Merge branch 'master' into queue

* master: (15791 commits)
  Linux 3.9-rc1
  btrfs/raid56: Add missing #include <linux/vmalloc.h>
  fix compat_sys_rt_sigprocmask()
  SUNRPC: One line comment fix
  ext4: enable quotas before orphan cleanup
  ext4: don't allow quota mount options when quota feature enabled
  ext4: fix a warning from sparse check for ext4_dir_llseek
  ext4: convert number of blocks to clusters properly
  ext4: fix possible memory leak in ext4_remount()
  jbd2: fix ERR_PTR dereference in jbd2__journal_start
  metag: Provide dma_get_sgtable()
  metag: prom.h: remove declaration of metag_dt_memblock_reserve()
  metag: copy devicetree to non-init memory
  metag: cleanup metag_ksyms.c includes
  metag: move mm/init.c exports out of metag_ksyms.c
  metag: move usercopy.c exports out of metag_ksyms.c
  metag: move setup.c exports out of metag_ksyms.c
  metag: move kick.c exports out of metag_ksyms.c
  metag: move traps.c exports out of metag_ksyms.c
  metag: move irq enable out of irqflags.h on SMP
  ...

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

Conflicts:
	arch/x86/kernel/kvmclock.c

.gitignore

@@ -60,7 +60,6 @@ modules.builtin
 # Generated include files
 #
 include/config
-include/linux/version.h
 include/generated
 arch/*/include/generated
 

CREDITS

@@ -1572,12 +1572,12 @@ S: Wantage, New Jersey 07461
 S: USA
 
 N: Harald Hoyer
-E: harald.hoyer@parzelle.de
-W: http://parzelle.de/
+E: harald@redhat.com
+W: http://www.harald-hoyer.de
 D: ip_masq_quake
 D: md boot support
-S: Hohe Strasse 30
-S: D-70176 Stuttgart
+S: Am Strand 5
+S: D-19063 Schwerin
 S: Germany
 
 N: Jan Hubicka

Documentation/00-INDEX

@@ -2,7 +2,7 @@
 This is a brief list of all the files in ./linux/Documentation and what
 they contain. If you add a documentation file, please list it here in
 alphabetical order as well, or risk being hunted down like a rabid dog.
-Please try and keep the descriptions small enough to fit on one line.
+Please keep the descriptions small enough to fit on one line.
 							 Thanks -- Paul G.
 
 Following translations are available on the WWW:
@@ -20,24 +20,33 @@ BUG-HUNTING
 Changes
 	- list of changes that break older software packages.
 CodingStyle
-	- how the boss likes the C code in the kernel to look.
-development-process/
-	- An extended tutorial on how to work with the kernel development
-	  process.
+	- how the maintainers expect the C code in the kernel to look.
 DMA-API.txt
 	- DMA API, pci_ API & extensions for non-consistent memory machines.
+DMA-API-HOWTO.txt
+	- Dynamic DMA mapping Guide
 DMA-ISA-LPC.txt
 	- How to do DMA with ISA (and LPC) devices.
+DMA-attributes.txt
+	- listing of the various possible attributes a DMA region can have
 DocBook/
 	- directory with DocBook templates etc. for kernel documentation.
+EDID/
+	- directory with info on customizing EDID for broken gfx/displays.
 HOWTO
 	- the process and procedures of how to do Linux kernel development.
 IPMI.txt
 	- info on Linux Intelligent Platform Management Interface (IPMI) Driver.
 IRQ-affinity.txt
 	- how to select which CPU(s) handle which interrupt events on SMP.
+IRQ-domain.txt
+	- info on inerrupt numbering and setting up IRQ domains.
 IRQ.txt
 	- description of what an IRQ is.
+Intel-IOMMU.txt
+	- basic info on the Intel IOMMU virtualization support.
+Makefile
+	- some files in Documentation dir are actually sample code to build
 ManagementStyle
 	- how to (attempt to) manage kernel hackers.
 RCU/
@@ -66,10 +75,16 @@ applying-patches.txt
 	- description of various trees and how to apply their patches.
 arm/
 	- directory with info about Linux on the ARM architecture.
+arm64/
+	- directory with info about Linux on the 64 bit ARM architecture.
 atomic_ops.txt
 	- semantics and behavior of atomic and bitmask operations.
 auxdisplay/
 	- misc. LCD driver documentation (cfag12864b, ks0108).
+backlight/
+	- directory with info on controlling backlights in flat panel displays
+bad_memory.txt
+	- how to use kernel parameters to exclude bad RAM regions.
 basic_profiling.txt
 	- basic instructions for those who wants to profile Linux kernel.
 binfmt_misc.txt
@@ -80,8 +95,14 @@ block/
 	- info on the Block I/O (BIO) layer.
 blockdev/
 	- info on block devices & drivers
+braille-console.txt
+	- info on how to use serial devices for Braille support.
+bt8xxgpio.txt
+	- info on how to modify a bt8xx video card for GPIO usage.
 btmrvl.txt
 	- info on Marvell Bluetooth driver usage.
+bus-devices/
+	- directory with info on TI GPMC (General Purpose Memory Controller)
 bus-virt-phys-mapping.txt
 	- how to access I/O mapped memory from within device drivers.
 cachetlb.txt
@@ -90,6 +111,12 @@ cdrom/
 	- directory with information on the CD-ROM drivers that Linux has.
 cgroups/
 	- cgroups features, including cpusets and memory controller.
+circular-buffers.txt
+	- how to make use of the existing circular buffer infrastructure
+clk.txt
+	- info on the common clock framework
+coccinelle.txt
+	- info on how to get and use the Coccinelle code checking tool.
 connector/
 	- docs on the netlink based userspace<->kernel space communication mod.
 console/
@@ -114,40 +141,66 @@ dcdbas.txt
 	- information on the Dell Systems Management Base Driver.
 debugging-modules.txt
 	- some notes on debugging modules after Linux 2.6.3.
+debugging-via-ohci1394.txt
+	- how to use firewire like a hardware debugger memory reader.
 dell_rbu.txt
 	- document demonstrating the use of the Dell Remote BIOS Update driver.
+development-process/
+	- how to work with the mainline kernel development process.
 device-mapper/
 	- directory with info on Device Mapper.
 devices.txt
 	- plain ASCII listing of all the nodes in /dev/ with major minor #'s.
+devicetree/
+	- directory with info on device tree files used by OF/PowerPC/ARM
+digsig.txt
+	-info on the Digital Signature Verification API
+dma-buf-sharing.txt
+	- the DMA Buffer Sharing API Guide
+dmaengine.txt
+	-the DMA Engine API Guide
 dontdiff
 	- file containing a list of files that should never be diff'ed.
 driver-model/
 	- directory with info about Linux driver model.
 dvb/
 	- info on Linux Digital Video Broadcast (DVB) subsystem.
+dynamic-debug-howto.txt
+	- how to use the dynamic debug (dyndbg) feature.
 early-userspace/
 	- info about initramfs, klibc, and userspace early during boot.
 edac.txt
 	- information on EDAC - Error Detection And Correction
 eisa.txt
 	- info on EISA bus support.
+email-clients.txt
+	- info on how to use e-mail to send un-mangled (git) patches.
+extcon/
+	- directory with porting guide for Android kernel switch driver.
 fault-injection/
 	- dir with docs about the fault injection capabilities infrastructure.
 fb/
 	- directory with info on the frame buffer graphics abstraction layer.
-feature-removal-schedule.txt
-	- list of files and features that are going to be removed.
 filesystems/
 	- info on the vfs and the various filesystems that Linux supports.
 firmware_class/
 	- request_firmware() hotplug interface info.
+flexible-arrays.txt
+	- how to make use of flexible sized arrays in linux
 frv/
 	- Fujitsu FR-V Linux documentation.
+futex-requeue-pi.txt
+	- info on requeueing of tasks from a non-PI futex to a PI futex
+gcov.txt
+	- use of GCC's coverage testing tool "gcov" with the Linux kernel
 gpio.txt
 	- overview of GPIO (General Purpose Input/Output) access conventions.
+hid/
+	- directory with information on human interface devices
 highuid.txt
 	- notes on the change from 16 bit to 32 bit user/group IDs.
+hwspinlock.txt
+	- hardware spinlock provides hardware assistance for synchronization
 timers/
 	- info on the timer related topics
 hw_random.txt
@@ -164,10 +217,14 @@ ia64/
 	- directory with info about Linux on Intel 64 bit architecture.
 infiniband/
 	- directory with documents concerning Linux InfiniBand support.
+init.txt
+	- what to do when the kernel can't find the 1st process to run.
 initrd.txt
 	- how to use the RAM disk as an initial/temporary root filesystem.
 input/
 	- info on Linux input device support.
+intel_txt.txt
+	- info on intel Trusted Execution Technology (intel TXT).
 io-mapping.txt
 	- description of io_mapping functions in linux/io-mapping.h
 io_ordering.txt
@@ -184,6 +241,8 @@ isdn/
 	- directory with info on the Linux ISDN support, and supported cards.
 java.txt
 	- info on the in-kernel binary support for Java(tm).
+ja_JP/
+	- directory with Japanese translations of various documents
 kbuild/
 	- directory with info about the kernel build process.
 kdump/
@@ -194,6 +253,12 @@ kernel-docs.txt
 	- listing of various WWW + books that document kernel internals.
 kernel-parameters.txt
 	- summary listing of command line / boot prompt args for the kernel.
+kmemcheck.txt
+	- info on dynamic checker that detects uses of uninitialized memory.
+kmemleak.txt
+	- info on how to make use of the kernel memory leak detection system
+ko_KR/
+	- directory with Korean translations of various documents
 kobject.txt
 	- info of the kobject infrastructure of the Linux kernel.
 kprobes.txt
@@ -210,6 +275,8 @@ local_ops.txt
 	- semantics and behavior of local atomic operations.
 lockdep-design.txt
 	- documentation on the runtime locking correctness validator.
+lockstat.txt
+	- info on collecting statistics on locks (and contention).
 lockup-watchdogs.txt
 	- info on soft and hard lockup detectors (aka nmi_watchdog).
 logo.gif
@@ -222,16 +289,28 @@ magic-number.txt
 	- list of magic numbers used to mark/protect kernel data structures.
 md.txt
 	- info on boot arguments for the multiple devices driver.
+media-framework.txt
+	- info on media framework, its data structures, functions and usage.
 memory-barriers.txt
 	- info on Linux kernel memory barriers.
+memory-devices/
+	- directory with info on parts like the Texas Instruments EMIF driver
 memory-hotplug.txt
 	- Hotpluggable memory support, how to use and current status.
 memory.txt
 	- info on typical Linux memory problems.
+metag/
+	- directory with info about Linux on Meta architecture.
 mips/
 	- directory with info about Linux on MIPS architecture.
+misc-devices/
+	- directory with info about devices using the misc dev subsystem
 mmc/
 	- directory with info about the MMC subsystem
+mn10300/
+	- directory with info about the mn10300 architecture port
+mtd/
+	- directory with info about memory technology devices (flash)
 mono.txt
 	- how to execute Mono-based .NET binaries with the help of BINFMT_MISC.
 mutex-design.txt
@@ -242,6 +321,8 @@ netlabel/
 	- directory with information on the NetLabel subsystem.
 networking/
 	- directory with info on various aspects of networking with Linux.
+nfc/
+	- directory relating info about Near Field Communications support.
 nommu-mmap.txt
 	- documentation about no-mmu memory mapping support.
 numastat.txt
@@ -258,26 +339,46 @@ parport-lowlevel.txt
 	- description and usage of the low level parallel port functions.
 pcmcia/
 	- info on the Linux PCMCIA driver.
+percpu-rw-semaphore.txt
+	- RCU based read-write semaphore optimized for locking for reading
 pi-futex.txt
-	- documentation on lightweight PI-futexes.
+	- documentation on lightweight priority inheritance futexes.
+pinctrl.txt
+	- info on pinctrl subsystem and the PINMUX/PINCONF and drivers
 pnp.txt
 	- Linux Plug and Play documentation.
 power/
 	- directory with info on Linux PCI power management.
 powerpc/
 	- directory with info on using Linux with the PowerPC.
+prctl/
+	- directory with info on the priveledge control subsystem
 preempt-locking.txt
 	- info on locking under a preemptive kernel.
 printk-formats.txt
 	- how to get printk format specifiers right
+pps/
+	- directory with information on the pulse-per-second support
+ptp/
+	- directory with info on support for IEEE 1588 PTP clocks in Linux.
+pwm.txt
+	- info on the pulse width modulation driver subsystem
 ramoops.txt
 	- documentation of the ramoops oops/panic logging module.
+rapidio/
+	- directory with info on RapidIO packet-based fabric interconnect
 rbtree.txt
 	- info on what red-black trees are and what they are for.
+remoteproc.txt
+	- info on how to handle remote processor (e.g. AMP) offloads/usage.
+rfkill.txt
+	- info on the radio frequency kill switch subsystem/support.
 robust-futex-ABI.txt
 	- documentation of the robust futex ABI.
 robust-futexes.txt
 	- a description of what robust futexes are.
+rpmsg.txt
+	- info on the Remote Processor Messaging (rpmsg) Framework
 rt-mutex-design.txt
 	- description of the RealTime mutex implementation design.
 rt-mutex.txt
@@ -302,10 +403,10 @@ sgi-visws.txt
 	- short blurb on the SGI Visual Workstations.
 sh/
 	- directory with info on porting Linux to a new architecture.
+smsc_ece1099.txt
+	-info on the smsc Keyboard Scan Expansion/GPIO Expansion device.
 sound/
 	- directory with info on sound card support.
-sparc/
-	- directory with info on using Linux on Sparc architecture.
 sparse.txt
 	- info on how to obtain and use the sparse tool for typechecking.
 spi/
@@ -316,6 +417,8 @@ stable_api_nonsense.txt
 	- info on why the kernel does not have a stable in-kernel api or abi.
 stable_kernel_rules.txt
 	- rules and procedures for the -stable kernel releases.
+static-keys.txt
+	- info on how static keys allow debug code in hotpaths via patching
 svga.txt
 	- short guide on selecting video modes at boot via VGA BIOS.
 sysfs-rules.txt
@@ -324,27 +427,53 @@ sysctl/
 	- directory with info on the /proc/sys/* files.
 sysrq.txt
 	- info on the magic SysRq key.
-telephony/
-	- directory with info on telephony (e.g. voice over IP) support.
+target/
+	- directory with info on generating TCM v4 fabric .ko modules
+thermal/
+	- directory with information on managing thermal issues (CPU/temp)
+trace/
+	- directory with info on tracing technologies within linux
+unaligned-memory-access.txt
+	- info on how to avoid arch breaking unaligned memory access in code.
 unicode.txt
 	- info on the Unicode character/font mapping used in Linux.
 unshare.txt
 	- description of the Linux unshare system call.
 usb/
 	- directory with info regarding the Universal Serial Bus.
+vDSO/
+	- directory with info regarding virtual dynamic shared objects
+vfio.txt
+	- info on Virtual Function I/O used in guest/hypervisor instances.
+vgaarbiter.txt
+	- info on enable/disable the legacy decoding on different VGA devices
 video-output.txt
 	- sysfs class driver interface to enable/disable a video output device.
 video4linux/
 	- directory with info regarding video/TV/radio cards and linux.
+virtual/
+	- directory with information on the various linux virtualizations.
 vm/
 	- directory with info on the Linux vm code.
+vme_api.txt
+	- file relating info on the VME bus API in linux
 volatile-considered-harmful.txt
 	- Why the "volatile" type class should not be used
 w1/
 	- directory with documents regarding the 1-wire (w1) subsystem.
 watchdog/
 	- how to auto-reboot Linux if it has "fallen and can't get up". ;-)
+wimax/
+	- directory with info about Intel Wireless Wimax Connections
+workqueue.txt
+	- information on the Concurrency Managed Workqueue implementation
 x86/x86_64/
 	- directory with info on Linux support for AMD x86-64 (Hammer) machines.
+xtensa/
+	- directory with documents relating to arch/xtensa port/implementation
+xz.txt
+	- how to make use of the XZ data compression within linux kernel
+zh_CN/
+	- directory with Chinese translations of various documents
 zorro.txt
 	- info on writing drivers for Zorro bus devices found on Amigas.

Documentation/ABI/README

@@ -36,9 +36,6 @@ The different levels of stability are:
 	the kernel, but are marked to be removed at some later point in
 	time.  The description of the interface will document the reason
 	why it is obsolete and when it can be expected to be removed.
-	The file Documentation/feature-removal-schedule.txt may describe
-	some of these interfaces, giving a schedule for when they will
-	be removed.
 
   removed/
 	This directory contains a list of the old interfaces that have

Documentation/ABI/stable/sysfs-class-tpm

@@ -0,0 +1,185 @@
+What:		/sys/class/misc/tpmX/device/
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	tpmdd-devel@lists.sf.net
+Description:	The device/ directory under a specific TPM instance exposes
+		the properties of that TPM chip
+
+
+What:		/sys/class/misc/tpmX/device/active
+Date:		April 2006
+KernelVersion:	2.6.17
+Contact:	tpmdd-devel@lists.sf.net
+Description:	The "active" property prints a '1' if the TPM chip is accepting
+		commands. An inactive TPM chip still contains all the state of
+		an active chip (Storage Root Key, NVRAM, etc), and can be
+		visible to the OS, but will only accept a restricted set of
+		commands. See the TPM Main Specification part 2, Structures,
+		section 17 for more information on which commands are
+		available.
+
+What:		/sys/class/misc/tpmX/device/cancel
+Date:		June 2005
+KernelVersion:	2.6.13
+Contact:	tpmdd-devel@lists.sf.net
+Description:	The "cancel" property allows you to cancel the currently
+		pending TPM command. Writing any value to cancel will call the
+		TPM vendor specific cancel operation.
+
+What:		/sys/class/misc/tpmX/device/caps
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	tpmdd-devel@lists.sf.net
+Description:	The "caps" property contains TPM manufacturer and version info.
+
+		Example output:
+
+		Manufacturer: 0x53544d20
+		TCG version: 1.2
+		Firmware version: 8.16
+
+		Manufacturer is a hex dump of the 4 byte manufacturer info
+		space in a TPM. TCG version shows the TCG TPM spec level that
+		the chip supports. Firmware version is that of the chip and
+		is manufacturer specific.
+
+What:		/sys/class/misc/tpmX/device/durations
+Date:		March 2011
+KernelVersion:	3.1
+Contact:	tpmdd-devel@lists.sf.net
+Description:	The "durations" property shows the 3 vendor-specific values
+		used to wait for a short, medium and long TPM command. All
+		TPM commands are categorized as short, medium or long in
+		execution time, so that the driver doesn't have to wait
+		any longer than necessary before starting to poll for a
+		result.
+
+		Example output:
+
+		3015000 4508000 180995000 [original]
+
+		Here the short, medium and long durations are displayed in
+		usecs. "[original]" indicates that the values are displayed
+		unmodified from when they were queried from the chip.
+		Durations can be modified in the case where a buggy chip
+		reports them in msec instead of usec and they need to be
+		scaled to be displayed in usecs. In this case "[adjusted]"
+		will be displayed in place of "[original]".
+
+What:		/sys/class/misc/tpmX/device/enabled
+Date:		April 2006
+KernelVersion:	2.6.17
+Contact:	tpmdd-devel@lists.sf.net
+Description:	The "enabled" property prints a '1' if the TPM chip is enabled,
+		meaning that it should be visible to the OS. This property
+		may be visible but produce a '0' after some operation that
+		disables the TPM.
+
+What:		/sys/class/misc/tpmX/device/owned
+Date:		April 2006
+KernelVersion:	2.6.17
+Contact:	tpmdd-devel@lists.sf.net
+Description:	The "owned" property produces a '1' if the TPM_TakeOwnership
+		ordinal has been executed successfully in the chip. A '0'
+		indicates that ownership hasn't been taken.
+
+What:		/sys/class/misc/tpmX/device/pcrs
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	tpmdd-devel@lists.sf.net
+Description:	The "pcrs" property will dump the current value of all Platform
+		Configuration Registers in the TPM. Note that since these
+		values may be constantly changing, the output is only valid
+		for a snapshot in time.
+
+		Example output:
+
+		PCR-00: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75
+		PCR-01: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75
+		PCR-02: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75
+		PCR-03: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75
+		PCR-04: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75
+		...
+
+		The number of PCRs and hex bytes needed to represent a PCR
+		value will vary depending on TPM chip version. For TPM 1.1 and
+		1.2 chips, PCRs represent SHA-1 hashes, which are 20 bytes
+		long. Use the "caps" property to determine TPM version.
+
+What:		/sys/class/misc/tpmX/device/pubek
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	tpmdd-devel@lists.sf.net
+Description:	The "pubek" property will return the TPM's public endorsement
+		key if possible. If the TPM has had ownership established and
+		is version 1.2, the pubek will not be available without the
+		owner's authorization. Since the TPM driver doesn't store any
+		secrets, it can't authorize its own request for the pubek,
+		making it unaccessible. The public endorsement key is gener-
+		ated at TPM menufacture time and exists for the life of the
+		chip.
+
+		Example output:
+
+		Algorithm: 00 00 00 01
+		Encscheme: 00 03
+		Sigscheme: 00 01
+		Parameters: 00 00 08 00 00 00 00 02 00 00 00 00
+		Modulus length: 256
+		Modulus:
+		B4 76 41 82 C9 20 2C 10 18 40 BC 8B E5 44 4C 6C
+		3A B2 92 0C A4 9B 2A 83 EB 5C 12 85 04 48 A0 B6
+		1E E4 81 84 CE B2 F2 45 1C F0 85 99 61 02 4D EB
+		86 C4 F7 F3 29 60 52 93 6B B2 E5 AB 8B A9 09 E3
+		D7 0E 7D CA 41 BF 43 07 65 86 3C 8C 13 7A D0 8B
+		82 5E 96 0B F8 1F 5F 34 06 DA A2 52 C1 A9 D5 26
+		0F F4 04 4B D9 3F 2D F2 AC 2F 74 64 1F 8B CD 3E
+		1E 30 38 6C 70 63 69 AB E2 50 DF 49 05 2E E1 8D
+		6F 78 44 DA 57 43 69 EE 76 6C 38 8A E9 8E A3 F0
+		A7 1F 3C A8 D0 12 15 3E CA 0E BD FA 24 CD 33 C6
+		47 AE A4 18 83 8E 22 39 75 93 86 E6 FD 66 48 B6
+		10 AD 94 14 65 F9 6A 17 78 BD 16 53 84 30 BF 70
+		E0 DC 65 FD 3C C6 B0 1E BF B9 C1 B5 6C EF B1 3A
+		F8 28 05 83 62 26 11 DC B4 6B 5A 97 FF 32 26 B6
+		F7 02 71 CF 15 AE 16 DD D1 C1 8E A8 CF 9B 50 7B
+		C3 91 FF 44 1E CF 7C 39 FE 17 77 21 20 BD CE 9B
+
+		Possible values:
+
+		Algorithm:	TPM_ALG_RSA			(1)
+		Encscheme:	TPM_ES_RSAESPKCSv15		(2)
+				TPM_ES_RSAESOAEP_SHA1_MGF1	(3)
+		Sigscheme:	TPM_SS_NONE			(1)
+		Parameters, a byte string of 3 u32 values:
+			Key Length (bits):	00 00 08 00	(2048)
+			Num primes:		00 00 00 02	(2)
+			Exponent Size:		00 00 00 00	(0 means the
+								 default exp)
+		Modulus Length: 256 (bytes)
+		Modulus:	The 256 byte Endorsement Key modulus
+
+What:		/sys/class/misc/tpmX/device/temp_deactivated
+Date:		April 2006
+KernelVersion:	2.6.17
+Contact:	tpmdd-devel@lists.sf.net
+Description:	The "temp_deactivated" property returns a '1' if the chip has
+		been temporarily dectivated, usually until the next power
+		cycle. Whether a warm boot (reboot) will clear a TPM chip
+		from a temp_deactivated state is platform specific.
+
+What:		/sys/class/misc/tpmX/device/timeouts
+Date:		March 2011
+KernelVersion:	3.1
+Contact:	tpmdd-devel@lists.sf.net
+Description:	The "timeouts" property shows the 4 vendor-specific values
+		for the TPM's interface spec timeouts. The use of these
+		timeouts is defined by the TPM interface spec that the chip
+		conforms to.
+
+		Example output:
+
+		750000 750000 750000 750000 [original]
+
+		The four timeout values are shown in usecs, with a trailing
+		"[original]" or "[adjusted]" depending on whether the values
+		were scaled by the driver to be reported in usec from msecs.

Documentation/ABI/stable/sysfs-devices-node

@@ -1,7 +1,101 @@
+What:		/sys/devices/system/node/possible
+Date:		October 2002
+Contact:	Linux Memory Management list <linux-mm@kvack.org>
+Description:
+		Nodes that could be possibly become online at some point.
+
+What:		/sys/devices/system/node/online
+Date:		October 2002
+Contact:	Linux Memory Management list <linux-mm@kvack.org>
+Description:
+		Nodes that are online.
+
+What:		/sys/devices/system/node/has_normal_memory
+Date:		October 2002
+Contact:	Linux Memory Management list <linux-mm@kvack.org>
+Description:
+		Nodes that have regular memory.
+
+What:		/sys/devices/system/node/has_cpu
+Date:		October 2002
+Contact:	Linux Memory Management list <linux-mm@kvack.org>
+Description:
+		Nodes that have one or more CPUs.
+
+What:		/sys/devices/system/node/has_high_memory
+Date:		October 2002
+Contact:	Linux Memory Management list <linux-mm@kvack.org>
+Description:
+		Nodes that have regular or high memory.
+		Depends on CONFIG_HIGHMEM.
+
 What:		/sys/devices/system/node/nodeX
 Date:		October 2002
 Contact:	Linux Memory Management list <linux-mm@kvack.org>
 Description:
 		When CONFIG_NUMA is enabled, this is a directory containing
 		information on node X such as what CPUs are local to the
-		node.
+		node. Each file is detailed next.
+
+What:		/sys/devices/system/node/nodeX/cpumap
+Date:		October 2002
+Contact:	Linux Memory Management list <linux-mm@kvack.org>
+Description:
+		The node's cpumap.
+
+What:		/sys/devices/system/node/nodeX/cpulist
+Date:		October 2002
+Contact:	Linux Memory Management list <linux-mm@kvack.org>
+Description:
+		The CPUs associated to the node.
+
+What:		/sys/devices/system/node/nodeX/meminfo
+Date:		October 2002
+Contact:	Linux Memory Management list <linux-mm@kvack.org>
+Description:
+		Provides information about the node's distribution and memory
+		utilization. Similar to /proc/meminfo, see Documentation/filesystems/proc.txt
+
+What:		/sys/devices/system/node/nodeX/numastat
+Date:		October 2002
+Contact:	Linux Memory Management list <linux-mm@kvack.org>
+Description:
+		The node's hit/miss statistics, in units of pages.
+		See Documentation/numastat.txt
+
+What:		/sys/devices/system/node/nodeX/distance
+Date:		October 2002
+Contact:	Linux Memory Management list <linux-mm@kvack.org>
+Description:
+		Distance between the node and all the other nodes
+		in the system.
+
+What:		/sys/devices/system/node/nodeX/vmstat
+Date:		October 2002
+Contact:	Linux Memory Management list <linux-mm@kvack.org>
+Description:
+		The node's zoned virtual memory statistics.
+		This is a superset of numastat.
+
+What:		/sys/devices/system/node/nodeX/compact
+Date:		February 2010
+Contact:	Mel Gorman <mel@csn.ul.ie>
+Description:
+		When this file is written to, all memory within that node
+		will be compacted. When it completes, memory will be freed
+		into blocks which have as many contiguous pages as possible
+
+What:		/sys/devices/system/node/nodeX/scan_unevictable_pages
+Date:		October 2008
+Contact:	Lee Schermerhorn <lee.schermerhorn@hp.com>
+Description:
+		When set, it triggers scanning the node's unevictable lists
+		and move any pages that have become evictable onto the respective
+		zone's inactive list. See mm/vmscan.c
+
+What:		/sys/devices/system/node/nodeX/hugepages/hugepages-<size>/
+Date:		December 2009
+Contact:	Lee Schermerhorn <lee.schermerhorn@hp.com>
+Description:
+		The node's huge page size control/query attributes.
+		See Documentation/vm/hugetlbpage.txt

Documentation/ABI/stable/sysfs-driver-ib_srp

@@ -0,0 +1,156 @@
+What:		/sys/class/infiniband_srp/srp-<hca>-<port_number>/add_target
+Date:		January 2, 2006
+KernelVersion:	2.6.15
+Contact:	linux-rdma@vger.kernel.org
+Description:	Interface for making ib_srp connect to a new target.
+		One can request ib_srp to connect to a new target by writing
+		a comma-separated list of login parameters to this sysfs
+		attribute. The supported parameters are:
+		* id_ext, a 16-digit hexadecimal number specifying the eight
+		  byte identifier extension in the 16-byte SRP target port
+		  identifier. The target port identifier is sent by ib_srp
+		  to the target in the SRP_LOGIN_REQ request.
+		* ioc_guid, a 16-digit hexadecimal number specifying the eight
+		  byte I/O controller GUID portion of the 16-byte target port
+		  identifier.
+		* dgid, a 32-digit hexadecimal number specifying the
+		  destination GID.
+		* pkey, a four-digit hexadecimal number specifying the
+		  InfiniBand partition key.
+		* service_id, a 16-digit hexadecimal number specifying the
+		  InfiniBand service ID used to establish communication with
+		  the SRP target. How to find out the value of the service ID
+		  is specified in the documentation of the SRP target.
+		* max_sect, a decimal number specifying the maximum number of
+		  512-byte sectors to be transferred via a single SCSI command.
+		* max_cmd_per_lun, a decimal number specifying the maximum
+		  number of outstanding commands for a single LUN.
+		* io_class, a hexadecimal number specifying the SRP I/O class.
+		  Must be either 0xff00 (rev 10) or 0x0100 (rev 16a). The I/O
+		  class defines the format of the SRP initiator and target
+		  port identifiers.
+		* initiator_ext, a 16-digit hexadecimal number specifying the
+		  identifier extension portion of the SRP initiator port
+		  identifier. This data is sent by the initiator to the target
+		  in the SRP_LOGIN_REQ request.
+		* cmd_sg_entries, a number in the range 1..255 that specifies
+		  the maximum number of data buffer descriptors stored in the
+		  SRP_CMD information unit itself. With allow_ext_sg=0 the
+		  parameter cmd_sg_entries defines the maximum S/G list length
+		  for a single SRP_CMD, and commands whose S/G list length
+		  exceeds this limit after S/G list collapsing will fail.
+		* allow_ext_sg, whether ib_srp is allowed to include a partial
+		  memory descriptor list in an SRP_CMD instead of the entire
+		  list. If a partial memory descriptor list has been included
+		  in an SRP_CMD the remaining memory descriptors are
+		  communicated from initiator to target via an additional RDMA
+		  transfer. Setting allow_ext_sg to 1 increases the maximum
+		  amount of data that can be transferred between initiator and
+		  target via a single SCSI command. Since not all SRP target
+		  implementations support partial memory descriptor lists the
+		  default value for this option is 0.
+		* sg_tablesize, a number in the range 1..2048 specifying the
+		  maximum S/G list length the SCSI layer is allowed to pass to
+		  ib_srp. Specifying a value that exceeds cmd_sg_entries is
+		  only safe with partial memory descriptor list support enabled
+		  (allow_ext_sg=1).
+
+What:		/sys/class/infiniband_srp/srp-<hca>-<port_number>/ibdev
+Date:		January 2, 2006
+KernelVersion:	2.6.15
+Contact:	linux-rdma@vger.kernel.org
+Description:	HCA name (<hca>).
+
+What:		/sys/class/infiniband_srp/srp-<hca>-<port_number>/port
+Date:		January 2, 2006
+KernelVersion:	2.6.15
+Contact:	linux-rdma@vger.kernel.org
+Description:	HCA port number (<port_number>).
+
+What:		/sys/class/scsi_host/host<n>/allow_ext_sg
+Date:		May 19, 2011
+KernelVersion:	2.6.39
+Contact:	linux-rdma@vger.kernel.org
+Description:	Whether ib_srp is allowed to include a partial memory
+		descriptor list in an SRP_CMD when communicating with an SRP
+		target.
+
+What:		/sys/class/scsi_host/host<n>/cmd_sg_entries
+Date:		May 19, 2011
+KernelVersion:	2.6.39
+Contact:	linux-rdma@vger.kernel.org
+Description:	Maximum number of data buffer descriptors that may be sent to
+		the target in a single SRP_CMD request.
+
+What:		/sys/class/scsi_host/host<n>/dgid
+Date:		June 17, 2006
+KernelVersion:	2.6.17
+Contact:	linux-rdma@vger.kernel.org
+Description:	InfiniBand destination GID used for communication with the SRP
+		target. Differs from orig_dgid if port redirection has happened.
+
+What:		/sys/class/scsi_host/host<n>/id_ext
+Date:		June 17, 2006
+KernelVersion:	2.6.17
+Contact:	linux-rdma@vger.kernel.org
+Description:	Eight-byte identifier extension portion of the 16-byte target
+		port identifier.
+
+What:		/sys/class/scsi_host/host<n>/ioc_guid
+Date:		June 17, 2006
+KernelVersion:	2.6.17
+Contact:	linux-rdma@vger.kernel.org
+Description:	Eight-byte I/O controller GUID portion of the 16-byte target
+		port identifier.
+
+What:		/sys/class/scsi_host/host<n>/local_ib_device
+Date:		November 29, 2006
+KernelVersion:	2.6.19
+Contact:	linux-rdma@vger.kernel.org
+Description:	Name of the InfiniBand HCA used for communicating with the
+		SRP target.
+
+What:		/sys/class/scsi_host/host<n>/local_ib_port
+Date:		November 29, 2006
+KernelVersion:	2.6.19
+Contact:	linux-rdma@vger.kernel.org
+Description:	Number of the HCA port used for communicating with the
+		SRP target.
+
+What:		/sys/class/scsi_host/host<n>/orig_dgid
+Date:		June 17, 2006
+KernelVersion:	2.6.17
+Contact:	linux-rdma@vger.kernel.org
+Description:	InfiniBand destination GID specified in the parameters
+		written to the add_target sysfs attribute.
+
+What:		/sys/class/scsi_host/host<n>/pkey
+Date:		June 17, 2006
+KernelVersion:	2.6.17
+Contact:	linux-rdma@vger.kernel.org
+Description:	A 16-bit number representing the InfiniBand partition key used
+		for communication with the SRP target.
+
+What:		/sys/class/scsi_host/host<n>/req_lim
+Date:		October 20, 2010
+KernelVersion:	2.6.36
+Contact:	linux-rdma@vger.kernel.org
+Description:	Number of requests ib_srp can send to the target before it has
+		to wait for more credits. For more information see also the
+		SRP credit algorithm in the SRP specification.
+
+What:		/sys/class/scsi_host/host<n>/service_id
+Date:		June 17, 2006
+KernelVersion:	2.6.17
+Contact:	linux-rdma@vger.kernel.org
+Description:	InfiniBand service ID used for establishing communication with
+		the SRP	target.
+
+What:		/sys/class/scsi_host/host<n>/zero_req_lim
+Date:		September 20, 2006
+KernelVersion:	2.6.18
+Contact:	linux-rdma@vger.kernel.org
+Description:	Number of times the initiator had to wait before sending a
+		request to the target because it ran out of credits. For more
+		information see also the SRP credit algorithm in the SRP
+		specification.

