Merge 4.2-rc3 into staging-next

We need the staging fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

.mailmap

@@ -116,6 +116,7 @@ Shiraz Hashim <shiraz.linux.kernel@gmail.com> <shiraz.hashim@st.com>
 Simon Kelley <simon@thekelleys.org.uk>
 Stéphane Witzmann <stephane.witzmann@ubpmes.univ-bpclermont.fr>
 Stephen Hemminger <shemminger@osdl.org>
+Sudeep Holla <sudeep.holla@arm.com> Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>
 Sumit Semwal <sumit.semwal@ti.com>
 Tejun Heo <htejun@gmail.com>
 Thomas Graf <tgraf@suug.ch>
@@ -125,7 +126,9 @@ Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
 Uwe Kleine-König <ukl@pengutronix.de>
 Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
 Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
-Viresh Kumar <viresh.linux@gmail.com> <viresh.kumar@st.com>
+Viresh Kumar <vireshk@kernel.org> <viresh.kumar@st.com>
+Viresh Kumar <vireshk@kernel.org> <viresh.linux@gmail.com>
+Viresh Kumar <vireshk@kernel.org> <viresh.kumar2@arm.com>
 Takashi YOSHII <takashi.yoshii.zj@renesas.com>
 Yusuke Goda <goda.yusuke@renesas.com>
 Gustavo Padovan <gustavo@las.ic.unicamp.br>

Documentation/ABI/testing/sysfs-bus-iio

@@ -1239,10 +1239,8 @@ Description:
 		object is near the sensor, usually be observing
 		reflectivity of infrared or ultrasound emitted.
 		Often these sensors are unit less and as such conversion
-		to SI units is not possible.  Where it is, the units should
-		be meters.  If such a conversion is not possible, the reported
-		values should behave in the same way as a distance, i.e. lower
-		values indicate something is closer to the sensor.
+		to SI units is not possible. Higher proximity measurements
+		indicate closer objects, and vice versa.
 
 What:		/sys/.../iio:deviceX/in_illuminance_input
 What:		/sys/.../iio:deviceX/in_illuminance_raw

Documentation/DocBook/drm.tmpl

@@ -3383,7 +3383,7 @@ void intel_crt_init(struct drm_device *dev)
 	<td valign="top" >TBD</td>
 	</tr>
 	<tr>
-	<td rowspan="2" valign="top" >omap</td>
+	<td valign="top" >omap</td>
 	<td valign="top" >Generic</td>
 	<td valign="top" >“zorder”</td>
 	<td valign="top" >RANGE</td>

Documentation/arm/SPEAr/overview.txt

@@ -60,4 +60,4 @@ Introduction
   Document Author
   ---------------
 
-  Viresh Kumar <viresh.linux@gmail.com>, (c) 2010-2012 ST Microelectronics
+  Viresh Kumar <vireshk@kernel.org>, (c) 2010-2012 ST Microelectronics

Documentation/arm/sunxi/README

@@ -36,7 +36,7 @@ SunXi family
         + User Manual
           http://dl.linux-sunxi.org/A20/A20%20User%20Manual%202013-03-22.pdf
 
-      - Allwinner A23
+      - Allwinner A23 (sun8i)
         + Datasheet
           http://dl.linux-sunxi.org/A23/A23%20Datasheet%20V1.0%2020130830.pdf
         + User Manual
@@ -55,7 +55,23 @@ SunXi family
         + User Manual
           http://dl.linux-sunxi.org/A31/A3x_release_document/A31s/IC/A31s%20User%20Manual%20%20V1.0%2020130322.pdf
 
+      - Allwinner A33 (sun8i)
+        + Datasheet
+          http://dl.linux-sunxi.org/A33/A33%20Datasheet%20release%201.1.pdf
+        + User Manual
+          http://dl.linux-sunxi.org/A33/A33%20user%20manual%20release%201.1.pdf
+
+      - Allwinner H3 (sun8i)
+        + Datasheet
+          http://dl.linux-sunxi.org/H3/Allwinner_H3_Datasheet_V1.0.pdf
+
     * Quad ARM Cortex-A15, Quad ARM Cortex-A7 based SoCs
       - Allwinner A80
         + Datasheet
 	  http://dl.linux-sunxi.org/A80/A80_Datasheet_Revision_1.0_0404.pdf
+
+    * Octa ARM Cortex-A7 based SoCs
+      - Allwinner A83T
+        + Not Supported
+        + Datasheet
+          http://dl.linux-sunxi.org/A83T/A83T_datasheet_Revision_1.1.pdf

Documentation/device-mapper/cache.txt

@@ -258,6 +258,12 @@ cache metadata mode      : ro if read-only, rw if read-write
 	no further I/O will be permitted and the status will just
 	contain the string 'Fail'.  The userspace recovery tools
 	should then be used.
+needs_check		 : 'needs_check' if set, '-' if not set
+	A metadata operation has failed, resulting in the needs_check
+	flag being set in the metadata's superblock.  The metadata
+	device must be deactivated and checked/repaired before the
+	cache can be made fully operational again.  '-' indicates
+	needs_check is not set.
 
 Messages
 --------

Documentation/device-mapper/thin-provisioning.txt

@@ -296,7 +296,7 @@ ii) Status
 	underlying device.  When this is enabled when loading the table,
 	it can get disabled if the underlying device doesn't support it.
 
-    ro|rw
+    ro|rw|out_of_data_space
 	If the pool encounters certain types of device failures it will
 	drop into a read-only metadata mode in which no changes to
 	the pool metadata (like allocating new blocks) are permitted.
@@ -314,6 +314,13 @@ ii) Status
 	module parameter can be used to change this timeout -- it
 	defaults to 60 seconds but may be disabled using a value of 0.
 
+    needs_check
+	A metadata operation has failed, resulting in the needs_check
+	flag being set in the metadata's superblock.  The metadata
+	device must be deactivated and checked/repaired before the
+	thin-pool can be made fully operational again.  '-' indicates
+	needs_check is not set.
+
 iii) Messages
 
     create_thin <dev id>

Documentation/devicetree/bindings/arm/sunxi.txt

@@ -9,4 +9,6 @@ using one of the following compatible strings:
   allwinner,sun6i-a31
   allwinner,sun7i-a20
   allwinner,sun8i-a23
+  allwinner,sun8i-a33
+  allwinner,sun8i-h3
   allwinner,sun9i-a80

Documentation/devicetree/bindings/drm/imx/fsl-imx-drm.txt

@@ -65,8 +65,10 @@ Optional properties:
 - edid: verbatim EDID data block describing attached display.
 - ddc: phandle describing the i2c bus handling the display data
   channel
-- port: A port node with endpoint definitions as defined in
+- port@[0-1]: Port nodes with endpoint definitions as defined in
   Documentation/devicetree/bindings/media/video-interfaces.txt.
+  Port 0 is the input port connected to the IPU display interface,
+  port 1 is the output port connected to a panel.
 
 example:
 
@@ -75,9 +77,29 @@ display@di0 {
 	edid = [edid-data];
 	interface-pix-fmt = "rgb24";
 
-	port {
+	port@0 {
+		reg = <0>;
+
 		display_in: endpoint {
 			remote-endpoint = <&ipu_di0_disp0>;
 		};
 	};
+
+	port@1 {
+		reg = <1>;
+
+		display_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+panel {
+	...
+
+	port {
+		panel_in: endpoint {
+			remote-endpoint = <&display_out>;
+		};
+	};
 };

Documentation/devicetree/bindings/memory-controllers/ti/emif.txt

@@ -8,6 +8,7 @@ of the EMIF IP and memory parts attached to it.
 Required properties:
 - compatible	: Should be of the form "ti,emif-<ip-rev>" where <ip-rev>
   is the IP revision of the specific EMIF instance.
+		  For am437x should be ti,emif-am4372.
 
 - phy-type	: <u32> indicating the DDR phy type. Following are the
   allowed values

Documentation/kbuild/makefiles.txt

@@ -952,6 +952,14 @@ When kbuild executes, the following steps are followed (roughly):
 	$(KBUILD_ARFLAGS) set by the top level Makefile to "D" (deterministic
 	mode) if this option is supported by $(AR).
 
+    ARCH_CPPFLAGS, ARCH_AFLAGS, ARCH_CFLAGS   Overrides the kbuild defaults
+
+	These variables are appended to the KBUILD_CPPFLAGS,
+	KBUILD_AFLAGS, and KBUILD_CFLAGS, respectively, after the
+	top-level Makefile has set any other flags. This provides a
+	means for an architecture to override the defaults.
+
+
 --- 6.2 Add prerequisites to archheaders:
 
 	The archheaders: rule is used to generate header files that

Documentation/power/swsusp.txt

@@ -410,8 +410,17 @@ Documentation/usb/persist.txt.
 
 Q: Can I suspend-to-disk using a swap partition under LVM?
 
-A: No. You can suspend successfully, but you'll not be able to
-resume. uswsusp should be able to work with LVM. See suspend.sf.net.
+A: Yes and No.  You can suspend successfully, but the kernel will not be able
+to resume on its own.  You need an initramfs that can recognize the resume
+situation, activate the logical volume containing the swap volume (but not
+touch any filesystems!), and eventually call
+
+echo -n "$major:$minor" > /sys/power/resume
+
+where $major and $minor are the respective major and minor device numbers of
+the swap volume.
+
+uswsusp works with LVM, too.  See http://suspend.sourceforge.net/
 
 Q: I upgraded the kernel from 2.6.15 to 2.6.16. Both kernels were
 compiled with the similar configuration files. Anyway I found that

MAINTAINERS

@@ -361,11 +361,11 @@ S:	Supported
 F:	drivers/input/touchscreen/ad7879.c
 
 ADDRESS SPACE LAYOUT RANDOMIZATION (ASLR)
-M:	Jiri Kosina <jkosina@suse.cz>
+M:	Jiri Kosina <jkosina@suse.com>
 S:	Maintained
 
 ADM1025 HARDWARE MONITOR DRIVER
-M:	Jean Delvare <jdelvare@suse.de>
+M:	Jean Delvare <jdelvare@suse.com>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	Documentation/hwmon/adm1025
@@ -430,7 +430,7 @@ S:	Maintained
 F:	drivers/macintosh/therm_adt746x.c
 
 ADT7475 HARDWARE MONITOR DRIVER
-M:	Jean Delvare <jdelvare@suse.de>
+M:	Jean Delvare <jdelvare@suse.com>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	Documentation/hwmon/adt7475
@@ -445,7 +445,7 @@ F:	drivers/input/misc/adxl34x.c
 
 ADVANSYS SCSI DRIVER
 M:	Matthew Wilcox <matthew@wil.cx>
-M:	Hannes Reinecke <hare@suse.de>
+M:	Hannes Reinecke <hare@suse.com>
 L:	linux-scsi@vger.kernel.org
 S:	Maintained
 F:	Documentation/scsi/advansys.txt
@@ -506,7 +506,7 @@ F:	drivers/scsi/aha152x*
 F:	drivers/scsi/pcmcia/aha152x*
 
 AIC7XXX / AIC79XX SCSI DRIVER
-M:	Hannes Reinecke <hare@suse.de>
+M:	Hannes Reinecke <hare@suse.com>
 L:	linux-scsi@vger.kernel.org
 S:	Maintained
 F:	drivers/scsi/aic7xxx/
@@ -746,7 +746,7 @@ S:	Maintained
 F:	sound/aoa/
 
 APM DRIVER
-M:	Jiri Kosina <jkosina@suse.cz>
+M:	Jiri Kosina <jkosina@suse.com>
 S:	Odd fixes
 F:	arch/x86/kernel/apm_32.c
 F:	include/linux/apm_bios.h
@@ -1001,6 +1001,7 @@ ARM/CONEXANT DIGICOLOR MACHINE SUPPORT
 M:	Baruch Siach <baruch@tkos.co.il>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
+F:	arch/arm/boot/dts/cx92755*
 N:	digicolor
 
 ARM/EBSA110 MACHINE SUPPORT
@@ -1324,7 +1325,7 @@ F:	arch/arm/mach-pxa/include/mach/palmtc.h
 F:	arch/arm/mach-pxa/palmtc.c
 
 ARM/PALM TREO SUPPORT
-M:	Tomas Cech <sleep_walker@suse.cz>
+M:	Tomas Cech <sleep_walker@suse.com>
 L:	linux-arm-kernel@lists.infradead.org
 W:	http://hackndev.com
 S:	Maintained
@@ -1614,6 +1615,7 @@ M:	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm/boot/dts/vexpress*
+F:	arch/arm64/boot/dts/arm/vexpress*
 F:	arch/arm/mach-vexpress/
 F:	*/*/vexpress*
 F:	*/*/*/vexpress*
@@ -2404,7 +2406,7 @@ F:	drivers/gpio/gpio-bt8xx.c
 BTRFS FILE SYSTEM
 M:	Chris Mason <clm@fb.com>
 M:	Josef Bacik <jbacik@fb.com>
-M:	David Sterba <dsterba@suse.cz>
+M:	David Sterba <dsterba@suse.com>
 L:	linux-btrfs@vger.kernel.org
 W:	http://btrfs.wiki.kernel.org/
 Q:	http://patchwork.kernel.org/project/linux-btrfs/list/
@@ -2562,19 +2564,31 @@ F:	arch/powerpc/include/uapi/asm/spu*.h
 F:	arch/powerpc/oprofile/*cell*
 F:	arch/powerpc/platforms/cell/
 
-CEPH DISTRIBUTED FILE SYSTEM CLIENT
+CEPH COMMON CODE (LIBCEPH)
+M:	Ilya Dryomov <idryomov@gmail.com>
 M:	"Yan, Zheng" <zyan@redhat.com>
 M:	Sage Weil <sage@redhat.com>
 L:	ceph-devel@vger.kernel.org
 W:	http://ceph.com/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client.git
+T:	git git://github.com/ceph/ceph-client.git
 S:	Supported
-F:	Documentation/filesystems/ceph.txt
-F:	fs/ceph/
 F:	net/ceph/
 F:	include/linux/ceph/
 F:	include/linux/crush/
 
+CEPH DISTRIBUTED FILE SYSTEM CLIENT (CEPH)
+M:	"Yan, Zheng" <zyan@redhat.com>
+M:	Sage Weil <sage@redhat.com>
+M:	Ilya Dryomov <idryomov@gmail.com>
+L:	ceph-devel@vger.kernel.org
+W:	http://ceph.com/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client.git
+T:	git git://github.com/ceph/ceph-client.git
+S:	Supported
+F:	Documentation/filesystems/ceph.txt
+F:	fs/ceph/
+
 CERTIFIED WIRELESS USB (WUSB) SUBSYSTEM:
 L:	linux-usb@vger.kernel.org
 S:	Orphan
@@ -2735,7 +2749,7 @@ COCCINELLE/Semantic Patches (SmPL)
 M:	Julia Lawall <Julia.Lawall@lip6.fr>
 M:	Gilles Muller <Gilles.Muller@lip6.fr>
 M:	Nicolas Palix <nicolas.palix@imag.fr>
-M:	Michal Marek <mmarek@suse.cz>
+M:	Michal Marek <mmarek@suse.com>
 L:	cocci@systeme.lip6.fr (moderated for non-subscribers)
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild.git misc
 W:	http://coccinelle.lip6.fr/
@@ -2851,7 +2865,7 @@ F:	kernel/cpuset.c
 
 CONTROL GROUP - MEMORY RESOURCE CONTROLLER (MEMCG)
 M:	Johannes Weiner <hannes@cmpxchg.org>
-M:	Michal Hocko <mhocko@suse.cz>
+M:	Michal Hocko <mhocko@kernel.org>
 L:	cgroups@vger.kernel.org
 L:	linux-mm@kvack.org
 S:	Maintained
@@ -2932,7 +2946,7 @@ F:	arch/x86/kernel/cpuid.c
 F:	arch/x86/kernel/msr.c
 
 CPU POWER MONITORING SUBSYSTEM
-M:	Thomas Renninger <trenn@suse.de>
+M:	Thomas Renninger <trenn@suse.com>
 L:	linux-pm@vger.kernel.org
 S:	Maintained
 F:	tools/power/cpupower/
@@ -3162,7 +3176,7 @@ F:	Documentation/networking/dmfe.txt
 F:	drivers/net/ethernet/dec/tulip/dmfe.c
 
 DC390/AM53C974 SCSI driver
-M:	Hannes Reinecke <hare@suse.de>
+M:	Hannes Reinecke <hare@suse.com>
 L:	linux-scsi@vger.kernel.org
 S:	Maintained
 F:	drivers/scsi/am53c974.c
@@ -3366,7 +3380,7 @@ W:	http://www.win.tue.nl/~aeb/partitions/partition_types-1.html
 S:	Maintained
 
 DISKQUOTA
-M:	Jan Kara <jack@suse.cz>
+M:	Jan Kara <jack@suse.com>
 S:	Maintained
 F:	Documentation/filesystems/quota.txt
 F:	fs/quota/
@@ -3422,7 +3436,7 @@ F:	Documentation/hwmon/dme1737
 F:	drivers/hwmon/dme1737.c
 
