Merge tag 'soc-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc

SoC related changes for omaps for v3.18 merge window:

- PM changes to make the code easier to use on newer SoCs
- PM changes for newer SoCs suspend and resume and wake-up events
- Minor clean-up to remove dead Kconfig options

Note that these have a dependency to the fixes-v3.18-not-urgent
tag and is based on a commit in that series.

* tag 'soc-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (514 commits)
  ARM: OMAP5+: Reuse OMAP4 PM code for OMAP5 and DRA7
  ARM: dts: OMAP3+: Add PRM interrupt
  ARM: omap: Remove stray ARCH_HAS_OPP references
  ARM: DRA7: Add hook in SoC initcalls to enable pm initialization
  ARM: OMAP5: Add hook in SoC initcalls to enable pm initialization
  ARM: OMAP5 / DRA7: Enable CPU RET on suspend
  ARM: OMAP5 / DRA7: PM: Provide a dummy startup function for CPU hotplug
  ARM: OMAP5 / DRA7: PM: Avoid all SAR saves
  ARM: OMAP5 / DRA7: PM: Enable Mercury retention mode on CPUx powerdomains
  ARM: OMAP5 / DRA7: PM / wakeupgen: Enables ES2 PM mode by default
  ARM: OMAP5 / DRA7: PM: Set MPUSS-EMIF clock-domain static dependency
  ARM: OMAP5 / DRA7: PM: Update CPU context register offset
  ARM: AM437x: use pdata quirks for pinctrl information
  ARM: DRA7: use pdata quirks for pinctrl information
  ARM: OMAP5: use pdata quirks for pinctrl information
  ARM: OMAP4+: PM: Use only valid low power state for CPU hotplug
  ARM: OMAP4+: PM: use only valid low power state for suspend
  ARM: OMAP4+: PM: Make logic state programmable
  ARM: OMAP2+: powerdomain: introduce logic for finding valid power domain
  ARM: OMAP2+: powerdomain: pwrdm_for_each_clkdm iterate only valid clkdms
  ...

Documentation/devicetree/bindings/interrupt-controller/interrupts.txt

@@ -4,11 +4,13 @@ Specifying interrupt information for devices
 1) Interrupt client nodes
 -------------------------
 
-Nodes that describe devices which generate interrupts must contain an either an
-"interrupts" property or an "interrupts-extended" property. These properties
-contain a list of interrupt specifiers, one per output interrupt. The format of
-the interrupt specifier is determined by the interrupt controller to which the
-interrupts are routed; see section 2 below for details.
+Nodes that describe devices which generate interrupts must contain an
+"interrupts" property, an "interrupts-extended" property, or both. If both are
+present, the latter should take precedence; the former may be provided simply
+for compatibility with software that does not recognize the latter. These
+properties contain a list of interrupt specifiers, one per output interrupt. The
+format of the interrupt specifier is determined by the interrupt controller to
+which the interrupts are routed; see section 2 below for details.
 
   Example:
 	interrupt-parent = <&intc1>;

Documentation/devicetree/bindings/mfd/tc3589x.txt

@@ -0,0 +1,107 @@
+* Toshiba TC3589x multi-purpose expander
+
+The Toshiba TC3589x series are I2C-based MFD devices which may expose the
+following built-in devices: gpio, keypad, rotator (vibrator), PWM (for
+e.g. LEDs or vibrators) The included models are:
+
+- TC35890
+- TC35892
+- TC35893
+- TC35894
+- TC35895
+- TC35896
+
+Required properties:
+ - compatible : must be "toshiba,tc35890", "toshiba,tc35892", "toshiba,tc35893",
+   "toshiba,tc35894", "toshiba,tc35895" or "toshiba,tc35896"
+ - reg : I2C address of the device
+ - interrupt-parent : specifies which IRQ controller we're connected to
+ - interrupts : the interrupt on the parent the controller is connected to
+ - interrupt-controller : marks the device node as an interrupt controller
+ - #interrupt-cells : should be <1>, the first cell is the IRQ offset on this
+   TC3589x interrupt controller.
+
+Optional nodes:
+
+- GPIO
+  This GPIO module inside the TC3589x has 24 (TC35890, TC35892) or 20
+  (other models) GPIO lines.
+ - compatible : must be "toshiba,tc3589x-gpio"
+ - interrupts : interrupt on the parent, which must be the tc3589x MFD device
+ - interrupt-controller : marks the device node as an interrupt controller
+ - #interrupt-cells : should be <2>, the first cell is the IRQ offset on this
+   TC3589x GPIO interrupt controller, the second cell is the interrupt flags
+   in accordance with <dt-bindings/interrupt-controller/irq.h>. The following
+   flags are valid:
+   - IRQ_TYPE_LEVEL_LOW
+   - IRQ_TYPE_LEVEL_HIGH
+   - IRQ_TYPE_EDGE_RISING
+   - IRQ_TYPE_EDGE_FALLING
+   - IRQ_TYPE_EDGE_BOTH
+ - gpio-controller : marks the device node as a GPIO controller
+ - #gpio-cells : should be <2>, the first cell is the GPIO offset on this
+   GPIO controller, the second cell is the flags.
+
+- Keypad
+  This keypad is the same on all variants, supporting up to 96 different
+  keys. The linux-specific properties are modeled on those already existing
+  in other input drivers.
+ - compatible : must be "toshiba,tc3589x-keypad"
+ - debounce-delay-ms : debounce interval in milliseconds
+ - keypad,num-rows : number of rows in the matrix, see
+   bindings/input/matrix-keymap.txt
+ - keypad,num-columns : number of columns in the matrix, see
+   bindings/input/matrix-keymap.txt
+ - linux,keymap: the definition can be found in
+   bindings/input/matrix-keymap.txt
+ - linux,no-autorepeat: do no enable autorepeat feature.
+ - linux,wakeup: use any event on keypad as wakeup event.
+
+Example:
+
+tc35893@44 {
+	compatible = "toshiba,tc35893";
+	reg = <0x44>;
+	interrupt-parent = <&gpio6>;
+	interrupts = <26 IRQ_TYPE_EDGE_RISING>;
+
+	interrupt-controller;
+	#interrupt-cells = <1>;
+
+	tc3589x_gpio {
+		compatible = "toshiba,tc3589x-gpio";
+		interrupts = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+	tc3589x_keypad {
+		compatible = "toshiba,tc3589x-keypad";
+		interrupts = <6>;
+		debounce-delay-ms = <4>;
+		keypad,num-columns = <8>;
+		keypad,num-rows = <8>;
+		linux,no-autorepeat;
+		linux,wakeup;
+		linux,keymap = <0x0301006b
+				0x04010066
+				0x06040072
+				0x040200d7
+				0x0303006a
+				0x0205000e
+				0x0607008b
+				0x0500001c
+				0x0403000b
+				0x03040034
+				0x05020067
+				0x0305006c
+				0x040500e7
+				0x0005009e
+				0x06020073
+				0x01030039
+				0x07060069
+				0x050500d9>;
+	};
+};

Documentation/devicetree/bindings/mtd/gpmc-nand.txt

@@ -22,7 +22,7 @@ Optional properties:
 				width of 8 is assumed.
 
  - ti,nand-ecc-opt:		A string setting the ECC layout to use. One of:
-		"sw"		<deprecated> use "ham1" instead
+		"sw"		1-bit Hamming ecc code via software
 		"hw"		<deprecated> use "ham1" instead
 		"hw-romcode"	<deprecated> use "ham1" instead
 		"ham1"		1-bit Hamming ecc code

Documentation/devicetree/bindings/pci/designware-pcie.txt

@@ -2,6 +2,10 @@
 
 Required properties:
 - compatible: should contain "snps,dw-pcie" to identify the core.
+- reg: Should contain the configuration address space.
+- reg-names: Must be "config" for the PCIe configuration space.
+    (The old way of getting the configuration address space from "ranges"
+    is deprecated and should be avoided.)
 - #address-cells: set to <3>
 - #size-cells: set to <2>
 - device_type: set to "pci"

Documentation/devicetree/bindings/pci/ti-pci.txt

@@ -0,0 +1,59 @@
+TI PCI Controllers
+
+PCIe Designware Controller
+ - compatible: Should be "ti,dra7-pcie""
+ - reg : Two register ranges as listed in the reg-names property
+ - reg-names : The first entry must be "ti-conf" for the TI specific registers
+	       The second entry must be "rc-dbics" for the designware pcie
+	       registers
+	       The third entry must be "config" for the PCIe configuration space
+ - phys : list of PHY specifiers (used by generic PHY framework)
+ - phy-names : must be "pcie-phy0", "pcie-phy1", "pcie-phyN".. based on the
+	       number of PHYs as specified in *phys* property.
+ - ti,hwmods : Name of the hwmod associated to the pcie, "pcie<X>",
+	       where <X> is the instance number of the pcie from the HW spec.
+ - interrupts : Two interrupt entries must be specified. The first one is for
+		main interrupt line and the second for MSI interrupt line.
+ - #address-cells,
+   #size-cells,
+   #interrupt-cells,
+   device_type,
+   ranges,
+   num-lanes,
+   interrupt-map-mask,
+   interrupt-map : as specified in ../designware-pcie.txt
+
+Example:
+axi {
+	compatible = "simple-bus";
+	#size-cells = <1>;
+	#address-cells = <1>;
+	ranges = <0x51000000 0x51000000 0x3000
+		  0x0	     0x20000000 0x10000000>;
+	pcie@51000000 {
+		compatible = "ti,dra7-pcie";
+		reg = <0x51000000 0x2000>, <0x51002000 0x14c>, <0x1000 0x2000>;
+		reg-names = "rc_dbics", "ti_conf", "config";
+		interrupts = <0 232 0x4>, <0 233 0x4>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+		ranges = <0x81000000 0 0          0x03000 0 0x00010000
+			  0x82000000 0 0x20013000 0x13000 0 0xffed000>;
+		#interrupt-cells = <1>;
+		num-lanes = <1>;
+		ti,hwmods = "pcie1";
+		phys = <&pcie1_phy>;
+		phy-names = "pcie-phy0";
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie_intc 1>,
+				<0 0 0 2 &pcie_intc 2>,
+				<0 0 0 3 &pcie_intc 3>,
+				<0 0 0 4 &pcie_intc 4>;
+		pcie_intc: interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+		};
+	};
+};

Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt

@@ -62,7 +62,7 @@ Example:
 		#gpio-cells = <2>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
-		interrupts = <0 32 0x4>;
+		interrupts = <0 16 0x4>;
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&gsbi5_uart_default>;

Documentation/dma-buf-sharing.txt

@@ -56,10 +56,10 @@ The dma_buf buffer sharing API usage contains the following steps:
 				     size_t size, int flags,
 				     const char *exp_name)
 
-   If this succeeds, dma_buf_export allocates a dma_buf structure, and returns a
-   pointer to the same. It also associates an anonymous file with this buffer,
-   so it can be exported. On failure to allocate the dma_buf object, it returns
-   NULL.
+   If this succeeds, dma_buf_export_named allocates a dma_buf structure, and
+   returns a pointer to the same. It also associates an anonymous file with this
+   buffer, so it can be exported. On failure to allocate the dma_buf object,
+   it returns NULL.
 
    'exp_name' is the name of exporter - to facilitate information while
    debugging.
@@ -76,7 +76,7 @@ The dma_buf buffer sharing API usage contains the following steps:
    drivers and/or processes.
 
    Interface:
-      int dma_buf_fd(struct dma_buf *dmabuf)
+      int dma_buf_fd(struct dma_buf *dmabuf, int flags)
 
    This API installs an fd for the anonymous file associated with this buffer;
    returns either 'fd', or error.
@@ -157,7 +157,9 @@ to request use of buffer for allocation.
    "dma_buf->ops->" indirection from the users of this interface.
 
    In struct dma_buf_ops, unmap_dma_buf is defined as
-      void (*unmap_dma_buf)(struct dma_buf_attachment *, struct sg_table *);
+      void (*unmap_dma_buf)(struct dma_buf_attachment *,
+                            struct sg_table *,
+                            enum dma_data_direction);
 
    unmap_dma_buf signifies the end-of-DMA for the attachment provided. Like
    map_dma_buf, this API also must be implemented by the exporter.

Documentation/kdump/kdump.txt

@@ -18,7 +18,7 @@ memory image to a dump file on the local disk, or across the network to
 a remote system.
 
 Kdump and kexec are currently supported on the x86, x86_64, ppc64, ia64,
-and s390x architectures.
+s390x and arm architectures.
 
 When the system kernel boots, it reserves a small section of memory for
 the dump-capture kernel. This ensures that ongoing Direct Memory Access
@@ -112,7 +112,7 @@ There are two possible methods of using Kdump.
 2) Or use the system kernel binary itself as dump-capture kernel and there is
    no need to build a separate dump-capture kernel. This is possible
    only with the architectures which support a relocatable kernel. As
-   of today, i386, x86_64, ppc64 and ia64 architectures support relocatable
+   of today, i386, x86_64, ppc64, ia64 and arm architectures support relocatable
    kernel.
 
 Building a relocatable kernel is advantageous from the point of view that
@@ -241,6 +241,13 @@ Dump-capture kernel config options (Arch Dependent, ia64)
   kernel will be aligned to 64Mb, so if the start address is not then
   any space below the alignment point will be wasted.
 
+Dump-capture kernel config options (Arch Dependent, arm)
+----------------------------------------------------------
+
+-   To use a relocatable kernel,
+    Enable "AUTO_ZRELADDR" support under "Boot" options:
+
+    AUTO_ZRELADDR=y
 
 Extended crashkernel syntax
 ===========================
@@ -256,6 +263,10 @@ The syntax is:
     crashkernel=<range1>:<size1>[,<range2>:<size2>,...][@offset]
     range=start-[end]
 
+Please note, on arm, the offset is required.
+    crashkernel=<range1>:<size1>[,<range2>:<size2>,...]@offset
+    range=start-[end]
+
     'start' is inclusive and 'end' is exclusive.
 
 For example:
@@ -296,6 +307,12 @@ Boot into System Kernel
    on the memory consumption of the kdump system. In general this is not
    dependent on the memory size of the production system.
 
+   On arm, use "crashkernel=Y@X". Note that the start address of the kernel
+   will be aligned to 128MiB (0x08000000), so if the start address is not then
+   any space below the alignment point may be overwritten by the dump-capture kernel,
+   which means it is possible that the vmcore is not that precise as expected.
+
+
 Load the Dump-capture Kernel
 ============================
 
@@ -315,7 +332,8 @@ For ia64:
 	- Use vmlinux or vmlinuz.gz
 For s390x:
 	- Use image or bzImage
-
+For arm:
+	- Use zImage
 
 If you are using a uncompressed vmlinux image then use following command
 to load dump-capture kernel.
@@ -331,6 +349,15 @@ to load dump-capture kernel.
    --initrd=<initrd-for-dump-capture-kernel> \
    --append="root=<root-dev> <arch-specific-options>"
 
+If you are using a compressed zImage, then use following command
+to load dump-capture kernel.
+
+   kexec --type zImage -p <dump-capture-kernel-bzImage> \
+   --initrd=<initrd-for-dump-capture-kernel> \
+   --dtb=<dtb-for-dump-capture-kernel> \
+   --append="root=<root-dev> <arch-specific-options>"
+
+
 Please note, that --args-linux does not need to be specified for ia64.
 It is planned to make this a no-op on that architecture, but for now
 it should be omitted
@@ -347,6 +374,9 @@ For ppc64:
 For s390x:
 	"1 maxcpus=1 cgroup_disable=memory"
 
+For arm:
+	"1 maxcpus=1 reset_devices"
+
 Notes on loading the dump-capture kernel:
 
 * By default, the ELF headers are stored in ELF64 format to support

Documentation/this_cpu_ops.txt

@@ -2,26 +2,26 @@ this_cpu operations
 -------------------
 
 this_cpu operations are a way of optimizing access to per cpu
-variables associated with the *currently* executing processor through
-the use of segment registers (or a dedicated register where the cpu
-permanently stored the beginning of the per cpu area for a specific
-processor).
+variables associated with the *currently* executing processor. This is
+done through the use of segment registers (or a dedicated register where
+the cpu permanently stored the beginning of the per cpu	area for a
+specific processor).
 
-The this_cpu operations add a per cpu variable offset to the processor
-specific percpu base and encode that operation in the instruction
+this_cpu operations add a per cpu variable offset to the processor
+specific per cpu base and encode that operation in the instruction
 operating on the per cpu variable.
 
-This means there are no atomicity issues between the calculation of
+This means that there are no atomicity issues between the calculation of
 the offset and the operation on the data. Therefore it is not
-necessary to disable preempt or interrupts to ensure that the
+necessary to disable preemption or interrupts to ensure that the
 processor is not changed between the calculation of the address and
 the operation on the data.
 
 Read-modify-write operations are of particular interest. Frequently
 processors have special lower latency instructions that can operate
-without the typical synchronization overhead but still provide some
-sort of relaxed atomicity guarantee. The x86 for example can execute
-RMV (Read Modify Write) instructions like inc/dec/cmpxchg without the
+without the typical synchronization overhead, but still provide some
+sort of relaxed atomicity guarantees. The x86, for example, can execute
+RMW (Read Modify Write) instructions like inc/dec/cmpxchg without the
 lock prefix and the associated latency penalty.
 
 Access to the variable without the lock prefix is not synchronized but
@@ -30,6 +30,38 @@ data specific to the currently executing processor. Only the current
 processor should be accessing that variable and therefore there are no
 concurrency issues with other processors in the system.
 
+Please note that accesses by remote processors to a per cpu area are
+exceptional situations and may impact performance and/or correctness
+(remote write operations) of local RMW operations via this_cpu_*.
+
+The main use of the this_cpu operations has been to optimize counter
+operations.
+
+The following this_cpu() operations with implied preemption protection
+are defined. These operations can be used without worrying about
+preemption and interrupts.
+
+	this_cpu_add()
+	this_cpu_read(pcp)
+	this_cpu_write(pcp, val)
+	this_cpu_add(pcp, val)
+	this_cpu_and(pcp, val)
+	this_cpu_or(pcp, val)
+	this_cpu_add_return(pcp, val)
+	this_cpu_xchg(pcp, nval)
+	this_cpu_cmpxchg(pcp, oval, nval)
+	this_cpu_cmpxchg_double(pcp1, pcp2, oval1, oval2, nval1, nval2)
+	this_cpu_sub(pcp, val)
+	this_cpu_inc(pcp)
+	this_cpu_dec(pcp)
+	this_cpu_sub_return(pcp, val)
+	this_cpu_inc_return(pcp)
+	this_cpu_dec_return(pcp)
+
+
+Inner working of this_cpu operations
+------------------------------------
+
 On x86 the fs: or the gs: segment registers contain the base of the
 per cpu area. It is then possible to simply use the segment override
 to relocate a per cpu relative address to the proper per cpu area for
@@ -48,22 +80,21 @@ results in a single instruction
 	mov ax, gs:[x]
 
 instead of a sequence of calculation of the address and then a fetch
-from that address which occurs with the percpu operations. Before
+from that address which occurs with the per cpu operations. Before
 this_cpu_ops such sequence also required preempt disable/enable to
 prevent the kernel from moving the thread to a different processor
 while the calculation is performed.
 
