pll_con >> PLLS3C2410_PDIV_SHIFT) & PLLS3C2410_PDIV_MASK;
+	sdiv = (pll_con >> PLLS3C2410_SDIV_SHIFT) & PLLS3C2410_SDIV_MASK;
+
+	fvco *= (2 * (mdiv + 8));
+	do_div(fvco, (pdiv + 2) << sdiv);
+
+	return (unsigned int)fvco;
+}
+
+static int samsung_s3c2410_pll_set_rate(struct clk_hw *hw, unsigned long drate,
+					unsigned long prate)
+{
+	struct samsung_clk_pll *pll = to_clk_pll(hw);
+	const struct samsung_pll_rate_table *rate;
+	u32 tmp;
+
+	/* Get required rate settings from table */
+	rate = samsung_get_pll_settings(pll, drate);
+	if (!rate) {
+		pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__,
+			drate, __clk_get_name(hw->clk));
+		return -EINVAL;
+	}
+
+	tmp = __raw_readl(pll->con_reg);
+
+	/* Change PLL PMS values */
+	tmp &= ~((PLLS3C2410_MDIV_MASK << PLLS3C2410_MDIV_SHIFT) |
+			(PLLS3C2410_PDIV_MASK << PLLS3C2410_PDIV_SHIFT) |
+			(PLLS3C2410_SDIV_MASK << PLLS3C2410_SDIV_SHIFT));
+	tmp |= (rate->mdiv << PLLS3C2410_MDIV_SHIFT) |
+			(rate->pdiv << PLLS3C2410_PDIV_SHIFT) |
+			(rate->sdiv << PLLS3C2410_SDIV_SHIFT);
+	__raw_writel(tmp, pll->con_reg);
+
+	/* Time to settle according to the manual */
+	udelay(300);
+
+	return 0;
+}
+
+static int samsung_s3c2410_pll_enable(struct clk_hw *hw, int bit, bool enable)
+{
+	struct samsung_clk_pll *pll = to_clk_pll(hw);
+	u32 pll_en = __raw_readl(pll->lock_reg + PLLS3C2410_ENABLE_REG_OFFSET);
+	u32 pll_en_orig = pll_en;
+
+	if (enable)
+		pll_en &= ~BIT(bit);
+	else
+		pll_en |= BIT(bit);
+
+	__raw_writel(pll_en, pll->lock_reg + PLLS3C2410_ENABLE_REG_OFFSET);
+
+	/* if we started the UPLL, then allow to settle */
+	if (enable && (pll_en_orig & BIT(bit)))
+		udelay(300);
+
+	return 0;
+}
+
+static int samsung_s3c2410_mpll_enable(struct clk_hw *hw)
+{
+	return samsung_s3c2410_pll_enable(hw, 5, true);
+}
+
+static void samsung_s3c2410_mpll_disable(struct clk_hw *hw)
+{
+	samsung_s3c2410_pll_enable(hw, 5, false);
+}
+
+static int samsung_s3c2410_upll_enable(struct clk_hw *hw)
+{
+	return samsung_s3c2410_pll_enable(hw, 7, true);
+}
+
+static void samsung_s3c2410_upll_disable(struct clk_hw *hw)
+{
+	samsung_s3c2410_pll_enable(hw, 7, false);
+}
+
+static const struct clk_ops samsung_s3c2410_mpll_clk_min_ops = {
+	.recalc_rate = samsung_s3c2410_pll_recalc_rate,
+	.enable = samsung_s3c2410_mpll_enable,
+	.disable = samsung_s3c2410_mpll_disable,
+};
+
+static const struct clk_ops samsung_s3c2410_upll_clk_min_ops = {
+	.recalc_rate = samsung_s3c2410_pll_recalc_rate,
+	.enable = samsung_s3c2410_upll_enable,
+	.disable = samsung_s3c2410_upll_disable,
+};
+
+static const struct clk_ops samsung_s3c2440_mpll_clk_min_ops = {
+	.recalc_rate = samsung_s3c2440_mpll_recalc_rate,
+	.enable = samsung_s3c2410_mpll_enable,
+	.disable = samsung_s3c2410_mpll_disable,
+};
+
+static const struct clk_ops samsung_s3c2410_mpll_clk_ops = {
+	.recalc_rate = samsung_s3c2410_pll_recalc_rate,
+	.enable = samsung_s3c2410_mpll_enable,
+	.disable = samsung_s3c2410_mpll_disable,
+	.round_rate = samsung_pll_round_rate,
+	.set_rate = samsung_s3c2410_pll_set_rate,
+};
+
+static const struct clk_ops samsung_s3c2410_upll_clk_ops = {
+	.recalc_rate = samsung_s3c2410_pll_recalc_rate,
+	.enable = samsung_s3c2410_upll_enable,
+	.disable = samsung_s3c2410_upll_disable,
+	.round_rate = samsung_pll_round_rate,
+	.set_rate = samsung_s3c2410_pll_set_rate,
+};
+
+static const struct clk_ops samsung_s3c2440_mpll_clk_ops = {
+	.recalc_rate = samsung_s3c2440_mpll_recalc_rate,
+	.enable = samsung_s3c2410_mpll_enable,
+	.disable = samsung_s3c2410_mpll_disable,
+	.round_rate = samsung_pll_round_rate,
+	.set_rate = samsung_s3c2410_pll_set_rate,
+};
+
 /*
  * PLL2550x Clock Type
  */
@@ -710,8 +947,206 @@ struct clk * __init samsung_clk_register_pll2550x(const char *name,
 	return clk;
 }
 
-static void __init _samsung_clk_register_pll(struct samsung_pll_clock *pll_clk,
-						void __iomem *base)
+/*
+ * PLL2550xx Clock Type
+ */
+
+/* Maximum lock time can be 270 * PDIV cycles */
+#define PLL2550XX_LOCK_FACTOR 270
+
+#define PLL2550XX_M_MASK		0x3FF
+#define PLL2550XX_P_MASK		0x3F
+#define PLL2550XX_S_MASK		0x7
+#define PLL2550XX_LOCK_STAT_MASK	0x1
+#define PLL2550XX_M_SHIFT		9
+#define PLL2550XX_P_SHIFT		3
+#define PLL2550XX_S_SHIFT		0
+#define PLL2550XX_LOCK_STAT_SHIFT	21
+
+static unsigned long samsung_pll2550xx_recalc_rate(struct clk_hw *hw,
+				unsigned long parent_rate)
+{
+	struct samsung_clk_pll *pll = to_clk_pll(hw);
+	u32 mdiv, pdiv, sdiv, pll_con;
+	u64 fvco = parent_rate;
+
+	pll_con = __raw_readl(pll->con_reg);
+	mdiv = (pll_con >> PLL2550XX_M_SHIFT) & PLL2550XX_M_MASK;
+	pdiv = (pll_con >> PLL2550XX_P_SHIFT) & PLL2550XX_P_MASK;
+	sdiv = (pll_con >> PLL2550XX_S_SHIFT) & PLL2550XX_S_MASK;
+
+	fvco *= mdiv;
+	do_div(fvco, (pdiv << sdiv));
+
+	return (unsigned long)fvco;
+}
+
+static inline bool samsung_pll2550xx_mp_change(u32 mdiv, u32 pdiv, u32 pll_con)
+{
+	u32 old_mdiv, old_pdiv;
+
+	old_mdiv = (pll_con >> PLL2550XX_M_SHIFT) & PLL2550XX_M_MASK;
+	old_pdiv = (pll_con >> PLL2550XX_P_SHIFT) & PLL2550XX_P_MASK;
+
+	return mdiv != old_mdiv || pdiv != old_pdiv;
+}
+
+static int samsung_pll2550xx_set_rate(struct clk_hw *hw, unsigned long drate,
+					unsigned long prate)
+{
+	struct samsung_clk_pll *pll = to_clk_pll(hw);
+	const struct samsung_pll_rate_table *rate;
+	u32 tmp;
+
+	/* Get required rate settings from table */
+	rate = samsung_get_pll_settings(pll, drate);
+	if (!rate) {
+		pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__,
+			drate, __clk_get_name(hw->clk));
+		return -EINVAL;
+	}
+
+	tmp = __raw_readl(pll->con_reg);
+
+	if (!(samsung_pll2550xx_mp_change(rate->mdiv, rate->pdiv, tmp))) {
+		/* If only s change, change just s value only*/
+		tmp &= ~(PLL2550XX_S_MASK << PLL2550XX_S_SHIFT);
+		tmp |= rate->sdiv << PLL2550XX_S_SHIFT;
+		__raw_writel(tmp, pll->con_reg);
+
+		return 0;
+	}
+
+	/* Set PLL lock time. */
+	__raw_writel(rate->pdiv * PLL2550XX_LOCK_FACTOR, pll->lock_reg);
+
+	/* Change PLL PMS values */
+	tmp &= ~((PLL2550XX_M_MASK << PLL2550XX_M_SHIFT) |
+			(PLL2550XX_P_MASK << PLL2550XX_P_SHIFT) |
+			(PLL2550XX_S_MASK << PLL2550XX_S_SHIFT));
+	tmp |= (rate->mdiv << PLL2550XX_M_SHIFT) |
+			(rate->pdiv << PLL2550XX_P_SHIFT) |
+			(rate->sdiv << PLL2550XX_S_SHIFT);
+	__raw_writel(tmp, pll->con_reg);
+
+	/* wait_lock_time */
+	do {
+		cpu_relax();
+		tmp = __raw_readl(pll->con_reg);
+	} while (!(tmp & (PLL2550XX_LOCK_STAT_MASK
+			<< PLL2550XX_LOCK_STAT_SHIFT)));
+
+	return 0;
+}
+
+static const struct clk_ops samsung_pll2550xx_clk_ops = {
+	.recalc_rate = samsung_pll2550xx_recalc_rate,
+	.round_rate = samsung_pll_round_rate,
+	.set_rate = samsung_pll2550xx_set_rate,
+};
+
+static const struct clk_ops samsung_pll2550xx_clk_min_ops = {
+	.recalc_rate = samsung_pll2550xx_recalc_rate,
+};
+
+/*
+ * PLL2650XX Clock Type
+ */
+
+/* Maximum lock time can be 3000 * PDIV cycles */
+#define PLL2650XX_LOCK_FACTOR 3000
+
+#define PLL2650XX_MDIV_SHIFT		9
+#define PLL2650XX_PDIV_SHIFT		3
+#define PLL2650XX_SDIV_SHIFT		0
+#define PLL2650XX_KDIV_SHIFT		0
+#define PLL2650XX_MDIV_MASK		0x1ff
+#define PLL2650XX_PDIV_MASK		0x3f
+#define PLL2650XX_SDIV_MASK		0x7
+#define PLL2650XX_KDIV_MASK		0xffff
+#define PLL2650XX_PLL_ENABLE_SHIFT	23
+#define PLL2650XX_PLL_LOCKTIME_SHIFT	21
+#define PLL2650XX_PLL_FOUTMASK_SHIFT	31
+
+static unsigned long samsung_pll2650xx_recalc_rate(struct clk_hw *hw,
+				unsigned long parent_rate)
+{
+	struct samsung_clk_pll *pll = to_clk_pll(hw);
+	u32 mdiv, pdiv, sdiv, pll_con0, pll_con2;
+	s16 kdiv;
+	u64 fvco = parent_rate;
+
+	pll_con0 = __raw_readl(pll->con_reg);
+	pll_con2 = __raw_readl(pll->con_reg + 8);
+	mdiv = (pll_con0 >> PLL2650XX_MDIV_SHIFT) & PLL2650XX_MDIV_MASK;
+	pdiv = (pll_con0 >> PLL2650XX_PDIV_SHIFT) & PLL2650XX_PDIV_MASK;
+	sdiv = (pll_con0 >> PLL2650XX_SDIV_SHIFT) & PLL2650XX_SDIV_MASK;
+	kdiv = (s16)(pll_con2 & PLL2650XX_KDIV_MASK);
+
+	fvco *= (mdiv << 16) + kdiv;
+	do_div(fvco, (pdiv << sdiv));
+	fvco >>= 16;
+
+	return (unsigned long)fvco;
+}
+
+static int samsung_pll2650xx_set_rate(struct clk_hw *hw, unsigned long drate,
+					unsigned long parent_rate)
+{
+	struct samsung_clk_pll *pll = to_clk_pll(hw);
+	u32 tmp, pll_con0, pll_con2;
+	const struct samsung_pll_rate_table *rate;
+
+	rate = samsung_get_pll_settings(pll, drate);
+	if (!rate) {
+		pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__,
+			drate, __clk_get_name(hw->clk));
+		return -EINVAL;
+	}
+
+	pll_con0 = __raw_readl(pll->con_reg);
+	pll_con2 = __raw_readl(pll->con_reg + 8);
+
+	 /* Change PLL PMS values */
+	pll_con0 &= ~(PLL2650XX_MDIV_MASK << PLL2650XX_MDIV_SHIFT |
+			PLL2650XX_PDIV_MASK << PLL2650XX_PDIV_SHIFT |
+			PLL2650XX_SDIV_MASK << PLL2650XX_SDIV_SHIFT);
+	pll_con0 |= rate->mdiv << PLL2650XX_MDIV_SHIFT;
+	pll_con0 |= rate->pdiv << PLL2650XX_PDIV_SHIFT;
+	pll_con0 |= rate->sdiv << PLL2650XX_SDIV_SHIFT;
+	pll_con0 |= 1 << PLL2650XX_PLL_ENABLE_SHIFT;
+	pll_con0 |= 1 << PLL2650XX_PLL_FOUTMASK_SHIFT;
+
+	pll_con2 &= ~(PLL2650XX_KDIV_MASK << PLL2650XX_KDIV_SHIFT);
+	pll_con2 |= ((~(rate->kdiv) + 1) & PLL2650XX_KDIV_MASK)
+			<< PLL2650XX_KDIV_SHIFT;
+
+	/* Set PLL lock time. */
+	__raw_writel(PLL2650XX_LOCK_FACTOR * rate->pdiv, pll->lock_reg);
+
+	__raw_writel(pll_con0, pll->con_reg);
+	__raw_writel(pll_con2, pll->con_reg + 8);
+
+	do {
+		tmp = __raw_readl(pll->con_reg);
+	} while (!(tmp & (0x1 << PLL2650XX_PLL_LOCKTIME_SHIFT)));
+
+	return 0;
+}
+
+static const struct clk_ops samsung_pll2650xx_clk_ops = {
+	.recalc_rate = samsung_pll2650xx_recalc_rate,
+	.set_rate = samsung_pll2650xx_set_rate,
+	.round_rate = samsung_pll_round_rate,
+};
+
+static const struct clk_ops samsung_pll2650xx_clk_min_ops = {
+	.recalc_rate = samsung_pll2650xx_recalc_rate,
+};
+
+static void __init _samsung_clk_register_pll(struct samsung_clk_provider *ctx,
+				struct samsung_pll_clock *pll_clk,
+				void __iomem *base)
 {
 	struct samsung_clk_pll *pll;
 	struct clk *clk;
@@ -746,6 +1181,12 @@ static void __init _samsung_clk_register_pll(struct samsung_pll_clock *pll_clk,
 	}
 
 	switch (pll_clk->type) {
+	case pll_2126:
+		init.ops = &samsung_pll2126_clk_ops;
+		break;
+	case pll_3000:
+		init.ops = &samsung_pll3000_clk_ops;
+		break;
 	/* clk_ops for 35xx and 2550 are similar */
 	case pll_35xx:
 	case pll_2550:
@@ -773,6 +1214,7 @@ static void __init _samsung_clk_register_pll(struct samsung_pll_clock *pll_clk,
 			init.ops = &samsung_pll36xx_clk_ops;
 		break;
 	case pll_6552:
+	case pll_6552_s3c2416:
 		init.ops = &samsung_pll6552_clk_ops;
 		break;
 	case pll_6553:
@@ -786,6 +1228,36 @@ static void __init _samsung_clk_register_pll(struct samsung_pll_clock *pll_clk,
 		else
 			init.ops = &samsung_pll46xx_clk_ops;
 		break;
+	case pll_s3c2410_mpll:
+		if (!pll->rate_table)
+			init.ops = &samsung_s3c2410_mpll_clk_min_ops;
+		else
+			init.ops = &samsung_s3c2410_mpll_clk_ops;
+		break;
+	case pll_s3c2410_upll:
+		if (!pll->rate_table)
+			init.ops = &samsung_s3c2410_upll_clk_min_ops;
+		else
+			init.ops = &samsung_s3c2410_upll_clk_ops;
+		break;
+	case pll_s3c2440_mpll:
+		if (!pll->rate_table)
+			init.ops = &samsung_s3c2440_mpll_clk_min_ops;
+		else
+			init.ops = &samsung_s3c2440_mpll_clk_ops;
+		break;
+	case pll_2550xx:
+		if (!pll->rate_table)
+			init.ops = &samsung_pll2550xx_clk_min_ops;
+		else
+			init.ops = &samsung_pll2550xx_clk_ops;
+		break;
+	case pll_2650xx:
+		if (!pll->rate_table)
+			init.ops = &samsung_pll2650xx_clk_min_ops;
+		else
+			init.ops = &samsung_pll2650xx_clk_ops;
+		break;
 	default:
 		pr_warn("%s: Unknown pll type for pll clk %s\n",
 			__func__, pll_clk->name);
@@ -804,7 +1276,7 @@ static void __init _samsung_clk_register_pll(struct samsung_pll_clock *pll_clk,
 		return;
 	}
 
-	samsung_clk_add_lookup(clk, pll_clk->id);
+	samsung_clk_add_lookup(ctx, clk, pll_clk->id);
 
 	if (!pll_clk->alias)
 		return;
@@ -815,11 +1287,12 @@ static void __init _samsung_clk_register_pll(struct samsung_pll_clock *pll_clk,
 			__func__, pll_clk->name, ret);
 }
 
-void __init samsung_clk_register_pll(struct samsung_pll_clock *pll_list,
-				unsigned int nr_pll, void __iomem *base)
+void __init samsung_clk_register_pll(struct samsung_clk_provider *ctx,
+			struct samsung_pll_clock *pll_list,
+			unsigned int nr_pll, void __iomem *base)
 {
 	int cnt;
 
 	for (cnt = 0; cnt < nr_pll; cnt++)
-		_samsung_clk_register_pll(&pll_list[cnt], base);
+		_samsung_clk_register_pll(ctx, &pll_list[cnt], base);
 }

drivers/clk/samsung/clk-pll.h

@@ -13,6 +13,8 @@
 #define __SAMSUNG_CLK_PLL_H
 
 enum samsung_pll_type {
+	pll_2126,
+	pll_3000,
 	pll_35xx,
 	pll_36xx,
 	pll_2550,
@@ -24,7 +26,13 @@ enum samsung_pll_type {
 	pll_4650,
 	pll_4650c,
 	pll_6552,
+	pll_6552_s3c2416,
 	pll_6553,
+	pll_s3c2410_mpll,
+	pll_s3c2410_upll,
+	pll_s3c2440_mpll,
+	pll_2550xx,
+	pll_2650xx,
 };
 