 DMI/SMBIOS SUPPORT
-M:	Jean Delvare <jdelvare@suse.de>
+M:	Jean Delvare <jdelvare@suse.com>
 S:	Maintained
 T:	quilt http://jdelvare.nerim.net/devel/linux/jdelvare-dmi/
 F:	Documentation/ABI/testing/sysfs-firmware-dmi-tables
@@ -4038,7 +4052,7 @@ F:	drivers/of/of_mdio.c
 F:	drivers/of/of_net.c
 
 EXT2 FILE SYSTEM
-M:	Jan Kara <jack@suse.cz>
+M:	Jan Kara <jack@suse.com>
 L:	linux-ext4@vger.kernel.org
 S:	Maintained
 F:	Documentation/filesystems/ext2.txt
@@ -4046,7 +4060,7 @@ F:	fs/ext2/
 F:	include/linux/ext2*
 
 EXT3 FILE SYSTEM
-M:	Jan Kara <jack@suse.cz>
+M:	Jan Kara <jack@suse.com>
 M:	Andrew Morton <akpm@linux-foundation.org>
 M:	Andreas Dilger <adilger.kernel@dilger.ca>
 L:	linux-ext4@vger.kernel.org
@@ -4096,7 +4110,7 @@ F:	drivers/video/fbdev/exynos/exynos_mipi*
 F:	include/video/exynos_mipi*
 
 F71805F HARDWARE MONITORING DRIVER
-M:	Jean Delvare <jdelvare@suse.de>
+M:	Jean Delvare <jdelvare@suse.com>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	Documentation/hwmon/f71805f
@@ -4231,7 +4245,7 @@ S:	Maintained
 F:	drivers/block/rsxx/
 
 FLOPPY DRIVER
-M:	Jiri Kosina <jkosina@suse.cz>
+M:	Jiri Kosina <jkosina@suse.com>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/floppy.git
 S:	Odd fixes
 F:	drivers/block/floppy.c
@@ -4652,7 +4666,7 @@ F:	drivers/media/usb/stk1160/
 
 H8/300 ARCHITECTURE
 M:	Yoshinori Sato <ysato@users.sourceforge.jp>
-L:	uclinux-h8-devel@lists.sourceforge.jp
+L:	uclinux-h8-devel@lists.sourceforge.jp (moderated for non-subscribers)
 W:	http://uclinux-h8.sourceforge.jp
 T:	git git://git.sourceforge.jp/gitroot/uclinux-h8/linux.git
 S:	Maintained
@@ -4699,7 +4713,7 @@ S:	Maintained
 F:	drivers/media/usb/hackrf/
 
 HARDWARE MONITORING
-M:	Jean Delvare <jdelvare@suse.de>
+M:	Jean Delvare <jdelvare@suse.com>
 M:	Guenter Roeck <linux@roeck-us.net>
 L:	lm-sensors@lm-sensors.org
 W:	http://www.lm-sensors.org/
@@ -4802,7 +4816,7 @@ F:	include/linux/pm.h
 F:	arch/*/include/asm/suspend*.h
 
 HID CORE LAYER
-M:	Jiri Kosina <jkosina@suse.cz>
+M:	Jiri Kosina <jkosina@suse.com>
 L:	linux-input@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid.git
 S:	Maintained
@@ -4811,7 +4825,7 @@ F:	include/linux/hid*
 F:	include/uapi/linux/hid*
 
 HID SENSOR HUB DRIVERS
-M:	Jiri Kosina <jkosina@suse.cz>
+M:	Jiri Kosina <jkosina@suse.com>
 M:	Jonathan Cameron <jic23@kernel.org>
 M:	Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
 L:	linux-input@vger.kernel.org
@@ -4945,7 +4959,7 @@ F:	include/linux/hyperv.h
 F:	tools/hv/
 
 I2C OVER PARALLEL PORT
-M:	Jean Delvare <jdelvare@suse.de>
+M:	Jean Delvare <jdelvare@suse.com>
 L:	linux-i2c@vger.kernel.org
 S:	Maintained
 F:	Documentation/i2c/busses/i2c-parport
@@ -4954,7 +4968,7 @@ F:	drivers/i2c/busses/i2c-parport.c
 F:	drivers/i2c/busses/i2c-parport-light.c
 
 I2C/SMBUS CONTROLLER DRIVERS FOR PC
-M:	Jean Delvare <jdelvare@suse.de>
+M:	Jean Delvare <jdelvare@suse.com>
 L:	linux-i2c@vger.kernel.org
 S:	Maintained
 F:	Documentation/i2c/busses/i2c-ali1535
@@ -4995,7 +5009,7 @@ F:	drivers/i2c/busses/i2c-ismt.c
 F:	Documentation/i2c/busses/i2c-ismt
 
 I2C/SMBUS STUB DRIVER
-M:	Jean Delvare <jdelvare@suse.de>
+M:	Jean Delvare <jdelvare@suse.com>
 L:	linux-i2c@vger.kernel.org
 S:	Maintained
 F:	drivers/i2c/i2c-stub.c
@@ -5022,7 +5036,7 @@ L:	linux-acpi@vger.kernel.org
 S:	Maintained
 
 I2C-TAOS-EVM DRIVER
-M:	Jean Delvare <jdelvare@suse.de>
+M:	Jean Delvare <jdelvare@suse.com>
 L:	linux-i2c@vger.kernel.org
 S:	Maintained
 F:	Documentation/i2c/busses/i2c-taos-evm
@@ -5551,8 +5565,8 @@ F:	include/uapi/linux/ip_vs.h
 F:	net/netfilter/ipvs/
 
 IPWIRELESS DRIVER
-M:	Jiri Kosina <jkosina@suse.cz>
-M:	David Sterba <dsterba@suse.cz>
+M:	Jiri Kosina <jkosina@suse.com>
+M:	David Sterba <dsterba@suse.com>
 S:	Odd Fixes
 F:	drivers/tty/ipwireless/
 
@@ -5672,7 +5686,7 @@ S:	Maintained
 F:	drivers/isdn/hardware/eicon/
 
 IT87 HARDWARE MONITORING DRIVER
-M:	Jean Delvare <jdelvare@suse.de>
+M:	Jean Delvare <jdelvare@suse.com>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	Documentation/hwmon/it87
@@ -5739,7 +5753,7 @@ F:	include/uapi/linux/jffs2.h
 
 JOURNALLING LAYER FOR BLOCK DEVICES (JBD)
 M:	Andrew Morton <akpm@linux-foundation.org>
-M:	Jan Kara <jack@suse.cz>
+M:	Jan Kara <jack@suse.com>
 L:	linux-ext4@vger.kernel.org
 S:	Maintained
 F:	fs/jbd/
@@ -5803,7 +5817,7 @@ S:	Maintained
 F:	fs/autofs4/
 
 KERNEL BUILD + files below scripts/ (unless maintained elsewhere)
-M:	Michal Marek <mmarek@suse.cz>
+M:	Michal Marek <mmarek@suse.com>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild.git for-next
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild.git rc-fixes
 L:	linux-kbuild@vger.kernel.org
@@ -5867,7 +5881,7 @@ F:	arch/x86/include/asm/svm.h
 F:	arch/x86/kvm/svm.c
 
 KERNEL VIRTUAL MACHINE (KVM) FOR POWERPC
-M:	Alexander Graf <agraf@suse.de>
+M:	Alexander Graf <agraf@suse.com>
 L:	kvm-ppc@vger.kernel.org
 W:	http://kvm.qumranet.com
 T:	git git://github.com/agraf/linux-2.6.git
@@ -6024,7 +6038,7 @@ F:	drivers/leds/
 F:	include/linux/leds.h
 
 LEGACY EEPROM DRIVER
-M:	Jean Delvare <jdelvare@suse.de>
+M:	Jean Delvare <jdelvare@suse.com>
 S:	Maintained
 F:	Documentation/misc-devices/eeprom
 F:	drivers/misc/eeprom/eeprom.c
@@ -6077,7 +6091,7 @@ F:	include/linux/ata.h
 F:	include/linux/libata.h
 
 LIBATA PATA ARASAN COMPACT FLASH CONTROLLER
-M:	Viresh Kumar <viresh.linux@gmail.com>
+M:	Viresh Kumar <vireshk@kernel.org>
 L:	linux-ide@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata.git
 S:	Maintained
@@ -6147,6 +6161,7 @@ L:	linux-nvdimm@lists.01.org
 Q:	https://patchwork.kernel.org/project/linux-nvdimm/list/
 S:	Supported
 F:	drivers/nvdimm/pmem.c
+F:	include/linux/pmem.h
 
 LINUX FOR IBM pSERIES (RS/6000)
 M:	Paul Mackerras <paulus@au.ibm.com>
@@ -6161,7 +6176,7 @@ M:	Michael Ellerman <mpe@ellerman.id.au>
 W:	http://www.penguinppc.org/
 L:	linuxppc-dev@lists.ozlabs.org
 Q:	http://patchwork.ozlabs.org/project/linuxppc-dev/list/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux.git
 S:	Supported
 F:	Documentation/powerpc/
 F:	arch/powerpc/
@@ -6237,8 +6252,8 @@ F:	drivers/platform/x86/hp_accel.c
 LIVE PATCHING
 M:	Josh Poimboeuf <jpoimboe@redhat.com>
 M:	Seth Jennings <sjenning@redhat.com>
-M:	Jiri Kosina <jkosina@suse.cz>
-M:	Vojtech Pavlik <vojtech@suse.cz>
+M:	Jiri Kosina <jkosina@suse.com>
+M:	Vojtech Pavlik <vojtech@suse.com>
 S:	Maintained
 F:	kernel/livepatch/
 F:	include/linux/livepatch.h
@@ -6264,21 +6279,21 @@ S:	Maintained
 F:	drivers/hwmon/lm73.c
 
 LM78 HARDWARE MONITOR DRIVER
-M:	Jean Delvare <jdelvare@suse.de>
+M:	Jean Delvare <jdelvare@suse.com>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	Documentation/hwmon/lm78
 F:	drivers/hwmon/lm78.c
 
 LM83 HARDWARE MONITOR DRIVER
-M:	Jean Delvare <jdelvare@suse.de>
+M:	Jean Delvare <jdelvare@suse.com>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	Documentation/hwmon/lm83
 F:	drivers/hwmon/lm83.c
 
 LM90 HARDWARE MONITOR DRIVER
-M:	Jean Delvare <jdelvare@suse.de>
+M:	Jean Delvare <jdelvare@suse.com>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	Documentation/hwmon/lm90
@@ -7005,6 +7020,7 @@ F:	include/uapi/linux/netfilter/
 F:	net/*/netfilter.c
 F:	net/*/netfilter/
 F:	net/netfilter/
+F:	net/bridge/br_netfilter*.c
 
 NETLABEL
 M:	Paul Moore <paul@paul-moore.com>
@@ -7704,7 +7720,7 @@ S:	Maintained
 F:	drivers/char/pc8736x_gpio.c
 
 PC87427 HARDWARE MONITORING DRIVER
-M:	Jean Delvare <jdelvare@suse.de>
+M:	Jean Delvare <jdelvare@suse.com>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	Documentation/hwmon/pc87427
@@ -7981,7 +7997,7 @@ S:	Maintained
 F:	drivers/pinctrl/samsung/
 
 PIN CONTROLLER - ST SPEAR
-M:	Viresh Kumar <viresh.linux@gmail.com>
+M:	Viresh Kumar <vireshk@kernel.org>
 L:	spear-devel@list.st.com
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 W:	http://www.st.com/spear
@@ -7989,7 +8005,7 @@ S:	Maintained
 F:	drivers/pinctrl/spear/
 
 PKTCDVD DRIVER
-M:	Jiri Kosina <jkosina@suse.cz>
+M:	Jiri Kosina <jkosina@suse.com>
 S:	Maintained
 F:	drivers/block/pktcdvd.c
 F:	include/linux/pktcdvd.h
@@ -8366,10 +8382,12 @@ RADOS BLOCK DEVICE (RBD)
 M:	Ilya Dryomov <idryomov@gmail.com>
 M:	Sage Weil <sage@redhat.com>
 M:	Alex Elder <elder@kernel.org>
-M:	ceph-devel@vger.kernel.org
+L:	ceph-devel@vger.kernel.org
 W:	http://ceph.com/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client.git
+T:	git git://github.com/ceph/ceph-client.git
 S:	Supported
+F:	Documentation/ABI/testing/sysfs-bus-rbd
 F:	drivers/block/rbd.c
 F:	drivers/block/rbd_types.h
 
@@ -8878,7 +8896,7 @@ S:	Maintained
 F:	drivers/tty/serial/
 
 SYNOPSYS DESIGNWARE DMAC DRIVER
-M:	Viresh Kumar <viresh.linux@gmail.com>
+M:	Viresh Kumar <vireshk@kernel.org>
 M:	Andy Shevchenko <andriy.shevchenko@linux.intel.com>
 S:	Maintained
 F:	include/linux/dma/dw.h
@@ -9045,7 +9063,7 @@ S:	Maintained
 F:	drivers/mmc/host/sdhci-s3c*
 
 SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) ST SPEAR DRIVER
-M:	Viresh Kumar <viresh.linux@gmail.com>
+M:	Viresh Kumar <vireshk@kernel.org>
 L:	spear-devel@list.st.com
 L:	linux-mmc@vger.kernel.org
 S:	Maintained
@@ -9407,7 +9425,7 @@ F:	Documentation/hwmon/sch5627
 F:	drivers/hwmon/sch5627.c
 
 SMSC47B397 HARDWARE MONITOR DRIVER
-M:	Jean Delvare <jdelvare@suse.de>
+M:	Jean Delvare <jdelvare@suse.com>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	Documentation/hwmon/smsc47b397
@@ -9456,7 +9474,7 @@ S:	Supported
 F:	drivers/media/pci/solo6x10/
 
 SOFTWARE RAID (Multiple Disks) SUPPORT
-M:	Neil Brown <neilb@suse.de>
+M:	Neil Brown <neilb@suse.com>
 L:	linux-raid@vger.kernel.org
 S:	Supported
 F:	drivers/md/
@@ -9499,7 +9517,7 @@ F:	drivers/memstick/core/ms_block.*
 
 SOUND
 M:	Jaroslav Kysela <perex@perex.cz>
-M:	Takashi Iwai <tiwai@suse.de>
+M:	Takashi Iwai <tiwai@suse.com>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 W:	http://www.alsa-project.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound.git
@@ -9583,7 +9601,7 @@ S:	Maintained
 F:	include/linux/compiler.h
 
 SPEAR PLATFORM SUPPORT
-M:	Viresh Kumar <viresh.linux@gmail.com>
+M:	Viresh Kumar <vireshk@kernel.org>
 M:	Shiraz Hashim <shiraz.linux.kernel@gmail.com>
 L:	spear-devel@list.st.com
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -9592,7 +9610,7 @@ S:	Maintained
 F:	arch/arm/mach-spear/
 
 SPEAR CLOCK FRAMEWORK SUPPORT
-M:	Viresh Kumar <viresh.linux@gmail.com>
+M:	Viresh Kumar <vireshk@kernel.org>
 L:	spear-devel@list.st.com
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 W:	http://www.st.com/spear
@@ -10382,7 +10400,7 @@ K:	^Subject:.*(?i)trivial
 
 TTY LAYER
 M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-M:	Jiri Slaby <jslaby@suse.cz>
+M:	Jiri Slaby <jslaby@suse.com>
 S:	Supported
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git
 F:	Documentation/serial/
@@ -10456,7 +10474,7 @@ F:	arch/m68k/*/*_no.*
 F:	arch/m68k/include/asm/*_no.*
 
 UDF FILESYSTEM
-M:	Jan Kara <jack@suse.cz>
+M:	Jan Kara <jack@suse.com>
 S:	Maintained
 F:	Documentation/filesystems/udf.txt
 F:	fs/udf/
@@ -10599,7 +10617,7 @@ F:	drivers/usb/gadget/
 F:	include/linux/usb/gadget*
 
 USB HID/HIDBP DRIVERS (USB KEYBOARDS, MICE, REMOTE CONTROLS, ...)
-M:	Jiri Kosina <jkosina@suse.cz>
+M:	Jiri Kosina <jkosina@suse.com>
 L:	linux-usb@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid.git
 S:	Maintained
@@ -10724,7 +10742,7 @@ S:	Maintained
 F:	drivers/usb/host/uhci*
 
 USB "USBNET" DRIVER FRAMEWORK
-M:	Oliver Neukum <oneukum@suse.de>
+M:	Oliver Neukum <oneukum@suse.com>
 L:	netdev@vger.kernel.org
 W:	http://www.linux-usb.org/usbnet
 S:	Maintained
@@ -11051,7 +11069,7 @@ F:	Documentation/hwmon/w83793
 F:	drivers/hwmon/w83793.c
 
 W83795 HARDWARE MONITORING DRIVER
-M:	Jean Delvare <jdelvare@suse.de>
+M:	Jean Delvare <jdelvare@suse.com>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	drivers/hwmon/w83795.c

