Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (88 commits)
  powerpc: Fix lwsync feature fixup vs. modules on 64-bit
  powerpc: Convert pmc_owner_lock to raw_spinlock
  powerpc: Convert die.lock to raw_spinlock
  powerpc: Convert tlbivax_lock to raw_spinlock
  powerpc: Convert mpic locks to raw_spinlock
  powerpc: Convert pmac_pic_lock to raw_spinlock
  powerpc: Convert big_irq_lock to raw_spinlock
  powerpc: Convert feature_lock to raw_spinlock
  powerpc: Convert i8259_lock to raw_spinlock
  powerpc: Convert beat_htab_lock to raw_spinlock
  powerpc: Convert confirm_error_lock to raw_spinlock
  powerpc: Convert ipic_lock to raw_spinlock
  powerpc: Convert native_tlbie_lock to raw_spinlock
  powerpc: Convert beatic_irq_mask_lock to raw_spinlock
  powerpc: Convert nv_lock to raw_spinlock
  powerpc: Convert context_lock to raw_spinlock
  powerpc/85xx: Add NOR, LEDs and PIB support for MPC8568E-MDS boards
  powerpc/86xx: Enable VME driver on the GE SBC610
  powerpc/86xx: Enable VME driver on the GE PPC9A
  powerpc/86xx: Add MSI section to GE PPC9A DTS
  ...

Documentation/powerpc/dts-bindings/fsl/mpc5121-psc.txt

@@ -0,0 +1,70 @@
+MPC5121 PSC Device Tree Bindings
+
+PSC in UART mode
+----------------
+
+For PSC in UART mode the needed PSC serial devices
+are specified by fsl,mpc5121-psc-uart nodes in the
+fsl,mpc5121-immr SoC node. Additionally the PSC FIFO
+Controller node fsl,mpc5121-psc-fifo is requered there:
+
+fsl,mpc5121-psc-uart nodes
+--------------------------
+
+Required properties :
+ - compatible : Should contain "fsl,mpc5121-psc-uart" and "fsl,mpc5121-psc"
+ - cell-index : Index of the PSC in hardware
+ - reg : Offset and length of the register set for the PSC device
+ - interrupts : <a b> where a is the interrupt number of the
+   PSC FIFO Controller and b is a field that represents an
+   encoding of the sense and level information for the interrupt.
+ - interrupt-parent : the phandle for the interrupt controller that
+   services interrupts for this device.
+
+Recommended properties :
+ - fsl,rx-fifo-size : the size of the RX fifo slice (a multiple of 4)
+ - fsl,tx-fifo-size : the size of the TX fifo slice (a multiple of 4)
+
+
+fsl,mpc5121-psc-fifo node
+-------------------------
+
+Required properties :
+ - compatible : Should be "fsl,mpc5121-psc-fifo"
+ - reg : Offset and length of the register set for the PSC
+         FIFO Controller
+ - interrupts : <a b> where a is the interrupt number of the
+   PSC FIFO Controller and b is a field that represents an
+   encoding of the sense and level information for the interrupt.
+ - interrupt-parent : the phandle for the interrupt controller that
+   services interrupts for this device.
+
+
+Example for a board using PSC0 and PSC1 devices in serial mode:
+
+serial@11000 {
+	compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+	cell-index = <0>;
+	reg = <0x11000 0x100>;
+	interrupts = <40 0x8>;
+	interrupt-parent = < &ipic >;
+	fsl,rx-fifo-size = <16>;
+	fsl,tx-fifo-size = <16>;
+};
+
+serial@11100 {
+	compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+	cell-index = <1>;
+	reg = <0x11100 0x100>;
+	interrupts = <40 0x8>;
+	interrupt-parent = < &ipic >;
+	fsl,rx-fifo-size = <16>;
+	fsl,tx-fifo-size = <16>;
+};
+
+pscfifo@11f00 {
+	compatible = "fsl,mpc5121-psc-fifo";
+	reg = <0x11f00 0x100>;
+	interrupts = <40 0x8>;
+	interrupt-parent = < &ipic >;
+};

Documentation/powerpc/dts-bindings/fsl/spi.txt

@@ -13,6 +13,11 @@ Required properties:
 - interrupt-parent : the phandle for the interrupt controller that
   services interrupts for this device.
 
+Optional properties:
+- gpios : specifies the gpio pins to be used for chipselects.
+  The gpios will be referred to as reg = <index> in the SPI child nodes.
+  If unspecified, a single SPI device without a chip select can be used.
+
 Example:
 	spi@4c0 {
 		cell-index = <0>;
@@ -21,4 +26,6 @@ Example:
 		interrupts = <82 0>;
 		interrupt-parent = <700>;
 		mode = "cpu";
+		gpios = <&gpio 18 1	// device reg=<0>
+			 &gpio 19 1>;	// device reg=<1>
 	};

Documentation/powerpc/ptrace.txt

@@ -0,0 +1,134 @@
+GDB intends to support the following hardware debug features of BookE
+processors:
+
+4 hardware breakpoints (IAC)
+2 hardware watchpoints (read, write and read-write) (DAC)
+2 value conditions for the hardware watchpoints (DVC)
+
+For that, we need to extend ptrace so that GDB can query and set these
+resources. Since we're extending, we're trying to create an interface
+that's extendable and that covers both BookE and server processors, so
+that GDB doesn't need to special-case each of them. We added the
+following 3 new ptrace requests.
+
+1. PTRACE_PPC_GETHWDEBUGINFO
+
+Query for GDB to discover the hardware debug features. The main info to
+be returned here is the minimum alignment for the hardware watchpoints.
+BookE processors don't have restrictions here, but server processors have
+an 8-byte alignment restriction for hardware watchpoints. We'd like to avoid
+adding special cases to GDB based on what it sees in AUXV.
+
+Since we're at it, we added other useful info that the kernel can return to
+GDB: this query will return the number of hardware breakpoints, hardware
+watchpoints and whether it supports a range of addresses and a condition.
+The query will fill the following structure provided by the requesting process:
+
+struct ppc_debug_info {
+       unit32_t version;
+       unit32_t num_instruction_bps;
+       unit32_t num_data_bps;
+       unit32_t num_condition_regs;
+       unit32_t data_bp_alignment;
+       unit32_t sizeof_condition; /* size of the DVC register */
+       uint64_t features; /* bitmask of the individual flags */
+};
+
+features will have bits indicating whether there is support for:
+
+#define PPC_DEBUG_FEATURE_INSN_BP_RANGE		0x1
+#define PPC_DEBUG_FEATURE_INSN_BP_MASK		0x2
+#define PPC_DEBUG_FEATURE_DATA_BP_RANGE		0x4
+#define PPC_DEBUG_FEATURE_DATA_BP_MASK		0x8
+
+2. PTRACE_SETHWDEBUG
+
+Sets a hardware breakpoint or watchpoint, according to the provided structure:
+
+struct ppc_hw_breakpoint {
+        uint32_t version;
+#define PPC_BREAKPOINT_TRIGGER_EXECUTE  0x1
+#define PPC_BREAKPOINT_TRIGGER_READ     0x2
+#define PPC_BREAKPOINT_TRIGGER_WRITE    0x4
+        uint32_t trigger_type;       /* only some combinations allowed */
+#define PPC_BREAKPOINT_MODE_EXACT               0x0
+#define PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE     0x1
+#define PPC_BREAKPOINT_MODE_RANGE_EXCLUSIVE     0x2
+#define PPC_BREAKPOINT_MODE_MASK                0x3
+        uint32_t addr_mode;          /* address match mode */
+
+#define PPC_BREAKPOINT_CONDITION_MODE   0x3
+#define PPC_BREAKPOINT_CONDITION_NONE   0x0
+#define PPC_BREAKPOINT_CONDITION_AND    0x1
+#define PPC_BREAKPOINT_CONDITION_EXACT  0x1	/* different name for the same thing as above */
+#define PPC_BREAKPOINT_CONDITION_OR     0x2
+#define PPC_BREAKPOINT_CONDITION_AND_OR 0x3
+#define PPC_BREAKPOINT_CONDITION_BE_ALL 0x00ff0000	/* byte enable bits */
+#define PPC_BREAKPOINT_CONDITION_BE(n)  (1<<((n)+16))
+        uint32_t condition_mode;     /* break/watchpoint condition flags */
+
+        uint64_t addr;
+        uint64_t addr2;
+        uint64_t condition_value;
+};
+
+A request specifies one event, not necessarily just one register to be set.
+For instance, if the request is for a watchpoint with a condition, both the
+DAC and DVC registers will be set in the same request.
+
+With this GDB can ask for all kinds of hardware breakpoints and watchpoints
+that the BookE supports. COMEFROM breakpoints available in server processors
+are not contemplated, but that is out of the scope of this work.
+
+ptrace will return an integer (handle) uniquely identifying the breakpoint or
+watchpoint just created. This integer will be used in the PTRACE_DELHWDEBUG
+request to ask for its removal. Return -ENOSPC if the requested breakpoint
+can't be allocated on the registers.
+
+Some examples of using the structure to:
+
+- set a breakpoint in the first breakpoint register
+
+  p.version         = PPC_DEBUG_CURRENT_VERSION;
+  p.trigger_type    = PPC_BREAKPOINT_TRIGGER_EXECUTE;
+  p.addr_mode       = PPC_BREAKPOINT_MODE_EXACT;
+  p.condition_mode  = PPC_BREAKPOINT_CONDITION_NONE;
+  p.addr            = (uint64_t) address;
+  p.addr2           = 0;
+  p.condition_value = 0;
+
+- set a watchpoint which triggers on reads in the second watchpoint register
+
+  p.version         = PPC_DEBUG_CURRENT_VERSION;
+  p.trigger_type    = PPC_BREAKPOINT_TRIGGER_READ;
+  p.addr_mode       = PPC_BREAKPOINT_MODE_EXACT;
+  p.condition_mode  = PPC_BREAKPOINT_CONDITION_NONE;
+  p.addr            = (uint64_t) address;
+  p.addr2           = 0;
+  p.condition_value = 0;
+
+- set a watchpoint which triggers only with a specific value
+
+  p.version         = PPC_DEBUG_CURRENT_VERSION;
+  p.trigger_type    = PPC_BREAKPOINT_TRIGGER_READ;
+  p.addr_mode       = PPC_BREAKPOINT_MODE_EXACT;
+  p.condition_mode  = PPC_BREAKPOINT_CONDITION_AND | PPC_BREAKPOINT_CONDITION_BE_ALL;
+  p.addr            = (uint64_t) address;
+  p.addr2           = 0;
+  p.condition_value = (uint64_t) condition;
+
+- set a ranged hardware breakpoint
+
+  p.version         = PPC_DEBUG_CURRENT_VERSION;
+  p.trigger_type    = PPC_BREAKPOINT_TRIGGER_EXECUTE;
+  p.addr_mode       = PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE;
+  p.condition_mode  = PPC_BREAKPOINT_CONDITION_NONE;
+  p.addr            = (uint64_t) begin_range;
+  p.addr2           = (uint64_t) end_range;
+  p.condition_value = 0;
+
+3. PTRACE_DELHWDEBUG
+
+Takes an integer which identifies an existing breakpoint or watchpoint
+(i.e., the value returned from PTRACE_SETHWDEBUG), and deletes the
+corresponding breakpoint or watchpoint..

arch/powerpc/Kconfig

@@ -58,7 +58,7 @@ config IRQ_PER_CPU
 
 config NR_IRQS
 	int "Number of virtual interrupt numbers"
-	range 32 512
+	range 32 32768
 	default "512"
 	help
 	  This defines the number of virtual interrupt numbers the kernel
@@ -241,6 +241,33 @@ config PPC_OF_PLATFORM_PCI
 config ARCH_SUPPORTS_DEBUG_PAGEALLOC
 	def_bool y
 
+config PPC_ADV_DEBUG_REGS
+	bool
+	depends on 40x || BOOKE
+	default y
+
+config PPC_ADV_DEBUG_IACS
+	int
+	depends on PPC_ADV_DEBUG_REGS
+	default 4 if 44x
+	default 2
+
+config PPC_ADV_DEBUG_DACS
+	int
+	depends on PPC_ADV_DEBUG_REGS
+	default 2
+
+config PPC_ADV_DEBUG_DVCS
+	int
+	depends on PPC_ADV_DEBUG_REGS
+	default 2 if 44x
+	default 0
+
+config PPC_ADV_DEBUG_DAC_RANGE
+	bool
+	depends on PPC_ADV_DEBUG_REGS && 44x
+	default y
+
 source "init/Kconfig"
 
 source "kernel/Kconfig.freezer"

arch/powerpc/boot/dts/arches.dts

@@ -60,6 +60,7 @@
 			d-cache-size = <32768>;
 			dcr-controller;
 			dcr-access-method = "native";
+			next-level-cache = <&L2C0>;
 		};
 	};
 
@@ -146,6 +147,13 @@
 			dcr-reg = <0x010 0x002>;
 		};
 
+		CRYPTO: crypto@180000 {
+			compatible = "amcc,ppc460gt-crypto", "amcc,ppc4xx-crypto";
+			reg = <4 0x00180000 0x80400>;
+			interrupt-parent = <&UIC0>;
+			interrupts = <0x1d 0x4>;
+		};
+
 		MAL0: mcmal {
 			compatible = "ibm,mcmal-460gt", "ibm,mcmal2";
 			dcr-reg = <0x180 0x062>;
@@ -274,6 +282,7 @@
 				max-frame-size = <9000>;
 				rx-fifo-size = <4096>;
 				tx-fifo-size = <2048>;
+				rx-fifo-size-gige = <16384>;
 				phy-mode = "sgmii";
 				phy-map = <0xffffffff>;
 				gpcs-address = <0x0000000a>;
@@ -302,6 +311,7 @@
 				max-frame-size = <9000>;
 				rx-fifo-size = <4096>;
 				tx-fifo-size = <2048>;
+				rx-fifo-size-gige = <16384>;
 				phy-mode = "sgmii";
 				phy-map = <0x00000000>;
 				gpcs-address = <0x0000000b>;
@@ -331,6 +341,8 @@
 				max-frame-size = <9000>;
 				rx-fifo-size = <4096>;
 				tx-fifo-size = <2048>;
+				rx-fifo-size-gige = <16384>;
+				tx-fifo-size-gige = <16384>; /* emac2&3 only */
 				phy-mode = "sgmii";
 				phy-map = <0x00000001>;
 				gpcs-address = <0x0000000C>;

arch/powerpc/boot/dts/gef_ppc9a.dts

@@ -341,6 +341,22 @@
 			device_type = "open-pic";
 		};
 
+		msi@41600 {
+			compatible = "fsl,mpc8641-msi", "fsl,mpic-msi";
+			reg = <0x41600 0x80>;
+			msi-available-ranges = <0 0x100>;
+			interrupts = <
+				0xe0 0
+				0xe1 0
+				0xe2 0
+				0xe3 0
+				0xe4 0
+				0xe5 0
+				0xe6 0
+				0xe7 0>;
+			interrupt-parent = <&mpic>;
+		};
+
 		global-utilities@e0000 {
 			compatible = "fsl,mpc8641-guts";
 			reg = <0xe0000 0x1000>;

arch/powerpc/boot/dts/gef_sbc310.dts

@@ -32,6 +32,7 @@
 		serial0 = &serial0;
 		serial1 = &serial1;
 		pci0 = &pci0;
+		pci1 = &pci1;
 	};
 
 	cpus {
@@ -338,6 +339,22 @@
 			device_type = "open-pic";
 		};
 
+		msi@41600 {
+			compatible = "fsl,mpc8641-msi", "fsl,mpic-msi";
+			reg = <0x41600 0x80>;
+			msi-available-ranges = <0 0x100>;
+			interrupts = <
+				0xe0 0
+				0xe1 0
+				0xe2 0
+				0xe3 0
+				0xe4 0
+				0xe5 0
+				0xe6 0
+				0xe7 0>;
+			interrupt-parent = <&mpic>;
+		};
+
 		global-utilities@e0000 {
 			compatible = "fsl,mpc8641-guts";
 			reg = <0xe0000 0x1000>;
@@ -358,7 +375,7 @@
 		clock-frequency = <33333333>;
 		interrupt-parent = <&mpic>;
 		interrupts = <0x18 0x2>;
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
 		interrupt-map = <
 			0x0000 0x0 0x0 0x1 &mpic 0x0 0x2
 			0x0000 0x0 0x0 0x2 &mpic 0x1 0x2

arch/powerpc/boot/dts/gef_sbc610.dts

@@ -75,14 +75,48 @@
 		interrupts = <19 2>;
 		interrupt-parent = <&mpic>;
 
-		ranges = <0 0 0xff000000 0x01000000     // 16MB Boot flash
-			  1 0 0xe8000000 0x08000000     // Paged Flash 0
-			  2 0 0xe0000000 0x08000000     // Paged Flash 1
-			  3 0 0xfc100000 0x00020000     // NVRAM
-			  4 0 0xfc000000 0x00008000     // FPGA
-			  5 0 0xfc008000 0x00008000     // AFIX FPGA
-			  6 0 0xfd000000 0x00800000     // IO FPGA (8-bit)
-			  7 0 0xfd800000 0x00800000>;   // IO FPGA (32-bit)
+		ranges = <0 0 0xff000000 0x01000000	// 16MB Boot flash
+			  1 0 0xe8000000 0x08000000	// Paged Flash 0
+			  2 0 0xe0000000 0x08000000	// Paged Flash 1
+			  3 0 0xfc100000 0x00020000	// NVRAM
+			  4 0 0xfc000000 0x00008000	// FPGA
+			  5 0 0xfc008000 0x00008000	// AFIX FPGA
+			  6 0 0xfd000000 0x00800000	// IO FPGA (8-bit)
+			  7 0 0xfd800000 0x00800000>;	// IO FPGA (32-bit)
+
+		/* flash@0,0 is a mirror of part of the memory in flash@1,0
+		flash@0,0 {
+			compatible = "gef,sbc610-firmware-mirror", "cfi-flash";
+			reg = <0x0 0x0 0x1000000>;
+			bank-width = <4>;
+			device-width = <2>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "firmware";
+				reg = <0x0 0x1000000>;
+				read-only;
+			};
+		};
+		*/
+
+		flash@1,0 {
+			compatible = "gef,sbc610-paged-flash", "cfi-flash";
+			reg = <0x1 0x0 0x8000000>;
+			bank-width = <4>;
+			device-width = <2>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "user";
+				reg = <0x0 0x7800000>;
+			};
+			partition@7800000 {
+				label = "firmware";
+				reg = <0x7800000 0x800000>;
+				read-only;
+			};
+		};
 
 		nvram@3,0 {
 			device_type = "nvram";
@@ -305,6 +339,22 @@
 			device_type = "open-pic";
 		};
 
+		msi@41600 {
+			compatible = "fsl,mpc8641-msi", "fsl,mpic-msi";
+			reg = <0x41600 0x80>;
+			msi-available-ranges = <0 0x100>;
+			interrupts = <
+				0xe0 0
+				0xe1 0
+				0xe2 0
+				0xe3 0
+				0xe4 0
+				0xe5 0
+				0xe6 0
+				0xe7 0>;
+			interrupt-parent = <&mpic>;
+		};
+
 		global-utilities@e0000 {
 			compatible = "fsl,mpc8641-guts";
 			reg = <0xe0000 0x1000>;

arch/powerpc/boot/dts/glacier.dts

@@ -1,7 +1,7 @@
 /*
  * Device Tree Source for AMCC Glacier (460GT)
  *
- * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ * Copyright 2008-2010 DENX Software Engineering, Stefan Roese <sr@denx.de>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2.  This program is licensed "as is" without
@@ -42,6 +42,7 @@
 			d-cache-size = <32768>;
 			dcr-controller;
 			dcr-access-method = "native";
+			next-level-cache = <&L2C0>;
 		};
 	};
 
@@ -106,6 +107,16 @@
 		dcr-reg = <0x00c 0x002>;
 	};
 
+	L2C0: l2c {
+		compatible = "ibm,l2-cache-460gt", "ibm,l2-cache";
+		dcr-reg = <0x020 0x008		/* Internal SRAM DCR's */
+			   0x030 0x008>;	/* L2 cache DCR's */
+		cache-line-size = <32>;		/* 32 bytes */
+		cache-size = <262144>;		/* L2, 256K */
+		interrupt-parent = <&UIC1>;
+		interrupts = <11 1>;
+	};
+
 	plb {
 		compatible = "ibm,plb-460gt", "ibm,plb4";
 		#address-cells = <2>;
@@ -118,6 +129,13 @@
 			dcr-reg = <0x010 0x002>;
 		};
 
+		CRYPTO: crypto@180000 {
+			compatible = "amcc,ppc460gt-crypto", "amcc,ppc4xx-crypto";
+			reg = <4 0x00180000 0x80400>;
+			interrupt-parent = <&UIC0>;
+			interrupts = <0x1d 0x4>;
+		};
+
 		MAL0: mcmal {
 			compatible = "ibm,mcmal-460gt", "ibm,mcmal2";
 			dcr-reg = <0x180 0x062>;
@@ -186,6 +204,29 @@
 						reg = <0x03fa0000 0x00060000>;
 					};
 				};
+
+				ndfc@3,0 {
+					compatible = "ibm,ndfc";
+					reg = <0x00000003 0x00000000 0x00002000>;
+					ccr = <0x00001000>;
+					bank-settings = <0x80002222>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					nand {
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						partition@0 {
+							label = "u-boot";
+							reg = <0x00000000 0x00100000>;
+						};
+						partition@100000 {
+							label = "user";
+							reg = <0x00000000 0x03f00000>;
+						};
+					};
+				};
 			};
 
 			UART0: serial@ef600300 {
@@ -237,6 +278,20 @@
 				reg = <0xef600700 0x00000014>;
 				interrupt-parent = <&UIC0>;
 				interrupts = <0x2 0x4>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				rtc@68 {
+					compatible = "stm,m41t80";
+					reg = <0x68>;
+					interrupt-parent = <&UIC2>;
+					interrupts = <0x19 0x8>;
+				};
+				sttm@48 {
+					compatible = "ad,ad7414";
+					reg = <0x48>;
+					interrupt-parent = <&UIC1>;
+					interrupts = <0x14 0x8>;
+				};
 			};
 
 			IIC1: i2c@ef600800 {
@@ -275,7 +330,7 @@
 
 			EMAC0: ethernet@ef600e00 {
 				device_type = "network";
-				compatible = "ibm,emac-460gt", "ibm,emac4";
+				compatible = "ibm,emac-460gt", "ibm,emac4sync";
 				interrupt-parent = <&EMAC0>;
 				interrupts = <0x0 0x1>;
 				#interrupt-cells = <1>;
@@ -283,7 +338,7 @@
 				#size-cells = <0>;
 				interrupt-map = </*Status*/ 0x0 &UIC2 0x10 0x4
 						 /*Wake*/   0x1 &UIC2 0x14 0x4>;
-				reg = <0xef600e00 0x00000074>;
+				reg = <0xef600e00 0x000000c4>;
 				local-mac-address = [000000000000]; /* Filled in by U-Boot */
 				mal-device = <&MAL0>;
 				mal-tx-channel = <0>;
@@ -305,7 +360,7 @@
 
 			EMAC1: ethernet@ef600f00 {
 				device_type = "network";
-				compatible = "ibm,emac-460gt", "ibm,emac4";
+				compatible = "ibm,emac-460gt", "ibm,emac4sync";
 				interrupt-parent = <&EMAC1>;
 				interrupts = <0x0 0x1>;
 				#interrupt-cells = <1>;
@@ -313,7 +368,7 @@
 				#size-cells = <0>;
 				interrupt-map = </*Status*/ 0x0 &UIC2 0x11 0x4
 						 /*Wake*/   0x1 &UIC2 0x15 0x4>;
-				reg = <0xef600f00 0x00000074>;
+				reg = <0xef600f00 0x000000c4>;
 				local-mac-address = [000000000000]; /* Filled in by U-Boot */
 				mal-device = <&MAL0>;
 				mal-tx-channel = <1>;
@@ -336,7 +391,7 @@
 
 			EMAC2: ethernet@ef601100 {
 				device_type = "network";
-				compatible = "ibm,emac-460gt", "ibm,emac4";
+				compatible = "ibm,emac-460gt", "ibm,emac4sync";
 				interrupt-parent = <&EMAC2>;
 				interrupts = <0x0 0x1>;
 				#interrupt-cells = <1>;
@@ -344,7 +399,7 @@
 				#size-cells = <0>;
 				interrupt-map = </*Status*/ 0x0 &UIC2 0x12 0x4
 						 /*Wake*/   0x1 &UIC2 0x16 0x4>;
-				reg = <0xef601100 0x00000074>;
+				reg = <0xef601100 0x000000c4>;
 				local-mac-address = [000000000000]; /* Filled in by U-Boot */
 				mal-device = <&MAL0>;
 				mal-tx-channel = <2>;
@@ -366,7 +421,7 @@
 
 			EMAC3: ethernet@ef601200 {
 				device_type = "network";
-				compatible = "ibm,emac-460gt", "ibm,emac4";
+				compatible = "ibm,emac-460gt", "ibm,emac4sync";
 				interrupt-parent = <&EMAC3>;
 				interrupts = <0x0 0x1>;
 				#interrupt-cells = <1>;
@@ -374,7 +429,7 @@
 				#size-cells = <0>;
 				interrupt-map = </*Status*/ 0x0 &UIC2 0x13 0x4
 						 /*Wake*/   0x1 &UIC2 0x17 0x4>;
-				reg = <0xef601200 0x00000074>;
+				reg = <0xef601200 0x000000c4>;
 				local-mac-address = [000000000000]; /* Filled in by U-Boot */
 				mal-device = <&MAL0>;
 				mal-tx-channel = <3>;
@@ -414,6 +469,7 @@
 			 * later cannot be changed
 			 */
 			ranges = <0x02000000 0x00000000 0x80000000 0x0000000d 0x80000000 0x00000000 0x80000000
+				  0x02000000 0x00000000 0x00000000 0x0000000c 0x0ee00000 0x00000000 0x00100000
 				  0x01000000 0x00000000 0x00000000 0x0000000c 0x08000000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
@@ -444,6 +500,7 @@
 			 * later cannot be changed
 			 */
 			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
+				  0x02000000 0x00000000 0x00000000 0x0000000f 0x00000000 0x00000000 0x00100000
 				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
@@ -485,6 +542,7 @@
 			 * later cannot be changed
 			 */
 			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000
+				  0x02000000 0x00000000 0x00000000 0x0000000f 0x00100000 0x00000000 0x00100000
 				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */

arch/powerpc/boot/dts/katmai.dts

@@ -156,7 +156,7 @@
 			compatible = "ibm,opb-440spe", "ibm,opb-440gp", "ibm,opb";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges = <0x00000000 0x00000004 0xe0000000 0x20000000>;
+			ranges = <0xe0000000 0x00000004 0xe0000000 0x20000000>;
 			clock-frequency = <0>; /* Filled in by zImage */
 
 			EBC0: ebc {
@@ -165,14 +165,47 @@
 				#address-cells = <2>;
 				#size-cells = <1>;
 				clock-frequency = <0>; /* Filled in by zImage */
+				/* ranges property is supplied by U-Boot */
 				interrupts = <0x5 0x1>;
 				interrupt-parent = <&UIC1>;
+
+				nor_flash@0,0 {
+					compatible = "cfi-flash";
+					bank-width = <2>;
+					reg = <0x00000000 0x00000000 0x01000000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					partition@0 {
+						label = "kernel";
+						reg = <0x00000000 0x001e0000>;
+					};
+					partition@1e0000 {
+						label = "dtb";
+						reg = <0x001e0000 0x00020000>;
+					};
+					partition@200000 {
+						label = "root";
+						reg = <0x00200000 0x00200000>;
+					};
+					partition@400000 {
+						label = "user";
+						reg = <0x00400000 0x00b60000>;
+					};
+					partition@f60000 {
+						label = "env";
+						reg = <0x00f60000 0x00040000>;
+					};
+					partition@fa0000 {
+						label = "u-boot";
+						reg = <0x00fa0000 0x00060000>;
+					};
+				};
 			};
 
-			UART0: serial@10000200 {
+			UART0: serial@f0000200 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <0x10000200 0x00000008>;
+				reg = <0xf0000200 0x00000008>;
 				virtual-reg = <0xa0000200>;
 				clock-frequency = <0>; /* Filled in by zImage */
 				current-speed = <115200>;
@@ -180,10 +213,10 @@
 				interrupts = <0x0 0x4>;
 			};
 
-			UART1: serial@10000300 {
+			UART1: serial@f0000300 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <0x10000300 0x00000008>;
+				reg = <0xf0000300 0x00000008>;
 				virtual-reg = <0xa0000300>;
 				clock-frequency = <0>;
 				current-speed = <0>;
@@ -192,10 +225,10 @@
 			};
 
 
-			UART2: serial@10000600 {
+			UART2: serial@f0000600 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <0x10000600 0x00000008>;
+				reg = <0xf0000600 0x00000008>;
 				virtual-reg = <0xa0000600>;
 				clock-frequency = <0>;
 				current-speed = <0>;
@@ -203,27 +236,27 @@
 				interrupts = <0x5 0x4>;
 			};
 
-			IIC0: i2c@10000400 {
+			IIC0: i2c@f0000400 {
 				compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic";
-				reg = <0x10000400 0x00000014>;
+				reg = <0xf0000400 0x00000014>;
 				interrupt-parent = <&UIC0>;
 				interrupts = <0x2 0x4>;
 			};
 
-			IIC1: i2c@10000500 {
+			IIC1: i2c@f0000500 {
 				compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic";
-				reg = <0x10000500 0x00000014>;
+				reg = <0xf0000500 0x00000014>;
 				interrupt-parent = <&UIC0>;
 				interrupts = <0x3 0x4>;
 			};
 
-			EMAC0: ethernet@10000800 {
+			EMAC0: ethernet@f0000800 {
 				linux,network-index = <0x0>;
 				device_type = "network";
 				compatible = "ibm,emac-440spe", "ibm,emac4";
 				interrupt-parent = <&UIC1>;
 				interrupts = <0x1c 0x4 0x1d 0x4>;
-				reg = <0x10000800 0x00000074>;
+				reg = <0xf0000800 0x00000074>;
 				local-mac-address = [000000000000];
 				mal-device = <&MAL0>;
 				mal-tx-channel = <0>;
@@ -248,11 +281,11 @@
 			primary;
 			large-inbound-windows;
 			enable-msi-hole;
-			reg = <0x0000000c 0x0ec00000   0x00000008	/* Config space access */
-			       0x00000000 0x00000000 0x00000000		/* no IACK cycles */
-			       0x0000000c 0x0ed00000   0x00000004   /* Special cycles */
-			       0x0000000c 0x0ec80000 0x00000100	/* Internal registers */
-			       0x0000000c 0x0ec80100  0x000000fc>;	/* Internal messaging registers */
+			reg = <0x0000000c 0x0ec00000 0x00000008   /* Config space access */
+			       0x00000000 0x00000000 0x00000000   /* no IACK cycles */
+			       0x0000000c 0x0ed00000 0x00000004   /* Special cycles */
+			       0x0000000c 0x0ec80000 0x00000100   /* Internal registers */
+			       0x0000000c 0x0ec80100 0x000000fc>; /* Internal messaging registers */
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed
@@ -453,6 +486,6 @@
 	};
 
 	chosen {
-		linux,stdout-path = "/plb/opb/serial@10000200";
+		linux,stdout-path = "/plb/opb/serial@f0000200";
 	};
 };

arch/powerpc/boot/dts/mpc5121ads.dts

@@ -62,17 +62,12 @@
 		interrupt-parent = < &ipic >;
 		#address-cells = <1>;
 		#size-cells = <1>;
-		bank-width = <1>;
 		// ADS has two Hynix 512MB Nand flash chips in a single
-		// stacked package .
+		// stacked package.
 		chips = <2>;
-		nand0@0 {
-			label = "nand0";
-			reg = <0x00000000 0x02000000>; 	// first 32 MB of chip 0
-		};
-		nand1@20000000 {
-			label = "nand1";
-			reg = <0x20000000 0x02000000>; 	// first 32 MB of chip 1
+		nand@0 {
+			label = "nand";
+			reg = <0x00000000 0x40000000>;	// 512MB + 512MB
 		};
 	};
 