 #define PLL_35XX_RATE(_rate, _m, _p, _s)			\

drivers/clk/samsung/clk-s3c2410-dclk.c

@@ -0,0 +1,440 @@
+/*
+ * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Common Clock Framework support for s3c24xx external clock output.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include "clk.h"
+
+/* legacy access to misccr, until dt conversion is finished */
+#include <mach/hardware.h>
+#include <mach/regs-gpio.h>
+
+#define MUX_DCLK0	0
+#define MUX_DCLK1	1
+#define DIV_DCLK0	2
+#define DIV_DCLK1	3
+#define GATE_DCLK0	4
+#define GATE_DCLK1	5
+#define MUX_CLKOUT0	6
+#define MUX_CLKOUT1	7
+#define DCLK_MAX_CLKS	(MUX_CLKOUT1 + 1)
+
+enum supported_socs {
+	S3C2410,
+	S3C2412,
+	S3C2440,
+	S3C2443,
+};
+
+struct s3c24xx_dclk_drv_data {
+	const char **clkout0_parent_names;
+	int clkout0_num_parents;
+	const char **clkout1_parent_names;
+	int clkout1_num_parents;
+	const char **mux_parent_names;
+	int mux_num_parents;
+};
+
+/*
+ * Clock for output-parent selection in misccr
+ */
+
+struct s3c24xx_clkout {
+	struct clk_hw		hw;
+	u32			mask;
+	u8			shift;
+};
+
+#define to_s3c24xx_clkout(_hw) container_of(_hw, struct s3c24xx_clkout, hw)
+
+static u8 s3c24xx_clkout_get_parent(struct clk_hw *hw)
+{
+	struct s3c24xx_clkout *clkout = to_s3c24xx_clkout(hw);
+	int num_parents = __clk_get_num_parents(hw->clk);
+	u32 val;
+
+	val = readl_relaxed(S3C24XX_MISCCR) >> clkout->shift;
+	val >>= clkout->shift;
+	val &= clkout->mask;
+
+	if (val >= num_parents)
+		return -EINVAL;
+
+	return val;
+}
+
+static int s3c24xx_clkout_set_parent(struct clk_hw *hw, u8 index)
+{
+	struct s3c24xx_clkout *clkout = to_s3c24xx_clkout(hw);
+	int ret = 0;
+
+	s3c2410_modify_misccr((clkout->mask << clkout->shift),
+			      (index << clkout->shift));
+
+	return ret;
+}
+
+const struct clk_ops s3c24xx_clkout_ops = {
+	.get_parent = s3c24xx_clkout_get_parent,
+	.set_parent = s3c24xx_clkout_set_parent,
+	.determine_rate = __clk_mux_determine_rate,
+};
+
+struct clk *s3c24xx_register_clkout(struct device *dev, const char *name,
+		const char **parent_names, u8 num_parents,
+		u8 shift, u32 mask)
+{
+	struct s3c24xx_clkout *clkout;
+	struct clk *clk;
+	struct clk_init_data init;
+
+	/* allocate the clkout */
+	clkout = kzalloc(sizeof(*clkout), GFP_KERNEL);
+	if (!clkout)
+		return ERR_PTR(-ENOMEM);
+
+	init.name = name;
+	init.ops = &s3c24xx_clkout_ops;
+	init.flags = CLK_IS_BASIC;
+	init.parent_names = parent_names;
+	init.num_parents = num_parents;
+
+	clkout->shift = shift;
+	clkout->mask = mask;
+	clkout->hw.init = &init;
+
+	clk = clk_register(dev, &clkout->hw);
+
+	return clk;
+}
+
+/*
+ * dclk and clkout init
+ */
+
+struct s3c24xx_dclk {
+	struct device *dev;
+	void __iomem *base;
+	struct clk_onecell_data clk_data;
+	struct notifier_block dclk0_div_change_nb;
+	struct notifier_block dclk1_div_change_nb;
+	spinlock_t dclk_lock;
+	unsigned long reg_save;
+};
+
+#define to_s3c24xx_dclk0(x) \
+		container_of(x, struct s3c24xx_dclk, dclk0_div_change_nb)
+
+#define to_s3c24xx_dclk1(x) \
+		container_of(x, struct s3c24xx_dclk, dclk1_div_change_nb)
+
+PNAME(dclk_s3c2410_p) = { "pclk", "uclk" };
+PNAME(clkout0_s3c2410_p) = { "mpll", "upll", "fclk", "hclk", "pclk",
+			     "gate_dclk0" };
+PNAME(clkout1_s3c2410_p) = { "mpll", "upll", "fclk", "hclk", "pclk",
+			     "gate_dclk1" };
+
+PNAME(clkout0_s3c2412_p) = { "mpll", "upll", "rtc_clkout",
+			     "hclk", "pclk", "gate_dclk0" };
+PNAME(clkout1_s3c2412_p) = { "xti", "upll", "fclk", "hclk", "pclk",
+			     "gate_dclk1" };
+
+PNAME(clkout0_s3c2440_p) = { "xti", "upll", "fclk", "hclk", "pclk",
+			     "gate_dclk0" };
+PNAME(clkout1_s3c2440_p) = { "mpll", "upll", "rtc_clkout",
+			     "hclk", "pclk", "gate_dclk1" };
+
+PNAME(dclk_s3c2443_p) = { "pclk", "epll" };
+PNAME(clkout0_s3c2443_p) = { "xti", "epll", "armclk", "hclk", "pclk",
+			     "gate_dclk0" };
+PNAME(clkout1_s3c2443_p) = { "dummy", "epll", "rtc_clkout",
+			     "hclk", "pclk", "gate_dclk1" };
+
+#define DCLKCON_DCLK_DIV_MASK		0xf
+#define DCLKCON_DCLK0_DIV_SHIFT		4
+#define DCLKCON_DCLK0_CMP_SHIFT		8
+#define DCLKCON_DCLK1_DIV_SHIFT		20
+#define DCLKCON_DCLK1_CMP_SHIFT		24
+
+static void s3c24xx_dclk_update_cmp(struct s3c24xx_dclk *s3c24xx_dclk,
+				    int div_shift, int cmp_shift)
+{
+	unsigned long flags = 0;
+	u32 dclk_con, div, cmp;
+
+	spin_lock_irqsave(&s3c24xx_dclk->dclk_lock, flags);
+
+	dclk_con = readl_relaxed(s3c24xx_dclk->base);
+
+	div = ((dclk_con >> div_shift) & DCLKCON_DCLK_DIV_MASK) + 1;
+	cmp = ((div + 1) / 2) - 1;
+
+	dclk_con &= ~(DCLKCON_DCLK_DIV_MASK << cmp_shift);
+	dclk_con |= (cmp << cmp_shift);
+
+	writel_relaxed(dclk_con, s3c24xx_dclk->base);
+
+	spin_unlock_irqrestore(&s3c24xx_dclk->dclk_lock, flags);
+}
+
+static int s3c24xx_dclk0_div_notify(struct notifier_block *nb,
+			       unsigned long event, void *data)
+{
+	struct s3c24xx_dclk *s3c24xx_dclk = to_s3c24xx_dclk0(nb);
+
+	if (event == POST_RATE_CHANGE) {
+		s3c24xx_dclk_update_cmp(s3c24xx_dclk,
+			DCLKCON_DCLK0_DIV_SHIFT, DCLKCON_DCLK0_CMP_SHIFT);
+	}
+
+	return NOTIFY_DONE;
+}
+
+static int s3c24xx_dclk1_div_notify(struct notifier_block *nb,
+			       unsigned long event, void *data)
+{
+	struct s3c24xx_dclk *s3c24xx_dclk = to_s3c24xx_dclk1(nb);
+
+	if (event == POST_RATE_CHANGE) {
+		s3c24xx_dclk_update_cmp(s3c24xx_dclk,
+			DCLKCON_DCLK1_DIV_SHIFT, DCLKCON_DCLK1_CMP_SHIFT);
+	}
+
+	return NOTIFY_DONE;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int s3c24xx_dclk_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct s3c24xx_dclk *s3c24xx_dclk = platform_get_drvdata(pdev);
+
+	s3c24xx_dclk->reg_save = readl_relaxed(s3c24xx_dclk->base);
+	return 0;
+}
+
+static int s3c24xx_dclk_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct s3c24xx_dclk *s3c24xx_dclk = platform_get_drvdata(pdev);
+
+	writel_relaxed(s3c24xx_dclk->reg_save, s3c24xx_dclk->base);
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(s3c24xx_dclk_pm_ops,
+			 s3c24xx_dclk_suspend, s3c24xx_dclk_resume);
+
+static int s3c24xx_dclk_probe(struct platform_device *pdev)
+{
+	struct s3c24xx_dclk *s3c24xx_dclk;
+	struct resource *mem;
+	struct clk **clk_table;
+	struct s3c24xx_dclk_drv_data *dclk_variant;
+	int ret, i;
+
+	s3c24xx_dclk = devm_kzalloc(&pdev->dev, sizeof(*s3c24xx_dclk),
+				    GFP_KERNEL);
+	if (!s3c24xx_dclk)
+		return -ENOMEM;
+
+	s3c24xx_dclk->dev = &pdev->dev;
+	platform_set_drvdata(pdev, s3c24xx_dclk);
+	spin_lock_init(&s3c24xx_dclk->dclk_lock);
+
+	clk_table = devm_kzalloc(&pdev->dev,
+				 sizeof(struct clk *) * DCLK_MAX_CLKS,
+				 GFP_KERNEL);
+	if (!clk_table)
+		return -ENOMEM;
+
+	s3c24xx_dclk->clk_data.clks = clk_table;
+	s3c24xx_dclk->clk_data.clk_num = DCLK_MAX_CLKS;
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	s3c24xx_dclk->base = devm_ioremap_resource(&pdev->dev, mem);
+	if (IS_ERR(s3c24xx_dclk->base))
+		return PTR_ERR(s3c24xx_dclk->base);
+
+	dclk_variant = (struct s3c24xx_dclk_drv_data *)
+				platform_get_device_id(pdev)->driver_data;
+
+
+	clk_table[MUX_DCLK0] = clk_register_mux(&pdev->dev, "mux_dclk0",
+				dclk_variant->mux_parent_names,
+				dclk_variant->mux_num_parents, 0,
+				s3c24xx_dclk->base, 1, 1, 0,
+				&s3c24xx_dclk->dclk_lock);
+	clk_table[MUX_DCLK1] = clk_register_mux(&pdev->dev, "mux_dclk1",
+				dclk_variant->mux_parent_names,
+				dclk_variant->mux_num_parents, 0,
+				s3c24xx_dclk->base, 17, 1, 0,
+				&s3c24xx_dclk->dclk_lock);
+
+	clk_table[DIV_DCLK0] = clk_register_divider(&pdev->dev, "div_dclk0",
+				"mux_dclk0", 0, s3c24xx_dclk->base,
+				4, 4, 0, &s3c24xx_dclk->dclk_lock);
+	clk_table[DIV_DCLK1] = clk_register_divider(&pdev->dev, "div_dclk1",
+				"mux_dclk1", 0, s3c24xx_dclk->base,
+				20, 4, 0, &s3c24xx_dclk->dclk_lock);
+
+	clk_table[GATE_DCLK0] = clk_register_gate(&pdev->dev, "gate_dclk0",
+				"div_dclk0", CLK_SET_RATE_PARENT,
+				s3c24xx_dclk->base, 0, 0,
+				&s3c24xx_dclk->dclk_lock);
+	clk_table[GATE_DCLK1] = clk_register_gate(&pdev->dev, "gate_dclk1",
+				"div_dclk1", CLK_SET_RATE_PARENT,
+				s3c24xx_dclk->base, 16, 0,
+				&s3c24xx_dclk->dclk_lock);
+
+	clk_table[MUX_CLKOUT0] = s3c24xx_register_clkout(&pdev->dev,
+				"clkout0", dclk_variant->clkout0_parent_names,
+				dclk_variant->clkout0_num_parents, 4, 7);
+	clk_table[MUX_CLKOUT1] = s3c24xx_register_clkout(&pdev->dev,
+				"clkout1", dclk_variant->clkout1_parent_names,
+				dclk_variant->clkout1_num_parents, 8, 7);
+
+	for (i = 0; i < DCLK_MAX_CLKS; i++)
+		if (IS_ERR(clk_table[i])) {
+			dev_err(&pdev->dev, "clock %d failed to register\n", i);
+			ret = PTR_ERR(clk_table[i]);
+			goto err_clk_register;
+		}
+
+	ret = clk_register_clkdev(clk_table[MUX_DCLK0], "dclk0", NULL);
+	if (!ret)
+		ret = clk_register_clkdev(clk_table[MUX_DCLK1], "dclk1", NULL);
+	if (!ret)
+		ret = clk_register_clkdev(clk_table[MUX_CLKOUT0],
+					  "clkout0", NULL);
+	if (!ret)
+		ret = clk_register_clkdev(clk_table[MUX_CLKOUT1],
+					  "clkout1", NULL);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register aliases, %d\n", ret);
+		goto err_clk_register;
+	}
+
+	s3c24xx_dclk->dclk0_div_change_nb.notifier_call =
+						s3c24xx_dclk0_div_notify;
+
+	s3c24xx_dclk->dclk1_div_change_nb.notifier_call =
+						s3c24xx_dclk1_div_notify;
+
+	ret = clk_notifier_register(clk_table[DIV_DCLK0],
+				    &s3c24xx_dclk->dclk0_div_change_nb);
+	if (ret)
+		goto err_clk_register;
+
+	ret = clk_notifier_register(clk_table[DIV_DCLK1],
+				    &s3c24xx_dclk->dclk1_div_change_nb);
+	if (ret)
+		goto err_dclk_notify;
+
+	return 0;
+
+err_dclk_notify:
+	clk_notifier_unregister(clk_table[DIV_DCLK0],
+				&s3c24xx_dclk->dclk0_div_change_nb);
+err_clk_register:
+	for (i = 0; i < DCLK_MAX_CLKS; i++)
+		if (clk_table[i] && !IS_ERR(clk_table[i]))
+			clk_unregister(clk_table[i]);
+
+	return ret;
+}
+
+static int s3c24xx_dclk_remove(struct platform_device *pdev)
+{
+	struct s3c24xx_dclk *s3c24xx_dclk = platform_get_drvdata(pdev);
+	struct clk **clk_table = s3c24xx_dclk->clk_data.clks;
+	int i;
+
+	clk_notifier_unregister(clk_table[DIV_DCLK1],
+				&s3c24xx_dclk->dclk1_div_change_nb);
+	clk_notifier_unregister(clk_table[DIV_DCLK0],
+				&s3c24xx_dclk->dclk0_div_change_nb);
+
+	for (i = 0; i < DCLK_MAX_CLKS; i++)
+		clk_unregister(clk_table[i]);
+
+	return 0;
+}
+
+static struct s3c24xx_dclk_drv_data dclk_variants[] = {
+	[S3C2410] = {
+		.clkout0_parent_names = clkout0_s3c2410_p,
+		.clkout0_num_parents = ARRAY_SIZE(clkout0_s3c2410_p),
+		.clkout1_parent_names = clkout1_s3c2410_p,
+		.clkout1_num_parents = ARRAY_SIZE(clkout1_s3c2410_p),
+		.mux_parent_names = dclk_s3c2410_p,
+		.mux_num_parents = ARRAY_SIZE(dclk_s3c2410_p),
+	},
+	[S3C2412] = {
+		.clkout0_parent_names = clkout0_s3c2412_p,
+		.clkout0_num_parents = ARRAY_SIZE(clkout0_s3c2412_p),
+		.clkout1_parent_names = clkout1_s3c2412_p,
+		.clkout1_num_parents = ARRAY_SIZE(clkout1_s3c2412_p),
+		.mux_parent_names = dclk_s3c2410_p,
+		.mux_num_parents = ARRAY_SIZE(dclk_s3c2410_p),
+	},
+	[S3C2440] = {
+		.clkout0_parent_names = clkout0_s3c2440_p,
+		.clkout0_num_parents = ARRAY_SIZE(clkout0_s3c2440_p),
+		.clkout1_parent_names = clkout1_s3c2440_p,
+		.clkout1_num_parents = ARRAY_SIZE(clkout1_s3c2440_p),
+		.mux_parent_names = dclk_s3c2410_p,
+		.mux_num_parents = ARRAY_SIZE(dclk_s3c2410_p),
+	},
+	[S3C2443] = {
+		.clkout0_parent_names = clkout0_s3c2443_p,
+		.clkout0_num_parents = ARRAY_SIZE(clkout0_s3c2443_p),
+		.clkout1_parent_names = clkout1_s3c2443_p,
+		.clkout1_num_parents = ARRAY_SIZE(clkout1_s3c2443_p),
+		.mux_parent_names = dclk_s3c2443_p,
+		.mux_num_parents = ARRAY_SIZE(dclk_s3c2443_p),
+	},
+};
+
+static struct platform_device_id s3c24xx_dclk_driver_ids[] = {
+	{
+		.name		= "s3c2410-dclk",
+		.driver_data	= (kernel_ulong_t)&dclk_variants[S3C2410],
+	}, {
+		.name		= "s3c2412-dclk",
+		.driver_data	= (kernel_ulong_t)&dclk_variants[S3C2412],
+	}, {
+		.name		= "s3c2440-dclk",
+		.driver_data	= (kernel_ulong_t)&dclk_variants[S3C2440],
+	}, {
+		.name		= "s3c2443-dclk",
+		.driver_data	= (kernel_ulong_t)&dclk_variants[S3C2443],
+	},
+	{ }
+};
+
+MODULE_DEVICE_TABLE(platform, s3c24xx_dclk_driver_ids);
+
+static struct platform_driver s3c24xx_dclk_driver = {
+	.driver = {
+		.name		= "s3c24xx-dclk",
+		.owner		= THIS_MODULE,
+		.pm		= &s3c24xx_dclk_pm_ops,
+	},
+	.probe = s3c24xx_dclk_probe,
+	.remove = s3c24xx_dclk_remove,
+	.id_table = s3c24xx_dclk_driver_ids,
+};
+module_platform_driver(s3c24xx_dclk_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Heiko Stuebner <heiko@sntech.de>");
+MODULE_DESCRIPTION("Driver for the S3C24XX external clock outputs");