-The main use of the this_cpu operations has been to optimize counter
-operations.
+Consider the following this_cpu operation:
 
 	this_cpu_inc(x)
 
-results in the following single instruction (no lock prefix!)
+The above results in the following single instruction (no lock prefix!)
 
 	inc gs:[x]
 
 instead of the following operations required if there is no segment
-register.
+register:
 
 	int *y;
 	int cpu;
@@ -73,10 +104,10 @@ register.
 	(*y)++;
 	put_cpu();
 
-Note that these operations can only be used on percpu data that is
+Note that these operations can only be used on per cpu data that is
 reserved for a specific processor. Without disabling preemption in the
 surrounding code this_cpu_inc() will only guarantee that one of the
-percpu counters is correctly incremented. However, there is no
+per cpu counters is correctly incremented. However, there is no
 guarantee that the OS will not move the process directly before or
 after the this_cpu instruction is executed. In general this means that
 the value of the individual counters for each processor are
@@ -86,9 +117,9 @@ that is of interest.
 Per cpu variables are used for performance reasons. Bouncing cache
 lines can be avoided if multiple processors concurrently go through
 the same code paths.  Since each processor has its own per cpu
-variables no concurrent cacheline updates take place. The price that
+variables no concurrent cache line updates take place. The price that
 has to be paid for this optimization is the need to add up the per cpu
-counters when the value of the counter is needed.
+counters when the value of a counter is needed.
 
 
 Special operations:
@@ -100,33 +131,39 @@ Takes the offset of a per cpu variable (&x !) and returns the address
 of the per cpu variable that belongs to the currently executing
 processor.  this_cpu_ptr avoids multiple steps that the common
 get_cpu/put_cpu sequence requires. No processor number is
-available. Instead the offset of the local per cpu area is simply
-added to the percpu offset.
+available. Instead, the offset of the local per cpu area is simply
+added to the per cpu offset.
 
+Note that this operation is usually used in a code segment when
+preemption has been disabled. The pointer is then used to
+access local per cpu data in a critical section. When preemption
+is re-enabled this pointer is usually no longer useful since it may
+no longer point to per cpu data of the current processor.
 
 
 Per cpu variables and offsets
 -----------------------------
 
-Per cpu variables have *offsets* to the beginning of the percpu
+Per cpu variables have *offsets* to the beginning of the per cpu
 area. They do not have addresses although they look like that in the
 code. Offsets cannot be directly dereferenced. The offset must be
-added to a base pointer of a percpu area of a processor in order to
+added to a base pointer of a per cpu area of a processor in order to
 form a valid address.
 
 Therefore the use of x or &x outside of the context of per cpu
 operations is invalid and will generally be treated like a NULL
 pointer dereference.
 
-In the context of per cpu operations
+	DEFINE_PER_CPU(int, x);
 
-	x is a per cpu variable. Most this_cpu operations take a cpu
-	variable.
+In the context of per cpu operations the above implies that x is a per
+cpu variable. Most this_cpu operations take a cpu variable.
 
-	&x is the *offset* a per cpu variable. this_cpu_ptr() takes
-	the offset of a per cpu variable which makes this look a bit
-	strange.
+	int __percpu *p = &x;
 
+&x and hence p is the *offset* of a per cpu variable. this_cpu_ptr()
+takes the offset of a per cpu variable which makes this look a bit
+strange.
 
 
 Operations on a field of a per cpu structure
@@ -152,7 +189,7 @@ If we have an offset to struct s:
 
 	struct s __percpu *ps = &p;
 
-	z = this_cpu_dec(ps->m);
+	this_cpu_dec(ps->m);
 
 	z = this_cpu_inc_return(ps->n);
 
@@ -172,29 +209,52 @@ if we do not make use of this_cpu ops later to manipulate fields:
 Variants of this_cpu ops
 -------------------------
 
-this_cpu ops are interrupt safe. Some architecture do not support
+this_cpu ops are interrupt safe. Some architectures do not support
 these per cpu local operations. In that case the operation must be
 replaced by code that disables interrupts, then does the operations
-that are guaranteed to be atomic and then reenable interrupts. Doing
+that are guaranteed to be atomic and then re-enable interrupts. Doing
 so is expensive. If there are other reasons why the scheduler cannot
 change the processor we are executing on then there is no reason to
-disable interrupts. For that purpose the __this_cpu operations are
-provided. For example.
-
-	__this_cpu_inc(x);
-
-Will increment x and will not fallback to code that disables
+disable interrupts. For that purpose the following __this_cpu operations
+are provided.
+
+These operations have no guarantee against concurrent interrupts or
+preemption. If a per cpu variable is not used in an interrupt context
+and the scheduler cannot preempt, then they are safe. If any interrupts
+still occur while an operation is in progress and if the interrupt too
+modifies the variable, then RMW actions can not be guaranteed to be
+safe.
+
+	__this_cpu_add()
+	__this_cpu_read(pcp)
+	__this_cpu_write(pcp, val)
+	__this_cpu_add(pcp, val)
+	__this_cpu_and(pcp, val)
+	__this_cpu_or(pcp, val)
+	__this_cpu_add_return(pcp, val)
+	__this_cpu_xchg(pcp, nval)
+	__this_cpu_cmpxchg(pcp, oval, nval)
+	__this_cpu_cmpxchg_double(pcp1, pcp2, oval1, oval2, nval1, nval2)
+	__this_cpu_sub(pcp, val)
+	__this_cpu_inc(pcp)
+	__this_cpu_dec(pcp)
+	__this_cpu_sub_return(pcp, val)
+	__this_cpu_inc_return(pcp)
+	__this_cpu_dec_return(pcp)
+
+
+Will increment x and will not fall-back to code that disables
 interrupts on platforms that cannot accomplish atomicity through
 address relocation and a Read-Modify-Write operation in the same
 instruction.
 
 
-
 &this_cpu_ptr(pp)->n vs this_cpu_ptr(&pp->n)
 --------------------------------------------
 
 The first operation takes the offset and forms an address and then
-adds the offset of the n field.
+adds the offset of the n field. This may result in two add
+instructions emitted by the compiler.
 
 The second one first adds the two offsets and then does the
 relocation.  IMHO the second form looks cleaner and has an easier time
@@ -202,4 +262,73 @@ with (). The second form also is consistent with the way
 this_cpu_read() and friends are used.
 
 
-Christoph Lameter, April 3rd, 2013
+Remote access to per cpu data
+------------------------------
+
+Per cpu data structures are designed to be used by one cpu exclusively.
+If you use the variables as intended, this_cpu_ops() are guaranteed to
+be "atomic" as no other CPU has access to these data structures.
+
+There are special cases where you might need to access per cpu data
+structures remotely. It is usually safe to do a remote read access
+and that is frequently done to summarize counters. Remote write access
+something which could be problematic because this_cpu ops do not
+have lock semantics. A remote write may interfere with a this_cpu
+RMW operation.
+
+Remote write accesses to percpu data structures are highly discouraged
+unless absolutely necessary. Please consider using an IPI to wake up
+the remote CPU and perform the update to its per cpu area.
+
+To access per-cpu data structure remotely, typically the per_cpu_ptr()
+function is used:
+
+
+	DEFINE_PER_CPU(struct data, datap);
+
+	struct data *p = per_cpu_ptr(&datap, cpu);
+
+This makes it explicit that we are getting ready to access a percpu
+area remotely.
+
+You can also do the following to convert the datap offset to an address
+
+	struct data *p = this_cpu_ptr(&datap);
+
+but, passing of pointers calculated via this_cpu_ptr to other cpus is
+unusual and should be avoided.
+
+Remote access are typically only for reading the status of another cpus
+per cpu data. Write accesses can cause unique problems due to the
+relaxed synchronization requirements for this_cpu operations.
+
+One example that illustrates some concerns with write operations is
+the following scenario that occurs because two per cpu variables
+share a cache-line but the relaxed synchronization is applied to
+only one process updating the cache-line.
+
+Consider the following example
+
+
+	struct test {
+		atomic_t a;
+		int b;
+	};
+
+	DEFINE_PER_CPU(struct test, onecacheline);
+
+There is some concern about what would happen if the field 'a' is updated
+remotely from one processor and the local processor would use this_cpu ops
+to update field b. Care should be taken that such simultaneous accesses to
+data within the same cache line are avoided. Also costly synchronization
+may be necessary. IPIs are generally recommended in such scenarios instead
+of a remote write to the per cpu area of another processor.
+
+Even in cases where the remote writes are rare, please bear in
+mind that a remote write will evict the cache line from the processor
+that most likely will access it. If the processor wakes up and finds a
+missing local cache line of a per cpu area, its performance and hence
+the wake up times will be affected.
+
+Christoph Lameter, August 4th, 2014
+Pranith Kumar, Aug 2nd, 2014

Documentation/x86/tlb.txt

@@ -35,7 +35,7 @@ invlpg instruction (or instructions _near_ it) show up high in
 profiles.  If you believe that individual invalidations being
 called too often, you can lower the tunable:
 
-	/sys/debug/kernel/x86/tlb_single_page_flush_ceiling
+	/sys/kernel/debug/x86/tlb_single_page_flush_ceiling
 
 This will cause us to do the global flush for more cases.
 Lowering it to 0 will disable the use of the individual flushes.

MAINTAINERS

@@ -1277,9 +1277,15 @@ F:	drivers/scsi/arm/
 ARM/Rockchip SoC support
 M:	Heiko Stuebner <heiko@sntech.de>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+L:	linux-rockchip@lists.infradead.org
 S:	Maintained
+F:	arch/arm/boot/dts/rk3*
 F:	arch/arm/mach-rockchip/
+F:	drivers/clk/rockchip/
+F:	drivers/i2c/busses/i2c-rk3x.c
 F:	drivers/*/*rockchip*
+F:	drivers/*/*/*rockchip*
+F:	sound/soc/rockchip/
 
 ARM/SAMSUNG ARM ARCHITECTURES
 M:	Ben Dooks <ben-linux@fluff.org>
@@ -1843,6 +1849,12 @@ S:	Orphan
 F:	Documentation/filesystems/befs.txt
 F:	fs/befs/
 
+BECKHOFF CX5020 ETHERCAT MASTER DRIVER
+M: Dariusz Marcinkiewicz <reksio@newterm.pl>
+L: netdev@vger.kernel.org
+S: Maintained
+F: drivers/net/ethernet/ec_bhf.c
+
 BFS FILE SYSTEM
 M:	"Tigran A. Aivazian" <tigran@aivazian.fsnet.co.uk>
 S:	Maintained
@@ -2059,7 +2071,7 @@ S:	Supported
 F:	drivers/scsi/bnx2i/
 
 BROADCOM KONA GPIO DRIVER
-M:	Markus Mayer <markus.mayer@linaro.org>
+M:	Ray Jui <rjui@broadcom.com>
 L:	bcm-kernel-feedback-list@broadcom.com
 S:	Supported
 F:	drivers/gpio/gpio-bcm-kona.c
@@ -3115,6 +3127,17 @@ F:	include/linux/host1x.h
 F:	include/uapi/drm/tegra_drm.h
 F:	Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt
 
+DRM DRIVERS FOR RENESAS
+M:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+L:	dri-devel@lists.freedesktop.org
+L:	linux-sh@vger.kernel.org
+T:	git git://people.freedesktop.org/~airlied/linux
+S:	Supported
+F:	drivers/gpu/drm/rcar-du/
+F:	drivers/gpu/drm/shmobile/
+F:	include/linux/platform_data/rcar-du.h
+F:	include/linux/platform_data/shmob_drm.h
+
 DSBR100 USB FM RADIO DRIVER
 M:	Alexey Klimov <klimov.linux@gmail.com>
 L:	linux-media@vger.kernel.org
@@ -3843,10 +3866,13 @@ F:	drivers/tty/serial/ucc_uart.c
 
 FREESCALE SOC SOUND DRIVERS
 M:	Timur Tabi <timur@tabi.org>
+M:	Nicolin Chen <nicoleotsuka@gmail.com>
+M:	Xiubo Li <Li.Xiubo@freescale.com>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 L:	linuxppc-dev@lists.ozlabs.org
 S:	Maintained
 F:	sound/soc/fsl/fsl*
+F:	sound/soc/fsl/imx*
 F:	sound/soc/fsl/mpc8610_hpcd.c
 
 FREEVXFS FILESYSTEM
@@ -4446,6 +4472,13 @@ F:	include/linux/i2c-*.h
 F:	include/uapi/linux/i2c.h
 F:	include/uapi/linux/i2c-*.h
 
+I2C ACPI SUPPORT
+M:	Mika Westerberg <mika.westerberg@linux.intel.com>
+L:	linux-i2c@vger.kernel.org
+L:	linux-acpi@vger.kernel.org
+S:	Maintained
+F:	drivers/i2c/i2c-acpi.c
+
 I2C-TAOS-EVM DRIVER
 M:	Jean Delvare <jdelvare@suse.de>
 L:	linux-i2c@vger.kernel.org
@@ -5972,6 +6005,12 @@ T:	git git://linuxtv.org/media_tree.git
 S:	Maintained
 F:	drivers/media/radio/radio-mr800.c
 
+MRF24J40 IEEE 802.15.4 RADIO DRIVER
+M:	Alan Ott <alan@signal11.us>
+L:	linux-wpan@vger.kernel.org
+S:	Maintained
+F:	drivers/net/ieee802154/mrf24j40.c
+
 MSI LAPTOP SUPPORT
 M:	"Lee, Chun-Yi" <jlee@suse.com>
 L:	platform-driver-x86@vger.kernel.org
@@ -6858,6 +6897,14 @@ S:	Supported
 F:	Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
 F:	drivers/pci/host/pci-tegra.c
 
+PCI DRIVER FOR TI DRA7XX
+M:	Kishon Vijay Abraham I <kishon@ti.com>
+L:	linux-omap@vger.kernel.org
+L:	linux-pci@vger.kernel.org
+S:	Supported
+F:	Documentation/devicetree/bindings/pci/ti-pci.txt
+F:	drivers/pci/host/pci-dra7xx.c
+
 PCI DRIVER FOR RENESAS R-CAR
 M:	Simon Horman <horms@verge.net.au>
 L:	linux-pci@vger.kernel.org
@@ -9515,6 +9562,14 @@ S:	Maintained
 F:	Documentation/usb/ohci.txt
 F:	drivers/usb/host/ohci*
 
+USB OVER IP DRIVER
+M:	Valentina Manea <valentina.manea.m@gmail.com>
+M:	Shuah Khan <shuah.kh@samsung.com>
+L:	linux-usb@vger.kernel.org
+S:	Maintained
+F:	drivers/usb/usbip/
+F:	tools/usb/usbip/
+
 USB PEGASUS DRIVER
 M:	Petko Manolov <petkan@nucleusys.com>
 L:	linux-usb@vger.kernel.org

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 17
 SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc3
 NAME = Shuffling Zombie Juror
 
 # *DOCUMENTATION*

arch/alpha/include/asm/io.h

@@ -500,10 +500,14 @@ extern inline void writeq(u64 b, volatile void __iomem *addr)
 #define outb_p		outb
 #define outw_p		outw
 #define outl_p		outl
-#define readb_relaxed(addr) __raw_readb(addr)
-#define readw_relaxed(addr) __raw_readw(addr)
-#define readl_relaxed(addr) __raw_readl(addr)
-#define readq_relaxed(addr) __raw_readq(addr)
+#define readb_relaxed(addr)	__raw_readb(addr)
+#define readw_relaxed(addr)	__raw_readw(addr)
+#define readl_relaxed(addr)	__raw_readl(addr)
+#define readq_relaxed(addr)	__raw_readq(addr)
+#define writeb_relaxed(b, addr)	__raw_writeb(b, addr)
+#define writew_relaxed(b, addr)	__raw_writew(b, addr)
+#define writel_relaxed(b, addr)	__raw_writel(b, addr)
+#define writeq_relaxed(b, addr)	__raw_writeq(b, addr)
 
 #define mmiowb()
 

arch/alpha/include/asm/unistd.h

@@ -3,7 +3,7 @@
 
 #include <uapi/asm/unistd.h>
 
-#define NR_SYSCALLS			508
+#define NR_SYSCALLS			511
 
 #define __ARCH_WANT_OLD_READDIR
 #define __ARCH_WANT_STAT64

arch/alpha/include/uapi/asm/unistd.h

@@ -469,5 +469,8 @@
 #define __NR_process_vm_writev		505
 #define __NR_kcmp			506
 #define __NR_finit_module		507
+#define __NR_sched_setattr		508
+#define __NR_sched_getattr		509
+#define __NR_renameat2			510
 
 #endif /* _UAPI_ALPHA_UNISTD_H */

arch/alpha/kernel/systbls.S

@@ -526,6 +526,9 @@ sys_call_table:
 	.quad sys_process_vm_writev		/* 505 */
 	.quad sys_kcmp
 	.quad sys_finit_module
+	.quad sys_sched_setattr
+	.quad sys_sched_getattr
+	.quad sys_renameat2			/* 510 */
 
 	.size sys_call_table, . - sys_call_table
 	.type sys_call_table, @object

arch/arc/mm/cache_arc700.c

@@ -581,6 +581,7 @@ void flush_icache_range(unsigned long kstart, unsigned long kend)
 		tot_sz -= sz;
 	}
 }
+EXPORT_SYMBOL(flush_icache_range);
 
 /*
  * General purpose helper to make I and D cache lines consistent.

arch/arm/Kconfig

@@ -1984,8 +1984,6 @@ config XIP_PHYS_ADDR
 config KEXEC
 	bool "Kexec system call (EXPERIMENTAL)"
 	depends on (!SMP || PM_SLEEP_SMP)
-	select CRYPTO
-	select CRYPTO_SHA256
 	help
 	  kexec is a system call that implements the ability to shutdown your
 	  current kernel, and to start another kernel.  It is like a reboot

arch/arm/boot/dts/am335x-bone-common.dtsi

@@ -7,9 +7,6 @@
  */
 
 / {
-	model = "TI AM335x BeagleBone";
-	compatible = "ti,am335x-bone", "ti,am33xx";
-
 	cpus {
 		cpu@0 {
 			cpu0-supply = <&dcdc2_reg>;

arch/arm/boot/dts/am335x-bone.dts

@@ -10,6 +10,11 @@
 #include "am33xx.dtsi"
 #include "am335x-bone-common.dtsi"
 
+/ {
+	model = "TI AM335x BeagleBone";
+	compatible = "ti,am335x-bone", "ti,am33xx";
+};
+
 &ldo3_reg {
 	regulator-min-microvolt = <1800000>;
 	regulator-max-microvolt = <3300000>;

arch/arm/boot/dts/am335x-boneblack.dts

@@ -10,6 +10,11 @@
 #include "am33xx.dtsi"
 #include "am335x-bone-common.dtsi"
 
+/ {
+	model = "TI AM335x BeagleBone Black";
+	compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";
+};
+
 &ldo3_reg {
 	regulator-min-microvolt = <1800000>;
 	regulator-max-microvolt = <1800000>;

arch/arm/boot/dts/dra7.dtsi

@@ -89,6 +89,7 @@
 		prm: prm@4ae06000 {
 			compatible = "ti,dra7-prm";
 			reg = <0x4ae06000 0x3000>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
 
 			prm_clocks: clocks {
 				#address-cells = <1>;
@@ -245,7 +246,7 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
-			#interrupt-cells = <1>;
+			#interrupt-cells = <2>;
 		};
 
 		gpio2: gpio@48055000 {
@@ -256,7 +257,7 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
-			#interrupt-cells = <1>;
+			#interrupt-cells = <2>;
 		};
 
 		gpio3: gpio@48057000 {
@@ -267,7 +268,7 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
-			#interrupt-cells = <1>;
+			#interrupt-cells = <2>;
 		};
 
 		gpio4: gpio@48059000 {
@@ -278,7 +279,7 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
-			#interrupt-cells = <1>;
+			#interrupt-cells = <2>;
 		};
 
 		gpio5: gpio@4805b000 {
@@ -289,7 +290,7 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
-			#interrupt-cells = <1>;
+			#interrupt-cells = <2>;
 		};
 
 		gpio6: gpio@4805d000 {
@@ -300,7 +301,7 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
-			#interrupt-cells = <1>;
+			#interrupt-cells = <2>;
 		};
 
 		gpio7: gpio@48051000 {
@@ -311,7 +312,7 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
-			#interrupt-cells = <1>;
+			#interrupt-cells = <2>;
 		};
 
 		gpio8: gpio@48053000 {
@@ -322,7 +323,7 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
-			#interrupt-cells = <1>;
+			#interrupt-cells = <2>;
 		};
 
 		uart1: serial@4806a000 {

arch/arm/boot/dts/exynos4412-odroid-common.dtsi

@@ -134,6 +134,8 @@
 	i2c@13860000 {
 		pinctrl-0 = <&i2c0_bus>;
 		pinctrl-names = "default";
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-max-bus-freq = <400000>;
 		status = "okay";
 
 		usb3503: usb3503@08 {
@@ -148,6 +150,10 @@
 
 		max77686: pmic@09 {
 			compatible = "maxim,max77686";
+			interrupt-parent = <&gpx3>;
+			interrupts = <2 0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&max77686_irq>;
 			reg = <0x09>;
 			#clock-cells = <1>;
 