Makefile

@@ -1,7 +1,7 @@
 VERSION = 4
 PATCHLEVEL = 2
 SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc3
 NAME = Hurr durr I'ma sheep
 
 # *DOCUMENTATION*
@@ -780,10 +780,11 @@ endif
 include scripts/Makefile.kasan
 include scripts/Makefile.extrawarn
 
-# Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments
-KBUILD_CPPFLAGS += $(KCPPFLAGS)
-KBUILD_AFLAGS += $(KAFLAGS)
-KBUILD_CFLAGS += $(KCFLAGS)
+# Add any arch overrides and user supplied CPPFLAGS, AFLAGS and CFLAGS as the
+# last assignments
+KBUILD_CPPFLAGS += $(ARCH_CPPFLAGS) $(KCPPFLAGS)
+KBUILD_AFLAGS   += $(ARCH_AFLAGS)   $(KAFLAGS)
+KBUILD_CFLAGS   += $(ARCH_CFLAGS)   $(KCFLAGS)
 
 # Use --build-id when available.
 LDFLAGS_BUILD_ID = $(patsubst -Wl$(comma)%,%,\

arch/Kconfig

@@ -221,6 +221,10 @@ config ARCH_TASK_STRUCT_ALLOCATOR
 config ARCH_THREAD_INFO_ALLOCATOR
 	bool
 
+# Select if arch wants to size task_struct dynamically via arch_task_struct_size:
+config ARCH_WANTS_DYNAMIC_TASK_STRUCT
+	bool
+
 config HAVE_REGS_AND_STACK_ACCESS_API
 	bool
 	help

arch/alpha/include/asm/Kbuild

@@ -5,6 +5,7 @@ generic-y += cputime.h
 generic-y += exec.h
 generic-y += irq_work.h
 generic-y += mcs_spinlock.h
+generic-y += mm-arch-hooks.h
 generic-y += preempt.h
 generic-y += sections.h
 generic-y += trace_clock.h

arch/alpha/include/asm/mm-arch-hooks.h

@@ -1,15 +0,0 @@
-/*
- * Architecture specific mm hooks
- *
- * Copyright (C) 2015, IBM Corporation
- * Author: Laurent Dufour <ldufour@linux.vnet.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _ASM_ALPHA_MM_ARCH_HOOKS_H
-#define _ASM_ALPHA_MM_ARCH_HOOKS_H
-
-#endif /* _ASM_ALPHA_MM_ARCH_HOOKS_H */

arch/arc/Kconfig

@@ -115,6 +115,7 @@ if ISA_ARCOMPACT
 
 config ARC_CPU_750D
 	bool "ARC750D"
+	select ARC_CANT_LLSC
 	help
 	  Support for ARC750 core
 
@@ -362,7 +363,7 @@ config ARC_CANT_LLSC
 config ARC_HAS_LLSC
 	bool "Insn: LLOCK/SCOND (efficient atomic ops)"
 	default y
-	depends on !ARC_CPU_750D && !ARC_CANT_LLSC
+	depends on !ARC_CANT_LLSC
 
 config ARC_HAS_SWAPE
 	bool "Insn: SWAPE (endian-swap)"

arch/arc/Makefile

@@ -49,7 +49,8 @@ endif
 
 ifndef CONFIG_CC_OPTIMIZE_FOR_SIZE
 # Generic build system uses -O2, we want -O3
-cflags-y  += -O3
+# Note: No need to add to cflags-y as that happens anyways
+ARCH_CFLAGS += -O3
 endif
 
 # small data is default for elf32 tool-chain. If not usable, disable it

arch/arc/boot/dts/axc003.dtsi

@@ -12,7 +12,7 @@
 
 / {
 	compatible = "snps,arc";
-	clock-frequency = <75000000>;
+	clock-frequency = <90000000>;
 	#address-cells = <1>;
 	#size-cells = <1>;
 

arch/arc/boot/dts/axc003_idu.dtsi

@@ -12,7 +12,7 @@
 
 / {
 	compatible = "snps,arc";
-	clock-frequency = <75000000>;
+	clock-frequency = <90000000>;
 	#address-cells = <1>;
 	#size-cells = <1>;
 

arch/arc/include/asm/Kbuild

@@ -22,6 +22,7 @@ generic-y += kvm_para.h
 generic-y += local.h
 generic-y += local64.h
 generic-y += mcs_spinlock.h
+generic-y += mm-arch-hooks.h
 generic-y += mman.h
 generic-y += msgbuf.h
 generic-y += param.h

arch/arc/include/asm/bitops.h

@@ -50,8 +50,7 @@ static inline void op##_bit(unsigned long nr, volatile unsigned long *m)\
 	 * done for const @nr, but no code is generated due to gcc	\
 	 * const prop.							\
 	 */								\
-	if (__builtin_constant_p(nr))					\
-		nr &= 0x1f;						\
+	nr &= 0x1f;							\
 									\
 	__asm__ __volatile__(						\
 	"1:	llock       %0, [%1]		\n"			\
@@ -82,8 +81,7 @@ static inline int test_and_##op##_bit(unsigned long nr, volatile unsigned long *
 									\
 	m += nr >> 5;							\
 									\
-	if (__builtin_constant_p(nr))					\
-		nr &= 0x1f;						\
+	nr &= 0x1f;							\
 									\
 	/*								\
 	 * Explicit full memory barrier needed before/after as		\
@@ -129,16 +127,13 @@ static inline void op##_bit(unsigned long nr, volatile unsigned long *m)\
 	unsigned long temp, flags;					\
 	m += nr >> 5;							\
 									\
-	if (__builtin_constant_p(nr))					\
-		nr &= 0x1f;						\
-									\
 	/*								\
 	 * spin lock/unlock provide the needed smp_mb() before/after	\
 	 */								\
 	bitops_lock(flags);						\
 									\
 	temp = *m;							\
-	*m = temp c_op (1UL << nr);					\
+	*m = temp c_op (1UL << (nr & 0x1f));					\
 									\
 	bitops_unlock(flags);						\
 }
@@ -149,17 +144,14 @@ static inline int test_and_##op##_bit(unsigned long nr, volatile unsigned long *
 	unsigned long old, flags;					\
 	m += nr >> 5;							\
 									\
-	if (__builtin_constant_p(nr))					\
-		nr &= 0x1f;						\
-									\
 	bitops_lock(flags);						\
 									\
 	old = *m;							\
-	*m = old c_op (1 << nr);					\
+	*m = old c_op (1UL << (nr & 0x1f));				\
 									\
 	bitops_unlock(flags);						\
 									\
-	return (old & (1 << nr)) != 0;					\
+	return (old & (1UL << (nr & 0x1f))) != 0;			\
 }
 
 #endif /* CONFIG_ARC_HAS_LLSC */
@@ -174,11 +166,8 @@ static inline void __##op##_bit(unsigned long nr, volatile unsigned long *m)	\
 	unsigned long temp;						\
 	m += nr >> 5;							\
 									\
-	if (__builtin_constant_p(nr))					\
-		nr &= 0x1f;						\
-									\
 	temp = *m;							\
-	*m = temp c_op (1UL << nr);					\
+	*m = temp c_op (1UL << (nr & 0x1f));				\
 }
 
 #define __TEST_N_BIT_OP(op, c_op, asm_op)				\
@@ -187,13 +176,10 @@ static inline int __test_and_##op##_bit(unsigned long nr, volatile unsigned long
 	unsigned long old;						\
 	m += nr >> 5;							\
 									\
-	if (__builtin_constant_p(nr))					\
-		nr &= 0x1f;						\
-									\
 	old = *m;							\
-	*m = old c_op (1 << nr);					\
+	*m = old c_op (1UL << (nr & 0x1f));				\
 									\
-	return (old & (1 << nr)) != 0;					\
+	return (old & (1UL << (nr & 0x1f))) != 0;			\
 }
 
 #define BIT_OPS(op, c_op, asm_op)					\
@@ -224,10 +210,7 @@ test_bit(unsigned int nr, const volatile unsigned long *addr)
 
 	addr += nr >> 5;
 
-	if (__builtin_constant_p(nr))
-		nr &= 0x1f;
-
-	mask = 1 << nr;
+	mask = 1UL << (nr & 0x1f);
 
 	return ((mask & *addr) != 0);
 }

arch/arc/include/asm/futex.h

@@ -16,12 +16,40 @@
 #include <linux/uaccess.h>
 #include <asm/errno.h>
 
+#ifdef CONFIG_ARC_HAS_LLSC
+
+#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg)\
+							\
+	__asm__ __volatile__(				\
+	"1:	llock	%1, [%2]		\n"	\
+		insn				"\n"	\
+	"2:	scond	%0, [%2]		\n"	\
+	"	bnz	1b			\n"	\
+	"	mov %0, 0			\n"	\
+	"3:					\n"	\
+	"	.section .fixup,\"ax\"		\n"	\
+	"	.align  4			\n"	\
+	"4:	mov %0, %4			\n"	\
+	"	b   3b				\n"	\
+	"	.previous			\n"	\
+	"	.section __ex_table,\"a\"	\n"	\
+	"	.align  4			\n"	\
+	"	.word   1b, 4b			\n"	\
+	"	.word   2b, 4b			\n"	\
+	"	.previous			\n"	\
+							\
+	: "=&r" (ret), "=&r" (oldval)			\
+	: "r" (uaddr), "r" (oparg), "ir" (-EFAULT)	\
+	: "cc", "memory")
+
+#else	/* !CONFIG_ARC_HAS_LLSC */
+
 #define __futex_atomic_op(insn, ret, oldval, uaddr, oparg)\
 							\
 	__asm__ __volatile__(				\
-	"1:	ld  %1, [%2]			\n"	\
+	"1:	ld	%1, [%2]		\n"	\
 		insn				"\n"	\
-	"2:	st  %0, [%2]			\n"	\
+	"2:	st	%0, [%2]		\n"	\
 	"	mov %0, 0			\n"	\
 	"3:					\n"	\
 	"	.section .fixup,\"ax\"		\n"	\
@@ -39,6 +67,8 @@
 	: "r" (uaddr), "r" (oparg), "ir" (-EFAULT)	\
 	: "cc", "memory")
 
+#endif
+
 static inline int futex_atomic_op_inuser(int encoded_op, u32 __user *uaddr)
 {
 	int op = (encoded_op >> 28) & 7;
@@ -123,11 +153,17 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, u32 oldval,
 
 	pagefault_disable();
 
-	/* TBD : can use llock/scond */
 	__asm__ __volatile__(
-	"1:	ld    %0, [%3]	\n"
-	"	brne  %0, %1, 3f	\n"
-	"2:	st    %2, [%3]	\n"
+#ifdef CONFIG_ARC_HAS_LLSC
+	"1:	llock	%0, [%3]		\n"
+	"	brne	%0, %1, 3f		\n"
+	"2:	scond	%2, [%3]		\n"
+	"	bnz	1b			\n"
+#else
+	"1:	ld	%0, [%3]		\n"
+	"	brne	%0, %1, 3f		\n"
+	"2:	st	%2, [%3]		\n"
+#endif
 	"3:	\n"
 	"	.section .fixup,\"ax\"	\n"
 	"4:	mov %0, %4	\n"

arch/arc/include/asm/mm-arch-hooks.h

@@ -1,15 +0,0 @@
-/*
- * Architecture specific mm hooks
- *
- * Copyright (C) 2015, IBM Corporation
- * Author: Laurent Dufour <ldufour@linux.vnet.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _ASM_ARC_MM_ARCH_HOOKS_H
-#define _ASM_ARC_MM_ARCH_HOOKS_H
-
-#endif /* _ASM_ARC_MM_ARCH_HOOKS_H */

arch/arc/include/asm/ptrace.h

@@ -106,7 +106,7 @@ struct callee_regs {
 	long r25, r24, r23, r22, r21, r20, r19, r18, r17, r16, r15, r14, r13;
 };
 
-#define instruction_pointer(regs)	((regs)->ret)
+#define instruction_pointer(regs)	(unsigned long)((regs)->ret)
 #define profile_pc(regs)		instruction_pointer(regs)
 
 /* return 1 if user mode or 0 if kernel mode */

arch/arc/kernel/intc-arcv2.c

@@ -12,7 +12,6 @@
 #include <linux/of.h>
 #include <linux/irqdomain.h>
 #include <linux/irqchip.h>
-#include "../../drivers/irqchip/irqchip.h"
 #include <asm/irq.h>
 
 /*

arch/arc/kernel/intc-compact.c

@@ -12,7 +12,6 @@
 #include <linux/of.h>
 #include <linux/irqdomain.h>
 #include <linux/irqchip.h>
-#include "../../drivers/irqchip/irqchip.h"
 #include <asm/irq.h>
 
 /*

arch/arc/kernel/mcip.c

@@ -175,7 +175,6 @@ void mcip_init_early_smp(void)
 #include <linux/irqchip.h>
 #include <linux/of.h>
 #include <linux/of_irq.h>
-#include "../../drivers/irqchip/irqchip.h"
 
 /*
  * Set the DEST for @cmn_irq to @cpu_mask (1 bit per core)
@@ -218,11 +217,28 @@ static void idu_irq_unmask(struct irq_data *data)
 	raw_spin_unlock_irqrestore(&mcip_lock, flags);
 }
 
+#ifdef CONFIG_SMP
 static int
-idu_irq_set_affinity(struct irq_data *d, const struct cpumask *cpumask, bool f)
+idu_irq_set_affinity(struct irq_data *data, const struct cpumask *cpumask,
+		     bool force)
 {
+	unsigned long flags;
+	cpumask_t online;
+
+	/* errout if no online cpu per @cpumask */
+	if (!cpumask_and(&online, cpumask, cpu_online_mask))
+		return -EINVAL;
+
+	raw_spin_lock_irqsave(&mcip_lock, flags);
+
+	idu_set_dest(data->hwirq, cpumask_bits(&online)[0]);
+	idu_set_mode(data->hwirq, IDU_M_TRIG_LEVEL, IDU_M_DISTRI_RR);
+
+	raw_spin_unlock_irqrestore(&mcip_lock, flags);
+
 	return IRQ_SET_MASK_OK;
 }
+#endif
 
 static struct irq_chip idu_irq_chip = {
 	.name			= "MCIP IDU Intc",
@@ -330,8 +346,7 @@ idu_of_init(struct device_node *intc, struct device_node *parent)
 		if (!i)
 			idu_first_irq = irq;
 
-		irq_set_handler_data(irq, domain);
-		irq_set_chained_handler(irq, idu_cascade_isr);
+		irq_set_chained_handler_and_data(irq, idu_cascade_isr, domain);
 	}
 
 	__mcip_cmd(CMD_IDU_ENABLE, 0);

arch/arc/kernel/setup.c

@@ -142,17 +142,22 @@ static void read_arc_build_cfg_regs(void)
 }
 
 static const struct cpuinfo_data arc_cpu_tbl[] = {
+#ifdef CONFIG_ISA_ARCOMPACT
 	{ {0x20, "ARC 600"      }, 0x2F},
 	{ {0x30, "ARC 700"      }, 0x33},
 	{ {0x34, "ARC 700 R4.10"}, 0x34},
 	{ {0x35, "ARC 700 R4.11"}, 0x35},
-	{ {0x50, "ARC HS38"	}, 0x51},
+#else
+	{ {0x50, "ARC HS38 R2.0"}, 0x51},
+	{ {0x52, "ARC HS38 R2.1"}, 0x52},
+#endif
 	{ {0x00, NULL		} }
 };
 
-#define IS_AVAIL1(v, str)	((v) ? str : "")
-#define IS_USED(cfg)		(IS_ENABLED(cfg) ? "" : "(not used) ")
-#define IS_AVAIL2(v, str, cfg)  IS_AVAIL1(v, str), IS_AVAIL1(v, IS_USED(cfg))
+#define IS_AVAIL1(v, s)		((v) ? s : "")
+#define IS_USED_RUN(v)		((v) ? "" : "(not used) ")
+#define IS_USED_CFG(cfg)	IS_USED_RUN(IS_ENABLED(cfg))
+#define IS_AVAIL2(v, s, cfg)	IS_AVAIL1(v, s), IS_AVAIL1(v, IS_USED_CFG(cfg))
 
 static char *arc_cpu_mumbojumbo(int cpu_id, char *buf, int len)
 {
@@ -226,7 +231,7 @@ static char *arc_cpu_mumbojumbo(int cpu_id, char *buf, int len)
 			n += scnprintf(buf + n, len - n, "mpy[opt %d] ", opt);
 		}
 		n += scnprintf(buf + n, len - n, "%s",
-			       IS_USED(CONFIG_ARC_HAS_HW_MPY));
+			       IS_USED_CFG(CONFIG_ARC_HAS_HW_MPY));
 	}
 
 	n += scnprintf(buf + n, len - n, "%s%s%s%s%s%s%s%s\n",

arch/arc/kernel/troubleshoot.c

@@ -58,7 +58,6 @@ static void show_callee_regs(struct callee_regs *cregs)
 
 static void print_task_path_n_nm(struct task_struct *tsk, char *buf)
 {
-	struct path path;
 	char *path_nm = NULL;
 	struct mm_struct *mm;
 	struct file *exe_file;

arch/arc/mm/cache.c

@@ -468,10 +468,18 @@ static void __ic_line_inv_vaddr(unsigned long paddr, unsigned long vaddr,
 noinline void slc_op(unsigned long paddr, unsigned long sz, const int op)
 {
 #ifdef CONFIG_ISA_ARCV2
+	/*
+	 * SLC is shared between all cores and concurrent aux operations from
+	 * multiple cores need to be serialized using a spinlock
+	 * A concurrent operation can be silently ignored and/or the old/new
+	 * operation can remain incomplete forever (lockup in SLC_CTRL_BUSY loop
+	 * below)
+	 */
+	static DEFINE_SPINLOCK(lock);
 	unsigned long flags;
 	unsigned int ctrl;
 