drivers/clk/samsung/clk-s3c2410.c

@@ -0,0 +1,482 @@
+/*
+ * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Common Clock Framework support for S3C2410 and following SoCs.
+ */
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/syscore_ops.h>
+
+#include <dt-bindings/clock/s3c2410.h>
+
+#include "clk.h"
+#include "clk-pll.h"
+
+#define LOCKTIME	0x00
+#define MPLLCON		0x04
+#define UPLLCON		0x08
+#define CLKCON		0x0c
+#define CLKSLOW		0x10
+#define CLKDIVN		0x14
+#define CAMDIVN		0x18
+
+/* the soc types */
+enum supported_socs {
+	S3C2410,
+	S3C2440,
+	S3C2442,
+};
+
+/* list of PLLs to be registered */
+enum s3c2410_plls {
+	mpll, upll,
+};
+
+static void __iomem *reg_base;
+
+#ifdef CONFIG_PM_SLEEP
+static struct samsung_clk_reg_dump *s3c2410_save;
+
+/*
+ * list of controller registers to be saved and restored during a
+ * suspend/resume cycle.
+ */
+static unsigned long s3c2410_clk_regs[] __initdata = {
+	LOCKTIME,
+	MPLLCON,
+	UPLLCON,
+	CLKCON,
+	CLKSLOW,
+	CLKDIVN,
+	CAMDIVN,
+};
+
+static int s3c2410_clk_suspend(void)
+{
+	samsung_clk_save(reg_base, s3c2410_save,
+				ARRAY_SIZE(s3c2410_clk_regs));
+
+	return 0;
+}
+
+static void s3c2410_clk_resume(void)
+{
+	samsung_clk_restore(reg_base, s3c2410_save,
+				ARRAY_SIZE(s3c2410_clk_regs));
+}
+
+static struct syscore_ops s3c2410_clk_syscore_ops = {
+	.suspend = s3c2410_clk_suspend,
+	.resume = s3c2410_clk_resume,
+};
+
+static void s3c2410_clk_sleep_init(void)
+{
+	s3c2410_save = samsung_clk_alloc_reg_dump(s3c2410_clk_regs,
+						ARRAY_SIZE(s3c2410_clk_regs));
+	if (!s3c2410_save) {
+		pr_warn("%s: failed to allocate sleep save data, no sleep support!\n",
+			__func__);
+		return;
+	}
+
+	register_syscore_ops(&s3c2410_clk_syscore_ops);
+	return;
+}
+#else
+static void s3c2410_clk_sleep_init(void) {}
+#endif
+
+PNAME(fclk_p) = { "mpll", "div_slow" };
+
+struct samsung_mux_clock s3c2410_common_muxes[] __initdata = {
+	MUX(FCLK, "fclk", fclk_p, CLKSLOW, 4, 1),
+};
+
+static struct clk_div_table divslow_d[] = {
+	{ .val = 0, .div = 1 },
+	{ .val = 1, .div = 2 },
+	{ .val = 2, .div = 4 },
+	{ .val = 3, .div = 6 },
+	{ .val = 4, .div = 8 },
+	{ .val = 5, .div = 10 },
+	{ .val = 6, .div = 12 },
+	{ .val = 7, .div = 14 },
+	{ /* sentinel */ },
+};
+
+struct samsung_div_clock s3c2410_common_dividers[] __initdata = {
+	DIV_T(0, "div_slow", "xti", CLKSLOW, 0, 3, divslow_d),
+	DIV(PCLK, "pclk", "hclk", CLKDIVN, 0, 1),
+};
+
+struct samsung_gate_clock s3c2410_common_gates[] __initdata = {
+	GATE(PCLK_SPI, "spi", "pclk", CLKCON, 18, 0, 0),
+	GATE(PCLK_I2S, "i2s", "pclk", CLKCON, 17, 0, 0),
+	GATE(PCLK_I2C, "i2c", "pclk", CLKCON, 16, 0, 0),
+	GATE(PCLK_ADC, "adc", "pclk", CLKCON, 15, 0, 0),
+	GATE(PCLK_RTC, "rtc", "pclk", CLKCON, 14, 0, 0),
+	GATE(PCLK_GPIO, "gpio", "pclk", CLKCON, 13, CLK_IGNORE_UNUSED, 0),
+	GATE(PCLK_UART2, "uart2", "pclk", CLKCON, 12, 0, 0),
+	GATE(PCLK_UART1, "uart1", "pclk", CLKCON, 11, 0, 0),
+	GATE(PCLK_UART0, "uart0", "pclk", CLKCON, 10, 0, 0),
+	GATE(PCLK_SDI, "sdi", "pclk", CLKCON, 9, 0, 0),
+	GATE(PCLK_PWM, "pwm", "pclk", CLKCON, 8, 0, 0),
+	GATE(HCLK_USBD, "usb-device", "hclk", CLKCON, 7, 0, 0),
+	GATE(HCLK_USBH, "usb-host", "hclk", CLKCON, 6, 0, 0),
+	GATE(HCLK_LCD, "lcd", "hclk", CLKCON, 5, 0, 0),
+	GATE(HCLK_NAND, "nand", "hclk", CLKCON, 4, 0, 0),
+};
+
+/* should be added _after_ the soc-specific clocks are created */
+struct samsung_clock_alias s3c2410_common_aliases[] __initdata = {
+	ALIAS(PCLK_I2C, "s3c2410-i2c.0", "i2c"),
+	ALIAS(PCLK_ADC, NULL, "adc"),
+	ALIAS(PCLK_RTC, NULL, "rtc"),
+	ALIAS(PCLK_PWM, NULL, "timers"),
+	ALIAS(HCLK_LCD, NULL, "lcd"),
+	ALIAS(HCLK_USBD, NULL, "usb-device"),
+	ALIAS(HCLK_USBH, NULL, "usb-host"),
+	ALIAS(UCLK, NULL, "usb-bus-host"),
+	ALIAS(UCLK, NULL, "usb-bus-gadget"),
+	ALIAS(ARMCLK, NULL, "armclk"),
+	ALIAS(UCLK, NULL, "uclk"),
+	ALIAS(HCLK, NULL, "hclk"),
+	ALIAS(MPLL, NULL, "mpll"),
+	ALIAS(FCLK, NULL, "fclk"),
+};
+
+/* S3C2410 specific clocks */
+
+static struct samsung_pll_rate_table pll_s3c2410_12mhz_tbl[] __initdata = {
+	/* sorted in descending order */
+	/* 2410A extras */
+	PLL_35XX_RATE(270000000, 127, 1, 1),
+	PLL_35XX_RATE(268000000, 126, 1, 1),
+	PLL_35XX_RATE(266000000, 125, 1, 1),
+	PLL_35XX_RATE(226000000, 105, 1, 1),
+	PLL_35XX_RATE(210000000, 132, 2, 1),
+	/* 2410 common */
+	PLL_35XX_RATE(203000000, 161, 3, 1),
+	PLL_35XX_RATE(192000000, 88, 1, 1),
+	PLL_35XX_RATE(186000000, 85, 1, 1),
+	PLL_35XX_RATE(180000000, 82, 1, 1),
+	PLL_35XX_RATE(170000000, 77, 1, 1),
+	PLL_35XX_RATE(158000000, 71, 1, 1),
+	PLL_35XX_RATE(152000000, 68, 1, 1),
+	PLL_35XX_RATE(147000000, 90, 2, 1),
+	PLL_35XX_RATE(135000000, 82, 2, 1),
+	PLL_35XX_RATE(124000000, 116, 1, 2),
+	PLL_35XX_RATE(118000000, 150, 2, 2),
+	PLL_35XX_RATE(113000000, 105, 1, 2),
+	PLL_35XX_RATE(101000000, 127, 2, 2),
+	PLL_35XX_RATE(90000000, 112, 2, 2),
+	PLL_35XX_RATE(85000000, 105, 2, 2),
+	PLL_35XX_RATE(79000000, 71, 1, 2),
+	PLL_35XX_RATE(68000000, 82, 2, 2),
+	PLL_35XX_RATE(56000000, 142, 2, 3),
+	PLL_35XX_RATE(48000000, 120, 2, 3),
+	PLL_35XX_RATE(51000000, 161, 3, 3),
+	PLL_35XX_RATE(45000000, 82, 1, 3),
+	PLL_35XX_RATE(34000000, 82, 2, 3),
+	{ /* sentinel */ },
+};
+
+static struct samsung_pll_clock s3c2410_plls[] __initdata = {
+	[mpll] = PLL(pll_s3c2410_mpll, MPLL, "mpll", "xti",
+						LOCKTIME, MPLLCON, NULL),
+	[upll] = PLL(pll_s3c2410_upll, UPLL, "upll", "xti",
+						LOCKTIME, UPLLCON, NULL),
+};
+
+struct samsung_div_clock s3c2410_dividers[] __initdata = {
+	DIV(HCLK, "hclk", "mpll", CLKDIVN, 1, 1),
+};
+
+struct samsung_fixed_factor_clock s3c2410_ffactor[] __initdata = {
+	/*
+	 * armclk is directly supplied by the fclk, without
+	 * switching possibility like on the s3c244x below.
+	 */
+	FFACTOR(ARMCLK, "armclk", "fclk", 1, 1, 0),
+
+	/* uclk is fed from the unmodified upll */
+	FFACTOR(UCLK, "uclk", "upll", 1, 1, 0),
+};
+
+struct samsung_clock_alias s3c2410_aliases[] __initdata = {
+	ALIAS(PCLK_UART0, "s3c2410-uart.0", "uart"),
+	ALIAS(PCLK_UART1, "s3c2410-uart.1", "uart"),
+	ALIAS(PCLK_UART2, "s3c2410-uart.2", "uart"),
+	ALIAS(PCLK_UART0, "s3c2410-uart.0", "clk_uart_baud0"),
+	ALIAS(PCLK_UART1, "s3c2410-uart.1", "clk_uart_baud0"),
+	ALIAS(PCLK_UART2, "s3c2410-uart.2", "clk_uart_baud0"),
+	ALIAS(UCLK, NULL, "clk_uart_baud1"),
+};
+
+/* S3C244x specific clocks */
+
+static struct samsung_pll_rate_table pll_s3c244x_12mhz_tbl[] __initdata = {
+	/* sorted in descending order */
+	PLL_35XX_RATE(400000000, 0x5c, 1, 1),
+	PLL_35XX_RATE(390000000, 0x7a, 2, 1),
+	PLL_35XX_RATE(380000000, 0x57, 1, 1),
+	PLL_35XX_RATE(370000000, 0xb1, 4, 1),
+	PLL_35XX_RATE(360000000, 0x70, 2, 1),
+	PLL_35XX_RATE(350000000, 0xa7, 4, 1),
+	PLL_35XX_RATE(340000000, 0x4d, 1, 1),
+	PLL_35XX_RATE(330000000, 0x66, 2, 1),
+	PLL_35XX_RATE(320000000, 0x98, 4, 1),
+	PLL_35XX_RATE(310000000, 0x93, 4, 1),
+	PLL_35XX_RATE(300000000, 0x75, 3, 1),
+	PLL_35XX_RATE(240000000, 0x70, 1, 2),
+	PLL_35XX_RATE(230000000, 0x6b, 1, 2),
+	PLL_35XX_RATE(220000000, 0x66, 1, 2),
+	PLL_35XX_RATE(210000000, 0x84, 2, 2),
+	PLL_35XX_RATE(200000000, 0x5c, 1, 2),
+	PLL_35XX_RATE(190000000, 0x57, 1, 2),
+	PLL_35XX_RATE(180000000, 0x70, 2, 2),
+	PLL_35XX_RATE(170000000, 0x4d, 1, 2),
+	PLL_35XX_RATE(160000000, 0x98, 4, 2),
+	PLL_35XX_RATE(150000000, 0x75, 3, 2),
+	PLL_35XX_RATE(120000000, 0x70, 1, 3),
+	PLL_35XX_RATE(110000000, 0x66, 1, 3),
+	PLL_35XX_RATE(100000000, 0x5c, 1, 3),
+	PLL_35XX_RATE(90000000, 0x70, 2, 3),
+	PLL_35XX_RATE(80000000, 0x98, 4, 3),
+	PLL_35XX_RATE(75000000, 0x75, 3, 3),
+	{ /* sentinel */ },
+};
+
+static struct samsung_pll_clock s3c244x_common_plls[] __initdata = {
+	[mpll] = PLL(pll_s3c2440_mpll, MPLL, "mpll", "xti",
+						LOCKTIME, MPLLCON, NULL),
+	[upll] = PLL(pll_s3c2410_upll, UPLL, "upll", "xti",
+						LOCKTIME, UPLLCON, NULL),
+};
+
+PNAME(hclk_p) = { "fclk", "div_hclk_2", "div_hclk_4", "div_hclk_3" };
+PNAME(armclk_p) = { "fclk", "hclk" };
+
+struct samsung_mux_clock s3c244x_common_muxes[] __initdata = {
+	MUX(HCLK, "hclk", hclk_p, CLKDIVN, 1, 2),
+	MUX(ARMCLK, "armclk", armclk_p, CAMDIVN, 12, 1),
+};
+
+struct samsung_fixed_factor_clock s3c244x_common_ffactor[] __initdata = {
+	FFACTOR(0, "div_hclk_2", "fclk", 1, 2, 0),
+	FFACTOR(0, "ff_cam", "div_cam", 2, 1, CLK_SET_RATE_PARENT),
+};
+
+static struct clk_div_table div_hclk_4_d[] = {
+	{ .val = 0, .div = 4 },
+	{ .val = 1, .div = 8 },
+	{ /* sentinel */ },
+};
+
+static struct clk_div_table div_hclk_3_d[] = {
+	{ .val = 0, .div = 3 },
+	{ .val = 1, .div = 6 },
+	{ /* sentinel */ },
+};
+
+struct samsung_div_clock s3c244x_common_dividers[] __initdata = {
+	DIV(UCLK, "uclk", "upll", CLKDIVN, 3, 1),
+	DIV(0, "div_hclk", "fclk", CLKDIVN, 1, 1),
+	DIV_T(0, "div_hclk_4", "fclk", CAMDIVN, 9, 1, div_hclk_4_d),
+	DIV_T(0, "div_hclk_3", "fclk", CAMDIVN, 8, 1, div_hclk_3_d),
+	DIV(0, "div_cam", "upll", CAMDIVN, 0, 3),
+};
+
+struct samsung_gate_clock s3c244x_common_gates[] __initdata = {
+	GATE(HCLK_CAM, "cam", "hclk", CLKCON, 19, 0, 0),
+};
+
+struct samsung_clock_alias s3c244x_common_aliases[] __initdata = {
+	ALIAS(PCLK_UART0, "s3c2440-uart.0", "uart"),
+	ALIAS(PCLK_UART1, "s3c2440-uart.1", "uart"),
+	ALIAS(PCLK_UART2, "s3c2440-uart.2", "uart"),
+	ALIAS(PCLK_UART0, "s3c2440-uart.0", "clk_uart_baud2"),
+	ALIAS(PCLK_UART1, "s3c2440-uart.1", "clk_uart_baud2"),
+	ALIAS(PCLK_UART2, "s3c2440-uart.2", "clk_uart_baud2"),
+	ALIAS(HCLK_CAM, NULL, "camif"),
+	ALIAS(CAMIF, NULL, "camif-upll"),
+};
+
+/* S3C2440 specific clocks */
+
+PNAME(s3c2440_camif_p) = { "upll", "ff_cam" };
+
+struct samsung_mux_clock s3c2440_muxes[] __initdata = {
+	MUX(CAMIF, "camif", s3c2440_camif_p, CAMDIVN, 4, 1),
+};
+
+struct samsung_gate_clock s3c2440_gates[] __initdata = {
+	GATE(PCLK_AC97, "ac97", "pclk", CLKCON, 20, 0, 0),
+};
+
+/* S3C2442 specific clocks */
+
+struct samsung_fixed_factor_clock s3c2442_ffactor[] __initdata = {
+	FFACTOR(0, "upll_3", "upll", 1, 3, 0),
+};
+
+PNAME(s3c2442_camif_p) = { "upll", "ff_cam", "upll", "upll_3" };
+
+struct samsung_mux_clock s3c2442_muxes[] __initdata = {
+	MUX(CAMIF, "camif", s3c2442_camif_p, CAMDIVN, 4, 2),
+};
+
+/*
+ * fixed rate clocks generated outside the soc
+ * Only necessary until the devicetree-move is complete
+ */
+#define XTI	1
+struct samsung_fixed_rate_clock s3c2410_common_frate_clks[] __initdata = {
+	FRATE(XTI, "xti", NULL, CLK_IS_ROOT, 0),
+};
+
+static void __init s3c2410_common_clk_register_fixed_ext(
+		struct samsung_clk_provider *ctx,
+		unsigned long xti_f)
+{
+	struct samsung_clock_alias xti_alias = ALIAS(XTI, NULL, "xtal");
+
+	s3c2410_common_frate_clks[0].fixed_rate = xti_f;
+	samsung_clk_register_fixed_rate(ctx, s3c2410_common_frate_clks,
+				ARRAY_SIZE(s3c2410_common_frate_clks));
+
+	samsung_clk_register_alias(ctx, &xti_alias, 1);
+}
+
+void __init s3c2410_common_clk_init(struct device_node *np, unsigned long xti_f,
+				    int current_soc,
+				    void __iomem *base)
+{
+	struct samsung_clk_provider *ctx;
+	reg_base = base;
+
+	if (np) {
+		reg_base = of_iomap(np, 0);
+		if (!reg_base)
+			panic("%s: failed to map registers\n", __func__);
+	}
+
+	ctx = samsung_clk_init(np, reg_base, NR_CLKS);
+	if (!ctx)
+		panic("%s: unable to allocate context.\n", __func__);
+
+	/* Register external clocks only in non-dt cases */
+	if (!np)
+		s3c2410_common_clk_register_fixed_ext(ctx, xti_f);
+
+	if (current_soc == 2410) {
+		if (_get_rate("xti") == 12 * MHZ) {
+			s3c2410_plls[mpll].rate_table = pll_s3c2410_12mhz_tbl;
+			s3c2410_plls[upll].rate_table = pll_s3c2410_12mhz_tbl;
+		}
+
+		/* Register PLLs. */
+		samsung_clk_register_pll(ctx, s3c2410_plls,
+				ARRAY_SIZE(s3c2410_plls), reg_base);
+
+	} else { /* S3C2440, S3C2442 */
+		if (_get_rate("xti") == 12 * MHZ) {
+			/*
+			 * plls follow different calculation schemes, with the
+			 * upll following the same scheme as the s3c2410 plls
+			 */
+			s3c244x_common_plls[mpll].rate_table =
+							pll_s3c244x_12mhz_tbl;
+			s3c244x_common_plls[upll].rate_table =
+							pll_s3c2410_12mhz_tbl;
+		}
+
+		/* Register PLLs. */
+		samsung_clk_register_pll(ctx, s3c244x_common_plls,
+				ARRAY_SIZE(s3c244x_common_plls), reg_base);
+	}
+
+	/* Register common internal clocks. */
+	samsung_clk_register_mux(ctx, s3c2410_common_muxes,
+			ARRAY_SIZE(s3c2410_common_muxes));
+	samsung_clk_register_div(ctx, s3c2410_common_dividers,
+			ARRAY_SIZE(s3c2410_common_dividers));
+	samsung_clk_register_gate(ctx, s3c2410_common_gates,
+		ARRAY_SIZE(s3c2410_common_gates));
+
+	if (current_soc == S3C2440 || current_soc == S3C2442) {
+		samsung_clk_register_div(ctx, s3c244x_common_dividers,
+				ARRAY_SIZE(s3c244x_common_dividers));
+		samsung_clk_register_gate(ctx, s3c244x_common_gates,
+				ARRAY_SIZE(s3c244x_common_gates));
+		samsung_clk_register_mux(ctx, s3c244x_common_muxes,
+				ARRAY_SIZE(s3c244x_common_muxes));
+		samsung_clk_register_fixed_factor(ctx, s3c244x_common_ffactor,
+				ARRAY_SIZE(s3c244x_common_ffactor));
+	}
+
+	/* Register SoC-specific clocks. */
+	switch (current_soc) {
+	case S3C2410:
+		samsung_clk_register_div(ctx, s3c2410_dividers,
+				ARRAY_SIZE(s3c2410_dividers));
+		samsung_clk_register_fixed_factor(ctx, s3c2410_ffactor,
+				ARRAY_SIZE(s3c2410_ffactor));
+		samsung_clk_register_alias(ctx, s3c2410_aliases,
+			ARRAY_SIZE(s3c2410_common_aliases));
+		break;
+	case S3C2440:
+		samsung_clk_register_mux(ctx, s3c2440_muxes,
+				ARRAY_SIZE(s3c2440_muxes));
+		samsung_clk_register_gate(ctx, s3c2440_gates,
+				ARRAY_SIZE(s3c2440_gates));
+		break;
+	case S3C2442:
+		samsung_clk_register_mux(ctx, s3c2442_muxes,
+				ARRAY_SIZE(s3c2442_muxes));
+		samsung_clk_register_fixed_factor(ctx, s3c2442_ffactor,
+				ARRAY_SIZE(s3c2442_ffactor));
+		break;
+	}
+
+	/*
+	 * Register common aliases at the end, as some of the aliased clocks
+	 * are SoC specific.
+	 */
+	samsung_clk_register_alias(ctx, s3c2410_common_aliases,
+		ARRAY_SIZE(s3c2410_common_aliases));
+
+	if (current_soc == S3C2440 || current_soc == S3C2442) {
+		samsung_clk_register_alias(ctx, s3c244x_common_aliases,
+			ARRAY_SIZE(s3c244x_common_aliases));
+	}
+
+	s3c2410_clk_sleep_init();
+}
+
+static void __init s3c2410_clk_init(struct device_node *np)
+{
+	s3c2410_common_clk_init(np, 0, S3C2410, 0);
+}
+CLK_OF_DECLARE(s3c2410_clk, "samsung,s3c2410-clock", s3c2410_clk_init);
+
+static void __init s3c2440_clk_init(struct device_node *np)
+{
+	s3c2410_common_clk_init(np, 0, S3C2440, 0);
+}
+CLK_OF_DECLARE(s3c2440_clk, "samsung,s3c2440-clock", s3c2440_clk_init);
+
+static void __init s3c2442_clk_init(struct device_node *np)
+{
+	s3c2410_common_clk_init(np, 0, S3C2442, 0);
+}
+CLK_OF_DECLARE(s3c2442_clk, "samsung,s3c2442-clock", s3c2442_clk_init);

