Merge branch 'v4.9-rc2-arm-configs-pata' of https://github.com/bzolnier/linux into next/defconfig

Merge "IDE to PATA change in ARM defconfigs from Bartlomiej Zolnierkiewicz:

On Monday, October 31, 2016 07:14:13 PM Bartlomiej Zolnierkiewicz wrote:
> On Monday, October 31, 2016 03:46:22 PM Russell King - ARM Linux wrote:
> > On Wed, Oct 26, 2016 at 07:01:12PM +0200, Bartlomiej Zolnierkiewicz wrote:
> > > On Wednesday, July 13, 2016 04:37:31 PM Arnd Bergmann wrote:
> > > > I'd be fine with just getting a pull request with all the patches that
> > > > had no negative feedback and that were not already applied (if any).
> > >
> > > Here it is (sorry for taking so long).
> >
> > I've just been digging in the dmesg logs from when I was using the
> > Assabet+Neponset as my firewall, and it was having to use the IDE
> > ide-cs driver rather than the pata pcmcia driver.
> >
> > I don't recall whether the pata pcmcia driver was a problem or not,
> > as the PCMCIA interface can't cope with _any_ 32-bit accesses.  I
> > think PATA tries to use the "highest" possible access size by
> > default...
>
> It doesn't actually - it defaults to 16-bits for PIO data access and
> you must explicitly enable 32-bits using ATA_PFLAG_PIO32 port flag
> (pata_pcmcia doesn't set it so it should be okay).  Also taskfile
> registers are accessed using 8-bits access by default transport
> functions (which are used by pata_pcmcia).

Please also note that:

- assebet_defconfig currently doesn't even enable ide-cs
  (CONFIG_BLK_DEV_IDECS) in the mainline kernel

- neponset_defconfig doesn't even enable IDE (CONFIG_IDE)
  in the mainline kernel

so there is no risk of breaking anything..

* 'v4.9-rc2-arm-configs-pata' of https://github.com/bzolnier/linux:
  arm: spitz_defconfig: convert to use libata PATA drivers
  arm: s3c2410_defconfig: convert to use libata PATA drivers
  arm: netwinder_defconfig: convert to use libata PATA drivers
  arm: jornada720_defconfig: convert to use libata PATA drivers
  arm: ixp4xx_defconfig: convert to use libata PATA drivers
  arm: h3600_defconfig: convert to use libata PATA drivers
  arm: corgi_defconfig: convert to use libata PATA drivers
  arm: am200epdkit_defconfig: convert to use libata PATA drivers
  arm: omap1_defconfig: convert to use libata PATA drivers
  arm: collie_defconfig: convert to use libata PATA drivers
  arm: shannon_defconfig: disable IDE subsystem
  arm: mainstone_defconfig: disable IDE subsystem
  arm: lart_defconfig: disable IDE subsystem
  arm: cerfcube_defconfig: disable IDE subsystem
  arm: badge4_defconfig: disable IDE subsystem
  arm: assabet_defconfig: disable IDE subsystem

arch/arm/configs/am200epdkit_defconfig

@@ -55,8 +55,9 @@ CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_PXA2XX=y
 CONFIG_BLK_DEV_LOOP=m
-CONFIG_IDE=m
-CONFIG_BLK_DEV_IDECS=m
+CONFIG_BLK_DEV_SD=m
+CONFIG_ATA=m
+CONFIG_PATA_PCMCIA=m
 CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y
 CONFIG_SMC91X=m

arch/arm/configs/assabet_defconfig

@@ -34,7 +34,6 @@ CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_SA1100=y
 CONFIG_BLK_DEV_LOOP=m
 CONFIG_BLK_DEV_RAM=y
-CONFIG_IDE=y
 CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y
 CONFIG_NET_PCMCIA=y

arch/arm/configs/badge4_defconfig

@@ -42,8 +42,6 @@ CONFIG_MTD_SA1100=y
 CONFIG_PARPORT=m
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_NBD=m
-CONFIG_IDE=m
-CONFIG_BLK_DEV_IDECD=m
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=m

arch/arm/configs/cerfcube_defconfig

@@ -39,7 +39,6 @@ CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_SA1100=y
 CONFIG_BLK_DEV_LOOP=m
 CONFIG_BLK_DEV_RAM=m
-CONFIG_IDE=y
 CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y
 CONFIG_NET_PCI=y

arch/arm/configs/collie_defconfig

@@ -43,8 +43,9 @@ CONFIG_MTD_SA1100=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=1024
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECS=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_ATA=y
+CONFIG_PATA_PCMCIA=y
 # CONFIG_INPUT_MOUSEDEV is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_KEYBOARD_ATKBD is not set

arch/arm/configs/corgi_defconfig

@@ -99,15 +99,14 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_SHARPSL=y
 CONFIG_BLK_DEV_LOOP=y
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECS=y
-CONFIG_SCSI=m
-CONFIG_BLK_DEV_SD=m
+CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=m
 CONFIG_CHR_DEV_OSST=m
 CONFIG_BLK_DEV_SR=m
 CONFIG_CHR_DEV_SG=m
 CONFIG_SCSI_MULTI_LUN=y
+CONFIG_ATA=y
+CONFIG_PATA_PCMCIA=y
 CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y
 CONFIG_USB_CATC=m

