Merge branch 'x86/hyperv' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

To resolve conflicts with the PV TLB flush series.

Documentation/ABI/testing/sysfs-class-cxl

@@ -244,3 +244,11 @@ Description:    read only
                 Returns 1 if the psl timebase register is synchronized
                 with the core timebase register, 0 otherwise.
 Users:          https://github.com/ibm-capi/libcxl
+
+What:           /sys/class/cxl/<card>/tunneled_ops_supported
+Date:           May 2018
+Contact:        linuxppc-dev@lists.ozlabs.org
+Description:    read only
+                Returns 1 if tunneled operations are supported in capi mode,
+                0 otherwise.
+Users:          https://github.com/ibm-capi/libcxl

Documentation/admin-guide/pm/intel_pstate.rst

@@ -145,7 +145,7 @@ feature enabled.]
 
 In this mode ``intel_pstate`` registers utilization update callbacks with the
 CPU scheduler in order to run a P-state selection algorithm, either
-``powersave`` or ``performance``, depending on the ``scaling_cur_freq`` policy
+``powersave`` or ``performance``, depending on the ``scaling_governor`` policy
 setting in ``sysfs``.  The current CPU frequency information to be made
 available from the ``scaling_cur_freq`` policy attribute in ``sysfs`` is
 periodically updated by those utilization update callbacks too.

Documentation/admin-guide/pm/sleep-states.rst

@@ -15,7 +15,7 @@ Sleep States That Can Be Supported
 ==================================
 
 Depending on its configuration and the capabilities of the platform it runs on,
-the Linux kernel can support up to four system sleep states, includig
+the Linux kernel can support up to four system sleep states, including
 hibernation and up to three variants of system suspend.  The sleep states that
 can be supported by the kernel are listed below.
 

Documentation/device-mapper/thin-provisioning.txt

@@ -264,7 +264,10 @@ i) Constructor
 			   data device, but just remove the mapping.
 
       read_only: Don't allow any changes to be made to the pool
-		 metadata.
+		 metadata.  This mode is only available after the
+		 thin-pool has been created and first used in full
+		 read/write mode.  It cannot be specified on initial
+		 thin-pool creation.
 
       error_if_no_space: Error IOs, instead of queueing, if no space.
 

Documentation/devicetree/bindings/ata/ahci-platform.txt

@@ -30,7 +30,6 @@ compatible:
 Optional properties:
 - dma-coherent      : Present if dma operations are coherent
 - clocks            : a list of phandle + clock specifier pairs
-- resets            : a list of phandle + reset specifier pairs
 - target-supply     : regulator for SATA target power
 - phys              : reference to the SATA PHY node
 - phy-names         : must be "sata-phy"

Documentation/devicetree/bindings/display/panel/panel-common.txt

@@ -38,7 +38,7 @@ Display Timings
   require specific display timings. The panel-timing subnode expresses those
   timings as specified in the timing subnode section of the display timing
   bindings defined in
-  Documentation/devicetree/bindings/display/display-timing.txt.
+  Documentation/devicetree/bindings/display/panel/display-timing.txt.
 
 
 Connectivity

Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt

@@ -26,6 +26,7 @@ Required Properties:
 		- "renesas,dmac-r8a7794" (R-Car E2)
 		- "renesas,dmac-r8a7795" (R-Car H3)
 		- "renesas,dmac-r8a7796" (R-Car M3-W)
+		- "renesas,dmac-r8a77965" (R-Car M3-N)
 		- "renesas,dmac-r8a77970" (R-Car V3M)
 		- "renesas,dmac-r8a77980" (R-Car V3H)
 

Documentation/devicetree/bindings/net/can/rcar_canfd.txt

@@ -5,7 +5,9 @@ Required properties:
 - compatible: Must contain one or more of the following:
   - "renesas,rcar-gen3-canfd" for R-Car Gen3 compatible controller.
   - "renesas,r8a7795-canfd" for R8A7795 (R-Car H3) compatible controller.
-  - "renesas,r8a7796-canfd" for R8A7796 (R-Car M3) compatible controller.
+  - "renesas,r8a7796-canfd" for R8A7796 (R-Car M3-W) compatible controller.
+  - "renesas,r8a77970-canfd" for R8A77970 (R-Car V3M) compatible controller.
+  - "renesas,r8a77980-canfd" for R8A77980 (R-Car V3H) compatible controller.
 
   When compatible with the generic version, nodes must list the
   SoC-specific version corresponding to the platform first, followed by the

Documentation/devicetree/bindings/net/renesas,ravb.txt

@@ -18,6 +18,7 @@ Required properties:
 
       - "renesas,etheravb-r8a7795" for the R8A7795 SoC.
       - "renesas,etheravb-r8a7796" for the R8A7796 SoC.
+      - "renesas,etheravb-r8a77965" for the R8A77965 SoC.
       - "renesas,etheravb-r8a77970" for the R8A77970 SoC.
       - "renesas,etheravb-r8a77980" for the R8A77980 SoC.
       - "renesas,etheravb-r8a77995" for the R8A77995 SoC.

Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt

@@ -56,9 +56,9 @@ pins it needs, and how they should be configured, with regard to muxer
 configuration, drive strength and pullups. If one of these options is
 not set, its actual value will be unspecified.
 
-This driver supports the generic pin multiplexing and configuration
-bindings. For details on each properties, you can refer to
-./pinctrl-bindings.txt.
+Allwinner A1X Pin Controller supports the generic pin multiplexing and
+configuration bindings. For details on each properties, you can refer to
+ ./pinctrl-bindings.txt.
 
 Required sub-node properties:
   - pins

Documentation/devicetree/bindings/serial/renesas,sci-serial.txt

@@ -43,6 +43,8 @@ Required properties:
     - "renesas,hscif-r8a7795" for R8A7795 (R-Car H3) HSCIF compatible UART.
     - "renesas,scif-r8a7796" for R8A7796 (R-Car M3-W) SCIF compatible UART.
     - "renesas,hscif-r8a7796" for R8A7796 (R-Car M3-W) HSCIF compatible UART.
+    - "renesas,scif-r8a77965" for R8A77965 (R-Car M3-N) SCIF compatible UART.
+    - "renesas,hscif-r8a77965" for R8A77965 (R-Car M3-N) HSCIF compatible UART.
     - "renesas,scif-r8a77970" for R8A77970 (R-Car V3M) SCIF compatible UART.
     - "renesas,hscif-r8a77970" for R8A77970 (R-Car V3M) HSCIF compatible UART.
     - "renesas,scif-r8a77980" for R8A77980 (R-Car V3H) SCIF compatible UART.

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -182,6 +182,7 @@ karo	Ka-Ro electronics GmbH
 keithkoep	Keith & Koep GmbH
 keymile	Keymile GmbH
 khadas	Khadas
+kiebackpeter    Kieback & Peter GmbH
 kinetic Kinetic Technologies
 kingnovel	Kingnovel Technology Co., Ltd.
 kosagi	Sutajio Ko-Usagi PTE Ltd.

Documentation/devicetree/overlay-notes.txt

@@ -98,6 +98,14 @@ Finally, if you need to remove all overlays in one-go, just call
 of_overlay_remove_all() which will remove every single one in the correct
 order.
 
+In addition, there is the option to register notifiers that get called on
+overlay operations. See of_overlay_notifier_register/unregister and
+enum of_overlay_notify_action for details.
+
+Note that a notifier callback is not supposed to store pointers to a device
+tree node or its content beyond OF_OVERLAY_POST_REMOVE corresponding to the
+respective node it received.
+
 Overlay DTS Format
 ------------------
 

Documentation/virtual/kvm/cpuid.txt

@@ -72,8 +72,8 @@ KVM_FEATURE_CLOCKSOURCE_STABLE_BIT ||    24 || host will warn if no guest-side
 
 flag                               || value || meaning
 ==================================================================================
-KVM_HINTS_DEDICATED                ||     0 || guest checks this feature bit to
-                                   ||       || determine if there is vCPU pinning
-                                   ||       || and there is no vCPU over-commitment,
+KVM_HINTS_REALTIME                 ||     0 || guest checks this feature bit to
+                                   ||       || determine that vCPUs are never
+                                   ||       || preempted for an unlimited time,
                                    ||       || allowing optimizations
 ----------------------------------------------------------------------------------

MAINTAINERS

@@ -137,9 +137,9 @@ Maintainers List (try to look for most precise areas first)
 		-----------------------------------
 
 3C59X NETWORK DRIVER
-M:	Steffen Klassert <klassert@mathematik.tu-chemnitz.de>
+M:	Steffen Klassert <klassert@kernel.org>
 L:	netdev@vger.kernel.org
-S:	Maintained
+S:	Odd Fixes
 F:	Documentation/networking/vortex.txt
 F:	drivers/net/ethernet/3com/3c59x.c
 
@@ -3691,7 +3691,6 @@ F:	drivers/cpufreq/arm_big_little_dt.c
 
 CPU POWER MONITORING SUBSYSTEM
 M:	Thomas Renninger <trenn@suse.com>
-M:	Shuah Khan <shuahkh@osg.samsung.com>
 M:	Shuah Khan <shuah@kernel.org>
 L:	linux-pm@vger.kernel.org
 S:	Maintained
@@ -7696,10 +7695,10 @@ F:	include/linux/sunrpc/
 F:	include/uapi/linux/sunrpc/
 
 KERNEL SELFTEST FRAMEWORK
-M:	Shuah Khan <shuahkh@osg.samsung.com>
 M:	Shuah Khan <shuah@kernel.org>
 L:	linux-kselftest@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git
+Q:	https://patchwork.kernel.org/project/linux-kselftest/list/
 S:	Maintained
 F:	tools/testing/selftests/
 F:	Documentation/dev-tools/kselftest*
@@ -9873,7 +9872,7 @@ F:	include/linux/platform_data/nxp-nci.h
 F:	Documentation/devicetree/bindings/net/nfc/
 
 NFS, SUNRPC, AND LOCKD CLIENTS
-M:	Trond Myklebust <trond.myklebust@primarydata.com>
+M:	Trond Myklebust <trond.myklebust@hammerspace.com>
 M:	Anna Schumaker <anna.schumaker@netapp.com>
 L:	linux-nfs@vger.kernel.org
 W:	http://client.linux-nfs.org
@@ -12222,7 +12221,7 @@ F:	Documentation/s390/vfio-ccw.txt
 F:	include/uapi/linux/vfio_ccw.h
 
 S390 ZCRYPT DRIVER
-M:	Harald Freudenberger <freude@de.ibm.com>
+M:	Harald Freudenberger <freude@linux.ibm.com>
 L:	linux-s390@vger.kernel.org
 W:	http://www.ibm.com/developerworks/linux/linux390/
 S:	Supported
@@ -13266,6 +13265,12 @@ M:	Jan-Benedict Glaw <jbglaw@lug-owl.de>
 S:	Maintained
 F:	arch/alpha/kernel/srm_env.c
 
+ST STM32 I2C/SMBUS DRIVER
+M:	Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
+L:	linux-i2c@vger.kernel.org
+S:	Maintained
+F:	drivers/i2c/busses/i2c-stm32*
+
 STABLE BRANCH
 M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 L:	stable@vger.kernel.org
@@ -14650,7 +14655,6 @@ F:	drivers/usb/common/usb-otg-fsm.c
 
 USB OVER IP DRIVER
 M:	Valentina Manea <valentina.manea.m@gmail.com>
-M:	Shuah Khan <shuahkh@osg.samsung.com>
 M:	Shuah Khan <shuah@kernel.org>
 L:	linux-usb@vger.kernel.org
 S:	Maintained

Makefile

@@ -2,7 +2,7 @@
 VERSION = 4
 PATCHLEVEL = 17
 SUBLEVEL = 0
-EXTRAVERSION = -rc4
+EXTRAVERSION = -rc5
 NAME = Merciless Moray
 
 # *DOCUMENTATION*

arch/Kconfig

@@ -464,6 +464,10 @@ config GCC_PLUGIN_LATENT_ENTROPY
 config GCC_PLUGIN_STRUCTLEAK
 	bool "Force initialization of variables containing userspace addresses"
 	depends on GCC_PLUGINS
+	# Currently STRUCTLEAK inserts initialization out of live scope of
+	# variables from KASAN point of view. This leads to KASAN false
+	# positive reports. Prohibit this combination for now.
+	depends on !KASAN_EXTRA
 	help
 	  This plugin zero-initializes any structures containing a
 	  __user attribute. This can prevent some classes of information

arch/arm/boot/dts/imx35.dtsi

@@ -303,7 +303,7 @@
 			};
 
 			can1: can@53fe4000 {
-				compatible = "fsl,imx35-flexcan";
+				compatible = "fsl,imx35-flexcan", "fsl,imx25-flexcan";
 				reg = <0x53fe4000 0x1000>;
 				clocks = <&clks 33>, <&clks 33>;
 				clock-names = "ipg", "per";
@@ -312,7 +312,7 @@
 			};
 
 			can2: can@53fe8000 {
-				compatible = "fsl,imx35-flexcan";
+				compatible = "fsl,imx35-flexcan", "fsl,imx25-flexcan";
 				reg = <0x53fe8000 0x1000>;
 				clocks = <&clks 34>, <&clks 34>;
 				clock-names = "ipg", "per";

arch/arm/boot/dts/imx53.dtsi

@@ -551,7 +551,7 @@
 			};
 
 			can1: can@53fc8000 {
-				compatible = "fsl,imx53-flexcan";
+				compatible = "fsl,imx53-flexcan", "fsl,imx25-flexcan";
 				reg = <0x53fc8000 0x4000>;
 				interrupts = <82>;
 				clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>,
@@ -561,7 +561,7 @@
 			};
 
 			can2: can@53fcc000 {
-				compatible = "fsl,imx53-flexcan";
+				compatible = "fsl,imx53-flexcan", "fsl,imx25-flexcan";
 				reg = <0x53fcc000 0x4000>;
 				interrupts = <83>;
 				clocks = <&clks IMX5_CLK_CAN2_IPG_GATE>,

arch/arm/include/asm/kvm_mmu.h

@@ -309,6 +309,22 @@ static inline unsigned int kvm_get_vmid_bits(void)
 	return 8;
 }
 
+/*
+ * We are not in the kvm->srcu critical section most of the time, so we take
+ * the SRCU read lock here. Since we copy the data from the user page, we
+ * can immediately drop the lock again.
+ */
+static inline int kvm_read_guest_lock(struct kvm *kvm,
+				      gpa_t gpa, void *data, unsigned long len)
+{
+	int srcu_idx = srcu_read_lock(&kvm->srcu);
+	int ret = kvm_read_guest(kvm, gpa, data, len);
+
+	srcu_read_unlock(&kvm->srcu, srcu_idx);
+
+	return ret;
+}
+
 static inline void *kvm_get_hyp_vector(void)
 {
 	return kvm_ksym_ref(__kvm_hyp_vector);

arch/arm64/include/asm/cputype.h

@@ -75,6 +75,7 @@
 #define ARM_CPU_IMP_CAVIUM		0x43
 #define ARM_CPU_IMP_BRCM		0x42
 #define ARM_CPU_IMP_QCOM		0x51
+#define ARM_CPU_IMP_NVIDIA		0x4E
 
 #define ARM_CPU_PART_AEM_V8		0xD0F
 #define ARM_CPU_PART_FOUNDATION		0xD00
@@ -99,6 +100,9 @@
 #define QCOM_CPU_PART_FALKOR		0xC00
 #define QCOM_CPU_PART_KRYO		0x200
 
+#define NVIDIA_CPU_PART_DENVER		0x003
+#define NVIDIA_CPU_PART_CARMEL		0x004
+
 #define MIDR_CORTEX_A53 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A53)
 #define MIDR_CORTEX_A57 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A57)
 #define MIDR_CORTEX_A72 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A72)
@@ -114,6 +118,8 @@
 #define MIDR_QCOM_FALKOR_V1 MIDR_CPU_MODEL(ARM_CPU_IMP_QCOM, QCOM_CPU_PART_FALKOR_V1)
 #define MIDR_QCOM_FALKOR MIDR_CPU_MODEL(ARM_CPU_IMP_QCOM, QCOM_CPU_PART_FALKOR)
 #define MIDR_QCOM_KRYO MIDR_CPU_MODEL(ARM_CPU_IMP_QCOM, QCOM_CPU_PART_KRYO)
+#define MIDR_NVIDIA_DENVER MIDR_CPU_MODEL(ARM_CPU_IMP_NVIDIA, NVIDIA_CPU_PART_DENVER)
+#define MIDR_NVIDIA_CARMEL MIDR_CPU_MODEL(ARM_CPU_IMP_NVIDIA, NVIDIA_CPU_PART_CARMEL)
 
 #ifndef __ASSEMBLY__
 

arch/arm64/include/asm/kvm_mmu.h

@@ -360,6 +360,22 @@ static inline unsigned int kvm_get_vmid_bits(void)
 	return (cpuid_feature_extract_unsigned_field(reg, ID_AA64MMFR1_VMIDBITS_SHIFT) == 2) ? 16 : 8;
 }
 