drivers/clk/samsung/clk-s3c2412.c

@@ -0,0 +1,274 @@
+/*
+ * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Common Clock Framework support for S3C2412 and S3C2413.
+ */
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/syscore_ops.h>
+
+#include <dt-bindings/clock/s3c2412.h>
+
+#include "clk.h"
+#include "clk-pll.h"
+
+#define LOCKTIME	0x00
+#define MPLLCON		0x04
+#define UPLLCON		0x08
+#define CLKCON		0x0c
+#define CLKDIVN		0x14
+#define CLKSRC		0x1c
+
+/* list of PLLs to be registered */
+enum s3c2412_plls {
+	mpll, upll,
+};
+
+static void __iomem *reg_base;
+
+#ifdef CONFIG_PM_SLEEP
+static struct samsung_clk_reg_dump *s3c2412_save;
+
+/*
+ * list of controller registers to be saved and restored during a
+ * suspend/resume cycle.
+ */
+static unsigned long s3c2412_clk_regs[] __initdata = {
+	LOCKTIME,
+	MPLLCON,
+	UPLLCON,
+	CLKCON,
+	CLKDIVN,
+	CLKSRC,
+};
+
+static int s3c2412_clk_suspend(void)
+{
+	samsung_clk_save(reg_base, s3c2412_save,
+				ARRAY_SIZE(s3c2412_clk_regs));
+
+	return 0;
+}
+
+static void s3c2412_clk_resume(void)
+{
+	samsung_clk_restore(reg_base, s3c2412_save,
+				ARRAY_SIZE(s3c2412_clk_regs));
+}
+
+static struct syscore_ops s3c2412_clk_syscore_ops = {
+	.suspend = s3c2412_clk_suspend,
+	.resume = s3c2412_clk_resume,
+};
+
+static void s3c2412_clk_sleep_init(void)
+{
+	s3c2412_save = samsung_clk_alloc_reg_dump(s3c2412_clk_regs,
+						ARRAY_SIZE(s3c2412_clk_regs));
+	if (!s3c2412_save) {
+		pr_warn("%s: failed to allocate sleep save data, no sleep support!\n",
+			__func__);
+		return;
+	}
+
+	register_syscore_ops(&s3c2412_clk_syscore_ops);
+	return;
+}
+#else
+static void s3c2412_clk_sleep_init(void) {}
+#endif
+
+static struct clk_div_table divxti_d[] = {
+	{ .val = 0, .div = 1 },
+	{ .val = 1, .div = 2 },
+	{ .val = 2, .div = 4 },
+	{ .val = 3, .div = 6 },
+	{ .val = 4, .div = 8 },
+	{ .val = 5, .div = 10 },
+	{ .val = 6, .div = 12 },
+	{ .val = 7, .div = 14 },
+	{ /* sentinel */ },
+};
+
+struct samsung_div_clock s3c2412_dividers[] __initdata = {
+	DIV_T(0, "div_xti", "xti", CLKSRC, 0, 3, divxti_d),
+	DIV(0, "div_cam", "mux_cam", CLKDIVN, 16, 4),
+	DIV(0, "div_i2s", "mux_i2s", CLKDIVN, 12, 4),
+	DIV(0, "div_uart", "mux_uart", CLKDIVN, 8, 4),
+	DIV(0, "div_usb", "mux_usb", CLKDIVN, 6, 1),
+	DIV(0, "div_hclk_half", "hclk", CLKDIVN, 5, 1),
+	DIV(ARMDIV, "armdiv", "msysclk", CLKDIVN, 3, 1),
+	DIV(PCLK, "pclk", "hclk", CLKDIVN, 2, 1),
+	DIV(HCLK, "hclk", "armdiv", CLKDIVN, 0, 2),
+};
+
+struct samsung_fixed_factor_clock s3c2412_ffactor[] __initdata = {
+	FFACTOR(0, "ff_hclk", "hclk", 2, 1, CLK_SET_RATE_PARENT),
+};
+
+/*
+ * The first two use the OM[4] setting, which is not readable from
+ * software, so assume it is set to xti.
+ */
+PNAME(erefclk_p) = { "xti", "xti", "xti", "ext" };
+PNAME(urefclk_p) = { "xti", "xti", "xti", "ext" };
+
+PNAME(camclk_p) = { "usysclk", "hclk" };
+PNAME(usbclk_p) = { "usysclk", "hclk" };
+PNAME(i2sclk_p) = { "erefclk", "mpll" };
+PNAME(uartclk_p) = { "erefclk", "mpll" };
+PNAME(usysclk_p) = { "urefclk", "upll" };
+PNAME(msysclk_p) = { "mdivclk", "mpll" };
+PNAME(mdivclk_p) = { "xti", "div_xti" };
+PNAME(armclk_p) = { "armdiv", "hclk" };
+
+struct samsung_mux_clock s3c2412_muxes[] __initdata = {
+	MUX(0, "erefclk", erefclk_p, CLKSRC, 14, 2),
+	MUX(0, "urefclk", urefclk_p, CLKSRC, 12, 2),
+	MUX(0, "mux_cam", camclk_p, CLKSRC, 11, 1),
+	MUX(0, "mux_usb", usbclk_p, CLKSRC, 10, 1),
+	MUX(0, "mux_i2s", i2sclk_p, CLKSRC, 9, 1),
+	MUX(0, "mux_uart", uartclk_p, CLKSRC, 8, 1),
+	MUX(USYSCLK, "usysclk", usysclk_p, CLKSRC, 5, 1),
+	MUX(MSYSCLK, "msysclk", msysclk_p, CLKSRC, 4, 1),
+	MUX(MDIVCLK, "mdivclk", mdivclk_p, CLKSRC, 3, 1),
+	MUX(ARMCLK, "armclk", armclk_p, CLKDIVN, 4, 1),
+};
+
+static struct samsung_pll_clock s3c2412_plls[] __initdata = {
+	[mpll] = PLL(pll_s3c2440_mpll, MPLL, "mpll", "xti",
+						LOCKTIME, MPLLCON, NULL),
+	[upll] = PLL(pll_s3c2410_upll, UPLL, "upll", "urefclk",
+						LOCKTIME, UPLLCON, NULL),
+};
+
+struct samsung_gate_clock s3c2412_gates[] __initdata = {
+	GATE(PCLK_WDT, "wdt", "pclk", CLKCON, 28, 0, 0),
+	GATE(PCLK_SPI, "spi", "pclk", CLKCON, 27, 0, 0),
+	GATE(PCLK_I2S, "i2s", "pclk", CLKCON, 26, 0, 0),
+	GATE(PCLK_I2C, "i2c", "pclk", CLKCON, 25, 0, 0),
+	GATE(PCLK_ADC, "adc", "pclk", CLKCON, 24, 0, 0),
+	GATE(PCLK_RTC, "rtc", "pclk", CLKCON, 23, 0, 0),
+	GATE(PCLK_GPIO, "gpio", "pclk", CLKCON, 22, CLK_IGNORE_UNUSED, 0),
+	GATE(PCLK_UART2, "uart2", "pclk", CLKCON, 21, 0, 0),
+	GATE(PCLK_UART1, "uart1", "pclk", CLKCON, 20, 0, 0),
+	GATE(PCLK_UART0, "uart0", "pclk", CLKCON, 19, 0, 0),
+	GATE(PCLK_SDI, "sdi", "pclk", CLKCON, 18, 0, 0),
+	GATE(PCLK_PWM, "pwm", "pclk", CLKCON, 17, 0, 0),
+	GATE(PCLK_USBD, "usb-device", "pclk", CLKCON, 16, 0, 0),
+	GATE(SCLK_CAM, "sclk_cam", "div_cam", CLKCON, 15, 0, 0),
+	GATE(SCLK_UART, "sclk_uart", "div_uart", CLKCON, 14, 0, 0),
+	GATE(SCLK_I2S, "sclk_i2s", "div_i2s", CLKCON, 13, 0, 0),
+	GATE(SCLK_USBH, "sclk_usbh", "div_usb", CLKCON, 12, 0, 0),
+	GATE(SCLK_USBD, "sclk_usbd", "div_usb", CLKCON, 11, 0, 0),
+	GATE(HCLK_HALF, "hclk_half", "div_hclk_half", CLKCON, 10, CLK_IGNORE_UNUSED, 0),
+	GATE(HCLK_X2, "hclkx2", "ff_hclk", CLKCON, 9, CLK_IGNORE_UNUSED, 0),
+	GATE(HCLK_SDRAM, "sdram", "hclk", CLKCON, 8, CLK_IGNORE_UNUSED, 0),
+	GATE(HCLK_USBH, "usb-host", "hclk", CLKCON, 6, 0, 0),
+	GATE(HCLK_LCD, "lcd", "hclk", CLKCON, 5, 0, 0),
+	GATE(HCLK_NAND, "nand", "hclk", CLKCON, 4, 0, 0),
+	GATE(HCLK_DMA3, "dma3", "hclk", CLKCON, 3, CLK_IGNORE_UNUSED, 0),
+	GATE(HCLK_DMA2, "dma2", "hclk", CLKCON, 2, CLK_IGNORE_UNUSED, 0),
+	GATE(HCLK_DMA1, "dma1", "hclk", CLKCON, 1, CLK_IGNORE_UNUSED, 0),
+	GATE(HCLK_DMA0, "dma0", "hclk", CLKCON, 0, CLK_IGNORE_UNUSED, 0),
+};
+
+struct samsung_clock_alias s3c2412_aliases[] __initdata = {
+	ALIAS(PCLK_UART0, "s3c2412-uart.0", "uart"),
+	ALIAS(PCLK_UART1, "s3c2412-uart.1", "uart"),
+	ALIAS(PCLK_UART2, "s3c2412-uart.2", "uart"),
+	ALIAS(PCLK_UART0, "s3c2412-uart.0", "clk_uart_baud2"),
+	ALIAS(PCLK_UART1, "s3c2412-uart.1", "clk_uart_baud2"),
+	ALIAS(PCLK_UART2, "s3c2412-uart.2", "clk_uart_baud2"),
+	ALIAS(SCLK_UART, NULL, "clk_uart_baud3"),
+	ALIAS(PCLK_I2C, "s3c2410-i2c.0", "i2c"),
+	ALIAS(PCLK_ADC, NULL, "adc"),
+	ALIAS(PCLK_RTC, NULL, "rtc"),
+	ALIAS(PCLK_PWM, NULL, "timers"),
+	ALIAS(HCLK_LCD, NULL, "lcd"),
+	ALIAS(PCLK_USBD, NULL, "usb-device"),
+	ALIAS(SCLK_USBD, NULL, "usb-bus-gadget"),
+	ALIAS(HCLK_USBH, NULL, "usb-host"),
+	ALIAS(SCLK_USBH, NULL, "usb-bus-host"),
+	ALIAS(ARMCLK, NULL, "armclk"),
+	ALIAS(HCLK, NULL, "hclk"),
+	ALIAS(MPLL, NULL, "mpll"),
+	ALIAS(MSYSCLK, NULL, "fclk"),
+};
+
+/*
+ * fixed rate clocks generated outside the soc
+ * Only necessary until the devicetree-move is complete
+ */
+#define XTI	1
+struct samsung_fixed_rate_clock s3c2412_common_frate_clks[] __initdata = {
+	FRATE(XTI, "xti", NULL, CLK_IS_ROOT, 0),
+	FRATE(0, "ext", NULL, CLK_IS_ROOT, 0),
+};
+
+static void __init s3c2412_common_clk_register_fixed_ext(
+		struct samsung_clk_provider *ctx,
+		unsigned long xti_f, unsigned long ext_f)
+{
+	/* xtal alias is necessary for the current cpufreq driver */
+	struct samsung_clock_alias xti_alias = ALIAS(XTI, NULL, "xtal");
+
+	s3c2412_common_frate_clks[0].fixed_rate = xti_f;
+	s3c2412_common_frate_clks[1].fixed_rate = ext_f;
+	samsung_clk_register_fixed_rate(ctx, s3c2412_common_frate_clks,
+				ARRAY_SIZE(s3c2412_common_frate_clks));
+
+	samsung_clk_register_alias(ctx, &xti_alias, 1);
+}
+
+void __init s3c2412_common_clk_init(struct device_node *np, unsigned long xti_f,
+				    unsigned long ext_f, void __iomem *base)
+{
+	struct samsung_clk_provider *ctx;
+	reg_base = base;
+
+	if (np) {
+		reg_base = of_iomap(np, 0);
+		if (!reg_base)
+			panic("%s: failed to map registers\n", __func__);
+	}
+
+	ctx = samsung_clk_init(np, reg_base, NR_CLKS);
+	if (!ctx)
+		panic("%s: unable to allocate context.\n", __func__);
+
+	/* Register external clocks only in non-dt cases */
+	if (!np)
+		s3c2412_common_clk_register_fixed_ext(ctx, xti_f, ext_f);
+
+	/* Register PLLs. */
+	samsung_clk_register_pll(ctx, s3c2412_plls, ARRAY_SIZE(s3c2412_plls),
+				 reg_base);
+
+	/* Register common internal clocks. */
+	samsung_clk_register_mux(ctx, s3c2412_muxes, ARRAY_SIZE(s3c2412_muxes));
+	samsung_clk_register_div(ctx, s3c2412_dividers,
+					  ARRAY_SIZE(s3c2412_dividers));
+	samsung_clk_register_gate(ctx, s3c2412_gates,
+					ARRAY_SIZE(s3c2412_gates));
+	samsung_clk_register_fixed_factor(ctx, s3c2412_ffactor,
+					  ARRAY_SIZE(s3c2412_ffactor));
+	samsung_clk_register_alias(ctx, s3c2412_aliases,
+				   ARRAY_SIZE(s3c2412_aliases));
+
+	s3c2412_clk_sleep_init();
+}
+
+static void __init s3c2412_clk_init(struct device_node *np)
+{
+	s3c2412_common_clk_init(np, 0, 0, 0);
+}
+CLK_OF_DECLARE(s3c2412_clk, "samsung,s3c2412-clock", s3c2412_clk_init);