Documentation/ABI/stable/sysfs-transport-srp

@@ -0,0 +1,19 @@
+What:		/sys/class/srp_remote_ports/port-<h>:<n>/delete
+Date:		June 1, 2012
+KernelVersion:	3.7
+Contact:	linux-scsi@vger.kernel.org, linux-rdma@vger.kernel.org
+Description:	Instructs an SRP initiator to disconnect from a target and to
+		remove all LUNs imported from that target.
+
+What:		/sys/class/srp_remote_ports/port-<h>:<n>/port_id
+Date:		June 27, 2007
+KernelVersion:	2.6.24
+Contact:	linux-scsi@vger.kernel.org
+Description:	16-byte local SRP port identifier in hexadecimal format. An
+		example: 4c:49:4e:55:58:20:56:49:4f:00:00:00:00:00:00:00.
+
+What:		/sys/class/srp_remote_ports/port-<h>:<n>/roles
+Date:		June 27, 2007
+KernelVersion:	2.6.24
+Contact:	linux-scsi@vger.kernel.org
+Description:	Role of the remote port. Either "SRP Initiator" or "SRP Target".

Documentation/ABI/testing/ima_policy

@@ -18,17 +18,21 @@ Description:
 		rule format: action [condition ...]
 
 		action: measure | dont_measure | appraise | dont_appraise | audit
-		condition:= base | lsm
-			base:	[[func=] [mask=] [fsmagic=] [uid=] [fowner]]
+		condition:= base | lsm  [option]
+			base:	[[func=] [mask=] [fsmagic=] [fsuuid=] [uid=]
+				 [fowner]]
 			lsm:	[[subj_user=] [subj_role=] [subj_type=]
 				 [obj_user=] [obj_role=] [obj_type=]]
+			option:	[[appraise_type=]]
 
-		base: 	func:= [BPRM_CHECK][FILE_MMAP][FILE_CHECK]
+		base: 	func:= [BPRM_CHECK][MMAP_CHECK][FILE_CHECK][MODULE_CHECK]
 			mask:= [MAY_READ] [MAY_WRITE] [MAY_APPEND] [MAY_EXEC]
 			fsmagic:= hex value
+			fsuuid:= file system UUID (e.g 8bcbe394-4f13-4144-be8e-5aa9ea2ce2f6)
 			uid:= decimal value
 			fowner:=decimal value
 		lsm:  	are LSM specific
+		option:	appraise_type:= [imasig]
 
 		default policy:
 			# PROC_SUPER_MAGIC
@@ -53,6 +57,7 @@ Description:
 			measure func=BPRM_CHECK
 			measure func=FILE_MMAP mask=MAY_EXEC
 			measure func=FILE_CHECK mask=MAY_READ uid=0
+			measure func=MODULE_CHECK uid=0
 			appraise fowner=0
 
 		The default policy measures all executables in bprm_check,

Documentation/ABI/testing/pstore

@@ -1,4 +1,4 @@
-Where:		/dev/pstore/...
+Where:		/sys/fs/pstore/... (or /dev/pstore/...)
 Date:		March 2011
 Kernel Version: 2.6.39
 Contact:	tony.luck@intel.com
@@ -11,9 +11,9 @@ Description:	Generic interface to platform dependent persistent storage.
 		of the console log is captured, but other interesting
 		data can also be saved.
 
-		# mount -t pstore -o kmsg_bytes=8000 - /dev/pstore
+		# mount -t pstore -o kmsg_bytes=8000 - /sys/fs/pstore
 
-		$ ls -l /dev/pstore
+		$ ls -l /sys/fs/pstore/
 		total 0
 		-r--r--r-- 1 root root 7896 Nov 30 15:38 dmesg-erst-1
 
@@ -27,9 +27,9 @@ Description:	Generic interface to platform dependent persistent storage.
 		the file will signal to the underlying persistent storage
 		device that it can reclaim the space for later re-use.
 
-		$ rm /dev/pstore/dmesg-erst-1
+		$ rm /sys/fs/pstore/dmesg-erst-1
 
-		The expectation is that all files in /dev/pstore
+		The expectation is that all files in /sys/fs/pstore/
 		will be saved elsewhere and erased from persistent store
 		soon after boot to free up space ready for the next
 		catastrophe.

Documentation/ABI/testing/sysfs-bus-event_source-devices-events

@@ -0,0 +1,62 @@
+What:		/sys/devices/cpu/events/
+		/sys/devices/cpu/events/branch-misses
+		/sys/devices/cpu/events/cache-references
+		/sys/devices/cpu/events/cache-misses
+		/sys/devices/cpu/events/stalled-cycles-frontend
+		/sys/devices/cpu/events/branch-instructions
+		/sys/devices/cpu/events/stalled-cycles-backend
+		/sys/devices/cpu/events/instructions
+		/sys/devices/cpu/events/cpu-cycles
+
+Date:		2013/01/08
+
+Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
+
+Description:	Generic performance monitoring events
+
+		A collection of performance monitoring events that may be
+		supported by many/most CPUs. These events can be monitored
+		using the 'perf(1)' tool.
+
+		The contents of each file would look like:
+
+			event=0xNNNN
+
+		where 'N' is a hex digit and the number '0xNNNN' shows the
+		"raw code" for the perf event identified by the file's
+		"basename".
+
+
+What: 		/sys/devices/cpu/events/PM_LD_MISS_L1
+		/sys/devices/cpu/events/PM_LD_REF_L1
+		/sys/devices/cpu/events/PM_CYC
+		/sys/devices/cpu/events/PM_BRU_FIN
+		/sys/devices/cpu/events/PM_GCT_NOSLOT_CYC
+		/sys/devices/cpu/events/PM_BRU_MPRED
+		/sys/devices/cpu/events/PM_INST_CMPL
+		/sys/devices/cpu/events/PM_CMPLU_STALL
+
+Date:		2013/01/08
+
+Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
+		Linux Powerpc mailing list <linuxppc-dev@ozlabs.org>
+
+Description:	POWER-systems specific performance monitoring events
+
+		A collection of performance monitoring events that may be
+		supported by the POWER CPU. These events can be monitored
+		using the 'perf(1)' tool.
+
+		These events may not be supported by other CPUs.
+
+		The contents of each file would look like:
+
+			event=0xNNNN
+
+		where 'N' is a hex digit and the number '0xNNNN' shows the
+		"raw code" for the perf event identified by the file's
+		"basename".
+
+		Further, multiple terms like 'event=0xNNNN' can be specified
+		and separated with comma. All available terms are defined in
+		the /sys/bus/event_source/devices/<dev>/format file.

Documentation/ABI/testing/sysfs-bus-fcoe

@@ -1,14 +1,53 @@
-What:		/sys/bus/fcoe/ctlr_X
+What:		/sys/bus/fcoe/
+Date:		August 2012
+KernelVersion:	TBD
+Contact:	Robert Love <robert.w.love@intel.com>, devel@open-fcoe.org
+Description:	The FCoE bus. Attributes in this directory are control interfaces.
+Attributes:
+
+	ctlr_create: 'FCoE Controller' instance creation interface. Writing an
+		     <ifname> to this file will allocate and populate sysfs with a
+		     fcoe_ctlr_device (ctlr_X). The user can then configure any
+		     per-port settings and finally write to the fcoe_ctlr_device's
+		     'start' attribute to begin the kernel's discovery and login
+		     process.
+
+	ctlr_destroy: 'FCoE Controller' instance removal interface. Writing a
+		       fcoe_ctlr_device's sysfs name to this file will log the
+		       fcoe_ctlr_device out of the fabric or otherwise connected
+		       FCoE devices. It will also free all kernel memory allocated
+		       for this fcoe_ctlr_device and any structures associated
+		       with it, this includes the scsi_host.
+
+What:		/sys/bus/fcoe/devices/ctlr_X
 Date:		March 2012
 KernelVersion:	TBD
 Contact:	Robert Love <robert.w.love@intel.com>, devel@open-fcoe.org
-Description:	'FCoE Controller' instances on the fcoe bus
+Description:	'FCoE Controller' instances on the fcoe bus.
+		The FCoE Controller now has a three stage creation process.
+		1) Write interface name to ctlr_create 2) Configure the FCoE
+		Controller (ctlr_X) 3) Enable the FCoE Controller to begin
+		discovery and login. The FCoE Controller is destroyed by
+		writing it's name, i.e. ctlr_X to the ctlr_delete file.
+
 Attributes:
 
 	fcf_dev_loss_tmo: Device loss timeout peroid (see below). Changing
 			  this value will change the dev_loss_tmo for all
 			  FCFs discovered by this controller.
 
+	mode:		  Display or change the FCoE Controller's mode. Possible
+			  modes are 'Fabric' and 'VN2VN'. If a FCoE Controller
+			  is started in 'Fabric' mode then FIP FCF discovery is
+			  initiated and ultimately a fabric login is attempted.
+			  If a FCoE Controller is started in 'VN2VN' mode then
+			  FIP VN2VN discovery and login is performed. A FCoE
+			  Controller only supports one mode at a time.
+
+	enabled:	  Whether an FCoE controller is enabled or disabled.
+			  0 if disabled, 1 if enabled. Writing either 0 or 1
+			  to this file will enable or disable the FCoE controller.
+
 	lesb/link_fail:   Link Error Status Block (LESB) link failure count.
 
 	lesb/vlink_fail:  Link Error Status Block (LESB) virtual link
@@ -26,7 +65,7 @@ Attributes:
 
 Notes: ctlr_X (global increment starting at 0)
 
-What:		/sys/bus/fcoe/fcf_X
+What:		/sys/bus/fcoe/devices/fcf_X
 Date:		March 2012
 KernelVersion:	TBD
 Contact:	Robert Love <robert.w.love@intel.com>, devel@open-fcoe.org

Documentation/ABI/testing/sysfs-bus-iio-mpu6050

@@ -0,0 +1,13 @@
+What:           /sys/bus/iio/devices/iio:deviceX/in_gyro_matrix
+What:           /sys/bus/iio/devices/iio:deviceX/in_accel_matrix
+What:           /sys/bus/iio/devices/iio:deviceX/in_magn_matrix
+KernelVersion:  3.4.0
+Contact:        linux-iio@vger.kernel.org
+Description:
+		This is mounting matrix for motion sensors. Mounting matrix
+		is a 3x3 unitary matrix. A typical mounting matrix would look like
+		[0, 1, 0; 1, 0, 0; 0, 0, -1]. Using this information, it would be
+		easy to tell the relative positions among sensors as well as their
+		positions relative to the board that holds these sensors. Identity matrix
+		[1, 0, 0; 0, 1, 0; 0, 0, 1] means sensor chip and device are perfectly
+		aligned with each other. All axes are exactly the same.

Documentation/ABI/testing/sysfs-bus-rbd

@@ -70,6 +70,10 @@ snap_*
 
 	A directory per each snapshot
 
+parent
+
+	Information identifying the pool, image, and snapshot id for
+	the parent image in a layered rbd image (format 2 only).
 
 Entries under /sys/bus/rbd/devices/<dev-id>/snap_<snap-name>
 -------------------------------------------------------------

Documentation/ABI/testing/sysfs-bus-usb

@@ -227,3 +227,12 @@ Contact:	Lan Tianyu <tianyu.lan@intel.com>
 Description:
 		The /sys/bus/usb/devices/.../(hub interface)/portX
 		is usb port device's sysfs directory.
+
+What:		/sys/bus/usb/devices/.../(hub interface)/portX/connect_type
+Date:		January 2013
+Contact:	Lan Tianyu <tianyu.lan@intel.com>
+Description:
+		Some platforms provide usb port connect types through ACPI.
+		This attribute is to expose these information to user space.
+		The file will read "hotplug", "wired" and "not used" if the
+		information is available, and "unknown" otherwise.

Documentation/ABI/testing/sysfs-class-bdi

@@ -48,3 +48,8 @@ max_ratio (read-write)
 	most of the write-back cache.  For example in case of an NFS
 	mount that is prone to get stuck, or a FUSE mount which cannot
 	be trusted to play fair.
+
+stable_pages_required (read-only)
+
+	If set, the backing device requires that all pages comprising a write
+	request must not be changed until writeout is complete.

Documentation/ABI/testing/sysfs-devices-node

@@ -1,7 +0,0 @@
-What:		/sys/devices/system/node/nodeX/compact
-Date:		February 2010
-Contact:	Mel Gorman <mel@csn.ul.ie>
-Description:
-		When this file is written to, all memory within that node
-		will be compacted. When it completes, memory will be freed
-		into blocks which have as many contiguous pages as possible

Documentation/ABI/testing/sysfs-devices-power_resources_D0

@@ -0,0 +1,13 @@
+What:		/sys/devices/.../power_resources_D0/
+Date:		January 2013
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		The /sys/devices/.../power_resources_D0/ directory is only
+		present for device objects representing ACPI device nodes that
+		use ACPI power resources for power management.
+
+		If present, it contains symbolic links to device directories
+		representing ACPI power resources that need to be turned on for
+		the given device node to be in ACPI power state D0.  The names
+		of the links are the same as the names of the directories they
+		point to.

Documentation/ABI/testing/sysfs-devices-power_resources_D1

@@ -0,0 +1,14 @@
+What:		/sys/devices/.../power_resources_D1/
+Date:		January 2013
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		The /sys/devices/.../power_resources_D1/ directory is only
+		present for device objects representing ACPI device nodes that
+		use ACPI power resources for power management and support ACPI
+		power state D1.
+
+		If present, it contains symbolic links to device directories
+		representing ACPI power resources that need to be turned on for
+		the given device node to be in ACPI power state D1.  The names
+		of the links are the same as the names of the directories they
+		point to.

Documentation/ABI/testing/sysfs-devices-power_resources_D2

@@ -0,0 +1,14 @@
+What:		/sys/devices/.../power_resources_D2/
+Date:		January 2013
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		The /sys/devices/.../power_resources_D2/ directory is only
+		present for device objects representing ACPI device nodes that
+		use ACPI power resources for power management and support ACPI
+		power state D2.
+
+		If present, it contains symbolic links to device directories
+		representing ACPI power resources that need to be turned on for
+		the given device node to be in ACPI power state D2.  The names
+		of the links are the same as the names of the directories they
+		point to.

Documentation/ABI/testing/sysfs-devices-power_resources_D3hot

@@ -0,0 +1,14 @@
+What:		/sys/devices/.../power_resources_D3hot/
+Date:		January 2013
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		The /sys/devices/.../power_resources_D3hot/ directory is only
+		present for device objects representing ACPI device nodes that
+		use ACPI power resources for power management and support ACPI
+		power state D3hot.
+
+		If present, it contains symbolic links to device directories
+		representing ACPI power resources that need to be turned on for
+		the given device node to be in ACPI power state D3hot.  The
+		names of the links are the same as the names of the directories
+		they point to.

Documentation/ABI/testing/sysfs-devices-power_state

@@ -0,0 +1,20 @@
+What:		/sys/devices/.../power_state
+Date:		January 2013
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		The /sys/devices/.../power_state attribute is only present for
+		device objects representing ACPI device nodes that provide power
+		management methods.
+
+		If present, it contains a string representing the current ACPI
+		power state of the given device node.  Its possible values,
+		"D0", "D1", "D2", "D3hot", and "D3cold", reflect the power state
+		names defined by the ACPI specification (ACPI 4 and above).
+
+		If the device node uses shared ACPI power resources, this state
+		determines a list of power resources required not to be turned
+		off.  However, some power resources needed by the device node in
+		higher-power (lower-number) states may also be ON because of
+		some other devices using them at the moment.
+
+		This attribute is read-only.

Documentation/ABI/testing/sysfs-devices-real_power_state

@@ -0,0 +1,23 @@
+What:		/sys/devices/.../real_power_state
+Date:		January 2013
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		The /sys/devices/.../real_power_state attribute is only present
+		for device objects representing ACPI device nodes that provide
+		power management methods and use ACPI power resources for power
+		management.
+
+		If present, it contains a string representing the real ACPI
+		power state of the given device node as returned by the _PSC
+		control method or inferred from the configuration of power
+		resources.  Its possible values, "D0", "D1", "D2", "D3hot", and
+		"D3cold", reflect the power state names defined by the ACPI
+		specification (ACPI 4 and above).
+
+		In some situations the value of this attribute may be different
+		from the value of the /sys/devices/.../power_state attribute for
+		the same device object.  If that happens, some shared power
+		resources used by the device node are only ON because of some
+		other devices using them at the moment.
+
+		This attribute is read-only.

Documentation/ABI/testing/sysfs-devices-resource_in_use

@@ -0,0 +1,12 @@
+What:		/sys/devices/.../resource_in_use
+Date:		January 2013
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		The /sys/devices/.../resource_in_use attribute is only present
+		for device objects representing ACPI power resources.
+
+		If present, it contains a number (0 or 1) representing the
+		current status of the given power resource (0 means that the
+		resource is not in use and therefore it has been turned off).
+
+		This attribute is read-only.

Documentation/ABI/testing/sysfs-devices-system-cpu

@@ -67,20 +67,6 @@ Description:	Discover NUMA node a CPU belongs to
 		/sys/devices/system/cpu/cpu42/node2 -> ../../node/node2
 
 
-What:		/sys/devices/system/cpu/cpu#/node
-Date:		October 2009
-Contact:	Linux memory management mailing list <linux-mm@kvack.org>
-Description:	Discover NUMA node a CPU belongs to
-
-		When CONFIG_NUMA is enabled, a symbolic link that points
-		to the corresponding NUMA node directory.
-
-		For example, the following symlink is created for cpu42
-		in NUMA node 2:
-
-		/sys/devices/system/cpu/cpu42/node2 -> ../../node/node2
-
-
 What:		/sys/devices/system/cpu/cpu#/topology/core_id
 		/sys/devices/system/cpu/cpu#/topology/core_siblings
 		/sys/devices/system/cpu/cpu#/topology/core_siblings_list

Documentation/ABI/testing/sysfs-driver-hid-srws1

@@ -0,0 +1,21 @@
+What:		/sys/class/leds/SRWS1::<serial>::RPM1
+What:		/sys/class/leds/SRWS1::<serial>::RPM2
+What:		/sys/class/leds/SRWS1::<serial>::RPM3
+What:		/sys/class/leds/SRWS1::<serial>::RPM4
+What:		/sys/class/leds/SRWS1::<serial>::RPM5
+What:		/sys/class/leds/SRWS1::<serial>::RPM6
+What:		/sys/class/leds/SRWS1::<serial>::RPM7
+What:		/sys/class/leds/SRWS1::<serial>::RPM8
+What:		/sys/class/leds/SRWS1::<serial>::RPM9
+What:		/sys/class/leds/SRWS1::<serial>::RPM10
+What:		/sys/class/leds/SRWS1::<serial>::RPM11
+What:		/sys/class/leds/SRWS1::<serial>::RPM12
+What:		/sys/class/leds/SRWS1::<serial>::RPM13
+What:		/sys/class/leds/SRWS1::<serial>::RPM14
+What:		/sys/class/leds/SRWS1::<serial>::RPM15
+What:		/sys/class/leds/SRWS1::<serial>::RPMALL
+Date:		Jan 2013
+KernelVersion:	3.9
+Contact:	Simon Wood <simon@mungewell.org>
+Description:	Provides a control for turning on/off the LEDs which form
+		an RPM meter on the front of the controller

Documentation/ABI/testing/sysfs-driver-hid-thingm

@@ -0,0 +1,23 @@
+What:		/sys/class/leds/blink1::<serial>/rgb
+Date:		January 2013
+Contact:	Vivien Didelot <vivien.didelot@savoirfairelinux.com>
+Description:	The ThingM blink1 is an USB RGB LED. The color notation is
+		3-byte hexadecimal. Read this attribute to get the last set
+		color. Write the 24-bit hexadecimal color to change the current
+		LED color. The default color is full white (0xFFFFFF).
+		For instance, set the color to green with: echo 00FF00 > rgb
+
+What:		/sys/class/leds/blink1::<serial>/fade
+Date:		January 2013
+Contact:	Vivien Didelot <vivien.didelot@savoirfairelinux.com>
+Description:	This attribute allows to set a fade time in milliseconds for
+		the next color change. Read the attribute to know the current
+		fade time. The default value is set to 0 (no fade time). For
+		instance, set a fade time of 2 seconds with: echo 2000 > fade
+
+What:		/sys/class/leds/blink1::<serial>/play
+Date:		January 2013
+Contact:	Vivien Didelot <vivien.didelot@savoirfairelinux.com>
+Description:	This attribute is used to play/pause the light patterns. Write 1
+		to start playing, 0 to stop. Reading this attribute returns the
+		current playing status.

Documentation/ABI/testing/sysfs-kernel-mm-ksm

@@ -0,0 +1,52 @@
+What:		/sys/kernel/mm/ksm
+Date:		September 2009
+KernelVersion:	2.6.32
+Contact:	Linux memory management mailing list <linux-mm@kvack.org>
+Description:	Interface for Kernel Samepage Merging (KSM)
+
+What:		/sys/kernel/mm/ksm/full_scans
+What:		/sys/kernel/mm/ksm/pages_shared
+What:		/sys/kernel/mm/ksm/pages_sharing
+What:		/sys/kernel/mm/ksm/pages_to_scan
+What:		/sys/kernel/mm/ksm/pages_unshared
+What:		/sys/kernel/mm/ksm/pages_volatile
+What:		/sys/kernel/mm/ksm/run
+What:		/sys/kernel/mm/ksm/sleep_millisecs
+Date:		September 2009
+Contact:	Linux memory management mailing list <linux-mm@kvack.org>
+Description:	Kernel Samepage Merging daemon sysfs interface
+
+		full_scans: how many times all mergeable areas have been
+		scanned.
+
+		pages_shared: how many shared pages are being used.
+
+		pages_sharing: how many more sites are sharing them i.e. how
+		much saved.
+
+		pages_to_scan: how many present pages to scan before ksmd goes
+		to sleep.
+
+		pages_unshared: how many pages unique but repeatedly checked
+		for merging.
+
+		pages_volatile: how many pages changing too fast to be placed
+		in a tree.
+
+		run: write 0 to disable ksm, read 0 while ksm is disabled.
+			write 1 to run ksm, read 1 while ksm is running.
+			write 2 to disable ksm and unmerge all its pages.
+
+		sleep_millisecs: how many milliseconds ksm should sleep between
+		scans.
+
+		See Documentation/vm/ksm.txt for more information.
+
+What:		/sys/kernel/mm/ksm/merge_across_nodes
+Date:		January 2013
+KernelVersion:	3.9
+Contact:	Linux memory management mailing list <linux-mm@kvack.org>
+Description:	Control merging pages across different NUMA nodes.
+
+		When it is set to 0 only pages from the same node are merged,
+		otherwise pages from all nodes can be merged together (default).

Documentation/ABI/testing/sysfs-platform-msi-laptop

@@ -0,0 +1,83 @@
+What:		/sys/devices/platform/msi-laptop-pf/lcd_level
+Date:		Oct 2006
+KernelVersion:	2.6.19
+Contact:	"Lennart Poettering <mzxreary@0pointer.de>"
+Description:
+		Screen brightness: contains a single integer in the range 0..8.
+
+What:		/sys/devices/platform/msi-laptop-pf/auto_brightness
+Date:		Oct 2006
+KernelVersion:	2.6.19
+Contact:	"Lennart Poettering <mzxreary@0pointer.de>"
+Description:
+		Enable automatic brightness control: contains either 0 or 1. If
+		set to 1 the hardware adjusts the screen brightness
+		automatically when the power cord is plugged/unplugged.
+
+What:		/sys/devices/platform/msi-laptop-pf/wlan
+Date:		Oct 2006
+KernelVersion:	2.6.19
+Contact:	"Lennart Poettering <mzxreary@0pointer.de>"
+Description:
+		WLAN subsystem enabled: contains either 0 or 1.
+
+What:		/sys/devices/platform/msi-laptop-pf/bluetooth
+Date:		Oct 2006
+KernelVersion:	2.6.19
+Contact:	"Lennart Poettering <mzxreary@0pointer.de>"
+Description:
+		Bluetooth subsystem enabled: contains either 0 or 1. Please
+		note that this file is constantly 0 if no Bluetooth hardware is
+		available.
+
+What:		/sys/devices/platform/msi-laptop-pf/touchpad
+Date:		Nov 2012
+KernelVersion:	3.8
+Contact:	"Maxim Mikityanskiy <maxtram95@gmail.com>"
+Description:
+		Contains either 0 or 1 and indicates if touchpad is turned on.
+		Touchpad state can only be toggled by pressing Fn+F3.
+
+What:		/sys/devices/platform/msi-laptop-pf/turbo_mode
+Date:		Nov 2012
+KernelVersion:	3.8
+Contact:	"Maxim Mikityanskiy <maxtram95@gmail.com>"
+Description:
+		Contains either 0 or 1 and indicates if turbo mode is turned
+		on. In turbo mode power LED is orange and processor is
+		overclocked. Turbo mode is available only if charging. It is
+		only possible to toggle turbo mode state by pressing Fn+F10,
+		and there is a few seconds cooldown between subsequent toggles.
+		If user presses Fn+F10 too frequent, turbo mode state is not
+		changed.
+
+What:		/sys/devices/platform/msi-laptop-pf/eco_mode
+Date:		Nov 2012
+KernelVersion:	3.8
+Contact:	"Maxim Mikityanskiy <maxtram95@gmail.com>"
+Description:
+		Contains either 0 or 1 and indicates if ECO mode is turned on.
+		In ECO mode power LED is green and userspace should do some
+		powersaving actions. ECO mode is available only on battery
+		power. ECO mode can only be toggled by pressing Fn+F10.
+
+What:		/sys/devices/platform/msi-laptop-pf/turbo_cooldown
+Date:		Nov 2012
+KernelVersion:	3.8
+Contact:	"Maxim Mikityanskiy <maxtram95@gmail.com>"
+Description:
+		Contains value in range 0..3:
+			* 0 -> Turbo mode is off
+			* 1 -> Turbo mode is on, cannot be turned off yet
+			* 2 -> Turbo mode is off, cannot be turned on yet
+			* 3 -> Turbo mode is on
+
+What:		/sys/devices/platform/msi-laptop-pf/auto_fan
+Date:		Nov 2012
+KernelVersion:	3.8
+Contact:	"Maxim Mikityanskiy <maxtram95@gmail.com>"
+Description:
+		Contains either 0 or 1 and indicates if fan speed is controlled
+		automatically (1) or fan runs at maximal speed (0). Can be
+		toggled in software.
+

Documentation/ABI/testing/sysfs-platform-ts5500

@@ -0,0 +1,47 @@
+What:		/sys/devices/platform/ts5500/adc
+Date:		January 2013
+KernelVersion:	3.7
+Contact:	"Savoir-faire Linux Inc." <kernel@savoirfairelinux.com>
+Description:
+		Indicates the presence of an A/D Converter. If it is present,
+		it will display "1", otherwise "0".
+
+What:		/sys/devices/platform/ts5500/ereset
+Date:		January 2013
+KernelVersion:	3.7
+Contact:	"Savoir-faire Linux Inc." <kernel@savoirfairelinux.com>
+Description:
+		Indicates the presence of an external reset. If it is present,
+		it will display "1", otherwise "0".
+
+What:		/sys/devices/platform/ts5500/id
+Date:		January 2013
+KernelVersion:	3.7
+Contact:	"Savoir-faire Linux Inc." <kernel@savoirfairelinux.com>
+Description:
+		Product ID of the TS board. TS-5500 ID is 0x60.
+
+What:		/sys/devices/platform/ts5500/jumpers
+Date:		January 2013
+KernelVersion:	3.7
+Contact:	"Savoir-faire Linux Inc." <kernel@savoirfairelinux.com>
+Description:
+		Bitfield showing the jumpers' state. If a jumper is present,
+		the corresponding bit is set. For instance, 0x0e means jumpers
+		2, 3 and 4 are set.
+
+What:		/sys/devices/platform/ts5500/rs485
+Date:		January 2013
+KernelVersion:	3.7
+Contact:	"Savoir-faire Linux Inc." <kernel@savoirfairelinux.com>
+Description:
+		Indicates the presence of the RS485 option. If it is present,
+		it will display "1", otherwise "0".
+
+What:		/sys/devices/platform/ts5500/sram
+Date:		January 2013
+KernelVersion:	3.7
+Contact:	"Savoir-faire Linux Inc." <kernel@savoirfairelinux.com>
+Description:
+		Indicates the presence of the SRAM option. If it is present,
+		it will display "1", otherwise "0".

