Merge branch 'nfs-for-2.6.32' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6 into for-2.6.32-incoming

Conflicts:
	net/sunrpc/cache.c

.gitignore

@@ -27,6 +27,7 @@
 *.gz
 *.lzma
 *.patch
+*.gcno
 
 #
 # Top-level generic files

CREDITS

@@ -1856,7 +1856,7 @@ E: rfkoenig@immd4.informatik.uni-erlangen.de
 D: The Linux Support Team Erlangen
 
 N: Andreas Koensgen
-E: ajk@iehk.rwth-aachen.de
+E: ajk@comnets.uni-bremen.de
 D: 6pack driver for AX.25
 
 N: Harald Koerfgen
@@ -2006,6 +2006,9 @@ E: paul@laufernet.com
 D: Soundblaster driver fixes, ISAPnP quirk
 S: California, USA
 
+N: Jonathan Layes
+D: ARPD support
+
 N: Tom Lees
 E: tom@lpsg.demon.co.uk
 W: http://www.lpsg.demon.co.uk/
@@ -3802,6 +3805,9 @@ S: van Bronckhorststraat 12
 S: 2612 XV Delft
 S: The Netherlands
 
+N: Thomas Woller
+D: CS461x Cirrus Logic sound driver
+
 N: David Woodhouse
 E: dwmw2@infradead.org
 D: JFFS2 file system, Memory Technology Device subsystem,

Documentation/ABI/testing/sysfs-block

@@ -94,28 +94,37 @@ What:		/sys/block/<disk>/queue/physical_block_size
 Date:		May 2009
 Contact:	Martin K. Petersen <martin.petersen@oracle.com>
 Description:
-		This is the smallest unit the storage device can write
-		without resorting to read-modify-write operation.  It is
-		usually the same as the logical block size but may be
-		bigger.  One example is SATA drives with 4KB sectors
-		that expose a 512-byte logical block size to the
-		operating system.
+		This is the smallest unit a physical storage device can
+		write atomically.  It is usually the same as the logical
+		block size but may be bigger.  One example is SATA
+		drives with 4KB sectors that expose a 512-byte logical
+		block size to the operating system.  For stacked block
+		devices the physical_block_size variable contains the
+		maximum physical_block_size of the component devices.
 
 What:		/sys/block/<disk>/queue/minimum_io_size
 Date:		April 2009
 Contact:	Martin K. Petersen <martin.petersen@oracle.com>
 Description:
-		Storage devices may report a preferred minimum I/O size,
-		which is the smallest request the device can perform
-		without incurring a read-modify-write penalty.  For disk
-		drives this is often the physical block size.  For RAID
-		arrays it is often the stripe chunk size.
+		Storage devices may report a granularity or preferred
+		minimum I/O size which is the smallest request the
+		device can perform without incurring a performance
+		penalty.  For disk drives this is often the physical
+		block size.  For RAID arrays it is often the stripe
+		chunk size.  A properly aligned multiple of
+		minimum_io_size is the preferred request size for
+		workloads where a high number of I/O operations is
+		desired.
 
 What:		/sys/block/<disk>/queue/optimal_io_size
 Date:		April 2009
 Contact:	Martin K. Petersen <martin.petersen@oracle.com>
 Description:
 		Storage devices may report an optimal I/O size, which is
-		the device's preferred unit of receiving I/O.  This is
-		rarely reported for disk drives.  For RAID devices it is
-		usually the stripe width or the internal block size.
+		the device's preferred unit for sustained I/O.  This is
+		rarely reported for disk drives.  For RAID arrays it is
+		usually the stripe width or the internal track size.  A
+		properly aligned multiple of optimal_io_size is the
+		preferred request size for workloads where sustained
+		throughput is desired.  If no optimal I/O size is
+		reported this file contains 0.

Documentation/DocBook/kernel-hacking.tmpl

@@ -449,8 +449,8 @@ printk(KERN_INFO "i = %u\n", i);
    </para>
 
    <programlisting>
-__u32 ipaddress;
-printk(KERN_INFO "my ip: %d.%d.%d.%d\n", NIPQUAD(ipaddress));
+__be32 ipaddress;
+printk(KERN_INFO "my ip: %pI4\n", &amp;ipaddress);
    </programlisting>
 
    <para>

Documentation/DocBook/mac80211.tmpl

@@ -184,8 +184,6 @@ usage should require reading the full document.
 !Finclude/net/mac80211.h ieee80211_ctstoself_get
 !Finclude/net/mac80211.h ieee80211_ctstoself_duration
 !Finclude/net/mac80211.h ieee80211_generic_frame_duration
-!Finclude/net/mac80211.h ieee80211_get_hdrlen_from_skb
-!Finclude/net/mac80211.h ieee80211_hdrlen
 !Finclude/net/mac80211.h ieee80211_wake_queue
 !Finclude/net/mac80211.h ieee80211_stop_queue
 !Finclude/net/mac80211.h ieee80211_wake_queues

Documentation/RCU/rculist_nulls.txt

@@ -83,11 +83,12 @@ not detect it missed following items in original chain.
 obj = kmem_cache_alloc(...);
 lock_chain(); // typically a spin_lock()
 obj->key = key;
-atomic_inc(&obj->refcnt);
 /*
  * we need to make sure obj->key is updated before obj->next
+ * or obj->refcnt
  */
 smp_wmb();
+atomic_set(&obj->refcnt, 1);
 hlist_add_head_rcu(&obj->obj_node, list);
 unlock_chain(); // typically a spin_unlock()
 
@@ -159,6 +160,10 @@ out:
 obj = kmem_cache_alloc(cachep);
 lock_chain(); // typically a spin_lock()
 obj->key = key;
+/*
+ * changes to obj->key must be visible before refcnt one
+ */
+smp_wmb();
 atomic_set(&obj->refcnt, 1);
 /*
  * insert obj in RCU way (readers might be traversing chain)

Documentation/arm/memory.txt

@@ -21,6 +21,8 @@ ffff8000	ffffffff	copy_user_page / clear_user_page use.
 				For SA11xx and Xscale, this is used to
 				setup a minicache mapping.
 
+ffff4000	ffffffff	cache aliasing on ARMv6 and later CPUs.
+
 ffff1000	ffff7fff	Reserved.
 				Platforms must not use this address range.
 

Documentation/block/data-integrity.txt

@@ -50,7 +50,7 @@ encouraged them to allow separation of the data and integrity metadata
 scatter-gather lists.
 
 The controller will interleave the buffers on write and split them on
-read.  This means that the Linux can DMA the data buffers to and from
+read.  This means that Linux can DMA the data buffers to and from
 host memory without changes to the page cache.
 
 Also, the 16-bit CRC checksum mandated by both the SCSI and SATA specs
@@ -66,7 +66,7 @@ software RAID5).
 
 The IP checksum is weaker than the CRC in terms of detecting bit
 errors.  However, the strength is really in the separation of the data
-buffers and the integrity metadata.  These two distinct buffers much
+buffers and the integrity metadata.  These two distinct buffers must
 match up for an I/O to complete.
 
 The separation of the data and integrity metadata buffers as well as

Documentation/cgroups/cpusets.txt

@@ -777,6 +777,18 @@ in cpuset directories:
 # /bin/echo 1-4 > cpus		-> set cpus list to cpus 1,2,3,4
 # /bin/echo 1,2,3,4 > cpus	-> set cpus list to cpus 1,2,3,4
 
+To add a CPU to a cpuset, write the new list of CPUs including the
+CPU to be added. To add 6 to the above cpuset:
+
+# /bin/echo 1-4,6 > cpus	-> set cpus list to cpus 1,2,3,4,6
+
+Similarly to remove a CPU from a cpuset, write the new list of CPUs
+without the CPU to be removed.
+
+To remove all the CPUs:
+
+# /bin/echo "" > cpus		-> clear cpus list
+
 2.3 Setting flags
 -----------------
 

Documentation/connector/cn_test.c

@@ -1,7 +1,7 @@
 /*
  * 	cn_test.c
  * 
- * 2004-2005 Copyright (c) Evgeniy Polyakov <johnpol@2ka.mipt.ru>
+ * 2004+ Copyright (c) Evgeniy Polyakov <zbr@ioremap.net>
  * All rights reserved.
  * 
  * This program is free software; you can redistribute it and/or modify
@@ -194,5 +194,5 @@ module_init(cn_test_init);
 module_exit(cn_test_fini);
 
 MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Evgeniy Polyakov <johnpol@2ka.mipt.ru>");
+MODULE_AUTHOR("Evgeniy Polyakov <zbr@ioremap.net>");
 MODULE_DESCRIPTION("Connector's test module");

Documentation/connector/ucon.c

@@ -1,7 +1,7 @@
 /*
  * 	ucon.c
  *
- * Copyright (c) 2004+ Evgeniy Polyakov <johnpol@2ka.mipt.ru>
+ * Copyright (c) 2004+ Evgeniy Polyakov <zbr@ioremap.net>
  *
  *
  * This program is free software; you can redistribute it and/or modify

Documentation/driver-model/driver.txt

@@ -207,8 +207,8 @@ Attributes
 ~~~~~~~~~~
 struct driver_attribute {
         struct attribute        attr;
-        ssize_t (*show)(struct device_driver *, char * buf, size_t count, loff_t off);
-        ssize_t (*store)(struct device_driver *, const char * buf, size_t count, loff_t off);
+        ssize_t (*show)(struct device_driver *driver, char *buf);
+        ssize_t (*store)(struct device_driver *, const char * buf, size_t count);
 };
 
 Device drivers can export attributes via their sysfs directories. 

Documentation/dvb/get_dvb_firmware

@@ -25,7 +25,7 @@ use IO::Handle;
 		"tda10046lifeview", "av7110", "dec2000t", "dec2540t",
 		"dec3000s", "vp7041", "dibusb", "nxt2002", "nxt2004",
 		"or51211", "or51132_qam", "or51132_vsb", "bluebird",
-		"opera1", "cx231xx", "cx18", "cx23885", "pvrusb2" );
+		"opera1", "cx231xx", "cx18", "cx23885", "pvrusb2", "mpc718" );
 
 # Check args
 syntax() if (scalar(@ARGV) != 1);
@@ -381,6 +381,57 @@ sub cx18 {
     $allfiles;
 }
 
+sub mpc718 {
+    my $archive = 'Yuan MPC718 TV Tuner Card 2.13.10.1016.zip';
+    my $url = "ftp://ftp.work.acer-euro.com/desktop/aspire_idea510/vista/Drivers/$archive";
+    my $fwfile = "dvb-cx18-mpc718-mt352.fw";
+    my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
+
+    checkstandard();
+    wgetfile($archive, $url);
+    unzip($archive, $tmpdir);
+
+    my $sourcefile = "$tmpdir/Yuan MPC718 TV Tuner Card 2.13.10.1016/mpc718_32bit/yuanrap.sys";
+    my $found = 0;
+
+    open IN, '<', $sourcefile or die "Couldn't open $sourcefile to extract $fwfile data\n";
+    binmode IN;
+    open OUT, '>', $fwfile;
+    binmode OUT;
+    {
+	# Block scope because we change the line terminator variable $/
+	my $prevlen = 0;
+	my $currlen;
+
+	# Buried in the data segment are 3 runs of almost identical
+	# register-value pairs that end in 0x5d 0x01 which is a "TUNER GO"
+	# command for the MT352.
+	# Pull out the middle run (because it's easy) of register-value
+	# pairs to make the "firmware" file.
+
+	local $/ = "\x5d\x01"; # MT352 "TUNER GO"
+
+	while (<IN>) {
+	    $currlen = length($_);
+	    if ($prevlen == $currlen && $currlen <= 64) {
+		chop; chop; # Get rid of "TUNER GO"
+		s/^\0\0//;  # get rid of leading 00 00 if it's there
+		printf OUT "$_";
+		$found = 1;
+		last;
+	    }
+	    $prevlen = $currlen;
+	}
+    }
+    close OUT;
+    close IN;
+    if (!$found) {
+	unlink $fwfile;
+	die "Couldn't find valid register-value sequence in $sourcefile for $fwfile\n";
+    }
+    $fwfile;
+}
+
 sub cx23885 {
     my $url = "http://linuxtv.org/downloads/firmware/";
 

Documentation/feature-removal-schedule.txt

@@ -458,3 +458,13 @@ Why:	Remove the old legacy 32bit machine check code. This has been
 	but the old version has been kept around for easier testing. Note this
 	doesn't impact the old P5 and WinChip machine check handlers.
 Who:	Andi Kleen <andi@firstfloor.org>
+
+----------------------------
+
+What:	lock_policy_rwsem_* and unlock_policy_rwsem_* will not be
+	exported interface anymore.
+When:	2.6.33
+Why:	cpu_policy_rwsem has a new cleaner definition making it local to
+	cpufreq core and contained inside cpufreq.c. Other dependent
+	drivers should not use it in order to safely avoid lockdep issues.
+Who:	Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>

Documentation/filesystems/nfs.txt

@@ -0,0 +1,98 @@
+
+The NFS client
+==============
+
+The NFS version 2 protocol was first documented in RFC1094 (March 1989).
+Since then two more major releases of NFS have been published, with NFSv3
+being documented in RFC1813 (June 1995), and NFSv4 in RFC3530 (April
+2003).
+
+The Linux NFS client currently supports all the above published versions,
+and work is in progress on adding support for minor version 1 of the NFSv4
+protocol.
+
+The purpose of this document is to provide information on some of the
+upcall interfaces that are used in order to provide the NFS client with
+some of the information that it requires in order to fully comply with
+the NFS spec.
+
+The DNS resolver
+================
+
+NFSv4 allows for one server to refer the NFS client to data that has been
+migrated onto another server by means of the special "fs_locations"
+attribute. See
+	http://tools.ietf.org/html/rfc3530#section-6
+and
+	http://tools.ietf.org/html/draft-ietf-nfsv4-referrals-00
+
+The fs_locations information can take the form of either an ip address and
+a path, or a DNS hostname and a path. The latter requires the NFS client to
+do a DNS lookup in order to mount the new volume, and hence the need for an
+upcall to allow userland to provide this service.
+
+Assuming that the user has the 'rpc_pipefs' filesystem mounted in the usual
+/var/lib/nfs/rpc_pipefs, the upcall consists of the following steps:
+
+   (1) The process checks the dns_resolve cache to see if it contains a
+       valid entry. If so, it returns that entry and exits.
+
+   (2) If no valid entry exists, the helper script '/sbin/nfs_cache_getent'
+       (may be changed using the 'nfs.cache_getent' kernel boot parameter)
+       is run, with two arguments:
+		- the cache name, "dns_resolve"
+		- the hostname to resolve
+
+   (3) After looking up the corresponding ip address, the helper script
+       writes the result into the rpc_pipefs pseudo-file
+       '/var/lib/nfs/rpc_pipefs/cache/dns_resolve/channel'
+       in the following (text) format:
+
+		"<ip address> <hostname> <ttl>\n"
+
+       Where <ip address> is in the usual IPv4 (123.456.78.90) or IPv6
+       (ffee:ddcc:bbaa:9988:7766:5544:3322:1100, ffee::1100, ...) format.
+       <hostname> is identical to the second argument of the helper
+       script, and <ttl> is the 'time to live' of this cache entry (in
+       units of seconds).
+
+       Note: If <ip address> is invalid, say the string "0", then a negative
+       entry is created, which will cause the kernel to treat the hostname
+       as having no valid DNS translation.
+
+
+
+
+A basic sample /sbin/nfs_cache_getent
+=====================================
+
+#!/bin/bash
+#
+ttl=600
+#
+cut=/usr/bin/cut
+getent=/usr/bin/getent
+rpc_pipefs=/var/lib/nfs/rpc_pipefs
+#
+die()
+{
+	echo "Usage: $0 cache_name entry_name"
+	exit 1
+}
+
+[ $# -lt 2 ] && die
+cachename="$1"
+cache_path=${rpc_pipefs}/cache/${cachename}/channel
+
+case "${cachename}" in
+	dns_resolve)
+		name="$2"
+		result="$(${getent} hosts ${name} | ${cut} -f1 -d\ )"
+		[ -z "${result}" ] && result="0"
+		;;
+	*)
+		die
+		;;
+esac
+echo "${result} ${name} ${ttl}" >${cache_path}
+

Documentation/filesystems/sysfs.txt

@@ -23,7 +23,8 @@ interface.
 Using sysfs
 ~~~~~~~~~~~
 
-sysfs is always compiled in. You can access it by doing:
+sysfs is always compiled in if CONFIG_SYSFS is defined. You can access
+it by doing:
 
     mount -t sysfs sysfs /sys 
 

Documentation/gcov.txt

@@ -188,13 +188,18 @@ Solution: Exclude affected source files from profiling by specifying
           GCOV_PROFILE := n or GCOV_PROFILE_basename.o := n in the
           corresponding Makefile.
 
+Problem:  Files copied from sysfs appear empty or incomplete.
+Cause:    Due to the way seq_file works, some tools such as cp or tar
+          may not correctly copy files from sysfs.
+Solution: Use 'cat' to read .gcda files and 'cp -d' to copy links.
+          Alternatively use the mechanism shown in Appendix B.
+
 
 Appendix A: gather_on_build.sh
 ==============================
 
 Sample script to gather coverage meta files on the build machine
 (see 6a):
-
 #!/bin/bash
 
 KSRC=$1
@@ -226,7 +231,7 @@ Appendix B: gather_on_test.sh
 Sample script to gather coverage data files on the test machine
 (see 6b):
 
-#!/bin/bash
+#!/bin/bash -e
 
 DEST=$1
 GCDA=/sys/kernel/debug/gcov
@@ -236,11 +241,13 @@ if [ -z "$DEST" ] ; then
   exit 1
 fi
 
-find $GCDA -name '*.gcno' -o -name '*.gcda' | tar cfz $DEST -T -
+TEMPDIR=$(mktemp -d)
+echo Collecting data..
+find $GCDA -type d -exec mkdir -p $TEMPDIR/\{\} \;
+find $GCDA -name '*.gcda' -exec sh -c 'cat < $0 > '$TEMPDIR'/$0' {} \;
+find $GCDA -name '*.gcno' -exec sh -c 'cp -d $0 '$TEMPDIR'/$0' {} \;
+tar czf $DEST -C $TEMPDIR sys
+rm -rf $TEMPDIR
 
-if [ $? -eq 0 ] ; then
-  echo "$DEST successfully created, copy to build system and unpack with:"
-  echo "  tar xfz $DEST"
-else
-  echo "Could not create file $DEST"
-fi
+echo "$DEST successfully created, copy to build system and unpack with:"
+echo "  tar xfz $DEST"

Documentation/ioctl/ioctl-number.txt

@@ -139,6 +139,7 @@ Code	Seq#	Include File		Comments
 'm'	all	linux/synclink.h	conflict!
 'm'	00-1F	net/irda/irmod.h	conflict!
 'n'	00-7F	linux/ncp_fs.h
+'n'	80-8F	linux/nilfs2_fs.h	NILFS2
 'n'	E0-FF	video/matrox.h          matroxfb
 'o'	00-1F	fs/ocfs2/ocfs2_fs.h	OCFS2
 'o'     00-03   include/mtd/ubi-user.h  conflict! (OCFS2 and UBI overlaps)

Documentation/kernel-parameters.txt

@@ -1115,6 +1115,10 @@ and is between 256 and 4096 characters. It is defined in the file
 			libata.dma=4	  Compact Flash DMA only 
 			Combinations also work, so libata.dma=3 enables DMA
 			for disks and CDROMs, but not CFs.
+	
+	libata.ignore_hpa=	[LIBATA] Ignore HPA limit
+			libata.ignore_hpa=0	  keep BIOS limits (default)
+			libata.ignore_hpa=1	  ignore limits, using full disk
 
 	libata.noacpi	[LIBATA] Disables use of ACPI in libata suspend/resume
 			when set.
@@ -1499,6 +1503,14 @@ and is between 256 and 4096 characters. It is defined in the file
 			[NFS] set the TCP port on which the NFSv4 callback
 			channel should listen.
 
+	nfs.cache_getent=
+			[NFS] sets the pathname to the program which is used
+			to update the NFS client cache entries.
+
+	nfs.cache_getent_timeout=
+			[NFS] sets the timeout after which an attempt to
+			update a cache entry is deemed to have failed.
+
 	nfs.idmap_cache_timeout=
 			[NFS] set the maximum lifetime for idmapper cache
 			entries.
@@ -1720,8 +1732,8 @@ and is between 256 and 4096 characters. It is defined in the file
 	oprofile.cpu_type=	Force an oprofile cpu type
 			This might be useful if you have an older oprofile
 			userland or if you want common events.
-			Format: { archperfmon }
-			archperfmon: [X86] Force use of architectural
+			Format: { arch_perfmon }
+			arch_perfmon: [X86] Force use of architectural
 				perfmon on Intel CPUs instead of the
 				CPU specific event set.
 
@@ -1915,6 +1927,12 @@ and is between 256 and 4096 characters. It is defined in the file
 			Format: { 0 | 1 }
 			See arch/parisc/kernel/pdc_chassis.c
 
+	percpu_alloc=	[X86] Select which percpu first chunk allocator to use.
+			Allowed values are one of "lpage", "embed" and "4k".
+			See comments in arch/x86/kernel/setup_percpu.c for
+			details on each allocator.  This parameter is primarily
+			for debugging and performance comparison.
+
 	pf.		[PARIDE]
 			See Documentation/blockdev/paride.txt.
 
@@ -2385,6 +2403,18 @@ and is between 256 and 4096 characters. It is defined in the file
 	stifb=		[HW]
 			Format: bpp:<bpp1>[:<bpp2>[:<bpp3>...]]
 
+	sunrpc.min_resvport=
+	sunrpc.max_resvport=
+			[NFS,SUNRPC]
+			SunRPC servers often require that client requests
+			originate from a privileged port (i.e. a port in the
+			range 0 < portnr < 1024).
+			An administrator who wishes to reserve some of these
+			ports for other uses may adjust the range that the
+			kernel's sunrpc client considers to be privileged
+			using these two parameters to set the minimum and
+			maximum port values.
+
 	sunrpc.pool_mode=
 			[NFS]
 			Control how the NFS server code allocates CPUs to
@@ -2401,6 +2431,15 @@ and is between 256 and 4096 characters. It is defined in the file
 			pernode	    one pool for each NUMA node (equivalent
 				    to global on non-NUMA machines)
 
+	sunrpc.tcp_slot_table_entries=
+	sunrpc.udp_slot_table_entries=
+			[NFS,SUNRPC]
+			Sets the upper limit on the number of simultaneous
+			RPC calls that can be sent from the client to a
+			server. Increasing these values may allow you to
+			improve throughput, but will also increase the
+			amount of memory reserved for use by the client.
+
 	swiotlb=	[IA-64] Number of I/O TLB slabs
 
 	switches=	[HW,M68k]
@@ -2467,7 +2506,8 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	tp720=		[HW,PS2]
 
-	trace_buf_size=nn[KMG] [ftrace] will set tracing buffer size.
+	trace_buf_size=nn[KMG]
+			[FTRACE] will set tracing buffer size.
 
 	trix=		[HW,OSS] MediaTrix AudioTrix Pro
 			Format:

Documentation/kmemleak.txt

@@ -16,13 +16,17 @@ Usage
 -----
 
 CONFIG_DEBUG_KMEMLEAK in "Kernel hacking" has to be enabled. A kernel
-thread scans the memory every 10 minutes (by default) and prints any new
-unreferenced objects found. To trigger an intermediate scan and display
-all the possible memory leaks:
+thread scans the memory every 10 minutes (by default) and prints the
+number of new unreferenced objects found. To display the details of all
+the possible memory leaks:
 
   # mount -t debugfs nodev /sys/kernel/debug/
   # cat /sys/kernel/debug/kmemleak
 
+To trigger an intermediate memory scan:
+
+  # echo scan > /sys/kernel/debug/kmemleak
+
 Note that the orphan objects are listed in the order they were allocated
 and one object at the beginning of the list may cause other subsequent
 objects to be reported as orphan.
@@ -31,16 +35,21 @@ Memory scanning parameters can be modified at run-time by writing to the
 /sys/kernel/debug/kmemleak file. The following parameters are supported:
 
   off		- disable kmemleak (irreversible)
-  stack=on	- enable the task stacks scanning
+  stack=on	- enable the task stacks scanning (default)
   stack=off	- disable the tasks stacks scanning
-  scan=on	- start the automatic memory scanning thread
+  scan=on	- start the automatic memory scanning thread (default)
   scan=off	- stop the automatic memory scanning thread
-  scan=<secs>	- set the automatic memory scanning period in seconds (0
-		  to disable it)
+  scan=<secs>	- set the automatic memory scanning period in seconds
+		  (default 600, 0 to stop the automatic scanning)
+  scan		- trigger a memory scan
 
 Kmemleak can also be disabled at boot-time by passing "kmemleak=off" on
 the kernel command line.
 
+Memory may be allocated or freed before kmemleak is initialised and
+these actions are stored in an early log buffer. The size of this buffer
+is configured via the CONFIG_DEBUG_KMEMLEAK_EARLY_LOG_SIZE option.
+
 Basic Algorithm
 ---------------
 

Documentation/laptops/thinkpad-acpi.txt

@@ -36,8 +36,6 @@ detailed description):
 	- Bluetooth enable and disable
 	- video output switching, expansion control
 	- ThinkLight on and off
-	- limited docking and undocking
-	- UltraBay eject
 	- CMOS/UCMS control
 	- LED control
 	- ACPI sounds
@@ -729,131 +727,6 @@ cannot be read or if it is unknown, thinkpad-acpi will report it as "off".
 It is impossible to know if the status returned through sysfs is valid.
 
 
-Docking / undocking -- /proc/acpi/ibm/dock
-------------------------------------------
-
-Docking and undocking (e.g. with the X4 UltraBase) requires some
-actions to be taken by the operating system to safely make or break
-the electrical connections with the dock.
-
-The docking feature of this driver generates the following ACPI events:
-
-	ibm/dock GDCK 00000003 00000001 -- eject request
-	ibm/dock GDCK 00000003 00000002 -- undocked
-	ibm/dock GDCK 00000000 00000003 -- docked
-
-NOTE: These events will only be generated if the laptop was docked
-when originally booted. This is due to the current lack of support for
-hot plugging of devices in the Linux ACPI framework. If the laptop was
-booted while not in the dock, the following message is shown in the
-logs:
-
-	Mar 17 01:42:34 aero kernel: thinkpad_acpi: dock device not present
-
-In this case, no dock-related events are generated but the dock and
-undock commands described below still work. They can be executed
-manually or triggered by Fn key combinations (see the example acpid
-configuration files included in the driver tarball package available
-on the web site).
-
-When the eject request button on the dock is pressed, the first event
-above is generated. The handler for this event should issue the
-following command:
-
-	echo undock > /proc/acpi/ibm/dock
-
-After the LED on the dock goes off, it is safe to eject the laptop.
-Note: if you pressed this key by mistake, go ahead and eject the
-laptop, then dock it back in. Otherwise, the dock may not function as
-expected.
-
-When the laptop is docked, the third event above is generated. The
-handler for this event should issue the following command to fully
-enable the dock:
-
-	echo dock > /proc/acpi/ibm/dock
-
-The contents of the /proc/acpi/ibm/dock file shows the current status
-of the dock, as provided by the ACPI framework.
-
-The docking support in this driver does not take care of enabling or
-disabling any other devices you may have attached to the dock. For
-example, a CD drive plugged into the UltraBase needs to be disabled or
-enabled separately. See the provided example acpid configuration files
-for how this can be accomplished.
-
-There is no support yet for PCI devices that may be attached to a
-docking station, e.g. in the ThinkPad Dock II. The driver currently
-does not recognize, enable or disable such devices. This means that
-the only docking stations currently supported are the X-series
-UltraBase docks and "dumb" port replicators like the Mini Dock (the
-latter don't need any ACPI support, actually).
-
-
-UltraBay eject -- /proc/acpi/ibm/bay
-------------------------------------
-
-Inserting or ejecting an UltraBay device requires some actions to be
-taken by the operating system to safely make or break the electrical
-connections with the device.
-
-This feature generates the following ACPI events:
-
-	ibm/bay MSTR 00000003 00000000 -- eject request
-	ibm/bay MSTR 00000001 00000000 -- eject lever inserted
-
-NOTE: These events will only be generated if the UltraBay was present
-when the laptop was originally booted (on the X series, the UltraBay
-is in the dock, so it may not be present if the laptop was undocked).
-This is due to the current lack of support for hot plugging of devices
-in the Linux ACPI framework. If the laptop was booted without the
-UltraBay, the following message is shown in the logs:
-
-	Mar 17 01:42:34 aero kernel: thinkpad_acpi: bay device not present
-
-In this case, no bay-related events are generated but the eject
-command described below still works. It can be executed manually or
-triggered by a hot key combination.
-
-Sliding the eject lever generates the first event shown above. The
-handler for this event should take whatever actions are necessary to
-shut down the device in the UltraBay (e.g. call idectl), then issue
-the following command:
-
-	echo eject > /proc/acpi/ibm/bay
-
-After the LED on the UltraBay goes off, it is safe to pull out the
-device.
-
-When the eject lever is inserted, the second event above is
-generated. The handler for this event should take whatever actions are
-necessary to enable the UltraBay device (e.g. call idectl).
-
-The contents of the /proc/acpi/ibm/bay file shows the current status
-of the UltraBay, as provided by the ACPI framework.
-
-EXPERIMENTAL warm eject support on the 600e/x, A22p and A3x (To use
-this feature, you need to supply the experimental=1 parameter when
-loading the module):
-
-These models do not have a button near the UltraBay device to request
-a hot eject but rather require the laptop to be put to sleep
-(suspend-to-ram) before the bay device is ejected or inserted).
-The sequence of steps to eject the device is as follows:
-
-	echo eject > /proc/acpi/ibm/bay
-	put the ThinkPad to sleep
-	remove the drive
-	resume from sleep
-	cat /proc/acpi/ibm/bay should show that the drive was removed
-
-On the A3x, both the UltraBay 2000 and UltraBay Plus devices are
-supported. Use "eject2" instead of "eject" for the second bay.
-
-Note: the UltraBay eject support on the 600e/x, A22p and A3x is
-EXPERIMENTAL and may not work as expected. USE WITH CAUTION!
-
-
 CMOS/UCMS control
 -----------------
 

Documentation/leds-lp3944.txt

@@ -0,0 +1,50 @@
+Kernel driver lp3944
+====================
+
+  * National Semiconductor LP3944 Fun-light Chip
+    Prefix: 'lp3944'
+    Addresses scanned: None (see the Notes section below)
+    Datasheet: Publicly available at the National Semiconductor website
+               http://www.national.com/pf/LP/LP3944.html
+
+Authors:
+        Antonio Ospite <ospite@studenti.unina.it>
+
+
+Description
+-----------
+The LP3944 is a helper chip that can drive up to 8 leds, with two programmable
+DIM modes; it could even be used as a gpio expander but this driver assumes it
+is used as a led controller.
+
+The DIM modes are used to set _blink_ patterns for leds, the pattern is
+specified supplying two parameters:
+  - period: from 0s to 1.6s
+  - duty cycle: percentage of the period the led is on, from 0 to 100
+
+Setting a led in DIM0 or DIM1 mode makes it blink according to the pattern.
+See the datasheet for details.
+
+LP3944 can be found on Motorola A910 smartphone, where it drives the rgb
+leds, the camera flash light and the lcds power.
+
+
+Notes
+-----
+The chip is used mainly in embedded contexts, so this driver expects it is
+registered using the i2c_board_info mechanism.
+
+To register the chip at address 0x60 on adapter 0, set the platform data
+according to include/linux/leds-lp3944.h, set the i2c board info:
+
+	static struct i2c_board_info __initdata a910_i2c_board_info[] = {
+		{
+			I2C_BOARD_INFO("lp3944", 0x60),
+			.platform_data = &a910_lp3944_leds,
+		},
+	};
+
+and register it in the platform init function
+
+	i2c_register_board_info(0, a910_i2c_board_info,
+			ARRAY_SIZE(a910_i2c_board_info));

Documentation/lguest/lguest.c

@@ -1,7 +1,9 @@
-/*P:100 This is the Launcher code, a simple program which lays out the
- * "physical" memory for the new Guest by mapping the kernel image and
- * the virtual devices, then opens /dev/lguest to tell the kernel
- * about the Guest and control it. :*/
+/*P:100
+ * This is the Launcher code, a simple program which lays out the "physical"
+ * memory for the new Guest by mapping the kernel image and the virtual
+ * devices, then opens /dev/lguest to tell the kernel about the Guest and
+ * control it.
+:*/
 #define _LARGEFILE64_SOURCE
 #define _GNU_SOURCE
 #include <stdio.h>
@@ -46,13 +48,15 @@
 #include "linux/virtio_rng.h"
 #include "linux/virtio_ring.h"
 #include "asm/bootparam.h"
-/*L:110 We can ignore the 39 include files we need for this program, but I do
- * want to draw attention to the use of kernel-style types.
+/*L:110
+ * We can ignore the 42 include files we need for this program, but I do want
+ * to draw attention to the use of kernel-style types.
  *
  * As Linus said, "C is a Spartan language, and so should your naming be."  I
  * like these abbreviations, so we define them here.  Note that u64 is always
  * unsigned long long, which works on all Linux systems: this means that we can
- * use %llu in printf for any u64. */
+ * use %llu in printf for any u64.
+ */
 typedef unsigned long long u64;
 typedef uint32_t u32;
 typedef uint16_t u16;
@@ -69,8 +73,10 @@ typedef uint8_t u8;
 /* This will occupy 3 pages: it must be a power of 2. */
 #define VIRTQUEUE_NUM 256
 
-/*L:120 verbose is both a global flag and a macro.  The C preprocessor allows
- * this, and although I wouldn't recommend it, it works quite nicely here. */
+/*L:120
+ * verbose is both a global flag and a macro.  The C preprocessor allows
+ * this, and although I wouldn't recommend it, it works quite nicely here.
+ */
 static bool verbose;
 #define verbose(args...) \
 	do { if (verbose) printf(args); } while(0)
@@ -87,8 +93,7 @@ static int lguest_fd;
 static unsigned int __thread cpu_id;
 
 /* This is our list of devices. */
-struct device_list
-{
+struct device_list {
 	/* Counter to assign interrupt numbers. */
 	unsigned int next_irq;
 
@@ -100,8 +105,7 @@ struct device_list
 
 	/* A single linked list of devices. */
 	struct device *dev;
-	/* And a pointer to the last device for easy append and also for
-	 * configuration appending. */
+	/* And a pointer to the last device for easy append. */
 	struct device *lastdev;
 };
 
@@ -109,8 +113,7 @@ struct device_list
 static struct device_list devices;
 
 /* The device structure describes a single device. */
-struct device
-{
+struct device {
 	/* The linked-list pointer. */
 	struct device *next;
 
@@ -135,8 +138,7 @@ struct device
 };
 
 /* The virtqueue structure describes a queue attached to a device. */
-struct virtqueue
-{
+struct virtqueue {
 	struct virtqueue *next;
 
 	/* Which device owns me. */
@@ -168,20 +170,24 @@ static char **main_args;
 /* The original tty settings to restore on exit. */
 static struct termios orig_term;
 
-/* We have to be careful with barriers: our devices are all run in separate
+/*
+ * We have to be careful with barriers: our devices are all run in separate
  * threads and so we need to make sure that changes visible to the Guest happen
- * in precise order. */
+ * in precise order.
+ */
 #define wmb() __asm__ __volatile__("" : : : "memory")
 #define mb() __asm__ __volatile__("" : : : "memory")
 
-/* Convert an iovec element to the given type.
+/*
+ * Convert an iovec element to the given type.
  *
  * This is a fairly ugly trick: we need to know the size of the type and
  * alignment requirement to check the pointer is kosher.  It's also nice to
  * have the name of the type in case we report failure.
  *
  * Typing those three things all the time is cumbersome and error prone, so we
- * have a macro which sets them all up and passes to the real function. */
+ * have a macro which sets them all up and passes to the real function.
+ */
 #define convert(iov, type) \
 	((type *)_convert((iov), sizeof(type), __alignof__(type), #type))
 
@@ -198,8 +204,10 @@ static void *_convert(struct iovec *iov, size_t size, size_t align,
 /* Wrapper for the last available index.  Makes it easier to change. */
 #define lg_last_avail(vq)	((vq)->last_avail_idx)
 
-/* The virtio configuration space is defined to be little-endian.  x86 is
- * little-endian too, but it's nice to be explicit so we have these helpers. */
+/*
+ * The virtio configuration space is defined to be little-endian.  x86 is
+ * little-endian too, but it's nice to be explicit so we have these helpers.
+ */
 #define cpu_to_le16(v16) (v16)
 #define cpu_to_le32(v32) (v32)
 #define cpu_to_le64(v64) (v64)
@@ -241,11 +249,12 @@ static u8 *get_feature_bits(struct device *dev)
 		+ dev->num_vq * sizeof(struct lguest_vqconfig);
 }
 
-/*L:100 The Launcher code itself takes us out into userspace, that scary place
- * where pointers run wild and free!  Unfortunately, like most userspace
- * programs, it's quite boring (which is why everyone likes to hack on the
- * kernel!).  Perhaps if you make up an Lguest Drinking Game at this point, it
- * will get you through this section.  Or, maybe not.
+/*L:100
+ * The Launcher code itself takes us out into userspace, that scary place where
+ * pointers run wild and free!  Unfortunately, like most userspace programs,
+ * it's quite boring (which is why everyone likes to hack on the kernel!).
+ * Perhaps if you make up an Lguest Drinking Game at this point, it will get
+ * you through this section.  Or, maybe not.
  *
  * The Launcher sets up a big chunk of memory to be the Guest's "physical"
  * memory and stores it in "guest_base".  In other words, Guest physical ==
@@ -253,7 +262,8 @@ static u8 *get_feature_bits(struct device *dev)
  *
  * This can be tough to get your head around, but usually it just means that we
  * use these trivial conversion functions when the Guest gives us it's
- * "physical" addresses: */
+ * "physical" addresses:
+ */
 static void *from_guest_phys(unsigned long addr)
 {
 	return guest_base + addr;
@@ -268,7 +278,8 @@ static unsigned long to_guest_phys(const void *addr)
  * Loading the Kernel.
  *
  * We start with couple of simple helper routines.  open_or_die() avoids
- * error-checking code cluttering the callers: */
+ * error-checking code cluttering the callers:
+ */
 static int open_or_die(const char *name, int flags)
 {
 	int fd = open(name, flags);
@@ -283,12 +294,19 @@ static void *map_zeroed_pages(unsigned int num)
 	int fd = open_or_die("/dev/zero", O_RDONLY);
 	void *addr;
 
-	/* We use a private mapping (ie. if we write to the page, it will be
-	 * copied). */
+	/*
+	 * We use a private mapping (ie. if we write to the page, it will be
+	 * copied).
+	 */
 	addr = mmap(NULL, getpagesize() * num,
 		    PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE, fd, 0);
 	if (addr == MAP_FAILED)
 		err(1, "Mmaping %u pages of /dev/zero", num);
+
+	/*
+	 * One neat mmap feature is that you can close the fd, and it
+	 * stays mapped.
+	 */
 	close(fd);
 
 	return addr;
@@ -305,20 +323,24 @@ static void *get_pages(unsigned int num)
 	return addr;
 }
 
-/* This routine is used to load the kernel or initrd.  It tries mmap, but if
+/*
+ * This routine is used to load the kernel or initrd.  It tries mmap, but if
  * that fails (Plan 9's kernel file isn't nicely aligned on page boundaries),
- * it falls back to reading the memory in. */
+ * it falls back to reading the memory in.
+ */
 static void map_at(int fd, void *addr, unsigned long offset, unsigned long len)
 {
 	ssize_t r;
 
-	/* We map writable even though for some segments are marked read-only.
+	/*
+	 * We map writable even though for some segments are marked read-only.
 	 * The kernel really wants to be writable: it patches its own
 	 * instructions.
 	 *
 	 * MAP_PRIVATE means that the page won't be copied until a write is
 	 * done to it.  This allows us to share untouched memory between
-	 * Guests. */
+	 * Guests.
+	 */
 	if (mmap(addr, len, PROT_READ|PROT_WRITE|PROT_EXEC,
 		 MAP_FIXED|MAP_PRIVATE, fd, offset) != MAP_FAILED)
 		return;
@@ -329,7 +351,8 @@ static void map_at(int fd, void *addr, unsigned long offset, unsigned long len)
 		err(1, "Reading offset %lu len %lu gave %zi", offset, len, r);
 }
 
-/* This routine takes an open vmlinux image, which is in ELF, and maps it into
+/*
+ * This routine takes an open vmlinux image, which is in ELF, and maps it into
  * the Guest memory.  ELF = Embedded Linking Format, which is the format used
  * by all modern binaries on Linux including the kernel.
  *
@@ -337,23 +360,28 @@ static void map_at(int fd, void *addr, unsigned long offset, unsigned long len)
  * address.  We use the physical address; the Guest will map itself to the
  * virtual address.
  *
- * We return the starting address. */
+ * We return the starting address.
+ */
 static unsigned long map_elf(int elf_fd, const Elf32_Ehdr *ehdr)
 {
 	Elf32_Phdr phdr[ehdr->e_phnum];
 	unsigned int i;
 
-	/* Sanity checks on the main ELF header: an x86 executable with a
-	 * reasonable number of correctly-sized program headers. */
+	/*
+	 * Sanity checks on the main ELF header: an x86 executable with a
+	 * reasonable number of correctly-sized program headers.
+	 */
 	if (ehdr->e_type != ET_EXEC
 	    || ehdr->e_machine != EM_386
 	    || ehdr->e_phentsize != sizeof(Elf32_Phdr)
 	    || ehdr->e_phnum < 1 || ehdr->e_phnum > 65536U/sizeof(Elf32_Phdr))
 		errx(1, "Malformed elf header");
 
-	/* An ELF executable contains an ELF header and a number of "program"
+	/*
+	 * An ELF executable contains an ELF header and a number of "program"
 	 * headers which indicate which parts ("segments") of the program to
-	 * load where. */
+	 * load where.
+	 */
 
 	/* We read in all the program headers at once: */
 	if (lseek(elf_fd, ehdr->e_phoff, SEEK_SET) < 0)
@@ -361,8 +389,10 @@ static unsigned long map_elf(int elf_fd, const Elf32_Ehdr *ehdr)
 	if (read(elf_fd, phdr, sizeof(phdr)) != sizeof(phdr))
 		err(1, "Reading program headers");
 
-	/* Try all the headers: there are usually only three.  A read-only one,
-	 * a read-write one, and a "note" section which we don't load. */
+	/*
+	 * Try all the headers: there are usually only three.  A read-only one,
+	 * a read-write one, and a "note" section which we don't load.
+	 */
 	for (i = 0; i < ehdr->e_phnum; i++) {
 		/* If this isn't a loadable segment, we ignore it */
 		if (phdr[i].p_type != PT_LOAD)
@@ -380,13 +410,15 @@ static unsigned long map_elf(int elf_fd, const Elf32_Ehdr *ehdr)
 	return ehdr->e_entry;
 }
 
-/*L:150 A bzImage, unlike an ELF file, is not meant to be loaded.  You're
- * supposed to jump into it and it will unpack itself.  We used to have to
- * perform some hairy magic because the unpacking code scared me.
+/*L:150
+ * A bzImage, unlike an ELF file, is not meant to be loaded.  You're supposed
+ * to jump into it and it will unpack itself.  We used to have to perform some
+ * hairy magic because the unpacking code scared me.
  *
  * Fortunately, Jeremy Fitzhardinge convinced me it wasn't that hard and wrote
  * a small patch to jump over the tricky bits in the Guest, so now we just read
- * the funky header so we know where in the file to load, and away we go! */
+ * the funky header so we know where in the file to load, and away we go!
+ */
 static unsigned long load_bzimage(int fd)
 {
 	struct boot_params boot;
@@ -394,8 +426,10 @@ static unsigned long load_bzimage(int fd)
 	/* Modern bzImages get loaded at 1M. */
 	void *p = from_guest_phys(0x100000);
 
-	/* Go back to the start of the file and read the header.  It should be
-	 * a Linux boot header (see Documentation/x86/i386/boot.txt) */
+	/*
+	 * Go back to the start of the file and read the header.  It should be
+	 * a Linux boot header (see Documentation/x86/i386/boot.txt)
+	 */
 	lseek(fd, 0, SEEK_SET);
 	read(fd, &boot, sizeof(boot));
 
@@ -414,9 +448,11 @@ static unsigned long load_bzimage(int fd)
 	return boot.hdr.code32_start;
 }
 
-/*L:140 Loading the kernel is easy when it's a "vmlinux", but most kernels
+/*L:140
+ * Loading the kernel is easy when it's a "vmlinux", but most kernels
  * come wrapped up in the self-decompressing "bzImage" format.  With a little
- * work, we can load those, too. */
+ * work, we can load those, too.
+ */
 static unsigned long load_kernel(int fd)
 {
 	Elf32_Ehdr hdr;
@@ -433,24 +469,28 @@ static unsigned long load_kernel(int fd)
 	return load_bzimage(fd);
 }
 
-/* This is a trivial little helper to align pages.  Andi Kleen hated it because
+/*
+ * This is a trivial little helper to align pages.  Andi Kleen hated it because
  * it calls getpagesize() twice: "it's dumb code."
  *
  * Kernel guys get really het up about optimization, even when it's not
- * necessary.  I leave this code as a reaction against that. */
+ * necessary.  I leave this code as a reaction against that.
+ */
 static inline unsigned long page_align(unsigned long addr)
 {
 	/* Add upwards and truncate downwards. */
 	return ((addr + getpagesize()-1) & ~(getpagesize()-1));
 }
 
-/*L:180 An "initial ram disk" is a disk image loaded into memory along with
- * the kernel which the kernel can use to boot from without needing any
- * drivers.  Most distributions now use this as standard: the initrd contains
- * the code to load the appropriate driver modules for the current machine.
+/*L:180
+ * An "initial ram disk" is a disk image loaded into memory along with the
+ * kernel which the kernel can use to boot from without needing any drivers.
+ * Most distributions now use this as standard: the initrd contains the code to
+ * load the appropriate driver modules for the current machine.
  *
  * Importantly, James Morris works for RedHat, and Fedora uses initrds for its
- * kernels.  He sent me this (and tells me when I break it). */
+ * kernels.  He sent me this (and tells me when I break it).
+ */
 static unsigned long load_initrd(const char *name, unsigned long mem)
 {
 	int ifd;
@@ -462,12 +502,16 @@ static unsigned long load_initrd(const char *name, unsigned long mem)
 	if (fstat(ifd, &st) < 0)
 		err(1, "fstat() on initrd '%s'", name);
 
-	/* We map the initrd at the top of memory, but mmap wants it to be
-	 * page-aligned, so we round the size up for that. */
+	/*
+	 * We map the initrd at the top of memory, but mmap wants it to be
+	 * page-aligned, so we round the size up for that.
+	 */
 	len = page_align(st.st_size);
 	map_at(ifd, from_guest_phys(mem - len), 0, st.st_size);
-	/* Once a file is mapped, you can close the file descriptor.  It's a
-	 * little odd, but quite useful. */
+	/*
+	 * Once a file is mapped, you can close the file descriptor.  It's a
+	 * little odd, but quite useful.
+	 */
 	close(ifd);
 	verbose("mapped initrd %s size=%lu @ %p\n", name, len, (void*)mem-len);
 
@@ -476,8 +520,10 @@ static unsigned long load_initrd(const char *name, unsigned long mem)
 }
 /*:*/
 
-/* Simple routine to roll all the commandline arguments together with spaces
- * between them. */
+/*
+ * Simple routine to roll all the commandline arguments together with spaces
+ * between them.
+ */
 static void concat(char *dst, char *args[])
 {
 	unsigned int i, len = 0;
@@ -494,10 +540,12 @@ static void concat(char *dst, char *args[])
 	dst[len] = '\0';
 }
 
-/*L:185 This is where we actually tell the kernel to initialize the Guest.  We
+/*L:185
+ * This is where we actually tell the kernel to initialize the Guest.  We
  * saw the arguments it expects when we looked at initialize() in lguest_user.c:
  * the base of Guest "physical" memory, the top physical page to allow and the
- * entry point for the Guest. */
+ * entry point for the Guest.
+ */
 static void tell_kernel(unsigned long start)
 {
 	unsigned long args[] = { LHREQ_INITIALIZE,
@@ -511,7 +559,7 @@ static void tell_kernel(unsigned long start)
 }
 /*:*/
 
-/*
+/*L:200
  * Device Handling.
  *
  * When the Guest gives us a buffer, it sends an array of addresses and sizes.
@@ -522,20 +570,26 @@ static void tell_kernel(unsigned long start)
 static void *_check_pointer(unsigned long addr, unsigned int size,
 			    unsigned int line)
 {
-	/* We have to separately check addr and addr+size, because size could
-	 * be huge and addr + size might wrap around. */
+	/*
+	 * We have to separately check addr and addr+size, because size could
+	 * be huge and addr + size might wrap around.
+	 */
 	if (addr >= guest_limit || addr + size >= guest_limit)
 		errx(1, "%s:%i: Invalid address %#lx", __FILE__, line, addr);
-	/* We return a pointer for the caller's convenience, now we know it's
-	 * safe to use. */
+	/*
+	 * We return a pointer for the caller's convenience, now we know it's
+	 * safe to use.
+	 */
 	return from_guest_phys(addr);
 }
 /* A macro which transparently hands the line number to the real function. */
 #define check_pointer(addr,size) _check_pointer(addr, size, __LINE__)
 
-/* Each buffer in the virtqueues is actually a chain of descriptors.  This
+/*
+ * Each buffer in the virtqueues is actually a chain of descriptors.  This
  * function returns the next descriptor in the chain, or vq->vring.num if we're
- * at the end. */
+ * at the end.
+ */
 static unsigned next_desc(struct vring_desc *desc,
 			  unsigned int i, unsigned int max)
 {
@@ -556,7 +610,10 @@ static unsigned next_desc(struct vring_desc *desc,
 	return next;
 }
 
-/* This actually sends the interrupt for this virtqueue */
+/*
+ * This actually sends the interrupt for this virtqueue, if we've used a
+ * buffer.
+ */
 static void trigger_irq(struct virtqueue *vq)
 {
 	unsigned long buf[] = { LHREQ_IRQ, vq->config.irq };
@@ -576,12 +633,14 @@ static void trigger_irq(struct virtqueue *vq)
 		err(1, "Triggering irq %i", vq->config.irq);
 }
 
-/* This looks in the virtqueue and for the first available buffer, and converts
+/*
+ * This looks in the virtqueue for the first available buffer, and converts
  * it to an iovec for convenient access.  Since descriptors consist of some
  * number of output then some number of input descriptors, it's actually two
  * iovecs, but we pack them into one and note how many of each there were.
  *
- * This function returns the descriptor number found. */
+ * This function waits if necessary, and returns the descriptor number found.
+ */
 static unsigned wait_for_vq_desc(struct virtqueue *vq,
 				 struct iovec iov[],
 				 unsigned int *out_num, unsigned int *in_num)
@@ -590,17 +649,23 @@ static unsigned wait_for_vq_desc(struct virtqueue *vq,
 	struct vring_desc *desc;
 	u16 last_avail = lg_last_avail(vq);
 
+	/* There's nothing available? */
 	while (last_avail == vq->vring.avail->idx) {
 		u64 event;
 
-		/* OK, tell Guest about progress up to now. */
+		/*
+		 * Since we're about to sleep, now is a good time to tell the
+		 * Guest about what we've used up to now.
+		 */
 		trigger_irq(vq);
 
 		/* OK, now we need to know about added descriptors. */
 		vq->vring.used->flags &= ~VRING_USED_F_NO_NOTIFY;
 
-		/* They could have slipped one in as we were doing that: make
-		 * sure it's written, then check again. */
+		/*
+		 * They could have slipped one in as we were doing that: make
+		 * sure it's written, then check again.
+		 */
 		mb();
 		if (last_avail != vq->vring.avail->idx) {
 			vq->vring.used->flags |= VRING_USED_F_NO_NOTIFY;
@@ -620,8 +685,10 @@ static unsigned wait_for_vq_desc(struct virtqueue *vq,
 		errx(1, "Guest moved used index from %u to %u",
 		     last_avail, vq->vring.avail->idx);
 
-	/* Grab the next descriptor number they're advertising, and increment
-	 * the index we've seen. */
+	/*
+	 * Grab the next descriptor number they're advertising, and increment
+	 * the index we've seen.
+	 */
 	head = vq->vring.avail->ring[last_avail % vq->vring.num];
 	lg_last_avail(vq)++;
 
@@ -636,8 +703,10 @@ static unsigned wait_for_vq_desc(struct virtqueue *vq,
 	desc = vq->vring.desc;
 	i = head;
 
-	/* If this is an indirect entry, then this buffer contains a descriptor
-	 * table which we handle as if it's any normal descriptor chain. */
+	/*
+	 * If this is an indirect entry, then this buffer contains a descriptor
+	 * table which we handle as if it's any normal descriptor chain.
+	 */
 	if (desc[i].flags & VRING_DESC_F_INDIRECT) {
 		if (desc[i].len % sizeof(struct vring_desc))
 			errx(1, "Invalid size for indirect buffer table");
@@ -656,8 +725,10 @@ static unsigned wait_for_vq_desc(struct virtqueue *vq,
 		if (desc[i].flags & VRING_DESC_F_WRITE)
 			(*in_num)++;
 		else {
-			/* If it's an output descriptor, they're all supposed
-			 * to come before any input descriptors. */
+			/*
+			 * If it's an output descriptor, they're all supposed
+			 * to come before any input descriptors.
+			 */
 			if (*in_num)
 				errx(1, "Descriptor has out after in");
 			(*out_num)++;
@@ -671,14 +742,19 @@ static unsigned wait_for_vq_desc(struct virtqueue *vq,
 	return head;
 }
 
-/* After we've used one of their buffers, we tell them about it.  We'll then
- * want to send them an interrupt, using trigger_irq(). */
+/*
+ * After we've used one of their buffers, we tell the Guest about it.  Sometime
+ * later we'll want to send them an interrupt using trigger_irq(); note that
+ * wait_for_vq_desc() does that for us if it has to wait.
+ */
 static void add_used(struct virtqueue *vq, unsigned int head, int len)
 {
 	struct vring_used_elem *used;
 