drivers/clk/samsung/clk-s3c2443.c

@@ -0,0 +1,466 @@
+/*
+ * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Common Clock Framework support for S3C2443 and following SoCs.
+ */
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/syscore_ops.h>
+
+#include <dt-bindings/clock/s3c2443.h>
+
+#include "clk.h"
+#include "clk-pll.h"
+
+/* S3C2416 clock controller register offsets */
+#define LOCKCON0	0x00
+#define LOCKCON1	0x04
+#define MPLLCON		0x10
+#define EPLLCON		0x18
+#define EPLLCON_K	0x1C
+#define CLKSRC		0x20
+#define CLKDIV0		0x24
+#define CLKDIV1		0x28
+#define CLKDIV2		0x2C
+#define HCLKCON		0x30
+#define PCLKCON		0x34
+#define SCLKCON		0x38
+
+/* the soc types */
+enum supported_socs {
+	S3C2416,
+	S3C2443,
+	S3C2450,
+};
+
+/* list of PLLs to be registered */
+enum s3c2443_plls {
+	mpll, epll,
+};
+
+static void __iomem *reg_base;
+
+#ifdef CONFIG_PM_SLEEP
+static struct samsung_clk_reg_dump *s3c2443_save;
+
+/*
+ * list of controller registers to be saved and restored during a
+ * suspend/resume cycle.
+ */
+static unsigned long s3c2443_clk_regs[] __initdata = {
+	LOCKCON0,
+	LOCKCON1,
+	MPLLCON,
+	EPLLCON,
+	EPLLCON_K,
+	CLKSRC,
+	CLKDIV0,
+	CLKDIV1,
+	CLKDIV2,
+	PCLKCON,
+	HCLKCON,
+	SCLKCON,
+};
+
+static int s3c2443_clk_suspend(void)
+{
+	samsung_clk_save(reg_base, s3c2443_save,
+				ARRAY_SIZE(s3c2443_clk_regs));
+
+	return 0;
+}
+
+static void s3c2443_clk_resume(void)
+{
+	samsung_clk_restore(reg_base, s3c2443_save,
+				ARRAY_SIZE(s3c2443_clk_regs));
+}
+
+static struct syscore_ops s3c2443_clk_syscore_ops = {
+	.suspend = s3c2443_clk_suspend,
+	.resume = s3c2443_clk_resume,
+};
+
+static void s3c2443_clk_sleep_init(void)
+{
+	s3c2443_save = samsung_clk_alloc_reg_dump(s3c2443_clk_regs,
+						ARRAY_SIZE(s3c2443_clk_regs));
+	if (!s3c2443_save) {
+		pr_warn("%s: failed to allocate sleep save data, no sleep support!\n",
+			__func__);
+		return;
+	}
+
+	register_syscore_ops(&s3c2443_clk_syscore_ops);
+	return;
+}
+#else
+static void s3c2443_clk_sleep_init(void) {}
+#endif
+
+PNAME(epllref_p) = { "mpllref", "mpllref", "xti", "ext" };
+PNAME(esysclk_p) = { "epllref", "epll" };
+PNAME(mpllref_p) = { "xti", "mdivclk" };
+PNAME(msysclk_p) = { "mpllref", "mpll" };
+PNAME(armclk_p) = { "armdiv" , "hclk" };
+PNAME(i2s0_p) = { "div_i2s0", "ext_i2s", "epllref", "epllref" };
+
+struct samsung_mux_clock s3c2443_common_muxes[] __initdata = {
+	MUX(0, "epllref", epllref_p, CLKSRC, 7, 2),
+	MUX(ESYSCLK, "esysclk", esysclk_p, CLKSRC, 6, 1),
+	MUX(0, "mpllref", mpllref_p, CLKSRC, 3, 1),
+	MUX_A(MSYSCLK, "msysclk", msysclk_p, CLKSRC, 4, 1, "msysclk"),
+	MUX_A(ARMCLK, "armclk", armclk_p, CLKDIV0, 13, 1, "armclk"),
+	MUX(0, "mux_i2s0", i2s0_p, CLKSRC, 14, 2),
+};
+
+static struct clk_div_table hclk_d[] = {
+	{ .val = 0, .div = 1 },
+	{ .val = 1, .div = 2 },
+	{ .val = 3, .div = 4 },
+	{ /* sentinel */ },
+};
+
+static struct clk_div_table mdivclk_d[] = {
+	{ .val = 0, .div = 1 },
+	{ .val = 1, .div = 3 },
+	{ .val = 2, .div = 5 },
+	{ .val = 3, .div = 7 },
+	{ .val = 4, .div = 9 },
+	{ .val = 5, .div = 11 },
+	{ .val = 6, .div = 13 },
+	{ .val = 7, .div = 15 },
+	{ /* sentinel */ },
+};
+
+struct samsung_div_clock s3c2443_common_dividers[] __initdata = {
+	DIV_T(0, "mdivclk", "xti", CLKDIV0, 6, 3, mdivclk_d),
+	DIV(0, "prediv", "msysclk", CLKDIV0, 4, 2),
+	DIV_T(HCLK, "hclk", "prediv", CLKDIV0, 0, 2, hclk_d),
+	DIV(PCLK, "pclk", "hclk", CLKDIV0, 2, 1),
+	DIV(0, "div_hsspi0_epll", "esysclk", CLKDIV1, 24, 2),
+	DIV(0, "div_fimd", "esysclk", CLKDIV1, 16, 8),
+	DIV(0, "div_i2s0", "esysclk", CLKDIV1, 12, 4),
+	DIV(0, "div_uart", "esysclk", CLKDIV1, 8, 4),
+	DIV(0, "div_hsmmc1", "esysclk", CLKDIV1, 6, 2),
+	DIV(0, "div_usbhost", "esysclk", CLKDIV1, 4, 2),
+};
+
+struct samsung_gate_clock s3c2443_common_gates[] __initdata = {
+	GATE(SCLK_HSMMC_EXT, "sclk_hsmmcext", "ext", SCLKCON, 13, 0, 0),
+	GATE(SCLK_HSMMC1, "sclk_hsmmc1", "div_hsmmc1", SCLKCON, 12, 0, 0),
+	GATE(SCLK_FIMD, "sclk_fimd", "div_fimd", SCLKCON, 10, 0, 0),
+	GATE(SCLK_I2S0, "sclk_i2s0", "mux_i2s0", SCLKCON, 9, 0, 0),
+	GATE(SCLK_UART, "sclk_uart", "div_uart", SCLKCON, 8, 0, 0),
+	GATE(SCLK_USBH, "sclk_usbhost", "div_usbhost", SCLKCON, 1, 0, 0),
+	GATE(HCLK_DRAM, "dram", "hclk", HCLKCON, 19, CLK_IGNORE_UNUSED, 0),
+	GATE(HCLK_SSMC, "ssmc", "hclk", HCLKCON, 18, CLK_IGNORE_UNUSED, 0),
+	GATE(HCLK_HSMMC1, "hsmmc1", "hclk", HCLKCON, 16, 0, 0),
+	GATE(HCLK_USBD, "usb-device", "hclk", HCLKCON, 12, 0, 0),
+	GATE(HCLK_USBH, "usb-host", "hclk", HCLKCON, 11, 0, 0),
+	GATE(HCLK_LCD, "lcd", "hclk", HCLKCON, 9, 0, 0),
+	GATE(HCLK_DMA5, "dma5", "hclk", HCLKCON, 5, CLK_IGNORE_UNUSED, 0),
+	GATE(HCLK_DMA4, "dma4", "hclk", HCLKCON, 4, CLK_IGNORE_UNUSED, 0),
+	GATE(HCLK_DMA3, "dma3", "hclk", HCLKCON, 3, CLK_IGNORE_UNUSED, 0),
+	GATE(HCLK_DMA2, "dma2", "hclk", HCLKCON, 2, CLK_IGNORE_UNUSED, 0),
+	GATE(HCLK_DMA1, "dma1", "hclk", HCLKCON, 1, CLK_IGNORE_UNUSED, 0),
+	GATE(HCLK_DMA0, "dma0", "hclk", HCLKCON, 0, CLK_IGNORE_UNUSED, 0),
+	GATE(PCLK_GPIO, "gpio", "pclk", PCLKCON, 13, CLK_IGNORE_UNUSED, 0),
+	GATE(PCLK_RTC, "rtc", "pclk", PCLKCON, 12, 0, 0),
+	GATE(PCLK_WDT, "wdt", "pclk", PCLKCON, 11, 0, 0),
+	GATE(PCLK_PWM, "pwm", "pclk", PCLKCON, 10, 0, 0),
+	GATE(PCLK_I2S0, "i2s0", "pclk", PCLKCON, 9, 0, 0),
+	GATE(PCLK_AC97, "ac97", "pclk", PCLKCON, 8, 0, 0),
+	GATE(PCLK_ADC, "adc", "pclk", PCLKCON, 7, 0, 0),
+	GATE(PCLK_SPI0, "spi0", "pclk", PCLKCON, 6, 0, 0),
+	GATE(PCLK_I2C0, "i2c0", "pclk", PCLKCON, 4, 0, 0),
+	GATE(PCLK_UART3, "uart3", "pclk", PCLKCON, 3, 0, 0),
+	GATE(PCLK_UART2, "uart2", "pclk", PCLKCON, 2, 0, 0),
+	GATE(PCLK_UART1, "uart1", "pclk", PCLKCON, 1, 0, 0),
+	GATE(PCLK_UART0, "uart0", "pclk", PCLKCON, 0, 0, 0),
+};
+
+struct samsung_clock_alias s3c2443_common_aliases[] __initdata = {
+	ALIAS(HCLK, NULL, "hclk"),
+	ALIAS(HCLK_SSMC, NULL, "nand"),
+	ALIAS(PCLK_UART0, "s3c2440-uart.0", "uart"),
+	ALIAS(PCLK_UART1, "s3c2440-uart.1", "uart"),
+	ALIAS(PCLK_UART2, "s3c2440-uart.2", "uart"),
+	ALIAS(PCLK_UART3, "s3c2440-uart.3", "uart"),
+	ALIAS(PCLK_UART0, "s3c2440-uart.0", "clk_uart_baud2"),
+	ALIAS(PCLK_UART1, "s3c2440-uart.1", "clk_uart_baud2"),
+	ALIAS(PCLK_UART2, "s3c2440-uart.2", "clk_uart_baud2"),
+	ALIAS(PCLK_UART3, "s3c2440-uart.3", "clk_uart_baud2"),
+	ALIAS(SCLK_UART, NULL, "clk_uart_baud3"),
+	ALIAS(PCLK_PWM, NULL, "timers"),
+	ALIAS(PCLK_RTC, NULL, "rtc"),
+	ALIAS(PCLK_WDT, NULL, "watchdog"),
+	ALIAS(PCLK_ADC, NULL, "adc"),
+	ALIAS(PCLK_I2C0, "s3c2410-i2c.0", "i2c"),
+	ALIAS(HCLK_USBD, NULL, "usb-device"),
+	ALIAS(HCLK_USBH, NULL, "usb-host"),
+	ALIAS(SCLK_USBH, NULL, "usb-bus-host"),
+	ALIAS(PCLK_SPI0, "s3c2443-spi.0", "spi"),
+	ALIAS(PCLK_SPI0, "s3c2443-spi.0", "spi_busclk0"),
+	ALIAS(HCLK_HSMMC1, "s3c-sdhci.1", "hsmmc"),
+	ALIAS(HCLK_HSMMC1, "s3c-sdhci.1", "mmc_busclk.0"),
+	ALIAS(PCLK_I2S0, "samsung-i2s.0", "iis"),
+	ALIAS(SCLK_I2S0, NULL, "i2s-if"),
+	ALIAS(HCLK_LCD, NULL, "lcd"),
+	ALIAS(SCLK_FIMD, NULL, "sclk_fimd"),
+};
+
+/* S3C2416 specific clocks */
+
+static struct samsung_pll_clock s3c2416_pll_clks[] __initdata = {
+	[mpll] = PLL(pll_6552_s3c2416, 0, "mpll", "mpllref",
+						LOCKCON0, MPLLCON, NULL),
+	[epll] = PLL(pll_6553, 0, "epll", "epllref",
+						LOCKCON1, EPLLCON, NULL),
+};
+
+PNAME(s3c2416_hsmmc0_p) = { "sclk_hsmmc0", "sclk_hsmmcext" };
+PNAME(s3c2416_hsmmc1_p) = { "sclk_hsmmc1", "sclk_hsmmcext" };
+PNAME(s3c2416_hsspi0_p) = { "hsspi0_epll", "hsspi0_mpll" };
+
+static struct clk_div_table armdiv_s3c2416_d[] = {
+	{ .val = 0, .div = 1 },
+	{ .val = 1, .div = 2 },
+	{ .val = 2, .div = 3 },
+	{ .val = 3, .div = 4 },
+	{ .val = 5, .div = 6 },
+	{ .val = 7, .div = 8 },
+	{ /* sentinel */ },
+};
+
+struct samsung_div_clock s3c2416_dividers[] __initdata = {
+	DIV_T(ARMDIV, "armdiv", "msysclk", CLKDIV0, 9, 3, armdiv_s3c2416_d),
+	DIV(0, "div_hsspi0_mpll", "msysclk", CLKDIV2, 0, 4),
+	DIV(0, "div_hsmmc0", "esysclk", CLKDIV2, 6, 2),
+};
+
+struct samsung_mux_clock s3c2416_muxes[] __initdata = {
+	MUX(MUX_HSMMC0, "mux_hsmmc0", s3c2416_hsmmc0_p, CLKSRC, 16, 1),
+	MUX(MUX_HSMMC1, "mux_hsmmc1", s3c2416_hsmmc1_p, CLKSRC, 17, 1),
+	MUX(MUX_HSSPI0, "mux_hsspi0", s3c2416_hsspi0_p, CLKSRC, 18, 1),
+};
+
+struct samsung_gate_clock s3c2416_gates[] __initdata = {
+	GATE(0, "hsspi0_mpll", "div_hsspi0_mpll", SCLKCON, 19, 0, 0),
+	GATE(0, "hsspi0_epll", "div_hsspi0_epll", SCLKCON, 14, 0, 0),
+	GATE(0, "sclk_hsmmc0", "div_hsmmc0", SCLKCON, 6, 0, 0),
+	GATE(HCLK_2D, "2d", "hclk", HCLKCON, 20, 0, 0),
+	GATE(HCLK_HSMMC0, "hsmmc0", "hclk", HCLKCON, 15, 0, 0),
+	GATE(HCLK_IROM, "irom", "hclk", HCLKCON, 13, CLK_IGNORE_UNUSED, 0),
+	GATE(PCLK_PCM, "pcm", "pclk", PCLKCON, 19, 0, 0),
+};
+
+struct samsung_clock_alias s3c2416_aliases[] __initdata = {
+	ALIAS(HCLK_HSMMC0, "s3c-sdhci.0", "hsmmc"),
+	ALIAS(HCLK_HSMMC0, "s3c-sdhci.0", "mmc_busclk.0"),
+	ALIAS(MUX_HSMMC0, "s3c-sdhci.0", "mmc_busclk.2"),
+	ALIAS(MUX_HSMMC1, "s3c-sdhci.1", "mmc_busclk.2"),
+	ALIAS(MUX_HSSPI0, "s3c2443-spi.0", "spi_busclk2"),
+	ALIAS(ARMDIV, NULL, "armdiv"),
+};
+
+/* S3C2443 specific clocks */
+
+static struct samsung_pll_clock s3c2443_pll_clks[] __initdata = {
+	[mpll] = PLL(pll_3000, 0, "mpll", "mpllref",
+						LOCKCON0, MPLLCON, NULL),
+	[epll] = PLL(pll_2126, 0, "epll", "epllref",
+						LOCKCON1, EPLLCON, NULL),
+};
+
+static struct clk_div_table armdiv_s3c2443_d[] = {
+	{ .val = 0, .div = 1 },
+	{ .val = 8, .div = 2 },
+	{ .val = 2, .div = 3 },
+	{ .val = 9, .div = 4 },
+	{ .val = 10, .div = 6 },
+	{ .val = 11, .div = 8 },
+	{ .val = 13, .div = 12 },
+	{ .val = 15, .div = 16 },
+	{ /* sentinel */ },
+};
+
+struct samsung_div_clock s3c2443_dividers[] __initdata = {
+	DIV_T(ARMDIV, "armdiv", "msysclk", CLKDIV0, 9, 4, armdiv_s3c2443_d),
+	DIV(0, "div_cam", "esysclk", CLKDIV1, 26, 4),
+};
+
+struct samsung_gate_clock s3c2443_gates[] __initdata = {
+	GATE(SCLK_HSSPI0, "sclk_hsspi0", "div_hsspi0_epll", SCLKCON, 14, 0, 0),
+	GATE(SCLK_CAM, "sclk_cam", "div_cam", SCLKCON, 11, 0, 0),
+	GATE(HCLK_CFC, "cfc", "hclk", HCLKCON, 17, CLK_IGNORE_UNUSED, 0),
+	GATE(HCLK_CAM, "cam", "hclk", HCLKCON, 8, 0, 0),
+	GATE(PCLK_SPI1, "spi1", "pclk", PCLKCON, 15, 0, 0),
+	GATE(PCLK_SDI, "sdi", "pclk", PCLKCON, 5, 0, 0),
+};
+
+struct samsung_clock_alias s3c2443_aliases[] __initdata = {
+	ALIAS(SCLK_HSSPI0, "s3c2443-spi.0", "spi_busclk2"),
+	ALIAS(SCLK_HSMMC1, "s3c-sdhci.1", "mmc_busclk.2"),
+	ALIAS(SCLK_CAM, NULL, "camif-upll"),
+	ALIAS(PCLK_SPI1, "s3c2410-spi.0", "spi"),
+	ALIAS(PCLK_SDI, NULL, "sdi"),
+	ALIAS(HCLK_CFC, NULL, "cfc"),
+	ALIAS(ARMDIV, NULL, "armdiv"),
+};
+
+/* S3C2450 specific clocks */
+
+PNAME(s3c2450_cam_p) = { "div_cam", "hclk" };
+PNAME(s3c2450_hsspi1_p) = { "hsspi1_epll", "hsspi1_mpll" };
+PNAME(i2s1_p) = { "div_i2s1", "ext_i2s", "epllref", "epllref" };
+
+struct samsung_div_clock s3c2450_dividers[] __initdata = {
+	DIV(0, "div_cam", "esysclk", CLKDIV1, 26, 4),
+	DIV(0, "div_hsspi1_epll", "esysclk", CLKDIV2, 24, 2),
+	DIV(0, "div_hsspi1_mpll", "msysclk", CLKDIV2, 16, 4),
+	DIV(0, "div_i2s1", "esysclk", CLKDIV2, 12, 4),
+};
+
+struct samsung_mux_clock s3c2450_muxes[] __initdata = {
+	MUX(0, "mux_cam", s3c2450_cam_p, CLKSRC, 20, 1),
+	MUX(MUX_HSSPI1, "mux_hsspi1", s3c2450_hsspi1_p, CLKSRC, 19, 1),
+	MUX(0, "mux_i2s1", i2s1_p, CLKSRC, 12, 2),
+};
+
+struct samsung_gate_clock s3c2450_gates[] __initdata = {
+	GATE(SCLK_I2S1, "sclk_i2s1", "div_i2s1", SCLKCON, 5, 0, 0),
+	GATE(HCLK_CFC, "cfc", "hclk", HCLKCON, 17, 0, 0),
+	GATE(HCLK_CAM, "cam", "hclk", HCLKCON, 8, 0, 0),
+	GATE(HCLK_DMA7, "dma7", "hclk", HCLKCON, 7, CLK_IGNORE_UNUSED, 0),
+	GATE(HCLK_DMA6, "dma6", "hclk", HCLKCON, 6, CLK_IGNORE_UNUSED, 0),
+	GATE(PCLK_I2S1, "i2s1", "pclk", PCLKCON, 17, 0, 0),
+	GATE(PCLK_I2C1, "i2c1", "pclk", PCLKCON, 16, 0, 0),
+	GATE(PCLK_SPI1, "spi1", "pclk", PCLKCON, 14, 0, 0),
+};
+
+struct samsung_clock_alias s3c2450_aliases[] __initdata = {
+	ALIAS(PCLK_SPI1, "s3c2443-spi.1", "spi"),
+	ALIAS(PCLK_SPI1, "s3c2443-spi.1", "spi_busclk0"),
+	ALIAS(MUX_HSSPI1, "s3c2443-spi.1", "spi_busclk2"),
+	ALIAS(PCLK_I2C1, "s3c2410-i2c.1", "i2c"),
+};
+
+/*
+ * fixed rate clocks generated outside the soc
+ * Only necessary until the devicetree-move is complete
+ */
+struct samsung_fixed_rate_clock s3c2443_common_frate_clks[] __initdata = {
+	FRATE(0, "xti", NULL, CLK_IS_ROOT, 0),
+	FRATE(0, "ext", NULL, CLK_IS_ROOT, 0),
+	FRATE(0, "ext_i2s", NULL, CLK_IS_ROOT, 0),
+	FRATE(0, "ext_uart", NULL, CLK_IS_ROOT, 0),
+};
+
+static void __init s3c2443_common_clk_register_fixed_ext(
+		struct samsung_clk_provider *ctx, unsigned long xti_f)
+{
+	s3c2443_common_frate_clks[0].fixed_rate = xti_f;
+	samsung_clk_register_fixed_rate(ctx, s3c2443_common_frate_clks,
+				ARRAY_SIZE(s3c2443_common_frate_clks));
+}
+
+void __init s3c2443_common_clk_init(struct device_node *np, unsigned long xti_f,
+				    int current_soc,
+				    void __iomem *base)
+{
+	struct samsung_clk_provider *ctx;
+	reg_base = base;
+
+	if (np) {
+		reg_base = of_iomap(np, 0);
+		if (!reg_base)
+			panic("%s: failed to map registers\n", __func__);
+	}
+
+	ctx = samsung_clk_init(np, reg_base, NR_CLKS);
+	if (!ctx)
+		panic("%s: unable to allocate context.\n", __func__);
+
+	/* Register external clocks only in non-dt cases */
+	if (!np)
+		s3c2443_common_clk_register_fixed_ext(ctx, xti_f);
+
+	/* Register PLLs. */
+	if (current_soc == S3C2416 || current_soc == S3C2450)
+		samsung_clk_register_pll(ctx, s3c2416_pll_clks,
+				ARRAY_SIZE(s3c2416_pll_clks), reg_base);
+	else
+		samsung_clk_register_pll(ctx, s3c2443_pll_clks,
+				ARRAY_SIZE(s3c2443_pll_clks), reg_base);
+
+	/* Register common internal clocks. */
+	samsung_clk_register_mux(ctx, s3c2443_common_muxes,
+			ARRAY_SIZE(s3c2443_common_muxes));
+	samsung_clk_register_div(ctx, s3c2443_common_dividers,
+			ARRAY_SIZE(s3c2443_common_dividers));
+	samsung_clk_register_gate(ctx, s3c2443_common_gates,
+		ARRAY_SIZE(s3c2443_common_gates));
+	samsung_clk_register_alias(ctx, s3c2443_common_aliases,
+		ARRAY_SIZE(s3c2443_common_aliases));
+
+	/* Register SoC-specific clocks. */
+	switch (current_soc) {
+	case S3C2450:
+		samsung_clk_register_div(ctx, s3c2450_dividers,
+				ARRAY_SIZE(s3c2450_dividers));
+		samsung_clk_register_mux(ctx, s3c2450_muxes,
+				ARRAY_SIZE(s3c2450_muxes));
+		samsung_clk_register_gate(ctx, s3c2450_gates,
+				ARRAY_SIZE(s3c2450_gates));
+		samsung_clk_register_alias(ctx, s3c2450_aliases,
+				ARRAY_SIZE(s3c2450_aliases));
+		/* fall through, as s3c2450 extends the s3c2416 clocks */
+	case S3C2416:
+		samsung_clk_register_div(ctx, s3c2416_dividers,
+				ARRAY_SIZE(s3c2416_dividers));
+		samsung_clk_register_mux(ctx, s3c2416_muxes,
+				ARRAY_SIZE(s3c2416_muxes));
+		samsung_clk_register_gate(ctx, s3c2416_gates,
+				ARRAY_SIZE(s3c2416_gates));
+		samsung_clk_register_alias(ctx, s3c2416_aliases,
+				ARRAY_SIZE(s3c2416_aliases));
+		break;
+	case S3C2443:
+		samsung_clk_register_div(ctx, s3c2443_dividers,
+				ARRAY_SIZE(s3c2443_dividers));
+		samsung_clk_register_gate(ctx, s3c2443_gates,
+				ARRAY_SIZE(s3c2443_gates));
+		samsung_clk_register_alias(ctx, s3c2443_aliases,
+				ARRAY_SIZE(s3c2443_aliases));
+		break;
+	}
+
+	s3c2443_clk_sleep_init();
+}
+
+static void __init s3c2416_clk_init(struct device_node *np)
+{
+	s3c2443_common_clk_init(np, 0, S3C2416, 0);
+}
+CLK_OF_DECLARE(s3c2416_clk, "samsung,s3c2416-clock", s3c2416_clk_init);
+
+static void __init s3c2443_clk_init(struct device_node *np)
+{
+	s3c2443_common_clk_init(np, 0, S3C2443, 0);
+}
+CLK_OF_DECLARE(s3c2443_clk, "samsung,s3c2443-clock", s3c2443_clk_init);
+
+static void __init s3c2450_clk_init(struct device_node *np)
+{
+	s3c2443_common_clk_init(np, 0, S3C2450, 0);
+}
+CLK_OF_DECLARE(s3c2450_clk, "samsung,s3c2450-clock", s3c2450_clk_init);

drivers/clk/samsung/clk-s3c64xx.c

@@ -442,12 +442,14 @@ static struct samsung_clock_alias s3c6410_clock_aliases[] = {
 	ALIAS(MEM0_SROM, NULL, "srom"),
 };
 
-static void __init s3c64xx_clk_register_fixed_ext(unsigned long fin_pll_f,
-							unsigned long xusbxti_f)
+static void __init s3c64xx_clk_register_fixed_ext(
+				struct samsung_clk_provider *ctx,
+				unsigned long fin_pll_f,
+				unsigned long xusbxti_f)
 {
 	s3c64xx_fixed_rate_ext_clks[0].fixed_rate = fin_pll_f;
 	s3c64xx_fixed_rate_ext_clks[1].fixed_rate = xusbxti_f;
-	samsung_clk_register_fixed_rate(s3c64xx_fixed_rate_ext_clks,
+	samsung_clk_register_fixed_rate(ctx, s3c64xx_fixed_rate_ext_clks,
 				ARRAY_SIZE(s3c64xx_fixed_rate_ext_clks));
 }
 
@@ -456,6 +458,8 @@ void __init s3c64xx_clk_init(struct device_node *np, unsigned long xtal_f,
 			     unsigned long xusbxti_f, bool s3c6400,
 			     void __iomem *base)
 {
+	struct samsung_clk_provider *ctx;
+
 	reg_base = base;
 	is_s3c6400 = s3c6400;
 
@@ -465,48 +469,50 @@ void __init s3c64xx_clk_init(struct device_node *np, unsigned long xtal_f,
 			panic("%s: failed to map registers\n", __func__);
 	}
 
-	samsung_clk_init(np, reg_base, NR_CLKS);
+	ctx = samsung_clk_init(np, reg_base, NR_CLKS);
+	if (!ctx)
+		panic("%s: unable to allocate context.\n", __func__);
 
 	/* Register external clocks. */
 	if (!np)
-		s3c64xx_clk_register_fixed_ext(xtal_f, xusbxti_f);
+		s3c64xx_clk_register_fixed_ext(ctx, xtal_f, xusbxti_f);
 
 	/* Register PLLs. */
-	samsung_clk_register_pll(s3c64xx_pll_clks,
+	samsung_clk_register_pll(ctx, s3c64xx_pll_clks,
 				ARRAY_SIZE(s3c64xx_pll_clks), reg_base);
 
 	/* Register common internal clocks. */
-	samsung_clk_register_fixed_rate(s3c64xx_fixed_rate_clks,
+	samsung_clk_register_fixed_rate(ctx, s3c64xx_fixed_rate_clks,
 					ARRAY_SIZE(s3c64xx_fixed_rate_clks));
-	samsung_clk_register_mux(s3c64xx_mux_clks,
+	samsung_clk_register_mux(ctx, s3c64xx_mux_clks,
 					ARRAY_SIZE(s3c64xx_mux_clks));
-	samsung_clk_register_div(s3c64xx_div_clks,
+	samsung_clk_register_div(ctx, s3c64xx_div_clks,
 					ARRAY_SIZE(s3c64xx_div_clks));
-	samsung_clk_register_gate(s3c64xx_gate_clks,
+	samsung_clk_register_gate(ctx, s3c64xx_gate_clks,
 					ARRAY_SIZE(s3c64xx_gate_clks));
 
 	/* Register SoC-specific clocks. */
 	if (is_s3c6400) {
-		samsung_clk_register_mux(s3c6400_mux_clks,
+		samsung_clk_register_mux(ctx, s3c6400_mux_clks,
 					ARRAY_SIZE(s3c6400_mux_clks));
-		samsung_clk_register_div(s3c6400_div_clks,
+		samsung_clk_register_div(ctx, s3c6400_div_clks,
 					ARRAY_SIZE(s3c6400_div_clks));
-		samsung_clk_register_gate(s3c6400_gate_clks,
+		samsung_clk_register_gate(ctx, s3c6400_gate_clks,
 					ARRAY_SIZE(s3c6400_gate_clks));
-		samsung_clk_register_alias(s3c6400_clock_aliases,
+		samsung_clk_register_alias(ctx, s3c6400_clock_aliases,
 					ARRAY_SIZE(s3c6400_clock_aliases));
 	} else {
-		samsung_clk_register_mux(s3c6410_mux_clks,
+		samsung_clk_register_mux(ctx, s3c6410_mux_clks,
 					ARRAY_SIZE(s3c6410_mux_clks));
-		samsung_clk_register_div(s3c6410_div_clks,
+		samsung_clk_register_div(ctx, s3c6410_div_clks,
 					ARRAY_SIZE(s3c6410_div_clks));
-		samsung_clk_register_gate(s3c6410_gate_clks,
+		samsung_clk_register_gate(ctx, s3c6410_gate_clks,
 					ARRAY_SIZE(s3c6410_gate_clks));
-		samsung_clk_register_alias(s3c6410_clock_aliases,
+		samsung_clk_register_alias(ctx, s3c6410_clock_aliases,
 					ARRAY_SIZE(s3c6410_clock_aliases));
 	}
 
-	samsung_clk_register_alias(s3c64xx_clock_aliases,
+	samsung_clk_register_alias(ctx, s3c64xx_clock_aliases,
 					ARRAY_SIZE(s3c64xx_clock_aliases));
 	s3c64xx_clk_sleep_init();
 

drivers/clk/samsung/clk.c

@@ -14,13 +14,6 @@
 #include <linux/syscore_ops.h>
 #include "clk.h"
 
-static DEFINE_SPINLOCK(lock);
-static struct clk **clk_table;
-static void __iomem *reg_base;
-#ifdef CONFIG_OF
-static struct clk_onecell_data clk_data;
-#endif
-
 void samsung_clk_save(void __iomem *base,
 				    struct samsung_clk_reg_dump *rd,
 				    unsigned int num_regs)
@@ -55,40 +48,58 @@ struct samsung_clk_reg_dump *samsung_clk_alloc_reg_dump(
 }
 
 /* setup the essentials required to support clock lookup using ccf */
-void __init samsung_clk_init(struct device_node *np, void __iomem *base,
-			     unsigned long nr_clks)
+struct samsung_clk_provider *__init samsung_clk_init(struct device_node *np,
+			void __iomem *base, unsigned long nr_clks)
 {
-	reg_base = base;
+	struct samsung_clk_provider *ctx;
+	struct clk **clk_table;
+	int ret;
+	int i;
 