Documentation/CodingStyle

@@ -546,15 +546,7 @@ config AUDIT
 	  logging of avc messages output).  Does not do system-call
 	  auditing without CONFIG_AUDITSYSCALL.
 
-Features that might still be considered unstable should be defined as
-dependent on "EXPERIMENTAL":
-
-config SLUB
-	depends on EXPERIMENTAL && !ARCH_USES_SLAB_PAGE_STRUCT
-	bool "SLUB (Unqueued Allocator)"
-	...
-
-while seriously dangerous features (such as write support for certain
+Seriously dangerous features (such as write support for certain
 filesystems) should advertise this prominently in their prompt string:
 
 config ADFS_FS_RW

Documentation/DMA-API-HOWTO.txt

@@ -468,11 +468,47 @@ To map a single region, you do:
 	size_t size = buffer->len;
 
 	dma_handle = dma_map_single(dev, addr, size, direction);
+	if (dma_mapping_error(dma_handle)) {
+		/*
+		 * reduce current DMA mapping usage,
+		 * delay and try again later or
+		 * reset driver.
+		 */
+		goto map_error_handling;
+	}
 
 and to unmap it:
 
 	dma_unmap_single(dev, dma_handle, size, direction);
 
+You should call dma_mapping_error() as dma_map_single() could fail and return
+error. Not all dma implementations support dma_mapping_error() interface.
+However, it is a good practice to call dma_mapping_error() interface, which
+will invoke the generic mapping error check interface. Doing so will ensure
+that the mapping code will work correctly on all dma implementations without
+any dependency on the specifics of the underlying implementation. Using the
+returned address without checking for errors could result in failures ranging
+from panics to silent data corruption. A couple of examples of incorrect ways
+to check for errors that make assumptions about the underlying dma
+implementation are as follows and these are applicable to dma_map_page() as
+well.
+
+Incorrect example 1:
+	dma_addr_t dma_handle;
+
+	dma_handle = dma_map_single(dev, addr, size, direction);
+	if ((dma_handle & 0xffff != 0) || (dma_handle >= 0x1000000)) {
+		goto map_error;
+	}
+
+Incorrect example 2:
+	dma_addr_t dma_handle;
+
+	dma_handle = dma_map_single(dev, addr, size, direction);
+	if (dma_handle == DMA_ERROR_CODE) {
+		goto map_error;
+	}
+
 You should call dma_unmap_single when the DMA activity is finished, e.g.
 from the interrupt which told you that the DMA transfer is done.
 
@@ -489,6 +525,14 @@ Specifically:
 	size_t size = buffer->len;
 
 	dma_handle = dma_map_page(dev, page, offset, size, direction);
+	if (dma_mapping_error(dma_handle)) {
+		/*
+		 * reduce current DMA mapping usage,
+		 * delay and try again later or
+		 * reset driver.
+		 */
+		goto map_error_handling;
+	}
 
 	...
 
@@ -496,6 +540,12 @@ Specifically:
 
 Here, "offset" means byte offset within the given page.
 
+You should call dma_mapping_error() as dma_map_page() could fail and return
+error as outlined under the dma_map_single() discussion.
+
+You should call dma_unmap_page when the DMA activity is finished, e.g.
+from the interrupt which told you that the DMA transfer is done.
+
 With scatterlists, you map a region gathered from several regions by:
 
 	int i, count = dma_map_sg(dev, sglist, nents, direction);
@@ -578,6 +628,14 @@ to use the dma_sync_*() interfaces.
 		dma_addr_t mapping;
 
 		mapping = dma_map_single(cp->dev, buffer, len, DMA_FROM_DEVICE);
+		if (dma_mapping_error(dma_handle)) {
+			/*
+			 * reduce current DMA mapping usage,
+			 * delay and try again later or
+			 * reset driver.
+			 */
+			goto map_error_handling;
+		}
 
 		cp->rx_buf = buffer;
 		cp->rx_len = len;
@@ -658,6 +716,75 @@ failure can be determined by:
 		 * delay and try again later or
 		 * reset driver.
 		 */
+		goto map_error_handling;
+	}
+
+- unmap pages that are already mapped, when mapping error occurs in the middle
+  of a multiple page mapping attempt. These example are applicable to
+  dma_map_page() as well.
+
+Example 1:
+	dma_addr_t dma_handle1;
+	dma_addr_t dma_handle2;
+
+	dma_handle1 = dma_map_single(dev, addr, size, direction);
+	if (dma_mapping_error(dev, dma_handle1)) {
+		/*
+		 * reduce current DMA mapping usage,
+		 * delay and try again later or
+		 * reset driver.
+		 */
+		goto map_error_handling1;
+	}
+	dma_handle2 = dma_map_single(dev, addr, size, direction);
+	if (dma_mapping_error(dev, dma_handle2)) {
+		/*
+		 * reduce current DMA mapping usage,
+		 * delay and try again later or
+		 * reset driver.
+		 */
+		goto map_error_handling2;
+	}
+
+	...
+
+	map_error_handling2:
+		dma_unmap_single(dma_handle1);
+	map_error_handling1:
+
+Example 2: (if buffers are allocated in a loop, unmap all mapped buffers when
+	    mapping error is detected in the middle)
+
+	dma_addr_t dma_addr;
+	dma_addr_t array[DMA_BUFFERS];
+	int save_index = 0;
+
+	for (i = 0; i < DMA_BUFFERS; i++) {
+
+		...
+
+		dma_addr = dma_map_single(dev, addr, size, direction);
+		if (dma_mapping_error(dev, dma_addr)) {
+			/*
+			 * reduce current DMA mapping usage,
+			 * delay and try again later or
+			 * reset driver.
+			 */
+			goto map_error_handling;
+		}
+		array[i].dma_addr = dma_addr;
+		save_index++;
+	}
+
+	...
+
+	map_error_handling:
+
+	for (i = 0; i < save_index; i++) {
+
+		...
+
+		dma_unmap_single(array[i].dma_addr);
 	}
 
 Networking drivers must call dev_kfree_skb to free the socket buffer

Documentation/DMA-API.txt

@@ -678,3 +678,15 @@ out of dma_debug_entries. These entries are preallocated at boot. The number
 of preallocated entries is defined per architecture. If it is too low for you
 boot with 'dma_debug_entries=<your_desired_number>' to overwrite the
 architectural default.
+
+void debug_dmap_mapping_error(struct device *dev, dma_addr_t dma_addr);
+
+dma-debug interface debug_dma_mapping_error() to debug drivers that fail
+to check dma mapping errors on addresses returned by dma_map_single() and
+dma_map_page() interfaces. This interface clears a flag set by
+debug_dma_map_page() to indicate that dma_mapping_error() has been called by
+the driver. When driver does unmap, debug_dma_unmap() checks the flag and if
+this flag is still set, prints warning message that includes call trace that
+leads up to the unmap. This interface can be called from dma_mapping_error()
+routines to enable dma mapping error check debugging.
+

Documentation/DMA-attributes.txt

@@ -91,3 +91,12 @@ transferred to 'device' domain. This attribute can be also used for
 dma_unmap_{single,page,sg} functions family to force buffer to stay in
 device domain after releasing a mapping for it. Use this attribute with
 care!
+
+DMA_ATTR_FORCE_CONTIGUOUS
+-------------------------
+
+By default DMA-mapping subsystem is allowed to assemble the buffer
+allocated by dma_alloc_attrs() function from individual pages if it can
+be mapped as contiguous chunk into device dma address space. By
+specifing this attribute the allocated buffer is forced to be contiguous
+also in physical memory.

Documentation/DocBook/80211.tmpl

@@ -107,8 +107,8 @@
 !Finclude/net/cfg80211.h key_params
 !Finclude/net/cfg80211.h survey_info_flags
 !Finclude/net/cfg80211.h survey_info
-!Finclude/net/cfg80211.h beacon_parameters
-!Finclude/net/cfg80211.h plink_actions
+!Finclude/net/cfg80211.h cfg80211_beacon_data
+!Finclude/net/cfg80211.h cfg80211_ap_settings
 !Finclude/net/cfg80211.h station_parameters
 !Finclude/net/cfg80211.h station_info_flags
 !Finclude/net/cfg80211.h rate_info_flags

Documentation/DocBook/drm.tmpl

@@ -743,6 +743,10 @@ char *date;</synopsis>
           These two operations are mandatory for GEM drivers that support DRM
           PRIME.
         </para>
+        <sect4>
+          <title>DRM PRIME Helper Functions Reference</title>
+!Pdrivers/gpu/drm/drm_prime.c PRIME Helpers
+        </sect4>
       </sect3>
       <sect3 id="drm-gem-objects-mapping">
         <title>GEM Objects Mapping</title>
@@ -978,10 +982,25 @@ int max_width, max_height;</synopsis>
         If the parameters are deemed valid, drivers then create, initialize and
         return an instance of struct <structname>drm_framebuffer</structname>.
         If desired the instance can be embedded in a larger driver-specific
-        structure. The new instance is initialized with a call to
-        <function>drm_framebuffer_init</function> which takes a pointer to DRM
-        frame buffer operations (struct
-        <structname>drm_framebuffer_funcs</structname>). Frame buffer operations are
+	structure. Drivers must fill its <structfield>width</structfield>,
+	<structfield>height</structfield>, <structfield>pitches</structfield>,
+        <structfield>offsets</structfield>, <structfield>depth</structfield>,
+        <structfield>bits_per_pixel</structfield> and
+        <structfield>pixel_format</structfield> fields from the values passed
+        through the <parameter>drm_mode_fb_cmd2</parameter> argument. They
+        should call the <function>drm_helper_mode_fill_fb_struct</function>
+        helper function to do so.
+      </para>
+
+      <para>
+	The initailization of the new framebuffer instance is finalized with a
+	call to <function>drm_framebuffer_init</function> which takes a pointer
+	to DRM frame buffer operations (struct
+	<structname>drm_framebuffer_funcs</structname>). Note that this function
+	publishes the framebuffer and so from this point on it can be accessed
+	concurrently from other threads. Hence it must be the last step in the
+	driver's framebuffer initialization sequence. Frame buffer operations
+	are
         <itemizedlist>
           <listitem>
             <synopsis>int (*create_handle)(struct drm_framebuffer *fb,
@@ -1022,16 +1041,16 @@ int max_width, max_height;</synopsis>
         </itemizedlist>
       </para>
       <para>
-        After initializing the <structname>drm_framebuffer</structname>
-        instance drivers must fill its <structfield>width</structfield>,
-        <structfield>height</structfield>, <structfield>pitches</structfield>,
-        <structfield>offsets</structfield>, <structfield>depth</structfield>,
-        <structfield>bits_per_pixel</structfield> and
-        <structfield>pixel_format</structfield> fields from the values passed
-        through the <parameter>drm_mode_fb_cmd2</parameter> argument. They
-        should call the <function>drm_helper_mode_fill_fb_struct</function>
-        helper function to do so.
-      </para>
+	The lifetime of a drm framebuffer is controlled with a reference count,
+	drivers can grab additional references with
+	<function>drm_framebuffer_reference</function> </para> and drop them
+	again with <function>drm_framebuffer_unreference</function>. For
+	driver-private framebuffers for which the last reference is never
+	dropped (e.g. for the fbdev framebuffer when the struct
+	<structname>drm_framebuffer</structname> is embedded into the fbdev
+	helper struct) drivers can manually clean up a framebuffer at module
+	unload time with
+	<function>drm_framebuffer_unregister_private</function>.
     </sect2>
     <sect2>
       <title>Output Polling</title>
@@ -1043,6 +1062,22 @@ int max_width, max_height;</synopsis>
         operation.
       </para>
     </sect2>
+    <sect2>
+      <title>Locking</title>
+      <para>
+        Beside some lookup structures with their own locking (which is hidden
+	behind the interface functions) most of the modeset state is protected
+	by the <code>dev-&lt;mode_config.lock</code> mutex and additionally
+	per-crtc locks to allow cursor updates, pageflips and similar operations
+	to occur concurrently with background tasks like output detection.
+	Operations which cross domains like a full modeset always grab all
+	locks. Drivers there need to protect resources shared between crtcs with
+	additional locking. They also need to be careful to always grab the
+	relevant crtc locks if a modset functions touches crtc state, e.g. for
+	load detection (which does only grab the <code>mode_config.lock</code>
+	to allow concurrent screen updates on live crtcs).
+      </para>
+    </sect2>
   </sect1>
 
   <!-- Internals: kms initialization and cleanup -->
@@ -1125,6 +1160,12 @@ int max_width, max_height;</synopsis>
             without waiting for rendering or page flip to complete and must block
             any new rendering to the frame buffer until the page flip completes.
           </para>
+          <para>
+            If a page flip can be successfully scheduled the driver must set the
+            <code>drm_crtc-&lt;fb</code> field to the new framebuffer pointed to
+            by <code>fb</code>. This is important so that the reference counting
+            on framebuffers stays balanced.
+          </para>
           <para>
             If a page flip is already pending, the
             <methodname>page_flip</methodname> operation must return
@@ -1141,23 +1182,13 @@ int max_width, max_height;</synopsis>
             the <methodname>page_flip</methodname> operation will be called with a
             non-NULL <parameter>event</parameter> argument pointing to a
             <structname>drm_pending_vblank_event</structname> instance. Upon page
-            flip completion the driver must fill the
-            <parameter>event</parameter>::<structfield>event</structfield>
-            <structfield>sequence</structfield>, <structfield>tv_sec</structfield>
-            and <structfield>tv_usec</structfield> fields with the associated
-            vertical blanking count and timestamp, add the event to the
-            <parameter>drm_file</parameter> list of events to be signaled, and wake
-            up any waiting process. This can be performed with
+            flip completion the driver must call <methodname>drm_send_vblank_event</methodname>
+            to fill in the event and send to wake up any waiting processes.
+            This can be performed with
             <programlisting><![CDATA[
-            struct timeval now;
-
-            event->event.sequence = drm_vblank_count_and_time(..., &now);
-            event->event.tv_sec = now.tv_sec;
-            event->event.tv_usec = now.tv_usec;
-
             spin_lock_irqsave(&dev->event_lock, flags);
-            list_add_tail(&event->base.link, &event->base.file_priv->event_list);
-            wake_up_interruptible(&event->base.file_priv->event_wait);
+            ...
+            drm_send_vblank_event(dev, pipe, event);
             spin_unlock_irqrestore(&dev->event_lock, flags);
             ]]></programlisting>
           </para>
@@ -1619,12 +1650,16 @@ void intel_crt_init(struct drm_device *dev)
         make its properties available to applications.
       </para>
     </sect2>
+    <sect2>
+      <title>KMS API Functions</title>
+!Edrivers/gpu/drm/drm_crtc.c
+    </sect2>
   </sect1>
 
-  <!-- Internals: mid-layer helper functions -->
+  <!-- Internals: kms helper functions -->
 
   <sect1>
-    <title>Mid-layer Helper Functions</title>
+    <title>Mode Setting Helper Functions</title>
     <para>
       The CRTC, encoder and connector functions provided by the drivers
       implement the DRM API. They're called by the DRM core and ioctl handlers
@@ -2106,6 +2141,26 @@ void intel_crt_init(struct drm_device *dev)
         </listitem>
       </itemizedlist>
     </sect2>
+    <sect2>
+      <title>Modeset Helper Functions Reference</title>
+!Edrivers/gpu/drm/drm_crtc_helper.c
+    </sect2>
+    <sect2>
+      <title>fbdev Helper Functions Reference</title>
+!Pdrivers/gpu/drm/drm_fb_helper.c fbdev helpers
+!Edrivers/gpu/drm/drm_fb_helper.c
+!Iinclude/drm/drm_fb_helper.h
+    </sect2>
+    <sect2>
+      <title>Display Port Helper Functions Reference</title>
+!Pdrivers/gpu/drm/drm_dp_helper.c dp helpers
+!Iinclude/drm/drm_dp_helper.h
+!Edrivers/gpu/drm/drm_dp_helper.c
+    </sect2>
+    <sect2>
+      <title>EDID Helper Functions Reference</title>
+!Edrivers/gpu/drm/drm_edid.c
+    </sect2>
   </sect1>
 
   <!-- Internals: vertical blanking -->

Documentation/DocBook/kernel-api.tmpl

@@ -58,6 +58,9 @@
 
      <sect1><title>String Conversions</title>
 !Elib/vsprintf.c
+!Finclude/linux/kernel.h kstrtol
+!Finclude/linux/kernel.h kstrtoul
+!Elib/kstrtox.c
      </sect1>
      <sect1><title>String Manipulation</title>
 <!-- All functions are exported at now

Documentation/DocBook/kernel-hacking.tmpl

@@ -945,7 +945,7 @@ printk(KERN_INFO "my ip: %pI4\n", &ipaddress);
 
   <sect1 id="sym-exportsymbols">
    <title><function>EXPORT_SYMBOL()</function>
-    <filename class="headerfile">include/linux/module.h</filename></title>
+    <filename class="headerfile">include/linux/export.h</filename></title>
 
    <para>
     This is the classic method of exporting a symbol: dynamically
@@ -955,7 +955,7 @@ printk(KERN_INFO "my ip: %pI4\n", &amp;ipaddress);
 
   <sect1 id="sym-exportsymbols-gpl">
    <title><function>EXPORT_SYMBOL_GPL()</function>
-    <filename class="headerfile">include/linux/module.h</filename></title>
+    <filename class="headerfile">include/linux/export.h</filename></title>
 
    <para>
     Similar to <function>EXPORT_SYMBOL()</function> except that the
@@ -1184,13 +1184,6 @@ static struct block_device_operations opt_fops = {
      <filename>Documentation/kbuild/kconfig-language.txt</filename>.
     </para>
 
-    <para>
-     You may well want to make your CONFIG option only visible if
-     <symbol>CONFIG_EXPERIMENTAL</symbol> is enabled: this serves as a
-     warning to users.  There many other fancy things you can do: see
-     the various <filename>Kconfig</filename> files for ideas.
-    </para>
-
     <para>
      In your description of the option, make sure you address both the
      expert user and the user who knows nothing about your feature.  Mention

Documentation/DocBook/kgdb.tmpl

@@ -94,10 +94,8 @@
   <sect1 id="CompileKGDB">
     <title>Kernel config options for kgdb</title>
     <para>
-    To enable <symbol>CONFIG_KGDB</symbol> you should first turn on
-    "Prompt for development and/or incomplete code/drivers"
-    (CONFIG_EXPERIMENTAL) in  "General setup", then under the
-    "Kernel debugging" select "KGDB: kernel debugger".
+    To enable <symbol>CONFIG_KGDB</symbol> you should look under
+    "Kernel debugging" and select "KGDB: kernel debugger".
     </para>
     <para>
     While it is not a hard requirement that you have symbols in your

Documentation/DocBook/media/dvb/dvbapi.xml

@@ -84,7 +84,7 @@ Added ISDB-T test originally written by Patrick Boettcher
 
 
 <title>LINUX DVB API</title>
-<subtitle>Version 5.8</subtitle>
+<subtitle>Version 5.10</subtitle>
 <!-- ADD THE CHAPTERS HERE -->
   <chapter id="dvb_introdution">
     &sub-intro;

Documentation/DocBook/media/dvb/dvbproperty.xml

@@ -7,14 +7,41 @@ the capability ioctls weren't implemented yet via the new way.</para>
 <para>The typical usage for the <constant>FE_GET_PROPERTY/FE_SET_PROPERTY</constant>
 API is to replace the ioctl's were the <link linkend="dvb-frontend-parameters">
 struct <constant>dvb_frontend_parameters</constant></link> were used.</para>
+<section id="dtv-stats">
+<title>DTV stats type</title>
+<programlisting>
+struct dtv_stats {
+	__u8 scale;	/* enum fecap_scale_params type */
+	union {
+		__u64 uvalue;	/* for counters and relative scales */
+		__s64 svalue;	/* for 1/1000 dB measures */
+	};
+} __packed;
+</programlisting>
+</section>
+<section id="dtv-fe-stats">
+<title>DTV stats type</title>
+<programlisting>
+#define MAX_DTV_STATS   4
+
+struct dtv_fe_stats {
+	__u8 len;
+	struct dtv_stats stat[MAX_DTV_STATS];
+} __packed;
+</programlisting>
+</section>
+
 <section id="dtv-property">
 <title>DTV property type</title>
 <programlisting>
 /* Reserved fields should be set to 0 */
+
 struct dtv_property {
 	__u32 cmd;
+	__u32 reserved[3];
 	union {
 		__u32 data;
+		struct dtv_fe_stats st;
 		struct {
 			__u8 data[32];
 			__u32 len;
@@ -440,7 +467,7 @@ typedef enum fe_delivery_system {
 		<title><constant>DTV-ISDBT-LAYER*</constant> parameters</title>
 		<para>ISDB-T channels can be coded hierarchically. As opposed to DVB-T in
 			ISDB-T hierarchical layers can be decoded simultaneously. For that
-			reason a ISDB-T demodulator has 3 viterbi and 3 reed-solomon-decoders.</para>
+			reason a ISDB-T demodulator has 3 Viterbi and 3 Reed-Solomon decoders.</para>
 		<para>ISDB-T has 3 hierarchical layers which each can use a part of the
 			available segments. The total number of segments over all layers has
 			to 13 in ISDB-T.</para>
@@ -850,6 +877,147 @@ enum fe_interleaving {
 	<para>use the special macro LNA_AUTO to set LNA auto</para>
 	</section>
 </section>
+
+	<section id="frontend-stat-properties">
+	<title>Frontend statistics indicators</title>
+	<para>The values are returned via <constant>dtv_property.stat</constant>.
+	      If the property is supported, <constant>dtv_property.stat.len</constant> is bigger than zero.</para>
+	<para>For most delivery systems, <constant>dtv_property.stat.len</constant>
+	      will be 1 if the stats is supported, and the properties will
+	      return a single value for each parameter.</para>
+	<para>It should be noticed, however, that new OFDM delivery systems
+	      like ISDB can use different modulation types for each group of
+	      carriers. On such standards, up to 3 groups of statistics can be
+	      provided, and <constant>dtv_property.stat.len</constant> is updated
+	      to reflect the "global" metrics, plus one metric per each carrier
+	      group (called "layer" on ISDB).</para>
+	<para>So, in order to be consistent with other delivery systems, the first
+	      value at <link linkend="dtv-stats"><constant>dtv_property.stat.dtv_stats</constant></link>
+	      array refers to the global metric. The other elements of the array
+	      represent each layer, starting from layer A(index 1),
+	      layer B (index 2) and so on.</para>
+	<para>The number of filled elements are stored at <constant>dtv_property.stat.len</constant>.</para>
+	<para>Each element of the <constant>dtv_property.stat.dtv_stats</constant> array consists on two elements:</para>
+	<itemizedlist mark='opencircle'>
+		<listitem><para><constant>svalue</constant> or <constant>uvalue</constant>, where
+			<constant>svalue</constant> is for signed values of the measure (dB measures)
+			and <constant>uvalue</constant> is for unsigned values (counters, relative scale)</para></listitem>
+		<listitem><para><constant>scale</constant> - Scale for the value. It can be:</para>
+			<section id = "fecap-scale-params">
+			<itemizedlist mark='bullet'>
+				<listitem><para><constant>FE_SCALE_NOT_AVAILABLE</constant> - The parameter is supported by the frontend, but it was not possible to collect it (could be a transitory or permanent condition)</para></listitem>
+				<listitem><para><constant>FE_SCALE_DECIBEL</constant> - parameter is a signed value, measured in 1/1000 dB</para></listitem>
+				<listitem><para><constant>FE_SCALE_RELATIVE</constant> - parameter is a unsigned value, where 0 means 0% and 65535 means 100%.</para></listitem>
+				<listitem><para><constant>FE_SCALE_COUNTER</constant> - parameter is a unsigned value that counts the occurrence of an event, like bit error, block error, or lapsed time.</para></listitem>
+			</itemizedlist>
+			</section>
+		</listitem>
+	</itemizedlist>
+	<section id="DTV-STAT-SIGNAL-STRENGTH">
+		<title><constant>DTV_STAT_SIGNAL_STRENGTH</constant></title>
+		<para>Indicates the signal strength level at the analog part of the tuner or of the demod.</para>
+		<para>Possible scales for this metric are:</para>
+		<itemizedlist mark='bullet'>
+			<listitem><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</listitem>
+			<listitem><constant>FE_SCALE_DECIBEL</constant> - signal strength is in 0.0001 dBm units, power measured in miliwatts. This value is generally negative.</listitem>
+			<listitem><constant>FE_SCALE_RELATIVE</constant> - The frontend provides a 0% to 100% measurement for power (actually, 0 to 65535).</listitem>
+		</itemizedlist>
+	</section>
+	<section id="DTV-STAT-CNR">
+		<title><constant>DTV_STAT_CNR</constant></title>
+		<para>Indicates the Signal to Noise ratio for the main carrier.</para>
+		<para>Possible scales for this metric are:</para>
+		<itemizedlist mark='bullet'>
+			<listitem><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</listitem>
+			<listitem><constant>FE_SCALE_DECIBEL</constant> - Signal/Noise ratio is in 0.0001 dB units.</listitem>
+			<listitem><constant>FE_SCALE_RELATIVE</constant> - The frontend provides a 0% to 100% measurement for Signal/Noise (actually, 0 to 65535).</listitem>
+		</itemizedlist>
+	</section>
+	<section id="DTV-STAT-PRE-ERROR-BIT-COUNT">
+		<title><constant>DTV_STAT_PRE_ERROR_BIT_COUNT</constant></title>
+		<para>Measures the number of bit errors before the forward error correction (FEC) on the inner coding block (before Viterbi, LDPC or other inner code).</para>
+		<para>This measure is taken during the same interval as <constant>DTV_STAT_PRE_TOTAL_BIT_COUNT</constant>.</para>
+		<para>In order to get the BER (Bit Error Rate) measurement, it should be divided by
+		<link linkend="DTV-STAT-PRE-TOTAL-BIT-COUNT"><constant>DTV_STAT_PRE_TOTAL_BIT_COUNT</constant></link>.</para>
+		<para>This measurement is monotonically increased, as the frontend gets more bit count measurements.
+		      The frontend may reset it when a channel/transponder is tuned.</para>
+		<para>Possible scales for this metric are:</para>
+		<itemizedlist mark='bullet'>
+			<listitem><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</listitem>
+			<listitem><constant>FE_SCALE_COUNTER</constant> - Number of error bits counted before the inner coding.</listitem>
+		</itemizedlist>
+	</section>
+	<section id="DTV-STAT-PRE-TOTAL-BIT-COUNT">
+		<title><constant>DTV_STAT_PRE_TOTAL_BIT_COUNT</constant></title>
+		<para>Measures the amount of bits received before the inner code block, during the same period as
+		<link linkend="DTV-STAT-PRE-ERROR-BIT-COUNT"><constant>DTV_STAT_PRE_ERROR_BIT_COUNT</constant></link> measurement was taken.</para>
+		<para>It should be noticed that this measurement can be smaller than the total amount of bits on the transport stream,
+		      as the frontend may need to manually restart the measurement, loosing some data between each measurement interval.</para>
+		<para>This measurement is monotonically increased, as the frontend gets more bit count measurements.
+		      The frontend may reset it when a channel/transponder is tuned.</para>
+		<para>Possible scales for this metric are:</para>
+		<itemizedlist mark='bullet'>
+			<listitem><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</listitem>
+			<listitem><constant>FE_SCALE_COUNTER</constant> - Number of bits counted while measuring
+				 <link linkend="DTV-STAT-PRE-ERROR-BIT-COUNT"><constant>DTV_STAT_PRE_ERROR_BIT_COUNT</constant></link>.</listitem>
+		</itemizedlist>
+	</section>
+	<section id="DTV-STAT-POST-ERROR-BIT-COUNT">
+		<title><constant>DTV_STAT_POST_ERROR_BIT_COUNT</constant></title>
+		<para>Measures the number of bit errors after the forward error correction (FEC) done by inner code block (after Viterbi, LDPC or other inner code).</para>
+		<para>This measure is taken during the same interval as <constant>DTV_STAT_POST_TOTAL_BIT_COUNT</constant>.</para>
+		<para>In order to get the BER (Bit Error Rate) measurement, it should be divided by
+		<link linkend="DTV-STAT-POST-TOTAL-BIT-COUNT"><constant>DTV_STAT_POST_TOTAL_BIT_COUNT</constant></link>.</para>
+		<para>This measurement is monotonically increased, as the frontend gets more bit count measurements.
+		      The frontend may reset it when a channel/transponder is tuned.</para>
+		<para>Possible scales for this metric are:</para>
+		<itemizedlist mark='bullet'>
+			<listitem><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</listitem>
+			<listitem><constant>FE_SCALE_COUNTER</constant> - Number of error bits counted after the inner coding.</listitem>
+		</itemizedlist>
+	</section>
+	<section id="DTV-STAT-POST-TOTAL-BIT-COUNT">
+		<title><constant>DTV_STAT_POST_TOTAL_BIT_COUNT</constant></title>
+		<para>Measures the amount of bits received after the inner coding, during the same period as
+		<link linkend="DTV-STAT-POST-ERROR-BIT-COUNT"><constant>DTV_STAT_POST_ERROR_BIT_COUNT</constant></link> measurement was taken.</para>
+		<para>It should be noticed that this measurement can be smaller than the total amount of bits on the transport stream,
+		      as the frontend may need to manually restart the measurement, loosing some data between each measurement interval.</para>
+		<para>This measurement is monotonically increased, as the frontend gets more bit count measurements.
+		      The frontend may reset it when a channel/transponder is tuned.</para>
+		<para>Possible scales for this metric are:</para>
+		<itemizedlist mark='bullet'>
+			<listitem><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</listitem>
+			<listitem><constant>FE_SCALE_COUNTER</constant> - Number of bits counted while measuring
+				 <link linkend="DTV-STAT-POST-ERROR-BIT-COUNT"><constant>DTV_STAT_POST_ERROR_BIT_COUNT</constant></link>.</listitem>
+		</itemizedlist>
+	</section>
+	<section id="DTV-STAT-ERROR-BLOCK-COUNT">
+		<title><constant>DTV_STAT_ERROR_BLOCK_COUNT</constant></title>
+		<para>Measures the number of block errors after the outer forward error correction coding (after Reed-Solomon or other outer code).</para>
+		<para>This measurement is monotonically increased, as the frontend gets more bit count measurements.
+		      The frontend may reset it when a channel/transponder is tuned.</para>
+		<para>Possible scales for this metric are:</para>
+		<itemizedlist mark='bullet'>
+			<listitem><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</listitem>
+			<listitem><constant>FE_SCALE_COUNTER</constant> - Number of error blocks counted after the outer coding.</listitem>
+		</itemizedlist>
+	</section>
+	<section id="DTV-STAT-TOTAL-BLOCK-COUNT">
+		<title><constant>DTV-STAT_TOTAL_BLOCK_COUNT</constant></title>
+		<para>Measures the total number of blocks received during the same period as
+		<link linkend="DTV-STAT-ERROR-BLOCK-COUNT"><constant>DTV_STAT_ERROR_BLOCK_COUNT</constant></link> measurement was taken.</para>
+		<para>It can be used to calculate the PER indicator, by dividing
+		<link linkend="DTV-STAT-ERROR-BLOCK-COUNT"><constant>DTV_STAT_ERROR_BLOCK_COUNT</constant></link>
+		by <link linkend="DTV-STAT-TOTAL-BLOCK-COUNT"><constant>DTV-STAT-TOTAL-BLOCK-COUNT</constant></link>.</para>
+		<para>Possible scales for this metric are:</para>
+		<itemizedlist mark='bullet'>
+			<listitem><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</listitem>
+			<listitem><constant>FE_SCALE_COUNTER</constant> - Number of blocks counted while measuring
+			<link linkend="DTV-STAT-ERROR-BLOCK-COUNT"><constant>DTV_STAT_ERROR_BLOCK_COUNT</constant></link>.</listitem>
+		</itemizedlist>
+	</section>
+	</section>
+
 	<section id="frontend-property-terrestrial-systems">
 	<title>Properties used on terrestrial delivery systems</title>
 		<section id="dvbt-params">
@@ -871,6 +1039,7 @@ enum fe_interleaving {
 				<listitem><para><link linkend="DTV-HIERARCHY"><constant>DTV_HIERARCHY</constant></link></para></listitem>
 				<listitem><para><link linkend="DTV-LNA"><constant>DTV_LNA</constant></link></para></listitem>
 			</itemizedlist>
+			<para>In addition, the <link linkend="frontend-stat-properties">DTV QoS statistics</link> are also valid.</para>
 		</section>
 		<section id="dvbt2-params">
 			<title>DVB-T2 delivery system</title>
@@ -895,6 +1064,7 @@ enum fe_interleaving {
 			<listitem><para><link linkend="DTV-STREAM-ID"><constant>DTV_STREAM_ID</constant></link></para></listitem>
 			<listitem><para><link linkend="DTV-LNA"><constant>DTV_LNA</constant></link></para></listitem>
 		</itemizedlist>
+		<para>In addition, the <link linkend="frontend-stat-properties">DTV QoS statistics</link> are also valid.</para>
 		</section>
 		<section id="isdbt">
 		<title>ISDB-T delivery system</title>
@@ -948,6 +1118,7 @@ enum fe_interleaving {
 			<listitem><para><link linkend="DTV-ISDBT-LAYER-SEGMENT-COUNT"><constant>DTV_ISDBT_LAYERC_SEGMENT_COUNT</constant></link></para></listitem>
 			<listitem><para><link linkend="DTV-ISDBT-LAYER-TIME-INTERLEAVING"><constant>DTV_ISDBT_LAYERC_TIME_INTERLEAVING</constant></link></para></listitem>
 		</itemizedlist>
+		<para>In addition, the <link linkend="frontend-stat-properties">DTV QoS statistics</link> are also valid.</para>
 		</section>
 		<section id="atsc-params">
 			<title>ATSC delivery system</title>
@@ -961,6 +1132,7 @@ enum fe_interleaving {
 				<listitem><para><link linkend="DTV-MODULATION"><constant>DTV_MODULATION</constant></link></para></listitem>
 				<listitem><para><link linkend="DTV-BANDWIDTH-HZ"><constant>DTV_BANDWIDTH_HZ</constant></link></para></listitem>
 			</itemizedlist>
+			<para>In addition, the <link linkend="frontend-stat-properties">DTV QoS statistics</link> are also valid.</para>
 		</section>
 		<section id="atscmh-params">
 			<title>ATSC-MH delivery system</title>
@@ -988,6 +1160,7 @@ enum fe_interleaving {
 				<listitem><para><link linkend="DTV-ATSCMH-SCCC-CODE-MODE-C"><constant>DTV_ATSCMH_SCCC_CODE_MODE_C</constant></link></para></listitem>
 				<listitem><para><link linkend="DTV-ATSCMH-SCCC-CODE-MODE-D"><constant>DTV_ATSCMH_SCCC_CODE_MODE_D</constant></link></para></listitem>
 			</itemizedlist>
+			<para>In addition, the <link linkend="frontend-stat-properties">DTV QoS statistics</link> are also valid.</para>
 		</section>
 		<section id="dtmb-params">
 			<title>DTMB delivery system</title>
@@ -1007,6 +1180,7 @@ enum fe_interleaving {
 				<listitem><para><link linkend="DTV-INTERLEAVING"><constant>DTV_INTERLEAVING</constant></link></para></listitem>
 				<listitem><para><link linkend="DTV-LNA"><constant>DTV_LNA</constant></link></para></listitem>
 			</itemizedlist>
+			<para>In addition, the <link linkend="frontend-stat-properties">DTV QoS statistics</link> are also valid.</para>
 		</section>
 	</section>
 	<section id="frontend-property-cable-systems">
@@ -1028,6 +1202,7 @@ enum fe_interleaving {
 			<listitem><para><link linkend="DTV-INNER-FEC"><constant>DTV_INNER_FEC</constant></link></para></listitem>
 			<listitem><para><link linkend="DTV-LNA"><constant>DTV_LNA</constant></link></para></listitem>
 		</itemizedlist>
+		<para>In addition, the <link linkend="frontend-stat-properties">DTV QoS statistics</link> are also valid.</para>
 	</section>
 	<section id="dvbc-annex-b-params">
 		<title>DVB-C Annex B delivery system</title>
@@ -1043,6 +1218,7 @@ enum fe_interleaving {
 			<listitem><para><link linkend="DTV-INVERSION"><constant>DTV_INVERSION</constant></link></para></listitem>
 			<listitem><para><link linkend="DTV-LNA"><constant>DTV_LNA</constant></link></para></listitem>
 		</itemizedlist>
+		<para>In addition, the <link linkend="frontend-stat-properties">DTV QoS statistics</link> are also valid.</para>
 	</section>
 	</section>
 	<section id="frontend-property-satellital-systems">
@@ -1062,6 +1238,7 @@ enum fe_interleaving {
 			<listitem><para><link linkend="DTV-VOLTAGE"><constant>DTV_VOLTAGE</constant></link></para></listitem>
 			<listitem><para><link linkend="DTV-TONE"><constant>DTV_TONE</constant></link></para></listitem>
 		</itemizedlist>
+		<para>In addition, the <link linkend="frontend-stat-properties">DTV QoS statistics</link> are also valid.</para>
 		<para>Future implementations might add those two missing parameters:</para>
 		<itemizedlist mark='opencircle'>
 			<listitem><para><link linkend="DTV-DISEQC-MASTER"><constant>DTV_DISEQC_MASTER</constant></link></para></listitem>
@@ -1077,6 +1254,7 @@ enum fe_interleaving {
 			<listitem><para><link linkend="DTV-ROLLOFF"><constant>DTV_ROLLOFF</constant></link></para></listitem>
 			<listitem><para><link linkend="DTV-STREAM-ID"><constant>DTV_STREAM_ID</constant></link></para></listitem>
 		</itemizedlist>
+		<para>In addition, the <link linkend="frontend-stat-properties">DTV QoS statistics</link> are also valid.</para>
 	</section>
 	<section id="turbo-params">
 		<title>Turbo code delivery system</title>