-	/* The virtqueue contains a ring of used buffers.  Get a pointer to the
-	 * next entry in that used ring. */
+	/*
+	 * The virtqueue contains a ring of used buffers.  Get a pointer to the
+	 * next entry in that used ring.
+	 */
 	used = &vq->vring.used->ring[vq->vring.used->idx % vq->vring.num];
 	used->id = head;
 	used->len = len;
@@ -698,9 +774,9 @@ static void add_used_and_trigger(struct virtqueue *vq, unsigned head, int len)
 /*
  * The Console
  *
- * We associate some data with the console for our exit hack. */
-struct console_abort
-{
+ * We associate some data with the console for our exit hack.
+ */
+struct console_abort {
 	/* How many times have they hit ^C? */
 	int count;
 	/* When did they start? */
@@ -715,30 +791,35 @@ static void console_input(struct virtqueue *vq)
 	struct console_abort *abort = vq->dev->priv;
 	struct iovec iov[vq->vring.num];
 
-	/* Make sure there's a descriptor waiting. */
+	/* Make sure there's a descriptor available. */
 	head = wait_for_vq_desc(vq, iov, &out_num, &in_num);
 	if (out_num)
 		errx(1, "Output buffers in console in queue?");
 
-	/* Read it in. */
+	/* Read into it.  This is where we usually wait. */
 	len = readv(STDIN_FILENO, iov, in_num);
 	if (len <= 0) {
 		/* Ran out of input? */
 		warnx("Failed to get console input, ignoring console.");
-		/* For simplicity, dying threads kill the whole Launcher.  So
-		 * just nap here. */
+		/*
+		 * For simplicity, dying threads kill the whole Launcher.  So
+		 * just nap here.
+		 */
 		for (;;)
 			pause();
 	}
 
+	/* Tell the Guest we used a buffer. */
 	add_used_and_trigger(vq, head, len);
 
-	/* Three ^C within one second?  Exit.
+	/*
+	 * Three ^C within one second?  Exit.
 	 *
 	 * This is such a hack, but works surprisingly well.  Each ^C has to
 	 * be in a buffer by itself, so they can't be too fast.  But we check
 	 * that we get three within about a second, so they can't be too
-	 * slow. */
+	 * slow.
+	 */
 	if (len != 1 || ((char *)iov[0].iov_base)[0] != 3) {
 		abort->count = 0;
 		return;
@@ -763,15 +844,23 @@ static void console_output(struct virtqueue *vq)
 	unsigned int head, out, in;
 	struct iovec iov[vq->vring.num];
 
+	/* We usually wait in here, for the Guest to give us something. */
 	head = wait_for_vq_desc(vq, iov, &out, &in);
 	if (in)
 		errx(1, "Input buffers in console output queue?");
+
+	/* writev can return a partial write, so we loop here. */
 	while (!iov_empty(iov, out)) {
 		int len = writev(STDOUT_FILENO, iov, out);
 		if (len <= 0)
 			err(1, "Write to stdout gave %i", len);
 		iov_consume(iov, out, len);
 	}
+
+	/*
+	 * We're finished with that buffer: if we're going to sleep,
+	 * wait_for_vq_desc() will prod the Guest with an interrupt.
+	 */
 	add_used(vq, head, 0);
 }
 
@@ -791,15 +880,30 @@ static void net_output(struct virtqueue *vq)
 	unsigned int head, out, in;
 	struct iovec iov[vq->vring.num];
 
+	/* We usually wait in here for the Guest to give us a packet. */
 	head = wait_for_vq_desc(vq, iov, &out, &in);
 	if (in)
 		errx(1, "Input buffers in net output queue?");
+	/*
+	 * Send the whole thing through to /dev/net/tun.  It expects the exact
+	 * same format: what a coincidence!
+	 */
 	if (writev(net_info->tunfd, iov, out) < 0)
 		errx(1, "Write to tun failed?");
+
+	/*
+	 * Done with that one; wait_for_vq_desc() will send the interrupt if
+	 * all packets are processed.
+	 */
 	add_used(vq, head, 0);
 }
 
-/* Will reading from this file descriptor block? */
+/*
+ * Handling network input is a bit trickier, because I've tried to optimize it.
+ *
+ * First we have a helper routine which tells is if from this file descriptor
+ * (ie. the /dev/net/tun device) will block:
+ */
 static bool will_block(int fd)
 {
 	fd_set fdset;
@@ -809,8 +913,11 @@ static bool will_block(int fd)
 	return select(fd+1, &fdset, NULL, NULL, &zero) != 1;
 }
 
-/* This is where we handle packets coming in from the tun device to our
- * Guest. */
+/*
+ * This handles packets coming in from the tun device to our Guest.  Like all
+ * service routines, it gets called again as soon as it returns, so you don't
+ * see a while(1) loop here.
+ */
 static void net_input(struct virtqueue *vq)
 {
 	int len;
@@ -818,21 +925,38 @@ static void net_input(struct virtqueue *vq)
 	struct iovec iov[vq->vring.num];
 	struct net_info *net_info = vq->dev->priv;
 
+	/*
+	 * Get a descriptor to write an incoming packet into.  This will also
+	 * send an interrupt if they're out of descriptors.
+	 */
 	head = wait_for_vq_desc(vq, iov, &out, &in);
 	if (out)
 		errx(1, "Output buffers in net input queue?");
 
-	/* Deliver interrupt now, since we're about to sleep. */
+	/*
+	 * If it looks like we'll block reading from the tun device, send them
+	 * an interrupt.
+	 */
 	if (vq->pending_used && will_block(net_info->tunfd))
 		trigger_irq(vq);
 
+	/*
+	 * Read in the packet.  This is where we normally wait (when there's no
+	 * incoming network traffic).
+	 */
 	len = readv(net_info->tunfd, iov, in);
 	if (len <= 0)
 		err(1, "Failed to read from tun.");
+
+	/*
+	 * Mark that packet buffer as used, but don't interrupt here.  We want
+	 * to wait until we've done as much work as we can.
+	 */
 	add_used(vq, head, len);
 }
+/*:*/
 
-/* This is the helper to create threads. */
+/* This is the helper to create threads: run the service routine in a loop. */
 static int do_thread(void *_vq)
 {
 	struct virtqueue *vq = _vq;
@@ -842,8 +966,10 @@ static int do_thread(void *_vq)
 	return 0;
 }
 
-/* When a child dies, we kill our entire process group with SIGTERM.  This
- * also has the side effect that the shell restores the console for us! */
+/*
+ * When a child dies, we kill our entire process group with SIGTERM.  This
+ * also has the side effect that the shell restores the console for us!
+ */
 static void kill_launcher(int signal)
 {
 	kill(0, SIGTERM);
@@ -878,11 +1004,15 @@ static void reset_device(struct device *dev)
 	signal(SIGCHLD, (void *)kill_launcher);
 }
 
+/*L:216
+ * This actually creates the thread which services the virtqueue for a device.
+ */
 static void create_thread(struct virtqueue *vq)
 {
-	/* Create stack for thread and run it.  Since stack grows
-	 * upwards, we point the stack pointer to the end of this
-	 * region. */
+	/*
+	 * Create stack for thread.  Since the stack grows upwards, we point
+	 * the stack pointer to the end of this region.
+	 */
 	char *stack = malloc(32768);
 	unsigned long args[] = { LHREQ_EVENTFD,
 				 vq->config.pfn*getpagesize(), 0 };
@@ -893,17 +1023,22 @@ static void create_thread(struct virtqueue *vq)
 		err(1, "Creating eventfd");
 	args[2] = vq->eventfd;
 
-	/* Attach an eventfd to this virtqueue: it will go off
-	 * when the Guest does an LHCALL_NOTIFY for this vq. */
+	/*
+	 * Attach an eventfd to this virtqueue: it will go off when the Guest
+	 * does an LHCALL_NOTIFY for this vq.
+	 */
 	if (write(lguest_fd, &args, sizeof(args)) != 0)
 		err(1, "Attaching eventfd");
 
-	/* CLONE_VM: because it has to access the Guest memory, and
-	 * SIGCHLD so we get a signal if it dies. */
+	/*
+	 * CLONE_VM: because it has to access the Guest memory, and SIGCHLD so
+	 * we get a signal if it dies.
+	 */
 	vq->thread = clone(do_thread, stack + 32768, CLONE_VM | SIGCHLD, vq);
 	if (vq->thread == (pid_t)-1)
 		err(1, "Creating clone");
-	/* We close our local copy, now the child has it. */
+
+	/* We close our local copy now the child has it. */
 	close(vq->eventfd);
 }
 
@@ -955,7 +1090,10 @@ static void update_device_status(struct device *dev)
 	}
 }
 
-/* This is the generic routine we call when the Guest uses LHCALL_NOTIFY. */
+/*L:215
+ * This is the generic routine we call when the Guest uses LHCALL_NOTIFY.  In
+ * particular, it's used to notify us of device status changes during boot.
+ */
 static void handle_output(unsigned long addr)
 {
 	struct device *i;
@@ -964,25 +1102,42 @@ static void handle_output(unsigned long addr)
 	for (i = devices.dev; i; i = i->next) {
 		struct virtqueue *vq;
 
-		/* Notifications to device descriptors update device status. */
+		/*
+		 * Notifications to device descriptors mean they updated the
+		 * device status.
+		 */
 		if (from_guest_phys(addr) == i->desc) {
 			update_device_status(i);
 			return;
 		}
 
-		/* Devices *can* be used before status is set to DRIVER_OK. */
+		/*
+		 * Devices *can* be used before status is set to DRIVER_OK.
+		 * The original plan was that they would never do this: they
+		 * would always finish setting up their status bits before
+		 * actually touching the virtqueues.  In practice, we allowed
+		 * them to, and they do (eg. the disk probes for partition
+		 * tables as part of initialization).
+		 *
+		 * If we see this, we start the device: once it's running, we
+		 * expect the device to catch all the notifications.
+		 */
 		for (vq = i->vq; vq; vq = vq->next) {
 			if (addr != vq->config.pfn*getpagesize())
 				continue;
 			if (i->running)
 				errx(1, "Notification on running %s", i->name);
+			/* This just calls create_thread() for each virtqueue */
 			start_device(i);
 			return;
 		}
 	}
 
-	/* Early console write is done using notify on a nul-terminated string
-	 * in Guest memory. */
+	/*
+	 * Early console write is done using notify on a nul-terminated string
+	 * in Guest memory.  It's also great for hacking debugging messages
+	 * into a Guest.
+	 */
 	if (addr >= guest_limit)
 		errx(1, "Bad NOTIFY %#lx", addr);
 
@@ -998,10 +1153,12 @@ static void handle_output(unsigned long addr)
  * routines to allocate and manage them.
  */
 
-/* The layout of the device page is a "struct lguest_device_desc" followed by a
+/*
+ * The layout of the device page is a "struct lguest_device_desc" followed by a
  * number of virtqueue descriptors, then two sets of feature bits, then an
  * array of configuration bytes.  This routine returns the configuration
- * pointer. */
+ * pointer.
+ */
 static u8 *device_config(const struct device *dev)
 {
 	return (void *)(dev->desc + 1)
@@ -1009,9 +1166,11 @@ static u8 *device_config(const struct device *dev)
 		+ dev->feature_len * 2;
 }
 
-/* This routine allocates a new "struct lguest_device_desc" from descriptor
+/*
+ * This routine allocates a new "struct lguest_device_desc" from descriptor
  * table page just above the Guest's normal memory.  It returns a pointer to
- * that descriptor. */
+ * that descriptor.
+ */
 static struct lguest_device_desc *new_dev_desc(u16 type)
 {
 	struct lguest_device_desc d = { .type = type };
@@ -1032,8 +1191,10 @@ static struct lguest_device_desc *new_dev_desc(u16 type)
 	return memcpy(p, &d, sizeof(d));
 }
 
-/* Each device descriptor is followed by the description of its virtqueues.  We
- * specify how many descriptors the virtqueue is to have. */
+/*
+ * Each device descriptor is followed by the description of its virtqueues.  We
+ * specify how many descriptors the virtqueue is to have.
+ */
 static void add_virtqueue(struct device *dev, unsigned int num_descs,
 			  void (*service)(struct virtqueue *))
 {
@@ -1050,6 +1211,11 @@ static void add_virtqueue(struct device *dev, unsigned int num_descs,
 	vq->next = NULL;
 	vq->last_avail_idx = 0;
 	vq->dev = dev;
+
+	/*
+	 * This is the routine the service thread will run, and its Process ID
+	 * once it's running.
+	 */
 	vq->service = service;
 	vq->thread = (pid_t)-1;
 
@@ -1061,10 +1227,12 @@ static void add_virtqueue(struct device *dev, unsigned int num_descs,
 	/* Initialize the vring. */
 	vring_init(&vq->vring, num_descs, p, LGUEST_VRING_ALIGN);
 
-	/* Append virtqueue to this device's descriptor.  We use
+	/*
+	 * Append virtqueue to this device's descriptor.  We use
 	 * device_config() to get the end of the device's current virtqueues;
 	 * we check that we haven't added any config or feature information
-	 * yet, otherwise we'd be overwriting them. */
+	 * yet, otherwise we'd be overwriting them.
+	 */
 	assert(dev->desc->config_len == 0 && dev->desc->feature_len == 0);
 	memcpy(device_config(dev), &vq->config, sizeof(vq->config));
 	dev->num_vq++;
@@ -1072,14 +1240,18 @@ static void add_virtqueue(struct device *dev, unsigned int num_descs,
 
 	verbose("Virtqueue page %#lx\n", to_guest_phys(p));
 
-	/* Add to tail of list, so dev->vq is first vq, dev->vq->next is
-	 * second.  */
+	/*
+	 * Add to tail of list, so dev->vq is first vq, dev->vq->next is
+	 * second.
+	 */
 	for (i = &dev->vq; *i; i = &(*i)->next);
 	*i = vq;
 }
 
-/* The first half of the feature bitmask is for us to advertise features.  The
- * second half is for the Guest to accept features. */
+/*
+ * The first half of the feature bitmask is for us to advertise features.  The
+ * second half is for the Guest to accept features.
+ */
 static void add_feature(struct device *dev, unsigned bit)
 {
 	u8 *features = get_feature_bits(dev);
@@ -1093,9 +1265,11 @@ static void add_feature(struct device *dev, unsigned bit)
 	features[bit / CHAR_BIT] |= (1 << (bit % CHAR_BIT));
 }
 
-/* This routine sets the configuration fields for an existing device's
+/*
+ * This routine sets the configuration fields for an existing device's
  * descriptor.  It only works for the last device, but that's OK because that's
- * how we use it. */
+ * how we use it.
+ */
 static void set_config(struct device *dev, unsigned len, const void *conf)
 {
 	/* Check we haven't overflowed our single page. */
@@ -1105,12 +1279,18 @@ static void set_config(struct device *dev, unsigned len, const void *conf)
 	/* Copy in the config information, and store the length. */
 	memcpy(device_config(dev), conf, len);
 	dev->desc->config_len = len;
+
+	/* Size must fit in config_len field (8 bits)! */
+	assert(dev->desc->config_len == len);
 }
 
-/* This routine does all the creation and setup of a new device, including
- * calling new_dev_desc() to allocate the descriptor and device memory.
+/*
+ * This routine does all the creation and setup of a new device, including
+ * calling new_dev_desc() to allocate the descriptor and device memory.  We
+ * don't actually start the service threads until later.
  *
- * See what I mean about userspace being boring? */
+ * See what I mean about userspace being boring?
+ */
 static struct device *new_device(const char *name, u16 type)
 {
 	struct device *dev = malloc(sizeof(*dev));
@@ -1123,10 +1303,12 @@ static struct device *new_device(const char *name, u16 type)
 	dev->num_vq = 0;
 	dev->running = false;
 
-	/* Append to device list.  Prepending to a single-linked list is
+	/*
+	 * Append to device list.  Prepending to a single-linked list is
 	 * easier, but the user expects the devices to be arranged on the bus
 	 * in command-line order.  The first network device on the command line
-	 * is eth0, the first block device /dev/vda, etc. */
+	 * is eth0, the first block device /dev/vda, etc.
+	 */
 	if (devices.lastdev)
 		devices.lastdev->next = dev;
 	else
@@ -1136,8 +1318,10 @@ static struct device *new_device(const char *name, u16 type)
 	return dev;
 }
 
-/* Our first setup routine is the console.  It's a fairly simple device, but
- * UNIX tty handling makes it uglier than it could be. */
+/*
+ * Our first setup routine is the console.  It's a fairly simple device, but
+ * UNIX tty handling makes it uglier than it could be.
+ */
 static void setup_console(void)
 {
 	struct device *dev;
@@ -1145,8 +1329,10 @@ static void setup_console(void)
 	/* If we can save the initial standard input settings... */
 	if (tcgetattr(STDIN_FILENO, &orig_term) == 0) {
 		struct termios term = orig_term;
-		/* Then we turn off echo, line buffering and ^C etc.  We want a
-		 * raw input stream to the Guest. */
+		/*
+		 * Then we turn off echo, line buffering and ^C etc: We want a
+		 * raw input stream to the Guest.
+		 */
 		term.c_lflag &= ~(ISIG|ICANON|ECHO);
 		tcsetattr(STDIN_FILENO, TCSANOW, &term);
 	}
@@ -1157,10 +1343,12 @@ static void setup_console(void)
 	dev->priv = malloc(sizeof(struct console_abort));
 	((struct console_abort *)dev->priv)->count = 0;
 
-	/* The console needs two virtqueues: the input then the output.  When
+	/*
+	 * The console needs two virtqueues: the input then the output.  When
 	 * they put something the input queue, we make sure we're listening to
 	 * stdin.  When they put something in the output queue, we write it to
-	 * stdout. */
+	 * stdout.
+	 */
 	add_virtqueue(dev, VIRTQUEUE_NUM, console_input);
 	add_virtqueue(dev, VIRTQUEUE_NUM, console_output);
 
@@ -1168,7 +1356,8 @@ static void setup_console(void)
 }
 /*:*/
 
-/*M:010 Inter-guest networking is an interesting area.  Simplest is to have a
+/*M:010
+ * Inter-guest networking is an interesting area.  Simplest is to have a
  * --sharenet=<name> option which opens or creates a named pipe.  This can be
  * used to send packets to another guest in a 1:1 manner.
  *
@@ -1182,7 +1371,8 @@ static void setup_console(void)
  * multiple inter-guest channels behind one interface, although it would
  * require some manner of hotplugging new virtio channels.
  *
- * Finally, we could implement a virtio network switch in the kernel. :*/
+ * Finally, we could implement a virtio network switch in the kernel.
+:*/
 
 static u32 str2ip(const char *ipaddr)
 {
@@ -1207,11 +1397,13 @@ static void str2mac(const char *macaddr, unsigned char mac[6])
 	mac[5] = m[5];
 }
 
-/* This code is "adapted" from libbridge: it attaches the Host end of the
+/*
+ * This code is "adapted" from libbridge: it attaches the Host end of the
  * network device to the bridge device specified by the command line.
  *
  * This is yet another James Morris contribution (I'm an IP-level guy, so I
- * dislike bridging), and I just try not to break it. */
+ * dislike bridging), and I just try not to break it.
+ */
 static void add_to_bridge(int fd, const char *if_name, const char *br_name)
 {
 	int ifidx;
@@ -1231,9 +1423,11 @@ static void add_to_bridge(int fd, const char *if_name, const char *br_name)
 		err(1, "can't add %s to bridge %s", if_name, br_name);
 }
 
-/* This sets up the Host end of the network device with an IP address, brings
+/*
+ * This sets up the Host end of the network device with an IP address, brings
  * it up so packets will flow, the copies the MAC address into the hwaddr
- * pointer. */
+ * pointer.
+ */
 static void configure_device(int fd, const char *tapif, u32 ipaddr)
 {
 	struct ifreq ifr;
@@ -1260,10 +1454,12 @@ static int get_tun_device(char tapif[IFNAMSIZ])
 	/* Start with this zeroed.  Messy but sure. */
 	memset(&ifr, 0, sizeof(ifr));
 
-	/* We open the /dev/net/tun device and tell it we want a tap device.  A
+	/*
+	 * We open the /dev/net/tun device and tell it we want a tap device.  A
 	 * tap device is like a tun device, only somehow different.  To tell
 	 * the truth, I completely blundered my way through this code, but it
-	 * works now! */
+	 * works now!
+	 */
 	netfd = open_or_die("/dev/net/tun", O_RDWR);
 	ifr.ifr_flags = IFF_TAP | IFF_NO_PI | IFF_VNET_HDR;
 	strcpy(ifr.ifr_name, "tap%d");
@@ -1274,18 +1470,22 @@ static int get_tun_device(char tapif[IFNAMSIZ])
 		  TUN_F_CSUM|TUN_F_TSO4|TUN_F_TSO6|TUN_F_TSO_ECN) != 0)
 		err(1, "Could not set features for tun device");
 
-	/* We don't need checksums calculated for packets coming in this
-	 * device: trust us! */
+	/*
+	 * We don't need checksums calculated for packets coming in this
+	 * device: trust us!
+	 */
 	ioctl(netfd, TUNSETNOCSUM, 1);
 
 	memcpy(tapif, ifr.ifr_name, IFNAMSIZ);
 	return netfd;
 }
 
-/*L:195 Our network is a Host<->Guest network.  This can either use bridging or
+/*L:195
+ * Our network is a Host<->Guest network.  This can either use bridging or
  * routing, but the principle is the same: it uses the "tun" device to inject
  * packets into the Host as if they came in from a normal network card.  We
- * just shunt packets between the Guest and the tun device. */
+ * just shunt packets between the Guest and the tun device.
+ */
 static void setup_tun_net(char *arg)
 {
 	struct device *dev;
@@ -1302,13 +1502,14 @@ static void setup_tun_net(char *arg)
 	dev = new_device("net", VIRTIO_ID_NET);
 	dev->priv = net_info;
 
-	/* Network devices need a receive and a send queue, just like
-	 * console. */
+	/* Network devices need a recv and a send queue, just like console. */
 	add_virtqueue(dev, VIRTQUEUE_NUM, net_input);
 	add_virtqueue(dev, VIRTQUEUE_NUM, net_output);
 
-	/* We need a socket to perform the magic network ioctls to bring up the
-	 * tap interface, connect to the bridge etc.  Any socket will do! */
+	/*
+	 * We need a socket to perform the magic network ioctls to bring up the
+	 * tap interface, connect to the bridge etc.  Any socket will do!
+	 */
 	ipfd = socket(PF_INET, SOCK_DGRAM, IPPROTO_IP);
 	if (ipfd < 0)
 		err(1, "opening IP socket");
@@ -1362,39 +1563,31 @@ static void setup_tun_net(char *arg)
 		verbose("device %u: tun %s: %s\n",
 			devices.device_num, tapif, arg);
 }
-
-/* Our block (disk) device should be really simple: the Guest asks for a block
- * number and we read or write that position in the file.  Unfortunately, that
- * was amazingly slow: the Guest waits until the read is finished before
- * running anything else, even if it could have been doing useful work.
- *
- * We could use async I/O, except it's reputed to suck so hard that characters
- * actually go missing from your code when you try to use it.
- *
- * So we farm the I/O out to thread, and communicate with it via a pipe. */
+/*:*/
 
 /* This hangs off device->priv. */
-struct vblk_info
-{
+struct vblk_info {
 	/* The size of the file. */
 	off64_t len;
 
 	/* The file descriptor for the file. */
 	int fd;
 
-	/* IO thread listens on this file descriptor [0]. */
-	int workpipe[2];
-
-	/* IO thread writes to this file descriptor to mark it done, then
-	 * Launcher triggers interrupt to Guest. */
-	int done_fd;
 };
 
 /*L:210
  * The Disk
  *
- * Remember that the block device is handled by a separate I/O thread.  We head
- * straight into the core of that thread here:
+ * The disk only has one virtqueue, so it only has one thread.  It is really
+ * simple: the Guest asks for a block number and we read or write that position
+ * in the file.
+ *
+ * Before we serviced each virtqueue in a separate thread, that was unacceptably
+ * slow: the Guest waits until the read is finished before running anything
+ * else, even if it could have been doing useful work.
+ *
+ * We could have used async I/O, except it's reputed to suck so hard that
+ * characters actually go missing from your code when you try to use it.
  */
 static void blk_request(struct virtqueue *vq)
 {
@@ -1406,47 +1599,64 @@ static void blk_request(struct virtqueue *vq)
 	struct iovec iov[vq->vring.num];
 	off64_t off;
 
-	/* Get the next request. */
+	/*
+	 * Get the next request, where we normally wait.  It triggers the
+	 * interrupt to acknowledge previously serviced requests (if any).
+	 */
 	head = wait_for_vq_desc(vq, iov, &out_num, &in_num);
 
-	/* Every block request should contain at least one output buffer
+	/*
+	 * Every block request should contain at least one output buffer
 	 * (detailing the location on disk and the type of request) and one
-	 * input buffer (to hold the result). */
+	 * input buffer (to hold the result).
+	 */
 	if (out_num == 0 || in_num == 0)
 		errx(1, "Bad virtblk cmd %u out=%u in=%u",
 		     head, out_num, in_num);
 
 	out = convert(&iov[0], struct virtio_blk_outhdr);
 	in = convert(&iov[out_num+in_num-1], u8);
+	/*
+	 * For historical reasons, block operations are expressed in 512 byte
+	 * "sectors".
+	 */
 	off = out->sector * 512;
 
-	/* The block device implements "barriers", where the Guest indicates
+	/*
+	 * The block device implements "barriers", where the Guest indicates
 	 * that it wants all previous writes to occur before this write.  We
 	 * don't have a way of asking our kernel to do a barrier, so we just
-	 * synchronize all the data in the file.  Pretty poor, no? */
+	 * synchronize all the data in the file.  Pretty poor, no?
+	 */
 	if (out->type & VIRTIO_BLK_T_BARRIER)
 		fdatasync(vblk->fd);
 
-	/* In general the virtio block driver is allowed to try SCSI commands.
-	 * It'd be nice if we supported eject, for example, but we don't. */
+	/*
+	 * In general the virtio block driver is allowed to try SCSI commands.
+	 * It'd be nice if we supported eject, for example, but we don't.
+	 */
 	if (out->type & VIRTIO_BLK_T_SCSI_CMD) {
 		fprintf(stderr, "Scsi commands unsupported\n");
 		*in = VIRTIO_BLK_S_UNSUPP;
 		wlen = sizeof(*in);
 	} else if (out->type & VIRTIO_BLK_T_OUT) {
-		/* Write */
-
-		/* Move to the right location in the block file.  This can fail
-		 * if they try to write past end. */
+		/*
+		 * Write
+		 *
+		 * Move to the right location in the block file.  This can fail
+		 * if they try to write past end.
+		 */
 		if (lseek64(vblk->fd, off, SEEK_SET) != off)
 			err(1, "Bad seek to sector %llu", out->sector);
 
 		ret = writev(vblk->fd, iov+1, out_num-1);
 		verbose("WRITE to sector %llu: %i\n", out->sector, ret);
 
-		/* Grr... Now we know how long the descriptor they sent was, we
+		/*
+		 * Grr... Now we know how long the descriptor they sent was, we
 		 * make sure they didn't try to write over the end of the block
-		 * file (possibly extending it). */
+		 * file (possibly extending it).
+		 */
 		if (ret > 0 && off + ret > vblk->len) {
 			/* Trim it back to the correct length */
 			ftruncate64(vblk->fd, vblk->len);
@@ -1456,10 +1666,12 @@ static void blk_request(struct virtqueue *vq)
 		wlen = sizeof(*in);
 		*in = (ret >= 0 ? VIRTIO_BLK_S_OK : VIRTIO_BLK_S_IOERR);
 	} else {
-		/* Read */
-
-		/* Move to the right location in the block file.  This can fail
-		 * if they try to read past end. */
+		/*
+		 * Read
+		 *
+		 * Move to the right location in the block file.  This can fail
+		 * if they try to read past end.
+		 */
 		if (lseek64(vblk->fd, off, SEEK_SET) != off)
 			err(1, "Bad seek to sector %llu", out->sector);
 
@@ -1474,13 +1686,16 @@ static void blk_request(struct virtqueue *vq)
 		}
 	}
 
-	/* OK, so we noted that it was pretty poor to use an fdatasync as a
+	/*
+	 * OK, so we noted that it was pretty poor to use an fdatasync as a
 	 * barrier.  But Christoph Hellwig points out that we need a sync
 	 * *afterwards* as well: "Barriers specify no reordering to the front
-	 * or the back."  And Jens Axboe confirmed it, so here we are: */
+	 * or the back."  And Jens Axboe confirmed it, so here we are:
+	 */
 	if (out->type & VIRTIO_BLK_T_BARRIER)
 		fdatasync(vblk->fd);
 
+	/* Finished that request. */
 	add_used(vq, head, wlen);
 }
 
@@ -1491,7 +1706,7 @@ static void setup_block_file(const char *filename)
 	struct vblk_info *vblk;
 	struct virtio_blk_config conf;
 
-	/* The device responds to return from I/O thread. */
+	/* Creat the device. */
 	dev = new_device("block", VIRTIO_ID_BLOCK);
 
 	/* The device has one virtqueue, where the Guest places requests. */
@@ -1510,27 +1725,32 @@ static void setup_block_file(const char *filename)
 	/* Tell Guest how many sectors this device has. */
 	conf.capacity = cpu_to_le64(vblk->len / 512);
 
-	/* Tell Guest not to put in too many descriptors at once: two are used
-	 * for the in and out elements. */
+	/*
+	 * Tell Guest not to put in too many descriptors at once: two are used
+	 * for the in and out elements.
+	 */
 	add_feature(dev, VIRTIO_BLK_F_SEG_MAX);
 	conf.seg_max = cpu_to_le32(VIRTQUEUE_NUM - 2);
 
-	set_config(dev, sizeof(conf), &conf);
+	/* Don't try to put whole struct: we have 8 bit limit. */
+	set_config(dev, offsetof(struct virtio_blk_config, geometry), &conf);
 
 	verbose("device %u: virtblock %llu sectors\n",
 		++devices.device_num, le64_to_cpu(conf.capacity));
 }
 
-struct rng_info {
-	int rfd;
-};
-
-/* Our random number generator device reads from /dev/random into the Guest's
+/*L:211
+ * Our random number generator device reads from /dev/random into the Guest's
  * input buffers.  The usual case is that the Guest doesn't want random numbers
  * and so has no buffers although /dev/random is still readable, whereas
  * console is the reverse.
  *
- * The same logic applies, however. */
+ * The same logic applies, however.
+ */
+struct rng_info {
+	int rfd;
+};
+
 static void rng_input(struct virtqueue *vq)
 {
 	int len;
@@ -1543,9 +1763,10 @@ static void rng_input(struct virtqueue *vq)
 	if (out_num)
 		errx(1, "Output buffers in rng?");
 
-	/* This is why we convert to iovecs: the readv() call uses them, and so
-	 * it reads straight into the Guest's buffer.  We loop to make sure we
-	 * fill it. */
+	/*
+	 * Just like the console write, we loop to cover the whole iovec.
+	 * In this case, short reads actually happen quite a bit.
+	 */
 	while (!iov_empty(iov, in_num)) {
 		len = readv(rng_info->rfd, iov, in_num);
 		if (len <= 0)
@@ -1558,15 +1779,18 @@ static void rng_input(struct virtqueue *vq)
 	add_used(vq, head, totlen);
 }
 
-/* And this creates a "hardware" random number device for the Guest. */
+/*L:199
+ * This creates a "hardware" random number device for the Guest.
+ */
 static void setup_rng(void)
 {
 	struct device *dev;
 	struct rng_info *rng_info = malloc(sizeof(*rng_info));
 
+	/* Our device's privat info simply contains the /dev/random fd. */
 	rng_info->rfd = open_or_die("/dev/random", O_RDONLY);
 
-	/* The device responds to return from I/O thread. */
+	/* Create the new device. */
 	dev = new_device("rng", VIRTIO_ID_RNG);
 	dev->priv = rng_info;
 
@@ -1582,8 +1806,10 @@ static void __attribute__((noreturn)) restart_guest(void)
 {
 	unsigned int i;
 
-	/* Since we don't track all open fds, we simply close everything beyond
-	 * stderr. */
+	/*
+	 * Since we don't track all open fds, we simply close everything beyond
+	 * stderr.
+	 */
 	for (i = 3; i < FD_SETSIZE; i++)
 		close(i);
 
@@ -1594,8 +1820,10 @@ static void __attribute__((noreturn)) restart_guest(void)
 	err(1, "Could not exec %s", main_args[0]);
 }
 
-/*L:220 Finally we reach the core of the Launcher which runs the Guest, serves
- * its input and output, and finally, lays it to rest. */
+/*L:220
+ * Finally we reach the core of the Launcher which runs the Guest, serves
+ * its input and output, and finally, lays it to rest.
+ */
 static void __attribute__((noreturn)) run_guest(void)
 {
 	for (;;) {
@@ -1630,7 +1858,7 @@ static void __attribute__((noreturn)) run_guest(void)
  *
  * Are you ready?  Take a deep breath and join me in the core of the Host, in
  * "make Host".
- :*/
+:*/
 
 static struct option opts[] = {
 	{ "verbose", 0, NULL, 'v' },
@@ -1651,8 +1879,7 @@ static void usage(void)
 /*L:105 The main routine is where the real work begins: */
 int main(int argc, char *argv[])
 {
-	/* Memory, top-level pagetable, code startpoint and size of the
-	 * (optional) initrd. */
+	/* Memory, code startpoint and size of the (optional) initrd. */
 	unsigned long mem = 0, start, initrd_size = 0;
 	/* Two temporaries. */
 	int i, c;
@@ -1664,24 +1891,32 @@ int main(int argc, char *argv[])
 	/* Save the args: we "reboot" by execing ourselves again. */
 	main_args = argv;
 
-	/* First we initialize the device list.  We keep a pointer to the last
+	/*
+	 * First we initialize the device list.  We keep a pointer to the last
 	 * device, and the next interrupt number to use for devices (1:
-	 * remember that 0 is used by the timer). */
+	 * remember that 0 is used by the timer).
+	 */
 	devices.lastdev = NULL;
 	devices.next_irq = 1;
 
+	/* We're CPU 0.  In fact, that's the only CPU possible right now. */
 	cpu_id = 0;
-	/* We need to know how much memory so we can set up the device
+
+	/*
+	 * We need to know how much memory so we can set up the device
 	 * descriptor and memory pages for the devices as we parse the command
 	 * line.  So we quickly look through the arguments to find the amount
-	 * of memory now. */
+	 * of memory now.
+	 */
 	for (i = 1; i < argc; i++) {
 		if (argv[i][0] != '-') {
 			mem = atoi(argv[i]) * 1024 * 1024;
-			/* We start by mapping anonymous pages over all of
+			/*
+			 * We start by mapping anonymous pages over all of
 			 * guest-physical memory range.  This fills it with 0,
 			 * and ensures that the Guest won't be killed when it
-			 * tries to access it. */
+			 * tries to access it.
+			 */
 			guest_base = map_zeroed_pages(mem / getpagesize()
 						      + DEVICE_PAGES);
 			guest_limit = mem;
@@ -1714,8 +1949,10 @@ int main(int argc, char *argv[])
 			usage();
 		}
 	}
-	/* After the other arguments we expect memory and kernel image name,
-	 * followed by command line arguments for the kernel. */
+	/*
+	 * After the other arguments we expect memory and kernel image name,
+	 * followed by command line arguments for the kernel.
+	 */
 	if (optind + 2 > argc)
 		usage();
 
@@ -1733,20 +1970,26 @@ int main(int argc, char *argv[])
 	/* Map the initrd image if requested (at top of physical memory) */
 	if (initrd_name) {
 		initrd_size = load_initrd(initrd_name, mem);
-		/* These are the location in the Linux boot header where the
-		 * start and size of the initrd are expected to be found. */
+		/*
+		 * These are the location in the Linux boot header where the
+		 * start and size of the initrd are expected to be found.
+		 */
 		boot->hdr.ramdisk_image = mem - initrd_size;
 		boot->hdr.ramdisk_size = initrd_size;
 		/* The bootloader type 0xFF means "unknown"; that's OK. */
 		boot->hdr.type_of_loader = 0xFF;
 	}
 
-	/* The Linux boot header contains an "E820" memory map: ours is a
-	 * simple, single region. */
+	/*
+	 * The Linux boot header contains an "E820" memory map: ours is a
+	 * simple, single region.
+	 */
 	boot->e820_entries = 1;
 	boot->e820_map[0] = ((struct e820entry) { 0, mem, E820_RAM });
-	/* The boot header contains a command line pointer: we put the command
-	 * line after the boot header. */
+	/*
+	 * The boot header contains a command line pointer: we put the command
+	 * line after the boot header.
+	 */
 	boot->hdr.cmd_line_ptr = to_guest_phys(boot + 1);
 	/* We use a simple helper to copy the arguments separated by spaces. */
 	concat((char *)(boot + 1), argv+optind+2);
@@ -1760,11 +2003,13 @@ int main(int argc, char *argv[])
 	/* Tell the entry path not to try to reload segment registers. */
 	boot->hdr.loadflags |= KEEP_SEGMENTS;
 
-	/* We tell the kernel to initialize the Guest: this returns the open
-	 * /dev/lguest file descriptor. */
+	/*
+	 * We tell the kernel to initialize the Guest: this returns the open
+	 * /dev/lguest file descriptor.
+	 */
 	tell_kernel(start);
 
-	/* Ensure that we terminate if a child dies. */
+	/* Ensure that we terminate if a device-servicing child dies. */
 	signal(SIGCHLD, kill_launcher);
 
 	/* If we exit via err(), this kills all the threads, restores tty. */

Documentation/lockdep-design.txt

@@ -30,9 +30,9 @@ State
 The validator tracks lock-class usage history into 4n + 1 separate state bits:
 
 - 'ever held in STATE context'
-- 'ever head as readlock in STATE context'
-- 'ever head with STATE enabled'
-- 'ever head as readlock with STATE enabled'
+- 'ever held as readlock in STATE context'
+- 'ever held with STATE enabled'
+- 'ever held as readlock with STATE enabled'
 
 Where STATE can be either one of (kernel/lockdep_states.h)
  - hardirq

Documentation/networking/6pack.txt

@@ -1,7 +1,7 @@
 This is the 6pack-mini-HOWTO, written by
 
 Andreas Könsgen DG3KQ
-Internet: ajk@iehk.rwth-aachen.de
+Internet: ajk@comnets.uni-bremen.de
 AMPR-net: dg3kq@db0pra.ampr.org
 AX.25:    dg3kq@db0ach.#nrw.deu.eu
 

Documentation/powerpc/booting-without-of.txt

@@ -1238,1122 +1238,7 @@ descriptions for the SOC devices for which new nodes have been
 defined; this list will expand as more and more SOC-containing
 platforms are moved over to use the flattened-device-tree model.
 