+/*
+ * We are not in the kvm->srcu critical section most of the time, so we take
+ * the SRCU read lock here. Since we copy the data from the user page, we
+ * can immediately drop the lock again.
+ */
+static inline int kvm_read_guest_lock(struct kvm *kvm,
+				      gpa_t gpa, void *data, unsigned long len)
+{
+	int srcu_idx = srcu_read_lock(&kvm->srcu);
+	int ret = kvm_read_guest(kvm, gpa, data, len);
+
+	srcu_read_unlock(&kvm->srcu, srcu_idx);
+
+	return ret;
+}
+
 #ifdef CONFIG_KVM_INDIRECT_VECTORS
 /*
  * EL2 vectors can be mapped and rerouted in a number of ways,

arch/arm64/kernel/cpu_errata.c

@@ -316,6 +316,7 @@ static const struct midr_range arm64_bp_harden_smccc_cpus[] = {
 	MIDR_ALL_VERSIONS(MIDR_CAVIUM_THUNDERX2),
 	MIDR_ALL_VERSIONS(MIDR_QCOM_FALKOR_V1),
 	MIDR_ALL_VERSIONS(MIDR_QCOM_FALKOR),
+	MIDR_ALL_VERSIONS(MIDR_NVIDIA_DENVER),
 	{},
 };
 

arch/arm64/mm/init.c

@@ -646,8 +646,10 @@ static int keep_initrd __initdata;
 
 void __init free_initrd_mem(unsigned long start, unsigned long end)
 {
-	if (!keep_initrd)
+	if (!keep_initrd) {
 		free_reserved_area((void *)start, (void *)end, 0, "initrd");
+		memblock_free(__virt_to_phys(start), end - start);
+	}
 }
 
 static int __init keepinitrd_setup(char *__unused)

arch/powerpc/include/asm/ftrace.h

@@ -69,17 +69,30 @@ struct dyn_arch_ftrace {
 #endif
 
 #if defined(CONFIG_FTRACE_SYSCALLS) && !defined(__ASSEMBLY__)
-#ifdef PPC64_ELF_ABI_v1
+/*
+ * Some syscall entry functions on powerpc start with "ppc_" (fork and clone,
+ * for instance) or ppc32_/ppc64_. We should also match the sys_ variant with
+ * those.
+ */
 #define ARCH_HAS_SYSCALL_MATCH_SYM_NAME
+#ifdef PPC64_ELF_ABI_v1
+static inline bool arch_syscall_match_sym_name(const char *sym, const char *name)
+{
+	/* We need to skip past the initial dot, and the __se_sys alias */
+	return !strcmp(sym + 1, name) ||
+		(!strncmp(sym, ".__se_sys", 9) && !strcmp(sym + 6, name)) ||
+		(!strncmp(sym, ".ppc_", 5) && !strcmp(sym + 5, name + 4)) ||
+		(!strncmp(sym, ".ppc32_", 7) && !strcmp(sym + 7, name + 4)) ||
+		(!strncmp(sym, ".ppc64_", 7) && !strcmp(sym + 7, name + 4));
+}
+#else
 static inline bool arch_syscall_match_sym_name(const char *sym, const char *name)
 {
-	/*
-	 * Compare the symbol name with the system call name. Skip the .sys or .SyS
-	 * prefix from the symbol name and the sys prefix from the system call name and
-	 * just match the rest. This is only needed on ppc64 since symbol names on
-	 * 32bit do not start with a period so the generic function will work.
-	 */
-	return !strcmp(sym + 4, name + 3);
+	return !strcmp(sym, name) ||
+		(!strncmp(sym, "__se_sys", 8) && !strcmp(sym + 5, name)) ||
+		(!strncmp(sym, "ppc_", 4) && !strcmp(sym + 4, name + 4)) ||
+		(!strncmp(sym, "ppc32_", 6) && !strcmp(sym + 6, name + 4)) ||
+		(!strncmp(sym, "ppc64_", 6) && !strcmp(sym + 6, name + 4));
 }
 #endif
 #endif /* CONFIG_FTRACE_SYSCALLS && !__ASSEMBLY__ */

arch/powerpc/include/asm/paca.h

@@ -165,7 +165,6 @@ struct paca_struct {
 	u64 saved_msr;			/* MSR saved here by enter_rtas */
 	u16 trap_save;			/* Used when bad stack is encountered */
 	u8 irq_soft_mask;		/* mask for irq soft masking */
-	u8 soft_enabled;		/* irq soft-enable flag */
 	u8 irq_happened;		/* irq happened while soft-disabled */
 	u8 io_sync;			/* writel() needs spin_unlock sync */
 	u8 irq_work_pending;		/* IRQ_WORK interrupt while soft-disable */

arch/powerpc/include/asm/topology.h

@@ -91,6 +91,7 @@ extern int start_topology_update(void);
 extern int stop_topology_update(void);
 extern int prrn_is_enabled(void);
 extern int find_and_online_cpu_nid(int cpu);
+extern int timed_topology_update(int nsecs);
 #else
 static inline int start_topology_update(void)
 {
@@ -108,16 +109,12 @@ static inline int find_and_online_cpu_nid(int cpu)
 {
 	return 0;
 }
+static inline int timed_topology_update(int nsecs)
+{
+	return 0;
+}
 #endif /* CONFIG_NUMA && CONFIG_PPC_SPLPAR */
 
-#if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_NEED_MULTIPLE_NODES)
-#if defined(CONFIG_PPC_SPLPAR)
-extern int timed_topology_update(int nsecs);
-#else
-#define	timed_topology_update(nsecs)
-#endif /* CONFIG_PPC_SPLPAR */
-#endif /* CONFIG_HOTPLUG_CPU || CONFIG_NEED_MULTIPLE_NODES */
-
 #include <asm-generic/topology.h>
 
 #ifdef CONFIG_SMP

arch/powerpc/platforms/powernv/opal-nvram.c

@@ -44,6 +44,10 @@ static ssize_t opal_nvram_read(char *buf, size_t count, loff_t *index)
 	return count;
 }
 
+/*
+ * This can be called in the panic path with interrupts off, so use
+ * mdelay in that case.
+ */
 static ssize_t opal_nvram_write(char *buf, size_t count, loff_t *index)
 {
 	s64 rc = OPAL_BUSY;
@@ -58,10 +62,16 @@ static ssize_t opal_nvram_write(char *buf, size_t count, loff_t *index)
 	while (rc == OPAL_BUSY || rc == OPAL_BUSY_EVENT) {
 		rc = opal_write_nvram(__pa(buf), count, off);
 		if (rc == OPAL_BUSY_EVENT) {
-			msleep(OPAL_BUSY_DELAY_MS);
+			if (in_interrupt() || irqs_disabled())
+				mdelay(OPAL_BUSY_DELAY_MS);
+			else
+				msleep(OPAL_BUSY_DELAY_MS);
 			opal_poll_events(NULL);
 		} else if (rc == OPAL_BUSY) {
-			msleep(OPAL_BUSY_DELAY_MS);
+			if (in_interrupt() || irqs_disabled())
+				mdelay(OPAL_BUSY_DELAY_MS);
+			else
+				msleep(OPAL_BUSY_DELAY_MS);
 		}
 	}
 

arch/s390/configs/debug_defconfig

@@ -261,9 +261,9 @@ CONFIG_IP_VS_NQ=m
 CONFIG_IP_VS_FTP=m
 CONFIG_IP_VS_PE_SIP=m
 CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_TABLES_IPV4=m
+CONFIG_NF_TABLES_IPV4=y
 CONFIG_NFT_CHAIN_ROUTE_IPV4=m
-CONFIG_NF_TABLES_ARP=m
+CONFIG_NF_TABLES_ARP=y
 CONFIG_NFT_CHAIN_NAT_IPV4=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_AH=m
@@ -284,7 +284,7 @@ CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_NF_TABLES_IPV6=m
+CONFIG_NF_TABLES_IPV6=y
 CONFIG_NFT_CHAIN_ROUTE_IPV6=m
 CONFIG_NFT_CHAIN_NAT_IPV6=m
 CONFIG_IP6_NF_IPTABLES=m
@@ -305,7 +305,7 @@ CONFIG_IP6_NF_RAW=m
 CONFIG_IP6_NF_SECURITY=m
 CONFIG_IP6_NF_NAT=m
 CONFIG_IP6_NF_TARGET_MASQUERADE=m
-CONFIG_NF_TABLES_BRIDGE=m
+CONFIG_NF_TABLES_BRIDGE=y
 CONFIG_RDS=m
 CONFIG_RDS_RDMA=m
 CONFIG_RDS_TCP=m
@@ -604,7 +604,6 @@ CONFIG_DETECT_HUNG_TASK=y
 CONFIG_WQ_WATCHDOG=y
 CONFIG_PANIC_ON_OOPS=y
 CONFIG_DEBUG_TIMEKEEPING=y
-CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y
 CONFIG_PROVE_LOCKING=y
 CONFIG_LOCK_STAT=y
 CONFIG_DEBUG_LOCKDEP=y

arch/s390/configs/performance_defconfig

@@ -259,9 +259,9 @@ CONFIG_IP_VS_NQ=m
 CONFIG_IP_VS_FTP=m
 CONFIG_IP_VS_PE_SIP=m
 CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_TABLES_IPV4=m
+CONFIG_NF_TABLES_IPV4=y
 CONFIG_NFT_CHAIN_ROUTE_IPV4=m
-CONFIG_NF_TABLES_ARP=m
+CONFIG_NF_TABLES_ARP=y
 CONFIG_NFT_CHAIN_NAT_IPV4=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_AH=m
@@ -282,7 +282,7 @@ CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_NF_TABLES_IPV6=m
+CONFIG_NF_TABLES_IPV6=y
 CONFIG_NFT_CHAIN_ROUTE_IPV6=m
 CONFIG_NFT_CHAIN_NAT_IPV6=m
 CONFIG_IP6_NF_IPTABLES=m
@@ -303,7 +303,7 @@ CONFIG_IP6_NF_RAW=m
 CONFIG_IP6_NF_SECURITY=m
 CONFIG_IP6_NF_NAT=m
 CONFIG_IP6_NF_TARGET_MASQUERADE=m
-CONFIG_NF_TABLES_BRIDGE=m
+CONFIG_NF_TABLES_BRIDGE=y
 CONFIG_RDS=m
 CONFIG_RDS_RDMA=m
 CONFIG_RDS_TCP=m

arch/s390/crypto/crc32be-vx.S

@@ -13,6 +13,7 @@
  */
 
 #include <linux/linkage.h>
+#include <asm/nospec-insn.h>
 #include <asm/vx-insn.h>
 
 /* Vector register range containing CRC-32 constants */
@@ -67,6 +68,8 @@
 
 .previous
 
+	GEN_BR_THUNK %r14
+
 .text
 /*
  * The CRC-32 function(s) use these calling conventions:
@@ -203,6 +206,6 @@ ENTRY(crc32_be_vgfm_16)
 
 .Ldone:
 	VLGVF	%r2,%v2,3
-	br	%r14
+	BR_EX	%r14
 
 .previous

arch/s390/crypto/crc32le-vx.S

@@ -14,6 +14,7 @@
  */
 
 #include <linux/linkage.h>
+#include <asm/nospec-insn.h>
 #include <asm/vx-insn.h>
 
 /* Vector register range containing CRC-32 constants */
@@ -76,6 +77,7 @@
 
 .previous
 
+	GEN_BR_THUNK %r14
 
 .text
 
@@ -264,6 +266,6 @@ crc32_le_vgfm_generic:
 
 .Ldone:
 	VLGVF	%r2,%v2,2
-	br	%r14
+	BR_EX	%r14
 
 .previous

arch/s390/include/asm/nospec-insn.h

@@ -0,0 +1,196 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_S390_NOSPEC_ASM_H
+#define _ASM_S390_NOSPEC_ASM_H
+
+#include <asm/alternative-asm.h>
+#include <asm/asm-offsets.h>
+#include <asm/dwarf.h>
+
+#ifdef __ASSEMBLY__
+
+#ifdef CONFIG_EXPOLINE
+
+_LC_BR_R1 = __LC_BR_R1
+
+/*
+ * The expoline macros are used to create thunks in the same format
+ * as gcc generates them. The 'comdat' section flag makes sure that
+ * the various thunks are merged into a single copy.
+ */
+	.macro __THUNK_PROLOG_NAME name
+	.pushsection .text.\name,"axG",@progbits,\name,comdat
+	.globl \name
+	.hidden \name
+	.type \name,@function
+\name:
+	CFI_STARTPROC
+	.endm
+
+	.macro __THUNK_EPILOG
+	CFI_ENDPROC
+	.popsection
+	.endm
+
+	.macro __THUNK_PROLOG_BR r1,r2
+	__THUNK_PROLOG_NAME __s390x_indirect_jump_r\r2\()use_r\r1
+	.endm
+
+	.macro __THUNK_PROLOG_BC d0,r1,r2
+	__THUNK_PROLOG_NAME __s390x_indirect_branch_\d0\()_\r2\()use_\r1
+	.endm
+
+	.macro __THUNK_BR r1,r2
+	jg	__s390x_indirect_jump_r\r2\()use_r\r1
+	.endm
+
+	.macro __THUNK_BC d0,r1,r2
+	jg	__s390x_indirect_branch_\d0\()_\r2\()use_\r1
+	.endm
+
+	.macro __THUNK_BRASL r1,r2,r3
+	brasl	\r1,__s390x_indirect_jump_r\r3\()use_r\r2
+	.endm
+
+	.macro	__DECODE_RR expand,reg,ruse
+	.set __decode_fail,1
+	.irp r1,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
+	.ifc \reg,%r\r1
+	.irp r2,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
+	.ifc \ruse,%r\r2
+	\expand \r1,\r2
+	.set __decode_fail,0
+	.endif
+	.endr
+	.endif
+	.endr
+	.if __decode_fail == 1
+	.error "__DECODE_RR failed"
+	.endif
+	.endm
+
+	.macro	__DECODE_RRR expand,rsave,rtarget,ruse
+	.set __decode_fail,1
+	.irp r1,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
+	.ifc \rsave,%r\r1
+	.irp r2,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
+	.ifc \rtarget,%r\r2
+	.irp r3,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
+	.ifc \ruse,%r\r3
+	\expand \r1,\r2,\r3
+	.set __decode_fail,0
+	.endif
+	.endr
+	.endif
+	.endr
+	.endif
+	.endr
+	.if __decode_fail == 1
+	.error "__DECODE_RRR failed"
+	.endif
+	.endm
+
+	.macro	__DECODE_DRR expand,disp,reg,ruse
+	.set __decode_fail,1
+	.irp r1,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
+	.ifc \reg,%r\r1
+	.irp r2,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
+	.ifc \ruse,%r\r2
+	\expand \disp,\r1,\r2
+	.set __decode_fail,0
+	.endif
+	.endr
+	.endif
+	.endr
+	.if __decode_fail == 1
+	.error "__DECODE_DRR failed"
+	.endif
+	.endm
+
+	.macro __THUNK_EX_BR reg,ruse
+	# Be very careful when adding instructions to this macro!
+	# The ALTERNATIVE replacement code has a .+10 which targets
+	# the "br \reg" after the code has been patched.
+#ifdef CONFIG_HAVE_MARCH_Z10_FEATURES
+	exrl	0,555f
+	j	.
+#else
+	.ifc \reg,%r1
+	ALTERNATIVE "ex %r0,_LC_BR_R1", ".insn ril,0xc60000000000,0,.+10", 35
+	j	.
+	.else
+	larl	\ruse,555f
+	ex	0,0(\ruse)
+	j	.
+	.endif
+#endif
+555:	br	\reg
+	.endm
+
+	.macro __THUNK_EX_BC disp,reg,ruse
+#ifdef CONFIG_HAVE_MARCH_Z10_FEATURES
+	exrl	0,556f
+	j	.
+#else
+	larl	\ruse,556f
+	ex	0,0(\ruse)
+	j	.
+#endif
+556:	b	\disp(\reg)
+	.endm
+
+	.macro GEN_BR_THUNK reg,ruse=%r1
+	__DECODE_RR __THUNK_PROLOG_BR,\reg,\ruse
+	__THUNK_EX_BR \reg,\ruse
+	__THUNK_EPILOG
+	.endm
+
+	.macro GEN_B_THUNK disp,reg,ruse=%r1
+	__DECODE_DRR __THUNK_PROLOG_BC,\disp,\reg,\ruse
+	__THUNK_EX_BC \disp,\reg,\ruse
+	__THUNK_EPILOG
+	.endm
+
+	.macro BR_EX reg,ruse=%r1
+557:	__DECODE_RR __THUNK_BR,\reg,\ruse
+	.pushsection .s390_indirect_branches,"a",@progbits
+	.long	557b-.
+	.popsection
+	.endm
+
+	 .macro B_EX disp,reg,ruse=%r1
+558:	__DECODE_DRR __THUNK_BC,\disp,\reg,\ruse
+	.pushsection .s390_indirect_branches,"a",@progbits
+	.long	558b-.
+	.popsection
+	.endm
+
+	.macro BASR_EX rsave,rtarget,ruse=%r1
+559:	__DECODE_RRR __THUNK_BRASL,\rsave,\rtarget,\ruse
+	.pushsection .s390_indirect_branches,"a",@progbits
+	.long	559b-.
+	.popsection
+	.endm
+
+#else
+	.macro GEN_BR_THUNK reg,ruse=%r1
+	.endm
+
+	.macro GEN_B_THUNK disp,reg,ruse=%r1
+	.endm
+
+	 .macro BR_EX reg,ruse=%r1
+	br	\reg
+	.endm
+
+	 .macro B_EX disp,reg,ruse=%r1
+	b	\disp(\reg)
+	.endm
+
+	.macro BASR_EX rsave,rtarget,ruse=%r1
+	basr	\rsave,\rtarget
+	.endm
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_S390_NOSPEC_ASM_H */

arch/s390/include/asm/purgatory.h

@@ -13,5 +13,11 @@
 
 int verify_sha256_digest(void);
 
+extern u64 kernel_entry;
+extern u64 kernel_type;
+
+extern u64 crash_start;
+extern u64 crash_size;
+
 #endif	/* __ASSEMBLY__ */
 #endif /* _S390_PURGATORY_H_ */

arch/s390/kernel/Makefile

@@ -65,6 +65,7 @@ obj-y	+= nospec-branch.o
 
 extra-y				+= head.o head64.o vmlinux.lds
 
+obj-$(CONFIG_SYSFS)		+= nospec-sysfs.o
 CFLAGS_REMOVE_nospec-branch.o	+= $(CC_FLAGS_EXPOLINE)
 
 obj-$(CONFIG_MODULES)		+= module.o

arch/s390/kernel/asm-offsets.c

@@ -181,6 +181,7 @@ int main(void)
 	OFFSET(__LC_MACHINE_FLAGS, lowcore, machine_flags);
 	OFFSET(__LC_PREEMPT_COUNT, lowcore, preempt_count);
 	OFFSET(__LC_GMAP, lowcore, gmap);
+	OFFSET(__LC_BR_R1, lowcore, br_r1_trampoline);
 	/* software defined ABI-relevant lowcore locations 0xe00 - 0xe20 */
 	OFFSET(__LC_DUMP_REIPL, lowcore, ipib);
 	/* hardware defined lowcore locations 0x1000 - 0x18ff */

arch/s390/kernel/base.S

@@ -9,18 +9,22 @@
 
 #include <linux/linkage.h>
 #include <asm/asm-offsets.h>
+#include <asm/nospec-insn.h>
 #include <asm/ptrace.h>
 #include <asm/sigp.h>
 
+	GEN_BR_THUNK %r9
+	GEN_BR_THUNK %r14
+
 ENTRY(s390_base_mcck_handler)
 	basr	%r13,0
 0:	lg	%r15,__LC_PANIC_STACK	# load panic stack
 	aghi	%r15,-STACK_FRAME_OVERHEAD
 	larl	%r1,s390_base_mcck_handler_fn
-	lg	%r1,0(%r1)
-	ltgr	%r1,%r1
+	lg	%r9,0(%r1)
+	ltgr	%r9,%r9
 	jz	1f
-	basr	%r14,%r1
+	BASR_EX	%r14,%r9
 1:	la	%r1,4095
 	lmg	%r0,%r15,__LC_GPREGS_SAVE_AREA-4095(%r1)
 	lpswe	__LC_MCK_OLD_PSW
@@ -37,10 +41,10 @@ ENTRY(s390_base_ext_handler)
 	basr	%r13,0
 0:	aghi	%r15,-STACK_FRAME_OVERHEAD
 	larl	%r1,s390_base_ext_handler_fn
-	lg	%r1,0(%r1)
-	ltgr	%r1,%r1
+	lg	%r9,0(%r1)
+	ltgr	%r9,%r9
 	jz	1f
-	basr	%r14,%r1
+	BASR_EX	%r14,%r9
 1:	lmg	%r0,%r15,__LC_SAVE_AREA_ASYNC
 	ni	__LC_EXT_OLD_PSW+1,0xfd	# clear wait state bit
 	lpswe	__LC_EXT_OLD_PSW
@@ -57,10 +61,10 @@ ENTRY(s390_base_pgm_handler)
 	basr	%r13,0
 0:	aghi	%r15,-STACK_FRAME_OVERHEAD
 	larl	%r1,s390_base_pgm_handler_fn
-	lg	%r1,0(%r1)
-	ltgr	%r1,%r1
+	lg	%r9,0(%r1)
+	ltgr	%r9,%r9
 	jz	1f
-	basr	%r14,%r1
+	BASR_EX	%r14,%r9
 	lmg	%r0,%r15,__LC_SAVE_AREA_SYNC
 	lpswe	__LC_PGM_OLD_PSW
 1:	lpswe	disabled_wait_psw-0b(%r13)
@@ -117,7 +121,7 @@ ENTRY(diag308_reset)
 	larl	%r4,.Lcontinue_psw	# Restore PSW flags
 	lpswe	0(%r4)
 .Lcontinue:
-	br	%r14
+	BR_EX	%r14
 .align 16
 .Lrestart_psw:
 	.long	0x00080000,0x80000000 + .Lrestart_part2

arch/s390/kernel/entry.S

@@ -28,6 +28,7 @@
 #include <asm/setup.h>
 #include <asm/nmi.h>
 #include <asm/export.h>
+#include <asm/nospec-insn.h>
 