@@ -166,6 +161,11 @@
 			interrupt-parent = < &ipic >;
 		};
 
+		reset@e00 {	// Reset module
+			compatible = "fsl,mpc5121-reset";
+			reg = <0xe00 0x100>;
+		};
+
 		clock@f00 {	// Clock control
 			compatible = "fsl,mpc5121-clock";
 			reg = <0xf00 0x100>;
@@ -185,17 +185,15 @@
 			interrupt-parent = < &ipic >;
 		};
 
-		mscan@1300 {
+		can@1300 {
 			compatible = "fsl,mpc5121-mscan";
-			cell-index = <0>;
 			interrupts = <12 0x8>;
 			interrupt-parent = < &ipic >;
 			reg = <0x1300 0x80>;
 		};
 
-		mscan@1380 {
+		can@1380 {
 			compatible = "fsl,mpc5121-mscan";
-			cell-index = <1>;
 			interrupts = <13 0x8>;
 			interrupt-parent = < &ipic >;
 			reg = <0x1380 0x80>;
@@ -205,17 +203,31 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
-			cell-index = <0>;
 			reg = <0x1700 0x20>;
 			interrupts = <9 0x8>;
 			interrupt-parent = < &ipic >;
+			fsl,preserve-clocking;
+
+			hwmon@4a {
+				compatible = "adi,ad7414";
+				reg = <0x4a>;
+			};
+
+			eeprom@50 {
+				compatible = "at,24c32";
+				reg = <0x50>;
+			};
+
+			rtc@68 {
+				compatible = "stm,m41t62";
+				reg = <0x68>;
+			};
 		};
 
 		i2c@1720 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
-			cell-index = <1>;
 			reg = <0x1720 0x20>;
 			interrupts = <10 0x8>;
 			interrupt-parent = < &ipic >;
@@ -225,7 +237,6 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
-			cell-index = <2>;
 			reg = <0x1740 0x20>;
 			interrupts = <11 0x8>;
 			interrupt-parent = < &ipic >;
@@ -244,7 +255,7 @@
 		};
 
 		display@2100 {
-			compatible = "fsl,mpc5121-diu", "fsl-diu";
+			compatible = "fsl,mpc5121-diu";
 			reg = <0x2100 0x100>;
 			interrupts = <64 0x8>;
 			interrupt-parent = < &ipic >;
@@ -277,7 +288,7 @@
 
 		// USB1 using external ULPI PHY
 		//usb@3000 {
-		//	compatible = "fsl,mpc5121-usb2-dr", "fsl-usb2-dr";
+		//	compatible = "fsl,mpc5121-usb2-dr";
 		//	reg = <0x3000 0x1000>;
 		//	#address-cells = <1>;
 		//	#size-cells = <0>;
@@ -285,12 +296,11 @@
 		//	interrupts = <43 0x8>;
 		//	dr_mode = "otg";
 		//	phy_type = "ulpi";
-		//	port1;
 		//};
 
 		// USB0 using internal UTMI PHY
 		usb@4000 {
-			compatible = "fsl,mpc5121-usb2-dr", "fsl-usb2-dr";
+			compatible = "fsl,mpc5121-usb2-dr";
 			reg = <0x4000 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -298,7 +308,8 @@
 			interrupts = <44 0x8>;
 			dr_mode = "otg";
 			phy_type = "utmi_wide";
-			port0;
+			fsl,invert-drvvbus;
+			fsl,invert-pwr-fault;
 		};
 
 		// IO control
@@ -365,7 +376,7 @@
 		};
 
 		dma@14000 {
-			compatible = "fsl,mpc5121-dma2";
+			compatible = "fsl,mpc5121-dma";
 			reg = <0x14000 0x1800>;
 			interrupts = <65 0x8>;
 			interrupt-parent = < &ipic >;

arch/powerpc/boot/dts/mpc8568mds.dts

@@ -54,9 +54,52 @@
 		reg = <0x0 0x10000000>;
 	};
 
-	bcsr@f8000000 {
-		compatible = "fsl,mpc8568mds-bcsr";
-		reg = <0xf8000000 0x8000>;
+	localbus@e0005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8568-localbus", "fsl,pq3-localbus",
+			     "simple-bus";
+		reg = <0xe0005000 0x1000>;
+
+		ranges = <0x0 0x0 0xfe000000 0x02000000
+			  0x1 0x0 0xf8000000 0x00008000
+			  0x2 0x0 0xf0000000 0x04000000
+			  0x4 0x0 0xf8008000 0x00008000
+			  0x5 0x0 0xf8010000 0x00008000>;
+
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x02000000>;
+			bank-width = <2>;
+			device-width = <2>;
+		};
+
+		bcsr@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8568mds-bcsr";
+			reg = <1 0 0x8000>;
+			ranges = <0 1 0 0x8000>;
+
+			bcsr5: gpio-controller@11 {
+				#gpio-cells = <2>;
+				compatible = "fsl,mpc8568mds-bcsr-gpio";
+				reg = <0x5 0x1>;
+				gpio-controller;
+			};
+		};
+
+		pib@4,0 {
+			compatible = "fsl,mpc8568mds-pib";
+			reg = <4 0 0x8000>;
+		};
+
+		pib@5,0 {
+			compatible = "fsl,mpc8568mds-pib";
+			reg = <5 0 0x8000>;
+		};
 	};
 
 	soc8568@e0000000 {
@@ -610,4 +653,20 @@
 		sleep = <&pmc 0x00080000   /* controller */
 			 &pmc 0x00040000>; /* message unit */
 	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		green {
+			gpios = <&bcsr5 1 0>;
+		};
+
+		amber {
+			gpios = <&bcsr5 2 0>;
+		};
+
+		red {
+			gpios = <&bcsr5 3 0>;
+		};
+	};
 };

arch/powerpc/configs/44x/katmai_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc1
-# Mon Jan  4 14:55:34 2010
+# Linux kernel version: 2.6.33-rc5
+# Tue Jan 26 14:40:58 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -106,6 +106,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -442,7 +443,90 @@ CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=y
 CONFIG_PROC_EVENTS=y
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
@@ -500,7 +584,7 @@ CONFIG_HAVE_IDE=y
 #
 
 #
-# See the help texts for more information.
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -763,7 +847,6 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_EXT4_FS is not set
-CONFIG_EXT4_USE_FOR_EXT23=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
@@ -820,6 +903,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set

arch/powerpc/configs/86xx/gef_ppc9a_defconfig

@@ -1557,7 +1557,52 @@ CONFIG_RTC_DRV_RX8581=y
 #
 # TI VLYNQ
 #
-# CONFIG_STAGING is not set
+CONFIG_STAGING=y
+# CONFIG_STAGING_EXCLUDE_BUILD is not set
+# CONFIG_ET131X is not set
+# CONFIG_ME4000 is not set
+# CONFIG_MEILHAUS is not set
+# CONFIG_USB_IP_COMMON is not set
+# CONFIG_ECHO is not set
+# CONFIG_COMEDI is not set
+# CONFIG_ASUS_OLED is not set
+# CONFIG_ALTERA_PCIE_CHDMA is not set
+# CONFIG_INPUT_MIMIO is not set
+# CONFIG_TRANZPORT is not set
+
+#
+# Android
+#
+# CONFIG_ANDROID is not set
+# CONFIG_DST is not set
+# CONFIG_POHMELFS is not set
+# CONFIG_B3DFG is not set
+# CONFIG_IDE_PHISON is not set
+# CONFIG_PLAN9AUTH is not set
+# CONFIG_HECI is not set
+# CONFIG_USB_CPC is not set
+
+#
+# Qualcomm MSM Camera And Video
+#
+
+#
+# Camera Sensor Selection
+#
+# CONFIG_HYPERV_STORAGE is not set
+# CONFIG_HYPERV_BLOCK is not set
+# CONFIG_HYPERV_NET is not set
+CONFIG_VME_BUS=y
+
+#
+# VME Bridge Drivers
+#
+CONFIG_VME_TSI148=y
+
+#
+# VME Device Drivers
+#
+# CONFIG_VME_USER is not set
 
 #
 # File systems

arch/powerpc/configs/86xx/gef_sbc610_defconfig

@@ -265,7 +265,7 @@ CONFIG_MMIO_NVRAM=y
 #
 # Kernel options
 #
-# CONFIG_HIGHMEM is not set
+CONFIG_HIGHMEM=y
 CONFIG_TICK_ONESHOT=y
 # CONFIG_NO_HZ is not set
 CONFIG_HIGH_RES_TIMERS=y
@@ -651,7 +651,7 @@ CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_OF_PARTS is not set
+CONFIG_MTD_OF_PARTS=y
 # CONFIG_MTD_AR7_PARTS is not set
 
 #
@@ -671,13 +671,9 @@ CONFIG_MTD_BLOCK=y
 # RAM/ROM/Flash chip drivers
 #
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_JEDECPROBE=y
 CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-# CONFIG_MTD_CFI_NOSWAP is not set
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_LE_BYTE_SWAP=y
-# CONFIG_MTD_CFI_GEOMETRY is not set
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
 CONFIG_MTD_MAP_BANK_WIDTH_1=y
 CONFIG_MTD_MAP_BANK_WIDTH_2=y
 CONFIG_MTD_MAP_BANK_WIDTH_4=y
@@ -688,7 +684,6 @@ CONFIG_MTD_CFI_I1=y
 CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_CFI_I4 is not set
 # CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
 # CONFIG_MTD_CFI_STAA is not set
@@ -1652,7 +1647,44 @@ CONFIG_RTC_DRV_RX8581=y
 #
 # TI VLYNQ
 #
-# CONFIG_STAGING is not set
+CONFIG_STAGING=y
+# CONFIG_STAGING_EXCLUDE_BUILD is not set
+# CONFIG_ET131X is not set
+# CONFIG_ME4000 is not set
+# CONFIG_MEILHAUS is not set
+# CONFIG_USB_IP_COMMON is not set
+# CONFIG_ECHO is not set
+# CONFIG_COMEDI is not set
+# CONFIG_ASUS_OLED is not set
+# CONFIG_ALTERA_PCIE_CHDMA is not set
+# CONFIG_INPUT_MIMIO is not set
+# CONFIG_TRANZPORT is not set
+
+#
+# Android
+#
+# CONFIG_ANDROID is not set
+# CONFIG_DST is not set
+# CONFIG_POHMELFS is not set
+# CONFIG_B3DFG is not set
+# CONFIG_IDE_PHISON is not set
+# CONFIG_PLAN9AUTH is not set
+# CONFIG_HECI is not set
+# CONFIG_VT6655 is not set
+# CONFIG_USB_CPC is not set
+# CONFIG_RDC_17F3101X is not set
+CONFIG_VME_BUS=y
+
+#
+# VME Bridge Drivers
+#
+# CONFIG_VME_CA91CX42 is not set
+CONFIG_VME_TSI148=y
+
+#
+# VME Device Drivers
+#
+# CONFIG_VME_USER is not set
 
 #
 # File systems
@@ -1729,7 +1761,17 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1874,6 +1916,7 @@ CONFIG_DEBUG_PREEMPT=y
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_HIGHMEM is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set

arch/powerpc/configs/mpc512x_defconfig

@@ -0,0 +1,1694 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.33-rc6
+# Fri Feb  5 11:48:29 2010
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+CONFIG_PPC_BOOK3S_32=y
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
+CONFIG_PPC_FPU=y
+# CONFIG_ALTIVEC is not set
+CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_STD_MMU_32=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
+# CONFIG_SMP is not set
+CONFIG_NOT_COHERENT_CACHE=y
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+# CONFIG_PPC_UDBG_16550 is not set
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
+CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_LZO=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+# CONFIG_FREEZER is not set
+
+#
+# Platform support
+#
+# CONFIG_PPC_CHRP is not set
+CONFIG_PPC_MPC512x=y
+CONFIG_PPC_MPC5121=y
+CONFIG_MPC5121_ADS=y
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+# CONFIG_PPC_PMAC is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
+# CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
+# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
+CONFIG_IPIC=y
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_TAU is not set
+# CONFIG_QUICC_ENGINE is not set
+# CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+CONFIG_HZ_1000=y
+CONFIG_HZ=1000
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_MIGRATION is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
+# CONFIG_PM is not set
+# CONFIG_SECCOMP is not set
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_FSL_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
+# CONFIG_PCI is not set
+# CONFIG_PCI_DOMAINS is not set
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HAS_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_CONSISTENT_SIZE=0x00200000
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+CONFIG_CAN=y
+CONFIG_CAN_RAW=y
+CONFIG_CAN_BCM=y
+
+#
+# CAN Device Drivers
+#
+CONFIG_CAN_VCAN=y
+CONFIG_CAN_DEV=y
+# CONFIG_CAN_CALC_BITTIMING is not set
+CONFIG_CAN_MSCAN=y
+# CONFIG_CAN_SJA1000 is not set
+
+#
+# CAN USB interfaces
+#
+# CONFIG_CAN_EMS_USB is not set
+CONFIG_CAN_DEBUG_DEVICES=y
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+CONFIG_MTD_ROM=y
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_NAND_FSL_ELBC is not set
+CONFIG_MTD_NAND_MPC5121_NFC=y
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
+CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=1
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_XIP=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=y
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+CONFIG_DAVICOM_PHY=y
+CONFIG_QSEMI_PHY=y
+CONFIG_LXT_PHY=y
+CONFIG_CICADA_PHY=y
+CONFIG_VITESSE_PHY=y
+CONFIG_SMSC_PHY=y
+CONFIG_BROADCOM_PHY=y
+CONFIG_ICPLUS_PHY=y
+CONFIG_REALTEK_PHY=y
+CONFIG_NATIONAL_PHY=y
+CONFIG_STE10XP=y
+CONFIG_LSI_ET1011C_PHY=y
+CONFIG_FIXED_PHY=y
+CONFIG_MDIO_BITBANG=y
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_XILINX_EMACLITE is not set
+CONFIG_FS_ENET=y
+CONFIG_FS_ENET_MPC5121_FEC=y
+CONFIG_FS_ENET_HAS_FEC=y
+CONFIG_FS_ENET_MDIO_FEC=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_SENTELIC is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_MPC52xx=y
+CONFIG_SERIAL_MPC52xx_CONSOLE=y
+CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_REGULATOR is not set
+CONFIG_MEDIA_SUPPORT=y
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L2_COMMON=y
+# CONFIG_VIDEO_ALLOW_V4L1 is not set
+CONFIG_VIDEO_V4L1_COMPAT=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=y
+
+#
+# Multimedia drivers
+#
+CONFIG_IR_CORE=y
+CONFIG_VIDEO_IR=y
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=y
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=y
+CONFIG_MEDIA_TUNER_TDA8290=y
+CONFIG_MEDIA_TUNER_TDA9887=y
+CONFIG_MEDIA_TUNER_TEA5761=y
+CONFIG_MEDIA_TUNER_TEA5767=y
+CONFIG_MEDIA_TUNER_MT20XX=y
+CONFIG_MEDIA_TUNER_XC2028=y
+CONFIG_MEDIA_TUNER_XC5000=y
+CONFIG_MEDIA_TUNER_MC44S803=y
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+CONFIG_VIDEO_ADV_DEBUG=y
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+CONFIG_VIDEO_IR_I2C=y
+
+#
+# Encoders/decoders and other helper chips
+#
+
+#
+# Audio decoders
+#
+# CONFIG_VIDEO_TVAUDIO is not set
+# CONFIG_VIDEO_TDA7432 is not set
+# CONFIG_VIDEO_TDA9840 is not set
+# CONFIG_VIDEO_TDA9875 is not set
+# CONFIG_VIDEO_TEA6415C is not set
+# CONFIG_VIDEO_TEA6420 is not set
+# CONFIG_VIDEO_MSP3400 is not set
+# CONFIG_VIDEO_CS5345 is not set
+# CONFIG_VIDEO_CS53L32A is not set
+# CONFIG_VIDEO_M52790 is not set
+# CONFIG_VIDEO_TLV320AIC23B is not set
+# CONFIG_VIDEO_WM8775 is not set
+# CONFIG_VIDEO_WM8739 is not set
+# CONFIG_VIDEO_VP27SMPX is not set
+
+#
+# RDS decoders
+#
+# CONFIG_VIDEO_SAA6588 is not set
+
+#
+# Video decoders
+#
+# CONFIG_VIDEO_ADV7180 is not set
+# CONFIG_VIDEO_BT819 is not set
+# CONFIG_VIDEO_BT856 is not set
+# CONFIG_VIDEO_BT866 is not set
+# CONFIG_VIDEO_KS0127 is not set
+# CONFIG_VIDEO_OV7670 is not set
+# CONFIG_VIDEO_MT9V011 is not set
+# CONFIG_VIDEO_TCM825X is not set
+# CONFIG_VIDEO_SAA7110 is not set
+CONFIG_VIDEO_SAA711X=y
+# CONFIG_VIDEO_SAA717X is not set
+# CONFIG_VIDEO_TVP514X is not set
+# CONFIG_VIDEO_TVP5150 is not set
+# CONFIG_VIDEO_VPX3220 is not set
+
+#
+# Video and audio decoders
+#
+# CONFIG_VIDEO_CX25840 is not set
+
+#
+# MPEG video encoders
+#
+# CONFIG_VIDEO_CX2341X is not set
+
+#
+# Video encoders
+#
+# CONFIG_VIDEO_SAA7127 is not set
+# CONFIG_VIDEO_SAA7185 is not set
+# CONFIG_VIDEO_ADV7170 is not set
+# CONFIG_VIDEO_ADV7175 is not set
+# CONFIG_VIDEO_THS7303 is not set
+# CONFIG_VIDEO_ADV7343 is not set
+
+#
+# Video improvement chips
+#
+# CONFIG_VIDEO_UPD64031A is not set
+# CONFIG_VIDEO_UPD64083 is not set
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_SOC_CAMERA is not set
+CONFIG_V4L_USB_DRIVERS=y
+# CONFIG_USB_VIDEO_CLASS is not set
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+CONFIG_USB_GSPCA=m
+# CONFIG_USB_M5602 is not set
+# CONFIG_USB_STV06XX is not set
+# CONFIG_USB_GL860 is not set
+# CONFIG_USB_GSPCA_CONEX is not set
+# CONFIG_USB_GSPCA_ETOMS is not set
+# CONFIG_USB_GSPCA_FINEPIX is not set
+# CONFIG_USB_GSPCA_JEILINJ is not set
+# CONFIG_USB_GSPCA_MARS is not set
+# CONFIG_USB_GSPCA_MR97310A is not set
+# CONFIG_USB_GSPCA_OV519 is not set
+# CONFIG_USB_GSPCA_OV534 is not set
+# CONFIG_USB_GSPCA_PAC207 is not set
+# CONFIG_USB_GSPCA_PAC7302 is not set
+# CONFIG_USB_GSPCA_PAC7311 is not set
+# CONFIG_USB_GSPCA_SN9C20X is not set
+# CONFIG_USB_GSPCA_SONIXB is not set
+# CONFIG_USB_GSPCA_SONIXJ is not set
+# CONFIG_USB_GSPCA_SPCA500 is not set
+# CONFIG_USB_GSPCA_SPCA501 is not set
+# CONFIG_USB_GSPCA_SPCA505 is not set
+# CONFIG_USB_GSPCA_SPCA506 is not set
+# CONFIG_USB_GSPCA_SPCA508 is not set
+# CONFIG_USB_GSPCA_SPCA561 is not set
+# CONFIG_USB_GSPCA_SQ905 is not set
+# CONFIG_USB_GSPCA_SQ905C is not set
+# CONFIG_USB_GSPCA_STK014 is not set
+# CONFIG_USB_GSPCA_STV0680 is not set
+# CONFIG_USB_GSPCA_SUNPLUS is not set
+# CONFIG_USB_GSPCA_T613 is not set
+# CONFIG_USB_GSPCA_TV8532 is not set
+# CONFIG_USB_GSPCA_VC032X is not set
+# CONFIG_USB_GSPCA_ZC3XX is not set
+# CONFIG_VIDEO_PVRUSB2 is not set
+# CONFIG_VIDEO_HDPVR is not set
+# CONFIG_VIDEO_EM28XX is not set
+# CONFIG_VIDEO_CX231XX is not set
+# CONFIG_VIDEO_USBVISION is not set
+# CONFIG_USB_ET61X251 is not set
+# CONFIG_USB_SN9C102 is not set
+# CONFIG_USB_ZC0301 is not set
+CONFIG_USB_PWC_INPUT_EVDEV=y
+# CONFIG_USB_ZR364XX is not set
+# CONFIG_USB_STKWEBCAM is not set
+# CONFIG_USB_S2255 is not set
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_I2C_SI4713 is not set
+# CONFIG_RADIO_SI4713 is not set
+# CONFIG_USB_DSBR is not set
+# CONFIG_RADIO_SI470X is not set
+# CONFIG_USB_MR800 is not set
+# CONFIG_RADIO_TEA5764 is not set
+# CONFIG_RADIO_TEF6862 is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_OF is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_FSL_DIU=y
+# CONFIG_FB_IBM_GXT4500 is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_LOGO is not set
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_DRAGONRISE=y
+# CONFIG_DRAGONRISE_FF is not set
+CONFIG_HID_EZKEY=y
+CONFIG_HID_KYE=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_TWINHAN=y
+CONFIG_HID_KENSINGTON=y
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_NTRIG=y
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+CONFIG_HID_GREENASIA=y
+# CONFIG_GREENASIA_FF is not set
+CONFIG_HID_SMARTJOYPLUS=y
+# CONFIG_SMARTJOYPLUS_FF is not set
+CONFIG_HID_TOPSEED=y
+CONFIG_HID_THRUSTMASTER=y
+# CONFIG_THRUSTMASTER_FF is not set
+CONFIG_HID_ZEROPLUS=y
+# CONFIG_ZEROPLUS_FF is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
+CONFIG_USB_EHCI_BIG_ENDIAN_DESC=y
+# CONFIG_XPS_USB_HCD_XILINX is not set
+CONFIG_USB_EHCI_FSL=y
+CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_EDAC is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+CONFIG_RTC_DRV_M41T80=y
+# CONFIG_RTC_DRV_M41T80_WDT is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_GENERIC is not set
+CONFIG_RTC_DRV_MPC5121=y
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+# CONFIG_FSL_DMA is not set
+CONFIG_MPC512X_DMA=y
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
+# CONFIG_ASYNC_TX_DMA is not set
+# CONFIG_DMATEST is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+CONFIG_EXT2_FS_XIP=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_FS_XIP=y
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=y
+# CONFIG_UBIFS_FS_XATTR is not set
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
+CONFIG_PRINT_STACK_DEPTH=64
+# CONFIG_IRQSTACKS is not set
+# CONFIG_BOOTX_TEXT is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+CONFIG_PPC_CLOCK=y
+CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set

arch/powerpc/configs/ppc64_defconfig

@@ -137,8 +137,9 @@ CONFIG_TRACEPOINTS=y
 CONFIG_MARKERS=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
+CONFIG_KPROBES=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_KRETPROBES=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
@@ -191,6 +192,7 @@ CONFIG_SCANLOG=m
 CONFIG_LPARCFG=y
 CONFIG_PPC_SMLPAR=y
 CONFIG_CMM=y
+CONFIG_DTL=y
 CONFIG_PPC_ISERIES=y
 
 #
@@ -328,9 +330,10 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_KEXEC=y
 # CONFIG_PHYP_DUMP is not set
 CONFIG_IRQ_ALL_CPUS=y
-# CONFIG_NUMA is not set
+CONFIG_NUMA=y
+CONFIG_NODES_SHIFT=8
+CONFIG_MAX_ACTIVE_REGIONS=256
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_DEFAULT=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -339,6 +342,7 @@ CONFIG_SELECT_MEMORY_MODEL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 CONFIG_SPARSEMEM_MANUAL=y
 CONFIG_SPARSEMEM=y
+CONFIG_NEED_MULTIPLE_NODES=y
 CONFIG_HAVE_MEMORY_PRESENT=y
 CONFIG_SPARSEMEM_EXTREME=y
 CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
@@ -354,11 +358,12 @@ CONFIG_PHYS_ADDR_T_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_NODES_SPAN_OTHER_NODES=y
 CONFIG_ARCH_MEMORY_PROBE=y
 CONFIG_PPC_HAS_HASH_64K=y
 # CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=13
-# CONFIG_SCHED_SMT is not set
+CONFIG_SCHED_SMT=y
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 CONFIG_EXTRA_TARGETS=""
@@ -790,12 +795,12 @@ CONFIG_SCSI_IPR=y
 CONFIG_SCSI_IPR_TRACE=y
 CONFIG_SCSI_IPR_DUMP=y
 # CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
+CONFIG_SCSI_QLA_FC=m
 # CONFIG_SCSI_QLA_ISCSI is not set
 CONFIG_SCSI_LPFC=m
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
-CONFIG_SCSI_DEBUG=m
+# CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
 # CONFIG_SCSI_DH is not set
@@ -867,9 +872,8 @@ CONFIG_MD_AUTODETECT=y
 CONFIG_MD_LINEAR=y
 CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
-CONFIG_MD_RAID10=y
-CONFIG_MD_RAID456=y
-CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_RAID10=m
+CONFIG_MD_RAID456=m
 CONFIG_MD_MULTIPATH=m
 CONFIG_MD_FAULTY=m
 CONFIG_BLK_DEV_DM=y
@@ -984,7 +988,7 @@ CONFIG_ACENIC=m
 CONFIG_ACENIC_OMIT_TIGON_I=y
 # CONFIG_DL2K is not set
 CONFIG_E1000=y
-# CONFIG_E1000E is not set
+CONFIG_E1000E=m
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -1006,19 +1010,19 @@ CONFIG_GELIC_WIRELESS=y
 # CONFIG_ATL1E is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T1=m
+CONFIG_CHELSIO_T3=m
 CONFIG_EHEA=m
 # CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
+CONFIG_IXGBE=m
 CONFIG_IXGB=m
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
+CONFIG_S2IO=m
+CONFIG_MYRI10GE=m
+CONFIG_NETXEN_NIC=m
 # CONFIG_NIU is not set
 CONFIG_PASEMI_MAC=y
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
+CONFIG_MLX4_EN=m
+CONFIG_MLX4_CORE=m
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
@@ -1169,7 +1173,7 @@ CONFIG_SERIAL_TXX9=y
 CONFIG_HAS_TXX9_SERIAL=y
 CONFIG_SERIAL_TXX9_NR_UARTS=6
 CONFIG_SERIAL_TXX9_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
+CONFIG_SERIAL_JSM=m
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
@@ -1586,7 +1590,7 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
-# CONFIG_USB_MON is not set
+CONFIG_USB_MON=m
 # CONFIG_USB_WUSB is not set
 # CONFIG_USB_WUSB_CBAF is not set
 
@@ -1686,21 +1690,22 @@ CONFIG_USB_APPLEDISPLAY=m
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 CONFIG_INFINIBAND=m
-# CONFIG_INFINIBAND_USER_MAD is not set
-# CONFIG_INFINIBAND_USER_ACCESS is not set
+CONFIG_INFINIBAND_USER_MAD=m
+CONFIG_INFINIBAND_USER_ACCESS=m
+CONFIG_INFINIBAND_USER_MEM=y
 CONFIG_INFINIBAND_ADDR_TRANS=y
 CONFIG_INFINIBAND_MTHCA=m
 CONFIG_INFINIBAND_MTHCA_DEBUG=y
-# CONFIG_INFINIBAND_IPATH is not set
+CONFIG_INFINIBAND_IPATH=m
 CONFIG_INFINIBAND_EHCA=m
 # CONFIG_INFINIBAND_AMSO1100 is not set
-# CONFIG_MLX4_INFINIBAND is not set
+CONFIG_MLX4_INFINIBAND=m
 # CONFIG_INFINIBAND_NES is not set
 CONFIG_INFINIBAND_IPOIB=m
-# CONFIG_INFINIBAND_IPOIB_CM is not set
+CONFIG_INFINIBAND_IPOIB_CM=y
 CONFIG_INFINIBAND_IPOIB_DEBUG=y
 # CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
-# CONFIG_INFINIBAND_SRP is not set
+CONFIG_INFINIBAND_SRP=m
 CONFIG_INFINIBAND_ISER=m
 CONFIG_EDAC=y
 
@@ -1798,7 +1803,7 @@ CONFIG_REISERFS_FS=y
 CONFIG_REISERFS_FS_XATTR=y
 CONFIG_REISERFS_FS_POSIX_ACL=y
 CONFIG_REISERFS_FS_SECURITY=y
-CONFIG_JFS_FS=y
+CONFIG_JFS_FS=m
 CONFIG_JFS_POSIX_ACL=y
 CONFIG_JFS_SECURITY=y
 # CONFIG_JFS_DEBUG is not set
@@ -1811,14 +1816,22 @@ CONFIG_XFS_POSIX_ACL=y
 # CONFIG_XFS_RT is not set
 # CONFIG_XFS_DEBUG is not set
 # CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
+CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_FS_O2CB=m
+CONFIG_OCFS2_FS_STATS=y
+CONFIG_OCFS2_DEBUG_MASKLOG=y
+# CONFIG_OCFS2_DEBUG_FS is not set
+# CONFIG_OCFS2_COMPAT_JBD is not set
+CONFIG_BTRFS_FS=m
+CONFIG_BTRFS_FS_POSIX_ACL=y
+CONFIG_NILFS2_FS=m
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 # CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=m
-# CONFIG_FUSE_FS is not set
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -1851,7 +1864,7 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
-# CONFIG_CONFIGFS_FS is not set
+CONFIG_CONFIGFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -2075,7 +2088,7 @@ CONFIG_XMON=y
 CONFIG_XMON_DISASSEMBLY=y
 CONFIG_DEBUGGER=y
 CONFIG_IRQSTACKS=y
-# CONFIG_VIRQ_DEBUG is not set
+CONFIG_VIRQ_DEBUG=y
 CONFIG_BOOTX_TEXT=y
 # CONFIG_PPC_EARLY_DEBUG is not set
 

arch/powerpc/configs/pseries_defconfig

@@ -159,7 +159,7 @@ CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_BLK_DEV_IO_TRACE=y
 CONFIG_BLK_DEV_BSG=y
 # CONFIG_BLK_DEV_INTEGRITY is not set
 CONFIG_BLOCK_COMPAT=y
@@ -191,6 +191,7 @@ CONFIG_SCANLOG=m
 CONFIG_LPARCFG=y
 CONFIG_PPC_SMLPAR=y
 CONFIG_CMM=y
+CONFIG_DTL=y
 # CONFIG_PPC_ISERIES is not set
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_MAPLE is not set
@@ -255,7 +256,8 @@ CONFIG_KEXEC=y
 # CONFIG_PHYP_DUMP is not set
 CONFIG_IRQ_ALL_CPUS=y
 CONFIG_NUMA=y
-CONFIG_NODES_SHIFT=4
+CONFIG_NODES_SHIFT=8
+CONFIG_MAX_ACTIVE_REGIONS=256
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_DEFAULT=y
@@ -270,7 +272,9 @@ CONFIG_HAVE_MEMORY_PRESENT=y
 CONFIG_SPARSEMEM_EXTREME=y
 CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
 CONFIG_SPARSEMEM_VMEMMAP=y
-# CONFIG_MEMORY_HOTPLUG is not set
+CONFIG_MEMORY_HOTPLUG=y
+CONFIG_MEMORY_HOTPLUG_SPARSE=y
+CONFIG_MEMORY_HOTREMOVE=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
@@ -705,7 +709,7 @@ CONFIG_MD_LINEAR=y
 CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
 CONFIG_MD_RAID10=m
-# CONFIG_MD_RAID456 is not set
+CONFIG_MD_RAID456=m
 CONFIG_MD_MULTIPATH=m
 CONFIG_MD_FAULTY=m
 CONFIG_BLK_DEV_DM=y
@@ -800,7 +804,7 @@ CONFIG_ACENIC=m
 CONFIG_ACENIC_OMIT_TIGON_I=y
 # CONFIG_DL2K is not set
 CONFIG_E1000=y
-# CONFIG_E1000E is not set
+CONFIG_E1000E=m
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -818,18 +822,18 @@ CONFIG_TIGON3=y
 # CONFIG_ATL1E is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T1=m
+CONFIG_CHELSIO_T3=m
 CONFIG_EHEA=y
 # CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
+CONFIG_IXGBE=m
 CONFIG_IXGB=m
 CONFIG_S2IO=m
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
+CONFIG_MYRI10GE=m
+CONFIG_NETXEN_NIC=m
 # CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
+CONFIG_MLX4_EN=m
+CONFIG_MLX4_CORE=m
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
@@ -894,7 +898,7 @@ CONFIG_INPUT_MOUSEDEV=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
+CONFIG_INPUT_EVDEV=m
 # CONFIG_INPUT_EVBUG is not set
 