-   a) PHY nodes
-
-   Required properties:
-
-    - device_type : Should be "ethernet-phy"
-    - interrupts : <a b> where a is the interrupt number and b is a
-      field that represents an encoding of the sense and level
-      information for the interrupt.  This should be encoded based on
-      the information in section 2) depending on the type of interrupt
-      controller you have.
-    - interrupt-parent : the phandle for the interrupt controller that
-      services interrupts for this device.
-    - reg : The ID number for the phy, usually a small integer
-    - linux,phandle :  phandle for this node; likely referenced by an
-      ethernet controller node.
-
-
-   Example:
-
-	ethernet-phy@0 {
-		linux,phandle = <2452000>
-		interrupt-parent = <40000>;
-		interrupts = <35 1>;
-		reg = <0>;
-		device_type = "ethernet-phy";
-	};
-
-
-   b) Interrupt controllers
-
-   Some SOC devices contain interrupt controllers that are different
-   from the standard Open PIC specification.  The SOC device nodes for
-   these types of controllers should be specified just like a standard
-   OpenPIC controller.  Sense and level information should be encoded
-   as specified in section 2) of this chapter for each device that
-   specifies an interrupt.
-
-   Example :
-
-	pic@40000 {
-		linux,phandle = <40000>;
-		interrupt-controller;
-		#address-cells = <0>;
-		reg = <40000 40000>;
-		compatible = "chrp,open-pic";
-		device_type = "open-pic";
-	};
-
-    c) 4xx/Axon EMAC ethernet nodes
-
-    The EMAC ethernet controller in IBM and AMCC 4xx chips, and also
-    the Axon bridge.  To operate this needs to interact with a ths
-    special McMAL DMA controller, and sometimes an RGMII or ZMII
-    interface.  In addition to the nodes and properties described
-    below, the node for the OPB bus on which the EMAC sits must have a
-    correct clock-frequency property.
-
-      i) The EMAC node itself
-
-    Required properties:
-    - device_type       : "network"
-
-    - compatible        : compatible list, contains 2 entries, first is
-			  "ibm,emac-CHIP" where CHIP is the host ASIC (440gx,
-			  405gp, Axon) and second is either "ibm,emac" or
-			  "ibm,emac4".  For Axon, thus, we have: "ibm,emac-axon",
-			  "ibm,emac4"
-    - interrupts        : <interrupt mapping for EMAC IRQ and WOL IRQ>
-    - interrupt-parent  : optional, if needed for interrupt mapping
-    - reg               : <registers mapping>
-    - local-mac-address : 6 bytes, MAC address
-    - mal-device        : phandle of the associated McMAL node
-    - mal-tx-channel    : 1 cell, index of the tx channel on McMAL associated
-			  with this EMAC
-    - mal-rx-channel    : 1 cell, index of the rx channel on McMAL associated
-			  with this EMAC
-    - cell-index        : 1 cell, hardware index of the EMAC cell on a given
-			  ASIC (typically 0x0 and 0x1 for EMAC0 and EMAC1 on
-			  each Axon chip)
-    - max-frame-size    : 1 cell, maximum frame size supported in bytes
-    - rx-fifo-size      : 1 cell, Rx fifo size in bytes for 10 and 100 Mb/sec
-			  operations.
-			  For Axon, 2048
-    - tx-fifo-size      : 1 cell, Tx fifo size in bytes for 10 and 100 Mb/sec
-			  operations.
-			  For Axon, 2048.
-    - fifo-entry-size   : 1 cell, size of a fifo entry (used to calculate
-			  thresholds).
-			  For Axon, 0x00000010
-    - mal-burst-size    : 1 cell, MAL burst size (used to calculate thresholds)
-			  in bytes.
-			  For Axon, 0x00000100 (I think ...)
-    - phy-mode          : string, mode of operations of the PHY interface.
-			  Supported values are: "mii", "rmii", "smii", "rgmii",
-			  "tbi", "gmii", rtbi", "sgmii".
-			  For Axon on CAB, it is "rgmii"
-    - mdio-device       : 1 cell, required iff using shared MDIO registers
-			  (440EP).  phandle of the EMAC to use to drive the
-			  MDIO lines for the PHY used by this EMAC.
-    - zmii-device       : 1 cell, required iff connected to a ZMII.  phandle of
-			  the ZMII device node
-    - zmii-channel      : 1 cell, required iff connected to a ZMII.  Which ZMII
-			  channel or 0xffffffff if ZMII is only used for MDIO.
-    - rgmii-device      : 1 cell, required iff connected to an RGMII. phandle
-			  of the RGMII device node.
-			  For Axon: phandle of plb5/plb4/opb/rgmii
-    - rgmii-channel     : 1 cell, required iff connected to an RGMII.  Which
-			  RGMII channel is used by this EMAC.
-			  Fox Axon: present, whatever value is appropriate for each
-			  EMAC, that is the content of the current (bogus) "phy-port"
-			  property.
-
-    Optional properties:
-    - phy-address       : 1 cell, optional, MDIO address of the PHY. If absent,
-			  a search is performed.
-    - phy-map           : 1 cell, optional, bitmap of addresses to probe the PHY
-			  for, used if phy-address is absent. bit 0x00000001 is
-			  MDIO address 0.
-			  For Axon it can be absent, though my current driver
-			  doesn't handle phy-address yet so for now, keep
-			  0x00ffffff in it.
-    - rx-fifo-size-gige : 1 cell, Rx fifo size in bytes for 1000 Mb/sec
-			  operations (if absent the value is the same as
-			  rx-fifo-size).  For Axon, either absent or 2048.
-    - tx-fifo-size-gige : 1 cell, Tx fifo size in bytes for 1000 Mb/sec
-			  operations (if absent the value is the same as
-			  tx-fifo-size). For Axon, either absent or 2048.
-    - tah-device        : 1 cell, optional. If connected to a TAH engine for
-			  offload, phandle of the TAH device node.
-    - tah-channel       : 1 cell, optional. If appropriate, channel used on the
-			  TAH engine.
-
-    Example:
-
-	EMAC0: ethernet@40000800 {
-		device_type = "network";
-		compatible = "ibm,emac-440gp", "ibm,emac";
-		interrupt-parent = <&UIC1>;
-		interrupts = <1c 4 1d 4>;
-		reg = <40000800 70>;
-		local-mac-address = [00 04 AC E3 1B 1E];
-		mal-device = <&MAL0>;
-		mal-tx-channel = <0 1>;
-		mal-rx-channel = <0>;
-		cell-index = <0>;
-		max-frame-size = <5dc>;
-		rx-fifo-size = <1000>;
-		tx-fifo-size = <800>;
-		phy-mode = "rmii";
-		phy-map = <00000001>;
-		zmii-device = <&ZMII0>;
-		zmii-channel = <0>;
-	};
-
-      ii) McMAL node
-
-    Required properties:
-    - device_type        : "dma-controller"
-    - compatible         : compatible list, containing 2 entries, first is
-			   "ibm,mcmal-CHIP" where CHIP is the host ASIC (like
-			   emac) and the second is either "ibm,mcmal" or
-			   "ibm,mcmal2".
-			   For Axon, "ibm,mcmal-axon","ibm,mcmal2"
-    - interrupts         : <interrupt mapping for the MAL interrupts sources:
-                           5 sources: tx_eob, rx_eob, serr, txde, rxde>.
-                           For Axon: This is _different_ from the current
-			   firmware.  We use the "delayed" interrupts for txeob
-			   and rxeob. Thus we end up with mapping those 5 MPIC
-			   interrupts, all level positive sensitive: 10, 11, 32,
-			   33, 34 (in decimal)
-    - dcr-reg            : < DCR registers range >
-    - dcr-parent         : if needed for dcr-reg
-    - num-tx-chans       : 1 cell, number of Tx channels
-    - num-rx-chans       : 1 cell, number of Rx channels
-
-      iii) ZMII node
-
-    Required properties:
-    - compatible         : compatible list, containing 2 entries, first is
-			   "ibm,zmii-CHIP" where CHIP is the host ASIC (like
-			   EMAC) and the second is "ibm,zmii".
-			   For Axon, there is no ZMII node.
-    - reg                : <registers mapping>
-
-      iv) RGMII node
-
-    Required properties:
-    - compatible         : compatible list, containing 2 entries, first is
-			   "ibm,rgmii-CHIP" where CHIP is the host ASIC (like
-			   EMAC) and the second is "ibm,rgmii".
-                           For Axon, "ibm,rgmii-axon","ibm,rgmii"
-    - reg                : <registers mapping>
-    - revision           : as provided by the RGMII new version register if
-			   available.
-			   For Axon: 0x0000012a
-
-   d) Xilinx IP cores
-
-   The Xilinx EDK toolchain ships with a set of IP cores (devices) for use
-   in Xilinx Spartan and Virtex FPGAs.  The devices cover the whole range
-   of standard device types (network, serial, etc.) and miscellaneous
-   devices (gpio, LCD, spi, etc).  Also, since these devices are
-   implemented within the fpga fabric every instance of the device can be
-   synthesised with different options that change the behaviour.
-
-   Each IP-core has a set of parameters which the FPGA designer can use to
-   control how the core is synthesized.  Historically, the EDK tool would
-   extract the device parameters relevant to device drivers and copy them
-   into an 'xparameters.h' in the form of #define symbols.  This tells the
-   device drivers how the IP cores are configured, but it requres the kernel
-   to be recompiled every time the FPGA bitstream is resynthesized.
-
-   The new approach is to export the parameters into the device tree and
-   generate a new device tree each time the FPGA bitstream changes.  The
-   parameters which used to be exported as #defines will now become
-   properties of the device node.  In general, device nodes for IP-cores
-   will take the following form:
-
-	(name): (generic-name)@(base-address) {
-		compatible = "xlnx,(ip-core-name)-(HW_VER)"
-			     [, (list of compatible devices), ...];
-		reg = <(baseaddr) (size)>;
-		interrupt-parent = <&interrupt-controller-phandle>;
-		interrupts = < ... >;
-		xlnx,(parameter1) = "(string-value)";
-		xlnx,(parameter2) = <(int-value)>;
-	};
-
-	(generic-name):   an open firmware-style name that describes the
-			generic class of device.  Preferably, this is one word, such
-			as 'serial' or 'ethernet'.
-	(ip-core-name):	the name of the ip block (given after the BEGIN
-			directive in system.mhs).  Should be in lowercase
-			and all underscores '_' converted to dashes '-'.
-	(name):		is derived from the "PARAMETER INSTANCE" value.
-	(parameter#):	C_* parameters from system.mhs.  The C_ prefix is
-			dropped from the parameter name, the name is converted
-			to lowercase and all underscore '_' characters are
-			converted to dashes '-'.
-	(baseaddr):	the baseaddr parameter value (often named C_BASEADDR).
-	(HW_VER):	from the HW_VER parameter.
-	(size):		the address range size (often C_HIGHADDR - C_BASEADDR + 1).
-
-   Typically, the compatible list will include the exact IP core version
-   followed by an older IP core version which implements the same
-   interface or any other device with the same interface.
-
-   'reg', 'interrupt-parent' and 'interrupts' are all optional properties.
-
-   For example, the following block from system.mhs:
-
-	BEGIN opb_uartlite
-		PARAMETER INSTANCE = opb_uartlite_0
-		PARAMETER HW_VER = 1.00.b
-		PARAMETER C_BAUDRATE = 115200
-		PARAMETER C_DATA_BITS = 8
-		PARAMETER C_ODD_PARITY = 0
-		PARAMETER C_USE_PARITY = 0
-		PARAMETER C_CLK_FREQ = 50000000
-		PARAMETER C_BASEADDR = 0xEC100000
-		PARAMETER C_HIGHADDR = 0xEC10FFFF
-		BUS_INTERFACE SOPB = opb_7
-		PORT OPB_Clk = CLK_50MHz
-		PORT Interrupt = opb_uartlite_0_Interrupt
-		PORT RX = opb_uartlite_0_RX
-		PORT TX = opb_uartlite_0_TX
-		PORT OPB_Rst = sys_bus_reset_0
-	END
-
-   becomes the following device tree node:
-
-	opb_uartlite_0: serial@ec100000 {
-		device_type = "serial";
-		compatible = "xlnx,opb-uartlite-1.00.b";
-		reg = <ec100000 10000>;
-		interrupt-parent = <&opb_intc_0>;
-		interrupts = <1 0>; // got this from the opb_intc parameters
-		current-speed = <d#115200>;	// standard serial device prop
-		clock-frequency = <d#50000000>;	// standard serial device prop
-		xlnx,data-bits = <8>;
-		xlnx,odd-parity = <0>;
-		xlnx,use-parity = <0>;
-	};
-
-   Some IP cores actually implement 2 or more logical devices.  In
-   this case, the device should still describe the whole IP core with
-   a single node and add a child node for each logical device.  The
-   ranges property can be used to translate from parent IP-core to the
-   registers of each device.  In addition, the parent node should be
-   compatible with the bus type 'xlnx,compound', and should contain
-   #address-cells and #size-cells, as with any other bus.  (Note: this
-   makes the assumption that both logical devices have the same bus
-   binding.  If this is not true, then separate nodes should be used
-   for each logical device).  The 'cell-index' property can be used to
-   enumerate logical devices within an IP core.  For example, the
-   following is the system.mhs entry for the dual ps2 controller found
-   on the ml403 reference design.
-
-	BEGIN opb_ps2_dual_ref
-		PARAMETER INSTANCE = opb_ps2_dual_ref_0
-		PARAMETER HW_VER = 1.00.a
-		PARAMETER C_BASEADDR = 0xA9000000
-		PARAMETER C_HIGHADDR = 0xA9001FFF
-		BUS_INTERFACE SOPB = opb_v20_0
-		PORT Sys_Intr1 = ps2_1_intr
-		PORT Sys_Intr2 = ps2_2_intr
-		PORT Clkin1 = ps2_clk_rx_1
-		PORT Clkin2 = ps2_clk_rx_2
-		PORT Clkpd1 = ps2_clk_tx_1
-		PORT Clkpd2 = ps2_clk_tx_2
-		PORT Rx1 = ps2_d_rx_1
-		PORT Rx2 = ps2_d_rx_2
-		PORT Txpd1 = ps2_d_tx_1
-		PORT Txpd2 = ps2_d_tx_2
-	END
-
-   It would result in the following device tree nodes:
-
-	opb_ps2_dual_ref_0: opb-ps2-dual-ref@a9000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "xlnx,compound";
-		ranges = <0 a9000000 2000>;
-		// If this device had extra parameters, then they would
-		// go here.
-		ps2@0 {
-			compatible = "xlnx,opb-ps2-dual-ref-1.00.a";
-			reg = <0 40>;
-			interrupt-parent = <&opb_intc_0>;
-			interrupts = <3 0>;
-			cell-index = <0>;
-		};
-		ps2@1000 {
-			compatible = "xlnx,opb-ps2-dual-ref-1.00.a";
-			reg = <1000 40>;
-			interrupt-parent = <&opb_intc_0>;
-			interrupts = <3 0>;
-			cell-index = <0>;
-		};
-	};
-
-   Also, the system.mhs file defines bus attachments from the processor
-   to the devices.  The device tree structure should reflect the bus
-   attachments.  Again an example; this system.mhs fragment:
-
-	BEGIN ppc405_virtex4
-		PARAMETER INSTANCE = ppc405_0
-		PARAMETER HW_VER = 1.01.a
-		BUS_INTERFACE DPLB = plb_v34_0
-		BUS_INTERFACE IPLB = plb_v34_0
-	END
-
-	BEGIN opb_intc
-		PARAMETER INSTANCE = opb_intc_0
-		PARAMETER HW_VER = 1.00.c
-		PARAMETER C_BASEADDR = 0xD1000FC0
-		PARAMETER C_HIGHADDR = 0xD1000FDF
-		BUS_INTERFACE SOPB = opb_v20_0
-	END
-
-	BEGIN opb_uart16550
-		PARAMETER INSTANCE = opb_uart16550_0
-		PARAMETER HW_VER = 1.00.d
-		PARAMETER C_BASEADDR = 0xa0000000
-		PARAMETER C_HIGHADDR = 0xa0001FFF
-		BUS_INTERFACE SOPB = opb_v20_0
-	END
-
-	BEGIN plb_v34
-		PARAMETER INSTANCE = plb_v34_0
-		PARAMETER HW_VER = 1.02.a
-	END
-
-	BEGIN plb_bram_if_cntlr
-		PARAMETER INSTANCE = plb_bram_if_cntlr_0
-		PARAMETER HW_VER = 1.00.b
-		PARAMETER C_BASEADDR = 0xFFFF0000
-		PARAMETER C_HIGHADDR = 0xFFFFFFFF
-		BUS_INTERFACE SPLB = plb_v34_0
-	END
-
-	BEGIN plb2opb_bridge
-		PARAMETER INSTANCE = plb2opb_bridge_0
-		PARAMETER HW_VER = 1.01.a
-		PARAMETER C_RNG0_BASEADDR = 0x20000000
-		PARAMETER C_RNG0_HIGHADDR = 0x3FFFFFFF
-		PARAMETER C_RNG1_BASEADDR = 0x60000000
-		PARAMETER C_RNG1_HIGHADDR = 0x7FFFFFFF
-		PARAMETER C_RNG2_BASEADDR = 0x80000000
-		PARAMETER C_RNG2_HIGHADDR = 0xBFFFFFFF
-		PARAMETER C_RNG3_BASEADDR = 0xC0000000
-		PARAMETER C_RNG3_HIGHADDR = 0xDFFFFFFF
-		BUS_INTERFACE SPLB = plb_v34_0
-		BUS_INTERFACE MOPB = opb_v20_0
-	END
-
-   Gives this device tree (some properties removed for clarity):
-
-	plb@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "xlnx,plb-v34-1.02.a";
-		device_type = "ibm,plb";
-		ranges; // 1:1 translation
-
-		plb_bram_if_cntrl_0: bram@ffff0000 {
-			reg = <ffff0000 10000>;
-		}
-
-		opb@20000000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <20000000 20000000 20000000
-				  60000000 60000000 20000000
-				  80000000 80000000 40000000
-				  c0000000 c0000000 20000000>;
-
-			opb_uart16550_0: serial@a0000000 {
-				reg = <a00000000 2000>;
-			};
-
-			opb_intc_0: interrupt-controller@d1000fc0 {
-				reg = <d1000fc0 20>;
-			};
-		};
-	};
-
-   That covers the general approach to binding xilinx IP cores into the
-   device tree.  The following are bindings for specific devices:
-
-      i) Xilinx ML300 Framebuffer
-
-      Simple framebuffer device from the ML300 reference design (also on the
-      ML403 reference design as well as others).
-
-      Optional properties:
-       - resolution = <xres yres> : pixel resolution of framebuffer.  Some
-                                    implementations use a different resolution.
-                                    Default is <d#640 d#480>
-       - virt-resolution = <xvirt yvirt> : Size of framebuffer in memory.
-                                           Default is <d#1024 d#480>.
-       - rotate-display (empty) : rotate display 180 degrees.
-
-      ii) Xilinx SystemACE
-
-      The Xilinx SystemACE device is used to program FPGAs from an FPGA
-      bitstream stored on a CF card.  It can also be used as a generic CF
-      interface device.
-
-      Optional properties:
-       - 8-bit (empty) : Set this property for SystemACE in 8 bit mode
-
-      iii) Xilinx EMAC and Xilinx TEMAC
-
-      Xilinx Ethernet devices.  In addition to general xilinx properties
-      listed above, nodes for these devices should include a phy-handle
-      property, and may include other common network device properties
-      like local-mac-address.
-
-      iv) Xilinx Uartlite
-
-      Xilinx uartlite devices are simple fixed speed serial ports.
-
-      Required properties:
-       - current-speed : Baud rate of uartlite
-
-      v) Xilinx hwicap
-
-		Xilinx hwicap devices provide access to the configuration logic
-		of the FPGA through the Internal Configuration Access Port
-		(ICAP).  The ICAP enables partial reconfiguration of the FPGA,
-		readback of the configuration information, and some control over
-		'warm boots' of the FPGA fabric.
-
-		Required properties:
-		- xlnx,family : The family of the FPGA, necessary since the
-                      capabilities of the underlying ICAP hardware
-                      differ between different families.  May be
-                      'virtex2p', 'virtex4', or 'virtex5'.
-
-      vi) Xilinx Uart 16550
-
-      Xilinx UART 16550 devices are very similar to the NS16550 but with
-      different register spacing and an offset from the base address.
-
-      Required properties:
-       - clock-frequency : Frequency of the clock input
-       - reg-offset : A value of 3 is required
-       - reg-shift : A value of 2 is required
-
-    e) USB EHCI controllers
-
-    Required properties:
-      - compatible : should be "usb-ehci".
-      - reg : should contain at least address and length of the standard EHCI
-        register set for the device. Optional platform-dependent registers
-        (debug-port or other) can be also specified here, but only after
-        definition of standard EHCI registers.
-      - interrupts : one EHCI interrupt should be described here.
-    If device registers are implemented in big endian mode, the device
-    node should have "big-endian-regs" property.
-    If controller implementation operates with big endian descriptors,
-    "big-endian-desc" property should be specified.
-    If both big endian registers and descriptors are used by the controller
-    implementation, "big-endian" property can be specified instead of having
-    both "big-endian-regs" and "big-endian-desc".
-
-     Example (Sequoia 440EPx):
-	    ehci@e0000300 {
-		   compatible = "ibm,usb-ehci-440epx", "usb-ehci";
-		   interrupt-parent = <&UIC0>;
-		   interrupts = <1a 4>;
-		   reg = <0 e0000300 90 0 e0000390 70>;
-		   big-endian;
-	   };
-
-   f) MDIO on GPIOs
-
-   Currently defined compatibles:
-   - virtual,gpio-mdio
-
-   MDC and MDIO lines connected to GPIO controllers are listed in the
-   gpios property as described in section VIII.1 in the following order:
-
-   MDC, MDIO.
-
-   Example:
-
-	mdio {
-		compatible = "virtual,mdio-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		gpios = <&qe_pio_a 11
-			 &qe_pio_c 6>;
-	};
-
-    g) SPI (Serial Peripheral Interface) busses
-
-    SPI busses can be described with a node for the SPI master device
-    and a set of child nodes for each SPI slave on the bus.  For this
-    discussion, it is assumed that the system's SPI controller is in
-    SPI master mode.  This binding does not describe SPI controllers
-    in slave mode.
-
-    The SPI master node requires the following properties:
-    - #address-cells  - number of cells required to define a chip select
-			address on the SPI bus.
-    - #size-cells     - should be zero.
-    - compatible      - name of SPI bus controller following generic names
-			recommended practice.
-    No other properties are required in the SPI bus node.  It is assumed
-    that a driver for an SPI bus device will understand that it is an SPI bus.
-    However, the binding does not attempt to define the specific method for
-    assigning chip select numbers.  Since SPI chip select configuration is
-    flexible and non-standardized, it is left out of this binding with the
-    assumption that board specific platform code will be used to manage
-    chip selects.  Individual drivers can define additional properties to
-    support describing the chip select layout.
-
-    SPI slave nodes must be children of the SPI master node and can
-    contain the following properties.
-    - reg             - (required) chip select address of device.
-    - compatible      - (required) name of SPI device following generic names
-			recommended practice
-    - spi-max-frequency - (required) Maximum SPI clocking speed of device in Hz
-    - spi-cpol        - (optional) Empty property indicating device requires
-			inverse clock polarity (CPOL) mode
-    - spi-cpha        - (optional) Empty property indicating device requires
-			shifted clock phase (CPHA) mode
-    - spi-cs-high     - (optional) Empty property indicating device requires
-			chip select active high
-
-    SPI example for an MPC5200 SPI bus:
-		spi@f00 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
-			reg = <0xf00 0x20>;
-			interrupts = <2 13 0 2 14 0>;
-			interrupt-parent = <&mpc5200_pic>;
-
-			ethernet-switch@0 {
-				compatible = "micrel,ks8995m";
-				spi-max-frequency = <1000000>;
-				reg = <0>;
-			};
-
-			codec@1 {
-				compatible = "ti,tlv320aic26";
-				spi-max-frequency = <100000>;
-				reg = <1>;
-			};
-		};
-
-VII - Marvell Discovery mv64[345]6x System Controller chips
-===========================================================
-
-The Marvell mv64[345]60 series of system controller chips contain
-many of the peripherals needed to implement a complete computer
-system.  In this section, we define device tree nodes to describe
-the system controller chip itself and each of the peripherals
-which it contains.  Compatible string values for each node are
-prefixed with the string "marvell,", for Marvell Technology Group Ltd.
-
-1) The /system-controller node
-
-  This node is used to represent the system-controller and must be
-  present when the system uses a system controller chip. The top-level
-  system-controller node contains information that is global to all
-  devices within the system controller chip. The node name begins
-  with "system-controller" followed by the unit address, which is
-  the base address of the memory-mapped register set for the system
-  controller chip.
-
-  Required properties:
-
-    - ranges : Describes the translation of system controller addresses
-      for memory mapped registers.
-    - clock-frequency: Contains the main clock frequency for the system
-      controller chip.
-    - reg : This property defines the address and size of the
-      memory-mapped registers contained within the system controller
-      chip.  The address specified in the "reg" property should match
-      the unit address of the system-controller node.
-    - #address-cells : Address representation for system controller
-      devices.  This field represents the number of cells needed to
-      represent the address of the memory-mapped registers of devices
-      within the system controller chip.
-    - #size-cells : Size representation for for the memory-mapped
-      registers within the system controller chip.
-    - #interrupt-cells : Defines the width of cells used to represent
-      interrupts.
-
-  Optional properties:
-
-    - model : The specific model of the system controller chip.  Such
-      as, "mv64360", "mv64460", or "mv64560".
-    - compatible : A string identifying the compatibility identifiers
-      of the system controller chip.
-
-  The system-controller node contains child nodes for each system
-  controller device that the platform uses.  Nodes should not be created
-  for devices which exist on the system controller chip but are not used
-
-  Example Marvell Discovery mv64360 system-controller node:
-
-    system-controller@f1000000 { /* Marvell Discovery mv64360 */
-	    #address-cells = <1>;
-	    #size-cells = <1>;
-	    model = "mv64360";                      /* Default */
-	    compatible = "marvell,mv64360";
-	    clock-frequency = <133333333>;
-	    reg = <0xf1000000 0x10000>;
-	    virtual-reg = <0xf1000000>;
-	    ranges = <0x88000000 0x88000000 0x1000000 /* PCI 0 I/O Space */
-		    0x80000000 0x80000000 0x8000000 /* PCI 0 MEM Space */
-		    0xa0000000 0xa0000000 0x4000000 /* User FLASH */
-		    0x00000000 0xf1000000 0x0010000 /* Bridge's regs */
-		    0xf2000000 0xf2000000 0x0040000>;/* Integrated SRAM */
-
-	    [ child node definitions... ]
-    }
-
-2) Child nodes of /system-controller
-
-   a) Marvell Discovery MDIO bus
-
-   The MDIO is a bus to which the PHY devices are connected.  For each
-   device that exists on this bus, a child node should be created.  See
-   the definition of the PHY node below for an example of how to define
-   a PHY.
-
-   Required properties:
-     - #address-cells : Should be <1>
-     - #size-cells : Should be <0>
-     - device_type : Should be "mdio"
-     - compatible : Should be "marvell,mv64360-mdio"
-
-   Example:
-
-     mdio {
-	     #address-cells = <1>;
-	     #size-cells = <0>;
-	     device_type = "mdio";
-	     compatible = "marvell,mv64360-mdio";
-
-	     ethernet-phy@0 {
-		     ......
-	     };
-     };
-
-
-   b) Marvell Discovery ethernet controller
-
-   The Discover ethernet controller is described with two levels
-   of nodes.  The first level describes an ethernet silicon block
-   and the second level describes up to 3 ethernet nodes within
-   that block.  The reason for the multiple levels is that the
-   registers for the node are interleaved within a single set
-   of registers.  The "ethernet-block" level describes the
-   shared register set, and the "ethernet" nodes describe ethernet
-   port-specific properties.
-
-   Ethernet block node
-
-   Required properties:
-     - #address-cells : <1>
-     - #size-cells : <0>
-     - compatible : "marvell,mv64360-eth-block"
-     - reg : Offset and length of the register set for this block
-
-   Example Discovery Ethernet block node:
-     ethernet-block@2000 {
-	     #address-cells = <1>;
-	     #size-cells = <0>;
-	     compatible = "marvell,mv64360-eth-block";
-	     reg = <0x2000 0x2000>;
-	     ethernet@0 {
-		     .......
-	     };
-     };
-
-   Ethernet port node
-
-   Required properties:
-     - device_type : Should be "network".
-     - compatible : Should be "marvell,mv64360-eth".
-     - reg : Should be <0>, <1>, or <2>, according to which registers
-       within the silicon block the device uses.
-     - interrupts : <a> where a is the interrupt number for the port.
-     - interrupt-parent : the phandle for the interrupt controller
-       that services interrupts for this device.
-     - phy : the phandle for the PHY connected to this ethernet
-       controller.
-     - local-mac-address : 6 bytes, MAC address
-
-   Example Discovery Ethernet port node:
-     ethernet@0 {
-	     device_type = "network";
-	     compatible = "marvell,mv64360-eth";
-	     reg = <0>;
-	     interrupts = <32>;
-	     interrupt-parent = <&PIC>;
-	     phy = <&PHY0>;
-	     local-mac-address = [ 00 00 00 00 00 00 ];
-     };
-
-
-
-   c) Marvell Discovery PHY nodes
-
-   Required properties:
-     - device_type : Should be "ethernet-phy"
-     - interrupts : <a> where a is the interrupt number for this phy.
-     - interrupt-parent : the phandle for the interrupt controller that
-       services interrupts for this device.
-     - reg : The ID number for the phy, usually a small integer
-
-   Example Discovery PHY node:
-     ethernet-phy@1 {
-	     device_type = "ethernet-phy";
-	     compatible = "broadcom,bcm5421";
-	     interrupts = <76>;      /* GPP 12 */
-	     interrupt-parent = <&PIC>;
-	     reg = <1>;
-     };
-
-
-   d) Marvell Discovery SDMA nodes
-
-   Represent DMA hardware associated with the MPSC (multiprotocol
-   serial controllers).
-
-   Required properties:
-     - compatible : "marvell,mv64360-sdma"
-     - reg : Offset and length of the register set for this device
-     - interrupts : <a> where a is the interrupt number for the DMA
-       device.
-     - interrupt-parent : the phandle for the interrupt controller
-       that services interrupts for this device.
-
-   Example Discovery SDMA node:
-     sdma@4000 {
-	     compatible = "marvell,mv64360-sdma";
-	     reg = <0x4000 0xc18>;
-	     virtual-reg = <0xf1004000>;
-	     interrupts = <36>;
-	     interrupt-parent = <&PIC>;
-     };
-
-
-   e) Marvell Discovery BRG nodes
-
-   Represent baud rate generator hardware associated with the MPSC
-   (multiprotocol serial controllers).
-
-   Required properties:
-     - compatible : "marvell,mv64360-brg"
-     - reg : Offset and length of the register set for this device
-     - clock-src : A value from 0 to 15 which selects the clock
-       source for the baud rate generator.  This value corresponds
-       to the CLKS value in the BRGx configuration register.  See
-       the mv64x60 User's Manual.
-     - clock-frequence : The frequency (in Hz) of the baud rate
-       generator's input clock.
-     - current-speed : The current speed setting (presumably by
-       firmware) of the baud rate generator.
-
-   Example Discovery BRG node:
-     brg@b200 {
-	     compatible = "marvell,mv64360-brg";
-	     reg = <0xb200 0x8>;
-	     clock-src = <8>;
-	     clock-frequency = <133333333>;
-	     current-speed = <9600>;
-     };
-
-
-   f) Marvell Discovery CUNIT nodes
-
-   Represent the Serial Communications Unit device hardware.
-
-   Required properties:
-     - reg : Offset and length of the register set for this device
-
-   Example Discovery CUNIT node:
-     cunit@f200 {
-	     reg = <0xf200 0x200>;
-     };
-
-
-   g) Marvell Discovery MPSCROUTING nodes
-
-   Represent the Discovery's MPSC routing hardware
-
-   Required properties:
-     - reg : Offset and length of the register set for this device
-
-   Example Discovery CUNIT node:
-     mpscrouting@b500 {
-	     reg = <0xb400 0xc>;
-     };
-
-
-   h) Marvell Discovery MPSCINTR nodes
-
-   Represent the Discovery's MPSC DMA interrupt hardware registers
-   (SDMA cause and mask registers).
-
-   Required properties:
-     - reg : Offset and length of the register set for this device
-
-   Example Discovery MPSCINTR node:
-     mpsintr@b800 {
-	     reg = <0xb800 0x100>;
-     };
-
-
-   i) Marvell Discovery MPSC nodes
-
-   Represent the Discovery's MPSC (Multiprotocol Serial Controller)
-   serial port.
-
-   Required properties:
-     - device_type : "serial"
-     - compatible : "marvell,mv64360-mpsc"
-     - reg : Offset and length of the register set for this device
-     - sdma : the phandle for the SDMA node used by this port
-     - brg : the phandle for the BRG node used by this port
-     - cunit : the phandle for the CUNIT node used by this port
-     - mpscrouting : the phandle for the MPSCROUTING node used by this port
-     - mpscintr : the phandle for the MPSCINTR node used by this port
-     - cell-index : the hardware index of this cell in the MPSC core
-     - max_idle : value needed for MPSC CHR3 (Maximum Frame Length)
-       register
-     - interrupts : <a> where a is the interrupt number for the MPSC.
-     - interrupt-parent : the phandle for the interrupt controller
-       that services interrupts for this device.
-
-   Example Discovery MPSCINTR node:
-     mpsc@8000 {
-	     device_type = "serial";
-	     compatible = "marvell,mv64360-mpsc";
-	     reg = <0x8000 0x38>;
-	     virtual-reg = <0xf1008000>;
-	     sdma = <&SDMA0>;
-	     brg = <&BRG0>;
-	     cunit = <&CUNIT>;
-	     mpscrouting = <&MPSCROUTING>;
-	     mpscintr = <&MPSCINTR>;
-	     cell-index = <0>;
-	     max_idle = <40>;
-	     interrupts = <40>;
-	     interrupt-parent = <&PIC>;
-     };
-
-
-   j) Marvell Discovery Watch Dog Timer nodes
-
-   Represent the Discovery's watchdog timer hardware
-
-   Required properties:
-     - compatible : "marvell,mv64360-wdt"
-     - reg : Offset and length of the register set for this device
-
-   Example Discovery Watch Dog Timer node:
-     wdt@b410 {
-	     compatible = "marvell,mv64360-wdt";
-	     reg = <0xb410 0x8>;
-     };
-
-
-   k) Marvell Discovery I2C nodes
-
-   Represent the Discovery's I2C hardware
-
-   Required properties:
-     - device_type : "i2c"
-     - compatible : "marvell,mv64360-i2c"
-     - reg : Offset and length of the register set for this device
-     - interrupts : <a> where a is the interrupt number for the I2C.
-     - interrupt-parent : the phandle for the interrupt controller
-       that services interrupts for this device.
-
-   Example Discovery I2C node:
-	     compatible = "marvell,mv64360-i2c";
-	     reg = <0xc000 0x20>;
-	     virtual-reg = <0xf100c000>;
-	     interrupts = <37>;
-	     interrupt-parent = <&PIC>;
-     };
-
-
-   l) Marvell Discovery PIC (Programmable Interrupt Controller) nodes
-
-   Represent the Discovery's PIC hardware
-
-   Required properties:
-     - #interrupt-cells : <1>
-     - #address-cells : <0>
-     - compatible : "marvell,mv64360-pic"
-     - reg : Offset and length of the register set for this device
-     - interrupt-controller
-
-   Example Discovery PIC node:
-     pic {
-	     #interrupt-cells = <1>;
-	     #address-cells = <0>;
-	     compatible = "marvell,mv64360-pic";
-	     reg = <0x0 0x88>;
-	     interrupt-controller;
-     };
-
-
-   m) Marvell Discovery MPP (Multipurpose Pins) multiplexing nodes
-
-   Represent the Discovery's MPP hardware
-
-   Required properties:
-     - compatible : "marvell,mv64360-mpp"
-     - reg : Offset and length of the register set for this device
-
-   Example Discovery MPP node:
-     mpp@f000 {
-	     compatible = "marvell,mv64360-mpp";
-	     reg = <0xf000 0x10>;
-     };
-
-
-   n) Marvell Discovery GPP (General Purpose Pins) nodes
-
-   Represent the Discovery's GPP hardware
-
-   Required properties:
-     - compatible : "marvell,mv64360-gpp"
-     - reg : Offset and length of the register set for this device
-
-   Example Discovery GPP node:
-     gpp@f000 {
-	     compatible = "marvell,mv64360-gpp";
-	     reg = <0xf100 0x20>;
-     };
-
-
-   o) Marvell Discovery PCI host bridge node
-
-   Represents the Discovery's PCI host bridge device.  The properties
-   for this node conform to Rev 2.1 of the PCI Bus Binding to IEEE
-   1275-1994.  A typical value for the compatible property is
-   "marvell,mv64360-pci".
-
-   Example Discovery PCI host bridge node
-     pci@80000000 {
-	     #address-cells = <3>;
-	     #size-cells = <2>;
-	     #interrupt-cells = <1>;
-	     device_type = "pci";
-	     compatible = "marvell,mv64360-pci";
-	     reg = <0xcf8 0x8>;
-	     ranges = <0x01000000 0x0        0x0
-			     0x88000000 0x0 0x01000000
-		       0x02000000 0x0 0x80000000
-			     0x80000000 0x0 0x08000000>;
-	     bus-range = <0 255>;
-	     clock-frequency = <66000000>;
-	     interrupt-parent = <&PIC>;
-	     interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-	     interrupt-map = <
-		     /* IDSEL 0x0a */
-		     0x5000 0 0 1 &PIC 80
-		     0x5000 0 0 2 &PIC 81
-		     0x5000 0 0 3 &PIC 91
-		     0x5000 0 0 4 &PIC 93
-
-		     /* IDSEL 0x0b */
-		     0x5800 0 0 1 &PIC 91
-		     0x5800 0 0 2 &PIC 93
-		     0x5800 0 0 3 &PIC 80
-		     0x5800 0 0 4 &PIC 81
-
-		     /* IDSEL 0x0c */
-		     0x6000 0 0 1 &PIC 91
-		     0x6000 0 0 2 &PIC 93
-		     0x6000 0 0 3 &PIC 80
-		     0x6000 0 0 4 &PIC 81
-
-		     /* IDSEL 0x0d */
-		     0x6800 0 0 1 &PIC 93
-		     0x6800 0 0 2 &PIC 80
-		     0x6800 0 0 3 &PIC 81
-		     0x6800 0 0 4 &PIC 91
-	     >;
-     };
-
-
-   p) Marvell Discovery CPU Error nodes
-
-   Represent the Discovery's CPU error handler device.
-
-   Required properties:
-     - compatible : "marvell,mv64360-cpu-error"
-     - reg : Offset and length of the register set for this device
-     - interrupts : the interrupt number for this device
-     - interrupt-parent : the phandle for the interrupt controller
-       that services interrupts for this device.
-
-   Example Discovery CPU Error node:
-     cpu-error@0070 {
-	     compatible = "marvell,mv64360-cpu-error";
-	     reg = <0x70 0x10 0x128 0x28>;
-	     interrupts = <3>;
-	     interrupt-parent = <&PIC>;
-     };
-
-
-   q) Marvell Discovery SRAM Controller nodes
-
-   Represent the Discovery's SRAM controller device.
-
-   Required properties:
-     - compatible : "marvell,mv64360-sram-ctrl"
-     - reg : Offset and length of the register set for this device
-     - interrupts : the interrupt number for this device
-     - interrupt-parent : the phandle for the interrupt controller
-       that services interrupts for this device.
-
-   Example Discovery SRAM Controller node:
-     sram-ctrl@0380 {
-	     compatible = "marvell,mv64360-sram-ctrl";
-	     reg = <0x380 0x80>;
-	     interrupts = <13>;
-	     interrupt-parent = <&PIC>;
-     };
-
-
-   r) Marvell Discovery PCI Error Handler nodes
-
-   Represent the Discovery's PCI error handler device.
-
-   Required properties:
-     - compatible : "marvell,mv64360-pci-error"
-     - reg : Offset and length of the register set for this device
-     - interrupts : the interrupt number for this device
-     - interrupt-parent : the phandle for the interrupt controller
-       that services interrupts for this device.
-
-   Example Discovery PCI Error Handler node:
-     pci-error@1d40 {
-	     compatible = "marvell,mv64360-pci-error";
-	     reg = <0x1d40 0x40 0xc28 0x4>;
-	     interrupts = <12>;
-	     interrupt-parent = <&PIC>;
-     };
-
-
-   s) Marvell Discovery Memory Controller nodes
-
-   Represent the Discovery's memory controller device.
-
-   Required properties:
-     - compatible : "marvell,mv64360-mem-ctrl"
-     - reg : Offset and length of the register set for this device
-     - interrupts : the interrupt number for this device
-     - interrupt-parent : the phandle for the interrupt controller
-       that services interrupts for this device.
-
-   Example Discovery Memory Controller node:
-     mem-ctrl@1400 {
-	     compatible = "marvell,mv64360-mem-ctrl";
-	     reg = <0x1400 0x60>;
-	     interrupts = <17>;
-	     interrupt-parent = <&PIC>;
-     };
-
-
-VIII - Specifying interrupt information for devices
+VII - Specifying interrupt information for devices
 ===================================================
 
 The device tree represents the busses and devices of a hardware
@@ -2439,56 +1324,7 @@ encodings listed below:
 	2 =  high to low edge sensitive type enabled
 	3 =  low to high edge sensitive type enabled
 
-IX - Specifying GPIO information for devices
-============================================
-
-1) gpios property
------------------
-
-Nodes that makes use of GPIOs should define them using `gpios' property,
-format of which is: <&gpio-controller1-phandle gpio1-specifier
-		     &gpio-controller2-phandle gpio2-specifier
-		     0 /* holes are permitted, means no GPIO 3 */
-		     &gpio-controller4-phandle gpio4-specifier
-		     ...>;
-
-Note that gpio-specifier length is controller dependent.
-
-gpio-specifier may encode: bank, pin position inside the bank,
-whether pin is open-drain and whether pin is logically inverted.
-
-Example of the node using GPIOs:
-
-	node {
-		gpios = <&qe_pio_e 18 0>;
-	};
-
-In this example gpio-specifier is "18 0" and encodes GPIO pin number,
-and empty GPIO flags as accepted by the "qe_pio_e" gpio-controller.
-
-2) gpio-controller nodes
-------------------------
-
-Every GPIO controller node must have #gpio-cells property defined,
-this information will be used to translate gpio-specifiers.
-
-Example of two SOC GPIO banks defined as gpio-controller nodes:
-
-	qe_pio_a: gpio-controller@1400 {
-		#gpio-cells = <2>;
-		compatible = "fsl,qe-pario-bank-a", "fsl,qe-pario-bank";
-		reg = <0x1400 0x18>;
-		gpio-controller;
-	};
-
-	qe_pio_e: gpio-controller@1460 {
-		#gpio-cells = <2>;
-		compatible = "fsl,qe-pario-bank-e", "fsl,qe-pario-bank";
-		reg = <0x1460 0x18>;
-		gpio-controller;
-	};
-
-X - Specifying Device Power Management Information (sleep property)
+VIII - Specifying Device Power Management Information (sleep property)
 ===================================================================
 
 Devices on SOCs often have mechanisms for placing devices into low-power

Documentation/powerpc/dts-bindings/4xx/emac.txt

@@ -0,0 +1,148 @@
+    4xx/Axon EMAC ethernet nodes
+
+    The EMAC ethernet controller in IBM and AMCC 4xx chips, and also
+    the Axon bridge.  To operate this needs to interact with a ths
+    special McMAL DMA controller, and sometimes an RGMII or ZMII
+    interface.  In addition to the nodes and properties described
+    below, the node for the OPB bus on which the EMAC sits must have a
+    correct clock-frequency property.
+
+      i) The EMAC node itself
+
+    Required properties:
+    - device_type       : "network"
+
+    - compatible        : compatible list, contains 2 entries, first is
+			  "ibm,emac-CHIP" where CHIP is the host ASIC (440gx,
+			  405gp, Axon) and second is either "ibm,emac" or
+			  "ibm,emac4".  For Axon, thus, we have: "ibm,emac-axon",
+			  "ibm,emac4"
+    - interrupts        : <interrupt mapping for EMAC IRQ and WOL IRQ>
+    - interrupt-parent  : optional, if needed for interrupt mapping
+    - reg               : <registers mapping>
+    - local-mac-address : 6 bytes, MAC address
+    - mal-device        : phandle of the associated McMAL node
+    - mal-tx-channel    : 1 cell, index of the tx channel on McMAL associated
+			  with this EMAC
+    - mal-rx-channel    : 1 cell, index of the rx channel on McMAL associated
+			  with this EMAC
+    - cell-index        : 1 cell, hardware index of the EMAC cell on a given
+			  ASIC (typically 0x0 and 0x1 for EMAC0 and EMAC1 on
+			  each Axon chip)
+    - max-frame-size    : 1 cell, maximum frame size supported in bytes
+    - rx-fifo-size      : 1 cell, Rx fifo size in bytes for 10 and 100 Mb/sec
+			  operations.
+			  For Axon, 2048
+    - tx-fifo-size      : 1 cell, Tx fifo size in bytes for 10 and 100 Mb/sec
+			  operations.
+			  For Axon, 2048.
+    - fifo-entry-size   : 1 cell, size of a fifo entry (used to calculate
+			  thresholds).
+			  For Axon, 0x00000010
+    - mal-burst-size    : 1 cell, MAL burst size (used to calculate thresholds)
+			  in bytes.
+			  For Axon, 0x00000100 (I think ...)
+    - phy-mode          : string, mode of operations of the PHY interface.
+			  Supported values are: "mii", "rmii", "smii", "rgmii",
+			  "tbi", "gmii", rtbi", "sgmii".
+			  For Axon on CAB, it is "rgmii"
+    - mdio-device       : 1 cell, required iff using shared MDIO registers
+			  (440EP).  phandle of the EMAC to use to drive the
+			  MDIO lines for the PHY used by this EMAC.
+    - zmii-device       : 1 cell, required iff connected to a ZMII.  phandle of
+			  the ZMII device node
+    - zmii-channel      : 1 cell, required iff connected to a ZMII.  Which ZMII
+			  channel or 0xffffffff if ZMII is only used for MDIO.
+    - rgmii-device      : 1 cell, required iff connected to an RGMII. phandle
+			  of the RGMII device node.
+			  For Axon: phandle of plb5/plb4/opb/rgmii
+    - rgmii-channel     : 1 cell, required iff connected to an RGMII.  Which
+			  RGMII channel is used by this EMAC.
+			  Fox Axon: present, whatever value is appropriate for each
+			  EMAC, that is the content of the current (bogus) "phy-port"
+			  property.
+
+    Optional properties:
+    - phy-address       : 1 cell, optional, MDIO address of the PHY. If absent,
+			  a search is performed.
+    - phy-map           : 1 cell, optional, bitmap of addresses to probe the PHY
+			  for, used if phy-address is absent. bit 0x00000001 is
+			  MDIO address 0.
+			  For Axon it can be absent, though my current driver
+			  doesn't handle phy-address yet so for now, keep
+			  0x00ffffff in it.
+    - rx-fifo-size-gige : 1 cell, Rx fifo size in bytes for 1000 Mb/sec
+			  operations (if absent the value is the same as
+			  rx-fifo-size).  For Axon, either absent or 2048.
+    - tx-fifo-size-gige : 1 cell, Tx fifo size in bytes for 1000 Mb/sec
+			  operations (if absent the value is the same as
+			  tx-fifo-size). For Axon, either absent or 2048.
+    - tah-device        : 1 cell, optional. If connected to a TAH engine for
+			  offload, phandle of the TAH device node.
+    - tah-channel       : 1 cell, optional. If appropriate, channel used on the
+			  TAH engine.
+
+    Example:
+
+	EMAC0: ethernet@40000800 {
+		device_type = "network";
+		compatible = "ibm,emac-440gp", "ibm,emac";
+		interrupt-parent = <&UIC1>;
+		interrupts = <1c 4 1d 4>;
+		reg = <40000800 70>;
+		local-mac-address = [00 04 AC E3 1B 1E];
+		mal-device = <&MAL0>;
+		mal-tx-channel = <0 1>;
+		mal-rx-channel = <0>;
+		cell-index = <0>;
+		max-frame-size = <5dc>;
+		rx-fifo-size = <1000>;
+		tx-fifo-size = <800>;
+		phy-mode = "rmii";
+		phy-map = <00000001>;
+		zmii-device = <&ZMII0>;
+		zmii-channel = <0>;
+	};
+
+      ii) McMAL node
+
+    Required properties:
+    - device_type        : "dma-controller"
+    - compatible         : compatible list, containing 2 entries, first is
+			   "ibm,mcmal-CHIP" where CHIP is the host ASIC (like
+			   emac) and the second is either "ibm,mcmal" or
+			   "ibm,mcmal2".
+			   For Axon, "ibm,mcmal-axon","ibm,mcmal2"
+    - interrupts         : <interrupt mapping for the MAL interrupts sources:
+                           5 sources: tx_eob, rx_eob, serr, txde, rxde>.
+                           For Axon: This is _different_ from the current
+			   firmware.  We use the "delayed" interrupts for txeob
+			   and rxeob. Thus we end up with mapping those 5 MPIC
+			   interrupts, all level positive sensitive: 10, 11, 32,
+			   33, 34 (in decimal)
+    - dcr-reg            : < DCR registers range >
+    - dcr-parent         : if needed for dcr-reg
+    - num-tx-chans       : 1 cell, number of Tx channels
+    - num-rx-chans       : 1 cell, number of Rx channels
+
+      iii) ZMII node
+
+    Required properties:
+    - compatible         : compatible list, containing 2 entries, first is
+			   "ibm,zmii-CHIP" where CHIP is the host ASIC (like
+			   EMAC) and the second is "ibm,zmii".
+			   For Axon, there is no ZMII node.
+    - reg                : <registers mapping>
+
+      iv) RGMII node
+
+    Required properties:
+    - compatible         : compatible list, containing 2 entries, first is
+			   "ibm,rgmii-CHIP" where CHIP is the host ASIC (like
+			   EMAC) and the second is "ibm,rgmii".
+                           For Axon, "ibm,rgmii-axon","ibm,rgmii"
+    - reg                : <registers mapping>
+    - revision           : as provided by the RGMII new version register if
+			   available.
+			   For Axon: 0x0000012a
+

Documentation/powerpc/dts-bindings/gpio/gpio.txt

@@ -0,0 +1,50 @@
+Specifying GPIO information for devices
+============================================
+
+1) gpios property
+-----------------
+
+Nodes that makes use of GPIOs should define them using `gpios' property,
+format of which is: <&gpio-controller1-phandle gpio1-specifier
+		     &gpio-controller2-phandle gpio2-specifier
+		     0 /* holes are permitted, means no GPIO 3 */
+		     &gpio-controller4-phandle gpio4-specifier
+		     ...>;
+
+Note that gpio-specifier length is controller dependent.
+
+gpio-specifier may encode: bank, pin position inside the bank,
+whether pin is open-drain and whether pin is logically inverted.
+
+Example of the node using GPIOs:
+
+	node {
+		gpios = <&qe_pio_e 18 0>;
+	};
+
+In this example gpio-specifier is "18 0" and encodes GPIO pin number,
+and empty GPIO flags as accepted by the "qe_pio_e" gpio-controller.
+
+2) gpio-controller nodes
+------------------------
+
+Every GPIO controller node must have #gpio-cells property defined,
+this information will be used to translate gpio-specifiers.
+
+Example of two SOC GPIO banks defined as gpio-controller nodes:
+
+	qe_pio_a: gpio-controller@1400 {
+		#gpio-cells = <2>;
+		compatible = "fsl,qe-pario-bank-a", "fsl,qe-pario-bank";
+		reg = <0x1400 0x18>;
+		gpio-controller;
+	};
+
+	qe_pio_e: gpio-controller@1460 {
+		#gpio-cells = <2>;
+		compatible = "fsl,qe-pario-bank-e", "fsl,qe-pario-bank";
+		reg = <0x1460 0x18>;
+		gpio-controller;
+	};
+
+

Documentation/powerpc/dts-bindings/gpio/led.txt

@@ -16,10 +16,17 @@ LED sub-node properties:
   string defining the trigger assigned to the LED.  Current triggers are:
     "backlight" - LED will act as a back-light, controlled by the framebuffer
 		  system
-    "default-on" - LED will turn on
+    "default-on" - LED will turn on, but see "default-state" below
     "heartbeat" - LED "double" flashes at a load average based rate
     "ide-disk" - LED indicates disk activity
     "timer" - LED flashes at a fixed, configurable rate
+- default-state:  (optional) The initial state of the LED.  Valid
+  values are "on", "off", and "keep".  If the LED is already on or off
+  and the default-state property is set the to same value, then no
+  glitch should be produced where the LED momentarily turns off (or
+  on).  The "keep" setting will keep the LED at whatever its current
+  state is, without producing a glitch.  The default is off if this
+  property is not present.
 
 Examples:
 
@@ -30,14 +37,22 @@ leds {
 		gpios = <&mcu_pio 0 1>; /* Active low */
 		linux,default-trigger = "ide-disk";
 	};
+
+	fault {
+		gpios = <&mcu_pio 1 0>;
+		/* Keep LED on if BIOS detected hardware fault */
+		default-state = "keep";
+	};
 };
 
 run-control {
 	compatible = "gpio-leds";
 	red {
 		gpios = <&mpc8572 6 0>;
+		default-state = "off";
 	};
 	green {
 		gpios = <&mpc8572 7 0>;
+		default-state = "on";
 	};
 }

Documentation/powerpc/dts-bindings/gpio/mdio.txt

@@ -0,0 +1,19 @@
+MDIO on GPIOs
+
+Currently defined compatibles:
+- virtual,gpio-mdio
+
+MDC and MDIO lines connected to GPIO controllers are listed in the
+gpios property as described in section VIII.1 in the following order:
+
+MDC, MDIO.
+
+Example:
+
+mdio {
+	compatible = "virtual,mdio-gpio";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	gpios = <&qe_pio_a 11
+		 &qe_pio_c 6>;
+};

Documentation/powerpc/dts-bindings/marvell.txt

@@ -0,0 +1,521 @@
+Marvell Discovery mv64[345]6x System Controller chips
+===========================================================
+
+The Marvell mv64[345]60 series of system controller chips contain
+many of the peripherals needed to implement a complete computer
+system.  In this section, we define device tree nodes to describe
+the system controller chip itself and each of the peripherals
+which it contains.  Compatible string values for each node are
+prefixed with the string "marvell,", for Marvell Technology Group Ltd.
+
+1) The /system-controller node
+
+  This node is used to represent the system-controller and must be
+  present when the system uses a system controller chip. The top-level
+  system-controller node contains information that is global to all
+  devices within the system controller chip. The node name begins
+  with "system-controller" followed by the unit address, which is
+  the base address of the memory-mapped register set for the system
+  controller chip.
+
+  Required properties:
+
+    - ranges : Describes the translation of system controller addresses
+      for memory mapped registers.
+    - clock-frequency: Contains the main clock frequency for the system
+      controller chip.
+    - reg : This property defines the address and size of the
+      memory-mapped registers contained within the system controller
+      chip.  The address specified in the "reg" property should match
+      the unit address of the system-controller node.
+    - #address-cells : Address representation for system controller
+      devices.  This field represents the number of cells needed to
+      represent the address of the memory-mapped registers of devices
+      within the system controller chip.
+    - #size-cells : Size representation for for the memory-mapped
+      registers within the system controller chip.
+    - #interrupt-cells : Defines the width of cells used to represent
+      interrupts.
+
+  Optional properties:
+
+    - model : The specific model of the system controller chip.  Such
+      as, "mv64360", "mv64460", or "mv64560".
+    - compatible : A string identifying the compatibility identifiers
+      of the system controller chip.
+
+  The system-controller node contains child nodes for each system
+  controller device that the platform uses.  Nodes should not be created
+  for devices which exist on the system controller chip but are not used
+
+  Example Marvell Discovery mv64360 system-controller node:
+
+    system-controller@f1000000 { /* Marvell Discovery mv64360 */
+	    #address-cells = <1>;
+	    #size-cells = <1>;
+	    model = "mv64360";                      /* Default */
+	    compatible = "marvell,mv64360";
+	    clock-frequency = <133333333>;
+	    reg = <0xf1000000 0x10000>;
+	    virtual-reg = <0xf1000000>;
+	    ranges = <0x88000000 0x88000000 0x1000000 /* PCI 0 I/O Space */
+		    0x80000000 0x80000000 0x8000000 /* PCI 0 MEM Space */
+		    0xa0000000 0xa0000000 0x4000000 /* User FLASH */
+		    0x00000000 0xf1000000 0x0010000 /* Bridge's regs */
+		    0xf2000000 0xf2000000 0x0040000>;/* Integrated SRAM */
+
+	    [ child node definitions... ]
+    }
+
+2) Child nodes of /system-controller
+
+   a) Marvell Discovery MDIO bus
+
+   The MDIO is a bus to which the PHY devices are connected.  For each
+   device that exists on this bus, a child node should be created.  See
+   the definition of the PHY node below for an example of how to define
+   a PHY.
+
+   Required properties:
+     - #address-cells : Should be <1>
+     - #size-cells : Should be <0>
+     - device_type : Should be "mdio"
+     - compatible : Should be "marvell,mv64360-mdio"
+
+   Example:
+
+     mdio {
+	     #address-cells = <1>;
+	     #size-cells = <0>;
+	     device_type = "mdio";
+	     compatible = "marvell,mv64360-mdio";
+
+	     ethernet-phy@0 {
+		     ......
+	     };
+     };
+
+
+   b) Marvell Discovery ethernet controller
+
+   The Discover ethernet controller is described with two levels
+   of nodes.  The first level describes an ethernet silicon block
+   and the second level describes up to 3 ethernet nodes within
+   that block.  The reason for the multiple levels is that the
+   registers for the node are interleaved within a single set
+   of registers.  The "ethernet-block" level describes the
+   shared register set, and the "ethernet" nodes describe ethernet
+   port-specific properties.
+
+   Ethernet block node
+
+   Required properties:
+     - #address-cells : <1>
+     - #size-cells : <0>
+     - compatible : "marvell,mv64360-eth-block"
+     - reg : Offset and length of the register set for this block
+
+   Example Discovery Ethernet block node:
+     ethernet-block@2000 {
+	     #address-cells = <1>;
+	     #size-cells = <0>;
+	     compatible = "marvell,mv64360-eth-block";
+	     reg = <0x2000 0x2000>;
+	     ethernet@0 {
+		     .......
+	     };
+     };
+
+   Ethernet port node
+
+   Required properties:
+     - device_type : Should be "network".
+     - compatible : Should be "marvell,mv64360-eth".
+     - reg : Should be <0>, <1>, or <2>, according to which registers
+       within the silicon block the device uses.
+     - interrupts : <a> where a is the interrupt number for the port.
+     - interrupt-parent : the phandle for the interrupt controller
+       that services interrupts for this device.
+     - phy : the phandle for the PHY connected to this ethernet
+       controller.
+     - local-mac-address : 6 bytes, MAC address
+
+   Example Discovery Ethernet port node:
+     ethernet@0 {
+	     device_type = "network";
+	     compatible = "marvell,mv64360-eth";
+	     reg = <0>;
+	     interrupts = <32>;
+	     interrupt-parent = <&PIC>;
+	     phy = <&PHY0>;
+	     local-mac-address = [ 00 00 00 00 00 00 ];
+     };
+
+
+
+   c) Marvell Discovery PHY nodes
+
+   Required properties:
+     - device_type : Should be "ethernet-phy"
+     - interrupts : <a> where a is the interrupt number for this phy.
+     - interrupt-parent : the phandle for the interrupt controller that
+       services interrupts for this device.
+     - reg : The ID number for the phy, usually a small integer
+
+   Example Discovery PHY node:
+     ethernet-phy@1 {
+	     device_type = "ethernet-phy";
+	     compatible = "broadcom,bcm5421";
+	     interrupts = <76>;      /* GPP 12 */
+	     interrupt-parent = <&PIC>;
+	     reg = <1>;
+     };
+
+
+   d) Marvell Discovery SDMA nodes
+
+   Represent DMA hardware associated with the MPSC (multiprotocol
+   serial controllers).
+
+   Required properties:
+     - compatible : "marvell,mv64360-sdma"
+     - reg : Offset and length of the register set for this device
+     - interrupts : <a> where a is the interrupt number for the DMA
+       device.
+     - interrupt-parent : the phandle for the interrupt controller
+       that services interrupts for this device.
+
+   Example Discovery SDMA node:
+     sdma@4000 {
+	     compatible = "marvell,mv64360-sdma";
+	     reg = <0x4000 0xc18>;
+	     virtual-reg = <0xf1004000>;
+	     interrupts = <36>;
+	     interrupt-parent = <&PIC>;
+     };
+
+
+   e) Marvell Discovery BRG nodes
+
+   Represent baud rate generator hardware associated with the MPSC
+   (multiprotocol serial controllers).
+
+   Required properties:
+     - compatible : "marvell,mv64360-brg"
+     - reg : Offset and length of the register set for this device
+     - clock-src : A value from 0 to 15 which selects the clock
+       source for the baud rate generator.  This value corresponds
+       to the CLKS value in the BRGx configuration register.  See
+       the mv64x60 User's Manual.
+     - clock-frequence : The frequency (in Hz) of the baud rate
+       generator's input clock.
+     - current-speed : The current speed setting (presumably by
+       firmware) of the baud rate generator.
+
+   Example Discovery BRG node:
+     brg@b200 {
+	     compatible = "marvell,mv64360-brg";
+	     reg = <0xb200 0x8>;
+	     clock-src = <8>;
+	     clock-frequency = <133333333>;
+	     current-speed = <9600>;
+     };
+
+
+   f) Marvell Discovery CUNIT nodes
+
+   Represent the Serial Communications Unit device hardware.
+
+   Required properties:
+     - reg : Offset and length of the register set for this device
+
+   Example Discovery CUNIT node:
+     cunit@f200 {
+	     reg = <0xf200 0x200>;
+     };
+
+
+   g) Marvell Discovery MPSCROUTING nodes
+
+   Represent the Discovery's MPSC routing hardware
+
+   Required properties:
+     - reg : Offset and length of the register set for this device
+
+   Example Discovery CUNIT node:
+     mpscrouting@b500 {
+	     reg = <0xb400 0xc>;
+     };
+
+
+   h) Marvell Discovery MPSCINTR nodes
+
+   Represent the Discovery's MPSC DMA interrupt hardware registers
+   (SDMA cause and mask registers).
+
+   Required properties:
+     - reg : Offset and length of the register set for this device
+
+   Example Discovery MPSCINTR node:
+     mpsintr@b800 {
+	     reg = <0xb800 0x100>;
+     };
+
+
+   i) Marvell Discovery MPSC nodes
+
+   Represent the Discovery's MPSC (Multiprotocol Serial Controller)
+   serial port.
+
+   Required properties:
+     - device_type : "serial"
+     - compatible : "marvell,mv64360-mpsc"
+     - reg : Offset and length of the register set for this device
+     - sdma : the phandle for the SDMA node used by this port
+     - brg : the phandle for the BRG node used by this port
+     - cunit : the phandle for the CUNIT node used by this port
+     - mpscrouting : the phandle for the MPSCROUTING node used by this port
+     - mpscintr : the phandle for the MPSCINTR node used by this port
+     - cell-index : the hardware index of this cell in the MPSC core
+     - max_idle : value needed for MPSC CHR3 (Maximum Frame Length)
+       register
+     - interrupts : <a> where a is the interrupt number for the MPSC.
+     - interrupt-parent : the phandle for the interrupt controller
+       that services interrupts for this device.
+
+   Example Discovery MPSCINTR node:
+     mpsc@8000 {
+	     device_type = "serial";
+	     compatible = "marvell,mv64360-mpsc";
+	     reg = <0x8000 0x38>;
+	     virtual-reg = <0xf1008000>;
+	     sdma = <&SDMA0>;
+	     brg = <&BRG0>;
+	     cunit = <&CUNIT>;
+	     mpscrouting = <&MPSCROUTING>;
+	     mpscintr = <&MPSCINTR>;
+	     cell-index = <0>;
+	     max_idle = <40>;
+	     interrupts = <40>;
+	     interrupt-parent = <&PIC>;
+     };
+
+
+   j) Marvell Discovery Watch Dog Timer nodes
+
+   Represent the Discovery's watchdog timer hardware
+
+   Required properties:
+     - compatible : "marvell,mv64360-wdt"
+     - reg : Offset and length of the register set for this device
+
+   Example Discovery Watch Dog Timer node:
+     wdt@b410 {
+	     compatible = "marvell,mv64360-wdt";
+	     reg = <0xb410 0x8>;
+     };
+
+
+   k) Marvell Discovery I2C nodes
+
+   Represent the Discovery's I2C hardware
+
+   Required properties:
+     - device_type : "i2c"
+     - compatible : "marvell,mv64360-i2c"
+     - reg : Offset and length of the register set for this device
+     - interrupts : <a> where a is the interrupt number for the I2C.
+     - interrupt-parent : the phandle for the interrupt controller
+       that services interrupts for this device.
+
+   Example Discovery I2C node:
+	     compatible = "marvell,mv64360-i2c";
+	     reg = <0xc000 0x20>;
+	     virtual-reg = <0xf100c000>;
+	     interrupts = <37>;
+	     interrupt-parent = <&PIC>;
+     };
+
+
+   l) Marvell Discovery PIC (Programmable Interrupt Controller) nodes
+
+   Represent the Discovery's PIC hardware
+
+   Required properties:
+     - #interrupt-cells : <1>
+     - #address-cells : <0>
+     - compatible : "marvell,mv64360-pic"
+     - reg : Offset and length of the register set for this device
+     - interrupt-controller
+
+   Example Discovery PIC node:
+     pic {
+	     #interrupt-cells = <1>;
+	     #address-cells = <0>;
+	     compatible = "marvell,mv64360-pic";
+	     reg = <0x0 0x88>;
+	     interrupt-controller;
+     };
+
+
+   m) Marvell Discovery MPP (Multipurpose Pins) multiplexing nodes
+
+   Represent the Discovery's MPP hardware
+
+   Required properties:
+     - compatible : "marvell,mv64360-mpp"
+     - reg : Offset and length of the register set for this device
+
+   Example Discovery MPP node:
+     mpp@f000 {
+	     compatible = "marvell,mv64360-mpp";
+	     reg = <0xf000 0x10>;
+     };
+
+
+   n) Marvell Discovery GPP (General Purpose Pins) nodes
+
+   Represent the Discovery's GPP hardware
+
+   Required properties:
+     - compatible : "marvell,mv64360-gpp"
+     - reg : Offset and length of the register set for this device
+
+   Example Discovery GPP node:
+     gpp@f000 {
+	     compatible = "marvell,mv64360-gpp";
+	     reg = <0xf100 0x20>;
+     };
+
+
+   o) Marvell Discovery PCI host bridge node
+
+   Represents the Discovery's PCI host bridge device.  The properties
+   for this node conform to Rev 2.1 of the PCI Bus Binding to IEEE
+   1275-1994.  A typical value for the compatible property is
+   "marvell,mv64360-pci".
+
+   Example Discovery PCI host bridge node
+     pci@80000000 {
+	     #address-cells = <3>;
+	     #size-cells = <2>;
+	     #interrupt-cells = <1>;
+	     device_type = "pci";
+	     compatible = "marvell,mv64360-pci";
+	     reg = <0xcf8 0x8>;
+	     ranges = <0x01000000 0x0        0x0
+			     0x88000000 0x0 0x01000000
+		       0x02000000 0x0 0x80000000
+			     0x80000000 0x0 0x08000000>;
+	     bus-range = <0 255>;
+	     clock-frequency = <66000000>;
+	     interrupt-parent = <&PIC>;
+	     interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+	     interrupt-map = <
+		     /* IDSEL 0x0a */
+		     0x5000 0 0 1 &PIC 80
+		     0x5000 0 0 2 &PIC 81
+		     0x5000 0 0 3 &PIC 91
+		     0x5000 0 0 4 &PIC 93
+
+		     /* IDSEL 0x0b */
+		     0x5800 0 0 1 &PIC 91
+		     0x5800 0 0 2 &PIC 93
+		     0x5800 0 0 3 &PIC 80
+		     0x5800 0 0 4 &PIC 81
+
+		     /* IDSEL 0x0c */
+		     0x6000 0 0 1 &PIC 91
+		     0x6000 0 0 2 &PIC 93
+		     0x6000 0 0 3 &PIC 80
+		     0x6000 0 0 4 &PIC 81
+
+		     /* IDSEL 0x0d */
+		     0x6800 0 0 1 &PIC 93
+		     0x6800 0 0 2 &PIC 80
+		     0x6800 0 0 3 &PIC 81
+		     0x6800 0 0 4 &PIC 91
+	     >;
+     };
+
+
+   p) Marvell Discovery CPU Error nodes
+
+   Represent the Discovery's CPU error handler device.
+
+   Required properties:
+     - compatible : "marvell,mv64360-cpu-error"
+     - reg : Offset and length of the register set for this device
+     - interrupts : the interrupt number for this device
+     - interrupt-parent : the phandle for the interrupt controller
+       that services interrupts for this device.
+
+   Example Discovery CPU Error node:
+     cpu-error@0070 {
+	     compatible = "marvell,mv64360-cpu-error";
+	     reg = <0x70 0x10 0x128 0x28>;
+	     interrupts = <3>;
+	     interrupt-parent = <&PIC>;
+     };
+
+
+   q) Marvell Discovery SRAM Controller nodes
+
+   Represent the Discovery's SRAM controller device.
+
+   Required properties:
+     - compatible : "marvell,mv64360-sram-ctrl"
+     - reg : Offset and length of the register set for this device
+     - interrupts : the interrupt number for this device
+     - interrupt-parent : the phandle for the interrupt controller
+       that services interrupts for this device.
+
+   Example Discovery SRAM Controller node:
+     sram-ctrl@0380 {
+	     compatible = "marvell,mv64360-sram-ctrl";
+	     reg = <0x380 0x80>;
+	     interrupts = <13>;
+	     interrupt-parent = <&PIC>;
+     };
+
+
+   r) Marvell Discovery PCI Error Handler nodes
+
+   Represent the Discovery's PCI error handler device.
+
+   Required properties:
+     - compatible : "marvell,mv64360-pci-error"
+     - reg : Offset and length of the register set for this device
+     - interrupts : the interrupt number for this device
+     - interrupt-parent : the phandle for the interrupt controller
+       that services interrupts for this device.
+
+   Example Discovery PCI Error Handler node:
+     pci-error@1d40 {
+	     compatible = "marvell,mv64360-pci-error";
+	     reg = <0x1d40 0x40 0xc28 0x4>;
+	     interrupts = <12>;
+	     interrupt-parent = <&PIC>;
+     };
+
+
+   s) Marvell Discovery Memory Controller nodes
+
+   Represent the Discovery's memory controller device.
+
+   Required properties:
+     - compatible : "marvell,mv64360-mem-ctrl"
+     - reg : Offset and length of the register set for this device
+     - interrupts : the interrupt number for this device
+     - interrupt-parent : the phandle for the interrupt controller
+       that services interrupts for this device.
+
+   Example Discovery Memory Controller node:
+     mem-ctrl@1400 {
+	     compatible = "marvell,mv64360-mem-ctrl";
+	     reg = <0x1400 0x60>;
+	     interrupts = <17>;
+	     interrupt-parent = <&PIC>;
+     };
+
+