 __PT_R0      =	__PT_GPRS
 __PT_R1      =	__PT_GPRS + 8
@@ -183,67 +184,9 @@ _LPP_OFFSET	= __LC_LPP
 		    "jnz .+8; .long 0xb2e8d000", 82
 	.endm
 
-#ifdef CONFIG_EXPOLINE
-
-	.macro GEN_BR_THUNK name,reg,tmp
-	.section .text.\name,"axG",@progbits,\name,comdat
-	.globl \name
-	.hidden \name
-	.type \name,@function
-\name:
-	CFI_STARTPROC
-#ifdef CONFIG_HAVE_MARCH_Z10_FEATURES
-	exrl	0,0f
-#else
-	larl	\tmp,0f
-	ex	0,0(\tmp)
-#endif
-	j	.
-0:	br	\reg
-	CFI_ENDPROC
-	.endm
-
-	GEN_BR_THUNK __s390x_indirect_jump_r1use_r9,%r9,%r1
-	GEN_BR_THUNK __s390x_indirect_jump_r1use_r14,%r14,%r1
-	GEN_BR_THUNK __s390x_indirect_jump_r11use_r14,%r14,%r11
-
-	.macro BASR_R14_R9
-0:	brasl	%r14,__s390x_indirect_jump_r1use_r9
-	.pushsection .s390_indirect_branches,"a",@progbits
-	.long	0b-.
-	.popsection
-	.endm
-
-	.macro BR_R1USE_R14
-0:	jg	__s390x_indirect_jump_r1use_r14
-	.pushsection .s390_indirect_branches,"a",@progbits
-	.long	0b-.
-	.popsection
-	.endm
-
-	.macro BR_R11USE_R14
-0:	jg	__s390x_indirect_jump_r11use_r14
-	.pushsection .s390_indirect_branches,"a",@progbits
-	.long	0b-.
-	.popsection
-	.endm
-
-#else	/* CONFIG_EXPOLINE */
-
-	.macro BASR_R14_R9
-	basr	%r14,%r9
-	.endm
-
-	.macro BR_R1USE_R14
-	br	%r14
-	.endm
-
-	.macro BR_R11USE_R14
-	br	%r14
-	.endm
-
-#endif /* CONFIG_EXPOLINE */
-
+	GEN_BR_THUNK %r9
+	GEN_BR_THUNK %r14
+	GEN_BR_THUNK %r14,%r11
 
 	.section .kprobes.text, "ax"
 .Ldummy:
@@ -260,7 +203,7 @@ _LPP_OFFSET	= __LC_LPP
 ENTRY(__bpon)
 	.globl __bpon
 	BPON
-	BR_R1USE_R14
+	BR_EX	%r14
 
 /*
  * Scheduler resume function, called by switch_to
@@ -284,7 +227,7 @@ ENTRY(__switch_to)
 	mvc	__LC_CURRENT_PID(4,%r0),0(%r3)	# store pid of next
 	lmg	%r6,%r15,__SF_GPRS(%r15)	# load gprs of next task
 	ALTERNATIVE "", ".insn s,0xb2800000,_LPP_OFFSET", 40
-	BR_R1USE_R14
+	BR_EX	%r14
 
 .L__critical_start:
 
@@ -351,7 +294,7 @@ sie_exit:
 	xgr	%r5,%r5
 	lmg	%r6,%r14,__SF_GPRS(%r15)	# restore kernel registers
 	lg	%r2,__SF_SIE_REASON(%r15)	# return exit reason code
-	BR_R1USE_R14
+	BR_EX	%r14
 .Lsie_fault:
 	lghi	%r14,-EFAULT
 	stg	%r14,__SF_SIE_REASON(%r15)	# set exit reason code
@@ -410,7 +353,7 @@ ENTRY(system_call)
 	lgf	%r9,0(%r8,%r10)			# get system call add.
 	TSTMSK	__TI_flags(%r12),_TIF_TRACE
 	jnz	.Lsysc_tracesys
-	BASR_R14_R9				# call sys_xxxx
+	BASR_EX	%r14,%r9			# call sys_xxxx
 	stg	%r2,__PT_R2(%r11)		# store return value
 
 .Lsysc_return:
@@ -595,7 +538,7 @@ ENTRY(system_call)
 	lmg	%r3,%r7,__PT_R3(%r11)
 	stg	%r7,STACK_FRAME_OVERHEAD(%r15)
 	lg	%r2,__PT_ORIG_GPR2(%r11)
-	BASR_R14_R9			# call sys_xxx
+	BASR_EX	%r14,%r9		# call sys_xxx
 	stg	%r2,__PT_R2(%r11)	# store return value
 .Lsysc_tracenogo:
 	TSTMSK	__TI_flags(%r12),_TIF_TRACE
@@ -619,7 +562,7 @@ ENTRY(ret_from_fork)
 	lmg	%r9,%r10,__PT_R9(%r11)	# load gprs
 ENTRY(kernel_thread_starter)
 	la	%r2,0(%r10)
-	BASR_R14_R9
+	BASR_EX	%r14,%r9
 	j	.Lsysc_tracenogo
 
 /*
@@ -701,7 +644,7 @@ ENTRY(pgm_check_handler)
 	je	.Lpgm_return
 	lgf	%r9,0(%r10,%r1)		# load address of handler routine
 	lgr	%r2,%r11		# pass pointer to pt_regs
-	BASR_R14_R9			# branch to interrupt-handler
+	BASR_EX	%r14,%r9		# branch to interrupt-handler
 .Lpgm_return:
 	LOCKDEP_SYS_EXIT
 	tm	__PT_PSW+1(%r11),0x01	# returning to user ?
@@ -1019,7 +962,7 @@ ENTRY(psw_idle)
 	stpt	__TIMER_IDLE_ENTER(%r2)
 .Lpsw_idle_lpsw:
 	lpswe	__SF_EMPTY(%r15)
-	BR_R1USE_R14
+	BR_EX	%r14
 .Lpsw_idle_end:
 
 /*
@@ -1061,7 +1004,7 @@ ENTRY(save_fpu_regs)
 .Lsave_fpu_regs_done:
 	oi	__LC_CPU_FLAGS+7,_CIF_FPU
 .Lsave_fpu_regs_exit:
-	BR_R1USE_R14
+	BR_EX	%r14
 .Lsave_fpu_regs_end:
 EXPORT_SYMBOL(save_fpu_regs)
 
@@ -1107,7 +1050,7 @@ load_fpu_regs:
 .Lload_fpu_regs_done:
 	ni	__LC_CPU_FLAGS+7,255-_CIF_FPU
 .Lload_fpu_regs_exit:
-	BR_R1USE_R14
+	BR_EX	%r14
 .Lload_fpu_regs_end:
 
 .L__critical_end:
@@ -1322,7 +1265,7 @@ cleanup_critical:
 	jl	0f
 	clg	%r9,BASED(.Lcleanup_table+104)	# .Lload_fpu_regs_end
 	jl	.Lcleanup_load_fpu_regs
-0:	BR_R11USE_R14
+0:	BR_EX	%r14
 
 	.align	8
 .Lcleanup_table:
@@ -1358,7 +1301,7 @@ cleanup_critical:
 	ni	__SIE_PROG0C+3(%r9),0xfe	# no longer in SIE
 	lctlg	%c1,%c1,__LC_USER_ASCE		# load primary asce
 	larl	%r9,sie_exit			# skip forward to sie_exit
-	BR_R11USE_R14
+	BR_EX	%r14
 #endif
 
 .Lcleanup_system_call:
@@ -1412,7 +1355,7 @@ cleanup_critical:
 	stg	%r15,56(%r11)		# r15 stack pointer
 	# set new psw address and exit
 	larl	%r9,.Lsysc_do_svc
-	BR_R11USE_R14
+	BR_EX	%r14,%r11
 .Lcleanup_system_call_insn:
 	.quad	system_call
 	.quad	.Lsysc_stmg
@@ -1424,7 +1367,7 @@ cleanup_critical:
 
 .Lcleanup_sysc_tif:
 	larl	%r9,.Lsysc_tif
-	BR_R11USE_R14
+	BR_EX	%r14,%r11
 
 .Lcleanup_sysc_restore:
 	# check if stpt has been executed
@@ -1441,14 +1384,14 @@ cleanup_critical:
 	mvc	0(64,%r11),__PT_R8(%r9)
 	lmg	%r0,%r7,__PT_R0(%r9)
 1:	lmg	%r8,%r9,__LC_RETURN_PSW
-	BR_R11USE_R14
+	BR_EX	%r14,%r11
 .Lcleanup_sysc_restore_insn:
 	.quad	.Lsysc_exit_timer
 	.quad	.Lsysc_done - 4
 
 .Lcleanup_io_tif:
 	larl	%r9,.Lio_tif
-	BR_R11USE_R14
+	BR_EX	%r14,%r11
 
 .Lcleanup_io_restore:
 	# check if stpt has been executed
@@ -1462,7 +1405,7 @@ cleanup_critical:
 	mvc	0(64,%r11),__PT_R8(%r9)
 	lmg	%r0,%r7,__PT_R0(%r9)
 1:	lmg	%r8,%r9,__LC_RETURN_PSW
-	BR_R11USE_R14
+	BR_EX	%r14,%r11
 .Lcleanup_io_restore_insn:
 	.quad	.Lio_exit_timer
 	.quad	.Lio_done - 4
@@ -1515,17 +1458,17 @@ cleanup_critical:
 	# prepare return psw
 	nihh	%r8,0xfcfd		# clear irq & wait state bits
 	lg	%r9,48(%r11)		# return from psw_idle
-	BR_R11USE_R14
+	BR_EX	%r14,%r11
 .Lcleanup_idle_insn:
 	.quad	.Lpsw_idle_lpsw
 
 .Lcleanup_save_fpu_regs:
 	larl	%r9,save_fpu_regs
-	BR_R11USE_R14
+	BR_EX	%r14,%r11
 
 .Lcleanup_load_fpu_regs:
 	larl	%r9,load_fpu_regs
-	BR_R11USE_R14
+	BR_EX	%r14,%r11
 
 /*
  * Integer constants

arch/s390/kernel/irq.c

@@ -176,10 +176,9 @@ void do_softirq_own_stack(void)
 		new -= STACK_FRAME_OVERHEAD;
 		((struct stack_frame *) new)->back_chain = old;
 		asm volatile("   la    15,0(%0)\n"
-			     "   basr  14,%2\n"
+			     "   brasl 14,__do_softirq\n"
 			     "   la    15,0(%1)\n"
-			     : : "a" (new), "a" (old),
-			         "a" (__do_softirq)
+			     : : "a" (new), "a" (old)
 			     : "0", "1", "2", "3", "4", "5", "14",
 			       "cc", "memory" );
 	} else {

arch/s390/kernel/mcount.S

@@ -9,13 +9,17 @@
 #include <linux/linkage.h>
 #include <asm/asm-offsets.h>
 #include <asm/ftrace.h>
+#include <asm/nospec-insn.h>
 #include <asm/ptrace.h>
 #include <asm/export.h>
 
+	GEN_BR_THUNK %r1
+	GEN_BR_THUNK %r14
+
 	.section .kprobes.text, "ax"
 
 ENTRY(ftrace_stub)
-	br	%r14
+	BR_EX	%r14
 
 #define STACK_FRAME_SIZE  (STACK_FRAME_OVERHEAD + __PT_SIZE)
 #define STACK_PTREGS	  (STACK_FRAME_OVERHEAD)
@@ -23,7 +27,7 @@ ENTRY(ftrace_stub)
 #define STACK_PTREGS_PSW  (STACK_PTREGS + __PT_PSW)
 
 ENTRY(_mcount)
-	br	%r14
+	BR_EX	%r14
 
 EXPORT_SYMBOL(_mcount)
 
@@ -53,7 +57,7 @@ ENTRY(ftrace_caller)
 #endif
 	lgr	%r3,%r14
 	la	%r5,STACK_PTREGS(%r15)
-	basr	%r14,%r1
+	BASR_EX	%r14,%r1
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 # The j instruction gets runtime patched to a nop instruction.
 # See ftrace_enable_ftrace_graph_caller.
@@ -68,7 +72,7 @@ ftrace_graph_caller_end:
 #endif
 	lg	%r1,(STACK_PTREGS_PSW+8)(%r15)
 	lmg	%r2,%r15,(STACK_PTREGS_GPRS+2*8)(%r15)
-	br	%r1
+	BR_EX	%r1
 
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 
@@ -81,6 +85,6 @@ ENTRY(return_to_handler)
 	aghi	%r15,STACK_FRAME_OVERHEAD
 	lgr	%r14,%r2
 	lmg	%r2,%r5,32(%r15)
-	br	%r14
+	BR_EX	%r14
 
 #endif

arch/s390/kernel/nospec-branch.c

@@ -1,7 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 #include <linux/module.h>
 #include <linux/device.h>
-#include <linux/cpu.h>
 #include <asm/nospec-branch.h>
 
 static int __init nobp_setup_early(char *str)
@@ -44,24 +43,6 @@ static int __init nospec_report(void)
 }
 arch_initcall(nospec_report);
 
-#ifdef CONFIG_SYSFS
-ssize_t cpu_show_spectre_v1(struct device *dev,
-			    struct device_attribute *attr, char *buf)
-{
-	return sprintf(buf, "Mitigation: __user pointer sanitization\n");
-}
-
-ssize_t cpu_show_spectre_v2(struct device *dev,
-			    struct device_attribute *attr, char *buf)
-{
-	if (IS_ENABLED(CC_USING_EXPOLINE) && !nospec_disable)
-		return sprintf(buf, "Mitigation: execute trampolines\n");
-	if (__test_facility(82, S390_lowcore.alt_stfle_fac_list))
-		return sprintf(buf, "Mitigation: limited branch prediction.\n");
-	return sprintf(buf, "Vulnerable\n");
-}
-#endif
-
 #ifdef CONFIG_EXPOLINE
 
 int nospec_disable = IS_ENABLED(CONFIG_EXPOLINE_OFF);
@@ -112,7 +93,6 @@ static void __init_or_module __nospec_revert(s32 *start, s32 *end)
 	s32 *epo;
 
 	/* Second part of the instruction replace is always a nop */
-	memcpy(insnbuf + 2, (char[]) { 0x47, 0x00, 0x00, 0x00 }, 4);
 	for (epo = start; epo < end; epo++) {
 		instr = (u8 *) epo + *epo;
 		if (instr[0] == 0xc0 && (instr[1] & 0x0f) == 0x04)
@@ -133,18 +113,34 @@ static void __init_or_module __nospec_revert(s32 *start, s32 *end)
 			br = thunk + (*(int *)(thunk + 2)) * 2;
 		else
 			continue;
-		if (br[0] != 0x07 || (br[1] & 0xf0) != 0xf0)
+		/* Check for unconditional branch 0x07f? or 0x47f???? */
+		if ((br[0] & 0xbf) != 0x07 || (br[1] & 0xf0) != 0xf0)
 			continue;
+
+		memcpy(insnbuf + 2, (char[]) { 0x47, 0x00, 0x07, 0x00 }, 4);
 		switch (type) {
 		case BRCL_EXPOLINE:
-			/* brcl to thunk, replace with br + nop */
 			insnbuf[0] = br[0];
 			insnbuf[1] = (instr[1] & 0xf0) | (br[1] & 0x0f);
+			if (br[0] == 0x47) {
+				/* brcl to b, replace with bc + nopr */
+				insnbuf[2] = br[2];
+				insnbuf[3] = br[3];
+			} else {
+				/* brcl to br, replace with bcr + nop */
+			}
 			break;
 		case BRASL_EXPOLINE:
-			/* brasl to thunk, replace with basr + nop */
-			insnbuf[0] = 0x0d;
 			insnbuf[1] = (instr[1] & 0xf0) | (br[1] & 0x0f);
+			if (br[0] == 0x47) {
+				/* brasl to b, replace with bas + nopr */
+				insnbuf[0] = 0x4d;
+				insnbuf[2] = br[2];
+				insnbuf[3] = br[3];
+			} else {
+				/* brasl to br, replace with basr + nop */
+				insnbuf[0] = 0x0d;
+			}
 			break;
 		}
 

arch/s390/kernel/nospec-sysfs.c

@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/device.h>
+#include <linux/cpu.h>
+#include <asm/facility.h>
+#include <asm/nospec-branch.h>
+
+ssize_t cpu_show_spectre_v1(struct device *dev,
+			    struct device_attribute *attr, char *buf)
+{
+	return sprintf(buf, "Mitigation: __user pointer sanitization\n");
+}
+
+ssize_t cpu_show_spectre_v2(struct device *dev,
+			    struct device_attribute *attr, char *buf)
+{
+	if (IS_ENABLED(CC_USING_EXPOLINE) && !nospec_disable)
+		return sprintf(buf, "Mitigation: execute trampolines\n");
+	if (__test_facility(82, S390_lowcore.alt_stfle_fac_list))
+		return sprintf(buf, "Mitigation: limited branch prediction\n");
+	return sprintf(buf, "Vulnerable\n");
+}

arch/s390/kernel/perf_cpum_sf.c

@@ -753,6 +753,10 @@ static int __hw_perf_event_init(struct perf_event *event)
 	 */
 	rate = 0;
 	if (attr->freq) {
+		if (!attr->sample_freq) {
+			err = -EINVAL;
+			goto out;
+		}
 		rate = freq_to_sample_rate(&si, attr->sample_freq);
 		rate = hw_limit_rate(&si, rate);
 		attr->freq = 0;

arch/s390/kernel/reipl.S

@@ -7,8 +7,11 @@
 
 #include <linux/linkage.h>
 #include <asm/asm-offsets.h>
+#include <asm/nospec-insn.h>
 #include <asm/sigp.h>
 