 #
@@ -1271,7 +1275,7 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
-CONFIG_USB_MON=y
+CONFIG_USB_MON=m
 # CONFIG_USB_WUSB is not set
 # CONFIG_USB_WUSB_CBAF is not set
 
@@ -1311,7 +1315,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # may also be needed; see USB_STORAGE Help for more information
 #
-CONFIG_USB_STORAGE=y
+CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
@@ -1322,7 +1326,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
 # CONFIG_USB_STORAGE_ALAUDA is not set
-CONFIG_USB_STORAGE_ONETOUCH=y
+# CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
@@ -1377,17 +1381,17 @@ CONFIG_INFINIBAND_USER_MEM=y
 CONFIG_INFINIBAND_ADDR_TRANS=y
 CONFIG_INFINIBAND_MTHCA=m
 CONFIG_INFINIBAND_MTHCA_DEBUG=y
-# CONFIG_INFINIBAND_IPATH is not set
+CONFIG_INFINIBAND_IPATH=m
 CONFIG_INFINIBAND_EHCA=m
 # CONFIG_INFINIBAND_AMSO1100 is not set
-# CONFIG_MLX4_INFINIBAND is not set
+CONFIG_MLX4_INFINIBAND=m
 # CONFIG_INFINIBAND_NES is not set
 CONFIG_INFINIBAND_IPOIB=m
-# CONFIG_INFINIBAND_IPOIB_CM is not set
+CONFIG_INFINIBAND_IPOIB_CM=y
 CONFIG_INFINIBAND_IPOIB_DEBUG=y
 # CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
 CONFIG_INFINIBAND_SRP=m
-# CONFIG_INFINIBAND_ISER is not set
+CONFIG_INFINIBAND_ISER=m
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
@@ -1443,6 +1447,9 @@ CONFIG_OCFS2_FS_STATS=y
 CONFIG_OCFS2_DEBUG_MASKLOG=y
 # CONFIG_OCFS2_DEBUG_FS is not set
 # CONFIG_OCFS2_COMPAT_JBD is not set
+CONFIG_BTRFS_FS=m
+CONFIG_BTRFS_FS_POSIX_ACL=y
+CONFIG_NILFS2_FS=m
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1455,8 +1462,8 @@ CONFIG_FUSE_FS=m
 # CD-ROM/DVD Filesystems
 #
 CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
+# CONFIG_JOLIET is not set
+# CONFIG_ZISOFS is not set
 CONFIG_UDF_FS=m
 CONFIG_UDF_NLS=y
 
@@ -1508,14 +1515,14 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
-CONFIG_NFSD=y
+CONFIG_NFSD=m
 CONFIG_NFSD_V2_ACL=y
 CONFIG_NFSD_V3=y
 CONFIG_NFSD_V3_ACL=y
 CONFIG_NFSD_V4=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
+CONFIG_EXPORTFS=m
 CONFIG_NFS_ACL_SUPPORT=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
@@ -1681,12 +1688,12 @@ CONFIG_DYNAMIC_PRINTK_DEBUG=y
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_DEBUG_STACKOVERFLOW=y
-# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_STACK_USAGE=y
 # CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_HCALL_STATS is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
+CONFIG_CODE_PATCHING_SELFTEST=y
+CONFIG_FTR_FIXUP_SELFTEST=y
+CONFIG_MSI_BITMAP_SELFTEST=y
 CONFIG_XMON=y
 CONFIG_XMON_DEFAULT=y
 CONFIG_XMON_DISASSEMBLY=y

arch/powerpc/include/asm/asm-compat.h

@@ -2,6 +2,7 @@
 #define _ASM_POWERPC_ASM_COMPAT_H
 
 #include <asm/types.h>
+#include <asm/ppc-opcode.h>
 
 #ifdef __ASSEMBLY__
 #  define stringify_in_c(...)	__VA_ARGS__
@@ -24,7 +25,7 @@
 #define PPC_LONG	stringify_in_c(.llong)
 #define PPC_LONG_ALIGN	stringify_in_c(.balign 8)
 #define PPC_TLNEI	stringify_in_c(tdnei)
-#define PPC_LLARX	stringify_in_c(ldarx)
+#define PPC_LLARX(t, a, b, eh)	PPC_LDARX(t, a, b, eh)
 #define PPC_STLCX	stringify_in_c(stdcx.)
 #define PPC_CNTLZL	stringify_in_c(cntlzd)
 
@@ -46,7 +47,7 @@
 #define PPC_LONG	stringify_in_c(.long)
 #define PPC_LONG_ALIGN	stringify_in_c(.balign 4)
 #define PPC_TLNEI	stringify_in_c(twnei)
-#define PPC_LLARX	stringify_in_c(lwarx)
+#define PPC_LLARX(t, a, b, eh)	PPC_LWARX(t, a, b, eh)
 #define PPC_STLCX	stringify_in_c(stwcx.)
 #define PPC_CNTLZL	stringify_in_c(cntlzw)
 #define PPC_MTOCRF	stringify_in_c(mtcrf)

arch/powerpc/include/asm/atomic.h

@@ -49,13 +49,13 @@ static __inline__ int atomic_add_return(int a, atomic_t *v)
 	int t;
 
 	__asm__ __volatile__(
-	LWSYNC_ON_SMP
+	PPC_RELEASE_BARRIER
 "1:	lwarx	%0,0,%2		# atomic_add_return\n\
 	add	%0,%1,%0\n"
 	PPC405_ERR77(0,%2)
 "	stwcx.	%0,0,%2 \n\
 	bne-	1b"
-	ISYNC_ON_SMP
+	PPC_ACQUIRE_BARRIER
 	: "=&r" (t)
 	: "r" (a), "r" (&v->counter)
 	: "cc", "memory");
@@ -85,13 +85,13 @@ static __inline__ int atomic_sub_return(int a, atomic_t *v)
 	int t;
 
 	__asm__ __volatile__(
-	LWSYNC_ON_SMP
+	PPC_RELEASE_BARRIER
 "1:	lwarx	%0,0,%2		# atomic_sub_return\n\
 	subf	%0,%1,%0\n"
 	PPC405_ERR77(0,%2)
 "	stwcx.	%0,0,%2 \n\
 	bne-	1b"
-	ISYNC_ON_SMP
+	PPC_ACQUIRE_BARRIER
 	: "=&r" (t)
 	: "r" (a), "r" (&v->counter)
 	: "cc", "memory");
@@ -119,13 +119,13 @@ static __inline__ int atomic_inc_return(atomic_t *v)
 	int t;
 
 	__asm__ __volatile__(
-	LWSYNC_ON_SMP
+	PPC_RELEASE_BARRIER
 "1:	lwarx	%0,0,%1		# atomic_inc_return\n\
 	addic	%0,%0,1\n"
 	PPC405_ERR77(0,%1)
 "	stwcx.	%0,0,%1 \n\
 	bne-	1b"
-	ISYNC_ON_SMP
+	PPC_ACQUIRE_BARRIER
 	: "=&r" (t)
 	: "r" (&v->counter)
 	: "cc", "xer", "memory");
@@ -163,13 +163,13 @@ static __inline__ int atomic_dec_return(atomic_t *v)
 	int t;
 
 	__asm__ __volatile__(
-	LWSYNC_ON_SMP
+	PPC_RELEASE_BARRIER
 "1:	lwarx	%0,0,%1		# atomic_dec_return\n\
 	addic	%0,%0,-1\n"
 	PPC405_ERR77(0,%1)
 "	stwcx.	%0,0,%1\n\
 	bne-	1b"
-	ISYNC_ON_SMP
+	PPC_ACQUIRE_BARRIER
 	: "=&r" (t)
 	: "r" (&v->counter)
 	: "cc", "xer", "memory");
@@ -194,7 +194,7 @@ static __inline__ int atomic_add_unless(atomic_t *v, int a, int u)
 	int t;
 
 	__asm__ __volatile__ (
-	LWSYNC_ON_SMP
+	PPC_RELEASE_BARRIER
 "1:	lwarx	%0,0,%1		# atomic_add_unless\n\
 	cmpw	0,%0,%3 \n\
 	beq-	2f \n\
@@ -202,7 +202,7 @@ static __inline__ int atomic_add_unless(atomic_t *v, int a, int u)
 	PPC405_ERR77(0,%2)
 "	stwcx.	%0,0,%1 \n\
 	bne-	1b \n"
-	ISYNC_ON_SMP
+	PPC_ACQUIRE_BARRIER
 "	subf	%0,%2,%0 \n\
 2:"
 	: "=&r" (t)
@@ -227,7 +227,7 @@ static __inline__ int atomic_dec_if_positive(atomic_t *v)
 	int t;
 
 	__asm__ __volatile__(
-	LWSYNC_ON_SMP
+	PPC_RELEASE_BARRIER
 "1:	lwarx	%0,0,%1		# atomic_dec_if_positive\n\
 	cmpwi	%0,1\n\
 	addi	%0,%0,-1\n\
@@ -235,7 +235,7 @@ static __inline__ int atomic_dec_if_positive(atomic_t *v)
 	PPC405_ERR77(0,%1)
 "	stwcx.	%0,0,%1\n\
 	bne-	1b"
-	ISYNC_ON_SMP
+	PPC_ACQUIRE_BARRIER
 	"\n\
 2:"	: "=&b" (t)
 	: "r" (&v->counter)
@@ -286,12 +286,12 @@ static __inline__ long atomic64_add_return(long a, atomic64_t *v)
 	long t;
 
 	__asm__ __volatile__(
-	LWSYNC_ON_SMP
+	PPC_RELEASE_BARRIER
 "1:	ldarx	%0,0,%2		# atomic64_add_return\n\
 	add	%0,%1,%0\n\
 	stdcx.	%0,0,%2 \n\
 	bne-	1b"
-	ISYNC_ON_SMP
+	PPC_ACQUIRE_BARRIER
 	: "=&r" (t)
 	: "r" (a), "r" (&v->counter)
 	: "cc", "memory");
@@ -320,12 +320,12 @@ static __inline__ long atomic64_sub_return(long a, atomic64_t *v)
 	long t;
 
 	__asm__ __volatile__(
-	LWSYNC_ON_SMP
+	PPC_RELEASE_BARRIER
 "1:	ldarx	%0,0,%2		# atomic64_sub_return\n\
 	subf	%0,%1,%0\n\
 	stdcx.	%0,0,%2 \n\
 	bne-	1b"
-	ISYNC_ON_SMP
+	PPC_ACQUIRE_BARRIER
 	: "=&r" (t)
 	: "r" (a), "r" (&v->counter)
 	: "cc", "memory");
@@ -352,12 +352,12 @@ static __inline__ long atomic64_inc_return(atomic64_t *v)
 	long t;
 
 	__asm__ __volatile__(
-	LWSYNC_ON_SMP
+	PPC_RELEASE_BARRIER
 "1:	ldarx	%0,0,%1		# atomic64_inc_return\n\
 	addic	%0,%0,1\n\
 	stdcx.	%0,0,%1 \n\
 	bne-	1b"
-	ISYNC_ON_SMP
+	PPC_ACQUIRE_BARRIER
 	: "=&r" (t)
 	: "r" (&v->counter)
 	: "cc", "xer", "memory");
@@ -394,12 +394,12 @@ static __inline__ long atomic64_dec_return(atomic64_t *v)
 	long t;
 
 	__asm__ __volatile__(
-	LWSYNC_ON_SMP
+	PPC_RELEASE_BARRIER
 "1:	ldarx	%0,0,%1		# atomic64_dec_return\n\
 	addic	%0,%0,-1\n\
 	stdcx.	%0,0,%1\n\
 	bne-	1b"
-	ISYNC_ON_SMP
+	PPC_ACQUIRE_BARRIER
 	: "=&r" (t)
 	: "r" (&v->counter)
 	: "cc", "xer", "memory");
@@ -419,13 +419,13 @@ static __inline__ long atomic64_dec_if_positive(atomic64_t *v)
 	long t;
 
 	__asm__ __volatile__(
-	LWSYNC_ON_SMP
+	PPC_RELEASE_BARRIER
 "1:	ldarx	%0,0,%1		# atomic64_dec_if_positive\n\
 	addic.	%0,%0,-1\n\
 	blt-	2f\n\
 	stdcx.	%0,0,%1\n\
 	bne-	1b"
-	ISYNC_ON_SMP
+	PPC_ACQUIRE_BARRIER
 	"\n\
 2:"	: "=&r" (t)
 	: "r" (&v->counter)
@@ -451,14 +451,14 @@ static __inline__ int atomic64_add_unless(atomic64_t *v, long a, long u)
 	long t;
 
 	__asm__ __volatile__ (
-	LWSYNC_ON_SMP
+	PPC_RELEASE_BARRIER
 "1:	ldarx	%0,0,%1		# atomic_add_unless\n\
 	cmpd	0,%0,%3 \n\
 	beq-	2f \n\
 	add	%0,%2,%0 \n"
 "	stdcx.	%0,0,%1 \n\
 	bne-	1b \n"
-	ISYNC_ON_SMP
+	PPC_ACQUIRE_BARRIER
 "	subf	%0,%2,%0 \n\
 2:"
 	: "=&r" (t)

arch/powerpc/include/asm/bitops.h

@@ -65,7 +65,7 @@ static __inline__ void fn(unsigned long mask,	\
 	unsigned long *p = (unsigned long *)_p;	\
 	__asm__ __volatile__ (			\
 	prefix					\
-"1:"	PPC_LLARX "%0,0,%3\n"			\
+"1:"	PPC_LLARX(%0,0,%3,0) "\n"		\
 	stringify_in_c(op) "%0,%0,%2\n"		\
 	PPC405_ERR77(0,%3)			\
 	PPC_STLCX "%0,0,%3\n"			\
@@ -78,7 +78,7 @@ static __inline__ void fn(unsigned long mask,	\
 
 DEFINE_BITOP(set_bits, or, "", "")
 DEFINE_BITOP(clear_bits, andc, "", "")
-DEFINE_BITOP(clear_bits_unlock, andc, LWSYNC_ON_SMP, "")
+DEFINE_BITOP(clear_bits_unlock, andc, PPC_RELEASE_BARRIER, "")
 DEFINE_BITOP(change_bits, xor, "", "")
 
 static __inline__ void set_bit(int nr, volatile unsigned long *addr)
@@ -103,31 +103,35 @@ static __inline__ void change_bit(int nr, volatile unsigned long *addr)
 
 /* Like DEFINE_BITOP(), with changes to the arguments to 'op' and the output
  * operands. */
-#define DEFINE_TESTOP(fn, op, prefix, postfix)	\
-static __inline__ unsigned long fn(		\
-		unsigned long mask,		\
-		volatile unsigned long *_p)	\
-{						\
-	unsigned long old, t;			\
-	unsigned long *p = (unsigned long *)_p;	\
-	__asm__ __volatile__ (			\
-	prefix					\
-"1:"	PPC_LLARX "%0,0,%3\n"			\
-	stringify_in_c(op) "%1,%0,%2\n"		\
-	PPC405_ERR77(0,%3)			\
-	PPC_STLCX "%1,0,%3\n"			\
-	"bne- 1b\n"				\
-	postfix					\
-	: "=&r" (old), "=&r" (t)		\
-	: "r" (mask), "r" (p)			\
-	: "cc", "memory");			\
-	return (old & mask);			\
+#define DEFINE_TESTOP(fn, op, prefix, postfix, eh)	\
+static __inline__ unsigned long fn(			\
+		unsigned long mask,			\
+		volatile unsigned long *_p)		\
+{							\
+	unsigned long old, t;				\
+	unsigned long *p = (unsigned long *)_p;		\
+	__asm__ __volatile__ (				\
+	prefix						\
+"1:"	PPC_LLARX(%0,0,%3,eh) "\n"			\
+	stringify_in_c(op) "%1,%0,%2\n"			\
+	PPC405_ERR77(0,%3)				\
+	PPC_STLCX "%1,0,%3\n"				\
+	"bne- 1b\n"					\
+	postfix						\
+	: "=&r" (old), "=&r" (t)			\
+	: "r" (mask), "r" (p)				\
+	: "cc", "memory");				\
+	return (old & mask);				\
 }
 
-DEFINE_TESTOP(test_and_set_bits, or, LWSYNC_ON_SMP, ISYNC_ON_SMP)
-DEFINE_TESTOP(test_and_set_bits_lock, or, "", ISYNC_ON_SMP)
-DEFINE_TESTOP(test_and_clear_bits, andc, LWSYNC_ON_SMP, ISYNC_ON_SMP)
-DEFINE_TESTOP(test_and_change_bits, xor, LWSYNC_ON_SMP, ISYNC_ON_SMP)
+DEFINE_TESTOP(test_and_set_bits, or, PPC_RELEASE_BARRIER,
+	      PPC_ACQUIRE_BARRIER, 0)
+DEFINE_TESTOP(test_and_set_bits_lock, or, "",
+	      PPC_ACQUIRE_BARRIER, 1)
+DEFINE_TESTOP(test_and_clear_bits, andc, PPC_RELEASE_BARRIER,
+	      PPC_ACQUIRE_BARRIER, 0)
+DEFINE_TESTOP(test_and_change_bits, xor, PPC_RELEASE_BARRIER,
+	      PPC_ACQUIRE_BARRIER, 0)
 
 static __inline__ int test_and_set_bit(unsigned long nr,
 				       volatile unsigned long *addr)
@@ -158,7 +162,7 @@ static __inline__ int test_and_change_bit(unsigned long nr,
 
 static __inline__ void __clear_bit_unlock(int nr, volatile unsigned long *addr)
 {
-	__asm__ __volatile__(LWSYNC_ON_SMP "" ::: "memory");
+	__asm__ __volatile__(PPC_RELEASE_BARRIER "" ::: "memory");
 	__clear_bit(nr, addr);
 }
 

arch/powerpc/include/asm/cputable.h

@@ -381,9 +381,9 @@ extern const char *powerpc_base_platform;
 #define CPU_FTRS_GENERIC_32	(CPU_FTR_COMMON | CPU_FTR_NODSISRALIGN)
 
 /* 64-bit CPUs */
-#define CPU_FTRS_POWER3	(CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
+#define CPU_FTRS_POWER3	(CPU_FTR_USE_TB | \
 	    CPU_FTR_IABR | CPU_FTR_PPC_LE)
-#define CPU_FTRS_RS64	(CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
+#define CPU_FTRS_RS64	(CPU_FTR_USE_TB | \
 	    CPU_FTR_IABR | \
 	    CPU_FTR_MMCRA | CPU_FTR_CTRL)
 #define CPU_FTRS_POWER4	(CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \

arch/powerpc/include/asm/cputime.h

@@ -73,10 +73,9 @@ static inline unsigned long cputime_to_jiffies(const cputime_t ct)
 static inline cputime_t cputime_to_scaled(const cputime_t ct)
 {
 	if (cpu_has_feature(CPU_FTR_SPURR) &&
-	    per_cpu(cputime_last_delta, smp_processor_id()))
-		return ct *
-			per_cpu(cputime_scaled_last_delta, smp_processor_id())/
-			per_cpu(cputime_last_delta, smp_processor_id());
+	    __get_cpu_var(cputime_last_delta))
+		return ct * __get_cpu_var(cputime_scaled_last_delta) /
+			    __get_cpu_var(cputime_last_delta);
 	return ct;
 }
 

arch/powerpc/include/asm/feature-fixups.h

@@ -165,7 +165,7 @@ label##2:						\
 	.pushsection sect,"a";				\
 	.align 2;					\
 label##3:					       	\
-	.long label##1b-label##3b;			\
+	FTR_ENTRY_OFFSET label##1b-label##3b;		\
 	.popsection;
 
 #endif /* __ASM_POWERPC_FEATURE_FIXUPS_H */

arch/powerpc/include/asm/futex.h

@@ -11,7 +11,7 @@
 
 #define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \
   __asm__ __volatile ( \
-	LWSYNC_ON_SMP \
+	PPC_RELEASE_BARRIER \
 "1:	lwarx	%0,0,%2\n" \
 	insn \
 	PPC405_ERR77(0, %2) \
@@ -90,14 +90,14 @@ futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval)
 		return -EFAULT;
 
         __asm__ __volatile__ (
-        LWSYNC_ON_SMP
+        PPC_RELEASE_BARRIER
 "1:     lwarx   %0,0,%2         # futex_atomic_cmpxchg_inatomic\n\
         cmpw    0,%0,%3\n\
         bne-    3f\n"
         PPC405_ERR77(0,%2)
 "2:     stwcx.  %4,0,%2\n\
         bne-    1b\n"
-        ISYNC_ON_SMP
+        PPC_ACQUIRE_BARRIER
 "3:	.section .fixup,\"ax\"\n\
 4:	li	%0,%5\n\
 	b	3b\n\

arch/powerpc/include/asm/hardirq.h

@@ -1 +1,29 @@
-#include <asm-generic/hardirq.h>
+#ifndef _ASM_POWERPC_HARDIRQ_H
+#define _ASM_POWERPC_HARDIRQ_H
+
+#include <linux/threads.h>
+#include <linux/irq.h>
+
+typedef struct {
+	unsigned int __softirq_pending;
+	unsigned int timer_irqs;
+	unsigned int pmu_irqs;
+	unsigned int mce_exceptions;
+	unsigned int spurious_irqs;
+} ____cacheline_aligned irq_cpustat_t;
+
+DECLARE_PER_CPU_SHARED_ALIGNED(irq_cpustat_t, irq_stat);
+
+#define __ARCH_IRQ_STAT
+
+#define local_softirq_pending()	__get_cpu_var(irq_stat).__softirq_pending
+
+static inline void ack_bad_irq(unsigned int irq)
+{
+	printk(KERN_CRIT "unexpected IRQ trap at vector %02x\n", irq);
+}
+
+extern u64 arch_irq_stat_cpu(unsigned int cpu);
+#define arch_irq_stat_cpu	arch_irq_stat_cpu
+
+#endif /* _ASM_POWERPC_HARDIRQ_H */

arch/powerpc/include/asm/local.h

@@ -24,7 +24,7 @@ static __inline__ long local_add_return(long a, local_t *l)
 	long t;
 
 	__asm__ __volatile__(
-"1:"	PPC_LLARX	"%0,0,%2		# local_add_return\n\
+"1:"	PPC_LLARX(%0,0,%2,0) "			# local_add_return\n\
 	add	%0,%1,%0\n"
 	PPC405_ERR77(0,%2)
 	PPC_STLCX	"%0,0,%2 \n\
@@ -43,7 +43,7 @@ static __inline__ long local_sub_return(long a, local_t *l)
 	long t;
 
 	__asm__ __volatile__(
-"1:"	PPC_LLARX	"%0,0,%2		# local_sub_return\n\
+"1:"	PPC_LLARX(%0,0,%2,0) "			# local_sub_return\n\
 	subf	%0,%1,%0\n"
 	PPC405_ERR77(0,%2)
 	PPC_STLCX	"%0,0,%2 \n\
@@ -60,7 +60,7 @@ static __inline__ long local_inc_return(local_t *l)
 	long t;
 
 	__asm__ __volatile__(
-"1:"	PPC_LLARX	"%0,0,%1		# local_inc_return\n\
+"1:"	PPC_LLARX(%0,0,%1,0) "			# local_inc_return\n\
 	addic	%0,%0,1\n"
 	PPC405_ERR77(0,%1)
 	PPC_STLCX	"%0,0,%1 \n\
@@ -87,7 +87,7 @@ static __inline__ long local_dec_return(local_t *l)
 	long t;
 
 	__asm__ __volatile__(
-"1:"	PPC_LLARX	"%0,0,%1		# local_dec_return\n\
+"1:"	PPC_LLARX(%0,0,%1,0) "			# local_dec_return\n\
 	addic	%0,%0,-1\n"
 	PPC405_ERR77(0,%1)
 	PPC_STLCX	"%0,0,%1\n\
@@ -117,7 +117,7 @@ static __inline__ int local_add_unless(local_t *l, long a, long u)
 	long t;
 
 	__asm__ __volatile__ (
-"1:"	PPC_LLARX	"%0,0,%1		# local_add_unless\n\
+"1:"	PPC_LLARX(%0,0,%1,0) "			# local_add_unless\n\
 	cmpw	0,%0,%3 \n\
 	beq-	2f \n\
 	add	%0,%2,%0 \n"
@@ -147,7 +147,7 @@ static __inline__ long local_dec_if_positive(local_t *l)
 	long t;
 
 	__asm__ __volatile__(
-"1:"	PPC_LLARX	"%0,0,%1		# local_dec_if_positive\n\
+"1:"	PPC_LLARX(%0,0,%1,0) "			# local_dec_if_positive\n\
 	cmpwi	%0,1\n\
 	addi	%0,%0,-1\n\
 	blt-	2f\n"

arch/powerpc/include/asm/mpc5121.h

@@ -0,0 +1,24 @@
+/*
+ * MPC5121 Prototypes and definitions
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.
+ */
+
+#ifndef __ASM_POWERPC_MPC5121_H__
+#define __ASM_POWERPC_MPC5121_H__
+
+/* MPC512x Reset module registers */
+struct mpc512x_reset_module {
+	u32	rcwlr;	/* Reset Configuration Word Low Register */
+	u32	rcwhr;	/* Reset Configuration Word High Register */
+	u32	reserved1;
+	u32	reserved2;
+	u32	rsr;	/* Reset Status Register */
+	u32	rmr;	/* Reset Mode Register */
+	u32	rpr;	/* Reset Protection Register */
+	u32	rcr;	/* Reset Control Register */
+	u32	rcer;	/* Reset Control Enable Register */
+};
+
+#endif /* __ASM_POWERPC_MPC5121_H__ */

arch/powerpc/include/asm/mpc52xx_psc.h

@@ -25,7 +25,11 @@
 #include <asm/types.h>
 
 /* Max number of PSCs */
+#ifdef CONFIG_PPC_MPC512x
+#define MPC52xx_PSC_MAXNUM     12
+#else
 #define MPC52xx_PSC_MAXNUM	6
+#endif
 
 /* Programmable Serial Controller (PSC) status register bits */
 #define MPC52xx_PSC_SR_UNEX_RX	0x0001

arch/powerpc/include/asm/mpic.h

@@ -289,7 +289,7 @@ struct mpic
 #ifdef CONFIG_MPIC_U3_HT_IRQS
 	/* The fixup table */
 	struct mpic_irq_fixup	*fixups;
-	spinlock_t		fixup_lock;
+	raw_spinlock_t	fixup_lock;
 #endif
 
 	/* Register access method */

arch/powerpc/include/asm/mutex.h

@@ -15,7 +15,7 @@ static inline int __mutex_cmpxchg_lock(atomic_t *v, int old, int new)
 	PPC405_ERR77(0,%1)
 "	stwcx.	%3,0,%1\n\
 	bne-	1b"
-	ISYNC_ON_SMP
+	PPC_ACQUIRE_BARRIER
 	"\n\
 2:"
 	: "=&r" (t)
@@ -35,7 +35,7 @@ static inline int __mutex_dec_return_lock(atomic_t *v)
 	PPC405_ERR77(0,%1)
 "	stwcx.	%0,0,%1\n\
 	bne-	1b"
-	ISYNC_ON_SMP
+	PPC_ACQUIRE_BARRIER
 	: "=&r" (t)
 	: "r" (&v->counter)
 	: "cc", "memory");
@@ -48,7 +48,7 @@ static inline int __mutex_inc_return_unlock(atomic_t *v)
 	int t;
 
 	__asm__ __volatile__(
-	LWSYNC_ON_SMP
+	PPC_RELEASE_BARRIER
 "1:	lwarx	%0,0,%1		# mutex unlock\n\
 	addic	%0,%0,1\n"
 	PPC405_ERR77(0,%1)

arch/powerpc/include/asm/param.h

@@ -1,22 +1 @@
-#ifndef _ASM_POWERPC_PARAM_H
-#define _ASM_POWERPC_PARAM_H
-
-#ifdef __KERNEL__
-#define HZ		CONFIG_HZ	/* internal kernel timer frequency */
-#define USER_HZ		100		/* for user interfaces in "ticks" */
-#define CLOCKS_PER_SEC	(USER_HZ)	/* frequency at which times() counts */
-#endif /* __KERNEL__ */
-
-#ifndef HZ
-#define HZ 100
-#endif
-
-#define EXEC_PAGESIZE	4096
-
-#ifndef NOGROUP
-#define NOGROUP		(-1)
-#endif
-
-#define MAXHOSTNAMELEN	64	/* max length of hostname */
-
-#endif	/* _ASM_POWERPC_PARAM_H */
+#include <asm-generic/param.h>

arch/powerpc/include/asm/pmac_feature.h

@@ -378,7 +378,7 @@ extern struct macio_chip* macio_find(struct device_node* child, int type);
  * Those are exported by pmac feature for internal use by arch code
  * only like the platform function callbacks, do not use directly in drivers
  */
-extern spinlock_t feature_lock;
+extern raw_spinlock_t feature_lock;
 extern struct device_node *uninorth_node;
 extern u32 __iomem *uninorth_base;
 

arch/powerpc/include/asm/ppc-opcode.h

@@ -22,8 +22,10 @@
 #define PPC_INST_DCBZL			0x7c2007ec
 #define PPC_INST_ISEL			0x7c00001e
 #define PPC_INST_ISEL_MASK		0xfc00003e
+#define PPC_INST_LDARX			0x7c0000a8
 #define PPC_INST_LSWI			0x7c0004aa
 #define PPC_INST_LSWX			0x7c00042a
+#define PPC_INST_LWARX			0x7c000029
 #define PPC_INST_LWSYNC			0x7c2004ac
 #define PPC_INST_LXVD2X			0x7c000698
 #define PPC_INST_MCRXR			0x7c000400
@@ -55,15 +57,31 @@
 #define __PPC_RA(a)	(((a) & 0x1f) << 16)
 #define __PPC_RB(b)	(((b) & 0x1f) << 11)
 #define __PPC_RS(s)	(((s) & 0x1f) << 21)
+#define __PPC_RT(s)	__PPC_RS(s)
 #define __PPC_XS(s)	((((s) & 0x1f) << 21) | (((s) & 0x20) >> 5))
 #define __PPC_T_TLB(t)	(((t) & 0x3) << 21)
 #define __PPC_WC(w)	(((w) & 0x3) << 21)
+/*
+ * Only use the larx hint bit on 64bit CPUs. Once we verify it doesn't have
+ * any side effects on all 32bit processors, we can do this all the time.
+ */
+#ifdef CONFIG_PPC64
+#define __PPC_EH(eh)	(((eh) & 0x1) << 0)
+#else
+#define __PPC_EH(eh)	0
+#endif
 
