usb: allow to supply the PHY in the drivers when using HCD

This patch modify the generic code handling PHYs to allow them to be
supplied from the drivers. This adds checks to ensure no PHY was already
there when looking for one in the generic code. This also makes sure we
do not modify its state in the generic HCD functions, it was provided by
the driver.

Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Felipe Balbi <balbi@ti.com>

drivers/usb/chipidea/ci.h

@@ -161,7 +161,7 @@ struct hw_bank {
  * @test_mode: the selected test mode
  * @platdata: platform specific information supplied by parent device
  * @vbus_active: is VBUS active
- * @transceiver: pointer to USB PHY, if any
+ * @usb_phy: pointer to USB PHY, if any
  * @hcd: pointer to usb_hcd for ehci host driver
  * @debugfs: root dentry for this controller in debugfs
  * @id_event: indicates there is an id event, and handled at ci_otg_work
@@ -177,6 +177,7 @@ struct ci_hdrc {
 	struct ci_role_driver		*roles[CI_ROLE_END];
 	enum ci_role			role;
 	bool				is_otg;
+	struct usb_otg			otg;
 	struct otg_fsm			fsm;
 	struct ci_otg_fsm_timer_list	*fsm_timer;
 	struct work_struct		work;
@@ -201,7 +202,7 @@ struct ci_hdrc {
 
 	struct ci_hdrc_platform_data	*platdata;
 	int				vbus_active;
-	struct usb_phy			*transceiver;
+	struct usb_phy			*usb_phy;
 	struct usb_hcd			*hcd;
 	struct dentry			*debugfs;
 	bool				id_event;

drivers/usb/chipidea/ci_hdrc_imx.c

@@ -147,7 +147,7 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)
 		goto err_clk;
 	}
 
-	pdata.phy = data->phy;
+	pdata.usb_phy = data->phy;
 
 	if (imx_platform_flag->flags & CI_HDRC_IMX_IMX28_WRITE_FIX)
 		pdata.flags |= CI_HDRC_IMX28_WRITE_FIX;

drivers/usb/chipidea/ci_hdrc_msm.c

@@ -26,15 +26,15 @@ static void ci_hdrc_msm_notify_event(struct ci_hdrc *ci, unsigned event)
 		dev_dbg(dev, "CI_HDRC_CONTROLLER_RESET_EVENT received\n");
 		writel(0, USB_AHBBURST);
 		writel(0, USB_AHBMODE);
-		usb_phy_init(ci->transceiver);
+		usb_phy_init(ci->usb_phy);
 		break;
 	case CI_HDRC_CONTROLLER_STOPPED_EVENT:
 		dev_dbg(dev, "CI_HDRC_CONTROLLER_STOPPED_EVENT received\n");
 		/*
-		 * Put the transceiver in non-driving mode. Otherwise host
+		 * Put the phy in non-driving mode. Otherwise host
 		 * may not detect soft-disconnection.
 		 */
-		usb_phy_notify_disconnect(ci->transceiver, USB_SPEED_UNKNOWN);
+		usb_phy_notify_disconnect(ci->usb_phy, USB_SPEED_UNKNOWN);
 		break;
 	default:
 		dev_dbg(dev, "unknown ci_hdrc event\n");
@@ -68,7 +68,7 @@ static int ci_hdrc_msm_probe(struct platform_device *pdev)
 	if (IS_ERR(phy))
 		return PTR_ERR(phy);
 