@@ -368,4 +374,11 @@
 		samsung,pins = "gpx1-3";
 		samsung,pin-pud = <0>;
 	};
+
+	max77686_irq: max77686-irq {
+		samsung,pins = "gpx3-2";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
 };

arch/arm/boot/dts/imx53-qsrb.dts

@@ -28,6 +28,12 @@
 				MX53_PAD_CSI0_DAT9__I2C1_SCL      0x400001ec
 			>;
 		};
+
+		pinctrl_pmic: pmicgrp {
+			fsl,pins = <
+				MX53_PAD_CSI0_DAT5__GPIO5_23	0x1e4 /* IRQ */
+			>;
+		};
 	};
 };
 
@@ -38,6 +44,8 @@
 
 	pmic: mc34708@8 {
 		compatible = "fsl,mc34708";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
 		reg = <0x08>;
 		interrupt-parent = <&gpio5>;
 		interrupts = <23 0x8>;

arch/arm/boot/dts/imx53.dtsi

@@ -731,7 +731,7 @@
 				compatible = "fsl,imx53-vpu";
 				reg = <0x63ff4000 0x1000>;
 				interrupts = <9>;
-				clocks = <&clks IMX5_CLK_VPU_GATE>,
+				clocks = <&clks IMX5_CLK_VPU_REFERENCE_GATE>,
 				         <&clks IMX5_CLK_VPU_GATE>;
 				clock-names = "per", "ahb";
 				resets = <&src 1>;

arch/arm/boot/dts/imx6dl-hummingboard.dts

@@ -58,7 +58,7 @@
 
 	sound-spdif {
 		compatible = "fsl,imx-audio-spdif";
-		model = "imx-spdif";
+		model = "On-board SPDIF";
 		/* IMX6 doesn't implement this yet */
 		spdif-controller = <&spdif>;
 		spdif-out;
@@ -181,11 +181,13 @@
 };
 
 &usbh1 {
+	disable-over-current;
 	vbus-supply = <&reg_usbh1_vbus>;
 	status = "okay";
 };
 
 &usbotg {
+	disable-over-current;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hummingboard_usbotg_id>;
 	vbus-supply = <&reg_usbotg_vbus>;

arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts

@@ -119,7 +119,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii";
-	phy-reset-gpios = <&gpio3 23 0>;
+	phy-reset-gpios = <&gpio1 25 0>;
 	phy-supply = <&vgen2_1v2_eth>;
 	status = "okay";
 };
@@ -339,6 +339,7 @@
 				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
 				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
 				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+				MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x1b0b0
 				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
 			>;
 		};

arch/arm/boot/dts/imx6qdl-cubox-i.dtsi

@@ -61,7 +61,7 @@
 
 	sound-spdif {
 		compatible = "fsl,imx-audio-spdif";
-		model = "imx-spdif";
+		model = "Integrated SPDIF";
 		/* IMX6 doesn't implement this yet */
 		spdif-controller = <&spdif>;
 		spdif-out;
@@ -130,16 +130,23 @@
 			fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>;
 		};
 
+		pinctrl_cubox_i_usbh1: cubox-i-usbh1 {
+			fsl,pins = <MX6QDL_PAD_GPIO_3__USB_H1_OC 0x1b0b0>;
+		};
+
 		pinctrl_cubox_i_usbh1_vbus: cubox-i-usbh1-vbus {
 			fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x4001b0b0>;
 		};
 
-		pinctrl_cubox_i_usbotg_id: cubox-i-usbotg-id {
+		pinctrl_cubox_i_usbotg: cubox-i-usbotg {
 			/*
-			 * The Cubox-i pulls this low, but as it's pointless
+			 * The Cubox-i pulls ID low, but as it's pointless
 			 * leaving it as a pull-up, even if it is just 10uA.
 			 */
-			fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>;
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059
+				MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0
+			>;
 		};
 
 		pinctrl_cubox_i_usbotg_vbus: cubox-i-usbotg-vbus {
@@ -173,13 +180,15 @@
 };
 
 &usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cubox_i_usbh1>;
 	vbus-supply = <&reg_usbh1_vbus>;
 	status = "okay";
 };
 
 &usbotg {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_cubox_i_usbotg_id>;
+	pinctrl-0 = <&pinctrl_cubox_i_usbotg>;
 	vbus-supply = <&reg_usbotg_vbus>;
 	status = "okay";
 };

arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi

@@ -17,7 +17,7 @@
 	enet {
 		pinctrl_microsom_enet_ar8035: microsom-enet-ar8035 {
 			fsl,pins = <
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b8b0
 				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
 				/* AR8035 reset */
 				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x130b0

arch/arm/boot/dts/imx6sx-pinfunc.h

@@ -78,7 +78,7 @@
 #define MX6SX_PAD_GPIO1_IO07__USDHC2_WP                           0x0030 0x0378 0x0870 0x1 0x1
 #define MX6SX_PAD_GPIO1_IO07__ENET2_MDIO                          0x0030 0x0378 0x0770 0x2 0x0
 #define MX6SX_PAD_GPIO1_IO07__AUDMUX_MCLK                         0x0030 0x0378 0x0000 0x3 0x0
-#define MX6SX_PAD_GPIO1_IO07__UART1_CTS_B                         0x0030 0x0378 0x082C 0x4 0x1
+#define MX6SX_PAD_GPIO1_IO07__UART1_CTS_B                         0x0030 0x0378 0x0000 0x4 0x0
 #define MX6SX_PAD_GPIO1_IO07__GPIO1_IO_7                          0x0030 0x0378 0x0000 0x5 0x0
 #define MX6SX_PAD_GPIO1_IO07__SRC_EARLY_RESET                     0x0030 0x0378 0x0000 0x6 0x0
 #define MX6SX_PAD_GPIO1_IO07__DCIC2_OUT                           0x0030 0x0378 0x0000 0x7 0x0
@@ -96,7 +96,7 @@
 #define MX6SX_PAD_GPIO1_IO09__WDOG2_WDOG_B                        0x0038 0x0380 0x0000 0x1 0x0
 #define MX6SX_PAD_GPIO1_IO09__SDMA_EXT_EVENT_1                    0x0038 0x0380 0x0820 0x2 0x0
 #define MX6SX_PAD_GPIO1_IO09__CCM_OUT0                            0x0038 0x0380 0x0000 0x3 0x0
-#define MX6SX_PAD_GPIO1_IO09__UART2_CTS_B                         0x0038 0x0380 0x0834 0x4 0x1
+#define MX6SX_PAD_GPIO1_IO09__UART2_CTS_B                         0x0038 0x0380 0x0000 0x4 0x0
 #define MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9                          0x0038 0x0380 0x0000 0x5 0x0
 #define MX6SX_PAD_GPIO1_IO09__SRC_INT_BOOT                        0x0038 0x0380 0x0000 0x6 0x0
 #define MX6SX_PAD_GPIO1_IO09__OBSERVE_MUX_OUT_4                   0x0038 0x0380 0x0000 0x7 0x0
@@ -213,7 +213,7 @@
 #define MX6SX_PAD_CSI_DATA07__ESAI_TX3_RX2                        0x0068 0x03B0 0x079C 0x1 0x1
 #define MX6SX_PAD_CSI_DATA07__I2C4_SDA                            0x0068 0x03B0 0x07C4 0x2 0x2
 #define MX6SX_PAD_CSI_DATA07__KPP_ROW_7                           0x0068 0x03B0 0x07DC 0x3 0x0
-#define MX6SX_PAD_CSI_DATA07__UART6_CTS_B                         0x0068 0x03B0 0x0854 0x4 0x1
+#define MX6SX_PAD_CSI_DATA07__UART6_CTS_B                         0x0068 0x03B0 0x0000 0x4 0x0
 #define MX6SX_PAD_CSI_DATA07__GPIO1_IO_21                         0x0068 0x03B0 0x0000 0x5 0x0
 #define MX6SX_PAD_CSI_DATA07__WEIM_DATA_16                        0x0068 0x03B0 0x0000 0x6 0x0
 #define MX6SX_PAD_CSI_DATA07__DCIC1_OUT                           0x0068 0x03B0 0x0000 0x7 0x0
@@ -254,7 +254,7 @@
 #define MX6SX_PAD_CSI_VSYNC__CSI1_VSYNC                           0x0078 0x03C0 0x0708 0x0 0x0
 #define MX6SX_PAD_CSI_VSYNC__ESAI_TX5_RX0                         0x0078 0x03C0 0x07A4 0x1 0x1
 #define MX6SX_PAD_CSI_VSYNC__AUDMUX_AUD6_RXD                      0x0078 0x03C0 0x0674 0x2 0x1
-#define MX6SX_PAD_CSI_VSYNC__UART4_CTS_B                          0x0078 0x03C0 0x0844 0x3 0x3
+#define MX6SX_PAD_CSI_VSYNC__UART4_CTS_B                          0x0078 0x03C0 0x0000 0x3 0x0
 #define MX6SX_PAD_CSI_VSYNC__MQS_RIGHT                            0x0078 0x03C0 0x0000 0x4 0x0
 #define MX6SX_PAD_CSI_VSYNC__GPIO1_IO_25                          0x0078 0x03C0 0x0000 0x5 0x0
 #define MX6SX_PAD_CSI_VSYNC__WEIM_DATA_24                         0x0078 0x03C0 0x0000 0x6 0x0
@@ -352,7 +352,7 @@
 #define MX6SX_PAD_ENET2_TX_CLK__ENET2_TX_CLK                      0x00A0 0x03E8 0x0000 0x0 0x0
 #define MX6SX_PAD_ENET2_TX_CLK__ENET2_REF_CLK2                    0x00A0 0x03E8 0x076C 0x1 0x1
 #define MX6SX_PAD_ENET2_TX_CLK__I2C3_SDA                          0x00A0 0x03E8 0x07BC 0x2 0x1
-#define MX6SX_PAD_ENET2_TX_CLK__UART1_CTS_B                       0x00A0 0x03E8 0x082C 0x3 0x3
+#define MX6SX_PAD_ENET2_TX_CLK__UART1_CTS_B                       0x00A0 0x03E8 0x0000 0x3 0x0
 #define MX6SX_PAD_ENET2_TX_CLK__MLB_CLK                           0x00A0 0x03E8 0x07E8 0x4 0x1
 #define MX6SX_PAD_ENET2_TX_CLK__GPIO2_IO_9                        0x00A0 0x03E8 0x0000 0x5 0x0
 #define MX6SX_PAD_ENET2_TX_CLK__USB_OTG2_PWR                      0x00A0 0x03E8 0x0000 0x6 0x0
@@ -404,7 +404,7 @@
 #define MX6SX_PAD_KEY_COL4__SAI2_RX_BCLK                          0x00B4 0x03FC 0x0808 0x7 0x0
 #define MX6SX_PAD_KEY_ROW0__KPP_ROW_0                             0x00B8 0x0400 0x0000 0x0 0x0
 #define MX6SX_PAD_KEY_ROW0__USDHC3_WP                             0x00B8 0x0400 0x0000 0x1 0x0
-#define MX6SX_PAD_KEY_ROW0__UART6_CTS_B                           0x00B8 0x0400 0x0854 0x2 0x3
+#define MX6SX_PAD_KEY_ROW0__UART6_CTS_B                           0x00B8 0x0400 0x0000 0x2 0x0
 #define MX6SX_PAD_KEY_ROW0__ECSPI1_MOSI                           0x00B8 0x0400 0x0718 0x3 0x0
 #define MX6SX_PAD_KEY_ROW0__AUDMUX_AUD5_TXD                       0x00B8 0x0400 0x0660 0x4 0x0
 #define MX6SX_PAD_KEY_ROW0__GPIO2_IO_15                           0x00B8 0x0400 0x0000 0x5 0x0
@@ -423,7 +423,7 @@
 #define MX6SX_PAD_KEY_ROW1__M4_NMI                                0x00BC 0x0404 0x0000 0x8 0x0
 #define MX6SX_PAD_KEY_ROW2__KPP_ROW_2                             0x00C0 0x0408 0x0000 0x0 0x0
 #define MX6SX_PAD_KEY_ROW2__USDHC4_WP                             0x00C0 0x0408 0x0878 0x1 0x1
-#define MX6SX_PAD_KEY_ROW2__UART5_CTS_B                           0x00C0 0x0408 0x084C 0x2 0x3
+#define MX6SX_PAD_KEY_ROW2__UART5_CTS_B                           0x00C0 0x0408 0x0000 0x2 0x0
 #define MX6SX_PAD_KEY_ROW2__CAN1_RX                               0x00C0 0x0408 0x068C 0x3 0x1
 #define MX6SX_PAD_KEY_ROW2__CANFD_RX1                             0x00C0 0x0408 0x0694 0x4 0x1
 #define MX6SX_PAD_KEY_ROW2__GPIO2_IO_17                           0x00C0 0x0408 0x0000 0x5 0x0
@@ -815,7 +815,7 @@
 #define MX6SX_PAD_NAND_DATA05__RAWNAND_DATA05                     0x0164 0x04AC 0x0000 0x0 0x0
 #define MX6SX_PAD_NAND_DATA05__USDHC2_DATA5                       0x0164 0x04AC 0x0000 0x1 0x0
 #define MX6SX_PAD_NAND_DATA05__QSPI2_B_DQS                        0x0164 0x04AC 0x0000 0x2 0x0
-#define MX6SX_PAD_NAND_DATA05__UART3_CTS_B                        0x0164 0x04AC 0x083C 0x3 0x1
+#define MX6SX_PAD_NAND_DATA05__UART3_CTS_B                        0x0164 0x04AC 0x0000 0x3 0x0
 #define MX6SX_PAD_NAND_DATA05__AUDMUX_AUD4_RXC                    0x0164 0x04AC 0x064C 0x4 0x0
 #define MX6SX_PAD_NAND_DATA05__GPIO4_IO_9                         0x0164 0x04AC 0x0000 0x5 0x0
 #define MX6SX_PAD_NAND_DATA05__WEIM_AD_5                          0x0164 0x04AC 0x0000 0x6 0x0
@@ -957,7 +957,7 @@
 #define MX6SX_PAD_QSPI1A_SS1_B__SIM_M_HADDR_12                    0x019C 0x04E4 0x0000 0x7 0x0
 #define MX6SX_PAD_QSPI1A_SS1_B__SDMA_DEBUG_PC_3                   0x019C 0x04E4 0x0000 0x9 0x0
 #define MX6SX_PAD_QSPI1B_DATA0__QSPI1_B_DATA_0                    0x01A0 0x04E8 0x0000 0x0 0x0
-#define MX6SX_PAD_QSPI1B_DATA0__UART3_CTS_B                       0x01A0 0x04E8 0x083C 0x1 0x4
+#define MX6SX_PAD_QSPI1B_DATA0__UART3_CTS_B                       0x01A0 0x04E8 0x0000 0x1 0x0
 #define MX6SX_PAD_QSPI1B_DATA0__ECSPI3_MOSI                       0x01A0 0x04E8 0x0738 0x2 0x1
 #define MX6SX_PAD_QSPI1B_DATA0__ESAI_RX_FS                        0x01A0 0x04E8 0x0778 0x3 0x2
 #define MX6SX_PAD_QSPI1B_DATA0__CSI1_DATA_22                      0x01A0 0x04E8 0x06F4 0x4 0x1
@@ -1236,7 +1236,7 @@
 #define MX6SX_PAD_SD1_DATA2__AUDMUX_AUD5_TXFS                     0x0230 0x0578 0x0670 0x1 0x1
 #define MX6SX_PAD_SD1_DATA2__PWM3_OUT                             0x0230 0x0578 0x0000 0x2 0x0
 #define MX6SX_PAD_SD1_DATA2__GPT_COMPARE2                         0x0230 0x0578 0x0000 0x3 0x0
-#define MX6SX_PAD_SD1_DATA2__UART2_CTS_B                          0x0230 0x0578 0x0834 0x4 0x2
+#define MX6SX_PAD_SD1_DATA2__UART2_CTS_B                          0x0230 0x0578 0x0000 0x4 0x0
 #define MX6SX_PAD_SD1_DATA2__GPIO6_IO_4                           0x0230 0x0578 0x0000 0x5 0x0
 #define MX6SX_PAD_SD1_DATA2__ECSPI4_RDY                           0x0230 0x0578 0x0000 0x6 0x0
 #define MX6SX_PAD_SD1_DATA2__CCM_OUT0                             0x0230 0x0578 0x0000 0x7 0x0
@@ -1315,7 +1315,7 @@
 #define MX6SX_PAD_SD2_DATA3__VADC_CLAMP_CURRENT_3                 0x024C 0x0594 0x0000 0x8 0x0
 #define MX6SX_PAD_SD2_DATA3__MMDC_DEBUG_31                        0x024C 0x0594 0x0000 0x9 0x0
 #define MX6SX_PAD_SD3_CLK__USDHC3_CLK                             0x0250 0x0598 0x0000 0x0 0x0
-#define MX6SX_PAD_SD3_CLK__UART4_CTS_B                            0x0250 0x0598 0x0844 0x1 0x0
+#define MX6SX_PAD_SD3_CLK__UART4_CTS_B                            0x0250 0x0598 0x0000 0x1 0x0
 #define MX6SX_PAD_SD3_CLK__ECSPI4_SCLK                            0x0250 0x0598 0x0740 0x2 0x0
 #define MX6SX_PAD_SD3_CLK__AUDMUX_AUD6_RXFS                       0x0250 0x0598 0x0680 0x3 0x0
 #define MX6SX_PAD_SD3_CLK__LCDIF2_VSYNC                           0x0250 0x0598 0x0000 0x4 0x0
@@ -1409,7 +1409,7 @@
 #define MX6SX_PAD_SD3_DATA7__USDHC3_DATA7                         0x0274 0x05BC 0x0000 0x0 0x0
 #define MX6SX_PAD_SD3_DATA7__CAN1_RX                              0x0274 0x05BC 0x068C 0x1 0x0
 #define MX6SX_PAD_SD3_DATA7__CANFD_RX1                            0x0274 0x05BC 0x0694 0x2 0x0
-#define MX6SX_PAD_SD3_DATA7__UART3_CTS_B                          0x0274 0x05BC 0x083C 0x3 0x3
+#define MX6SX_PAD_SD3_DATA7__UART3_CTS_B                          0x0274 0x05BC 0x0000 0x3 0x0
 #define MX6SX_PAD_SD3_DATA7__LCDIF2_DATA_5                        0x0274 0x05BC 0x0000 0x4 0x0
 #define MX6SX_PAD_SD3_DATA7__GPIO7_IO_9                           0x0274 0x05BC 0x0000 0x5 0x0
 #define MX6SX_PAD_SD3_DATA7__ENET1_1588_EVENT0_IN                 0x0274 0x05BC 0x0000 0x6 0x0
@@ -1510,7 +1510,7 @@
 #define MX6SX_PAD_SD4_DATA6__SDMA_DEBUG_EVENT_CHANNEL_1           0x0298 0x05E0 0x0000 0x9 0x0
 #define MX6SX_PAD_SD4_DATA7__USDHC4_DATA7                         0x029C 0x05E4 0x0000 0x0 0x0
 #define MX6SX_PAD_SD4_DATA7__RAWNAND_DATA08                       0x029C 0x05E4 0x0000 0x1 0x0
-#define MX6SX_PAD_SD4_DATA7__UART5_CTS_B                          0x029C 0x05E4 0x084C 0x2 0x1
+#define MX6SX_PAD_SD4_DATA7__UART5_CTS_B                          0x029C 0x05E4 0x0000 0x2 0x0
 #define MX6SX_PAD_SD4_DATA7__ECSPI3_SS0                           0x029C 0x05E4 0x073C 0x3 0x0
 #define MX6SX_PAD_SD4_DATA7__LCDIF2_DATA_15                       0x029C 0x05E4 0x0000 0x4 0x0
 #define MX6SX_PAD_SD4_DATA7__GPIO6_IO_21                          0x029C 0x05E4 0x0000 0x5 0x0

arch/arm/boot/dts/omap3-beagle.dts

@@ -292,6 +292,7 @@
 &uart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart3_pins>;
+	interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
 };
 