-	local_irq_save(flags);
+	spin_lock_irqsave(&lock, flags);
 
 	/*
 	 * The Region Flush operation is specified by CTRL.RGN_OP[11..9]
@@ -504,7 +512,7 @@ noinline void slc_op(unsigned long paddr, unsigned long sz, const int op)
 
 	while (read_aux_reg(ARC_REG_SLC_CTRL) & SLC_CTRL_BUSY);
 
-	local_irq_restore(flags);
+	spin_unlock_irqrestore(&lock, flags);
 #endif
 }
 

arch/arc/mm/dma.c

@@ -60,8 +60,8 @@ void *dma_alloc_coherent(struct device *dev, size_t size,
 
 	/* This is kernel Virtual address (0x7000_0000 based) */
 	kvaddr = ioremap_nocache((unsigned long)paddr, size);
-	if (kvaddr != NULL)
-		memset(kvaddr, 0, size);
+	if (kvaddr == NULL)
+		return NULL;
 
 	/* This is bus address, platform dependent */
 	*dma_handle = (dma_addr_t)paddr;

arch/arm/Kconfig

@@ -1693,6 +1693,12 @@ config HIGHMEM
 config HIGHPTE
 	bool "Allocate 2nd-level pagetables from highmem"
 	depends on HIGHMEM
+	help
+	  The VM uses one page of physical memory for each page table.
+	  For systems with a lot of processes, this can use a lot of
+	  precious low memory, eventually leading to low memory being
+	  consumed by page tables.  Setting this option will allow
+	  user-space 2nd level page tables to reside in high memory.
 
 config HW_PERF_EVENTS
 	bool "Enable hardware performance counter support for perf events"

arch/arm/Kconfig.debug

@@ -1635,7 +1635,7 @@ config PID_IN_CONTEXTIDR
 
 config DEBUG_SET_MODULE_RONX
 	bool "Set loadable kernel module data as NX and text as RO"
-	depends on MODULES
+	depends on MODULES && MMU
 	---help---
 	  This option helps catch unintended modifications to loadable
 	  kernel module's text and read-only data. It also prevents execution

arch/arm/boot/dts/am335x-boneblack.dts

@@ -80,3 +80,7 @@
 		status = "okay";
 	};
 };
+
+&rtc {
+	system-power-controller;
+};

arch/arm/boot/dts/am335x-pepper.dts

@@ -74,6 +74,7 @@
 	audio_codec: tlv320aic3106@1b {
 		compatible = "ti,tlv320aic3106";
 		reg = <0x1b>;
+		ai3x-micbias-vg = <0x2>;
 	};
 
 	accel: lis331dlh@1d {
@@ -153,7 +154,7 @@
 	ti,audio-routing =
 		"Headphone Jack",	"HPLOUT",
 		"Headphone Jack",	"HPROUT",
-		"LINE1L",		"Line In";
+		"MIC3L",		"Mic3L Switch";
 };
 
 &mcasp0 {
@@ -438,41 +439,50 @@
 	regulators {
 		dcdc1_reg: regulator@0 {
 			/* VDD_1V8 system supply */
+			regulator-always-on;
 		};
 
 		dcdc2_reg: regulator@1 {
 			/* VDD_CORE voltage limits 0.95V - 1.26V with +/-4% tolerance */
 			regulator-name = "vdd_core";
 			regulator-min-microvolt = <925000>;
-			regulator-max-microvolt = <1325000>;
+			regulator-max-microvolt = <1150000>;
 			regulator-boot-on;
+			regulator-always-on;
 		};
 
 		dcdc3_reg: regulator@2 {
 			/* VDD_MPU voltage limits 0.95V - 1.1V with +/-4% tolerance */
 			regulator-name = "vdd_mpu";
 			regulator-min-microvolt = <925000>;
-			regulator-max-microvolt = <1150000>;
+			regulator-max-microvolt = <1325000>;
 			regulator-boot-on;
+			regulator-always-on;
 		};
 
 		ldo1_reg: regulator@3 {
 			/* VRTC 1.8V always-on supply */
+			regulator-name = "vrtc,vdds";
 			regulator-always-on;
 		};
 
 		ldo2_reg: regulator@4 {
 			/* 3.3V rail */
+			regulator-name = "vdd_3v3aux";
+			regulator-always-on;
 		};
 
 		ldo3_reg: regulator@5 {
 			/* VDD_3V3A 3.3V rail */
+			regulator-name = "vdd_3v3a";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
 		};
 
 		ldo4_reg: regulator@6 {
 			/* VDD_3V3B 3.3V rail */
+			regulator-name = "vdd_3v3b";
+			regulator-always-on;
 		};
 	};
 };

arch/arm/boot/dts/am4372.dtsi

@@ -132,6 +132,12 @@
 			};
 		};
 
+		emif: emif@4c000000 {
+			compatible = "ti,emif-am4372";
+			reg = <0x4c000000 0x1000000>;
+			ti,hwmods = "emif";
+		};
+
 		edma: edma@49000000 {
 			compatible = "ti,edma3";
 			ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
@@ -941,6 +947,7 @@
 				ti,hwmods = "dss_rfbi";
 				clocks = <&disp_clk>;
 				clock-names = "fck";
+				status = "disabled";
 			};
 		};
 

arch/arm/boot/dts/am57xx-beagle-x15.dts

@@ -605,6 +605,10 @@
 	phy-supply = <&ldousb_reg>;
 };
 
+&usb2_phy2 {
+	phy-supply = <&ldousb_reg>;
+};
+
 &usb1 {
 	dr_mode = "host";
 	pinctrl-names = "default";