Documentation/powerpc/dts-bindings/phy.txt

@@ -0,0 +1,25 @@
+PHY nodes
+
+Required properties:
+
+ - device_type : Should be "ethernet-phy"
+ - interrupts : <a b> where a is the interrupt number and b is a
+   field that represents an encoding of the sense and level
+   information for the interrupt.  This should be encoded based on
+   the information in section 2) depending on the type of interrupt
+   controller you have.
+ - interrupt-parent : the phandle for the interrupt controller that
+   services interrupts for this device.
+ - reg : The ID number for the phy, usually a small integer
+ - linux,phandle :  phandle for this node; likely referenced by an
+   ethernet controller node.
+
+Example:
+
+ethernet-phy@0 {
+	linux,phandle = <2452000>
+	interrupt-parent = <40000>;
+	interrupts = <35 1>;
+	reg = <0>;
+	device_type = "ethernet-phy";
+};

Documentation/powerpc/dts-bindings/spi-bus.txt

@@ -0,0 +1,57 @@
+SPI (Serial Peripheral Interface) busses
+
+SPI busses can be described with a node for the SPI master device
+and a set of child nodes for each SPI slave on the bus.  For this
+discussion, it is assumed that the system's SPI controller is in
+SPI master mode.  This binding does not describe SPI controllers
+in slave mode.
+
+The SPI master node requires the following properties:
+- #address-cells  - number of cells required to define a chip select
+    		address on the SPI bus.
+- #size-cells     - should be zero.
+- compatible      - name of SPI bus controller following generic names
+    		recommended practice.
+No other properties are required in the SPI bus node.  It is assumed
+that a driver for an SPI bus device will understand that it is an SPI bus.
+However, the binding does not attempt to define the specific method for
+assigning chip select numbers.  Since SPI chip select configuration is
+flexible and non-standardized, it is left out of this binding with the
+assumption that board specific platform code will be used to manage
+chip selects.  Individual drivers can define additional properties to
+support describing the chip select layout.
+
+SPI slave nodes must be children of the SPI master node and can
+contain the following properties.
+- reg             - (required) chip select address of device.
+- compatible      - (required) name of SPI device following generic names
+    		recommended practice
+- spi-max-frequency - (required) Maximum SPI clocking speed of device in Hz
+- spi-cpol        - (optional) Empty property indicating device requires
+    		inverse clock polarity (CPOL) mode
+- spi-cpha        - (optional) Empty property indicating device requires
+    		shifted clock phase (CPHA) mode
+- spi-cs-high     - (optional) Empty property indicating device requires
+    		chip select active high
+
+SPI example for an MPC5200 SPI bus:
+	spi@f00 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
+		reg = <0xf00 0x20>;
+		interrupts = <2 13 0 2 14 0>;
+		interrupt-parent = <&mpc5200_pic>;
+
+		ethernet-switch@0 {
+			compatible = "micrel,ks8995m";
+			spi-max-frequency = <1000000>;
+			reg = <0>;
+		};
+
+		codec@1 {
+			compatible = "ti,tlv320aic26";
+			spi-max-frequency = <100000>;
+			reg = <1>;
+		};
+	};

Documentation/powerpc/dts-bindings/usb-ehci.txt

@@ -0,0 +1,25 @@
+USB EHCI controllers
+
+Required properties:
+  - compatible : should be "usb-ehci".
+  - reg : should contain at least address and length of the standard EHCI
+    register set for the device. Optional platform-dependent registers
+    (debug-port or other) can be also specified here, but only after
+    definition of standard EHCI registers.
+  - interrupts : one EHCI interrupt should be described here.
+If device registers are implemented in big endian mode, the device
+node should have "big-endian-regs" property.
+If controller implementation operates with big endian descriptors,
+"big-endian-desc" property should be specified.
+If both big endian registers and descriptors are used by the controller
+implementation, "big-endian" property can be specified instead of having
+both "big-endian-regs" and "big-endian-desc".
+
+Example (Sequoia 440EPx):
+    ehci@e0000300 {
+	   compatible = "ibm,usb-ehci-440epx", "usb-ehci";
+	   interrupt-parent = <&UIC0>;
+	   interrupts = <1a 4>;
+	   reg = <0 e0000300 90 0 e0000390 70>;
+	   big-endian;
+   };

Documentation/powerpc/dts-bindings/xilinx.txt

@@ -0,0 +1,295 @@
+   d) Xilinx IP cores
+
+   The Xilinx EDK toolchain ships with a set of IP cores (devices) for use
+   in Xilinx Spartan and Virtex FPGAs.  The devices cover the whole range
+   of standard device types (network, serial, etc.) and miscellaneous
+   devices (gpio, LCD, spi, etc).  Also, since these devices are
+   implemented within the fpga fabric every instance of the device can be
+   synthesised with different options that change the behaviour.
+
+   Each IP-core has a set of parameters which the FPGA designer can use to
+   control how the core is synthesized.  Historically, the EDK tool would
+   extract the device parameters relevant to device drivers and copy them
+   into an 'xparameters.h' in the form of #define symbols.  This tells the
+   device drivers how the IP cores are configured, but it requres the kernel
+   to be recompiled every time the FPGA bitstream is resynthesized.
+
+   The new approach is to export the parameters into the device tree and
+   generate a new device tree each time the FPGA bitstream changes.  The
+   parameters which used to be exported as #defines will now become
+   properties of the device node.  In general, device nodes for IP-cores
+   will take the following form:
+
+	(name): (generic-name)@(base-address) {
+		compatible = "xlnx,(ip-core-name)-(HW_VER)"
+			     [, (list of compatible devices), ...];
+		reg = <(baseaddr) (size)>;
+		interrupt-parent = <&interrupt-controller-phandle>;
+		interrupts = < ... >;
+		xlnx,(parameter1) = "(string-value)";
+		xlnx,(parameter2) = <(int-value)>;
+	};
+
+	(generic-name):   an open firmware-style name that describes the
+			generic class of device.  Preferably, this is one word, such
+			as 'serial' or 'ethernet'.
+	(ip-core-name):	the name of the ip block (given after the BEGIN
+			directive in system.mhs).  Should be in lowercase
+			and all underscores '_' converted to dashes '-'.
+	(name):		is derived from the "PARAMETER INSTANCE" value.
+	(parameter#):	C_* parameters from system.mhs.  The C_ prefix is
+			dropped from the parameter name, the name is converted
+			to lowercase and all underscore '_' characters are
+			converted to dashes '-'.
+	(baseaddr):	the baseaddr parameter value (often named C_BASEADDR).
+	(HW_VER):	from the HW_VER parameter.
+	(size):		the address range size (often C_HIGHADDR - C_BASEADDR + 1).
+
+   Typically, the compatible list will include the exact IP core version
+   followed by an older IP core version which implements the same
+   interface or any other device with the same interface.
+
+   'reg', 'interrupt-parent' and 'interrupts' are all optional properties.
+
+   For example, the following block from system.mhs:
+
+	BEGIN opb_uartlite
+		PARAMETER INSTANCE = opb_uartlite_0
+		PARAMETER HW_VER = 1.00.b
+		PARAMETER C_BAUDRATE = 115200
+		PARAMETER C_DATA_BITS = 8
+		PARAMETER C_ODD_PARITY = 0
+		PARAMETER C_USE_PARITY = 0
+		PARAMETER C_CLK_FREQ = 50000000
+		PARAMETER C_BASEADDR = 0xEC100000
+		PARAMETER C_HIGHADDR = 0xEC10FFFF
+		BUS_INTERFACE SOPB = opb_7
+		PORT OPB_Clk = CLK_50MHz
+		PORT Interrupt = opb_uartlite_0_Interrupt
+		PORT RX = opb_uartlite_0_RX
+		PORT TX = opb_uartlite_0_TX
+		PORT OPB_Rst = sys_bus_reset_0
+	END
+
+   becomes the following device tree node:
+
+	opb_uartlite_0: serial@ec100000 {
+		device_type = "serial";
+		compatible = "xlnx,opb-uartlite-1.00.b";
+		reg = <ec100000 10000>;
+		interrupt-parent = <&opb_intc_0>;
+		interrupts = <1 0>; // got this from the opb_intc parameters
+		current-speed = <d#115200>;	// standard serial device prop
+		clock-frequency = <d#50000000>;	// standard serial device prop
+		xlnx,data-bits = <8>;
+		xlnx,odd-parity = <0>;
+		xlnx,use-parity = <0>;
+	};
+
+   Some IP cores actually implement 2 or more logical devices.  In
+   this case, the device should still describe the whole IP core with
+   a single node and add a child node for each logical device.  The
+   ranges property can be used to translate from parent IP-core to the
+   registers of each device.  In addition, the parent node should be
+   compatible with the bus type 'xlnx,compound', and should contain
+   #address-cells and #size-cells, as with any other bus.  (Note: this
+   makes the assumption that both logical devices have the same bus
+   binding.  If this is not true, then separate nodes should be used
+   for each logical device).  The 'cell-index' property can be used to
+   enumerate logical devices within an IP core.  For example, the
+   following is the system.mhs entry for the dual ps2 controller found
+   on the ml403 reference design.
+
+	BEGIN opb_ps2_dual_ref
+		PARAMETER INSTANCE = opb_ps2_dual_ref_0
+		PARAMETER HW_VER = 1.00.a
+		PARAMETER C_BASEADDR = 0xA9000000
+		PARAMETER C_HIGHADDR = 0xA9001FFF
+		BUS_INTERFACE SOPB = opb_v20_0
+		PORT Sys_Intr1 = ps2_1_intr
+		PORT Sys_Intr2 = ps2_2_intr
+		PORT Clkin1 = ps2_clk_rx_1
+		PORT Clkin2 = ps2_clk_rx_2
+		PORT Clkpd1 = ps2_clk_tx_1
+		PORT Clkpd2 = ps2_clk_tx_2
+		PORT Rx1 = ps2_d_rx_1
+		PORT Rx2 = ps2_d_rx_2
+		PORT Txpd1 = ps2_d_tx_1
+		PORT Txpd2 = ps2_d_tx_2
+	END
+
+   It would result in the following device tree nodes:
+
+	opb_ps2_dual_ref_0: opb-ps2-dual-ref@a9000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "xlnx,compound";
+		ranges = <0 a9000000 2000>;
+		// If this device had extra parameters, then they would
+		// go here.
+		ps2@0 {
+			compatible = "xlnx,opb-ps2-dual-ref-1.00.a";
+			reg = <0 40>;
+			interrupt-parent = <&opb_intc_0>;
+			interrupts = <3 0>;
+			cell-index = <0>;
+		};
+		ps2@1000 {
+			compatible = "xlnx,opb-ps2-dual-ref-1.00.a";
+			reg = <1000 40>;
+			interrupt-parent = <&opb_intc_0>;
+			interrupts = <3 0>;
+			cell-index = <0>;
+		};
+	};
+
+   Also, the system.mhs file defines bus attachments from the processor
+   to the devices.  The device tree structure should reflect the bus
+   attachments.  Again an example; this system.mhs fragment:
+
+	BEGIN ppc405_virtex4
+		PARAMETER INSTANCE = ppc405_0
+		PARAMETER HW_VER = 1.01.a
+		BUS_INTERFACE DPLB = plb_v34_0
+		BUS_INTERFACE IPLB = plb_v34_0
+	END
+
+	BEGIN opb_intc
+		PARAMETER INSTANCE = opb_intc_0
+		PARAMETER HW_VER = 1.00.c
+		PARAMETER C_BASEADDR = 0xD1000FC0
+		PARAMETER C_HIGHADDR = 0xD1000FDF
+		BUS_INTERFACE SOPB = opb_v20_0
+	END
+
+	BEGIN opb_uart16550
+		PARAMETER INSTANCE = opb_uart16550_0
+		PARAMETER HW_VER = 1.00.d
+		PARAMETER C_BASEADDR = 0xa0000000
+		PARAMETER C_HIGHADDR = 0xa0001FFF
+		BUS_INTERFACE SOPB = opb_v20_0
+	END
+
+	BEGIN plb_v34
+		PARAMETER INSTANCE = plb_v34_0
+		PARAMETER HW_VER = 1.02.a
+	END
+
+	BEGIN plb_bram_if_cntlr
+		PARAMETER INSTANCE = plb_bram_if_cntlr_0
+		PARAMETER HW_VER = 1.00.b
+		PARAMETER C_BASEADDR = 0xFFFF0000
+		PARAMETER C_HIGHADDR = 0xFFFFFFFF
+		BUS_INTERFACE SPLB = plb_v34_0
+	END
+
+	BEGIN plb2opb_bridge
+		PARAMETER INSTANCE = plb2opb_bridge_0
+		PARAMETER HW_VER = 1.01.a
+		PARAMETER C_RNG0_BASEADDR = 0x20000000
+		PARAMETER C_RNG0_HIGHADDR = 0x3FFFFFFF
+		PARAMETER C_RNG1_BASEADDR = 0x60000000
+		PARAMETER C_RNG1_HIGHADDR = 0x7FFFFFFF
+		PARAMETER C_RNG2_BASEADDR = 0x80000000
+		PARAMETER C_RNG2_HIGHADDR = 0xBFFFFFFF
+		PARAMETER C_RNG3_BASEADDR = 0xC0000000
+		PARAMETER C_RNG3_HIGHADDR = 0xDFFFFFFF
+		BUS_INTERFACE SPLB = plb_v34_0
+		BUS_INTERFACE MOPB = opb_v20_0
+	END
+
+   Gives this device tree (some properties removed for clarity):
+
+	plb@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "xlnx,plb-v34-1.02.a";
+		device_type = "ibm,plb";
+		ranges; // 1:1 translation
+
+		plb_bram_if_cntrl_0: bram@ffff0000 {
+			reg = <ffff0000 10000>;
+		}
+
+		opb@20000000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <20000000 20000000 20000000
+				  60000000 60000000 20000000
+				  80000000 80000000 40000000
+				  c0000000 c0000000 20000000>;
+
+			opb_uart16550_0: serial@a0000000 {
+				reg = <a00000000 2000>;
+			};
+
+			opb_intc_0: interrupt-controller@d1000fc0 {
+				reg = <d1000fc0 20>;
+			};
+		};
+	};
+
+   That covers the general approach to binding xilinx IP cores into the
+   device tree.  The following are bindings for specific devices:
+
+      i) Xilinx ML300 Framebuffer
+
+      Simple framebuffer device from the ML300 reference design (also on the
+      ML403 reference design as well as others).
+
+      Optional properties:
+       - resolution = <xres yres> : pixel resolution of framebuffer.  Some
+                                    implementations use a different resolution.
+                                    Default is <d#640 d#480>
+       - virt-resolution = <xvirt yvirt> : Size of framebuffer in memory.
+                                           Default is <d#1024 d#480>.
+       - rotate-display (empty) : rotate display 180 degrees.
+
+      ii) Xilinx SystemACE
+
+      The Xilinx SystemACE device is used to program FPGAs from an FPGA
+      bitstream stored on a CF card.  It can also be used as a generic CF
+      interface device.
+
+      Optional properties:
+       - 8-bit (empty) : Set this property for SystemACE in 8 bit mode
+
+      iii) Xilinx EMAC and Xilinx TEMAC
+
+      Xilinx Ethernet devices.  In addition to general xilinx properties
+      listed above, nodes for these devices should include a phy-handle
+      property, and may include other common network device properties
+      like local-mac-address.
+
+      iv) Xilinx Uartlite
+
+      Xilinx uartlite devices are simple fixed speed serial ports.
+
+      Required properties:
+       - current-speed : Baud rate of uartlite
+
+      v) Xilinx hwicap
+
+		Xilinx hwicap devices provide access to the configuration logic
+		of the FPGA through the Internal Configuration Access Port
+		(ICAP).  The ICAP enables partial reconfiguration of the FPGA,
+		readback of the configuration information, and some control over
+		'warm boots' of the FPGA fabric.
+
+		Required properties:
+		- xlnx,family : The family of the FPGA, necessary since the
+                      capabilities of the underlying ICAP hardware
+                      differ between different families.  May be
+                      'virtex2p', 'virtex4', or 'virtex5'.
+
+      vi) Xilinx Uart 16550
+
+      Xilinx UART 16550 devices are very similar to the NS16550 but with
+      different register spacing and an offset from the base address.
+
+      Required properties:
+       - clock-frequency : Frequency of the clock input
+       - reg-offset : A value of 3 is required
+       - reg-shift : A value of 2 is required
+
+

Documentation/scheduler/sched-rt-group.txt

@@ -73,7 +73,7 @@ The remaining CPU time will be used for user input and other tasks. Because
 realtime tasks have explicitly allocated the CPU time they need to perform
 their tasks, buffer underruns in the graphics or audio can be eliminated.
 
-NOTE: the above example is not fully implemented as of yet (2.6.25). We still
+NOTE: the above example is not fully implemented yet. We still
 lack an EDF scheduler to make non-uniform periods usable.
 
 
@@ -140,14 +140,15 @@ The other option is:
 
 .o CONFIG_CGROUP_SCHED (aka "Basis for grouping tasks" = "Control groups")
 
-This uses the /cgroup virtual file system and "/cgroup/<cgroup>/cpu.rt_runtime_us"
-to control the CPU time reserved for each control group instead.
+This uses the /cgroup virtual file system and
+"/cgroup/<cgroup>/cpu.rt_runtime_us" to control the CPU time reserved for each
+control group instead.
 
 For more information on working with control groups, you should read
 Documentation/cgroups/cgroups.txt as well.
 
-Group settings are checked against the following limits in order to keep the configuration
-schedulable:
+Group settings are checked against the following limits in order to keep the
+configuration schedulable:
 
    \Sum_{i} runtime_{i} / global_period <= global_runtime / global_period
 
@@ -189,7 +190,7 @@ Implementing SCHED_EDF might take a while to complete. Priority Inheritance is
 the biggest challenge as the current linux PI infrastructure is geared towards
 the limited static priority levels 0-99. With deadline scheduling you need to
 do deadline inheritance (since priority is inversely proportional to the
-deadline delta (deadline - now).
+deadline delta (deadline - now)).
 
 This means the whole PI machinery will have to be reworked - and that is one of
 the most complex pieces of code we have.

Documentation/sound/alsa/HD-Audio-Models.txt

@@ -240,6 +240,7 @@ AD1986A
   laptop-automute 2-channel with EAPD and HP-automute (Lenovo N100)
   ultra		2-channel with EAPD (Samsung Ultra tablet PC)
   samsung	2-channel with EAPD (Samsung R65)
+  samsung-p50	2-channel with HP-automute (Samsung P50)
 
 AD1988/AD1988B/AD1989A/AD1989B
 ==============================

Documentation/sound/alsa/Procfile.txt

@@ -101,6 +101,8 @@ card*/pcm*/xrun_debug
 	  bit 0 = Enable XRUN/jiffies debug messages
 	  bit 1 = Show stack trace at XRUN / jiffies check
 	  bit 2 = Enable additional jiffies check
+	  bit 3 = Log hwptr update at each period interrupt
+	  bit 4 = Log hwptr update at each snd_pcm_update_hw_ptr()
 
 	When the bit 0 is set, the driver will show the messages to
 	kernel log when an xrun is detected.  The debug message is
@@ -117,6 +119,9 @@ card*/pcm*/xrun_debug
 	buggy) hardware that doesn't give smooth pointer updates.
 	This feature is enabled via the bit 2.
 
+	Bits 3 and 4 are for logging the hwptr records.  Note that
+	these will give flood of kernel messages.
+
 card*/pcm*/sub*/info
 	The general information of this PCM sub-stream.
 

Documentation/spi/spidev_test.c

@@ -99,11 +99,13 @@ void parse_opts(int argc, char *argv[])
 			{ "lsb",     0, 0, 'L' },
 			{ "cs-high", 0, 0, 'C' },
 			{ "3wire",   0, 0, '3' },
+			{ "no-cs",   0, 0, 'N' },
+			{ "ready",   0, 0, 'R' },
 			{ NULL, 0, 0, 0 },
 		};
 		int c;
 
-		c = getopt_long(argc, argv, "D:s:d:b:lHOLC3", lopts, NULL);
+		c = getopt_long(argc, argv, "D:s:d:b:lHOLC3NR", lopts, NULL);
 
 		if (c == -1)
 			break;
@@ -139,6 +141,12 @@ void parse_opts(int argc, char *argv[])
 		case '3':
 			mode |= SPI_3WIRE;
 			break;
+		case 'N':
+			mode |= SPI_NO_CS;
+			break;
+		case 'R':
+			mode |= SPI_READY;
+			break;
 		default:
 			print_usage(argv[0]);
 			break;

Documentation/sysrq.txt

@@ -66,7 +66,8 @@ On all -  write a character to /proc/sysrq-trigger.  e.g.:
 'b'     - Will immediately reboot the system without syncing or unmounting
           your disks.
 
-'c'	- Will perform a kexec reboot in order to take a crashdump.
+'c'	- Will perform a system crash by a NULL pointer dereference.
+          A crashdump will be taken if configured.
 
 'd'	- Shows all locks that are held.
 
@@ -141,8 +142,8 @@ useful when you want to exit a program that will not let you switch consoles.
 re'B'oot is good when you're unable to shut down. But you should also 'S'ync
 and 'U'mount first.
 
-'C'rashdump can be used to manually trigger a crashdump when the system is hung.
-The kernel needs to have been built with CONFIG_KEXEC enabled.
+'C'rash can be used to manually trigger a crashdump when the system is hung.
+Note that this just triggers a crash if there is no dump mechanism available.
 
 'S'ync is great when your system is locked up, it allows you to sync your
 disks and will certainly lessen the chance of data loss and fscking. Note

Documentation/video4linux/CARDLIST.em28xx

@@ -20,7 +20,7 @@
  19 -> EM2860/SAA711X Reference Design          (em2860)
  20 -> AMD ATI TV Wonder HD 600                 (em2880)        [0438:b002]
  21 -> eMPIA Technology, Inc. GrabBeeX+ Video Encoder (em2800)        [eb1a:2801]
- 22 -> Unknown EM2750/EM2751 webcam grabber     (em2750)        [eb1a:2750,eb1a:2751]
+ 22 -> EM2710/EM2750/EM2751 webcam grabber      (em2750)        [eb1a:2750,eb1a:2751]
  23 -> Huaqi DLCW-130                           (em2750)
  24 -> D-Link DUB-T210 TV Tuner                 (em2820/em2840) [2001:f112]
  25 -> Gadmei UTV310                            (em2820/em2840)
@@ -66,3 +66,4 @@
  68 -> Terratec AV350                           (em2860)        [0ccd:0084]
  69 -> KWorld ATSC 315U HDTV TV Box             (em2882)        [eb1a:a313]
  70 -> Evga inDtube                             (em2882)
+ 71 -> Silvercrest Webcam 1.3mpix               (em2820/em2840)

Documentation/video4linux/gspca.txt

@@ -44,7 +44,9 @@ zc3xx		0458:7007	Genius VideoCam V2
 zc3xx		0458:700c	Genius VideoCam V3
 zc3xx		0458:700f	Genius VideoCam Web V2
 sonixj		0458:7025	Genius Eye 311Q
+sn9c20x		0458:7029	Genius Look 320s
 sonixj		0458:702e	Genius Slim 310 NB
+sn9c20x		045e:00f4	LifeCam VX-6000 (SN9C20x + OV9650)
 sonixj		045e:00f5	MicroSoft VX3000
 sonixj		045e:00f7	MicroSoft VX1000
 ov519		045e:028c	Micro$oft xbox cam
@@ -282,6 +284,28 @@ sonixj		0c45:613a	Microdia Sonix PC Camera
 sonixj		0c45:613b	Surfer SN-206
 sonixj		0c45:613c	Sonix Pccam168
 sonixj		0c45:6143	Sonix Pccam168
+sn9c20x		0c45:6240	PC Camera (SN9C201 + MT9M001)
+sn9c20x		0c45:6242	PC Camera (SN9C201 + MT9M111)
+sn9c20x		0c45:6248	PC Camera (SN9C201 + OV9655)
+sn9c20x		0c45:624e	PC Camera (SN9C201 + SOI968)
+sn9c20x		0c45:624f	PC Camera (SN9C201 + OV9650)
+sn9c20x		0c45:6251	PC Camera (SN9C201 + OV9650)
+sn9c20x		0c45:6253	PC Camera (SN9C201 + OV9650)
+sn9c20x		0c45:6260	PC Camera (SN9C201 + OV7670)
+sn9c20x		0c45:6270	PC Camera (SN9C201 + MT9V011/MT9V111/MT9V112)
+sn9c20x		0c45:627b	PC Camera (SN9C201 + OV7660)
+sn9c20x		0c45:627c	PC Camera (SN9C201 + HV7131R)
+sn9c20x		0c45:627f	PC Camera (SN9C201 + OV9650)
+sn9c20x		0c45:6280	PC Camera (SN9C202 + MT9M001)
+sn9c20x		0c45:6282	PC Camera (SN9C202 + MT9M111)
+sn9c20x		0c45:6288	PC Camera (SN9C202 + OV9655)
+sn9c20x		0c45:628e	PC Camera (SN9C202 + SOI968)
+sn9c20x		0c45:628f	PC Camera (SN9C202 + OV9650)
+sn9c20x		0c45:62a0	PC Camera (SN9C202 + OV7670)
+sn9c20x		0c45:62b0	PC Camera (SN9C202 + MT9V011/MT9V111/MT9V112)
+sn9c20x		0c45:62b3	PC Camera (SN9C202 + OV9655)
+sn9c20x		0c45:62bb	PC Camera (SN9C202 + OV7660)
+sn9c20x		0c45:62bc	PC Camera (SN9C202 + HV7131R)
 sunplus		0d64:0303	Sunplus FashionCam DXG
 etoms		102c:6151	Qcam Sangha CIF
 etoms		102c:6251	Qcam xxxxxx VGA
@@ -290,6 +314,7 @@ spca561		10fd:7e50	FlyCam Usb 100
 zc3xx		10fd:8050	Typhoon Webshot II USB 300k
 ov534		1415:2000	Sony HD Eye for PS3 (SLEH 00201)
 pac207		145f:013a	Trust WB-1300N
+sn9c20x		145f:013d	Trust WB-3600R
 vc032x		15b8:6001	HP 2.0 Megapixel
 vc032x		15b8:6002	HP 2.0 Megapixel rz406aa
 spca501		1776:501c	Arowana 300K CMOS Camera
@@ -300,4 +325,11 @@ spca500		2899:012c	Toptro Industrial
 spca508		8086:0110	Intel Easy PC Camera
 spca500		8086:0630	Intel Pocket PC Camera
 spca506		99fa:8988	Grandtec V.cap
+sn9c20x		a168:0610	Dino-Lite Digital Microscope (SN9C201 + HV7131R)
+sn9c20x		a168:0611	Dino-Lite Digital Microscope (SN9C201 + HV7131R)
+sn9c20x		a168:0613	Dino-Lite Digital Microscope (SN9C201 + HV7131R)
+sn9c20x		a168:0618	Dino-Lite Digital Microscope (SN9C201 + HV7131R)
+sn9c20x		a168:0614	Dino-Lite Digital Microscope (SN9C201 + MT9M111)
+sn9c20x		a168:0615	Dino-Lite Digital Microscope (SN9C201 + MT9M111)
+sn9c20x		a168:0617	Dino-Lite Digital Microscope (SN9C201 + MT9M111)
 spca561		abcd:cdee	Petcam

Documentation/x86/00-INDEX

@@ -2,3 +2,5 @@
 	- this file
 mtrr.txt
 	- how to use x86 Memory Type Range Registers to increase performance
+exception-tables.txt
+	- why and how Linux kernel uses exception tables on x86

Documentation/exception.txt → Documentation/x86/exception-tables.txt

@@ -1,123 +1,123 @@
-     Kernel level exception handling in Linux 2.1.8
+     Kernel level exception handling in Linux
   Commentary by Joerg Pommnitz <joerg@raleigh.ibm.com>
 
-When a process runs in kernel mode, it often has to access user 
-mode memory whose address has been passed by an untrusted program. 
+When a process runs in kernel mode, it often has to access user
+mode memory whose address has been passed by an untrusted program.
 To protect itself the kernel has to verify this address.
 
-In older versions of Linux this was done with the 
-int verify_area(int type, const void * addr, unsigned long size) 
+In older versions of Linux this was done with the
+int verify_area(int type, const void * addr, unsigned long size)
 function (which has since been replaced by access_ok()).
 
-This function verified that the memory area starting at address 
+This function verified that the memory area starting at address
 'addr' and of size 'size' was accessible for the operation specified
-in type (read or write). To do this, verify_read had to look up the 
-virtual memory area (vma) that contained the address addr. In the 
-normal case (correctly working program), this test was successful. 
+in type (read or write). To do this, verify_read had to look up the
+virtual memory area (vma) that contained the address addr. In the
+normal case (correctly working program), this test was successful.
 It only failed for a few buggy programs. In some kernel profiling
 tests, this normally unneeded verification used up a considerable
 amount of time.
 
-To overcome this situation, Linus decided to let the virtual memory 
+To overcome this situation, Linus decided to let the virtual memory
 hardware present in every Linux-capable CPU handle this test.
 
 How does this work?
 
-Whenever the kernel tries to access an address that is currently not 
-accessible, the CPU generates a page fault exception and calls the 
-page fault handler 
+Whenever the kernel tries to access an address that is currently not
+accessible, the CPU generates a page fault exception and calls the
+page fault handler
 
 void do_page_fault(struct pt_regs *regs, unsigned long error_code)
 
-in arch/i386/mm/fault.c. The parameters on the stack are set up by 
-the low level assembly glue in arch/i386/kernel/entry.S. The parameter
-regs is a pointer to the saved registers on the stack, error_code 
+in arch/x86/mm/fault.c. The parameters on the stack are set up by
+the low level assembly glue in arch/x86/kernel/entry_32.S. The parameter
+regs is a pointer to the saved registers on the stack, error_code
 contains a reason code for the exception.
 
-do_page_fault first obtains the unaccessible address from the CPU 
-control register CR2. If the address is within the virtual address 
-space of the process, the fault probably occurred, because the page 
-was not swapped in, write protected or something similar. However, 
-we are interested in the other case: the address is not valid, there 
-is no vma that contains this address. In this case, the kernel jumps 
-to the bad_area label. 
-
-There it uses the address of the instruction that caused the exception 
-(i.e. regs->eip) to find an address where the execution can continue 
-(fixup). If this search is successful, the fault handler modifies the 
-return address (again regs->eip) and returns. The execution will 
+do_page_fault first obtains the unaccessible address from the CPU
+control register CR2. If the address is within the virtual address
+space of the process, the fault probably occurred, because the page
+was not swapped in, write protected or something similar. However,
+we are interested in the other case: the address is not valid, there
+is no vma that contains this address. In this case, the kernel jumps
+to the bad_area label.
+
+There it uses the address of the instruction that caused the exception
+(i.e. regs->eip) to find an address where the execution can continue
+(fixup). If this search is successful, the fault handler modifies the
+return address (again regs->eip) and returns. The execution will
 continue at the address in fixup.
 
 Where does fixup point to?
 
-Since we jump to the contents of fixup, fixup obviously points 
-to executable code. This code is hidden inside the user access macros. 
-I have picked the get_user macro defined in include/asm/uaccess.h as an
-example. The definition is somewhat hard to follow, so let's peek at 
+Since we jump to the contents of fixup, fixup obviously points
+to executable code. This code is hidden inside the user access macros.
+I have picked the get_user macro defined in arch/x86/include/asm/uaccess.h
+as an example. The definition is somewhat hard to follow, so let's peek at
 the code generated by the preprocessor and the compiler. I selected
-the get_user call in drivers/char/console.c for a detailed examination.
+the get_user call in drivers/char/sysrq.c for a detailed examination.
 
-The original code in console.c line 1405:
+The original code in sysrq.c line 587:
         get_user(c, buf);
 
 The preprocessor output (edited to become somewhat readable):
 
 (
-  {        
-    long __gu_err = - 14 , __gu_val = 0;        
-    const __typeof__(*( (  buf ) )) *__gu_addr = ((buf));        
-    if (((((0 + current_set[0])->tss.segment) == 0x18 )  || 
-       (((sizeof(*(buf))) <= 0xC0000000UL) && 
-       ((unsigned long)(__gu_addr ) <= 0xC0000000UL - (sizeof(*(buf)))))))        
+  {
+    long __gu_err = - 14 , __gu_val = 0;
+    const __typeof__(*( (  buf ) )) *__gu_addr = ((buf));
+    if (((((0 + current_set[0])->tss.segment) == 0x18 )  ||
+       (((sizeof(*(buf))) <= 0xC0000000UL) &&
+       ((unsigned long)(__gu_addr ) <= 0xC0000000UL - (sizeof(*(buf)))))))
       do {
-        __gu_err  = 0;        
-        switch ((sizeof(*(buf)))) {        
-          case 1: 
-            __asm__ __volatile__(        
-              "1:      mov" "b" " %2,%" "b" "1\n"        
-              "2:\n"        
-              ".section .fixup,\"ax\"\n"        
-              "3:      movl %3,%0\n"        
-              "        xor" "b" " %" "b" "1,%" "b" "1\n"        
-              "        jmp 2b\n"        
-              ".section __ex_table,\"a\"\n"        
-              "        .align 4\n"        
-              "        .long 1b,3b\n"        
+        __gu_err  = 0;
+        switch ((sizeof(*(buf)))) {
+          case 1:
+            __asm__ __volatile__(
+              "1:      mov" "b" " %2,%" "b" "1\n"
+              "2:\n"
+              ".section .fixup,\"ax\"\n"
+              "3:      movl %3,%0\n"
+              "        xor" "b" " %" "b" "1,%" "b" "1\n"
+              "        jmp 2b\n"
+              ".section __ex_table,\"a\"\n"
+              "        .align 4\n"
+              "        .long 1b,3b\n"
               ".text"        : "=r"(__gu_err), "=q" (__gu_val): "m"((*(struct __large_struct *)
-                            (   __gu_addr   )) ), "i"(- 14 ), "0"(  __gu_err  )) ; 
-              break;        
-          case 2: 
+                            (   __gu_addr   )) ), "i"(- 14 ), "0"(  __gu_err  )) ;
+              break;
+          case 2:
             __asm__ __volatile__(
-              "1:      mov" "w" " %2,%" "w" "1\n"        
-              "2:\n"        
-              ".section .fixup,\"ax\"\n"        
-              "3:      movl %3,%0\n"        
-              "        xor" "w" " %" "w" "1,%" "w" "1\n"        
-              "        jmp 2b\n"        
-              ".section __ex_table,\"a\"\n"        
-              "        .align 4\n"        
-              "        .long 1b,3b\n"        
+              "1:      mov" "w" " %2,%" "w" "1\n"
+              "2:\n"
+              ".section .fixup,\"ax\"\n"
+              "3:      movl %3,%0\n"
+              "        xor" "w" " %" "w" "1,%" "w" "1\n"
+              "        jmp 2b\n"
+              ".section __ex_table,\"a\"\n"
+              "        .align 4\n"
+              "        .long 1b,3b\n"
               ".text"        : "=r"(__gu_err), "=r" (__gu_val) : "m"((*(struct __large_struct *)
-                            (   __gu_addr   )) ), "i"(- 14 ), "0"(  __gu_err  )); 
-              break;        
-          case 4: 
-            __asm__ __volatile__(        
-              "1:      mov" "l" " %2,%" "" "1\n"        
-              "2:\n"        
-              ".section .fixup,\"ax\"\n"        
-              "3:      movl %3,%0\n"        
-              "        xor" "l" " %" "" "1,%" "" "1\n"        
-              "        jmp 2b\n"        
-              ".section __ex_table,\"a\"\n"        
-              "        .align 4\n"        "        .long 1b,3b\n"        
+                            (   __gu_addr   )) ), "i"(- 14 ), "0"(  __gu_err  ));
+              break;
+          case 4:
+            __asm__ __volatile__(
+              "1:      mov" "l" " %2,%" "" "1\n"
+              "2:\n"
+              ".section .fixup,\"ax\"\n"
+              "3:      movl %3,%0\n"
+              "        xor" "l" " %" "" "1,%" "" "1\n"
+              "        jmp 2b\n"
+              ".section __ex_table,\"a\"\n"
+              "        .align 4\n"        "        .long 1b,3b\n"
               ".text"        : "=r"(__gu_err), "=r" (__gu_val) : "m"((*(struct __large_struct *)
-                            (   __gu_addr   )) ), "i"(- 14 ), "0"(__gu_err)); 
-              break;        
-          default: 
-            (__gu_val) = __get_user_bad();        
-        }        
-      } while (0) ;        
-    ((c)) = (__typeof__(*((buf))))__gu_val;        
+                            (   __gu_addr   )) ), "i"(- 14 ), "0"(__gu_err));
+              break;
+          default:
+            (__gu_val) = __get_user_bad();
+        }
+      } while (0) ;
+    ((c)) = (__typeof__(*((buf))))__gu_val;
     __gu_err;
   }
 );
@@ -127,12 +127,12 @@ see what code gcc generates:
 
  >         xorl %edx,%edx
  >         movl current_set,%eax
- >         cmpl $24,788(%eax)        
- >         je .L1424        
+ >         cmpl $24,788(%eax)
+ >         je .L1424
  >         cmpl $-1073741825,64(%esp)
- >         ja .L1423                
+ >         ja .L1423
  > .L1424:
- >         movl %edx,%eax                        
+ >         movl %edx,%eax
  >         movl 64(%esp),%ebx
  > #APP
  > 1:      movb (%ebx),%dl                /* this is the actual user access */
@@ -149,17 +149,17 @@ see what code gcc generates:
  > .L1423:
  >         movzbl %dl,%esi
 
-The optimizer does a good job and gives us something we can actually 
-understand. Can we? The actual user access is quite obvious. Thanks 
-to the unified address space we can just access the address in user 
+The optimizer does a good job and gives us something we can actually
+understand. Can we? The actual user access is quite obvious. Thanks
+to the unified address space we can just access the address in user
 memory. But what does the .section stuff do?????
 
 To understand this we have to look at the final kernel:
 
  > objdump --section-headers vmlinux
- > 
+ >
  > vmlinux:     file format elf32-i386
- > 
+ >
  > Sections:
  > Idx Name          Size      VMA       LMA       File off  Algn
  >   0 .text         00098f40  c0100000  c0100000  00001000  2**4
@@ -198,18 +198,18 @@ final kernel executable:
 
 The whole user memory access is reduced to 10 x86 machine instructions.
 The instructions bracketed in the .section directives are no longer
-in the normal execution path. They are located in a different section 
+in the normal execution path. They are located in a different section
 of the executable file:
 
  > objdump --disassemble --section=.fixup vmlinux
- > 
+ >
  > c0199ff5 <.fixup+10b5> movl   $0xfffffff2,%eax
  > c0199ffa <.fixup+10ba> xorb   %dl,%dl
  > c0199ffc <.fixup+10bc> jmp    c017e7a7 <do_con_write+e3>
 
 And finally:
  > objdump --full-contents --section=__ex_table vmlinux
- > 
+ >
  >  c01aa7c4 93c017c0 e09f19c0 97c017c0 99c017c0  ................
  >  c01aa7d4 f6c217c0 e99f19c0 a5e717c0 f59f19c0  ................
  >  c01aa7e4 080a18c0 01a019c0 0a0a18c0 04a019c0  ................
@@ -235,8 +235,8 @@ sections in the ELF object file. So the instructions
 ended up in the .fixup section of the object file and the addresses
         .long 1b,3b
 ended up in the __ex_table section of the object file. 1b and 3b
-are local labels. The local label 1b (1b stands for next label 1 
-backward) is the address of the instruction that might fault, i.e. 
+are local labels. The local label 1b (1b stands for next label 1
+backward) is the address of the instruction that might fault, i.e.
 in our case the address of the label 1 is c017e7a5:
 the original assembly code: > 1:      movb (%ebx),%dl
 and linked in vmlinux     : > c017e7a5 <do_con_write+e1> movb   (%ebx),%dl
@@ -254,7 +254,7 @@ The assembly code
 becomes the value pair
  >  c01aa7d4 c017c2f6 c0199fe9 c017e7a5 c0199ff5  ................
                                ^this is ^this is
-                               1b       3b 
+                               1b       3b
 c017e7a5,c0199ff5 in the exception table of the kernel.
 
 So, what actually happens if a fault from kernel mode with no suitable
@@ -266,9 +266,9 @@ vma occurs?
 3.) CPU calls do_page_fault
 4.) do page fault calls search_exception_table (regs->eip == c017e7a5);
 5.) search_exception_table looks up the address c017e7a5 in the
-    exception table (i.e. the contents of the ELF section __ex_table) 
+    exception table (i.e. the contents of the ELF section __ex_table)
     and returns the address of the associated fault handle code c0199ff5.
-6.) do_page_fault modifies its own return address to point to the fault 
+6.) do_page_fault modifies its own return address to point to the fault
     handle code and returns.
 7.) execution continues in the fault handling code.
 8.) 8a) EAX becomes -EFAULT (== -14)

MAINTAINERS

@@ -73,8 +73,8 @@ Note: For the hard of thinking, this list is meant to remain in alphabetical
 order. If you could add yourselves to it in alphabetical order that would be
 so much easier [Ed]
 
-P: Person
-M: Mail patches to
+P: Person (obsolete)
+M: Mail patches to: FullName <address@domain>
 L: Mailing list that is relevant to this area
 W: Web-page with status/info
 T: SCM tree type and location.  Type is one of: git, hg, quilt, stgit.
@@ -104,88 +104,74 @@ X: Files and directories that are NOT maintained, same rules as F:
    matches all files in and below net excluding net/ipv6/
 
 3C505 NETWORK DRIVER
-P:	Philip Blundell
-M:	philb@gnu.org
+M:	Philip Blundell <philb@gnu.org>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/3c505*
 
 3C59X NETWORK DRIVER
-P:	Steffen Klassert
-M:	klassert@mathematik.tu-chemnitz.de
+M:	Steffen Klassert <klassert@mathematik.tu-chemnitz.de>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	Documentation/networking/vortex.txt
 F:	drivers/net/3c59x.c
 
 3CR990 NETWORK DRIVER
-P:	David Dillow
-M:	dave@thedillows.org
+M:	David Dillow <dave@thedillows.org>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/typhoon*
 
 3W-9XXX SATA-RAID CONTROLLER DRIVER
-P:	Adam Radford
-M:	linuxraid@amcc.com
+M:	Adam Radford <linuxraid@amcc.com>
 L:	linux-scsi@vger.kernel.org
 W:	http://www.amcc.com
 S:	Supported
 F:	drivers/scsi/3w-9xxx*
 
 3W-XXXX ATA-RAID CONTROLLER DRIVER
-P:	Adam Radford
-M:	linuxraid@amcc.com
+M:	Adam Radford <linuxraid@amcc.com>
 L:	linux-scsi@vger.kernel.org
 W:	http://www.amcc.com
 S:	Supported
 F:	drivers/scsi/3w-xxxx*
 
 53C700 AND 53C700-66 SCSI DRIVER
-P:	James E.J. Bottomley
-M:	James.Bottomley@HansenPartnership.com
+M:	"James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
 L:	linux-scsi@vger.kernel.org
 S:	Maintained
 F:	drivers/scsi/53c700*
 
 6PACK NETWORK DRIVER FOR AX.25
-P:	Andreas Koensgen
-M:	ajk@iehk.rwth-aachen.de
+M:	Andreas Koensgen <ajk@comnets.uni-bremen.de>
 L:	linux-hams@vger.kernel.org
 S:	Maintained
 F:	drivers/net/hamradio/6pack.c
 
 8169 10/100/1000 GIGABIT ETHERNET DRIVER
-P:	Francois Romieu
-M:	romieu@fr.zoreil.com
+M:	Francois Romieu <romieu@fr.zoreil.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/r8169.c
 
 8250/16?50 (AND CLONE UARTS) SERIAL DRIVER
-P:	Alan Cox
-M:	alan@lxorguk.ukuu.org.uk
 L:	linux-serial@vger.kernel.org
 W:	http://serial.sourceforge.net
-S:	Odd Fixes
+S:	Orphan
 F:	drivers/serial/8250*
 F:	include/linux/serial_8250.h
 
 8390 NETWORK DRIVERS [WD80x3/SMC-ELITE, SMC-ULTRA, NE2000, 3C503, etc.]
-P:	Paul Gortmaker
-M:	p_gortmaker@yahoo.com
+M:	Paul Gortmaker <p_gortmaker@yahoo.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/*8390*
 F:	drivers/net/ax88796.c
 
 9P FILE SYSTEM
-P:	Eric Van Hensbergen
-M:	ericvh@gmail.com
-P:	Ron Minnich
-M:	rminnich@sandia.gov
-P:	Latchesar Ionkov
-M:	lucho@ionkov.net
+M:	Eric Van Hensbergen <ericvh@gmail.com>
+M:	Ron Minnich <rminnich@sandia.gov>
+M:	Latchesar Ionkov <lucho@ionkov.net>
 L:	v9fs-developer@lists.sourceforge.net
 W:	http://swik.net/v9fs
 T:	git git://git.kernel.org/pub/scm/linux/kernel/ericvh/v9fs.git
@@ -194,15 +180,13 @@ F:	Documentation/filesystems/9p.txt
 F:	fs/9p/
 
 A2232 SERIAL BOARD DRIVER
-P:	Enver Haase
-M:	A2232@gmx.net
+M:	Enver Haase <A2232@gmx.net>
 L:	linux-m68k@lists.linux-m68k.org
 S:	Maintained
 F:	drivers/char/ser_a2232*
 
 AACRAID SCSI RAID DRIVER
-P:	Adaptec OEM Raid Solutions
-M:	aacraid@adaptec.com
+M:	Adaptec OEM Raid Solutions <aacraid@adaptec.com>
 L:	linux-scsi@vger.kernel.org
 W:	http://www.adaptec.com/
 S:	Supported
@@ -210,44 +194,38 @@ F:	Documentation/scsi/aacraid.txt
 F:	drivers/scsi/aacraid/
 
 ABIT UGURU 1,2 HARDWARE MONITOR DRIVER
-P:	Hans de Goede
-M:	j.w.r.degoede@hhs.nl
+M:	Hans de Goede <j.w.r.degoede@hhs.nl>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	drivers/hwmon/abituguru.c
 
 ABIT UGURU 3 HARDWARE MONITOR DRIVER
-P:	Alistair John Strachan
-M:	alistair@devzero.co.uk
+M:	Alistair John Strachan <alistair@devzero.co.uk>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	drivers/hwmon/abituguru3.c
 
 ACENIC DRIVER
-P:	Jes Sorensen
-M:	jes@trained-monkey.org
+M:	Jes Sorensen <jes@trained-monkey.org>
 L:	linux-acenic@sunsite.dk
 S:	Maintained
 F:	drivers/net/acenic*
 
 ACER ASPIRE ONE TEMPERATURE AND FAN DRIVER
-P: Peter Feuerer
-M: peter@piie.net
-W: http://piie.net/?section=acerhdf
-S: Maintained
-F: drivers/platform/x86/acerhdf.c
+M:	Peter Feuerer <peter@piie.net>
+W:	http://piie.net/?section=acerhdf
+S:	Maintained
+F:	drivers/platform/x86/acerhdf.c
 
 ACER WMI LAPTOP EXTRAS
-P:	Carlos Corbacho
-M:	carlos@strangeworlds.co.uk
+M:	Carlos Corbacho <carlos@strangeworlds.co.uk>
 L:	aceracpi@googlegroups.com (subscribers-only)
 W:	http://code.google.com/p/aceracpi
 S:	Maintained
 F:	drivers/platform/x86/acer-wmi.c
 
 ACPI
-P:	Len Brown
-M:	lenb@kernel.org
+M:	Len Brown <lenb@kernel.org>
 L:	linux-acpi@vger.kernel.org
 W:	http://www.lesswatts.org/projects/acpi/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6.git
@@ -257,8 +235,7 @@ F:	drivers/pnp/pnpacpi/
 F:	include/linux/acpi.h
 
 ACPI BATTERY DRIVERS
-P:	Alexey Starikovskiy
-M:	astarikovskiy@suse.de
+M:	Alexey Starikovskiy <astarikovskiy@suse.de>
 L:	linux-acpi@vger.kernel.org
 W:	http://www.lesswatts.org/projects/acpi/
 S:	Supported
@@ -266,80 +243,69 @@ F:	drivers/acpi/battery.c
 F:	drivers/acpi/*sbs*
 
 ACPI EC DRIVER
-P:	Alexey Starikovskiy
-M:	astarikovskiy@suse.de
+M:	Alexey Starikovskiy <astarikovskiy@suse.de>
 L:	linux-acpi@vger.kernel.org
 W:	http://www.lesswatts.org/projects/acpi/
 S:	Supported
 F:	drivers/acpi/ec.c
 
 ACPI FAN DRIVER
-P:	Zhang Rui
-M:	rui.zhang@intel.com
+M:	Zhang Rui <rui.zhang@intel.com>
 L:	linux-acpi@vger.kernel.org
 W:	http://www.lesswatts.org/projects/acpi/
 S:	Supported
 F:	drivers/acpi/fan.c
 
 ACPI PCI HOTPLUG DRIVER
-P:	Kristen Carlson Accardi
-M:	kristen.c.accardi@intel.com
+M:	Kristen Carlson Accardi <kristen.c.accardi@intel.com>
 L:	linux-pci@vger.kernel.org
 S:	Supported
 F:	drivers/pci/hotplug/acpi*
 
 ACPI THERMAL DRIVER
-P:	Zhang Rui
-M:	rui.zhang@intel.com
+M:	Zhang Rui <rui.zhang@intel.com>
 L:	linux-acpi@vger.kernel.org
 W:	http://www.lesswatts.org/projects/acpi/
 S:	Supported
 F:	drivers/acpi/*thermal*
 
 ACPI VIDEO DRIVER
-P:	Zhang Rui
-M:	rui.zhang@intel.com
+M:	Zhang Rui <rui.zhang@intel.com>
 L:	linux-acpi@vger.kernel.org
 W:	http://www.lesswatts.org/projects/acpi/
 S:	Supported
 F:	drivers/acpi/video.c
 
 ACPI WMI DRIVER
-P:	Carlos Corbacho
-M:	carlos@strangeworlds.co.uk
+M:	Carlos Corbacho <carlos@strangeworlds.co.uk>
 L:	linux-acpi@vger.kernel.org
 W:	http://www.lesswatts.org/projects/acpi/
 S:	Maintained
 F:	drivers/platform/x86/wmi.c
 
 AD1889 ALSA SOUND DRIVER
-P:	Kyle McMartin
-M:	kyle@mcmartin.ca
-P:	Thibaut Varene
-M:	T-Bone@parisc-linux.org
+M:	Kyle McMartin <kyle@mcmartin.ca>
+M:	Thibaut Varene <T-Bone@parisc-linux.org>
 W:	http://wiki.parisc-linux.org/AD1889
 L:	linux-parisc@vger.kernel.org
 S:	Maintained
 F:	sound/pci/ad1889.*
 
 ADM1025 HARDWARE MONITOR DRIVER
-P:	Jean Delvare
-M:	khali@linux-fr.org
+M:	Jean Delvare <khali@linux-fr.org>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	Documentation/hwmon/adm1025
 F:	drivers/hwmon/adm1025.c
 
 ADM1029 HARDWARE MONITOR DRIVER
-P:	Corentin Labbe
-M:	corentin.labbe@geomatys.fr
+M:	Corentin Labbe <corentin.labbe@geomatys.fr>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	drivers/hwmon/adm1029.c
 
 ADM8211 WIRELESS DRIVER
-P:	Michael Wu
-M:	flamingice@sourmilk.net
+M:	Michael Wu <flamingice@sourmilk.net>
 L:	linux-wireless@vger.kernel.org
 W:	http://linuxwireless.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mwu/mac80211-drivers.git
@@ -347,35 +313,30 @@ S:	Maintained
 F:	drivers/net/wireless/adm8211.*
 
 ADT746X FAN DRIVER
-P:	Colin Leroy
-M:	colin@colino.net
+M:	Colin Leroy <colin@colino.net>
 S:	Maintained
 F:	drivers/macintosh/therm_adt746x.c
 
 ADVANSYS SCSI DRIVER
-P:	Matthew Wilcox
-M:	matthew@wil.cx
+M:	Matthew Wilcox <matthew@wil.cx>
 L:	linux-scsi@vger.kernel.org
 S:	Maintained
 F:	Documentation/scsi/advansys.txt
 F:	drivers/scsi/advansys.c
 
 AEDSP16 DRIVER
-P:	Riccardo Facchetti
-M:	fizban@tin.it
+M:	Riccardo Facchetti <fizban@tin.it>
 S:	Maintained
 F:	sound/oss/aedsp16.c
 
 AFFS FILE SYSTEM
-P:	Roman Zippel
-M:	zippel@linux-m68k.org
+M:	Roman Zippel <zippel@linux-m68k.org>
 S:	Maintained
 F:	Documentation/filesystems/affs.txt
 F:	fs/affs/
 
 AFS FILESYSTEM & AF_RXRPC SOCKET DOMAIN
-P:	David Howells
-M:	dhowells@redhat.com
+M:	David Howells <dhowells@redhat.com>
 L:	linux-afs@lists.infradead.org
 S:	Supported
 F:	fs/afs/
@@ -383,40 +344,35 @@ F:	include/net/af_rxrpc.h
 F:	net/rxrpc/af_rxrpc.c
 
 AGPGART DRIVER
-P:	David Airlie
-M:	airlied@linux.ie
+M:	David Airlie <airlied@linux.ie>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6.git
 S:	Maintained
 F:	drivers/char/agp/
 F:	include/linux/agp*
 
 AHA152X SCSI DRIVER
-P:	Juergen E. Fischer
-M:	fischer@norbit.de
+M:	"Juergen E. Fischer" <fischer@norbit.de>
 L:	linux-scsi@vger.kernel.org
 S:	Maintained
 F:	drivers/scsi/aha152x*
 F:	drivers/scsi/pcmcia/aha152x*
 
 AIC7XXX / AIC79XX SCSI DRIVER
-P:	Hannes Reinecke
-M:	hare@suse.de
+M:	Hannes Reinecke <hare@suse.de>
 L:	linux-scsi@vger.kernel.org
 S:	Maintained
 F:	drivers/scsi/aic7xxx/
 F:	drivers/scsi/aic7xxx_old/
 