 /* Deal with instructions that older assemblers aren't aware of */
 #define	PPC_DCBAL(a, b)		stringify_in_c(.long PPC_INST_DCBAL | \
 					__PPC_RA(a) | __PPC_RB(b))
 #define	PPC_DCBZL(a, b)		stringify_in_c(.long PPC_INST_DCBZL | \
 					__PPC_RA(a) | __PPC_RB(b))
+#define PPC_LDARX(t, a, b, eh)	stringify_in_c(.long PPC_INST_LDARX | \
+					__PPC_RT(t) | __PPC_RA(a) | \
+					__PPC_RB(b) | __PPC_EH(eh))
+#define PPC_LWARX(t, a, b, eh)	stringify_in_c(.long PPC_INST_LWARX | \
+					__PPC_RT(t) | __PPC_RA(a) | \
+					__PPC_RB(b) | __PPC_EH(eh))
 #define PPC_MSGSND(b)		stringify_in_c(.long PPC_INST_MSGSND | \
 					__PPC_RB(b))
 #define PPC_RFCI		stringify_in_c(.long PPC_INST_RFCI)

arch/powerpc/include/asm/ppc-pci.h

@@ -137,6 +137,11 @@ struct device_node * find_device_pe(struct device_node *dn);
 void eeh_sysfs_add_device(struct pci_dev *pdev);
 void eeh_sysfs_remove_device(struct pci_dev *pdev);
 
+static inline const char *eeh_pci_name(struct pci_dev *pdev) 
+{ 
+	return pdev ? pci_name(pdev) : "<null>";
+} 
+
 #endif /* CONFIG_EEH */
 
 #else /* CONFIG_PCI */

arch/powerpc/include/asm/processor.h

@@ -161,9 +161,41 @@ struct thread_struct {
 #ifdef CONFIG_PPC32
 	void		*pgdir;		/* root of page-table tree */
 #endif
-#if defined(CONFIG_4xx) || defined (CONFIG_BOOKE)
-	unsigned long	dbcr0;		/* debug control register values */
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
+	/*
+	 * The following help to manage the use of Debug Control Registers
+	 * om the BookE platforms.
+	 */
+	unsigned long	dbcr0;
 	unsigned long	dbcr1;
+#ifdef CONFIG_BOOKE
+	unsigned long	dbcr2;
+#endif
+	/*
+	 * The stored value of the DBSR register will be the value at the
+	 * last debug interrupt. This register can only be read from the
+	 * user (will never be written to) and has value while helping to
+	 * describe the reason for the last debug trap.  Torez
+	 */
+	unsigned long	dbsr;
+	/*
+	 * The following will contain addresses used by debug applications
+	 * to help trace and trap on particular address locations.
+	 * The bits in the Debug Control Registers above help define which
+	 * of the following registers will contain valid data and/or addresses.
+	 */
+	unsigned long	iac1;
+	unsigned long	iac2;
+#if CONFIG_PPC_ADV_DEBUG_IACS > 2
+	unsigned long	iac3;
+	unsigned long	iac4;
+#endif
+	unsigned long	dac1;
+	unsigned long	dac2;
+#if CONFIG_PPC_ADV_DEBUG_DVCS > 0
+	unsigned long	dvc1;
+	unsigned long	dvc2;
+#endif
 #endif
 	/* FP and VSX 0-31 register set */
 	double		fpr[32][TS_FPRWIDTH];

arch/powerpc/include/asm/ptrace.h

@@ -24,6 +24,12 @@
  * 2 of the License, or (at your option) any later version.
  */
 
+#ifdef __KERNEL__
+#include <linux/types.h>
+#else
+#include <stdint.h>
+#endif
+
 #ifndef __ASSEMBLY__
 
 struct pt_regs {
@@ -294,4 +300,75 @@ extern void user_disable_single_step(struct task_struct *);
 
 #define PTRACE_SINGLEBLOCK	0x100	/* resume execution until next branch */
 
+#define PPC_PTRACE_GETHWDBGINFO	0x89
+#define PPC_PTRACE_SETHWDEBUG	0x88
+#define PPC_PTRACE_DELHWDEBUG	0x87
+
+#ifndef __ASSEMBLY__
+
+struct ppc_debug_info {
+	uint32_t version;		/* Only version 1 exists to date */
+	uint32_t num_instruction_bps;
+	uint32_t num_data_bps;
+	uint32_t num_condition_regs;
+	uint32_t data_bp_alignment;
+	uint32_t sizeof_condition;	/* size of the DVC register */
+	uint64_t features;
+};
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * features will have bits indication whether there is support for:
+ */
+#define PPC_DEBUG_FEATURE_INSN_BP_RANGE		0x0000000000000001
+#define PPC_DEBUG_FEATURE_INSN_BP_MASK		0x0000000000000002
+#define PPC_DEBUG_FEATURE_DATA_BP_RANGE		0x0000000000000004
+#define PPC_DEBUG_FEATURE_DATA_BP_MASK		0x0000000000000008
+
+#ifndef __ASSEMBLY__
+
+struct ppc_hw_breakpoint {
+	uint32_t version;		/* currently, version must be 1 */
+	uint32_t trigger_type;		/* only some combinations allowed */
+	uint32_t addr_mode;		/* address match mode */
+	uint32_t condition_mode;	/* break/watchpoint condition flags */
+	uint64_t addr;			/* break/watchpoint address */
+	uint64_t addr2;			/* range end or mask */
+	uint64_t condition_value;	/* contents of the DVC register */
+};
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * Trigger Type
+ */
+#define PPC_BREAKPOINT_TRIGGER_EXECUTE	0x00000001
+#define PPC_BREAKPOINT_TRIGGER_READ	0x00000002
+#define PPC_BREAKPOINT_TRIGGER_WRITE	0x00000004
+#define PPC_BREAKPOINT_TRIGGER_RW	\
+	(PPC_BREAKPOINT_TRIGGER_READ | PPC_BREAKPOINT_TRIGGER_WRITE)
+
+/*
+ * Address Mode
+ */
+#define PPC_BREAKPOINT_MODE_EXACT		0x00000000
+#define PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE	0x00000001
+#define PPC_BREAKPOINT_MODE_RANGE_EXCLUSIVE	0x00000002
+#define PPC_BREAKPOINT_MODE_MASK		0x00000003
+
+/*
+ * Condition Mode
+ */
+#define PPC_BREAKPOINT_CONDITION_MODE	0x00000003
+#define PPC_BREAKPOINT_CONDITION_NONE	0x00000000
+#define PPC_BREAKPOINT_CONDITION_AND	0x00000001
+#define PPC_BREAKPOINT_CONDITION_EXACT	PPC_BREAKPOINT_CONDITION_AND
+#define PPC_BREAKPOINT_CONDITION_OR	0x00000002
+#define PPC_BREAKPOINT_CONDITION_AND_OR	0x00000003
+#define PPC_BREAKPOINT_CONDITION_BE_ALL	0x00ff0000
+#define PPC_BREAKPOINT_CONDITION_BE_SHIFT	16
+#define PPC_BREAKPOINT_CONDITION_BE(n)	\
+	(1<<((n)+PPC_BREAKPOINT_CONDITION_BE_SHIFT))
+
 #endif /* _ASM_POWERPC_PTRACE_H */

arch/powerpc/include/asm/reg_booke.h

@@ -248,6 +248,8 @@
 #define DBSR_RET	0x00008000	/* Return Debug Event */
 #define DBSR_CIRPT	0x00000040	/* Critical Interrupt Taken Event */
 #define DBSR_CRET	0x00000020	/* Critical Return Debug Event */
+#define DBSR_IAC12ATS	0x00000002	/* Instr Address Compare 1/2 Toggle */
+#define DBSR_IAC34ATS	0x00000001	/* Instr Address Compare 3/4 Toggle */
 #endif
 #ifdef CONFIG_40x
 #define DBSR_IC		0x80000000	/* Instruction Completion */
@@ -313,6 +315,38 @@
 #define DBCR0_IA12T	0x00008000	/* Instr Addr 1-2 range Toggle */
 #define DBCR0_IA34T	0x00004000	/* Instr Addr 3-4 range Toggle */
 #define DBCR0_FT	0x00000001	/* Freeze Timers on debug event */
+
+#define dbcr_iac_range(task)	((task)->thread.dbcr0)
+#define DBCR_IAC12I	DBCR0_IA12			/* Range Inclusive */
+#define DBCR_IAC12X	(DBCR0_IA12 | DBCR0_IA12X)	/* Range Exclusive */
+#define DBCR_IAC12MODE	(DBCR0_IA12 | DBCR0_IA12X)	/* IAC 1-2 Mode Bits */
+#define DBCR_IAC34I	DBCR0_IA34			/* Range Inclusive */
+#define DBCR_IAC34X	(DBCR0_IA34 | DBCR0_IA34X)	/* Range Exclusive */
+#define DBCR_IAC34MODE	(DBCR0_IA34 | DBCR0_IA34X)	/* IAC 3-4 Mode Bits */
+
+/* Bit definitions related to the DBCR1. */
+#define DBCR1_DAC1R	0x80000000	/* DAC1 Read Debug Event */
+#define DBCR1_DAC2R	0x40000000	/* DAC2 Read Debug Event */
+#define DBCR1_DAC1W	0x20000000	/* DAC1 Write Debug Event */
+#define DBCR1_DAC2W	0x10000000	/* DAC2 Write Debug Event */
+
+#define dbcr_dac(task)	((task)->thread.dbcr1)
+#define DBCR_DAC1R	DBCR1_DAC1R
+#define DBCR_DAC1W	DBCR1_DAC1W
+#define DBCR_DAC2R	DBCR1_DAC2R
+#define DBCR_DAC2W	DBCR1_DAC2W
+
+/*
+ * Are there any active Debug Events represented in the
+ * Debug Control Registers?
+ */
+#define DBCR0_ACTIVE_EVENTS	(DBCR0_ICMP | DBCR0_IAC1 | DBCR0_IAC2 | \
+				 DBCR0_IAC3 | DBCR0_IAC4)
+#define DBCR1_ACTIVE_EVENTS	(DBCR1_DAC1R | DBCR1_DAC2R | \
+				 DBCR1_DAC1W | DBCR1_DAC2W)
+#define DBCR_ACTIVE_EVENTS(dbcr0, dbcr1)  (((dbcr0) & DBCR0_ACTIVE_EVENTS) || \
+					   ((dbcr1) & DBCR1_ACTIVE_EVENTS))
+
 #elif defined(CONFIG_BOOKE)
 #define DBCR0_EDM	0x80000000	/* External Debug Mode */
 #define DBCR0_IDM	0x40000000	/* Internal Debug Mode */
@@ -342,19 +376,79 @@
 #define DBCR0_CRET	0x00000020	/* Critical Return Debug Event */
 #define DBCR0_FT	0x00000001	/* Freeze Timers on debug event */
 
+#define dbcr_dac(task)	((task)->thread.dbcr0)
+#define DBCR_DAC1R	DBCR0_DAC1R
+#define DBCR_DAC1W	DBCR0_DAC1W
+#define DBCR_DAC2R	DBCR0_DAC2R
+#define DBCR_DAC2W	DBCR0_DAC2W
+
 /* Bit definitions related to the DBCR1. */
+#define DBCR1_IAC1US	0xC0000000	/* Instr Addr Cmp 1 Sup/User   */
+#define DBCR1_IAC1ER	0x30000000	/* Instr Addr Cmp 1 Eff/Real */
+#define DBCR1_IAC1ER_01	0x10000000	/* reserved */
+#define DBCR1_IAC1ER_10	0x20000000	/* Instr Addr Cmp 1 Eff/Real MSR[IS]=0 */
+#define DBCR1_IAC1ER_11	0x30000000	/* Instr Addr Cmp 1 Eff/Real MSR[IS]=1 */
+#define DBCR1_IAC2US	0x0C000000	/* Instr Addr Cmp 2 Sup/User   */
+#define DBCR1_IAC2ER	0x03000000	/* Instr Addr Cmp 2 Eff/Real */
+#define DBCR1_IAC2ER_01	0x01000000	/* reserved */
+#define DBCR1_IAC2ER_10	0x02000000	/* Instr Addr Cmp 2 Eff/Real MSR[IS]=0 */
+#define DBCR1_IAC2ER_11	0x03000000	/* Instr Addr Cmp 2 Eff/Real MSR[IS]=1 */
 #define DBCR1_IAC12M	0x00800000	/* Instr Addr 1-2 range enable */
 #define DBCR1_IAC12MX	0x00C00000	/* Instr Addr 1-2 range eXclusive */
 #define DBCR1_IAC12AT	0x00010000	/* Instr Addr 1-2 range Toggle */
+#define DBCR1_IAC3US	0x0000C000	/* Instr Addr Cmp 3 Sup/User   */
+#define DBCR1_IAC3ER	0x00003000	/* Instr Addr Cmp 3 Eff/Real */
+#define DBCR1_IAC3ER_01	0x00001000	/* reserved */
+#define DBCR1_IAC3ER_10	0x00002000	/* Instr Addr Cmp 3 Eff/Real MSR[IS]=0 */
+#define DBCR1_IAC3ER_11	0x00003000	/* Instr Addr Cmp 3 Eff/Real MSR[IS]=1 */
+#define DBCR1_IAC4US	0x00000C00	/* Instr Addr Cmp 4 Sup/User   */
+#define DBCR1_IAC4ER	0x00000300	/* Instr Addr Cmp 4 Eff/Real */
+#define DBCR1_IAC4ER_01	0x00000100	/* Instr Addr Cmp 4 Eff/Real MSR[IS]=0 */
+#define DBCR1_IAC4ER_10	0x00000200	/* Instr Addr Cmp 4 Eff/Real MSR[IS]=0 */
+#define DBCR1_IAC4ER_11	0x00000300	/* Instr Addr Cmp 4 Eff/Real MSR[IS]=1 */
 #define DBCR1_IAC34M	0x00000080	/* Instr Addr 3-4 range enable */
 #define DBCR1_IAC34MX	0x000000C0	/* Instr Addr 3-4 range eXclusive */
 #define DBCR1_IAC34AT	0x00000001	/* Instr Addr 3-4 range Toggle */
 
+#define dbcr_iac_range(task)	((task)->thread.dbcr1)
+#define DBCR_IAC12I	DBCR1_IAC12M	/* Range Inclusive */
+#define DBCR_IAC12X	DBCR1_IAC12MX	/* Range Exclusive */
+#define DBCR_IAC12MODE	DBCR1_IAC12MX	/* IAC 1-2 Mode Bits */
+#define DBCR_IAC34I	DBCR1_IAC34M	/* Range Inclusive */
+#define DBCR_IAC34X	DBCR1_IAC34MX	/* Range Exclusive */
+#define DBCR_IAC34MODE	DBCR1_IAC34MX	/* IAC 3-4 Mode Bits */
+
 /* Bit definitions related to the DBCR2. */
+#define DBCR2_DAC1US	0xC0000000	/* Data Addr Cmp 1 Sup/User   */
+#define DBCR2_DAC1ER	0x30000000	/* Data Addr Cmp 1 Eff/Real */
+#define DBCR2_DAC2US	0x00000000	/* Data Addr Cmp 2 Sup/User   */
+#define DBCR2_DAC2ER	0x00000000	/* Data Addr Cmp 2 Eff/Real */
 #define DBCR2_DAC12M	0x00800000	/* DAC 1-2 range enable */
+#define DBCR2_DAC12MM	0x00400000	/* DAC 1-2 Mask mode*/
 #define DBCR2_DAC12MX	0x00C00000	/* DAC 1-2 range eXclusive */
+#define DBCR2_DAC12MODE	0x00C00000	/* DAC 1-2 Mode Bits */
 #define DBCR2_DAC12A	0x00200000	/* DAC 1-2 Asynchronous */
-#endif
+#define DBCR2_DVC1M	0x000C0000	/* Data Value Comp 1 Mode */
+#define DBCR2_DVC1M_SHIFT	18	/* # of bits to shift DBCR2_DVC1M */
+#define DBCR2_DVC2M	0x00030000	/* Data Value Comp 2 Mode */
+#define DBCR2_DVC2M_SHIFT	16	/* # of bits to shift DBCR2_DVC2M */
+#define DBCR2_DVC1BE	0x00000F00	/* Data Value Comp 1 Byte */
+#define DBCR2_DVC1BE_SHIFT	8	/* # of bits to shift DBCR2_DVC1BE */
+#define DBCR2_DVC2BE	0x0000000F	/* Data Value Comp 2 Byte */
+#define DBCR2_DVC2BE_SHIFT	0	/* # of bits to shift DBCR2_DVC2BE */
+
+/*
+ * Are there any active Debug Events represented in the
+ * Debug Control Registers?
+ */
+#define DBCR0_ACTIVE_EVENTS  (DBCR0_ICMP | DBCR0_IAC1 | DBCR0_IAC2 | \
+			      DBCR0_IAC3 | DBCR0_IAC4 | DBCR0_DAC1R | \
+			      DBCR0_DAC1W  | DBCR0_DAC2R | DBCR0_DAC2W)
+#define DBCR1_ACTIVE_EVENTS	0
+
+#define DBCR_ACTIVE_EVENTS(dbcr0, dbcr1)  (((dbcr0) & DBCR0_ACTIVE_EVENTS) || \
+					   ((dbcr1) & DBCR1_ACTIVE_EVENTS))
+#endif /* #elif defined(CONFIG_BOOKE) */
 
 /* Bit definitions related to the TCR. */
 #define TCR_WP(x)	(((x)&0x3)<<30)	/* WDT Period */

arch/powerpc/include/asm/spinlock.h

@@ -27,6 +27,7 @@
 #endif
 #include <asm/asm-compat.h>
 #include <asm/synch.h>
+#include <asm/ppc-opcode.h>
 
 #define arch_spin_is_locked(x)		((x)->slock != 0)
 
@@ -60,13 +61,14 @@ static inline unsigned long __arch_spin_trylock(arch_spinlock_t *lock)
 
 	token = LOCK_TOKEN;
 	__asm__ __volatile__(
-"1:	lwarx		%0,0,%2\n\
+"1:	" PPC_LWARX(%0,0,%2,1) "\n\
 	cmpwi		0,%0,0\n\
 	bne-		2f\n\
 	stwcx.		%1,0,%2\n\
-	bne-		1b\n\
-	isync\n\
-2:"	: "=&r" (tmp)
+	bne-		1b\n"
+	PPC_ACQUIRE_BARRIER
+"2:"
+	: "=&r" (tmp)
 	: "r" (token), "r" (&lock->slock)
 	: "cr0", "memory");
 
@@ -144,7 +146,7 @@ static inline void arch_spin_unlock(arch_spinlock_t *lock)
 {
 	SYNC_IO;
 	__asm__ __volatile__("# arch_spin_unlock\n\t"
-				LWSYNC_ON_SMP: : :"memory");
+				PPC_RELEASE_BARRIER: : :"memory");
 	lock->slock = 0;
 }
 
@@ -186,15 +188,15 @@ static inline long __arch_read_trylock(arch_rwlock_t *rw)
 	long tmp;
 
 	__asm__ __volatile__(
-"1:	lwarx		%0,0,%1\n"
+"1:	" PPC_LWARX(%0,0,%1,1) "\n"
 	__DO_SIGN_EXTEND
 "	addic.		%0,%0,1\n\
 	ble-		2f\n"
 	PPC405_ERR77(0,%1)
 "	stwcx.		%0,0,%1\n\
-	bne-		1b\n\
-	isync\n\
-2:"	: "=&r" (tmp)
+	bne-		1b\n"
+	PPC_ACQUIRE_BARRIER
+"2:"	: "=&r" (tmp)
 	: "r" (&rw->lock)
 	: "cr0", "xer", "memory");
 
@@ -211,14 +213,14 @@ static inline long __arch_write_trylock(arch_rwlock_t *rw)
 
 	token = WRLOCK_TOKEN;
 	__asm__ __volatile__(
-"1:	lwarx		%0,0,%2\n\
+"1:	" PPC_LWARX(%0,0,%2,1) "\n\
 	cmpwi		0,%0,0\n\
 	bne-		2f\n"
 	PPC405_ERR77(0,%1)
 "	stwcx.		%1,0,%2\n\
-	bne-		1b\n\
-	isync\n\
-2:"	: "=&r" (tmp)
+	bne-		1b\n"
+	PPC_ACQUIRE_BARRIER
+"2:"	: "=&r" (tmp)
 	: "r" (token), "r" (&rw->lock)
 	: "cr0", "memory");
 
@@ -269,7 +271,7 @@ static inline void arch_read_unlock(arch_rwlock_t *rw)
 
 	__asm__ __volatile__(
 	"# read_unlock\n\t"
-	LWSYNC_ON_SMP
+	PPC_RELEASE_BARRIER
 "1:	lwarx		%0,0,%1\n\
 	addic		%0,%0,-1\n"
 	PPC405_ERR77(0,%1)
@@ -283,7 +285,7 @@ static inline void arch_read_unlock(arch_rwlock_t *rw)
 static inline void arch_write_unlock(arch_rwlock_t *rw)
 {
 	__asm__ __volatile__("# write_unlock\n\t"
-				LWSYNC_ON_SMP: : :"memory");
+				PPC_RELEASE_BARRIER: : :"memory");
 	rw->lock = 0;
 }
 

arch/powerpc/include/asm/synch.h

@@ -37,11 +37,15 @@ static inline void isync(void)
 #endif
 
 #ifdef CONFIG_SMP
-#define ISYNC_ON_SMP	"\n\tisync\n"
-#define LWSYNC_ON_SMP	stringify_in_c(LWSYNC) "\n"
+#define __PPC_ACQUIRE_BARRIER				\
+	START_LWSYNC_SECTION(97);			\
+	isync;						\
+	MAKE_LWSYNC_SECTION_ENTRY(97, __lwsync_fixup);
+#define PPC_ACQUIRE_BARRIER	"\n" stringify_in_c(__PPC_ACQUIRE_BARRIER)
+#define PPC_RELEASE_BARRIER	stringify_in_c(LWSYNC) "\n"
 #else
-#define ISYNC_ON_SMP
-#define LWSYNC_ON_SMP
+#define PPC_ACQUIRE_BARRIER
+#define PPC_RELEASE_BARRIER
 #endif
 
 #endif /* __KERNEL__ */

arch/powerpc/include/asm/system.h

@@ -112,8 +112,13 @@ static inline int debugger_fault_handler(struct pt_regs *regs) { return 0; }
 #endif
 
 extern int set_dabr(unsigned long dabr);
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
+extern void do_send_trap(struct pt_regs *regs, unsigned long address,
+			 unsigned long error_code, int signal_code, int brkpt);
+#else
 extern void do_dabr(struct pt_regs *regs, unsigned long address,
 		    unsigned long error_code);
+#endif
 extern void print_backtrace(unsigned long *);
 extern void show_regs(struct pt_regs * regs);
 extern void flush_instruction_cache(void);
@@ -232,12 +237,12 @@ __xchg_u32(volatile void *p, unsigned long val)
 	unsigned long prev;
 
 	__asm__ __volatile__(
-	LWSYNC_ON_SMP
+	PPC_RELEASE_BARRIER
 "1:	lwarx	%0,0,%2 \n"
 	PPC405_ERR77(0,%2)
 "	stwcx.	%3,0,%2 \n\
 	bne-	1b"
-	ISYNC_ON_SMP
+	PPC_ACQUIRE_BARRIER
 	: "=&r" (prev), "+m" (*(volatile unsigned int *)p)
 	: "r" (p), "r" (val)
 	: "cc", "memory");
@@ -275,12 +280,12 @@ __xchg_u64(volatile void *p, unsigned long val)
 	unsigned long prev;
 
 	__asm__ __volatile__(
-	LWSYNC_ON_SMP
+	PPC_RELEASE_BARRIER
 "1:	ldarx	%0,0,%2 \n"
 	PPC405_ERR77(0,%2)
 "	stdcx.	%3,0,%2 \n\
 	bne-	1b"
-	ISYNC_ON_SMP
+	PPC_ACQUIRE_BARRIER
 	: "=&r" (prev), "+m" (*(volatile unsigned long *)p)
 	: "r" (p), "r" (val)
 	: "cc", "memory");
@@ -366,14 +371,14 @@ __cmpxchg_u32(volatile unsigned int *p, unsigned long old, unsigned long new)
 	unsigned int prev;
 
 	__asm__ __volatile__ (
-	LWSYNC_ON_SMP
+	PPC_RELEASE_BARRIER
 "1:	lwarx	%0,0,%2		# __cmpxchg_u32\n\
 	cmpw	0,%0,%3\n\
 	bne-	2f\n"
 	PPC405_ERR77(0,%2)
 "	stwcx.	%4,0,%2\n\
 	bne-	1b"
-	ISYNC_ON_SMP
+	PPC_ACQUIRE_BARRIER
 	"\n\
 2:"
 	: "=&r" (prev), "+m" (*p)
@@ -412,13 +417,13 @@ __cmpxchg_u64(volatile unsigned long *p, unsigned long old, unsigned long new)
 	unsigned long prev;
 
 	__asm__ __volatile__ (
-	LWSYNC_ON_SMP
+	PPC_RELEASE_BARRIER
 "1:	ldarx	%0,0,%2		# __cmpxchg_u64\n\
 	cmpd	0,%0,%3\n\
 	bne-	2f\n\
 	stdcx.	%4,0,%2\n\
 	bne-	1b"
-	ISYNC_ON_SMP
+	PPC_ACQUIRE_BARRIER
 	"\n\
 2:"
 	: "=&r" (prev), "+m" (*p)

arch/powerpc/include/asm/topology.h

@@ -38,27 +38,33 @@ static inline int pcibus_to_node(struct pci_bus *bus)
 				 cpumask_of_node(pcibus_to_node(bus)))
 
 /* sched_domains SD_NODE_INIT for PPC64 machines */
-#define SD_NODE_INIT (struct sched_domain) {		\
-	.parent			= NULL,			\
-	.child			= NULL,			\
-	.groups			= NULL,			\
-	.min_interval		= 8,			\
-	.max_interval		= 32,			\
-	.busy_factor		= 32,			\
-	.imbalance_pct		= 125,			\
-	.cache_nice_tries	= 1,			\
-	.busy_idx		= 3,			\
-	.idle_idx		= 1,			\
-	.newidle_idx		= 0,			\
-	.wake_idx		= 0,			\
-	.flags			= SD_LOAD_BALANCE	\
-				| SD_BALANCE_EXEC	\
-				| SD_BALANCE_FORK	\
-				| SD_BALANCE_NEWIDLE	\
-				| SD_SERIALIZE,		\
-	.last_balance		= jiffies,		\
-	.balance_interval	= 1,			\
-	.nr_balance_failed	= 0,			\
+#define SD_NODE_INIT (struct sched_domain) {				\
+	.min_interval		= 8,					\
+	.max_interval		= 32,					\
+	.busy_factor		= 32,					\
+	.imbalance_pct		= 125,					\
+	.cache_nice_tries	= 1,					\
+	.busy_idx		= 3,					\
+	.idle_idx		= 1,					\
+	.newidle_idx		= 0,					\
+	.wake_idx		= 0,					\
+	.forkexec_idx		= 0,					\
+									\
+	.flags			= 1*SD_LOAD_BALANCE			\
+				| 1*SD_BALANCE_NEWIDLE			\
+				| 1*SD_BALANCE_EXEC			\
+				| 1*SD_BALANCE_FORK			\
+				| 0*SD_BALANCE_WAKE			\
+				| 0*SD_WAKE_AFFINE			\
+				| 0*SD_PREFER_LOCAL			\
+				| 0*SD_SHARE_CPUPOWER			\
+				| 0*SD_POWERSAVINGS_BALANCE		\
+				| 0*SD_SHARE_PKG_RESOURCES		\
+				| 1*SD_SERIALIZE			\
+				| 0*SD_PREFER_SIBLING			\
+				,					\
+	.last_balance		= jiffies,				\
+	.balance_interval	= 1,					\
 }
 
 extern void __init dump_numa_cpu_topology(void);

arch/powerpc/kernel/entry_64.S

@@ -791,9 +791,8 @@ _GLOBAL(enter_rtas)
 	
         li      r9,1
         rldicr  r9,r9,MSR_SF_LG,(63-MSR_SF_LG)
-	ori	r9,r9,MSR_IR|MSR_DR|MSR_FE0|MSR_FE1|MSR_FP
+	ori	r9,r9,MSR_IR|MSR_DR|MSR_FE0|MSR_FE1|MSR_FP|MSR_RI
 	andc	r6,r0,r9
-	ori	r6,r6,MSR_RI
 	sync				/* disable interrupts so SRR0/1 */
 	mtmsrd	r0			/* don't get trashed */
 

arch/powerpc/kernel/firmware.c

@@ -17,5 +17,5 @@
 
 #include <asm/firmware.h>
 
-unsigned long powerpc_firmware_features;
+unsigned long powerpc_firmware_features __read_mostly;
 EXPORT_SYMBOL_GPL(powerpc_firmware_features);

arch/powerpc/kernel/head_fsl_booke.S

@@ -214,11 +214,11 @@ skpinv:	addi	r6,r6,1				/* Increment */
 	bl	1f		/* Find our address */
 1:	mflr	r9
 	rlwimi	r7,r9,0,20,31
-	addi	r7,r7,24
+	addi	r7,r7,(2f - 1b)
 	mtspr	SPRN_SRR0,r7
 	mtspr	SPRN_SRR1,r6
 	rfi
-
+2:
 /* 4. Clear out PIDs & Search info */
 	li	r6,0
 	mtspr   SPRN_MAS6,r6

arch/powerpc/kernel/irq.c

@@ -73,8 +73,10 @@
 #define CREATE_TRACE_POINTS
 #include <asm/trace.h>
 
+DEFINE_PER_CPU_SHARED_ALIGNED(irq_cpustat_t, irq_stat);
+EXPORT_PER_CPU_SYMBOL(irq_stat);
+
 int __irq_offset_value;
-static int ppc_spurious_interrupts;
 
 #ifdef CONFIG_PPC32
 EXPORT_SYMBOL(__irq_offset_value);
@@ -180,30 +182,64 @@ notrace void raw_local_irq_restore(unsigned long en)
 EXPORT_SYMBOL(raw_local_irq_restore);
 #endif /* CONFIG_PPC64 */
 
+static int show_other_interrupts(struct seq_file *p, int prec)
+{
+	int j;
+
+#if defined(CONFIG_PPC32) && defined(CONFIG_TAU_INT)
+	if (tau_initialized) {
+		seq_printf(p, "%*s: ", prec, "TAU");
+		for_each_online_cpu(j)
+			seq_printf(p, "%10u ", tau_interrupts(j));
+		seq_puts(p, "  PowerPC             Thermal Assist (cpu temp)\n");
+	}
+#endif /* CONFIG_PPC32 && CONFIG_TAU_INT */
+
+	seq_printf(p, "%*s: ", prec, "LOC");
+	for_each_online_cpu(j)
+		seq_printf(p, "%10u ", per_cpu(irq_stat, j).timer_irqs);
+        seq_printf(p, "  Local timer interrupts\n");
+
+	seq_printf(p, "%*s: ", prec, "SPU");
+	for_each_online_cpu(j)
+		seq_printf(p, "%10u ", per_cpu(irq_stat, j).spurious_irqs);
+	seq_printf(p, "  Spurious interrupts\n");
+
+	seq_printf(p, "%*s: ", prec, "CNT");
+	for_each_online_cpu(j)
+		seq_printf(p, "%10u ", per_cpu(irq_stat, j).pmu_irqs);
+	seq_printf(p, "  Performance monitoring interrupts\n");
+
+	seq_printf(p, "%*s: ", prec, "MCE");
+	for_each_online_cpu(j)
+		seq_printf(p, "%10u ", per_cpu(irq_stat, j).mce_exceptions);
+	seq_printf(p, "  Machine check exceptions\n");
+
+	return 0;
+}
+
 int show_interrupts(struct seq_file *p, void *v)
 {
-	int i = *(loff_t *)v, j;
+	unsigned long flags, any_count = 0;
+	int i = *(loff_t *) v, j, prec;
 	struct irqaction *action;
 	struct irq_desc *desc;
-	unsigned long flags;
 