arch/arm/boot/dts/atlas7.dtsi

@@ -135,6 +135,1025 @@
 			compatible = "sirf,atlas7-ioc";
 			reg = <0x18880000 0x1000>,
 				<0x10E40000 0x1000>;
+
+			audio_ac97_pmx: audio_ac97@0 {
+				audio_ac97 {
+					groups = "audio_ac97_grp";
+					function = "audio_ac97";
+				};
+			};
+
+			audio_func_dbg_pmx: audio_func_dbg@0 {
+				audio_func_dbg {
+					groups = "audio_func_dbg_grp";
+					function = "audio_func_dbg";
+				};
+			};
+
+			audio_i2s_pmx: audio_i2s@0 {
+				audio_i2s {
+					groups = "audio_i2s_grp";
+					function = "audio_i2s";
+				};
+			};
+
+			audio_i2s_2ch_pmx: audio_i2s_2ch@0 {
+				audio_i2s_2ch {
+					groups = "audio_i2s_2ch_grp";
+					function = "audio_i2s_2ch";
+				};
+			};
+
+			audio_i2s_extclk_pmx: audio_i2s_extclk@0 {
+				audio_i2s_extclk {
+					groups = "audio_i2s_extclk_grp";
+					function = "audio_i2s_extclk";
+				};
+			};
+
+			audio_uart0_pmx: audio_uart0@0 {
+				audio_uart0 {
+					groups = "audio_uart0_grp";
+					function = "audio_uart0";
+				};
+			};
+
+			audio_uart1_pmx: audio_uart1@0 {
+				audio_uart1 {
+					groups = "audio_uart1_grp";
+					function = "audio_uart1";
+				};
+			};
+
+			audio_uart2_pmx0: audio_uart2@0 {
+				audio_uart2_0 {
+					groups = "audio_uart2_grp0";
+					function = "audio_uart2_m0";
+				};
+			};
+
+			audio_uart2_pmx1: audio_uart2@1 {
+				audio_uart2_1 {
+					groups = "audio_uart2_grp1";
+					function = "audio_uart2_m1";
+				};
+			};
+
+			c_can_trnsvr_pmx: c_can_trnsvr@0 {
+				c_can_trnsvr {
+					groups = "c_can_trnsvr_grp";
+					function = "c_can_trnsvr";
+				};
+			};
+
+			c0_can_pmx0: c0_can@0 {
+				c0_can_0 {
+					groups = "c0_can_grp0";
+					function = "c0_can_m0";
+				};
+			};
+
+			c0_can_pmx1: c0_can@1 {
+				c0_can_1 {
+					groups = "c0_can_grp1";
+					function = "c0_can_m1";
+				};
+			};
+
+			c1_can_pmx0: c1_can@0 {
+				c1_can_0 {
+					groups = "c1_can_grp0";
+					function = "c1_can_m0";
+				};
+			};
+
+			c1_can_pmx1: c1_can@1 {
+				c1_can_1 {
+					groups = "c1_can_grp1";
+					function = "c1_can_m1";
+				};
+			};
+
+			c1_can_pmx2: c1_can@2 {
+				c1_can_2 {
+					groups = "c1_can_grp2";
+					function = "c1_can_m2";
+				};
+			};
+
+			ca_audio_lpc_pmx: ca_audio_lpc@0 {
+				ca_audio_lpc {
+					groups = "ca_audio_lpc_grp";
+					function = "ca_audio_lpc";
+				};
+			};
+
+			ca_bt_lpc_pmx: ca_bt_lpc@0 {
+				ca_bt_lpc {
+					groups = "ca_bt_lpc_grp";
+					function = "ca_bt_lpc";
+				};
+			};
+
+			ca_coex_pmx: ca_coex@0 {
+				ca_coex {
+					groups = "ca_coex_grp";
+					function = "ca_coex";
+				};
+			};
+
+			ca_curator_lpc_pmx: ca_curator_lpc@0 {
+				ca_curator_lpc {
+					groups = "ca_curator_lpc_grp";
+					function = "ca_curator_lpc";
+				};
+			};
+
+			ca_pcm_debug_pmx: ca_pcm_debug@0 {
+				ca_pcm_debug {
+					groups = "ca_pcm_debug_grp";
+					function = "ca_pcm_debug";
+				};
+			};
+
+			ca_pio_pmx: ca_pio@0 {
+				ca_pio {
+					groups = "ca_pio_grp";
+					function = "ca_pio";
+				};
+			};
+
+			ca_sdio_debug_pmx: ca_sdio_debug@0 {
+				ca_sdio_debug {
+					groups = "ca_sdio_debug_grp";
+					function = "ca_sdio_debug";
+				};
+			};
+
+			ca_spi_pmx: ca_spi@0 {
+				ca_spi {
+					groups = "ca_spi_grp";
+					function = "ca_spi";
+				};
+			};
+
+			ca_trb_pmx: ca_trb@0 {
+				ca_trb {
+					groups = "ca_trb_grp";
+					function = "ca_trb";
+				};
+			};
+
+			ca_uart_debug_pmx: ca_uart_debug@0 {
+				ca_uart_debug {
+					groups = "ca_uart_debug_grp";
+					function = "ca_uart_debug";
+				};
+			};
+
+			clkc_pmx0: clkc@0 {
+				clkc_0 {
+					groups = "clkc_grp0";
+					function = "clkc_m0";
+				};
+			};
+
+			clkc_pmx1: clkc@1 {
+				clkc_1 {
+					groups = "clkc_grp1";
+					function = "clkc_m1";
+				};
+			};
+
+			gn_gnss_i2c_pmx: gn_gnss_i2c@0 {
+				gn_gnss_i2c {
+					groups = "gn_gnss_i2c_grp";
+					function = "gn_gnss_i2c";
+				};
+			};
+
+			gn_gnss_uart_nopause_pmx: gn_gnss_uart_nopause@0 {
+				gn_gnss_uart_nopause {
+					groups = "gn_gnss_uart_nopause_grp";
+					function = "gn_gnss_uart_nopause";
+				};
+			};
+
+			gn_gnss_uart_pmx: gn_gnss_uart@0 {
+				gn_gnss_uart {
+					groups = "gn_gnss_uart_grp";
+					function = "gn_gnss_uart";
+				};
+			};
+
+			gn_trg_spi_pmx0: gn_trg_spi@0 {
+				gn_trg_spi_0 {
+					groups = "gn_trg_spi_grp0";
+					function = "gn_trg_spi_m0";
+				};
+			};
+
+			gn_trg_spi_pmx1: gn_trg_spi@1 {
+				gn_trg_spi_1 {
+					groups = "gn_trg_spi_grp1";
+					function = "gn_trg_spi_m1";
+				};
+			};
+
+			cvbs_dbg_pmx: cvbs_dbg@0 {
+				cvbs_dbg {
+					groups = "cvbs_dbg_grp";
+					function = "cvbs_dbg";
+				};
+			};
+
+			cvbs_dbg_test_pmx0: cvbs_dbg_test@0 {
+				cvbs_dbg_test_0 {
+					groups = "cvbs_dbg_test_grp0";
+					function = "cvbs_dbg_test_m0";
+				};
+			};
+
+			cvbs_dbg_test_pmx1: cvbs_dbg_test@1 {
+				cvbs_dbg_test_1 {
+					groups = "cvbs_dbg_test_grp1";
+					function = "cvbs_dbg_test_m1";
+				};
+			};
+
+			cvbs_dbg_test_pmx2: cvbs_dbg_test@2 {
+				cvbs_dbg_test_2 {
+					groups = "cvbs_dbg_test_grp2";
+					function = "cvbs_dbg_test_m2";
+				};
+			};
+
+			cvbs_dbg_test_pmx3: cvbs_dbg_test@3 {
+				cvbs_dbg_test_3 {
+					groups = "cvbs_dbg_test_grp3";
+					function = "cvbs_dbg_test_m3";
+				};
+			};
+
+			cvbs_dbg_test_pmx4: cvbs_dbg_test@4 {
+				cvbs_dbg_test_4 {
+					groups = "cvbs_dbg_test_grp4";
+					function = "cvbs_dbg_test_m4";
+				};
+			};
+
+			cvbs_dbg_test_pmx5: cvbs_dbg_test@5 {
+				cvbs_dbg_test_5 {
+					groups = "cvbs_dbg_test_grp5";
+					function = "cvbs_dbg_test_m5";
+				};
+			};
+
+			cvbs_dbg_test_pmx6: cvbs_dbg_test@6 {
+				cvbs_dbg_test_6 {
+					groups = "cvbs_dbg_test_grp6";
+					function = "cvbs_dbg_test_m6";
+				};
+			};
+
+			cvbs_dbg_test_pmx7: cvbs_dbg_test@7 {
+				cvbs_dbg_test_7 {
+					groups = "cvbs_dbg_test_grp7";
+					function = "cvbs_dbg_test_m7";
+				};
+			};
+
+			cvbs_dbg_test_pmx8: cvbs_dbg_test@8 {
+				cvbs_dbg_test_8 {
+					groups = "cvbs_dbg_test_grp8";
+					function = "cvbs_dbg_test_m8";
+				};
+			};
+
+			cvbs_dbg_test_pmx9: cvbs_dbg_test@9 {
+				cvbs_dbg_test_9 {
+					groups = "cvbs_dbg_test_grp9";
+					function = "cvbs_dbg_test_m9";
+				};
+			};
+
+			cvbs_dbg_test_pmx10: cvbs_dbg_test@10 {
+				cvbs_dbg_test_10 {
+					groups = "cvbs_dbg_test_grp10";
+					function = "cvbs_dbg_test_m10";
+				};
+			};
+
+			cvbs_dbg_test_pmx11: cvbs_dbg_test@11 {
+				cvbs_dbg_test_11 {
+					groups = "cvbs_dbg_test_grp11";
+					function = "cvbs_dbg_test_m11";
+				};
+			};
+
+			cvbs_dbg_test_pmx12: cvbs_dbg_test@12 {
+				cvbs_dbg_test_12 {
+					groups = "cvbs_dbg_test_grp12";
+					function = "cvbs_dbg_test_m12";
+				};
+			};
+
+			cvbs_dbg_test_pmx13: cvbs_dbg_test@13 {
+				cvbs_dbg_test_13 {
+					groups = "cvbs_dbg_test_grp13";
+					function = "cvbs_dbg_test_m13";
+				};
+			};
+
+			cvbs_dbg_test_pmx14: cvbs_dbg_test@14 {
+				cvbs_dbg_test_14 {
+					groups = "cvbs_dbg_test_grp14";
+					function = "cvbs_dbg_test_m14";
+				};
+			};
+
+			cvbs_dbg_test_pmx15: cvbs_dbg_test@15 {
+				cvbs_dbg_test_15 {
+					groups = "cvbs_dbg_test_grp15";
+					function = "cvbs_dbg_test_m15";
+				};
+			};
+
+			gn_gnss_power_pmx: gn_gnss_power@0 {
+				gn_gnss_power {
+					groups = "gn_gnss_power_grp";
+					function = "gn_gnss_power";
+				};
+			};
+
+			gn_gnss_sw_status_pmx: gn_gnss_sw_status@0 {
+				gn_gnss_sw_status {
+					groups = "gn_gnss_sw_status_grp";
+					function = "gn_gnss_sw_status";
+				};
+			};
+
+			gn_gnss_eclk_pmx: gn_gnss_eclk@0 {
+				gn_gnss_eclk {
+					groups = "gn_gnss_eclk_grp";
+					function = "gn_gnss_eclk";
+				};
+			};
+
+			gn_gnss_irq1_pmx0: gn_gnss_irq1@0 {
+				gn_gnss_irq1_0 {
+					groups = "gn_gnss_irq1_grp0";
+					function = "gn_gnss_irq1_m0";
+				};
+			};
+
+			gn_gnss_irq2_pmx0: gn_gnss_irq2@0 {
+				gn_gnss_irq2_0 {
+					groups = "gn_gnss_irq2_grp0";
+					function = "gn_gnss_irq2_m0";
+				};
+			};
+
+			gn_gnss_tm_pmx: gn_gnss_tm@0 {
+				gn_gnss_tm {
+					groups = "gn_gnss_tm_grp";
+					function = "gn_gnss_tm";
+				};
+			};
+
+			gn_gnss_tsync_pmx: gn_gnss_tsync@0 {
+				gn_gnss_tsync {
+					groups = "gn_gnss_tsync_grp";
+					function = "gn_gnss_tsync";
+				};
+			};
+
+			gn_io_gnsssys_sw_cfg_pmx: gn_io_gnsssys_sw_cfg@0 {
+				gn_io_gnsssys_sw_cfg {
+					groups = "gn_io_gnsssys_sw_cfg_grp";
+					function = "gn_io_gnsssys_sw_cfg";
+				};
+			};
+
+			gn_trg_pmx0: gn_trg@0 {
+				gn_trg_0 {
+					groups = "gn_trg_grp0";
+					function = "gn_trg_m0";
+				};
+			};
+
+			gn_trg_pmx1: gn_trg@1 {
+				gn_trg_1 {
+					groups = "gn_trg_grp1";
+					function = "gn_trg_m1";
+				};
+			};
+
+			gn_trg_shutdown_pmx0: gn_trg_shutdown@0 {
+				gn_trg_shutdown_0 {
+					groups = "gn_trg_shutdown_grp0";
+					function = "gn_trg_shutdown_m0";
+				};
+			};
+
+			gn_trg_shutdown_pmx1: gn_trg_shutdown@1 {
+				gn_trg_shutdown_1 {
+					groups = "gn_trg_shutdown_grp1";
+					function = "gn_trg_shutdown_m1";
+				};
+			};
+
+			gn_trg_shutdown_pmx2: gn_trg_shutdown@2 {
+				gn_trg_shutdown_2 {
+					groups = "gn_trg_shutdown_grp2";
+					function = "gn_trg_shutdown_m2";
+				};
+			};
+
+			gn_trg_shutdown_pmx3: gn_trg_shutdown@3 {
+				gn_trg_shutdown_3 {
+					groups = "gn_trg_shutdown_grp3";
+					function = "gn_trg_shutdown_m3";
+				};
+			};
+
+			i2c0_pmx: i2c0@0 {
+				i2c0 {
+					groups = "i2c0_grp";
+					function = "i2c0";
+				};
+			};
+
+			i2c1_pmx: i2c1@0 {
+				i2c1 {
+					groups = "i2c1_grp";
+					function = "i2c1";
+				};
+			};
+
+			jtag_pmx0: jtag@0 {
+				jtag_0 {
+					groups = "jtag_grp0";
+					function = "jtag_m0";
+				};
+			};
+
+			ks_kas_spi_pmx0: ks_kas_spi@0 {
+				ks_kas_spi_0 {
+					groups = "ks_kas_spi_grp0";
+					function = "ks_kas_spi_m0";
+				};
+			};
+
+			ld_ldd_pmx: ld_ldd@0 {
+				ld_ldd {
+					groups = "ld_ldd_grp";
+					function = "ld_ldd";
+				};
+			};
+
+			ld_ldd_16bit_pmx: ld_ldd_16bit@0 {
+				ld_ldd_16bit {
+					groups = "ld_ldd_16bit_grp";
+					function = "ld_ldd_16bit";
+				};
+			};
+
+			ld_ldd_fck_pmx: ld_ldd_fck@0 {
+				ld_ldd_fck {
+					groups = "ld_ldd_fck_grp";
+					function = "ld_ldd_fck";
+				};
+			};
+
+			ld_ldd_lck_pmx: ld_ldd_lck@0 {
+				ld_ldd_lck {
+					groups = "ld_ldd_lck_grp";
+					function = "ld_ldd_lck";
+				};
+			};
+
+			lr_lcdrom_pmx: lr_lcdrom@0 {
+				lr_lcdrom {
+					groups = "lr_lcdrom_grp";
+					function = "lr_lcdrom";
+				};
+			};
+
+			lvds_analog_pmx: lvds_analog@0 {
+				lvds_analog {
+					groups = "lvds_analog_grp";
+					function = "lvds_analog";
+				};
+			};
+
+			nd_df_pmx: nd_df@0 {
+				nd_df {
+					groups = "nd_df_grp";
+					function = "nd_df";
+				};
+			};
+
+			nd_df_nowp_pmx: nd_df_nowp@0 {
+				nd_df_nowp {
+					groups = "nd_df_nowp_grp";
+					function = "nd_df_nowp";
+				};
+			};
+
+			ps_pmx: ps@0 {
+				ps {
+					groups = "ps_grp";
+					function = "ps";
+				};
+			};
+
+			pwc_core_on_pmx: pwc_core_on@0 {
+				pwc_core_on {
+					groups = "pwc_core_on_grp";
+					function = "pwc_core_on";
+				};
+			};
+
+			pwc_ext_on_pmx: pwc_ext_on@0 {
+				pwc_ext_on {
+					groups = "pwc_ext_on_grp";
+					function = "pwc_ext_on";
+				};
+			};
+
+			pwc_gpio3_clk_pmx: pwc_gpio3_clk@0 {
+				pwc_gpio3_clk {
+					groups = "pwc_gpio3_clk_grp";
+					function = "pwc_gpio3_clk";
+				};
+			};
+
+			pwc_io_on_pmx: pwc_io_on@0 {
+				pwc_io_on {
+					groups = "pwc_io_on_grp";
+					function = "pwc_io_on";
+				};
+			};
+
+			pwc_lowbatt_b_pmx0: pwc_lowbatt_b@0 {
+				pwc_lowbatt_b_0 {
+					groups = "pwc_lowbatt_b_grp0";
+					function = "pwc_lowbatt_b_m0";
+				};
+			};
+
+			pwc_mem_on_pmx: pwc_mem_on@0 {
+				pwc_mem_on {
+					groups = "pwc_mem_on_grp";
+					function = "pwc_mem_on";
+				};
+			};
+
+			pwc_on_key_b_pmx0: pwc_on_key_b@0 {
+				pwc_on_key_b_0 {
+					groups = "pwc_on_key_b_grp0";
+					function = "pwc_on_key_b_m0";
+				};
+			};
+
+			pwc_wakeup_src0_pmx: pwc_wakeup_src0@0 {
+				pwc_wakeup_src0 {
+					groups = "pwc_wakeup_src0_grp";
+					function = "pwc_wakeup_src0";
+				};
+			};
+
+			pwc_wakeup_src1_pmx: pwc_wakeup_src1@0 {
+				pwc_wakeup_src1 {
+					groups = "pwc_wakeup_src1_grp";
+					function = "pwc_wakeup_src1";
+				};
+			};
+
+			pwc_wakeup_src2_pmx: pwc_wakeup_src2@0 {
+				pwc_wakeup_src2 {
+					groups = "pwc_wakeup_src2_grp";
+					function = "pwc_wakeup_src2";
+				};
+			};
+
+			pwc_wakeup_src3_pmx: pwc_wakeup_src3@0 {
+				pwc_wakeup_src3 {
+					groups = "pwc_wakeup_src3_grp";
+					function = "pwc_wakeup_src3";
+				};
+			};
+
+			pw_cko0_pmx0: pw_cko0@0 {
+				pw_cko0_0 {
+					groups = "pw_cko0_grp0";
+					function = "pw_cko0_m0";
+				};
+			};
+
+			pw_cko0_pmx1: pw_cko0@1 {
+				pw_cko0_1 {
+					groups = "pw_cko0_grp1";
+					function = "pw_cko0_m1";
+				};
+			};
+
+			pw_cko0_pmx2: pw_cko0@2 {
+				pw_cko0_2 {
+					groups = "pw_cko0_grp2";
+					function = "pw_cko0_m2";
+				};
+			};
+
+			pw_cko1_pmx0: pw_cko1@0 {
+				pw_cko1_0 {
+					groups = "pw_cko1_grp0";
+					function = "pw_cko1_m0";
+				};
+			};
+
+			pw_cko1_pmx1: pw_cko1@1 {
+				pw_cko1_1 {
+					groups = "pw_cko1_grp1";
+					function = "pw_cko1_m1";
+				};
+			};
+
+			pw_i2s01_clk_pmx0: pw_i2s01_clk@0 {
+				pw_i2s01_clk_0 {
+					groups = "pw_i2s01_clk_grp0";
+					function = "pw_i2s01_clk_m0";
+				};
+			};
+
+			pw_i2s01_clk_pmx1: pw_i2s01_clk@1 {
+				pw_i2s01_clk_1 {
+					groups = "pw_i2s01_clk_grp1";
+					function = "pw_i2s01_clk_m1";
+				};
+			};
+
+			pw_pwm0_pmx: pw_pwm0@0 {
+				pw_pwm0 {
+					groups = "pw_pwm0_grp";
+					function = "pw_pwm0";
+				};
+			};
+
+			pw_pwm1_pmx: pw_pwm1@0 {
+				pw_pwm1 {
+					groups = "pw_pwm1_grp";
+					function = "pw_pwm1";
+				};
+			};
+
+			pw_pwm2_pmx0: pw_pwm2@0 {
+				pw_pwm2_0 {
+					groups = "pw_pwm2_grp0";
+					function = "pw_pwm2_m0";
+				};
+			};
+
+			pw_pwm2_pmx1: pw_pwm2@1 {
+				pw_pwm2_1 {
+					groups = "pw_pwm2_grp1";
+					function = "pw_pwm2_m1";
+				};
+			};
+
+			pw_pwm3_pmx0: pw_pwm3@0 {
+				pw_pwm3_0 {
+					groups = "pw_pwm3_grp0";
+					function = "pw_pwm3_m0";
+				};
+			};
+
+			pw_pwm3_pmx1: pw_pwm3@1 {
+				pw_pwm3_1 {
+					groups = "pw_pwm3_grp1";
+					function = "pw_pwm3_m1";
+				};
+			};
+
+			pw_pwm_cpu_vol_pmx0: pw_pwm_cpu_vol@0 {
+				pw_pwm_cpu_vol_0 {
+					groups = "pw_pwm_cpu_vol_grp0";
+					function = "pw_pwm_cpu_vol_m0";
+				};
+			};
+
+			pw_pwm_cpu_vol_pmx1: pw_pwm_cpu_vol@1 {
+				pw_pwm_cpu_vol_1 {
+					groups = "pw_pwm_cpu_vol_grp1";
+					function = "pw_pwm_cpu_vol_m1";
+				};
+			};
+
+			pw_backlight_pmx0: pw_backlight@0 {
+				pw_backlight_0 {
+					groups = "pw_backlight_grp0";
+					function = "pw_backlight_m0";
+				};
+			};
+
+			pw_backlight_pmx1: pw_backlight@1 {
+				pw_backlight_1 {
+					groups = "pw_backlight_grp1";
+					function = "pw_backlight_m1";
+				};
+			};
+
+			rg_eth_mac_pmx: rg_eth_mac@0 {
+				rg_eth_mac {
+					groups = "rg_eth_mac_grp";
+					function = "rg_eth_mac";
+				};
+			};
+
+			rg_gmac_phy_intr_n_pmx: rg_gmac_phy_intr_n@0 {
+				rg_gmac_phy_intr_n {
+					groups = "rg_gmac_phy_intr_n_grp";
+					function = "rg_gmac_phy_intr_n";
+				};
+			};
+
+			rg_rgmii_mac_pmx: rg_rgmii_mac@0 {
+				rg_rgmii_mac {
+					groups = "rg_rgmii_mac_grp";
+					function = "rg_rgmii_mac";
+				};
+			};
+
+			rg_rgmii_phy_ref_clk_pmx0: rg_rgmii_phy_ref_clk@0 {
+				rg_rgmii_phy_ref_clk_0 {
+					groups =
+						"rg_rgmii_phy_ref_clk_grp0";
+					function =
+						"rg_rgmii_phy_ref_clk_m0";
+				};
+			};
+
+			rg_rgmii_phy_ref_clk_pmx1: rg_rgmii_phy_ref_clk@1 {
+				rg_rgmii_phy_ref_clk_1 {
+					groups =
+						"rg_rgmii_phy_ref_clk_grp1";
+					function =
+						"rg_rgmii_phy_ref_clk_m1";
+				};
+			};
+
+			sd0_pmx: sd0@0 {
+				sd0 {
+					groups = "sd0_grp";
+					function = "sd0";
+				};
+			};
+
+			sd0_4bit_pmx: sd0_4bit@0 {
+				sd0_4bit {
+					groups = "sd0_4bit_grp";
+					function = "sd0_4bit";
+				};
+			};
+
+			sd1_pmx: sd1@0 {
+				sd1 {
+					groups = "sd1_grp";
+					function = "sd1";
+				};
+			};
+
+			sd1_4bit_pmx0: sd1_4bit@0 {
+				sd1_4bit_0 {
+					groups = "sd1_4bit_grp0";
+					function = "sd1_4bit_m0";
+				};
+			};
+
+			sd1_4bit_pmx1: sd1_4bit@1 {
+				sd1_4bit_1 {
+					groups = "sd1_4bit_grp1";
+					function = "sd1_4bit_m1";
+				};
+			};
+
+			sd2_pmx0: sd2@0 {
+				sd2_0 {
+					groups = "sd2_grp0";
+					function = "sd2_m0";
+				};
+			};
+
+			sd2_no_cdb_pmx0: sd2_no_cdb@0 {
+				sd2_no_cdb_0 {
+					groups = "sd2_no_cdb_grp0";
+					function = "sd2_no_cdb_m0";
+				};
+			};
+
+			sd3_pmx: sd3@0 {
+				sd3 {
+					groups = "sd3_grp";
+					function = "sd3";
+				};
+			};
+
+			sd5_pmx: sd5@0 {
+				sd5 {
+					groups = "sd5_grp";
+					function = "sd5";
+				};
+			};
+
+			sd6_pmx0: sd6@0 {
+				sd6_0 {
+					groups = "sd6_grp0";
+					function = "sd6_m0";
+				};
+			};
+
+			sd6_pmx1: sd6@1 {
+				sd6_1 {
+					groups = "sd6_grp1";
+					function = "sd6_m1";
+				};
+			};
+
+			sp0_ext_ldo_on_pmx: sp0_ext_ldo_on@0 {
+				sp0_ext_ldo_on {
+					groups = "sp0_ext_ldo_on_grp";
+					function = "sp0_ext_ldo_on";
+				};
+			};
+
+			sp0_qspi_pmx: sp0_qspi@0 {
+				sp0_qspi {
+					groups = "sp0_qspi_grp";
+					function = "sp0_qspi";
+				};
+			};
+
+			sp1_spi_pmx: sp1_spi@0 {
+				sp1_spi {
+					groups = "sp1_spi_grp";
+					function = "sp1_spi";
+				};
+			};
+
+			tpiu_trace_pmx: tpiu_trace@0 {
+				tpiu_trace {
+					groups = "tpiu_trace_grp";
+					function = "tpiu_trace";
+				};
+			};
+
+			uart0_pmx: uart0@0 {
+				uart0 {
+					groups = "uart0_grp";
+					function = "uart0";
+				};
+			};
+
+			uart0_nopause_pmx: uart0_nopause@0 {
+				uart0_nopause {
+					groups = "uart0_nopause_grp";
+					function = "uart0_nopause";
+				};
+			};
+
+			uart1_pmx: uart1@0 {
+				uart1 {
+					groups = "uart1_grp";
+					function = "uart1";
+				};
+			};
+
+			uart2_pmx: uart2@0 {
+				uart2 {
+					groups = "uart2_grp";
+					function = "uart2";
+				};
+			};
+
+			uart3_pmx0: uart3@0 {
+				uart3_0 {
+					groups = "uart3_grp0";
+					function = "uart3_m0";
+				};
+			};
+
+			uart3_pmx1: uart3@1 {
+				uart3_1 {
+					groups = "uart3_grp1";
+					function = "uart3_m1";
+				};
+			};
+
+			uart3_pmx2: uart3@2 {
+				uart3_2 {
+					groups = "uart3_grp2";
+					function = "uart3_m2";
+				};
+			};
+
+			uart3_pmx3: uart3@3 {
+				uart3_3 {
+					groups = "uart3_grp3";
+					function = "uart3_m3";
+				};
+			};
+
+			uart3_nopause_pmx0: uart3_nopause@0 {
+				uart3_nopause_0 {
+					groups = "uart3_nopause_grp0";
+					function = "uart3_nopause_m0";
+				};
+			};
+
+			uart3_nopause_pmx1: uart3_nopause@1 {
+				uart3_nopause_1 {
+					groups = "uart3_nopause_grp1";
+					function = "uart3_nopause_m1";
+				};
+			};
+
+			uart4_pmx0: uart4@0 {
+				uart4_0 {
+					groups = "uart4_grp0";
+					function = "uart4_m0";
+				};
+			};
+
+			uart4_pmx1: uart4@1 {
+				uart4_1 {
+					groups = "uart4_grp1";
+					function = "uart4_m1";
+				};
+			};
+
+			uart4_pmx2: uart4@2 {
+				uart4_2 {
+					groups = "uart4_grp2";
+					function = "uart4_m2";
+				};
+			};
+
+			uart4_nopause_pmx: uart4_nopause@0 {
+				uart4_nopause {
+					groups = "uart4_nopause_grp";
+					function = "uart4_nopause";
+				};
+			};
+
+			usb0_drvvbus_pmx: usb0_drvvbus@0 {
+				usb0_drvvbus {
+					groups = "usb0_drvvbus_grp";
+					function = "usb0_drvvbus";
+				};
+			};
+
+			usb1_drvvbus_pmx: usb1_drvvbus@0 {
+				usb1_drvvbus {
+					groups = "usb1_drvvbus_grp";
+					function = "usb1_drvvbus";
+				};
+			};
+
+			visbus_dout_pmx: visbus_dout@0 {
+				visbus_dout {
+					groups = "visbus_dout_grp";
+					function = "visbus_dout";
+				};
+			};
+
+			vi_vip1_pmx: vi_vip1@0 {
+				vi_vip1 {
+					groups = "vi_vip1_grp";
+					function = "vi_vip1";
+				};
+			};
+
+			vi_vip1_ext_pmx: vi_vip1_ext@0 {
+				vi_vip1_ext {
+					groups = "vi_vip1_ext_grp";
+					function = "vi_vip1_ext";
+				};
+			};
+
+			vi_vip1_low8bit_pmx: vi_vip1_low8bit@0 {
+				vi_vip1_low8bit {
+					groups = "vi_vip1_low8bit_grp";
+					function = "vi_vip1_low8bit";
+				};
+			};
+
+			vi_vip1_high8bit_pmx: vi_vip1_high8bit@0 {
+				vi_vip1_high8bit {
+					groups = "vi_vip1_high8bit_grp";
+					function = "vi_vip1_high8bit";
+				};
+			};
 		};
 