-	clk_table = kzalloc(sizeof(struct clk *) * nr_clks, GFP_KERNEL);
+	ctx = kzalloc(sizeof(struct samsung_clk_provider), GFP_KERNEL);
+	if (!ctx)
+		panic("could not allocate clock provider context.\n");
+
+	clk_table = kcalloc(nr_clks, sizeof(struct clk *), GFP_KERNEL);
 	if (!clk_table)
 		panic("could not allocate clock lookup table\n");
 
+	for (i = 0; i < nr_clks; ++i)
+		clk_table[i] = ERR_PTR(-ENOENT);
+
+	ctx->reg_base = base;
+	ctx->clk_data.clks = clk_table;
+	ctx->clk_data.clk_num = nr_clks;
+	spin_lock_init(&ctx->lock);
+
 	if (!np)
-		return;
+		return ctx;
 
-#ifdef CONFIG_OF
-	clk_data.clks = clk_table;
-	clk_data.clk_num = nr_clks;
-	of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
-#endif
+	ret = of_clk_add_provider(np, of_clk_src_onecell_get,
+			&ctx->clk_data);
+	if (ret)
+		panic("could not register clock provide\n");
+
+	return ctx;
 }
 
 /* add a clock instance to the clock lookup table used for dt based lookup */
-void samsung_clk_add_lookup(struct clk *clk, unsigned int id)
+void samsung_clk_add_lookup(struct samsung_clk_provider *ctx, struct clk *clk,
+				unsigned int id)
 {
-	if (clk_table && id)
-		clk_table[id] = clk;
+	if (ctx->clk_data.clks && id)
+		ctx->clk_data.clks[id] = clk;
 }
 
 /* register a list of aliases */
-void __init samsung_clk_register_alias(struct samsung_clock_alias *list,
-					unsigned int nr_clk)
+void __init samsung_clk_register_alias(struct samsung_clk_provider *ctx,
+				struct samsung_clock_alias *list,
+				unsigned int nr_clk)
 {
 	struct clk *clk;
 	unsigned int idx, ret;
 
-	if (!clk_table) {
+	if (!ctx->clk_data.clks) {
 		pr_err("%s: clock table missing\n", __func__);
 		return;
 	}
@@ -100,7 +111,7 @@ void __init samsung_clk_register_alias(struct samsung_clock_alias *list,
 			continue;
 		}
 
-		clk = clk_table[list->id];
+		clk = ctx->clk_data.clks[list->id];
 		if (!clk) {
 			pr_err("%s: failed to find clock %d\n", __func__,
 				list->id);
@@ -115,7 +126,7 @@ void __init samsung_clk_register_alias(struct samsung_clock_alias *list,
 }
 
 /* register a list of fixed clocks */
-void __init samsung_clk_register_fixed_rate(
+void __init samsung_clk_register_fixed_rate(struct samsung_clk_provider *ctx,
 		struct samsung_fixed_rate_clock *list, unsigned int nr_clk)
 {
 	struct clk *clk;
@@ -130,7 +141,7 @@ void __init samsung_clk_register_fixed_rate(
 			continue;
 		}
 
-		samsung_clk_add_lookup(clk, list->id);
+		samsung_clk_add_lookup(ctx, clk, list->id);
 
 		/*
 		 * Unconditionally add a clock lookup for the fixed rate clocks.
@@ -144,7 +155,7 @@ void __init samsung_clk_register_fixed_rate(
 }
 
 /* register a list of fixed factor clocks */
-void __init samsung_clk_register_fixed_factor(
+void __init samsung_clk_register_fixed_factor(struct samsung_clk_provider *ctx,
 		struct samsung_fixed_factor_clock *list, unsigned int nr_clk)
 {
 	struct clk *clk;
@@ -159,28 +170,30 @@ void __init samsung_clk_register_fixed_factor(
 			continue;
 		}
 
-		samsung_clk_add_lookup(clk, list->id);
+		samsung_clk_add_lookup(ctx, clk, list->id);
 	}
 }
 
 /* register a list of mux clocks */
-void __init samsung_clk_register_mux(struct samsung_mux_clock *list,
-					unsigned int nr_clk)
+void __init samsung_clk_register_mux(struct samsung_clk_provider *ctx,
+				struct samsung_mux_clock *list,
+				unsigned int nr_clk)
 {
 	struct clk *clk;
 	unsigned int idx, ret;
 
 	for (idx = 0; idx < nr_clk; idx++, list++) {
 		clk = clk_register_mux(NULL, list->name, list->parent_names,
-			list->num_parents, list->flags, reg_base + list->offset,
-			list->shift, list->width, list->mux_flags, &lock);
+			list->num_parents, list->flags,
+			ctx->reg_base + list->offset,
+			list->shift, list->width, list->mux_flags, &ctx->lock);
 		if (IS_ERR(clk)) {
 			pr_err("%s: failed to register clock %s\n", __func__,
 				list->name);
 			continue;
 		}
 
-		samsung_clk_add_lookup(clk, list->id);
+		samsung_clk_add_lookup(ctx, clk, list->id);
 
 		/* register a clock lookup only if a clock alias is specified */
 		if (list->alias) {
@@ -194,8 +207,9 @@ void __init samsung_clk_register_mux(struct samsung_mux_clock *list,
 }
 
 /* register a list of div clocks */
-void __init samsung_clk_register_div(struct samsung_div_clock *list,
-					unsigned int nr_clk)
+void __init samsung_clk_register_div(struct samsung_clk_provider *ctx,
+				struct samsung_div_clock *list,
+				unsigned int nr_clk)
 {
 	struct clk *clk;
 	unsigned int idx, ret;
@@ -203,22 +217,22 @@ void __init samsung_clk_register_div(struct samsung_div_clock *list,
 	for (idx = 0; idx < nr_clk; idx++, list++) {
 		if (list->table)
 			clk = clk_register_divider_table(NULL, list->name,
-					list->parent_name, list->flags,
-					reg_base + list->offset, list->shift,
-					list->width, list->div_flags,
-					list->table, &lock);
+				list->parent_name, list->flags,
+				ctx->reg_base + list->offset,
+				list->shift, list->width, list->div_flags,
+				list->table, &ctx->lock);
 		else
 			clk = clk_register_divider(NULL, list->name,
-					list->parent_name, list->flags,
-					reg_base + list->offset, list->shift,
-					list->width, list->div_flags, &lock);
+				list->parent_name, list->flags,
+				ctx->reg_base + list->offset, list->shift,
+				list->width, list->div_flags, &ctx->lock);
 		if (IS_ERR(clk)) {
 			pr_err("%s: failed to register clock %s\n", __func__,
 				list->name);
 			continue;
 		}
 
-		samsung_clk_add_lookup(clk, list->id);
+		samsung_clk_add_lookup(ctx, clk, list->id);
 
 		/* register a clock lookup only if a clock alias is specified */
 		if (list->alias) {
@@ -232,16 +246,17 @@ void __init samsung_clk_register_div(struct samsung_div_clock *list,
 }
 
 /* register a list of gate clocks */
-void __init samsung_clk_register_gate(struct samsung_gate_clock *list,
-						unsigned int nr_clk)
+void __init samsung_clk_register_gate(struct samsung_clk_provider *ctx,
+				struct samsung_gate_clock *list,
+				unsigned int nr_clk)
 {
 	struct clk *clk;
 	unsigned int idx, ret;
 
 	for (idx = 0; idx < nr_clk; idx++, list++) {
 		clk = clk_register_gate(NULL, list->name, list->parent_name,
-				list->flags, reg_base + list->offset,
-				list->bit_idx, list->gate_flags, &lock);
+				list->flags, ctx->reg_base + list->offset,
+				list->bit_idx, list->gate_flags, &ctx->lock);
 		if (IS_ERR(clk)) {
 			pr_err("%s: failed to register clock %s\n", __func__,
 				list->name);
@@ -257,7 +272,7 @@ void __init samsung_clk_register_gate(struct samsung_gate_clock *list,
 					__func__, list->alias);
 		}
 
-		samsung_clk_add_lookup(clk, list->id);
+		samsung_clk_add_lookup(ctx, clk, list->id);
 	}
 }
 
@@ -266,21 +281,21 @@ void __init samsung_clk_register_gate(struct samsung_gate_clock *list,
  * tree and register it
  */
 #ifdef CONFIG_OF
-void __init samsung_clk_of_register_fixed_ext(
+void __init samsung_clk_of_register_fixed_ext(struct samsung_clk_provider *ctx,
 			struct samsung_fixed_rate_clock *fixed_rate_clk,
 			unsigned int nr_fixed_rate_clk,
 			struct of_device_id *clk_matches)
 {
 	const struct of_device_id *match;
-	struct device_node *np;
+	struct device_node *clk_np;
 	u32 freq;
 
-	for_each_matching_node_and_match(np, clk_matches, &match) {
-		if (of_property_read_u32(np, "clock-frequency", &freq))
+	for_each_matching_node_and_match(clk_np, clk_matches, &match) {
+		if (of_property_read_u32(clk_np, "clock-frequency", &freq))
 			continue;
-		fixed_rate_clk[(u32)match->data].fixed_rate = freq;
+		fixed_rate_clk[(unsigned long)match->data].fixed_rate = freq;
 	}
-	samsung_clk_register_fixed_rate(fixed_rate_clk, nr_fixed_rate_clk);
+	samsung_clk_register_fixed_rate(ctx, fixed_rate_clk, nr_fixed_rate_clk);
 }
 #endif
 

drivers/clk/samsung/clk.h

@@ -21,6 +21,18 @@
 #include <linux/of_address.h>
 #include "clk-pll.h"
 
+/**
+ * struct samsung_clk_provider: information about clock provider
+ * @reg_base: virtual address for the register base.
+ * @clk_data: holds clock related data like clk* and number of clocks.
+ * @lock: maintains exclusion bwtween callbacks for a given clock-provider.
+ */
+struct samsung_clk_provider {
+	void __iomem *reg_base;
+	struct clk_onecell_data clk_data;
+	spinlock_t lock;
+};
+
 /**
  * struct samsung_clock_alias: information about mux clock
  * @id: platform specific id of the clock.
@@ -312,40 +324,52 @@ struct samsung_pll_clock {
 	__PLL(_typ, _id, NULL, _name, _pname, CLK_GET_RATE_NOCACHE,	\
 		_lock, _con, _rtable, _alias)
 
-extern void __init samsung_clk_init(struct device_node *np, void __iomem *base,
-				    unsigned long nr_clks);
+extern struct samsung_clk_provider *__init samsung_clk_init(
+			struct device_node *np, void __iomem *base,
+			unsigned long nr_clks);
 extern void __init samsung_clk_of_register_fixed_ext(
-		struct samsung_fixed_rate_clock *fixed_rate_clk,
-		unsigned int nr_fixed_rate_clk,
-		struct of_device_id *clk_matches);
+			struct samsung_clk_provider *ctx,
+			struct samsung_fixed_rate_clock *fixed_rate_clk,
+			unsigned int nr_fixed_rate_clk,
+			struct of_device_id *clk_matches);
 
-extern void samsung_clk_add_lookup(struct clk *clk, unsigned int id);
+extern void samsung_clk_add_lookup(struct samsung_clk_provider *ctx,
+			struct clk *clk, unsigned int id);
 
-extern void samsung_clk_register_alias(struct samsung_clock_alias *list,
-		unsigned int nr_clk);
+extern void samsung_clk_register_alias(struct samsung_clk_provider *ctx,
+			struct samsung_clock_alias *list,
+			unsigned int nr_clk);
 extern void __init samsung_clk_register_fixed_rate(
-		struct samsung_fixed_rate_clock *clk_list, unsigned int nr_clk);
+			struct samsung_clk_provider *ctx,
+			struct samsung_fixed_rate_clock *clk_list,
+			unsigned int nr_clk);
 extern void __init samsung_clk_register_fixed_factor(
-		struct samsung_fixed_factor_clock *list, unsigned int nr_clk);
-extern void __init samsung_clk_register_mux(struct samsung_mux_clock *clk_list,
-		unsigned int nr_clk);
-extern void __init samsung_clk_register_div(struct samsung_div_clock *clk_list,
-		unsigned int nr_clk);
-extern void __init samsung_clk_register_gate(
-		struct samsung_gate_clock *clk_list, unsigned int nr_clk);
-extern void __init samsung_clk_register_pll(struct samsung_pll_clock *pll_list,
-		unsigned int nr_clk, void __iomem *base);
+			struct samsung_clk_provider *ctx,
+			struct samsung_fixed_factor_clock *list,
+			unsigned int nr_clk);
+extern void __init samsung_clk_register_mux(struct samsung_clk_provider *ctx,
+			struct samsung_mux_clock *clk_list,
+			unsigned int nr_clk);
+extern void __init samsung_clk_register_div(struct samsung_clk_provider *ctx,
+			struct samsung_div_clock *clk_list,
+			unsigned int nr_clk);
+extern void __init samsung_clk_register_gate(struct samsung_clk_provider *ctx,
+			struct samsung_gate_clock *clk_list,
+			unsigned int nr_clk);
+extern void __init samsung_clk_register_pll(struct samsung_clk_provider *ctx,
+			struct samsung_pll_clock *pll_list,
+			unsigned int nr_clk, void __iomem *base);
 
 extern unsigned long _get_rate(const char *clk_name);
 
 extern void samsung_clk_save(void __iomem *base,
-			     struct samsung_clk_reg_dump *rd,
-			     unsigned int num_regs);
+			struct samsung_clk_reg_dump *rd,
+			unsigned int num_regs);
 extern void samsung_clk_restore(void __iomem *base,
-				const struct samsung_clk_reg_dump *rd,
-				unsigned int num_regs);
+			const struct samsung_clk_reg_dump *rd,
+			unsigned int num_regs);
 extern struct samsung_clk_reg_dump *samsung_clk_alloc_reg_dump(
-						const unsigned long *rdump,
-						unsigned long nr_rdump);
+			const unsigned long *rdump,
+			unsigned long nr_rdump);
 
 #endif /* __SAMSUNG_CLK_H */

drivers/cpufreq/s3c24xx-cpufreq.c

@@ -141,6 +141,7 @@ static int s3c_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
 
 static void s3c_cpufreq_setfvco(struct s3c_cpufreq_config *cfg)
 {
+	cfg->mpll = _clk_mpll;
 	(cfg->info->set_fvco)(cfg);
 }
 

include/dt-bindings/clock/exynos3250.h

@@ -0,0 +1,258 @@
+/*
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ * 	Author: Tomasz Figa <t.figa@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Device Tree binding constants for Samsung Exynos3250 clock controllers.
+ */
+
+#ifndef _DT_BINDINGS_CLOCK_SAMSUNG_EXYNOS3250_CLOCK_H
+#define _DT_BINDINGS_CLOCK_SAMSUNG_EXYNOS3250_CLOCK_H
+
+/*
+ * Let each exported clock get a unique index, which is used on DT-enabled
+ * platforms to lookup the clock from a clock specifier. These indices are
+ * therefore considered an ABI and so must not be changed. This implies
+ * that new clocks should be added either in free spaces between clock groups
+ * or at the end.
+ */
+
+
+/*
+ * Main CMU
+ */
+
+#define CLK_OSCSEL			1
+#define CLK_FIN_PLL			2
+#define CLK_FOUT_APLL			3
+#define CLK_FOUT_VPLL			4
+#define CLK_FOUT_UPLL			5
+#define CLK_FOUT_MPLL			6
+
+/* Muxes */
+#define CLK_MOUT_MPLL_USER_L		16
+#define CLK_MOUT_GDL			17
+#define CLK_MOUT_MPLL_USER_R		18
+#define CLK_MOUT_GDR			19
+#define CLK_MOUT_EBI			20
+#define CLK_MOUT_ACLK_200		21
+#define CLK_MOUT_ACLK_160		22
+#define CLK_MOUT_ACLK_100		23
+#define CLK_MOUT_ACLK_266_1		24
+#define CLK_MOUT_ACLK_266_0		25
+#define CLK_MOUT_ACLK_266		26
+#define CLK_MOUT_VPLL			27
+#define CLK_MOUT_EPLL_USER		28
+#define CLK_MOUT_EBI_1			29
+#define CLK_MOUT_UPLL			30
+#define CLK_MOUT_ACLK_400_MCUISP_SUB	31
+#define CLK_MOUT_MPLL			32
+#define CLK_MOUT_ACLK_400_MCUISP	33
+#define CLK_MOUT_VPLLSRC		34
+#define CLK_MOUT_CAM1			35
+#define CLK_MOUT_CAM_BLK		36
+#define CLK_MOUT_MFC			37
+#define CLK_MOUT_MFC_1			38
+#define CLK_MOUT_MFC_0			39
+#define CLK_MOUT_G3D			40
+#define CLK_MOUT_G3D_1			41
+#define CLK_MOUT_G3D_0			42
+#define CLK_MOUT_MIPI0			43
+#define CLK_MOUT_FIMD0			44
+#define CLK_MOUT_UART_ISP		45
+#define CLK_MOUT_SPI1_ISP		46
+#define CLK_MOUT_SPI0_ISP		47
+#define CLK_MOUT_TSADC			48
+#define CLK_MOUT_MMC1			49
+#define CLK_MOUT_MMC0			50
+#define CLK_MOUT_UART1			51
+#define CLK_MOUT_UART0			52
+#define CLK_MOUT_SPI1			53
+#define CLK_MOUT_SPI0			54
+#define CLK_MOUT_AUDIO			55
+#define CLK_MOUT_MPLL_USER_C		56
+#define CLK_MOUT_HPM			57
+#define CLK_MOUT_CORE			58
+#define CLK_MOUT_APLL			59
+#define CLK_MOUT_ACLK_266_SUB		60
+
+/* Dividers */
+#define CLK_DIV_GPL			64
+#define CLK_DIV_GDL			65
+#define CLK_DIV_GPR			66
+#define CLK_DIV_GDR			67
+#define CLK_DIV_MPLL_PRE		68
+#define CLK_DIV_ACLK_400_MCUISP		69
+#define CLK_DIV_EBI			70
+#define CLK_DIV_ACLK_200		71
+#define CLK_DIV_ACLK_160		72
+#define CLK_DIV_ACLK_100		73
+#define CLK_DIV_ACLK_266		74
+#define CLK_DIV_CAM1			75
+#define CLK_DIV_CAM_BLK			76
+#define CLK_DIV_MFC			77
+#define CLK_DIV_G3D			78
+#define CLK_DIV_MIPI0_PRE		79
+#define CLK_DIV_MIPI0			80
+#define CLK_DIV_FIMD0			81
+#define CLK_DIV_UART_ISP		82
+#define CLK_DIV_SPI1_ISP_PRE		83
+#define CLK_DIV_SPI1_ISP		84
+#define CLK_DIV_SPI0_ISP_PRE		85
+#define CLK_DIV_SPI0_ISP		86
+#define CLK_DIV_TSADC_PRE		87
+#define CLK_DIV_TSADC			88
+#define CLK_DIV_MMC1_PRE		89
+#define CLK_DIV_MMC1			90
+#define CLK_DIV_MMC0_PRE		91
+#define CLK_DIV_MMC0			92
+#define CLK_DIV_UART1			93
+#define CLK_DIV_UART0			94
+#define CLK_DIV_SPI1_PRE		95
+#define CLK_DIV_SPI1			96
+#define CLK_DIV_SPI0_PRE		97
+#define CLK_DIV_SPI0			98
+#define CLK_DIV_PCM			99
+#define CLK_DIV_AUDIO			100
+#define CLK_DIV_I2S			101
+#define CLK_DIV_CORE2			102
+#define CLK_DIV_APLL			103
+#define CLK_DIV_PCLK_DBG		104
+#define CLK_DIV_ATB			105
+#define CLK_DIV_COREM			106
+#define CLK_DIV_CORE			107
+#define CLK_DIV_HPM			108
+#define CLK_DIV_COPY			109
+
+/* Gates */
+#define CLK_ASYNC_G3D			128
+#define CLK_ASYNC_MFCL			129
+#define CLK_PPMULEFT			130
+#define CLK_GPIO_LEFT			131
+#define CLK_ASYNC_ISPMX			132
+#define CLK_ASYNC_FSYSD			133
+#define CLK_ASYNC_LCD0X			134
+#define CLK_ASYNC_CAMX			135
+#define CLK_PPMURIGHT			136
+#define CLK_GPIO_RIGHT			137
+#define CLK_MONOCNT			138
+#define CLK_TZPC6			139
+#define CLK_PROVISIONKEY1		140
+#define CLK_PROVISIONKEY0		141
+#define CLK_CMU_ISPPART			142
+#define CLK_TMU_APBIF			143
+#define CLK_KEYIF			144
+#define CLK_RTC				145
+#define CLK_WDT				146
+#define CLK_MCT				147
+#define CLK_SECKEY			148
+#define CLK_TZPC5			149
+#define CLK_TZPC4			150
+#define CLK_TZPC3			151
+#define CLK_TZPC2			152
+#define CLK_TZPC1			153
+#define CLK_TZPC0			154
+#define CLK_CMU_COREPART		155
+#define CLK_CMU_TOPPART			156
+#define CLK_PMU_APBIF			157
+#define CLK_SYSREG			158
+#define CLK_CHIP_ID			159
+#define CLK_QEJPEG			160
+#define CLK_PIXELASYNCM1		161
+#define CLK_PIXELASYNCM0		162
+#define CLK_PPMUCAMIF			163
+#define CLK_QEM2MSCALER			164
+#define CLK_QEGSCALER1			165
+#define CLK_QEGSCALER0			166
+#define CLK_SMMUJPEG			167
+#define CLK_SMMUM2M2SCALER		168
+#define CLK_SMMUGSCALER1		169
+#define CLK_SMMUGSCALER0		170
+#define CLK_JPEG			171
+#define CLK_M2MSCALER			172
+#define CLK_GSCALER1			173
+#define CLK_GSCALER0			174
+#define CLK_QEMFC			175
+#define CLK_PPMUMFC_L			176
+#define CLK_SMMUMFC_L			177
+#define CLK_MFC				178
+#define CLK_SMMUG3D			179
+#define CLK_QEG3D			180
+#define CLK_PPMUG3D			181
+#define CLK_G3D				182
+#define CLK_QE_CH1_LCD			183
+#define CLK_QE_CH0_LCD			184
+#define CLK_PPMULCD0			185
+#define CLK_SMMUFIMD0			186
+#define CLK_DSIM0			187
+#define CLK_FIMD0			188
+#define CLK_CAM1			189
+#define CLK_UART_ISP_TOP		190
+#define CLK_SPI1_ISP_TOP		191
+#define CLK_SPI0_ISP_TOP		192
+#define CLK_TSADC			193
+#define CLK_PPMUFILE			194
+#define CLK_USBOTG			195
+#define CLK_USBHOST			196
+#define CLK_SROMC			197
+#define CLK_SDMMC1			198
+#define CLK_SDMMC0			199
+#define CLK_PDMA1			200
+#define CLK_PDMA0			201
+#define CLK_PWM				202
+#define CLK_PCM				203
+#define CLK_I2S				204
+#define CLK_SPI1			205
+#define CLK_SPI0			206
+#define CLK_I2C7			207
+#define CLK_I2C6			208
+#define CLK_I2C5			209
+#define CLK_I2C4			210
+#define CLK_I2C3			211
+#define CLK_I2C2			212
+#define CLK_I2C1			213
+#define CLK_I2C0			214
+#define CLK_UART1			215
+#define CLK_UART0			216
+#define CLK_BLOCK_LCD			217
+#define CLK_BLOCK_G3D			218
+#define CLK_BLOCK_MFC			219
+#define CLK_BLOCK_CAM			220
+#define CLK_SMIES			221
+
+/* Special clocks */
+#define CLK_SCLK_JPEG			224
+#define CLK_SCLK_M2MSCALER		225
+#define CLK_SCLK_GSCALER1		226
+#define CLK_SCLK_GSCALER0		227
+#define CLK_SCLK_MFC			228
+#define CLK_SCLK_G3D			229
+#define CLK_SCLK_MIPIDPHY2L		230
+#define CLK_SCLK_MIPI0			231
+#define CLK_SCLK_FIMD0			232
+#define CLK_SCLK_CAM1			233
+#define CLK_SCLK_UART_ISP		234
+#define CLK_SCLK_SPI1_ISP		235
+#define CLK_SCLK_SPI0_ISP		236
+#define CLK_SCLK_UPLL			237
+#define CLK_SCLK_TSADC			238
+#define CLK_SCLK_EBI			239
+#define CLK_SCLK_MMC1			240
+#define CLK_SCLK_MMC0			241
+#define CLK_SCLK_I2S			242
+#define CLK_SCLK_PCM			243
+#define CLK_SCLK_SPI1			244
+#define CLK_SCLK_SPI0			245
+#define CLK_SCLK_UART1			246
+#define CLK_SCLK_UART0			247
+
+/*
+ * Total number of clocks of main CMU.
+ * NOTE: Must be equal to last clock ID increased by one.
+ */
+#define CLK_NR_CLKS			248
+
+#endif /* _DT_BINDINGS_CLOCK_SAMSUNG_EXYNOS3250_CLOCK_H */