+	if (i > nr_irqs)
+		return 0;
+
+	for (prec = 3, j = 1000; prec < 10 && j <= nr_irqs; ++prec)
+		j *= 10;
+
+	if (i == nr_irqs)
+		return show_other_interrupts(p, prec);
+
+	/* print header */
 	if (i == 0) {
-		seq_puts(p, "           ");
+		seq_printf(p, "%*s", prec + 8, "");
 		for_each_online_cpu(j)
-			seq_printf(p, "CPU%d       ", j);
+			seq_printf(p, "CPU%-8d", j);
 		seq_putc(p, '\n');
-	} else if (i == nr_irqs) {
-#if defined(CONFIG_PPC32) && defined(CONFIG_TAU_INT)
-		if (tau_initialized){
-			seq_puts(p, "TAU: ");
-			for_each_online_cpu(j)
-				seq_printf(p, "%10u ", tau_interrupts(j));
-			seq_puts(p, "  PowerPC             Thermal Assist (cpu temp)\n");
-		}
-#endif /* CONFIG_PPC32 && CONFIG_TAU_INT*/
-		seq_printf(p, "BAD: %10u\n", ppc_spurious_interrupts);
-
-		return 0;
 	}
 
 	desc = irq_to_desc(i);
@@ -211,37 +247,48 @@ int show_interrupts(struct seq_file *p, void *v)
 		return 0;
 
 	raw_spin_lock_irqsave(&desc->lock, flags);
-
+	for_each_online_cpu(j)
+		any_count |= kstat_irqs_cpu(i, j);
 	action = desc->action;
-	if (!action || !action->handler)
-		goto skip;
+	if (!action && !any_count)
+		goto out;
 
-	seq_printf(p, "%3d: ", i);
-#ifdef CONFIG_SMP
+	seq_printf(p, "%*d: ", prec, i);
 	for_each_online_cpu(j)
 		seq_printf(p, "%10u ", kstat_irqs_cpu(i, j));
-#else
-	seq_printf(p, "%10u ", kstat_irqs(i));
-#endif /* CONFIG_SMP */
 
 	if (desc->chip)
-		seq_printf(p, " %s ", desc->chip->name);
+		seq_printf(p, "  %-16s", desc->chip->name);
 	else
-		seq_puts(p, "  None      ");
+		seq_printf(p, "  %-16s", "None");
+	seq_printf(p, " %-8s", (desc->status & IRQ_LEVEL) ? "Level" : "Edge");
 
-	seq_printf(p, "%s", (desc->status & IRQ_LEVEL) ? "Level " : "Edge  ");
-	seq_printf(p, "    %s", action->name);
+	if (action) {
+		seq_printf(p, "     %s", action->name);
+		while ((action = action->next) != NULL)
+			seq_printf(p, ", %s", action->name);
+	}
 
-	for (action = action->next; action; action = action->next)
-		seq_printf(p, ", %s", action->name);
 	seq_putc(p, '\n');
-
-skip:
+out:
 	raw_spin_unlock_irqrestore(&desc->lock, flags);
-
 	return 0;
 }
 
+/*
+ * /proc/stat helpers
+ */
+u64 arch_irq_stat_cpu(unsigned int cpu)
+{
+	u64 sum = per_cpu(irq_stat, cpu).timer_irqs;
+
+	sum += per_cpu(irq_stat, cpu).pmu_irqs;
+	sum += per_cpu(irq_stat, cpu).mce_exceptions;
+	sum += per_cpu(irq_stat, cpu).spurious_irqs;
+
+	return sum;
+}
+
 #ifdef CONFIG_HOTPLUG_CPU
 void fixup_irqs(cpumask_t map)
 {
@@ -353,8 +400,7 @@ void do_IRQ(struct pt_regs *regs)
 	if (irq != NO_IRQ && irq != NO_IRQ_IGNORE)
 		handle_one_irq(irq);
 	else if (irq != NO_IRQ_IGNORE)
-		/* That's not SMP safe ... but who cares ? */
-		ppc_spurious_interrupts++;
+		__get_cpu_var(irq_stat).spurious_irqs++;
 
 	irq_exit();
 	set_irq_regs(old_regs);
@@ -474,7 +520,7 @@ void do_softirq(void)
  */
 
 static LIST_HEAD(irq_hosts);
-static DEFINE_SPINLOCK(irq_big_lock);
+static DEFINE_RAW_SPINLOCK(irq_big_lock);
 static unsigned int revmap_trees_allocated;
 static DEFINE_MUTEX(revmap_trees_mutex);
 struct irq_map_entry irq_map[NR_IRQS];
@@ -520,14 +566,14 @@ struct irq_host *irq_alloc_host(struct device_node *of_node,
 	if (host->ops->match == NULL)
 		host->ops->match = default_irq_host_match;
 
-	spin_lock_irqsave(&irq_big_lock, flags);
+	raw_spin_lock_irqsave(&irq_big_lock, flags);
 
 	/* If it's a legacy controller, check for duplicates and
 	 * mark it as allocated (we use irq 0 host pointer for that
 	 */
 	if (revmap_type == IRQ_HOST_MAP_LEGACY) {
 		if (irq_map[0].host != NULL) {
-			spin_unlock_irqrestore(&irq_big_lock, flags);
+			raw_spin_unlock_irqrestore(&irq_big_lock, flags);
 			/* If we are early boot, we can't free the structure,
 			 * too bad...
 			 * this will be fixed once slab is made available early
@@ -541,7 +587,7 @@ struct irq_host *irq_alloc_host(struct device_node *of_node,
 	}
 
 	list_add(&host->link, &irq_hosts);
-	spin_unlock_irqrestore(&irq_big_lock, flags);
+	raw_spin_unlock_irqrestore(&irq_big_lock, flags);
 
 	/* Additional setups per revmap type */
 	switch(revmap_type) {
@@ -592,13 +638,13 @@ struct irq_host *irq_find_host(struct device_node *node)
 	 * the absence of a device node. This isn't a problem so far
 	 * yet though...
 	 */
-	spin_lock_irqsave(&irq_big_lock, flags);
+	raw_spin_lock_irqsave(&irq_big_lock, flags);
 	list_for_each_entry(h, &irq_hosts, link)
 		if (h->ops->match(h, node)) {
 			found = h;
 			break;
 		}
-	spin_unlock_irqrestore(&irq_big_lock, flags);
+	raw_spin_unlock_irqrestore(&irq_big_lock, flags);
 	return found;
 }
 EXPORT_SYMBOL_GPL(irq_find_host);
@@ -967,7 +1013,7 @@ unsigned int irq_alloc_virt(struct irq_host *host,
 	if (count == 0 || count > (irq_virq_count - NUM_ISA_INTERRUPTS))
 		return NO_IRQ;
 
-	spin_lock_irqsave(&irq_big_lock, flags);
+	raw_spin_lock_irqsave(&irq_big_lock, flags);
 
 	/* Use hint for 1 interrupt if any */
 	if (count == 1 && hint >= NUM_ISA_INTERRUPTS &&
@@ -991,7 +1037,7 @@ unsigned int irq_alloc_virt(struct irq_host *host,
 		}
 	}
 	if (found == NO_IRQ) {
-		spin_unlock_irqrestore(&irq_big_lock, flags);
+		raw_spin_unlock_irqrestore(&irq_big_lock, flags);
 		return NO_IRQ;
 	}
  hint_found:
@@ -1000,7 +1046,7 @@ unsigned int irq_alloc_virt(struct irq_host *host,
 		smp_wmb();
 		irq_map[i].host = host;
 	}
-	spin_unlock_irqrestore(&irq_big_lock, flags);
+	raw_spin_unlock_irqrestore(&irq_big_lock, flags);
 	return found;
 }
 
@@ -1012,7 +1058,7 @@ void irq_free_virt(unsigned int virq, unsigned int count)
 	WARN_ON (virq < NUM_ISA_INTERRUPTS);
 	WARN_ON (count == 0 || (virq + count) > irq_virq_count);
 
-	spin_lock_irqsave(&irq_big_lock, flags);
+	raw_spin_lock_irqsave(&irq_big_lock, flags);
 	for (i = virq; i < (virq + count); i++) {
 		struct irq_host *host;
 
@@ -1025,7 +1071,7 @@ void irq_free_virt(unsigned int virq, unsigned int count)
 		smp_wmb();
 		irq_map[i].host = NULL;
 	}
-	spin_unlock_irqrestore(&irq_big_lock, flags);
+	raw_spin_unlock_irqrestore(&irq_big_lock, flags);
 }
 
 int arch_early_irq_init(void)

arch/powerpc/kernel/kgdb.c

@@ -333,7 +333,7 @@ int kgdb_arch_handle_exception(int vector, int signo, int err_code,
 		atomic_set(&kgdb_cpu_doing_single_step, -1);
 		/* set the trace bit if we're stepping */
 		if (remcom_in_buffer[0] == 's') {
-#if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
 			mtspr(SPRN_DBCR0,
 			      mfspr(SPRN_DBCR0) | DBCR0_IC | DBCR0_IDM);
 			linux_regs->msr |= MSR_DE;

arch/powerpc/kernel/kprobes.c

@@ -36,7 +36,7 @@
 #include <asm/uaccess.h>
 #include <asm/system.h>
 
-#ifdef CONFIG_BOOKE
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
 #define MSR_SINGLESTEP	(MSR_DE)
 #else
 #define MSR_SINGLESTEP	(MSR_SE)
@@ -110,7 +110,7 @@ static void __kprobes prepare_singlestep(struct kprobe *p, struct pt_regs *regs)
 	 * like Decrementer or External Interrupt */
 	regs->msr &= ~MSR_EE;
 	regs->msr |= MSR_SINGLESTEP;
-#ifdef CONFIG_BOOKE
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
 	regs->msr &= ~MSR_CE;
 	mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) | DBCR0_IC | DBCR0_IDM);
 #endif

arch/powerpc/kernel/lparcfg.c

@@ -359,7 +359,7 @@ static void parse_system_parameter_string(struct seq_file *m)
 
 	unsigned char *local_buffer = kmalloc(SPLPAR_MAXLENGTH, GFP_KERNEL);
 	if (!local_buffer) {
-		printk(KERN_ERR "%s %s kmalloc failure at line %d \n",
+		printk(KERN_ERR "%s %s kmalloc failure at line %d\n",
 		       __FILE__, __func__, __LINE__);
 		return;
 	}
@@ -383,13 +383,13 @@ static void parse_system_parameter_string(struct seq_file *m)
 		int idx, w_idx;
 		char *workbuffer = kzalloc(SPLPAR_MAXLENGTH, GFP_KERNEL);
 		if (!workbuffer) {
-			printk(KERN_ERR "%s %s kmalloc failure at line %d \n",
+			printk(KERN_ERR "%s %s kmalloc failure at line %d\n",
 			       __FILE__, __func__, __LINE__);
 			kfree(local_buffer);
 			return;
 		}
 #ifdef LPARCFG_DEBUG
-		printk(KERN_INFO "success calling get-system-parameter \n");
+		printk(KERN_INFO "success calling get-system-parameter\n");
 #endif
 		splpar_strlen = local_buffer[0] * 256 + local_buffer[1];
 		local_buffer += 2;	/* step over strlen value */
@@ -440,7 +440,7 @@ static int lparcfg_count_active_processors(void)
 
 	while ((cpus_dn = of_find_node_by_type(cpus_dn, "cpu"))) {
 #ifdef LPARCFG_DEBUG
-		printk(KERN_ERR "cpus_dn %p \n", cpus_dn);
+		printk(KERN_ERR "cpus_dn %p\n", cpus_dn);
 #endif
 		count++;
 	}
@@ -725,7 +725,7 @@ static int lparcfg_data(struct seq_file *m, void *v)
 	const unsigned int *lp_index_ptr;
 	unsigned int lp_index = 0;
 
-	seq_printf(m, "%s %s \n", MODULE_NAME, MODULE_VERS);
+	seq_printf(m, "%s %s\n", MODULE_NAME, MODULE_VERS);
 
 	rootdn = of_find_node_by_path("/");
 	if (rootdn) {

arch/powerpc/kernel/nvram_64.c

@@ -338,8 +338,8 @@ static int __init nvram_create_os_partition(void)
 
 	rc = nvram_write_header(new_part);
 	if (rc <= 0) {
-		printk(KERN_ERR "nvram_create_os_partition: nvram_write_header \
-				failed (%d)\n", rc);
+		printk(KERN_ERR "nvram_create_os_partition: nvram_write_header "
+				"failed (%d)\n", rc);
 		return rc;
 	}
 
@@ -349,7 +349,7 @@ static int __init nvram_create_os_partition(void)
 	rc = ppc_md.nvram_write((char *)&seq_init, sizeof(seq_init), &tmp_index);
 	if (rc <= 0) {
 		printk(KERN_ERR "nvram_create_os_partition: nvram_write "
-				"failed (%d)\n", rc);
+		       "failed (%d)\n", rc);
 		return rc;
 	}
 	

arch/powerpc/kernel/pci_of_scan.c

@@ -304,7 +304,7 @@ static void __devinit __of_scan_bus(struct device_node *node,
 	int reglen, devfn;
 	struct pci_dev *dev;
 
-	pr_debug("of_scan_bus(%s) bus no %d... \n",
+	pr_debug("of_scan_bus(%s) bus no %d...\n",
 		 node->full_name, bus->number);
 
 	/* Scan direct children */

arch/powerpc/kernel/pmc.c

@@ -37,7 +37,7 @@ static void dummy_perf(struct pt_regs *regs)
 }
 
 
-static DEFINE_SPINLOCK(pmc_owner_lock);
+static DEFINE_RAW_SPINLOCK(pmc_owner_lock);
 static void *pmc_owner_caller; /* mostly for debugging */
 perf_irq_t perf_irq = dummy_perf;
 
@@ -45,7 +45,7 @@ int reserve_pmc_hardware(perf_irq_t new_perf_irq)
 {
 	int err = 0;
 
-	spin_lock(&pmc_owner_lock);
+	raw_spin_lock(&pmc_owner_lock);
 
 	if (pmc_owner_caller) {
 		printk(KERN_WARNING "reserve_pmc_hardware: "
@@ -59,21 +59,21 @@ int reserve_pmc_hardware(perf_irq_t new_perf_irq)
 	perf_irq = new_perf_irq ? new_perf_irq : dummy_perf;
 
  out:
-	spin_unlock(&pmc_owner_lock);
+	raw_spin_unlock(&pmc_owner_lock);
 	return err;
 }
 EXPORT_SYMBOL_GPL(reserve_pmc_hardware);
 
 void release_pmc_hardware(void)
 {
-	spin_lock(&pmc_owner_lock);
+	raw_spin_lock(&pmc_owner_lock);
 
 	WARN_ON(! pmc_owner_caller);
 
 	pmc_owner_caller = NULL;
 	perf_irq = dummy_perf;
 
-	spin_unlock(&pmc_owner_lock);
+	raw_spin_unlock(&pmc_owner_lock);
 }
 EXPORT_SYMBOL_GPL(release_pmc_hardware);
 

arch/powerpc/kernel/process.c

@@ -245,6 +245,24 @@ void discard_lazy_cpu_state(void)
 }
 #endif /* CONFIG_SMP */
 
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
+void do_send_trap(struct pt_regs *regs, unsigned long address,
+		  unsigned long error_code, int signal_code, int breakpt)
+{
+	siginfo_t info;
+
+	if (notify_die(DIE_DABR_MATCH, "dabr_match", regs, error_code,
+			11, SIGSEGV) == NOTIFY_STOP)
+		return;
+
+	/* Deliver the signal to userspace */
+	info.si_signo = SIGTRAP;
+	info.si_errno = breakpt;	/* breakpoint or watchpoint id */
+	info.si_code = signal_code;
+	info.si_addr = (void __user *)address;
+	force_sig_info(SIGTRAP, &info, current);
+}
+#else	/* !CONFIG_PPC_ADV_DEBUG_REGS */
 void do_dabr(struct pt_regs *regs, unsigned long address,
 		    unsigned long error_code)
 {
@@ -257,12 +275,6 @@ void do_dabr(struct pt_regs *regs, unsigned long address,
 	if (debugger_dabr_match(regs))
 		return;
 
-	/* Clear the DAC and struct entries.  One shot trigger */
-#if defined(CONFIG_BOOKE)
-	mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) & ~(DBSR_DAC1R | DBSR_DAC1W
-							| DBCR0_IDM));
-#endif
-
 	/* Clear the DABR */
 	set_dabr(0);
 
@@ -273,9 +285,82 @@ void do_dabr(struct pt_regs *regs, unsigned long address,
 	info.si_addr = (void __user *)address;
 	force_sig_info(SIGTRAP, &info, current);
 }
+#endif	/* CONFIG_PPC_ADV_DEBUG_REGS */
 
 static DEFINE_PER_CPU(unsigned long, current_dabr);
 
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
+/*
+ * Set the debug registers back to their default "safe" values.
+ */
+static void set_debug_reg_defaults(struct thread_struct *thread)
+{
+	thread->iac1 = thread->iac2 = 0;
+#if CONFIG_PPC_ADV_DEBUG_IACS > 2
+	thread->iac3 = thread->iac4 = 0;
+#endif
+	thread->dac1 = thread->dac2 = 0;
+#if CONFIG_PPC_ADV_DEBUG_DVCS > 0
+	thread->dvc1 = thread->dvc2 = 0;
+#endif
+	thread->dbcr0 = 0;
+#ifdef CONFIG_BOOKE
+	/*
+	 * Force User/Supervisor bits to b11 (user-only MSR[PR]=1)
+	 */
+	thread->dbcr1 = DBCR1_IAC1US | DBCR1_IAC2US |	\
+			DBCR1_IAC3US | DBCR1_IAC4US;
+	/*
+	 * Force Data Address Compare User/Supervisor bits to be User-only
+	 * (0b11 MSR[PR]=1) and set all other bits in DBCR2 register to be 0.
+	 */
+	thread->dbcr2 = DBCR2_DAC1US | DBCR2_DAC2US;
+#else
+	thread->dbcr1 = 0;
+#endif
+}
+
+static void prime_debug_regs(struct thread_struct *thread)
+{
+	mtspr(SPRN_IAC1, thread->iac1);
+	mtspr(SPRN_IAC2, thread->iac2);
+#if CONFIG_PPC_ADV_DEBUG_IACS > 2
+	mtspr(SPRN_IAC3, thread->iac3);
+	mtspr(SPRN_IAC4, thread->iac4);
+#endif
+	mtspr(SPRN_DAC1, thread->dac1);
+	mtspr(SPRN_DAC2, thread->dac2);
+#if CONFIG_PPC_ADV_DEBUG_DVCS > 0
+	mtspr(SPRN_DVC1, thread->dvc1);
+	mtspr(SPRN_DVC2, thread->dvc2);
+#endif
+	mtspr(SPRN_DBCR0, thread->dbcr0);
+	mtspr(SPRN_DBCR1, thread->dbcr1);
+#ifdef CONFIG_BOOKE
+	mtspr(SPRN_DBCR2, thread->dbcr2);
+#endif
+}
+/*
+ * Unless neither the old or new thread are making use of the
+ * debug registers, set the debug registers from the values
+ * stored in the new thread.
+ */
+static void switch_booke_debug_regs(struct thread_struct *new_thread)
+{
+	if ((current->thread.dbcr0 & DBCR0_IDM)
+		|| (new_thread->dbcr0 & DBCR0_IDM))
+			prime_debug_regs(new_thread);
+}
+#else	/* !CONFIG_PPC_ADV_DEBUG_REGS */
+static void set_debug_reg_defaults(struct thread_struct *thread)
+{
+	if (thread->dabr) {
+		thread->dabr = 0;
+		set_dabr(0);
+	}
+}
+#endif	/* CONFIG_PPC_ADV_DEBUG_REGS */
+
 int set_dabr(unsigned long dabr)
 {
 	__get_cpu_var(current_dabr) = dabr;
@@ -284,7 +369,7 @@ int set_dabr(unsigned long dabr)
 		return ppc_md.set_dabr(dabr);
 
 	/* XXX should we have a CPU_FTR_HAS_DABR ? */
-#if defined(CONFIG_BOOKE)
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
 	mtspr(SPRN_DAC1, dabr);
 #elif defined(CONFIG_PPC_BOOK3S)
 	mtspr(SPRN_DABR, dabr);
@@ -371,10 +456,8 @@ struct task_struct *__switch_to(struct task_struct *prev,
 
 #endif /* CONFIG_SMP */
 
-#if defined(CONFIG_BOOKE)
-	/* If new thread DAC (HW breakpoint) is the same then leave it */
-	if (new->thread.dabr)
-		set_dabr(new->thread.dabr);
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
+	switch_booke_debug_regs(&new->thread);
 #else
 	if (unlikely(__get_cpu_var(current_dabr) != new->thread.dabr))
 		set_dabr(new->thread.dabr);
@@ -514,7 +597,7 @@ void show_regs(struct pt_regs * regs)
 	printk("  CR: %08lx  XER: %08lx\n", regs->ccr, regs->xer);
 	trap = TRAP(regs);
 	if (trap == 0x300 || trap == 0x600)
-#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
 		printk("DEAR: "REG", ESR: "REG"\n", regs->dar, regs->dsisr);
 #else
 		printk("DAR: "REG", DSISR: "REG"\n", regs->dar, regs->dsisr);
@@ -556,14 +639,7 @@ void flush_thread(void)
 {
 	discard_lazy_cpu_state();
 
-	if (current->thread.dabr) {
-		current->thread.dabr = 0;
-		set_dabr(0);
-
-#if defined(CONFIG_BOOKE)
-		current->thread.dbcr0 &= ~(DBSR_DAC1R | DBSR_DAC1W);
-#endif
-	}
+	set_debug_reg_defaults(&current->thread);
 }
 
 void

arch/powerpc/kernel/prom_init.c

@@ -654,6 +654,9 @@ static void __init early_cmdline_parse(void)
 #define OV5_CMO			0x00
 #endif
 
+/* Option Vector 6: IBM PAPR hints */
+#define OV6_LINUX		0x02	/* Linux is our OS */
+
 /*
  * The architecture vector has an array of PVR mask/value pairs,
  * followed by # option vectors - 1, followed by the option vectors.
@@ -665,7 +668,7 @@ static unsigned char ibm_architecture_vec[] = {
 	W(0xffffffff), W(0x0f000003),	/* all 2.06-compliant */
 	W(0xffffffff), W(0x0f000002),	/* all 2.05-compliant */
 	W(0xfffffffe), W(0x0f000001),	/* all 2.04-compliant and earlier */
-	5 - 1,				/* 5 option vectors */
+	6 - 1,				/* 6 option vectors */
 
 	/* option vector 1: processor architectures supported */
 	3 - 2,				/* length */
@@ -697,12 +700,29 @@ static unsigned char ibm_architecture_vec[] = {
 	0,				/* don't halt */
 
 	/* option vector 5: PAPR/OF options */
-	5 - 2,				/* length */
+	13 - 2,				/* length */
 	0,				/* don't ignore, don't halt */
 	OV5_LPAR | OV5_SPLPAR | OV5_LARGE_PAGES | OV5_DRCONF_MEMORY |
 	OV5_DONATE_DEDICATE_CPU | OV5_MSI,
 	0,
 	OV5_CMO,
+	0,
+	0,
+	0,
+	0,
+	/* WARNING: The offset of the "number of cores" field below
+	 * must match by the macro below. Update the definition if
+	 * the structure layout changes.
+	 */
+#define IBM_ARCH_VEC_NRCORES_OFFSET	100
+	W(NR_CPUS),			/* number of cores supported */
+
+	/* option vector 6: IBM PAPR hints */
+	4 - 2,				/* length */
+	0,
+	0,
+	OV6_LINUX,
+
 };
 
 /* Old method - ELF header with PT_NOTE sections */
@@ -792,13 +812,70 @@ static struct fake_elf {
 	}
 };
 
+static int __init prom_count_smt_threads(void)
+{
+	phandle node;
+	char type[64];
+	unsigned int plen;
+
+	/* Pick up th first CPU node we can find */
+	for (node = 0; prom_next_node(&node); ) {
+		type[0] = 0;
+		prom_getprop(node, "device_type", type, sizeof(type));
+
+		if (strcmp(type, RELOC("cpu")))
+			continue;
+		/*
+		 * There is an entry for each smt thread, each entry being
+		 * 4 bytes long.  All cpus should have the same number of
+		 * smt threads, so return after finding the first.
+		 */
+		plen = prom_getproplen(node, "ibm,ppc-interrupt-server#s");
+		if (plen == PROM_ERROR)
+			break;
+		plen >>= 2;
+		prom_debug("Found 0x%x smt threads per core\n", (unsigned long)plen);
+
+		/* Sanity check */
+		if (plen < 1 || plen > 64) {
+			prom_printf("Threads per core 0x%x out of bounds, assuming 1\n",
+				    (unsigned long)plen);
+			return 1;
+		}
+		return plen;
+	}
+	prom_debug("No threads found, assuming 1 per core\n");
+
+	return 1;
+
+}
+
+
 static void __init prom_send_capabilities(void)
 {
 	ihandle elfloader, root;
 	prom_arg_t ret;
+	u32 *cores;
 
 	root = call_prom("open", 1, 1, ADDR("/"));
 	if (root != 0) {
+		/* We need to tell the FW about the number of cores we support.
+		 *
+		 * To do that, we count the number of threads on the first core
+		 * (we assume this is the same for all cores) and use it to
+		 * divide NR_CPUS.
+		 */
+		cores = (u32 *)PTRRELOC(&ibm_architecture_vec[IBM_ARCH_VEC_NRCORES_OFFSET]);
+		if (*cores != NR_CPUS) {
+			prom_printf("WARNING ! "
+				    "ibm_architecture_vec structure inconsistent: 0x%x !\n",
+				    *cores);
+		} else {
+			*cores = NR_CPUS / prom_count_smt_threads();
+			prom_printf("Max number of cores passed to firmware: 0x%x\n",
+				    (unsigned long)*cores);
+		}
+
 		/* try calling the ibm,client-architecture-support method */
 		prom_printf("Calling ibm,client-architecture-support...");
 		if (call_prom_ret("call-method", 3, 2, &ret,

arch/powerpc/kernel/ptrace.c

@@ -46,7 +46,7 @@
 /*
  * Set of msr bits that gdb can change on behalf of a process.
  */
-#if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
 #define MSR_DEBUGCHANGE	0
 #else
 #define MSR_DEBUGCHANGE	(MSR_SE | MSR_BE)
@@ -703,7 +703,7 @@ void user_enable_single_step(struct task_struct *task)
 	struct pt_regs *regs = task->thread.regs;
 
 	if (regs != NULL) {
-#if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
 		task->thread.dbcr0 &= ~DBCR0_BT;
 		task->thread.dbcr0 |= DBCR0_IDM | DBCR0_IC;
 		regs->msr |= MSR_DE;
@@ -720,7 +720,7 @@ void user_enable_block_step(struct task_struct *task)
 	struct pt_regs *regs = task->thread.regs;
 
 	if (regs != NULL) {
-#if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
 		task->thread.dbcr0 &= ~DBCR0_IC;
 		task->thread.dbcr0 = DBCR0_IDM | DBCR0_BT;
 		regs->msr |= MSR_DE;
@@ -737,17 +737,25 @@ void user_disable_single_step(struct task_struct *task)
 	struct pt_regs *regs = task->thread.regs;
 
 	if (regs != NULL) {
-#if defined(CONFIG_BOOKE)
-		/* If DAC don't clear DBCRO_IDM or MSR_DE */
-		if (task->thread.dabr)
-			task->thread.dbcr0 &= ~(DBCR0_IC | DBCR0_BT);
-		else {
-			task->thread.dbcr0 &= ~(DBCR0_IC | DBCR0_BT | DBCR0_IDM);
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
+		/*
+		 * The logic to disable single stepping should be as
+		 * simple as turning off the Instruction Complete flag.
+		 * And, after doing so, if all debug flags are off, turn
+		 * off DBCR0(IDM) and MSR(DE) .... Torez
+		 */
+		task->thread.dbcr0 &= ~DBCR0_IC;
+		/*
+		 * Test to see if any of the DBCR_ACTIVE_EVENTS bits are set.
+		 */
+		if (!DBCR_ACTIVE_EVENTS(task->thread.dbcr0,
+					task->thread.dbcr1)) {
+			/*
+			 * All debug events were off.....
+			 */
+			task->thread.dbcr0 &= ~DBCR0_IDM;
 			regs->msr &= ~MSR_DE;
 		}
-#elif defined(CONFIG_40x)
-		task->thread.dbcr0 &= ~(DBCR0_IC | DBCR0_BT | DBCR0_IDM);
-		regs->msr &= ~MSR_DE;
 #else
 		regs->msr &= ~(MSR_SE | MSR_BE);
 #endif
@@ -769,8 +777,7 @@ int ptrace_set_debugreg(struct task_struct *task, unsigned long addr,
 	if ((data & ~0x7UL) >= TASK_SIZE)
 		return -EIO;
 
-#ifndef CONFIG_BOOKE
-
+#ifndef CONFIG_PPC_ADV_DEBUG_REGS
 	/* For processors using DABR (i.e. 970), the bottom 3 bits are flags.
 	 *  It was assumed, on previous implementations, that 3 bits were
 	 *  passed together with the data address, fitting the design of the
@@ -789,21 +796,22 @@ int ptrace_set_debugreg(struct task_struct *task, unsigned long addr,
 
 	/* Move contents to the DABR register */
 	task->thread.dabr = data;
-
-#endif
-#if defined(CONFIG_BOOKE)
-
+#else /* CONFIG_PPC_ADV_DEBUG_REGS */
 	/* As described above, it was assumed 3 bits were passed with the data
 	 *  address, but we will assume only the mode bits will be passed
 	 *  as to not cause alignment restrictions for DAC-based processors.
 	 */
 
 	/* DAC's hold the whole address without any mode flags */
-	task->thread.dabr = data & ~0x3UL;
-
-	if (task->thread.dabr == 0) {
-		task->thread.dbcr0 &= ~(DBSR_DAC1R | DBSR_DAC1W | DBCR0_IDM);
-		task->thread.regs->msr &= ~MSR_DE;
+	task->thread.dac1 = data & ~0x3UL;
+
+	if (task->thread.dac1 == 0) {
+		dbcr_dac(task) &= ~(DBCR_DAC1R | DBCR_DAC1W);
+		if (!DBCR_ACTIVE_EVENTS(task->thread.dbcr0,
+					task->thread.dbcr1)) {
+			task->thread.regs->msr &= ~MSR_DE;
+			task->thread.dbcr0 &= ~DBCR0_IDM;
+		}
 		return 0;
 	}
 
@@ -814,17 +822,17 @@ int ptrace_set_debugreg(struct task_struct *task, unsigned long addr,
 
 	/* Set the Internal Debugging flag (IDM bit 1) for the DBCR0
 	   register */
-	task->thread.dbcr0 = DBCR0_IDM;
+	task->thread.dbcr0 |= DBCR0_IDM;
 
 	/* Check for write and read flags and set DBCR0
 	   accordingly */
+	dbcr_dac(task) &= ~(DBCR_DAC1R|DBCR_DAC1W);
 	if (data & 0x1UL)
-		task->thread.dbcr0 |= DBSR_DAC1R;
+		dbcr_dac(task) |= DBCR_DAC1R;
 	if (data & 0x2UL)
-		task->thread.dbcr0 |= DBSR_DAC1W;
-
+		dbcr_dac(task) |= DBCR_DAC1W;
 	task->thread.regs->msr |= MSR_DE;
-#endif
+#endif /* CONFIG_PPC_ADV_DEBUG_REGS */
 	return 0;
 }
 
@@ -839,6 +847,394 @@ void ptrace_disable(struct task_struct *child)
 	user_disable_single_step(child);
 }
 