-	ci_hdrc_msm_platdata.phy = phy;
+	ci_hdrc_msm_platdata.usb_phy = phy;
 
 	plat_ci = ci_hdrc_add_device(&pdev->dev,
 				pdev->resource, pdev->num_resources,

drivers/usb/chipidea/core.c

@@ -312,7 +312,7 @@ static int ci_usb_phy_init(struct ci_hdrc *ci)
 	case USBPHY_INTERFACE_MODE_UTMI:
 	case USBPHY_INTERFACE_MODE_UTMIW:
 	case USBPHY_INTERFACE_MODE_HSIC:
-		ret = usb_phy_init(ci->transceiver);
+		ret = usb_phy_init(ci->usb_phy);
 		if (ret)
 			return ret;
 		hw_phymode_configure(ci);
@@ -320,12 +320,12 @@ static int ci_usb_phy_init(struct ci_hdrc *ci)
 	case USBPHY_INTERFACE_MODE_ULPI:
 	case USBPHY_INTERFACE_MODE_SERIAL:
 		hw_phymode_configure(ci);
-		ret = usb_phy_init(ci->transceiver);
+		ret = usb_phy_init(ci->usb_phy);
 		if (ret)
 			return ret;
 		break;
 	default:
-		ret = usb_phy_init(ci->transceiver);
+		ret = usb_phy_init(ci->usb_phy);
 	}
 
 	return ret;
@@ -605,13 +605,13 @@ static int ci_hdrc_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
-	if (ci->platdata->phy)
-		ci->transceiver = ci->platdata->phy;
+	if (ci->platdata->usb_phy)
+		ci->usb_phy = ci->platdata->usb_phy;
 	else
-		ci->transceiver = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
+		ci->usb_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
 
-	if (IS_ERR(ci->transceiver)) {
-		ret = PTR_ERR(ci->transceiver);
+	if (IS_ERR(ci->usb_phy)) {
+		ret = PTR_ERR(ci->usb_phy);
 		/*
 		 * if -ENXIO is returned, it means PHY layer wasn't
 		 * enabled, so it makes no sense to return -EPROBE_DEFER
@@ -728,7 +728,7 @@ static int ci_hdrc_probe(struct platform_device *pdev)
 stop:
 	ci_role_destroy(ci);
 deinit_phy:
-	usb_phy_shutdown(ci->transceiver);
+	usb_phy_shutdown(ci->usb_phy);
 
 	return ret;
 }
@@ -741,7 +741,7 @@ static int ci_hdrc_remove(struct platform_device *pdev)
 	free_irq(ci->irq, ci);
 	ci_role_destroy(ci);
 	ci_hdrc_enter_lpm(ci, true);
-	usb_phy_shutdown(ci->transceiver);
+	usb_phy_shutdown(ci->usb_phy);
 
 	return 0;
 }

drivers/usb/chipidea/debug.c

@@ -220,7 +220,7 @@ static int ci_otg_show(struct seq_file *s, void *unused)
 
 	/* ------ State ----- */
 	seq_printf(s, "OTG state: %s\n\n",
-		usb_otg_state_string(ci->transceiver->otg->state));
+			usb_otg_state_string(ci->otg.state));
 
 	/* ------ State Machine Variables ----- */
 	seq_printf(s, "a_bus_drop: %d\n", fsm->a_bus_drop);

drivers/usb/chipidea/host.c

@@ -59,7 +59,7 @@ static int host_start(struct ci_hdrc *ci)
 	hcd->has_tt = 1;
 
 	hcd->power_budget = ci->platdata->power_budget;
-	hcd->usb_phy = ci->transceiver;
+	hcd->usb_phy = ci->usb_phy;
 	hcd->tpl_support = ci->platdata->tpl_support;
 
 	ehci = hcd_to_ehci(hcd);
@@ -86,10 +86,11 @@ static int host_start(struct ci_hdrc *ci)
 	if (ret) {
 		goto disable_reg;
 	} else {
-		struct usb_otg *otg = ci->transceiver->otg;
+		struct usb_otg *otg = &ci->otg;
 
 		ci->hcd = hcd;
-		if (otg) {
+
+		if (ci_otg_is_fsm_mode(ci)) {
 			otg->host = &hcd->self;
 			hcd->self.otg_port = 1;
 		}

drivers/usb/chipidea/otg_fsm.c

@@ -778,20 +778,10 @@ void ci_hdrc_otg_fsm_start(struct ci_hdrc *ci)
 int ci_hdrc_otg_fsm_init(struct ci_hdrc *ci)
 {
 	int retval = 0;
-	struct usb_otg *otg;
 