+	GEN_BR_THUNK %r9
+
 #
 # Issue "store status" for the current CPU to its prefix page
 # and call passed function afterwards
@@ -67,9 +70,9 @@ ENTRY(store_status)
 	st	%r4,0(%r1)
 	st	%r5,4(%r1)
 	stg	%r2,8(%r1)
-	lgr	%r1,%r2
+	lgr	%r9,%r2
 	lgr	%r2,%r3
-	br	%r1
+	BR_EX	%r9
 
 	.section .bss
 	.align	8

arch/s390/kernel/swsusp.S

@@ -13,6 +13,7 @@
 #include <asm/ptrace.h>
 #include <asm/thread_info.h>
 #include <asm/asm-offsets.h>
+#include <asm/nospec-insn.h>
 #include <asm/sigp.h>
 
 /*
@@ -24,6 +25,8 @@
  * (see below) in the resume process.
  * This function runs with disabled interrupts.
  */
+	GEN_BR_THUNK %r14
+
 	.section .text
 ENTRY(swsusp_arch_suspend)
 	stmg	%r6,%r15,__SF_GPRS(%r15)
@@ -103,7 +106,7 @@ ENTRY(swsusp_arch_suspend)
 	spx	0x318(%r1)
 	lmg	%r6,%r15,STACK_FRAME_OVERHEAD + __SF_GPRS(%r15)
 	lghi	%r2,0
-	br	%r14
+	BR_EX	%r14
 
 /*
  * Restore saved memory image to correct place and restore register context.
@@ -197,11 +200,10 @@ pgm_check_entry:
 	larl	%r15,init_thread_union
 	ahi	%r15,1<<(PAGE_SHIFT+THREAD_SIZE_ORDER)
 	larl	%r2,.Lpanic_string
-	larl	%r3,sclp_early_printk
 	lghi	%r1,0
 	sam31
 	sigp	%r1,%r0,SIGP_SET_ARCHITECTURE
-	basr	%r14,%r3
+	brasl	%r14,sclp_early_printk
 	larl	%r3,.Ldisabled_wait_31
 	lpsw	0(%r3)
 4:
@@ -267,7 +269,7 @@ restore_registers:
 	/* Return 0 */
 	lmg	%r6,%r15,STACK_FRAME_OVERHEAD + __SF_GPRS(%r15)
 	lghi	%r2,0
-	br	%r14
+	BR_EX	%r14
 
 	.section .data..nosave,"aw",@progbits
 	.align	8

arch/s390/lib/mem.S

@@ -7,6 +7,9 @@
 
 #include <linux/linkage.h>
 #include <asm/export.h>
+#include <asm/nospec-insn.h>
+
+	GEN_BR_THUNK %r14
 
 /*
  * void *memmove(void *dest, const void *src, size_t n)
@@ -33,14 +36,14 @@ ENTRY(memmove)
 .Lmemmove_forward_remainder:
 	larl	%r5,.Lmemmove_mvc
 	ex	%r4,0(%r5)
-	br	%r14
+	BR_EX	%r14
 .Lmemmove_reverse:
 	ic	%r0,0(%r4,%r3)
 	stc	%r0,0(%r4,%r1)
 	brctg	%r4,.Lmemmove_reverse
 	ic	%r0,0(%r4,%r3)
 	stc	%r0,0(%r4,%r1)
-	br	%r14
+	BR_EX	%r14
 .Lmemmove_mvc:
 	mvc	0(1,%r1),0(%r3)
 EXPORT_SYMBOL(memmove)
@@ -77,7 +80,7 @@ ENTRY(memset)
 .Lmemset_clear_remainder:
 	larl	%r3,.Lmemset_xc
 	ex	%r4,0(%r3)
-	br	%r14
+	BR_EX	%r14
 .Lmemset_fill:
 	cghi	%r4,1
 	lgr	%r1,%r2
@@ -95,10 +98,10 @@ ENTRY(memset)
 	stc	%r3,0(%r1)
 	larl	%r5,.Lmemset_mvc
 	ex	%r4,0(%r5)
-	br	%r14
+	BR_EX	%r14
 .Lmemset_fill_exit:
 	stc	%r3,0(%r1)
-	br	%r14
+	BR_EX	%r14
 .Lmemset_xc:
 	xc	0(1,%r1),0(%r1)
 .Lmemset_mvc:
@@ -121,7 +124,7 @@ ENTRY(memcpy)
 .Lmemcpy_remainder:
 	larl	%r5,.Lmemcpy_mvc
 	ex	%r4,0(%r5)
-	br	%r14
+	BR_EX	%r14
 .Lmemcpy_loop:
 	mvc	0(256,%r1),0(%r3)
 	la	%r1,256(%r1)
@@ -159,10 +162,10 @@ ENTRY(__memset\bits)
 	\insn	%r3,0(%r1)
 	larl	%r5,.L__memset_mvc\bits
 	ex	%r4,0(%r5)
-	br	%r14
+	BR_EX	%r14
 .L__memset_exit\bits:
 	\insn	%r3,0(%r2)
-	br	%r14
+	BR_EX	%r14
 .L__memset_mvc\bits:
 	mvc	\bytes(1,%r1),0(%r1)
 .endm

arch/s390/net/bpf_jit.S

@@ -9,6 +9,7 @@
  */
 
 #include <linux/linkage.h>
+#include <asm/nospec-insn.h>
 #include "bpf_jit.h"
 
 /*
@@ -54,7 +55,7 @@ ENTRY(sk_load_##NAME##_pos);						\
 	clg	%r3,STK_OFF_HLEN(%r15);	/* Offset + SIZE > hlen? */	\
 	jh	sk_load_##NAME##_slow;					\
 	LOAD	%r14,-SIZE(%r3,%r12);	/* Get data from skb */		\
-	b	OFF_OK(%r6);		/* Return */			\
+	B_EX	OFF_OK,%r6;		/* Return */			\
 									\
 sk_load_##NAME##_slow:;							\
 	lgr	%r2,%r7;		/* Arg1 = skb pointer */	\
@@ -64,11 +65,14 @@ sk_load_##NAME##_slow:;							\
 	brasl	%r14,skb_copy_bits;	/* Get data from skb */		\
 	LOAD	%r14,STK_OFF_TMP(%r15);	/* Load from temp bufffer */	\
 	ltgr	%r2,%r2;		/* Set cc to (%r2 != 0) */	\
-	br	%r6;			/* Return */
+	BR_EX	%r6;			/* Return */
 
 sk_load_common(word, 4, llgf)	/* r14 = *(u32 *) (skb->data+offset) */
 sk_load_common(half, 2, llgh)	/* r14 = *(u16 *) (skb->data+offset) */
 
+	GEN_BR_THUNK %r6
+	GEN_B_THUNK OFF_OK,%r6
+
 /*
  * Load 1 byte from SKB (optimized version)
  */
@@ -80,7 +84,7 @@ ENTRY(sk_load_byte_pos)
 	clg	%r3,STK_OFF_HLEN(%r15)	# Offset >= hlen?
 	jnl	sk_load_byte_slow
 	llgc	%r14,0(%r3,%r12)	# Get byte from skb
-	b	OFF_OK(%r6)		# Return OK
+	B_EX	OFF_OK,%r6		# Return OK
 
 sk_load_byte_slow:
 	lgr	%r2,%r7			# Arg1 = skb pointer
@@ -90,7 +94,7 @@ sk_load_byte_slow:
 	brasl	%r14,skb_copy_bits	# Get data from skb
 	llgc	%r14,STK_OFF_TMP(%r15)	# Load result from temp buffer
 	ltgr	%r2,%r2			# Set cc to (%r2 != 0)
-	br	%r6			# Return cc
+	BR_EX	%r6			# Return cc
 
 #define sk_negative_common(NAME, SIZE, LOAD)				\
 sk_load_##NAME##_slow_neg:;						\
@@ -104,7 +108,7 @@ sk_load_##NAME##_slow_neg:;						\
 	jz	bpf_error;						\
 	LOAD	%r14,0(%r2);		/* Get data from pointer */	\
 	xr	%r3,%r3;		/* Set cc to zero */		\
-	br	%r6;			/* Return cc */
+	BR_EX	%r6;			/* Return cc */
 
 sk_negative_common(word, 4, llgf)
 sk_negative_common(half, 2, llgh)
@@ -113,4 +117,4 @@ sk_negative_common(byte, 1, llgc)
 bpf_error:
 # force a return 0 from jit handler
 	ltgr	%r15,%r15	# Set condition code
-	br	%r6
+	BR_EX	%r6

arch/s390/net/bpf_jit_comp.c

@@ -25,6 +25,8 @@
 #include <linux/bpf.h>
 #include <asm/cacheflush.h>
 #include <asm/dis.h>
+#include <asm/facility.h>
+#include <asm/nospec-branch.h>
 #include <asm/set_memory.h>
 #include "bpf_jit.h"
 
@@ -41,6 +43,8 @@ struct bpf_jit {
 	int base_ip;		/* Base address for literal pool */
 	int ret0_ip;		/* Address of return 0 */
 	int exit_ip;		/* Address of exit */
+	int r1_thunk_ip;	/* Address of expoline thunk for 'br %r1' */
+	int r14_thunk_ip;	/* Address of expoline thunk for 'br %r14' */
 	int tail_call_start;	/* Tail call start offset */
 	int labels[1];		/* Labels for local jumps */
 };
@@ -250,6 +254,19 @@ static inline void reg_set_seen(struct bpf_jit *jit, u32 b1)
 	REG_SET_SEEN(b2);					\
 })
 
+#define EMIT6_PCREL_RILB(op, b, target)				\
+({								\
+	int rel = (target - jit->prg) / 2;			\
+	_EMIT6(op | reg_high(b) << 16 | rel >> 16, rel & 0xffff);	\
+	REG_SET_SEEN(b);					\
+})
+
+#define EMIT6_PCREL_RIL(op, target)				\
+({								\
+	int rel = (target - jit->prg) / 2;			\
+	_EMIT6(op | rel >> 16, rel & 0xffff);			\
+})
+
 #define _EMIT6_IMM(op, imm)					\
 ({								\
 	unsigned int __imm = (imm);				\
@@ -469,8 +486,45 @@ static void bpf_jit_epilogue(struct bpf_jit *jit, u32 stack_depth)
 	EMIT4(0xb9040000, REG_2, BPF_REG_0);
 	/* Restore registers */
 	save_restore_regs(jit, REGS_RESTORE, stack_depth);
+	if (IS_ENABLED(CC_USING_EXPOLINE) && !nospec_disable) {
+		jit->r14_thunk_ip = jit->prg;
+		/* Generate __s390_indirect_jump_r14 thunk */
+		if (test_facility(35)) {
+			/* exrl %r0,.+10 */
+			EMIT6_PCREL_RIL(0xc6000000, jit->prg + 10);
+		} else {
+			/* larl %r1,.+14 */
+			EMIT6_PCREL_RILB(0xc0000000, REG_1, jit->prg + 14);
+			/* ex 0,0(%r1) */
+			EMIT4_DISP(0x44000000, REG_0, REG_1, 0);
+		}
+		/* j . */
+		EMIT4_PCREL(0xa7f40000, 0);
+	}
 	/* br %r14 */
 	_EMIT2(0x07fe);
+
+	if (IS_ENABLED(CC_USING_EXPOLINE) && !nospec_disable &&
+	    (jit->seen & SEEN_FUNC)) {
+		jit->r1_thunk_ip = jit->prg;
+		/* Generate __s390_indirect_jump_r1 thunk */
+		if (test_facility(35)) {
+			/* exrl %r0,.+10 */
+			EMIT6_PCREL_RIL(0xc6000000, jit->prg + 10);
+			/* j . */
+			EMIT4_PCREL(0xa7f40000, 0);
+			/* br %r1 */
+			_EMIT2(0x07f1);
+		} else {
+			/* larl %r1,.+14 */
+			EMIT6_PCREL_RILB(0xc0000000, REG_1, jit->prg + 14);
+			/* ex 0,S390_lowcore.br_r1_tampoline */
+			EMIT4_DISP(0x44000000, REG_0, REG_0,
+				   offsetof(struct lowcore, br_r1_trampoline));
+			/* j . */
+			EMIT4_PCREL(0xa7f40000, 0);
+		}
+	}
 }
 
 /*
@@ -966,8 +1020,13 @@ static noinline int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp, int i
 		/* lg %w1,<d(imm)>(%l) */
 		EMIT6_DISP_LH(0xe3000000, 0x0004, REG_W1, REG_0, REG_L,
 			      EMIT_CONST_U64(func));
-		/* basr %r14,%w1 */
-		EMIT2(0x0d00, REG_14, REG_W1);
+		if (IS_ENABLED(CC_USING_EXPOLINE) && !nospec_disable) {
+			/* brasl %r14,__s390_indirect_jump_r1 */
+			EMIT6_PCREL_RILB(0xc0050000, REG_14, jit->r1_thunk_ip);
+		} else {
+			/* basr %r14,%w1 */
+			EMIT2(0x0d00, REG_14, REG_W1);
+		}
 		/* lgr %b0,%r2: load return value into %b0 */
 		EMIT4(0xb9040000, BPF_REG_0, REG_2);
 		if ((jit->seen & SEEN_SKB) &&

arch/sh/Kconfig

@@ -9,6 +9,7 @@ config SUPERH
 	select HAVE_IDE if HAS_IOPORT_MAP
 	select HAVE_MEMBLOCK
 	select HAVE_MEMBLOCK_NODE_MAP
+	select NO_BOOTMEM
 	select ARCH_DISCARD_MEMBLOCK
 	select HAVE_OPROFILE
 	select HAVE_GENERIC_DMA_COHERENT

arch/sh/kernel/cpu/sh2/probe.c

@@ -43,7 +43,11 @@ void __ref cpu_probe(void)
 #endif
 
 #if defined(CONFIG_CPU_J2)
+#if defined(CONFIG_SMP)
 	unsigned cpu = hard_smp_processor_id();
+#else
+	unsigned cpu = 0;
+#endif
 	if (cpu == 0) of_scan_flat_dt(scan_cache, NULL);
 	if (j2_ccr_base) __raw_writel(0x80000303, j2_ccr_base + 4*cpu);
 	if (cpu != 0) return;

arch/sh/kernel/setup.c

@@ -11,7 +11,6 @@
 #include <linux/ioport.h>
 #include <linux/init.h>
 #include <linux/initrd.h>
-#include <linux/bootmem.h>
 #include <linux/console.h>
 #include <linux/root_dev.h>
 #include <linux/utsname.h>

arch/sh/mm/consistent.c

@@ -59,7 +59,9 @@ void *dma_generic_alloc_coherent(struct device *dev, size_t size,
 
 	split_page(pfn_to_page(virt_to_phys(ret) >> PAGE_SHIFT), order);
 
-	*dma_handle = virt_to_phys(ret) - PFN_PHYS(dev->dma_pfn_offset);
+	*dma_handle = virt_to_phys(ret);
+	if (!WARN_ON(!dev))
+		*dma_handle -= PFN_PHYS(dev->dma_pfn_offset);
 
 	return ret_nocache;
 }
@@ -69,9 +71,12 @@ void dma_generic_free_coherent(struct device *dev, size_t size,
 			       unsigned long attrs)
 {
 	int order = get_order(size);
-	unsigned long pfn = (dma_handle >> PAGE_SHIFT) + dev->dma_pfn_offset;
+	unsigned long pfn = dma_handle >> PAGE_SHIFT;
 	int k;
 
+	if (!WARN_ON(!dev))
+		pfn += dev->dma_pfn_offset;
+
 	for (k = 0; k < (1 << order); k++)
 		__free_pages(pfn_to_page(pfn + k), 0);
 
@@ -143,7 +148,7 @@ int __init platform_resource_setup_memory(struct platform_device *pdev,
 	if (!memsize)
 		return 0;
 
-	buf = dma_alloc_coherent(NULL, memsize, &dma_handle, GFP_KERNEL);
+	buf = dma_alloc_coherent(&pdev->dev, memsize, &dma_handle, GFP_KERNEL);
 	if (!buf) {
 		pr_warning("%s: unable to allocate memory\n", name);
 		return -ENOMEM;

arch/sh/mm/init.c

@@ -211,59 +211,15 @@ void __init allocate_pgdat(unsigned int nid)
 
 	NODE_DATA(nid) = __va(phys);
 	memset(NODE_DATA(nid), 0, sizeof(struct pglist_data));
-
-	NODE_DATA(nid)->bdata = &bootmem_node_data[nid];
 #endif
 
 	NODE_DATA(nid)->node_start_pfn = start_pfn;
 	NODE_DATA(nid)->node_spanned_pages = end_pfn - start_pfn;
 }
 
-static void __init bootmem_init_one_node(unsigned int nid)
-{
-	unsigned long total_pages, paddr;
-	unsigned long end_pfn;
-	struct pglist_data *p;
-
-	p = NODE_DATA(nid);
-
-	/* Nothing to do.. */
-	if (!p->node_spanned_pages)
-		return;
-
-	end_pfn = pgdat_end_pfn(p);
-
-	total_pages = bootmem_bootmap_pages(p->node_spanned_pages);
-
-	paddr = memblock_alloc(total_pages << PAGE_SHIFT, PAGE_SIZE);
-	if (!paddr)
-		panic("Can't allocate bootmap for nid[%d]\n", nid);
-
-	init_bootmem_node(p, paddr >> PAGE_SHIFT, p->node_start_pfn, end_pfn);
-
-	free_bootmem_with_active_regions(nid, end_pfn);
-
-	/*
-	 * XXX Handle initial reservations for the system memory node
-	 * only for the moment, we'll refactor this later for handling
-	 * reservations in other nodes.
-	 */
-	if (nid == 0) {
-		struct memblock_region *reg;
-
-		/* Reserve the sections we're already using. */
-		for_each_memblock(reserved, reg) {
-			reserve_bootmem(reg->base, reg->size, BOOTMEM_DEFAULT);
-		}
-	}
-
-	sparse_memory_present_with_active_regions(nid);
-}
-
 static void __init do_init_bootmem(void)
 {
 	struct memblock_region *reg;
-	int i;
 
 	/* Add active regions with valid PFNs. */
 	for_each_memblock(memory, reg) {
@@ -279,9 +235,12 @@ static void __init do_init_bootmem(void)
 
 	plat_mem_setup();
 
-	for_each_online_node(i)
-		bootmem_init_one_node(i);
+	for_each_memblock(memory, reg) {
+		int nid = memblock_get_region_node(reg);
 
+		memory_present(nid, memblock_region_memory_base_pfn(reg),
+			memblock_region_memory_end_pfn(reg));
+	}
 	sparse_init();
 }
 
@@ -322,7 +281,6 @@ void __init paging_init(void)
 {
 	unsigned long max_zone_pfns[MAX_NR_ZONES];
 	unsigned long vaddr, end;
-	int nid;
 
 	sh_mv.mv_mem_init();
 