 AIO
-P:	Benjamin LaHaise
-M:	bcrl@kvack.org
+M:	Benjamin LaHaise <bcrl@kvack.org>
 L:	linux-aio@kvack.org
 S:	Supported
 F:	fs/aio.c
 F:	include/linux/*aio*.h
 
 ALCATEL SPEEDTOUCH USB DRIVER
-P:	Duncan Sands
-M:	duncan.sands@free.fr
+M:	Duncan Sands <duncan.sands@free.fr>
 L:	linux-usb@vger.kernel.org
 W:	http://www.linux-usb.org/SpeedTouch/
 S:	Maintained
@@ -424,32 +380,27 @@ F:	drivers/usb/atm/speedtch.c
 F:	drivers/usb/atm/usbatm.c
 
 ALCHEMY AU1XX0 MMC DRIVER
-P:	Manuel Lauss
-M:	manuel.lauss@gmail.com
+M:	Manuel Lauss <manuel.lauss@gmail.com>
 S:	Maintained
 F:	drivers/mmc/host/au1xmmc.c
 
 ALI1563 I2C DRIVER
-P:	Rudolf Marek
-M:	r.marek@assembler.cz
+M:	Rudolf Marek <r.marek@assembler.cz>
 L:	linux-i2c@vger.kernel.org
 S:	Maintained
 F:	Documentation/i2c/busses/i2c-ali1563
 F:	drivers/i2c/busses/i2c-ali1563.c
 
 ALPHA PORT
-P:	Richard Henderson
-M:	rth@twiddle.net
+M:	Richard Henderson <rth@twiddle.net>
 S:	Odd Fixes for 2.4; Maintained for 2.6.
-P:	Ivan Kokshaysky
-M:	ink@jurassic.park.msu.ru
+M:	Ivan Kokshaysky <ink@jurassic.park.msu.ru>
 S:	Maintained for 2.4; PCI support for 2.6.
 L:	linux-alpha@vger.kernel.org
 F:	arch/alpha/
 
 AMD GEODE CS5536 USB DEVICE CONTROLLER DRIVER
-P:	Thomas Dahlmann
-M:	dahlmann.thomas@arcor.de
+M:	Thomas Dahlmann <dahlmann.thomas@arcor.de>
 L:	linux-geode@lists.infradead.org (moderated for non-subscribers)
 S:	Supported
 F:	drivers/usb/gadget/amd5536udc.*
@@ -466,8 +417,7 @@ F:	drivers/video/geode/
 F:	arch/x86/include/asm/geode.h
 
 AMD IOMMU (AMD-VI)
-P:	Joerg Roedel
-M:	joerg.roedel@amd.com
+M:	Joerg Roedel <joerg.roedel@amd.com>
 L:	iommu@lists.linux-foundation.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/joro/linux-2.6-iommu.git
 S:	Supported
@@ -475,40 +425,33 @@ F:	arch/x86/kernel/amd_iommu*.c
 F:	arch/x86/include/asm/amd_iommu*.h
 
 AMD MICROCODE UPDATE SUPPORT
-P:	Andreas Herrmann
-M:	andreas.herrmann3@amd.com
+M:	Andreas Herrmann <andreas.herrmann3@amd.com>
 L:	amd64-microcode@amd64.org
 S:	Supported
 F:	arch/x86/kernel/microcode_amd.c
 
 AMS (Apple Motion Sensor) DRIVER
-P:	Stelian Pop
-M:	stelian@popies.net
-P:	Michael Hanselmann
-M:	linux-kernel@hansmi.ch
+M:	Stelian Pop <stelian@popies.net>
+M:	Michael Hanselmann <linux-kernel@hansmi.ch>
 S:	Supported
 F:	drivers/hwmon/ams/
 
 AMSO1100 RNIC DRIVER
-P:	Tom Tucker
-M:	tom@opengridcomputing.com
-P:	Steve Wise
-M:	swise@opengridcomputing.com
+M:	Tom Tucker <tom@opengridcomputing.com>
+M:	Steve Wise <swise@opengridcomputing.com>
 L:	general@lists.openfabrics.org
 S:	Maintained
 F:	drivers/infiniband/hw/amso1100/
 
 AOA (Apple Onboard Audio) ALSA DRIVER
-P:	Johannes Berg
-M:	johannes@sipsolutions.net
+M:	Johannes Berg <johannes@sipsolutions.net>
 L:	linuxppc-dev@ozlabs.org
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 S:	Maintained
 F:	sound/aoa/
 
 APM DRIVER
-P:	Stephen Rothwell
-M:	sfr@canb.auug.org.au
+M:	Stephen Rothwell <sfr@canb.auug.org.au>
 L:	linux-laptop@vger.kernel.org
 W:	http://www.canb.auug.org.au/~sfr/
 S:	Supported
@@ -516,51 +459,44 @@ F:	arch/x86/kernel/apm_32.c
 F:	include/linux/apm_bios.h
 
 APPLE BCM5974 MULTITOUCH DRIVER
-P:	Henrik Rydberg
-M:	rydberg@euromail.se
+M:	Henrik Rydberg <rydberg@euromail.se>
 L:	linux-input@vger.kernel.org
 S:	Maintained
 F:	drivers/input/mouse/bcm5974.c
 
 APPLE SMC DRIVER
-P:	Nicolas Boichat
-M:	nicolas@boichat.ch
+M:	Nicolas Boichat <nicolas@boichat.ch>
 L:	mactel-linux-devel@lists.sourceforge.net
 S:	Maintained
 F:	drivers/hwmon/applesmc.c
 
 APPLETALK NETWORK LAYER
-P:	Arnaldo Carvalho de Melo
-M:	acme@ghostprotocols.net
+M:	Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
 S:	Maintained
 F:	drivers/net/appletalk/
 F:	net/appletalk/
 
 APPLETOUCH TOUCHPAD DRIVER
-P:	Johannes Berg
-M:	johannes@sipsolutions.net
+M:	Johannes Berg <johannes@sipsolutions.net>
 L:	linux-input@vger.kernel.org
 S:	Maintained
 F:	Documentation/input/appletouch.txt
 F:	drivers/input/mouse/appletouch.c
 
 ARC FRAMEBUFFER DRIVER
-P:	Jaya Kumar
-M:	jayalk@intworks.biz
+M:	Jaya Kumar <jayalk@intworks.biz>
 S:	Maintained
 F:	drivers/video/arcfb.c
 F:	drivers/video/fb_defio.c
 
 ARM MFM AND FLOPPY DRIVERS
-P:	Ian Molton
-M:	spyro@f2s.com
+M:	Ian Molton <spyro@f2s.com>
 S:	Maintained
 F:	arch/arm/lib/floppydma.S
 F:	arch/arm/include/asm/floppy.h
 
 ARM PORT
-P:	Russell King
-M:	linux@arm.linux.org.uk
+M:	Russell King <linux@arm.linux.org.uk>
 L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
 W:	http://www.arm.linux.org.uk/
 S:	Maintained
@@ -571,79 +507,67 @@ S:	Orphan
 F:	drivers/mmc/host/mmci.*
 
 ARM/ADI ROADRUNNER MACHINE SUPPORT
-P:	Lennert Buytenhek
-M:	kernel@wantstofly.org
+M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 F:	arch/arm/mach-ixp23xx/
 F:	arch/arm/mach-ixp23xx/include/mach/
 
 ARM/ADS SPHERE MACHINE SUPPORT
-P:	Lennert Buytenhek
-M:	kernel@wantstofly.org
+M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
 ARM/AFEB9260 MACHINE SUPPORT
-P:	Sergey Lapin
-M:	slapin@ossfans.org
+M:	Sergey Lapin <slapin@ossfans.org>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
 ARM/AJECO 1ARM MACHINE SUPPORT
-P:	Lennert Buytenhek
-M:	kernel@wantstofly.org
+M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
 ARM/ATMEL AT91RM9200 ARM ARCHITECTURE
-P:	Andrew Victor
-M:	linux@maxim.org.za
+M:	Andrew Victor <linux@maxim.org.za>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 W:	http://maxim.org.za/at91_26.html
 S:	Maintained
 
 ARM/CIRRUS LOGIC EP93XX ARM ARCHITECTURE
-P:	Lennert Buytenhek
-M:	kernel@wantstofly.org
+M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
 ARM/CIRRUS LOGIC EDB9315A MACHINE SUPPORT
-P:	Lennert Buytenhek
-M:	kernel@wantstofly.org
+M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
 ARM/CLKDEV SUPPORT
-P:	Russell King
-M:	linux@arm.linux.org.uk
+M:	Russell King <linux@arm.linux.org.uk>
 L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
 F:	arch/arm/common/clkdev.c
 F:	arch/arm/include/asm/clkdev.h
 
 ARM/COMPULAB CM-X270/EM-X270 and CM-X300 MACHINE SUPPORT
-P:	Mike Rapoport
-M:	mike@compulab.co.il
+M:	Mike Rapoport <mike@compulab.co.il>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
 ARM/CORGI MACHINE SUPPORT
-P:	Richard Purdie
-M:	rpurdie@rpsys.net
+M:	Richard Purdie <rpurdie@rpsys.net>
 S:	Maintained
 
 ARM/CORTINA SYSTEMS GEMINI ARM ARCHITECTURE
-P:	Paulius Zaleckas
-M:	paulius.zaleckas@teltonika.lt
+M:	Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 T:	git git://gitorious.org/linux-gemini/mainline.git
 S:	Maintained
 F:	arch/arm/mach-gemini/
 
 ARM/EBSA110 MACHINE SUPPORT
-P:	Russell King
-M:	linux@arm.linux.org.uk
+M:	Russell King <linux@arm.linux.org.uk>
 L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
 W:	http://www.arm.linux.org.uk/
 S:	Maintained
@@ -651,12 +575,9 @@ F:	arch/arm/mach-ebsa110/
 F:	drivers/net/arm/am79c961a.*
 
 ARM/EZX SMARTPHONES (A780, A910, A1200, E680, ROKR E2 and ROKR E6)
-P:	Daniel Ribeiro
-M:	drwyrm@gmail.com
-P:	Stefan Schmidt
-M:	stefan@openezx.org
-P:	Harald Welte
-M:	laforge@openezx.org
+M:	Daniel Ribeiro <drwyrm@gmail.com>
+M:	Stefan Schmidt <stefan@openezx.org>
+M:	Harald Welte <laforge@openezx.org>
 L:	openezx-devel@lists.openezx.org (subscribers-only)
 W:	http://www.openezx.org/
 S:	Maintained
@@ -664,15 +585,13 @@ T:	topgit git://git.openezx.org/openezx.git
 F:	arch/arm/mach-pxa/ezx.c
 
 ARM/FARADAY FA526 PORT
-P:	Paulius Zaleckas
-M:	paulius.zaleckas@teltonika.lt
+M:	Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 F:	arch/arm/mm/*-fa*
 
 ARM/FOOTBRIDGE ARCHITECTURE
-P:	Russell King
-M:	linux@arm.linux.org.uk
+M:	Russell King <linux@arm.linux.org.uk>
 L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
 W:	http://www.arm.linux.org.uk/
 S:	Maintained
@@ -680,175 +599,146 @@ F:	arch/arm/include/asm/hardware/dec21285.h
 F:	arch/arm/mach-footbridge/
 
 ARM/FREESCALE IMX / MXC ARM ARCHITECTURE
-P:	Sascha Hauer
-M:	kernel@pengutronix.de
+M:	Sascha Hauer <kernel@pengutronix.de>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
 ARM/GLOMATION GESBC9312SX MACHINE SUPPORT
-P:	Lennert Buytenhek
-M:	kernel@wantstofly.org
+M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
 ARM/GUMSTIX MACHINE SUPPORT
-P:	Steve Sakoman
-M:	sakoman@gmail.com
+M:	Steve Sakoman <sakoman@gmail.com>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
 ARM/H4700 (HP IPAQ HX4700) MACHINE SUPPORT
-P:	Philipp Zabel
-M:	philipp.zabel@gmail.com
+M:	Philipp Zabel <philipp.zabel@gmail.com>
 S:	Maintained
 F:	arch/arm/mach-pxa/hx4700.c
 F:	arch/arm/mach-pxa/include/mach/hx4700.h
 
 ARM/HP JORNADA 7XX MACHINE SUPPORT
-P:	Kristoffer Ericson
-M:	kristoffer.ericson@gmail.com
+M:	Kristoffer Ericson <kristoffer.ericson@gmail.com>
 W:	www.jlime.com
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kristoffer/linux-hpc.git
+F:	arch/arm/mach-sa1100/jornada720.c
+F:	arch/arm/mach-sa1100/include/mach/jornada720.h
 
 ARM/INTEL IOP32X ARM ARCHITECTURE
-P:	Lennert Buytenhek
-M:	kernel@wantstofly.org
-P:	Dan Williams
-M:	dan.j.williams@intel.com
+M:	Lennert Buytenhek <kernel@wantstofly.org>
+M:	Dan Williams <dan.j.williams@intel.com>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Supported
 
 ARM/INTEL IOP33X ARM ARCHITECTURE
-P:	Dan Williams
-M:	dan.j.williams@intel.com
+M:	Dan Williams <dan.j.williams@intel.com>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Supported
 
 ARM/INTEL IOP13XX ARM ARCHITECTURE
-P:	Lennert Buytenhek
-M:	kernel@wantstofly.org
-P:	Dan Williams
-M:	dan.j.williams@intel.com
+M:	Lennert Buytenhek <kernel@wantstofly.org>
+M:	Dan Williams <dan.j.williams@intel.com>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Supported
 
 ARM/INTEL IQ81342EX MACHINE SUPPORT
-P:	Lennert Buytenhek
-M:	kernel@wantstofly.org
-P:	Dan Williams
-M:	dan.j.williams@intel.com
+M:	Lennert Buytenhek <kernel@wantstofly.org>
+M:	Dan Williams <dan.j.williams@intel.com>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Supported
 
 ARM/INTEL IXP2000 ARM ARCHITECTURE
-P:	Lennert Buytenhek
-M:	kernel@wantstofly.org
+M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
 ARM/INTEL IXDP2850 MACHINE SUPPORT
-P:	Lennert Buytenhek
-M:	kernel@wantstofly.org
+M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
 ARM/INTEL IXP23XX ARM ARCHITECTURE
-P:	Lennert Buytenhek
-M:	kernel@wantstofly.org
+M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
 ARM/INTEL XSC3 (MANZANO) ARM CORE
-P:	Lennert Buytenhek
-M:	kernel@wantstofly.org
-P:	Dan Williams
-M:	dan.j.williams@intel.com
+M:	Lennert Buytenhek <kernel@wantstofly.org>
+M:	Dan Williams <dan.j.williams@intel.com>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Supported
 
 ARM/IP FABRICS DOUBLE ESPRESSO MACHINE SUPPORT
-P:	Lennert Buytenhek
-M:	kernel@wantstofly.org
+M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
 ARM/LOGICPD PXA270 MACHINE SUPPORT
-P:	Lennert Buytenhek
-M:	kernel@wantstofly.org
+M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
 ARM/MAGICIAN MACHINE SUPPORT
-P:	Philipp Zabel
-M:	philipp.zabel@gmail.com
+M:	Philipp Zabel <philipp.zabel@gmail.com>
 S:	Maintained
 
 ARM/MIOA701 MACHINE SUPPORT
-P:	Robert Jarzmik
-M:	robert.jarzmik@free.fr
+M:	Robert Jarzmik <robert.jarzmik@free.fr>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 F:	arch/arm/mach-pxa/mioa701.c
 S:	Maintained
 
 ARM/NEC MOBILEPRO 900/c MACHINE SUPPORT
-P:	Michael Petchkovsky
-M:	mkpetch@internode.on.net
+M:	Michael Petchkovsky <mkpetch@internode.on.net>
 S:	Maintained
 
 ARM/OPENMOKO NEO FREERUNNER (GTA02) MACHINE SUPPORT
-P:	Nelson Castillo
-M:	arhuaco@freaks-unidos.net
+M:	Nelson Castillo <arhuaco@freaks-unidos.net>
 L:	openmoko-kernel@lists.openmoko.org (subscribers-only)
 W:	http://wiki.openmoko.org/wiki/Neo_FreeRunner
 S:	Supported
 
 ARM/TOSA MACHINE SUPPORT
-P:	Dmitry Eremin-Solenikov
-M:	dbaryshkov@gmail.com
-P:	Dirk Opfer
-M:	dirk@opfer-online.de
+M:	Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
+M:	Dirk Opfer <dirk@opfer-online.de>
 S:	Maintained
 
 ARM/PALMTX,PALMT5,PALMLD,PALMTE2 SUPPORT
-P:	Marek Vasut
-M:	marek.vasut@gmail.com
+M:	Marek Vasut <marek.vasut@gmail.com>
 W:	http://hackndev.com
 S:	Maintained
 
 ARM/PALM TREO 680 SUPPORT
-P:	Tomas Cech
-M:	sleep_walker@suse.cz
+M:	Tomas Cech <sleep_walker@suse.cz>
 W:	http://hackndev.com
 S:	Maintained
 
 ARM/PALMZ72 SUPPORT
-P:	Sergey Lapin
-M:	slapin@ossfans.org
+M:	Sergey Lapin <slapin@ossfans.org>
 W:	http://hackndev.com
 S:	Maintained
 
 ARM/PLEB SUPPORT
-P:	Peter Chubb
-M:	pleb@gelato.unsw.edu.au
+M:	Peter Chubb <pleb@gelato.unsw.edu.au>
 W:	http://www.disy.cse.unsw.edu.au/Hardware/PLEB
 S:	Maintained
 
 ARM/PT DIGITAL BOARD PORT
-P:	Stefan Eletzhofer
-M:	stefan.eletzhofer@eletztrick.de
+M:	Stefan Eletzhofer <stefan.eletzhofer@eletztrick.de>
 L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
 W:	http://www.arm.linux.org.uk/
 S:	Maintained
 
 ARM/RADISYS ENP2611 MACHINE SUPPORT
-P:	Lennert Buytenhek
-M:	kernel@wantstofly.org
+M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
 ARM/RISCPC ARCHITECTURE
-P:	Russell King
-M:	linux@arm.linux.org.uk
+M:	Russell King <linux@arm.linux.org.uk>
 L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
 W:	http://www.arm.linux.org.uk/
 S:	Maintained
@@ -862,63 +752,86 @@ F:	drivers/net/arm/ether*
 F:	drivers/scsi/arm/
 
 ARM/SHARK MACHINE SUPPORT
-P:	Alexander Schulz
-M:	alex@shark-linux.de
+M:	Alexander Schulz <alex@shark-linux.de>
 W:	http://www.shark-linux.de/shark.html
 S:	Maintained
 
+ARM/SAMSUNG ARM ARCHITECTURES
+M:	Ben Dooks <ben-linux@fluff.org>
+L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
+W:	http://www.fluff.org/ben/linux/
+S:	Maintained
+F:	arch/arm/plat-s3c/
+F:	arch/arm/plat-s3c24xx/
+
 ARM/S3C2410 ARM ARCHITECTURE
-P:	Ben Dooks
-M:	ben-linux@fluff.org
+M:	Ben Dooks <ben-linux@fluff.org>
 L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
 W:	http://www.fluff.org/ben/linux/
 S:	Maintained
+F:	arch/arm/mach-s3c2410/
 
 ARM/S3C2440 ARM ARCHITECTURE
-P:	Ben Dooks
-M:	ben-linux@fluff.org
+M:	Ben Dooks <ben-linux@fluff.org>
+L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
+W:	http://www.fluff.org/ben/linux/
+S:	Maintained
+F:	arch/arm/mach-s3c2440/
+
+ARM/S3C2442 ARM ARCHITECTURE
+M:	Ben Dooks <ben-linux@fluff.org>
+L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
+W:	http://www.fluff.org/ben/linux/
+S:	Maintained
+F:	arch/arm/mach-s3c2442/
+
+ARM/S3C2443 ARM ARCHITECTURE
+M:	Ben Dooks <ben-linux@fluff.org>
 L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
 W:	http://www.fluff.org/ben/linux/
 S:	Maintained
+F:	arch/arm/mach-s3c2443/
+
+ARM/S3C6400 ARM ARCHITECTURE
+M:	Ben Dooks <ben-linux@fluff.org>
+L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
+W:	http://www.fluff.org/ben/linux/
+S:	Maintained
+F:	arch/arm/mach-s3c6400/
+
+ARM/S3C6410 ARM ARCHITECTURE
+M:	Ben Dooks <ben-linux@fluff.org>
+L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
+W:	http://www.fluff.org/ben/linux/
+S:	Maintained
+F:	arch/arm/mach-s3c6410/
 
 ARM/TECHNOLOGIC SYSTEMS TS7250 MACHINE SUPPORT
-P:	Lennert Buytenhek
-M:	kernel@wantstofly.org
+M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
 ARM/THECUS N2100 MACHINE SUPPORT
-P:	Lennert Buytenhek
-M:	kernel@wantstofly.org
+M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
 ARM/NUVOTON W90X900 ARM ARCHITECTURE
-P:	Wan ZongShun
-M:	mcuos.com@gmail.com
+M:	Wan ZongShun <mcuos.com@gmail.com>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 W:	http://www.mcuos.com
 S:	Maintained
 
 ARM/VFP SUPPORT
-P:	Russell King
-M:	linux@arm.linux.org.uk
+M:	Russell King <linux@arm.linux.org.uk>
 L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
 W:	http://www.arm.linux.org.uk/
 S:	Maintained
 F:	arch/arm/vfp/
 
-ARPD SUPPORT
-P:	Jonathan Layes
-L:	netdev@vger.kernel.org
-S:	Maintained
-F:	net/ipv4/arp.c
-
 ASUS ACPI EXTRAS DRIVER
-P:	Corentin Chary
-M:	corentincj@iksaif.net
-P:	Karol Kozimor
-M:	sziwan@users.sourceforge.net
+M:	Corentin Chary <corentincj@iksaif.net>
+M:	Karol Kozimor <sziwan@users.sourceforge.net>
 L:	acpi4asus-user@lists.sourceforge.net
 W:	http://acpi4asus.sf.net
 S:	Maintained
@@ -926,25 +839,21 @@ F:	arch/x86/kernel/acpi/boot.c
 F:	drivers/platform/x86/asus_acpi.c
 
 ASUS ASB100 HARDWARE MONITOR DRIVER
-P:	Mark M. Hoffman
-M:	mhoffman@lightlink.com
+M:	"Mark M. Hoffman" <mhoffman@lightlink.com>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	drivers/hwmon/asb100.c
 
 ASUS LAPTOP EXTRAS DRIVER
-P:	Corentin Chary
-M:	corentincj@iksaif.net
+M:	Corentin Chary <corentincj@iksaif.net>
 L:	acpi4asus-user@lists.sourceforge.net
 W:	http://acpi4asus.sf.net
 S:	Maintained
 F:	drivers/platform/x86/asus-laptop.c
 
 ASYNCHRONOUS TRANSFERS/TRANSFORMS (IOAT) API
-P:	Dan Williams
-M:	dan.j.williams@intel.com
-P:	Maciej Sosnowski
-M:	maciej.sosnowski@intel.com
+M:	Dan Williams <dan.j.williams@intel.com>
+M:	Maciej Sosnowski <maciej.sosnowski@intel.com>
 W:	http://sourceforge.net/projects/xscaleiop
 S:	Supported
 F:	Documentation/crypto/async-tx-api.txt
@@ -954,64 +863,49 @@ F:	include/linux/dmaengine.h
 F:	include/linux/async_tx.h
 
 ATA OVER ETHERNET (AOE) DRIVER
-P:	Ed L. Cashin
-M:	ecashin@coraid.com
+M:	"Ed L. Cashin" <ecashin@coraid.com>
 W:	http://www.coraid.com/support/linux
 S:	Supported
 F:	Documentation/aoe/
 F:	drivers/block/aoe/
 
 ATHEROS ATH5K WIRELESS DRIVER
-P:	Jiri Slaby
-M:	jirislaby@gmail.com
-P:	Nick Kossifidis
-M:	mickflemm@gmail.com
-P:	Luis R. Rodriguez
-M:	lrodriguez@atheros.com
-P:	Bob Copeland
-M:	me@bobcopeland.com
+M:	Jiri Slaby <jirislaby@gmail.com>
+M:	Nick Kossifidis <mickflemm@gmail.com>
+M:	"Luis R. Rodriguez" <lrodriguez@atheros.com>
+M:	Bob Copeland <me@bobcopeland.com>
 L:	linux-wireless@vger.kernel.org
 L:	ath5k-devel@lists.ath5k.org
 S:	Maintained
 F:	drivers/net/wireless/ath/ath5k/
 
 ATHEROS ATH9K WIRELESS DRIVER
-P:	Luis R. Rodriguez
-M:	lrodriguez@atheros.com
-P:	Jouni Malinen
-M:	jmalinen@atheros.com
-P:	Sujith Manoharan
-M:	Sujith.Manoharan@atheros.com
-P:	Vasanthakumar Thiagarajan
-M:	vasanth@atheros.com
-P:	Senthil Balasubramanian
-M:	senthilkumar@atheros.com
+M:	"Luis R. Rodriguez" <lrodriguez@atheros.com>
+M:	Jouni Malinen <jmalinen@atheros.com>
+M:	Sujith Manoharan <Sujith.Manoharan@atheros.com>
+M:	Vasanthakumar Thiagarajan <vasanth@atheros.com>
+M:	Senthil Balasubramanian <senthilkumar@atheros.com>
 L:	linux-wireless@vger.kernel.org
 L:	ath9k-devel@lists.ath9k.org
 S:	Supported
 F:	drivers/net/wireless/ath/ath9k/
 
 ATHEROS AR9170 WIRELESS DRIVER
-P:	Christian Lamparter
-M:	chunkeey@web.de
+M:	Christian Lamparter <chunkeey@web.de>
 L:	linux-wireless@vger.kernel.org
 W:	http://wireless.kernel.org/en/users/Drivers/ar9170
 S:	Maintained
 F:	drivers/net/wireless/ath/ar9170/
 
 ATI_REMOTE2 DRIVER
-P:	Ville Syrjala
-M:	syrjala@sci.fi
+M:	Ville Syrjala <syrjala@sci.fi>
 S:	Maintained
 F:	drivers/input/misc/ati_remote2.c
 
 ATLX ETHERNET DRIVERS
-P:	Jay Cliburn
-M:	jcliburn@gmail.com
-P:	Chris Snook
-M:	csnook@redhat.com
-P:	Jie Yang
-M:	jie.yang@atheros.com
+M:	Jay Cliburn <jcliburn@gmail.com>
+M:	Chris Snook <csnook@redhat.com>
+M:	Jie Yang <jie.yang@atheros.com>
 L:	atl1-devel@lists.sourceforge.net
 W:	http://sourceforge.net/projects/atl1
 W:	http://atl1.sourceforge.net
@@ -1019,8 +913,7 @@ S:	Maintained
 F:	drivers/net/atlx/
 
 ATM
-P:	Chas Williams
-M:	chas@cmf.nrl.navy.mil
+M:	Chas Williams <chas@cmf.nrl.navy.mil>
 L:	linux-atm-general@lists.sourceforge.net (subscribers-only)
 L:	netdev@vger.kernel.org
 W:	http://linux-atm.sourceforge.net
@@ -1029,8 +922,7 @@ F:	drivers/atm/
 F:	include/linux/atm*
 
 ATMEL AT91 MCI DRIVER
-P:	Nicolas Ferre
-M:	nicolas.ferre@atmel.com
+M:	Nicolas Ferre <nicolas.ferre@atmel.com>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 W:	http://www.atmel.com/products/AT91/
 W:	http://www.at91.com/
@@ -1038,49 +930,42 @@ S:	Maintained
 F:	drivers/mmc/host/at91_mci.c
 
 ATMEL AT91 / AT32 MCI DRIVER
-P:	Nicolas Ferre
-M:	nicolas.ferre@atmel.com
+M:	Nicolas Ferre <nicolas.ferre@atmel.com>
 S:	Maintained
 F:	drivers/mmc/host/atmel-mci.c
 F:	drivers/mmc/host/atmel-mci-regs.h
 
 ATMEL AT91 / AT32 SERIAL DRIVER
-P:	Haavard Skinnemoen
-M:	hskinnemoen@atmel.com
+M:	Haavard Skinnemoen <hskinnemoen@atmel.com>
 S:	Supported
 F:	drivers/serial/atmel_serial.c
 
 ATMEL LCDFB DRIVER
-P:	Nicolas Ferre
-M:	nicolas.ferre@atmel.com
+M:	Nicolas Ferre <nicolas.ferre@atmel.com>
 L:	linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
 S:	Maintained
 F:	drivers/video/atmel_lcdfb.c
 F:	include/video/atmel_lcdc.h
 
 ATMEL MACB ETHERNET DRIVER
-P:	Haavard Skinnemoen
-M:	hskinnemoen@atmel.com
+M:	Haavard Skinnemoen <hskinnemoen@atmel.com>
 S:	Supported
 F:	drivers/net/macb.*
 
 ATMEL SPI DRIVER
-P:	Haavard Skinnemoen
-M:	hskinnemoen@atmel.com
+M:	Haavard Skinnemoen <hskinnemoen@atmel.com>
 S:	Supported
 F:	drivers/spi/atmel_spi.*
 
 ATMEL USBA UDC DRIVER
-P:	Haavard Skinnemoen
-M:	hskinnemoen@atmel.com
+M:	Haavard Skinnemoen <hskinnemoen@atmel.com>
 L:	kernel@avr32linux.org
 W:	http://avr32linux.org/twiki/bin/view/Main/AtmelUsbDeviceDriver
 S:	Supported
 F:	drivers/usb/gadget/atmel_usba_udc.*
 
 ATMEL WIRELESS DRIVER
-P:	Simon Kelley
-M:	simon@thekelleys.org.uk
+M:	Simon Kelley <simon@thekelleys.org.uk>
 L:	linux-wireless@vger.kernel.org
 W:	http://www.thekelleys.org.uk/atmel
 W:	http://atmelwlandriver.sourceforge.net/
@@ -1088,10 +973,8 @@ S:	Maintained
 F:	drivers/net/wireless/atmel*
 
 AUDIT SUBSYSTEM
-P:	Al Viro
-M:	viro@zeniv.linux.org.uk
-P:	Eric Paris
-M:	eparis@redhat.com
+M:	Al Viro <viro@zeniv.linux.org.uk>
+M:	Eric Paris <eparis@redhat.com>
 L:	linux-audit@redhat.com (subscribers-only)
 W:	http://people.redhat.com/sgrubb/audit/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current.git
@@ -1100,8 +983,7 @@ F:	include/linux/audit.h
 F:	kernel/audit*
 
 AUXILIARY DISPLAY DRIVERS
-P:	Miguel Ojeda Sandonis
-M:	miguel.ojeda.sandonis@gmail.com
+M:	Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com>
 W:	http://miguelojeda.es/auxdisplay.htm
 W:	http://jair.lab.fi.uva.es/~migojed/auxdisplay.htm
 S:	Maintained
@@ -1109,8 +991,7 @@ F:	drivers/auxdisplay/
 F:	include/linux/cfag12864b.h
 
 AVR32 ARCHITECTURE
-P:	Haavard Skinnemoen
-M:	hskinnemoen@atmel.com
+M:	Haavard Skinnemoen <hskinnemoen@atmel.com>
 W:	http://www.atmel.com/products/AVR32/
 W:	http://avr32linux.org/
 W:	http://avrfreaks.net/
@@ -1118,14 +999,12 @@ S:	Supported
 F:	arch/avr32/
 
 AVR32/AT32AP MACHINE SUPPORT
-P:	Haavard Skinnemoen
-M:	hskinnemoen@atmel.com
+M:	Haavard Skinnemoen <hskinnemoen@atmel.com>
 S:	Supported
 F:	arch/avr32/mach-at32ap/
 
 AX.25 NETWORK LAYER
-P:	Ralf Baechle
-M:	ralf@linux-mips.org
+M:	Ralf Baechle <ralf@linux-mips.org>
 L:	linux-hams@vger.kernel.org
 W:	http://www.linux-ax25.org/
 S:	Maintained
@@ -1134,128 +1013,110 @@ F:	include/net/ax25.h
 F:	net/ax25/
 
 B43 WIRELESS DRIVER
-P:	Michael Buesch
-M:	mb@bu3sch.de
-P:	Stefano Brivio
-M:	stefano.brivio@polimi.it
+M:	Michael Buesch <mb@bu3sch.de>
+M:	Stefano Brivio <stefano.brivio@polimi.it>
 L:	linux-wireless@vger.kernel.org
 W:	http://linuxwireless.org/en/users/Drivers/b43
 S:	Maintained
 F:	drivers/net/wireless/b43/
 
 B43LEGACY WIRELESS DRIVER
-P:	Larry Finger
-M:	Larry.Finger@lwfinger.net
-P:	Stefano Brivio
-M:	stefano.brivio@polimi.it
+M:	Larry Finger <Larry.Finger@lwfinger.net>
+M:	Stefano Brivio <stefano.brivio@polimi.it>
 L:	linux-wireless@vger.kernel.org
 W:	http://linuxwireless.org/en/users/Drivers/b43
 S:	Maintained
 F:	drivers/net/wireless/b43legacy/
 
 BACKLIGHT CLASS/SUBSYSTEM
-P:	Richard Purdie
-M:	rpurdie@rpsys.net
+M:	Richard Purdie <rpurdie@rpsys.net>
 S:	Maintained
 F:	drivers/video/backlight/
 F:	include/linux/backlight.h
 
 BAYCOM/HDLCDRV DRIVERS FOR AX.25
-P:	Thomas Sailer
-M:	t.sailer@alumni.ethz.ch
+M:	Thomas Sailer <t.sailer@alumni.ethz.ch>
 L:	linux-hams@vger.kernel.org
 W:	http://www.baycom.org/~tom/ham/ham.html
 S:	Maintained
 F:	drivers/net/hamradio/baycom*
 
 BEFS FILE SYSTEM
-P:	Sergey S. Kostyliov
-M:	rathamahata@php4.ru
+M:	"Sergey S. Kostyliov" <rathamahata@php4.ru>
 S:	Maintained
 F:	Documentation/filesystems/befs.txt
 F:	fs/befs/
 
 BFS FILE SYSTEM
-P:	Tigran A. Aivazian
-M:	tigran@aivazian.fsnet.co.uk
+M:	"Tigran A. Aivazian" <tigran@aivazian.fsnet.co.uk>
 S:	Maintained
 F:	Documentation/filesystems/bfs.txt
 F:	fs/bfs/
 F:	include/linux/bfs_fs.h
 
 BLACKFIN ARCHITECTURE
-P:	Mike Frysinger
-M:	vapier@gentoo.org
+M:	Mike Frysinger <vapier@gentoo.org>
 L:	uclinux-dist-devel@blackfin.uclinux.org
 W:	http://blackfin.uclinux.org
 S:	Supported
 F:	arch/blackfin/
 
 BLACKFIN EMAC DRIVER
-P:	Michael Hennerich
-M:	michael.hennerich@analog.com
+M:	Michael Hennerich <michael.hennerich@analog.com>
 L:	uclinux-dist-devel@blackfin.uclinux.org
 W:	http://blackfin.uclinux.org
 S:	Supported
 F:	drivers/net/bfin_mac.*
 
 BLACKFIN RTC DRIVER
-P:	Mike Frysinger
-M:	vapier.adi@gmail.com
+M:	Mike Frysinger <vapier.adi@gmail.com>
 L:	uclinux-dist-devel@blackfin.uclinux.org
 W:	http://blackfin.uclinux.org
 S:	Supported
 F:	drivers/rtc/rtc-bfin.c
 
 BLACKFIN SERIAL DRIVER
-P:	Sonic Zhang
-M:	sonic.zhang@analog.com
+M:	Sonic Zhang <sonic.zhang@analog.com>
 L:	uclinux-dist-devel@blackfin.uclinux.org
 W:	http://blackfin.uclinux.org
 S:	Supported
 F:	drivers/serial/bfin_5xx.c
 
 BLACKFIN WATCHDOG DRIVER
-P:	Mike Frysinger
-M:	vapier.adi@gmail.com
+M:	Mike Frysinger <vapier.adi@gmail.com>
 L:	uclinux-dist-devel@blackfin.uclinux.org
 W:	http://blackfin.uclinux.org
 S:	Supported
 F:	drivers/watchdog/bfin_wdt.c
 
 BLACKFIN I2C TWI DRIVER
-P:	Sonic Zhang
-M:	sonic.zhang@analog.com
+M:	Sonic Zhang <sonic.zhang@analog.com>
 L:	uclinux-dist-devel@blackfin.uclinux.org
 W:	http://blackfin.uclinux.org/
 S:	Supported
 F:	drivers/i2c/busses/i2c-bfin-twi.c
 
 BLOCK LAYER
-P:	Jens Axboe
-M:	axboe@kernel.dk
+M:	Jens Axboe <axboe@kernel.dk>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-2.6-block.git
 S:	Maintained
 F:	block/
 
 BLOCK2MTD DRIVER
-P:	Joern Engel
-M:	joern@lazybastard.org
+M:	Joern Engel <joern@lazybastard.org>
 L:	linux-mtd@lists.infradead.org
 S:	Maintained
 F:	drivers/mtd/devices/block2mtd.c
 
 BLUETOOTH DRIVERS
-P:	Marcel Holtmann
-M:	marcel@holtmann.org
+M:	Marcel Holtmann <marcel@holtmann.org>
 L:	linux-bluetooth@vger.kernel.org
 W:	http://www.bluez.org/
 S:	Maintained
 F:	drivers/bluetooth/
 
 BLUETOOTH SUBSYSTEM
-P:	Marcel Holtmann
-M:	marcel@holtmann.org
+M:	Marcel Holtmann <marcel@holtmann.org>
 L:	linux-bluetooth@vger.kernel.org
 W:	http://www.bluez.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/holtmann/bluetooth-2.6.git
@@ -1264,8 +1125,7 @@ F:	net/bluetooth/
 F:	include/net/bluetooth/
 
 BONDING DRIVER
-P:	Jay Vosburgh
-M:	fubar@us.ibm.com
+M:	Jay Vosburgh <fubar@us.ibm.com>
 L:	bonding-devel@lists.sourceforge.net
 W:	http://sourceforge.net/projects/bonding/
 S:	Supported
@@ -1273,54 +1133,46 @@ F:	drivers/net/bonding/
 F:	include/linux/if_bonding.h
 
 BROADCOM B44 10/100 ETHERNET DRIVER
-P:	Gary Zambrano
-M:	zambrano@broadcom.com
+M:	Gary Zambrano <zambrano@broadcom.com>
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/b44.*
 
 BROADCOM BNX2 GIGABIT ETHERNET DRIVER
-P:	Michael Chan
-M:	mchan@broadcom.com
+M:	Michael Chan <mchan@broadcom.com>
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/bnx2.*
 F:	drivers/net/bnx2_*
 
 BROADCOM BNX2X 10 GIGABIT ETHERNET DRIVER
-P:	Eilon Greenstein
-M:	eilong@broadcom.com
+M:	Eilon Greenstein <eilong@broadcom.com>
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/bnx2x*
 
 BROADCOM TG3 GIGABIT ETHERNET DRIVER
-P:	Matt Carlson
-M:	mcarlson@broadcom.com
-P:	Michael Chan
-M:	mchan@broadcom.com
+M:	Matt Carlson <mcarlson@broadcom.com>
+M:	Michael Chan <mchan@broadcom.com>
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/tg3.*
 
 BSG (block layer generic sg v4 driver)
-P:	FUJITA Tomonori
-M:	fujita.tomonori@lab.ntt.co.jp
+M:	FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
 L:	linux-scsi@vger.kernel.org
 S:	Supported
 F:	block/bsg.c
 F:	include/linux/bsg.h
 
 BT8XXGPIO DRIVER
-P:	Michael Buesch
-M:	mb@bu3sch.de
+M:	Michael Buesch <mb@bu3sch.de>
 W:	http://bu3sch.de/btgpio.php
 S:	Maintained
 F:	drivers/gpio/bt8xxgpio.c
 
 BTRFS FILE SYSTEM
-P:	Chris Mason
-M:	chris.mason@oracle.com
+M:	Chris Mason <chris.mason@oracle.com>
 L:	linux-btrfs@vger.kernel.org
 W:	http://btrfs.wiki.kernel.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable.git
@@ -1329,8 +1181,7 @@ F:	Documentation/filesystems/btrfs.txt
 F:	fs/btrfs/
 
 BTTV VIDEO4LINUX DRIVER
-P:	Mauro Carvalho Chehab
-M:	mchehab@infradead.org
+M:	Mauro Carvalho Chehab <mchehab@infradead.org>
 L:	linux-media@vger.kernel.org
 W:	http://linuxtv.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
@@ -1339,16 +1190,14 @@ F:	Documentation/video4linux/bttv/
 F:	drivers/media/video/bt8xx/bttv*
 
 CACHEFILES: FS-CACHE BACKEND FOR CACHING ON MOUNTED FILESYSTEMS
-P:	David Howells
-M:	dhowells@redhat.com
+M:	David Howells <dhowells@redhat.com>
 L:	linux-cachefs@redhat.com
 S:	Supported
 F:	Documentation/filesystems/caching/cachefiles.txt
 F:	fs/cachefiles/
 
 CAFE CMOS INTEGRATED CAMERA CONTROLLER DRIVER
-P:	Jonathan Corbet
-M:	corbet@lwn.net
+M:	Jonathan Corbet <corbet@lwn.net>
 L:	linux-media@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
 S:	Maintained
@@ -1356,10 +1205,8 @@ F:	Documentation/video4linux/cafe_ccic
 F:	drivers/media/video/cafe_ccic*
 
 CALGARY x86-64 IOMMU
-P:	Muli Ben-Yehuda
-M:	muli@il.ibm.com
-P:	Jon D. Mason
-M:	jdmason@kudzu.us
+M:	Muli Ben-Yehuda <muli@il.ibm.com>
+M:	"Jon D. Mason" <jdmason@kudzu.us>
 L:	discuss@x86-64.org
 S:	Maintained
 F:	arch/x86/kernel/pci-calgary_64.c
@@ -1368,10 +1215,8 @@ F:	arch/x86/include/asm/calgary.h
 F:	arch/x86/include/asm/tce.h
 
 CAN NETWORK LAYER
-P:	Urs Thuermann
-M:	urs.thuermann@volkswagen.de
-P:	Oliver Hartkopp
-M:	oliver.hartkopp@volkswagen.de
+M:	Urs Thuermann <urs.thuermann@volkswagen.de>
+M:	Oliver Hartkopp <oliver.hartkopp@volkswagen.de>
 L:	socketcan-core@lists.berlios.de (subscribers-only)
 W:	http://developer.berlios.de/projects/socketcan/
 S:	Maintained
@@ -1380,15 +1225,13 @@ F:	include/linux/can/
 F:	include/linux/can.h
 
 CAN NETWORK DRIVERS
-P:	Wolfgang Grandegger
-M:	wg@grandegger.com
+M:	Wolfgang Grandegger <wg@grandegger.com>
 L:	socketcan-core@lists.berlios.de (subscribers-only)
 W:	http://developer.berlios.de/projects/socketcan/
 S:	Maintained
 
 CELL BROADBAND ENGINE ARCHITECTURE
-P:	Arnd Bergmann
-M:	arnd@arndb.de
+M:	Arnd Bergmann <arnd@arndb.de>
 L:	linuxppc-dev@ozlabs.org
 L:	cbe-oss-dev@ozlabs.org
 W:	http://www.ibm.com/developerworks/power/cell/
@@ -1399,8 +1242,7 @@ F:	arch/powerpc/oprofile/*cell*
 F:	arch/powerpc/platforms/cell/
 
 CERTIFIED WIRELESS USB (WUSB) SUBSYSTEM:
-P:	David Vrabel
-M:	david.vrabel@csr.com
+M:	David Vrabel <david.vrabel@csr.com>
 L:	linux-usb@vger.kernel.org
 S:	Supported
 F:	Documentation/usb/WUSB-Design-overview.txt
@@ -1409,8 +1251,7 @@ F:	drivers/usb/wusbcore/
 F:	include/linux/usb/wusb*
 
 CFAG12864B LCD DRIVER
-P:	Miguel Ojeda Sandonis
-M:	miguel.ojeda.sandonis@gmail.com
+M:	Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com>
 W:	http://miguelojeda.es/auxdisplay.htm
 W:	http://jair.lab.fi.uva.es/~migojed/auxdisplay.htm
 S:	Maintained
@@ -1418,8 +1259,7 @@ F:	drivers/auxdisplay/cfag12864b.c
 F:	include/linux/cfag12864b.h
 
 CFAG12864BFB LCD FRAMEBUFFER DRIVER
-P:	Miguel Ojeda Sandonis
-M:	miguel.ojeda.sandonis@gmail.com
+M:	Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com>
 W:	http://miguelojeda.es/auxdisplay.htm
 W:	http://jair.lab.fi.uva.es/~migojed/auxdisplay.htm
 S:	Maintained
@@ -1427,8 +1267,7 @@ F:	drivers/auxdisplay/cfag12864bfb.c
 F:	include/linux/cfag12864b.h
 
 CFG80211 and NL80211
-P:	Johannes Berg
-M:	johannes@sipsolutions.net
+M:	Johannes Berg <johannes@sipsolutions.net>
 L:	linux-wireless@vger.kernel.org
 S:	Maintained
 F:	include/linux/nl80211.h
@@ -1437,66 +1276,47 @@ F:	net/wireless/*
 X:	net/wireless/wext*
 
 CHECKPATCH
-P:	Andy Whitcroft
-M:	apw@canonical.com
+M:	Andy Whitcroft <apw@canonical.com>
 S:	Supported
 F:	scripts/checkpatch.pl
 
 CISCO 10G ETHERNET DRIVER
-P:	Scott Feldman
-M:	scofeldm@cisco.com
-P:	Joe Eykholt
-M:	jeykholt@cisco.com
+M:	Scott Feldman <scofeldm@cisco.com>
+M:	Joe Eykholt <jeykholt@cisco.com>
 S:	Supported
 F:	drivers/net/enic/
 
 CIRRUS LOGIC EP93XX ETHERNET DRIVER
-P:	Lennert Buytenhek
-M:	kernel@wantstofly.org
+M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/arm/ep93xx_eth.c
 
 CIRRUS LOGIC EP93XX OHCI USB HOST DRIVER
-P:	Lennert Buytenhek
-M:	kernel@wantstofly.org
+M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-usb@vger.kernel.org
 S:	Maintained
 F:	drivers/usb/host/ohci-ep93xx.c
 
 CIRRUS LOGIC CS4270 SOUND DRIVER
-P:	Timur Tabi
-M:	timur@freescale.com
+M:	Timur Tabi <timur@freescale.com>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 S:	Supported
 F:	sound/soc/codecs/cs4270*
 
-CIRRUS LOGIC CS4280/CS461x SOUNDDRIVER
-P:	Cirrus Logic Corporation (kernel 2.2 driver)
-M:	Cirrus Logic Corporation, Thomas Woller <twoller@crystal.cirrus.com>
-P:	Nils Faerber (port to kernel 2.4)
-M:	Nils Faerber <nils@kernelconcepts.de>
-S:	Maintained
-F:	Documentation/input/cs461x.txt
-F:	sound/pci/cs46xx/
-
 CLK API
-P:	Russell King
-M:	linux@arm.linux.org.uk
+M:	Russell King <linux@arm.linux.org.uk>
 F:	include/linux/clk.h
 
 CISCO FCOE HBA DRIVER
-P:	Abhijeet Joglekar
-M:	abjoglek@cisco.com
-P:	Joe Eykholt
-M:	jeykholt@cisco.com
+M:	Abhijeet Joglekar <abjoglek@cisco.com>
+M:	Joe Eykholt <jeykholt@cisco.com>
 L:	linux-scsi@vger.kernel.org
 S:	Supported
 F:	drivers/scsi/fnic/
 
 CODA FILE SYSTEM
-P:	Jan Harkes
-M:	jaharkes@cs.cmu.edu
+M:	Jan Harkes <jaharkes@cs.cmu.edu>
 M:	coda@cs.cmu.edu
 L:	codalist@coda.cs.cmu.edu
 W:	http://www.coda.cs.cmu.edu/
@@ -1506,8 +1326,7 @@ F:	fs/coda/
 F:	include/linux/coda*.h
 
 COMMON INTERNET FILE SYSTEM (CIFS)
-P:	Steve French
-M:	sfrench@samba.org
+M:	Steve French <sfrench@samba.org>
 L:	linux-cifs-client@lists.samba.org
 L:	samba-technical@lists.samba.org
 W:	http://linux-cifs.samba.org/
@@ -1517,63 +1336,57 @@ F:	Documentation/filesystems/cifs.txt
 F:	fs/cifs/
 
 COMPACTPCI HOTPLUG CORE
-P:	Scott Murray
-M:	scottm@somanetworks.com
-M:	scott@spiteful.org
+M:	Scott Murray <scott@spiteful.org>
 L:	linux-pci@vger.kernel.org
-S:	Supported
+S:	Maintained
 F:	drivers/pci/hotplug/cpci_hotplug*
 
 COMPACTPCI HOTPLUG ZIATECH ZT5550 DRIVER
-P:	Scott Murray
-M:	scottm@somanetworks.com
-M:	scott@spiteful.org
+M:	Scott Murray <scott@spiteful.org>
 L:	linux-pci@vger.kernel.org
-S:	Supported
+S:	Maintained
 F:	drivers/pci/hotplug/cpcihp_zt5550.*
 
 COMPACTPCI HOTPLUG GENERIC DRIVER
-P:	Scott Murray
-M:	scottm@somanetworks.com
-M:	scott@spiteful.org
+M:	Scott Murray <scott@spiteful.org>
 L:	linux-pci@vger.kernel.org
-S:	Supported
+S:	Maintained
 F:	drivers/pci/hotplug/cpcihp_generic.c
 
 COMPAL LAPTOP SUPPORT
-P:	Cezary Jackiewicz
-M:	cezary.jackiewicz@gmail.com
+M:	Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
 S:	Maintained
 F:	drivers/platform/x86/compal-laptop.c
 
 COMPUTONE INTELLIPORT MULTIPORT CARD
-P:	Michael H. Warfield
-M:	mhw@wittsend.com
+M:	"Michael H. Warfield" <mhw@wittsend.com>
 W:	http://www.wittsend.com/computone.html
 S:	Maintained
 F:	Documentation/serial/computone.txt
 F:	drivers/char/ip2/
 
 CONEXANT ACCESSRUNNER USB DRIVER
-P:	Simon Arlott
-M:	cxacru@fire.lp0.eu
+M:	Simon Arlott <cxacru@fire.lp0.eu>
 L:	accessrunner-general@lists.sourceforge.net
 W:	http://accessrunner.sourceforge.net/
 S:	Maintained
 F:	drivers/usb/atm/cxacru.c
 
 CONFIGFS
-P:	Joel Becker
-M:	joel.becker@oracle.com
+M:	Joel Becker <joel.becker@oracle.com>
 S:	Supported
 F:	fs/configfs/
 F:	include/linux/configfs.h
 
+CONNECTOR
+M:	Evgeniy Polyakov <zbr@ioremap.net>
+L:	netdev@vger.kernel.org
+S:	Maintained
+F:	drivers/connector/
+
 CONTROL GROUPS (CGROUPS)
-P:	Paul Menage
-M:	menage@google.com
-P:	Li Zefan
-M:	lizf@cn.fujitsu.com
+M:	Paul Menage <menage@google.com>
+M:	Li Zefan <lizf@cn.fujitsu.com>
 L:	containers@lists.linux-foundation.org
 S:	Maintained
 F:	include/linux/cgroup*
@@ -1581,30 +1394,26 @@ F:	kernel/cgroup*
 F:	mm/*cgroup*
 
 CORETEMP HARDWARE MONITORING DRIVER
-P:	Rudolf Marek
-M:	r.marek@assembler.cz
+M:	Rudolf Marek <r.marek@assembler.cz>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	Documentation/hwmon/coretemp
 F:	drivers/hwmon/coretemp.c
 
 COSA/SRP SYNC SERIAL DRIVER
-P:	Jan "Yenya" Kasprzak
-M:	kas@fi.muni.cz
+M:	Jan "Yenya" Kasprzak <kas@fi.muni.cz>
 W:	http://www.fi.muni.cz/~kas/cosa/
 S:	Maintained
 F:	drivers/net/wan/cosa*
 
 CPMAC ETHERNET DRIVER
-P:	Florian Fainelli
-M:	florian@openwrt.org
+M:	Florian Fainelli <florian@openwrt.org>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/cpmac.c
 
 CPU FREQUENCY DRIVERS
-P:	Dave Jones
-M:	davej@redhat.com
+M:	Dave Jones <davej@redhat.com>
 L:	cpufreq@vger.kernel.org
 W:	http://www.codemonkey.org.uk/projects/cpufreq/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq.git
@@ -1614,15 +1423,13 @@ F:	drivers/cpufreq/
 F:	include/linux/cpufreq.h
 
 CPUID/MSR DRIVER
-P:	H. Peter Anvin
-M:	hpa@zytor.com
+M:	"H. Peter Anvin" <hpa@zytor.com>
 S:	Maintained
 F:	arch/x86/kernel/cpuid.c
 F:	arch/x86/kernel/msr.c
 
 CPUSETS
-P:	Paul Menage
-M:	menage@google.com
+M:	Paul Menage <menage@google.com>
 W:	http://www.bullopensource.org/cpuset/
 W:	http://oss.sgi.com/projects/cpusets/
 S:	Supported
@@ -1637,20 +1444,16 @@ F:	Documentation/filesystems/cramfs.txt
 F:	fs/cramfs/
 
 CRIS PORT
-P:	Mikael Starvik
-M:	starvik@axis.com
-P:	Jesper Nilsson
-M:	jesper.nilsson@axis.com
+M:	Mikael Starvik <starvik@axis.com>
+M:	Jesper Nilsson <jesper.nilsson@axis.com>
 L:	linux-cris-kernel@axis.com
 W:	http://developer.axis.com
 S:	Maintained
 F:	arch/cris/
 
 CRYPTO API
-P:	Herbert Xu
-M:	herbert@gondor.apana.org.au
-P:	David S. Miller
-M:	davem@davemloft.net
+M:	Herbert Xu <herbert@gondor.apana.org.au>
+M:	"David S. Miller" <davem@davemloft.net>
 L:	linux-crypto@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6.git
 S:	Maintained
@@ -1661,58 +1464,50 @@ F:	drivers/crypto/
 F:	include/crypto/
 
 CRYPTOGRAPHIC RANDOM NUMBER GENERATOR
-P:	Neil Horman
-M:	nhorman@tuxdriver.com
+M:	Neil Horman <nhorman@tuxdriver.com>
 L:	linux-crypto@vger.kernel.org
 S:	Maintained
 