 &gpio1 {

arch/arm/boot/dts/omap3-n900.dts

@@ -353,7 +353,7 @@
 	};
 
 	twl_power: power {
-		compatible = "ti,twl4030-power-n900";
+		compatible = "ti,twl4030-power-n900", "ti,twl4030-power-idle-osc-off";
 		ti,use_poweroff;
 	};
 };

arch/arm/boot/dts/omap3.dtsi

@@ -97,6 +97,7 @@
 		prm: prm@48306000 {
 			compatible = "ti,omap3-prm";
 			reg = <0x48306000 0x4000>;
+			interrupts = <11>;
 
 			prm_clocks: clocks {
 				#address-cells = <1>;

arch/arm/boot/dts/omap3430-sdp.dts

@@ -107,7 +107,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		reg = <1 0 0x08000000>;
-		ti,nand-ecc-opt = "ham1";
+		ti,nand-ecc-opt = "sw";
 		nand-bus-width = <8>;
 		gpmc,cs-on-ns = <0>;
 		gpmc,cs-rd-off-ns = <36>;

arch/arm/boot/dts/omap4-panda-common.dtsi

@@ -8,9 +8,6 @@
 #include "elpida_ecb240abacn.dtsi"
 
 / {
-	model = "TI OMAP4 PandaBoard";
-	compatible = "ti,omap4-panda", "ti,omap4430", "ti,omap4";
-
 	memory {
 		device_type = "memory";
 		reg = <0x80000000 0x40000000>; /* 1 GB */

arch/arm/boot/dts/omap4-panda-es.dts

@@ -10,6 +10,11 @@
 #include "omap4460.dtsi"
 #include "omap4-panda-common.dtsi"
 
+/ {
+	model = "TI OMAP4 PandaBoard-ES";
+	compatible = "ti,omap4-panda-es", "ti,omap4-panda", "ti,omap4460", "ti,omap4430", "ti,omap4";
+};
+
 /* Audio routing is differnet between PandaBoard4430 and PandaBoardES */
 &sound {
 	ti,model = "PandaBoardES";

arch/arm/boot/dts/omap4-panda.dts

@@ -9,3 +9,8 @@
 
 #include "omap443x.dtsi"
 #include "omap4-panda-common.dtsi"
+
+/ {
+	model = "TI OMAP4 PandaBoard";
+	compatible = "ti,omap4-panda", "ti,omap4430", "ti,omap4";
+};

arch/arm/boot/dts/omap4.dtsi

@@ -129,6 +129,7 @@
 		prm: prm@4a306000 {
 			compatible = "ti,omap4-prm";
 			reg = <0x4a306000 0x3000>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
 
 			prm_clocks: clocks {
 				#address-cells = <1>;

arch/arm/boot/dts/omap5.dtsi

@@ -131,6 +131,7 @@
 		prm: prm@4ae06000 {
 			compatible = "ti,omap5-prm";
 			reg = <0x4ae06000 0x3000>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
 
 			prm_clocks: clocks {
 				#address-cells = <1>;

arch/arm/boot/dts/omap54xx-clocks.dtsi

@@ -367,10 +367,12 @@
 
 	l3_iclk_div: l3_iclk_div {
 		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
+		compatible = "ti,divider-clock";
+		ti,max-div = <2>;
+		ti,bit-shift = <4>;
+		reg = <0x100>;
 		clocks = <&dpll_core_h12x2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
+		ti,index-power-of-two;
 	};
 
 	gpu_l3_iclk: gpu_l3_iclk {
@@ -383,10 +385,12 @@
 
 	l4_root_clk_div: l4_root_clk_div {
 		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
+		compatible = "ti,divider-clock";
+		ti,max-div = <2>;
+		ti,bit-shift = <8>;
+		reg = <0x100>;
 		clocks = <&l3_iclk_div>;
-		clock-mult = <1>;
-		clock-div = <1>;
+		ti,index-power-of-two;
 	};
 
 	slimbus1_slimbus_clk: slimbus1_slimbus_clk {

arch/arm/boot/dts/r8a7791-koelsch.dts

@@ -275,11 +275,6 @@
 		renesas,function = "msiof0";
 	};
 
-	i2c6_pins: i2c6 {
-		renesas,groups = "i2c6";
-		renesas,function = "i2c6";
-	};
-
 	usb0_pins: usb0 {
 		renesas,groups = "usb0";
 		renesas,function = "usb0";
@@ -424,8 +419,6 @@
 };
 
 &i2c6 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c6_pins>;
 	status = "okay";
 	clock-frequency = <100000>;
 

arch/arm/boot/dts/rk3066a-bqcurie2.dts

@@ -149,6 +149,8 @@
 &mmc0 { /* sdmmc */
 	num-slots = <1>;
 	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
 	vmmc-supply = <&vcc_sd0>;
 
 	slot@0 {

arch/arm/boot/dts/rk3188-radxarock.dts

@@ -179,6 +179,8 @@
 &mmc0 {
 	num-slots = <1>;
 	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
 	vmmc-supply = <&vcc_sd0>;
 
 	slot@0 {

arch/arm/boot/dts/sun6i-a31.dtsi

@@ -660,6 +660,8 @@
 			clock-frequency = <100000>;
 			resets = <&apb2_rst 0>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		i2c1: i2c@01c2b000 {
@@ -670,6 +672,8 @@
 			clock-frequency = <100000>;
 			resets = <&apb2_rst 1>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		i2c2: i2c@01c2b400 {
@@ -680,6 +684,8 @@
 			clock-frequency = <100000>;
 			resets = <&apb2_rst 2>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		i2c3: i2c@01c2b800 {
@@ -690,6 +696,8 @@
 			clock-frequency = <100000>;
 			resets = <&apb2_rst 3>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		gmac: ethernet@01c30000 {

arch/arm/boot/dts/tegra30-apalis.dtsi

@@ -423,7 +423,7 @@
 			vcc4-supply = <&sys_3v3_reg>;
 			vcc5-supply = <&sys_3v3_reg>;
 			vcc6-supply = <&vio_reg>;
-			vcc7-supply = <&sys_5v0_reg>;
+			vcc7-supply = <&charge_pump_5v0_reg>;
 			vccio-supply = <&sys_3v3_reg>;
 
 			regulators {
@@ -674,5 +674,14 @@
 			regulator-max-microvolt = <3300000>;
 			regulator-always-on;
 		};
+
+		charge_pump_5v0_reg: regulator@101 {
+			compatible = "regulator-fixed";
+			reg = <101>;
+			regulator-name = "5v0";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
 	};
 };

arch/arm/boot/dts/tegra30-colibri.dtsi

@@ -201,7 +201,7 @@
 			vcc4-supply = <&sys_3v3_reg>;
 			vcc5-supply = <&sys_3v3_reg>;
 			vcc6-supply = <&vio_reg>;
-			vcc7-supply = <&sys_5v0_reg>;
+			vcc7-supply = <&charge_pump_5v0_reg>;
 			vccio-supply = <&sys_3v3_reg>;
 
 			regulators {
@@ -373,5 +373,14 @@
 			regulator-max-microvolt = <3300000>;
 			regulator-always-on;
 		};
+
+		charge_pump_5v0_reg: regulator@101 {
+			compatible = "regulator-fixed";
+			reg = <101>;
+			regulator-name = "5v0";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
 	};
 };

arch/arm/boot/dts/twl6030.dtsi

@@ -83,10 +83,6 @@
 		regulator-always-on;
 	};
 
-	clk32kg: regulator-clk32kg {
-		compatible = "ti,twl6030-clk32kg";
-	};
-
 	twl_usb_comparator: usb-comparator {
 		compatible = "ti,twl6030-usb";
 		interrupts = <4>, <10>;

arch/arm/boot/dts/vf610-twr.dts

@@ -168,7 +168,7 @@
 		};
 
 		pinctrl_esdhc1: esdhc1grp {
-			fsl,fsl,pins = <
+			fsl,pins = <
 				VF610_PAD_PTA24__ESDHC1_CLK	0x31ef
 				VF610_PAD_PTA25__ESDHC1_CMD	0x31ef
 				VF610_PAD_PTA26__ESDHC1_DAT0	0x31ef

arch/arm/include/asm/cacheflush.h

@@ -472,7 +472,6 @@ static inline void __sync_cache_range_r(volatile void *p, size_t size)
 	"mcr	p15, 0, r0, c1, c0, 0	@ set SCTLR \n\t" \
 	"isb	\n\t" \
 	"bl	v7_flush_dcache_"__stringify(level)" \n\t" \
-	"clrex	\n\t" \
 	"mrc	p15, 0, r0, c1, c0, 1	@ get ACTLR \n\t" \
 	"bic	r0, r0, #(1 << 6)	@ disable local coherency \n\t" \
 	"mcr	p15, 0, r0, c1, c0, 1	@ set ACTLR \n\t" \

arch/arm/include/asm/cputype.h

@@ -74,6 +74,7 @@
 #define ARM_CPU_PART_CORTEX_A12		0x4100c0d0
 #define ARM_CPU_PART_CORTEX_A17		0x4100c0e0
 #define ARM_CPU_PART_CORTEX_A15		0x4100c0f0
+#define ARM_CPU_PART_MASK		0xff00fff0
 
 #define ARM_CPU_XSCALE_ARCH_MASK	0xe000
 #define ARM_CPU_XSCALE_ARCH_V1		0x2000
@@ -179,7 +180,7 @@ static inline unsigned int __attribute_const__ read_cpuid_implementor(void)
  */
 static inline unsigned int __attribute_const__ read_cpuid_part(void)
 {
-	return read_cpuid_id() & 0xff00fff0;
+	return read_cpuid_id() & ARM_CPU_PART_MASK;
 }
 
 static inline unsigned int __attribute_const__ __deprecated read_cpuid_part_number(void)

arch/arm/include/asm/elf.h

@@ -50,6 +50,7 @@ typedef struct user_fp elf_fpregset_t;
 #define R_ARM_ABS32		2
 #define R_ARM_CALL		28
 #define R_ARM_JUMP24		29
+#define R_ARM_TARGET1		38
 #define R_ARM_V4BX		40
 #define R_ARM_PREL31		42
 #define R_ARM_MOVW_ABS_NC	43

arch/arm/include/asm/smp_plat.h

@@ -8,6 +8,7 @@
 #include <linux/cpumask.h>
 #include <linux/err.h>
 
+#include <asm/cpu.h>
 #include <asm/cputype.h>
 
 /*
@@ -25,6 +26,20 @@ static inline bool is_smp(void)
 #endif
 }
 
+/**
+ * smp_cpuid_part() - return part id for a given cpu
+ * @cpu:	logical cpu id.
+ *
+ * Return: part id of logical cpu passed as argument.
+ */
+static inline unsigned int smp_cpuid_part(int cpu)
+{
+	struct cpuinfo_arm *cpu_info = &per_cpu(cpu_data, cpu);
+
+	return is_smp() ? cpu_info->cpuid & ARM_CPU_PART_MASK :
+			  read_cpuid_part();
+}
+
 /* all SMP configurations have the extended CPUID registers */
 #ifndef CONFIG_MMU
 #define tlb_ops_need_broadcast()	0

arch/arm/kernel/entry-header.S

@@ -208,26 +208,21 @@
 #endif
 	.endif
 	msr	spsr_cxsf, \rpsr
-#if defined(CONFIG_CPU_V6)
-	ldr	r0, [sp]
-	strex	r1, r2, [sp]			@ clear the exclusive monitor
-	ldmib	sp, {r1 - pc}^			@ load r1 - pc, cpsr
-#elif defined(CONFIG_CPU_32v6K)
-	clrex					@ clear the exclusive monitor
-	ldmia	sp, {r0 - pc}^			@ load r0 - pc, cpsr
-#else
-	ldmia	sp, {r0 - pc}^			@ load r0 - pc, cpsr
+#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_32v6K)
+	@ We must avoid clrex due to Cortex-A15 erratum #830321
+	sub	r0, sp, #4			@ uninhabited address
+	strex	r1, r2, [r0]			@ clear the exclusive monitor
 #endif
+	ldmia	sp, {r0 - pc}^			@ load r0 - pc, cpsr
 	.endm
 
 	.macro	restore_user_regs, fast = 0, offset = 0
 	ldr	r1, [sp, #\offset + S_PSR]	@ get calling cpsr
 	ldr	lr, [sp, #\offset + S_PC]!	@ get pc
 	msr	spsr_cxsf, r1			@ save in spsr_svc
-#if defined(CONFIG_CPU_V6)
+#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_32v6K)
+	@ We must avoid clrex due to Cortex-A15 erratum #830321
 	strex	r1, r2, [sp]			@ clear the exclusive monitor
-#elif defined(CONFIG_CPU_32v6K)
-	clrex					@ clear the exclusive monitor
 #endif
 	.if	\fast
 	ldmdb	sp, {r1 - lr}^			@ get calling r1 - lr
@@ -261,7 +256,10 @@
 	.endif
 	ldr	lr, [sp, #S_SP]			@ top of the stack
 	ldrd	r0, r1, [sp, #S_LR]		@ calling lr and pc
-	clrex					@ clear the exclusive monitor
+
+	@ We must avoid clrex due to Cortex-A15 erratum #830321
+	strex	r2, r1, [sp, #S_LR]		@ clear the exclusive monitor
+
 	stmdb	lr!, {r0, r1, \rpsr}		@ calling lr and rfe context
 	ldmia	sp, {r0 - r12}
 	mov	sp, lr
@@ -282,13 +280,16 @@
 	.endm
 #else	/* ifdef CONFIG_CPU_V7M */
 	.macro	restore_user_regs, fast = 0, offset = 0
-	clrex					@ clear the exclusive monitor
 	mov	r2, sp
 	load_user_sp_lr r2, r3, \offset + S_SP	@ calling sp, lr
 	ldr	r1, [sp, #\offset + S_PSR]	@ get calling cpsr
 	ldr	lr, [sp, #\offset + S_PC]	@ get pc
 	add	sp, sp, #\offset + S_SP
 	msr	spsr_cxsf, r1			@ save in spsr_svc
+
+	@ We must avoid clrex due to Cortex-A15 erratum #830321
+	strex	r1, r2, [sp]			@ clear the exclusive monitor
+
 	.if	\fast
 	ldmdb	sp, {r1 - r12}			@ get calling r1 - r12
 	.else

arch/arm/kernel/module.c

@@ -91,6 +91,7 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
 			break;
 
 		case R_ARM_ABS32:
+		case R_ARM_TARGET1:
 			*(u32 *)loc += sym->st_value;
 			break;
 

arch/arm/mach-bcm/Makefile

@@ -36,5 +36,4 @@ obj-$(CONFIG_ARCH_BCM_5301X)	+= bcm_5301x.o
 
 ifeq ($(CONFIG_ARCH_BRCMSTB),y)
 obj-y				+= brcmstb.o
-obj-$(CONFIG_SMP)		+= headsmp-brcmstb.o platsmp-brcmstb.o
 endif

arch/arm/mach-bcm/brcmstb.h

@@ -1,19 +0,0 @@
-/*
- * Copyright (C) 2013-2014 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __BRCMSTB_H__
-#define __BRCMSTB_H__
-
-void brcmstb_secondary_startup(void);
-
-#endif /* __BRCMSTB_H__ */

arch/arm/mach-bcm/headsmp-brcmstb.S

@@ -1,33 +0,0 @@
-/*
- * SMP boot code for secondary CPUs
- * Based on arch/arm/mach-tegra/headsmp.S
- *
- * Copyright (C) 2010 NVIDIA, Inc.
- * Copyright (C) 2013-2014 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <asm/assembler.h>
-#include <linux/linkage.h>
-#include <linux/init.h>
-
-        .section ".text.head", "ax"
-
-ENTRY(brcmstb_secondary_startup)
-        /*
-         * Ensure CPU is in a sane state by disabling all IRQs and switching
-         * into SVC mode.
-         */
-        setmode	PSR_I_BIT | PSR_F_BIT | SVC_MODE, r0
-
-        bl      v7_invalidate_l1
-        b       secondary_startup
-ENDPROC(brcmstb_secondary_startup)

