iio: accel: bma180: Add support for BMA250E

The BMA250E adds a new fifo mode and is fully backwards compatible
with the BMA250, but with a different chip-id.

This commit adds support for it by adjusting the chip-id check and
otherwise treating it as a regular BMA250.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

drivers/iio/accel/bma180.c

@@ -36,6 +36,7 @@
 enum chip_ids {
 	BMA180,
 	BMA250,
+	BMA250E,
 };
 
 struct bma180_data;
@@ -55,6 +56,7 @@ struct bma180_part_info {
 	u8 power_reg, power_mask, lowpower_val;
 	u8 int_enable_reg, int_enable_mask;
 	u8 softreset_reg;
+	u8 chip_id;
 
 	int (*chip_config)(struct bma180_data *data);
 	void (*chip_disable)(struct bma180_data *data);
@@ -112,6 +114,8 @@ struct bma180_part_info {
 #define BMA250_INT1_DATA_MASK	BIT(0)
 #define BMA250_INT_RESET_MASK	BIT(7) /* Reset pending interrupts */
 
+#define BMA250E_CHIP_ID		0xf9
+
 struct bma180_data {
 	struct i2c_client *client;
 	struct iio_trigger *trig;
@@ -309,7 +313,7 @@ static int bma180_chip_init(struct bma180_data *data)
 
 	if (ret < 0)
 		return ret;
-	if (ret != BMA180_ID_REG_VAL)
+	if (ret != data->part_info->chip_id)
 		return -ENODEV;
 
 	ret = bma180_soft_reset(data);
@@ -632,6 +636,7 @@ static const struct bma180_part_info bma180_part_info[] = {
 		BMA180_TCO_Z, BMA180_MODE_CONFIG, BMA180_LOW_POWER,
 		BMA180_CTRL_REG3, BMA180_NEW_DATA_INT,
 		BMA180_RESET,
+		BMA180_CHIP_ID,
 		bma180_chip_config,
 		bma180_chip_disable,
 	},
@@ -646,6 +651,22 @@ static const struct bma180_part_info bma180_part_info[] = {
 		BMA250_POWER_REG, BMA250_LOWPOWER_MASK, 1,
 		BMA250_INT_ENABLE_REG, BMA250_DATA_INTEN_MASK,
 		BMA250_RESET_REG,
+		BMA180_CHIP_ID,
+		bma250_chip_config,
+		bma250_chip_disable,
+	},
+	[BMA250E] = {
+		bma250_channels, ARRAY_SIZE(bma250_channels),
+		bma250_scale_table, ARRAY_SIZE(bma250_scale_table),
+		bma250_bw_table, ARRAY_SIZE(bma250_bw_table),
+		BMA250_INT_RESET_REG, BMA250_INT_RESET_MASK,
+		BMA250_POWER_REG, BMA250_SUSPEND_MASK,
+		BMA250_BW_REG, BMA250_BW_MASK,
+		BMA250_RANGE_REG, BMA250_RANGE_MASK,
+		BMA250_POWER_REG, BMA250_LOWPOWER_MASK, 1,
+		BMA250_INT_ENABLE_REG, BMA250_DATA_INTEN_MASK,
+		BMA250_RESET_REG,
+		BMA250E_CHIP_ID,
 		bma250_chip_config,
 		bma250_chip_disable,
 	},
@@ -845,6 +866,7 @@ static SIMPLE_DEV_PM_OPS(bma180_pm_ops, bma180_suspend, bma180_resume);
 static struct i2c_device_id bma180_ids[] = {
 	{ "bma180", BMA180 },
 	{ "bma250", BMA250 },
+	{ "bma250e", BMA250E },
 	{ }
 };