arch/arm/configs/h3600_defconfig

@@ -39,8 +39,9 @@ CONFIG_MTD_SA1100=y
 CONFIG_BLK_DEV_LOOP=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECS=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_ATA=y
+CONFIG_PATA_PCMCIA=y
 CONFIG_NETDEVICES=y
 CONFIG_PCMCIA_PCNET=y
 CONFIG_PPP=m

arch/arm/configs/ixp4xx_defconfig

@@ -127,16 +127,17 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=8192
 CONFIG_EEPROM_LEGACY=y
-CONFIG_IDE=y
-CONFIG_BLK_DEV_CMD64X=y
-CONFIG_BLK_DEV_HPT366=y
-CONFIG_BLK_DEV_PDC202XX_NEW=y
 # CONFIG_SCSI_PROC_FS is not set
 CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_ATA=y
 CONFIG_SATA_VIA=y
 CONFIG_PATA_ARTOP=y
+CONFIG_PATA_CMD64X=y
+CONFIG_PATA_HPT366=y
+CONFIG_PATA_HPT37X=y
+CONFIG_PATA_HPT3X2N=y
+CONFIG_PATA_PDC2027X=y
 CONFIG_PATA_IXP4XX_CF=y
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y

arch/arm/configs/jornada720_defconfig

@@ -29,8 +29,9 @@ CONFIG_SA1100_FIR=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_NBD=y
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECS=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_ATA=y
+CONFIG_PATA_PCMCIA=y
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
 CONFIG_NET_ETHERNET=y

arch/arm/configs/lart_defconfig

@@ -36,8 +36,6 @@ CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_LART=y
 CONFIG_BLK_DEV_RAM=y
-CONFIG_IDE=m
-CONFIG_BLK_DEV_IDECD=m
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
 CONFIG_NET_ETHERNET=y

arch/arm/configs/mainstone_defconfig

@@ -27,7 +27,6 @@ CONFIG_MTD_CFI_ADV_OPTIONS=y
 CONFIG_MTD_CFI_GEOMETRY=y
 # CONFIG_MTD_CFI_I1 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_IDE=y
 CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y
 CONFIG_SMC91X=y

arch/arm/configs/netwinder_defconfig

@@ -8,7 +8,7 @@ CONFIG_LEDS_CPU=y
 CONFIG_DEPRECATED_PARAM_STRUCT=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=0x301"
+CONFIG_CMDLINE="root=0x801"
 CONFIG_FPE_NWFPE=y
 CONFIG_BINFMT_AOUT=y
 CONFIG_NET=y
@@ -27,8 +27,9 @@ CONFIG_PARPORT=y
 CONFIG_PARPORT_PC=y
 CONFIG_PARPORT_PC_SUPERIO=y
 CONFIG_BLK_DEV_LOOP=y
-CONFIG_IDE=y
-CONFIG_BLK_DEV_SL82C105=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_ATA=y
+CONFIG_PATA_WINBOND=y
 CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y

arch/arm/configs/omap1_defconfig

@@ -96,14 +96,14 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=2
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_IDE=m
-CONFIG_BLK_DEV_IDECS=m
 CONFIG_SCSI=y
 # CONFIG_SCSI_PROC_FS is not set
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=y
 CONFIG_BLK_DEV_SR=y
 CONFIG_CHR_DEV_SG=y
+CONFIG_ATA=m
+CONFIG_PATA_PCMCIA=m
 CONFIG_NETDEVICES=y
 CONFIG_TUN=y
 CONFIG_PHYLIB=y

arch/arm/configs/s3c2410_defconfig

@@ -219,20 +219,16 @@ CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_UB=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_ATA_OVER_ETH=m
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_IDETAPE=m
-CONFIG_BLK_DEV_PLATFORM=y
-CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=m
-CONFIG_BLK_DEV_SR=m
+CONFIG_BLK_DEV_SR=y
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=y
 CONFIG_CHR_DEV_SCH=m
-CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_ATA=y
+CONFIG_PATA_PLATFORM=y
 CONFIG_NETDEVICES=y
 CONFIG_DM9000=y
 CONFIG_INPUT_EVDEV=y

arch/arm/configs/shannon_defconfig

@@ -25,7 +25,6 @@ CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_SA1100=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_IDE=m
 CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y
 CONFIG_NET_PCMCIA=y

arch/arm/configs/spitz_defconfig

@@ -96,15 +96,13 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_SHARPSL=y
 CONFIG_BLK_DEV_LOOP=y
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECS=y
-CONFIG_SCSI=m
-CONFIG_BLK_DEV_SD=m
+CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=m
 CONFIG_CHR_DEV_OSST=m
 CONFIG_BLK_DEV_SR=m
 CONFIG_CHR_DEV_SG=m
-CONFIG_SCSI_MULTI_LUN=y
+CONFIG_ATA=y
+CONFIG_PATA_PCMCIA=y
 CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y
 CONFIG_USB_CATC=m