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
+static long set_intruction_bp(struct task_struct *child,
+			      struct ppc_hw_breakpoint *bp_info)
+{
+	int slot;
+	int slot1_in_use = ((child->thread.dbcr0 & DBCR0_IAC1) != 0);
+	int slot2_in_use = ((child->thread.dbcr0 & DBCR0_IAC2) != 0);
+	int slot3_in_use = ((child->thread.dbcr0 & DBCR0_IAC3) != 0);
+	int slot4_in_use = ((child->thread.dbcr0 & DBCR0_IAC4) != 0);
+
+	if (dbcr_iac_range(child) & DBCR_IAC12MODE)
+		slot2_in_use = 1;
+	if (dbcr_iac_range(child) & DBCR_IAC34MODE)
+		slot4_in_use = 1;
+
+	if (bp_info->addr >= TASK_SIZE)
+		return -EIO;
+
+	if (bp_info->addr_mode != PPC_BREAKPOINT_MODE_EXACT) {
+
+		/* Make sure range is valid. */
+		if (bp_info->addr2 >= TASK_SIZE)
+			return -EIO;
+
+		/* We need a pair of IAC regsisters */
+		if ((!slot1_in_use) && (!slot2_in_use)) {
+			slot = 1;
+			child->thread.iac1 = bp_info->addr;
+			child->thread.iac2 = bp_info->addr2;
+			child->thread.dbcr0 |= DBCR0_IAC1;
+			if (bp_info->addr_mode ==
+					PPC_BREAKPOINT_MODE_RANGE_EXCLUSIVE)
+				dbcr_iac_range(child) |= DBCR_IAC12X;
+			else
+				dbcr_iac_range(child) |= DBCR_IAC12I;
+#if CONFIG_PPC_ADV_DEBUG_IACS > 2
+		} else if ((!slot3_in_use) && (!slot4_in_use)) {
+			slot = 3;
+			child->thread.iac3 = bp_info->addr;
+			child->thread.iac4 = bp_info->addr2;
+			child->thread.dbcr0 |= DBCR0_IAC3;
+			if (bp_info->addr_mode ==
+					PPC_BREAKPOINT_MODE_RANGE_EXCLUSIVE)
+				dbcr_iac_range(child) |= DBCR_IAC34X;
+			else
+				dbcr_iac_range(child) |= DBCR_IAC34I;
+#endif
+		} else
+			return -ENOSPC;
+	} else {
+		/* We only need one.  If possible leave a pair free in
+		 * case a range is needed later
+		 */
+		if (!slot1_in_use) {
+			/*
+			 * Don't use iac1 if iac1-iac2 are free and either
+			 * iac3 or iac4 (but not both) are free
+			 */
+			if (slot2_in_use || (slot3_in_use == slot4_in_use)) {
+				slot = 1;
+				child->thread.iac1 = bp_info->addr;
+				child->thread.dbcr0 |= DBCR0_IAC1;
+				goto out;
+			}
+		}
+		if (!slot2_in_use) {
+			slot = 2;
+			child->thread.iac2 = bp_info->addr;
+			child->thread.dbcr0 |= DBCR0_IAC2;
+#if CONFIG_PPC_ADV_DEBUG_IACS > 2
+		} else if (!slot3_in_use) {
+			slot = 3;
+			child->thread.iac3 = bp_info->addr;
+			child->thread.dbcr0 |= DBCR0_IAC3;
+		} else if (!slot4_in_use) {
+			slot = 4;
+			child->thread.iac4 = bp_info->addr;
+			child->thread.dbcr0 |= DBCR0_IAC4;
+#endif
+		} else
+			return -ENOSPC;
+	}
+out:
+	child->thread.dbcr0 |= DBCR0_IDM;
+	child->thread.regs->msr |= MSR_DE;
+
+	return slot;
+}
+
+static int del_instruction_bp(struct task_struct *child, int slot)
+{
+	switch (slot) {
+	case 1:
+		if (child->thread.iac1 == 0)
+			return -ENOENT;
+
+		if (dbcr_iac_range(child) & DBCR_IAC12MODE) {
+			/* address range - clear slots 1 & 2 */
+			child->thread.iac2 = 0;
+			dbcr_iac_range(child) &= ~DBCR_IAC12MODE;
+		}
+		child->thread.iac1 = 0;
+		child->thread.dbcr0 &= ~DBCR0_IAC1;
+		break;
+	case 2:
+		if (child->thread.iac2 == 0)
+			return -ENOENT;
+
+		if (dbcr_iac_range(child) & DBCR_IAC12MODE)
+			/* used in a range */
+			return -EINVAL;
+		child->thread.iac2 = 0;
+		child->thread.dbcr0 &= ~DBCR0_IAC2;
+		break;
+#if CONFIG_PPC_ADV_DEBUG_IACS > 2
+	case 3:
+		if (child->thread.iac3 == 0)
+			return -ENOENT;
+
+		if (dbcr_iac_range(child) & DBCR_IAC34MODE) {
+			/* address range - clear slots 3 & 4 */
+			child->thread.iac4 = 0;
+			dbcr_iac_range(child) &= ~DBCR_IAC34MODE;
+		}
+		child->thread.iac3 = 0;
+		child->thread.dbcr0 &= ~DBCR0_IAC3;
+		break;
+	case 4:
+		if (child->thread.iac4 == 0)
+			return -ENOENT;
+
+		if (dbcr_iac_range(child) & DBCR_IAC34MODE)
+			/* Used in a range */
+			return -EINVAL;
+		child->thread.iac4 = 0;
+		child->thread.dbcr0 &= ~DBCR0_IAC4;
+		break;
+#endif
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int set_dac(struct task_struct *child, struct ppc_hw_breakpoint *bp_info)
+{
+	int byte_enable =
+		(bp_info->condition_mode >> PPC_BREAKPOINT_CONDITION_BE_SHIFT)
+		& 0xf;
+	int condition_mode =
+		bp_info->condition_mode & PPC_BREAKPOINT_CONDITION_MODE;
+	int slot;
+
+	if (byte_enable && (condition_mode == 0))
+		return -EINVAL;
+
+	if (bp_info->addr >= TASK_SIZE)
+		return -EIO;
+
+	if ((dbcr_dac(child) & (DBCR_DAC1R | DBCR_DAC1W)) == 0) {
+		slot = 1;
+		if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_READ)
+			dbcr_dac(child) |= DBCR_DAC1R;
+		if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_WRITE)
+			dbcr_dac(child) |= DBCR_DAC1W;
+		child->thread.dac1 = (unsigned long)bp_info->addr;
+#if CONFIG_PPC_ADV_DEBUG_DVCS > 0
+		if (byte_enable) {
+			child->thread.dvc1 =
+				(unsigned long)bp_info->condition_value;
+			child->thread.dbcr2 |=
+				((byte_enable << DBCR2_DVC1BE_SHIFT) |
+				 (condition_mode << DBCR2_DVC1M_SHIFT));
+		}
+#endif
+#ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE
+	} else if (child->thread.dbcr2 & DBCR2_DAC12MODE) {
+		/* Both dac1 and dac2 are part of a range */
+		return -ENOSPC;
+#endif
+	} else if ((dbcr_dac(child) & (DBCR_DAC2R | DBCR_DAC2W)) == 0) {
+		slot = 2;
+		if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_READ)
+			dbcr_dac(child) |= DBCR_DAC2R;
+		if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_WRITE)
+			dbcr_dac(child) |= DBCR_DAC2W;
+		child->thread.dac2 = (unsigned long)bp_info->addr;
+#if CONFIG_PPC_ADV_DEBUG_DVCS > 0
+		if (byte_enable) {
+			child->thread.dvc2 =
+				(unsigned long)bp_info->condition_value;
+			child->thread.dbcr2 |=
+				((byte_enable << DBCR2_DVC2BE_SHIFT) |
+				 (condition_mode << DBCR2_DVC2M_SHIFT));
+		}
+#endif
+	} else
+		return -ENOSPC;
+	child->thread.dbcr0 |= DBCR0_IDM;
+	child->thread.regs->msr |= MSR_DE;
+
+	return slot + 4;
+}
+
+static int del_dac(struct task_struct *child, int slot)
+{
+	if (slot == 1) {
+		if (child->thread.dac1 == 0)
+			return -ENOENT;
+
+		child->thread.dac1 = 0;
+		dbcr_dac(child) &= ~(DBCR_DAC1R | DBCR_DAC1W);
+#ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE
+		if (child->thread.dbcr2 & DBCR2_DAC12MODE) {
+			child->thread.dac2 = 0;
+			child->thread.dbcr2 &= ~DBCR2_DAC12MODE;
+		}
+		child->thread.dbcr2 &= ~(DBCR2_DVC1M | DBCR2_DVC1BE);
+#endif
+#if CONFIG_PPC_ADV_DEBUG_DVCS > 0
+		child->thread.dvc1 = 0;
+#endif
+	} else if (slot == 2) {
+		if (child->thread.dac1 == 0)
+			return -ENOENT;
+
+#ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE
+		if (child->thread.dbcr2 & DBCR2_DAC12MODE)
+			/* Part of a range */
+			return -EINVAL;
+		child->thread.dbcr2 &= ~(DBCR2_DVC2M | DBCR2_DVC2BE);
+#endif
+#if CONFIG_PPC_ADV_DEBUG_DVCS > 0
+		child->thread.dvc2 = 0;
+#endif
+		child->thread.dac2 = 0;
+		dbcr_dac(child) &= ~(DBCR_DAC2R | DBCR_DAC2W);
+	} else
+		return -EINVAL;
+
+	return 0;
+}
+#endif /* CONFIG_PPC_ADV_DEBUG_REGS */
+
+#ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE
+static int set_dac_range(struct task_struct *child,
+			 struct ppc_hw_breakpoint *bp_info)
+{
+	int mode = bp_info->addr_mode & PPC_BREAKPOINT_MODE_MASK;
+
+	/* We don't allow range watchpoints to be used with DVC */
+	if (bp_info->condition_mode)
+		return -EINVAL;
+
+	/*
+	 * Best effort to verify the address range.  The user/supervisor bits
+	 * prevent trapping in kernel space, but let's fail on an obvious bad
+	 * range.  The simple test on the mask is not fool-proof, and any
+	 * exclusive range will spill over into kernel space.
+	 */
+	if (bp_info->addr >= TASK_SIZE)
+		return -EIO;
+	if (mode == PPC_BREAKPOINT_MODE_MASK) {
+		/*
+		 * dac2 is a bitmask.  Don't allow a mask that makes a
+		 * kernel space address from a valid dac1 value
+		 */
+		if (~((unsigned long)bp_info->addr2) >= TASK_SIZE)
+			return -EIO;
+	} else {
+		/*
+		 * For range breakpoints, addr2 must also be a valid address
+		 */
+		if (bp_info->addr2 >= TASK_SIZE)
+			return -EIO;
+	}
+
+	if (child->thread.dbcr0 &
+	    (DBCR0_DAC1R | DBCR0_DAC1W | DBCR0_DAC2R | DBCR0_DAC2W))
+		return -ENOSPC;
+
+	if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_READ)
+		child->thread.dbcr0 |= (DBCR0_DAC1R | DBCR0_IDM);
+	if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_WRITE)
+		child->thread.dbcr0 |= (DBCR0_DAC1W | DBCR0_IDM);
+	child->thread.dac1 = bp_info->addr;
+	child->thread.dac2 = bp_info->addr2;
+	if (mode == PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE)
+		child->thread.dbcr2  |= DBCR2_DAC12M;
+	else if (mode == PPC_BREAKPOINT_MODE_RANGE_EXCLUSIVE)
+		child->thread.dbcr2  |= DBCR2_DAC12MX;
+	else	/* PPC_BREAKPOINT_MODE_MASK */
+		child->thread.dbcr2  |= DBCR2_DAC12MM;
+	child->thread.regs->msr |= MSR_DE;
+
+	return 5;
+}
+#endif /* CONFIG_PPC_ADV_DEBUG_DAC_RANGE */
+
+static long ppc_set_hwdebug(struct task_struct *child,
+		     struct ppc_hw_breakpoint *bp_info)
+{
+	if (bp_info->version != 1)
+		return -ENOTSUPP;
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
+	/*
+	 * Check for invalid flags and combinations
+	 */
+	if ((bp_info->trigger_type == 0) ||
+	    (bp_info->trigger_type & ~(PPC_BREAKPOINT_TRIGGER_EXECUTE |
+				       PPC_BREAKPOINT_TRIGGER_RW)) ||
+	    (bp_info->addr_mode & ~PPC_BREAKPOINT_MODE_MASK) ||
+	    (bp_info->condition_mode &
+	     ~(PPC_BREAKPOINT_CONDITION_MODE |
+	       PPC_BREAKPOINT_CONDITION_BE_ALL)))
+		return -EINVAL;
+#if CONFIG_PPC_ADV_DEBUG_DVCS == 0
+	if (bp_info->condition_mode != PPC_BREAKPOINT_CONDITION_NONE)
+		return -EINVAL;
+#endif
+
+	if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_EXECUTE) {
+		if ((bp_info->trigger_type != PPC_BREAKPOINT_TRIGGER_EXECUTE) ||
+		    (bp_info->condition_mode != PPC_BREAKPOINT_CONDITION_NONE))
+			return -EINVAL;
+		return set_intruction_bp(child, bp_info);
+	}
+	if (bp_info->addr_mode == PPC_BREAKPOINT_MODE_EXACT)
+		return set_dac(child, bp_info);
+
+#ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE
+	return set_dac_range(child, bp_info);
+#else
+	return -EINVAL;
+#endif
+#else /* !CONFIG_PPC_ADV_DEBUG_DVCS */
+	/*
+	 * We only support one data breakpoint
+	 */
+	if (((bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_RW) == 0) ||
+	    ((bp_info->trigger_type & ~PPC_BREAKPOINT_TRIGGER_RW) != 0) ||
+	    (bp_info->trigger_type != PPC_BREAKPOINT_TRIGGER_WRITE) ||
+	    (bp_info->addr_mode != PPC_BREAKPOINT_MODE_EXACT) ||
+	    (bp_info->condition_mode != PPC_BREAKPOINT_CONDITION_NONE))
+		return -EINVAL;
+
+	if (child->thread.dabr)
+		return -ENOSPC;
+
+	if ((unsigned long)bp_info->addr >= TASK_SIZE)
+		return -EIO;
+
+	child->thread.dabr = (unsigned long)bp_info->addr;
+
+	return 1;
+#endif /* !CONFIG_PPC_ADV_DEBUG_DVCS */
+}
+
+static long ppc_del_hwdebug(struct task_struct *child, long addr, long data)
+{
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
+	int rc;
+
+	if (data <= 4)
+		rc = del_instruction_bp(child, (int)data);
+	else
+		rc = del_dac(child, (int)data - 4);
+
+	if (!rc) {
+		if (!DBCR_ACTIVE_EVENTS(child->thread.dbcr0,
+					child->thread.dbcr1)) {
+			child->thread.dbcr0 &= ~DBCR0_IDM;
+			child->thread.regs->msr &= ~MSR_DE;
+		}
+	}
+	return rc;
+#else
+	if (data != 1)
+		return -EINVAL;
+	if (child->thread.dabr == 0)
+		return -ENOENT;
+
+	child->thread.dabr = 0;
+
+	return 0;
+#endif
+}
+
 /*
  * Here are the old "legacy" powerpc specific getregs/setregs ptrace calls,
  * we mark them as obsolete now, they will be removed in a future version
@@ -932,13 +1328,77 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		break;
 	}
 
+	case PPC_PTRACE_GETHWDBGINFO: {
+		struct ppc_debug_info dbginfo;
+
+		dbginfo.version = 1;
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
+		dbginfo.num_instruction_bps = CONFIG_PPC_ADV_DEBUG_IACS;
+		dbginfo.num_data_bps = CONFIG_PPC_ADV_DEBUG_DACS;
+		dbginfo.num_condition_regs = CONFIG_PPC_ADV_DEBUG_DVCS;
+		dbginfo.data_bp_alignment = 4;
+		dbginfo.sizeof_condition = 4;
+		dbginfo.features = PPC_DEBUG_FEATURE_INSN_BP_RANGE |
+				   PPC_DEBUG_FEATURE_INSN_BP_MASK;
+#ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE
+		dbginfo.features |=
+				   PPC_DEBUG_FEATURE_DATA_BP_RANGE |
+				   PPC_DEBUG_FEATURE_DATA_BP_MASK;
+#endif
+#else /* !CONFIG_PPC_ADV_DEBUG_REGS */
+		dbginfo.num_instruction_bps = 0;
+		dbginfo.num_data_bps = 1;
+		dbginfo.num_condition_regs = 0;
+#ifdef CONFIG_PPC64
+		dbginfo.data_bp_alignment = 8;
+#else
+		dbginfo.data_bp_alignment = 4;
+#endif
+		dbginfo.sizeof_condition = 0;
+		dbginfo.features = 0;
+#endif /* CONFIG_PPC_ADV_DEBUG_REGS */
+
+		if (!access_ok(VERIFY_WRITE, data,
+			       sizeof(struct ppc_debug_info)))
+			return -EFAULT;
+		ret = __copy_to_user((struct ppc_debug_info __user *)data,
+				     &dbginfo, sizeof(struct ppc_debug_info)) ?
+		      -EFAULT : 0;
+		break;
+	}
+
+	case PPC_PTRACE_SETHWDEBUG: {
+		struct ppc_hw_breakpoint bp_info;
+
+		if (!access_ok(VERIFY_READ, data,
+			       sizeof(struct ppc_hw_breakpoint)))
+			return -EFAULT;
+		ret = __copy_from_user(&bp_info,
+				       (struct ppc_hw_breakpoint __user *)data,
+				       sizeof(struct ppc_hw_breakpoint)) ?
+		      -EFAULT : 0;
+		if (!ret)
+			ret = ppc_set_hwdebug(child, &bp_info);
+		break;
+	}
+
+	case PPC_PTRACE_DELHWDEBUG: {
+		ret = ppc_del_hwdebug(child, addr, data);
+		break;
+	}
+
 	case PTRACE_GET_DEBUGREG: {
 		ret = -EINVAL;
 		/* We only support one DABR and no IABRS at the moment */
 		if (addr > 0)
 			break;
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
+		ret = put_user(child->thread.dac1,
+			       (unsigned long __user *)data);
+#else
 		ret = put_user(child->thread.dabr,
 			       (unsigned long __user *)data);
+#endif
 		break;
 	}
 

arch/powerpc/kernel/signal.c

@@ -140,17 +140,15 @@ static int do_signal_pending(sigset_t *oldset, struct pt_regs *regs)
 		return 0;               /* no signals delivered */
 	}
 
+#ifndef CONFIG_PPC_ADV_DEBUG_REGS
         /*
 	 * Reenable the DABR before delivering the signal to
 	 * user space. The DABR will have been cleared if it
 	 * triggered inside the kernel.
 	 */
-	if (current->thread.dabr) {
+	if (current->thread.dabr)
 		set_dabr(current->thread.dabr);
-#if defined(CONFIG_BOOKE)
-		mtspr(SPRN_DBCR0, current->thread.dbcr0);
 #endif
-	}
 
 	if (is32) {
         	if (ka.sa.sa_flags & SA_SIGINFO)

arch/powerpc/kernel/signal_32.c

@@ -1078,7 +1078,7 @@ int sys_debug_setcontext(struct ucontext __user *ctx,
 	int i;
 	unsigned char tmp;
 	unsigned long new_msr = regs->msr;
-#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
 	unsigned long new_dbcr0 = current->thread.dbcr0;
 #endif
 
@@ -1087,13 +1087,17 @@ int sys_debug_setcontext(struct ucontext __user *ctx,
 			return -EFAULT;
 		switch (op.dbg_type) {
 		case SIG_DBG_SINGLE_STEPPING:
-#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
 			if (op.dbg_value) {
 				new_msr |= MSR_DE;
 				new_dbcr0 |= (DBCR0_IDM | DBCR0_IC);
 			} else {
-				new_msr &= ~MSR_DE;
-				new_dbcr0 &= ~(DBCR0_IDM | DBCR0_IC);
+				new_dbcr0 &= ~DBCR0_IC;
+				if (!DBCR_ACTIVE_EVENTS(new_dbcr0,
+						current->thread.dbcr1)) {
+					new_msr &= ~MSR_DE;
+					new_dbcr0 &= ~DBCR0_IDM;
+				}
 			}
 #else
 			if (op.dbg_value)
@@ -1103,7 +1107,7 @@ int sys_debug_setcontext(struct ucontext __user *ctx,
 #endif
 			break;
 		case SIG_DBG_BRANCH_TRACING:
-#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
 			return -EINVAL;
 #else
 			if (op.dbg_value)
@@ -1124,7 +1128,7 @@ int sys_debug_setcontext(struct ucontext __user *ctx,
 	   failure is a problem, anyway, and it's very unlikely unless
 	   the user is really doing something wrong. */
 	regs->msr = new_msr;
-#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
 	current->thread.dbcr0 = new_dbcr0;
 #endif
 

arch/powerpc/kernel/time.c

@@ -265,8 +265,8 @@ void account_system_vtime(struct task_struct *tsk)
 		account_system_time(tsk, 0, delta, deltascaled);
 	else
 		account_idle_time(delta);
-	per_cpu(cputime_last_delta, smp_processor_id()) = delta;
-	per_cpu(cputime_scaled_last_delta, smp_processor_id()) = deltascaled;
+	__get_cpu_var(cputime_last_delta) = delta;
+	__get_cpu_var(cputime_scaled_last_delta) = deltascaled;
 	local_irq_restore(flags);
 }
 EXPORT_SYMBOL_GPL(account_system_vtime);
@@ -575,6 +575,8 @@ void timer_interrupt(struct pt_regs * regs)
 
 	trace_timer_interrupt_entry(regs);
 
+	__get_cpu_var(irq_stat).timer_irqs++;
+
 	/* Ensure a positive value is written to the decrementer, or else
 	 * some CPUs will continuue to take decrementer exceptions */
 	set_dec(DECREMENTER_MAX);
@@ -935,8 +937,8 @@ static void register_decrementer_clockevent(int cpu)
 	*dec = decrementer_clockevent;
 	dec->cpumask = cpumask_of(cpu);
 
-	printk(KERN_DEBUG "clockevent: %s mult[%x] shift[%d] cpu[%d]\n",
-	       dec->name, dec->mult, dec->shift, cpu);
+	printk_once(KERN_DEBUG "clockevent: %s mult[%x] shift[%d] cpu[%d]\n",
+		    dec->name, dec->mult, dec->shift, cpu);
 
 	clockevents_register_device(dec);
 }

arch/powerpc/kernel/traps.c

@@ -60,13 +60,13 @@
 #endif
 
 #if defined(CONFIG_DEBUGGER) || defined(CONFIG_KEXEC)
-int (*__debugger)(struct pt_regs *regs);
-int (*__debugger_ipi)(struct pt_regs *regs);
-int (*__debugger_bpt)(struct pt_regs *regs);
-int (*__debugger_sstep)(struct pt_regs *regs);
-int (*__debugger_iabr_match)(struct pt_regs *regs);
-int (*__debugger_dabr_match)(struct pt_regs *regs);
-int (*__debugger_fault_handler)(struct pt_regs *regs);
+int (*__debugger)(struct pt_regs *regs) __read_mostly;
+int (*__debugger_ipi)(struct pt_regs *regs) __read_mostly;
+int (*__debugger_bpt)(struct pt_regs *regs) __read_mostly;
+int (*__debugger_sstep)(struct pt_regs *regs) __read_mostly;
+int (*__debugger_iabr_match)(struct pt_regs *regs) __read_mostly;
+int (*__debugger_dabr_match)(struct pt_regs *regs) __read_mostly;
+int (*__debugger_fault_handler)(struct pt_regs *regs) __read_mostly;
 
 EXPORT_SYMBOL(__debugger);
 EXPORT_SYMBOL(__debugger_ipi);
@@ -102,11 +102,11 @@ static inline void pmac_backlight_unblank(void) { }
 int die(const char *str, struct pt_regs *regs, long err)
 {
 	static struct {
-		spinlock_t lock;
+		raw_spinlock_t lock;
 		u32 lock_owner;
 		int lock_owner_depth;
 	} die = {
-		.lock =			__SPIN_LOCK_UNLOCKED(die.lock),
+		.lock =			__RAW_SPIN_LOCK_UNLOCKED(die.lock),
 		.lock_owner =		-1,
 		.lock_owner_depth =	0
 	};
@@ -120,7 +120,7 @@ int die(const char *str, struct pt_regs *regs, long err)
 
 	if (die.lock_owner != raw_smp_processor_id()) {
 		console_verbose();
-		spin_lock_irqsave(&die.lock, flags);
+		raw_spin_lock_irqsave(&die.lock, flags);
 		die.lock_owner = smp_processor_id();
 		die.lock_owner_depth = 0;
 		bust_spinlocks(1);
@@ -146,6 +146,11 @@ int die(const char *str, struct pt_regs *regs, long err)
 #endif
 		printk("%s\n", ppc_md.name ? ppc_md.name : "");
 
+		sysfs_printk_last_file();
+		if (notify_die(DIE_OOPS, str, regs, err, 255,
+			       SIGSEGV) == NOTIFY_STOP)
+			return 1;
+
 		print_modules();
 		show_regs(regs);
 	} else {
@@ -155,7 +160,7 @@ int die(const char *str, struct pt_regs *regs, long err)
 	bust_spinlocks(0);
 	die.lock_owner = -1;
 	add_taint(TAINT_DIE);
-	spin_unlock_irqrestore(&die.lock, flags);
+	raw_spin_unlock_irqrestore(&die.lock, flags);
 
 	if (kexec_should_crash(current) ||
 		kexec_sr_activated(smp_processor_id()))
@@ -294,7 +299,7 @@ static inline int check_io_access(struct pt_regs *regs)
 	return 0;
 }
 
-#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
 /* On 4xx, the reason for the machine check or program exception
    is in the ESR. */
 #define get_reason(regs)	((regs)->dsisr)
@@ -478,6 +483,8 @@ void machine_check_exception(struct pt_regs *regs)
 {
 	int recover = 0;
 
+	__get_cpu_var(irq_stat).mce_exceptions++;
+
 	/* See if any machine dependent calls. In theory, we would want
 	 * to call the CPU first, and call the ppc_md. one if the CPU
 	 * one returns a positive number. However there is existing code
@@ -960,6 +967,8 @@ void vsx_unavailable_exception(struct pt_regs *regs)
 
 void performance_monitor_exception(struct pt_regs *regs)
 {
+	__get_cpu_var(irq_stat).pmu_irqs++;
+
 	perf_irq(regs);
 }
 
@@ -1024,10 +1033,69 @@ void SoftwareEmulation(struct pt_regs *regs)
 }
 #endif /* CONFIG_8xx */
 
-#if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
+static void handle_debug(struct pt_regs *regs, unsigned long debug_status)
+{
+	int changed = 0;
+	/*
+	 * Determine the cause of the debug event, clear the
+	 * event flags and send a trap to the handler. Torez
+	 */
+	if (debug_status & (DBSR_DAC1R | DBSR_DAC1W)) {
+		dbcr_dac(current) &= ~(DBCR_DAC1R | DBCR_DAC1W);
+#ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE
+		current->thread.dbcr2 &= ~DBCR2_DAC12MODE;
+#endif
+		do_send_trap(regs, mfspr(SPRN_DAC1), debug_status, TRAP_HWBKPT,
+			     5);
+		changed |= 0x01;
+	}  else if (debug_status & (DBSR_DAC2R | DBSR_DAC2W)) {
+		dbcr_dac(current) &= ~(DBCR_DAC2R | DBCR_DAC2W);
+		do_send_trap(regs, mfspr(SPRN_DAC2), debug_status, TRAP_HWBKPT,
+			     6);
+		changed |= 0x01;
+	}  else if (debug_status & DBSR_IAC1) {
+		current->thread.dbcr0 &= ~DBCR0_IAC1;
+		dbcr_iac_range(current) &= ~DBCR_IAC12MODE;
+		do_send_trap(regs, mfspr(SPRN_IAC1), debug_status, TRAP_HWBKPT,
+			     1);
+		changed |= 0x01;
+	}  else if (debug_status & DBSR_IAC2) {
+		current->thread.dbcr0 &= ~DBCR0_IAC2;
+		do_send_trap(regs, mfspr(SPRN_IAC2), debug_status, TRAP_HWBKPT,
+			     2);
+		changed |= 0x01;
+	}  else if (debug_status & DBSR_IAC3) {
+		current->thread.dbcr0 &= ~DBCR0_IAC3;
+		dbcr_iac_range(current) &= ~DBCR_IAC34MODE;
+		do_send_trap(regs, mfspr(SPRN_IAC3), debug_status, TRAP_HWBKPT,
+			     3);
+		changed |= 0x01;
+	}  else if (debug_status & DBSR_IAC4) {
+		current->thread.dbcr0 &= ~DBCR0_IAC4;
+		do_send_trap(regs, mfspr(SPRN_IAC4), debug_status, TRAP_HWBKPT,
+			     4);
+		changed |= 0x01;
+	}
+	/*
+	 * At the point this routine was called, the MSR(DE) was turned off.
+	 * Check all other debug flags and see if that bit needs to be turned
+	 * back on or not.
+	 */
+	if (DBCR_ACTIVE_EVENTS(current->thread.dbcr0, current->thread.dbcr1))
+		regs->msr |= MSR_DE;
+	else
+		/* Make sure the IDM flag is off */
+		current->thread.dbcr0 &= ~DBCR0_IDM;
+
+	if (changed & 0x01)
+		mtspr(SPRN_DBCR0, current->thread.dbcr0);
+}
 
 void __kprobes DebugException(struct pt_regs *regs, unsigned long debug_status)
 {
+	current->thread.dbsr = debug_status;
+
 	/* Hack alert: On BookE, Branch Taken stops on the branch itself, while
 	 * on server, it stops on the target of the branch. In order to simulate
 	 * the server behaviour, we thus restart right away with a single step
@@ -1071,29 +1139,23 @@ void __kprobes DebugException(struct pt_regs *regs, unsigned long debug_status)
 		if (debugger_sstep(regs))
 			return;
 
-		if (user_mode(regs))
-			current->thread.dbcr0 &= ~(DBCR0_IC);
-
-		_exception(SIGTRAP, regs, TRAP_TRACE, regs->nip);
-	} else if (debug_status & (DBSR_DAC1R | DBSR_DAC1W)) {
-		regs->msr &= ~MSR_DE;
-
 		if (user_mode(regs)) {
-			current->thread.dbcr0 &= ~(DBSR_DAC1R | DBSR_DAC1W |
-								DBCR0_IDM);
-		} else {
-			/* Disable DAC interupts */
-			mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) & ~(DBSR_DAC1R |
-						DBSR_DAC1W | DBCR0_IDM));
-
-			/* Clear the DAC event */
-			mtspr(SPRN_DBSR, (DBSR_DAC1R | DBSR_DAC1W));
+			current->thread.dbcr0 &= ~DBCR0_IC;
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
+			if (DBCR_ACTIVE_EVENTS(current->thread.dbcr0,
+					       current->thread.dbcr1))
+				regs->msr |= MSR_DE;
+			else
+				/* Make sure the IDM bit is off */
+				current->thread.dbcr0 &= ~DBCR0_IDM;
+#endif
 		}
-		/* Setup and send the trap to the handler */
-		do_dabr(regs, mfspr(SPRN_DAC1), debug_status);
-	}
+
+		_exception(SIGTRAP, regs, TRAP_TRACE, regs->nip);
+	} else
+		handle_debug(regs, debug_status);
 }
-#endif /* CONFIG_4xx || CONFIG_BOOKE */
+#endif /* CONFIG_PPC_ADV_DEBUG_REGS */
 