@@ -377,21 +335,7 @@ void __init paging_init(void)
 	kmap_coherent_init();
 
 	memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
-
-	for_each_online_node(nid) {
-		pg_data_t *pgdat = NODE_DATA(nid);
-		unsigned long low, start_pfn;
-
-		start_pfn = pgdat->bdata->node_min_pfn;
-		low = pgdat->bdata->node_low_pfn;
-
-		if (max_zone_pfns[ZONE_NORMAL] < low)
-			max_zone_pfns[ZONE_NORMAL] = low;
-
-		printk("Node %u: start_pfn = 0x%lx, low = 0x%lx\n",
-		       nid, start_pfn, low);
-	}
-
+	max_zone_pfns[ZONE_NORMAL] = max_low_pfn;
 	free_area_init_nodes(max_zone_pfns);
 }
 

arch/sh/mm/numa.c

@@ -8,7 +8,6 @@
  * for more details.
  */
 #include <linux/module.h>
-#include <linux/bootmem.h>
 #include <linux/memblock.h>
 #include <linux/mm.h>
 #include <linux/numa.h>
@@ -26,9 +25,7 @@ EXPORT_SYMBOL_GPL(node_data);
  */
 void __init setup_bootmem_node(int nid, unsigned long start, unsigned long end)
 {
-	unsigned long bootmap_pages;
 	unsigned long start_pfn, end_pfn;
-	unsigned long bootmem_paddr;
 
 	/* Don't allow bogus node assignment */
 	BUG_ON(nid >= MAX_NUMNODES || nid <= 0);
@@ -48,25 +45,9 @@ void __init setup_bootmem_node(int nid, unsigned long start, unsigned long end)
 					     SMP_CACHE_BYTES, end));
 	memset(NODE_DATA(nid), 0, sizeof(struct pglist_data));
 
-	NODE_DATA(nid)->bdata = &bootmem_node_data[nid];
 	NODE_DATA(nid)->node_start_pfn = start_pfn;
 	NODE_DATA(nid)->node_spanned_pages = end_pfn - start_pfn;
 
-	/* Node-local bootmap */
-	bootmap_pages = bootmem_bootmap_pages(end_pfn - start_pfn);
-	bootmem_paddr = memblock_alloc_base(bootmap_pages << PAGE_SHIFT,
-				       PAGE_SIZE, end);
-	init_bootmem_node(NODE_DATA(nid), bootmem_paddr >> PAGE_SHIFT,
-			  start_pfn, end_pfn);
-
-	free_bootmem_with_active_regions(nid, end_pfn);
-
-	/* Reserve the pgdat and bootmap space with the bootmem allocator */
-	reserve_bootmem_node(NODE_DATA(nid), start_pfn << PAGE_SHIFT,
-			     sizeof(struct pglist_data), BOOTMEM_DEFAULT);
-	reserve_bootmem_node(NODE_DATA(nid), bootmem_paddr,
-			     bootmap_pages << PAGE_SHIFT, BOOTMEM_DEFAULT);
-
 	/* It's up */
 	node_set_online(nid);
 

arch/x86/entry/vdso/vdso32/vdso-fakesections.c

@@ -1 +0,0 @@
-#include "../vdso-fakesections.c"

arch/x86/events/core.c

@@ -27,6 +27,7 @@
 #include <linux/cpu.h>
 #include <linux/bitops.h>
 #include <linux/device.h>
+#include <linux/nospec.h>
 
 #include <asm/apic.h>
 #include <asm/stacktrace.h>
@@ -304,17 +305,20 @@ set_ext_hw_attr(struct hw_perf_event *hwc, struct perf_event *event)
 
 	config = attr->config;
 
-	cache_type = (config >>  0) & 0xff;
+	cache_type = (config >> 0) & 0xff;
 	if (cache_type >= PERF_COUNT_HW_CACHE_MAX)
 		return -EINVAL;
+	cache_type = array_index_nospec(cache_type, PERF_COUNT_HW_CACHE_MAX);
 
 	cache_op = (config >>  8) & 0xff;
 	if (cache_op >= PERF_COUNT_HW_CACHE_OP_MAX)
 		return -EINVAL;
+	cache_op = array_index_nospec(cache_op, PERF_COUNT_HW_CACHE_OP_MAX);
 
 	cache_result = (config >> 16) & 0xff;
 	if (cache_result >= PERF_COUNT_HW_CACHE_RESULT_MAX)
 		return -EINVAL;
+	cache_result = array_index_nospec(cache_result, PERF_COUNT_HW_CACHE_RESULT_MAX);
 
 	val = hw_cache_event_ids[cache_type][cache_op][cache_result];
 
@@ -421,6 +425,8 @@ int x86_setup_perfctr(struct perf_event *event)
 	if (attr->config >= x86_pmu.max_events)
 		return -EINVAL;
 
+	attr->config = array_index_nospec((unsigned long)attr->config, x86_pmu.max_events);
+
 	/*
 	 * The generic map:
 	 */

arch/x86/events/intel/cstate.c

@@ -92,6 +92,7 @@
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/perf_event.h>
+#include <linux/nospec.h>
 #include <asm/cpu_device_id.h>
 #include <asm/intel-family.h>
 #include "../perf_event.h"
@@ -302,6 +303,7 @@ static int cstate_pmu_event_init(struct perf_event *event)
 	} else if (event->pmu == &cstate_pkg_pmu) {
 		if (cfg >= PERF_CSTATE_PKG_EVENT_MAX)
 			return -EINVAL;
+		cfg = array_index_nospec((unsigned long)cfg, PERF_CSTATE_PKG_EVENT_MAX);
 		if (!pkg_msr[cfg].attr)
 			return -EINVAL;
 		event->hw.event_base = pkg_msr[cfg].msr;

arch/x86/events/msr.c

@@ -1,5 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 #include <linux/perf_event.h>
+#include <linux/nospec.h>
 #include <asm/intel-family.h>
 
 enum perf_msr_id {
@@ -158,9 +159,6 @@ static int msr_event_init(struct perf_event *event)
 	if (event->attr.type != event->pmu->type)
 		return -ENOENT;
 
-	if (cfg >= PERF_MSR_EVENT_MAX)
-		return -EINVAL;
-
 	/* unsupported modes and filters */
 	if (event->attr.exclude_user   ||
 	    event->attr.exclude_kernel ||
@@ -171,6 +169,11 @@ static int msr_event_init(struct perf_event *event)
 	    event->attr.sample_period) /* no sampling */
 		return -EINVAL;
 
+	if (cfg >= PERF_MSR_EVENT_MAX)
+		return -EINVAL;
+
+	cfg = array_index_nospec((unsigned long)cfg, PERF_MSR_EVENT_MAX);
+
 	if (!msr[cfg].attr)
 		return -EINVAL;
 

arch/x86/hyperv/Makefile

@@ -1 +1,2 @@
-obj-y		:= hv_init.o mmu.o
+obj-y			:= hv_init.o mmu.o
+obj-$(CONFIG_X86_64)	+= hv_apic.o

arch/x86/hyperv/hv_apic.c

@@ -0,0 +1,256 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/*
+ * Hyper-V specific APIC code.
+ *
+ * Copyright (C) 2018, Microsoft, Inc.
+ *
+ * Author : K. Y. Srinivasan <kys@microsoft.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ */
+
+#include <linux/types.h>
+#include <linux/version.h>
+#include <linux/vmalloc.h>
+#include <linux/mm.h>
+#include <linux/clockchips.h>
+#include <linux/hyperv.h>
+#include <linux/slab.h>
+#include <linux/cpuhotplug.h>
+#include <asm/hypervisor.h>
+#include <asm/mshyperv.h>
+#include <asm/apic.h>
+
+static struct apic orig_apic;
+
+static u64 hv_apic_icr_read(void)
+{
+	u64 reg_val;
+
+	rdmsrl(HV_X64_MSR_ICR, reg_val);
+	return reg_val;
+}
+
+static void hv_apic_icr_write(u32 low, u32 id)
+{
+	u64 reg_val;
+
+	reg_val = SET_APIC_DEST_FIELD(id);
+	reg_val = reg_val << 32;
+	reg_val |= low;
+
+	wrmsrl(HV_X64_MSR_ICR, reg_val);
+}
+
+static u32 hv_apic_read(u32 reg)
+{
+	u32 reg_val, hi;
+
+	switch (reg) {
+	case APIC_EOI:
+		rdmsr(HV_X64_MSR_EOI, reg_val, hi);
+		return reg_val;
+	case APIC_TASKPRI:
+		rdmsr(HV_X64_MSR_TPR, reg_val, hi);
+		return reg_val;
+
+	default:
+		return native_apic_mem_read(reg);
+	}
+}
+
+static void hv_apic_write(u32 reg, u32 val)
+{
+	switch (reg) {
+	case APIC_EOI:
+		wrmsr(HV_X64_MSR_EOI, val, 0);
+		break;
+	case APIC_TASKPRI:
+		wrmsr(HV_X64_MSR_TPR, val, 0);
+		break;
+	default:
+		native_apic_mem_write(reg, val);
+	}
+}
+
+static void hv_apic_eoi_write(u32 reg, u32 val)
+{
+	wrmsr(HV_X64_MSR_EOI, val, 0);
+}
+
+/*
+ * IPI implementation on Hyper-V.
+ */
+static bool __send_ipi_mask_ex(const struct cpumask *mask, int vector)
+{
+	struct ipi_arg_ex **arg;
+	struct ipi_arg_ex *ipi_arg;
+	unsigned long flags;
+	int nr_bank = 0;
+	int ret = 1;
+
+	local_irq_save(flags);
+	arg = (struct ipi_arg_ex **)this_cpu_ptr(hyperv_pcpu_input_arg);
+
+	ipi_arg = *arg;
+	if (unlikely(!ipi_arg))
+		goto ipi_mask_ex_done;
+
+	ipi_arg->vector = vector;
+	ipi_arg->reserved = 0;
+	ipi_arg->vp_set.valid_bank_mask = 0;
+
+	if (!cpumask_equal(mask, cpu_present_mask)) {
+		ipi_arg->vp_set.format = HV_GENERIC_SET_SPARSE_4K;
+		nr_bank = cpumask_to_vpset(&(ipi_arg->vp_set), mask);
+	}
+	if (!nr_bank)
+		ipi_arg->vp_set.format = HV_GENERIC_SET_ALL;
+
+	ret = hv_do_rep_hypercall(HVCALL_SEND_IPI_EX, 0, nr_bank,
+			      ipi_arg, NULL);
+
+ipi_mask_ex_done:
+	local_irq_restore(flags);
+	return ((ret == 0) ? true : false);
+}
+
+static bool __send_ipi_mask(const struct cpumask *mask, int vector)
+{
+	int cur_cpu, vcpu;
+	struct ipi_arg_non_ex **arg;
+	struct ipi_arg_non_ex *ipi_arg;
+	int ret = 1;
+	unsigned long flags;
+
+	if (cpumask_empty(mask))
+		return true;
+
+	if (!hv_hypercall_pg)
+		return false;
+
+	if ((vector < HV_IPI_LOW_VECTOR) || (vector > HV_IPI_HIGH_VECTOR))
+		return false;
+
+	if ((ms_hyperv.hints & HV_X64_EX_PROCESSOR_MASKS_RECOMMENDED))
+		return __send_ipi_mask_ex(mask, vector);
+
+	local_irq_save(flags);
+	arg = (struct ipi_arg_non_ex **)this_cpu_ptr(hyperv_pcpu_input_arg);
+
+	ipi_arg = *arg;
+	if (unlikely(!ipi_arg))
+		goto ipi_mask_done;
+
+	ipi_arg->vector = vector;
+	ipi_arg->reserved = 0;
+	ipi_arg->cpu_mask = 0;
+
+	for_each_cpu(cur_cpu, mask) {
+		vcpu = hv_cpu_number_to_vp_number(cur_cpu);
+		/*
+		 * This particular version of the IPI hypercall can
+		 * only target upto 64 CPUs.
+		 */
+		if (vcpu >= 64)
+			goto ipi_mask_done;
+
+		__set_bit(vcpu, (unsigned long *)&ipi_arg->cpu_mask);
+	}
+
+	ret = hv_do_hypercall(HVCALL_SEND_IPI, ipi_arg, NULL);
+
+ipi_mask_done:
+	local_irq_restore(flags);
+	return ((ret == 0) ? true : false);
+}
+
+static bool __send_ipi_one(int cpu, int vector)
+{
+	struct cpumask mask = CPU_MASK_NONE;
+
+	cpumask_set_cpu(cpu, &mask);
+	return __send_ipi_mask(&mask, vector);
+}
+
+static void hv_send_ipi(int cpu, int vector)
+{
+	if (!__send_ipi_one(cpu, vector))
+		orig_apic.send_IPI(cpu, vector);
+}
+
+static void hv_send_ipi_mask(const struct cpumask *mask, int vector)
+{
+	if (!__send_ipi_mask(mask, vector))
+		orig_apic.send_IPI_mask(mask, vector);
+}
+
+static void hv_send_ipi_mask_allbutself(const struct cpumask *mask, int vector)
+{
+	unsigned int this_cpu = smp_processor_id();
+	struct cpumask new_mask;
+	const struct cpumask *local_mask;
+
+	cpumask_copy(&new_mask, mask);
+	cpumask_clear_cpu(this_cpu, &new_mask);
+	local_mask = &new_mask;
+	if (!__send_ipi_mask(local_mask, vector))
+		orig_apic.send_IPI_mask_allbutself(mask, vector);
+}
+
+static void hv_send_ipi_allbutself(int vector)
+{
+	hv_send_ipi_mask_allbutself(cpu_online_mask, vector);
+}
+
+static void hv_send_ipi_all(int vector)
+{
+	if (!__send_ipi_mask(cpu_online_mask, vector))
+		orig_apic.send_IPI_all(vector);
+}
+
+static void hv_send_ipi_self(int vector)
+{
+	if (!__send_ipi_one(smp_processor_id(), vector))
+		orig_apic.send_IPI_self(vector);
+}
+
+void __init hv_apic_init(void)
+{
+	if (ms_hyperv.hints & HV_X64_CLUSTER_IPI_RECOMMENDED) {
+		if ((ms_hyperv.hints & HV_X64_EX_PROCESSOR_MASKS_RECOMMENDED))
+			pr_info("Hyper-V: Using ext hypercalls for IPI\n");
+		else
+			pr_info("Hyper-V: Using IPI hypercalls\n");
+		/*
+		 * Set the IPI entry points.
+		 */
+		orig_apic = *apic;
+
+		apic->send_IPI = hv_send_ipi;
+		apic->send_IPI_mask = hv_send_ipi_mask;
+		apic->send_IPI_mask_allbutself = hv_send_ipi_mask_allbutself;
+		apic->send_IPI_allbutself = hv_send_ipi_allbutself;
+		apic->send_IPI_all = hv_send_ipi_all;
+		apic->send_IPI_self = hv_send_ipi_self;
+	}
+
+	if (ms_hyperv.hints & HV_X64_APIC_ACCESS_RECOMMENDED) {
+		pr_info("Hyper-V: Using MSR based APIC access\n");
+		apic_set_eoi_write(hv_apic_eoi_write);
+		apic->read      = hv_apic_read;
+		apic->write     = hv_apic_write;
+		apic->icr_write = hv_apic_icr_write;
+		apic->icr_read  = hv_apic_icr_read;
+	}
+}

arch/x86/hyperv/hv_init.c

@@ -91,12 +91,19 @@ EXPORT_SYMBOL_GPL(hv_vp_index);
 struct hv_vp_assist_page **hv_vp_assist_page;
 EXPORT_SYMBOL_GPL(hv_vp_assist_page);
 
+void  __percpu **hyperv_pcpu_input_arg;
+EXPORT_SYMBOL_GPL(hyperv_pcpu_input_arg);
+
 u32 hv_max_vp_index;
 
 static int hv_cpu_init(unsigned int cpu)
 {
 	u64 msr_vp_index;
 	struct hv_vp_assist_page **hvp = &hv_vp_assist_page[smp_processor_id()];
+	void **input_arg;
+
+	input_arg = (void **)this_cpu_ptr(hyperv_pcpu_input_arg);
+	*input_arg = page_address(alloc_page(GFP_KERNEL));
 
 	hv_get_vp_index(msr_vp_index);
 
@@ -217,6 +224,16 @@ static int hv_cpu_die(unsigned int cpu)
 {
 	struct hv_reenlightenment_control re_ctrl;
 	unsigned int new_cpu;
+	unsigned long flags;
+	void **input_arg;
+	void *input_pg = NULL;
+
+	local_irq_save(flags);
+	input_arg = (void **)this_cpu_ptr(hyperv_pcpu_input_arg);
+	input_pg = *input_arg;
+	*input_arg = NULL;
+	local_irq_restore(flags);
+	free_page((unsigned long)input_pg);
 
 	if (hv_vp_assist_page && hv_vp_assist_page[cpu])
 		wrmsrl(HV_X64_MSR_VP_ASSIST_PAGE, 0);
@@ -242,8 +259,9 @@ static int hv_cpu_die(unsigned int cpu)
  *
  * 1. Setup the hypercall page.
  * 2. Register Hyper-V specific clocksource.
+ * 3. Setup Hyper-V specific APIC entry points.
  */
-void hyperv_init(void)
+void __init hyperv_init(void)
 {
 	u64 guest_id, required_msrs;
 	union hv_x64_msr_hypercall_contents hypercall_msr;
@@ -259,6 +277,16 @@ void hyperv_init(void)
 	if ((ms_hyperv.features & required_msrs) != required_msrs)
 		return;
 
+	/*
+	 * Allocate the per-CPU state for the hypercall input arg.
+	 * If this allocation fails, we will not be able to setup
+	 * (per-CPU) hypercall input page and thus this failure is
+	 * fatal on Hyper-V.
+	 */
+	hyperv_pcpu_input_arg = alloc_percpu(void  *);
+
+	BUG_ON(hyperv_pcpu_input_arg == NULL);
+
 	/* Allocate percpu VP index */
 	hv_vp_index = kmalloc_array(num_possible_cpus(), sizeof(*hv_vp_index),
 				    GFP_KERNEL);
@@ -296,7 +324,7 @@ void hyperv_init(void)
 	hypercall_msr.guest_physical_address = vmalloc_to_pfn(hv_hypercall_pg);
 	wrmsrl(HV_X64_MSR_HYPERCALL, hypercall_msr.as_uint64);
 
-	hyper_alloc_mmu();
+	hv_apic_init();
 
 	/*
 	 * Register Hyper-V specific clocksource.

arch/x86/hyperv/mmu.c

@@ -25,20 +25,13 @@ struct hv_flush_pcpu {
 struct hv_flush_pcpu_ex {
 	u64 address_space;
 	u64 flags;
-	struct {
-		u64 format;
-		u64 valid_bank_mask;
-		u64 bank_contents[];
-	} hv_vp_set;
+	struct hv_vpset hv_vp_set;
 	u64 gva_list[];
 };
 
 /* Each gva in gva_list encodes up to 4096 pages to flush */
 #define HV_TLB_FLUSH_UNIT (4096 * PAGE_SIZE)
 
-static struct hv_flush_pcpu __percpu **pcpu_flush;
-
-static struct hv_flush_pcpu_ex __percpu **pcpu_flush_ex;
 
 /*
  * Fills in gva_list starting from offset. Returns the number of items added.
@@ -70,41 +63,6 @@ static inline int fill_gva_list(u64 gva_list[], int offset,
 	return gva_n - offset;
 }
 