 CS5535 Audio ALSA driver
-P:	Jaya Kumar
-M:	jayakumar.alsa@gmail.com
+M:	Jaya Kumar <jayakumar.alsa@gmail.com>
 S:	Maintained
 F:	sound/pci/cs5535audio/
 
 CX18 VIDEO4LINUX DRIVER
-P:	Hans Verkuil
-M:	hverkuil@xs4all.nl
-P:	Andy Walls
-M:	awalls@radix.net
+M:	Hans Verkuil <hverkuil@xs4all.nl>
+M:	Andy Walls <awalls@radix.net>
 L:	ivtv-devel@ivtvdriver.org
-L:	ivtv-users@ivtvdriver.org
 L:	linux-media@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
 W:	http://linuxtv.org
+W:	http://www.ivtvdriver.org/index.php/Cx18
 S:	Maintained
 F:	Documentation/video4linux/cx18.txt
 F:	drivers/media/video/cx18/
 
 CXGB3 ETHERNET DRIVER (CXGB3)
-P:	Divy Le Ray
-M:	divy@chelsio.com
+M:	Divy Le Ray <divy@chelsio.com>
 L:	netdev@vger.kernel.org
 W:	http://www.chelsio.com
 S:	Supported
 F:	drivers/net/cxgb3/
 
 CXGB3 IWARP RNIC DRIVER (IW_CXGB3)
-P:	Steve Wise
-M:	swise@chelsio.com
+M:	Steve Wise <swise@chelsio.com>
 L:	general@lists.openfabrics.org
 W:	http://www.openfabrics.org
 S:	Supported
 F:	drivers/infiniband/hw/cxgb3/
 
 CYBERPRO FB DRIVER
-P:	Russell King
-M:	linux@arm.linux.org.uk
+M:	Russell King <linux@arm.linux.org.uk>
 L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
 W:	http://www.arm.linux.org.uk/
 S:	Maintained
 F:	drivers/video/cyber2000fb.*
 
 CYCLADES 2X SYNC CARD DRIVER
-P:	Arnaldo Carvalho de Melo
-M:	acme@ghostprotocols.net
+M:	Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
 W:	http://oops.ghostprotocols.net:81/blog
 S:	Maintained
 F:	drivers/net/wan/cycx*
@@ -1729,8 +1524,7 @@ S:	Orphan
 F:	drivers/net/wan/pc300*
 
 DAMA SLAVE for AX.25
-P:	Joerg Reuter
-M:	jreuter@yaina.de
+M:	Joerg Reuter <jreuter@yaina.de>
 W:	http://yaina.de/jreuter/
 W:	http://www.qsl.net/dl1bke/
 L:	linux-hams@vger.kernel.org
@@ -1744,29 +1538,23 @@ F:	net/ax25/ax25_timer.c
 F:	net/ax25/sysctl_net_ax25.c
 
 DAVICOM FAST ETHERNET (DMFE) NETWORK DRIVER
-P:	Tobias Ringstrom
-M:	tori@unhappy.mine.nu
+M:	Tobias Ringstrom <tori@unhappy.mine.nu>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	Documentation/networking/dmfe.txt
 F:	drivers/net/tulip/dmfe.c
 
 DC390/AM53C974 SCSI driver
-P:	Kurt Garloff
-M:	garloff@suse.de
+M:	Kurt Garloff <garloff@suse.de>
 W:	http://www.garloff.de/kurt/linux/dc390/
-P:	Guennadi Liakhovetski
-M:	g.liakhovetski@gmx.de
+M:	Guennadi Liakhovetski <g.liakhovetski@gmx.de>
 S:	Maintained
 F:	drivers/scsi/tmscsim.*
 
 DC395x SCSI driver
-P:	Oliver Neukum
-M:	oliver@neukum.name
-P:	Ali Akcaagac
-M:	aliakc@web.de
-P:	Jamie Lenehan
-M:	lenehan@twibble.org
+M:	Oliver Neukum <oliver@neukum.name>
+M:	Ali Akcaagac <aliakc@web.de>
+M:	Jamie Lenehan <lenehan@twibble.org>
 W:	http://twibble.org/dist/dc395x/
 L:	dc395x@twibble.org
 L:	http://lists.twibble.org/mailman/listinfo/dc395x/
@@ -1775,8 +1563,7 @@ F:	Documentation/scsi/dc395x.txt
 F:	drivers/scsi/dc395x.*
 
 DCCP PROTOCOL
-P:	Arnaldo Carvalho de Melo
-M:	acme@ghostprotocols.net
+M:	Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
 L:	dccp@vger.kernel.org
 W:	http://linux-net.osdl.org/index.php/DCCP
 S:	Maintained
@@ -1785,8 +1572,7 @@ F:	include/linux/tfrc.h
 F:	net/dccp/
 
 DECnet NETWORK LAYER
-P:	Christine Caulfield
-M:	christine.caulfield@googlemail.com
+M:	Christine Caulfield <christine.caulfield@googlemail.com>
 W:	http://linux-decnet.sourceforge.net
 L:	linux-decnet-user@lists.sourceforge.net
 S:	Maintained
@@ -1794,40 +1580,34 @@ F:	Documentation/networking/decnet.txt
 F:	net/decnet/
 
 DEFXX FDDI NETWORK DRIVER
-P:	Maciej W. Rozycki
-M:	macro@linux-mips.org
+M:	"Maciej W. Rozycki" <macro@linux-mips.org>
 S:	Maintained
 F:	drivers/net/defxx.*
 
 DELL LAPTOP DRIVER
-P:	Matthew Garrett
-M:	mjg59@srcf.ucam.org
+M:	Matthew Garrett <mjg59@srcf.ucam.org>
 S:	Maintained
 F:	drivers/platform/x86/dell-laptop.c
 
 DELL LAPTOP SMM DRIVER
-P:	Massimo Dal Zotto
-M:	dz@debian.org
+M:	Massimo Dal Zotto <dz@debian.org>
 W:	http://www.debian.org/~dz/i8k/
 S:	Maintained
 F:	drivers/char/i8k.c
 F:	include/linux/i8k.h
 
 DELL SYSTEMS MANAGEMENT BASE DRIVER (dcdbas)
-P:	Doug Warzecha
-M:	Douglas_Warzecha@dell.com
+M:	Doug Warzecha <Douglas_Warzecha@dell.com>
 S:	Maintained
 F:	Documentation/dcdbas.txt
 F:	drivers/firmware/dcdbas.*
 
 DELL WMI EXTRAS DRIVER
-P:	Matthew Garrett
-M:	mjg59@srcf.ucam.org
+M:	Matthew Garrett <mjg59@srcf.ucam.org>
 S:	Maintained
 
 DEVICE NUMBER REGISTRY
-P:	Torben Mathiasen
-M:	device@lanana.org
+M:	Torben Mathiasen <device@lanana.org>
 W:	http://lanana.org/docs/device-list/index.html
 S:	Maintained
 
@@ -1842,8 +1622,7 @@ F:	include/linux/device-mapper.h
 F:	include/linux/dm-*.h
 
 DIGI INTL. EPCA DRIVER
-P:	Digi International, Inc
-M:	Eng.Linux@digi.com
+M:	"Digi International, Inc" <Eng.Linux@digi.com>
 L:	Eng.Linux@digi.com
 W:	http://www.digi.com
 S:	Orphan
@@ -1852,34 +1631,29 @@ F:	drivers/char/epca*
 F:	drivers/char/digi*
 
 DIRECTORY NOTIFICATION (DNOTIFY)
-P:	Eric Paris
-M:	eparis@parisplace.org
+M:	Eric Paris <eparis@parisplace.org>
 S:	Maintained
 F:	Documentation/filesystems/dnotify.txt
 F:	fs/notify/dnotify/
 F:	include/linux/dnotify.h
 
 DISK GEOMETRY AND PARTITION HANDLING
-P:	Andries Brouwer
-M:	aeb@cwi.nl
+M:	Andries Brouwer <aeb@cwi.nl>
 W:	http://www.win.tue.nl/~aeb/linux/Large-Disk.html
 W:	http://www.win.tue.nl/~aeb/linux/zip/zip-1.html
 W:	http://www.win.tue.nl/~aeb/partitions/partition_types-1.html
 S:	Maintained
 
 DISKQUOTA
-P:	Jan Kara
-M:	jack@suse.cz
+M:	Jan Kara <jack@suse.cz>
 S:	Maintained
 F:	Documentation/filesystems/quota.txt
 F:	fs/quota/
 F:	include/linux/quota*.h
 
 DISTRIBUTED LOCK MANAGER (DLM)
-P:	Christine Caulfield
-M:	ccaulfie@redhat.com
-P:	David Teigland
-M:	teigland@redhat.com
+M:	Christine Caulfield <ccaulfie@redhat.com>
+M:	David Teigland <teigland@redhat.com>
 L:	cluster-devel@redhat.com
 W:	http://sources.redhat.com/cluster/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm.git
@@ -1887,52 +1661,44 @@ S:	Supported
 F:	fs/dlm/
 
 DMA GENERIC OFFLOAD ENGINE SUBSYSTEM
-P:	Maciej Sosnowski
-M:	maciej.sosnowski@intel.com
-P:	Dan Williams
-M:	dan.j.williams@intel.com
+M:	Maciej Sosnowski <maciej.sosnowski@intel.com>
+M:	Dan Williams <dan.j.williams@intel.com>
 S:	Supported
 F:	drivers/dma/
 F:	include/linux/dma*
 
 DME1737 HARDWARE MONITOR DRIVER
-P:	Juerg Haefliger
-M:	juergh@gmail.com
+M:	Juerg Haefliger <juergh@gmail.com>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	Documentation/hwmon/dme1737
 F:	drivers/hwmon/dme1737.c
 
 DOCBOOK FOR DOCUMENTATION
-P:	Randy Dunlap
-M:	rdunlap@xenotime.net
+M:	Randy Dunlap <rdunlap@xenotime.net>
 S:	Maintained
 
 DOCKING STATION DRIVER
-P:	Shaohua Li
-M:	shaohua.li@intel.com
+M:	Shaohua Li <shaohua.li@intel.com>
 L:	linux-acpi@vger.kernel.org
 S:	Supported
 F:	drivers/acpi/dock.c
 
 DOCUMENTATION
-P:	Randy Dunlap
-M:	rdunlap@xenotime.net
+M:	Randy Dunlap <rdunlap@xenotime.net>
 L:	linux-doc@vger.kernel.org
 S:	Maintained
 F:	Documentation/
 
 DOUBLETALK DRIVER
-P:	James R. Van Zandt
-M:	jrv@vanzandt.mv.com
+M:	"James R. Van Zandt" <jrv@vanzandt.mv.com>
 L:	blinux-list@redhat.com
 S:	Maintained
 F:	drivers/char/dtlk.c
 F:	include/linux/dtlk.h
 
 DPT_I2O SCSI RAID DRIVER
-P:	Adaptec OEM Raid Solutions
-M:	aacraid@adaptec.com
+M:	Adaptec OEM Raid Solutions <aacraid@adaptec.com>
 L:	linux-scsi@vger.kernel.org
 W:	http://www.adaptec.com/
 S:	Maintained
@@ -1940,8 +1706,7 @@ F:	drivers/scsi/dpt*
 F:	drivers/scsi/dpt/
 
 DRIVER CORE, KOBJECTS, AND SYSFS
-P:	Greg Kroah-Hartman
-M:	gregkh@suse.de
+M:	Greg Kroah-Hartman <gregkh@suse.de>
 T:	quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
 S:	Supported
 F:	Documentation/kobject.txt
@@ -1951,52 +1716,45 @@ F:	include/linux/kobj*
 F:	lib/kobj*
 
 DRM DRIVERS
-P:	David Airlie
-M:	airlied@linux.ie
+M:	David Airlie <airlied@linux.ie>
 L:	dri-devel@lists.sourceforge.net
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6.git
 S:	Maintained
 F:	drivers/gpu/drm/
 
 DSCC4 DRIVER
-P:	Francois Romieu
-M:	romieu@fr.zoreil.com
+M:	Francois Romieu <romieu@fr.zoreil.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/wan/dscc4.c
 
 DZ DECSTATION DZ11 SERIAL DRIVER
-P:	Maciej W. Rozycki
-M:	macro@linux-mips.org
+M:	"Maciej W. Rozycki" <macro@linux-mips.org>
 S:	Maintained
 F:	drivers/serial/dz.*
 
 EATA-DMA SCSI DRIVER
-P:	Michael Neuffer
-M:	mike@i-Connect.Net
+M:	Michael Neuffer <mike@i-Connect.Net>
 L:	linux-eata@i-connect.net
 L:	linux-scsi@vger.kernel.org
 S:	Maintained
 F:	drivers/scsi/eata*
 
 EATA ISA/EISA/PCI SCSI DRIVER
-P:	Dario Ballabio
-M:	ballabio_dario@emc.com
+M:	Dario Ballabio <ballabio_dario@emc.com>
 L:	linux-scsi@vger.kernel.org
 S:	Maintained
 F:	drivers/scsi/eata.c
 
 EATA-PIO SCSI DRIVER
-P:	Michael Neuffer
-M:	mike@i-Connect.Net
+M:	Michael Neuffer <mike@i-Connect.Net>
 L:	linux-eata@i-connect.net
 L:	linux-scsi@vger.kernel.org
 S:	Maintained
 F:	drivers/scsi/eata_pio.*
 
 EBTABLES
-P:	Bart De Schuymer
-M:	bart.de.schuymer@pandora.be
+M:	Bart De Schuymer <bart.de.schuymer@pandora.be>
 L:	ebtables-user@lists.sourceforge.net
 L:	ebtables-devel@lists.sourceforge.net
 W:	http://ebtables.sourceforge.net/
@@ -2005,10 +1763,8 @@ F:	include/linux/netfilter_bridge/ebt_*.h
 F:	net/bridge/netfilter/ebt*.c
 
 ECRYPT FILE SYSTEM
-P:	Tyler Hicks
-M:	tyhicks@linux.vnet.ibm.com
-P:	Dustin Kirkland
-M:	kirkland@canonical.com
+M:	Tyler Hicks <tyhicks@linux.vnet.ibm.com>
+M:	Dustin Kirkland <kirkland@canonical.com>
 L:	ecryptfs-devel@lists.launchpad.net
 W:	https://launchpad.net/ecryptfs
 S:	Supported
@@ -2016,8 +1772,7 @@ F:	Documentation/filesystems/ecryptfs.txt
 F:	fs/ecryptfs/
 
 EDAC-CORE
-P:	Doug Thompson
-M:	dougthompson@xmission.com
+M:	Doug Thompson <dougthompson@xmission.com>
 L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:	bluesmoke.sourceforge.net
 S:	Supported
@@ -2026,94 +1781,80 @@ F:	drivers/edac/edac_*
 F:	include/linux/edac.h
 
 EDAC-AMD64
-P:	Doug Thompson
-M:	dougthompson@xmission.com
-P:	Borislav Petkov
-M:	borislav.petkov@amd.com
+M:	Doug Thompson <dougthompson@xmission.com>
+M:	Borislav Petkov <borislav.petkov@amd.com>
 L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:	bluesmoke.sourceforge.net
 S:	Supported
 F:	drivers/edac/amd64_edac*
 
 EDAC-E752X
-P:	Mark Gross
-M:	mark.gross@intel.com
-P:	Doug Thompson
-M:	dougthompson@xmission.com
+M:	Mark Gross <mark.gross@intel.com>
+M:	Doug Thompson <dougthompson@xmission.com>
 L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:	bluesmoke.sourceforge.net
 S:	Maintained
 F:	drivers/edac/e752x_edac.c
 
 EDAC-E7XXX
-P:	Doug Thompson
-M:	dougthompson@xmission.com
+M:	Doug Thompson <dougthompson@xmission.com>
 L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:	bluesmoke.sourceforge.net
 S:	Maintained
 F:	drivers/edac/e7xxx_edac.c
 
 EDAC-I82443BXGX
-P:	Tim Small
-M:	tim@buttersideup.com
+M:	Tim Small <tim@buttersideup.com>
 L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:	bluesmoke.sourceforge.net
 S:	Maintained
 F:	drivers/edac/i82443bxgx_edac.c
 
 EDAC-I3000
-P:	Jason Uhlenkott
-M:	juhlenko@akamai.com
+M:	Jason Uhlenkott <juhlenko@akamai.com>
 L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:	bluesmoke.sourceforge.net
 S:	Maintained
 F:	drivers/edac/i3000_edac.c
 
 EDAC-I5000
-P:	Doug Thompson
-M:	dougthompson@xmission.com
+M:	Doug Thompson <dougthompson@xmission.com>
 L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:	bluesmoke.sourceforge.net
 S:	Maintained
 F:	drivers/edac/i5000_edac.c
 
 EDAC-I5400
-P:	Mauro Carvalho Chehab
-M:	mchehab@redhat.com
+M:	Mauro Carvalho Chehab <mchehab@redhat.com>
 L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:	bluesmoke.sourceforge.net
 S:	Maintained
 F:	drivers/edac/i5400_edac.c
 
 EDAC-I82975X
-P:	Ranganathan Desikan
-M:	rdesikan@jetzbroadband.com
-P:	Arvind R.
-M:	arvind@acarlab.com
+M:	Ranganathan Desikan <ravi@jetztechnologies.com>
+M:	"Arvind R." <arvind@jetztechnologies.com>
 L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:	bluesmoke.sourceforge.net
 S:	Maintained
 F:	drivers/edac/i82975x_edac.c
 
 EDAC-PASEMI
-P:	Egor Martovetsky
-M:	egor@pasemi.com
+M:	Egor Martovetsky <egor@pasemi.com>
 L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:	bluesmoke.sourceforge.net
 S:	Maintained
 F:	drivers/edac/pasemi_edac.c
 
 EDAC-R82600
-P:	Tim Small
-M:	tim@buttersideup.com
+M:	Tim Small <tim@buttersideup.com>
 L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:	bluesmoke.sourceforge.net
 S:	Maintained
 F:	drivers/edac/r82600_edac.c
 
 EEEPC LAPTOP EXTRAS DRIVER
-P:	Corentin Chary
-M:	corentincj@iksaif.net
+M:	Corentin Chary <corentincj@iksaif.net>
 L:	acpi4asus-user@lists.sourceforge.net
 W:	http://acpi4asus.sf.net
 S:	Maintained
@@ -2125,66 +1866,54 @@ S:	Orphan
 F:	fs/efs/
 
 EHCA (IBM GX bus InfiniBand adapter) DRIVER
-P:	Hoang-Nam Nguyen
-M:	hnguyen@de.ibm.com
-P:	Christoph Raisch
-M:	raisch@de.ibm.com
+M:	Hoang-Nam Nguyen <hnguyen@de.ibm.com>
+M:	Christoph Raisch <raisch@de.ibm.com>
 L:	general@lists.openfabrics.org
 S:	Supported
 F:	drivers/infiniband/hw/ehca/
 
 EMBEDDED LINUX
-P:	Paul Gortmaker
-M:	paul.gortmaker@windriver.com
-P:	Matt Mackall
-M:	mpm@selenic.com
-P:	David Woodhouse
-M:	dwmw2@infradead.org
+M:	Paul Gortmaker <paul.gortmaker@windriver.com>
+M:	Matt Mackall <mpm@selenic.com>
+M:	David Woodhouse <dwmw2@infradead.org>
 L:	linux-embedded@vger.kernel.org
 S:	Maintained
 
 EMULEX LPFC FC SCSI DRIVER
-P:	James Smart
-M:	james.smart@emulex.com
+M:	James Smart <james.smart@emulex.com>
 L:	linux-scsi@vger.kernel.org
 W:	http://sourceforge.net/projects/lpfcxxxx
 S:	Supported
 F:	drivers/scsi/lpfc/
 
 ENE CB710 FLASH CARD READER DRIVER
-P:	Michał Mirosław
-M:	mirq-linux@rere.qmqm.pl
-L:	linux-kernel@vger.kernel.org
+M:	Michał Mirosław <mirq-linux@rere.qmqm.pl>
 S:	Maintained
 F:	drivers/misc/cb710/
 F:	drivers/mmc/host/cb710-mmc.*
 F:	include/linux/cb710.h
 
 EPSON 1355 FRAMEBUFFER DRIVER
-P:	Christopher Hoover
-M:	ch@murgatroid.com
-P:	Christopher Hoover
-M:	ch@hpl.hp.com
+M:	Christopher Hoover <ch@murgatroid.com>
+M:	Christopher Hoover <ch@hpl.hp.com>
 S:	Maintained
 F:	drivers/video/epson1355fb.c
 
 EPSON S1D13XXX FRAMEBUFFER DRIVER
-P:	Kristoffer Ericson
-M:	kristoffer.ericson@gmail.com
+M:	Kristoffer Ericson <kristoffer.ericson@gmail.com>
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kristoffer/linux-hpc.git
 F:	drivers/video/s1d13xxxfb.c
 F:	include/video/s1d13xxxfb.h
 
 ETHEREXPRESS-16 NETWORK DRIVER
-P:	Philip Blundell
-M:	philb@gnu.org
+M:	Philip Blundell <philb@gnu.org>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/eexpress.*
 
 ETHERNET BRIDGE
-P:	Stephen Hemminger
-M:	shemminger@linux-foundation.org
+M:	Stephen Hemminger <shemminger@linux-foundation.org>
 L:	bridge@lists.linux-foundation.org
 W:	http://www.linux-foundation.org/en/Net:Bridge
 S:	Maintained
@@ -2192,8 +1921,7 @@ F:	include/linux/netfilter_bridge/
 F:	net/bridge/
 
 ETHERTEAM 16I DRIVER
-P:	Mika Kuoppala
-M:	miku@iki.fi
+M:	Mika Kuoppala <miku@iki.fi>
 S:	Maintained
 F:	drivers/net/eth16i.c
 
@@ -2205,12 +1933,9 @@ F:	fs/ext2/
 F:	include/linux/ext2*
 
 EXT3 FILE SYSTEM
-P:	Stephen Tweedie
-M:	sct@redhat.com
-P:	Andrew Morton
-M:	akpm@linux-foundation.org
-P:	Andreas Dilger
-M:	adilger@sun.com
+M:	Stephen Tweedie <sct@redhat.com>
+M:	Andrew Morton <akpm@linux-foundation.org>
+M:	Andreas Dilger <adilger@sun.com>
 L:	linux-ext4@vger.kernel.org
 S:	Maintained
 F:	Documentation/filesystems/ext3.txt
@@ -2218,10 +1943,8 @@ F:	fs/ext3/
 F:	include/linux/ext3*
 
 EXT4 FILE SYSTEM
-P:	Theodore Ts'o
-M:	tytso@mit.edu
-P:	Andreas Dilger
-M:	adilger@sun.com
+M:	"Theodore Ts'o" <tytso@mit.edu>
+M:	Andreas Dilger <adilger@sun.com>
 L:	linux-ext4@vger.kernel.org
 W:	http://ext4.wiki.kernel.org
 S:	Maintained
@@ -2229,30 +1952,26 @@ F:	Documentation/filesystems/ext4.txt
 F:	fs/ext4/
 
 F71805F HARDWARE MONITORING DRIVER
-P:	Jean Delvare
-M:	khali@linux-fr.org
+M:	Jean Delvare <khali@linux-fr.org>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	Documentation/hwmon/f71805f
 F:	drivers/hwmon/f71805f.c
 
 FARSYNC SYNCHRONOUS DRIVER
-P:	Kevin Curtis
-M:	kevin.curtis@farsite.co.uk
+M:	Kevin Curtis <kevin.curtis@farsite.co.uk>
 W:	http://www.farsite.co.uk/
 S:	Supported
 F:	drivers/net/wan/farsync.*
 
 FAULT INJECTION SUPPORT
-P:	Akinobu Mita
-M:	akinobu.mita@gmail.com
+M:	Akinobu Mita <akinobu.mita@gmail.com>
 S:	Supported
 F:	Documentation/fault-injection/
 F:	lib/fault-inject.c
 
 FILE LOCKING (flock() and fcntl()/lockf())
-P:	Matthew Wilcox
-M:	matthew@wil.cx
+M:	Matthew Wilcox <matthew@wil.cx>
 L:	linux-fsdevel@vger.kernel.org
 S:	Maintained
 F:	include/linux/fcntl.h
@@ -2261,25 +1980,21 @@ F:	fs/fcntl.c
 F:	fs/locks.c
 
 FILESYSTEMS (VFS and infrastructure)
-P:	Alexander Viro
-M:	viro@zeniv.linux.org.uk
+M:	Alexander Viro <viro@zeniv.linux.org.uk>
 L:	linux-fsdevel@vger.kernel.org
 S:	Maintained
 F:	fs/*
 
 FINTEK F75375S HARDWARE MONITOR AND FAN CONTROLLER DRIVER
-P:	Riku Voipio
-M:	riku.vipio@iki.fi
+M:	Riku Voipio <riku.vipio@iki.fi>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	drivers/hwmon/f75375s.c
 F:	include/linux/f75375s.h
 
 FIREWIRE SUBSYSTEM
-P:	Kristian Hoegsberg
-M:	krh@redhat.com
-P:	Stefan Richter
-M:	stefanr@s5r6.in-berlin.de
+M:	Kristian Hoegsberg <krh@redhat.com>
+M:	Stefan Richter <stefanr@s5r6.in-berlin.de>
 L:	linux1394-devel@lists.sourceforge.net
 W:	http://www.linux1394.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6.git
@@ -2294,15 +2009,13 @@ F:	drivers/base/firmware*.c
 F:	include/linux/firmware.h
 
 FPU EMULATOR
-P:	Bill Metzenthen
-M:	billm@melbpc.org.au
+M:	Bill Metzenthen <billm@melbpc.org.au>
 W:	http://floatingpoint.sourceforge.net/emulator/index.html
 S:	Maintained
 F:	arch/x86/math-emu/
 
 FRAME RELAY DLCI/FRAD (Sangoma drivers too)
-P:	Mike McLagan
-M:	mike.mclagan@linux.org
+M:	Mike McLagan <mike.mclagan@linux.org>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/wan/dlci.c
@@ -2317,25 +2030,21 @@ F:	drivers/video/fb*
 F:	include/linux/fb.h
 
 FREESCALE DMA DRIVER
-P:	Li Yang
-M:	leoli@freescale.com
-P:	Zhang Wei
-M:	zw@zh-kernel.org
+M:	Li Yang <leoli@freescale.com>
+M:	Zhang Wei <zw@zh-kernel.org>
 L:	linuxppc-dev@ozlabs.org
 S:	Maintained
 F:	drivers/dma/fsldma.*
 
 FREESCALE I2C CPM DRIVER
-P:	Jochen Friedrich
-M:	jochen@scram.de
+M:	Jochen Friedrich <jochen@scram.de>
 L:	linuxppc-dev@ozlabs.org
 L:	linux-i2c@vger.kernel.org
 S:	Maintained
 F:	drivers/i2c/busses/i2c-cpm.c
 
 FREESCALE IMX / MXC FRAMEBUFFER DRIVER
-P:	Sascha Hauer
-M:	kernel@pengutronix.de
+M:	Sascha Hauer <kernel@pengutronix.de>
 L:	linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
@@ -2343,10 +2052,8 @@ F:	arch/arm/plat-mxc/include/mach/imxfb.h
 F:	drivers/video/imxfb.c
 
 FREESCALE SOC FS_ENET DRIVER
-P:	Pantelis Antoniou
-M:	pantelis.antoniou@gmail.com
-P:	Vitaly Bordug
-M:	vbordug@ru.mvista.com
+M:	Pantelis Antoniou <pantelis.antoniou@gmail.com>
+M:	Vitaly Bordug <vbordug@ru.mvista.com>
 L:	linuxppc-dev@ozlabs.org
 L:	netdev@vger.kernel.org
 S:	Maintained
@@ -2354,39 +2061,34 @@ F:	drivers/net/fs_enet/
 F:	include/linux/fs_enet_pd.h
 
 FREESCALE QUICC ENGINE LIBRARY
-P:	Timur Tabi
-M:	timur@freescale.com
+M:	Timur Tabi <timur@freescale.com>
 L:	linuxppc-dev@ozlabs.org
 S:	Supported
 F:	arch/powerpc/sysdev/qe_lib/
 F:	arch/powerpc/include/asm/*qe.h
 
 FREESCALE HIGHSPEED USB DEVICE DRIVER
-P:	Li Yang
-M:	leoli@freescale.com
+M:	Li Yang <leoli@freescale.com>
 L:	linux-usb@vger.kernel.org
 L:	linuxppc-dev@ozlabs.org
 S:	Maintained
 F:	drivers/usb/gadget/fsl_usb2_udc.c
 
 FREESCALE QUICC ENGINE UCC ETHERNET DRIVER
-P:	Li Yang
-M:	leoli@freescale.com
+M:	Li Yang <leoli@freescale.com>
 L:	netdev@vger.kernel.org
 L:	linuxppc-dev@ozlabs.org
 S:	Maintained
 F:	drivers/net/ucc_geth*
 
 FREESCALE QUICC ENGINE UCC UART DRIVER
-P:	Timur Tabi
-M:	timur@freescale.com
+M:	Timur Tabi <timur@freescale.com>
 L:	linuxppc-dev@ozlabs.org
 S:	Supported
 F:	drivers/serial/ucc_uart.c
 
 FREESCALE SOC SOUND DRIVERS
-P:	Timur Tabi
-M:	timur@freescale.com
+M:	Timur Tabi <timur@freescale.com>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 L:	linuxppc-dev@ozlabs.org
 S:	Supported
@@ -2394,17 +2096,14 @@ F:	sound/soc/fsl/fsl*
 F:	sound/soc/fsl/mpc8610_hpcd.c
 
 FREEVXFS FILESYSTEM
-P:	Christoph Hellwig
-M:	hch@infradead.org
+M:	Christoph Hellwig <hch@infradead.org>
 W:	ftp://ftp.openlinux.org/pub/people/hch/vxfs
 S:	Maintained
 F:	fs/freevxfs/
 
 FREEZER
-P:	Pavel Machek
-M:	pavel@ucw.cz
-P:	Rafael J. Wysocki
-M:	rjw@sisk.pl
+M:	Pavel Machek <pavel@ucw.cz>
+M:	"Rafael J. Wysocki" <rjw@sisk.pl>
 L:	linux-pm@lists.linux-foundation.org
 S:	Supported
 F:	Documentation/power/freezing-of-tasks.txt
@@ -2412,8 +2111,7 @@ F:	include/linux/freezer.h
 F:	kernel/freezer.c
 
 FS-CACHE: LOCAL CACHING FOR NETWORK FILESYSTEMS
-P:	David Howells
-M:	dhowells@redhat.com
+M:	David Howells <dhowells@redhat.com>
 L:	linux-cachefs@redhat.com
 S:	Supported
 F:	Documentation/filesystems/caching/
@@ -2421,8 +2119,7 @@ F:	fs/fscache/
 F:	include/linux/fscache*.h
 
 FTRACE
-P:	Steven Rostedt
-M:	rostedt@goodmis.org
+M:	Steven Rostedt <rostedt@goodmis.org>
 S:	Maintained
 F:	Documentation/trace/ftrace.txt
 F:	arch/*/*/*/ftrace.h
@@ -2431,21 +2128,18 @@ F:	include/*/ftrace.h
 F:	kernel/trace/
 
 FUJITSU FR-V (FRV) PORT
-P:	David Howells
-M:	dhowells@redhat.com
+M:	David Howells <dhowells@redhat.com>
 S:	Maintained
 F:	arch/frv/
 
 FUJITSU LAPTOP EXTRAS
-P:	Jonathan Woithe
-M:	jwoithe@physics.adelaide.edu.au
+M:	Jonathan Woithe <jwoithe@physics.adelaide.edu.au>
 L:	linux-acpi@vger.kernel.org
 S:	Maintained
 F:	drivers/platform/x86/fujitsu-laptop.c
 
 FUSE: FILESYSTEM IN USERSPACE
-P:	Miklos Szeredi
-M:	miklos@szeredi.hu
+M:	Miklos Szeredi <miklos@szeredi.hu>
 L:	fuse-devel@lists.sourceforge.net
 W:	http://fuse.sourceforge.net/
 S:	Maintained
@@ -2453,30 +2147,26 @@ F:	fs/fuse/
 F:	include/linux/fuse.h
 
 FUTURE DOMAIN TMC-16x0 SCSI DRIVER (16-bit)
-P:	Rik Faith
-M:	faith@cs.unc.edu
+M:	Rik Faith <faith@cs.unc.edu>
 L:	linux-scsi@vger.kernel.org
 S:	Odd Fixes (e.g., new signatures)
 F:	drivers/scsi/fdomain.*
 
 GDT SCSI DISK ARRAY CONTROLLER DRIVER
-P:	Achim Leubner
-M:	achim_leubner@adaptec.com
+M:	Achim Leubner <achim_leubner@adaptec.com>
 L:	linux-scsi@vger.kernel.org
 W:	http://www.icp-vortex.com/
 S:	Supported
 F:	drivers/scsi/gdt*
 
 GENERIC GPIO I2C DRIVER
-P:	Haavard Skinnemoen
-M:	hskinnemoen@atmel.com
+M:	Haavard Skinnemoen <hskinnemoen@atmel.com>
 S:	Supported
 F:	drivers/i2c/busses/i2c-gpio.c
 F:	include/linux/i2c-gpio.h
 
 GENERIC HDLC (WAN) DRIVERS
-P:	Krzysztof Halasa
-M:	khc@pm.waw.pl
+M:	Krzysztof Halasa <khc@pm.waw.pl>
 W:	http://www.kernel.org/pub/linux/utils/net/hdlc/
 S:	Maintained
 F:	drivers/net/wan/c101.c
@@ -2488,16 +2178,14 @@ F:	drivers/net/wan/pci200syn.c
 F:	drivers/net/wan/wanxl*
 
 GENERIC INCLUDE/ASM HEADER FILES
-P:	Arnd Bergmann
-M:	arnd@arndb.de
+M:	Arnd Bergmann <arnd@arndb.de>
 L:	linux-arch@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic.git
 S:	Maintained
 F:	include/asm-generic
 
 GFS2 FILE SYSTEM
-P:	Steven Whitehouse
-M:	swhiteho@redhat.com
+M:	Steven Whitehouse <swhiteho@redhat.com>
 L:	cluster-devel@redhat.com
 W:	http://sources.redhat.com/cluster/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes.git
@@ -2508,10 +2196,8 @@ F:	fs/gfs2/
 F:	include/linux/gfs2_ondisk.h
 
 GIGASET ISDN DRIVERS
-P:	Hansjoerg Lipp
-M:	hjlipp@web.de
-P:	Tilman Schmidt
-M:	tilman@imap.cc
+M:	Hansjoerg Lipp <hjlipp@web.de>
+M:	Tilman Schmidt <tilman@imap.cc>
 L:	gigaset307x-common@lists.sourceforge.net
 W:	http://gigaset307x.sourceforge.net/
 S:	Maintained
@@ -2520,8 +2206,7 @@ F:	drivers/isdn/gigaset/
 F:	include/linux/gigaset_dev.h
 
 HARD DRIVE ACTIVE PROTECTION SYSTEM (HDAPS) DRIVER
-P:	Frank Seidel
-M:	frank@f-seidel.de
+M:	Frank Seidel <frank@f-seidel.de>
 L:	lm-sensors@lm-sensors.org
 W:	http://www.kernel.org/pub/linux/kernel/people/fseidel/hdaps/
 S:	Maintained
@@ -2533,40 +2218,35 @@ S:	Odd Fixes
 F:	drivers/char/hvc_*
 
 GSPCA FINEPIX SUBDRIVER
-P:	Frank Zago
-M:	frank@zago.net
+M:	Frank Zago <frank@zago.net>
 L:	linux-media@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
 S:	Maintained
 F:	drivers/media/video/gspca/finepix.c
 
 GSPCA M5602 SUBDRIVER
-P:	Erik Andren
-M:	erik.andren@gmail.com
+M:	Erik Andren <erik.andren@gmail.com>
 L:	linux-media@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
 S:	Maintained
 F:	drivers/media/video/gspca/m5602/
 
 GSPCA PAC207 SONIXB SUBDRIVER
-P:	Hans de Goede
-M:	hdegoede@redhat.com
+M:	Hans de Goede <hdegoede@redhat.com>
 L:	linux-media@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
 S:	Maintained
 F:	drivers/media/video/gspca/pac207.c
 
 GSPCA T613 SUBDRIVER
-P:	Leandro Costantino
-M:	lcostantino@gmail.com
+M:	Leandro Costantino <lcostantino@gmail.com>
 L:	linux-media@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
 S:	Maintained
 F:	drivers/media/video/gspca/t613.c
 
 GSPCA USB WEBCAM DRIVER
-P:	Jean-Francois Moine
-M:	moinejf@free.fr
+M:	Jean-Francois Moine <moinejf@free.fr>
 W:	http://moinejf.free.fr
 L:	linux-media@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
@@ -2586,31 +2266,27 @@ F:	drivers/char/hw_random/
 F:	include/linux/hw_random.h
 
 HARMONY SOUND DRIVER
-P:	Kyle McMartin
-M:	kyle@mcmartin.ca
+M:	Kyle McMartin <kyle@mcmartin.ca>
 L:	linux-parisc@vger.kernel.org
 S:	Maintained
 F:	sound/parisc/harmony.*
 
 HAYES ESP SERIAL DRIVER
-P:	Andrew J. Robinson
-M:	arobinso@nyx.net
+M:	"Andrew J. Robinson" <arobinso@nyx.net>
 W:	http://www.nyx.net/~arobinso
 S:	Maintained
 F:	Documentation/serial/hayes-esp.txt
 F:	drivers/char/esp.c
 
 HEWLETT-PACKARD SMART2 RAID DRIVER
-P:	Chirag Kantharia
-M:	chirag.kantharia@hp.com
+M:	Chirag Kantharia <chirag.kantharia@hp.com>
 L:	iss_storagedev@hp.com
 S:	Maintained
 F:	Documentation/blockdev/cpqarray.txt
 F:	drivers/block/cpqarray.*
 
 HEWLETT-PACKARD SMART CISS RAID DRIVER (cciss)
-P:	Mike Miller
-M:	mike.miller@hp.com
+M:	Mike Miller <mike.miller@hp.com>
 L:	iss_storagedev@hp.com
 S:	Supported
 F:	Documentation/blockdev/cciss.txt
@@ -2618,25 +2294,21 @@ F:	drivers/block/cciss*
 F:	include/linux/cciss_ioctl.h
 
 HFS FILESYSTEM
-P:	Roman Zippel
-M:	zippel@linux-m68k.org
+M:	Roman Zippel <zippel@linux-m68k.org>
 S:	Maintained
 F:	Documentation/filesystems/hfs.txt
 F:	fs/hfs/
 
 HGA FRAMEBUFFER DRIVER
-P:	Ferenc Bakonyi
-M:	fero@drama.obuda.kando.hu
+M:	Ferenc Bakonyi <fero@drama.obuda.kando.hu>
 L:	linux-nvidia@lists.surfsouth.com
 W:	http://drama.obuda.kando.hu/~fero/cgi-bin/hgafb.shtml
 S:	Maintained
 F:	drivers/video/hgafb.c
 
 HIBERNATION (aka Software Suspend, aka swsusp)
-P:	Pavel Machek
-M:	pavel@ucw.cz
-P:	Rafael J. Wysocki
-M:	rjw@sisk.pl
+M:	Pavel Machek <pavel@ucw.cz>
+M:	"Rafael J. Wysocki" <rjw@sisk.pl>
 L:	linux-pm@lists.linux-foundation.org
 S:	Supported
 F:	arch/x86/power/
@@ -2648,8 +2320,7 @@ F:	include/linux/pm.h
 F:	arch/*/include/asm/suspend*.h
 
 HID CORE LAYER
-P:	Jiri Kosina
-M:	jkosina@suse.cz
+M:	Jiri Kosina <jkosina@suse.cz>
 L:	linux-input@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid.git
 S:	Maintained
@@ -2657,16 +2328,14 @@ F:	drivers/hid/
 F:	include/linux/hid*
 
 HIGH-RESOLUTION TIMERS, CLOCKEVENTS, DYNTICKS
-P:	Thomas Gleixner
-M:	tglx@linutronix.de
+M:	Thomas Gleixner <tglx@linutronix.de>
 S:	Maintained
 F:	Documentation/timers/
 F:	kernel/hrtimer.c
 F:	include/linux/hrtimer.h
 
 HIGH-SPEED SCC DRIVER FOR AX.25
-P:	Klaus Kudielka
-M:	klaus.kudielka@ieee.org
+M:	Klaus Kudielka <klaus.kudielka@ieee.org>
 L:	linux-hams@vger.kernel.org
 W:	http://www.nt.tuwien.ac.at/~kkudielk/Linux/
 S:	Maintained
@@ -2674,16 +2343,14 @@ F:	drivers/net/hamradio/dmascc.c
 F:	drivers/net/hamradio/scc.c
 
 HIGHPOINT ROCKETRAID 3xxx RAID DRIVER
-P:	HighPoint Linux Team
-M:	linux@highpoint-tech.com
+M:	HighPoint Linux Team <linux@highpoint-tech.com>
 W:	http://www.highpoint-tech.com
 S:	Supported
 F:	Documentation/scsi/hptiop.txt
 F:	drivers/scsi/hptiop.c
 
 HIPPI
-P:	Jes Sorensen
-M:	jes@trained-monkey.org
+M:	Jes Sorensen <jes@trained-monkey.org>
 L:	linux-hippi@sunsite.dk
 S:	Maintained
 F:	include/linux/hippidevice.h
@@ -2691,8 +2358,7 @@ F:	include/linux/if_hippi.h
 F:	net/802/hippi.c
 
 HOST AP DRIVER
-P:	Jouni Malinen
-M:	j@w1.fi
+M:	Jouni Malinen <j@w1.fi>
 L:	hostap@shmoo.com (subscribers-only)
 L:	linux-wireless@vger.kernel.org
 W:	http://hostap.epitest.fi/
@@ -2700,82 +2366,69 @@ S:	Maintained
 F:	drivers/net/wireless/hostap/
 
 HP COMPAQ TC1100 TABLET WMI EXTRAS DRIVER
-P:	Carlos Corbacho
-M:	carlos@strangeworlds.co.uk
+M:	Carlos Corbacho <carlos@strangeworlds.co.uk>
 S:	Odd Fixes
 F:	drivers/platform/x86/tc1100-wmi.c
 
 HP100:	Driver for HP 10/100 Mbit/s Voice Grade Network Adapter Series
-P:	Jaroslav Kysela
-M:	perex@perex.cz
+M:	Jaroslav Kysela <perex@perex.cz>
 S:	Maintained
 F:	drivers/net/hp100.*
 
 HPET:	High Precision Event Timers driver
-P:	Clemens Ladisch
-M:	clemens@ladisch.de
+M:	Clemens Ladisch <clemens@ladisch.de>
 S:	Maintained
 F:	Documentation/timers/hpet.txt
 F:	drivers/char/hpet.c
 F:	include/linux/hpet.h
 
 HPET:	i386
-P:	Venkatesh Pallipadi (Venki)
-M:	venkatesh.pallipadi@intel.com
+M:	"Venkatesh Pallipadi (Venki)" <venkatesh.pallipadi@intel.com>
 S:	Maintained
 F:	arch/x86/kernel/hpet.c
 F:	arch/x86/include/asm/hpet.h
 
 HPET:	x86_64
-P:	Vojtech Pavlik
-M:	vojtech@suse.cz
+M:	Vojtech Pavlik <vojtech@suse.cz>
 S:	Maintained
 
 HPET:	ACPI
-P:	Bob Picco
-M:	bob.picco@hp.com
+M:	Bob Picco <bob.picco@hp.com>
 S:	Maintained
 F:	drivers/char/hpet.c
 
 HPFS FILESYSTEM
-P:	Mikulas Patocka
-M:	mikulas@artax.karlin.mff.cuni.cz
+M:	Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
 W:	http://artax.karlin.mff.cuni.cz/~mikulas/vyplody/hpfs/index-e.cgi
 S:	Maintained
 F:	fs/hpfs/
 
 HSO 3G MODEM DRIVER
-P:	Jan Dumon
-M:	j.dumon@option.com
+M:	Jan Dumon <j.dumon@option.com>
 W:	http://www.pharscape.org
 S:	Maintained
 F:	drivers/net/usb/hso.c
 
 HTCPEN TOUCHSCREEN DRIVER
-P:	Pau Oliva Fora
-M:	pof@eslack.org
+M:	Pau Oliva Fora <pof@eslack.org>
 L:	linux-input@vger.kernel.org
 S:	Maintained
 F:	drivers/input/touchscreen/htcpen.c
 
 HUGETLB FILESYSTEM
-P:	William Irwin
-M:	wli@holomorphy.com
+M:	William Irwin <wli@holomorphy.com>
 S:	Maintained
 F:	fs/hugetlbfs/
 
 I2C/SMBUS STUB DRIVER
-P:	Mark M. Hoffman
-M:	mhoffman@lightlink.com
+M:	"Mark M. Hoffman" <mhoffman@lightlink.com>
 L:	linux-i2c@vger.kernel.org
 S:	Maintained
 F:	drivers/i2c/busses/i2c-stub.c
 
 I2C SUBSYSTEM
-P:	Jean Delvare (PC drivers, core)
-M:	khali@linux-fr.org
-P:	Ben Dooks (embedded platforms)
-M:	ben-linux@fluff.org
+M:	"Jean Delvare (PC drivers, core)" <khali@linux-fr.org>
+M:	"Ben Dooks (embedded platforms)" <ben-linux@fluff.org>
 L:	linux-i2c@vger.kernel.org
 W:	http://i2c.wiki.kernel.org/
 T:	quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-i2c/
@@ -2787,28 +2440,25 @@ F:	include/linux/i2c-dev.h
 F:	include/linux/i2c-id.h
 
 I2C-TINY-USB DRIVER
-P:	Till Harbaum
-M:	till@harbaum.org
+M:	Till Harbaum <till@harbaum.org>
 L:	linux-i2c@vger.kernel.org
 W:	http://www.harbaum.org/till/i2c_tiny_usb
 S:	Maintained
 F:	drivers/i2c/busses/i2c-tiny-usb.c
 
 i386 BOOT CODE
-P:	H. Peter Anvin
-M:	hpa@zytor.com
+M:	"H. Peter Anvin" <hpa@zytor.com>
 S:	Maintained
 F:	arch/x86/boot/
 
 i386 SETUP CODE / CPU ERRATA WORKAROUNDS
-P:	H. Peter Anvin
-M:	hpa@zytor.com
+M:	"H. Peter Anvin" <hpa@zytor.com>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/hpa/linux-2.6-x86setup.git
 S:	Maintained
 
 IA64 (Itanium) PLATFORM
-P:	Tony Luck
-M:	tony.luck@intel.com
+M:	Tony Luck <tony.luck@intel.com>
+M:	Fenghua Yu <fenghua.yu@intel.com>
 L:	linux-ia64@vger.kernel.org
 W:	http://www.ia64-linux.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6.git
@@ -2816,29 +2466,25 @@ S:	Maintained
 F:	arch/ia64/
 
 IBM MCA SCSI SUBSYSTEM DRIVER
-P:	Michael Lang
-M:	langa2@kph.uni-mainz.de
+M:	Michael Lang <langa2@kph.uni-mainz.de>
 W:	http://www.uni-mainz.de/~langm000/linux.html
 S:	Maintained
 F:	drivers/scsi/ibmmca.c
 
 IBM Power Linux RAID adapter
-P:	Brian King
-M:	brking@us.ibm.com
+M:	Brian King <brking@us.ibm.com>
 S:	Supported
 F:	drivers/scsi/ipr.*
 
 IBM ServeRAID RAID DRIVER
 P:	Jack Hammer
-P:	Dave Jeffery
-M:	ipslinux@adaptec.com
+M:	Dave Jeffery <ipslinux@adaptec.com>
 W:	http://www.developer.ibm.com/welcome/netfinity/serveraid.html
 S:	Supported
 F:	drivers/scsi/ips.*
 
 IDE SUBSYSTEM
-P:	David S. Miller
-M:	davem@davemloft.net
+M:	"David S. Miller" <davem@davemloft.net>
 L:	linux-ide@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6.git
 S:	Maintained
@@ -2847,25 +2493,21 @@ F:	drivers/ide/
 F:	include/linux/ide.h
 
 IDE/ATAPI DRIVERS
-P:	Borislav Petkov
-M:	petkovbb@gmail.com
+M:	Borislav Petkov <petkovbb@gmail.com>
 L:	linux-ide@vger.kernel.org
 S:	Maintained
 F:	Documentation/cdrom/ide-cd
 F:	drivers/ide/ide-cd*
 
 IDLE-I7300
-P:	Andy Henroid
-M:	andrew.d.henroid@intel.com
+M:	Andy Henroid <andrew.d.henroid@intel.com>
 L:	linux-pm@lists.linux-foundation.org
 S:	Supported
 F:	drivers/idle/i7300_idle.c
 
 IEEE 1394 SUBSYSTEM
-P:	Ben Collins
-M:	ben.collins@ubuntu.com
-P:	Stefan Richter
-M:	stefanr@s5r6.in-berlin.de
+M:	Ben Collins <ben.collins@ubuntu.com>
+M:	Stefan Richter <stefanr@s5r6.in-berlin.de>
 L:	linux1394-devel@lists.sourceforge.net
 W:	http://www.linux1394.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6.git
@@ -2873,20 +2515,16 @@ S:	Maintained
 F:	drivers/ieee1394/
 
 IEEE 1394 RAW I/O DRIVER
-P:	Dan Dennedy
-M:	dan@dennedy.org
-P:	Stefan Richter
-M:	stefanr@s5r6.in-berlin.de
+M:	Dan Dennedy <dan@dennedy.org>
+M:	Stefan Richter <stefanr@s5r6.in-berlin.de>
 L:	linux1394-devel@lists.sourceforge.net
 S:	Maintained
 F:	drivers/ieee1394/raw1394*
 
 IEEE 802.15.4 SUBSYSTEM
-P:	Dmitry Eremin-Solenikov
-M:	dbaryshkov@gmail.com
-P:	Sergey Lapin
-M:	slapin@ossfans.org
-L:	linux-zigbee-devel@lists.sourceforge.net
+M:	Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
+M:	Sergey Lapin <slapin@ossfans.org>
+L:	linux-zigbee-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:	http://apps.sourceforge.net/trac/linux-zigbee
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lowpan/lowpan.git
 S:	Maintained
@@ -2894,8 +2532,7 @@ F:	net/ieee802154/
 F:	drivers/ieee802154/
 
 INTEGRITY MEASUREMENT ARCHITECTURE (IMA)
-P:	Mimi Zohar
-M:	zohar@us.ibm.com
+M:	Mimi Zohar <zohar@us.ibm.com>
 S:	Supported
 F:	security/integrity/ima/
 
@@ -2905,12 +2542,9 @@ S:	Orphan
 F:	drivers/video/imsttfb.c
 
 INFINIBAND SUBSYSTEM
-P:	Roland Dreier
-M:	rolandd@cisco.com
-P:	Sean Hefty
-M:	sean.hefty@intel.com
-P:	Hal Rosenstock
-M:	hal.rosenstock@gmail.com
+M:	Roland Dreier <rolandd@cisco.com>
+M:	Sean Hefty <sean.hefty@intel.com>
+M:	Hal Rosenstock <hal.rosenstock@gmail.com>
 L:	general@lists.openfabrics.org (moderated for non-subscribers)
 W:	http://www.openib.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband.git
@@ -2920,65 +2554,55 @@ F:	drivers/infiniband/
 F:	include/linux/if_infiniband.h
 
 INOTIFY
-P:	John McCutchan
-M:	john@johnmccutchan.com
-P:	Robert Love
-M:	rlove@rlove.org
-P:	Eric Paris
-M:	eparis@parisplace.org
+M:	John McCutchan <john@johnmccutchan.com>
+M:	Robert Love <rlove@rlove.org>
+M:	Eric Paris <eparis@parisplace.org>
 S:	Maintained
 F:	Documentation/filesystems/inotify.txt
 F:	fs/notify/inotify/
 F:	include/linux/inotify.h
 
 INPUT (KEYBOARD, MOUSE, JOYSTICK, TOUCHSCREEN) DRIVERS
-P:	Dmitry Torokhov
-M:	dmitry.torokhov@gmail.com
-M:	dtor@mail.ru
+M:	Dmitry Torokhov <dmitry.torokhov@gmail.com>
+M:	Dmitry Torokhov <dtor@mail.ru>
 L:	linux-input@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input.git
 S:	Maintained
 F:	drivers/input/
 
 INTEL FRAMEBUFFER DRIVER (excluding 810 and 815)
-P:	Sylvain Meyer
-M:	sylvain.meyer@worldonline.fr
+M:	Sylvain Meyer <sylvain.meyer@worldonline.fr>
 L:	linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
 S:	Maintained
 F:	Documentation/fb/intelfb.txt
 F:	drivers/video/intelfb/
 
 INTEL 810/815 FRAMEBUFFER DRIVER
-P:	Antonino Daplas
-M:	adaplas@gmail.com
+M:	Antonino Daplas <adaplas@gmail.com>
 L:	linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
 S:	Maintained
 F:	drivers/video/i810/
 
 INTEL MENLOW THERMAL DRIVER
-P:	Sujith Thomas
-M:	sujith.thomas@intel.com
+M:	Sujith Thomas <sujith.thomas@intel.com>
 L:	linux-acpi@vger.kernel.org
 W:	http://www.lesswatts.org/projects/acpi/
 S:	Supported
 F:	drivers/platform/x86/intel_menlow.c
 
 INTEL IA32 MICROCODE UPDATE SUPPORT
-P:	Tigran Aivazian
-M:	tigran@aivazian.fsnet.co.uk
+M:	Tigran Aivazian <tigran@aivazian.fsnet.co.uk>
 S:	Maintained
 F:	arch/x86/kernel/microcode_core.c
 F:	arch/x86/kernel/microcode_intel.c
 
 INTEL I/OAT DMA DRIVER
-P:	Maciej Sosnowski
-M:	maciej.sosnowski@intel.com
+M:	Maciej Sosnowski <maciej.sosnowski@intel.com>
 S:	Supported
 F:	drivers/dma/ioat*
 
 INTEL IOMMU (VT-d)
-P:	David Woodhouse
-M:	dwmw2@infradead.org
+M:	David Woodhouse <dwmw2@infradead.org>
 L:	iommu@lists.linux-foundation.org
 T:	git git://git.infradead.org/iommu-2.6.git
 S:	Supported
@@ -2986,14 +2610,12 @@ F:	drivers/pci/intel-iommu.c
 F:	include/linux/intel-iommu.h
 
 INTEL IOP-ADMA DMA DRIVER
-P:	Dan Williams
-M:	dan.j.williams@intel.com
+M:	Dan Williams <dan.j.williams@intel.com>
 S:	Supported
 F:	drivers/dma/iop-adma.c
 