 #if !defined(CONFIG_TAU_INT)
 void TAUException(struct pt_regs *regs)

arch/powerpc/lib/copypage_64.S

@@ -43,62 +43,62 @@ END_FTR_SECTION_IFSET(CPU_FTR_CP_USE_DCBTZ)
 	ld	r7,16(r4)
 	ldu	r8,24(r4)
 1:	std	r5,8(r3)
-	ld	r9,8(r4)
 	std	r6,16(r3)
+	ld	r9,8(r4)
 	ld	r10,16(r4)
 	std	r7,24(r3)
-	ld	r11,24(r4)
 	std	r8,32(r3)
+	ld	r11,24(r4)
 	ld	r12,32(r4)
 	std	r9,40(r3)
-	ld	r5,40(r4)
 	std	r10,48(r3)
+	ld	r5,40(r4)
 	ld	r6,48(r4)
 	std	r11,56(r3)
-	ld	r7,56(r4)
 	std	r12,64(r3)
+	ld	r7,56(r4)
 	ld	r8,64(r4)
 	std	r5,72(r3)
-	ld	r9,72(r4)
 	std	r6,80(r3)
+	ld	r9,72(r4)
 	ld	r10,80(r4)
 	std	r7,88(r3)
-	ld	r11,88(r4)
 	std	r8,96(r3)
+	ld	r11,88(r4)
 	ld	r12,96(r4)
 	std	r9,104(r3)
-	ld	r5,104(r4)
 	std	r10,112(r3)
+	ld	r5,104(r4)
 	ld	r6,112(r4)
 	std	r11,120(r3)
-	ld	r7,120(r4)
 	stdu	r12,128(r3)
+	ld	r7,120(r4)
 	ldu	r8,128(r4)
 	bdnz	1b
 
 	std	r5,8(r3)
-	ld	r9,8(r4)
 	std	r6,16(r3)
+	ld	r9,8(r4)
 	ld	r10,16(r4)
 	std	r7,24(r3)
-	ld	r11,24(r4)
 	std	r8,32(r3)
+	ld	r11,24(r4)
 	ld	r12,32(r4)
 	std	r9,40(r3)
-	ld	r5,40(r4)
 	std	r10,48(r3)
+	ld	r5,40(r4)
 	ld	r6,48(r4)
 	std	r11,56(r3)
-	ld	r7,56(r4)
 	std	r12,64(r3)
+	ld	r7,56(r4)
 	ld	r8,64(r4)
 	std	r5,72(r3)
-	ld	r9,72(r4)
 	std	r6,80(r3)
+	ld	r9,72(r4)
 	ld	r10,80(r4)
 	std	r7,88(r3)
-	ld	r11,88(r4)
 	std	r8,96(r3)
+	ld	r11,88(r4)
 	ld	r12,96(r4)
 	std	r9,104(r3)
 	std	r10,112(r3)

arch/powerpc/lib/copyuser_64.S

@@ -44,37 +44,55 @@ BEGIN_FTR_SECTION
 	andi.	r0,r4,7
 	bne	.Lsrc_unaligned
 END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD)
-	srdi	r7,r5,4
-20:	ld	r9,0(r4)
-	addi	r4,r4,-8
-	mtctr	r7
-	andi.	r5,r5,7
-	bf	cr7*4+0,22f
-	addi	r3,r3,8
-	addi	r4,r4,8
-	mr	r8,r9
-	blt	cr1,72f
-21:	ld	r9,8(r4)
-70:	std	r8,8(r3)
-22:	ldu	r8,16(r4)
-71:	stdu	r9,16(r3)
+	blt	cr1,.Ldo_tail		/* if < 16 bytes to copy */
+	srdi	r0,r5,5
+	cmpdi	cr1,r0,0
+20:	ld	r7,0(r4)
+220:	ld	r6,8(r4)
+	addi	r4,r4,16
+	mtctr	r0
+	andi.	r0,r5,0x10
+	beq	22f
+	addi	r3,r3,16
+	addi	r4,r4,-16
+	mr	r9,r7
+	mr	r8,r6
+	beq	cr1,72f
+21:	ld	r7,16(r4)
+221:	ld	r6,24(r4)
+	addi	r4,r4,32
+70:	std	r9,0(r3)
+270:	std	r8,8(r3)
+22:	ld	r9,0(r4)
+222:	ld	r8,8(r4)
+71:	std	r7,16(r3)
+271:	std	r6,24(r3)
+	addi	r3,r3,32
 	bdnz	21b
-72:	std	r8,8(r3)
+72:	std	r9,0(r3)
+272:	std	r8,8(r3)
+	andi.	r5,r5,0xf
 	beq+	3f
-	addi	r3,r3,16
+	addi	r4,r4,16
 .Ldo_tail:
-	bf	cr7*4+1,1f
-23:	lwz	r9,8(r4)
+	addi	r3,r3,16
+	bf	cr7*4+0,246f
+244:	ld	r9,0(r4)
+	addi	r4,r4,8
+245:	std	r9,0(r3)
+	addi	r3,r3,8
+246:	bf	cr7*4+1,1f
+23:	lwz	r9,0(r4)
 	addi	r4,r4,4
 73:	stw	r9,0(r3)
 	addi	r3,r3,4
 1:	bf	cr7*4+2,2f
-44:	lhz	r9,8(r4)
+44:	lhz	r9,0(r4)
 	addi	r4,r4,2
 74:	sth	r9,0(r3)
 	addi	r3,r3,2
 2:	bf	cr7*4+3,3f
-45:	lbz	r9,8(r4)
+45:	lbz	r9,0(r4)
 75:	stb	r9,0(r3)
 3:	li	r3,0
 	blr
@@ -220,7 +238,9 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD)
 131:
 	addi	r3,r3,8
 120:
+320:
 122:
+322:
 124:
 125:
 126:
@@ -229,9 +249,11 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD)
 129:
 133:
 	addi	r3,r3,8
-121:
 132:
 	addi	r3,r3,8
+121:
+321:
+344:
 134:
 135:
 138:
@@ -303,18 +325,22 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD)
 183:
 	add	r3,r3,r7
 	b	1f
+371:
 180:
 	addi	r3,r3,8
 171:
 177:
 	addi	r3,r3,8
-170:
-172:
+370:
+372:
 176:
 178:
 	addi	r3,r3,4
 185:
 	addi	r3,r3,4
+170:
+172:
+345:
 173:
 174:
 175:
@@ -341,11 +367,19 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD)
 	.section __ex_table,"a"
 	.align	3
 	.llong	20b,120b
+	.llong	220b,320b
 	.llong	21b,121b
+	.llong	221b,321b
 	.llong	70b,170b
+	.llong	270b,370b
 	.llong	22b,122b
+	.llong	222b,322b
 	.llong	71b,171b
+	.llong	271b,371b
 	.llong	72b,172b
+	.llong	272b,372b
+	.llong	244b,344b
+	.llong	245b,345b
 	.llong	23b,123b
 	.llong	73b,173b
 	.llong	44b,144b

arch/powerpc/lib/feature-fixups.c

@@ -112,7 +112,8 @@ void do_feature_fixups(unsigned long value, void *fixup_start, void *fixup_end)
 
 void do_lwsync_fixups(unsigned long value, void *fixup_start, void *fixup_end)
 {
-	unsigned int *start, *end, *dest;
+	long *start, *end;
+	unsigned int *dest;
 
 	if (!(value & CPU_FTR_LWSYNC))
 		return ;

arch/powerpc/mm/40x_mmu.c

@@ -84,8 +84,8 @@ void __init MMU_init_hw(void)
 	 * vectors and the kernel live in real-mode.
 	 */
 
-        mtspr(SPRN_DCCR, 0xF0000000);	/* 512 MB of data space at 0x0. */
-        mtspr(SPRN_ICCR, 0xF0000000);	/* 512 MB of instr. space at 0x0. */
+        mtspr(SPRN_DCCR, 0xFFFF0000);	/* 2GByte of data space at 0x0. */
+        mtspr(SPRN_ICCR, 0xFFFF0000);	/* 2GByte of instr. space at 0x0. */
 }
 
 #define LARGE_PAGE_SIZE_16M	(1<<24)

arch/powerpc/mm/hash_native_64.c

@@ -37,7 +37,7 @@
 
 #define HPTE_LOCK_BIT 3
 
-static DEFINE_SPINLOCK(native_tlbie_lock);
+static DEFINE_RAW_SPINLOCK(native_tlbie_lock);
 
 static inline void __tlbie(unsigned long va, int psize, int ssize)
 {
@@ -104,7 +104,7 @@ static inline void tlbie(unsigned long va, int psize, int ssize, int local)
 	if (use_local)
 		use_local = mmu_psize_defs[psize].tlbiel;
 	if (lock_tlbie && !use_local)
-		spin_lock(&native_tlbie_lock);
+		raw_spin_lock(&native_tlbie_lock);
 	asm volatile("ptesync": : :"memory");
 	if (use_local) {
 		__tlbiel(va, psize, ssize);
@@ -114,7 +114,7 @@ static inline void tlbie(unsigned long va, int psize, int ssize, int local)
 		asm volatile("eieio; tlbsync; ptesync": : :"memory");
 	}
 	if (lock_tlbie && !use_local)
-		spin_unlock(&native_tlbie_lock);
+		raw_spin_unlock(&native_tlbie_lock);
 }
 
 static inline void native_lock_hpte(struct hash_pte *hptep)
@@ -122,7 +122,7 @@ static inline void native_lock_hpte(struct hash_pte *hptep)
 	unsigned long *word = &hptep->v;
 
 	while (1) {
-		if (!test_and_set_bit(HPTE_LOCK_BIT, word))
+		if (!test_and_set_bit_lock(HPTE_LOCK_BIT, word))
 			break;
 		while(test_bit(HPTE_LOCK_BIT, word))
 			cpu_relax();
@@ -133,8 +133,7 @@ static inline void native_unlock_hpte(struct hash_pte *hptep)
 {
 	unsigned long *word = &hptep->v;
 
-	asm volatile("lwsync":::"memory");
-	clear_bit(HPTE_LOCK_BIT, word);
+	clear_bit_unlock(HPTE_LOCK_BIT, word);
 }
 
 static long native_hpte_insert(unsigned long hpte_group, unsigned long va,
@@ -434,7 +433,7 @@ static void native_hpte_clear(void)
 	/* we take the tlbie lock and hold it.  Some hardware will
 	 * deadlock if we try to tlbie from two processors at once.
 	 */
-	spin_lock(&native_tlbie_lock);
+	raw_spin_lock(&native_tlbie_lock);
 
 	slots = pteg_count * HPTES_PER_GROUP;
 
@@ -458,7 +457,7 @@ static void native_hpte_clear(void)
 	}
 
 	asm volatile("eieio; tlbsync; ptesync":::"memory");
-	spin_unlock(&native_tlbie_lock);
+	raw_spin_unlock(&native_tlbie_lock);
 	local_irq_restore(flags);
 }
 
@@ -521,7 +520,7 @@ static void native_flush_hash_range(unsigned long number, int local)
 		int lock_tlbie = !cpu_has_feature(CPU_FTR_LOCKLESS_TLBIE);
 
 		if (lock_tlbie)
-			spin_lock(&native_tlbie_lock);
+			raw_spin_lock(&native_tlbie_lock);
 
 		asm volatile("ptesync":::"memory");
 		for (i = 0; i < number; i++) {
@@ -536,7 +535,7 @@ static void native_flush_hash_range(unsigned long number, int local)
 		asm volatile("eieio; tlbsync; ptesync":::"memory");
 
 		if (lock_tlbie)
-			spin_unlock(&native_tlbie_lock);
+			raw_spin_unlock(&native_tlbie_lock);
 	}
 
 	local_irq_restore(flags);

arch/powerpc/mm/mmu_context_hash64.c

@@ -23,7 +23,7 @@
 #include <asm/mmu_context.h>
 
 static DEFINE_SPINLOCK(mmu_context_lock);
-static DEFINE_IDR(mmu_context_idr);
+static DEFINE_IDA(mmu_context_ida);
 
 /*
  * The proto-VSID space has 2^35 - 1 segments available for user mappings.
@@ -39,11 +39,11 @@ int __init_new_context(void)
 	int err;
 
 again:
-	if (!idr_pre_get(&mmu_context_idr, GFP_KERNEL))
+	if (!ida_pre_get(&mmu_context_ida, GFP_KERNEL))
 		return -ENOMEM;
 
 	spin_lock(&mmu_context_lock);
-	err = idr_get_new_above(&mmu_context_idr, NULL, 1, &index);
+	err = ida_get_new_above(&mmu_context_ida, 1, &index);
 	spin_unlock(&mmu_context_lock);
 
 	if (err == -EAGAIN)
@@ -53,7 +53,7 @@ again:
 
 	if (index > MAX_CONTEXT) {
 		spin_lock(&mmu_context_lock);
-		idr_remove(&mmu_context_idr, index);
+		ida_remove(&mmu_context_ida, index);
 		spin_unlock(&mmu_context_lock);
 		return -ENOMEM;
 	}
@@ -85,7 +85,7 @@ int init_new_context(struct task_struct *tsk, struct mm_struct *mm)
 void __destroy_context(int context_id)
 {
 	spin_lock(&mmu_context_lock);
-	idr_remove(&mmu_context_idr, context_id);
+	ida_remove(&mmu_context_ida, context_id);
 	spin_unlock(&mmu_context_lock);
 }
 EXPORT_SYMBOL_GPL(__destroy_context);

arch/powerpc/mm/mmu_context_nohash.c

@@ -56,7 +56,7 @@ static unsigned int next_context, nr_free_contexts;
 static unsigned long *context_map;
 static unsigned long *stale_map[NR_CPUS];
 static struct mm_struct **context_mm;
-static DEFINE_SPINLOCK(context_lock);
+static DEFINE_RAW_SPINLOCK(context_lock);
 
 #define CTX_MAP_SIZE	\
 	(sizeof(unsigned long) * (last_context / BITS_PER_LONG + 1))
@@ -121,9 +121,9 @@ static unsigned int steal_context_smp(unsigned int id)
 	/* This will happen if you have more CPUs than available contexts,
 	 * all we can do here is wait a bit and try again
 	 */
-	spin_unlock(&context_lock);
+	raw_spin_unlock(&context_lock);
 	cpu_relax();
-	spin_lock(&context_lock);
+	raw_spin_lock(&context_lock);
 
 	/* This will cause the caller to try again */
 	return MMU_NO_CONTEXT;
@@ -194,7 +194,7 @@ void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next)
 	unsigned long *map;
 
 	/* No lockless fast path .. yet */
-	spin_lock(&context_lock);
+	raw_spin_lock(&context_lock);
 
 	pr_hard("[%d] activating context for mm @%p, active=%d, id=%d",
 		cpu, next, next->context.active, next->context.id);
@@ -278,7 +278,7 @@ void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next)
 	/* Flick the MMU and release lock */
 	pr_hardcont(" -> %d\n", id);
 	set_context(id, next->pgd);
-	spin_unlock(&context_lock);
+	raw_spin_unlock(&context_lock);
 }
 
 /*
@@ -307,7 +307,7 @@ void destroy_context(struct mm_struct *mm)
 
 	WARN_ON(mm->context.active != 0);
 
-	spin_lock_irqsave(&context_lock, flags);
+	raw_spin_lock_irqsave(&context_lock, flags);
 	id = mm->context.id;
 	if (id != MMU_NO_CONTEXT) {
 		__clear_bit(id, context_map);
@@ -318,7 +318,7 @@ void destroy_context(struct mm_struct *mm)
 		context_mm[id] = NULL;
 		nr_free_contexts++;
 	}
-	spin_unlock_irqrestore(&context_lock, flags);
+	raw_spin_unlock_irqrestore(&context_lock, flags);
 }
 
 #ifdef CONFIG_SMP

arch/powerpc/mm/tlb_low_64e.S

@@ -1,5 +1,5 @@
 /*
- *  Low leve TLB miss handlers for Book3E
+ *  Low level TLB miss handlers for Book3E
  *
  *  Copyright (C) 2008-2009
  *      Ben. Herrenschmidt (benh@kernel.crashing.org), IBM Corp.

arch/powerpc/mm/tlb_nohash.c

@@ -150,7 +150,7 @@ EXPORT_SYMBOL(local_flush_tlb_page);
  */
 #ifdef CONFIG_SMP
 
-static DEFINE_SPINLOCK(tlbivax_lock);
+static DEFINE_RAW_SPINLOCK(tlbivax_lock);
 
 static int mm_is_core_local(struct mm_struct *mm)
 {
@@ -232,10 +232,10 @@ void __flush_tlb_page(struct mm_struct *mm, unsigned long vmaddr,
 		if (mmu_has_feature(MMU_FTR_USE_TLBIVAX_BCAST)) {
 			int lock = mmu_has_feature(MMU_FTR_LOCK_BCAST_INVAL);
 			if (lock)
-				spin_lock(&tlbivax_lock);
+				raw_spin_lock(&tlbivax_lock);
 			_tlbivax_bcast(vmaddr, pid, tsize, ind);
 			if (lock)
-				spin_unlock(&tlbivax_lock);
+				raw_spin_unlock(&tlbivax_lock);
 			goto bail;
 		} else {
 			struct tlb_flush_param p = {

arch/powerpc/platforms/512x/clock.c

@@ -698,8 +698,7 @@ static struct clk_interface mpc5121_clk_functions = {
 	.clk_get_parent		= NULL,
 };
 
-static int
-mpc5121_clk_init(void)
+int __init mpc5121_clk_init(void)
 {
 	struct device_node *np;
 
@@ -724,6 +723,3 @@ mpc5121_clk_init(void)
 	clk_functions = mpc5121_clk_functions;
 	return 0;
 }
-
-
-arch_initcall(mpc5121_clk_init);

arch/powerpc/platforms/512x/mpc5121_ads.c

@@ -64,8 +64,9 @@ define_machine(mpc5121_ads) {
 	.name			= "MPC5121 ADS",
 	.probe			= mpc5121_ads_probe,
 	.setup_arch		= mpc5121_ads_setup_arch,
-	.init			= mpc512x_declare_of_platform_devices,
+	.init			= mpc512x_init,
 	.init_IRQ		= mpc5121_ads_init_IRQ,
 	.get_irq		= ipic_get_irq,
 	.calibrate_decr		= generic_calibrate_decr,
+	.restart		= mpc512x_restart,
 };

arch/powerpc/platforms/512x/mpc5121_ads_cpld.c

@@ -79,7 +79,7 @@ cpld_unmask_irq(unsigned int irq)
 }
 
 static struct irq_chip cpld_pic = {
-	.name = " CPLD PIC ",
+	.name = "CPLD PIC",
 	.mask = cpld_mask_irq,
 	.ack = cpld_mask_irq,
 	.unmask = cpld_unmask_irq,

arch/powerpc/platforms/512x/mpc5121_generic.c

@@ -51,8 +51,9 @@ static int __init mpc5121_generic_probe(void)
 define_machine(mpc5121_generic) {
 	.name			= "MPC5121 generic",
 	.probe			= mpc5121_generic_probe,
-	.init			= mpc512x_declare_of_platform_devices,
+	.init			= mpc512x_init,
 	.init_IRQ		= mpc512x_init_IRQ,
 	.get_irq		= ipic_get_irq,
 	.calibrate_decr		= generic_calibrate_decr,
+	.restart		= mpc512x_restart,
 };

arch/powerpc/platforms/512x/mpc512x.h

@@ -12,5 +12,8 @@
 #ifndef __MPC512X_H__
 #define __MPC512X_H__
 extern void __init mpc512x_init_IRQ(void);
+extern void __init mpc512x_init(void);
+extern int __init mpc5121_clk_init(void);
 void __init mpc512x_declare_of_platform_devices(void);
+extern void mpc512x_restart(char *cmd);
 #endif				/* __MPC512X_H__ */

arch/powerpc/platforms/512x/mpc512x_shared.c

@@ -21,9 +21,38 @@
 #include <asm/ipic.h>
 #include <asm/prom.h>
 #include <asm/time.h>
+#include <asm/mpc5121.h>
 
 #include "mpc512x.h"
 
+static struct mpc512x_reset_module __iomem *reset_module_base;
+
+static void __init mpc512x_restart_init(void)
+{
+	struct device_node *np;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-reset");
+	if (!np)
+		return;
+
+	reset_module_base = of_iomap(np, 0);
+	of_node_put(np);
+}
+
+void mpc512x_restart(char *cmd)
+{
+	if (reset_module_base) {
+		/* Enable software reset "RSTE" */
+		out_be32(&reset_module_base->rpr, 0x52535445);
+		/* Set software hard reset */
+		out_be32(&reset_module_base->rcr, 0x2);
+	} else {
+		pr_err("Restart module not mapped.\n");
+	}
+	for (;;)
+		;
+}
+
 void __init mpc512x_init_IRQ(void)
 {
 	struct device_node *np;
@@ -53,8 +82,22 @@ static struct of_device_id __initdata of_bus_ids[] = {
 
 void __init mpc512x_declare_of_platform_devices(void)
 {
+	struct device_node *np;
+
 	if (of_platform_bus_probe(NULL, of_bus_ids, NULL))
 		printk(KERN_ERR __FILE__ ": "
 			"Error while probing of_platform bus\n");
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-nfc");
+	if (np) {
+		of_platform_device_create(np, NULL, NULL);
+		of_node_put(np);
+	}
 }
 
+void __init mpc512x_init(void)
+{
+	mpc512x_declare_of_platform_devices();
+	mpc5121_clk_init();
+	mpc512x_restart_init();
+}

arch/powerpc/platforms/85xx/mpc85xx_mds.c

@@ -302,11 +302,14 @@ static struct of_device_id mpc85xx_ids[] = {
 	{ .compatible = "gianfar", },
 	{ .compatible = "fsl,rapidio-delta", },
 	{ .compatible = "fsl,mpc8548-guts", },
+	{ .compatible = "gpio-leds", },
 	{},
 };
 
 static int __init mpc85xx_publish_devices(void)
 {
+	if (machine_is(mpc8568_mds))
+		simple_gpiochip_init("fsl,mpc8568mds-bcsr-gpio");
 	if (machine_is(mpc8569_mds))
 		simple_gpiochip_init("fsl,mpc8569mds-bcsr-gpio");
 

arch/powerpc/platforms/85xx/socrates_fpga_pic.c

@@ -232,7 +232,7 @@ static int socrates_fpga_pic_set_type(unsigned int virq,
 }
 
 static struct irq_chip socrates_fpga_pic_chip = {
-	.name		= " FPGA-PIC ",
+	.name		= "FPGA-PIC",
 	.ack		= socrates_fpga_pic_ack,
 	.mask           = socrates_fpga_pic_mask,
 	.mask_ack       = socrates_fpga_pic_mask_ack,

arch/powerpc/platforms/85xx/stx_gp3.c

@@ -134,7 +134,7 @@ static void stx_gp3_show_cpuinfo(struct seq_file *m)
 	pvid = mfspr(SPRN_PVR);
 	svid = mfspr(SPRN_SVR);
 
-	seq_printf(m, "Vendor\t\t: RPC Electronics STx \n");
+	seq_printf(m, "Vendor\t\t: RPC Electronics STx\n");
 	seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
 	seq_printf(m, "SVR\t\t: 0x%x\n", svid);
 

arch/powerpc/platforms/cell/beat_htab.c

@@ -40,7 +40,7 @@
 #define DBG_LOW(fmt...) do { } while (0)
 #endif
 
-static DEFINE_SPINLOCK(beat_htab_lock);
+static DEFINE_RAW_SPINLOCK(beat_htab_lock);
 
 static inline unsigned int beat_read_mask(unsigned hpte_group)
 {
@@ -114,18 +114,18 @@ static long beat_lpar_hpte_insert(unsigned long hpte_group,
 	if (rflags & _PAGE_NO_CACHE)
 		hpte_r &= ~_PAGE_COHERENT;
 
-	spin_lock(&beat_htab_lock);
+	raw_spin_lock(&beat_htab_lock);
 	lpar_rc = beat_read_mask(hpte_group);
 	if (lpar_rc == 0) {
 		if (!(vflags & HPTE_V_BOLTED))
 			DBG_LOW(" full\n");
-		spin_unlock(&beat_htab_lock);
+		raw_spin_unlock(&beat_htab_lock);
 		return -1;
 	}
 
 	lpar_rc = beat_insert_htab_entry(0, hpte_group, lpar_rc << 48,
 		hpte_v, hpte_r, &slot);
-	spin_unlock(&beat_htab_lock);
+	raw_spin_unlock(&beat_htab_lock);
 
 	/*
 	 * Since we try and ioremap PHBs we don't own, the pte insert
@@ -198,17 +198,17 @@ static long beat_lpar_hpte_updatepp(unsigned long slot,
 		"avpnv=%016lx, slot=%016lx, psize: %d, newpp %016lx ... ",
 		want_v & HPTE_V_AVPN, slot, psize, newpp);
 
-	spin_lock(&beat_htab_lock);
+	raw_spin_lock(&beat_htab_lock);
 	dummy0 = beat_lpar_hpte_getword0(slot);
 	if ((dummy0 & ~0x7FUL) != (want_v & ~0x7FUL)) {
 		DBG_LOW("not found !\n");
-		spin_unlock(&beat_htab_lock);
+		raw_spin_unlock(&beat_htab_lock);
 		return -1;
 	}
 
 	lpar_rc = beat_write_htab_entry(0, slot, 0, newpp, 0, 7, &dummy0,
 					&dummy1);
-	spin_unlock(&beat_htab_lock);
+	raw_spin_unlock(&beat_htab_lock);
 	if (lpar_rc != 0 || dummy0 == 0) {
 		DBG_LOW("not found !\n");
 		return -1;
@@ -262,13 +262,13 @@ static void beat_lpar_hpte_updateboltedpp(unsigned long newpp,
 	vsid = get_kernel_vsid(ea, MMU_SEGSIZE_256M);
 	va = (vsid << 28) | (ea & 0x0fffffff);
 
-	spin_lock(&beat_htab_lock);
+	raw_spin_lock(&beat_htab_lock);
 	slot = beat_lpar_hpte_find(va, psize);
 	BUG_ON(slot == -1);
 
 	lpar_rc = beat_write_htab_entry(0, slot, 0, newpp, 0, 7,
 		&dummy0, &dummy1);
-	spin_unlock(&beat_htab_lock);
+	raw_spin_unlock(&beat_htab_lock);
 
 	BUG_ON(lpar_rc != 0);
 }
@@ -285,18 +285,18 @@ static void beat_lpar_hpte_invalidate(unsigned long slot, unsigned long va,
 		slot, va, psize, local);
 	want_v = hpte_encode_v(va, psize, MMU_SEGSIZE_256M);
 
-	spin_lock_irqsave(&beat_htab_lock, flags);
+	raw_spin_lock_irqsave(&beat_htab_lock, flags);
 	dummy1 = beat_lpar_hpte_getword0(slot);
 
 	if ((dummy1 & ~0x7FUL) != (want_v & ~0x7FUL)) {
 		DBG_LOW("not found !\n");
-		spin_unlock_irqrestore(&beat_htab_lock, flags);
+		raw_spin_unlock_irqrestore(&beat_htab_lock, flags);
 		return;
 	}
 
 	lpar_rc = beat_write_htab_entry(0, slot, 0, 0, HPTE_V_VALID, 0,
 		&dummy1, &dummy2);
-	spin_unlock_irqrestore(&beat_htab_lock, flags);
+	raw_spin_unlock_irqrestore(&beat_htab_lock, flags);
 
 	BUG_ON(lpar_rc != 0);
 }

arch/powerpc/platforms/cell/beat_interrupt.c

@@ -30,7 +30,7 @@
 #include "beat_wrapper.h"
 
 #define	MAX_IRQS	NR_IRQS
-static DEFINE_SPINLOCK(beatic_irq_mask_lock);
+static DEFINE_RAW_SPINLOCK(beatic_irq_mask_lock);
 static uint64_t	beatic_irq_mask_enable[(MAX_IRQS+255)/64];
 static uint64_t	beatic_irq_mask_ack[(MAX_IRQS+255)/64];
 
@@ -65,30 +65,30 @@ static void beatic_mask_irq(unsigned int irq_plug)
 {
 	unsigned long flags;
 
-	spin_lock_irqsave(&beatic_irq_mask_lock, flags);
+	raw_spin_lock_irqsave(&beatic_irq_mask_lock, flags);
 	beatic_irq_mask_enable[irq_plug/64] &= ~(1UL << (63 - (irq_plug%64)));
 	beatic_update_irq_mask(irq_plug);
-	spin_unlock_irqrestore(&beatic_irq_mask_lock, flags);
+	raw_spin_unlock_irqrestore(&beatic_irq_mask_lock, flags);
 }
 
 static void beatic_unmask_irq(unsigned int irq_plug)
 {
 	unsigned long flags;
 
-	spin_lock_irqsave(&beatic_irq_mask_lock, flags);
+	raw_spin_lock_irqsave(&beatic_irq_mask_lock, flags);
 	beatic_irq_mask_enable[irq_plug/64] |= 1UL << (63 - (irq_plug%64));
 	beatic_update_irq_mask(irq_plug);
-	spin_unlock_irqrestore(&beatic_irq_mask_lock, flags);
+	raw_spin_unlock_irqrestore(&beatic_irq_mask_lock, flags);
 }
 
 static void beatic_ack_irq(unsigned int irq_plug)
 {
 	unsigned long flags;
 
-	spin_lock_irqsave(&beatic_irq_mask_lock, flags);
+	raw_spin_lock_irqsave(&beatic_irq_mask_lock, flags);
 	beatic_irq_mask_ack[irq_plug/64] &= ~(1UL << (63 - (irq_plug%64)));
 	beatic_update_irq_mask(irq_plug);
-	spin_unlock_irqrestore(&beatic_irq_mask_lock, flags);
+	raw_spin_unlock_irqrestore(&beatic_irq_mask_lock, flags);
 }
 
 static void beatic_end_irq(unsigned int irq_plug)
@@ -103,14 +103,14 @@ static void beatic_end_irq(unsigned int irq_plug)
 
 		printk(KERN_ERR "IRQ over-downcounted, plug %d\n", irq_plug);
 	}
-	spin_lock_irqsave(&beatic_irq_mask_lock, flags);
+	raw_spin_lock_irqsave(&beatic_irq_mask_lock, flags);
 	beatic_irq_mask_ack[irq_plug/64] |= 1UL << (63 - (irq_plug%64));
 	beatic_update_irq_mask(irq_plug);
-	spin_unlock_irqrestore(&beatic_irq_mask_lock, flags);
+	raw_spin_unlock_irqrestore(&beatic_irq_mask_lock, flags);
 }
 
 static struct irq_chip beatic_pic = {
-	.name = " CELL-BEAT ",
+	.name = "CELL-BEAT",
 	.unmask = beatic_unmask_irq,
 	.mask = beatic_mask_irq,
 	.eoi = beatic_end_irq,

arch/powerpc/platforms/cell/interrupt.c

@@ -88,7 +88,7 @@ static void iic_eoi(unsigned int irq)
 }
 
 static struct irq_chip iic_chip = {
-	.name = " CELL-IIC ",
+	.name = "CELL-IIC",
 	.mask = iic_mask,
 	.unmask = iic_unmask,
 	.eoi = iic_eoi,
@@ -133,7 +133,7 @@ static void iic_ioexc_cascade(unsigned int irq, struct irq_desc *desc)
 
 
 static struct irq_chip iic_ioexc_chip = {
-	.name = " CELL-IOEX",
+	.name = "CELL-IOEX",
 	.mask = iic_mask,
 	.unmask = iic_unmask,
 	.eoi = iic_ioexc_eoi,

arch/powerpc/platforms/cell/spider-pic.c

@@ -168,7 +168,7 @@ static int spider_set_irq_type(unsigned int virq, unsigned int type)
 }
 
 static struct irq_chip spider_pic = {
-	.name = " SPIDER   ",
+	.name = "SPIDER",
 	.unmask = spider_unmask_irq,
 	.mask = spider_mask_irq,
 	.ack = spider_ack_irq,

arch/powerpc/platforms/iseries/irq.c

@@ -273,7 +273,7 @@ static void iseries_end_IRQ(unsigned int irq)
 }
 
 static struct irq_chip iseries_pic = {
-	.name	= "iSeries irq controller",
+	.name		= "iSeries",
 	.startup	= iseries_startup_IRQ,
 	.shutdown	= iseries_shutdown_IRQ,
 	.unmask		= iseries_enable_IRQ,

arch/powerpc/platforms/iseries/proc.c

@@ -85,7 +85,7 @@ static int proc_titantod_show(struct seq_file *m, void *v)
 
 		seq_printf(m, "  titan elapsed = %lu uSec\n", titan_usec);
 		seq_printf(m, "  tb elapsed    = %lu ticks\n", tb_ticks);
-		seq_printf(m, "  titan jiffies = %lu.%04lu \n", titan_jiffies,
+		seq_printf(m, "  titan jiffies = %lu.%04lu\n", titan_jiffies,
 			   titan_jiff_rem_usec);
 		seq_printf(m, "  tb jiffies    = %lu.%04lu\n", tb_jiffies,
 			   tb_jiff_rem_usec);

arch/powerpc/platforms/iseries/setup.c

@@ -256,7 +256,7 @@ static unsigned long iSeries_process_mainstore_vpd(struct MemoryBlock *mb_array,
 		mem_blocks = iSeries_process_Condor_mainstore_vpd(mb_array,
 				max_entries);
 