-/* Return the number of banks in the resulting vp_set */
-static inline int cpumask_to_vp_set(struct hv_flush_pcpu_ex *flush,
-				    const struct cpumask *cpus)
-{
-	int cpu, vcpu, vcpu_bank, vcpu_offset, nr_bank = 1;
-
-	/* valid_bank_mask can represent up to 64 banks */
-	if (hv_max_vp_index / 64 >= 64)
-		return 0;
-
-	/*
-	 * Clear all banks up to the maximum possible bank as hv_flush_pcpu_ex
-	 * structs are not cleared between calls, we risk flushing unneeded
-	 * vCPUs otherwise.
-	 */
-	for (vcpu_bank = 0; vcpu_bank <= hv_max_vp_index / 64; vcpu_bank++)
-		flush->hv_vp_set.bank_contents[vcpu_bank] = 0;
-
-	/*
-	 * Some banks may end up being empty but this is acceptable.
-	 */
-	for_each_cpu(cpu, cpus) {
-		vcpu = hv_cpu_number_to_vp_number(cpu);
-		vcpu_bank = vcpu / 64;
-		vcpu_offset = vcpu % 64;
-		__set_bit(vcpu_offset, (unsigned long *)
-			  &flush->hv_vp_set.bank_contents[vcpu_bank]);
-		if (vcpu_bank >= nr_bank)
-			nr_bank = vcpu_bank + 1;
-	}
-	flush->hv_vp_set.valid_bank_mask = GENMASK_ULL(nr_bank - 1, 0);
-
-	return nr_bank;
-}
-
 static void hyperv_flush_tlb_others(const struct cpumask *cpus,
 				    const struct flush_tlb_info *info)
 {
@@ -116,7 +74,7 @@ static void hyperv_flush_tlb_others(const struct cpumask *cpus,
 
 	trace_hyperv_mmu_flush_tlb_others(cpus, info);
 
-	if (!pcpu_flush || !hv_hypercall_pg)
+	if (!hv_hypercall_pg)
 		goto do_native;
 
 	if (cpumask_empty(cpus))
@@ -124,10 +82,8 @@ static void hyperv_flush_tlb_others(const struct cpumask *cpus,
 
 	local_irq_save(flags);
 
-	flush_pcpu = this_cpu_ptr(pcpu_flush);
-
-	if (unlikely(!*flush_pcpu))
-		*flush_pcpu = page_address(alloc_page(GFP_ATOMIC));
+	flush_pcpu = (struct hv_flush_pcpu **)
+		     this_cpu_ptr(hyperv_pcpu_input_arg);
 
 	flush = *flush_pcpu;
 
@@ -203,7 +159,7 @@ static void hyperv_flush_tlb_others_ex(const struct cpumask *cpus,
 
 	trace_hyperv_mmu_flush_tlb_others(cpus, info);
 
-	if (!pcpu_flush_ex || !hv_hypercall_pg)
+	if (!hv_hypercall_pg)
 		goto do_native;
 
 	if (cpumask_empty(cpus))
@@ -211,10 +167,8 @@ static void hyperv_flush_tlb_others_ex(const struct cpumask *cpus,
 
 	local_irq_save(flags);
 
-	flush_pcpu = this_cpu_ptr(pcpu_flush_ex);
-
-	if (unlikely(!*flush_pcpu))
-		*flush_pcpu = page_address(alloc_page(GFP_ATOMIC));
+	flush_pcpu = (struct hv_flush_pcpu_ex **)
+		     this_cpu_ptr(hyperv_pcpu_input_arg);
 
 	flush = *flush_pcpu;
 
@@ -239,8 +193,8 @@ static void hyperv_flush_tlb_others_ex(const struct cpumask *cpus,
 	flush->hv_vp_set.valid_bank_mask = 0;
 
 	if (!cpumask_equal(cpus, cpu_present_mask)) {
-		flush->hv_vp_set.format = HV_GENERIC_SET_SPARCE_4K;
-		nr_bank = cpumask_to_vp_set(flush, cpus);
+		flush->hv_vp_set.format = HV_GENERIC_SET_SPARSE_4K;
+		nr_bank = cpumask_to_vpset(&(flush->hv_vp_set), cpus);
 	}
 
 	if (!nr_bank) {
@@ -296,14 +250,3 @@ void hyperv_setup_mmu_ops(void)
 		pv_mmu_ops.flush_tlb_others = hyperv_flush_tlb_others_ex;
 	}
 }
-
-void hyper_alloc_mmu(void)
-{
-	if (!(ms_hyperv.hints & HV_X64_REMOTE_TLB_FLUSH_RECOMMENDED))
-		return;
-
-	if (!(ms_hyperv.hints & HV_X64_EX_PROCESSOR_MASKS_RECOMMENDED))
-		pcpu_flush = alloc_percpu(struct hv_flush_pcpu *);
-	else
-		pcpu_flush_ex = alloc_percpu(struct hv_flush_pcpu_ex *);
-}

arch/x86/include/asm/hyperv-tlfs.h

@@ -164,6 +164,11 @@
  */
 #define HV_X64_DEPRECATING_AEOI_RECOMMENDED	(1 << 9)
 
+/*
+ * Recommend using cluster IPI hypercalls.
+ */
+#define HV_X64_CLUSTER_IPI_RECOMMENDED         (1 << 10)
+
 /* Recommend using the newer ExProcessorMasks interface */
 #define HV_X64_EX_PROCESSOR_MASKS_RECOMMENDED	(1 << 11)
 
@@ -332,12 +337,17 @@ struct hv_tsc_emulation_status {
 #define HV_X64_MSR_HYPERCALL_PAGE_ADDRESS_MASK	\
 		(~((1ull << HV_X64_MSR_HYPERCALL_PAGE_ADDRESS_SHIFT) - 1))
 
+#define HV_IPI_LOW_VECTOR	0x10
+#define HV_IPI_HIGH_VECTOR	0xff
+
 /* Declare the various hypercall operations. */
 #define HVCALL_FLUSH_VIRTUAL_ADDRESS_SPACE	0x0002
 #define HVCALL_FLUSH_VIRTUAL_ADDRESS_LIST	0x0003
 #define HVCALL_NOTIFY_LONG_SPIN_WAIT		0x0008
+#define HVCALL_SEND_IPI				0x000b
 #define HVCALL_FLUSH_VIRTUAL_ADDRESS_SPACE_EX  0x0013
 #define HVCALL_FLUSH_VIRTUAL_ADDRESS_LIST_EX   0x0014
+#define HVCALL_SEND_IPI_EX			0x0015
 #define HVCALL_POST_MESSAGE			0x005c
 #define HVCALL_SIGNAL_EVENT			0x005d
 
@@ -363,7 +373,7 @@ struct hv_tsc_emulation_status {
 #define HV_FLUSH_USE_EXTENDED_RANGE_FORMAT	BIT(3)
 
 enum HV_GENERIC_SET_FORMAT {
-	HV_GENERIC_SET_SPARCE_4K,
+	HV_GENERIC_SET_SPARSE_4K,
 	HV_GENERIC_SET_ALL,
 };
 
@@ -713,4 +723,22 @@ struct hv_enlightened_vmcs {
 #define HV_STIMER_AUTOENABLE		(1ULL << 3)
 #define HV_STIMER_SINT(config)		(__u8)(((config) >> 16) & 0x0F)
 
+struct ipi_arg_non_ex {
+	u32 vector;
+	u32 reserved;
+	u64 cpu_mask;
+};
+
+struct hv_vpset {
+	u64 format;
+	u64 valid_bank_mask;
+	u64 bank_contents[];
+};
+
+struct ipi_arg_ex {
+	u32 vector;
+	u32 reserved;
+	struct hv_vpset vp_set;
+};
+
 #endif

arch/x86/include/asm/mshyperv.h

@@ -122,6 +122,7 @@ static inline void hv_disable_stimer0_percpu_irq(int irq) {}
 #if IS_ENABLED(CONFIG_HYPERV)
 extern struct clocksource *hyperv_cs;
 extern void *hv_hypercall_pg;
+extern void  __percpu  **hyperv_pcpu_input_arg;
 
 static inline u64 hv_do_hypercall(u64 control, void *input, void *output)
 {
@@ -258,9 +259,41 @@ static inline int hv_cpu_number_to_vp_number(int cpu_number)
 	return hv_vp_index[cpu_number];
 }
 
-void hyperv_init(void);
+static inline int cpumask_to_vpset(struct hv_vpset *vpset,
+				    const struct cpumask *cpus)
+{
+	int cpu, vcpu, vcpu_bank, vcpu_offset, nr_bank = 1;
+
+	/* valid_bank_mask can represent up to 64 banks */
+	if (hv_max_vp_index / 64 >= 64)
+		return 0;
+
+	/*
+	 * Clear all banks up to the maximum possible bank as hv_flush_pcpu_ex
+	 * structs are not cleared between calls, we risk flushing unneeded
+	 * vCPUs otherwise.
+	 */
+	for (vcpu_bank = 0; vcpu_bank <= hv_max_vp_index / 64; vcpu_bank++)
+		vpset->bank_contents[vcpu_bank] = 0;
+
+	/*
+	 * Some banks may end up being empty but this is acceptable.
+	 */
+	for_each_cpu(cpu, cpus) {
+		vcpu = hv_cpu_number_to_vp_number(cpu);
+		vcpu_bank = vcpu / 64;
+		vcpu_offset = vcpu % 64;
+		__set_bit(vcpu_offset, (unsigned long *)
+			  &vpset->bank_contents[vcpu_bank]);
+		if (vcpu_bank >= nr_bank)
+			nr_bank = vcpu_bank + 1;
+	}
+	vpset->valid_bank_mask = GENMASK_ULL(nr_bank - 1, 0);
+	return nr_bank;
+}
+
+void __init hyperv_init(void);
 void hyperv_setup_mmu_ops(void);
-void hyper_alloc_mmu(void);
 void hyperv_report_panic(struct pt_regs *regs, long err);
 bool hv_is_hyperv_initialized(void);
 void hyperv_cleanup(void);
@@ -269,6 +302,13 @@ void hyperv_reenlightenment_intr(struct pt_regs *regs);
 void set_hv_tscchange_cb(void (*cb)(void));
 void clear_hv_tscchange_cb(void);
 void hyperv_stop_tsc_emulation(void);
+
+#ifdef CONFIG_X86_64
+void hv_apic_init(void);
+#else
+static inline void hv_apic_init(void) {}
+#endif
+
 #else /* CONFIG_HYPERV */
 static inline void hyperv_init(void) {}
 static inline bool hv_is_hyperv_initialized(void) { return false; }

arch/x86/include/uapi/asm/kvm_para.h

@@ -29,7 +29,7 @@
 #define KVM_FEATURE_PV_TLB_FLUSH	9
 #define KVM_FEATURE_ASYNC_PF_VMEXIT	10
 
-#define KVM_HINTS_DEDICATED      0
+#define KVM_HINTS_REALTIME      0
 
 /* The last 8 bits are used to indicate how to interpret the flags field
  * in pvclock structure. If no bits are set, all flags are ignored.

arch/x86/kernel/amd_nb.c

@@ -14,8 +14,11 @@
 #include <asm/amd_nb.h>
 
 #define PCI_DEVICE_ID_AMD_17H_ROOT	0x1450
+#define PCI_DEVICE_ID_AMD_17H_M10H_ROOT	0x15d0
 #define PCI_DEVICE_ID_AMD_17H_DF_F3	0x1463
 #define PCI_DEVICE_ID_AMD_17H_DF_F4	0x1464
+#define PCI_DEVICE_ID_AMD_17H_M10H_DF_F3 0x15eb
+#define PCI_DEVICE_ID_AMD_17H_M10H_DF_F4 0x15ec
 
 /* Protect the PCI config register pairs used for SMN and DF indirect access. */
 static DEFINE_MUTEX(smn_mutex);
@@ -24,6 +27,7 @@ static u32 *flush_words;
 
 static const struct pci_device_id amd_root_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_17H_ROOT) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_17H_M10H_ROOT) },
 	{}
 };
 
@@ -39,6 +43,7 @@ const struct pci_device_id amd_nb_misc_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_16H_NB_F3) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_16H_M30H_NB_F3) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_17H_DF_F3) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_17H_M10H_DF_F3) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CNB17H_F3) },
 	{}
 };
@@ -51,6 +56,7 @@ static const struct pci_device_id amd_nb_link_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_16H_NB_F4) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_16H_M30H_NB_F4) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_17H_DF_F4) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_17H_M10H_DF_F4) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CNB17H_F4) },
 	{}
 };

arch/x86/kernel/kvm.c

@@ -457,7 +457,7 @@ static void __init sev_map_percpu_data(void)
 static void __init kvm_smp_prepare_cpus(unsigned int max_cpus)
 {
 	native_smp_prepare_cpus(max_cpus);
-	if (kvm_para_has_hint(KVM_HINTS_DEDICATED))
+	if (kvm_para_has_hint(KVM_HINTS_REALTIME))
 		static_branch_disable(&virt_spin_lock_key);
 }
 
@@ -553,7 +553,7 @@ static void __init kvm_guest_init(void)
 	}
 
 	if (kvm_para_has_feature(KVM_FEATURE_PV_TLB_FLUSH) &&
-	    !kvm_para_has_hint(KVM_HINTS_DEDICATED) &&
+	    !kvm_para_has_hint(KVM_HINTS_REALTIME) &&
 	    kvm_para_has_feature(KVM_FEATURE_STEAL_TIME))
 		pv_mmu_ops.flush_tlb_others = kvm_flush_tlb_others;
 
@@ -649,7 +649,7 @@ static __init int kvm_setup_pv_tlb_flush(void)
 	int cpu;
 
 	if (kvm_para_has_feature(KVM_FEATURE_PV_TLB_FLUSH) &&
-	    !kvm_para_has_hint(KVM_HINTS_DEDICATED) &&
+	    !kvm_para_has_hint(KVM_HINTS_REALTIME) &&
 	    kvm_para_has_feature(KVM_FEATURE_STEAL_TIME)) {
 		for_each_possible_cpu(cpu) {
 			zalloc_cpumask_var_node(per_cpu_ptr(&__pv_tlb_mask, cpu),
@@ -745,7 +745,7 @@ void __init kvm_spinlock_init(void)
 	if (!kvm_para_has_feature(KVM_FEATURE_PV_UNHALT))
 		return;
 
-	if (kvm_para_has_hint(KVM_HINTS_DEDICATED))
+	if (kvm_para_has_hint(KVM_HINTS_REALTIME))
 		return;
 
 	__pv_init_lock_hash();

arch/x86/kvm/x86.c

@@ -114,7 +114,7 @@ module_param(ignore_msrs, bool, S_IRUGO | S_IWUSR);
 static bool __read_mostly report_ignored_msrs = true;
 module_param(report_ignored_msrs, bool, S_IRUGO | S_IWUSR);
 
-unsigned int min_timer_period_us = 500;
+unsigned int min_timer_period_us = 200;
 module_param(min_timer_period_us, uint, S_IRUGO | S_IWUSR);
 
 static bool __read_mostly kvmclock_periodic_sync = true;

arch/x86/xen/enlighten_hvm.c

@@ -65,6 +65,19 @@ static void __init xen_hvm_init_mem_mapping(void)
 {
 	early_memunmap(HYPERVISOR_shared_info, PAGE_SIZE);
 	HYPERVISOR_shared_info = __va(PFN_PHYS(shared_info_pfn));
+
+	/*
+	 * The virtual address of the shared_info page has changed, so
+	 * the vcpu_info pointer for VCPU 0 is now stale.
+	 *
+	 * The prepare_boot_cpu callback will re-initialize it via
+	 * xen_vcpu_setup, but we can't rely on that to be called for
+	 * old Xen versions (xen_have_vector_callback == 0).
+	 *
+	 * It is, in any case, bad to have a stale vcpu_info pointer
+	 * so reset it now.
+	 */
+	xen_vcpu_info_reset(0);
 }
 
 static void __init init_hvm_pv_info(void)

arch/x86/xen/mmu.c

@@ -42,13 +42,11 @@ xmaddr_t arbitrary_virt_to_machine(void *vaddr)
 }
 EXPORT_SYMBOL_GPL(arbitrary_virt_to_machine);
 
-static void xen_flush_tlb_all(void)
+static noinline void xen_flush_tlb_all(void)
 {
 	struct mmuext_op *op;
 	struct multicall_space mcs;
 
-	trace_xen_mmu_flush_tlb_all(0);
-
 	preempt_disable();
 
 	mcs = xen_mc_entry(sizeof(*op));

arch/x86/xen/mmu_pv.c

@@ -1310,13 +1310,11 @@ unsigned long xen_read_cr2_direct(void)
 	return this_cpu_read(xen_vcpu_info.arch.cr2);
 }
 
-static void xen_flush_tlb(void)
+static noinline void xen_flush_tlb(void)
 {
 	struct mmuext_op *op;
 	struct multicall_space mcs;
 
-	trace_xen_mmu_flush_tlb(0);
-
 	preempt_disable();
 
 	mcs = xen_mc_entry(sizeof(*op));

drivers/acpi/acpica/acnamesp.h

@@ -56,6 +56,10 @@ acpi_status acpi_ns_initialize_objects(void);
 
 acpi_status acpi_ns_initialize_devices(u32 flags);
 
+acpi_status
+acpi_ns_init_one_package(acpi_handle obj_handle,
+			 u32 level, void *context, void **return_value);
+
 /*
  * nsload -  Namespace loading
  */

drivers/acpi/acpica/exconfig.c

@@ -174,6 +174,13 @@ acpi_ex_load_table_op(struct acpi_walk_state *walk_state,
 		return_ACPI_STATUS(status);
 	}
 
+	/* Complete the initialization/resolution of package objects */
+
+	status = acpi_ns_walk_namespace(ACPI_TYPE_PACKAGE, ACPI_ROOT_OBJECT,
+					ACPI_UINT32_MAX, 0,
+					acpi_ns_init_one_package, NULL, NULL,
+					NULL);
+
 	/* Parameter Data (optional) */
 
 	if (parameter_node) {
@@ -430,6 +437,13 @@ acpi_ex_load_op(union acpi_operand_object *obj_desc,
 		return_ACPI_STATUS(status);
 	}
 