 		pmipc {
@@ -356,6 +1375,12 @@
 				clock-names = "gpio0_io";
 				gpio-controller;
 				interrupt-controller;
+
+				gpio-banks = <2>;
+				gpio-ranges = <&pinctrl 0 0 0>,
+						<&pinctrl 32 0 0>;
+				gpio-ranges-group-names = "lvds_gpio_grp",
+							"uart_nand_gpio_grp";
 			};
 
 			nand@17050000 {
@@ -461,11 +1486,22 @@
 				#interrupt-cells = <2>;
 				compatible = "sirf,atlas7-gpio";
 				reg = <0x13300000 0x1000>;
-				interrupts = <0 43 0>, <0 44 0>, <0 45 0>;
+				interrupts = <0 43 0>, <0 44 0>,
+						<0 45 0>, <0 46 0>;
 				clocks = <&car 84>;
 				clock-names = "gpio1_io";
 				gpio-controller;
 				interrupt-controller;
+
+				gpio-banks = <4>;
+				gpio-ranges = <&pinctrl 0 0 0>,
+						<&pinctrl 32 0 0>,
+						<&pinctrl 64 0 0>,
+						<&pinctrl 96 0 0>;
+				gpio-ranges-group-names = "gnss_gpio_grp",
+							"lcd_vip_gpio_grp",
+							"sdio_i2s_gpio_grp",
+							"sp_rgmii_gpio_grp";
 			};
 
 			sd2: sdhci@14200000 {
@@ -744,6 +1780,10 @@
 				interrupts = <0 47 0>;
 				gpio-controller;
 				interrupt-controller;
+
+				gpio-banks = <1>;
+				gpio-ranges = <&pinctrl 0 0 0>;
+				gpio-ranges-group-names = "rtc_gpio_grp";
 			};
 
 			rtc-iobg@18840000 {

arch/arm/boot/dts/cros-ec-keyboard.dtsi

@@ -22,6 +22,7 @@
 			MATRIX_KEY(0x00, 0x02, KEY_F1)
 			MATRIX_KEY(0x00, 0x03, KEY_B)
 			MATRIX_KEY(0x00, 0x04, KEY_F10)
+			MATRIX_KEY(0x00, 0x05, KEY_RO)
 			MATRIX_KEY(0x00, 0x06, KEY_N)
 			MATRIX_KEY(0x00, 0x08, KEY_EQUAL)
 			MATRIX_KEY(0x00, 0x0a, KEY_RIGHTALT)
@@ -34,6 +35,7 @@
 			MATRIX_KEY(0x01, 0x08, KEY_APOSTROPHE)
 			MATRIX_KEY(0x01, 0x09, KEY_F9)
 			MATRIX_KEY(0x01, 0x0b, KEY_BACKSPACE)
+			MATRIX_KEY(0x01, 0x0c, KEY_HENKAN)
 
 			MATRIX_KEY(0x02, 0x00, KEY_LEFTCTRL)
 			MATRIX_KEY(0x02, 0x01, KEY_TAB)
@@ -45,6 +47,7 @@
 			MATRIX_KEY(0x02, 0x07, KEY_102ND)
 			MATRIX_KEY(0x02, 0x08, KEY_LEFTBRACE)
 			MATRIX_KEY(0x02, 0x09, KEY_F8)
+			MATRIX_KEY(0x02, 0x0a, KEY_YEN)
 
 			MATRIX_KEY(0x03, 0x01, KEY_GRAVE)
 			MATRIX_KEY(0x03, 0x02, KEY_F2)
@@ -53,6 +56,7 @@
 			MATRIX_KEY(0x03, 0x06, KEY_6)
 			MATRIX_KEY(0x03, 0x08, KEY_MINUS)
 			MATRIX_KEY(0x03, 0x0b, KEY_BACKSLASH)
+			MATRIX_KEY(0x03, 0x0c, KEY_MUHENKAN)
 
 			MATRIX_KEY(0x04, 0x00, KEY_RIGHTCTRL)
 			MATRIX_KEY(0x04, 0x01, KEY_A)

arch/arm/boot/dts/dra7-evm.dts

@@ -686,7 +686,8 @@
 
 &dcan1 {
 	status = "ok";
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&dcan1_pins_default>;
+	pinctrl-names = "default", "sleep", "active";
+	pinctrl-0 = <&dcan1_pins_sleep>;
 	pinctrl-1 = <&dcan1_pins_sleep>;
+	pinctrl-2 = <&dcan1_pins_default>;
 };

arch/arm/boot/dts/dra72-evm.dts

@@ -587,9 +587,10 @@
 
 &dcan1 {
 	status = "ok";
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&dcan1_pins_default>;
+	pinctrl-names = "default", "sleep", "active";
+	pinctrl-0 = <&dcan1_pins_sleep>;
 	pinctrl-1 = <&dcan1_pins_sleep>;
+	pinctrl-2 = <&dcan1_pins_default>;
 };
 
 &qspi {

arch/arm/boot/dts/imx23.dtsi

@@ -468,6 +468,7 @@
 				interrupts = <36 37 38 39 40 41 42 43 44>;
 				status = "disabled";
 				clocks = <&clks 26>;
+				#io-channel-cells = <1>;
 			};
 
 			spdif@80054000 {

arch/arm/boot/dts/imx27.dtsi

@@ -108,7 +108,7 @@
 			};
 
 			gpt1: timer@10003000 {
-				compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
+				compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
 				reg = <0x10003000 0x1000>;
 				interrupts = <26>;
 				clocks = <&clks IMX27_CLK_GPT1_IPG_GATE>,
@@ -117,7 +117,7 @@
 			};
 
 			gpt2: timer@10004000 {
-				compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
+				compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
 				reg = <0x10004000 0x1000>;
 				interrupts = <25>;
 				clocks = <&clks IMX27_CLK_GPT2_IPG_GATE>,
@@ -126,7 +126,7 @@
 			};
 
 			gpt3: timer@10005000 {
-				compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
+				compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
 				reg = <0x10005000 0x1000>;
 				interrupts = <24>;
 				clocks = <&clks IMX27_CLK_GPT3_IPG_GATE>,
@@ -376,7 +376,7 @@
 			};
 
 			gpt4: timer@10019000 {
-				compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
+				compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
 				reg = <0x10019000 0x1000>;
 				interrupts = <4>;
 				clocks = <&clks IMX27_CLK_GPT4_IPG_GATE>,
@@ -385,7 +385,7 @@
 			};
 
 			gpt5: timer@1001a000 {
-				compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
+				compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
 				reg = <0x1001a000 0x1000>;
 				interrupts = <3>;
 				clocks = <&clks IMX27_CLK_GPT5_IPG_GATE>,
@@ -436,7 +436,7 @@
 			};
 
 			gpt6: timer@1001f000 {
-				compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
+				compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
 				reg = <0x1001f000 0x1000>;
 				interrupts = <2>;
 				clocks = <&clks IMX27_CLK_GPT6_IPG_GATE>,

arch/arm/boot/dts/imx53-qsb-common.dtsi

@@ -295,9 +295,10 @@
 &tve {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_vga_sync>;
+	ddc-i2c-bus = <&i2c2>;
 	fsl,tve-mode = "vga";
-	fsl,hsync-pin = <4>;
-	fsl,vsync-pin = <6>;
+	fsl,hsync-pin = <7>;	/* IPU DI1 PIN7 via EIM_OE */
+	fsl,vsync-pin = <8>;	/* IPU DI1 PIN8 via EIM_RW */
 	status = "okay";
 };
 

arch/arm/boot/dts/k2e.dtsi

@@ -86,7 +86,7 @@
 			gpio,syscon-dev = <&devctrl 0x240>;
 		};
 
-		pcie@21020000 {
+		pcie1: pcie@21020000 {
 			compatible = "ti,keystone-pcie","snps,dw-pcie";
 			clocks = <&clkpcie1>;
 			clock-names = "pcie";
@@ -96,6 +96,7 @@
 			ranges = <0x81000000 0 0 0x23260000 0x4000 0x4000
 				0x82000000 0 0x60000000 0x60000000 0 0x10000000>;
 
+			status = "disabled";
 			device_type = "pci";
 			num-lanes = <2>;
 

arch/arm/boot/dts/keystone.dtsi

@@ -286,7 +286,7 @@
 			ti,syscon-dev = <&devctrl 0x2a0>;
 		};
 
-		pcie@21800000 {
+		pcie0: pcie@21800000 {
 			compatible = "ti,keystone-pcie", "snps,dw-pcie";
 			clocks = <&clkpcie>;
 			clock-names = "pcie";
@@ -296,6 +296,7 @@
 			ranges = <0x81000000 0 0 0x23250000 0 0x4000
 				0x82000000 0 0x50000000 0x50000000 0 0x10000000>;
 
+			status = "disabled";
 			device_type = "pci";
 			num-lanes = <2>;
 

arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi

@@ -120,7 +120,7 @@
 
 	lcd0: display@0 {
 		compatible = "lgphilips,lb035q02";
-		label = "lcd";
+		label = "lcd35";
 
 		reg = <1>;					/* CS1 */
 		spi-max-frequency = <10000000>;

arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi

@@ -98,7 +98,7 @@
 
 	lcd0: display@0 {
 		compatible = "samsung,lte430wq-f0c", "panel-dpi";
-		label = "lcd";
+		label = "lcd43";
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&lte430_pins>;

arch/arm/boot/dts/omap4.dtsi

@@ -551,6 +551,7 @@
 			reg = <0x4a066000 0x100>;
 			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "mmu_dsp";
+			#iommu-cells = <0>;
 		};
 
 		mmu_ipu: mmu@55082000 {
@@ -558,6 +559,7 @@
 			reg = <0x55082000 0x100>;
 			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "mmu_ipu";
+			#iommu-cells = <0>;
 			ti,iommu-bus-err-back;
 		};
 

arch/arm/boot/dts/omap5.dtsi

@@ -612,6 +612,7 @@
 			reg = <0x4a066000 0x100>;
 			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "mmu_dsp";
+			#iommu-cells = <0>;
 		};
 
 		mmu_ipu: mmu@55082000 {
@@ -619,6 +620,7 @@
 			reg = <0x55082000 0x100>;
 			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "mmu_ipu";
+			#iommu-cells = <0>;
 			ti,iommu-bus-err-back;
 		};
 

arch/arm/boot/dts/socfpga_cyclone5_sockit.dts

@@ -60,27 +60,27 @@
 	rxc-skew-ps = <2000>;
 };
 
-&mmc0 {
-	vmmc-supply = <&regulator_3_3v>;
-	vqmmc-supply = <&regulator_3_3v>;
-};
-
-&usb1 {
-	status = "okay";
-};
-
 &gpio2 {
 	status = "okay";
 };
 
-&i2c1{
+&i2c1 {
 	status = "okay";
 
-	accel1: accel1@53{
-		compatible = "adxl34x";
+	accel1: accelerometer@53 {
+		compatible = "adi,adxl345";
 		reg = <0x53>;
 
-		interrupt-parent = < &portc >;
+		interrupt-parent = <&portc>;
 		interrupts = <3 2>;
 	};
 };
+
+&mmc0 {
+	vmmc-supply = <&regulator_3_3v>;
+	vqmmc-supply = <&regulator_3_3v>;
+};
+
+&usb1 {
+	status = "okay";
+};

arch/arm/boot/dts/spear1310-evb.dts

@@ -1,7 +1,7 @@
 /*
  * DTS file for SPEAr1310 Evaluation Baord
  *
- * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
+ * Copyright 2012 Viresh Kumar <vireshk@kernel.org>
  *
  * The code contained herein is licensed under the GNU General Public
  * License. You may obtain a copy of the GNU General Public License

arch/arm/boot/dts/spear1310.dtsi

@@ -1,7 +1,7 @@
 /*
  * DTS file for all SPEAr1310 SoCs
  *
- * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
+ * Copyright 2012 Viresh Kumar <vireshk@kernel.org>
  *
  * The code contained herein is licensed under the GNU General Public
  * License. You may obtain a copy of the GNU General Public License

arch/arm/boot/dts/spear1340-evb.dts

@@ -1,7 +1,7 @@
 /*
  * DTS file for SPEAr1340 Evaluation Baord
  *
- * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
+ * Copyright 2012 Viresh Kumar <vireshk@kernel.org>
  *
  * The code contained herein is licensed under the GNU General Public
  * License. You may obtain a copy of the GNU General Public License

arch/arm/boot/dts/spear1340.dtsi

@@ -1,7 +1,7 @@
 /*
  * DTS file for all SPEAr1340 SoCs
  *
- * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
+ * Copyright 2012 Viresh Kumar <vireshk@kernel.org>
  *
  * The code contained herein is licensed under the GNU General Public
  * License. You may obtain a copy of the GNU General Public License

arch/arm/boot/dts/spear13xx.dtsi

@@ -1,7 +1,7 @@
 /*
  * DTS file for all SPEAr13xx SoCs
  *
- * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
+ * Copyright 2012 Viresh Kumar <vireshk@kernel.org>
  *
  * The code contained herein is licensed under the GNU General Public
  * License. You may obtain a copy of the GNU General Public License

arch/arm/boot/dts/spear300-evb.dts

@@ -1,7 +1,7 @@
 /*
  * DTS file for SPEAr300 Evaluation Baord
  *
- * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
+ * Copyright 2012 Viresh Kumar <vireshk@kernel.org>
  *
  * The code contained herein is licensed under the GNU General Public
  * License. You may obtain a copy of the GNU General Public License

arch/arm/boot/dts/spear300.dtsi

@@ -1,7 +1,7 @@
 /*
  * DTS file for SPEAr300 SoC
  *
- * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
+ * Copyright 2012 Viresh Kumar <vireshk@kernel.org>
  *
  * The code contained herein is licensed under the GNU General Public
  * License. You may obtain a copy of the GNU General Public License

arch/arm/boot/dts/spear310-evb.dts

@@ -1,7 +1,7 @@
 /*
  * DTS file for SPEAr310 Evaluation Baord
  *
- * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
+ * Copyright 2012 Viresh Kumar <vireshk@kernel.org>
  *
  * The code contained herein is licensed under the GNU General Public
  * License. You may obtain a copy of the GNU General Public License

arch/arm/boot/dts/spear310.dtsi

@@ -1,7 +1,7 @@
 /*
  * DTS file for SPEAr310 SoC
  *
- * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
+ * Copyright 2012 Viresh Kumar <vireshk@kernel.org>
  *
  * The code contained herein is licensed under the GNU General Public
  * License. You may obtain a copy of the GNU General Public License

arch/arm/boot/dts/spear320-evb.dts

@@ -1,7 +1,7 @@
 /*
  * DTS file for SPEAr320 Evaluation Baord
  *
- * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
+ * Copyright 2012 Viresh Kumar <vireshk@kernel.org>
  *
  * The code contained herein is licensed under the GNU General Public
  * License. You may obtain a copy of the GNU General Public License

arch/arm/boot/dts/spear320.dtsi

@@ -1,7 +1,7 @@
 /*
  * DTS file for SPEAr320 SoC
  *
- * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
+ * Copyright 2012 Viresh Kumar <vireshk@kernel.org>
  *
  * The code contained herein is licensed under the GNU General Public
  * License. You may obtain a copy of the GNU General Public License

arch/arm/boot/dts/spear3xx.dtsi

@@ -1,7 +1,7 @@
 /*
  * DTS file for all SPEAr3xx SoCs
  *
- * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
+ * Copyright 2012 Viresh Kumar <vireshk@kernel.org>
  *
  * The code contained herein is licensed under the GNU General Public
  * License. You may obtain a copy of the GNU General Public License

arch/arm/boot/dts/ste-ccu8540.dts

@@ -17,6 +17,13 @@
 	model = "ST-Ericsson U8540 platform with Device Tree";
 	compatible = "st-ericsson,ccu8540", "st-ericsson,u8540";
 