arch/arm/mach-bcm/platsmp-brcmstb.c

@@ -1,363 +0,0 @@
-/*
- * Broadcom STB CPU SMP and hotplug support for ARM
- *
- * Copyright (C) 2013-2014 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/of_address.h>
-#include <linux/of_platform.h>
-#include <linux/printk.h>
-#include <linux/regmap.h>
-#include <linux/smp.h>
-#include <linux/mfd/syscon.h>
-#include <linux/spinlock.h>
-
-#include <asm/cacheflush.h>
-#include <asm/cp15.h>
-#include <asm/mach-types.h>
-#include <asm/smp_plat.h>
-
-#include "brcmstb.h"
-
-enum {
-	ZONE_MAN_CLKEN_MASK		= BIT(0),
-	ZONE_MAN_RESET_CNTL_MASK	= BIT(1),
-	ZONE_MAN_MEM_PWR_MASK		= BIT(4),
-	ZONE_RESERVED_1_MASK		= BIT(5),
-	ZONE_MAN_ISO_CNTL_MASK		= BIT(6),
-	ZONE_MANUAL_CONTROL_MASK	= BIT(7),
-	ZONE_PWR_DN_REQ_MASK		= BIT(9),
-	ZONE_PWR_UP_REQ_MASK		= BIT(10),
-	ZONE_BLK_RST_ASSERT_MASK	= BIT(12),
-	ZONE_PWR_OFF_STATE_MASK		= BIT(25),
-	ZONE_PWR_ON_STATE_MASK		= BIT(26),
-	ZONE_DPG_PWR_STATE_MASK		= BIT(28),
-	ZONE_MEM_PWR_STATE_MASK		= BIT(29),
-	ZONE_RESET_STATE_MASK		= BIT(31),
-	CPU0_PWR_ZONE_CTRL_REG		= 1,
-	CPU_RESET_CONFIG_REG		= 2,
-};
-
-static void __iomem *cpubiuctrl_block;
-static void __iomem *hif_cont_block;
-static u32 cpu0_pwr_zone_ctrl_reg;
-static u32 cpu_rst_cfg_reg;
-static u32 hif_cont_reg;
-
-#ifdef CONFIG_HOTPLUG_CPU
-static DEFINE_PER_CPU_ALIGNED(int, per_cpu_sw_state);
-
-static int per_cpu_sw_state_rd(u32 cpu)
-{
-	sync_cache_r(SHIFT_PERCPU_PTR(&per_cpu_sw_state, per_cpu_offset(cpu)));
-	return per_cpu(per_cpu_sw_state, cpu);
-}
-
-static void per_cpu_sw_state_wr(u32 cpu, int val)
-{
-	per_cpu(per_cpu_sw_state, cpu) = val;
-	dmb();
-	sync_cache_w(SHIFT_PERCPU_PTR(&per_cpu_sw_state, per_cpu_offset(cpu)));
-	dsb_sev();
-}
-#else
-static inline void per_cpu_sw_state_wr(u32 cpu, int val) { }
-#endif
-
-static void __iomem *pwr_ctrl_get_base(u32 cpu)
-{
-	void __iomem *base = cpubiuctrl_block + cpu0_pwr_zone_ctrl_reg;
-	base += (cpu_logical_map(cpu) * 4);
-	return base;
-}
-
-static u32 pwr_ctrl_rd(u32 cpu)
-{
-	void __iomem *base = pwr_ctrl_get_base(cpu);
-	return readl_relaxed(base);
-}
-
-static void pwr_ctrl_wr(u32 cpu, u32 val)
-{
-	void __iomem *base = pwr_ctrl_get_base(cpu);
-	writel(val, base);
-}
-
-static void cpu_rst_cfg_set(u32 cpu, int set)
-{
-	u32 val;
-	val = readl_relaxed(cpubiuctrl_block + cpu_rst_cfg_reg);
-	if (set)
-		val |= BIT(cpu_logical_map(cpu));
-	else
-		val &= ~BIT(cpu_logical_map(cpu));
-	writel_relaxed(val, cpubiuctrl_block + cpu_rst_cfg_reg);
-}
-
-static void cpu_set_boot_addr(u32 cpu, unsigned long boot_addr)
-{
-	const int reg_ofs = cpu_logical_map(cpu) * 8;
-	writel_relaxed(0, hif_cont_block + hif_cont_reg + reg_ofs);
-	writel_relaxed(boot_addr, hif_cont_block + hif_cont_reg + 4 + reg_ofs);
-}
-
-static void brcmstb_cpu_boot(u32 cpu)
-{
-	pr_info("SMP: Booting CPU%d...\n", cpu);
-
-	/*
-	 * set the reset vector to point to the secondary_startup
-	 * routine
-	 */
-	cpu_set_boot_addr(cpu, virt_to_phys(brcmstb_secondary_startup));
-
-	/* unhalt the cpu */
-	cpu_rst_cfg_set(cpu, 0);
-}
-
-static void brcmstb_cpu_power_on(u32 cpu)
-{
-	/*
-	 * The secondary cores power was cut, so we must go through
-	 * power-on initialization.
-	 */
-	u32 tmp;
-
-	pr_info("SMP: Powering up CPU%d...\n", cpu);
-
-	/* Request zone power up */
-	pwr_ctrl_wr(cpu, ZONE_PWR_UP_REQ_MASK);
-
-	/* Wait for the power up FSM to complete */
-	do {
-		tmp = pwr_ctrl_rd(cpu);
-	} while (!(tmp & ZONE_PWR_ON_STATE_MASK));
-
-	per_cpu_sw_state_wr(cpu, 1);
-}
-
-static int brcmstb_cpu_get_power_state(u32 cpu)
-{
-	int tmp = pwr_ctrl_rd(cpu);
-	return (tmp & ZONE_RESET_STATE_MASK) ? 0 : 1;
-}
-
-#ifdef CONFIG_HOTPLUG_CPU
-
-static void brcmstb_cpu_die(u32 cpu)
-{
-	v7_exit_coherency_flush(all);
-
-	/* Prevent all interrupts from reaching this CPU. */
-	arch_local_irq_disable();
-
-	/*
-	 * Final full barrier to ensure everything before this instruction has
-	 * quiesced.
-	 */
-	isb();
-	dsb();
-
-	per_cpu_sw_state_wr(cpu, 0);
-
-	/* Sit and wait to die */
-	wfi();
-
-	/* We should never get here... */
-	panic("Spurious interrupt on CPU %d received!\n", cpu);
-}
-
-static int brcmstb_cpu_kill(u32 cpu)
-{
-	u32 tmp;
-
-	pr_info("SMP: Powering down CPU%d...\n", cpu);
-
-	while (per_cpu_sw_state_rd(cpu))
-		;
-
-	/* Program zone reset */
-	pwr_ctrl_wr(cpu, ZONE_RESET_STATE_MASK | ZONE_BLK_RST_ASSERT_MASK |
-			      ZONE_PWR_DN_REQ_MASK);
-
-	/* Verify zone reset */
-	tmp = pwr_ctrl_rd(cpu);
-	if (!(tmp & ZONE_RESET_STATE_MASK))
-		pr_err("%s: Zone reset bit for CPU %d not asserted!\n",
-			__func__, cpu);
-
-	/* Wait for power down */
-	do {
-		tmp = pwr_ctrl_rd(cpu);
-	} while (!(tmp & ZONE_PWR_OFF_STATE_MASK));
-
-	/* Settle-time from Broadcom-internal DVT reference code */
-	udelay(7);
-
-	/* Assert reset on the CPU */
-	cpu_rst_cfg_set(cpu, 1);
-
-	return 1;
-}
-
-#endif /* CONFIG_HOTPLUG_CPU */
-
-static int __init setup_hifcpubiuctrl_regs(struct device_node *np)
-{
-	int rc = 0;
-	char *name;
-	struct device_node *syscon_np = NULL;
-
-	name = "syscon-cpu";
-
-	syscon_np = of_parse_phandle(np, name, 0);
-	if (!syscon_np) {
-		pr_err("can't find phandle %s\n", name);
-		rc = -EINVAL;
-		goto cleanup;
-	}
-
-	cpubiuctrl_block = of_iomap(syscon_np, 0);
-	if (!cpubiuctrl_block) {
-		pr_err("iomap failed for cpubiuctrl_block\n");
-		rc = -EINVAL;
-		goto cleanup;
-	}
-
-	rc = of_property_read_u32_index(np, name, CPU0_PWR_ZONE_CTRL_REG,
-					&cpu0_pwr_zone_ctrl_reg);
-	if (rc) {
-		pr_err("failed to read 1st entry from %s property (%d)\n", name,
-			rc);
-		rc = -EINVAL;
-		goto cleanup;
-	}
-
-	rc = of_property_read_u32_index(np, name, CPU_RESET_CONFIG_REG,
-					&cpu_rst_cfg_reg);
-	if (rc) {
-		pr_err("failed to read 2nd entry from %s property (%d)\n", name,
-			rc);
-		rc = -EINVAL;
-		goto cleanup;
-	}
-
-cleanup:
-	if (syscon_np)
-		of_node_put(syscon_np);
-
-	return rc;
-}
-
-static int __init setup_hifcont_regs(struct device_node *np)
-{
-	int rc = 0;
-	char *name;
-	struct device_node *syscon_np = NULL;
-
-	name = "syscon-cont";
-
-	syscon_np = of_parse_phandle(np, name, 0);
-	if (!syscon_np) {
-		pr_err("can't find phandle %s\n", name);
-		rc = -EINVAL;
-		goto cleanup;
-	}
-
-	hif_cont_block = of_iomap(syscon_np, 0);
-	if (!hif_cont_block) {
-		pr_err("iomap failed for hif_cont_block\n");
-		rc = -EINVAL;
-		goto cleanup;
-	}
-
-	/* offset is at top of hif_cont_block */
-	hif_cont_reg = 0;
-
-cleanup:
-	if (syscon_np)
-		of_node_put(syscon_np);
-
-	return rc;
-}
-
-static void __init brcmstb_cpu_ctrl_setup(unsigned int max_cpus)
-{
-	int rc;
-	struct device_node *np;
-	char *name;
-
-	name = "brcm,brcmstb-smpboot";
-	np = of_find_compatible_node(NULL, NULL, name);
-	if (!np) {
-		pr_err("can't find compatible node %s\n", name);
-		return;
-	}
-
-	rc = setup_hifcpubiuctrl_regs(np);
-	if (rc)
-		return;
-
-	rc = setup_hifcont_regs(np);
-	if (rc)
-		return;
-}
-
-static DEFINE_SPINLOCK(boot_lock);
-
-static void brcmstb_secondary_init(unsigned int cpu)
-{
-	/*
-	 * Synchronise with the boot thread.
-	 */
-	spin_lock(&boot_lock);
-	spin_unlock(&boot_lock);
-}
-
-static int brcmstb_boot_secondary(unsigned int cpu, struct task_struct *idle)
-{
-	/*
-	 * set synchronisation state between this boot processor
-	 * and the secondary one
-	 */
-	spin_lock(&boot_lock);
-
-	/* Bring up power to the core if necessary */
-	if (brcmstb_cpu_get_power_state(cpu) == 0)
-		brcmstb_cpu_power_on(cpu);
-
-	brcmstb_cpu_boot(cpu);
-
-	/*
-	 * now the secondary core is starting up let it run its
-	 * calibrations, then wait for it to finish
-	 */
-	spin_unlock(&boot_lock);
-
-	return 0;
-}
-
-static struct smp_operations brcmstb_smp_ops __initdata = {
-	.smp_prepare_cpus	= brcmstb_cpu_ctrl_setup,
-	.smp_secondary_init	= brcmstb_secondary_init,
-	.smp_boot_secondary	= brcmstb_boot_secondary,
-#ifdef CONFIG_HOTPLUG_CPU
-	.cpu_kill		= brcmstb_cpu_kill,
-	.cpu_die		= brcmstb_cpu_die,
-#endif
-};
-
-CPU_METHOD_OF_DECLARE(brcmstb_smp, "brcm,brahma-b15", &brcmstb_smp_ops);

arch/arm/mach-exynos/mcpm-exynos.c

@@ -43,7 +43,6 @@
 	"mcr	p15, 0, r0, c1, c0, 0	@ set SCTLR\n\t" \
 	"isb\n\t"\
 	"bl	v7_flush_dcache_"__stringify(level)"\n\t" \
-	"clrex\n\t"\
 	"mrc	p15, 0, r0, c1, c0, 1	@ get ACTLR\n\t" \
 	"bic	r0, r0, #(1 << 6)	@ disable local coherency\n\t" \
 	/* Dummy Load of a device register to avoid Erratum 799270 */ \

arch/arm/mach-imx/Kconfig

@@ -85,7 +85,6 @@ config SOC_IMX25
 
 config SOC_IMX27
 	bool
-	select ARCH_HAS_OPP
 	select CPU_ARM926T
 	select IMX_HAVE_IOMUX_V1
 	select MXC_AVIC
@@ -659,7 +658,6 @@ comment "Device tree only"
 
 config SOC_IMX5
 	bool
-	select ARCH_HAS_OPP
 	select HAVE_IMX_SRC
 	select MXC_TZIC
 

arch/arm/mach-imx/Makefile

@@ -93,9 +93,11 @@ obj-$(CONFIG_HAVE_IMX_ANATOP) += anatop.o
 obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o
 obj-$(CONFIG_HAVE_IMX_MMDC) += mmdc.o
 obj-$(CONFIG_HAVE_IMX_SRC) += src.o
+ifdef CONFIG_SOC_IMX6
 AFLAGS_headsmp.o :=-Wa,-march=armv7-a
 obj-$(CONFIG_SMP) += headsmp.o platsmp.o
 obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
+endif
 obj-$(CONFIG_SOC_IMX6Q) += clk-imx6q.o mach-imx6q.o
 obj-$(CONFIG_SOC_IMX6SL) += clk-imx6sl.o mach-imx6sl.o
 obj-$(CONFIG_SOC_IMX6SX) += clk-imx6sx.o mach-imx6sx.o

arch/arm/mach-imx/clk-imx6q.c

@@ -194,6 +194,10 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	clk[IMX6QDL_CLK_PLL3_80M]  = imx_clk_fixed_factor("pll3_80m",  "pll3_usb_otg",   1, 6);
 	clk[IMX6QDL_CLK_PLL3_60M]  = imx_clk_fixed_factor("pll3_60m",  "pll3_usb_otg",   1, 8);
 	clk[IMX6QDL_CLK_TWD]       = imx_clk_fixed_factor("twd",       "arm",            1, 2);
+	if (cpu_is_imx6dl()) {
+		clk[IMX6QDL_CLK_GPU2D_AXI] = imx_clk_fixed_factor("gpu2d_axi", "mmdc_ch0_axi_podf", 1, 1);
+		clk[IMX6QDL_CLK_GPU3D_AXI] = imx_clk_fixed_factor("gpu3d_axi", "mmdc_ch0_axi_podf", 1, 1);
+	}
 
 	clk[IMX6QDL_CLK_PLL4_POST_DIV] = clk_register_divider_table(NULL, "pll4_post_div", "pll4_audio", CLK_SET_RATE_PARENT, base + 0x70, 19, 2, 0, post_div_table, &imx_ccm_lock);
 	clk[IMX6QDL_CLK_PLL4_AUDIO_DIV] = clk_register_divider(NULL, "pll4_audio_div", "pll4_post_div", CLK_SET_RATE_PARENT, base + 0x170, 15, 1, 0, &imx_ccm_lock);
@@ -217,8 +221,10 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	clk[IMX6QDL_CLK_ESAI_SEL]         = imx_clk_mux("esai_sel",         base + 0x20, 19, 2, audio_sels,        ARRAY_SIZE(audio_sels));
 	clk[IMX6QDL_CLK_ASRC_SEL]         = imx_clk_mux("asrc_sel",         base + 0x30, 7,  2, audio_sels,        ARRAY_SIZE(audio_sels));
 	clk[IMX6QDL_CLK_SPDIF_SEL]        = imx_clk_mux("spdif_sel",        base + 0x30, 20, 2, audio_sels,        ARRAY_SIZE(audio_sels));
-	clk[IMX6QDL_CLK_GPU2D_AXI]        = imx_clk_mux("gpu2d_axi",        base + 0x18, 0,  1, gpu_axi_sels,      ARRAY_SIZE(gpu_axi_sels));
-	clk[IMX6QDL_CLK_GPU3D_AXI]        = imx_clk_mux("gpu3d_axi",        base + 0x18, 1,  1, gpu_axi_sels,      ARRAY_SIZE(gpu_axi_sels));
+	if (cpu_is_imx6q()) {
+		clk[IMX6QDL_CLK_GPU2D_AXI]        = imx_clk_mux("gpu2d_axi",        base + 0x18, 0,  1, gpu_axi_sels,      ARRAY_SIZE(gpu_axi_sels));
+		clk[IMX6QDL_CLK_GPU3D_AXI]        = imx_clk_mux("gpu3d_axi",        base + 0x18, 1,  1, gpu_axi_sels,      ARRAY_SIZE(gpu_axi_sels));
+	}
 	clk[IMX6QDL_CLK_GPU2D_CORE_SEL]   = imx_clk_mux("gpu2d_core_sel",   base + 0x18, 16, 2, gpu2d_core_sels,   ARRAY_SIZE(gpu2d_core_sels));
 	clk[IMX6QDL_CLK_GPU3D_CORE_SEL]   = imx_clk_mux("gpu3d_core_sel",   base + 0x18, 4,  2, gpu3d_core_sels,   ARRAY_SIZE(gpu3d_core_sels));
 	clk[IMX6QDL_CLK_GPU3D_SHADER_SEL] = imx_clk_mux("gpu3d_shader_sel", base + 0x18, 8,  2, gpu3d_shader_sels, ARRAY_SIZE(gpu3d_shader_sels));

arch/arm/mach-imx/suspend-imx6.S

@@ -173,6 +173,8 @@ ENTRY(imx6_suspend)
 	ldr	r6, [r11, #0x0]
 	ldr	r11, [r0, #PM_INFO_MX6Q_GPC_V_OFFSET]
 	ldr	r6, [r11, #0x0]
+	ldr	r11, [r0, #PM_INFO_MX6Q_IOMUXC_V_OFFSET]
+	ldr	r6, [r11, #0x0]
 
 	/* use r11 to store the IO address */
 	ldr	r11, [r0, #PM_INFO_MX6Q_SRC_V_OFFSET]

arch/arm/mach-omap2/Kconfig

@@ -25,7 +25,6 @@ config ARCH_OMAP4
 	bool "TI OMAP4"
 	depends on ARCH_MULTI_V7
 	select ARCH_OMAP2PLUS
-	select ARCH_HAS_OPP
 	select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP
 	select ARM_CPU_SUSPEND if PM
 	select ARM_ERRATA_720789
@@ -44,7 +43,6 @@ config SOC_OMAP5
 	bool "TI OMAP5"
 	depends on ARCH_MULTI_V7
 	select ARCH_OMAP2PLUS
-	select ARCH_HAS_OPP
 	select ARM_CPU_SUSPEND if PM
 	select ARM_GIC
 	select HAVE_ARM_SCU if SMP
@@ -56,14 +54,12 @@ config SOC_AM33XX
 	bool "TI AM33XX"
 	depends on ARCH_MULTI_V7
 	select ARCH_OMAP2PLUS
-	select ARCH_HAS_OPP
 	select ARM_CPU_SUSPEND if PM
 
 config SOC_AM43XX
 	bool "TI AM43x"
 	depends on ARCH_MULTI_V7
 	select ARCH_OMAP2PLUS
-	select ARCH_HAS_OPP
 	select ARM_GIC
 	select MACH_OMAP_GENERIC
 	select MIGHT_HAVE_CACHE_L2X0
@@ -72,7 +68,6 @@ config SOC_DRA7XX
 	bool "TI DRA7XX"
 	depends on ARCH_MULTI_V7
 	select ARCH_OMAP2PLUS
-	select ARCH_HAS_OPP
 	select ARM_CPU_SUSPEND if PM
 	select ARM_GIC
 	select HAVE_ARM_ARCH_TIMER

arch/arm/mach-omap2/Makefile

@@ -87,9 +87,10 @@ ifeq ($(CONFIG_PM),y)
 obj-$(CONFIG_ARCH_OMAP2)		+= pm24xx.o
 obj-$(CONFIG_ARCH_OMAP2)		+= sleep24xx.o
 obj-$(CONFIG_ARCH_OMAP3)		+= pm34xx.o sleep34xx.o
-obj-$(CONFIG_ARCH_OMAP4)		+= pm44xx.o omap-mpuss-lowpower.o
-obj-$(CONFIG_SOC_OMAP5)			+= omap-mpuss-lowpower.o
-obj-$(CONFIG_SOC_DRA7XX)		+= omap-mpuss-lowpower.o
+omap-4-5-pm-common			=  pm44xx.o omap-mpuss-lowpower.o
+obj-$(CONFIG_ARCH_OMAP4)		+= $(omap-4-5-pm-common)
+obj-$(CONFIG_SOC_OMAP5)			+= $(omap-4-5-pm-common)
+obj-$(CONFIG_SOC_DRA7XX)		+= $(omap-4-5-pm-common)
 obj-$(CONFIG_PM_DEBUG)			+= pm-debug.o
 
 obj-$(CONFIG_POWER_AVS_OMAP)		+= sr_device.o
@@ -102,7 +103,10 @@ endif
 
 ifeq ($(CONFIG_CPU_IDLE),y)
 obj-$(CONFIG_ARCH_OMAP3)                += cpuidle34xx.o
-obj-$(CONFIG_ARCH_OMAP4)                += cpuidle44xx.o
+omap-4-5-idle-common			=  cpuidle44xx.o
+obj-$(CONFIG_ARCH_OMAP4)		+= $(omap-4-5-idle-common)
+obj-$(CONFIG_SOC_OMAP5)			+= $(omap-4-5-idle-common)
+obj-$(CONFIG_SOC_DRA7XX)		+= $(omap-4-5-idle-common)
 endif
 