include/dt-bindings/clock/exynos4.h

@@ -33,6 +33,7 @@
 #define CLK_MOUT_MPLL_USER_C	18 /* Exynos4x12 only */
 #define CLK_MOUT_CORE		19
 #define CLK_MOUT_APLL		20
+#define CLK_SCLK_HDMIPHY	22
 
 /* gate for special clocks (sclk) */
 #define CLK_SCLK_FIMC0		128
@@ -181,7 +182,6 @@
 #define CLK_KEYIF		347
 #define CLK_AUDSS		348
 #define CLK_MIPI_HSI		349 /* Exynos4210 only */
-#define CLK_MDMA2		350 /* Exynos4210 only */
 #define CLK_PIXELASYNCM0	351
 #define CLK_PIXELASYNCM1	352
 #define CLK_FIMC_LITE0		353 /* Exynos4x12 only */

include/dt-bindings/clock/exynos5250.h

@@ -150,11 +150,14 @@
 #define CLK_G2D			345
 #define CLK_MDMA0		346
 #define CLK_SMMU_MDMA0		347
+#define CLK_SSS			348
+#define CLK_G3D			349
 
 /* mux clocks */
 #define CLK_MOUT_HDMI		1024
+#define CLK_MOUT_GPLL		1025
 
 /* must be greater than maximal clock id */
-#define CLK_NR_CLKS		1025
+#define CLK_NR_CLKS		1026
 
 #endif /* _DT_BINDINGS_CLOCK_EXYNOS_5250_H */

include/dt-bindings/clock/exynos5260-clk.h

@@ -0,0 +1,469 @@
+/*
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ * Author: Rahul Sharma <rahul.sharma@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Provides Constants for Exynos5260 clocks.
+*/
+
+#ifndef _DT_BINDINGS_CLK_EXYNOS5260_H
+#define _DT_BINDINGS_CLK_EXYNOS5260_H
+
+/* Clock names: <cmu><type><IP> */
+
+/* List Of Clocks For CMU_TOP */
+
+#define TOP_FOUT_DISP_PLL				1
+#define TOP_FOUT_AUD_PLL				2
+#define TOP_MOUT_AUDTOP_PLL_USER			3
+#define TOP_MOUT_AUD_PLL				4
+#define TOP_MOUT_DISP_PLL				5
+#define TOP_MOUT_BUSTOP_PLL_USER			6
+#define TOP_MOUT_MEMTOP_PLL_USER			7
+#define TOP_MOUT_MEDIATOP_PLL_USER			8
+#define TOP_MOUT_DISP_DISP_333				9
+#define TOP_MOUT_ACLK_DISP_333				10
+#define TOP_MOUT_DISP_DISP_222				11
+#define TOP_MOUT_ACLK_DISP_222				12
+#define TOP_MOUT_DISP_MEDIA_PIXEL			13
+#define TOP_MOUT_FIMD1					14
+#define TOP_MOUT_SCLK_PERI_SPI0_CLK			15
+#define TOP_MOUT_SCLK_PERI_SPI1_CLK			16
+#define TOP_MOUT_SCLK_PERI_SPI2_CLK			17
+#define TOP_MOUT_SCLK_PERI_UART0_UCLK			18
+#define TOP_MOUT_SCLK_PERI_UART2_UCLK			19
+#define TOP_MOUT_SCLK_PERI_UART1_UCLK			20
+#define TOP_MOUT_BUS4_BUSTOP_100			21
+#define TOP_MOUT_BUS4_BUSTOP_400			22
+#define TOP_MOUT_BUS3_BUSTOP_100			23
+#define TOP_MOUT_BUS3_BUSTOP_400			24
+#define TOP_MOUT_BUS2_BUSTOP_400			25
+#define TOP_MOUT_BUS2_BUSTOP_100			26
+#define TOP_MOUT_BUS1_BUSTOP_100			27
+#define TOP_MOUT_BUS1_BUSTOP_400			28
+#define TOP_MOUT_SCLK_FSYS_USB				29
+#define TOP_MOUT_SCLK_FSYS_MMC0_SDCLKIN_A		30
+#define TOP_MOUT_SCLK_FSYS_MMC1_SDCLKIN_A		31
+#define TOP_MOUT_SCLK_FSYS_MMC2_SDCLKIN_A		32
+#define TOP_MOUT_SCLK_FSYS_MMC0_SDCLKIN_B		33
+#define TOP_MOUT_SCLK_FSYS_MMC1_SDCLKIN_B		34
+#define TOP_MOUT_SCLK_FSYS_MMC2_SDCLKIN_B		35
+#define TOP_MOUT_ACLK_ISP1_266				36
+#define TOP_MOUT_ISP1_MEDIA_266				37
+#define TOP_MOUT_ACLK_ISP1_400				38
+#define TOP_MOUT_ISP1_MEDIA_400				39
+#define TOP_MOUT_SCLK_ISP1_SPI0				40
+#define TOP_MOUT_SCLK_ISP1_SPI1				41
+#define TOP_MOUT_SCLK_ISP1_UART				42
+#define TOP_MOUT_SCLK_ISP1_SENSOR2			43
+#define TOP_MOUT_SCLK_ISP1_SENSOR1			44
+#define TOP_MOUT_SCLK_ISP1_SENSOR0			45
+#define TOP_MOUT_ACLK_MFC_333				46
+#define TOP_MOUT_MFC_BUSTOP_333				47
+#define TOP_MOUT_ACLK_G2D_333				48
+#define TOP_MOUT_G2D_BUSTOP_333				49
+#define TOP_MOUT_ACLK_GSCL_FIMC				50
+#define TOP_MOUT_GSCL_BUSTOP_FIMC			51
+#define TOP_MOUT_ACLK_GSCL_333				52
+#define TOP_MOUT_GSCL_BUSTOP_333			53
+#define TOP_MOUT_ACLK_GSCL_400				54
+#define TOP_MOUT_M2M_MEDIATOP_400			55
+#define TOP_DOUT_ACLK_MFC_333				56
+#define TOP_DOUT_ACLK_G2D_333				57
+#define TOP_DOUT_SCLK_ISP1_SENSOR2_A			58
+#define TOP_DOUT_SCLK_ISP1_SENSOR1_A			59
+#define TOP_DOUT_SCLK_ISP1_SENSOR0_A			60
+#define TOP_DOUT_ACLK_GSCL_FIMC				61
+#define TOP_DOUT_ACLK_GSCL_400				62
+#define TOP_DOUT_ACLK_GSCL_333				63
+#define TOP_DOUT_SCLK_ISP1_SPI0_B			64
+#define TOP_DOUT_SCLK_ISP1_SPI0_A			65
+#define TOP_DOUT_ACLK_ISP1_400				66
+#define TOP_DOUT_ACLK_ISP1_266				67
+#define TOP_DOUT_SCLK_ISP1_UART				68
+#define TOP_DOUT_SCLK_ISP1_SPI1_B			69
+#define TOP_DOUT_SCLK_ISP1_SPI1_A			70
+#define TOP_DOUT_SCLK_ISP1_SENSOR2_B			71
+#define TOP_DOUT_SCLK_ISP1_SENSOR1_B			72
+#define TOP_DOUT_SCLK_ISP1_SENSOR0_B			73
+#define TOP_DOUTTOP__SCLK_HPM_TARGETCLK			74
+#define TOP_DOUT_SCLK_DISP_PIXEL			75
+#define TOP_DOUT_ACLK_DISP_222				76
+#define TOP_DOUT_ACLK_DISP_333				77
+#define TOP_DOUT_ACLK_BUS4_100				78
+#define TOP_DOUT_ACLK_BUS4_400				79
+#define TOP_DOUT_ACLK_BUS3_100				80
+#define TOP_DOUT_ACLK_BUS3_400				81
+#define TOP_DOUT_ACLK_BUS2_100				82
+#define TOP_DOUT_ACLK_BUS2_400				83
+#define TOP_DOUT_ACLK_BUS1_100				84
+#define TOP_DOUT_ACLK_BUS1_400				85
+#define TOP_DOUT_SCLK_PERI_SPI1_B			86
+#define TOP_DOUT_SCLK_PERI_SPI1_A			87
+#define TOP_DOUT_SCLK_PERI_SPI0_B			88
+#define TOP_DOUT_SCLK_PERI_SPI0_A			89
+#define TOP_DOUT_SCLK_PERI_UART0			90
+#define TOP_DOUT_SCLK_PERI_UART2			91
+#define TOP_DOUT_SCLK_PERI_UART1			92
+#define TOP_DOUT_SCLK_PERI_SPI2_B			93
+#define TOP_DOUT_SCLK_PERI_SPI2_A			94
+#define TOP_DOUT_ACLK_PERI_AUD				95
+#define TOP_DOUT_ACLK_PERI_66				96
+#define TOP_DOUT_SCLK_FSYS_MMC0_SDCLKIN_B		97
+#define TOP_DOUT_SCLK_FSYS_MMC0_SDCLKIN_A		98
+#define TOP_DOUT_SCLK_FSYS_USBDRD30_SUSPEND_CLK		99
+#define TOP_DOUT_ACLK_FSYS_200				100
+#define TOP_DOUT_SCLK_FSYS_MMC2_SDCLKIN_B		101
+#define TOP_DOUT_SCLK_FSYS_MMC2_SDCLKIN_A		102
+#define TOP_DOUT_SCLK_FSYS_MMC1_SDCLKIN_B		103
+#define TOP_DOUT_SCLK_FSYS_MMC1_SDCLKIN_A		104
+#define TOP_SCLK_FIMD1					105
+#define TOP_SCLK_MMC2					106
+#define TOP_SCLK_MMC1					107
+#define TOP_SCLK_MMC0					108
+#define PHYCLK_DPTX_PHY_CH3_TXD_CLK			109
+#define PHYCLK_DPTX_PHY_CH2_TXD_CLK			110
+#define PHYCLK_DPTX_PHY_CH1_TXD_CLK			111
+#define PHYCLK_DPTX_PHY_CH0_TXD_CLK			112
+#define phyclk_hdmi_phy_tmds_clko			113
+#define PHYCLK_HDMI_PHY_PIXEL_CLKO			114
+#define PHYCLK_HDMI_LINK_O_TMDS_CLKHI			115
+#define PHYCLK_MIPI_DPHY_4L_M_TXBYTECLKHS		116
+#define PHYCLK_DPTX_PHY_O_REF_CLK_24M			117
+#define PHYCLK_DPTX_PHY_CLK_DIV2			118
+#define PHYCLK_MIPI_DPHY_4L_M_RXCLKESC0			119
+#define PHYCLK_USBHOST20_PHY_PHYCLOCK			120
+#define PHYCLK_USBHOST20_PHY_FREECLK			121
+#define PHYCLK_USBHOST20_PHY_CLK48MOHCI			122
+#define PHYCLK_USBDRD30_UDRD30_PIPE_PCLK		123
+#define PHYCLK_USBDRD30_UDRD30_PHYCLOCK			124
+#define TOP_NR_CLK					125
+
+
+/* List Of Clocks For CMU_EGL */
+
+#define EGL_FOUT_EGL_PLL				1
+#define EGL_FOUT_EGL_DPLL				2
+#define EGL_MOUT_EGL_B					3
+#define EGL_MOUT_EGL_PLL				4
+#define EGL_DOUT_EGL_PLL				5
+#define EGL_DOUT_EGL_PCLK_DBG				6
+#define EGL_DOUT_EGL_ATCLK				7
+#define EGL_DOUT_PCLK_EGL				8
+#define EGL_DOUT_ACLK_EGL				9
+#define EGL_DOUT_EGL2					10
+#define EGL_DOUT_EGL1					11
+#define EGL_NR_CLK					12
+
+
+/* List Of Clocks For CMU_KFC */
+
+#define KFC_FOUT_KFC_PLL				1
+#define KFC_MOUT_KFC_PLL				2
+#define KFC_MOUT_KFC					3
+#define KFC_DOUT_KFC_PLL				4
+#define KFC_DOUT_PCLK_KFC				5
+#define KFC_DOUT_ACLK_KFC				6
+#define KFC_DOUT_KFC_PCLK_DBG				7
+#define KFC_DOUT_KFC_ATCLK				8
+#define KFC_DOUT_KFC2					9
+#define KFC_DOUT_KFC1					10
+#define KFC_NR_CLK					11
+
+
+/* List Of Clocks For CMU_MIF */
+
+#define MIF_FOUT_MEM_PLL				1
+#define MIF_FOUT_MEDIA_PLL				2
+#define MIF_FOUT_BUS_PLL				3
+#define MIF_MOUT_CLK2X_PHY				4
+#define MIF_MOUT_MIF_DREX2X				5
+#define MIF_MOUT_CLKM_PHY				6
+#define MIF_MOUT_MIF_DREX				7
+#define MIF_MOUT_MEDIA_PLL				8
+#define MIF_MOUT_BUS_PLL				9
+#define MIF_MOUT_MEM_PLL				10
+#define MIF_DOUT_ACLK_BUS_100				11
+#define MIF_DOUT_ACLK_BUS_200				12
+#define MIF_DOUT_ACLK_MIF_466				13
+#define MIF_DOUT_CLK2X_PHY				14
+#define MIF_DOUT_CLKM_PHY				15
+#define MIF_DOUT_BUS_PLL				16
+#define MIF_DOUT_MEM_PLL				17
+#define MIF_DOUT_MEDIA_PLL				18
+#define MIF_CLK_LPDDR3PHY_WRAP1				19
+#define MIF_CLK_LPDDR3PHY_WRAP0				20
+#define MIF_CLK_MONOCNT					21
+#define MIF_CLK_MIF_RTC					22
+#define MIF_CLK_DREX1					23
+#define MIF_CLK_DREX0					24
+#define MIF_CLK_INTMEM					25
+#define MIF_SCLK_LPDDR3PHY_WRAP_U1			26
+#define MIF_SCLK_LPDDR3PHY_WRAP_U0			27
+#define MIF_NR_CLK					28
+
+
+/* List Of Clocks For CMU_G3D */
+
+#define G3D_FOUT_G3D_PLL				1
+#define G3D_MOUT_G3D_PLL				2
+#define G3D_DOUT_PCLK_G3D				3
+#define G3D_DOUT_ACLK_G3D				4
+#define G3D_CLK_G3D_HPM					5
+#define G3D_CLK_G3D					6
+#define G3D_NR_CLK					7
+
+
+/* List Of Clocks For CMU_AUD */
+
+#define AUD_MOUT_SCLK_AUD_PCM				1
+#define AUD_MOUT_SCLK_AUD_I2S				2
+#define AUD_MOUT_AUD_PLL_USER				3
+#define AUD_DOUT_ACLK_AUD_131				4
+#define AUD_DOUT_SCLK_AUD_UART				5
+#define AUD_DOUT_SCLK_AUD_PCM				6
+#define AUD_DOUT_SCLK_AUD_I2S				7
+#define AUD_CLK_AUD_UART				8
+#define AUD_CLK_PCM					9
+#define AUD_CLK_I2S					10
+#define AUD_CLK_DMAC					11
+#define AUD_CLK_SRAMC					12
+#define AUD_SCLK_AUD_UART				13
+#define AUD_SCLK_PCM					14
+#define AUD_SCLK_I2S					15
+#define AUD_NR_CLK					16
+
+
+/* List Of Clocks For CMU_MFC */
+
+#define MFC_MOUT_ACLK_MFC_333_USER			1
+#define MFC_DOUT_PCLK_MFC_83				2
+#define MFC_CLK_MFC					3
+#define MFC_CLK_SMMU2_MFCM1				4
+#define MFC_CLK_SMMU2_MFCM0				5
+#define MFC_NR_CLK					6
+
+
+/* List Of Clocks For CMU_GSCL */
+
+#define GSCL_MOUT_ACLK_CSIS				1
+#define GSCL_MOUT_ACLK_GSCL_FIMC_USER			2
+#define GSCL_MOUT_ACLK_M2M_400_USER			3
+#define GSCL_MOUT_ACLK_GSCL_333_USER			4
+#define GSCL_DOUT_ACLK_CSIS_200				5
+#define GSCL_DOUT_PCLK_M2M_100				6
+#define GSCL_CLK_PIXEL_GSCL1				7
+#define GSCL_CLK_PIXEL_GSCL0				8
+#define GSCL_CLK_MSCL1					9
+#define GSCL_CLK_MSCL0					10
+#define GSCL_CLK_GSCL1					11
+#define GSCL_CLK_GSCL0					12
+#define GSCL_CLK_FIMC_LITE_D				13
+#define GSCL_CLK_FIMC_LITE_B				14
+#define GSCL_CLK_FIMC_LITE_A				15
+#define GSCL_CLK_CSIS1					16
+#define GSCL_CLK_CSIS0					17
+#define GSCL_CLK_SMMU3_LITE_D				18
+#define GSCL_CLK_SMMU3_LITE_B				19
+#define GSCL_CLK_SMMU3_LITE_A				20
+#define GSCL_CLK_SMMU3_GSCL0				21
+#define GSCL_CLK_SMMU3_GSCL1				22
+#define GSCL_CLK_SMMU3_MSCL0				23
+#define GSCL_CLK_SMMU3_MSCL1				24
+#define GSCL_SCLK_CSIS1_WRAP				25
+#define GSCL_SCLK_CSIS0_WRAP				26
+#define GSCL_NR_CLK					27
+
+
+/* List Of Clocks For CMU_FSYS */
+
+#define FSYS_MOUT_PHYCLK_USBHOST20_PHYCLK_USER		1
+#define FSYS_MOUT_PHYCLK_USBHOST20_FREECLK_USER		2
+#define FSYS_MOUT_PHYCLK_USBHOST20_CLK48MOHCI_USER	3
+#define FSYS_MOUT_PHYCLK_USBDRD30_PIPE_PCLK_USER	4
+#define FSYS_MOUT_PHYCLK_USBDRD30_PHYCLOCK_USER		5
+#define FSYS_CLK_TSI					6
+#define FSYS_CLK_USBLINK				7
+#define FSYS_CLK_USBHOST20				8
+#define FSYS_CLK_USBDRD30				9
+#define FSYS_CLK_SROMC					10
+#define FSYS_CLK_PDMA					11
+#define FSYS_CLK_MMC2					12
+#define FSYS_CLK_MMC1					13
+#define FSYS_CLK_MMC0					14
+#define FSYS_CLK_RTIC					15
+#define FSYS_CLK_SMMU_RTIC				16
+#define FSYS_PHYCLK_USBDRD30				17
+#define FSYS_PHYCLK_USBHOST20				18
+#define FSYS_NR_CLK					19
+
+
+/* List Of Clocks For CMU_PERI */
+
+#define PERI_MOUT_SCLK_SPDIF				1
+#define PERI_MOUT_SCLK_I2SCOD				2
+#define PERI_MOUT_SCLK_PCM				3
+#define PERI_DOUT_I2S					4
+#define PERI_DOUT_PCM					5
+#define PERI_CLK_WDT_KFC				6
+#define PERI_CLK_WDT_EGL				7
+#define PERI_CLK_HSIC3					8
+#define PERI_CLK_HSIC2					9
+#define PERI_CLK_HSIC1					10
+#define PERI_CLK_HSIC0					11
+#define PERI_CLK_PCM					12
+#define PERI_CLK_MCT					13
+#define PERI_CLK_I2S					14
+#define PERI_CLK_I2CHDMI				15
+#define PERI_CLK_I2C7					16
+#define PERI_CLK_I2C6					17
+#define PERI_CLK_I2C5					18
+#define PERI_CLK_I2C4					19
+#define PERI_CLK_I2C9					20
+#define PERI_CLK_I2C8					21
+#define PERI_CLK_I2C11					22
+#define PERI_CLK_I2C10					23
+#define PERI_CLK_HDMICEC				24
+#define PERI_CLK_EFUSE_WRITER				25
+#define PERI_CLK_ABB					26
+#define PERI_CLK_UART2					27
+#define PERI_CLK_UART1					28
+#define PERI_CLK_UART0					29
+#define PERI_CLK_ADC					30
+#define PERI_CLK_TMU4					31
+#define PERI_CLK_TMU3					32
+#define PERI_CLK_TMU2					33
+#define PERI_CLK_TMU1					34
+#define PERI_CLK_TMU0					35
+#define PERI_CLK_SPI2					36
+#define PERI_CLK_SPI1					37
+#define PERI_CLK_SPI0					38
+#define PERI_CLK_SPDIF					39
+#define PERI_CLK_PWM					40
+#define PERI_CLK_UART4					41
+#define PERI_CLK_CHIPID					42
+#define PERI_CLK_PROVKEY0				43
+#define PERI_CLK_PROVKEY1				44
+#define PERI_CLK_SECKEY					45
+#define PERI_CLK_TOP_RTC				46
+#define PERI_CLK_TZPC10					47
+#define PERI_CLK_TZPC9					48
+#define PERI_CLK_TZPC8					49
+#define PERI_CLK_TZPC7					50
+#define PERI_CLK_TZPC6					51
+#define PERI_CLK_TZPC5					52
+#define PERI_CLK_TZPC4					53
+#define PERI_CLK_TZPC3					54
+#define PERI_CLK_TZPC2					55
+#define PERI_CLK_TZPC1					56
+#define PERI_CLK_TZPC0					57
+#define PERI_SCLK_UART2					58
+#define PERI_SCLK_UART1					59
+#define PERI_SCLK_UART0					60
+#define PERI_SCLK_SPI2					61
+#define PERI_SCLK_SPI1					62
+#define PERI_SCLK_SPI0					63
+#define PERI_SCLK_SPDIF					64
+#define PERI_SCLK_I2S					65
+#define PERI_SCLK_PCM1					66
+#define PERI_NR_CLK					67
+
+
+/* List Of Clocks For CMU_DISP */
+
+#define DISP_MOUT_SCLK_HDMI_SPDIF			1
+#define DISP_MOUT_SCLK_HDMI_PIXEL			2
+#define DISP_MOUT_PHYCLK_MIPI_DPHY_4LMRXCLK_ESC0_USER	3
+#define DISP_MOUT_PHYCLK_HDMI_PHY_TMDS_CLKO_USER	4
+#define DISP_MOUT_PHYCLK_HDMI_PHY_REF_CLKO_USER		5
+#define DISP_MOUT_HDMI_PHY_PIXEL			6
+#define DISP_MOUT_PHYCLK_HDMI_LINK_O_TMDS_CLKHI_USER	7
+#define DISP_MOUT_PHYCLK_MIPI_DPHY_4L_M_TXBYTE_CLKHS	8
+#define DISP_MOUT_PHYCLK_DPTX_PHY_O_REF_CLK_24M_USER	9
+#define DISP_MOUT_PHYCLK_DPTX_PHY_CLK_DIV2_USER		10
+#define DISP_MOUT_PHYCLK_DPTX_PHY_CH3_TXD_CLK_USER	11
+#define DISP_MOUT_PHYCLK_DPTX_PHY_CH2_TXD_CLK_USER	12
+#define DISP_MOUT_PHYCLK_DPTX_PHY_CH1_TXD_CLK_USER	13
+#define DISP_MOUT_PHYCLK_DPTX_PHY_CH0_TXD_CLK_USER	14
+#define DISP_MOUT_ACLK_DISP_222_USER			15
+#define DISP_MOUT_SCLK_DISP_PIXEL_USER			16
+#define DISP_MOUT_ACLK_DISP_333_USER			17
+#define DISP_DOUT_SCLK_HDMI_PHY_PIXEL_CLKI		18
+#define DISP_DOUT_SCLK_FIMD1_EXTCLKPLL			19
+#define DISP_DOUT_PCLK_DISP_111				20
+#define DISP_CLK_SMMU_TV				21
+#define DISP_CLK_SMMU_FIMD1M1				22
+#define DISP_CLK_SMMU_FIMD1M0				23
+#define DISP_CLK_PIXEL_MIXER				24
+#define DISP_CLK_PIXEL_DISP				25
+#define DISP_CLK_MIXER					26
+#define DISP_CLK_MIPIPHY				27
+#define DISP_CLK_HDMIPHY				28
+#define DISP_CLK_HDMI					29
+#define DISP_CLK_FIMD1					30
+#define DISP_CLK_DSIM1					31
+#define DISP_CLK_DPPHY					32
+#define DISP_CLK_DP					33
+#define DISP_SCLK_PIXEL					34
+#define DISP_MOUT_HDMI_PHY_PIXEL_USER			35
+#define DISP_NR_CLK					36
+
+
+/* List Of Clocks For CMU_G2D */
+
+#define G2D_MOUT_ACLK_G2D_333_USER			1
+#define G2D_DOUT_PCLK_G2D_83				2
+#define G2D_CLK_SMMU3_JPEG				3
+#define G2D_CLK_MDMA					4
+#define G2D_CLK_JPEG					5
+#define G2D_CLK_G2D					6
+#define G2D_CLK_SSS					7
+#define G2D_CLK_SLIM_SSS				8
+#define G2D_CLK_SMMU_SLIM_SSS				9
+#define G2D_CLK_SMMU_SSS				10
+#define G2D_CLK_SMMU_MDMA				11
+#define G2D_CLK_SMMU3_G2D				12
+#define G2D_NR_CLK					13
+
+
+/* List Of Clocks For CMU_ISP */
+
+#define ISP_MOUT_ISP_400_USER				1
+#define ISP_MOUT_ISP_266_USER				2
+#define ISP_DOUT_SCLK_MPWM				3
+#define ISP_DOUT_CA5_PCLKDBG				4
+#define ISP_DOUT_CA5_ATCLKIN				5
+#define ISP_DOUT_PCLK_ISP_133				6
+#define ISP_DOUT_PCLK_ISP_66				7
+#define ISP_CLK_GIC					8
+#define ISP_CLK_WDT					9
+#define ISP_CLK_UART					10
+#define ISP_CLK_SPI1					11
+#define ISP_CLK_SPI0					12
+#define ISP_CLK_SMMU_SCALERP				13
+#define ISP_CLK_SMMU_SCALERC				14
+#define ISP_CLK_SMMU_ISPCX				15
+#define ISP_CLK_SMMU_ISP				16
+#define ISP_CLK_SMMU_FD					17
+#define ISP_CLK_SMMU_DRC				18
+#define ISP_CLK_PWM					19
+#define ISP_CLK_MTCADC					20
+#define ISP_CLK_MPWM					21
+#define ISP_CLK_MCUCTL					22
+#define ISP_CLK_I2C1					23
+#define ISP_CLK_I2C0					24
+#define ISP_CLK_FIMC_SCALERP				25
+#define ISP_CLK_FIMC_SCALERC				26
+#define ISP_CLK_FIMC					27
+#define ISP_CLK_FIMC_FD					28
+#define ISP_CLK_FIMC_DRC				29
+#define ISP_CLK_CA5					30
+#define ISP_SCLK_SPI0_EXT				31
+#define ISP_SCLK_SPI1_EXT				32
+#define ISP_SCLK_UART_EXT				33
+#define ISP_NR_CLK					34
+
+#endif