+	/* This stablilizes the serial port enumeration */
+	aliases {
+		serial0 = &ux500_serial0;
+		serial1 = &ux500_serial1;
+		serial2 = &ux500_serial2;
+	};
+
 	memory@0 {
 		device_type = "memory";
 		reg = <0x20000000 0x1f000000>, <0xc0000000 0x3f000000>;

arch/arm/boot/dts/ste-ccu9540.dts

@@ -16,6 +16,13 @@
 	model = "ST-Ericsson CCU9540 platform with Device Tree";
 	compatible = "st-ericsson,ccu9540", "st-ericsson,u9540";
 
+	/* This stablilizes the serial port enumeration */
+	aliases {
+		serial0 = &ux500_serial0;
+		serial1 = &ux500_serial1;
+		serial2 = &ux500_serial2;
+	};
+
 	memory {
 		reg = <0x00000000 0x20000000>;
 	};

arch/arm/boot/dts/ste-dbx5x0.dtsi

@@ -971,7 +971,7 @@
 			power-domains = <&pm_domains DOMAIN_VAPE>;
 		};
 
-		uart@80120000 {
+		ux500_serial0: uart@80120000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x80120000 0x1000>;
 			interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
@@ -986,7 +986,7 @@
 			status = "disabled";
 		};
 
-		uart@80121000 {
+		ux500_serial1: uart@80121000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x80121000 0x1000>;
 			interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
@@ -1001,7 +1001,7 @@
 			status = "disabled";
 		};
 
-		uart@80007000 {
+		ux500_serial2: uart@80007000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x80007000 0x1000>;
 			interrupts = <0 26 IRQ_TYPE_LEVEL_HIGH>;

arch/arm/boot/dts/ste-href.dtsi

@@ -32,11 +32,11 @@
 			status = "okay";
 		};
 
+		/* This UART is unused and thus left disabled */
 		uart@80121000 {
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&uart1_default_mode>;
 			pinctrl-1 = <&uart1_sleep_mode>;
-			status = "okay";
 		};
 
 		uart@80007000 {

arch/arm/boot/dts/ste-hrefprev60-stuib.dts

@@ -17,6 +17,13 @@
 	model = "ST-Ericsson HREF (pre-v60) and ST UIB";
 	compatible = "st-ericsson,mop500", "st-ericsson,u8500";
 
+	/* This stablilizes the serial port enumeration */
+	aliases {
+		serial0 = &ux500_serial0;
+		serial1 = &ux500_serial1;
+		serial2 = &ux500_serial2;
+	};
+
 	soc {
 		/* Reset line for the BU21013 touchscreen */
 		i2c@80110000 {

arch/arm/boot/dts/ste-hrefprev60-tvk.dts

@@ -16,4 +16,11 @@
 / {
 	model = "ST-Ericsson HREF (pre-v60) and TVK1281618 UIB";
 	compatible = "st-ericsson,mop500", "st-ericsson,u8500";
+
+	/* This stablilizes the serial port enumeration */
+	aliases {
+		serial0 = &ux500_serial0;
+		serial1 = &ux500_serial1;
+		serial2 = &ux500_serial2;
+	};
 };

arch/arm/boot/dts/ste-hrefprev60.dtsi

@@ -23,6 +23,11 @@
 	};
 
 	soc {
+		/* Enable UART1 on this board */
+		uart@80121000 {
+			status = "okay";
+		};
+
 		i2c@80004000 {
 			tps61052@33 {
 				compatible = "tps61052";

arch/arm/boot/dts/ste-hrefv60plus-stuib.dts

@@ -19,6 +19,13 @@
 	model = "ST-Ericsson HREF (v60+) and ST UIB";
 	compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500";
 
+	/* This stablilizes the serial port enumeration */
+	aliases {
+		serial0 = &ux500_serial0;
+		serial1 = &ux500_serial1;
+		serial2 = &ux500_serial2;
+	};
+
 	soc {
 		/* Reset line for the BU21013 touchscreen */
 		i2c@80110000 {

arch/arm/boot/dts/ste-hrefv60plus-tvk.dts

@@ -18,4 +18,11 @@
 / {
 	model = "ST-Ericsson HREF (v60+) and TVK1281618 UIB";
 	compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500";
+
+	/* This stablilizes the serial port enumeration */
+	aliases {
+		serial0 = &ux500_serial0;
+		serial1 = &ux500_serial1;
+		serial2 = &ux500_serial2;
+	};
 };

arch/arm/boot/dts/ste-hrefv60plus.dtsi

@@ -43,15 +43,26 @@
 				  <&vaudio_hf_hrefv60_mode>,
 				  <&gbf_hrefv60_mode>,
 				  <&hdtv_hrefv60_mode>,
-				  <&touch_hrefv60_mode>;
+				  <&touch_hrefv60_mode>,
+				  <&gpios_hrefv60_mode>;
 
 			sdi0 {
-				/* SD card detect GPIO pin, extend default state */
 				sdi0_default_mode: sdi0_default {
+					/* SD card detect GPIO pin, extend default state */
 					default_hrefv60_cfg1 {
 						pins = "GPIO95_E8";
 						ste,config = <&gpio_in_pu>;
 					};
+					/* VMMCI level-shifter enable */
+					default_hrefv60_cfg2 {
+						pins = "GPIO169_D22";
+						ste,config = <&gpio_out_lo>;
+					};
+					/* VMMCI level-shifter voltage select */
+					default_hrefv60_cfg3 {
+						pins = "GPIO5_AG6";
+						ste,config = <&gpio_out_hi>;
+					};
 				};
 			};
 			ipgpio {
@@ -213,6 +224,16 @@
 					};
 				};
 			};
+			gpios {
+				/* Dangling GPIO pins */
+				gpios_hrefv60_mode: gpios_hrefv60 {
+					default_cfg1 {
+						/* Normally UART1 RXD, now dangling */
+						pins = "GPIO4_AH6";
+						ste,config = <&in_pu>;
+					};
+				};
+			};
 		};
 	};
 };

arch/arm/boot/dts/ste-snowball.dts

@@ -18,6 +18,13 @@
 	model = "Calao Systems Snowball platform with device tree";
 	compatible = "calaosystems,snowball-a9500", "st-ericsson,u9500";
 
+	/* This stablilizes the serial port enumeration */
+	aliases {
+		serial0 = &ux500_serial0;
+		serial1 = &ux500_serial1;
+		serial2 = &ux500_serial2;
+	};
+
 	memory {
 		reg = <0x00000000 0x20000000>;
 	};
@@ -223,11 +230,11 @@
 			status = "okay";
 		};
 
+		/* This UART is unused and thus left disabled */
 		uart@80121000 {
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&uart1_default_mode>;
 			pinctrl-1 = <&uart1_sleep_mode>;
-			status = "okay";
 		};
 
 		uart@80007000 {
@@ -452,7 +459,21 @@
 						pins = "GPIO21_AB3"; /* DAT31DIR */
 						ste,config = <&out_hi>;
 					};
-
+					/* SD card detect GPIO pin, extend default state */
+					snowball_cfg2 {
+						pins = "GPIO218_AH11";
+						ste,config = <&gpio_in_pu>;
+					};
+					/* VMMCI level-shifter enable */
+					snowball_cfg3 {
+						pins = "GPIO217_AH12";
+						ste,config = <&gpio_out_lo>;
+					};
+					/* VMMCI level-shifter voltage select */
+					snowball_cfg4 {
+						pins = "GPIO228_AJ6";
+						ste,config = <&gpio_out_hi>;
+					};
 				};
 			};
 			ssp0 {

arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts

@@ -150,6 +150,16 @@
 			interface-type = "ace";
 			reg = <0x5000 0x1000>;
 		};
+
+		pmu@9000 {
+			 compatible = "arm,cci-400-pmu,r0";
+			 reg = <0x9000 0x5000>;
+			 interrupts = <0 105 4>,
+				      <0 101 4>,
+				      <0 102 4>,
+				      <0 103 4>,
+				      <0 104 4>;
+		};
 	};
 
 	memory-controller@7ffd0000 {
@@ -187,11 +197,22 @@
 			     <1 10 0xf08>;
 	};
 
-	pmu {
+	pmu_a15 {
 		compatible = "arm,cortex-a15-pmu";
 		interrupts = <0 68 4>,
 			     <0 69 4>;
-		interrupt-affinity = <&cpu0>, <&cpu1>;
+		interrupt-affinity = <&cpu0>,
+				     <&cpu1>;
+	};
+
+	pmu_a7 {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <0 128 4>,
+			     <0 129 4>,
+			     <0 130 4>;
+		interrupt-affinity = <&cpu2>,
+				     <&cpu3>,
+				     <&cpu4>;
 	};
 
 	oscclk6a: oscclk6a {

arch/arm/configs/multi_v7_defconfig

@@ -353,7 +353,6 @@ CONFIG_POWER_RESET_AS3722=y
 CONFIG_POWER_RESET_GPIO=y
 CONFIG_POWER_RESET_GPIO_RESTART=y
 CONFIG_POWER_RESET_KEYSTONE=y
-CONFIG_POWER_RESET_SUN6I=y
 CONFIG_POWER_RESET_RMOBILE=y
 CONFIG_SENSORS_LM90=y
 CONFIG_SENSORS_LM95245=y

arch/arm/configs/sunxi_defconfig

@@ -2,6 +2,7 @@ CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_PERF_EVENTS=y
+CONFIG_MODULES=y
 CONFIG_ARCH_SUNXI=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=8
@@ -77,7 +78,6 @@ CONFIG_SPI_SUN6I=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_POWER_SUPPLY=y
 CONFIG_POWER_RESET=y
-CONFIG_POWER_RESET_SUN6I=y
 CONFIG_THERMAL=y
 CONFIG_CPU_THERMAL=y
 CONFIG_WATCHDOG=y
@@ -87,6 +87,10 @@ CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_AXP20X=y
 CONFIG_REGULATOR_GPIO=y
+CONFIG_FB=y
+CONFIG_FB_SIMPLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_HCD_PLATFORM=y

arch/arm/include/asm/Kbuild

@@ -13,6 +13,7 @@ generic-y += kdebug.h
 generic-y += local.h
 generic-y += local64.h
 generic-y += mcs_spinlock.h
+generic-y += mm-arch-hooks.h
 generic-y += msgbuf.h
 generic-y += param.h
 generic-y += parport.h

arch/arm/include/asm/io.h

@@ -140,16 +140,11 @@ static inline u32 __raw_readl(const volatile void __iomem *addr)
  * The _caller variety takes a __builtin_return_address(0) value for
  * /proc/vmalloc to use - and should only be used in non-inline functions.
  */
-extern void __iomem *__arm_ioremap_pfn_caller(unsigned long, unsigned long,
-	size_t, unsigned int, void *);
 extern void __iomem *__arm_ioremap_caller(phys_addr_t, size_t, unsigned int,
 	void *);
-
 extern void __iomem *__arm_ioremap_pfn(unsigned long, unsigned long, size_t, unsigned int);
-extern void __iomem *__arm_ioremap(phys_addr_t, size_t, unsigned int);
 extern void __iomem *__arm_ioremap_exec(phys_addr_t, size_t, bool cached);
 extern void __iounmap(volatile void __iomem *addr);
-extern void __arm_iounmap(volatile void __iomem *addr);
 
 extern void __iomem * (*arch_ioremap_caller)(phys_addr_t, size_t,
 	unsigned int, void *);
@@ -321,21 +316,24 @@ extern void _memset_io(volatile void __iomem *, int, size_t);
 static inline void memset_io(volatile void __iomem *dst, unsigned c,
 	size_t count)
 {
-	memset((void __force *)dst, c, count);
+	extern void mmioset(void *, unsigned int, size_t);
+	mmioset((void __force *)dst, c, count);
 }
 #define memset_io(dst,c,count) memset_io(dst,c,count)
 
 static inline void memcpy_fromio(void *to, const volatile void __iomem *from,
 	size_t count)
 {
-	memcpy(to, (const void __force *)from, count);
+	extern void mmiocpy(void *, const void *, size_t);
+	mmiocpy(to, (const void __force *)from, count);
 }
 #define memcpy_fromio(to,from,count) memcpy_fromio(to,from,count)
 
 static inline void memcpy_toio(volatile void __iomem *to, const void *from,
 	size_t count)
 {
-	memcpy((void __force *)to, from, count);
+	extern void mmiocpy(void *, const void *, size_t);
+	mmiocpy((void __force *)to, from, count);
 }
 #define memcpy_toio(to,from,count) memcpy_toio(to,from,count)
 
@@ -348,18 +346,61 @@ static inline void memcpy_toio(volatile void __iomem *to, const void *from,
 #endif	/* readl */
 
 /*
- * ioremap and friends.
+ * ioremap() and friends.
+ *
+ * ioremap() takes a resource address, and size.  Due to the ARM memory
+ * types, it is important to use the correct ioremap() function as each
+ * mapping has specific properties.
+ *
+ * Function		Memory type	Cacheability	Cache hint
+ * ioremap()		Device		n/a		n/a
+ * ioremap_nocache()	Device		n/a		n/a
+ * ioremap_cache()	Normal		Writeback	Read allocate
+ * ioremap_wc()		Normal		Non-cacheable	n/a
+ * ioremap_wt()		Normal		Non-cacheable	n/a
+ *
+ * All device mappings have the following properties:
+ * - no access speculation
+ * - no repetition (eg, on return from an exception)
+ * - number, order and size of accesses are maintained
+ * - unaligned accesses are "unpredictable"
+ * - writes may be delayed before they hit the endpoint device
  *
- * ioremap takes a PCI memory address, as specified in
- * Documentation/io-mapping.txt.
+ * ioremap_nocache() is the same as ioremap() as there are too many device
+ * drivers using this for device registers, and documentation which tells
+ * people to use it for such for this to be any different.  This is not a
+ * safe fallback for memory-like mappings, or memory regions where the
+ * compiler may generate unaligned accesses - eg, via inlining its own
+ * memcpy.
  *
+ * All normal memory mappings have the following properties:
+ * - reads can be repeated with no side effects
+ * - repeated reads return the last value written
+ * - reads can fetch additional locations without side effects
+ * - writes can be repeated (in certain cases) with no side effects
+ * - writes can be merged before accessing the target
+ * - unaligned accesses can be supported
+ * - ordering is not guaranteed without explicit dependencies or barrier
+ *   instructions
+ * - writes may be delayed before they hit the endpoint memory
+ *
+ * The cache hint is only a performance hint: CPUs may alias these hints.
+ * Eg, a CPU not implementing read allocate but implementing write allocate
+ * will provide a write allocate mapping instead.
  */
-#define ioremap(cookie,size)		__arm_ioremap((cookie), (size), MT_DEVICE)
-#define ioremap_nocache(cookie,size)	__arm_ioremap((cookie), (size), MT_DEVICE)
-#define ioremap_cache(cookie,size)	__arm_ioremap((cookie), (size), MT_DEVICE_CACHED)
-#define ioremap_wc(cookie,size)		__arm_ioremap((cookie), (size), MT_DEVICE_WC)
-#define ioremap_wt(cookie,size)		__arm_ioremap((cookie), (size), MT_DEVICE)
-#define iounmap				__arm_iounmap
+void __iomem *ioremap(resource_size_t res_cookie, size_t size);
+#define ioremap ioremap
+#define ioremap_nocache ioremap
+
+void __iomem *ioremap_cache(resource_size_t res_cookie, size_t size);
+#define ioremap_cache ioremap_cache
+
+void __iomem *ioremap_wc(resource_size_t res_cookie, size_t size);
+#define ioremap_wc ioremap_wc
+#define ioremap_wt ioremap_wc
+
+void iounmap(volatile void __iomem *iomem_cookie);
+#define iounmap iounmap
 