 # PRCM

arch/arm/mach-omap2/board-flash.c

@@ -142,7 +142,7 @@ __init board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs,
 	board_nand_data.nr_parts	= nr_parts;
 	board_nand_data.devsize		= nand_type;
 
-	board_nand_data.ecc_opt = OMAP_ECC_HAM1_CODE_HW;
+	board_nand_data.ecc_opt = OMAP_ECC_HAM1_CODE_SW;
 	gpmc_nand_init(&board_nand_data, gpmc_t);
 }
 #endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */

arch/arm/mach-omap2/common.h

@@ -60,7 +60,7 @@ static inline int omap3_pm_init(void)
 }
 #endif
 
-#if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_PM) && (defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || defined(CONFIG_SOC_DRA7XX))
 int omap4_pm_init(void);
 int omap4_pm_init_early(void);
 #else

arch/arm/mach-omap2/gpmc-nand.c

@@ -49,7 +49,8 @@ static bool gpmc_hwecc_bch_capable(enum omap_ecc ecc_opt)
 		return 0;
 
 	/* legacy platforms support only HAM1 (1-bit Hamming) ECC scheme */
-	if (ecc_opt == OMAP_ECC_HAM1_CODE_HW)
+	if (ecc_opt == OMAP_ECC_HAM1_CODE_HW ||
+	    ecc_opt == OMAP_ECC_HAM1_CODE_SW)
 		return 1;
 	else
 		return 0;

arch/arm/mach-omap2/gpmc.c

@@ -1403,8 +1403,11 @@ static int gpmc_probe_nand_child(struct platform_device *pdev,
 		pr_err("%s: ti,nand-ecc-opt not found\n", __func__);
 		return -ENODEV;
 	}
-	if (!strcmp(s, "ham1") || !strcmp(s, "sw") ||
-		!strcmp(s, "hw") || !strcmp(s, "hw-romcode"))
+
+	if (!strcmp(s, "sw"))
+		gpmc_nand_data->ecc_opt = OMAP_ECC_HAM1_CODE_SW;
+	else if (!strcmp(s, "ham1") ||
+		 !strcmp(s, "hw") || !strcmp(s, "hw-romcode"))
 		gpmc_nand_data->ecc_opt =
 				OMAP_ECC_HAM1_CODE_HW;
 	else if (!strcmp(s, "bch4"))

arch/arm/mach-omap2/id.c

@@ -663,7 +663,7 @@ void __init dra7xxx_check_revision(void)
 
 	default:
 		/* Unknown default to latest silicon rev as default*/
-		pr_warn("%s: unknown idcode=0x%08x (hawkeye=0x%08x,rev=0x%d)\n",
+		pr_warn("%s: unknown idcode=0x%08x (hawkeye=0x%08x,rev=0x%x)\n",
 			__func__, idcode, hawkeye, rev);
 		omap_revision = DRA752_REV_ES1_1;
 	}

arch/arm/mach-omap2/io.c

@@ -667,6 +667,7 @@ void __init omap5_init_early(void)
 	omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP54XX_CM_CORE_AON_BASE),
 			     OMAP2_L4_IO_ADDRESS(OMAP54XX_CM_CORE_BASE));
 	omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE));
+	omap4_pm_init_early();
 	omap_prm_base_init();
 	omap_cm_base_init();
 	omap44xx_prm_init();
@@ -682,6 +683,8 @@ void __init omap5_init_early(void)
 void __init omap5_init_late(void)
 {
 	omap_common_late_init();
+	omap4_pm_init();
+	omap2_clk_enable_autoidle_all();
 }
 #endif
 
@@ -695,6 +698,7 @@ void __init dra7xx_init_early(void)
 	omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(DRA7XX_CM_CORE_AON_BASE),
 			     OMAP2_L4_IO_ADDRESS(OMAP54XX_CM_CORE_BASE));
 	omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE));
+	omap4_pm_init_early();
 	omap_prm_base_init();
 	omap_cm_base_init();
 	omap44xx_prm_init();
@@ -709,6 +713,8 @@ void __init dra7xx_init_early(void)
 void __init dra7xx_init_late(void)
 {
 	omap_common_late_init();
+	omap4_pm_init();
+	omap2_clk_enable_autoidle_all();
 }
 #endif
 

arch/arm/mach-omap2/omap-mpuss-lowpower.c

@@ -56,6 +56,7 @@
 #include "omap4-sar-layout.h"
 #include "pm.h"
 #include "prcm_mpu44xx.h"
+#include "prcm_mpu54xx.h"
 #include "prminst44xx.h"
 #include "prcm44xx.h"
 #include "prm44xx.h"
@@ -68,7 +69,6 @@ struct omap4_cpu_pm_info {
 	void __iomem *scu_sar_addr;
 	void __iomem *wkup_sar_addr;
 	void __iomem *l2x0_sar_addr;
-	void (*secondary_startup)(void);
 };
 
 /**
@@ -76,6 +76,7 @@ struct omap4_cpu_pm_info {
  * @finish_suspend:	CPU suspend finisher function pointer
  * @resume:		CPU resume function pointer
  * @scu_prepare:	CPU Snoop Control program function pointer
+ * @hotplug_restart:	CPU restart function pointer
  *
  * Structure holds functions pointer for CPU low power operations like
  * suspend, resume and scu programming.
@@ -84,11 +85,13 @@ struct cpu_pm_ops {
 	int (*finish_suspend)(unsigned long cpu_state);
 	void (*resume)(void);
 	void (*scu_prepare)(unsigned int cpu_id, unsigned int cpu_state);
+	void (*hotplug_restart)(void);
 };
 
 static DEFINE_PER_CPU(struct omap4_cpu_pm_info, omap4_pm_info);
 static struct powerdomain *mpuss_pd;
 static void __iomem *sar_base;
+static u32 cpu_context_offset;
 
 static int default_finish_suspend(unsigned long cpu_state)
 {
@@ -106,6 +109,7 @@ struct cpu_pm_ops omap_pm_ops = {
 	.finish_suspend		= default_finish_suspend,
 	.resume			= dummy_cpu_resume,
 	.scu_prepare		= dummy_scu_prepare,
+	.hotplug_restart	= dummy_cpu_resume,
 };
 
 /*
@@ -116,7 +120,8 @@ static inline void set_cpu_wakeup_addr(unsigned int cpu_id, u32 addr)
 {
 	struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu_id);
 
-	writel_relaxed(addr, pm_info->wkup_sar_addr);
+	if (pm_info->wkup_sar_addr)
+		writel_relaxed(addr, pm_info->wkup_sar_addr);
 }
 
 /*
@@ -141,7 +146,8 @@ static void scu_pwrst_prepare(unsigned int cpu_id, unsigned int cpu_state)
 		break;
 	}
 
-	writel_relaxed(scu_pwr_st, pm_info->scu_sar_addr);
+	if (pm_info->scu_sar_addr)
+		writel_relaxed(scu_pwr_st, pm_info->scu_sar_addr);
 }
 
 /* Helper functions for MPUSS OSWR */
@@ -161,14 +167,14 @@ static inline void cpu_clear_prev_logic_pwrst(unsigned int cpu_id)
 
 	if (cpu_id) {
 		reg = omap4_prcm_mpu_read_inst_reg(OMAP4430_PRCM_MPU_CPU1_INST,
-					OMAP4_RM_CPU1_CPU1_CONTEXT_OFFSET);
+					cpu_context_offset);
 		omap4_prcm_mpu_write_inst_reg(reg, OMAP4430_PRCM_MPU_CPU1_INST,
-					OMAP4_RM_CPU1_CPU1_CONTEXT_OFFSET);
+					cpu_context_offset);
 	} else {
 		reg = omap4_prcm_mpu_read_inst_reg(OMAP4430_PRCM_MPU_CPU0_INST,
-					OMAP4_RM_CPU0_CPU0_CONTEXT_OFFSET);
+					cpu_context_offset);
 		omap4_prcm_mpu_write_inst_reg(reg, OMAP4430_PRCM_MPU_CPU0_INST,
-					OMAP4_RM_CPU0_CPU0_CONTEXT_OFFSET);
+					cpu_context_offset);
 	}
 }
 
@@ -179,7 +185,8 @@ static void l2x0_pwrst_prepare(unsigned int cpu_id, unsigned int save_state)
 {
 	struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu_id);
 
-	writel_relaxed(save_state, pm_info->l2x0_sar_addr);
+	if (pm_info->l2x0_sar_addr)
+		writel_relaxed(save_state, pm_info->l2x0_sar_addr);
 }
 
 /*
@@ -189,10 +196,14 @@ static void l2x0_pwrst_prepare(unsigned int cpu_id, unsigned int save_state)
 #ifdef CONFIG_CACHE_L2X0
 static void __init save_l2x0_context(void)
 {
-	writel_relaxed(l2x0_saved_regs.aux_ctrl,
-		     sar_base + L2X0_AUXCTRL_OFFSET);
-	writel_relaxed(l2x0_saved_regs.prefetch_ctrl,
-		     sar_base + L2X0_PREFETCH_CTRL_OFFSET);
+	void __iomem *l2x0_base = omap4_get_l2cache_base();
+
+	if (l2x0_base && sar_base) {
+		writel_relaxed(l2x0_saved_regs.aux_ctrl,
+			       sar_base + L2X0_AUXCTRL_OFFSET);
+		writel_relaxed(l2x0_saved_regs.prefetch_ctrl,
+			       sar_base + L2X0_PREFETCH_CTRL_OFFSET);
+	}
 }
 #else
 static void __init save_l2x0_context(void)
@@ -231,6 +242,10 @@ int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state)
 		save_state = 1;
 		break;
 	case PWRDM_POWER_RET:
+		if (IS_PM44XX_ERRATUM(PM_OMAP4_CPU_OSWR_DISABLE)) {
+			save_state = 0;
+			break;
+		}
 	default:
 		/*
 		 * CPUx CSWR is invalid hardware state. Also CPUx OSWR
@@ -298,12 +313,16 @@ int omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state)
 	if (omap_rev() == OMAP4430_REV_ES1_0)
 		return -ENXIO;
 
+	/* Use the achievable power state for the domain */
+	power_state = pwrdm_get_valid_lp_state(pm_info->pwrdm,
+					       false, power_state);
+
 	if (power_state == PWRDM_POWER_OFF)
 		cpu_state = 1;
 
 	pwrdm_clear_all_prev_pwrst(pm_info->pwrdm);
 	pwrdm_set_next_pwrst(pm_info->pwrdm, power_state);
-	set_cpu_wakeup_addr(cpu, virt_to_phys(pm_info->secondary_startup));
+	set_cpu_wakeup_addr(cpu, virt_to_phys(omap_pm_ops.hotplug_restart));
 	omap_pm_ops.scu_prepare(cpu, power_state);
 
 	/*
@@ -318,6 +337,21 @@ int omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state)
 }
 
 
+/*
+ * Enable Mercury Fast HG retention mode by default.
+ */
+static void enable_mercury_retention_mode(void)
+{
+	u32 reg;
+
+	reg = omap4_prcm_mpu_read_inst_reg(OMAP54XX_PRCM_MPU_DEVICE_INST,
+				  OMAP54XX_PRCM_MPU_PRM_PSCON_COUNT_OFFSET);
+	/* Enable HG_EN, HG_RAMPUP = fast mode */
+	reg |= BIT(24) | BIT(25);
+	omap4_prcm_mpu_write_inst_reg(reg, OMAP54XX_PRCM_MPU_DEVICE_INST,
+				      OMAP54XX_PRCM_MPU_PRM_PSCON_COUNT_OFFSET);
+}
+
 /*
  * Initialise OMAP4 MPUSS
  */
@@ -330,13 +364,17 @@ int __init omap4_mpuss_init(void)
 		return -ENODEV;
 	}
 
-	sar_base = omap4_get_sar_ram_base();
+	if (cpu_is_omap44xx())
+		sar_base = omap4_get_sar_ram_base();
 
 	/* Initilaise per CPU PM information */
 	pm_info = &per_cpu(omap4_pm_info, 0x0);
-	pm_info->scu_sar_addr = sar_base + SCU_OFFSET0;
-	pm_info->wkup_sar_addr = sar_base + CPU0_WAKEUP_NS_PA_ADDR_OFFSET;
-	pm_info->l2x0_sar_addr = sar_base + L2X0_SAVE_OFFSET0;
+	if (sar_base) {
+		pm_info->scu_sar_addr = sar_base + SCU_OFFSET0;
+		pm_info->wkup_sar_addr = sar_base +
+					CPU0_WAKEUP_NS_PA_ADDR_OFFSET;
+		pm_info->l2x0_sar_addr = sar_base + L2X0_SAVE_OFFSET0;
+	}
 	pm_info->pwrdm = pwrdm_lookup("cpu0_pwrdm");
 	if (!pm_info->pwrdm) {
 		pr_err("Lookup failed for CPU0 pwrdm\n");
@@ -351,13 +389,12 @@ int __init omap4_mpuss_init(void)
 	pwrdm_set_next_pwrst(pm_info->pwrdm, PWRDM_POWER_ON);
 
 	pm_info = &per_cpu(omap4_pm_info, 0x1);
-	pm_info->scu_sar_addr = sar_base + SCU_OFFSET1;
-	pm_info->wkup_sar_addr = sar_base + CPU1_WAKEUP_NS_PA_ADDR_OFFSET;
-	pm_info->l2x0_sar_addr = sar_base + L2X0_SAVE_OFFSET1;
-	if (cpu_is_omap446x())
-		pm_info->secondary_startup = omap4460_secondary_startup;
-	else
-		pm_info->secondary_startup = omap4_secondary_startup;
+	if (sar_base) {
+		pm_info->scu_sar_addr = sar_base + SCU_OFFSET1;
+		pm_info->wkup_sar_addr = sar_base +
+					CPU1_WAKEUP_NS_PA_ADDR_OFFSET;
+		pm_info->l2x0_sar_addr = sar_base + L2X0_SAVE_OFFSET1;
+	}
 
 	pm_info->pwrdm = pwrdm_lookup("cpu1_pwrdm");
 	if (!pm_info->pwrdm) {
@@ -380,20 +417,27 @@ int __init omap4_mpuss_init(void)
 	pwrdm_clear_all_prev_pwrst(mpuss_pd);
 	mpuss_clear_prev_logic_pwrst();
 
-	/* Save device type on scratchpad for low level code to use */
-	if (omap_type() != OMAP2_DEVICE_TYPE_GP)
-		writel_relaxed(1, sar_base + OMAP_TYPE_OFFSET);
-	else
-		writel_relaxed(0, sar_base + OMAP_TYPE_OFFSET);
-
-	save_l2x0_context();
+	if (sar_base) {
+		/* Save device type on scratchpad for low level code to use */
+		writel_relaxed((omap_type() != OMAP2_DEVICE_TYPE_GP) ? 1 : 0,
+			       sar_base + OMAP_TYPE_OFFSET);
+		save_l2x0_context();
+	}
 
 	if (cpu_is_omap44xx()) {
 		omap_pm_ops.finish_suspend = omap4_finish_suspend;
 		omap_pm_ops.resume = omap4_cpu_resume;
 		omap_pm_ops.scu_prepare = scu_pwrst_prepare;
+		omap_pm_ops.hotplug_restart = omap4_secondary_startup;
+		cpu_context_offset = OMAP4_RM_CPU0_CPU0_CONTEXT_OFFSET;
+	} else if (soc_is_omap54xx() || soc_is_dra7xx()) {
+		cpu_context_offset = OMAP54XX_RM_CPU0_CPU0_CONTEXT_OFFSET;
+		enable_mercury_retention_mode();
 	}
 
+	if (cpu_is_omap446x())
+		omap_pm_ops.hotplug_restart = omap4460_secondary_startup;
+
 	return 0;
 }
 

arch/arm/mach-omap2/omap-secure.h

@@ -45,6 +45,7 @@
 #define OMAP4_MON_L2X0_PREFETCH_INDEX	0x113
 
 #define OMAP5_DRA7_MON_SET_CNTFRQ_INDEX	0x109
+#define OMAP5_MON_AMBA_IF_INDEX		0x108
 
 /* Secure PPA(Primary Protected Application) APIs */
 #define OMAP4_PPA_L2_POR_INDEX		0x23

arch/arm/mach-omap2/omap-wakeupgen.c

@@ -32,6 +32,7 @@
 #include "soc.h"
 #include "omap4-sar-layout.h"
 #include "common.h"
+#include "pm.h"
 
 #define AM43XX_NR_REG_BANKS	7
 #define AM43XX_IRQS		224
@@ -381,7 +382,7 @@ static struct notifier_block irq_notifier_block = {
 static void __init irq_pm_init(void)
 {
 	/* FIXME: Remove this when MPU OSWR support is added */
-	if (!soc_is_omap54xx())
+	if (!IS_PM44XX_ERRATUM(PM_OMAP4_CPU_OSWR_DISABLE))
 		cpu_pm_register_notifier(&irq_notifier_block);
 }
 #else
@@ -406,6 +407,7 @@ int __init omap_wakeupgen_init(void)
 {
 	int i;
 	unsigned int boot_cpu = smp_processor_id();
+	u32 val;
 
 	/* Not supported on OMAP4 ES1.0 silicon */
 	if (omap_rev() == OMAP4430_REV_ES1_0) {
@@ -451,6 +453,22 @@ int __init omap_wakeupgen_init(void)
 	for (i = 0; i < max_irqs; i++)
 		irq_target_cpu[i] = boot_cpu;
 
+	/*
+	 * Enables OMAP5 ES2 PM Mode using ES2_PM_MODE in AMBA_IF_MODE
+	 * 0x0:	ES1 behavior, CPU cores would enter and exit OFF mode together.
+	 * 0x1:	ES2 behavior, CPU cores are allowed to enter/exit OFF mode
+	 * independently.
+	 * This needs to be set one time thanks to always ON domain.
+	 *
+	 * We do not support ES1 behavior anymore. OMAP5 is assumed to be
+	 * ES2.0, and the same is applicable for DRA7.
+	 */
+	if (soc_is_omap54xx() || soc_is_dra7xx()) {
+		val = __raw_readl(wakeupgen_base + OMAP_AMBA_IF_MODE);
+		val |= BIT(5);
+		omap_smc1(OMAP5_MON_AMBA_IF_INDEX, val);
+	}
+
 	irq_hotplug_init();
 	irq_pm_init();
 

arch/arm/mach-omap2/omap-wakeupgen.h

@@ -27,6 +27,7 @@
 #define OMAP_WKG_ENB_E_1			0x420
 #define OMAP_AUX_CORE_BOOT_0			0x800
 #define OMAP_AUX_CORE_BOOT_1			0x804
+#define OMAP_AMBA_IF_MODE			0x80c
 #define OMAP_PTMSYNCREQ_MASK			0xc00
 #define OMAP_PTMSYNCREQ_EN			0xc04
 #define OMAP_TIMESTAMPCYCLELO			0xc08

arch/arm/mach-omap2/omap_device.c

@@ -56,7 +56,7 @@ static void _add_clkdev(struct omap_device *od, const char *clk_alias,
 
 	r = clk_get_sys(dev_name(&od->pdev->dev), clk_alias);
 	if (!IS_ERR(r)) {
-		dev_warn(&od->pdev->dev,
+		dev_dbg(&od->pdev->dev,
 			 "alias %s already exists\n", clk_alias);
 		clk_put(r);
 		return;

arch/arm/mach-omap2/omap_hwmod.c

@@ -2185,6 +2185,8 @@ static int _enable(struct omap_hwmod *oh)
 			 oh->mux->pads_dynamic))) {
 		omap_hwmod_mux(oh->mux, _HWMOD_STATE_ENABLED);
 		_reconfigure_io_chain();
+	} else if (oh->flags & HWMOD_FORCE_MSTANDBY) {
+		_reconfigure_io_chain();
 	}
 