+	/* Complete the initialization/resolution of package objects */
+
+	status = acpi_ns_walk_namespace(ACPI_TYPE_PACKAGE, ACPI_ROOT_OBJECT,
+					ACPI_UINT32_MAX, 0,
+					acpi_ns_init_one_package, NULL, NULL,
+					NULL);
+
 	/* Store the ddb_handle into the Target operand */
 
 	status = acpi_ex_store(ddb_handle, target, walk_state);

drivers/acpi/acpica/nsinit.c

@@ -240,6 +240,58 @@ error_exit:
 	return_ACPI_STATUS(status);
 }
 
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ns_init_one_package
+ *
+ * PARAMETERS:  obj_handle      - Node
+ *              level           - Current nesting level
+ *              context         - Not used
+ *              return_value    - Not used
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Callback from acpi_walk_namespace. Invoked for every package
+ *              within the namespace. Used during dynamic load of an SSDT.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ns_init_one_package(acpi_handle obj_handle,
+			 u32 level, void *context, void **return_value)
+{
+	acpi_status status;
+	union acpi_operand_object *obj_desc;
+	struct acpi_namespace_node *node =
+	    (struct acpi_namespace_node *)obj_handle;
+
+	obj_desc = acpi_ns_get_attached_object(node);
+	if (!obj_desc) {
+		return (AE_OK);
+	}
+
+	/* Exit if package is already initialized */
+
+	if (obj_desc->package.flags & AOPOBJ_DATA_VALID) {
+		return (AE_OK);
+	}
+
+	status = acpi_ds_get_package_arguments(obj_desc);
+	if (ACPI_FAILURE(status)) {
+		return (AE_OK);
+	}
+
+	status =
+	    acpi_ut_walk_package_tree(obj_desc, NULL,
+				      acpi_ds_init_package_element, NULL);
+	if (ACPI_FAILURE(status)) {
+		return (AE_OK);
+	}
+
+	obj_desc->package.flags |= AOPOBJ_DATA_VALID;
+	return (AE_OK);
+}
+
 /*******************************************************************************
  *
  * FUNCTION:    acpi_ns_init_one_object
@@ -360,27 +412,11 @@ acpi_ns_init_one_object(acpi_handle obj_handle,
 
 	case ACPI_TYPE_PACKAGE:
 
-		info->package_init++;
-		status = acpi_ds_get_package_arguments(obj_desc);
-		if (ACPI_FAILURE(status)) {
-			break;
-		}
-
-		ACPI_DEBUG_PRINT_RAW((ACPI_DB_PARSE,
-				      "%s: Completing resolution of Package elements\n",
-				      ACPI_GET_FUNCTION_NAME));
+		/* Complete the initialization/resolution of the package object */
 
-		/*
-		 * Resolve all named references in package objects (and all
-		 * sub-packages). This action has been deferred until the entire
-		 * namespace has been loaded, in order to support external and
-		 * forward references from individual package elements (05/2017).
-		 */
-		status = acpi_ut_walk_package_tree(obj_desc, NULL,
-						   acpi_ds_init_package_element,
-						   NULL);
-
-		obj_desc->package.flags |= AOPOBJ_DATA_VALID;
+		info->package_init++;
+		status =
+		    acpi_ns_init_one_package(obj_handle, level, NULL, NULL);
 		break;
 
 	default:

drivers/ata/ahci.c

@@ -698,7 +698,7 @@ static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class,
 
 	DPRINTK("ENTER\n");
 
-	ahci_stop_engine(ap);
+	hpriv->stop_engine(ap);
 
 	rc = sata_link_hardreset(link, sata_ehc_deb_timing(&link->eh_context),
 				 deadline, &online, NULL);
@@ -724,7 +724,7 @@ static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class,
 	bool online;
 	int rc;
 
-	ahci_stop_engine(ap);
+	hpriv->stop_engine(ap);
 
 	/* clear D2H reception area to properly wait for D2H FIS */
 	ata_tf_init(link->device, &tf);
@@ -788,7 +788,7 @@ static int ahci_avn_hardreset(struct ata_link *link, unsigned int *class,
 
 	DPRINTK("ENTER\n");
 
-	ahci_stop_engine(ap);
+	hpriv->stop_engine(ap);
 
 	for (i = 0; i < 2; i++) {
 		u16 val;

drivers/ata/ahci.h

@@ -350,7 +350,6 @@ struct ahci_host_priv {
 	u32			em_msg_type;	/* EM message type */
 	bool			got_runtime_pm; /* Did we do pm_runtime_get? */
 	struct clk		*clks[AHCI_MAX_CLKS]; /* Optional */
-	struct reset_control	*rsts;		/* Optional */
 	struct regulator	**target_pwrs;	/* Optional */
 	/*
 	 * If platform uses PHYs. There is a 1:1 relation between the port number and
@@ -366,6 +365,13 @@ struct ahci_host_priv {
 	 * be overridden anytime before the host is activated.
 	 */
 	void			(*start_engine)(struct ata_port *ap);
+	/*
+	 * Optional ahci_stop_engine override, if not set this gets set to the
+	 * default ahci_stop_engine during ahci_save_initial_config, this can
+	 * be overridden anytime before the host is activated.
+	 */
+	int			(*stop_engine)(struct ata_port *ap);
+
 	irqreturn_t 		(*irq_handler)(int irq, void *dev_instance);
 
 	/* only required for per-port MSI(-X) support */

drivers/ata/ahci_mvebu.c

@@ -62,6 +62,60 @@ static void ahci_mvebu_regret_option(struct ahci_host_priv *hpriv)
 	writel(0x80, hpriv->mmio + AHCI_VENDOR_SPECIFIC_0_DATA);
 }
 
+/**
+ * ahci_mvebu_stop_engine
+ *
+ * @ap:	Target ata port
+ *
+ * Errata Ref#226 - SATA Disk HOT swap issue when connected through
+ * Port Multiplier in FIS-based Switching mode.
+ *
+ * To avoid the issue, according to design, the bits[11:8, 0] of
+ * register PxFBS are cleared when Port Command and Status (0x18) bit[0]
+ * changes its value from 1 to 0, i.e. falling edge of Port
+ * Command and Status bit[0] sends PULSE that resets PxFBS
+ * bits[11:8; 0].
+ *
+ * This function is used to override function of "ahci_stop_engine"
+ * from libahci.c by adding the mvebu work around(WA) to save PxFBS
+ * value before the PxCMD ST write of 0, then restore PxFBS value.
+ *
+ * Return: 0 on success; Error code otherwise.
+ */
+int ahci_mvebu_stop_engine(struct ata_port *ap)
+{
+	void __iomem *port_mmio = ahci_port_base(ap);
+	u32 tmp, port_fbs;
+
+	tmp = readl(port_mmio + PORT_CMD);
+
+	/* check if the HBA is idle */
+	if ((tmp & (PORT_CMD_START | PORT_CMD_LIST_ON)) == 0)
+		return 0;
+
+	/* save the port PxFBS register for later restore */
+	port_fbs = readl(port_mmio + PORT_FBS);
+
+	/* setting HBA to idle */
+	tmp &= ~PORT_CMD_START;
+	writel(tmp, port_mmio + PORT_CMD);
+
+	/*
+	 * bit #15 PxCMD signal doesn't clear PxFBS,
+	 * restore the PxFBS register right after clearing the PxCMD ST,
+	 * no need to wait for the PxCMD bit #15.
+	 */
+	writel(port_fbs, port_mmio + PORT_FBS);
+
+	/* wait for engine to stop. This could be as long as 500 msec */
+	tmp = ata_wait_register(ap, port_mmio + PORT_CMD,
+				PORT_CMD_LIST_ON, PORT_CMD_LIST_ON, 1, 500);
+	if (tmp & PORT_CMD_LIST_ON)
+		return -EIO;
+
+	return 0;
+}
+
 #ifdef CONFIG_PM_SLEEP
 static int ahci_mvebu_suspend(struct platform_device *pdev, pm_message_t state)
 {
@@ -112,6 +166,8 @@ static int ahci_mvebu_probe(struct platform_device *pdev)
 	if (rc)
 		return rc;
 
+	hpriv->stop_engine = ahci_mvebu_stop_engine;
+
 	if (of_device_is_compatible(pdev->dev.of_node,
 				    "marvell,armada-380-ahci")) {
 		dram = mv_mbus_dram_info();

drivers/ata/ahci_qoriq.c

@@ -96,7 +96,7 @@ static int ahci_qoriq_hardreset(struct ata_link *link, unsigned int *class,
 
 	DPRINTK("ENTER\n");
 
-	ahci_stop_engine(ap);
+	hpriv->stop_engine(ap);
 
 	/*
 	 * There is a errata on ls1021a Rev1.0 and Rev2.0 which is:

drivers/ata/ahci_xgene.c

@@ -165,7 +165,7 @@ static int xgene_ahci_restart_engine(struct ata_port *ap)
 				    PORT_CMD_ISSUE, 0x0, 1, 100))
 		  return -EBUSY;
 
-	ahci_stop_engine(ap);
+	hpriv->stop_engine(ap);
 	ahci_start_fis_rx(ap);
 
 	/*
@@ -421,7 +421,7 @@ static int xgene_ahci_hardreset(struct ata_link *link, unsigned int *class,
 	portrxfis_saved = readl(port_mmio + PORT_FIS_ADDR);
 	portrxfishi_saved = readl(port_mmio + PORT_FIS_ADDR_HI);
 
-	ahci_stop_engine(ap);
+	hpriv->stop_engine(ap);
 
 	rc = xgene_ahci_do_hardreset(link, deadline, &online);
 

drivers/ata/libahci.c

@@ -560,6 +560,9 @@ void ahci_save_initial_config(struct device *dev, struct ahci_host_priv *hpriv)
 	if (!hpriv->start_engine)
 		hpriv->start_engine = ahci_start_engine;
 
+	if (!hpriv->stop_engine)
+		hpriv->stop_engine = ahci_stop_engine;
+
 	if (!hpriv->irq_handler)
 		hpriv->irq_handler = ahci_single_level_irq_intr;
 }
@@ -897,9 +900,10 @@ static void ahci_start_port(struct ata_port *ap)
 static int ahci_deinit_port(struct ata_port *ap, const char **emsg)
 {
 	int rc;
+	struct ahci_host_priv *hpriv = ap->host->private_data;
 
 	/* disable DMA */
-	rc = ahci_stop_engine(ap);
+	rc = hpriv->stop_engine(ap);
 	if (rc) {
 		*emsg = "failed to stop engine";
 		return rc;
@@ -1310,7 +1314,7 @@ int ahci_kick_engine(struct ata_port *ap)
 	int busy, rc;
 
 	/* stop engine */
-	rc = ahci_stop_engine(ap);
+	rc = hpriv->stop_engine(ap);
 	if (rc)
 		goto out_restart;
 
@@ -1549,7 +1553,7 @@ int ahci_do_hardreset(struct ata_link *link, unsigned int *class,
 
 	DPRINTK("ENTER\n");
 
-	ahci_stop_engine(ap);
+	hpriv->stop_engine(ap);
 
 	/* clear D2H reception area to properly wait for D2H FIS */
 	ata_tf_init(link->device, &tf);
@@ -2075,14 +2079,14 @@ void ahci_error_handler(struct ata_port *ap)
 
 	if (!(ap->pflags & ATA_PFLAG_FROZEN)) {
 		/* restart engine */
-		ahci_stop_engine(ap);
+		hpriv->stop_engine(ap);
 		hpriv->start_engine(ap);
 	}
 
 	sata_pmp_error_handler(ap);
 
 	if (!ata_dev_enabled(ap->link.device))
-		ahci_stop_engine(ap);
+		hpriv->stop_engine(ap);
 }
 EXPORT_SYMBOL_GPL(ahci_error_handler);
 
@@ -2129,7 +2133,7 @@ static void ahci_set_aggressive_devslp(struct ata_port *ap, bool sleep)
 		return;
 
 	/* set DITO, MDAT, DETO and enable DevSlp, need to stop engine first */
-	rc = ahci_stop_engine(ap);
+	rc = hpriv->stop_engine(ap);
 	if (rc)
 		return;
 
@@ -2189,7 +2193,7 @@ static void ahci_enable_fbs(struct ata_port *ap)
 		return;
 	}
 
-	rc = ahci_stop_engine(ap);
+	rc = hpriv->stop_engine(ap);
 	if (rc)
 		return;
 
@@ -2222,7 +2226,7 @@ static void ahci_disable_fbs(struct ata_port *ap)
 		return;
 	}
 
-	rc = ahci_stop_engine(ap);
+	rc = hpriv->stop_engine(ap);
 	if (rc)
 		return;
 

drivers/ata/libahci_platform.c

@@ -25,7 +25,6 @@
 #include <linux/phy/phy.h>
 #include <linux/pm_runtime.h>
 #include <linux/of_platform.h>
-#include <linux/reset.h>
 #include "ahci.h"
 
 static void ahci_host_stop(struct ata_host *host);
@@ -196,8 +195,7 @@ EXPORT_SYMBOL_GPL(ahci_platform_disable_regulators);
  * following order:
  * 1) Regulator
  * 2) Clocks (through ahci_platform_enable_clks)
- * 3) Resets
- * 4) Phys
+ * 3) Phys
  *
  * If resource enabling fails at any point the previous enabled resources
  * are disabled in reverse order.
@@ -217,19 +215,12 @@ int ahci_platform_enable_resources(struct ahci_host_priv *hpriv)
 	if (rc)
 		goto disable_regulator;
 
-	rc = reset_control_deassert(hpriv->rsts);
-	if (rc)
-		goto disable_clks;
-
 	rc = ahci_platform_enable_phys(hpriv);
 	if (rc)
-		goto disable_resets;
+		goto disable_clks;
 
 	return 0;
 
-disable_resets:
-	reset_control_assert(hpriv->rsts);
-
 disable_clks:
 	ahci_platform_disable_clks(hpriv);
 
@@ -248,15 +239,12 @@ EXPORT_SYMBOL_GPL(ahci_platform_enable_resources);
  * following order:
  * 1) Phys
  * 2) Clocks (through ahci_platform_disable_clks)
- * 3) Resets
- * 4) Regulator
+ * 3) Regulator
  */
 void ahci_platform_disable_resources(struct ahci_host_priv *hpriv)
 {
 	ahci_platform_disable_phys(hpriv);
 
-	reset_control_assert(hpriv->rsts);
-
 	ahci_platform_disable_clks(hpriv);
 
 	ahci_platform_disable_regulators(hpriv);
@@ -405,12 +393,6 @@ struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev)
 		hpriv->clks[i] = clk;
 	}
 
-	hpriv->rsts = devm_reset_control_array_get_optional_shared(dev);
-	if (IS_ERR(hpriv->rsts)) {
-		rc = PTR_ERR(hpriv->rsts);
-		goto err_out;
-	}
-
 	hpriv->nports = child_nodes = of_get_child_count(dev->of_node);
 
 	/*

drivers/ata/libata-core.c

@@ -4549,6 +4549,12 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
 						ATA_HORKAGE_ZERO_AFTER_TRIM |
 						ATA_HORKAGE_NOLPM, },
 
+	/* This specific Samsung model/firmware-rev does not handle LPM well */
+	{ "SAMSUNG MZMPC128HBFU-000MV", "CXM14M1Q", ATA_HORKAGE_NOLPM, },
+
+	/* Sandisk devices which are known to not handle LPM well */
+	{ "SanDisk SD7UB3Q*G1001",	NULL,	ATA_HORKAGE_NOLPM, },
+
 	/* devices that don't properly handle queued TRIM commands */
 	{ "Micron_M500_*",		NULL,	ATA_HORKAGE_NO_NCQ_TRIM |
 						ATA_HORKAGE_ZERO_AFTER_TRIM, },

drivers/ata/libata-eh.c

@@ -175,8 +175,8 @@ static void ata_eh_handle_port_resume(struct ata_port *ap)
 { }
 #endif /* CONFIG_PM */
 
-static void __ata_ehi_pushv_desc(struct ata_eh_info *ehi, const char *fmt,
-				 va_list args)
+static __printf(2, 0) void __ata_ehi_pushv_desc(struct ata_eh_info *ehi,
+				 const char *fmt, va_list args)
 {
 	ehi->desc_len += vscnprintf(ehi->desc + ehi->desc_len,
 				     ATA_EH_DESC_LEN - ehi->desc_len,

drivers/ata/sata_highbank.c

@@ -410,7 +410,7 @@ static int ahci_highbank_hardreset(struct ata_link *link, unsigned int *class,
 	int rc;
 	int retry = 100;
 
-	ahci_stop_engine(ap);
+	hpriv->stop_engine(ap);
 
 	/* clear D2H reception area to properly wait for D2H FIS */
 	ata_tf_init(link->device, &tf);

drivers/ata/sata_sil24.c

@@ -285,13 +285,13 @@ static const struct sil24_cerr_info {
 	[PORT_CERR_INCONSISTENT] = { AC_ERR_HSM, ATA_EH_RESET,
 				     "protocol mismatch" },
 	[PORT_CERR_DIRECTION]	= { AC_ERR_HSM, ATA_EH_RESET,
-				    "data directon mismatch" },
+				    "data direction mismatch" },
 	[PORT_CERR_UNDERRUN]	= { AC_ERR_HSM, ATA_EH_RESET,
 				    "ran out of SGEs while writing" },
 	[PORT_CERR_OVERRUN]	= { AC_ERR_HSM, ATA_EH_RESET,
 				    "ran out of SGEs while reading" },
 	[PORT_CERR_PKT_PROT]	= { AC_ERR_HSM, ATA_EH_RESET,
-				    "invalid data directon for ATAPI CDB" },
+				    "invalid data direction for ATAPI CDB" },
 	[PORT_CERR_SGT_BOUNDARY] = { AC_ERR_SYSTEM, ATA_EH_RESET,
 				     "SGT not on qword boundary" },
 	[PORT_CERR_SGT_TGTABRT]	= { AC_ERR_HOST_BUS, ATA_EH_RESET,

drivers/atm/firestream.c

@@ -191,7 +191,7 @@ static char *res_strings[] = {
 	"reserved 37",
 	"reserved 38",
 	"reserved 39",
-	"reseverd 40",
+	"reserved 40",
 	"reserved 41", 
 	"reserved 42", 
 	"reserved 43", 

drivers/atm/zatm.c

@@ -28,6 +28,7 @@
 #include <asm/io.h>
 #include <linux/atomic.h>
 #include <linux/uaccess.h>
+#include <linux/nospec.h>
 
 #include "uPD98401.h"
 #include "uPD98402.h"
@@ -1458,6 +1459,8 @@ static int zatm_ioctl(struct atm_dev *dev,unsigned int cmd,void __user *arg)
 					return -EFAULT;
 				if (pool < 0 || pool > ZATM_LAST_POOL)
 					return -EINVAL;
+				pool = array_index_nospec(pool,
+							  ZATM_LAST_POOL + 1);
 				spin_lock_irqsave(&zatm_dev->lock, flags);
 				info = zatm_dev->pool_info[pool];
 				if (cmd == ZATM_GETPOOLZ) {

drivers/block/rbd.c

@@ -2366,7 +2366,9 @@ static int rbd_obj_issue_copyup(struct rbd_obj_request *obj_req, u32 bytes)
 	osd_req_op_cls_init(obj_req->osd_req, 0, CEPH_OSD_OP_CALL, "rbd",
 			    "copyup");
 	osd_req_op_cls_request_data_bvecs(obj_req->osd_req, 0,
-					  obj_req->copyup_bvecs, bytes);
+					  obj_req->copyup_bvecs,
+					  obj_req->copyup_bvec_count,
+					  bytes);
 
 	switch (obj_req->img_request->op_type) {
 	case OBJ_OP_WRITE:

drivers/bluetooth/btusb.c

@@ -231,6 +231,7 @@ static const struct usb_device_id blacklist_table[] = {
 	{ USB_DEVICE(0x0930, 0x0227), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0b05, 0x17d0), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0x0036), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0x3008), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0x311d), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0x311e), .driver_info = BTUSB_ATH3012 },
@@ -263,7 +264,6 @@ static const struct usb_device_id blacklist_table[] = {
 	{ USB_DEVICE(0x0489, 0xe03c), .driver_info = BTUSB_ATH3012 },
 