-	printk("Mainstore_VPD: numMemoryBlocks = %ld \n", mem_blocks);
+	printk("Mainstore_VPD: numMemoryBlocks = %ld\n", mem_blocks);
 	for (i = 0; i < mem_blocks; ++i) {
 		printk("Mainstore_VPD: block %3ld logical chunks %016lx - %016lx\n"
 		       "                             abs chunks %016lx - %016lx\n",

arch/powerpc/platforms/powermac/bootx_init.c

@@ -539,7 +539,7 @@ void __init bootx_init(unsigned long r3, unsigned long r4)
 		if (model
 		    && (strcmp(model, "iMac,1") == 0
 			|| strcmp(model, "PowerMac1,1") == 0)) {
-			bootx_printf("iMac,1 detected, shutting down USB \n");
+			bootx_printf("iMac,1 detected, shutting down USB\n");
 			out_le32((unsigned __iomem *)0x80880008, 1);	/* XXX */
 		}
 	}
@@ -554,7 +554,7 @@ void __init bootx_init(unsigned long r3, unsigned long r4)
 	} else
 		space = bi->totalParamsSize;
 
-	bootx_printf("Total space used by parameters & ramdisk: 0x%x \n", space);
+	bootx_printf("Total space used by parameters & ramdisk: 0x%x\n", space);
 
 	/* New BootX will have flushed all TLBs and enters kernel with
 	 * MMU switched OFF, so this should not be useful anymore.

arch/powerpc/platforms/powermac/feature.c

@@ -59,10 +59,10 @@ extern struct device_node *k2_skiplist[2];
  * We use a single global lock to protect accesses. Each driver has
  * to take care of its own locking
  */
-DEFINE_SPINLOCK(feature_lock);
+DEFINE_RAW_SPINLOCK(feature_lock);
 
-#define LOCK(flags)	spin_lock_irqsave(&feature_lock, flags);
-#define UNLOCK(flags)	spin_unlock_irqrestore(&feature_lock, flags);
+#define LOCK(flags)	raw_spin_lock_irqsave(&feature_lock, flags);
+#define UNLOCK(flags)	raw_spin_unlock_irqrestore(&feature_lock, flags);
 
 
 /*

arch/powerpc/platforms/powermac/nvram.c

@@ -80,7 +80,7 @@ static int is_core_99;
 static int core99_bank = 0;
 static int nvram_partitions[3];
 // XXX Turn that into a sem
-static DEFINE_SPINLOCK(nv_lock);
+static DEFINE_RAW_SPINLOCK(nv_lock);
 
 static int (*core99_write_bank)(int bank, u8* datas);
 static int (*core99_erase_bank)(int bank);
@@ -165,10 +165,10 @@ static unsigned char indirect_nvram_read_byte(int addr)
 	unsigned char val;
 	unsigned long flags;
 
-	spin_lock_irqsave(&nv_lock, flags);
+	raw_spin_lock_irqsave(&nv_lock, flags);
 	out_8(nvram_addr, addr >> 5);
 	val = in_8(&nvram_data[(addr & 0x1f) << 4]);
-	spin_unlock_irqrestore(&nv_lock, flags);
+	raw_spin_unlock_irqrestore(&nv_lock, flags);
 
 	return val;
 }
@@ -177,10 +177,10 @@ static void indirect_nvram_write_byte(int addr, unsigned char val)
 {
 	unsigned long flags;
 
-	spin_lock_irqsave(&nv_lock, flags);
+	raw_spin_lock_irqsave(&nv_lock, flags);
 	out_8(nvram_addr, addr >> 5);
 	out_8(&nvram_data[(addr & 0x1f) << 4], val);
-	spin_unlock_irqrestore(&nv_lock, flags);
+	raw_spin_unlock_irqrestore(&nv_lock, flags);
 }
 
 
@@ -481,7 +481,7 @@ static void core99_nvram_sync(void)
 	if (!is_core_99 || !nvram_data || !nvram_image)
 		return;
 
-	spin_lock_irqsave(&nv_lock, flags);
+	raw_spin_lock_irqsave(&nv_lock, flags);
 	if (!memcmp(nvram_image, (u8*)nvram_data + core99_bank*NVRAM_SIZE,
 		NVRAM_SIZE))
 		goto bail;
@@ -503,7 +503,7 @@ static void core99_nvram_sync(void)
 		if (core99_write_bank(core99_bank, nvram_image))
 			printk("nvram: Error writing bank %d\n", core99_bank);
  bail:
-	spin_unlock_irqrestore(&nv_lock, flags);
+	raw_spin_unlock_irqrestore(&nv_lock, flags);
 
 #ifdef DEBUG
        	mdelay(2000);

arch/powerpc/platforms/powermac/pfunc_base.c

@@ -50,13 +50,13 @@ static int macio_do_gpio_write(PMF_STD_ARGS, u8 value, u8 mask)
 		value = ~value;
 
 	/* Toggle the GPIO */
-	spin_lock_irqsave(&feature_lock, flags);
+	raw_spin_lock_irqsave(&feature_lock, flags);
 	tmp = readb(addr);
 	tmp = (tmp & ~mask) | (value & mask);
 	DBG("Do write 0x%02x to GPIO %s (%p)\n",
 	    tmp, func->node->full_name, addr);
 	writeb(tmp, addr);
-	spin_unlock_irqrestore(&feature_lock, flags);
+	raw_spin_unlock_irqrestore(&feature_lock, flags);
 
 	return 0;
 }
@@ -145,9 +145,9 @@ static int macio_do_write_reg32(PMF_STD_ARGS, u32 offset, u32 value, u32 mask)
 	struct macio_chip *macio = func->driver_data;
 	unsigned long flags;
 
-	spin_lock_irqsave(&feature_lock, flags);
+	raw_spin_lock_irqsave(&feature_lock, flags);
 	MACIO_OUT32(offset, (MACIO_IN32(offset) & ~mask) | (value & mask));
-	spin_unlock_irqrestore(&feature_lock, flags);
+	raw_spin_unlock_irqrestore(&feature_lock, flags);
 	return 0;
 }
 
@@ -168,9 +168,9 @@ static int macio_do_write_reg8(PMF_STD_ARGS, u32 offset, u8 value, u8 mask)
 	struct macio_chip *macio = func->driver_data;
 	unsigned long flags;
 
-	spin_lock_irqsave(&feature_lock, flags);
+	raw_spin_lock_irqsave(&feature_lock, flags);
 	MACIO_OUT8(offset, (MACIO_IN8(offset) & ~mask) | (value & mask));
-	spin_unlock_irqrestore(&feature_lock, flags);
+	raw_spin_unlock_irqrestore(&feature_lock, flags);
 	return 0;
 }
 
@@ -223,12 +223,12 @@ static int macio_do_write_reg32_slm(PMF_STD_ARGS, u32 offset, u32 shift,
 	if (args == NULL || args->count == 0)
 		return -EINVAL;
 
-	spin_lock_irqsave(&feature_lock, flags);
+	raw_spin_lock_irqsave(&feature_lock, flags);
 	tmp = MACIO_IN32(offset);
 	val = args->u[0].v << shift;
 	tmp = (tmp & ~mask) | (val & mask);
 	MACIO_OUT32(offset, tmp);
-	spin_unlock_irqrestore(&feature_lock, flags);
+	raw_spin_unlock_irqrestore(&feature_lock, flags);
 	return 0;
 }
 
@@ -243,12 +243,12 @@ static int macio_do_write_reg8_slm(PMF_STD_ARGS, u32 offset, u32 shift,
 	if (args == NULL || args->count == 0)
 		return -EINVAL;
 
-	spin_lock_irqsave(&feature_lock, flags);
+	raw_spin_lock_irqsave(&feature_lock, flags);
 	tmp = MACIO_IN8(offset);
 	val = args->u[0].v << shift;
 	tmp = (tmp & ~mask) | (val & mask);
 	MACIO_OUT8(offset, tmp);
-	spin_unlock_irqrestore(&feature_lock, flags);
+	raw_spin_unlock_irqrestore(&feature_lock, flags);
 	return 0;
 }
 
@@ -278,12 +278,12 @@ static int unin_do_write_reg32(PMF_STD_ARGS, u32 offset, u32 value, u32 mask)
 {
 	unsigned long flags;
 
-	spin_lock_irqsave(&feature_lock, flags);
+	raw_spin_lock_irqsave(&feature_lock, flags);
 	/* This is fairly bogus in darwin, but it should work for our needs
 	 * implemeted that way:
 	 */
 	UN_OUT(offset, (UN_IN(offset) & ~mask) | (value & mask));
-	spin_unlock_irqrestore(&feature_lock, flags);
+	raw_spin_unlock_irqrestore(&feature_lock, flags);
 	return 0;
 }
 

arch/powerpc/platforms/powermac/pic.c

@@ -57,7 +57,7 @@ static int max_irqs;
 static int max_real_irqs;
 static u32 level_mask[4];
 
-static DEFINE_SPINLOCK(pmac_pic_lock);
+static DEFINE_RAW_SPINLOCK(pmac_pic_lock);
 
 #define NR_MASK_WORDS	((NR_IRQS + 31) / 32)
 static unsigned long ppc_lost_interrupts[NR_MASK_WORDS];
@@ -85,7 +85,7 @@ static void pmac_mask_and_ack_irq(unsigned int virq)
         int i = src >> 5;
         unsigned long flags;
 
-	spin_lock_irqsave(&pmac_pic_lock, flags);
+	raw_spin_lock_irqsave(&pmac_pic_lock, flags);
         __clear_bit(src, ppc_cached_irq_mask);
         if (__test_and_clear_bit(src, ppc_lost_interrupts))
                 atomic_dec(&ppc_n_lost_interrupts);
@@ -97,7 +97,7 @@ static void pmac_mask_and_ack_irq(unsigned int virq)
                 mb();
         } while((in_le32(&pmac_irq_hw[i]->enable) & bit)
                 != (ppc_cached_irq_mask[i] & bit));
-	spin_unlock_irqrestore(&pmac_pic_lock, flags);
+	raw_spin_unlock_irqrestore(&pmac_pic_lock, flags);
 }
 
 static void pmac_ack_irq(unsigned int virq)
@@ -107,12 +107,12 @@ static void pmac_ack_irq(unsigned int virq)
         int i = src >> 5;
         unsigned long flags;
 
-  	spin_lock_irqsave(&pmac_pic_lock, flags);
+	raw_spin_lock_irqsave(&pmac_pic_lock, flags);
 	if (__test_and_clear_bit(src, ppc_lost_interrupts))
                 atomic_dec(&ppc_n_lost_interrupts);
         out_le32(&pmac_irq_hw[i]->ack, bit);
         (void)in_le32(&pmac_irq_hw[i]->ack);
-	spin_unlock_irqrestore(&pmac_pic_lock, flags);
+	raw_spin_unlock_irqrestore(&pmac_pic_lock, flags);
 }
 
 static void __pmac_set_irq_mask(unsigned int irq_nr, int nokicklost)
@@ -152,12 +152,12 @@ static unsigned int pmac_startup_irq(unsigned int virq)
         unsigned long bit = 1UL << (src & 0x1f);
         int i = src >> 5;
 
-	spin_lock_irqsave(&pmac_pic_lock, flags);
+	raw_spin_lock_irqsave(&pmac_pic_lock, flags);
 	if ((irq_to_desc(virq)->status & IRQ_LEVEL) == 0)
 		out_le32(&pmac_irq_hw[i]->ack, bit);
         __set_bit(src, ppc_cached_irq_mask);
         __pmac_set_irq_mask(src, 0);
-	spin_unlock_irqrestore(&pmac_pic_lock, flags);
+	raw_spin_unlock_irqrestore(&pmac_pic_lock, flags);
 
 	return 0;
 }
@@ -167,10 +167,10 @@ static void pmac_mask_irq(unsigned int virq)
 	unsigned long flags;
 	unsigned int src = irq_map[virq].hwirq;
 
-  	spin_lock_irqsave(&pmac_pic_lock, flags);
+	raw_spin_lock_irqsave(&pmac_pic_lock, flags);
         __clear_bit(src, ppc_cached_irq_mask);
         __pmac_set_irq_mask(src, 1);
-  	spin_unlock_irqrestore(&pmac_pic_lock, flags);
+	raw_spin_unlock_irqrestore(&pmac_pic_lock, flags);
 }
 
 static void pmac_unmask_irq(unsigned int virq)
@@ -178,24 +178,24 @@ static void pmac_unmask_irq(unsigned int virq)
 	unsigned long flags;
 	unsigned int src = irq_map[virq].hwirq;
 
-	spin_lock_irqsave(&pmac_pic_lock, flags);
+	raw_spin_lock_irqsave(&pmac_pic_lock, flags);
 	__set_bit(src, ppc_cached_irq_mask);
         __pmac_set_irq_mask(src, 0);
-  	spin_unlock_irqrestore(&pmac_pic_lock, flags);
+	raw_spin_unlock_irqrestore(&pmac_pic_lock, flags);
 }
 
 static int pmac_retrigger(unsigned int virq)
 {
 	unsigned long flags;
 
-  	spin_lock_irqsave(&pmac_pic_lock, flags);
+	raw_spin_lock_irqsave(&pmac_pic_lock, flags);
 	__pmac_retrigger(irq_map[virq].hwirq);
-  	spin_unlock_irqrestore(&pmac_pic_lock, flags);
+	raw_spin_unlock_irqrestore(&pmac_pic_lock, flags);
 	return 1;
 }
 
 static struct irq_chip pmac_pic = {
-	.name		= " PMAC-PIC ",
+	.name		= "PMAC-PIC",
 	.startup	= pmac_startup_irq,
 	.mask		= pmac_mask_irq,
 	.ack		= pmac_ack_irq,
@@ -210,7 +210,7 @@ static irqreturn_t gatwick_action(int cpl, void *dev_id)
 	int irq, bits;
 	int rc = IRQ_NONE;
 
-  	spin_lock_irqsave(&pmac_pic_lock, flags);
+	raw_spin_lock_irqsave(&pmac_pic_lock, flags);
 	for (irq = max_irqs; (irq -= 32) >= max_real_irqs; ) {
 		int i = irq >> 5;
 		bits = in_le32(&pmac_irq_hw[i]->event) | ppc_lost_interrupts[i];
@@ -220,12 +220,12 @@ static irqreturn_t gatwick_action(int cpl, void *dev_id)
 		if (bits == 0)
 			continue;
 		irq += __ilog2(bits);
-		spin_unlock_irqrestore(&pmac_pic_lock, flags);
+		raw_spin_unlock_irqrestore(&pmac_pic_lock, flags);
 		generic_handle_irq(irq);
-		spin_lock_irqsave(&pmac_pic_lock, flags);
+		raw_spin_lock_irqsave(&pmac_pic_lock, flags);
 		rc = IRQ_HANDLED;
 	}
-  	spin_unlock_irqrestore(&pmac_pic_lock, flags);
+	raw_spin_unlock_irqrestore(&pmac_pic_lock, flags);
 	return rc;
 }
 
@@ -244,7 +244,7 @@ static unsigned int pmac_pic_get_irq(void)
 		return NO_IRQ_IGNORE;	/* ignore, already handled */
         }
 #endif /* CONFIG_SMP */
-  	spin_lock_irqsave(&pmac_pic_lock, flags);
+	raw_spin_lock_irqsave(&pmac_pic_lock, flags);
 	for (irq = max_real_irqs; (irq -= 32) >= 0; ) {
 		int i = irq >> 5;
 		bits = in_le32(&pmac_irq_hw[i]->event) | ppc_lost_interrupts[i];
@@ -256,7 +256,7 @@ static unsigned int pmac_pic_get_irq(void)
 		irq += __ilog2(bits);
 		break;
 	}
-  	spin_unlock_irqrestore(&pmac_pic_lock, flags);
+	raw_spin_unlock_irqrestore(&pmac_pic_lock, flags);
 	if (unlikely(irq < 0))
 		return NO_IRQ;
 	return irq_linear_revmap(pmac_pic_host, irq);

arch/powerpc/platforms/pseries/eeh.c

@@ -100,7 +100,7 @@ int eeh_subsystem_enabled;
 EXPORT_SYMBOL(eeh_subsystem_enabled);
 
 /* Lock to avoid races due to multiple reports of an error */
-static DEFINE_SPINLOCK(confirm_error_lock);
+static DEFINE_RAW_SPINLOCK(confirm_error_lock);
 
 /* Buffer for reporting slot-error-detail rtas calls. Its here
  * in BSS, and not dynamically alloced, so that it ends up in
@@ -436,7 +436,7 @@ static void __eeh_clear_slot(struct device_node *parent, int mode_flag)
 void eeh_clear_slot (struct device_node *dn, int mode_flag)
 {
 	unsigned long flags;
-	spin_lock_irqsave(&confirm_error_lock, flags);
+	raw_spin_lock_irqsave(&confirm_error_lock, flags);
 	
 	dn = find_device_pe (dn);
 	
@@ -447,7 +447,7 @@ void eeh_clear_slot (struct device_node *dn, int mode_flag)
 	PCI_DN(dn)->eeh_mode &= ~mode_flag;
 	PCI_DN(dn)->eeh_check_count = 0;
 	__eeh_clear_slot(dn, mode_flag);
-	spin_unlock_irqrestore(&confirm_error_lock, flags);
+	raw_spin_unlock_irqrestore(&confirm_error_lock, flags);
 }
 
 /**
@@ -491,7 +491,7 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev)
 	    pdn->eeh_mode & EEH_MODE_NOCHECK) {
 		ignored_check++;
 		pr_debug("EEH: Ignored check (%x) for %s %s\n",
-			 pdn->eeh_mode, pci_name (dev), dn->full_name);
+			 pdn->eeh_mode, eeh_pci_name(dev), dn->full_name);
 		return 0;
 	}
 
@@ -506,7 +506,7 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev)
 	 * in one slot might report errors simultaneously, and we
 	 * only want one error recovery routine running.
 	 */
-	spin_lock_irqsave(&confirm_error_lock, flags);
+	raw_spin_lock_irqsave(&confirm_error_lock, flags);
 	rc = 1;
 	if (pdn->eeh_mode & EEH_MODE_ISOLATED) {
 		pdn->eeh_check_count ++;
@@ -515,7 +515,7 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev)
 			printk (KERN_ERR "EEH: %d reads ignored for recovering device at "
 				"location=%s driver=%s pci addr=%s\n",
 				pdn->eeh_check_count, location,
-				dev->driver->name, pci_name(dev));
+				dev->driver->name, eeh_pci_name(dev));
 			printk (KERN_ERR "EEH: Might be infinite loop in %s driver\n",
 				dev->driver->name);
 			dump_stack();
@@ -575,7 +575,7 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev)
 	 * with other functions on this device, and functions under
 	 * bridges. */
 	eeh_mark_slot (dn, EEH_MODE_ISOLATED);
-	spin_unlock_irqrestore(&confirm_error_lock, flags);
+	raw_spin_unlock_irqrestore(&confirm_error_lock, flags);
 
 	eeh_send_failure_event (dn, dev);
 
@@ -586,7 +586,7 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev)
 	return 1;
 
 dn_unlock:
-	spin_unlock_irqrestore(&confirm_error_lock, flags);
+	raw_spin_unlock_irqrestore(&confirm_error_lock, flags);
 	return rc;
 }
 
@@ -1064,7 +1064,7 @@ void __init eeh_init(void)
 	struct device_node *phb, *np;
 	struct eeh_early_enable_info info;
 
-	spin_lock_init(&confirm_error_lock);
+	raw_spin_lock_init(&confirm_error_lock);
 	spin_lock_init(&slot_errbuf_lock);
 
 	np = of_find_node_by_path("/rtas");

arch/powerpc/platforms/pseries/eeh_driver.c

@@ -337,7 +337,7 @@ struct pci_dn * handle_eeh_events (struct eeh_event *event)
 		location = location ? location : "unknown";
 		printk(KERN_ERR "EEH: Error: Cannot find partition endpoint "
 		                "for location=%s pci addr=%s\n",
-		        location, pci_name(event->dev));
+		        location, eeh_pci_name(event->dev));
 		return NULL;
 	}
 
@@ -368,7 +368,7 @@ struct pci_dn * handle_eeh_events (struct eeh_event *event)
 		pci_str = pci_name (frozen_pdn->pcidev);
 		drv_str = pcid_name (frozen_pdn->pcidev);
 	} else {
-		pci_str = pci_name (event->dev);
+		pci_str = eeh_pci_name(event->dev);
 		drv_str = pcid_name (event->dev);
 	}
 	
@@ -478,9 +478,9 @@ excess_failures:
 	 * due to actual, failed cards.
 	 */
 	printk(KERN_ERR
-	   "EEH: PCI device at location=%s driver=%s pci addr=%s \n"
+	   "EEH: PCI device at location=%s driver=%s pci addr=%s\n"
 		"has failed %d times in the last hour "
-		"and has been permanently disabled. \n"
+		"and has been permanently disabled.\n"
 		"Please try reseating this device or replacing it.\n",
 		location, drv_str, pci_str, frozen_pdn->eeh_freeze_count);
 	goto perm_error;
@@ -488,7 +488,7 @@ excess_failures:
 hard_fail:
 	printk(KERN_ERR
 	   "EEH: Unable to recover from failure of PCI device "
-	   "at location=%s driver=%s pci addr=%s \n"
+	   "at location=%s driver=%s pci addr=%s\n"
 	   "Please try reseating this device or replacing it.\n",
 		location, drv_str, pci_str);
 

arch/powerpc/platforms/pseries/eeh_event.c

@@ -80,7 +80,7 @@ static int eeh_event_handler(void * dummy)
 	eeh_mark_slot(event->dn, EEH_MODE_RECOVERING);
 
 	printk(KERN_INFO "EEH: Detected PCI bus error on device %s\n",
-	       pci_name(event->dev));
+	       eeh_pci_name(event->dev));
 
 	pdn = handle_eeh_events(event);
 

arch/powerpc/platforms/pseries/hotplug-cpu.c

@@ -387,24 +387,12 @@ static char cede_parameters[CEDE_LATENCY_PARAM_MAX_LENGTH];
 
 static int parse_cede_parameters(void)
 {
-	int call_status;
-
 	memset(cede_parameters, 0, CEDE_LATENCY_PARAM_MAX_LENGTH);
-	call_status = rtas_call(rtas_token("ibm,get-system-parameter"), 3, 1,
-				NULL,
-				CEDE_LATENCY_TOKEN,
-				__pa(cede_parameters),
-				CEDE_LATENCY_PARAM_MAX_LENGTH);
-
-	if (call_status != 0)
-		printk(KERN_INFO "CEDE_LATENCY: \
-			%s %s Error calling get-system-parameter(0x%x)\n",
-			__FILE__, __func__, call_status);
-	else
-		printk(KERN_INFO "CEDE_LATENCY: \
-			get-system-parameter successful.\n");
-
-	return call_status;
+	return rtas_call(rtas_token("ibm,get-system-parameter"), 3, 1,
+			 NULL,
+			 CEDE_LATENCY_TOKEN,
+			 __pa(cede_parameters),
+			 CEDE_LATENCY_PARAM_MAX_LENGTH);
 }
 
 static int __init pseries_cpu_hotplug_init(void)

arch/powerpc/platforms/pseries/hvCall_inst.c

@@ -124,8 +124,8 @@ static void probe_hcall_exit(unsigned long opcode, unsigned long retval,
 
 	h = &__get_cpu_var(hcall_stats)[opcode / 4];
 	h->num_calls++;
-	h->tb_total = mftb() - h->tb_start;
-	h->purr_total = mfspr(SPRN_PURR) - h->purr_start;
+	h->tb_total += mftb() - h->tb_start;
+	h->purr_total += mfspr(SPRN_PURR) - h->purr_start;
 
 	put_cpu_var(hcall_stats);
 }

arch/powerpc/platforms/pseries/pci_dlpar.c

@@ -165,7 +165,7 @@ int remove_phb_dynamic(struct pci_controller *phb)
 	struct resource *res;
 	int rc, i;
 
-	pr_debug("PCI: Removing PHB %04x:%02x... \n",
+	pr_debug("PCI: Removing PHB %04x:%02x...\n",
 		 pci_domain_nr(b), b->number);
 
 	/* We cannot to remove a root bus that has children */

arch/powerpc/platforms/pseries/phyp_dump.c

@@ -150,7 +150,7 @@ static void print_dump_header(const struct phyp_dump_header *ph)
 	printk(KERN_INFO "Max auto time= %d\n", ph->maxtime_to_auto);
 
 	/*set cpu state and hpte states as well scratch pad area */
-	printk(KERN_INFO " CPU AREA \n");
+	printk(KERN_INFO " CPU AREA\n");
 	printk(KERN_INFO "cpu dump_flags =%d\n", ph->cpu_data.dump_flags);
 	printk(KERN_INFO "cpu source_type =%d\n", ph->cpu_data.source_type);
 	printk(KERN_INFO "cpu error_flags =%d\n", ph->cpu_data.error_flags);
@@ -161,7 +161,7 @@ static void print_dump_header(const struct phyp_dump_header *ph)
 	printk(KERN_INFO "cpu length_copied =%llx\n",
 		ph->cpu_data.length_copied);
 
-	printk(KERN_INFO " HPTE AREA \n");
+	printk(KERN_INFO " HPTE AREA\n");
 	printk(KERN_INFO "HPTE dump_flags =%d\n", ph->hpte_data.dump_flags);
 	printk(KERN_INFO "HPTE source_type =%d\n", ph->hpte_data.source_type);
 	printk(KERN_INFO "HPTE error_flags =%d\n", ph->hpte_data.error_flags);
@@ -172,7 +172,7 @@ static void print_dump_header(const struct phyp_dump_header *ph)
 	printk(KERN_INFO "HPTE length_copied =%llx\n",
 		ph->hpte_data.length_copied);
 
-	printk(KERN_INFO " SRSD AREA \n");
+	printk(KERN_INFO " SRSD AREA\n");
 	printk(KERN_INFO "SRSD dump_flags =%d\n", ph->kernel_data.dump_flags);
 	printk(KERN_INFO "SRSD source_type =%d\n", ph->kernel_data.source_type);
 	printk(KERN_INFO "SRSD error_flags =%d\n", ph->kernel_data.error_flags);

arch/powerpc/platforms/pseries/smp.c

@@ -144,8 +144,8 @@ static void __devinit smp_pSeries_kick_cpu(int nr)
 		hcpuid = get_hard_smp_processor_id(nr);
 		rc = plpar_hcall_norets(H_PROD, hcpuid);
 		if (rc != H_SUCCESS)
-			printk(KERN_ERR "Error: Prod to wake up processor %d\
-						Ret= %ld\n", nr, rc);
+			printk(KERN_ERR "Error: Prod to wake up processor %d "
+						"Ret= %ld\n", nr, rc);
 	}
 }
 

arch/powerpc/platforms/pseries/xics.c

@@ -127,7 +127,7 @@ static inline unsigned int lpar_xirr_info_get(void)
 
 	lpar_rc = plpar_xirr(&return_value);
 	if (lpar_rc != H_SUCCESS)
-		panic(" bad return code xirr - rc = %lx \n", lpar_rc);
+		panic(" bad return code xirr - rc = %lx\n", lpar_rc);
 	return (unsigned int)return_value;
 }
 
@@ -424,7 +424,7 @@ static int xics_set_affinity(unsigned int virq, const struct cpumask *cpumask)
 }
 
 static struct irq_chip xics_pic_direct = {
-	.name = " XICS     ",
+	.name = "XICS",
 	.startup = xics_startup,
 	.mask = xics_mask_irq,
 	.unmask = xics_unmask_irq,
@@ -433,7 +433,7 @@ static struct irq_chip xics_pic_direct = {
 };
 
 static struct irq_chip xics_pic_lpar = {
-	.name = " XICS     ",
+	.name = "XICS",
 	.startup = xics_startup,
 	.mask = xics_mask_irq,
 	.unmask = xics_unmask_irq,
@@ -510,15 +510,13 @@ static void __init xics_init_host(void)
 /*
  * XICS only has a single IPI, so encode the messages per CPU
  */
-struct xics_ipi_struct {
-        unsigned long value;
-	} ____cacheline_aligned;
-
-static struct xics_ipi_struct xics_ipi_message[NR_CPUS] __cacheline_aligned;
+static DEFINE_PER_CPU_SHARED_ALIGNED(unsigned long, xics_ipi_message);
 
 static inline void smp_xics_do_message(int cpu, int msg)
 {
-	set_bit(msg, &xics_ipi_message[cpu].value);
+	unsigned long *tgt = &per_cpu(xics_ipi_message, cpu);
+
+	set_bit(msg, tgt);
 	mb();
 	if (firmware_has_feature(FW_FEATURE_LPAR))
 		lpar_qirr_info(cpu, IPI_PRIORITY);
@@ -544,25 +542,23 @@ void smp_xics_message_pass(int target, int msg)
 
 static irqreturn_t xics_ipi_dispatch(int cpu)
 {
+	unsigned long *tgt = &per_cpu(xics_ipi_message, cpu);
+
 	WARN_ON(cpu_is_offline(cpu));
 
 	mb();	/* order mmio clearing qirr */
-	while (xics_ipi_message[cpu].value) {
-		if (test_and_clear_bit(PPC_MSG_CALL_FUNCTION,
-				       &xics_ipi_message[cpu].value)) {
+	while (*tgt) {
+		if (test_and_clear_bit(PPC_MSG_CALL_FUNCTION, tgt)) {
 			smp_message_recv(PPC_MSG_CALL_FUNCTION);
 		}
-		if (test_and_clear_bit(PPC_MSG_RESCHEDULE,
-				       &xics_ipi_message[cpu].value)) {
+		if (test_and_clear_bit(PPC_MSG_RESCHEDULE, tgt)) {
 			smp_message_recv(PPC_MSG_RESCHEDULE);
 		}
-		if (test_and_clear_bit(PPC_MSG_CALL_FUNC_SINGLE,
-				       &xics_ipi_message[cpu].value)) {
+		if (test_and_clear_bit(PPC_MSG_CALL_FUNC_SINGLE, tgt)) {
 			smp_message_recv(PPC_MSG_CALL_FUNC_SINGLE);
 		}
 #if defined(CONFIG_DEBUGGER) || defined(CONFIG_KEXEC)
-		if (test_and_clear_bit(PPC_MSG_DEBUGGER_BREAK,
-				       &xics_ipi_message[cpu].value)) {
+		if (test_and_clear_bit(PPC_MSG_DEBUGGER_BREAK, tgt)) {
 			smp_message_recv(PPC_MSG_DEBUGGER_BREAK);
 		}
 #endif

arch/powerpc/sysdev/cpm1.c

@@ -77,7 +77,7 @@ static void cpm_end_irq(unsigned int irq)
 }
 
 static struct irq_chip cpm_pic = {
-	.name = " CPM PIC ",
+	.name = "CPM PIC",
 	.mask = cpm_mask_irq,
 	.unmask = cpm_unmask_irq,
 	.eoi = cpm_end_irq,

arch/powerpc/sysdev/cpm2_pic.c

@@ -198,7 +198,7 @@ err_sense:
 }
 
 static struct irq_chip cpm2_pic = {
-	.name = " CPM2 SIU ",
+	.name = "CPM2 SIU",
 	.mask = cpm2_mask_irq,
 	.unmask = cpm2_unmask_irq,
 	.ack = cpm2_ack,