 INTEL IXP4XX QMGR, NPE, ETHERNET and HSS SUPPORT
-P:	Krzysztof Halasa
-M:	khc@pm.waw.pl
+M:	Krzysztof Halasa <khc@pm.waw.pl>
 S:	Maintained
 F:	arch/arm/mach-ixp4xx/include/mach/qmgr.h
 F:	arch/arm/mach-ixp4xx/include/mach/npe.h
@@ -3003,29 +2625,22 @@ F:	drivers/net/arm/ixp4xx_eth.c
 F:	drivers/net/wan/ixp4xx_hss.c
 
 INTEL IXP4XX RANDOM NUMBER GENERATOR SUPPORT
-P:	Deepak Saxena
-M:	dsaxena@plexity.net
+M:	Deepak Saxena <dsaxena@plexity.net>
 S:	Maintained
 F:	drivers/char/hw_random/ixp4xx-rng.c
 
 INTEL IXP2000 ETHERNET DRIVER
-P:	Lennert Buytenhek
-M:	kernel@wantstofly.org
+M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/ixp2000/
 
 INTEL ETHERNET DRIVERS (e100/e1000/e1000e/igb/ixgb/ixgbe)
-P:	Jeff Kirsher
-M:	jeffrey.t.kirsher@intel.com
-P:	Jesse Brandeburg
-M:	jesse.brandeburg@intel.com
-P:	Bruce Allan
-M:	bruce.w.allan@intel.com
-P:	PJ Waskiewicz
-M:	peter.p.waskiewicz.jr@intel.com
-P:	John Ronciak
-M:	john.ronciak@intel.com
+M:	Jeff Kirsher <jeffrey.t.kirsher@intel.com>
+M:	Jesse Brandeburg <jesse.brandeburg@intel.com>
+M:	Bruce Allan <bruce.w.allan@intel.com>
+M:	PJ Waskiewicz <peter.p.waskiewicz.jr@intel.com>
+M:	John Ronciak <john.ronciak@intel.com>
 L:	e1000-devel@lists.sourceforge.net
 W:	http://e1000.sourceforge.net/
 S:	Supported
@@ -3037,12 +2652,9 @@ F:	drivers/net/ixgb/
 F:	drivers/net/ixgbe/
 
 INTEL PRO/WIRELESS 2100 NETWORK CONNECTION SUPPORT
-P:	Zhu Yi
-M:	yi.zhu@intel.com
-P:	James Ketrenos
-M:	jketreno@linux.intel.com
-P:	Reinette Chatre
-M:	reinette.chatre@intel.com
+M:	Zhu Yi <yi.zhu@intel.com>
+M:	James Ketrenos <jketreno@linux.intel.com>
+M:	Reinette Chatre <reinette.chatre@intel.com>
 L:	linux-wireless@vger.kernel.org
 L:	ipw2100-devel@lists.sourceforge.net
 W:	http://lists.sourceforge.net/mailman/listinfo/ipw2100-devel
@@ -3052,12 +2664,9 @@ F:	Documentation/networking/README.ipw2100
 F:	drivers/net/wireless/ipw2x00/ipw2100.*
 
 INTEL PRO/WIRELESS 2915ABG NETWORK CONNECTION SUPPORT
-P:	Zhu Yi
-M:	yi.zhu@intel.com
-P:	James Ketrenos
-M:	jketreno@linux.intel.com
-P:	Reinette Chatre
-M:	reinette.chatre@intel.com
+M:	Zhu Yi <yi.zhu@intel.com>
+M:	James Ketrenos <jketreno@linux.intel.com>
+M:	Reinette Chatre <reinette.chatre@intel.com>
 L:	linux-wireless@vger.kernel.org
 L:	ipw2100-devel@lists.sourceforge.net
 W:	http://lists.sourceforge.net/mailman/listinfo/ipw2100-devel
@@ -3067,8 +2676,7 @@ F:	Documentation/networking/README.ipw2200
 F:	drivers/net/wireless/ipw2x00/ipw2200.*
 
 INTEL WIRELESS WIMAX CONNECTION 2400
-P:	Inaky Perez-Gonzalez
-M:	inaky.perez-gonzalez@intel.com
+M:	Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
 M:	linux-wimax@intel.com
 L:	wimax@linuxwimax.org
 S:	Supported
@@ -3078,10 +2686,8 @@ F:	drivers/net/wimax/i2400m/
 F:	include/linux/wimax/i2400m.h
 
 INTEL WIRELESS WIFI LINK (iwlwifi)
-P:	Zhu Yi
-M:	yi.zhu@intel.com
-P:	Reinette Chatre
-M:	reinette.chatre@intel.com
+M:	Zhu Yi <yi.zhu@intel.com>
+M:	Reinette Chatre <reinette.chatre@intel.com>
 L:	linux-wireless@vger.kernel.org
 L:	ipw3945-devel@lists.sourceforge.net
 W:	http://intellinuxwireless.org
@@ -3090,47 +2696,39 @@ S:	Supported
 F:	drivers/net/wireless/iwlwifi/
 
 IOC3 ETHERNET DRIVER
-P:	Ralf Baechle
-M:	ralf@linux-mips.org
+M:	Ralf Baechle <ralf@linux-mips.org>
 L:	linux-mips@linux-mips.org
 S:	Maintained
 F:	drivers/net/ioc3-eth.c
 
 IOC3 SERIAL DRIVER
-P:	Pat Gefre
-M:	pfg@sgi.com
+M:	Pat Gefre <pfg@sgi.com>
 L:	linux-mips@linux-mips.org
 S:	Maintained
 F:	drivers/serial/ioc3_serial.c
 
 IP MASQUERADING
-P:	Juanjo Ciarlante
-M:	jjciarla@raiz.uncu.edu.ar
+M:	Juanjo Ciarlante <jjciarla@raiz.uncu.edu.ar>
 S:	Maintained
 F:	net/ipv4/netfilter/ipt_MASQUERADE.c
 
 IP1000A 10/100/1000 GIGABIT ETHERNET DRIVER
-P:	Francois Romieu
-M:	romieu@fr.zoreil.com
-P:	Sorbica Shieh
-M:	sorbica@icplus.com.tw
-P:	Jesse Huang
-M:	jesse@icplus.com.tw
+M:	Francois Romieu <romieu@fr.zoreil.com>
+M:	Sorbica Shieh <sorbica@icplus.com.tw>
+M:	Jesse Huang <jesse@icplus.com.tw>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/ipg.c
 
 IPATH DRIVER
-P:	Ralph Campbell
-M:	infinipath@qlogic.com
+M:	Ralph Campbell <infinipath@qlogic.com>
 L:	general@lists.openfabrics.org
 T:	git git://git.qlogic.com/ipath-linux-2.6
 S:	Supported
 F:	drivers/infiniband/hw/ipath/
 
 IPMI SUBSYSTEM
-P:	Corey Minyard
-M:	minyard@acm.org
+M:	Corey Minyard <minyard@acm.org>
 L:	openipmi-developer@lists.sourceforge.net
 W:	http://openipmi.sourceforge.net/
 S:	Supported
@@ -3139,20 +2737,16 @@ F:	drivers/char/ipmi/
 F:	include/linux/ipmi*
 
 IPS SCSI RAID DRIVER
-P:	Adaptec OEM Raid Solutions
-M:	aacraid@adaptec.com
+M:	Adaptec OEM Raid Solutions <aacraid@adaptec.com>
 L:	linux-scsi@vger.kernel.org
 W:	http://www.adaptec.com/
 S:	Maintained
 F:	drivers/scsi/ips*
 
 IPVS
-P:	Wensong Zhang
-M:	wensong@linux-vs.org
-P:	Simon Horman
-M:	horms@verge.net.au
-P:	Julian Anastasov
-M:	ja@ssi.bg
+M:	Wensong Zhang <wensong@linux-vs.org>
+M:	Simon Horman <horms@verge.net.au>
+M:	Julian Anastasov <ja@ssi.bg>
 L:	netdev@vger.kernel.org
 L:	lvs-devel@vger.kernel.org
 S:	Maintained
@@ -3160,17 +2754,14 @@ F:	Documentation/networking/ipvs-sysctl.txt
 F:	net/netfilter/ipvs/
 
 IPWIRELESS DRIVER
-P:	Jiri Kosina
-M:	jkosina@suse.cz
-P:	David Sterba
-M:	dsterba@suse.cz
+M:	Jiri Kosina <jkosina@suse.cz>
+M:	David Sterba <dsterba@suse.cz>
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/ipwireless_cs.git
 F:	drivers/char/pcmcia/ipwireless/
 
 IPX NETWORK LAYER
-P:	Arnaldo Carvalho de Melo
-M:	acme@ghostprotocols.net
+M:	Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	include/linux/ipx.h
@@ -3178,8 +2769,7 @@ F:	include/net/ipx.h
 F:	net/ipx/
 
 IRDA SUBSYSTEM
-P:	Samuel Ortiz
-M:	samuel@sortiz.org
+M:	Samuel Ortiz <samuel@sortiz.org>
 L:	irda-users@lists.sourceforge.net (subscribers-only)
 W:	http://irda.sourceforge.net/
 S:	Maintained
@@ -3190,16 +2780,14 @@ F:	include/net/irda/
 F:	net/irda/
 
 ISAPNP
-P:	Jaroslav Kysela
-M:	perex@perex.cz
+M:	Jaroslav Kysela <perex@perex.cz>
 S:	Maintained
 F:	Documentation/isapnp.txt
 F:	drivers/pnp/isapnp/
 F:	include/linux/isapnp.h
 
 ISCSI
-P:	Mike Christie
-M:	michaelc@cs.wisc.edu
+M:	Mike Christie <michaelc@cs.wisc.edu>
 L:	open-iscsi@googlegroups.com
 W:	www.open-iscsi.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mnc/linux-2.6-iscsi.git
@@ -3208,8 +2796,7 @@ F:	drivers/scsi/*iscsi*
 F:	include/scsi/*iscsi*
 
 ISDN SUBSYSTEM
-P:	Karsten Keil
-M:	isdn@linux-pingi.de
+M:	Karsten Keil <isdn@linux-pingi.de>
 L:	isdn4linux@listserv.isdn4linux.de (subscribers-only)
 W:	http://www.isdn4linux.de
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kkeil/isdn-2.6.git
@@ -3220,18 +2807,15 @@ F:	include/linux/isdn.h
 F:	include/linux/isdn/
 
 ISDN SUBSYSTEM (Eicon active card driver)
-P:	Armin Schindler
-M:	mac@melware.de
+M:	Armin Schindler <mac@melware.de>
 L:	isdn4linux@listserv.isdn4linux.de (subscribers-only)
 W:	http://www.melware.de
 S:	Maintained
 F:	drivers/isdn/hardware/eicon/
 
 IVTV VIDEO4LINUX DRIVER
-P:	Hans Verkuil
-M:	hverkuil@xs4all.nl
+M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	ivtv-devel@ivtvdriver.org
-L:	ivtv-users@ivtvdriver.org
 L:	linux-media@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
 W:	http://www.ivtvdriver.org
@@ -3241,25 +2825,22 @@ F:	drivers/media/video/ivtv/
 F:	include/linux/ivtv*
 
 JFS FILESYSTEM
-P:	Dave Kleikamp
-M:	shaggy@austin.ibm.com
+M:	Dave Kleikamp <shaggy@linux.vnet.ibm.com>
 L:	jfs-discussion@lists.sourceforge.net
 W:	http://jfs.sourceforge.net/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6.git
-S:	Supported
+S:	Maintained
 F:	Documentation/filesystems/jfs.txt
 F:	fs/jfs/
 
 JME NETWORK DRIVER
-P:	Guo-Fu Tseng
-M:	cooldavid@cooldavid.org
+M:	Guo-Fu Tseng <cooldavid@cooldavid.org>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/jme.*
 
 JOURNALLING FLASH FILE SYSTEM V2 (JFFS2)
-P:	David Woodhouse
-M:	dwmw2@infradead.org
+M:	David Woodhouse <dwmw2@infradead.org>
 L:	linux-mtd@lists.infradead.org
 W:	http://www.linux-mtd.infradead.org/doc/jffs2.html
 S:	Maintained
@@ -3267,10 +2848,8 @@ F:	fs/jffs2/
 F:	include/linux/jffs2.h
 
 JOURNALLING LAYER FOR BLOCK DEVICES (JBD)
-P:	Stephen Tweedie
-M:	sct@redhat.com
-P:	Andrew Morton
-M:	akpm@linux-foundation.org
+M:	Stephen Tweedie <sct@redhat.com>
+M:	Andrew Morton <akpm@linux-foundation.org>
 L:	linux-ext4@vger.kernel.org
 S:	Maintained
 F:	fs/jbd*/
@@ -3278,48 +2857,41 @@ F:	include/linux/ext*jbd*.h
 F:	include/linux/jbd*.h
 
 K8TEMP HARDWARE MONITORING DRIVER
-P:	Rudolf Marek
-M:	r.marek@assembler.cz
+M:	Rudolf Marek <r.marek@assembler.cz>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	Documentation/hwmon/k8temp
 F:	drivers/hwmon/k8temp.c
 
 KCONFIG
-P:	Roman Zippel
-M:	zippel@linux-m68k.org
+M:	Roman Zippel <zippel@linux-m68k.org>
 L:	linux-kbuild@vger.kernel.org
 S:	Maintained
 F:	Documentation/kbuild/kconfig-language.txt
 F:	scripts/kconfig/
 
 KDUMP
-P:	Vivek Goyal
-M:	vgoyal@redhat.com
-P:	Haren Myneni
-M:	hbabu@us.ibm.com
+M:	Vivek Goyal <vgoyal@redhat.com>
+M:	Haren Myneni <hbabu@us.ibm.com>
 L:	kexec@lists.infradead.org
 W:	http://lse.sourceforge.net/kdump/
 S:	Maintained
 F:	Documentation/kdump/
 
 KERNEL AUTOMOUNTER (AUTOFS)
-P:	H. Peter Anvin
-M:	hpa@zytor.com
+M:	"H. Peter Anvin" <hpa@zytor.com>
 L:	autofs@linux.kernel.org
 S:	Odd Fixes
 F:	fs/autofs/
 
 KERNEL AUTOMOUNTER v4 (AUTOFS4)
-P:	Ian Kent
-M:	raven@themaw.net
+M:	Ian Kent <raven@themaw.net>
 L:	autofs@linux.kernel.org
 S:	Maintained
 F:	fs/autofs4/
 
 KERNEL BUILD
-P:	Sam Ravnborg
-M:	sam@ravnborg.org
+M:	Sam Ravnborg <sam@ravnborg.org>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-next.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes.git
 L:	linux-kbuild@vger.kernel.org
@@ -3329,16 +2901,13 @@ F:	Makefile
 F:	scripts/Makefile.*
 
 KERNEL JANITORS
-P:	Several
 L:	kernel-janitors@vger.kernel.org
 W:	http://www.kerneljanitors.org/
-S:	Maintained
+S:	Odd fixes
 
 KERNEL NFSD, SUNRPC, AND LOCKD SERVERS
-P:	J. Bruce Fields
-M:	bfields@fieldses.org
-P:	Neil Brown
-M:	neilb@suse.de
+M:	"J. Bruce Fields" <bfields@fieldses.org>
+M:	Neil Brown <neilb@suse.de>
 L:	linux-nfs@vger.kernel.org
 W:	http://nfs.sourceforge.net/
 S:	Supported
@@ -3351,8 +2920,7 @@ F:	include/linux/lockd/
 F:	include/linux/sunrpc/
 
 KERNEL VIRTUAL MACHINE (KVM)
-P:	Avi Kivity
-M:	avi@redhat.com
+M:	Avi Kivity <avi@redhat.com>
 L:	kvm@vger.kernel.org
 W:	http://kvm.qumranet.com
 S:	Supported
@@ -3363,8 +2931,7 @@ F:	include/linux/kvm*
 F:	virt/kvm/
 
 KERNEL VIRTUAL MACHINE (KVM) FOR AMD-V
-P:	Joerg Roedel
-M:	joerg.roedel@amd.com
+M:	Joerg Roedel <joerg.roedel@amd.com>
 L:	kvm@vger.kernel.org
 W:	http://kvm.qumranet.com
 S:	Supported
@@ -3373,8 +2940,7 @@ F:	arch/x86/kvm/kvm_svm.h
 F:	arch/x86/kvm/svm.c
 
 KERNEL VIRTUAL MACHINE (KVM) FOR POWERPC
-P:	Hollis Blanchard
-M:	hollisb@us.ibm.com
+M:	Hollis Blanchard <hollisb@us.ibm.com>
 L:	kvm-ppc@vger.kernel.org
 W:	http://kvm.qumranet.com
 S:	Supported
@@ -3382,8 +2948,7 @@ F:	arch/powerpc/include/asm/kvm*
 F:	arch/powerpc/kvm/
 
 KERNEL VIRTUAL MACHINE For Itanium (KVM/IA64)
-P:	Xiantao Zhang
-M:	xiantao.zhang@intel.com
+M:	Xiantao Zhang <xiantao.zhang@intel.com>
 L:	kvm-ia64@vger.kernel.org
 W:	http://kvm.qumranet.com
 S:	Supported
@@ -3392,10 +2957,8 @@ F:	arch/ia64/include/asm/kvm*
 F:	arch/ia64/kvm/
 
 KERNEL VIRTUAL MACHINE for s390 (KVM/s390)
-P:	Carsten Otte
-M:	cotte@de.ibm.com
-P:	Christian Borntraeger
-M:	borntraeger@de.ibm.com
+M:	Carsten Otte <cotte@de.ibm.com>
+M:	Christian Borntraeger <borntraeger@de.ibm.com>
 M:	linux390@de.ibm.com
 L:	linux-s390@vger.kernel.org
 W:	http://www.ibm.com/developerworks/linux/linux390/
@@ -3405,8 +2968,7 @@ F:	arch/s390/include/asm/kvm*
 F:	arch/s390/kvm/
 
 KEXEC
-P:	Eric Biederman
-M:	ebiederm@xmission.com
+M:	Eric Biederman <ebiederm@xmission.com>
 W:	http://ftp.kernel.org/pub/linux/kernel/people/horms/kexec-tools/
 L:	kexec@lists.infradead.org
 S:	Maintained
@@ -3414,8 +2976,7 @@ F:	include/linux/kexec.h
 F:	kernel/kexec.c
 
 KGDB
-P:	Jason Wessel
-M:	jason.wessel@windriver.com
+M:	Jason Wessel <jason.wessel@windriver.com>
 L:	kgdb-bugreport@lists.sourceforge.net
 S:	Maintained
 F:	Documentation/DocBook/kgdb.tmpl
@@ -3425,17 +2986,13 @@ F:	include/linux/kgdb.h
 F:	kernel/kgdb.c
 
 KMEMCHECK
-P:	Vegard Nossum
-M:	vegardno@ifi.uio.no
+M:	Vegard Nossum <vegardno@ifi.uio.no>
 P	Pekka Enberg
 M:	penberg@cs.helsinki.fi
-L:	linux-kernel@vger.kernel.org
 S:	Maintained
 
 KMEMLEAK
-P:	Catalin Marinas
-M:	catalin.marinas@arm.com
-L:	linux-kernel@vger.kernel.org
+M:	Catalin Marinas <catalin.marinas@arm.com>
 S:	Maintained
 F:	Documentation/kmemleak.txt
 F:	include/linux/kmemleak.h
@@ -3443,30 +3000,24 @@ F:	mm/kmemleak.c
 F:	mm/kmemleak-test.c
 
 KMEMTRACE
-P:	Eduard - Gabriel Munteanu
-M:	eduard.munteanu@linux360.ro
+M:	Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
 S:	Maintained
 F:	Documentation/trace/kmemtrace.txt
 F:	include/linux/kmemtrace.h
 F:	kernel/trace/kmemtrace.c
 
 KPROBES
-P:	Ananth N Mavinakayanahalli
-M:	ananth@in.ibm.com
-P:	Anil S Keshavamurthy
-M:	anil.s.keshavamurthy@intel.com
-P:	David S. Miller
-M:	davem@davemloft.net
-P:	Masami Hiramatsu
-M:	mhiramat@redhat.com
+M:	Ananth N Mavinakayanahalli <ananth@in.ibm.com>
+M:	Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
+M:	"David S. Miller" <davem@davemloft.net>
+M:	Masami Hiramatsu <mhiramat@redhat.com>
 S:	Maintained
 F:	Documentation/kprobes.txt
 F:	include/linux/kprobes.h
 F:	kernel/kprobes.c
 
 KS0108 LCD CONTROLLER DRIVER
-P:	Miguel Ojeda Sandonis
-M:	miguel.ojeda.sandonis@gmail.com
+M:	Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com>
 W:	http://miguelojeda.es/auxdisplay.htm
 W:	http://jair.lab.fi.uva.es/~migojed/auxdisplay.htm
 S:	Maintained
@@ -3482,31 +3033,27 @@ F:	include/*/lapb.h
 F:	net/lapb/
 
 LASI 53c700 driver for PARISC
-P:	James E.J. Bottomley
-M:	James.Bottomley@HansenPartnership.com
+M:	"James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
 L:	linux-scsi@vger.kernel.org
 S:	Maintained
 F:	Documentation/scsi/53c700.txt
 F:	drivers/scsi/53c700*
 
 LED SUBSYSTEM
-P:	Richard Purdie
-M:	rpurdie@rpsys.net
+M:	Richard Purdie <rpurdie@rpsys.net>
 S:	Maintained
 F:	drivers/leds/
 F:	include/linux/leds.h
 
 LEGO USB Tower driver
-P:	Juergen Stuber
-M:	starblue@users.sourceforge.net
+M:	Juergen Stuber <starblue@users.sourceforge.net>
 L:	legousb-devel@lists.sourceforge.net
 W:	http://legousb.sourceforge.net/
 S:	Maintained
 F:	drivers/usb/misc/legousbtower.c
 
 LGUEST
-P:	Rusty Russell
-M:	rusty@rustcorp.com.au
+M:	Rusty Russell <rusty@rustcorp.com.au>
 L:	lguest@ozlabs.org
 W:	http://lguest.ozlabs.org/
 S:	Maintained
@@ -3517,119 +3064,100 @@ F:	include/linux/lguest*.h
 F:	arch/x86/include/asm/lguest*.h
 
 LINUX FOR IBM pSERIES (RS/6000)
-P:	Paul Mackerras
-M:	paulus@au.ibm.com
+M:	Paul Mackerras <paulus@au.ibm.com>
 W:	http://www.ibm.com/linux/ltc/projects/ppc
 S:	Supported
 
 LINUX FOR POWERPC (32-BIT AND 64-BIT)
-P:	Benjamin Herrenschmidt
-M:	benh@kernel.crashing.org
-P:	Paul Mackerras
-M:	paulus@samba.org
+M:	Benjamin Herrenschmidt <benh@kernel.crashing.org>
+M:	Paul Mackerras <paulus@samba.org>
 W:	http://www.penguinppc.org/
 L:	linuxppc-dev@ozlabs.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc.git
 S:	Supported
 
 LINUX FOR POWER MACINTOSH
-P:	Benjamin Herrenschmidt
-M:	benh@kernel.crashing.org
+M:	Benjamin Herrenschmidt <benh@kernel.crashing.org>
 W:	http://www.penguinppc.org/
 L:	linuxppc-dev@ozlabs.org
 S:	Maintained
 
 LINUX FOR POWERPC EMBEDDED MPC5XXX
-P:	Grant Likely
-M:	grant.likely@secretlab.ca
+M:	Grant Likely <grant.likely@secretlab.ca>
 L:	linuxppc-dev@ozlabs.org
 T:	git git://git.secretlab.ca/git/linux-2.6.git
 S:	Maintained
 
 LINUX FOR POWERPC EMBEDDED PPC4XX
-P:	Josh Boyer
-M:	jwboyer@linux.vnet.ibm.com
-P:	Matt Porter
-M:	mporter@kernel.crashing.org
+M:	Josh Boyer <jwboyer@linux.vnet.ibm.com>
+M:	Matt Porter <mporter@kernel.crashing.org>
 W:	http://www.penguinppc.org/
 L:	linuxppc-dev@ozlabs.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx.git
 S:	Maintained
 
 LINUX FOR POWERPC EMBEDDED XILINX VIRTEX
-P:	Grant Likely
-M:	grant.likely@secretlab.ca
+M:	Grant Likely <grant.likely@secretlab.ca>
 W:	http://wiki.secretlab.ca/index.php/Linux_on_Xilinx_Virtex
 L:	linuxppc-dev@ozlabs.org
 T:	git git://git.secretlab.ca/git/linux-2.6.git
 S:	Maintained
 
 LINUX FOR POWERPC EMBEDDED PPC8XX
-P:	Vitaly Bordug
-M:	vitb@kernel.crashing.org
-P:	Marcelo Tosatti
-M:	marcelo@kvack.org
+M:	Vitaly Bordug <vitb@kernel.crashing.org>
+M:	Marcelo Tosatti <marcelo@kvack.org>
 W:	http://www.penguinppc.org/
 L:	linuxppc-dev@ozlabs.org
 S:	Maintained
 
 LINUX FOR POWERPC EMBEDDED PPC83XX AND PPC85XX
-P:	Kumar Gala
-M:	galak@kernel.crashing.org
+M:	Kumar Gala <galak@kernel.crashing.org>
 W:	http://www.penguinppc.org/
 L:	linuxppc-dev@ozlabs.org
 S:	Maintained
 
 LINUX FOR POWERPC PA SEMI PWRFICIENT
-P:	Olof Johansson
-M:	olof@lixom.net
+M:	Olof Johansson <olof@lixom.net>
 W:	http://www.pasemi.com/
 L:	linuxppc-dev@ozlabs.org
 S:	Supported
 
 LINUX SECURITY MODULE (LSM) FRAMEWORK
-P:	Chris Wright
-M:	chrisw@sous-sol.org
+M:	Chris Wright <chrisw@sous-sol.org>
 L:	linux-security-module@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/chrisw/lsm-2.6.git
 S:	Supported
 
 LLC (802.2)
-P:	Arnaldo Carvalho de Melo
-M:	acme@ghostprotocols.net
+M:	Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
 S:	Maintained
 F:	include/linux/llc.h
 F:	include/net/llc*
 F:	net/llc/
 
 LIS3LV02D ACCELEROMETER DRIVER
-P:	Eric Piel
-M:	eric.piel@tremplin-utc.net
+M:	Eric Piel <eric.piel@tremplin-utc.net>
 S:	Maintained
 F:	Documentation/hwmon/lis3lv02d
 F:	drivers/hwmon/lis3lv02d.*
 
 LM83 HARDWARE MONITOR DRIVER
-P:	Jean Delvare
-M:	khali@linux-fr.org
+M:	Jean Delvare <khali@linux-fr.org>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	Documentation/hwmon/lm83
 F:	drivers/hwmon/lm83.c
 
 LM90 HARDWARE MONITOR DRIVER
-P:	Jean Delvare
-M:	khali@linux-fr.org
+M:	Jean Delvare <khali@linux-fr.org>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	Documentation/hwmon/lm90
 F:	drivers/hwmon/lm90.c
 
 LOCKDEP AND LOCKSTAT
-P:	Peter Zijlstra
-M:	peterz@infradead.org
-P:	Ingo Molnar
-M:	mingo@redhat.com
+M:	Peter Zijlstra <peterz@infradead.org>
+M:	Ingo Molnar <mingo@redhat.com>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/peterz/linux-2.6-lockdep.git
 S:	Maintained
 F:	Documentation/lockdep*.txt
@@ -3638,8 +3166,7 @@ F:	include/linux/lockdep.h
 F:	kernel/lockdep*
 
 LOGICAL DISK MANAGER SUPPORT (LDM, Windows 2000/XP/Vista Dynamic Disks)
-P:	Richard Russon (FlatCap)
-M:	ldm@flatcap.org
+M:	"Richard Russon (FlatCap)" <ldm@flatcap.org>
 L:	linux-ntfs-dev@lists.sourceforge.net
 W:	http://www.linux-ntfs.org/content/view/19/37/
 S:	Maintained
@@ -3647,8 +3174,7 @@ F:	Documentation/ldm.txt
 F:	fs/partitions/ldm.*
 
 LSILOGIC MPT FUSION DRIVERS (FC/SAS/SPI)
-P:	Eric Moore
-M:	Eric.Moore@lsi.com
+M:	Eric Moore <Eric.Moore@lsi.com>
 M:	support@lsi.com
 L:	DL-MPTFusionLinux@lsi.com
 L:	linux-scsi@vger.kernel.org
@@ -3657,25 +3183,21 @@ S:	Supported
 F:	drivers/message/fusion/
 
 LSILOGIC/SYMBIOS/NCR 53C8XX and 53C1010 PCI-SCSI drivers
-P:	Matthew Wilcox
-M:	matthew@wil.cx
+M:	Matthew Wilcox <matthew@wil.cx>
 L:	linux-scsi@vger.kernel.org
 S:	Maintained
 F:	drivers/scsi/sym53c8xx_2/
 
 LTP (Linux Test Project)
-P:	Subrata Modak
-M:	subrata@linux.vnet.ibm.com
-P:	Mike Frysinger
-M:	vapier@gentoo.org
+M:	Subrata Modak <subrata@linux.vnet.ibm.com>
+M:	Mike Frysinger <vapier@gentoo.org>
 L:	ltp-list@lists.sourceforge.net (subscribers-only)
 W:	http://ltp.sourceforge.net/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/galak/ltp.git
 S:	Maintained
 
 M32R ARCHITECTURE
-P:	Hirokazu Takata
-M:	takata@linux-m32r.org
+M:	Hirokazu Takata <takata@linux-m32r.org>
 L:	linux-m32r@ml.linux-m32r.org
 L:	linux-m32r-ja@ml.linux-m32r.org (in Japanese)
 W:	http://www.linux-m32r.org/
@@ -3683,10 +3205,8 @@ S:	Maintained
 F:	arch/m32r/
 
 M68K ARCHITECTURE
-P:	Geert Uytterhoeven
-M:	geert@linux-m68k.org
-P:	Roman Zippel
-M:	zippel@linux-m68k.org
+M:	Geert Uytterhoeven <geert@linux-m68k.org>
+M:	Roman Zippel <zippel@linux-m68k.org>
 L:	linux-m68k@lists.linux-m68k.org
 W:	http://www.linux-m68k.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k.git
@@ -3695,23 +3215,20 @@ F:	arch/m68k/
 F:	drivers/zorro/
 
 M68K ON APPLE MACINTOSH
-P:	Joshua Thompson
-M:	funaho@jurai.org
+M:	Joshua Thompson <funaho@jurai.org>
 W:	http://www.mac.linux-m68k.org/
 L:	linux-m68k@lists.linux-m68k.org
 S:	Maintained
 F:	arch/m68k/mac/
 
 M68K ON HP9000/300
-P:	Philip Blundell
-M:	philb@gnu.org
+M:	Philip Blundell <philb@gnu.org>
 W:	http://www.tazenda.demon.co.uk/phil/linux-hp
 S:	Maintained
 F:	arch/m68k/hp300/
 
 MAC80211
-P:	Johannes Berg
-M:	johannes@sipsolutions.net
+M:	Johannes Berg <johannes@sipsolutions.net>
 L:	linux-wireless@vger.kernel.org
 W:	http://linuxwireless.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6.git
@@ -3721,10 +3238,8 @@ F:	include/net/mac80211.h
 F:	net/mac80211/
 
 MAC80211 PID RATE CONTROL
-P:	Stefano Brivio
-M:	stefano.brivio@polimi.it
-P:	Mattias Nissler
-M:	mattias.nissler@gmx.de
+M:	Stefano Brivio <stefano.brivio@polimi.it>
+M:	Mattias Nissler <mattias.nissler@gmx.de>
 L:	linux-wireless@vger.kernel.org
 W:	http://linuxwireless.org/en/developers/Documentation/mac80211/RateControl/PID
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6.git
@@ -3732,67 +3247,57 @@ S:	Maintained
 F:	net/mac80211/rc80211_pid*
 
 MACVLAN DRIVER
-P:	Patrick McHardy
-M:	kaber@trash.net
+M:	Patrick McHardy <kaber@trash.net>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/macvlan.c
 F:	include/linux/if_macvlan.h
 
 MAN-PAGES: MANUAL PAGES FOR LINUX -- Sections 2, 3, 4, 5, and 7
-P:	Michael Kerrisk
-M:	mtk.manpages@gmail.com
+M:	Michael Kerrisk <mtk.manpages@gmail.com>
 W:	http://www.kernel.org/doc/man-pages
 L:	linux-man@vger.kernel.org
 S:	Maintained
 
 MARVELL LIBERTAS WIRELESS DRIVER
-P:	Dan Williams
-M:	dcbw@redhat.com
+M:	Dan Williams <dcbw@redhat.com>
 L:	libertas-dev@lists.infradead.org
 S:	Maintained
 F:	drivers/net/wireless/libertas/
 
 MARVELL MV643XX ETHERNET DRIVER
-P:	Lennert Buytenhek
-M:	buytenh@marvell.com
+M:	Lennert Buytenhek <buytenh@marvell.com>
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/mv643xx_eth.*
 F:	include/linux/mv643xx.h
 
 MARVELL SOC MMC/SD/SDIO CONTROLLER DRIVER
-P:	Nicolas Pitre
-M:	nico@cam.org
+M:	Nicolas Pitre <nico@cam.org>
 S:	Maintained
 
 MARVELL YUKON / SYSKONNECT DRIVER
-P:	Mirko Lindner
-M:	mlindner@syskonnect.de
-P:	Ralph Roesler
-M:	rroesler@syskonnect.de
+M:	Mirko Lindner <mlindner@syskonnect.de>
+M:	Ralph Roesler <rroesler@syskonnect.de>
 W:	http://www.syskonnect.com
 S:	Supported
 
 MATROX FRAMEBUFFER DRIVER
-P:	Petr Vandrovec
-M:	vandrove@vc.cvut.cz
+M:	Petr Vandrovec <vandrove@vc.cvut.cz>
 L:	linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
 S:	Maintained
 F:	drivers/video/matrox/matroxfb_*
 F:	include/linux/matroxfb.h
 
 MAX6650 HARDWARE MONITOR AND FAN CONTROLLER DRIVER
-P:	Hans J. Koch
-M:	hjk@linutronix.de
+M:	"Hans J. Koch" <hjk@linutronix.de>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	Documentation/hwmon/max6650
 F:	drivers/hwmon/max6650.c
 
 MEDIA INPUT INFRASTRUCTURE (V4L/DVB)
-P:	Mauro Carvalho Chehab
-M:	mchehab@infradead.org
+M:	Mauro Carvalho Chehab <mchehab@infradead.org>
 P:	LinuxTV.org Project
 L:	linux-media@vger.kernel.org
 W:	http://linuxtv.org
@@ -3806,8 +3311,7 @@ F:	include/linux/dvb/
 F:	include/linux/videodev*.h
 
 MEGARAID SCSI DRIVERS
-P:	Neela Syam Kolli
-M:	megaraidlinux@lsi.com
+M:	Neela Syam Kolli <megaraidlinux@lsi.com>
 L:	linux-scsi@vger.kernel.org
 W:	http://megaraid.lsilogic.com
 S:	Maintained
@@ -3823,19 +3327,15 @@ F:	include/linux/mm.h
 F:	mm/
 
 MEMORY RESOURCE CONTROLLER
-P:	Balbir Singh
-M:	balbir@linux.vnet.ibm.com
-P:	Pavel Emelyanov
-M:	xemul@openvz.org
-P:	KAMEZAWA Hiroyuki
-M:	kamezawa.hiroyu@jp.fujitsu.com
+M:	Balbir Singh <balbir@linux.vnet.ibm.com>
+M:	Pavel Emelyanov <xemul@openvz.org>
+M:	KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
 L:	linux-mm@kvack.org
 S:	Maintained
 F:	mm/memcontrol.c
 
 MEMORY TECHNOLOGY DEVICES (MTD)
-P:	David Woodhouse
-M:	dwmw2@infradead.org
+M:	David Woodhouse <dwmw2@infradead.org>
 W:	http://www.linux-mtd.infradead.org/
 L:	linux-mtd@lists.infradead.org
 T:	git git://git.infradead.org/mtd-2.6.git
@@ -3845,8 +3345,7 @@ F:	include/linux/mtd/
 F:	include/mtd/
 
 MICROBLAZE ARCHITECTURE
-P:	Michal Simek
-M:	monstr@monstr.eu
+M:	Michal Simek <monstr@monstr.eu>
 L:	microblaze-uclinux@itee.uq.edu.au
 W:	http://www.monstr.eu/fdt/
 T:	git git://git.monstr.eu/linux-2.6-microblaze.git
@@ -3854,14 +3353,12 @@ S:	Supported
 F:	arch/microblaze/
 
 MICROTEK X6 SCANNER
-P:	Oliver Neukum
-M:	oliver@neukum.name
+M:	Oliver Neukum <oliver@neukum.name>
 S:	Maintained
 F:	drivers/usb/image/microtek.*
 
 MIPS
-P:	Ralf Baechle
-M:	ralf@linux-mips.org
+M:	Ralf Baechle <ralf@linux-mips.org>
 W:	http://www.linux-mips.org/
 L:	linux-mips@linux-mips.org
 T:	git git://git.linux-mips.org/pub/scm/linux.git
@@ -3870,8 +3367,7 @@ F:	Documentation/mips/
 F:	arch/mips/
 
 MISCELLANEOUS MCA-SUPPORT
-P:	James Bottomley
-M:	James.Bottomley@HansenPartnership.com
+M:	James Bottomley <James.Bottomley@HansenPartnership.com>
 S:	Maintained
 F:	Documentation/ia64/mca.txt
 F:	Documentation/mca.txt
@@ -3879,15 +3375,13 @@ F:	drivers/mca/
 F:	include/linux/mca*
 
 MODULE SUPPORT
-P:	Rusty Russell
-M:	rusty@rustcorp.com.au
+M:	Rusty Russell <rusty@rustcorp.com.au>
 S:	Maintained
 F:	include/linux/module.h
 F:	kernel/module.c
 
 MOTION EYE VAIO PICTUREBOOK CAMERA DRIVER
-P:	Stelian Pop
-M:	stelian@popies.net
+M:	Stelian Pop <stelian@popies.net>
 W:	http://popies.net/meye/
 S:	Maintained
 F:	Documentation/video4linux/meye.txt
@@ -3895,135 +3389,111 @@ F:	drivers/media/video/meye.*
 F:	include/linux/meye.h
 
 MOTOROLA IMX MMC/SD HOST CONTROLLER INTERFACE DRIVER
-P:	Pavel Pisa
-M:	ppisa@pikron.com
+M:	Pavel Pisa <ppisa@pikron.com>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 F:	drivers/mmc/host/imxmmc.*
 
 MOUSE AND MISC DEVICES [GENERAL]
-P:	Alessandro Rubini
-M:	rubini@ipvvis.unipv.it
+M:	Alessandro Rubini <rubini@ipvvis.unipv.it>
 S:	Maintained
 F:	drivers/input/mouse/
 F:	include/linux/gpio_mouse.h
 
 MOXA SMARTIO/INDUSTIO/INTELLIO SERIAL CARD
-P:	Jiri Slaby
-M:	jirislaby@gmail.com
+M:	Jiri Slaby <jirislaby@gmail.com>
 S:	Maintained
 F:	Documentation/serial/moxa-smartio
 F:	drivers/char/mxser.*
 
 MSI LAPTOP SUPPORT
-P:	Lennart Poettering
-M:	mzxreary@0pointer.de
+M:	Lennart Poettering <mzxreary@0pointer.de>
 W:	https://tango.0pointer.de/mailman/listinfo/s270-linux
 W:	http://0pointer.de/lennart/tchibo.html
 S:	Maintained
 F:	drivers/platform/x86/msi-laptop.c
 
 MULTIFUNCTION DEVICES (MFD)
-P:	Samuel Ortiz
-M:	sameo@linux.intel.com
+M:	Samuel Ortiz <sameo@linux.intel.com>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6.git
 S:	Supported
 F:	drivers/mfd/
 
 MULTIMEDIA CARD (MMC), SECURE DIGITAL (SD) AND SDIO SUBSYSTEM
-P:	Pierre Ossman
-M:	pierre@ossman.eu
-S:	Maintained
+S:	Orphan
 F:	drivers/mmc/
 F:	include/linux/mmc/
 
 MULTIMEDIA CARD (MMC) ETC. OVER SPI
-P:	David Brownell
-M:	dbrownell@users.sourceforge.net
+M:	David Brownell <dbrownell@users.sourceforge.net>
 S:	Odd Fixes
 F:	drivers/mmc/host/mmc_spi.c
 F:	include/linux/spi/mmc_spi.h
 
 MULTISOUND SOUND DRIVER
-P:	Andrew Veliath
-M:	andrewtv@usa.net
+M:	Andrew Veliath <andrewtv@usa.net>
 S:	Maintained
 F:	Documentation/sound/oss/MultiSound
 F:	sound/oss/msnd*
 
 MULTITECH MULTIPORT CARD (ISICOM)
-P:	Jiri Slaby
-M:	jirislaby@gmail.com
+M:	Jiri Slaby <jirislaby@gmail.com>
 S:	Maintained
 F:	drivers/char/isicom.c
 F:	include/linux/isicom.h
 
 MUSB MULTIPOINT HIGH SPEED DUAL-ROLE CONTROLLER
-P:	Felipe Balbi
-M:	felipe.balbi@nokia.com
+M:	Felipe Balbi <felipe.balbi@nokia.com>
 L:	linux-usb@vger.kernel.org
 T:	git git://gitorious.org/musb/mainline.git
 S:	Maintained
 F:	drivers/usb/musb/
 
 MYRICOM MYRI-10G 10GbE DRIVER (MYRI10GE)
-P:	Andrew Gallatin
-M:	gallatin@myri.com
-P:	Brice Goglin
-M:	brice@myri.com
+M:	Andrew Gallatin <gallatin@myri.com>
+M:	Brice Goglin <brice@myri.com>
 L:	netdev@vger.kernel.org
 W:	http://www.myri.com/scs/download-Myri10GE.html
 S:	Supported
 F:	drivers/net/myri10ge/
 
 NATSEMI ETHERNET DRIVER (DP8381x)
-P:	Tim Hockin
-M:	thockin@hockin.org
+M:	Tim Hockin <thockin@hockin.org>
 S:	Maintained
 F:	drivers/net/natsemi.c
 
 NCP FILESYSTEM
-P:	Petr Vandrovec
-M:	vandrove@vc.cvut.cz
+M:	Petr Vandrovec <vandrove@vc.cvut.cz>
 L:	linware@sh.cvut.cz
 S:	Maintained
 F:	fs/ncpfs/
 
 NCR DUAL 700 SCSI DRIVER (MICROCHANNEL)
-P:	James E.J. Bottomley
-M:	James.Bottomley@HansenPartnership.com
+M:	"James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
 L:	linux-scsi@vger.kernel.org
 S:	Maintained
 F:	drivers/scsi/NCR_D700.*
 
 NETEFFECT IWARP RNIC DRIVER (IW_NES)
-P:	Faisal Latif
-M:	faisal.latif@intel.com
-P:	Chien Tung
-M:	chien.tin.tung@intel.com
+M:	Faisal Latif <faisal.latif@intel.com>
+M:	Chien Tung <chien.tin.tung@intel.com>
 L:	general@lists.openfabrics.org
 W:	http://www.neteffect.com
 S:	Supported
 F:	drivers/infiniband/hw/nes/
 
 NETEM NETWORK EMULATOR
-P:	Stephen Hemminger
-M:	shemminger@linux-foundation.org
+M:	Stephen Hemminger <shemminger@linux-foundation.org>
 L:	netem@lists.linux-foundation.org
 S:	Maintained
 F:	net/sched/sch_netem.c
 
 NETERION (S2IO) 10GbE DRIVER (xframe/vxge)
-P:	Ramkrishna Vepa
-M:	ram.vepa@neterion.com
-P:	Rastapur Santosh
-M:	santosh.rastapur@neterion.com
-P:	Sivakumar Subramani
-M:	sivakumar.subramani@neterion.com
-P:	Sreenivasa Honnur
-M:	sreenivasa.honnur@neterion.com
-P:	Anil Murthy
-M:	anil.murthy@neterion.com
+M:	Ramkrishna Vepa <ram.vepa@neterion.com>
+M:	Rastapur Santosh <santosh.rastapur@neterion.com>
+M:	Sivakumar Subramani <sivakumar.subramani@neterion.com>
+M:	Sreenivasa Honnur <sreenivasa.honnur@neterion.com>
+M:	Anil Murthy <anil.murthy@neterion.com>
 L:	netdev@vger.kernel.org
 W:	http://trac.neterion.com/cgi-bin/trac.cgi/wiki/Linux?Anonymous
 W:	http://trac.neterion.com/cgi-bin/trac.cgi/wiki/X3100Linux?Anonymous
@@ -4037,13 +3507,13 @@ P:	Marc Boucher
 P:	James Morris
 P:	Harald Welte
 P:	Jozsef Kadlecsik
-P:	Patrick McHardy
-M:	kaber@trash.net
+M:	Patrick McHardy <kaber@trash.net>
 L:	netfilter-devel@vger.kernel.org
 L:	netfilter@vger.kernel.org
 L:	coreteam@netfilter.org
 W:	http://www.netfilter.org/
 W:	http://www.iptables.org/
+T:	git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-2.6.git
 S:	Supported
 F:	include/linux/netfilter*
 F:	include/linux/netfilter/
@@ -4053,8 +3523,7 @@ F:	net/*/netfilter/
 F:	net/netfilter/
 
 NETLABEL
-P:	Paul Moore
-M:	paul.moore@hp.com
+M:	Paul Moore <paul.moore@hp.com>
 W:	http://netlabel.sf.net
 L:	netdev@vger.kernel.org
 S:	Supported
@@ -4063,8 +3532,7 @@ F:	include/net/netlabel.h
 F:	net/netlabel/
 
 NETROM NETWORK LAYER
-P:	Ralf Baechle
-M:	ralf@linux-mips.org
+M:	Ralf Baechle <ralf@linux-mips.org>
 L:	linux-hams@vger.kernel.org
 W:	http://www.linux-ax25.org/
 S:	Maintained
@@ -4073,16 +3541,14 @@ F:	include/net/netrom.h
 F:	net/netrom/
 
 NETWORK BLOCK DEVICE (NBD)
-P:	Paul Clements
-M:	Paul.Clements@steeleye.com
+M:	Paul Clements <Paul.Clements@steeleye.com>
 S:	Maintained
 F:	Documentation/blockdev/nbd.txt
 F:	drivers/block/nbd.c
 F:	include/linux/nbd.h
 
 NETWORKING [GENERAL]
-P:	David S. Miller
-M:	davem@davemloft.net
+M:	"David S. Miller" <davem@davemloft.net>
 L:	netdev@vger.kernel.org
 W:	http://www.linuxfoundation.org/en/Net
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.git
@@ -4091,18 +3557,12 @@ F:	net/
 F:	include/net/
 
 NETWORKING [IPv4/IPv6]
-P:	David S. Miller
-M:	davem@davemloft.net
-P:	Alexey Kuznetsov
-M:	kuznet@ms2.inr.ac.ru
-P:	Pekka Savola (ipv6)
-M:	pekkas@netcore.fi
-P:	James Morris
-M:	jmorris@namei.org
-P:	Hideaki YOSHIFUJI
-M:	yoshfuji@linux-ipv6.org
-P:	Patrick McHardy
-M:	kaber@trash.net
+M:	"David S. Miller" <davem@davemloft.net>
+M:	Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
+M:	"Pekka Savola (ipv6)" <pekkas@netcore.fi>
+M:	James Morris <jmorris@namei.org>
+M:	Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
+M:	Patrick McHardy <kaber@trash.net>
 L:	netdev@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.git
 S:	Maintained
@@ -4111,14 +3571,12 @@ F:	net/ipv6/
 F:	include/net/ip*
 
 NETWORKING [LABELED] (NetLabel, CIPSO, Labeled IPsec, SECMARK)
-P:	Paul Moore
-M:	paul.moore@hp.com
+M:	Paul Moore <paul.moore@hp.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
 
 NETWORKING [WIRELESS]
-P:	John W. Linville
-M:	linville@tuxdriver.com
+M:	"John W. Linville" <linville@tuxdriver.com>
 L:	linux-wireless@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6.git
 S:	Maintained
@@ -4134,16 +3592,14 @@ S:	Odd Fixes
 F:	drivers/net/
 
 NETXEN (1/10) GbE SUPPORT
-P:	Dhananjay Phadke
-M:	dhananjay@netxen.com
+M:	Dhananjay Phadke <dhananjay@netxen.com>
 L:	netdev@vger.kernel.org
 W:	http://www.netxen.com
 S:	Supported
 F:	drivers/net/netxen/
 
 NFS, SUNRPC, AND LOCKD CLIENTS
-P:	Trond Myklebust
-M:	Trond.Myklebust@netapp.com
+M:	Trond Myklebust <Trond.Myklebust@netapp.com>
 L:	linux-nfs@vger.kernel.org
 W:	http://client.linux-nfs.org
 T:	git git://git.linux-nfs.org/pub/linux/nfs-2.6.git
@@ -4157,17 +3613,14 @@ F:	include/linux/nfs*
 F:	include/linux/sunrpc/
 
 NI5010 NETWORK DRIVER
-P:	Jan-Pascal van Best
-M:	janpascal@vanbest.org
-P:	Andreas Mohr
-M:	andi@lisas.de
+M:	Jan-Pascal van Best <janpascal@vanbest.org>
+M:	Andreas Mohr <andi@lisas.de>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/ni5010.*
 
 NILFS2 FILESYSTEM
-P:	KONISHI Ryusuke
-M:	konishi.ryusuke@lab.ntt.co.jp
+M:	KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp>
 L:	users@nilfs.org
 W:	http://www.nilfs.org/en/
 S:	Supported
@@ -4176,26 +3629,22 @@ F:	fs/nilfs2/
 F:	include/linux/nilfs2_fs.h
 
 NINJA SCSI-3 / NINJA SCSI-32Bi (16bit/CardBus) PCMCIA SCSI HOST ADAPTER DRIVER
-P:	YOKOTA Hiroshi
-M:	yokota@netlab.is.tsukuba.ac.jp
+M:	YOKOTA Hiroshi <yokota@netlab.is.tsukuba.ac.jp>
 W:	http://www.netlab.is.tsukuba.ac.jp/~yokota/izumi/ninja/
 S:	Maintained
 F:	Documentation/scsi/NinjaSCSI.txt
 F:	drivers/scsi/pcmcia/nsp_*
 
 NINJA SCSI-32Bi/UDE PCI/CARDBUS SCSI HOST ADAPTER DRIVER
-P:	GOTO Masanori
-M:	gotom@debian.or.jp
-P:	YOKOTA Hiroshi
-M:	yokota@netlab.is.tsukuba.ac.jp
+M:	GOTO Masanori <gotom@debian.or.jp>
+M:	YOKOTA Hiroshi <yokota@netlab.is.tsukuba.ac.jp>
 W:	http://www.netlab.is.tsukuba.ac.jp/~yokota/izumi/ninja/
 S:	Maintained
 F:	Documentation/scsi/NinjaSCSI.txt
 F:	drivers/scsi/nsp32*
 
 NTFS FILESYSTEM
-P:	Anton Altaparmakov
-M:	aia21@cantab.net
+M:	Anton Altaparmakov <aia21@cantab.net>
 L:	linux-ntfs-dev@lists.sourceforge.net
 W:	http://www.linux-ntfs.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/aia21/ntfs-2.6.git
@@ -4204,16 +3653,14 @@ F:	Documentation/filesystems/ntfs.txt
 F:	fs/ntfs/
 
 NVIDIA (rivafb and nvidiafb) FRAMEBUFFER DRIVER
-P:	Antonino Daplas
-M:	adaplas@gmail.com
+M:	Antonino Daplas <adaplas@gmail.com>
 L:	linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
 S:	Maintained
 F:	drivers/video/riva/
 F:	drivers/video/nvidia/
 
 OMAP SUPPORT
-P:	Tony Lindgren <tony@atomide.com>
-M:	tony@atomide.com
+M:	"Tony Lindgren <tony@atomide.com>" <tony@atomide.com>
 L:	linux-omap@vger.kernel.org
 W:	http://www.muru.com/linux/omap/
 W:	http://linux.omap.com/
@@ -4222,98 +3669,83 @@ S:	Maintained
 F:	arch/arm/*omap*
 
 OMAP CLOCK FRAMEWORK SUPPORT
-P:	Paul Walmsley
-M:	paul@pwsan.com
+M:	Paul Walmsley <paul@pwsan.com>
 L:	linux-omap@vger.kernel.org
 S:	Maintained
 F:	arch/arm/*omap*/*clock*
 
 OMAP POWER MANAGEMENT SUPPORT
-P:	Kevin Hilman
-M:	khilman@deeprootsystems.com
+M:	Kevin Hilman <khilman@deeprootsystems.com>
 L:	linux-omap@vger.kernel.org
 S:	Maintained
 F:	arch/arm/*omap*/*pm*
 
 OMAP AUDIO SUPPORT
-P:	Jarkko Nikula
-M:	jhnikula@gmail.com
+M:	Jarkko Nikula <jhnikula@gmail.com>
 L:	alsa-devel@alsa-project.org (subscribers-only)
 L:	linux-omap@vger.kernel.org
 S:	Maintained
 F:	sound/soc/omap/
 
 OMAP FRAMEBUFFER SUPPORT
-P:	Imre Deak
-M:	imre.deak@nokia.com
+M:	Imre Deak <imre.deak@nokia.com>
 L:	linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
 L:	linux-omap@vger.kernel.org
 S:	Maintained
 F:	drivers/video/omap/
 
 OMAP MMC SUPPORT
-P:	Jarkko Lavinen
-M:	jarkko.lavinen@nokia.com
-L:	linux-kernel@vger.kernel.org
+M:	Jarkko Lavinen <jarkko.lavinen@nokia.com>
 L:	linux-omap@vger.kernel.org
 S:	Maintained
 F:	drivers/mmc/host/*omap*
 
 OMAP RANDOM NUMBER GENERATOR SUPPORT
-P:	Deepak Saxena
-M:	dsaxena@plexity.net
+M:	Deepak Saxena <dsaxena@plexity.net>
 S:	Maintained
 F:	drivers/char/hw_random/omap-rng.c
 
 OMAP USB SUPPORT
-P:	Felipe Balbi
-M:	felipe.balbi@nokia.com
-P:	David Brownell
-M:	dbrownell@users.sourceforge.net
+M:	Felipe Balbi <felipe.balbi@nokia.com>
+M:	David Brownell <dbrownell@users.sourceforge.net>
 L:	linux-usb@vger.kernel.org
 L:	linux-omap@vger.kernel.org
 S:	Maintained
 