 	/* QCA ROME chipset */
-	{ USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_QCA_ROME },
 	{ USB_DEVICE(0x0cf3, 0xe007), .driver_info = BTUSB_QCA_ROME },
 	{ USB_DEVICE(0x0cf3, 0xe009), .driver_info = BTUSB_QCA_ROME },
 	{ USB_DEVICE(0x0cf3, 0xe010), .driver_info = BTUSB_QCA_ROME },
@@ -399,6 +399,13 @@ static const struct dmi_system_id btusb_needs_reset_resume_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 3060"),
 		},
 	},
+	{
+		/* Dell XPS 9360 (QCA ROME device 0cf3:e300) */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "XPS 13 9360"),
+		},
+	},
 	{}
 };
 
@@ -2852,6 +2859,12 @@ static int btusb_config_oob_wake(struct hci_dev *hdev)
 }
 #endif
 
+static void btusb_check_needs_reset_resume(struct usb_interface *intf)
+{
+	if (dmi_check_system(btusb_needs_reset_resume_table))
+		interface_to_usbdev(intf)->quirks |= USB_QUIRK_RESET_RESUME;
+}
+
 static int btusb_probe(struct usb_interface *intf,
 		       const struct usb_device_id *id)
 {
@@ -2974,9 +2987,6 @@ static int btusb_probe(struct usb_interface *intf,
 	hdev->send   = btusb_send_frame;
 	hdev->notify = btusb_notify;
 
-	if (dmi_check_system(btusb_needs_reset_resume_table))
-		interface_to_usbdev(intf)->quirks |= USB_QUIRK_RESET_RESUME;
-
 #ifdef CONFIG_PM
 	err = btusb_config_oob_wake(hdev);
 	if (err)
@@ -3064,6 +3074,7 @@ static int btusb_probe(struct usb_interface *intf,
 		data->setup_on_usb = btusb_setup_qca;
 		hdev->set_bdaddr = btusb_set_bdaddr_ath3012;
 		set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
+		btusb_check_needs_reset_resume(intf);
 	}
 
 #ifdef CONFIG_BT_HCIBTUSB_RTL

drivers/char/agp/uninorth-agp.c

@@ -195,7 +195,7 @@ static int uninorth_insert_memory(struct agp_memory *mem, off_t pg_start, int ty
 	return 0;
 }
 
-int uninorth_remove_memory(struct agp_memory *mem, off_t pg_start, int type)
+static int uninorth_remove_memory(struct agp_memory *mem, off_t pg_start, int type)
 {
 	size_t i;
 	u32 *gp;
@@ -470,7 +470,7 @@ static int uninorth_free_gatt_table(struct agp_bridge_data *bridge)
 	return 0;
 }
 
-void null_cache_flush(void)
+static void null_cache_flush(void)
 {
 	mb();
 }

drivers/clk/Kconfig

@@ -266,15 +266,13 @@ config COMMON_CLK_STM32MP157
 	  Support for stm32mp157 SoC family clocks
 
 config COMMON_CLK_STM32F
-	bool "Clock driver for stm32f4 and stm32f7 SoC families"
-	depends on MACH_STM32F429 || MACH_STM32F469 || MACH_STM32F746
+	def_bool COMMON_CLK && (MACH_STM32F429 || MACH_STM32F469 || MACH_STM32F746)
 	help
 	---help---
 	  Support for stm32f4 and stm32f7 SoC families clocks
 
 config COMMON_CLK_STM32H7
-	bool "Clock driver for stm32h7 SoC family"
-	depends on MACH_STM32H743
+	def_bool COMMON_CLK && MACH_STM32H743
 	help
 	---help---
 	  Support for stm32h7 SoC family clocks

drivers/clk/imx/clk-imx6ul.c

@@ -464,7 +464,7 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node)
 	clk_set_rate(clks[IMX6UL_CLK_AHB], 99000000);
 
 	/* Change periph_pre clock to pll2_bus to adjust AXI rate to 264MHz */
-	clk_set_parent(clks[IMX6UL_CLK_PERIPH_CLK2_SEL], clks[IMX6UL_CLK_PLL3_USB_OTG]);
+	clk_set_parent(clks[IMX6UL_CLK_PERIPH_CLK2_SEL], clks[IMX6UL_CLK_OSC]);
 	clk_set_parent(clks[IMX6UL_CLK_PERIPH], clks[IMX6UL_CLK_PERIPH_CLK2]);
 	clk_set_parent(clks[IMX6UL_CLK_PERIPH_PRE], clks[IMX6UL_CLK_PLL2_BUS]);
 	clk_set_parent(clks[IMX6UL_CLK_PERIPH], clks[IMX6UL_CLK_PERIPH_PRE]);

drivers/cpufreq/Kconfig.arm

@@ -20,7 +20,7 @@ config ACPI_CPPC_CPUFREQ
 
 config ARM_ARMADA_37XX_CPUFREQ
 	tristate "Armada 37xx CPUFreq support"
-	depends on ARCH_MVEBU
+	depends on ARCH_MVEBU && CPUFREQ_DT
 	help
 	  This adds the CPUFreq driver support for Marvell Armada 37xx SoCs.
 	  The Armada 37xx PMU supports 4 frequency and VDD levels.

drivers/gpio/gpio-aspeed.c

@@ -384,7 +384,7 @@ static void aspeed_gpio_irq_set_mask(struct irq_data *d, bool set)
 	if (set)
 		reg |= bit;
 	else
-		reg &= bit;
+		reg &= ~bit;
 	iowrite32(reg, addr);
 
 	spin_unlock_irqrestore(&gpio->lock, flags);

drivers/gpio/gpio-pci-idio-16.c

@@ -116,9 +116,9 @@ static int idio_16_gpio_get_multiple(struct gpio_chip *chip,
 	unsigned long word_mask;
 	const unsigned long port_mask = GENMASK(gpio_reg_size - 1, 0);
 	unsigned long port_state;
-	u8 __iomem ports[] = {
-		idio16gpio->reg->out0_7, idio16gpio->reg->out8_15,
-		idio16gpio->reg->in0_7, idio16gpio->reg->in8_15,
+	void __iomem *ports[] = {
+		&idio16gpio->reg->out0_7, &idio16gpio->reg->out8_15,
+		&idio16gpio->reg->in0_7, &idio16gpio->reg->in8_15,
 	};
 
 	/* clear bits array to a clean slate */
@@ -143,7 +143,7 @@ static int idio_16_gpio_get_multiple(struct gpio_chip *chip,
 		}
 
 		/* read bits from current gpio port */
-		port_state = ioread8(ports + i);
+		port_state = ioread8(ports[i]);
 
 		/* store acquired bits at respective bits array offset */
 		bits[word_index] |= port_state << word_offset;

drivers/gpio/gpio-pcie-idio-24.c

@@ -206,10 +206,10 @@ static int idio_24_gpio_get_multiple(struct gpio_chip *chip,
 	unsigned long word_mask;
 	const unsigned long port_mask = GENMASK(gpio_reg_size - 1, 0);
 	unsigned long port_state;
-	u8 __iomem ports[] = {
-		idio24gpio->reg->out0_7, idio24gpio->reg->out8_15,
-		idio24gpio->reg->out16_23, idio24gpio->reg->in0_7,
-		idio24gpio->reg->in8_15, idio24gpio->reg->in16_23,
+	void __iomem *ports[] = {
+		&idio24gpio->reg->out0_7, &idio24gpio->reg->out8_15,
+		&idio24gpio->reg->out16_23, &idio24gpio->reg->in0_7,
+		&idio24gpio->reg->in8_15, &idio24gpio->reg->in16_23,
 	};
 	const unsigned long out_mode_mask = BIT(1);
 
@@ -217,7 +217,7 @@ static int idio_24_gpio_get_multiple(struct gpio_chip *chip,
 	bitmap_zero(bits, chip->ngpio);
 
 	/* get bits are evaluated a gpio port register at a time */
-	for (i = 0; i < ARRAY_SIZE(ports); i++) {
+	for (i = 0; i < ARRAY_SIZE(ports) + 1; i++) {
 		/* gpio offset in bits array */
 		bits_offset = i * gpio_reg_size;
 
@@ -236,7 +236,7 @@ static int idio_24_gpio_get_multiple(struct gpio_chip *chip,
 
 		/* read bits from current gpio port (port 6 is TTL GPIO) */
 		if (i < 6)
-			port_state = ioread8(ports + i);
+			port_state = ioread8(ports[i]);
 		else if (ioread8(&idio24gpio->reg->ctl) & out_mode_mask)
 			port_state = ioread8(&idio24gpio->reg->ttl_out0_7);
 		else
@@ -301,9 +301,9 @@ static void idio_24_gpio_set_multiple(struct gpio_chip *chip,
 	const unsigned long port_mask = GENMASK(gpio_reg_size, 0);
 	unsigned long flags;
 	unsigned int out_state;
-	u8 __iomem ports[] = {
-		idio24gpio->reg->out0_7, idio24gpio->reg->out8_15,
-		idio24gpio->reg->out16_23
+	void __iomem *ports[] = {
+		&idio24gpio->reg->out0_7, &idio24gpio->reg->out8_15,
+		&idio24gpio->reg->out16_23
 	};
 	const unsigned long out_mode_mask = BIT(1);
 	const unsigned int ttl_offset = 48;
@@ -327,9 +327,9 @@ static void idio_24_gpio_set_multiple(struct gpio_chip *chip,
 		raw_spin_lock_irqsave(&idio24gpio->lock, flags);
 
 		/* process output lines */
-		out_state = ioread8(ports + i) & ~gpio_mask;
+		out_state = ioread8(ports[i]) & ~gpio_mask;
 		out_state |= (*bits >> bits_offset) & gpio_mask;
-		iowrite8(out_state, ports + i);
+		iowrite8(out_state, ports[i]);
 
 		raw_spin_unlock_irqrestore(&idio24gpio->lock, flags);
 	}

drivers/gpio/gpiolib.c

@@ -497,7 +497,7 @@ static int linehandle_create(struct gpio_device *gdev, void __user *ip)
 	struct gpiohandle_request handlereq;
 	struct linehandle_state *lh;
 	struct file *file;
-	int fd, i, ret;
+	int fd, i, count = 0, ret;
 	u32 lflags;
 
 	if (copy_from_user(&handlereq, ip, sizeof(handlereq)))
@@ -558,6 +558,7 @@ static int linehandle_create(struct gpio_device *gdev, void __user *ip)
 		if (ret)
 			goto out_free_descs;
 		lh->descs[i] = desc;
+		count = i;
 
 		if (lflags & GPIOHANDLE_REQUEST_ACTIVE_LOW)
 			set_bit(FLAG_ACTIVE_LOW, &desc->flags);
@@ -628,7 +629,7 @@ static int linehandle_create(struct gpio_device *gdev, void __user *ip)
 out_put_unused_fd:
 	put_unused_fd(fd);
 out_free_descs:
-	for (; i >= 0; i--)
+	for (i = 0; i < count; i++)
 		gpiod_free(lh->descs[i]);
 	kfree(lh->label);
 out_free_lh:
@@ -902,7 +903,7 @@ static int lineevent_create(struct gpio_device *gdev, void __user *ip)
 	desc = &gdev->descs[offset];
 	ret = gpiod_request(desc, le->label);
 	if (ret)
-		goto out_free_desc;
+		goto out_free_label;
 	le->desc = desc;
 	le->eflags = eflags;
 

drivers/gpu/drm/amd/amdgpu/amdgpu_ctx.c

@@ -419,9 +419,11 @@ int amdgpu_ctx_wait_prev_fence(struct amdgpu_ctx *ctx, unsigned ring_id)
 
 	if (other) {
 		signed long r;
-		r = dma_fence_wait_timeout(other, false, MAX_SCHEDULE_TIMEOUT);
+		r = dma_fence_wait(other, true);
 		if (r < 0) {
-			DRM_ERROR("Error (%ld) waiting for fence!\n", r);
+			if (r != -ERESTARTSYS)
+				DRM_ERROR("Error (%ld) waiting for fence!\n", r);
+
 			return r;
 		}
 	}

drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c

@@ -83,21 +83,22 @@ static ssize_t dm_dp_aux_transfer(struct drm_dp_aux *aux,
 	enum i2c_mot_mode mot = (msg->request & DP_AUX_I2C_MOT) ?
 		I2C_MOT_TRUE : I2C_MOT_FALSE;
 	enum ddc_result res;
-	ssize_t read_bytes;
+	uint32_t read_bytes = msg->size;
 
 	if (WARN_ON(msg->size > 16))
 		return -E2BIG;
 
 	switch (msg->request & ~DP_AUX_I2C_MOT) {
 	case DP_AUX_NATIVE_READ:
-		read_bytes = dal_ddc_service_read_dpcd_data(
+		res = dal_ddc_service_read_dpcd_data(
 				TO_DM_AUX(aux)->ddc_service,
 				false,
 				I2C_MOT_UNDEF,
 				msg->address,
 				msg->buffer,
-				msg->size);
-		return read_bytes;
+				msg->size,
+				&read_bytes);
+		break;
 	case DP_AUX_NATIVE_WRITE:
 		res = dal_ddc_service_write_dpcd_data(
 				TO_DM_AUX(aux)->ddc_service,
@@ -108,14 +109,15 @@ static ssize_t dm_dp_aux_transfer(struct drm_dp_aux *aux,
 				msg->size);
 		break;
 	case DP_AUX_I2C_READ:
-		read_bytes = dal_ddc_service_read_dpcd_data(
+		res = dal_ddc_service_read_dpcd_data(
 				TO_DM_AUX(aux)->ddc_service,
 				true,
 				mot,
 				msg->address,
 				msg->buffer,
-				msg->size);
-		return read_bytes;
+				msg->size,
+				&read_bytes);
+		break;
 	case DP_AUX_I2C_WRITE:
 		res = dal_ddc_service_write_dpcd_data(
 				TO_DM_AUX(aux)->ddc_service,
@@ -137,7 +139,9 @@ static ssize_t dm_dp_aux_transfer(struct drm_dp_aux *aux,
 		 r == DDC_RESULT_SUCESSFULL);
 #endif
 
-	return msg->size;
+	if (res != DDC_RESULT_SUCESSFULL)
+		return -EIO;
+	return read_bytes;
 }
 
 static enum drm_connector_status

drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c

@@ -70,6 +70,10 @@ static enum bp_result get_firmware_info_v3_1(
 	struct bios_parser *bp,
 	struct dc_firmware_info *info);
 
+static enum bp_result get_firmware_info_v3_2(
+	struct bios_parser *bp,
+	struct dc_firmware_info *info);
+
 static struct atom_hpd_int_record *get_hpd_record(struct bios_parser *bp,
 		struct atom_display_object_path_v2 *object);
 
@@ -1321,9 +1325,11 @@ static enum bp_result bios_parser_get_firmware_info(
 		case 3:
 			switch (revision.minor) {
 			case 1:
-			case 2:
 				result = get_firmware_info_v3_1(bp, info);
 				break;
+			case 2:
+				result = get_firmware_info_v3_2(bp, info);
+				break;
 			default:
 				break;
 			}
@@ -1383,6 +1389,84 @@ static enum bp_result get_firmware_info_v3_1(
 	return BP_RESULT_OK;
 }
 
+static enum bp_result get_firmware_info_v3_2(
+	struct bios_parser *bp,
+	struct dc_firmware_info *info)
+{
+	struct atom_firmware_info_v3_2 *firmware_info;
+	struct atom_display_controller_info_v4_1 *dce_info = NULL;
+	struct atom_common_table_header *header;
+	struct atom_data_revision revision;
+	struct atom_smu_info_v3_2 *smu_info_v3_2 = NULL;
+	struct atom_smu_info_v3_3 *smu_info_v3_3 = NULL;
+
+	if (!info)
+		return BP_RESULT_BADINPUT;
+
+	firmware_info = GET_IMAGE(struct atom_firmware_info_v3_2,
+			DATA_TABLES(firmwareinfo));
+
+	dce_info = GET_IMAGE(struct atom_display_controller_info_v4_1,
+			DATA_TABLES(dce_info));
+
+	if (!firmware_info || !dce_info)
+		return BP_RESULT_BADBIOSTABLE;
+
+	memset(info, 0, sizeof(*info));
+
+	header = GET_IMAGE(struct atom_common_table_header,
+					DATA_TABLES(smu_info));
+	get_atom_data_table_revision(header, &revision);
+
+	if (revision.minor == 2) {
+		/* Vega12 */
+		smu_info_v3_2 = GET_IMAGE(struct atom_smu_info_v3_2,
+							DATA_TABLES(smu_info));
+
+		if (!smu_info_v3_2)
+			return BP_RESULT_BADBIOSTABLE;
+
+		info->default_engine_clk = smu_info_v3_2->bootup_dcefclk_10khz * 10;
+	} else if (revision.minor == 3) {
+		/* Vega20 */
+		smu_info_v3_3 = GET_IMAGE(struct atom_smu_info_v3_3,
+							DATA_TABLES(smu_info));
+
+		if (!smu_info_v3_3)
+			return BP_RESULT_BADBIOSTABLE;
+
+		info->default_engine_clk = smu_info_v3_3->bootup_dcefclk_10khz * 10;
+	}
+
+	 // We need to convert from 10KHz units into KHz units.
+	info->default_memory_clk = firmware_info->bootup_mclk_in10khz * 10;
+
+	 /* 27MHz for Vega10 & Vega12; 100MHz for Vega20 */
+	info->pll_info.crystal_frequency = dce_info->dce_refclk_10khz * 10;
+	/* Hardcode frequency if BIOS gives no DCE Ref Clk */
+	if (info->pll_info.crystal_frequency == 0) {
+		if (revision.minor == 2)
+			info->pll_info.crystal_frequency = 27000;
+		else if (revision.minor == 3)
+			info->pll_info.crystal_frequency = 100000;
+	}
+	/*dp_phy_ref_clk is not correct for atom_display_controller_info_v4_2, but we don't use it*/
+	info->dp_phy_ref_clk     = dce_info->dpphy_refclk_10khz * 10;
+	info->i2c_engine_ref_clk = dce_info->i2c_engine_refclk_10khz * 10;
+
+	/* Get GPU PLL VCO Clock */
+	if (bp->cmd_tbl.get_smu_clock_info != NULL) {
+		if (revision.minor == 2)
+			info->smu_gpu_pll_output_freq =
+					bp->cmd_tbl.get_smu_clock_info(bp, SMU9_SYSPLL0_ID) * 10;
+		else if (revision.minor == 3)
+			info->smu_gpu_pll_output_freq =
+					bp->cmd_tbl.get_smu_clock_info(bp, SMU11_SYSPLL3_0_ID) * 10;
+	}
+
+	return BP_RESULT_OK;
+}
+
 static enum bp_result bios_parser_get_encoder_cap_info(
 	struct dc_bios *dcb,
 	struct graphics_object_id object_id,