 	_add_initiator_dep(oh, mpu_oh);
@@ -2291,6 +2293,8 @@ static int _idle(struct omap_hwmod *oh)
 	if (oh->mux && oh->mux->pads_dynamic) {
 		omap_hwmod_mux(oh->mux, _HWMOD_STATE_IDLE);
 		_reconfigure_io_chain();
+	} else if (oh->flags & HWMOD_FORCE_MSTANDBY) {
+		_reconfigure_io_chain();
 	}
 
 	oh->_state = _HWMOD_STATE_IDLE;
@@ -3345,6 +3349,9 @@ int __init omap_hwmod_register_links(struct omap_hwmod_ocp_if **ois)
 	if (!ois)
 		return 0;
 
+	if (ois[0] == NULL) /* Empty list */
+		return 0;
+
 	if (!linkspace) {
 		if (_alloc_linkspace(ois)) {
 			pr_err("omap_hwmod: could not allocate link space\n");

arch/arm/mach-omap2/omap_hwmod_7xx_data.c

@@ -35,6 +35,7 @@
 #include "i2c.h"
 #include "mmc.h"
 #include "wd_timer.h"
+#include "soc.h"
 
 /* Base offset for all DRA7XX interrupts external to MPUSS */
 #define DRA7XX_IRQ_GIC_START	32
@@ -3261,7 +3262,6 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = {
 	&dra7xx_l4_per3__usb_otg_ss1,
 	&dra7xx_l4_per3__usb_otg_ss2,
 	&dra7xx_l4_per3__usb_otg_ss3,
-	&dra7xx_l4_per3__usb_otg_ss4,
 	&dra7xx_l3_main_1__vcp1,
 	&dra7xx_l4_per2__vcp1,
 	&dra7xx_l3_main_1__vcp2,
@@ -3270,8 +3270,26 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = {
 	NULL,
 };
 
+static struct omap_hwmod_ocp_if *dra74x_hwmod_ocp_ifs[] __initdata = {
+	&dra7xx_l4_per3__usb_otg_ss4,
+	NULL,
+};
+
+static struct omap_hwmod_ocp_if *dra72x_hwmod_ocp_ifs[] __initdata = {
+	NULL,
+};
+
 int __init dra7xx_hwmod_init(void)
 {
+	int ret;
+
 	omap_hwmod_init();
-	return omap_hwmod_register_links(dra7xx_hwmod_ocp_ifs);
+	ret = omap_hwmod_register_links(dra7xx_hwmod_ocp_ifs);
+
+	if (!ret && soc_is_dra74x())
+		return omap_hwmod_register_links(dra74x_hwmod_ocp_ifs);
+	else if (!ret && soc_is_dra72x())
+		return omap_hwmod_register_links(dra72x_hwmod_ocp_ifs);
+
+	return ret;
 }

arch/arm/mach-omap2/pdata-quirks.c

@@ -352,6 +352,16 @@ struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {
 	OF_DEV_AUXDATA("ti,omap4-padconf", 0x4a100040, "4a100040.pinmux", &pcs_pdata),
 	OF_DEV_AUXDATA("ti,omap4-padconf", 0x4a31e040, "4a31e040.pinmux", &pcs_pdata),
 #endif
+#ifdef CONFIG_SOC_OMAP5
+	OF_DEV_AUXDATA("ti,omap5-padconf", 0x4a002840, "4a002840.pinmux", &pcs_pdata),
+	OF_DEV_AUXDATA("ti,omap5-padconf", 0x4ae0c840, "4ae0c840.pinmux", &pcs_pdata),
+#endif
+#ifdef CONFIG_SOC_DRA7XX
+	OF_DEV_AUXDATA("ti,dra7-padconf", 0x4a003400, "4a003400.pinmux", &pcs_pdata),
+#endif
+#ifdef CONFIG_SOC_AM43XX
+	OF_DEV_AUXDATA("ti,am437-padconf", 0x44e10800, "44e10800.pinmux", &pcs_pdata),
+#endif
 #if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
 	OF_DEV_AUXDATA("ti,omap4-iommu", 0x4a066000, "4a066000.mmu",
 		       &omap4_iommu_pdata),

arch/arm/mach-omap2/pm.h

@@ -101,6 +101,7 @@ static inline void enable_omap3630_toggle_l2_on_restore(void) { }
 #endif		/* defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3) */
 
 #define PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD	(1 << 0)
+#define PM_OMAP4_CPU_OSWR_DISABLE		(1 << 1)
 
 #if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP4)
 extern u16 pm44xx_errata;

arch/arm/mach-omap2/pm44xx.c

@@ -29,6 +29,7 @@ u16 pm44xx_errata;
 struct power_state {
 	struct powerdomain *pwrdm;
 	u32 next_state;
+	u32 next_logic_state;
 #ifdef CONFIG_SUSPEND
 	u32 saved_state;
 	u32 saved_logic_state;
@@ -36,6 +37,8 @@ struct power_state {
 	struct list_head node;
 };
 
+static u32 cpu_suspend_state = PWRDM_POWER_OFF;
+
 static LIST_HEAD(pwrst_list);
 
 #ifdef CONFIG_SUSPEND
@@ -54,7 +57,7 @@ static int omap4_pm_suspend(void)
 	/* Set targeted power domain states by suspend */
 	list_for_each_entry(pwrst, &pwrst_list, node) {
 		omap_set_pwrdm_state(pwrst->pwrdm, pwrst->next_state);
-		pwrdm_set_logic_retst(pwrst->pwrdm, PWRDM_POWER_OFF);
+		pwrdm_set_logic_retst(pwrst->pwrdm, pwrst->next_logic_state);
 	}
 
 	/*
@@ -66,7 +69,7 @@ static int omap4_pm_suspend(void)
 	 * domain CSWR is not supported by hardware.
 	 * More details can be found in OMAP4430 TRM section 4.3.4.2.
 	 */
-	omap4_enter_lowpower(cpu_id, PWRDM_POWER_OFF);
+	omap4_enter_lowpower(cpu_id, cpu_suspend_state);
 
 	/* Restore next powerdomain state */
 	list_for_each_entry(pwrst, &pwrst_list, node) {
@@ -112,15 +115,22 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused)
 	 * through hotplug path and CPU0 explicitly programmed
 	 * further down in the code path
 	 */
-	if (!strncmp(pwrdm->name, "cpu", 3))
+	if (!strncmp(pwrdm->name, "cpu", 3)) {
+		if (IS_PM44XX_ERRATUM(PM_OMAP4_CPU_OSWR_DISABLE))
+			cpu_suspend_state = PWRDM_POWER_RET;
 		return 0;
+	}
 
 	pwrst = kmalloc(sizeof(struct power_state), GFP_ATOMIC);
 	if (!pwrst)
 		return -ENOMEM;
 
 	pwrst->pwrdm = pwrdm;
-	pwrst->next_state = PWRDM_POWER_RET;
+	pwrst->next_state = pwrdm_get_valid_lp_state(pwrdm, false,
+						     PWRDM_POWER_RET);
+	pwrst->next_logic_state = pwrdm_get_valid_lp_state(pwrdm, true,
+							   PWRDM_POWER_OFF);
+
 	list_add(&pwrst->node, &pwrst_list);
 
 	return omap_set_pwrdm_state(pwrst->pwrdm, pwrst->next_state);
@@ -202,6 +212,32 @@ static inline int omap4_init_static_deps(void)
 	return ret;
 }
 
+/**
+ * omap5_dra7_init_static_deps - Init static clkdm dependencies on OMAP5 and
+ *				 DRA7
+ *
+ * The dynamic dependency between MPUSS -> EMIF is broken and has
+ * not worked as expected. The hardware recommendation is to
+ * enable static dependencies for these to avoid system
+ * lock ups or random crashes.
+ */
+static inline int omap5_dra7_init_static_deps(void)
+{
+	struct clockdomain *mpuss_clkdm, *emif_clkdm;
+	int ret;
+
+	mpuss_clkdm = clkdm_lookup("mpu_clkdm");
+	emif_clkdm = clkdm_lookup("emif_clkdm");
+	if (!mpuss_clkdm || !emif_clkdm)
+		return -EINVAL;
+
+	ret = clkdm_add_wkdep(mpuss_clkdm, emif_clkdm);
+	if (ret)
+		pr_err("Failed to add MPUSS -> EMIF wakeup dependency\n");
+
+	return ret;
+}
+
 /**
  * omap4_pm_init_early - Does early initialization necessary for OMAP4+ devices
  *
@@ -212,6 +248,9 @@ int __init omap4_pm_init_early(void)
 	if (cpu_is_omap446x())
 		pm44xx_errata |= PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD;
 
+	if (soc_is_omap54xx() || soc_is_dra7xx())
+		pm44xx_errata |= PM_OMAP4_CPU_OSWR_DISABLE;
+
 	return 0;
 }
 
@@ -239,10 +278,14 @@ int __init omap4_pm_init(void)
 		goto err2;
 	}
 
-	if (cpu_is_omap44xx()) {
+	if (cpu_is_omap44xx())
 		ret = omap4_init_static_deps();
-		if (ret)
-			goto err2;
+	else if (soc_is_omap54xx() || soc_is_dra7xx())
+		ret = omap5_dra7_init_static_deps();
+
+	if (ret) {
+		pr_err("Failed to initialise static dependencies.\n");
+		goto err2;
 	}
 
 	ret = omap4_mpuss_init();

arch/arm/mach-omap2/powerdomain.c

@@ -546,7 +546,8 @@ int pwrdm_for_each_clkdm(struct powerdomain *pwrdm,
 		return -EINVAL;
 
 	for (i = 0; i < PWRDM_MAX_CLKDMS && !ret; i++)
-		ret = (*fn)(pwrdm, pwrdm->pwrdm_clkdms[i]);
+		if (pwrdm->pwrdm_clkdms[i])
+			ret = (*fn)(pwrdm, pwrdm->pwrdm_clkdms[i]);
 
 	return ret;
 }
@@ -1079,6 +1080,82 @@ int pwrdm_post_transition(struct powerdomain *pwrdm)
 	return 0;
 }
 
+/**
+ * pwrdm_get_valid_lp_state() - Find best match deep power state
+ * @pwrdm:	power domain for which we want to find best match
+ * @is_logic_state: Are we looking for logic state match here? Should
+ *		    be one of PWRDM_xxx macro values
+ * @req_state:	requested power state
+ *
+ * Returns: closest match for requested power state. default fallback
+ * is RET for logic state and ON for power state.
+ *
+ * This does a search from the power domain data looking for the
+ * closest valid power domain state that the hardware can achieve.
+ * PRCM definitions for PWRSTCTRL allows us to program whatever
+ * configuration we'd like, and PRCM will actually attempt such
+ * a transition, however if the powerdomain does not actually support it,
+ * we endup with a hung system. The valid power domain states are already
+ * available in our powerdomain data files. So this function tries to do
+ * the following:
+ * a) find if we have an exact match to the request - no issues.
+ * b) else find if a deeper power state is possible.
+ * c) failing which, it tries to find closest higher power state for the
+ * request.
+ */
+u8 pwrdm_get_valid_lp_state(struct powerdomain *pwrdm,
+			    bool is_logic_state, u8 req_state)
+{
+	u8 pwrdm_states = is_logic_state ? pwrdm->pwrsts_logic_ret :
+			pwrdm->pwrsts;
+	/* For logic, ret is highest and others, ON is highest */
+	u8 default_pwrst = is_logic_state ? PWRDM_POWER_RET : PWRDM_POWER_ON;
+	u8 new_pwrst;
+	bool found;
+
+	/* If it is already supported, nothing to search */
+	if (pwrdm_states & BIT(req_state))
+		return req_state;
+
+	if (!req_state)
+		goto up_search;
+
+	/*
+	 * So, we dont have a exact match
+	 * Can we get a deeper power state match?
+	 */
+	new_pwrst = req_state - 1;
+	found = true;
+	while (!(pwrdm_states & BIT(new_pwrst))) {
+		/* No match even at OFF? Not available */
+		if (new_pwrst == PWRDM_POWER_OFF) {
+			found = false;
+			break;
+		}
+		new_pwrst--;
+	}
+
+	if (found)
+		goto done;
+
+up_search:
+	/* OK, no deeper ones, can we get a higher match? */
+	new_pwrst = req_state + 1;
+	while (!(pwrdm_states & BIT(new_pwrst))) {
+		if (new_pwrst > PWRDM_POWER_ON) {
+			WARN(1, "powerdomain: %s: Fix max powerstate to ON\n",
+			     pwrdm->name);
+			return PWRDM_POWER_ON;
+		}
+
+		if (new_pwrst == default_pwrst)
+			break;
+		new_pwrst++;
+	}
+done:
+	return new_pwrst;
+}
+
 /**
  * omap_set_pwrdm_state - change a powerdomain's current power state
  * @pwrdm: struct powerdomain * to change the power state of

arch/arm/mach-omap2/powerdomain.h

@@ -39,6 +39,7 @@
 #define PWRSTS_OFF_RET		(PWRSTS_OFF | PWRSTS_RET)
 #define PWRSTS_RET_ON		(PWRSTS_RET | PWRSTS_ON)
 #define PWRSTS_OFF_RET_ON	(PWRSTS_OFF_RET | PWRSTS_ON)
+#define PWRSTS_INA_ON		(PWRSTS_INACTIVE | PWRSTS_ON)
 
 
 /*
@@ -219,6 +220,9 @@ struct voltagedomain *pwrdm_get_voltdm(struct powerdomain *pwrdm);
 
 int pwrdm_get_mem_bank_count(struct powerdomain *pwrdm);
 
+u8 pwrdm_get_valid_lp_state(struct powerdomain *pwrdm,
+			    bool is_logic_state, u8 req_state);
+
 int pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst);
 int pwrdm_read_next_pwrst(struct powerdomain *pwrdm);
 int pwrdm_read_pwrst(struct powerdomain *pwrdm);

arch/arm/mach-omap2/powerdomains54xx_data.c

@@ -35,7 +35,7 @@ static struct powerdomain core_54xx_pwrdm = {
 	.prcm_offs	  = OMAP54XX_PRM_CORE_INST,
 	.prcm_partition	  = OMAP54XX_PRM_PARTITION,
 	.pwrsts		  = PWRSTS_RET_ON,
-	.pwrsts_logic_ret = PWRSTS_OFF_RET,
+	.pwrsts_logic_ret = PWRSTS_RET,
 	.banks		  = 5,
 	.pwrsts_mem_ret	= {
 		[0] = PWRSTS_OFF_RET,	/* core_nret_bank */
@@ -107,8 +107,8 @@ static struct powerdomain cpu0_54xx_pwrdm = {
 	.voltdm		  = { .name = "mpu" },
 	.prcm_offs	  = OMAP54XX_PRCM_MPU_PRM_C0_INST,
 	.prcm_partition	  = OMAP54XX_PRCM_MPU_PARTITION,
-	.pwrsts		  = PWRSTS_OFF_RET_ON,
-	.pwrsts_logic_ret = PWRSTS_OFF_RET,
+	.pwrsts		  = PWRSTS_RET_ON,
+	.pwrsts_logic_ret = PWRSTS_RET,
 	.banks		  = 1,
 	.pwrsts_mem_ret	= {
 		[0] = PWRSTS_OFF_RET,	/* cpu0_l1 */
@@ -124,8 +124,8 @@ static struct powerdomain cpu1_54xx_pwrdm = {
 	.voltdm		  = { .name = "mpu" },
 	.prcm_offs	  = OMAP54XX_PRCM_MPU_PRM_C1_INST,
 	.prcm_partition	  = OMAP54XX_PRCM_MPU_PARTITION,
-	.pwrsts		  = PWRSTS_OFF_RET_ON,
-	.pwrsts_logic_ret = PWRSTS_OFF_RET,
+	.pwrsts		  = PWRSTS_RET_ON,
+	.pwrsts_logic_ret = PWRSTS_RET,
 	.banks		  = 1,
 	.pwrsts_mem_ret	= {
 		[0] = PWRSTS_OFF_RET,	/* cpu1_l1 */
@@ -158,7 +158,7 @@ static struct powerdomain mpu_54xx_pwrdm = {
 	.prcm_offs	  = OMAP54XX_PRM_MPU_INST,
 	.prcm_partition	  = OMAP54XX_PRM_PARTITION,
 	.pwrsts		  = PWRSTS_RET_ON,
-	.pwrsts_logic_ret = PWRSTS_OFF_RET,
+	.pwrsts_logic_ret = PWRSTS_RET,
 	.banks		  = 2,
 	.pwrsts_mem_ret	= {
 		[0] = PWRSTS_OFF_RET,	/* mpu_l2 */

arch/arm/mach-omap2/powerdomains7xx_data.c

@@ -160,8 +160,8 @@ static struct powerdomain core_7xx_pwrdm = {
 	.name		  = "core_pwrdm",
 	.prcm_offs	  = DRA7XX_PRM_CORE_INST,
 	.prcm_partition	  = DRA7XX_PRM_PARTITION,
-	.pwrsts		  = PWRSTS_RET_ON,
-	.pwrsts_logic_ret = PWRSTS_OFF_RET,
+	.pwrsts		  = PWRSTS_INA_ON,
+	.pwrsts_logic_ret = PWRSTS_RET,
 	.banks		  = 5,
 	.pwrsts_mem_ret	= {
 		[0] = PWRSTS_OFF_RET,	/* core_nret_bank */
@@ -193,8 +193,8 @@ static struct powerdomain cpu0_7xx_pwrdm = {
 	.name		  = "cpu0_pwrdm",
 	.prcm_offs	  = DRA7XX_MPU_PRCM_PRM_C0_INST,
 	.prcm_partition	  = DRA7XX_MPU_PRCM_PARTITION,
-	.pwrsts		  = PWRSTS_OFF_RET_ON,
-	.pwrsts_logic_ret = PWRSTS_OFF_RET,
+	.pwrsts		  = PWRSTS_RET_ON,
+	.pwrsts_logic_ret = PWRSTS_RET,
 	.banks		  = 1,
 	.pwrsts_mem_ret	= {
 		[0] = PWRSTS_OFF_RET,	/* cpu0_l1 */
@@ -209,8 +209,8 @@ static struct powerdomain cpu1_7xx_pwrdm = {
 	.name		  = "cpu1_pwrdm",
 	.prcm_offs	  = DRA7XX_MPU_PRCM_PRM_C1_INST,
 	.prcm_partition	  = DRA7XX_MPU_PRCM_PARTITION,
-	.pwrsts		  = PWRSTS_OFF_RET_ON,
-	.pwrsts_logic_ret = PWRSTS_OFF_RET,
+	.pwrsts		  = PWRSTS_RET_ON,
+	.pwrsts_logic_ret = PWRSTS_RET,
 	.banks		  = 1,
 	.pwrsts_mem_ret	= {
 		[0] = PWRSTS_OFF_RET,	/* cpu1_l1 */
@@ -243,7 +243,7 @@ static struct powerdomain mpu_7xx_pwrdm = {
 	.prcm_offs	  = DRA7XX_PRM_MPU_INST,
 	.prcm_partition	  = DRA7XX_PRM_PARTITION,
 	.pwrsts		  = PWRSTS_RET_ON,
-	.pwrsts_logic_ret = PWRSTS_OFF_RET,
+	.pwrsts_logic_ret = PWRSTS_RET,
 	.banks		  = 2,
 	.pwrsts_mem_ret	= {
 		[0] = PWRSTS_OFF_RET,	/* mpu_l2 */

arch/arm/mach-omap2/prm3xxx.c

@@ -17,6 +17,7 @@
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/irq.h>
+#include <linux/of_irq.h>
 