-	otg = devm_kzalloc(ci->dev,
-			sizeof(struct usb_otg), GFP_KERNEL);
-	if (!otg) {
-		dev_err(ci->dev,
-		"Failed to allocate usb_otg structure for ci hdrc otg!\n");
-		return -ENOMEM;
-	}
-
-	otg->usb_phy = ci->transceiver;
-	otg->gadget = &ci->gadget;
-	ci->fsm.otg = otg;
-	ci->transceiver->otg = ci->fsm.otg;
+	ci->otg.usb_phy = ci->usb_phy;
+	ci->otg.gadget = &ci->gadget;
+	ci->fsm.otg = &ci->otg;
 	ci->fsm.power_up = 1;
 	ci->fsm.id = hw_read_otgsc(ci, OTGSC_ID) ? 1 : 0;
 	ci->fsm.otg->state = OTG_STATE_UNDEFINED;

drivers/usb/chipidea/udc.c

@@ -1519,8 +1519,8 @@ static int ci_udc_vbus_draw(struct usb_gadget *_gadget, unsigned ma)
 {
 	struct ci_hdrc *ci = container_of(_gadget, struct ci_hdrc, gadget);
 
-	if (ci->transceiver)
-		return usb_phy_set_power(ci->transceiver, ma);
+	if (ci->usb_phy)
+		return usb_phy_set_power(ci->usb_phy, ma);
 	return -ENOTSUPP;
 }
 

drivers/usb/core/hcd.c

@@ -2648,7 +2648,7 @@ int usb_add_hcd(struct usb_hcd *hcd,
 		}
 	}
 
-	if (IS_ENABLED(CONFIG_GENERIC_PHY)) {
+	if (IS_ENABLED(CONFIG_GENERIC_PHY) && !hcd->phy) {
 		struct phy *phy = phy_get(hcd->self.controller, "usb");
 
 		if (IS_ERR(phy)) {
@@ -2668,6 +2668,7 @@ int usb_add_hcd(struct usb_hcd *hcd,
 				goto err_phy;
 			}
 			hcd->phy = phy;
+			hcd->remove_phy = 1;
 		}
 	}
 
@@ -2814,7 +2815,7 @@ err_allocate_root_hub:
 err_register_bus:
 	hcd_buffer_destroy(hcd);
 err_create_buf:
-	if (IS_ENABLED(CONFIG_GENERIC_PHY) && hcd->phy) {
+	if (IS_ENABLED(CONFIG_GENERIC_PHY) && hcd->remove_phy && hcd->phy) {
 		phy_power_off(hcd->phy);
 		phy_exit(hcd->phy);
 		phy_put(hcd->phy);
@@ -2898,7 +2899,7 @@ void usb_remove_hcd(struct usb_hcd *hcd)
 	usb_deregister_bus(&hcd->self);
 	hcd_buffer_destroy(hcd);
 
-	if (IS_ENABLED(CONFIG_GENERIC_PHY) && hcd->phy) {
+	if (IS_ENABLED(CONFIG_GENERIC_PHY) && hcd->remove_phy && hcd->phy) {
 		phy_power_off(hcd->phy);
 		phy_exit(hcd->phy);
 		phy_put(hcd->phy);

include/linux/usb/chipidea.h

@@ -13,7 +13,7 @@ struct ci_hdrc_platform_data {
 	/* offset of the capability registers */
 	uintptr_t	 capoffset;
 	unsigned	 power_budget;
-	struct usb_phy	*phy;
+	struct usb_phy	*usb_phy;
 	enum usb_phy_interface phy_mode;
 	unsigned long	 flags;
 #define CI_HDRC_REGS_SHARED		BIT(0)