Documentation/DocBook/media/dvb/frontend.xml

@@ -230,7 +230,7 @@ typedef enum fe_status {
 <entry align="char">The frontend has found a DVB signal</entry>
 </row><row>
 <entry align="char">FE_HAS_VITERBI</entry>
-<entry align="char">The frontend FEC code is stable</entry>
+<entry align="char">The frontend FEC inner coding (Viterbi, LDPC or other inner code) is stable</entry>
 </row><row>
 <entry align="char">FE_HAS_SYNC</entry>
 <entry align="char">Syncronization bytes was found</entry>

Documentation/DocBook/media/v4l/common.xml

@@ -609,7 +609,7 @@ to zero and the <constant>VIDIOC_G_STD</constant>,
 	<para>Applications can make use of the <xref linkend="input-capabilities" /> and
 <xref linkend="output-capabilities"/> flags to determine whether the video standard ioctls
 are available for the device.</para>
-&ENOTTY;.
+
 	<para>See <xref linkend="buffer" /> for a rationale. Probably
 even USB cameras follow some well known video standard. It might have
 been better to explicitly indicate elsewhere if a device cannot live

Documentation/DocBook/media/v4l/compat.xml

@@ -2477,6 +2477,22 @@ that used it. It was originally scheduled for removal in 2.6.35.
       </orderedlist>
     </section>
 
+    <section>
+      <title>V4L2 in Linux 3.9</title>
+      <orderedlist>
+        <listitem>
+	  <para>Added timestamp types to
+	  <structfield>flags</structfield> field in
+	  <structname>v4l2_buffer</structname>. See <xref
+	  linkend="buffer-flags" />.</para>
+        </listitem>
+        <listitem>
+	  <para>Added <constant>V4L2_EVENT_CTRL_CH_RANGE</constant> control event
+	  changes flag. See <xref linkend="changes-flags"/>.</para>
+        </listitem>
+      </orderedlist>
+    </section>
+
     <section id="other">
       <title>Relation of V4L2 to other Linux multimedia APIs</title>
 
@@ -2586,6 +2602,13 @@ ioctls.</para>
 	  <para>Vendor and device specific media bus pixel formats.
 	    <xref linkend="v4l2-mbus-vendor-spec-fmts" />.</para>
         </listitem>
+        <listitem>
+	  <para>Importing DMABUF file descriptors as a new IO method described
+	  in <xref linkend="dmabuf" />.</para>
+        </listitem>
+        <listitem>
+	  <para>Exporting DMABUF files using &VIDIOC-EXPBUF; ioctl.</para>
+        </listitem>
       </itemizedlist>
     </section>
 

Documentation/DocBook/media/v4l/controls.xml

@@ -203,29 +203,6 @@ and should not be used in new drivers and applications.</entry>
 	    <entry>boolean</entry>
 	    <entry>Mirror the picture vertically.</entry>
 	  </row>
-	<row>
-	  <entry><constant>V4L2_CID_HCENTER_DEPRECATED</constant> (formerly <constant>V4L2_CID_HCENTER</constant>)</entry>
-	    <entry>integer</entry>
-	    <entry>Horizontal image centering. This control is
-deprecated. New drivers and applications should use the <link
-linkend="camera-controls">Camera class controls</link>
-<constant>V4L2_CID_PAN_ABSOLUTE</constant>,
-<constant>V4L2_CID_PAN_RELATIVE</constant> and
-<constant>V4L2_CID_PAN_RESET</constant> instead.</entry>
-	  </row>
-	  <row>
-	    <entry><constant>V4L2_CID_VCENTER_DEPRECATED</constant>
-	    (formerly <constant>V4L2_CID_VCENTER</constant>)</entry>
-	    <entry>integer</entry>
-	    <entry>Vertical image centering. Centering is intended to
-<emphasis>physically</emphasis> adjust cameras. For image cropping see
-<xref linkend="crop" />, for clipping <xref linkend="overlay" />. This
-control is deprecated. New drivers and applications should use the
-<link linkend="camera-controls">Camera class controls</link>
-<constant>V4L2_CID_TILT_ABSOLUTE</constant>,
-<constant>V4L2_CID_TILT_RELATIVE</constant> and
-<constant>V4L2_CID_TILT_RESET</constant> instead.</entry>
-	  </row>
 	  <row id="v4l2-power-line-frequency">
 	    <entry><constant>V4L2_CID_POWER_LINE_FREQUENCY</constant></entry>
 	    <entry>enum</entry>

Documentation/DocBook/media/v4l/driver.xml

@@ -116,7 +116,7 @@ my_suspend              (struct pci_dev *               pci_dev,
 	return 0; /* a negative value on error, 0 on success. */
 }
 
-static void __devexit
+static void
 my_remove               (struct pci_dev *               pci_dev)
 {
 	my_device *my = pci_get_drvdata (pci_dev);
@@ -124,7 +124,7 @@ my_remove               (struct pci_dev *               pci_dev)
 	/* Describe me. */
 }
 
-static int __devinit
+static int
 my_probe                (struct pci_dev *               pci_dev,
 			 const struct pci_device_id *   pci_id)
 {
@@ -157,7 +157,7 @@ my_pci_driver = {
 	.id_table = my_pci_device_ids,
 
 	.probe    = my_probe,
-	.remove   = __devexit_p (my_remove),
+	.remove   = my_remove,
 
 	/* Power management functions. */
 	.suspend  = my_suspend,

Documentation/DocBook/media/v4l/io.xml

@@ -331,7 +331,7 @@ application until one or more buffers can be dequeued. By default
 outgoing queue. When the <constant>O_NONBLOCK</constant> flag was
 given to the &func-open; function, <constant>VIDIOC_DQBUF</constant>
 returns immediately with an &EAGAIN; when no buffer is available. The
-&func-select; or &func-poll; function are always available.</para>
+&func-select; or &func-poll; functions are always available.</para>
 
     <para>To start and stop capturing or output applications call the
 &VIDIOC-STREAMON; and &VIDIOC-STREAMOFF; ioctl. Note
@@ -472,6 +472,165 @@ rest should be evident.</para>
       </footnote></para>
   </section>
 
+  <section id="dmabuf">
+    <title>Streaming I/O (DMA buffer importing)</title>
+
+    <note>
+      <title>Experimental</title>
+      <para>This is an <link linkend="experimental">experimental</link>
+      interface and may change in the future.</para>
+    </note>
+
+<para>The DMABUF framework provides a generic method for sharing buffers
+between multiple devices. Device drivers that support DMABUF can export a DMA
+buffer to userspace as a file descriptor (known as the exporter role), import a
+DMA buffer from userspace using a file descriptor previously exported for a
+different or the same device (known as the importer role), or both. This
+section describes the DMABUF importer role API in V4L2.</para>
+
+    <para>Refer to <link linkend="vidioc-expbuf">DMABUF exporting</link> for
+details about exporting V4L2 buffers as DMABUF file descriptors.</para>
+
+<para>Input and output devices support the streaming I/O method when the
+<constant>V4L2_CAP_STREAMING</constant> flag in the
+<structfield>capabilities</structfield> field of &v4l2-capability; returned by
+the &VIDIOC-QUERYCAP; ioctl is set. Whether importing DMA buffers through
+DMABUF file descriptors is supported is determined by calling the
+&VIDIOC-REQBUFS; ioctl with the memory type set to
+<constant>V4L2_MEMORY_DMABUF</constant>.</para>
+
+    <para>This I/O method is dedicated to sharing DMA buffers between different
+devices, which may be V4L devices or other video-related devices (e.g. DRM).
+Buffers (planes) are allocated by a driver on behalf of an application. Next,
+these buffers are exported to the application as file descriptors using an API
+which is specific for an allocator driver.  Only such file descriptor are
+exchanged. The descriptors and meta-information are passed in &v4l2-buffer; (or
+in &v4l2-plane; in the multi-planar API case).  The driver must be switched
+into DMABUF I/O mode by calling the &VIDIOC-REQBUFS; with the desired buffer
+type.</para>
+
+    <example>
+      <title>Initiating streaming I/O with DMABUF file descriptors</title>
+
+      <programlisting>
+&v4l2-requestbuffers; reqbuf;
+
+memset(&amp;reqbuf, 0, sizeof (reqbuf));
+reqbuf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+reqbuf.memory = V4L2_MEMORY_DMABUF;
+reqbuf.count = 1;
+
+if (ioctl(fd, &VIDIOC-REQBUFS;, &amp;reqbuf) == -1) {
+	if (errno == EINVAL)
+		printf("Video capturing or DMABUF streaming is not supported\n");
+	else
+		perror("VIDIOC_REQBUFS");
+
+	exit(EXIT_FAILURE);
+}
+      </programlisting>
+    </example>
+
+    <para>The buffer (plane) file descriptor is passed on the fly with the
+&VIDIOC-QBUF; ioctl. In case of multiplanar buffers, every plane can be
+associated with a different DMABUF descriptor. Although buffers are commonly
+cycled, applications can pass a different DMABUF descriptor at each
+<constant>VIDIOC_QBUF</constant> call.</para>
+
+    <example>
+      <title>Queueing DMABUF using single plane API</title>
+
+      <programlisting>
+int buffer_queue(int v4lfd, int index, int dmafd)
+{
+	&v4l2-buffer; buf;
+
+	memset(&amp;buf, 0, sizeof buf);
+	buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	buf.memory = V4L2_MEMORY_DMABUF;
+	buf.index = index;
+	buf.m.fd = dmafd;
+
+	if (ioctl(v4lfd, &VIDIOC-QBUF;, &amp;buf) == -1) {
+		perror("VIDIOC_QBUF");
+		return -1;
+	}
+
+	return 0;
+}
+      </programlisting>
+    </example>
+
+    <example>
+      <title>Queueing DMABUF using multi plane API</title>
+
+      <programlisting>
+int buffer_queue_mp(int v4lfd, int index, int dmafd[], int n_planes)
+{
+	&v4l2-buffer; buf;
+	&v4l2-plane; planes[VIDEO_MAX_PLANES];
+	int i;
+
+	memset(&amp;buf, 0, sizeof buf);
+	buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE;
+	buf.memory = V4L2_MEMORY_DMABUF;
+	buf.index = index;
+	buf.m.planes = planes;
+	buf.length = n_planes;
+
+	memset(&amp;planes, 0, sizeof planes);
+
+	for (i = 0; i &lt; n_planes; ++i)
+		buf.m.planes[i].m.fd = dmafd[i];
+
+	if (ioctl(v4lfd, &VIDIOC-QBUF;, &amp;buf) == -1) {
+		perror("VIDIOC_QBUF");
+		return -1;
+	}
+
+	return 0;
+}
+      </programlisting>
+    </example>
+
+    <para>Captured or displayed buffers are dequeued with the
+&VIDIOC-DQBUF; ioctl. The driver can unlock the buffer at any
+time between the completion of the DMA and this ioctl. The memory is
+also unlocked when &VIDIOC-STREAMOFF; is called, &VIDIOC-REQBUFS;, or
+when the device is closed.</para>
+
+    <para>For capturing applications it is customary to enqueue a
+number of empty buffers, to start capturing and enter the read loop.
+Here the application waits until a filled buffer can be dequeued, and
+re-enqueues the buffer when the data is no longer needed. Output
+applications fill and enqueue buffers, when enough buffers are stacked
+up output is started. In the write loop, when the application
+runs out of free buffers it must wait until an empty buffer can be
+dequeued and reused. Two methods exist to suspend execution of the
+application until one or more buffers can be dequeued. By default
+<constant>VIDIOC_DQBUF</constant> blocks when no buffer is in the
+outgoing queue. When the <constant>O_NONBLOCK</constant> flag was
+given to the &func-open; function, <constant>VIDIOC_DQBUF</constant>
+returns immediately with an &EAGAIN; when no buffer is available. The
+&func-select; and &func-poll; functions are always available.</para>
+
+    <para>To start and stop capturing or displaying applications call the
+&VIDIOC-STREAMON; and &VIDIOC-STREAMOFF; ioctls. Note that
+<constant>VIDIOC_STREAMOFF</constant> removes all buffers from both queues and
+unlocks all buffers as a side effect. Since there is no notion of doing
+anything "now" on a multitasking system, if an application needs to synchronize
+with another event it should examine the &v4l2-buffer;
+<structfield>timestamp</structfield> of captured buffers, or set the field
+before enqueuing buffers for output.</para>
+
+    <para>Drivers implementing DMABUF importing I/O must support the
+<constant>VIDIOC_REQBUFS</constant>, <constant>VIDIOC_QBUF</constant>,
+<constant>VIDIOC_DQBUF</constant>, <constant>VIDIOC_STREAMON</constant> and
+<constant>VIDIOC_STREAMOFF</constant> ioctls, and the
+<function>select()</function> and <function>poll()</function> functions.</para>
+
+  </section>
+
   <section id="async">
     <title>Asynchronous I/O</title>
 
@@ -582,17 +741,19 @@ applications when an output stream.</entry>
 	    <entry>struct timeval</entry>
 	    <entry><structfield>timestamp</structfield></entry>
 	    <entry></entry>
-	    <entry><para>For input streams this is the
-system time (as returned by the <function>gettimeofday()</function>
-function) when the first data byte was captured. For output streams
-the data will not be displayed before this time, secondary to the
-nominal frame rate determined by the current video standard in
-enqueued order. Applications can for example zero this field to
-display frames as soon as possible. The driver stores the time at
-which the first data byte was actually sent out in the
-<structfield>timestamp</structfield> field. This permits
-applications to monitor the drift between the video and system
-clock.</para></entry>
+	    <entry><para>For input streams this is time when the first data
+	    byte was captured, as returned by the
+	    <function>clock_gettime()</function> function for the relevant
+	    clock id; see <constant>V4L2_BUF_FLAG_TIMESTAMP_*</constant> in
+	    <xref linkend="buffer-flags" />. For output streams the data
+	    will not be displayed before this time, secondary to the nominal
+	    frame rate determined by the current video standard in enqueued
+	    order. Applications can for example zero this field to display
+	    frames as soon as possible. The driver stores the time at which
+	    the first data byte was actually sent out in the
+	    <structfield>timestamp</structfield> field. This permits
+	    applications to monitor the drift between the video and system
+	    clock.</para></entry>
 	  </row>
 	  <row>
 	    <entry>&v4l2-timecode;</entry>
@@ -672,6 +833,14 @@ memory, set by the application. See <xref linkend="userp" /> for details.
 	    in the <structfield>length</structfield> field of this
 	    <structname>v4l2_buffer</structname> structure.</entry>
 	  </row>
+	  <row>
+	    <entry></entry>
+	    <entry>int</entry>
+	    <entry><structfield>fd</structfield></entry>
+	    <entry>For the single-plane API and when
+<structfield>memory</structfield> is <constant>V4L2_MEMORY_DMABUF</constant> this
+is the file descriptor associated with a DMABUF buffer.</entry>
+	  </row>
 	  <row>
 	    <entry>__u32</entry>
 	    <entry><structfield>length</structfield></entry>
@@ -736,13 +905,22 @@ should set this to 0.</entry>
 	  </row>
 	  <row>
 	    <entry></entry>
-	    <entry>__unsigned long</entry>
+	    <entry>unsigned long</entry>
 	    <entry><structfield>userptr</structfield></entry>
 	    <entry>When the memory type in the containing &v4l2-buffer; is
 	      <constant>V4L2_MEMORY_USERPTR</constant>, this is a userspace
 	      pointer to the memory allocated for this plane by an application.
 	      </entry>
 	  </row>
+	  <row>
+	    <entry></entry>
+	    <entry>int</entry>
+	    <entry><structfield>fd</structfield></entry>
+	    <entry>When the memory type in the containing &v4l2-buffer; is
+		<constant>V4L2_MEMORY_DMABUF</constant>, this is a file
+		descriptor associated with a DMABUF buffer, similar to the
+		<structfield>fd</structfield> field in &v4l2-buffer;.</entry>
+	  </row>
 	  <row>
 	    <entry>__u32</entry>
 	    <entry><structfield>data_offset</structfield></entry>
@@ -923,7 +1101,7 @@ application. Drivers set or clear this flag when the
 	  </row>
 	  <row>
 	    <entry><constant>V4L2_BUF_FLAG_NO_CACHE_INVALIDATE</constant></entry>
-	    <entry>0x0400</entry>
+	    <entry>0x0800</entry>
 	    <entry>Caches do not have to be invalidated for this buffer.
 Typically applications shall use this flag if the data captured in the buffer
 is not going to be touched by the CPU, instead the buffer will, probably, be
@@ -932,12 +1110,41 @@ passed on to a DMA-capable hardware unit for further processing or output.
 	  </row>
 	  <row>
 	    <entry><constant>V4L2_BUF_FLAG_NO_CACHE_CLEAN</constant></entry>
-	    <entry>0x0800</entry>
+	    <entry>0x1000</entry>
 	    <entry>Caches do not have to be cleaned for this buffer.
 Typically applications shall use this flag for output buffers if the data
 in this buffer has not been created by the CPU but by some DMA-capable unit,
 in which case caches have not been used.</entry>
 	  </row>
+	  <row>
+	    <entry><constant>V4L2_BUF_FLAG_TIMESTAMP_MASK</constant></entry>
+	    <entry>0xe000</entry>
+	    <entry>Mask for timestamp types below. To test the
+	    timestamp type, mask out bits not belonging to timestamp
+	    type by performing a logical and operation with buffer
+	    flags and timestamp mask.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>V4L2_BUF_FLAG_TIMESTAMP_UNKNOWN</constant></entry>
+	    <entry>0x0000</entry>
+	    <entry>Unknown timestamp type. This type is used by
+	    drivers before Linux 3.9 and may be either monotonic (see
+	    below) or realtime (wall clock). Monotonic clock has been
+	    favoured in embedded systems whereas most of the drivers
+	    use the realtime clock. Either kinds of timestamps are
+	    available in user space via
+	    <function>clock_gettime(2)</function> using clock IDs
+	    <constant>CLOCK_MONOTONIC</constant> and
+	    <constant>CLOCK_REALTIME</constant>, respectively.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC</constant></entry>
+	    <entry>0x2000</entry>
+	    <entry>The buffer timestamp has been taken from the
+	    <constant>CLOCK_MONOTONIC</constant> clock. To access the
+	    same clock outside V4L2, use
+	    <function>clock_gettime(2)</function> .</entry>
+	  </row>
 	</tbody>
       </tgroup>
     </table>
@@ -964,6 +1171,12 @@ pointer</link> I/O.</entry>
 	    <entry>3</entry>
 	    <entry>[to do]</entry>
 	  </row>
+	  <row>
+	    <entry><constant>V4L2_MEMORY_DMABUF</constant></entry>
+	    <entry>4</entry>
+	    <entry>The buffer is used for <link linkend="dmabuf">DMA shared
+buffer</link> I/O.</entry>
+	  </row>
 	</tbody>
       </tgroup>
     </table>

Documentation/DocBook/media/v4l/pixfmt-nv12m.xml

@@ -6,7 +6,7 @@
       <refnamediv>
 	<refname id="V4L2-PIX-FMT-NV12M"><constant>V4L2_PIX_FMT_NV12M</constant></refname>
 	<refname id="V4L2-PIX-FMT-NV21M"><constant>V4L2_PIX_FMT_NV21M</constant></refname>
-	<refname id="V4L2-PIX-FMT-NV12MT_16X16"><constant>V4L2_PIX_FMT_NV12MT_16X16</constant></refname>
+	<refname id="V4L2-PIX-FMT-NV12MT-16X16"><constant>V4L2_PIX_FMT_NV12MT_16X16</constant></refname>
 	<refpurpose>Variation of <constant>V4L2_PIX_FMT_NV12</constant> and <constant>V4L2_PIX_FMT_NV21</constant> with planes
 	  non contiguous in memory. </refpurpose>
       </refnamediv>

Documentation/DocBook/media/v4l/pixfmt-srggb10alaw8.xml

@@ -0,0 +1,34 @@
+	<refentry>
+	  <refmeta>
+	    <refentrytitle>
+	      V4L2_PIX_FMT_SBGGR10ALAW8 ('aBA8'),
+	      V4L2_PIX_FMT_SGBRG10ALAW8 ('aGA8'),
+	      V4L2_PIX_FMT_SGRBG10ALAW8 ('agA8'),
+	      V4L2_PIX_FMT_SRGGB10ALAW8 ('aRA8'),
+	    </refentrytitle>
+	    &manvol;
+	  </refmeta>
+	  <refnamediv>
+	    <refname id="V4L2-PIX-FMT-SBGGR10ALAW8">
+	      <constant>V4L2_PIX_FMT_SBGGR10ALAW8</constant>
+	    </refname>
+	    <refname id="V4L2-PIX-FMT-SGBRG10ALAW8">
+	      <constant>V4L2_PIX_FMT_SGBRG10ALAW8</constant>
+	    </refname>
+	    <refname id="V4L2-PIX-FMT-SGRBG10ALAW8">
+	      <constant>V4L2_PIX_FMT_SGRBG10ALAW8</constant>
+	    </refname>
+	    <refname id="V4L2-PIX-FMT-SRGGB10ALAW8">
+	      <constant>V4L2_PIX_FMT_SRGGB10ALAW8</constant>
+	    </refname>
+	    <refpurpose>10-bit Bayer formats compressed to 8 bits</refpurpose>
+	  </refnamediv>
+	  <refsect1>
+	    <title>Description</title>
+	    <para>The following four pixel formats are raw sRGB / Bayer
+	    formats with 10 bits per color compressed to 8 bits each,
+	    using the A-LAW algorithm. Each color component consumes 8
+	    bits of memory. In other respects this format is similar to
+	    <xref linkend="V4L2-PIX-FMT-SRGGB8"></xref>.</para>
+	  </refsect1>
+	</refentry>

