USB: Add quirk to support DJI CineSSD

This device does not correctly handle the LPM operations.

Also, the device cannot handle ATA pass-through commands
and locks up when attempted while running in super speed.

This patch adds the equivalent quirk logic as found in uas.

Signed-off-by: Tim Anderson <tsa@biglakesoftware.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/usb/core/quirks.c

@@ -410,6 +410,9 @@ static const struct usb_device_id usb_quirk_list[] = {
 	{ USB_DEVICE(0x2040, 0x7200), .driver_info =
 			USB_QUIRK_CONFIG_INTF_STRINGS },
 
+	/* DJI CineSSD */
+	{ USB_DEVICE(0x2ca3, 0x0031), .driver_info = USB_QUIRK_NO_LPM },
+
 	/* INTEL VALUE SSD */
 	{ USB_DEVICE(0x8086, 0xf1a5), .driver_info = USB_QUIRK_RESET_RESUME },
 

drivers/usb/storage/scsiglue.c

@@ -376,6 +376,15 @@ static int queuecommand_lck(struct scsi_cmnd *srb,
 		return 0;
 	}
 
+	if ((us->fflags & US_FL_NO_ATA_1X) &&
+			(srb->cmnd[0] == ATA_12 || srb->cmnd[0] == ATA_16)) {
+		memcpy(srb->sense_buffer, usb_stor_sense_invalidCDB,
+		       sizeof(usb_stor_sense_invalidCDB));
+		srb->result = SAM_STAT_CHECK_CONDITION;
+		done(srb);
+		return 0;
+	}
+
 	/* enqueue the command and wake up the control thread */
 	srb->scsi_done = done;
 	us->srb = srb;

drivers/usb/storage/unusual_devs.h

@@ -2288,6 +2288,13 @@ UNUSUAL_DEV(  0x2735, 0x100b, 0x0000, 0x9999,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_GO_SLOW ),
 
+/* Reported-by: Tim Anderson <tsa@biglakesoftware.com> */
+UNUSUAL_DEV(  0x2ca3, 0x0031, 0x0000, 0x9999,
+		"DJI",
+		"CineSSD",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_NO_ATA_1X),
+
 /*
  * Reported by Frederic Marchal <frederic.marchal@wowcompany.com>
  * Mio Moov 330