i2c: mv64xxx: remove CONFIG_HAVE_CLK conditionals

When clock support was added to the i2c-mv64xxx, not all clk functions
had stubs when for !CONFIG_HAVE_CLK configurations. However, nowadays,
both "struct clk" and all the clock framework functions have stubs
when CONFIG_HAVE_CLK is not enabled, so it no longer makes sense to
carry such compile-time conditionals in the driver.

This commit was compile tested on both ARM64 (which has both
CONFIG_OF=y and CONFIG_HAVE_CLK=y) and PowerPC c2k_defconfig (which
has CONFIG_OF=y, CONFIG_HAVE_CLK disabled, and the i2c-mv64xxx driver
enabled).

The only non-trivial change is in the mv64xxx_of_config() function,
which was returning -ENODEV unconditionally if CONFIG_HAVE_CLK was
disabled. Simply removing this condition works fine because the first
test done by the function is to verify if drv_data->clk points to a
valid clock, and if it doesn't, we return -ENODEV. When
CONFIG_HAVE_CLK is disabled, devm_clk_get() unconditionally returns
NULL, so mv64xxx_of_config() will return -ENODEV when no clock is
provided, which is the intended behavior.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

drivers/i2c/busses/i2c-mv64xxx.c

@@ -134,9 +134,7 @@ struct mv64xxx_i2c_data {
 	int			rc;
 	u32			freq_m;
 	u32			freq_n;
-#if defined(CONFIG_HAVE_CLK)
 	struct clk              *clk;
-#endif
 	wait_queue_head_t	waitq;
 	spinlock_t		lock;
 	struct i2c_msg		*msg;
@@ -757,7 +755,6 @@ static const struct of_device_id mv64xxx_i2c_of_match_table[] = {
 MODULE_DEVICE_TABLE(of, mv64xxx_i2c_of_match_table);
 
 #ifdef CONFIG_OF
-#ifdef CONFIG_HAVE_CLK
 static int
 mv64xxx_calc_freq(struct mv64xxx_i2c_data *drv_data,
 		  const int tclk, const int n, const int m)
@@ -791,25 +788,20 @@ mv64xxx_find_baud_factors(struct mv64xxx_i2c_data *drv_data,
 		return false;
 	return true;
 }
-#endif /* CONFIG_HAVE_CLK */
 
 static int
 mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data,
 		  struct device *dev)
 {
-	/* CLK is mandatory when using DT to describe the i2c bus. We
-	 * need to know tclk in order to calculate bus clock
-	 * factors.
-	 */
-#if !defined(CONFIG_HAVE_CLK)
-	/* Have OF but no CLK */
-	return -ENODEV;
-#else
 	const struct of_device_id *device;
 	struct device_node *np = dev->of_node;
 	u32 bus_freq, tclk;
 	int rc = 0;
 
+	/* CLK is mandatory when using DT to describe the i2c bus. We
+	 * need to know tclk in order to calculate bus clock
+	 * factors.
+	 */
 	if (IS_ERR(drv_data->clk)) {
 		rc = -ENODEV;
 		goto out;
@@ -869,7 +861,6 @@ mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data,
 
 out:
 	return rc;
-#endif
 }
 #else /* CONFIG_OF */
 static int
@@ -907,14 +898,13 @@ mv64xxx_i2c_probe(struct platform_device *pd)
 	init_waitqueue_head(&drv_data->waitq);
 	spin_lock_init(&drv_data->lock);
 
-#if defined(CONFIG_HAVE_CLK)
 	/* Not all platforms have a clk */
 	drv_data->clk = devm_clk_get(&pd->dev, NULL);
 	if (IS_ERR(drv_data->clk) && PTR_ERR(drv_data->clk) == -EPROBE_DEFER)
 		return -EPROBE_DEFER;
 	if (!IS_ERR(drv_data->clk))
 		clk_prepare_enable(drv_data->clk);
-#endif
+
 	if (pdata) {
 		drv_data->freq_m = pdata->freq_m;
 		drv_data->freq_n = pdata->freq_n;
@@ -964,11 +954,10 @@ exit_reset:
 	if (!IS_ERR_OR_NULL(drv_data->rstc))
 		reset_control_assert(drv_data->rstc);
 exit_clk:
-#if defined(CONFIG_HAVE_CLK)
 	/* Not all platforms have a clk */
 	if (!IS_ERR(drv_data->clk))
 		clk_disable_unprepare(drv_data->clk);
-#endif
+
 	return rc;
 }
 
@@ -981,11 +970,9 @@ mv64xxx_i2c_remove(struct platform_device *dev)
 	free_irq(drv_data->irq, drv_data);
 	if (!IS_ERR_OR_NULL(drv_data->rstc))
 		reset_control_assert(drv_data->rstc);
-#if defined(CONFIG_HAVE_CLK)
 	/* Not all platforms have a clk */
 	if (!IS_ERR(drv_data->clk))
 		clk_disable_unprepare(drv_data->clk);
-#endif
 
 	return 0;
 }