Documentation/DocBook/media/v4l/pixfmt-uv8.xml

@@ -0,0 +1,62 @@
+	<refentry id="V4L2-PIX-FMT-UV8">
+	  <refmeta>
+	    <refentrytitle>V4L2_PIX_FMT_UV8  ('UV8')</refentrytitle>
+	    &manvol;
+	  </refmeta>
+	  <refnamediv>
+	    <refname><constant>V4L2_PIX_FMT_UV8</constant></refname>
+	    <refpurpose>UV plane interleaved</refpurpose>
+	  </refnamediv>
+	  <refsect1>
+	    <title>Description</title>
+	    <para>In this format there is no Y plane, Only CbCr plane. ie
+	    (UV interleaved)</para>
+	    <example>
+	    <title>
+	      <constant>V4L2_PIX_FMT_UV8</constant>
+	       pixel image
+	    </title>
+
+	    <formalpara>
+	      <title>Byte Order.</title>
+	      <para>Each cell is one byte.
+	        <informaltable frame="none">
+	        <tgroup cols="5" align="center">
+		  <colspec align="left" colwidth="2*" />
+		  <tbody valign="top">
+		    <row>
+		      <entry>start&nbsp;+&nbsp;0:</entry>
+		      <entry>Cb<subscript>00</subscript></entry>
+		      <entry>Cr<subscript>00</subscript></entry>
+		      <entry>Cb<subscript>01</subscript></entry>
+		      <entry>Cr<subscript>01</subscript></entry>
+		    </row>
+		    <row>
+		      <entry>start&nbsp;+&nbsp;4:</entry>
+		      <entry>Cb<subscript>10</subscript></entry>
+		      <entry>Cr<subscript>10</subscript></entry>
+		      <entry>Cb<subscript>11</subscript></entry>
+		      <entry>Cr<subscript>11</subscript></entry>
+		    </row>
+		    <row>
+		      <entry>start&nbsp;+&nbsp;8:</entry>
+		      <entry>Cb<subscript>20</subscript></entry>
+		      <entry>Cr<subscript>20</subscript></entry>
+		      <entry>Cb<subscript>21</subscript></entry>
+		      <entry>Cr<subscript>21</subscript></entry>
+		    </row>
+		    <row>
+		      <entry>start&nbsp;+&nbsp;12:</entry>
+		      <entry>Cb<subscript>30</subscript></entry>
+		      <entry>Cr<subscript>30</subscript></entry>
+		      <entry>Cb<subscript>31</subscript></entry>
+		      <entry>Cr<subscript>31</subscript></entry>
+		    </row>
+		  </tbody>
+		</tgroup>
+		</informaltable>
+	      </para>
+	      </formalpara>
+	    </example>
+	  </refsect1>
+	</refentry>

Documentation/DocBook/media/v4l/pixfmt.xml

@@ -673,6 +673,7 @@ access the palette, this must be done with ioctls of the Linux framebuffer API.<
     &sub-srggb8;
     &sub-sbggr16;
     &sub-srggb10;
+    &sub-srggb10alaw8;
     &sub-srggb10dpcm8;
     &sub-srggb12;
   </section>
@@ -701,6 +702,7 @@ information.</para>
     &sub-y12;
     &sub-y10b;
     &sub-y16;
+    &sub-uv8;
     &sub-yuyv;
     &sub-uyvy;
     &sub-yvyu;

Documentation/DocBook/media/v4l/subdev-formats.xml

@@ -353,9 +353,9 @@
 	<listitem><para>The number of bits per pixel component. All components are
 	transferred on the same number of bits. Common values are 8, 10 and 12.</para>
 	</listitem>
-	<listitem><para>If the pixel components are DPCM-compressed, a mention of the
-	DPCM compression and the number of bits per compressed pixel component.</para>
-	</listitem>
+	<listitem><para>The compression (optional). If the pixel components are
+	ALAW- or DPCM-compressed, a mention of the compression scheme and the
+	number of bits per compressed pixel component.</para></listitem>
 	<listitem><para>The number of bus samples per pixel. Pixels that are wider than
 	the bus width must be transferred in multiple samples. Common values are
 	1 and 2.</para></listitem>
@@ -504,6 +504,74 @@
 	      <entry>r<subscript>1</subscript></entry>
 	      <entry>r<subscript>0</subscript></entry>
 	    </row>
+	    <row id="V4L2-MBUS-FMT-SBGGR10-ALAW8-1X8">
+	      <entry>V4L2_MBUS_FMT_SBGGR10_ALAW8_1X8</entry>
+	      <entry>0x3015</entry>
+	      <entry></entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>b<subscript>7</subscript></entry>
+	      <entry>b<subscript>6</subscript></entry>
+	      <entry>b<subscript>5</subscript></entry>
+	      <entry>b<subscript>4</subscript></entry>
+	      <entry>b<subscript>3</subscript></entry>
+	      <entry>b<subscript>2</subscript></entry>
+	      <entry>b<subscript>1</subscript></entry>
+	      <entry>b<subscript>0</subscript></entry>
+	    </row>
+	    <row id="V4L2-MBUS-FMT-SGBRG10-ALAW8-1X8">
+	      <entry>V4L2_MBUS_FMT_SGBRG10_ALAW8_1X8</entry>
+	      <entry>0x3016</entry>
+	      <entry></entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>g<subscript>7</subscript></entry>
+	      <entry>g<subscript>6</subscript></entry>
+	      <entry>g<subscript>5</subscript></entry>
+	      <entry>g<subscript>4</subscript></entry>
+	      <entry>g<subscript>3</subscript></entry>
+	      <entry>g<subscript>2</subscript></entry>
+	      <entry>g<subscript>1</subscript></entry>
+	      <entry>g<subscript>0</subscript></entry>
+	    </row>
+	    <row id="V4L2-MBUS-FMT-SGRBG10-ALAW8-1X8">
+	      <entry>V4L2_MBUS_FMT_SGRBG10_ALAW8_1X8</entry>
+	      <entry>0x3017</entry>
+	      <entry></entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>g<subscript>7</subscript></entry>
+	      <entry>g<subscript>6</subscript></entry>
+	      <entry>g<subscript>5</subscript></entry>
+	      <entry>g<subscript>4</subscript></entry>
+	      <entry>g<subscript>3</subscript></entry>
+	      <entry>g<subscript>2</subscript></entry>
+	      <entry>g<subscript>1</subscript></entry>
+	      <entry>g<subscript>0</subscript></entry>
+	    </row>
+	    <row id="V4L2-MBUS-FMT-SRGGB10-ALAW8-1X8">
+	      <entry>V4L2_MBUS_FMT_SRGGB10_ALAW8_1X8</entry>
+	      <entry>0x3018</entry>
+	      <entry></entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>r<subscript>7</subscript></entry>
+	      <entry>r<subscript>6</subscript></entry>
+	      <entry>r<subscript>5</subscript></entry>
+	      <entry>r<subscript>4</subscript></entry>
+	      <entry>r<subscript>3</subscript></entry>
+	      <entry>r<subscript>2</subscript></entry>
+	      <entry>r<subscript>1</subscript></entry>
+	      <entry>r<subscript>0</subscript></entry>
+	    </row>
 	    <row id="V4L2-MBUS-FMT-SBGGR10-DPCM8-1X8">
 	      <entry>V4L2_MBUS_FMT_SBGGR10_DPCM8_1X8</entry>
 	      <entry>0x300b</entry>
@@ -853,10 +921,16 @@
       <title>Packed YUV Formats</title>
 
       <para>Those data formats transfer pixel data as (possibly downsampled) Y, U
-      and V components. The format code is made of the following information.
+      and V components. Some formats include dummy bits in some of their samples
+      and are collectively referred to as "YDYC" (Y-Dummy-Y-Chroma) formats.
+      One cannot rely on the values of these dummy bits as those are undefined.
+      </para>
+      <para>The format code is made of the following information.
       <itemizedlist>
 	<listitem><para>The Y, U and V components order code, as transferred on the
-	bus. Possible values are YUYV, UYVY, YVYU and VYUY.</para></listitem>
+	bus. Possible values are YUYV, UYVY, YVYU and VYUY for formats with no
+	dummy bit, and YDYUYDYV, YDYVYDYU, YUYDYVYD and YVYDYUYD for YDYC formats.
+	</para></listitem>
 	<listitem><para>The number of bits per pixel component. All components are
 	transferred on the same number of bits. Common values are 8, 10 and 12.</para>
 	</listitem>
@@ -877,7 +951,21 @@
       U, Y, V, Y order will be named <constant>V4L2_MBUS_FMT_UYVY8_2X8</constant>.
       </para>
 
-      <para>The following table lisst existing packet YUV formats.</para>
+	<para><xref linkend="v4l2-mbus-pixelcode-yuv8"/> list existing packet YUV
+	formats and describes the organization of each pixel data in each sample.
+	When a format pattern is split across multiple samples each of the samples
+	in the pattern is described.</para>
+
+	<para>The role of each bit transferred over the bus is identified by one
+	of the following codes.</para>
+
+	<itemizedlist>
+	   <listitem><para>y<subscript>x</subscript> for luma component bit number x</para></listitem>
+	   <listitem><para>u<subscript>x</subscript> for blue chroma component bit number x</para></listitem>
+	   <listitem><para>v<subscript>x</subscript> for red chroma component bit number x</para></listitem>
+	   <listitem><para>- for non-available bits (for positions higher than the bus width)</para></listitem>
+	   <listitem><para>d for dummy bits</para></listitem>
+	</itemizedlist>
 
       <table pgwide="0" frame="none" id="v4l2-mbus-pixelcode-yuv8">
 	<title>YUV Formats</title>
@@ -885,27 +973,37 @@
 	  <colspec colname="id" align="left" />
 	  <colspec colname="code" align="center"/>
 	  <colspec colname="bit" />
-	  <colspec colnum="4" colname="b19" align="center" />
-	  <colspec colnum="5" colname="b18" align="center" />
-	  <colspec colnum="6" colname="b17" align="center" />
-	  <colspec colnum="7" colname="b16" align="center" />
-	  <colspec colnum="8" colname="b15" align="center" />
-	  <colspec colnum="9" colname="b14" align="center" />
-	  <colspec colnum="10" colname="b13" align="center" />
-	  <colspec colnum="11" colname="b12" align="center" />
-	  <colspec colnum="12" colname="b11" align="center" />
-	  <colspec colnum="13" colname="b10" align="center" />
-	  <colspec colnum="14" colname="b09" align="center" />
-	  <colspec colnum="15" colname="b08" align="center" />
-	  <colspec colnum="16" colname="b07" align="center" />
-	  <colspec colnum="17" colname="b06" align="center" />
-	  <colspec colnum="18" colname="b05" align="center" />
-	  <colspec colnum="19" colname="b04" align="center" />
-	  <colspec colnum="20" colname="b03" align="center" />
-	  <colspec colnum="21" colname="b02" align="center" />
-	  <colspec colnum="22" colname="b01" align="center" />
-	  <colspec colnum="23" colname="b00" align="center" />
-	  <spanspec namest="b19" nameend="b00" spanname="b0" />
+	  <colspec colnum="4" colname="b29" align="center" />
+	  <colspec colnum="5" colname="b28" align="center" />
+	  <colspec colnum="6" colname="b27" align="center" />
+	  <colspec colnum="7" colname="b26" align="center" />
+	  <colspec colnum="8" colname="b25" align="center" />
+	  <colspec colnum="9" colname="b24" align="center" />
+	  <colspec colnum="10" colname="b23" align="center" />
+	  <colspec colnum="11" colname="b22" align="center" />
+	  <colspec colnum="12" colname="b21" align="center" />
+	  <colspec colnum="13" colname="b20" align="center" />
+	  <colspec colnum="14" colname="b19" align="center" />
+	  <colspec colnum="15" colname="b18" align="center" />
+	  <colspec colnum="16" colname="b17" align="center" />
+	  <colspec colnum="17" colname="b16" align="center" />
+	  <colspec colnum="18" colname="b15" align="center" />
+	  <colspec colnum="19" colname="b14" align="center" />
+	  <colspec colnum="20" colname="b13" align="center" />
+	  <colspec colnum="21" colname="b12" align="center" />
+	  <colspec colnum="22" colname="b11" align="center" />
+	  <colspec colnum="23" colname="b10" align="center" />
+	  <colspec colnum="24" colname="b09" align="center" />
+	  <colspec colnum="25" colname="b08" align="center" />
+	  <colspec colnum="26" colname="b07" align="center" />
+	  <colspec colnum="27" colname="b06" align="center" />
+	  <colspec colnum="28" colname="b05" align="center" />
+	  <colspec colnum="29" colname="b04" align="center" />
+	  <colspec colnum="30" colname="b03" align="center" />
+	  <colspec colnum="31" colname="b02" align="center" />
+	  <colspec colnum="32" colname="b01" align="center" />
+	  <colspec colnum="33" colname="b00" align="center" />
+	  <spanspec namest="b29" nameend="b00" spanname="b0" />
 	  <thead>
 	    <row>
 	      <entry>Identifier</entry>
@@ -917,6 +1015,16 @@
 	      <entry></entry>
 	      <entry></entry>
 	      <entry>Bit</entry>
+	      <entry>29</entry>
+	      <entry>28</entry>
+	      <entry>27</entry>
+	      <entry>26</entry>
+	      <entry>25</entry>
+	      <entry>24</entry>
+	      <entry>23</entry>
+	      <entry>22</entry>
+	      <entry>21</entry>
+	      <entry>10</entry>
 	      <entry>19</entry>
 	      <entry>18</entry>
 	      <entry>17</entry>
@@ -944,16 +1052,8 @@
 	      <entry>V4L2_MBUS_FMT_Y8_1X8</entry>
 	      <entry>0x2001</entry>
 	      <entry></entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
+	      &dash-ent-10;
+	      &dash-ent-10;
 	      <entry>-</entry>
 	      <entry>-</entry>
 	      <entry>y<subscript>7</subscript></entry>
@@ -965,9 +1065,9 @@
 	      <entry>y<subscript>1</subscript></entry>
 	      <entry>y<subscript>0</subscript></entry>
 	    </row>
-	    <row id="V4L2-MBUS-FMT-UYVY8-1_5X8">
-	      <entry>V4L2_MBUS_FMT_UYVY8_1_5X8</entry>
-	      <entry>0x2002</entry>
+	    <row id="V4L2-MBUS-FMT-UV8-1X8">
+	      <entry>V4L2_MBUS_FMT_UV8_1X8</entry>
+	      <entry>0x2015</entry>
 	      <entry></entry>
 	      <entry>-</entry>
 	      <entry>-</entry>
@@ -1006,6 +1106,40 @@
 	      <entry>-</entry>
 	      <entry>-</entry>
 	      <entry>-</entry>
+	      <entry>v<subscript>7</subscript></entry>
+	      <entry>v<subscript>6</subscript></entry>
+	      <entry>v<subscript>5</subscript></entry>
+	      <entry>v<subscript>4</subscript></entry>
+	      <entry>v<subscript>3</subscript></entry>
+	      <entry>v<subscript>2</subscript></entry>
+	      <entry>v<subscript>1</subscript></entry>
+	      <entry>v<subscript>0</subscript></entry>
+	    </row>
+	    <row id="V4L2-MBUS-FMT-UYVY8-1_5X8">
+	      <entry>V4L2_MBUS_FMT_UYVY8_1_5X8</entry>
+	      <entry>0x2002</entry>
+	      <entry></entry>
+	      &dash-ent-10;
+	      &dash-ent-10;
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>u<subscript>7</subscript></entry>
+	      <entry>u<subscript>6</subscript></entry>
+	      <entry>u<subscript>5</subscript></entry>
+	      <entry>u<subscript>4</subscript></entry>
+	      <entry>u<subscript>3</subscript></entry>
+	      <entry>u<subscript>2</subscript></entry>
+	      <entry>u<subscript>1</subscript></entry>
+	      <entry>u<subscript>0</subscript></entry>
+	    </row>
+	    <row>
+	      <entry></entry>
+	      <entry></entry>
+	      <entry></entry>
+	      &dash-ent-10;
+	      &dash-ent-10;
+	      <entry>-</entry>
+	      <entry>-</entry>
 	      <entry>y<subscript>7</subscript></entry>
 	      <entry>y<subscript>6</subscript></entry>
 	      <entry>y<subscript>5</subscript></entry>
@@ -1019,16 +1153,8 @@
 	      <entry></entry>
 	      <entry></entry>
 	      <entry></entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
+	      &dash-ent-10;
+	      &dash-ent-10;
 	      <entry>-</entry>
 	      <entry>-</entry>
 	      <entry>y<subscript>7</subscript></entry>
@@ -1044,16 +1170,8 @@
 	      <entry></entry>
 	      <entry></entry>
 	      <entry></entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
+	      &dash-ent-10;
+	      &dash-ent-10;
 	      <entry>-</entry>
 	      <entry>-</entry>
 	      <entry>v<subscript>7</subscript></entry>
@@ -1069,16 +1187,8 @@
 	      <entry></entry>
 	      <entry></entry>
 	      <entry></entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
+	      &dash-ent-10;
+	      &dash-ent-10;
 	      <entry>-</entry>
 	      <entry>-</entry>
 	      <entry>y<subscript>7</subscript></entry>
@@ -1094,16 +1204,8 @@
 	      <entry></entry>
 	      <entry></entry>
 	      <entry></entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
+	      &dash-ent-10;
+	      &dash-ent-10;
 	      <entry>-</entry>
 	      <entry>-</entry>
 	      <entry>y<subscript>7</subscript></entry>
@@ -1119,16 +1221,8 @@
 	      <entry>V4L2_MBUS_FMT_VYUY8_1_5X8</entry>
 	      <entry>0x2003</entry>
 	      <entry></entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
+	      &dash-ent-10;
+	      &dash-ent-10;
 	      <entry>-</entry>
 	      <entry>-</entry>
 	      <entry>v<subscript>7</subscript></entry>
@@ -1144,16 +1238,8 @@
 	      <entry></entry>
 	      <entry></entry>
 	      <entry></entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
+	      &dash-ent-10;
+	      &dash-ent-10;
 	      <entry>-</entry>
 	      <entry>-</entry>
 	      <entry>y<subscript>7</subscript></entry>
@@ -1169,16 +1255,8 @@
 	      <entry></entry>
 	      <entry></entry>
 	      <entry></entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
+	      &dash-ent-10;
+	      &dash-ent-10;
 	      <entry>-</entry>
 	      <entry>-</entry>
 	      <entry>y<subscript>7</subscript></entry>
@@ -1194,16 +1272,8 @@
 	      <entry></entry>
 	      <entry></entry>
 	      <entry></entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
+	      &dash-ent-10;
+	      &dash-ent-10;
 	      <entry>-</entry>
 	      <entry>-</entry>
 	      <entry>u<subscript>7</subscript></entry>
@@ -1219,16 +1289,8 @@
 	      <entry></entry>
 	      <entry></entry>
 	      <entry></entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
+	      &dash-ent-10;
+	      &dash-ent-10;
 	      <entry>-</entry>
 	      <entry>-</entry>
 	      <entry>y<subscript>7</subscript></entry>
@@ -1244,16 +1306,8 @@
 	      <entry></entry>
 	      <entry></entry>
 	      <entry></entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
+	      &dash-ent-10;
+	      &dash-ent-10;
 	      <entry>-</entry>
 	      <entry>-</entry>
 	      <entry>y<subscript>7</subscript></entry>
@@ -1269,16 +1323,8 @@
 	      <entry>V4L2_MBUS_FMT_YUYV8_1_5X8</entry>
 	      <entry>0x2004</entry>
 	      <entry></entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
+	      &dash-ent-10;
+	      &dash-ent-10;
 	      <entry>-</entry>
 	      <entry>-</entry>
 	      <entry>y<subscript>7</subscript></entry>
@@ -1294,16 +1340,8 @@
 	      <entry></entry>
 	      <entry></entry>
 	      <entry></entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
+	      &dash-ent-10;
+	      &dash-ent-10;
 	      <entry>-</entry>
 	      <entry>-</entry>
 	      <entry>y<subscript>7</subscript></entry>
@@ -1319,16 +1357,8 @@
 	      <entry></entry>
 	      <entry></entry>
 	      <entry></entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
+	      &dash-ent-10;
+	      &dash-ent-10;
 	      <entry>-</entry>
 	      <entry>-</entry>
 	      <entry>u<subscript>7</subscript></entry>
@@ -1344,16 +1374,8 @@
 	      <entry></entry>
 	      <entry></entry>
 	      <entry></entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
+	      &dash-ent-10;
+	      &dash-ent-10;
 	      <entry>-</entry>
 	      <entry>-</entry>
 	      <entry>y<subscript>7</subscript></entry>
@@ -1369,16 +1391,8 @@
 	      <entry></entry>
 	      <entry></entry>
 	      <entry></entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
+	      &dash-ent-10;
+	      &dash-ent-10;
 	      <entry>-</entry>
 	      <entry>-</entry>
 	      <entry>y<subscript>7</subscript></entry>
@@ -1394,16 +1408,8 @@
 	      <entry></entry>
 	      <entry></entry>
 	      <entry></entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
+	      &dash-ent-10;
+	      &dash-ent-10;
 	      <entry>-</entry>
 	      <entry>-</entry>
 	      <entry>v<subscript>7</subscript></entry>
@@ -1419,16 +1425,8 @@
 	      <entry>V4L2_MBUS_FMT_YVYU8_1_5X8</entry>
 	      <entry>0x2005</entry>
 	      <entry></entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
+	      &dash-ent-10;
+	      &dash-ent-10;
 	      <entry>-</entry>
 	      <entry>-</entry>
 	      <entry>y<subscript>7</subscript></entry>
@@ -1444,16 +1442,8 @@
 	      <entry></entry>
 	      <entry></entry>
 	      <entry></entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
+	      &dash-ent-10;
+	      &dash-ent-10;
 	      <entry>-</entry>
 	      <entry>-</entry>
 	      <entry>y<subscript>7</subscript></entry>
@@ -1469,16 +1459,8 @@
 	      <entry></entry>
 	      <entry></entry>
 	      <entry></entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
+	      &dash-ent-10;
+	      &dash-ent-10;
 	      <entry>-</entry>
 	      <entry>-</entry>
 	      <entry>v<subscript>7</subscript></entry>
@@ -1494,16 +1476,8 @@
 	      <entry></entry>
 	      <entry></entry>
 	      <entry></entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
+	      &dash-ent-10;
+	      &dash-ent-10;
 	      <entry>-</entry>
 	      <entry>-</entry>
 	      <entry>y<subscript>7</subscript></entry>
@@ -1519,16 +1493,8 @@
 	      <entry></entry>
 	      <entry></entry>
 	      <entry></entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
+	      &dash-ent-10;
+	      &dash-ent-10;
 	      <entry>-</entry>
 	      <entry>-</entry>
 	      <entry>y<subscript>7</subscript></entry>
@@ -1544,16 +1510,8 @@
 	      <entry></entry>
 	      <entry></entry>
 	      <entry></entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
+	      &dash-ent-10;
+	      &dash-ent-10;
 	      <entry>-</entry>
 	      <entry>-</entry>
 	      <entry>u<subscript>7</subscript></entry>
@@ -1569,16 +1527,8 @@
 	      <entry>V4L2_MBUS_FMT_UYVY8_2X8</entry>
 	      <entry>0x2006</entry>
 	      <entry></entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
+	      &dash-ent-10;
+	      &dash-ent-10;
 	      <entry>-</entry>
 	      <entry>-</entry>
 	      <entry>u<subscript>7</subscript></entry>
@@ -1594,16 +1544,8 @@
 	      <entry></entry>
 	      <entry></entry>
 	      <entry></entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
+	      &dash-ent-10;
+	      &dash-ent-10;
 	      <entry>-</entry>
 	      <entry>-</entry>
 	      <entry>y<subscript>7</subscript></entry>
@@ -1619,16 +1561,8 @@
 	      <entry></entry>
 	      <entry></entry>
 	      <entry></entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
+	      &dash-ent-10;
+	      &dash-ent-10;
 	      <entry>-</entry>
 	      <entry>-</entry>
 	      <entry>v<subscript>7</subscript></entry>
@@ -1644,16 +1578,8 @@
 	      <entry></entry>
 	      <entry></entry>
 	      <entry></entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
+	      &dash-ent-10;
+	      &dash-ent-10;
 	      <entry>-</entry>
 	      <entry>-</entry>
 	      <entry>y<subscript>7</subscript></entry>
@@ -1669,16 +1595,8 @@
 	      <entry>V4L2_MBUS_FMT_VYUY8_2X8</entry>
 	      <entry>0x2007</entry>
 	      <entry></entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
+	      &dash-ent-10;
+	      &dash-ent-10;
 	      <entry>-</entry>
 	      <entry>-</entry>
 	      <entry>v<subscript>7</subscript></entry>
@@ -1694,16 +1612,8 @@
 	      <entry></entry>
 	      <entry></entry>
 	      <entry></entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
+	      &dash-ent-10;
+	      &dash-ent-10;
 	      <entry>-</entry>
 	      <entry>-</entry>
 	      <entry>y<subscript>7</subscript></entry>
@@ -1719,16 +1629,8 @@
 	      <entry></entry>
 	      <entry></entry>
 	      <entry></entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
+	      &dash-ent-10;
+	      &dash-ent-10;
 	      <entry>-</entry>
 	      <entry>-</entry>
 	      <entry>u<subscript>7</subscript></entry>
@@ -1744,16 +1646,8 @@
 	      <entry></entry>
 	      <entry></entry>
 	      <entry></entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
+	      &dash-ent-10;
+	      &dash-ent-10;
 	      <entry>-</entry>
 	      <entry>-</entry>
 	      <entry>y<subscript>7</subscript></entry>
@@ -1769,16 +1663,8 @@
 	      <entry>V4L2_MBUS_FMT_YUYV8_2X8</entry>
 	      <entry>0x2008</entry>
 	      <entry></entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
+	      &dash-ent-10;
+	      &dash-ent-10;
 	      <entry>-</entry>
 	      <entry>-</entry>
 	      <entry>y<subscript>7</subscript></entry>
@@ -1794,16 +1680,8 @@
 	      <entry></entry>
 	      <entry></entry>
 	      <entry></entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
+	      &dash-ent-10;
+	      &dash-ent-10;
 	      <entry>-</entry>
 	      <entry>-</entry>
 	      <entry>u<subscript>7</subscript></entry>
@@ -1819,16 +1697,8 @@
 	      <entry></entry>
 	      <entry></entry>
 	      <entry></entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
+	      &dash-ent-10;
+	      &dash-ent-10;
 	      <entry>-</entry>
 	      <entry>-</entry>
 	      <entry>y<subscript>7</subscript></entry>
@@ -1844,16 +1714,8 @@
 	      <entry></entry>
 	      <entry></entry>
 	      <entry></entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
+	      &dash-ent-10;
+	      &dash-ent-10;
 	      <entry>-</entry>
 	      <entry>-</entry>
 	      <entry>v<subscript>7</subscript></entry>
@@ -1869,16 +1731,8 @@
 	      <entry>V4L2_MBUS_FMT_YVYU8_2X8</entry>
 	      <entry>0x2009</entry>
 	      <entry></entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
+	      &dash-ent-10;
+	      &dash-ent-10;
 	      <entry>-</entry>
 	      <entry>-</entry>
 	      <entry>y<subscript>7</subscript></entry>
@@ -1894,16 +1748,8 @@
 	      <entry></entry>
 	      <entry></entry>
 	      <entry></entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
+	      &dash-ent-10;
+	      &dash-ent-10;
 	      <entry>-</entry>
 	      <entry>-</entry>
 	      <entry>v<subscript>7</subscript></entry>
@@ -1919,16 +1765,8 @@
 	      <entry></entry>
 	      <entry></entry>
 	      <entry></entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
+	      &dash-ent-10;
+	      &dash-ent-10;
 	      <entry>-</entry>
 	      <entry>-</entry>
 	      <entry>y<subscript>7</subscript></entry>
@@ -1944,16 +1782,8 @@
 	      <entry></entry>
 	      <entry></entry>
 	      <entry></entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
+	      &dash-ent-10;
+	      &dash-ent-10;
 	      <entry>-</entry>
 	      <entry>-</entry>
 	      <entry>u<subscript>7</subscript></entry>
@@ -1969,16 +1799,8 @@
 	      <entry>V4L2_MBUS_FMT_Y10_1X10</entry>
 	      <entry>0x200a</entry>
 	      <entry></entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
+	      &dash-ent-10;
+	      &dash-ent-10;
 	      <entry>y<subscript>9</subscript></entry>
 	      <entry>y<subscript>8</subscript></entry>
 	      <entry>y<subscript>7</subscript></entry>
@@ -1994,16 +1816,8 @@
 	      <entry>V4L2_MBUS_FMT_YUYV10_2X10</entry>
 	      <entry>0x200b</entry>
 	      <entry></entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
+	      &dash-ent-10;
+	      &dash-ent-10;
 	      <entry>y<subscript>9</subscript></entry>
 	      <entry>y<subscript>8</subscript></entry>
 	      <entry>y<subscript>7</subscript></entry>
@@ -2019,16 +1833,8 @@
 	      <entry></entry>
 	      <entry></entry>
 	      <entry></entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
+	      &dash-ent-10;
+	      &dash-ent-10;
 	      <entry>u<subscript>9</subscript></entry>
 	      <entry>u<subscript>8</subscript></entry>
 	      <entry>u<subscript>7</subscript></entry>
@@ -2044,16 +1850,8 @@
 	      <entry></entry>
 	      <entry></entry>
 	      <entry></entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
+	      &dash-ent-10;
+	      &dash-ent-10;
 	      <entry>y<subscript>9</subscript></entry>
 	      <entry>y<subscript>8</subscript></entry>
 	      <entry>y<subscript>7</subscript></entry>
@@ -2069,16 +1867,8 @@
 	      <entry></entry>
 	      <entry></entry>
 	      <entry></entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
+	      &dash-ent-10;
+	      &dash-ent-10;
 	      <entry>v<subscript>9</subscript></entry>
 	      <entry>v<subscript>8</subscript></entry>
 	      <entry>v<subscript>7</subscript></entry>
@@ -2094,16 +1884,8 @@
 	      <entry>V4L2_MBUS_FMT_YVYU10_2X10</entry>
 	      <entry>0x200c</entry>
 	      <entry></entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
+	      &dash-ent-10;
+	      &dash-ent-10;
 	      <entry>y<subscript>9</subscript></entry>
 	      <entry>y<subscript>8</subscript></entry>
 	      <entry>y<subscript>7</subscript></entry>
@@ -2119,16 +1901,8 @@
 	      <entry></entry>
 	      <entry></entry>
 	      <entry></entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
+	      &dash-ent-10;
+	      &dash-ent-10;
 	      <entry>v<subscript>9</subscript></entry>
 	      <entry>v<subscript>8</subscript></entry>
 	      <entry>v<subscript>7</subscript></entry>
@@ -2144,16 +1918,8 @@
 	      <entry></entry>
 	      <entry></entry>
 	      <entry></entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
+	      &dash-ent-10;
+	      &dash-ent-10;
 	      <entry>y<subscript>9</subscript></entry>
 	      <entry>y<subscript>8</subscript></entry>
 	      <entry>y<subscript>7</subscript></entry>
@@ -2169,16 +1935,8 @@
 	      <entry></entry>
 	      <entry></entry>
 	      <entry></entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
-	      <entry>-</entry>
+	      &dash-ent-10;
+	      &dash-ent-10;
 	      <entry>u<subscript>9</subscript></entry>
 	      <entry>u<subscript>8</subscript></entry>
 	      <entry>u<subscript>7</subscript></entry>
@@ -2194,6 +1952,7 @@
 	      <entry>V4L2_MBUS_FMT_Y12_1X12</entry>
 	      <entry>0x2013</entry>
 	      <entry></entry>
+	      &dash-ent-10;
 	      <entry>-</entry>
 	      <entry>-</entry>
 	      <entry>-</entry>
@@ -2219,6 +1978,7 @@
 	      <entry>V4L2_MBUS_FMT_UYVY8_1X16</entry>
 	      <entry>0x200f</entry>
 	      <entry></entry>
+	      &dash-ent-10;
 	      <entry>-</entry>
 	      <entry>-</entry>
 	      <entry>-</entry>
@@ -2244,6 +2004,7 @@
 	      <entry></entry>
 	      <entry></entry>
 	      <entry></entry>
+	      &dash-ent-10;
 	      <entry>-</entry>
 	      <entry>-</entry>
 	      <entry>-</entry>
@@ -2269,6 +2030,7 @@
 	      <entry>V4L2_MBUS_FMT_VYUY8_1X16</entry>
 	      <entry>0x2010</entry>
 	      <entry></entry>
+	      &dash-ent-10;
 	      <entry>-</entry>
 	      <entry>-</entry>
 	      <entry>-</entry>
@@ -2294,6 +2056,7 @@
 	      <entry></entry>
 	      <entry></entry>
 	      <entry></entry>
+	      &dash-ent-10;
 	      <entry>-</entry>
 	      <entry>-</entry>
 	      <entry>-</entry>
@@ -2319,6 +2082,7 @@
 	      <entry>V4L2_MBUS_FMT_YUYV8_1X16</entry>
 	      <entry>0x2011</entry>
 	      <entry></entry>
+	      &dash-ent-10;
 	      <entry>-</entry>
 	      <entry>-</entry>
 	      <entry>-</entry>
@@ -2344,6 +2108,7 @@
 	      <entry></entry>
 	      <entry></entry>
 	      <entry></entry>
+	      &dash-ent-10;
 	      <entry>-</entry>
 	      <entry>-</entry>
 	      <entry>-</entry>
@@ -2369,6 +2134,7 @@
 	      <entry>V4L2_MBUS_FMT_YVYU8_1X16</entry>
 	      <entry>0x2012</entry>
 	      <entry></entry>
+	      &dash-ent-10;
 	      <entry>-</entry>
 	      <entry>-</entry>
 	      <entry>-</entry>
@@ -2390,6 +2156,57 @@
 	      <entry>v<subscript>1</subscript></entry>
 	      <entry>v<subscript>0</subscript></entry>
 	    </row>
+	    <row>
+	      <entry></entry>
+	      <entry></entry>
+	      <entry></entry>
+	      &dash-ent-10;
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>y<subscript>7</subscript></entry>
+	      <entry>y<subscript>6</subscript></entry>
+	      <entry>y<subscript>5</subscript></entry>
+	      <entry>y<subscript>4</subscript></entry>
+	      <entry>y<subscript>3</subscript></entry>
+	      <entry>y<subscript>2</subscript></entry>
+	      <entry>y<subscript>1</subscript></entry>
+	      <entry>y<subscript>0</subscript></entry>
+	      <entry>u<subscript>7</subscript></entry>
+	      <entry>u<subscript>6</subscript></entry>
+	      <entry>u<subscript>5</subscript></entry>
+	      <entry>u<subscript>4</subscript></entry>
+	      <entry>u<subscript>3</subscript></entry>
+	      <entry>u<subscript>2</subscript></entry>
+	      <entry>u<subscript>1</subscript></entry>
+	      <entry>u<subscript>0</subscript></entry>
+	    </row>
+	    <row id="V4L2-MBUS-FMT-YDYUYDYV8-1X16">
+	      <entry>V4L2_MBUS_FMT_YDYUYDYV8_1X16</entry>
+	      <entry>0x2014</entry>
+	      <entry></entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>y<subscript>7</subscript></entry>
+	      <entry>y<subscript>6</subscript></entry>
+	      <entry>y<subscript>5</subscript></entry>
+	      <entry>y<subscript>4</subscript></entry>
+	      <entry>y<subscript>3</subscript></entry>
+	      <entry>y<subscript>2</subscript></entry>
+	      <entry>y<subscript>1</subscript></entry>
+	      <entry>y<subscript>0</subscript></entry>
+	      <entry>d</entry>
+	      <entry>d</entry>
+	      <entry>d</entry>
+	      <entry>d</entry>
+	      <entry>d</entry>
+	      <entry>d</entry>
+	      <entry>d</entry>
+	      <entry>d</entry>
+	    </row>
 	    <row>
 	      <entry></entry>
 	      <entry></entry>
@@ -2415,10 +2232,61 @@
 	      <entry>u<subscript>1</subscript></entry>
 	      <entry>u<subscript>0</subscript></entry>
 	    </row>
+	    <row>
+	      <entry></entry>
+	      <entry></entry>
+	      <entry></entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>y<subscript>7</subscript></entry>
+	      <entry>y<subscript>6</subscript></entry>
+	      <entry>y<subscript>5</subscript></entry>
+	      <entry>y<subscript>4</subscript></entry>
+	      <entry>y<subscript>3</subscript></entry>
+	      <entry>y<subscript>2</subscript></entry>
+	      <entry>y<subscript>1</subscript></entry>
+	      <entry>y<subscript>0</subscript></entry>
+	      <entry>d</entry>
+	      <entry>d</entry>
+	      <entry>d</entry>
+	      <entry>d</entry>
+	      <entry>d</entry>
+	      <entry>d</entry>
+	      <entry>d</entry>
+	      <entry>d</entry>
+	    </row>
+	    <row>
+	      <entry></entry>
+	      <entry></entry>
+	      <entry></entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>y<subscript>7</subscript></entry>
+	      <entry>y<subscript>6</subscript></entry>
+	      <entry>y<subscript>5</subscript></entry>
+	      <entry>y<subscript>4</subscript></entry>
+	      <entry>y<subscript>3</subscript></entry>
+	      <entry>y<subscript>2</subscript></entry>
+	      <entry>y<subscript>1</subscript></entry>
+	      <entry>y<subscript>0</subscript></entry>
+	      <entry>v<subscript>7</subscript></entry>
+	      <entry>v<subscript>6</subscript></entry>
+	      <entry>v<subscript>5</subscript></entry>
+	      <entry>v<subscript>4</subscript></entry>
+	      <entry>v<subscript>3</subscript></entry>
+	      <entry>v<subscript>2</subscript></entry>
+	      <entry>v<subscript>1</subscript></entry>
+	      <entry>v<subscript>0</subscript></entry>
+	    </row>
 	    <row id="V4L2-MBUS-FMT-YUYV10-1X20">
 	      <entry>V4L2_MBUS_FMT_YUYV10_1X20</entry>
 	      <entry>0x200d</entry>
 	      <entry></entry>
+	      &dash-ent-10;
 	      <entry>y<subscript>9</subscript></entry>
 	      <entry>y<subscript>8</subscript></entry>
 	      <entry>y<subscript>7</subscript></entry>
@@ -2444,6 +2312,7 @@
 	      <entry></entry>
 	      <entry></entry>
 	      <entry></entry>
+	      &dash-ent-10;
 	      <entry>y<subscript>9</subscript></entry>
 	      <entry>y<subscript>8</subscript></entry>
 	      <entry>y<subscript>7</subscript></entry>
@@ -2469,6 +2338,7 @@
 	      <entry>V4L2_MBUS_FMT_YVYU10_1X20</entry>
 	      <entry>0x200e</entry>
 	      <entry></entry>
+	      &dash-ent-10;
 	      <entry>y<subscript>9</subscript></entry>
 	      <entry>y<subscript>8</subscript></entry>
 	      <entry>y<subscript>7</subscript></entry>
@@ -2494,6 +2364,32 @@
 	      <entry></entry>
 	      <entry></entry>
 	      <entry></entry>
+	      &dash-ent-10;
+	      <entry>y<subscript>9</subscript></entry>
+	      <entry>y<subscript>8</subscript></entry>
+	      <entry>y<subscript>7</subscript></entry>
+	      <entry>y<subscript>6</subscript></entry>
+	      <entry>y<subscript>5</subscript></entry>
+	      <entry>y<subscript>4</subscript></entry>
+	      <entry>y<subscript>3</subscript></entry>
+	      <entry>y<subscript>2</subscript></entry>
+	      <entry>y<subscript>1</subscript></entry>
+	      <entry>y<subscript>0</subscript></entry>
+	      <entry>u<subscript>9</subscript></entry>
+	      <entry>u<subscript>8</subscript></entry>
+	      <entry>u<subscript>7</subscript></entry>
+	      <entry>u<subscript>6</subscript></entry>
+	      <entry>u<subscript>5</subscript></entry>
+	      <entry>u<subscript>4</subscript></entry>
+	      <entry>u<subscript>3</subscript></entry>
+	      <entry>u<subscript>2</subscript></entry>
+	      <entry>u<subscript>1</subscript></entry>
+	      <entry>u<subscript>0</subscript></entry>
+	    </row>
+	    <row id="V4L2-MBUS-FMT-YUV10-1X30">
+	      <entry>V4L2_MBUS_FMT_YUV10_1X30</entry>
+	      <entry>0x2014</entry>
+	      <entry></entry>
 	      <entry>y<subscript>9</subscript></entry>
 	      <entry>y<subscript>8</subscript></entry>
 	      <entry>y<subscript>7</subscript></entry>
@@ -2514,6 +2410,16 @@
 	      <entry>u<subscript>2</subscript></entry>
 	      <entry>u<subscript>1</subscript></entry>
 	      <entry>u<subscript>0</subscript></entry>
+	      <entry>v<subscript>9</subscript></entry>
+	      <entry>v<subscript>8</subscript></entry>
+	      <entry>v<subscript>7</subscript></entry>
+	      <entry>v<subscript>6</subscript></entry>
+	      <entry>v<subscript>5</subscript></entry>
+	      <entry>v<subscript>4</subscript></entry>
+	      <entry>v<subscript>3</subscript></entry>
+	      <entry>v<subscript>2</subscript></entry>
+	      <entry>v<subscript>1</subscript></entry>
+	      <entry>v<subscript>0</subscript></entry>
 	    </row>
 	  </tbody>
 	</tgroup>