 /*
  * io{read,write}{16,32}be() macros

arch/arm/include/asm/memory.h

@@ -275,7 +275,7 @@ static inline void *phys_to_virt(phys_addr_t x)
  */
 #define __pa(x)			__virt_to_phys((unsigned long)(x))
 #define __va(x)			((void *)__phys_to_virt((phys_addr_t)(x)))
-#define pfn_to_kaddr(pfn)	__va((pfn) << PAGE_SHIFT)
+#define pfn_to_kaddr(pfn)	__va((phys_addr_t)(pfn) << PAGE_SHIFT)
 
 extern phys_addr_t (*arch_virt_to_idmap)(unsigned long x);
 
@@ -286,7 +286,7 @@ extern phys_addr_t (*arch_virt_to_idmap)(unsigned long x);
  */
 static inline phys_addr_t __virt_to_idmap(unsigned long x)
 {
-	if (arch_virt_to_idmap)
+	if (IS_ENABLED(CONFIG_MMU) && arch_virt_to_idmap)
 		return arch_virt_to_idmap(x);
 	else
 		return __virt_to_phys(x);

arch/arm/include/asm/mm-arch-hooks.h

@@ -1,15 +0,0 @@
-/*
- * Architecture specific mm hooks
- *
- * Copyright (C) 2015, IBM Corporation
- * Author: Laurent Dufour <ldufour@linux.vnet.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _ASM_ARM_MM_ARCH_HOOKS_H
-#define _ASM_ARM_MM_ARCH_HOOKS_H
-
-#endif /* _ASM_ARM_MM_ARCH_HOOKS_H */

arch/arm/include/asm/pgtable-2level.h

@@ -129,7 +129,36 @@
 
 /*
  * These are the memory types, defined to be compatible with
- * pre-ARMv6 CPUs cacheable and bufferable bits:   XXCB
+ * pre-ARMv6 CPUs cacheable and bufferable bits: n/a,n/a,C,B
+ * ARMv6+ without TEX remapping, they are a table index.
+ * ARMv6+ with TEX remapping, they correspond to n/a,TEX(0),C,B
+ *
+ * MT type		Pre-ARMv6	ARMv6+ type / cacheable status
+ * UNCACHED		Uncached	Strongly ordered
+ * BUFFERABLE		Bufferable	Normal memory / non-cacheable
+ * WRITETHROUGH		Writethrough	Normal memory / write through
+ * WRITEBACK		Writeback	Normal memory / write back, read alloc
+ * MINICACHE		Minicache	N/A
+ * WRITEALLOC		Writeback	Normal memory / write back, write alloc
+ * DEV_SHARED		Uncached	Device memory (shared)
+ * DEV_NONSHARED	Uncached	Device memory (non-shared)
+ * DEV_WC		Bufferable	Normal memory / non-cacheable
+ * DEV_CACHED		Writeback	Normal memory / write back, read alloc
+ * VECTORS		Variable	Normal memory / variable
+ *
+ * All normal memory mappings have the following properties:
+ * - reads can be repeated with no side effects
+ * - repeated reads return the last value written
+ * - reads can fetch additional locations without side effects
+ * - writes can be repeated (in certain cases) with no side effects
+ * - writes can be merged before accessing the target
+ * - unaligned accesses can be supported
+ *
+ * All device mappings have the following properties:
+ * - no access speculation
+ * - no repetition (eg, on return from an exception)
+ * - number, order and size of accesses are maintained
+ * - unaligned accesses are "unpredictable"
  */
 #define L_PTE_MT_UNCACHED	(_AT(pteval_t, 0x00) << 2)	/* 0000 */
 #define L_PTE_MT_BUFFERABLE	(_AT(pteval_t, 0x01) << 2)	/* 0001 */

arch/arm/kernel/armksyms.c

@@ -50,6 +50,9 @@ extern void __aeabi_ulcmp(void);
 
 extern void fpundefinstr(void);
 
+void mmioset(void *, unsigned int, size_t);
+void mmiocpy(void *, const void *, size_t);
+
 	/* platform dependent support */
 EXPORT_SYMBOL(arm_delay_ops);
 
@@ -88,6 +91,9 @@ EXPORT_SYMBOL(memmove);
 EXPORT_SYMBOL(memchr);
 EXPORT_SYMBOL(__memzero);
 
+EXPORT_SYMBOL(mmioset);
+EXPORT_SYMBOL(mmiocpy);
+
 #ifdef CONFIG_MMU
 EXPORT_SYMBOL(copy_page);
 

arch/arm/kernel/entry-armv.S

@@ -410,7 +410,7 @@ ENDPROC(__fiq_abt)
 	zero_fp
 
 	.if	\trace
-#ifdef CONFIG_IRQSOFF_TRACER
+#ifdef CONFIG_TRACE_IRQFLAGS
 	bl	trace_hardirqs_off
 #endif
 	ct_user_exit save = 0

arch/arm/kernel/perf_event.c

@@ -818,12 +818,13 @@ static int of_pmu_irq_cfg(struct arm_pmu *pmu)
 			if (arch_find_n_match_cpu_physical_id(dn, cpu, NULL))
 				break;
 
-		of_node_put(dn);
 		if (cpu >= nr_cpu_ids) {
 			pr_warn("Failed to find logical CPU for %s\n",
 				dn->name);
+			of_node_put(dn);
 			break;
 		}
+		of_node_put(dn);
 
 		irqs[i] = cpu;
 		cpumask_set_cpu(cpu, &pmu->supported_cpus);

arch/arm/kernel/reboot.c

@@ -50,7 +50,7 @@ static void __soft_restart(void *addr)
 	flush_cache_all();
 
 	/* Switch to the identity mapping. */
-	phys_reset = (phys_reset_t)(unsigned long)virt_to_phys(cpu_reset);
+	phys_reset = (phys_reset_t)(unsigned long)virt_to_idmap(cpu_reset);
 	phys_reset((unsigned long)addr);
 
 	/* Should never get here. */

arch/arm/kernel/smp.c

@@ -578,7 +578,7 @@ void handle_IPI(int ipinr, struct pt_regs *regs)
 	struct pt_regs *old_regs = set_irq_regs(regs);
 
 	if ((unsigned)ipinr < NR_IPI) {
-		trace_ipi_entry(ipi_types[ipinr]);
+		trace_ipi_entry_rcuidle(ipi_types[ipinr]);
 		__inc_irq_stat(cpu, ipi_irqs[ipinr]);
 	}
 
@@ -637,7 +637,7 @@ void handle_IPI(int ipinr, struct pt_regs *regs)
 	}
 
 	if ((unsigned)ipinr < NR_IPI)
-		trace_ipi_exit(ipi_types[ipinr]);
+		trace_ipi_exit_rcuidle(ipi_types[ipinr]);
 	set_irq_regs(old_regs);
 }
 

arch/arm/lib/memcpy.S

@@ -61,8 +61,10 @@
 
 /* Prototype: void *memcpy(void *dest, const void *src, size_t n); */
 
+ENTRY(mmiocpy)
 ENTRY(memcpy)
 
 #include "copy_template.S"
 
 ENDPROC(memcpy)
+ENDPROC(mmiocpy)

arch/arm/lib/memset.S

@@ -16,6 +16,7 @@
 	.text
 	.align	5
 
+ENTRY(mmioset)
 ENTRY(memset)
 UNWIND( .fnstart         )
 	ands	r3, r0, #3		@ 1 unaligned?
@@ -133,3 +134,4 @@ UNWIND( .fnstart            )
 	b	1b
 UNWIND( .fnend   )
 ENDPROC(memset)
+ENDPROC(mmioset)

arch/arm/mach-imx/gpc.c

@@ -291,8 +291,6 @@ void __init imx_gpc_check_dt(void)
 	}
 }
 
-#ifdef CONFIG_PM_GENERIC_DOMAINS
-
 static void _imx6q_pm_pu_power_off(struct generic_pm_domain *genpd)
 {
 	int iso, iso2sw;
@@ -399,7 +397,6 @@ static struct genpd_onecell_data imx_gpc_onecell_data = {
 static int imx_gpc_genpd_init(struct device *dev, struct regulator *pu_reg)
 {
 	struct clk *clk;
-	bool is_off;
 	int i;
 
 	imx6q_pu_domain.reg = pu_reg;
@@ -416,18 +413,13 @@ static int imx_gpc_genpd_init(struct device *dev, struct regulator *pu_reg)
 	}
 	imx6q_pu_domain.num_clks = i;
 
-	is_off = IS_ENABLED(CONFIG_PM);
-	if (is_off) {
-		_imx6q_pm_pu_power_off(&imx6q_pu_domain.base);
-	} else {
-		/*
-		 * Enable power if compiled without CONFIG_PM in case the
-		 * bootloader disabled it.
-		 */
-		imx6q_pm_pu_power_on(&imx6q_pu_domain.base);
-	}
+	/* Enable power always in case bootloader disabled it. */
+	imx6q_pm_pu_power_on(&imx6q_pu_domain.base);
+
+	if (!IS_ENABLED(CONFIG_PM_GENERIC_DOMAINS))
+		return 0;
 
-	pm_genpd_init(&imx6q_pu_domain.base, NULL, is_off);
+	pm_genpd_init(&imx6q_pu_domain.base, NULL, false);
 	return of_genpd_add_provider_onecell(dev->of_node,
 					     &imx_gpc_onecell_data);
 
@@ -437,13 +429,6 @@ clk_err:
 	return -EINVAL;
 }
 
-#else
-static inline int imx_gpc_genpd_init(struct device *dev, struct regulator *reg)
-{
-	return 0;
-}
-#endif /* CONFIG_PM_GENERIC_DOMAINS */
-
 static int imx_gpc_probe(struct platform_device *pdev)
 {
 	struct regulator *pu_reg;

arch/arm/mach-omap2/Kconfig

@@ -60,6 +60,7 @@ config SOC_AM43XX
 	select ARM_GIC
 	select MACH_OMAP_GENERIC
 	select MIGHT_HAVE_CACHE_L2X0
+	select HAVE_ARM_SCU
 
 config SOC_DRA7XX
 	bool "TI DRA7XX"

arch/arm/mach-omap2/dma.c

@@ -117,7 +117,6 @@ static void omap2_show_dma_caps(void)
 	u8 revision = dma_read(REVISION, 0) & 0xff;
 	printk(KERN_INFO "OMAP DMA hardware revision %d.%d\n",
 				revision >> 4, revision & 0xf);
-	return;
 }
 
 static unsigned configure_dma_errata(void)

arch/arm/mach-prima2/Kconfig

@@ -4,6 +4,7 @@ menuconfig ARCH_SIRF
 	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_IRQ_CHIP
 	select NO_IOPORT_MAP
+	select REGMAP
 	select PINCTRL
 	select PINCTRL_SIRF
 	help

arch/arm/mach-prima2/rtciobrg.c

@@ -1,5 +1,5 @@
 /*
- * RTC I/O Bridge interfaces for CSR SiRFprimaII
+ * RTC I/O Bridge interfaces for CSR SiRFprimaII/atlas7
  * ARM access the registers of SYSRTC, GPSRTC and PWRC through this module
  *
  * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
@@ -10,6 +10,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/io.h>
+#include <linux/regmap.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_device.h>
@@ -66,6 +67,7 @@ u32 sirfsoc_rtc_iobrg_readl(u32 addr)
 {
 	unsigned long flags, val;
 
+	/* TODO: add hwspinlock to sync with M3 */
 	spin_lock_irqsave(&rtciobrg_lock, flags);
 
 	val = __sirfsoc_rtc_iobrg_readl(addr);
@@ -90,6 +92,7 @@ void sirfsoc_rtc_iobrg_writel(u32 val, u32 addr)
 {
 	unsigned long flags;
 
+	 /* TODO: add hwspinlock to sync with M3 */
 	spin_lock_irqsave(&rtciobrg_lock, flags);
 
 	sirfsoc_rtc_iobrg_pre_writel(val, addr);
@@ -102,6 +105,45 @@ void sirfsoc_rtc_iobrg_writel(u32 val, u32 addr)
 }
 EXPORT_SYMBOL_GPL(sirfsoc_rtc_iobrg_writel);
 
+
+static int regmap_iobg_regwrite(void *context, unsigned int reg,
+				   unsigned int val)
+{
+	sirfsoc_rtc_iobrg_writel(val, reg);
+	return 0;
+}
+
+static int regmap_iobg_regread(void *context, unsigned int reg,
+				  unsigned int *val)
+{
+	*val = (u32)sirfsoc_rtc_iobrg_readl(reg);
+	return 0;
+}
+
+static struct regmap_bus regmap_iobg = {
+	.reg_write = regmap_iobg_regwrite,
+	.reg_read = regmap_iobg_regread,
+};
+
+/**
+ * devm_regmap_init_iobg(): Initialise managed register map
+ *
+ * @iobg: Device that will be interacted with
+ * @config: Configuration for register map
+ *
+ * The return value will be an ERR_PTR() on error or a valid pointer
+ * to a struct regmap.  The regmap will be automatically freed by the
+ * device management code.
+ */
+struct regmap *devm_regmap_init_iobg(struct device *dev,
+				    const struct regmap_config *config)
+{
+	const struct regmap_bus *bus = &regmap_iobg;
+
+	return devm_regmap_init(dev, bus, dev, config);
+}
+EXPORT_SYMBOL_GPL(devm_regmap_init_iobg);
+
 static const struct of_device_id rtciobrg_ids[] = {
 	{ .compatible = "sirf,prima2-rtciobg" },
 	{}
@@ -132,7 +174,7 @@ static int __init sirfsoc_rtciobrg_init(void)
 }
 postcore_initcall(sirfsoc_rtciobrg_init);
 
-MODULE_AUTHOR("Zhiwu Song <zhiwu.song@csr.com>, "
-		"Barry Song <baohua.song@csr.com>");
+MODULE_AUTHOR("Zhiwu Song <zhiwu.song@csr.com>");
+MODULE_AUTHOR("Barry Song <baohua.song@csr.com>");
 MODULE_DESCRIPTION("CSR SiRFprimaII rtc io bridge");
 MODULE_LICENSE("GPL v2");

arch/arm/mach-pxa/capc7117.c

@@ -24,6 +24,7 @@
 #include <linux/ata_platform.h>
 #include <linux/serial_8250.h>
 #include <linux/gpio.h>
+#include <linux/regulator/machine.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -144,6 +145,8 @@ static void __init capc7117_init(void)
 
 	capc7117_uarts_init();
 	capc7117_ide_init();
+
+	regulator_has_full_constraints();
 }
 
 MACHINE_START(CAPC7117,

arch/arm/mach-pxa/cm-x2xx.c

@@ -13,6 +13,7 @@
 #include <linux/syscore_ops.h>
 #include <linux/irq.h>
 #include <linux/gpio.h>
+#include <linux/regulator/machine.h>
 
 #include <linux/dm9000.h>
 #include <linux/leds.h>
@@ -466,6 +467,8 @@ static void __init cmx2xx_init(void)
 	cmx2xx_init_ac97();
 	cmx2xx_init_touchscreen();
 	cmx2xx_init_leds();
+
+	regulator_has_full_constraints();
 }
 
 static void __init cmx2xx_init_irq(void)

arch/arm/mach-pxa/cm-x300.c

@@ -835,6 +835,8 @@ static void __init cm_x300_init(void)
 	cm_x300_init_ac97();
 	cm_x300_init_wi2wi();
 	cm_x300_init_bl();
+
+	regulator_has_full_constraints();
 }
 
 static void __init cm_x300_fixup(struct tag *tags, char **cmdline)

arch/arm/mach-pxa/colibri-pxa270.c

@@ -18,6 +18,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
+#include <linux/regulator/machine.h>
 #include <linux/ucb1400.h>
 
 #include <asm/mach/arch.h>
@@ -294,6 +295,8 @@ static void __init colibri_pxa270_init(void)
 		printk(KERN_ERR "Illegal colibri_pxa270_baseboard type %d\n",
 				colibri_pxa270_baseboard);
 	}
+
+	regulator_has_full_constraints();
 }
 
 /* The "Income s.r.o. SH-Dmaster PXA270 SBC" board can be booted either