 #include "soc.h"
 #include "common.h"
@@ -649,6 +650,11 @@ int __init omap3xxx_prm_init(void)
 	return prm_register(&omap3xxx_prm_ll_data);
 }
 
+static struct of_device_id omap3_prm_dt_match_table[] = {
+	{ .compatible = "ti,omap3-prm" },
+	{ }
+};
+
 static int omap3xxx_prm_late_init(void)
 {
 	int ret;
@@ -656,6 +662,18 @@ static int omap3xxx_prm_late_init(void)
 	if (!(prm_features & PRM_HAS_IO_WAKEUP))
 		return 0;
 
+	if (of_have_populated_dt()) {
+		struct device_node *np;
+		int irq_num;
+
+		np = of_find_matching_node(NULL, omap3_prm_dt_match_table);
+		if (np) {
+			irq_num = of_irq_get(np, 0);
+			if (irq_num >= 0)
+				omap3_prcm_irq_setup.irq = irq_num;
+		}
+	}
+
 	omap3xxx_prm_enable_io_wakeup();
 	ret = omap_prcm_register_chain_handler(&omap3_prcm_irq_setup);
 	if (!ret)

arch/arm/mach-omap2/prm44xx.c

@@ -17,6 +17,7 @@
 #include <linux/errno.h>
 #include <linux/err.h>
 #include <linux/io.h>
+#include <linux/of_irq.h>
 
 
 #include "soc.h"
@@ -32,7 +33,6 @@
 /* Static data */
 
 static const struct omap_prcm_irq omap4_prcm_irqs[] = {
-	OMAP_PRCM_IRQ("wkup",   0,      0),
 	OMAP_PRCM_IRQ("io",     9,      1),
 };
 
@@ -154,21 +154,36 @@ void omap4_prm_vp_clear_txdone(u8 vp_id)
 
 u32 omap4_prm_vcvp_read(u8 offset)
 {
+	s32 inst = omap4_prmst_get_prm_dev_inst();
+
+	if (inst == PRM_INSTANCE_UNKNOWN)
+		return 0;
+
 	return omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION,
-					   OMAP4430_PRM_DEVICE_INST, offset);
+					   inst, offset);
 }
 
 void omap4_prm_vcvp_write(u32 val, u8 offset)
 {
+	s32 inst = omap4_prmst_get_prm_dev_inst();
+
+	if (inst == PRM_INSTANCE_UNKNOWN)
+		return;
+
 	omap4_prminst_write_inst_reg(val, OMAP4430_PRM_PARTITION,
-				     OMAP4430_PRM_DEVICE_INST, offset);
+				     inst, offset);
 }
 
 u32 omap4_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset)
 {
+	s32 inst = omap4_prmst_get_prm_dev_inst();
+
+	if (inst == PRM_INSTANCE_UNKNOWN)
+		return 0;
+
 	return omap4_prminst_rmw_inst_reg_bits(mask, bits,
 					       OMAP4430_PRM_PARTITION,
-					       OMAP4430_PRM_DEVICE_INST,
+					       inst,
 					       offset);
 }
 
@@ -275,14 +290,18 @@ void omap44xx_prm_restore_irqen(u32 *saved_mask)
 void omap44xx_prm_reconfigure_io_chain(void)
 {
 	int i = 0;
+	s32 inst = omap4_prmst_get_prm_dev_inst();
+
+	if (inst == PRM_INSTANCE_UNKNOWN)
+		return;
 
 	/* Trigger WUCLKIN enable */
 	omap4_prm_rmw_inst_reg_bits(OMAP4430_WUCLK_CTRL_MASK,
 				    OMAP4430_WUCLK_CTRL_MASK,
-				    OMAP4430_PRM_DEVICE_INST,
+				    inst,
 				    OMAP4_PRM_IO_PMCTRL_OFFSET);
 	omap_test_timeout(
-		(((omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST,
+		(((omap4_prm_read_inst_reg(inst,
 					   OMAP4_PRM_IO_PMCTRL_OFFSET) &
 		   OMAP4430_WUCLK_STATUS_MASK) >>
 		  OMAP4430_WUCLK_STATUS_SHIFT) == 1),
@@ -292,10 +311,10 @@ void omap44xx_prm_reconfigure_io_chain(void)
 
 	/* Trigger WUCLKIN disable */
 	omap4_prm_rmw_inst_reg_bits(OMAP4430_WUCLK_CTRL_MASK, 0x0,
-				    OMAP4430_PRM_DEVICE_INST,
+				    inst,
 				    OMAP4_PRM_IO_PMCTRL_OFFSET);
 	omap_test_timeout(
-		(((omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST,
+		(((omap4_prm_read_inst_reg(inst,
 					   OMAP4_PRM_IO_PMCTRL_OFFSET) &
 		   OMAP4430_WUCLK_STATUS_MASK) >>
 		  OMAP4430_WUCLK_STATUS_SHIFT) == 0),
@@ -316,9 +335,14 @@ void omap44xx_prm_reconfigure_io_chain(void)
  */
 static void __init omap44xx_prm_enable_io_wakeup(void)
 {
+	s32 inst = omap4_prmst_get_prm_dev_inst();
+
+	if (inst == PRM_INSTANCE_UNKNOWN)
+		return;
+
 	omap4_prm_rmw_inst_reg_bits(OMAP4430_GLOBAL_WUEN_MASK,
 				    OMAP4430_GLOBAL_WUEN_MASK,
-				    OMAP4430_PRM_DEVICE_INST,
+				    inst,
 				    OMAP4_PRM_IO_PMCTRL_OFFSET);
 }
 
@@ -333,8 +357,13 @@ static u32 omap44xx_prm_read_reset_sources(void)
 	struct prm_reset_src_map *p;
 	u32 r = 0;
 	u32 v;
+	s32 inst = omap4_prmst_get_prm_dev_inst();
 
-	v = omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST,
+	if (inst == PRM_INSTANCE_UNKNOWN)
+		return 0;
+
+
+	v = omap4_prm_read_inst_reg(inst,
 				    OMAP4_RM_RSTST);
 
 	p = omap44xx_prm_reset_src_map;
@@ -664,17 +693,56 @@ static struct prm_ll_data omap44xx_prm_ll_data = {
 
 int __init omap44xx_prm_init(void)
 {
-	if (cpu_is_omap44xx())
+	if (cpu_is_omap44xx() || soc_is_omap54xx() || soc_is_dra7xx())
 		prm_features |= PRM_HAS_IO_WAKEUP;
 
 	return prm_register(&omap44xx_prm_ll_data);
 }
 
+static struct of_device_id omap_prm_dt_match_table[] = {
+	{ .compatible = "ti,omap4-prm" },
+	{ .compatible = "ti,omap5-prm" },
+	{ .compatible = "ti,dra7-prm" },
+	{ }
+};
+
 static int omap44xx_prm_late_init(void)
 {
+	struct device_node *np;
+	int irq_num;
+
 	if (!(prm_features & PRM_HAS_IO_WAKEUP))
 		return 0;
 
+	/* OMAP4+ is DT only now */
+	if (!of_have_populated_dt())
+		return 0;
+
+	np = of_find_matching_node(NULL, omap_prm_dt_match_table);
+
+	if (!np) {
+		/* Default loaded up with OMAP4 values */
+		if (!cpu_is_omap44xx())
+			return 0;
+	} else {
+		irq_num = of_irq_get(np, 0);
+		/*
+		 * Already have OMAP4 IRQ num. For all other platforms, we need
+		 * IRQ numbers from DT
+		 */
+		if (irq_num < 0 && !cpu_is_omap44xx()) {
+			if (irq_num == -EPROBE_DEFER)
+				return irq_num;
+
+			/* Have nothing to do */
+			return 0;
+		}
+
+		/* Once OMAP4 DT is filled as well */
+		if (irq_num >= 0)
+			omap4_prcm_irq_setup.irq = irq_num;
+	}
+
 	omap44xx_prm_enable_io_wakeup();
 
 	return omap_prcm_register_chain_handler(&omap4_prcm_irq_setup);

arch/arm/mach-omap2/prminst44xx.c

@@ -31,6 +31,8 @@
 
 static void __iomem *_prm_bases[OMAP4_MAX_PRCM_PARTITIONS];
 
+static s32 prm_dev_inst = PRM_INSTANCE_UNKNOWN;
+
 /**
  * omap_prm_base_init - Populates the prm partitions
  *
@@ -43,6 +45,24 @@ void omap_prm_base_init(void)
 	_prm_bases[OMAP4430_PRCM_MPU_PARTITION] = prcm_mpu_base;
 }
 
+s32 omap4_prmst_get_prm_dev_inst(void)
+{
+	if (prm_dev_inst != PRM_INSTANCE_UNKNOWN)
+		return prm_dev_inst;
+
+	/* This cannot be done way early at boot.. as things are not setup */
+	if (cpu_is_omap44xx())
+		prm_dev_inst = OMAP4430_PRM_DEVICE_INST;
+	else if (soc_is_omap54xx())
+		prm_dev_inst = OMAP54XX_PRM_DEVICE_INST;
+	else if (soc_is_dra7xx())
+		prm_dev_inst = DRA7XX_PRM_DEVICE_INST;
+	else if (soc_is_am43xx())
+		prm_dev_inst = AM43XX_PRM_DEVICE_INST;
+
+	return prm_dev_inst;
+}
+
 /* Read a register in a PRM instance */
 u32 omap4_prminst_read_inst_reg(u8 part, s16 inst, u16 idx)
 {
@@ -169,28 +189,18 @@ int omap4_prminst_deassert_hardreset(u8 shift, u8 part, s16 inst,
 void omap4_prminst_global_warm_sw_reset(void)
 {
 	u32 v;
-	s16 dev_inst;
+	s32 inst = omap4_prmst_get_prm_dev_inst();
 
-	if (cpu_is_omap44xx())
-		dev_inst = OMAP4430_PRM_DEVICE_INST;
-	else if (soc_is_omap54xx())
-		dev_inst = OMAP54XX_PRM_DEVICE_INST;
-	else if (soc_is_dra7xx())
-		dev_inst = DRA7XX_PRM_DEVICE_INST;
-	else if (soc_is_am43xx())
-		dev_inst = AM43XX_PRM_DEVICE_INST;
-	else
+	if (inst == PRM_INSTANCE_UNKNOWN)
 		return;
 
-	v = omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION, dev_inst,
+	v = omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION, inst,
 					OMAP4_PRM_RSTCTRL_OFFSET);
 	v |= OMAP4430_RST_GLOBAL_WARM_SW_MASK;
 	omap4_prminst_write_inst_reg(v, OMAP4430_PRM_PARTITION,
-				 dev_inst,
-				 OMAP4_PRM_RSTCTRL_OFFSET);
+				 inst, OMAP4_PRM_RSTCTRL_OFFSET);
 
 	/* OCP barrier */
 	v = omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION,
-				    dev_inst,
-				    OMAP4_PRM_RSTCTRL_OFFSET);
+				    inst, OMAP4_PRM_RSTCTRL_OFFSET);
 }

arch/arm/mach-omap2/prminst44xx.h

@@ -12,6 +12,9 @@
 #ifndef __ARCH_ASM_MACH_OMAP2_PRMINST44XX_H
 #define __ARCH_ASM_MACH_OMAP2_PRMINST44XX_H
 
+#define PRM_INSTANCE_UNKNOWN	-1
+extern s32 omap4_prmst_get_prm_dev_inst(void);
+
 /*
  * In an ideal world, we would not export these low-level functions,
  * but this will probably take some time to fix properly

arch/arm/mach-omap2/soc.h

@@ -245,6 +245,8 @@ IS_AM_SUBCLASS(437x, 0x437)
 #define soc_is_omap54xx()		0
 #define soc_is_omap543x()		0
 #define soc_is_dra7xx()			0
+#define soc_is_dra74x()			0
+#define soc_is_dra72x()			0
 
 #if defined(MULTI_OMAP2)
 # if defined(CONFIG_ARCH_OMAP2)
@@ -393,7 +395,11 @@ IS_OMAP_TYPE(3430, 0x3430)
 
 #if defined(CONFIG_SOC_DRA7XX)
 #undef soc_is_dra7xx
+#undef soc_is_dra74x
+#undef soc_is_dra72x
 #define soc_is_dra7xx()	(of_machine_is_compatible("ti,dra7"))
+#define soc_is_dra74x()	(of_machine_is_compatible("ti,dra74"))
+#define soc_is_dra72x()	(of_machine_is_compatible("ti,dra72"))
 #endif
 
 /* Various silicon revisions for omap2 */

arch/arm/mach-shmobile/Kconfig

@@ -80,6 +80,7 @@ config ARCH_SH7372
 	select ARM_CPU_SUSPEND if PM || CPU_IDLE
 	select CPU_V7
 	select SH_CLK_CPG
+	select SH_INTC
 	select SYS_SUPPORTS_SH_CMT
 	select SYS_SUPPORTS_SH_TMU
 
@@ -90,6 +91,7 @@ config ARCH_SH73A0
 	select CPU_V7
 	select I2C
 	select SH_CLK_CPG
+	select SH_INTC
 	select RENESAS_INTC_IRQPIN
 	select SYS_SUPPORTS_SH_CMT
 	select SYS_SUPPORTS_SH_TMU

arch/arm/mach-shmobile/clock-r8a7790.c

@@ -183,8 +183,8 @@ enum {
 
 static struct clk div4_clks[DIV4_NR] = {
 	[DIV4_SDH] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 8, 0x0dff, CLK_ENABLE_ON_INIT),
-	[DIV4_SD0] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 4, 0x1de0, CLK_ENABLE_ON_INIT),
-	[DIV4_SD1] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 0, 0x1de0, CLK_ENABLE_ON_INIT),
+	[DIV4_SD0] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 4, 0x1df0, CLK_ENABLE_ON_INIT),
+	[DIV4_SD1] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 0, 0x1df0, CLK_ENABLE_ON_INIT),
 };
 
 /* DIV6 clocks */

arch/arm/mach-shmobile/clock-r8a7791.c

@@ -152,7 +152,7 @@ enum {
 
 static struct clk div4_clks[DIV4_NR] = {
 	[DIV4_SDH] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 8, 0x0dff, CLK_ENABLE_ON_INIT),
-	[DIV4_SD0] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 4, 0x1de0, CLK_ENABLE_ON_INIT),
+	[DIV4_SD0] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 4, 0x1df0, CLK_ENABLE_ON_INIT),
 };
 
 /* DIV6 clocks */

arch/arm/mach-shmobile/clock-sh73a0.c

@@ -644,7 +644,7 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]), /* SCIFA5 */
 	CLKDEV_DEV_ID("e6cb0000.serial", &mstp_clks[MSTP207]), /* SCIFA5 */
 	CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP206]), /* SCIFB */
-	CLKDEV_DEV_ID("0xe6c3000.serial", &mstp_clks[MSTP206]), /* SCIFB */
+	CLKDEV_DEV_ID("e6c3000.serial", &mstp_clks[MSTP206]), /* SCIFB */
 	CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), /* SCIFA0 */
 	CLKDEV_DEV_ID("e6c40000.serial", &mstp_clks[MSTP204]), /* SCIFA0 */
 	CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]), /* SCIFA1 */

arch/arm/mach-vexpress/spc.c

@@ -426,9 +426,15 @@ static int ve_spc_populate_opps(uint32_t cluster)
 
 static int ve_init_opp_table(struct device *cpu_dev)
 {
-	int cluster = topology_physical_package_id(cpu_dev->id);
-	int idx, ret = 0, max_opp = info->num_opps[cluster];
-	struct ve_spc_opp *opps = info->opps[cluster];
+	int cluster;
+	int idx, ret = 0, max_opp;
+	struct ve_spc_opp *opps;
+
+	cluster = topology_physical_package_id(cpu_dev->id);
+	cluster = cluster < 0 ? 0 : cluster;
+
+	max_opp = info->num_opps[cluster];
+	opps = info->opps[cluster];
 
 	for (idx = 0; idx < max_opp; idx++, opps++) {
 		ret = dev_pm_opp_add(cpu_dev, opps->freq * 1000, opps->u_volt);
@@ -537,6 +543,8 @@ static struct clk *ve_spc_clk_register(struct device *cpu_dev)
 	spc->hw.init = &init;
 	spc->cluster = topology_physical_package_id(cpu_dev->id);
 
+	spc->cluster = spc->cluster < 0 ? 0 : spc->cluster;
+
 	init.name = dev_name(cpu_dev);
 	init.ops = &clk_spc_ops;
 	init.flags = CLK_IS_ROOT | CLK_GET_RATE_NOCACHE;

arch/arm/mm/abort-ev6.S

@@ -17,12 +17,6 @@
  */
 	.align	5
 ENTRY(v6_early_abort)
-#ifdef CONFIG_CPU_V6
-	sub	r1, sp, #4			@ Get unused stack location
-	strex	r0, r1, [r1]			@ Clear the exclusive monitor
-#elif defined(CONFIG_CPU_32v6K)
-	clrex
-#endif
 	mrc	p15, 0, r1, c5, c0, 0		@ get FSR
 	mrc	p15, 0, r0, c6, c0, 0		@ get FAR
 /*

arch/arm/mm/abort-ev7.S

@@ -13,12 +13,6 @@
  */
 	.align	5
 ENTRY(v7_early_abort)
-	/*
-	 * The effect of data aborts on on the exclusive access monitor are
-	 * UNPREDICTABLE. Do a CLREX to clear the state
-	 */
-	clrex
-
 	mrc	p15, 0, r1, c5, c0, 0		@ get FSR
 	mrc	p15, 0, r0, c6, c0, 0		@ get FAR
 

arch/arm64/Makefile

@@ -39,7 +39,7 @@ head-y		:= arch/arm64/kernel/head.o
 
 # The byte offset of the kernel image in RAM from the start of RAM.
 ifeq ($(CONFIG_ARM64_RANDOMIZE_TEXT_OFFSET), y)
-TEXT_OFFSET := $(shell awk 'BEGIN {srand(); printf "0x%04x0\n", int(65535 * rand())}')
+TEXT_OFFSET := $(shell awk 'BEGIN {srand(); printf "0x%03x000\n", int(512 * rand())}')
 else
 TEXT_OFFSET := 0x00080000
 endif

arch/arm64/configs/defconfig

@@ -64,6 +64,8 @@ CONFIG_VIRTIO_BLK=y
 CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_ATA=y
+CONFIG_AHCI_XGENE=y
+CONFIG_PHY_XGENE=y
 CONFIG_PATA_PLATFORM=y
 CONFIG_PATA_OF_PLATFORM=y
 CONFIG_NETDEVICES=y
@@ -71,6 +73,7 @@ CONFIG_TUN=y
 CONFIG_VIRTIO_NET=y
 CONFIG_SMC91X=y
 CONFIG_SMSC911X=y
+CONFIG_NET_XGENE=y
 # CONFIG_WLAN is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_SERIO_SERPORT is not set

arch/arm64/include/asm/sparsemem.h

@@ -17,7 +17,7 @@
 #define __ASM_SPARSEMEM_H
 
 #ifdef CONFIG_SPARSEMEM
-#define MAX_PHYSMEM_BITS	40
+#define MAX_PHYSMEM_BITS	48
 #define SECTION_SIZE_BITS	30
 #endif