Documentation/DocBook/media/v4l/v4l2.xml

@@ -139,6 +139,16 @@ structs, ioctls) must be noted in more detail in the history chapter
 (compat.xml), along with the possible impact on existing drivers and
 applications. -->
 
+      <revision>
+	<revnumber>3.9</revnumber>
+	<date>2012-12-03</date>
+	<authorinitials>sa, sn</authorinitials>
+	<revremark>Added timestamp types to v4l2_buffer.
+	Added <constant>V4L2_EVENT_CTRL_CH_RANGE</constant> control
+	event changes flag, see <xref linkend="changes-flags"/>.
+	</revremark>
+      </revision>
+
       <revision>
 	<revnumber>3.6</revnumber>
 	<date>2012-07-02</date>
@@ -472,7 +482,7 @@ and discussions on the V4L mailing list.</revremark>
 </partinfo>
 
 <title>Video for Linux Two API Specification</title>
- <subtitle>Revision 3.6</subtitle>
+ <subtitle>Revision 3.9</subtitle>
 
   <chapter id="common">
     &sub-common;
@@ -543,6 +553,7 @@ and discussions on the V4L mailing list.</revremark>
     &sub-enuminput;
     &sub-enumoutput;
     &sub-enumstd;
+    &sub-expbuf;
     &sub-g-audio;
     &sub-g-audioout;
     &sub-g-crop;

Documentation/DocBook/media/v4l/vidioc-create-bufs.xml

@@ -6,7 +6,8 @@
 
   <refnamediv>
     <refname>VIDIOC_CREATE_BUFS</refname>
-    <refpurpose>Create buffers for Memory Mapped or User Pointer I/O</refpurpose>
+    <refpurpose>Create buffers for Memory Mapped or User Pointer or DMA Buffer
+    I/O</refpurpose>
   </refnamediv>
 
   <refsynopsisdiv>
@@ -55,11 +56,11 @@
     </note>
 
     <para>This ioctl is used to create buffers for <link linkend="mmap">memory
-mapped</link> or <link linkend="userp">user pointer</link>
-I/O. It can be used as an alternative or in addition to the
-<constant>VIDIOC_REQBUFS</constant> ioctl, when a tighter control over buffers
-is required. This ioctl can be called multiple times to create buffers of
-different sizes.</para>
+mapped</link> or <link linkend="userp">user pointer</link> or <link
+linkend="dmabuf">DMA buffer</link> I/O. It can be used as an alternative or in
+addition to the <constant>VIDIOC_REQBUFS</constant> ioctl, when a tighter
+control over buffers is required. This ioctl can be called multiple times to
+create buffers of different sizes.</para>
 
     <para>To allocate device buffers applications initialize relevant fields of
 the <structname>v4l2_create_buffers</structname> structure. They set the
@@ -109,7 +110,8 @@ information.</para>
 	    <entry>__u32</entry>
 	    <entry><structfield>memory</structfield></entry>
 	    <entry>Applications set this field to
-<constant>V4L2_MEMORY_MMAP</constant> or
+<constant>V4L2_MEMORY_MMAP</constant>,
+<constant>V4L2_MEMORY_DMABUF</constant> or
 <constant>V4L2_MEMORY_USERPTR</constant>. See <xref linkend="v4l2-memory"
 /></entry>
 	  </row>

Documentation/DocBook/media/v4l/vidioc-dqevent.xml

@@ -261,6 +261,12 @@
 	    <entry>This control event was triggered because the control flags
 		changed.</entry>
 	  </row>
+	  <row>
+	    <entry><constant>V4L2_EVENT_CTRL_CH_RANGE</constant></entry>
+	    <entry>0x0004</entry>
+	    <entry>This control event was triggered because the minimum,
+	    maximum, step or the default value of the control changed.</entry>
+	  </row>
 	</tbody>
       </tgroup>
     </table>

Documentation/DocBook/media/v4l/vidioc-expbuf.xml

@@ -0,0 +1,208 @@
+<refentry id="vidioc-expbuf">
+
+  <refmeta>
+    <refentrytitle>ioctl VIDIOC_EXPBUF</refentrytitle>
+    &manvol;
+  </refmeta>
+
+  <refnamediv>
+    <refname>VIDIOC_EXPBUF</refname>
+    <refpurpose>Export a buffer as a DMABUF file descriptor.</refpurpose>
+  </refnamediv>
+
+  <refsynopsisdiv>
+    <funcsynopsis>
+      <funcprototype>
+	<funcdef>int <function>ioctl</function></funcdef>
+	<paramdef>int <parameter>fd</parameter></paramdef>
+	<paramdef>int <parameter>request</parameter></paramdef>
+	<paramdef>struct v4l2_exportbuffer *<parameter>argp</parameter></paramdef>
+      </funcprototype>
+    </funcsynopsis>
+  </refsynopsisdiv>
+
+  <refsect1>
+    <title>Arguments</title>
+
+    <variablelist>
+      <varlistentry>
+	<term><parameter>fd</parameter></term>
+	<listitem>
+	  <para>&fd;</para>
+	</listitem>
+      </varlistentry>
+      <varlistentry>
+	<term><parameter>request</parameter></term>
+	<listitem>
+	  <para>VIDIOC_EXPBUF</para>
+	</listitem>
+      </varlistentry>
+      <varlistentry>
+	<term><parameter>argp</parameter></term>
+	<listitem>
+	  <para></para>
+	</listitem>
+      </varlistentry>
+    </variablelist>
+  </refsect1>
+
+  <refsect1>
+    <title>Description</title>
+
+    <note>
+      <title>Experimental</title>
+      <para>This is an <link linkend="experimental"> experimental </link>
+      interface and may change in the future.</para>
+    </note>
+
+<para>This ioctl is an extension to the <link linkend="mmap">memory
+mapping</link> I/O method, therefore it is available only for
+<constant>V4L2_MEMORY_MMAP</constant> buffers.  It can be used to export a
+buffer as a DMABUF file at any time after buffers have been allocated with the
+&VIDIOC-REQBUFS; ioctl.</para>
+
+<para> To export a buffer, applications fill &v4l2-exportbuffer;.  The
+<structfield> type </structfield> field is set to the same buffer type as was
+previously used with  &v4l2-requestbuffers;<structfield> type </structfield>.
+Applications must also set the <structfield> index </structfield> field. Valid
+index numbers range from zero to the number of buffers allocated with
+&VIDIOC-REQBUFS; (&v4l2-requestbuffers;<structfield> count </structfield>)
+minus one.  For the multi-planar API, applications set the <structfield> plane
+</structfield> field to the index of the plane to be exported. Valid planes
+range from zero to the maximal number of valid planes for the currently active
+format. For the single-planar API, applications must set <structfield> plane
+</structfield> to zero.  Additional flags may be posted in the <structfield>
+flags </structfield> field.  Refer to a manual for open() for details.
+Currently only O_CLOEXEC is supported.  All other fields must be set to zero.
+In the case of multi-planar API, every plane is exported separately using
+multiple <constant> VIDIOC_EXPBUF </constant> calls. </para>
+
+<para> After calling <constant>VIDIOC_EXPBUF</constant> the <structfield> fd
+</structfield> field will be set by a driver.  This is a DMABUF file
+descriptor. The application may pass it to other DMABUF-aware devices. Refer to
+<link linkend="dmabuf">DMABUF importing</link> for details about importing
+DMABUF files into V4L2 nodes. It is recommended to close a DMABUF file when it
+is no longer used to allow the associated memory to be reclaimed. </para>
+  </refsect1>
+
+  <refsect1>
+    <title>Examples</title>
+
+    <example>
+      <title>Exporting a buffer.</title>
+      <programlisting>
+int buffer_export(int v4lfd, &v4l2-buf-type; bt, int index, int *dmafd)
+{
+	&v4l2-exportbuffer; expbuf;
+
+	memset(&amp;expbuf, 0, sizeof(expbuf));
+	expbuf.type = bt;
+	expbuf.index = index;
+	if (ioctl(v4lfd, &VIDIOC-EXPBUF;, &amp;expbuf) == -1) {
+		perror("VIDIOC_EXPBUF");
+		return -1;
+	}
+
+	*dmafd = expbuf.fd;
+
+	return 0;
+}
+      </programlisting>
+    </example>
+
+    <example>
+      <title>Exporting a buffer using the multi-planar API.</title>
+      <programlisting>
+int buffer_export_mp(int v4lfd, &v4l2-buf-type; bt, int index,
+	int dmafd[], int n_planes)
+{
+	int i;
+
+	for (i = 0; i &lt; n_planes; ++i) {
+		&v4l2-exportbuffer; expbuf;
+
+		memset(&amp;expbuf, 0, sizeof(expbuf));
+		expbuf.type = bt;
+		expbuf.index = index;
+		expbuf.plane = i;
+		if (ioctl(v4lfd, &VIDIOC-EXPBUF;, &amp;expbuf) == -1) {
+			perror("VIDIOC_EXPBUF");
+			while (i)
+				close(dmafd[--i]);
+			return -1;
+		}
+		dmafd[i] = expbuf.fd;
+	}
+
+	return 0;
+}
+      </programlisting>
+    </example>
+
+    <table pgwide="1" frame="none" id="v4l2-exportbuffer">
+      <title>struct <structname>v4l2_exportbuffer</structname></title>
+      <tgroup cols="3">
+	&cs-str;
+	<tbody valign="top">
+	  <row>
+	    <entry>__u32</entry>
+	    <entry><structfield>type</structfield></entry>
+	    <entry>Type of the buffer, same as &v4l2-format;
+<structfield>type</structfield> or &v4l2-requestbuffers;
+<structfield>type</structfield>, set by the application. See <xref
+linkend="v4l2-buf-type" /></entry>
+	  </row>
+	  <row>
+	    <entry>__u32</entry>
+	    <entry><structfield>index</structfield></entry>
+	    <entry>Number of the buffer, set by the application. This field is
+only used for <link linkend="mmap">memory mapping</link> I/O and can range from
+zero to the number of buffers allocated with the &VIDIOC-REQBUFS; and/or
+&VIDIOC-CREATE-BUFS; ioctls. </entry>
+	  </row>
+	  <row>
+	    <entry>__u32</entry>
+	    <entry><structfield>plane</structfield></entry>
+	    <entry>Index of the plane to be exported when using the
+multi-planar API. Otherwise this value must be set to zero. </entry>
+	  </row>
+	  <row>
+	    <entry>__u32</entry>
+	    <entry><structfield>flags</structfield></entry>
+	    <entry>Flags for the newly created file, currently only <constant>
+O_CLOEXEC </constant> is supported, refer to the manual of open() for more
+details.</entry>
+	  </row>
+	  <row>
+	    <entry>__s32</entry>
+	    <entry><structfield>fd</structfield></entry>
+	    <entry>The DMABUF file descriptor associated with a buffer. Set by
+		the driver.</entry>
+	  </row>
+	  <row>
+	    <entry>__u32</entry>
+	    <entry><structfield>reserved[11]</structfield></entry>
+	    <entry>Reserved field for future use. Must be set to zero.</entry>
+	  </row>
+	</tbody>
+      </tgroup>
+    </table>
+
+  </refsect1>
+
+  <refsect1>
+    &return-value;
+    <variablelist>
+      <varlistentry>
+	<term><errorcode>EINVAL</errorcode></term>
+	<listitem>
+	  <para>A queue is not in MMAP mode or DMABUF exporting is not
+supported or <structfield> flags </structfield> or <structfield> type
+</structfield> or <structfield> index </structfield> or <structfield> plane
+</structfield> fields are invalid.</para>
+	</listitem>
+      </varlistentry>
+    </variablelist>
+  </refsect1>
+
+</refentry>

Documentation/DocBook/media/v4l/vidioc-g-ctrl.xml

@@ -64,7 +64,9 @@ return an &EINVAL;. When the <structfield>value</structfield> is out
 of bounds drivers can choose to take the closest valid value or return
 an &ERANGE;, whatever seems more appropriate. However,
 <constant>VIDIOC_S_CTRL</constant> is a write-only ioctl, it does not
-return the actual new value.</para>
+return the actual new value. If the <structfield>value</structfield>
+is inappropriate for the control (e.g. if it refers to an unsupported
+menu index of a menu control), then &EINVAL; is returned as well.</para>
 
     <para>These ioctls work only with user controls. For other
 control classes the &VIDIOC-G-EXT-CTRLS;, &VIDIOC-S-EXT-CTRLS; or
@@ -99,7 +101,9 @@ application.</entry>
 	<term><errorcode>EINVAL</errorcode></term>
 	<listitem>
 	  <para>The &v4l2-control; <structfield>id</structfield> is
-invalid.</para>
+invalid or the <structfield>value</structfield> is inappropriate for
+the given control (i.e. if a menu item is selected that is not supported
+by the driver according to &VIDIOC-QUERYMENU;).</para>
 	</listitem>
       </varlistentry>
       <varlistentry>

Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml

@@ -106,7 +106,9 @@ value or if an error is returned.</para>
 &EINVAL;. When the value is out of bounds drivers can choose to take
 the closest valid value or return an &ERANGE;, whatever seems more
 appropriate. In the first case the new value is set in
-&v4l2-ext-control;.</para>
+&v4l2-ext-control;. If the new control value is inappropriate (e.g. the
+given menu index is not supported by the menu control), then this will
+also result in an &EINVAL; error.</para>
 
     <para>The driver will only set/get these controls if all control
 values are correct. This prevents the situation where only some of the
@@ -199,13 +201,46 @@ also be zero.</entry>
 	  <row>
 	    <entry>__u32</entry>
 	    <entry><structfield>error_idx</structfield></entry>
-	    <entry>Set by the driver in case of an error. If it is equal
-to <structfield>count</structfield>, then no actual changes were made to
-controls. In other words, the error was not associated with setting a particular
-control. If it is another value, then only the controls up to <structfield>error_idx-1</structfield>
-were modified and control <structfield>error_idx</structfield> is the one that
-caused the error. The <structfield>error_idx</structfield> value is undefined
-if the ioctl returned 0 (success).</entry>
+	    <entry><para>Set by the driver in case of an error. If the error is
+associated with a particular control, then <structfield>error_idx</structfield>
+is set to the index of that control. If the error is not related to a specific
+control, or the validation step failed (see below), then
+<structfield>error_idx</structfield> is set to <structfield>count</structfield>.
+The value is undefined if the ioctl returned 0 (success).</para>
+
+<para>Before controls are read from/written to hardware a validation step
+takes place: this checks if all controls in the list are valid controls,
+if no attempt is made to write to a read-only control or read from a write-only
+control, and any other up-front checks that can be done without accessing the
+hardware. The exact validations done during this step are driver dependent
+since some checks might require hardware access for some devices, thus making
+it impossible to do those checks up-front. However, drivers should make a
+best-effort to do as many up-front checks as possible.</para>
+
+<para>This check is done to avoid leaving the hardware in an inconsistent state due
+to easy-to-avoid problems. But it leads to another problem: the application needs to
+know whether an error came from the validation step (meaning that the hardware
+was not touched) or from an error during the actual reading from/writing to hardware.</para>
+
+<para>The, in hindsight quite poor, solution for that is to set <structfield>error_idx</structfield>
+to <structfield>count</structfield> if the validation failed. This has the
+unfortunate side-effect that it is not possible to see which control failed the
+validation. If the validation was successful and the error happened while
+accessing the hardware, then <structfield>error_idx</structfield> is less than
+<structfield>count</structfield> and only the controls up to
+<structfield>error_idx-1</structfield> were read or written correctly, and the
+state of the remaining controls is undefined.</para>
+
+<para>Since <constant>VIDIOC_TRY_EXT_CTRLS</constant> does not access hardware
+there is also no need to handle the validation step in this special way,
+so <structfield>error_idx</structfield> will just be set to the control that
+failed the validation step instead of to <structfield>count</structfield>.
+This means that if <constant>VIDIOC_S_EXT_CTRLS</constant> fails with
+<structfield>error_idx</structfield> set to <structfield>count</structfield>,
+then you can call <constant>VIDIOC_TRY_EXT_CTRLS</constant> to try to discover
+the actual control that failed the validation step. Unfortunately, there
+is no <constant>TRY</constant> equivalent for <constant>VIDIOC_G_EXT_CTRLS</constant>.
+</para></entry>
 	  </row>
 	  <row>
 	    <entry>__u32</entry>
@@ -298,8 +333,10 @@ These controls are described in <xref
 	<term><errorcode>EINVAL</errorcode></term>
 	<listitem>
 	  <para>The &v4l2-ext-control; <structfield>id</structfield>
-is invalid or the &v4l2-ext-controls;
-<structfield>ctrl_class</structfield> is invalid. This error code is
+is invalid, the &v4l2-ext-controls;
+<structfield>ctrl_class</structfield> is invalid, or the &v4l2-ext-control;
+<structfield>value</structfield> was inappropriate (e.g. the given menu
+index is not supported by the driver). This error code is
 also returned by the <constant>VIDIOC_S_EXT_CTRLS</constant> and
 <constant>VIDIOC_TRY_EXT_CTRLS</constant> ioctls if two or more
 control values are in conflict.</para>

Documentation/DocBook/media/v4l/vidioc-qbuf.xml

@@ -109,6 +109,23 @@ they cannot be swapped out to disk. Buffers remain locked until
 dequeued, until the &VIDIOC-STREAMOFF; or &VIDIOC-REQBUFS; ioctl is
 called, or until the device is closed.</para>
 
+    <para>To enqueue a <link linkend="dmabuf">DMABUF</link> buffer applications
+set the <structfield>memory</structfield> field to
+<constant>V4L2_MEMORY_DMABUF</constant> and the <structfield>m.fd</structfield>
+field to a file descriptor associated with a DMABUF buffer. When the
+multi-planar API is used the <structfield>m.fd</structfield> fields of the
+passed array of &v4l2-plane; have to be used instead. When
+<constant>VIDIOC_QBUF</constant> is called with a pointer to this structure the
+driver sets the <constant>V4L2_BUF_FLAG_QUEUED</constant> flag and clears the
+<constant>V4L2_BUF_FLAG_MAPPED</constant> and
+<constant>V4L2_BUF_FLAG_DONE</constant> flags in the
+<structfield>flags</structfield> field, or it returns an error code.  This
+ioctl locks the buffer. Locking a buffer means passing it to a driver for a
+hardware access (usually DMA).  If an application accesses (reads/writes) a
+locked buffer then the result is undefined.  Buffers remain locked until
+dequeued, until the &VIDIOC-STREAMOFF; or &VIDIOC-REQBUFS; ioctl is called, or
+until the device is closed.</para>
+
     <para>Applications call the <constant>VIDIOC_DQBUF</constant>
 ioctl to dequeue a filled (capturing) or displayed (output) buffer
 from the driver's outgoing queue. They just set the

Documentation/DocBook/media/v4l/vidioc-querycap.xml

@@ -76,7 +76,7 @@ make sure the strings are properly NUL-terminated.</para></entry>
 	  <row>
 	    <entry>__u8</entry>
 	    <entry><structfield>card</structfield>[32]</entry>
-	    <entry>Name of the device, a NUL-terminated ASCII string.
+	    <entry>Name of the device, a NUL-terminated UTF-8 string.
 For example: "Yoyodyne TV/FM". One driver may support different brands
 or models of video hardware. This information is intended for users,
 for example in a menu of available devices. Since multiple TV cards of

Documentation/DocBook/media/v4l/vidioc-reqbufs.xml

@@ -48,28 +48,30 @@
   <refsect1>
     <title>Description</title>
 
-    <para>This ioctl is used to initiate <link linkend="mmap">memory
-mapped</link> or <link linkend="userp">user pointer</link>
-I/O. Memory mapped buffers are located in device memory and must be
-allocated with this ioctl before they can be mapped into the
-application's address space. User buffers are allocated by
-applications themselves, and this ioctl is merely used to switch the
-driver into user pointer I/O mode and to setup some internal structures.</para>
+<para>This ioctl is used to initiate <link linkend="mmap">memory mapped</link>,
+<link linkend="userp">user pointer</link> or <link
+linkend="dmabuf">DMABUF</link> based I/O.  Memory mapped buffers are located in
+device memory and must be allocated with this ioctl before they can be mapped
+into the application's address space. User buffers are allocated by
+applications themselves, and this ioctl is merely used to switch the driver
+into user pointer I/O mode and to setup some internal structures.
+Similarly, DMABUF buffers are allocated by applications through a device
+driver, and this ioctl only configures the driver into DMABUF I/O mode without
+performing any direct allocation.</para>
 
-    <para>To allocate device buffers applications initialize all
-fields of the <structname>v4l2_requestbuffers</structname> structure.
-They set the <structfield>type</structfield> field to the respective
-stream or buffer type, the <structfield>count</structfield> field to
-the desired number of buffers, <structfield>memory</structfield>
-must be set to the requested I/O method and the <structfield>reserved</structfield> array
-must be zeroed. When the ioctl
-is called with a pointer to this structure the driver will attempt to allocate
-the requested number of buffers and it stores the actual number
-allocated in the <structfield>count</structfield> field. It can be
-smaller than the number requested, even zero, when the driver runs out
-of free memory. A larger number is also possible when the driver requires
-more buffers to function correctly. For example video output requires at least two buffers,
-one displayed and one filled by the application.</para>
+    <para>To allocate device buffers applications initialize all fields of the
+<structname>v4l2_requestbuffers</structname> structure.  They set the
+<structfield>type</structfield> field to the respective stream or buffer type,
+the <structfield>count</structfield> field to the desired number of buffers,
+<structfield>memory</structfield> must be set to the requested I/O method and
+the <structfield>reserved</structfield> array must be zeroed. When the ioctl is
+called with a pointer to this structure the driver will attempt to allocate the
+requested number of buffers and it stores the actual number allocated in the
+<structfield>count</structfield> field. It can be smaller than the number
+requested, even zero, when the driver runs out of free memory. A larger number
+is also possible when the driver requires more buffers to function correctly.
+For example video output requires at least two buffers, one displayed and one
+filled by the application.</para>
     <para>When the I/O method is not supported the ioctl
 returns an &EINVAL;.</para>
 