include/dt-bindings/clock/exynos5420.h

@@ -58,6 +58,9 @@
 #define CLK_SCLK_GSCL_WA	156
 #define CLK_SCLK_GSCL_WB	157
 #define CLK_SCLK_HDMIPHY	158
+#define CLK_MAU_EPLL		159
+#define CLK_SCLK_HSIC_12M	160
+#define CLK_SCLK_MPHY_IXTAL24	161
 
 /* gate clocks */
 #define CLK_ACLK66_PERIC	256
@@ -69,10 +72,10 @@
 #define CLK_I2C1		262
 #define CLK_I2C2		263
 #define CLK_I2C3		264
-#define CLK_I2C4		265
-#define CLK_I2C5		266
-#define CLK_I2C6		267
-#define CLK_I2C7		268
+#define CLK_USI0		265
+#define CLK_USI1		266
+#define CLK_USI2		267
+#define CLK_USI3		268
 #define CLK_I2C_HDMI		269
 #define CLK_TSADC		270
 #define CLK_SPI0		271
@@ -85,9 +88,9 @@
 #define CLK_PCM2		278
 #define CLK_PWM			279
 #define CLK_SPDIF		280
-#define CLK_I2C8		281
-#define CLK_I2C9		282
-#define CLK_I2C10		283
+#define CLK_USI4		281
+#define CLK_USI5		282
+#define CLK_USI6		283
 #define CLK_ACLK66_PSGEN	300
 #define CLK_CHIPID		301
 #define CLK_SYSREG		302
@@ -140,7 +143,8 @@
 #define CLK_HDMI		413
 #define CLK_ACLK300_DISP1	420
 #define CLK_FIMD1		421
-#define CLK_SMMU_FIMD1		422
+#define CLK_SMMU_FIMD1M0	422
+#define CLK_SMMU_FIMD1M1	423
 #define CLK_ACLK166		430
 #define CLK_MIXER		431
 #define CLK_ACLK266		440
@@ -152,6 +156,7 @@
 #define CLK_JPEG		451
 #define CLK_JPEG2		452
 #define CLK_SMMU_JPEG		453
+#define CLK_SMMU_JPEG2		454
 #define CLK_ACLK300_GSCL	460
 #define CLK_SMMU_GSCL0		461
 #define CLK_SMMU_GSCL1		462
@@ -159,7 +164,7 @@
 #define CLK_GSCL_WB		464
 #define CLK_GSCL0		465
 #define CLK_GSCL1		466
-#define CLK_CLK_3AA		467
+#define CLK_FIMC_3AA		467
 #define CLK_ACLK266_G2D		470
 #define CLK_SSS			471
 #define CLK_SLIM_SSS		472
@@ -172,12 +177,32 @@
 #define CLK_SMMU_FIMCL1		493
 #define CLK_SMMU_FIMCL3		494
 #define CLK_FIMC_LITE3		495
+#define CLK_FIMC_LITE0		496
+#define CLK_FIMC_LITE1		497
 #define CLK_ACLK_G3D		500
 #define CLK_G3D			501
 #define CLK_SMMU_MIXER		502
+#define CLK_SMMU_G2D		503
+#define CLK_SMMU_MDMA0		504
+#define CLK_MC			505
+#define CLK_TOP_RTC		506
+#define CLK_SCLK_UART_ISP	510
+#define CLK_SCLK_SPI0_ISP	511
+#define CLK_SCLK_SPI1_ISP	512
+#define CLK_SCLK_PWM_ISP	513
+#define CLK_SCLK_ISP_SENSOR0	514
+#define CLK_SCLK_ISP_SENSOR1	515
+#define CLK_SCLK_ISP_SENSOR2	516
+#define CLK_ACLK432_SCALER	517
+#define CLK_ACLK432_CAM		518
+#define CLK_ACLK_FL1550_CAM	519
+#define CLK_ACLK550_CAM		520
 
 /* mux clocks */
 #define CLK_MOUT_HDMI		640
+#define CLK_MOUT_G3D		641
+#define CLK_MOUT_VPLL		642
+#define CLK_MOUT_MAUDIO0	643
 
 /* divider clocks */
 #define CLK_DOUT_PIXEL		768

include/dt-bindings/clock/s3c2410.h

@@ -0,0 +1,62 @@
+/*
+ * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Device Tree binding constants clock controllers of Samsung S3C2410 and later.
+ */
+
+#ifndef _DT_BINDINGS_CLOCK_SAMSUNG_S3C2410_CLOCK_H
+#define _DT_BINDINGS_CLOCK_SAMSUNG_S3C2410_CLOCK_H
+
+/*
+ * Let each exported clock get a unique index, which is used on DT-enabled
+ * platforms to lookup the clock from a clock specifier. These indices are
+ * therefore considered an ABI and so must not be changed. This implies
+ * that new clocks should be added either in free spaces between clock groups
+ * or at the end.
+ */
+
+/* Core clocks. */
+
+/* id 1 is reserved */
+#define MPLL			2
+#define UPLL			3
+#define FCLK			4
+#define HCLK			5
+#define PCLK			6
+#define UCLK			7
+#define ARMCLK			8
+
+/* pclk-gates */
+#define PCLK_UART0		16
+#define PCLK_UART1		17
+#define PCLK_UART2		18
+#define PCLK_I2C		19
+#define PCLK_SDI		20
+#define PCLK_SPI		21
+#define PCLK_ADC		22
+#define PCLK_AC97		23
+#define PCLK_I2S		24
+#define PCLK_PWM		25
+#define PCLK_RTC		26
+#define PCLK_GPIO		27
+
+
+/* hclk-gates */
+#define HCLK_LCD		32
+#define HCLK_USBH		33
+#define HCLK_USBD		34
+#define HCLK_NAND		35
+#define HCLK_CAM		36
+
+
+#define CAMIF			40
+
+
+/* Total number of clocks. */
+#define NR_CLKS			(CAMIF + 1)
+
+#endif /* _DT_BINDINGS_CLOCK_SAMSUNG_S3C2443_CLOCK_H */

include/dt-bindings/clock/s3c2412.h

@@ -0,0 +1,73 @@
+/*
+ * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Device Tree binding constants clock controllers of Samsung S3C2412.
+ */
+
+#ifndef _DT_BINDINGS_CLOCK_SAMSUNG_S3C2412_CLOCK_H
+#define _DT_BINDINGS_CLOCK_SAMSUNG_S3C2412_CLOCK_H
+
+/*
+ * Let each exported clock get a unique index, which is used on DT-enabled
+ * platforms to lookup the clock from a clock specifier. These indices are
+ * therefore considered an ABI and so must not be changed. This implies
+ * that new clocks should be added either in free spaces between clock groups
+ * or at the end.
+ */
+
+/* Core clocks. */
+
+/* id 1 is reserved */
+#define MPLL			2
+#define UPLL			3
+#define MDIVCLK			4
+#define MSYSCLK			5
+#define USYSCLK			6
+#define HCLK			7
+#define PCLK			8
+#define ARMDIV			9
+#define ARMCLK			10
+
+
+/* Special clocks */
+#define SCLK_CAM		16
+#define SCLK_UART		17
+#define SCLK_I2S		18
+#define SCLK_USBD		19
+#define SCLK_USBH		20
+
+/* pclk-gates */
+#define PCLK_WDT		32
+#define PCLK_SPI		33
+#define PCLK_I2S		34
+#define PCLK_I2C		35
+#define PCLK_ADC		36
+#define PCLK_RTC		37
+#define PCLK_GPIO		38
+#define PCLK_UART2		39
+#define PCLK_UART1		40
+#define PCLK_UART0		41
+#define PCLK_SDI		42
+#define PCLK_PWM		43
+#define PCLK_USBD		44
+
+/* hclk-gates */
+#define HCLK_HALF		48
+#define HCLK_X2			49
+#define HCLK_SDRAM		50
+#define HCLK_USBH		51
+#define HCLK_LCD		52
+#define HCLK_NAND		53
+#define HCLK_DMA3		54
+#define HCLK_DMA2		55
+#define HCLK_DMA1		56
+#define HCLK_DMA0		57
+
+/* Total number of clocks. */
+#define NR_CLKS			(HCLK_DMA0 + 1)
+
+#endif /* _DT_BINDINGS_CLOCK_SAMSUNG_S3C2412_CLOCK_H */

include/dt-bindings/clock/s3c2443.h

@@ -0,0 +1,92 @@
+/*
+ * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Device Tree binding constants clock controllers of Samsung S3C2443 and later.
+ */
+
+#ifndef _DT_BINDINGS_CLOCK_SAMSUNG_S3C2443_CLOCK_H
+#define _DT_BINDINGS_CLOCK_SAMSUNG_S3C2443_CLOCK_H
+
+/*
+ * Let each exported clock get a unique index, which is used on DT-enabled
+ * platforms to lookup the clock from a clock specifier. These indices are
+ * therefore considered an ABI and so must not be changed. This implies
+ * that new clocks should be added either in free spaces between clock groups
+ * or at the end.
+ */
+
+/* Core clocks. */
+#define MSYSCLK			1
+#define ESYSCLK			2
+#define ARMDIV			3
+#define ARMCLK			4
+#define HCLK			5
+#define PCLK			6
+
+/* Special clocks */
+#define SCLK_HSSPI0		16
+#define SCLK_FIMD		17
+#define SCLK_I2S0		18
+#define SCLK_I2S1		19
+#define SCLK_HSMMC1		20
+#define SCLK_HSMMC_EXT		21
+#define SCLK_CAM		22
+#define SCLK_UART		23
+#define SCLK_USBH		24
+
+/* Muxes */
+#define MUX_HSSPI0		32
+#define MUX_HSSPI1		33
+#define MUX_HSMMC0		34
+#define MUX_HSMMC1		35
+
+/* hclk-gates */
+#define HCLK_DMA0		48
+#define HCLK_DMA1		49
+#define HCLK_DMA2		50
+#define HCLK_DMA3		51
+#define HCLK_DMA4		52
+#define HCLK_DMA5		53
+#define HCLK_DMA6		54
+#define HCLK_DMA7		55
+#define HCLK_CAM		56
+#define HCLK_LCD		57
+#define HCLK_USBH		58
+#define HCLK_USBD		59
+#define HCLK_IROM		60
+#define HCLK_HSMMC0		61
+#define HCLK_HSMMC1		62
+#define HCLK_CFC		63
+#define HCLK_SSMC		64
+#define HCLK_DRAM		65
+#define HCLK_2D			66
+
+/* pclk-gates */
+#define PCLK_UART0		72
+#define PCLK_UART1		73
+#define PCLK_UART2		74
+#define PCLK_UART3		75
+#define PCLK_I2C0		76
+#define PCLK_SDI		77
+#define PCLK_SPI0		78
+#define PCLK_ADC		79
+#define PCLK_AC97		80
+#define PCLK_I2S0		81
+#define PCLK_PWM		82
+#define PCLK_WDT		83
+#define PCLK_RTC		84
+#define PCLK_GPIO		85
+#define PCLK_SPI1		86
+#define PCLK_CHIPID		87
+#define PCLK_I2C1		88
+#define PCLK_I2S1		89
+#define PCLK_PCM		90
+
+/* Total number of clocks. */
+#define NR_CLKS			(PCLK_PCM + 1)
+
+#endif /* _DT_BINDINGS_CLOCK_SAMSUNG_S3C2443_CLOCK_H */