MIPS: Separate MAAR V bit into VL and VH for XPA

The MAAR V bit has been renamed VL since another bit called VH is added
at the top of the register when it is extended to 64-bits on a 32-bit
processor with XPA. Rename the V definition, fix the various users, and
add definitions for the VH bit. Also add a definition for the MAARI
Index field.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org

arch/mips/include/asm/maar.h

@@ -36,7 +36,7 @@ unsigned platform_maar_init(unsigned num_pairs);
  * @upper:	The highest address that the MAAR pair will affect. Must be
  *		aligned to one byte before a 2^16 byte boundary.
  * @attrs:	The accessibility attributes to program, eg. MIPS_MAAR_S. The
- *		MIPS_MAAR_V attribute will automatically be set.
+ *		MIPS_MAAR_VL attribute will automatically be set.
  *
  * Program the pair of MAAR registers specified by idx to apply the attributes
  * specified by attrs to the range of addresses from lower to higher.
@@ -49,10 +49,10 @@ static inline void write_maar_pair(unsigned idx, phys_addr_t lower,
 	BUG_ON(((upper & 0xffff) != 0xffff)
 		|| ((upper & ~0xffffull) & ~(MIPS_MAAR_ADDR << 4)));
 
-	/* Automatically set MIPS_MAAR_V */
-	attrs |= MIPS_MAAR_V;
+	/* Automatically set MIPS_MAAR_VL */
+	attrs |= MIPS_MAAR_VL;
 
-	/* Write the upper address & attributes (only MIPS_MAAR_V matters) */
+	/* Write the upper address & attributes (only MIPS_MAAR_VL matters) */
 	write_c0_maari(idx << 1);
 	back_to_back_c0_hazard();
 	write_c0_maar(((upper >> 4) & MIPS_MAAR_ADDR) | attrs);
@@ -81,7 +81,7 @@ extern void maar_init(void);
  * @upper:	The highest address that the MAAR pair will affect. Must be
  *		aligned to one byte before a 2^16 byte boundary.
  * @attrs:	The accessibility attributes to program, eg. MIPS_MAAR_S. The
- *		MIPS_MAAR_V attribute will automatically be set.
+ *		MIPS_MAAR_VL attribute will automatically be set.
  *
  * Describes the configuration of a pair of Memory Accessibility Attribute
  * Registers - applying attributes from attrs to the range of physical

arch/mips/include/asm/mipsregs.h

@@ -34,8 +34,10 @@
  */
 #ifdef __ASSEMBLY__
 #define _ULCAST_
+#define _U64CAST_
 #else
 #define _ULCAST_ (unsigned long)
+#define _U64CAST_ (u64)
 #endif
 
 /*
@@ -719,10 +721,14 @@
 #define XLR_PERFCTRL_ALLTHREADS	(_ULCAST_(1) << 13)
 
 /* MAAR bit definitions */
+#define MIPS_MAAR_VH		(_U64CAST_(1) << 63)
 #define MIPS_MAAR_ADDR		((BIT_ULL(BITS_PER_LONG - 12) - 1) << 12)
 #define MIPS_MAAR_ADDR_SHIFT	12
 #define MIPS_MAAR_S		(_ULCAST_(1) << 1)
-#define MIPS_MAAR_V		(_ULCAST_(1) << 0)
+#define MIPS_MAAR_VL		(_ULCAST_(1) << 0)
+
+/* MAARI bit definitions */
+#define MIPS_MAARI_INDEX	(_ULCAST_(0x3f) << 0)
 
 /* EBase bit definitions */
 #define MIPS_EBASE_CPUNUM_SHIFT	0

arch/mips/mm/init.c

@@ -348,7 +348,7 @@ void maar_init(void)
 		upper = ((upper & MIPS_MAAR_ADDR) << 4) | 0xffff;
 
 		pr_info("  [%d]: ", i / 2);
-		if (!(attr & MIPS_MAAR_V)) {
+		if (!(attr & MIPS_MAAR_VL)) {
 			pr_cont("disabled\n");
 			continue;
 		}