@@ -102,7 +104,8 @@ as the &v4l2-format; <structfield>type</structfield> field. See <xref
 	    <entry>__u32</entry>
 	    <entry><structfield>memory</structfield></entry>
 	    <entry>Applications set this field to
-<constant>V4L2_MEMORY_MMAP</constant> or
+<constant>V4L2_MEMORY_MMAP</constant>,
+<constant>V4L2_MEMORY_DMABUF</constant> or
 <constant>V4L2_MEMORY_USERPTR</constant>. See <xref linkend="v4l2-memory"
 />.</entry>
 	  </row>

Documentation/DocBook/media_api.tmpl

@@ -22,6 +22,7 @@
 
 <!-- LinuxTV v4l-dvb repository. -->
 <!ENTITY v4l-dvb		"<ulink url='http://linuxtv.org/repo/'>http://linuxtv.org/repo/</ulink>">
+<!ENTITY dash-ent-10            "<entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry>">
 ]>
 
 <book id="media_api">

Documentation/DocBook/uio-howto.tmpl

@@ -984,7 +984,7 @@ int main()
 		return errno;
 	}
 	configfd = open("/sys/class/uio/uio0/device/config", O_RDWR);
-	if (uiofd < 0) {
+	if (configfd < 0) {
 		perror("config open:");
 		return errno;
 	}

Documentation/DocBook/writing-an-alsa-driver.tmpl

@@ -871,9 +871,8 @@
       <para>
       This function itself doesn't allocate the data space. The data
       must be allocated manually beforehand, and its pointer is passed
-      as the argument. This pointer is used as the
-      (<parameter>chip</parameter> identifier in the above example)
-      for the instance. 
+      as the argument. This pointer (<parameter>chip</parameter> in the
+      above example) is used as the identifier for the instance.
       </para>
 
       <para>
@@ -2304,7 +2303,7 @@ struct _snd_pcm_runtime {
         <constant>SNDRV_PCM_INFO_XXX</constant>. Here, at least, you
         have to specify whether the mmap is supported and which
         interleaved format is supported.
-        When the is supported, add the
+        When the hardware supports mmap, add the
         <constant>SNDRV_PCM_INFO_MMAP</constant> flag here. When the
         hardware supports the interleaved or the non-interleaved
         formats, <constant>SNDRV_PCM_INFO_INTERLEAVED</constant> or
@@ -2898,7 +2897,7 @@ struct _snd_pcm_runtime {
 
         <para>
           When the pcm supports the pause operation (given in the info
-        field of the hardware table), the <constant>PAUSE_PUSE</constant>
+        field of the hardware table), the <constant>PAUSE_PUSH</constant>
         and <constant>PAUSE_RELEASE</constant> commands must be
         handled here, too. The former is the command to pause the pcm,
         and the latter to restart the pcm again. 
@@ -3085,7 +3084,7 @@ struct _snd_pcm_runtime {
       <section id="pcm-interface-interrupt-handler-timer">
         <title>High frequency timer interrupts</title>
         <para>
-	This happense when the hardware doesn't generate interrupts
+	This happens when the hardware doesn't generate interrupts
         at the period boundary but issues timer interrupts at a fixed
         timer rate (e.g. es1968 or ymfpci drivers). 
         In this case, you need to check the current hardware
@@ -3251,18 +3250,19 @@ struct _snd_pcm_runtime {
 	  <title>Example of Hardware Constraints for Channels</title>
 	  <programlisting>
 <![CDATA[
-  static int hw_rule_format_by_channels(struct snd_pcm_hw_params *params,
+  static int hw_rule_channels_by_format(struct snd_pcm_hw_params *params,
                                         struct snd_pcm_hw_rule *rule)
   {
           struct snd_interval *c = hw_param_interval(params,
-                SNDRV_PCM_HW_PARAM_CHANNELS);
+                        SNDRV_PCM_HW_PARAM_CHANNELS);
           struct snd_mask *f = hw_param_mask(params, SNDRV_PCM_HW_PARAM_FORMAT);
-          struct snd_mask fmt;
+          struct snd_interval ch;
 
-          snd_mask_any(&fmt);    /* Init the struct */
-          if (c->min < 2) {
-                  fmt.bits[0] &= SNDRV_PCM_FMTBIT_S16_LE;
-                  return snd_mask_refine(f, &fmt);
+          snd_interval_any(&ch);
+          if (f->bits[0] == SNDRV_PCM_FMTBIT_S16_LE) {
+                  ch.min = ch.max = 1;
+                  ch.integer = 1;
+                  return snd_interval_refine(c, &ch);
           }
           return 0;
   }
@@ -3278,35 +3278,35 @@ struct _snd_pcm_runtime {
 	 <programlisting>
 <![CDATA[
   snd_pcm_hw_rule_add(substream->runtime, 0, SNDRV_PCM_HW_PARAM_CHANNELS,
-                      hw_rule_channels_by_format, 0, SNDRV_PCM_HW_PARAM_FORMAT,
-                      -1);
+                      hw_rule_channels_by_format, NULL,
+                      SNDRV_PCM_HW_PARAM_FORMAT, -1);
 ]]>
           </programlisting>
         </informalexample>
       </para>
 
       <para>
-        The rule function is called when an application sets the number of
-        channels. But an application can set the format before the number of
-        channels. Thus you also need to define the inverse rule:
+        The rule function is called when an application sets the PCM
+	format, and it refines the number of channels accordingly.
+        But an application may set the number of channels before
+	setting the format. Thus you also need to define the inverse rule:
 
        <example>
-	 <title>Example of Hardware Constraints for Channels</title>
+	 <title>Example of Hardware Constraints for Formats</title>
 	 <programlisting>
 <![CDATA[
-  static int hw_rule_channels_by_format(struct snd_pcm_hw_params *params,
+  static int hw_rule_format_by_channels(struct snd_pcm_hw_params *params,
                                         struct snd_pcm_hw_rule *rule)
   {
           struct snd_interval *c = hw_param_interval(params,
-                        SNDRV_PCM_HW_PARAM_CHANNELS);
+                SNDRV_PCM_HW_PARAM_CHANNELS);
           struct snd_mask *f = hw_param_mask(params, SNDRV_PCM_HW_PARAM_FORMAT);
-          struct snd_interval ch;
+          struct snd_mask fmt;
 
-          snd_interval_any(&ch);
-          if (f->bits[0] == SNDRV_PCM_FMTBIT_S16_LE) {
-                  ch.min = ch.max = 1;
-                  ch.integer = 1;
-                  return snd_interval_refine(c, &ch);
+          snd_mask_any(&fmt);    /* Init the struct */
+          if (c->min < 2) {
+                  fmt.bits[0] &= SNDRV_PCM_FMTBIT_S16_LE;
+                  return snd_mask_refine(f, &fmt);
           }
           return 0;
   }
@@ -3321,8 +3321,8 @@ struct _snd_pcm_runtime {
 	 <programlisting>
 <![CDATA[
   snd_pcm_hw_rule_add(substream->runtime, 0, SNDRV_PCM_HW_PARAM_FORMAT,
-                      hw_rule_format_by_channels, 0, SNDRV_PCM_HW_PARAM_CHANNELS,
-                      -1);
+                      hw_rule_format_by_channels, NULL,
+                      SNDRV_PCM_HW_PARAM_CHANNELS, -1);
 ]]>
           </programlisting>
         </informalexample>

Documentation/EDID/HOWTO.txt

@@ -28,11 +28,30 @@ Makefile environment are given here.
 To create binary EDID and C source code files from the existing data
 material, simply type "make".
 
-If you want to create your own EDID file, copy the file 1024x768.S and
-replace the settings with your own data. The CRC value in the last line
+If you want to create your own EDID file, copy the file 1024x768.S,
+replace the settings with your own data and add a new target to the
+Makefile. Please note that the EDID data structure expects the timing
+values in a different way as compared to the standard X11 format.
+
+X11:
+HTimings:  hdisp hsyncstart hsyncend htotal
+VTimings:  vdisp vsyncstart vsyncend vtotal
+
+EDID:
+#define XPIX hdisp
+#define XBLANK htotal-hdisp
+#define XOFFSET hsyncstart-hdisp
+#define XPULSE hsyncend-hsyncstart
+
+#define YPIX vdisp
+#define YBLANK vtotal-vdisp
+#define YOFFSET (63+(vsyncstart-vdisp))
+#define YPULSE (63+(vsyncend-vsyncstart))
+
+The CRC value in the last line
   #define CRC 0x55
-is a bit tricky. After a first version of the binary data set is
-created, it must be be checked with the "edid-decode" utility which will
+also is a bit tricky. After a first version of the binary data set is
+created, it must be checked with the "edid-decode" utility which will
 most probably complain about a wrong CRC. Fortunately, the utility also
 displays the correct CRC which must then be inserted into the source
 file. After the make procedure is repeated, the EDID data set is ready

Documentation/IPMI.txt

@@ -348,34 +348,40 @@ You can change this at module load time (for a module) with:
 
   modprobe ipmi_si.o type=<type1>,<type2>....
        ports=<port1>,<port2>... addrs=<addr1>,<addr2>...
-       irqs=<irq1>,<irq2>... trydefaults=[0|1]
+       irqs=<irq1>,<irq2>...
        regspacings=<sp1>,<sp2>,... regsizes=<size1>,<size2>,...
        regshifts=<shift1>,<shift2>,...
        slave_addrs=<addr1>,<addr2>,...
        force_kipmid=<enable1>,<enable2>,...
        kipmid_max_busy_us=<ustime1>,<ustime2>,...
        unload_when_empty=[0|1]
+       trydefaults=[0|1] trydmi=[0|1] tryacpi=[0|1]
+       tryplatform=[0|1] trypci=[0|1]
 
-Each of these except si_trydefaults is a list, the first item for the
+Each of these except try... items is a list, the first item for the
 first interface, second item for the second interface, etc.
 
 The si_type may be either "kcs", "smic", or "bt".  If you leave it blank, it
 defaults to "kcs".
 
-If you specify si_addrs as non-zero for an interface, the driver will
+If you specify addrs as non-zero for an interface, the driver will
 use the memory address given as the address of the device.  This
 overrides si_ports.
 
-If you specify si_ports as non-zero for an interface, the driver will
+If you specify ports as non-zero for an interface, the driver will
 use the I/O port given as the device address.
 
-If you specify si_irqs as non-zero for an interface, the driver will
+If you specify irqs as non-zero for an interface, the driver will
 attempt to use the given interrupt for the device.
 
-si_trydefaults sets whether the standard IPMI interface at 0xca2 and
+trydefaults sets whether the standard IPMI interface at 0xca2 and
 any interfaces specified by ACPE are tried.  By default, the driver
 tries it, set this value to zero to turn this off.
 
+The other try... items disable discovery by their corresponding
+names.  These are all enabled by default, set them to zero to disable
+them.  The tryplatform disables openfirmware.
+
 The next three parameters have to do with register layout.  The
 registers used by the interfaces may not appear at successive
 locations and they may not be in 8-bit registers.  These parameters

Documentation/PCI/MSI-HOWTO.txt

@@ -127,15 +127,42 @@ on the number of vectors that can be allocated; pci_enable_msi_block()
 returns as soon as it finds any constraint that doesn't allow the
 call to succeed.
 
-4.2.3 pci_disable_msi
+4.2.3 pci_enable_msi_block_auto
+
+int pci_enable_msi_block_auto(struct pci_dev *dev, unsigned int *count)
+
+This variation on pci_enable_msi() call allows a device driver to request
+the maximum possible number of MSIs.  The MSI specification only allows
+interrupts to be allocated in powers of two, up to a maximum of 2^5 (32).
+
+If this function returns a positive number, it indicates that it has
+succeeded and the returned value is the number of allocated interrupts. In
+this case, the function enables MSI on this device and updates dev->irq to
+be the lowest of the new interrupts assigned to it.  The other interrupts
+assigned to the device are in the range dev->irq to dev->irq + returned
+value - 1.
+
+If this function returns a negative number, it indicates an error and
+the driver should not attempt to request any more MSI interrupts for
+this device.
+
+If the device driver needs to know the number of interrupts the device
+supports it can pass the pointer count where that number is stored. The
+device driver must decide what action to take if pci_enable_msi_block_auto()
+succeeds, but returns a value less than the number of interrupts supported.
+If the device driver does not need to know the number of interrupts
+supported, it can set the pointer count to NULL.
+
+4.2.4 pci_disable_msi
 
 void pci_disable_msi(struct pci_dev *dev)
 
 This function should be used to undo the effect of pci_enable_msi() or
-pci_enable_msi_block().  Calling it restores dev->irq to the pin-based
-interrupt number and frees the previously allocated message signaled
-interrupt(s).  The interrupt may subsequently be assigned to another
-device, so drivers should not cache the value of dev->irq.
+pci_enable_msi_block() or pci_enable_msi_block_auto().  Calling it restores
+dev->irq to the pin-based interrupt number and frees the previously
+allocated message signaled interrupt(s).  The interrupt may subsequently be
+assigned to another device, so drivers should not cache the value of
+dev->irq.
 
 Before calling this function, a device driver must always call free_irq()
 on any interrupt for which it previously called request_irq().

Documentation/PCI/pci-iov-howto.txt

@@ -76,7 +76,7 @@ To notify SR-IOV core of Virtual Function Migration:
 
 Following piece of code illustrates the usage of the SR-IOV API.
 
-static int __devinit dev_probe(struct pci_dev *dev, const struct pci_device_id *id)
+static int dev_probe(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	pci_enable_sriov(dev, NR_VIRTFN);
 
@@ -85,7 +85,7 @@ static int __devinit dev_probe(struct pci_dev *dev, const struct pci_device_id *
 	return 0;
 }
 
-static void __devexit dev_remove(struct pci_dev *dev)
+static void dev_remove(struct pci_dev *dev)
 {
 	pci_disable_sriov(dev);
 
@@ -131,7 +131,7 @@ static struct pci_driver dev_driver = {
 	.name =		"SR-IOV Physical Function driver",
 	.id_table =	dev_id_table,
 	.probe =	dev_probe,
-	.remove =	__devexit_p(dev_remove),
+	.remove =	dev_remove,
 	.suspend =	dev_suspend,
 	.resume =	dev_resume,
 	.shutdown =	dev_shutdown,

Documentation/PCI/pci.txt

@@ -183,12 +183,6 @@ Please mark the initialization and cleanup functions where appropriate
 			initializes.
 	__exit		Exit code. Ignored for non-modular drivers.
 
-
-	__devinit	Device initialization code.
-			Identical to __init if the kernel is not compiled
-			with CONFIG_HOTPLUG, normal function otherwise.
-	__devexit	The same for __exit.
-
 Tips on when/where to use the above attributes:
 	o The module_init()/module_exit() functions (and all
 	  initialization functions called _only_ from these)
@@ -196,20 +190,6 @@ Tips on when/where to use the above attributes:
 
 	o Do not mark the struct pci_driver.
 
-	o The ID table array should be marked __devinitconst; this is done
-	  automatically if the table is declared with DEFINE_PCI_DEVICE_TABLE().
-
-	o The probe() and remove() functions should be marked __devinit
-	  and __devexit respectively.  All initialization functions
-	  exclusively called by the probe() routine, can be marked __devinit.
-	  Ditto for remove() and __devexit.
-
-	o If mydriver_remove() is marked with __devexit(), then all address
-	  references to mydriver_remove must use __devexit_p(mydriver_remove)
-	  (in the struct pci_driver declaration for example).
-	  __devexit_p() will generate the function name _or_ NULL if the
-	  function will be discarded.  For an example, see drivers/net/tg3.c.
-
 	o Do NOT mark a function if you are not sure which mark to use.
 	  Better to not mark the function than mark the function wrong.
 

Documentation/acpi/enumeration.txt

@@ -63,8 +63,8 @@ from ACPI tables.
 Currently the kernel is not able to automatically determine from which ACPI
 device it should make the corresponding platform device so we need to add
 the ACPI device explicitly to acpi_platform_device_ids list defined in
-drivers/acpi/scan.c. This limitation is only for the platform devices, SPI
-and I2C devices are created automatically as described below.
+drivers/acpi/acpi_platform.c. This limitation is only for the platform
+devices, SPI and I2C devices are created automatically as described below.
 
 SPI serial bus support
 ~~~~~~~~~~~~~~~~~~~~~~
@@ -185,7 +185,7 @@ input driver:
 			.acpi_match_table  ACPI_PTR(mpu3050_acpi_match),
 		},
 		.probe		= mpu3050_probe,
-		.remove		= __devexit_p(mpu3050_remove),
+		.remove		= mpu3050_remove,
 		.id_table	= mpu3050_ids,
 	};
 

Documentation/acpi/initrd_table_override.txt

@@ -0,0 +1,94 @@
+Overriding ACPI tables via initrd
+=================================
+
+1) Introduction (What is this about)
+2) What is this for
+3) How does it work
+4) References (Where to retrieve userspace tools)
+
+1) What is this about
+---------------------
+
+If the ACPI_INITRD_TABLE_OVERRIDE compile option is true, it is possible to
+override nearly any ACPI table provided by the BIOS with an instrumented,
+modified one.
+
+For a full list of ACPI tables that can be overridden, take a look at
+the char *table_sigs[MAX_ACPI_SIGNATURE]; definition in drivers/acpi/osl.c
+All ACPI tables iasl (Intel's ACPI compiler and disassembler) knows should
+be overridable, except:
+   - ACPI_SIG_RSDP (has a signature of 6 bytes)
+   - ACPI_SIG_FACS (does not have an ordinary ACPI table header)
+Both could get implemented as well.
+
+
+2) What is this for
+-------------------
+
+Please keep in mind that this is a debug option.
+ACPI tables should not get overridden for productive use.
+If BIOS ACPI tables are overridden the kernel will get tainted with the
+TAINT_OVERRIDDEN_ACPI_TABLE flag.
+Complain to your platform/BIOS vendor if you find a bug which is so sever
+that a workaround is not accepted in the Linux kernel.
+
+Still, it can and should be enabled in any kernel, because:
+  - There is no functional change with not instrumented initrds
+  - It provides a powerful feature to easily debug and test ACPI BIOS table
+    compatibility with the Linux kernel.
+
+
+3) How does it work
+-------------------
+
+# Extract the machine's ACPI tables:
+cd /tmp
+acpidump >acpidump
+acpixtract -a acpidump
+# Disassemble, modify and recompile them:
+iasl -d *.dat
+# For example add this statement into a _PRT (PCI Routing Table) function
+# of the DSDT:
+Store("HELLO WORLD", debug)
+iasl -sa dsdt.dsl
+# Add the raw ACPI tables to an uncompressed cpio archive.
+# They must be put into a /kernel/firmware/acpi directory inside the
+# cpio archive.
+# The uncompressed cpio archive must be the first.
+# Other, typically compressed cpio archives, must be
+# concatenated on top of the uncompressed one.
+mkdir -p kernel/firmware/acpi
+cp dsdt.aml kernel/firmware/acpi
+# A maximum of: #define ACPI_OVERRIDE_TABLES 10
+# tables are  currently allowed (see osl.c):
+iasl -sa facp.dsl
+iasl -sa ssdt1.dsl
+cp facp.aml kernel/firmware/acpi
+cp ssdt1.aml kernel/firmware/acpi
+# Create the uncompressed cpio archive and concatenate the original initrd
+# on top:
+find kernel | cpio -H newc --create > /boot/instrumented_initrd
+cat /boot/initrd >>/boot/instrumented_initrd
+# reboot with increased acpi debug level, e.g. boot params:
+acpi.debug_level=0x2 acpi.debug_layer=0xFFFFFFFF
+# and check your syslog:
+[    1.268089] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
+[    1.272091] [ACPI Debug]  String [0x0B] "HELLO WORLD"
+
+iasl is able to disassemble and recompile quite a lot different,
+also static ACPI tables.
+
+
+4) Where to retrieve userspace tools
+------------------------------------
+
+iasl and acpixtract are part of Intel's ACPICA project:
+http://acpica.org/
+and should be packaged by distributions (for example in the acpica package
+on SUSE).
+
+acpidump can be found in Len Browns pmtools:
+ftp://kernel.org/pub/linux/kernel/people/lenb/acpi/utils/pmtools/acpidump
+This tool is also part of the acpica package on SUSE.
+Alternatively, used ACPI tables can be retrieved via sysfs in latest kernels:
+/sys/firmware/acpi/tables

Documentation/acpi/scan_handlers.txt

@@ -0,0 +1,77 @@
+ACPI Scan Handlers
+
+Copyright (C) 2012, Intel Corporation
+Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+
+During system initialization and ACPI-based device hot-add, the ACPI namespace
+is scanned in search of device objects that generally represent various pieces
+of hardware.  This causes a struct acpi_device object to be created and
+registered with the driver core for every device object in the ACPI namespace
+and the hierarchy of those struct acpi_device objects reflects the namespace
+layout (i.e. parent device objects in the namespace are represented by parent
+struct acpi_device objects and analogously for their children).  Those struct
+acpi_device objects are referred to as "device nodes" in what follows, but they
+should not be confused with struct device_node objects used by the Device Trees
+parsing code (although their role is analogous to the role of those objects).
+
+During ACPI-based device hot-remove device nodes representing pieces of hardware
+being removed are unregistered and deleted.
+
+The core ACPI namespace scanning code in drivers/acpi/scan.c carries out basic
+initialization of device nodes, such as retrieving common configuration
+information from the device objects represented by them and populating them with
+appropriate data, but some of them require additional handling after they have
+been registered.  For example, if the given device node represents a PCI host
+bridge, its registration should cause the PCI bus under that bridge to be
+enumerated and PCI devices on that bus to be registered with the driver core.
+Similarly, if the device node represents a PCI interrupt link, it is necessary
+to configure that link so that the kernel can use it.
+
+Those additional configuration tasks usually depend on the type of the hardware
+component represented by the given device node which can be determined on the
+basis of the device node's hardware ID (HID).  They are performed by objects
+called ACPI scan handlers represented by the following structure:
+
+struct acpi_scan_handler {
+	const struct acpi_device_id *ids;
+	struct list_head list_node;
+	int (*attach)(struct acpi_device *dev, const struct acpi_device_id *id);
+	void (*detach)(struct acpi_device *dev);
+};
+
+where ids is the list of IDs of device nodes the given handler is supposed to
+take care of, list_node is the hook to the global list of ACPI scan handlers
+maintained by the ACPI core and the .attach() and .detach() callbacks are
+executed, respectively, after registration of new device nodes and before
+unregistration of device nodes the handler attached to previously.
+
+The namespace scanning function, acpi_bus_scan(), first registers all of the
+device nodes in the given namespace scope with the driver core.  Then, it tries
+to match a scan handler against each of them using the ids arrays of the
+available scan handlers.  If a matching scan handler is found, its .attach()
+callback is executed for the given device node.  If that callback returns 1,
+that means that the handler has claimed the device node and is now responsible
+for carrying out any additional configuration tasks related to it.  It also will
+be responsible for preparing the device node for unregistration in that case.
+The device node's handler field is then populated with the address of the scan
+handler that has claimed it.
+
+If the .attach() callback returns 0, it means that the device node is not
+interesting to the given scan handler and may be matched against the next scan
+handler in the list.  If it returns a (negative) error code, that means that
+the namespace scan should be terminated due to a serious error.  The error code
+returned should then reflect the type of the error.
+
+The namespace trimming function, acpi_bus_trim(), first executes .detach()
+callbacks from the scan handlers of all device nodes in the given namespace
+scope (if they have scan handlers).  Next, it unregisters all of the device
+nodes in that scope.
+
+ACPI scan handlers can be added to the list maintained by the ACPI core with the
+help of the acpi_scan_add_handler() function taking a pointer to the new scan
+handler as an argument.  The order in which scan handlers are added to the list
+is the order in which they are matched against device nodes during namespace
+scans.
+
+All scan handles must be added to the list before acpi_bus_scan() is run for the
+first time and they cannot be removed from it.

Documentation/aoe/aoe.txt

@@ -125,7 +125,9 @@ DRIVER OPTIONS
   The aoe_deadsecs module parameter determines the maximum number of
   seconds that the driver will wait for an AoE device to provide a
   response to an AoE command.  After aoe_deadsecs seconds have
-  elapsed, the AoE device will be marked as "down".
+  elapsed, the AoE device will be marked as "down".  A value of zero
+  is supported for testing purposes and makes the aoe driver keep
+  trying AoE commands forever.
 
   The aoe_maxout module parameter has a default of 128.  This is the
   maximum number of unresponded packets that will be sent to an AoE

Documentation/arm/OMAP/DSS

@@ -285,7 +285,10 @@ FB0 +-- GFX  ---- LCD ---- LCD
 Misc notes
 ----------
 
-OMAP FB allocates the framebuffer memory using the OMAP VRAM allocator.
+OMAP FB allocates the framebuffer memory using the standard dma allocator. You
+can enable Contiguous Memory Allocator (CONFIG_CMA) to improve the dma
+allocator, and if CMA is enabled, you use "cma=" kernel parameter to increase
+the global memory area for CMA.
 
 Using DSI DPLL to generate pixel clock it is possible produce the pixel clock
 of 86.5MHz (max possible), and with that you get 1280x1024@57 output from DVI.
@@ -301,11 +304,6 @@ framebuffer parameters.
 Kernel boot arguments
 ---------------------
 
-vram=<size>[,<physaddr>]
-	- Amount of total VRAM to preallocate and optionally a physical start
-	  memory address. For example, "10M". omapfb allocates memory for
-	  framebuffers from VRAM.
-
 omapfb.mode=<display>:<mode>[,...]
 	- Default video mode for specified displays. For example,
 	  "dvi:800x400MR-24@60".  See drivers/video/modedb.c.

Documentation/arm64/memory.txt

@@ -35,6 +35,8 @@ ffffffbc00000000	ffffffbdffffffff	   8GB		vmemmap
 
 ffffffbe00000000	ffffffbffbbfffff	  ~8GB		[guard, future vmmemap]
 
+ffffffbffbc00000	ffffffbffbdfffff	   2MB		earlyprintk device
+
 ffffffbffbe00000	ffffffbffbe0ffff	  64KB		PCI I/O space
 
 ffffffbbffff0000	ffffffbcffffffff	  ~2MB		[guard]

Documentation/atomic_ops.txt

@@ -253,6 +253,8 @@ This performs an atomic exchange operation on the atomic variable v, setting
 the given new value.  It returns the old value that the atomic variable v had
 just before the operation.
 
+atomic_xchg requires explicit memory barriers around the operation.
+
 	int atomic_cmpxchg(atomic_t *v, int old, int new);
 
 This performs an atomic compare exchange operation on the atomic value v,

Documentation/backlight/lp855x-driver.txt

@@ -4,7 +4,7 @@ Kernel driver lp855x
 Backlight driver for LP855x ICs
 
 Supported chips:
-	Texas Instruments LP8550, LP8551, LP8552, LP8553 and LP8556
+	Texas Instruments LP8550, LP8551, LP8552, LP8553, LP8556 and LP8557
 
 Author: Milo(Woogyom) Kim <milo.kim@ti.com>
 
@@ -24,7 +24,7 @@ Value : pwm based or register based
 
 2) chip_id
 The lp855x chip id.
-Value : lp8550/lp8551/lp8552/lp8553/lp8556
+Value : lp8550/lp8551/lp8552/lp8553/lp8556/lp8557
 
 Platform data for lp855x
 ------------------------
@@ -35,11 +35,8 @@ For supporting platform specific data, the lp855x platform data can be used.
 * mode : Brightness control mode. PWM or register based.
 * device_control : Value of DEVICE CONTROL register.
 * initial_brightness : Initial value of backlight brightness.
-* pwm_data : Platform specific pwm generation functions.
+* period_ns : Platform specific PWM period value. unit is nano.
 	     Only valid when brightness is pwm input mode.
-	     Functions should be implemented by PWM driver.
-	     - pwm_set_intensity() : set duty of PWM
-	     - pwm_get_intensity() : get current duty of PWM
 * load_new_rom_data :
 	0 : use default configuration data
 	1 : update values of eeprom or eprom registers on loading driver
@@ -71,8 +68,5 @@ static struct lp855x_platform_data lp8556_pdata = {
 	.mode = PWM_BASED,
 	.device_control = PWM_CONFIG(LP8556),
 	.initial_brightness = INITIAL_BRT,
-	.pwm_data = {
-		     .pwm_set_intensity = platform_pwm_set_intensity,
-		     .pwm_get_intensity = platform_pwm_get_intensity,
-		     },
+	.period_ns = 1000000,
 };

Documentation/block/cfq-iosched.txt

@@ -102,6 +102,64 @@ processing of request. Therefore, increasing the value can imporve the
 performace although this can cause the latency of some I/O to increase due
 to more number of requests.
 
+CFQ Group scheduling
+====================
+
+CFQ supports blkio cgroup and has "blkio." prefixed files in each
+blkio cgroup directory. It is weight-based and there are four knobs
+for configuration - weight[_device] and leaf_weight[_device].
+Internal cgroup nodes (the ones with children) can also have tasks in
+them, so the former two configure how much proportion the cgroup as a
+whole is entitled to at its parent's level while the latter two
+configure how much proportion the tasks in the cgroup have compared to
+its direct children.
+
+Another way to think about it is assuming that each internal node has
+an implicit leaf child node which hosts all the tasks whose weight is
+configured by leaf_weight[_device]. Let's assume a blkio hierarchy
+composed of five cgroups - root, A, B, AA and AB - with the following
+weights where the names represent the hierarchy.
+
+        weight leaf_weight
+ root :  125    125
+ A    :  500    750
+ B    :  250    500
+ AA   :  500    500
+ AB   : 1000    500
+
+root never has a parent making its weight is meaningless. For backward
+compatibility, weight is always kept in sync with leaf_weight. B, AA
+and AB have no child and thus its tasks have no children cgroup to
+compete with. They always get 100% of what the cgroup won at the
+parent level. Considering only the weights which matter, the hierarchy
+looks like the following.
+
+          root
+       /    |   \
+      A     B    leaf
+     500   250   125
+   /  |  \
+  AA  AB  leaf
+ 500 1000 750
+
+If all cgroups have active IOs and competing with each other, disk
+time will be distributed like the following.
+
+Distribution below root. The total active weight at this level is
+A:500 + B:250 + C:125 = 875.
+
+ root-leaf :   125 /  875      =~ 14%
+ A         :   500 /  875      =~ 57%
+ B(-leaf)  :   250 /  875      =~ 28%
+
+A has children and further distributes its 57% among the children and
+the implicit leaf node. The total active weight at this level is
+AA:500 + AB:1000 + A-leaf:750 = 2250.
+
+ A-leaf    : ( 750 / 2250) * A =~ 19%
+ AA(-leaf) : ( 500 / 2250) * A =~ 12%
+ AB(-leaf) : (1000 / 2250) * A =~ 25%
+
 CFQ IOPS Mode for group scheduling
 ===================================
 Basic CFQ design is to provide priority based time slices. Higher priority

Documentation/blockdev/nbd.txt

@@ -4,43 +4,13 @@
    can use a remote server as one of its block devices. So every time
    the client computer wants to read, e.g., /dev/nb0, it sends a
    request over TCP to the server, which will reply with the data read.
-   This can be used for stations with low disk space (or even diskless -
-   if you boot from floppy) to borrow disk space from another computer.
-   Unlike NFS, it is possible to put any filesystem on it, etc. It should
-   even be possible to use NBD as a root filesystem (I've never tried),
-   but it requires a user-level program to be in the initrd to start.
-   It also allows you to run block-device in user land (making server
-   and client physically the same computer, communicating using loopback).
-   
-   Current state: It currently works. Network block device is stable.
-   I originally thought that it was impossible to swap over TCP. It
-   turned out not to be true - swapping over TCP now works and seems
-   to be deadlock-free, but it requires heavy patches into Linux's
-   network layer.
-   
+   This can be used for stations with low disk space (or even diskless)
+   to borrow disk space from another computer.
+   Unlike NFS, it is possible to put any filesystem on it, etc.
+
    For more information, or to download the nbd-client and nbd-server
    tools, go to http://nbd.sf.net/.
 
-   Howto: To setup nbd, you can simply do the following:
-
-   First, serve a device or file from a remote server:
-
-   nbd-server <port-number> <device-or-file-to-serve-to-client>
-
-   e.g.,
-	root@server1 # nbd-server 1234 /dev/sdb1
-
-	(serves sdb1 partition on TCP port 1234)
-
-   Then, on the local (client) system:
-
-   nbd-client <server-name-or-IP> <server-port-number> /dev/nb[0-n]
-
-   e.g.,
-	root@client1 # nbd-client server1 1234 /dev/nb0
-
-	(creates the nb0 device on client1)
-
    The nbd kernel module need only be installed on the client
    system, as the nbd-server is completely in userspace. In fact,
    the nbd-server has been successfully ported to other operating

Documentation/cgroups/00-INDEX

@@ -4,8 +4,6 @@ blkio-controller.txt
 	- Description for Block IO Controller, implementation and usage details.
 cgroups.txt
 	- Control Groups definition, implementation details, examples and API.
-cgroup_event_listener.c
-	- A user program for cgroup listener.
 cpuacct.txt
 	- CPU Accounting Controller; account CPU usage for groups of tasks.
 cpusets.txt

Documentation/cgroups/blkio-controller.txt

@@ -75,7 +75,7 @@ Throttling/Upper Limit policy
         mount -t cgroup -o blkio none /sys/fs/cgroup/blkio
 
 - Specify a bandwidth rate on particular device for root group. The format
-  for policy is "<major>:<minor>  <byes_per_second>".
+  for policy is "<major>:<minor>  <bytes_per_second>".
 
         echo "8:16  1048576" > /sys/fs/cgroup/blkio/blkio.throttle.read_bps_device
 
@@ -94,13 +94,11 @@ Throttling/Upper Limit policy
 
 Hierarchical Cgroups
 ====================
-- Currently none of the IO control policy supports hierarchical groups. But
-  cgroup interface does allow creation of hierarchical cgroups and internally
-  IO policies treat them as flat hierarchy.
+- Currently only CFQ supports hierarchical groups. For throttling,
+  cgroup interface does allow creation of hierarchical cgroups and
+  internally it treats them as flat hierarchy.
 
-  So this patch will allow creation of cgroup hierarchcy but at the backend
-  everything will be treated as flat. So if somebody created a hierarchy like
-  as follows.
+  If somebody created a hierarchy like as follows.
 
 			root
 			/  \
@@ -108,16 +106,20 @@ Hierarchical Cgroups
 			|
 		     test3
 
-  CFQ and throttling will practically treat all groups at same level.
+  CFQ will handle the hierarchy correctly but and throttling will
+  practically treat all groups at same level. For details on CFQ
+  hierarchy support, refer to Documentation/block/cfq-iosched.txt.
+  Throttling will treat the hierarchy as if it looks like the
+  following.
 
 				pivot
 			     /  /   \  \
 			root  test1 test2  test3
 
-  Down the line we can implement hierarchical accounting/control support
-  and also introduce a new cgroup file "use_hierarchy" which will control
-  whether cgroup hierarchy is viewed as flat or hierarchical by the policy..
-  This is how memory controller also has implemented the things.
+  Nesting cgroups, while allowed, isn't officially supported and blkio
+  genereates warning when cgroups nest. Once throttling implements
+  hierarchy support, hierarchy will be supported and the warning will
+  be removed.
 
 Various user visible config options
 ===================================
@@ -172,6 +174,12 @@ Proportional weight policy files
 	  dev     weight
 	  8:16    300
 
+- blkio.leaf_weight[_device]
+	- Equivalents of blkio.weight[_device] for the purpose of
+          deciding how much weight tasks in the given cgroup has while
+          competing with the cgroup's child cgroups. For details,
+          please refer to Documentation/block/cfq-iosched.txt.
+
 - blkio.time
 	- disk time allocated to cgroup per device in milliseconds. First
 	  two fields specify the major and minor number of the device and
@@ -279,6 +287,11 @@ Proportional weight policy files
 	  and minor number of the device and third field specifies the number
 	  of times a group was dequeued from a particular device.
 
+- blkio.*_recursive
+	- Recursive version of various stats. These files show the
+          same information as their non-recursive counterparts but
+          include stats from all the descendant cgroups.
+
 Throttling/Upper limit policy files
 -----------------------------------
 - blkio.throttle.read_bps_device

Documentation/cgroups/memcg_test.txt

@@ -399,8 +399,7 @@ Under below explanation, we assume CONFIG_MEM_RES_CTRL_SWAP=y.
 
  9.10 Memory thresholds
 	Memory controller implements memory thresholds using cgroups notification
-	API. You can use Documentation/cgroups/cgroup_event_listener.c to test
-	it.
+	API. You can use tools/cgroup/cgroup_event_listener.c to test it.
 
 	(Shell-A) Create cgroup and run event listener
 	# mkdir /cgroup/A

Documentation/cgroups/memory.txt

@@ -71,6 +71,11 @@ Brief summary of control files.
  memory.oom_control		 # set/show oom controls.
  memory.numa_stat		 # show the number of memory usage per numa node
 
+ memory.kmem.limit_in_bytes      # set/show hard limit for kernel memory
+ memory.kmem.usage_in_bytes      # show current kernel memory allocation
+ memory.kmem.failcnt             # show the number of kernel memory usage hits limits
+ memory.kmem.max_usage_in_bytes  # show max kernel memory usage recorded
+
  memory.kmem.tcp.limit_in_bytes  # set/show hard limit for tcp buf memory
  memory.kmem.tcp.usage_in_bytes  # show current tcp buf memory allocation
  memory.kmem.tcp.failcnt            # show the number of tcp buf memory usage hits limits
@@ -268,20 +273,73 @@ the amount of kernel memory used by the system. Kernel memory is fundamentally
 different than user memory, since it can't be swapped out, which makes it
 possible to DoS the system by consuming too much of this precious resource.
 
+Kernel memory won't be accounted at all until limit on a group is set. This
+allows for existing setups to continue working without disruption.  The limit
+cannot be set if the cgroup have children, or if there are already tasks in the
+cgroup. Attempting to set the limit under those conditions will return -EBUSY.
+When use_hierarchy == 1 and a group is accounted, its children will
+automatically be accounted regardless of their limit value.
+
+After a group is first limited, it will be kept being accounted until it
+is removed. The memory limitation itself, can of course be removed by writing
+-1 to memory.kmem.limit_in_bytes. In this case, kmem will be accounted, but not
+limited.
+
 Kernel memory limits are not imposed for the root cgroup. Usage for the root
-cgroup may or may not be accounted.
+cgroup may or may not be accounted. The memory used is accumulated into
+memory.kmem.usage_in_bytes, or in a separate counter when it makes sense.
+(currently only for tcp).
+The main "kmem" counter is fed into the main counter, so kmem charges will
+also be visible from the user counter.
 
 Currently no soft limit is implemented for kernel memory. It is future work
 to trigger slab reclaim when those limits are reached.
 
 2.7.1 Current Kernel Memory resources accounted
 
+* stack pages: every process consumes some stack pages. By accounting into
+kernel memory, we prevent new processes from being created when the kernel
+memory usage is too high.
+
+* slab pages: pages allocated by the SLAB or SLUB allocator are tracked. A copy
+of each kmem_cache is created everytime the cache is touched by the first time
+from inside the memcg. The creation is done lazily, so some objects can still be
+skipped while the cache is being created. All objects in a slab page should
+belong to the same memcg. This only fails to hold when a task is migrated to a
+different memcg during the page allocation by the cache.
+
 * sockets memory pressure: some sockets protocols have memory pressure
 thresholds. The Memory Controller allows them to be controlled individually
 per cgroup, instead of globally.
 
 * tcp memory pressure: sockets memory pressure for the tcp protocol.
 
+2.7.3 Common use cases
+
+Because the "kmem" counter is fed to the main user counter, kernel memory can
+never be limited completely independently of user memory. Say "U" is the user
+limit, and "K" the kernel limit. There are three possible ways limits can be
+set:
+
+    U != 0, K = unlimited:
+    This is the standard memcg limitation mechanism already present before kmem
+    accounting. Kernel memory is completely ignored.
+
+    U != 0, K < U:
+    Kernel memory is a subset of the user memory. This setup is useful in
+    deployments where the total amount of memory per-cgroup is overcommited.
+    Overcommiting kernel memory limits is definitely not recommended, since the
+    box can still run out of non-reclaimable memory.
+    In this case, the admin could set up K so that the sum of all groups is
+    never greater than the total memory, and freely set U at the cost of his
+    QoS.
+
+    U != 0, K >= U:
+    Since kmem charges will also be fed to the user counter and reclaim will be
+    triggered for the cgroup for both kinds of memory. This setup gives the
+    admin a unified view of memory, and it is also useful for people who just
+    want to track kernel memory usage.
+
 3. User Interface
 
 0. Configuration
@@ -290,6 +348,7 @@ a. Enable CONFIG_CGROUPS
 b. Enable CONFIG_RESOURCE_COUNTERS
 c. Enable CONFIG_MEMCG
 d. Enable CONFIG_MEMCG_SWAP (to use swap extension)
+d. Enable CONFIG_MEMCG_KMEM (to use kmem extension)
 
 1. Prepare the cgroups (see cgroups.txt, Why are cgroups needed?)
 # mount -t tmpfs none /sys/fs/cgroup
@@ -406,6 +465,11 @@ About use_hierarchy, see Section 6.
   Because rmdir() moves all pages to parent, some out-of-use page caches can be
   moved to the parent. If you want to avoid that, force_empty will be useful.
 
+  Also, note that when memory.kmem.limit_in_bytes is set the charges due to
+  kernel pages will still be seen. This is not considered a failure and the
+  write will still return success. In this case, it is expected that
+  memory.kmem.usage_in_bytes == memory.usage_in_bytes.
+
   About use_hierarchy, see Section 6.
 
 5.2 stat file

Documentation/cgroups/resource_counter.txt

@@ -83,16 +83,17 @@ to work with it.
 	res_counter->lock internally (it must be called with res_counter->lock
 	held). The force parameter indicates whether we can bypass the limit.
 
- e. void res_counter_uncharge[_locked]
+ e. u64 res_counter_uncharge[_locked]
 			(struct res_counter *rc, unsigned long val)
 
 	When a resource is released (freed) it should be de-accounted
 	from the resource counter it was accounted to.  This is called
-	"uncharging".
+	"uncharging". The return value of this function indicate the amount
+	of charges still present in the counter.
 
 	The _locked routines imply that the res_counter->lock is taken.
 
- f. void res_counter_uncharge_until
+ f. u64 res_counter_uncharge_until
 		(struct res_counter *rc, struct res_counter *top,
 		 unsinged long val)
 

Documentation/coccinelle.txt

@@ -87,6 +87,10 @@ As any static code analyzer, Coccinelle produces false
 positives. Thus, reports must be carefully checked, and patches
 reviewed.
 
+To enable verbose messages set the V= variable, for example:
+
+   make coccicheck MODE=report V=1
+
 
  Using Coccinelle with a single semantic patch
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Documentation/cpu-freq/cpu-drivers.txt

@@ -111,6 +111,12 @@ policy->governor		must contain the "default policy" for
 For setting some of these values, the frequency table helpers might be
 helpful. See the section 2 for more information on them.
 
+SMP systems normally have same clock source for a group of cpus. For these the
+.init() would be called only once for the first online cpu. Here the .init()
+routine must initialize policy->cpus with mask of all possible cpus (Online +
+Offline) that share the clock. Then the core would copy this mask onto
+policy->related_cpus and will reset policy->cpus to carry only online cpus.
+
 
 1.3 verify
 ------------

Documentation/cpu-freq/user-guide.txt

@@ -190,11 +190,11 @@ scaling_max_freq		show the current "policy limits" (in
 				first set scaling_max_freq, then
 				scaling_min_freq.
 
-affected_cpus :			List of CPUs that require software coordination
-				of frequency.
+affected_cpus :			List of Online CPUs that require software
+				coordination of frequency.
 
-related_cpus :			List of CPUs that need some sort of frequency
-				coordination, whether software or hardware.
+related_cpus :			List of Online + Offline CPUs that need software
+				coordination of frequency.
 
 scaling_driver :		Hardware driver for cpufreq.
 

Documentation/device-mapper/cache-policies.txt

@@ -0,0 +1,77 @@
+Guidance for writing policies
+=============================
+
+Try to keep transactionality out of it.  The core is careful to
+avoid asking about anything that is migrating.  This is a pain, but
+makes it easier to write the policies.
+
+Mappings are loaded into the policy at construction time.
+
+Every bio that is mapped by the target is referred to the policy.
+The policy can return a simple HIT or MISS or issue a migration.
+
+Currently there's no way for the policy to issue background work,
+e.g. to start writing back dirty blocks that are going to be evicte
+soon.
+
+Because we map bios, rather than requests it's easy for the policy
+to get fooled by many small bios.  For this reason the core target
+issues periodic ticks to the policy.  It's suggested that the policy
+doesn't update states (eg, hit counts) for a block more than once
+for each tick.  The core ticks by watching bios complete, and so
+trying to see when the io scheduler has let the ios run.
+
+
+Overview of supplied cache replacement policies
+===============================================
+
+multiqueue
+----------
+
+This policy is the default.
+
+The multiqueue policy has two sets of 16 queues: one set for entries
+waiting for the cache and another one for those in the cache.
+Cache entries in the queues are aged based on logical time. Entry into
+the cache is based on variable thresholds and queue selection is based
+on hit count on entry. The policy aims to take different cache miss
+costs into account and to adjust to varying load patterns automatically.
+
+Message and constructor argument pairs are:
+	'sequential_threshold <#nr_sequential_ios>' and
+	'random_threshold <#nr_random_ios>'.
+
+The sequential threshold indicates the number of contiguous I/Os
+required before a stream is treated as sequential.  The random threshold
+is the number of intervening non-contiguous I/Os that must be seen
+before the stream is treated as random again.
+
+The sequential and random thresholds default to 512 and 4 respectively.
+
+Large, sequential ios are probably better left on the origin device
+since spindles tend to have good bandwidth. The io_tracker counts
+contiguous I/Os to try to spot when the io is in one of these sequential
+modes.
+
+cleaner
+-------
+
+The cleaner writes back all dirty blocks in a cache to decommission it.
+
+Examples
+========
+
+The syntax for a table is:
+	cache <metadata dev> <cache dev> <origin dev> <block size>
+	<#feature_args> [<feature arg>]*
+	<policy> <#policy_args> [<policy arg>]*
+
+The syntax to send a message using the dmsetup command is:
+	dmsetup message <mapped device> 0 sequential_threshold 1024
+	dmsetup message <mapped device> 0 random_threshold 8
+
+Using dmsetup:
+	dmsetup create blah --table "0 268435456 cache /dev/sdb /dev/sdc \
+	    /dev/sdd 512 0 mq 4 sequential_threshold 1024 random_threshold 8"
+	creates a 128GB large mapped device named 'blah' with the
+	sequential threshold set to 1024 and the random_threshold set to 8.

Documentation/device-mapper/cache.txt

@@ -0,0 +1,243 @@
+Introduction
+============
+
+dm-cache is a device mapper target written by Joe Thornber, Heinz
+Mauelshagen, and Mike Snitzer.
+
+It aims to improve performance of a block device (eg, a spindle) by
+dynamically migrating some of its data to a faster, smaller device
+(eg, an SSD).
+
+This device-mapper solution allows us to insert this caching at
+different levels of the dm stack, for instance above the data device for
+a thin-provisioning pool.  Caching solutions that are integrated more
+closely with the virtual memory system should give better performance.
+
+The target reuses the metadata library used in the thin-provisioning
+library.
+
+The decision as to what data to migrate and when is left to a plug-in
+policy module.  Several of these have been written as we experiment,
+and we hope other people will contribute others for specific io
+scenarios (eg. a vm image server).
+
+Glossary
+========
+
+  Migration -  Movement of the primary copy of a logical block from one
+	       device to the other.
+  Promotion -  Migration from slow device to fast device.
+  Demotion  -  Migration from fast device to slow device.
+
+The origin device always contains a copy of the logical block, which
+may be out of date or kept in sync with the copy on the cache device
+(depending on policy).
+
+Design
+======
+
+Sub-devices
+-----------
+
+The target is constructed by passing three devices to it (along with
+other parameters detailed later):
+
+1. An origin device - the big, slow one.
+
+2. A cache device - the small, fast one.
+
+3. A small metadata device - records which blocks are in the cache,
+   which are dirty, and extra hints for use by the policy object.
+   This information could be put on the cache device, but having it
+   separate allows the volume manager to configure it differently,
+   e.g. as a mirror for extra robustness.
+
+Fixed block size
+----------------
+
+The origin is divided up into blocks of a fixed size.  This block size
+is configurable when you first create the cache.  Typically we've been
+using block sizes of 256k - 1024k.
+
+Having a fixed block size simplifies the target a lot.  But it is
+something of a compromise.  For instance, a small part of a block may be
+getting hit a lot, yet the whole block will be promoted to the cache.
+So large block sizes are bad because they waste cache space.  And small
+block sizes are bad because they increase the amount of metadata (both
+in core and on disk).
+
+Writeback/writethrough
+----------------------
+
+The cache has two modes, writeback and writethrough.
+
+If writeback, the default, is selected then a write to a block that is
+cached will go only to the cache and the block will be marked dirty in
+the metadata.
+
+If writethrough is selected then a write to a cached block will not
+complete until it has hit both the origin and cache devices.  Clean
+blocks should remain clean.
+
+A simple cleaner policy is provided, which will clean (write back) all
+dirty blocks in a cache.  Useful for decommissioning a cache.
+
+Migration throttling
+--------------------
+
+Migrating data between the origin and cache device uses bandwidth.
+The user can set a throttle to prevent more than a certain amount of
+migration occuring at any one time.  Currently we're not taking any
+account of normal io traffic going to the devices.  More work needs
+doing here to avoid migrating during those peak io moments.
+
+For the time being, a message "migration_threshold <#sectors>"
+can be used to set the maximum number of sectors being migrated,
+the default being 204800 sectors (or 100MB).
+
+Updating on-disk metadata
+-------------------------
+
+On-disk metadata is committed every time a REQ_SYNC or REQ_FUA bio is
+written.  If no such requests are made then commits will occur every
+second.  This means the cache behaves like a physical disk that has a
+write cache (the same is true of the thin-provisioning target).  If
+power is lost you may lose some recent writes.  The metadata should
+always be consistent in spite of any crash.
+
+The 'dirty' state for a cache block changes far too frequently for us
+to keep updating it on the fly.  So we treat it as a hint.  In normal
+operation it will be written when the dm device is suspended.  If the
+system crashes all cache blocks will be assumed dirty when restarted.
+
+Per-block policy hints
+----------------------
+
+Policy plug-ins can store a chunk of data per cache block.  It's up to
+the policy how big this chunk is, but it should be kept small.  Like the
+dirty flags this data is lost if there's a crash so a safe fallback
+value should always be possible.
+
+For instance, the 'mq' policy, which is currently the default policy,
+uses this facility to store the hit count of the cache blocks.  If
+there's a crash this information will be lost, which means the cache
+may be less efficient until those hit counts are regenerated.
+
+Policy hints affect performance, not correctness.
+
+Policy messaging
+----------------
+
+Policies will have different tunables, specific to each one, so we
+need a generic way of getting and setting these.  Device-mapper
+messages are used.  Refer to cache-policies.txt.
+
+Discard bitset resolution
+-------------------------
+
+We can avoid copying data during migration if we know the block has
+been discarded.  A prime example of this is when mkfs discards the
+whole block device.  We store a bitset tracking the discard state of
+blocks.  However, we allow this bitset to have a different block size
+from the cache blocks.  This is because we need to track the discard
+state for all of the origin device (compare with the dirty bitset
+which is just for the smaller cache device).
+
+Target interface
+================
+
+Constructor
+-----------
+
+ cache <metadata dev> <cache dev> <origin dev> <block size>
+       <#feature args> [<feature arg>]*
+       <policy> <#policy args> [policy args]*
+
+ metadata dev    : fast device holding the persistent metadata
+ cache dev	 : fast device holding cached data blocks
+ origin dev	 : slow device holding original data blocks
+ block size      : cache unit size in sectors
+
+ #feature args   : number of feature arguments passed
+ feature args    : writethrough.  (The default is writeback.)
+
+ policy          : the replacement policy to use
+ #policy args    : an even number of arguments corresponding to
+                   key/value pairs passed to the policy
+ policy args     : key/value pairs passed to the policy
+		   E.g. 'sequential_threshold 1024'
+		   See cache-policies.txt for details.
+
+Optional feature arguments are:
+   writethrough  : write through caching that prohibits cache block
+		   content from being different from origin block content.
+		   Without this argument, the default behaviour is to write
+		   back cache block contents later for performance reasons,
+		   so they may differ from the corresponding origin blocks.
+
+A policy called 'default' is always registered.  This is an alias for
+the policy we currently think is giving best all round performance.
+
+As the default policy could vary between kernels, if you are relying on
+the characteristics of a specific policy, always request it by name.
+
+Status
+------
+
+<#used metadata blocks>/<#total metadata blocks> <#read hits> <#read misses>
+<#write hits> <#write misses> <#demotions> <#promotions> <#blocks in cache>
+<#dirty> <#features> <features>* <#core args> <core args>* <#policy args>
+<policy args>*
+
+#used metadata blocks    : Number of metadata blocks used
+#total metadata blocks   : Total number of metadata blocks
+#read hits               : Number of times a READ bio has been mapped
+			     to the cache
+#read misses             : Number of times a READ bio has been mapped
+			     to the origin
+#write hits              : Number of times a WRITE bio has been mapped
+			     to the cache
+#write misses            : Number of times a WRITE bio has been
+			     mapped to the origin
+#demotions               : Number of times a block has been removed
+			     from the cache
+#promotions              : Number of times a block has been moved to
+			     the cache
+#blocks in cache         : Number of blocks resident in the cache
+#dirty                   : Number of blocks in the cache that differ
+			     from the origin
+#feature args            : Number of feature args to follow
+feature args             : 'writethrough' (optional)
+#core args               : Number of core arguments (must be even)
+core args                : Key/value pairs for tuning the core
+			     e.g. migration_threshold
+#policy args             : Number of policy arguments to follow (must be even)
+policy args              : Key/value pairs
+			     e.g. 'sequential_threshold 1024
+
+Messages
+--------
+
+Policies will have different tunables, specific to each one, so we
+need a generic way of getting and setting these.  Device-mapper
+messages are used.  (A sysfs interface would also be possible.)
+
+The message format is:
+
+   <key> <value>
+
+E.g.
+   dmsetup message my_cache 0 sequential_threshold 1024
+
+Examples
+========
+
+The test suite can be found here:
+
+https://github.com/jthornber/thinp-test-suite
+
+dmsetup create my_cache --table '0 41943040 cache /dev/mapper/metadata \
+	/dev/mapper/ssd /dev/mapper/origin 512 1 writeback default 0'
+dmsetup create my_cache --table '0 41943040 cache /dev/mapper/metadata \
+	/dev/mapper/ssd /dev/mapper/origin 1024 1 writeback \
+	mq 4 sequential_threshold 1024 random_threshold 8'

Documentation/device-mapper/dm-raid.txt

@@ -141,3 +141,4 @@ Version History
 1.2.0	Handle creation of arrays that contain failed devices.
 1.3.0	Added support for RAID 10
 1.3.1	Allow device replacement/rebuild for RAID 10
+1.3.2   Fix/improve redundancy checking for RAID10

Documentation/devicetree/bindings/arc/interrupts.txt

@@ -0,0 +1,24 @@
+* ARC700 incore Interrupt Controller
+
+  The core interrupt controller provides 32 prioritised interrupts (2 levels)
+  to ARC700 core.
+
+Properties:
+
+- compatible: "snps,arc700-intc"
+- interrupt-controller: This is an interrupt controller.
+- #interrupt-cells: Must be <1>.
+
+  Single Cell "interrupts" property of a device specifies the IRQ number
+  between 0 to 31
+
+  intc accessed via the special ARC AUX register interface, hence "reg" property
+  is not specified.
+
+Example:
+
+	intc: interrupt-controller {
+		compatible = "snps,arc700-intc";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};

Documentation/devicetree/bindings/arm/altera/socfpga-reset.txt

@@ -0,0 +1,11 @@
+Altera SOCFPGA Reset Manager
+
+Required properties:
+- compatible : "altr,rst-mgr"
+- reg : Should contain 1 register ranges(address and length)
+
+Example:
+	 rstmgr@ffd05000 {
+		compatible = "altr,rst-mgr";
+		reg = <0xffd05000 0x1000>;
+	};

Documentation/devicetree/bindings/arm/altera/socfpga-system.txt

@@ -0,0 +1,13 @@
+Altera SOCFPGA System Manager
+
+Required properties:
+- compatible : "altr,sys-mgr"
+- reg : Should contain 1 register ranges(address and length)
+- cpu1-start-addr : CPU1 start address in hex.
+
+Example:
+	 sysmgr@ffd08000 {
+		compatible = "altr,sys-mgr";
+		reg = <0xffd08000 0x1000>;
+		cpu1-start-addr = <0xffd080c4>;
+	};

Documentation/devicetree/bindings/arm/arch_timer.txt

@@ -1,13 +1,14 @@
 * ARM architected timer
 
-ARM Cortex-A7 and Cortex-A15 have a per-core architected timer, which
-provides per-cpu timers.
+ARM cores may have a per-core architected timer, which provides per-cpu timers.
 
 The timer is attached to a GIC to deliver its per-processor interrupts.
 
 ** Timer node properties:
 
-- compatible : Should at least contain "arm,armv7-timer".
+- compatible : Should at least contain one of
+	"arm,armv7-timer"
+	"arm,armv8-timer"
 
 - interrupts : Interrupt list for secure, non-secure, virtual and
   hypervisor timers, in that order.

Documentation/devicetree/bindings/arm/armada-370-xp-mpic.txt

@@ -6,9 +6,15 @@ Required properties:
 - interrupt-controller: Identifies the node as an interrupt controller.
 - #interrupt-cells: The number of cells to define the interrupts. Should be 1.
   The cell is the IRQ number
+
 - reg: Should contain PMIC registers location and length. First pair
   for the main interrupt registers, second pair for the per-CPU
-  interrupt registers
+  interrupt registers. For this last pair, to be compliant with SMP
+  support, the "virtual" must be use (For the record, these registers
+  automatically map to the interrupt controller registers of the
+  current CPU)
+
+
 
 Example:
 
@@ -18,6 +24,6 @@ Example:
               #address-cells = <1>;
               #size-cells = <1>;
               interrupt-controller;
-              reg = <0xd0020000 0x1000>,
-                    <0xd0021000 0x1000>;
+              reg = <0xd0020a00 0x1d0>,
+                    <0xd0021070 0x58>;
         };

Documentation/devicetree/bindings/arm/armada-370-xp-pmsu.txt

@@ -0,0 +1,20 @@
+Power Management Service Unit(PMSU)
+-----------------------------------
+Available on Marvell SOCs: Armada 370 and Armada XP
+
+Required properties:
+
+- compatible: "marvell,armada-370-xp-pmsu"
+
+- reg: Should contain PMSU registers location and length. First pair
+  for the per-CPU SW Reset Control registers, second pair for the
+  Power Management Service Unit.
+
+Example:
+
+armada-370-xp-pmsu@d0022000 {
+	compatible = "marvell,armada-370-xp-pmsu";
+	reg = <0xd0022100 0x430>,
+	      <0xd0020800 0x20>;
+};
+

Documentation/devicetree/bindings/arm/armada-370-xp-timer.txt

@@ -1,11 +0,0 @@
-Marvell Armada 370 and Armada XP Global Timers
-----------------------------------------------
-
-Required properties:
-- compatible: Should be "marvell,armada-370-xp-timer"
-- interrupts: Should contain the list of Global Timer interrupts
-- reg: Should contain the base address of the Global Timer registers
-
-Optional properties:
-- marvell,timer-25Mhz: Tells whether the Global timer supports the 25
-  Mhz fixed mode (available on Armada XP and not on Armada 370)

Documentation/devicetree/bindings/arm/armadeus.txt

@@ -0,0 +1,6 @@
+Armadeus i.MX Platforms Device Tree Bindings
+-----------------------------------------------
+
+APF51: i.MX51 based module.
+Required root node properties:
+    - compatible = "armadeus,imx51-apf51", "fsl,imx51";

Documentation/devicetree/bindings/arm/atmel-aic.txt

@@ -4,7 +4,7 @@ Required properties:
 - compatible: Should be "atmel,<chip>-aic"
 - interrupt-controller: Identifies the node as an interrupt controller.
 - interrupt-parent: For single AIC system, it is an empty property.
-- #interrupt-cells: The number of cells to define the interrupts. It sould be 3.
+- #interrupt-cells: The number of cells to define the interrupts. It should be 3.
   The first cell is the IRQ number (aka "Peripheral IDentifier" on datasheet).
   The second cell is used to specify flags:
     bits[3:0] trigger type and level flags:

Documentation/devicetree/bindings/arm/coherency-fabric.txt

@@ -0,0 +1,21 @@
+Coherency fabric
+----------------
+Available on Marvell SOCs: Armada 370 and Armada XP
+
+Required properties:
+
+- compatible: "marvell,coherency-fabric"
+
+- reg: Should contain coherency fabric registers location and
+  length. First pair for the coherency fabric registers, second pair
+  for the per-CPU fabric registers registers.
+
+Example:
+
+coherency-fabric@d0020200 {
+	compatible = "marvell,coherency-fabric";
+	reg = <0xd0020200 0xb0>,
+		<0xd0021810 0x1c>;
+
+};
+