 OMFS FILESYSTEM
-P:	Bob Copeland
-M:	me@bobcopeland.com
+M:	Bob Copeland <me@bobcopeland.com>
 L:	linux-karma-devel@lists.sourceforge.net
 S:	Maintained
 F:	Documentation/filesystems/omfs.txt
 F:	fs/omfs/
 
 OMNIKEY CARDMAN 4000 DRIVER
-P:	Harald Welte
-M:	laforge@gnumonks.org
+M:	Harald Welte <laforge@gnumonks.org>
 S:	Maintained
 F:	drivers/char/pcmcia/cm4000_cs.c
 F:	include/linux/cm4000_cs.h
 
 OMNIKEY CARDMAN 4040 DRIVER
-P:	Harald Welte
-M:	laforge@gnumonks.org
+M:	Harald Welte <laforge@gnumonks.org>
 S:	Maintained
 F:	drivers/char/pcmcia/cm4040_cs.*
 
 OMNIVISION OV7670 SENSOR DRIVER
-P:	Jonathan Corbet
-M:	corbet@lwn.net
+M:	Jonathan Corbet <corbet@lwn.net>
 L:	linux-media@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
 S:	Maintained
 F:	drivers/media/video/ov7670.c
 
 ONENAND FLASH DRIVER
-P:	Kyungmin Park
-M:	kyungmin.park@samsung.com
+M:	Kyungmin Park <kyungmin.park@samsung.com>
 L:	linux-mtd@lists.infradead.org
 S:	Maintained
 F:	drivers/mtd/onenand/
 F:	include/linux/mtd/onenand*.h
 
 ONSTREAM SCSI TAPE DRIVER
-P:	Willem Riede
-M:	osst@riede.org
+M:	Willem Riede <osst@riede.org>
 L:	osst-users@lists.sourceforge.net
 L:	linux-scsi@vger.kernel.org
 S:	Maintained
@@ -4321,16 +3753,14 @@ F:	drivers/scsi/osst*
 F:	drivers/scsi/st*
 
 OPENCORES I2C BUS DRIVER
-P:	Peter Korsgaard
-M:	jacmet@sunsite.dk
+M:	Peter Korsgaard <jacmet@sunsite.dk>
 L:	linux-i2c@vger.kernel.org
 S:	Maintained
 F:	Documentation/i2c/busses/i2c-ocores
 F:	drivers/i2c/busses/i2c-ocores.c
 
 OPROFILE
-P:	Robert Richter
-M:	robert.richter@amd.com
+M:	Robert Richter <robert.richter@amd.com>
 L:	oprofile-list@lists.sf.net
 S:	Maintained
 F:	arch/*/oprofile/
@@ -4338,10 +3768,8 @@ F:	drivers/oprofile/
 F:	include/linux/oprofile.h
 
 ORACLE CLUSTER FILESYSTEM 2 (OCFS2)
-P:	Mark Fasheh
-M:	mfasheh@suse.com
-P:	Joel Becker
-M:	joel.becker@oracle.com
+M:	Mark Fasheh <mfasheh@suse.com>
+M:	Joel Becker <joel.becker@oracle.com>
 L:	ocfs2-devel@oss.oracle.com (moderated for non-subscribers)
 W:	http://oss.oracle.com/projects/ocfs2/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2.git
@@ -4351,10 +3779,8 @@ F:	Documentation/filesystems/dlmfs.txt
 F:	fs/ocfs2/
 
 ORINOCO DRIVER
-P:	Pavel Roskin
-M:	proski@gnu.org
-P:	David Gibson
-M:	hermes@gibson.dropbear.id.au
+M:	Pavel Roskin <proski@gnu.org>
+M:	David Gibson <hermes@gibson.dropbear.id.au>
 L:	linux-wireless@vger.kernel.org
 L:	orinoco-users@lists.sourceforge.net
 L:	orinoco-devel@lists.sourceforge.net
@@ -4362,19 +3788,19 @@ W:	http://www.nongnu.org/orinoco/
 S:	Maintained
 F:	drivers/net/wireless/orinoco/
 
-OSD LIBRARY
-P:	Boaz Harrosh
-M:	bharrosh@panasas.com
-P:	Benny Halevy
-M:	bhalevy@panasas.com
+OSD LIBRARY and FILESYSTEM
+M:	Boaz Harrosh <bharrosh@panasas.com>
+M:	Benny Halevy <bhalevy@panasas.com>
 L:	osd-dev@open-osd.org
 W:	http://open-osd.org
 T:	git git://git.open-osd.org/open-osd.git
 S:	Maintained
+F:	drivers/scsi/osd/
+F:	drivers/include/scsi/osd_*
+F:	fs/exofs/
 
 P54 WIRELESS DRIVER
-P:	Michael Wu
-M:	flamingice@sourmilk.net
+M:	Michael Wu <flamingice@sourmilk.net>
 L:	linux-wireless@vger.kernel.org
 W:	http://prism54.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mwu/mac80211-drivers.git
@@ -4382,30 +3808,25 @@ S:	Maintained
 F:	drivers/net/wireless/p54/
 
 PA SEMI ETHERNET DRIVER
-P:	Olof Johansson
-M:	olof@lixom.net
+M:	Olof Johansson <olof@lixom.net>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/pasemi_mac.*
 
 PA SEMI SMBUS DRIVER
-P:	Olof Johansson
-M:	olof@lixom.net
+M:	Olof Johansson <olof@lixom.net>
 L:	linux-i2c@vger.kernel.org
 S:	Maintained
 F:	drivers/i2c/busses/i2c-pasemi.c
 
 PANASONIC LAPTOP ACPI EXTRAS DRIVER
-P:	Harald Welte
-M:	laforge@gnumonks.org
+M:	Harald Welte <laforge@gnumonks.org>
 S:	Maintained
 F:	drivers/platform/x86/panasonic-laptop.c
 
 PANASONIC MN10300/AM33 PORT
-P:	David Howells
-M:	dhowells@redhat.com
-P:	Koichi Yasutake
-M:	yasutake.koichi@jp.panasonic.com
+M:	David Howells <dhowells@redhat.com>
+M:	Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
 L:	linux-am33-list@redhat.com (moderated for non-subscribers)
 W:	ftp://ftp.redhat.com/pub/redhat/gnupro/AM33/
 S:	Maintained
@@ -4421,14 +3842,10 @@ F:	drivers/char/ppdev.c
 F:	include/linux/ppdev.h
 
 PARAVIRT_OPS INTERFACE
-P:	Jeremy Fitzhardinge
-M:	jeremy@xensource.com
-P:	Chris Wright
-M:	chrisw@sous-sol.org
-P:	Alok Kataria
-M:	akataria@vmware.com
-P:	Rusty Russell
-M:	rusty@rustcorp.com.au
+M:	Jeremy Fitzhardinge <jeremy@xensource.com>
+M:	Chris Wright <chrisw@sous-sol.org>
+M:	Alok Kataria <akataria@vmware.com>
+M:	Rusty Russell <rusty@rustcorp.com.au>
 L:	virtualization@lists.osdl.org
 S:	Supported
 F:	Documentation/ia64/paravirt_ops.txt
@@ -4436,8 +3853,7 @@ F:	arch/*/kernel/paravirt*
 F:	arch/*/include/asm/paravirt.h
 
 PARIDE DRIVERS FOR PARALLEL PORT IDE DEVICES
-P:	Tim Waugh
-M:	tim@cyberelk.net
+M:	Tim Waugh <tim@cyberelk.net>
 L:	linux-parport@lists.infradead.org (subscribers-only)
 W:	http://www.torque.net/linux-pp.html
 S:	Maintained
@@ -4445,10 +3861,8 @@ F:	Documentation/blockdev/paride.txt
 F:	drivers/block/paride/
 
 PARISC ARCHITECTURE
-P:	Kyle McMartin
-M:	kyle@mcmartin.ca
-P:	Helge Deller
-M:	deller@gmx.de
+M:	Kyle McMartin <kyle@mcmartin.ca>
+M:	Helge Deller <deller@gmx.de>
 L:	linux-parisc@vger.kernel.org
 W:	http://www.parisc-linux.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6.git
@@ -4457,37 +3871,32 @@ F:	arch/parisc/
 F:	drivers/parisc/
 
 PC87360 HARDWARE MONITORING DRIVER
-P:	Jim Cromie
-M:	jim.cromie@gmail.com
+M:	Jim Cromie <jim.cromie@gmail.com>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	Documentation/hwmon/pc87360
 F:	drivers/hwmon/pc87360.c
 
 PC8736x GPIO DRIVER
-P:	Jim Cromie
-M:	jim.cromie@gmail.com
+M:	Jim Cromie <jim.cromie@gmail.com>
 S:	Maintained
 F:	drivers/char/pc8736x_gpio.c
 
 PCA9532 LED DRIVER
-P:	Riku Voipio
-M:	riku.voipio@iki.fi
+M:	Riku Voipio <riku.voipio@iki.fi>
 S:	Maintained
 F:	drivers/leds/leds-pca9532.c
 F:	include/linux/leds-pca9532.h
 
 PCI ERROR RECOVERY
-P:	Linas Vepstas
-M:	linas@austin.ibm.com
+M:	Linas Vepstas <linas@austin.ibm.com>
 L:	linux-pci@vger.kernel.org
 S:	Supported
 F:	Documentation/PCI/pci-error-recovery.txt
 F:	Documentation/powerpc/eeh-pci-error-recovery.txt
 
 PCI SUBSYSTEM
-P:	Jesse Barnes
-M:	jbarnes@virtuousgeek.org
+M:	Jesse Barnes <jbarnes@virtuousgeek.org>
 L:	linux-pci@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6.git
 S:	Supported
@@ -4496,8 +3905,7 @@ F:	drivers/pci/
 F:	include/linux/pci*
 
 PCIE HOTPLUG DRIVER
-P:	Kristen Carlson Accardi
-M:	kristen.c.accardi@intel.com
+M:	Kristen Carlson Accardi <kristen.c.accardi@intel.com>
 L:	linux-pci@vger.kernel.org
 S:	Supported
 F:	drivers/pci/pcie/
@@ -4513,121 +3921,103 @@ F:	drivers/pcmcia/
 F:	include/pcmcia/
 
 PCNET32 NETWORK DRIVER
-P:	Don Fry
-M:	pcnet32@verizon.net
+M:	Don Fry <pcnet32@verizon.net>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/pcnet32.c
 
 PER-TASK DELAY ACCOUNTING
-P:	Balbir Singh
-M:	balbir@linux.vnet.ibm.com
+M:	Balbir Singh <balbir@linux.vnet.ibm.com>
 S:	Maintained
 F:	include/linux/delayacct.h
 F:	kernel/delayacct.c
 
 PERFORMANCE COUNTER SUBSYSTEM
-P:	Peter Zijlstra
-M:	a.p.zijlstra@chello.nl
-P:	Paul Mackerras
-M:	paulus@samba.org
-P:	Ingo Molnar
-M:	mingo@elte.hu
-L:	linux-kernel@vger.kernel.org
+M:	Peter Zijlstra <a.p.zijlstra@chello.nl>
+M:	Paul Mackerras <paulus@samba.org>
+M:	Ingo Molnar <mingo@elte.hu>
 S:	Supported
 
 PERSONALITY HANDLING
-P:	Christoph Hellwig
-M:	hch@infradead.org
+M:	Christoph Hellwig <hch@infradead.org>
 L:	linux-abi-devel@lists.sourceforge.net
 S:	Maintained
 F:	include/linux/personality.h
 
 PHRAM MTD DRIVER
-P:	Joern Engel
-M:	joern@lazybastard.org
+M:	Joern Engel <joern@lazybastard.org>
 L:	linux-mtd@lists.infradead.org
 S:	Maintained
 F:	drivers/mtd/devices/phram.c
 
 PKTCDVD DRIVER
-P:	Peter Osterlund
-M:	petero2@telia.com
+M:	Peter Osterlund <petero2@telia.com>
 S:	Maintained
 F:	drivers/block/pktcdvd.c
 F:	include/linux/pktcdvd.h
 
 POSIX CLOCKS and TIMERS
-P:	Thomas Gleixner
-M:	tglx@linutronix.de
+M:	Thomas Gleixner <tglx@linutronix.de>
 S:	Supported
 F:	fs/timerfd.c
 F:	include/linux/timer*
 F:	kernel/*timer*
 
 POWER SUPPLY CLASS/SUBSYSTEM and DRIVERS
-P:	Anton Vorontsov
-M:	cbou@mail.ru
-P:	David Woodhouse
-M:	dwmw2@infradead.org
+M:	Anton Vorontsov <cbou@mail.ru>
+M:	David Woodhouse <dwmw2@infradead.org>
 T:	git git://git.infradead.org/battery-2.6.git
 S:	Maintained
 F:	include/linux/power_supply.h
 F:	drivers/power/power_supply*
 
 PNP SUPPORT
-P:	Adam Belay
-M:	abelay@mit.edu
-P:	Bjorn Helgaas
-M:	bjorn.helgaas@hp.com
+M:	Adam Belay <abelay@mit.edu>
+M:	Bjorn Helgaas <bjorn.helgaas@hp.com>
 S:	Maintained
 F:	drivers/pnp/
 
 PNXxxxx I2C DRIVER
-P:	Vitaly Wool
-M:	vitalywool@gmail.com
+M:	Vitaly Wool <vitalywool@gmail.com>
 L:	linux-i2c@vger.kernel.org
 S:	Maintained
 F:	drivers/i2c/busses/i2c-pnx.c
 
 PPP PROTOCOL DRIVERS AND COMPRESSORS
-P:	Paul Mackerras
-M:	paulus@samba.org
+M:	Paul Mackerras <paulus@samba.org>
 L:	linux-ppp@vger.kernel.org
 S:	Maintained
 F:	drivers/net/ppp_*
 
 PPP OVER ATM (RFC 2364)
-P:	Mitchell Blank Jr
-M:	mitch@sfgoth.com
+M:	Mitchell Blank Jr <mitch@sfgoth.com>
 S:	Maintained
 F:	net/atm/pppoatm.c
 F:	include/linux/atmppp.h
 
 PPP OVER ETHERNET
-P:	Michal Ostrowski
-M:	mostrows@earthlink.net
+M:	Michal Ostrowski <mostrows@earthlink.net>
 S:	Maintained
 F:	drivers/net/pppoe.c
 F:	drivers/net/pppox.c
 
 PPP OVER L2TP
-P:	James Chapman
-M:	jchapman@katalix.com
+M:	James Chapman <jchapman@katalix.com>
 S:	Maintained
 F:	drivers/net/pppol2tp.c
 F:	include/linux/if_pppol2tp.h
 
 PPS SUPPORT
-P:	Rodolfo Giometti
-M:	giometti@enneenne.com
+M:	Rodolfo Giometti <giometti@enneenne.com>
 W:	http://wiki.enneenne.com/index.php/LinuxPPS_support
 L:	linuxpps@ml.enneenne.com (subscribers-only)
 S:	Maintained
+F:	Documentation/pps/
+F:	drivers/pps/
+F:	include/linux/pps*.h
 
 PREEMPTIBLE KERNEL
-P:	Robert Love
-M:	rml@tech9.net
+M:	Robert Love <rml@tech9.net>
 L:	kpreempt-tech@lists.sourceforge.net
 W:	ftp://ftp.kernel.org/pub/linux/kernel/people/rml/preempt-kernel
 S:	Supported
@@ -4635,37 +4025,32 @@ F:	Documentation/preempt-locking.txt
 F:	include/linux/preempt.h
 
 PRISM54 WIRELESS DRIVER
-P:	Luis R. Rodriguez
-M:	mcgrof@gmail.com
+M:	"Luis R. Rodriguez" <mcgrof@gmail.com>
 L:	linux-wireless@vger.kernel.org
 W:	http://prism54.org
 S:	Maintained
 F:	drivers/net/wireless/prism54/
 
 PROMISE DC4030 CACHING DISK CONTROLLER DRIVER
-P:	Peter Denison
-M:	promise@pnd-pc.demon.co.uk
+M:	Peter Denison <promise@pnd-pc.demon.co.uk>
 W:	http://www.pnd-pc.demon.co.uk/promise/
 S:	Maintained
 
 PROMISE SATA TX2/TX4 CONTROLLER LIBATA DRIVER
-P:	Mikael Pettersson
-M:	mikpe@it.uu.se
+M:	Mikael Pettersson <mikpe@it.uu.se>
 L:	linux-ide@vger.kernel.org
 S:	Maintained
 F:	drivers/ata/sata_promise.*
 
 PS3 NETWORK SUPPORT
-P:	Geoff Levand
-M:	geoffrey.levand@am.sony.com
+M:	Geoff Levand <geoffrey.levand@am.sony.com>
 L:	netdev@vger.kernel.org
 L:	cbe-oss-dev@ozlabs.org
 S:	Supported
 F:	drivers/net/ps3_gelic_net.*
 
 PS3 PLATFORM SUPPORT
-P:	Geoff Levand
-M:	geoffrey.levand@am.sony.com
+M:	Geoff Levand <geoffrey.levand@am.sony.com>
 L:	linuxppc-dev@ozlabs.org
 L:	cbe-oss-dev@ozlabs.org
 S:	Supported
@@ -4680,16 +4065,13 @@ F:	drivers/usb/host/*ps3.c
 F:	sound/ppc/snd_ps3*
 
 PS3VRAM DRIVER
-P:	Jim Paris
-M:	jim@jtan.com
+M:	Jim Paris <jim@jtan.com>
 L:	cbe-oss-dev@ozlabs.org
 S:	Maintained
 
 PTRACE SUPPORT
-P:	Roland McGrath
-M:	roland@redhat.com
-P:	Oleg Nesterov
-M:	oleg@redhat.com
+M:	Roland McGrath <roland@redhat.com>
+M:	Oleg Nesterov <oleg@redhat.com>
 S:	Maintained
 F:	include/asm-generic/syscall.h
 F:	include/linux/ptrace.h
@@ -4698,8 +4080,7 @@ F:	include/linux/tracehook.h
 F:	kernel/ptrace.c
 
 PVRUSB2 VIDEO4LINUX DRIVER
-P:	Mike Isely
-M:	isely@pobox.com
+M:	Mike Isely <isely@pobox.com>
 L:	pvrusb2@isely.net	(subscribers-only)
 L:	linux-media@vger.kernel.org
 W:	http://www.isely.net/pvrusb2/
@@ -4709,10 +4090,8 @@ F:	Documentation/video4linux/README.pvrusb2
 F:	drivers/media/video/pvrusb2/
 
 PXA2xx/PXA3xx SUPPORT
-P:	Eric Miao
-M:	eric.y.miao@gmail.com
-P:	Russell King
-M:	linux@arm.linux.org.uk
+M:	Eric Miao <eric.y.miao@gmail.com>
+M:	Russell King <linux@arm.linux.org.uk>
 L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
 S:	Maintained
 F:	arch/arm/mach-pxa/
@@ -4724,17 +4103,14 @@ F:	sound/arm/pxa*
 F:	sound/soc/pxa
 
 PXA168 SUPPORT
-P:	Eric Miao
-M:	eric.y.miao@gmail.com
-P:	Jason Chagas
-M:	jason.chagas@marvell.com
+M:	Eric Miao <eric.y.miao@gmail.com>
+M:	Jason Chagas <jason.chagas@marvell.com>
 L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6.git
 S:	Maintained
 
 PXA910 SUPPORT
-P:	Eric Miao
-M:	eric.y.miao@gmail.com
+M:	Eric Miao <eric.y.miao@gmail.com>
 L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6.git
 S:	Maintained
@@ -4743,13 +4119,12 @@ PXA MMCI DRIVER
 S:	Orphan
 
 PXA RTC DRIVER
-P:	Robert Jarzmik
-M:	robert.jarzmik@free.fr
+M:	Robert Jarzmik <robert.jarzmik@free.fr>
 L:	rtc-linux@googlegroups.com
 S:	Maintained
 
 QLOGIC QLA2XXX FC-SCSI DRIVER
-P:	Andrew Vasquez
+M:	Andrew Vasquez <andrew.vasquez@qlogic.com>
 M:	linux-driver@qlogic.com
 L:	linux-scsi@vger.kernel.org
 S:	Supported
@@ -4757,7 +4132,7 @@ F:	Documentation/scsi/LICENSE.qla2xxx
 F:	drivers/scsi/qla2xxx/
 
 QLOGIC QLA3XXX NETWORK DRIVER
-P:	Ron Mercer
+M:	Ron Mercer <ron.mercer@qlogic.com>
 M:	linux-driver@qlogic.com
 L:	netdev@vger.kernel.org
 S:	Supported
@@ -4765,16 +4140,14 @@ F:	Documentation/networking/LICENSE.qla3xxx
 F:	drivers/net/qla3xxx.*
 
 QLOGIC QLGE 10Gb ETHERNET DRIVER
-P:	Ron Mercer
+M:	Ron Mercer <ron.mercer@qlogic.com>
 M:	linux-driver@qlogic.com
-M:	ron.mercer@qlogic.com
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/qlge/
 
 QNX4 FILESYSTEM
-P:	Anders Larsen
-M:	al@alarsen.net
+M:	Anders Larsen <al@alarsen.net>
 W:	http://www.alarsen.net/linux/qnx4fs/
 S:	Maintained
 F:	fs/qnx4/
@@ -4782,16 +4155,14 @@ F:	include/linux/qnx4_fs.h
 F:	include/linux/qnxtypes.h
 
 RADEON FRAMEBUFFER DISPLAY DRIVER
-P:	Benjamin Herrenschmidt
-M:	benh@kernel.crashing.org
+M:	Benjamin Herrenschmidt <benh@kernel.crashing.org>
 L:	linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
 S:	Maintained
 F:	drivers/video/aty/radeon*
 F:	include/linux/radeonfb.h
 
 RAGE128 FRAMEBUFFER DISPLAY DRIVER
-P:	Paul Mackerras
-M:	paulus@samba.org
+M:	Paul Mackerras <paulus@samba.org>
 L:	linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
 S:	Maintained
 F:	drivers/video/aty/aty128fb.c
@@ -4806,64 +4177,53 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git
 F:	drivers/net/wireless/rt2x00/
 
 RAMDISK RAM BLOCK DEVICE DRIVER
-P:	Nick Piggin
-M:	npiggin@suse.de
+M:	Nick Piggin <npiggin@suse.de>
 S:	Maintained
 F:	Documentation/blockdev/ramdisk.txt
 F:	drivers/block/brd.c
 
 RANDOM NUMBER DRIVER
-P:	Matt Mackall
-M:	mpm@selenic.com
+M:	Matt Mackall <mpm@selenic.com>
 S:	Maintained
 F:	drivers/char/random.c
 
 RAPIDIO SUBSYSTEM
-P:	Matt Porter
-M:	mporter@kernel.crashing.org
+M:	Matt Porter <mporter@kernel.crashing.org>
 S:	Maintained
 F:	drivers/rapidio/
 
 RAYLINK/WEBGEAR 802.11 WIRELESS LAN DRIVER
-P:	Corey Thomas
-M:	coreythomas@charter.net
+M:	Corey Thomas <coreythomas@charter.net>
 L:	linux-wireless@vger.kernel.org
 S:	Maintained
 F:	drivers/net/wireless/ray*
 
 RCUTORTURE MODULE
-P:	Josh Triplett
-M:	josh@freedesktop.org
-P:	Paul E. McKenney
-M:	paulmck@linux.vnet.ibm.com
+M:	Josh Triplett <josh@freedesktop.org>
+M:	"Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
 S:	Maintained
 F:	Documentation/RCU/torture.txt
 F:	kernel/rcutorture.c
 
 RDC R-321X SoC
-P:	Florian Fainelli
-M:	florian@openwrt.org
+M:	Florian Fainelli <florian@openwrt.org>
 S:	Maintained
 
 RDC R6040 FAST ETHERNET DRIVER
-P:	Florian Fainelli
-M:	florian@openwrt.org
+M:	Florian Fainelli <florian@openwrt.org>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/r6040.c
 
 RDS - RELIABLE DATAGRAM SOCKETS
-P:	Andy Grover
-M:	andy.grover@oracle.com
+M:	Andy Grover <andy.grover@oracle.com>
 L:	rds-devel@oss.oracle.com (moderated for non-subscribers)
 S:	Supported
 F:	net/rds/
 
 READ-COPY UPDATE (RCU)
-P:	Dipankar Sarma
-M:	dipankar@in.ibm.com
-P:	Paul E. McKenney
-M:	paulmck@linux.vnet.ibm.com
+M:	Dipankar Sarma <dipankar@in.ibm.com>
+M:	"Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
 W:	http://www.rdrop.com/users/paulmck/rclock/
 S:	Supported
 F:	Documentation/RCU/rcu.txt
@@ -4873,16 +4233,14 @@ F:	include/linux/srcu.h
 F:	kernel/rcupdate.c
 
 REAL TIME CLOCK DRIVER
-P:	Paul Gortmaker
-M:	p_gortmaker@yahoo.com
+M:	Paul Gortmaker <p_gortmaker@yahoo.com>
 S:	Maintained
 F:	Documentation/rtc.txt
 F:	drivers/rtc/
 F:	include/linux/rtc.h
 
 REAL TIME CLOCK (RTC) SUBSYSTEM
-P:	Alessandro Zummo
-M:	a.zummo@towertech.it
+M:	Alessandro Zummo <a.zummo@towertech.it>
 L:	rtc-linux@googlegroups.com
 S:	Maintained
 F:	Documentation/rtc.txt
@@ -4895,8 +4253,7 @@ S:	Supported
 F:	fs/reiserfs/
 
 RFKILL
-P:	Johannes Berg
-M:	johannes@sipsolutions.net
+M:	Johannes Berg <johannes@sipsolutions.net>
 L:	linux-wireless@vger.kernel.org
 S:	Maintained
 F	Documentation/rfkill.txt
@@ -4915,8 +4272,7 @@ F:	Documentation/serial/rocket.txt
 F:	drivers/char/rocket*
 
 ROSE NETWORK LAYER
-P:	Ralf Baechle
-M:	ralf@linux-mips.org
+M:	Ralf Baechle <ralf@linux-mips.org>
 L:	linux-hams@vger.kernel.org
 W:	http://www.linux-ax25.org/
 S:	Maintained
@@ -4925,8 +4281,7 @@ F:	include/net/rose.h
 F:	net/rose/
 
 RTL8180 WIRELESS DRIVER
-P:	John W. Linville
-M:	linville@tuxdriver.com
+M:	"John W. Linville" <linville@tuxdriver.com>
 L:	linux-wireless@vger.kernel.org
 W:	http://linuxwireless.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git
@@ -4934,12 +4289,9 @@ S:	Maintained
 F:	drivers/net/wireless/rtl818*
 
 RTL8187 WIRELESS DRIVER
-P:	Herton Ronaldo Krzesinski
-M:	herton@mandriva.com.br
-P:	Hin-Tak Leung
-M:	htl10@users.sourceforge.net
-P:	Larry Finger
-M:	Larry.Finger@lwfinger.net
+M:	Herton Ronaldo Krzesinski <herton@mandriva.com.br>
+M:	Hin-Tak Leung <htl10@users.sourceforge.net>
+M:	Larry Finger <Larry.Finger@lwfinger.net>
 L:	linux-wireless@vger.kernel.org
 W:	http://linuxwireless.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git
@@ -4947,17 +4299,14 @@ S:	Maintained
 F:	drivers/net/wireless/rtl818x/rtl8187*
 
 S3 SAVAGE FRAMEBUFFER DRIVER
-P:	Antonino Daplas
-M:	adaplas@gmail.com
+M:	Antonino Daplas <adaplas@gmail.com>
 L:	linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
 S:	Maintained
 F:	drivers/video/savage/
 
 S390
-P:	Martin Schwidefsky
-M:	schwidefsky@de.ibm.com
-P:	Heiko Carstens
-M:	heiko.carstens@de.ibm.com
+M:	Martin Schwidefsky <schwidefsky@de.ibm.com>
+M:	Heiko Carstens <heiko.carstens@de.ibm.com>
 M:	linux390@de.ibm.com
 L:	linux-s390@vger.kernel.org
 W:	http://www.ibm.com/developerworks/linux/linux390/
@@ -4965,10 +4314,8 @@ S:	Supported
 F:	arch/s390/
 
 S390 NETWORK DRIVERS
-P:	Ursula Braun
-M:	ursula.braun@de.ibm.com
-P:	Frank Blaschka
-M:	blaschka@linux.vnet.ibm.com
+M:	Ursula Braun <ursula.braun@de.ibm.com>
+M:	Frank Blaschka <blaschka@linux.vnet.ibm.com>
 M:	linux390@de.ibm.com
 L:	linux-s390@vger.kernel.org
 W:	http://www.ibm.com/developerworks/linux/linux390/
@@ -4976,20 +4323,16 @@ S:	Supported
 F:	drivers/s390/net/
 
 S390 ZCRYPT DRIVER
-P:	Felix Beck
-M:	felix.beck@de.ibm.com
-P:	Ralph Wuerthner
-M:	ralph.wuerthner@de.ibm.com
+M:	Felix Beck <felix.beck@de.ibm.com>
+M:	Ralph Wuerthner <ralph.wuerthner@de.ibm.com>
 M:	linux390@de.ibm.com
 L:	linux-s390@vger.kernel.org
 S:	Supported
 F:	drivers/s390/crypto/
 
 S390 ZFCP DRIVER
-P:	Christof Schmitt
-M:	christof.schmitt@de.ibm.com
-P:	Martin Peschke
-M:	mp3@de.ibm.com
+M:	Christof Schmitt <christof.schmitt@de.ibm.com>
+M:	Martin Peschke <mp3@de.ibm.com>
 M:	linux390@de.ibm.com
 L:	linux-s390@vger.kernel.org
 W:	http://www.ibm.com/developerworks/linux/linux390/
@@ -4998,8 +4341,7 @@ F:	Documentation/s390/zfcpdump.txt
 F:	drivers/s390/scsi/zfcp_*
 
 S390 IUCV NETWORK LAYER
-P:	Ursula Braun
-M:	ursula.braun@de.ibm.com
+M:	Ursula Braun <ursula.braun@de.ibm.com>
 M:	linux390@de.ibm.com
 L:	linux-s390@vger.kernel.org
 W:	http://www.ibm.com/developerworks/linux/linux390/
@@ -5009,15 +4351,13 @@ F:	include/net/iucv/
 F:	net/iucv/
 
 S3C24XX SD/MMC Driver
-P:	Ben Dooks
-M:	ben-linux@fluff.org
+M:	Ben Dooks <ben-linux@fluff.org>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Supported
 F:	drivers/mmc/host/s3cmci.*
 
 SAA7146 VIDEO4LINUX-2 DRIVER
-P:	Michael Hunold
-M:	michael@mihu.de
+M:	Michael Hunold <michael@mihu.de>
 L:	linux-media@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
 W:	http://www.mihu.de/linux/saa7146
@@ -5027,31 +4367,26 @@ F:	drivers/media/video/*7146*
 F:	include/media/*7146*
 
 SC1200 WDT DRIVER
-P:	Zwane Mwaikambo
-M:	zwane@arm.linux.org.uk
+M:	Zwane Mwaikambo <zwane@arm.linux.org.uk>
 S:	Maintained
 F:	drivers/watchdog/sc1200wdt.c
 
 SCHEDULER
-P:	Ingo Molnar
-M:	mingo@elte.hu
-P:	Peter Zijlstra
-M:	peterz@infradead.org
+M:	Ingo Molnar <mingo@elte.hu>
+M:	Peter Zijlstra <peterz@infradead.org>
 S:	Maintained
 F:	kernel/sched*
 F:	include/linux/sched.h
 
 SCSI CDROM DRIVER
-P:	Jens Axboe
-M:	axboe@kernel.dk
+M:	Jens Axboe <axboe@kernel.dk>
 L:	linux-scsi@vger.kernel.org
 W:	http://www.kernel.dk
 S:	Maintained
 F:	drivers/scsi/sr*
 
 SCSI SG DRIVER
-P:	Doug Gilbert
-M:	dgilbert@interlog.com
+M:	Doug Gilbert <dgilbert@interlog.com>
 L:	linux-scsi@vger.kernel.org
 W:	http://www.torque.net/sg
 S:	Maintained
@@ -5059,8 +4394,7 @@ F:	drivers/scsi/sg.c
 F:	include/scsi/sg.h
 
 SCSI SUBSYSTEM
-P:	James E.J. Bottomley
-M:	James.Bottomley@HansenPartnership.com
+M:	"James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
 L:	linux-scsi@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6.git
@@ -5070,18 +4404,15 @@ F:	drivers/scsi/
 F:	include/scsi/
 
 SCSI TAPE DRIVER
-P:	Kai Mäkisara
-M:	Kai.Makisara@kolumbus.fi
+M:	Kai Mäkisara <Kai.Makisara@kolumbus.fi>
 L:	linux-scsi@vger.kernel.org
 S:	Maintained
 F:	Documentation/scsi/st.txt
 F:	drivers/scsi/st*
 
 SCTP PROTOCOL
-P:	Vlad Yasevich
-M:	vladislav.yasevich@hp.com
-P:	Sridhar Samudrala
-M:	sri@us.ibm.com
+M:	Vlad Yasevich <vladislav.yasevich@hp.com>
+M:	Sridhar Samudrala <sri@us.ibm.com>
 L:	linux-sctp@vger.kernel.org
 W:	http://lksctp.sourceforge.net
 S:	Supported
@@ -5091,8 +4422,7 @@ F:	include/net/sctp/
 F:	net/sctp/
 
 SCx200 CPU SUPPORT
-P:	Jim Cromie
-M:	jim.cromie@gmail.com
+M:	Jim Cromie <jim.cromie@gmail.com>
 S:	Odd Fixes
 F:	Documentation/i2c/busses/scx200_acb
 F:	arch/x86/kernel/scx200_32.c
@@ -5102,49 +4432,42 @@ F:	drivers/mtd/maps/scx200_docflash.c
 F:	include/linux/scx200.h
 
 SCx200 GPIO DRIVER
-P:	Jim Cromie
-M:	jim.cromie@gmail.com
+M:	Jim Cromie <jim.cromie@gmail.com>
 S:	Maintained
 F:	drivers/char/scx200_gpio.c
 F:	include/linux/scx200_gpio.h
 
 SCx200 HRT CLOCKSOURCE DRIVER
-P:	Jim Cromie
-M:	jim.cromie@gmail.com
+M:	Jim Cromie <jim.cromie@gmail.com>
 S:	Maintained
 F:	drivers/clocksource/scx200_hrt.c
 
 SDRICOH_CS MMC/SD HOST CONTROLLER INTERFACE DRIVER
-P:	Sascha Sommer
-M:	saschasommer@freenet.de
+M:	Sascha Sommer <saschasommer@freenet.de>
 L:	sdricohcs-devel@lists.sourceforge.net (subscribers-only)
 S:	Maintained
 F:	drivers/mmc/host/sdricoh_cs.c
 
 SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) DRIVER
-P:	Pierre Ossman
-M:	pierre@ossman.eu
+M:	Pierre Ossman <pierre@ossman.eu>
 L:	sdhci-devel@lists.ossman.eu
 S:	Maintained
 
 SECURE DIGITAL HOST CONTROLLER INTERFACE, OPEN FIRMWARE BINDINGS (SDHCI-OF)
-P:	Anton Vorontsov
-M:	avorontsov@ru.mvista.com
+M:	Anton Vorontsov <avorontsov@ru.mvista.com>
 L:	linuxppc-dev@ozlabs.org
 L:	sdhci-devel@lists.ossman.eu
 S:	Maintained
 F:	drivers/mmc/host/sdhci.*
 
 SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) SAMSUNG DRIVER
-P:	Ben Dooks
-M:	ben-linux@fluff.org
+M:	Ben Dooks <ben-linux@fluff.org>
 L:	sdhci-devel@lists.ossman.eu
 S:	Maintained
 F:	drivers/mmc/host/sdhci-s3c.c
 
 SECURITY SUBSYSTEM
-P:	James Morris
-M:	jmorris@namei.org
+M:	James Morris <jmorris@namei.org>
 L:	linux-security-module@vger.kernel.org (suggested Cc:)
 T:	git git://www.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6.git
 W:	http://security.wiki.kernel.org/
@@ -5152,17 +4475,13 @@ S:	Supported
 F:	security/
 
 SECURITY CONTACT
-P:	Security Officers
-M:	security@kernel.org
+M:	Security Officers <security@kernel.org>
 S:	Supported
 
 SELINUX SECURITY MODULE
-P:	Stephen Smalley
-M:	sds@tycho.nsa.gov
-P:	James Morris
-M:	jmorris@namei.org
-P:	Eric Paris
-M:	eparis@parisplace.org
+M:	Stephen Smalley <sds@tycho.nsa.gov>
+M:	James Morris <jmorris@namei.org>
+M:	Eric Paris <eparis@parisplace.org>
 L:	selinux@tycho.nsa.gov (subscribers-only, general discussion)
 W:	http://selinuxproject.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6.git
@@ -5171,15 +4490,13 @@ F:	include/linux/selinux*
 F:	security/selinux/
 
 SENSABLE PHANTOM
-P:	Jiri Slaby
-M:	jirislaby@gmail.com
+M:	Jiri Slaby <jirislaby@gmail.com>
 S:	Maintained
 F:	drivers/misc/phantom.c
 F:	include/linux/phantom.h
 
 SERIAL ATA (SATA) SUBSYSTEM
-P:	Jeff Garzik
-M:	jgarzik@pobox.com
+M:	Jeff Garzik <jgarzik@pobox.com>
 L:	linux-ide@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev.git
 S:	Supported
@@ -5188,10 +4505,8 @@ F:	include/linux/ata.h
 F:	include/linux/libata.h
 
 SERVER ENGINES 10Gbps NIC - BladeEngine 2 DRIVER
-P:	Sathya Perla
-M:	sathyap@serverengines.com
-P:	Subbu Seetharaman
-M:	subbus@serverengines.com
+M:	Sathya Perla <sathyap@serverengines.com>
+M:	Subbu Seetharaman <subbus@serverengines.com>
 L:	netdev@vger.kernel.org
 W:	http://www.serverengines.com
 S:	Supported
@@ -5200,20 +4515,17 @@ F:	drivers/net/benet/
 SFC NETWORK DRIVER
 P:	Steve Hodgson
 P:	Ben Hutchings
-P:	Robert Stonehouse
-M:	linux-net-drivers@solarflare.com
+M:	Robert Stonehouse <linux-net-drivers@solarflare.com>
 S:	Supported
 F:	drivers/net/sfc/
 
 SGI GRU DRIVER
-P:	Jack Steiner
-M:	steiner@sgi.com
+M:	Jack Steiner <steiner@sgi.com>
 S:	Maintained
 F:	drivers/misc/sgi-gru/
 
 SGI SN-IA64 (Altix) SERIAL CONSOLE DRIVER
-P:	Pat Gefre
-M:	pfg@sgi.com
+M:	Pat Gefre <pfg@sgi.com>
 L:	linux-ia64@vger.kernel.org
 S:	Supported
 F:	Documentation/ia64/serial.txt
@@ -5221,22 +4533,19 @@ F:	drivers/serial/ioc?_serial.c
 F:	include/linux/ioc?.h
 
 SGI VISUAL WORKSTATION 320 AND 540
-P:	Andrey Panin
-M:	pazke@donpac.ru
+M:	Andrey Panin <pazke@donpac.ru>
 L:	linux-visws-devel@lists.sf.net
 W:	http://linux-visws.sf.net
 S:	Maintained for 2.6.
 F:	Documentation/sgi-visws.txt
 
 SGI XP/XPC/XPNET DRIVER
-P:	Robin Holt
-M:	holt@sgi.com
+M:	Robin Holt <holt@sgi.com>
 S:	Maintained
 F:	drivers/misc/sgi-xp/
 
 SHARP LH SUPPORT (LH7952X & LH7A40X)
-P:	Marc Singer
-M:	elf@buici.com
+M:	Marc Singer <elf@buici.com>
 W:	http://projects.buici.com/arm
 L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
 S:	Maintained
@@ -5247,23 +4556,20 @@ F:	drivers/usb/gadget/lh7a40*
 F:	drivers/usb/host/ohci-lh7a40*
 
 SHPC HOTPLUG DRIVER
-P:	Kristen Carlson Accardi
-M:	kristen.c.accardi@intel.com
+M:	Kristen Carlson Accardi <kristen.c.accardi@intel.com>
 L:	linux-pci@vger.kernel.org
 S:	Supported
 F:	drivers/pci/hotplug/shpchp*
 
 SIMTEC EB110ATX (Chalice CATS)
 P:	Ben Dooks
-P:	Vincent Sanders
-M:	support@simtec.co.uk
+M:	Vincent Sanders <support@simtec.co.uk>
 W:	http://www.simtec.co.uk/products/EB110ATX/
 S:	Supported
 
 SIMTEC EB2410ITX (BAST)
 P:	Ben Dooks
-P:	Vincent Sanders
-M:	support@simtec.co.uk
+M:	Vincent Sanders <support@simtec.co.uk>
 W:	http://www.simtec.co.uk/products/EB2410ITX/
 S:	Supported
 F:	arch/arm/mach-s3c2410/
@@ -5271,31 +4577,27 @@ F:	drivers/*/*s3c2410*
 F:	drivers/*/*/*s3c2410*
 
 SIS 190 ETHERNET DRIVER
-P:	Francois Romieu
-M:	romieu@fr.zoreil.com
+M:	Francois Romieu <romieu@fr.zoreil.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/sis190.c
 
 SIS 900/7016 FAST ETHERNET DRIVER
-P:	Daniele Venzano
-M:	venza@brownhat.org
+M:	Daniele Venzano <venza@brownhat.org>
 W:	http://www.brownhat.org/sis900.html
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/sis900.*
 
 SIS 96X I2C/SMBUS DRIVER
-P:	Mark M. Hoffman
-M:	mhoffman@lightlink.com
+M:	"Mark M. Hoffman" <mhoffman@lightlink.com>
 L:	linux-i2c@vger.kernel.org
 S:	Maintained
 F:	Documentation/i2c/busses/i2c-sis96x
 F:	drivers/i2c/busses/i2c-sis96x.c
 
 SIS FRAMEBUFFER DRIVER
-P:	Thomas Winischhofer
-M:	thomas@winischhofer.net
+M:	Thomas Winischhofer <thomas@winischhofer.net>
 W:	http://www.winischhofer.net/linuxsisvga.shtml
 S:	Maintained
 F:	Documentation/fb/sisfb.txt
@@ -5303,70 +4605,59 @@ F:	drivers/video/sis/
 F:	include/video/sisfb.h
 
 SIS USB2VGA DRIVER
-P:	Thomas Winischhofer
-M:	thomas@winischhofer.net
+M:	Thomas Winischhofer <thomas@winischhofer.net>
 W:	http://www.winischhofer.at/linuxsisusbvga.shtml
 S:	Maintained
 F:	drivers/usb/misc/sisusbvga/
 
 SKGE, SKY2 10/100/1000 GIGABIT ETHERNET DRIVERS
-P:	Stephen Hemminger
-M:	shemminger@linux-foundation.org
+M:	Stephen Hemminger <shemminger@linux-foundation.org>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/skge.*
 F:	drivers/net/sky2.*
 
 SLAB ALLOCATOR
-P:	Christoph Lameter
-M:	cl@linux-foundation.org
-P:	Pekka Enberg
-M:	penberg@cs.helsinki.fi
-P:	Matt Mackall
-M:	mpm@selenic.com
+M:	Christoph Lameter <cl@linux-foundation.org>
+M:	Pekka Enberg <penberg@cs.helsinki.fi>
+M:	Matt Mackall <mpm@selenic.com>
 L:	linux-mm@kvack.org
 S:	Maintained
 F:	include/linux/sl?b*.h
 F:	mm/sl?b.c
 
 SMC91x ETHERNET DRIVER
-P:	Nicolas Pitre
-M:	nico@cam.org
+M:	Nicolas Pitre <nico@cam.org>
 S:	Maintained
 F:	drivers/net/smc91x.*
 
 SMSC47B397 HARDWARE MONITOR DRIVER
-P:	Mark M. Hoffman
-M:	mhoffman@lightlink.com
+M:	"Mark M. Hoffman" <mhoffman@lightlink.com>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	Documentation/hwmon/smsc47b397
 F:	drivers/hwmon/smsc47b397.c
 
 SMSC911x ETHERNET DRIVER
-P:	Steve Glendinning
-M:	steve.glendinning@smsc.com
+M:	Steve Glendinning <steve.glendinning@smsc.com>
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	include/linux/smsc911x.h
 F:	drivers/net/smsc911x.*
 
 SMSC9420 PCI ETHERNET DRIVER
-P:	Steve Glendinning
-M:	steve.glendinning@smsc.com
+M:	Steve Glendinning <steve.glendinning@smsc.com>
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/smsc9420.*
 
 SMX UIO Interface
-P:	Ben Nizette
-M:	bn@niasdigital.com
+M:	Ben Nizette <bn@niasdigital.com>
 S:	Maintained
 F:	drivers/uio/uio_smx.c
 
 SN-IA64 (Itanium) SUB-PLATFORM
-P:	Jes Sorensen
-M:	jes@sgi.com
+M:	Jes Sorensen <jes@sgi.com>
 L:	linux-altix@sgi.com
 L:	linux-ia64@vger.kernel.org
 W:	http://www.sgi.com/altix
@@ -5374,8 +4665,7 @@ S:	Maintained
 F:	arch/ia64/sn/
 
 SOC-CAMERA V4L2 SUBSYSTEM
-P:	Guennadi Liakhovetski
-M:	g.liakhovetski@gmx.de
+M:	Guennadi Liakhovetski <g.liakhovetski@gmx.de>
 L:	linux-media@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
 S:	Maintained
@@ -5383,37 +4673,32 @@ F:	include/media/v4l2*
 F:	drivers/media/video/v4l2*
 
 SOEKRIS NET48XX LED SUPPORT
-P:	Chris Boot
-M:	bootc@bootc.net
+M:	Chris Boot <bootc@bootc.net>
 S:	Maintained
 F:	drivers/leds/leds-net48xx.c
 
 SOFTWARE RAID (Multiple Disks) SUPPORT
-P:	Neil Brown
-M:	neilb@suse.de
+M:	Neil Brown <neilb@suse.de>
 L:	linux-raid@vger.kernel.org
 S:	Supported
 F:	drivers/md/
 F:	include/linux/raid/
 
 SONIC NETWORK DRIVER
-P:	Thomas Bogendoerfer
-M:	tsbogend@alpha.franken.de
+M:	Thomas Bogendoerfer <tsbogend@alpha.franken.de>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/sonic.*
 
 SONICS SILICON BACKPLANE DRIVER (SSB)
-P:	Michael Buesch
-M:	mb@bu3sch.de
+M:	Michael Buesch <mb@bu3sch.de>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/ssb/
 F:	include/linux/ssb/
 
 SONY VAIO CONTROL DEVICE DRIVER
-P:	Mattia Dongili
-M:	malattia@linux.it
+M:	Mattia Dongili <malattia@linux.it>
 L:	linux-acpi@vger.kernel.org
 W:	http://www.linux.it/~malattia/wiki/index.php/Sony_drivers
 S:	Maintained
@@ -5423,17 +4708,14 @@ F:	drivers/platform/x86/sony-laptop.c
 F:	include/linux/sony-laptop.h
 
 SONY MEMORYSTICK CARD SUPPORT
-P:	Alex Dubov
-M:	oakad@yahoo.com
+M:	Alex Dubov <oakad@yahoo.com>
 W:	http://tifmxx.berlios.de/
 S:	Maintained
 F:	drivers/memstick/host/tifm_ms.c
 
 SOUND
-P:	Jaroslav Kysela
-M:	perex@perex.cz
-P:	Takashi Iwai
-M:	tiwai@suse.de
+M:	Jaroslav Kysela <perex@perex.cz>
+M:	Takashi Iwai <tiwai@suse.de>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 W:	http://www.alsa-project.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6.git
@@ -5444,10 +4726,8 @@ F:	include/sound/
 F:	sound/
 
 SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEMENT (ASoC)
-P:	Liam Girdwood
-M:	lrg@slimlogic.co.uk
-P:	Mark Brown
-M:	broonie@opensource.wolfsonmicro.com
+M:	Liam Girdwood <lrg@slimlogic.co.uk>
+M:	Mark Brown <broonie@opensource.wolfsonmicro.com>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6.git
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 W:	http://alsa-project.org/main/index.php/ASoC
@@ -5456,8 +4736,7 @@ F:	sound/soc/
 F:	include/sound/soc*
 
 SPARC + UltraSPARC (sparc/sparc64)
-P:	David S. Miller
-M:	davem@davemloft.net
+M:	"David S. Miller" <davem@davemloft.net>
 L:	sparclinux@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next-2.6.git
@@ -5465,15 +4744,13 @@ S:	Maintained
 F:	arch/sparc/
 
 SPECIALIX IO8+ MULTIPORT SERIAL CARD DRIVER
-P:	Roger Wolff
-M:	R.E.Wolff@BitWizard.nl
+M:	Roger Wolff <R.E.Wolff@BitWizard.nl>
 S:	Supported
 F:	Documentation/serial/specialix.txt
 F:	drivers/char/specialix*
 
 SPI SUBSYSTEM
-P:	David Brownell
-M:	dbrownell@users.sourceforge.net
+M:	David Brownell <dbrownell@users.sourceforge.net>
 L:	spi-devel-general@lists.sourceforge.net
 S:	Maintained
 F:	Documentation/spi/
@@ -5481,18 +4758,15 @@ F:	drivers/spi/
 F:	include/linux/spi/
 
 SPIDERNET NETWORK DRIVER for CELL
-P:	Ishizaki Kou
-M:	kou.ishizaki@toshiba.co.jp
-P:	Jens Osterkamp
-M:	jens@de.ibm.com
+M:	Ishizaki Kou <kou.ishizaki@toshiba.co.jp>
+M:	Jens Osterkamp <jens@de.ibm.com>
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	Documentation/networking/spider_net.txt
 F:	drivers/net/spider_net*
 
 SPU FILE SYSTEM
-P:	Jeremy Kerr
-M:	jk@ozlabs.org
+M:	Jeremy Kerr <jk@ozlabs.org>
 L:	linuxppc-dev@ozlabs.org
 L:	cbe-oss-dev@ozlabs.org
 W:	http://www.ibm.com/developerworks/power/cell/
@@ -5501,8 +4775,7 @@ F:	Documentation/filesystems/spufs.txt
 F:	arch/powerpc/platforms/cell/spufs/
 
 SQUASHFS FILE SYSTEM
-P:	Phillip Lougher
-M:	phillip@lougher.demon.co.uk
+M:	Phillip Lougher <phillip@lougher.demon.co.uk>
 L:	squashfs-devel@lists.sourceforge.net (subscribers-only)
 W:	http://squashfs.org.uk
 S:	Maintained
@@ -5510,49 +4783,41 @@ F:	Documentation/filesystems/squashfs.txt
 F:	fs/squashfs/
 
 SRM (Alpha) environment access
-P:	Jan-Benedict Glaw
-M:	jbglaw@lug-owl.de
+M:	Jan-Benedict Glaw <jbglaw@lug-owl.de>
 S:	Maintained
 F:	arch/alpha/kernel/srm_env.c
 
 STABLE BRANCH
-P:	Greg Kroah-Hartman
-M:	greg@kroah.com
-P:	Chris Wright
-M:	chrisw@sous-sol.org
+M:	Greg Kroah-Hartman <greg@kroah.com>
+M:	Chris Wright <chrisw@sous-sol.org>
 L:	stable@kernel.org
 S:	Maintained
 
 STAGING SUBSYSTEM
-P:	Greg Kroah-Hartman
-M:	gregkh@suse.de
+M:	Greg Kroah-Hartman <gregkh@suse.de>
 T:	quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
 L:	devel@driverdev.osuosl.org
 S:	Maintained
 F:	drivers/staging/
 
 STARFIRE/DURALAN NETWORK DRIVER
-P:	Ion Badulescu
-M:	ionut@cs.columbia.edu
-S:	Maintained
+M:	Ion Badulescu <ionut@badula.org>
+S:	Odd Fixes
 F:	drivers/net/starfire*
 
 STARMODE RADIO IP (STRIP) PROTOCOL DRIVER
-W:	http://mosquitonet.Stanford.EDU/strip.html
 S:	Orphan
 F:	drivers/net/wireless/strip.c
 F:	include/linux/if_strip.h
 
 STRADIS MPEG-2 DECODER DRIVER
-P:	Nathan Laredo
-M:	laredo@gnu.org
+M:	Nathan Laredo <laredo@gnu.org>
 W:	http://www.stradis.com/
 S:	Maintained
 F:	drivers/media/video/stradis.c
 
 SUN3/3X
-P:	Sam Creasey
-M:	sammy@sammy.net
+M:	Sam Creasey <sammy@sammy.net>
 W:	http://sammy.net/sun3/
 S:	Maintained
 F:	arch/m68k/kernel/*sun3*
@@ -5560,8 +4825,7 @@ F:	arch/m68k/sun3*/
 F:	arch/m68k/include/asm/sun3*
 
 SUPERH
-P:	Paul Mundt
-M:	lethal@linux-sh.org
+M:	Paul Mundt <lethal@linux-sh.org>
 L:	linux-sh@vger.kernel.org
 W:	http://www.linux-sh.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6.git
@@ -5571,12 +4835,9 @@ F:	arch/sh/
 F:	drivers/sh/
 
 SUSPEND TO RAM
-P:	Len Brown
-M:	len.brown@intel.com
-P:	Pavel Machek
-M:	pavel@ucw.cz
-P:	Rafael J. Wysocki
-M:	rjw@sisk.pl
+M:	Len Brown <len.brown@intel.com>
+M:	Pavel Machek <pavel@ucw.cz>
+M:	"Rafael J. Wysocki" <rjw@sisk.pl>
 L:	linux-pm@lists.linux-foundation.org
 S:	Supported
 F:	Documentation/power/
@@ -5588,32 +4849,28 @@ F:	include/linux/freezer.h
 F:	include/linux/pm.h
 
 SVGA HANDLING
-P:	Martin Mares
-M:	mj@ucw.cz
+M:	Martin Mares <mj@ucw.cz>
 L:	linux-video@atrey.karlin.mff.cuni.cz
 S:	Maintained
 F:	Documentation/svga.txt
 F:	arch/x86/boot/video*
 
 SYSV FILESYSTEM
-P:	Christoph Hellwig
-M:	hch@infradead.org
+M:	Christoph Hellwig <hch@infradead.org>
 S:	Maintained
 F:	Documentation/filesystems/sysv-fs.txt
 F:	fs/sysv/
 F:	include/linux/sysv_fs.h
 
 TASKSTATS STATISTICS INTERFACE
-P:	Balbir Singh
-M:	balbir@linux.vnet.ibm.com
+M:	Balbir Singh <balbir@linux.vnet.ibm.com>
 S:	Maintained
 F:	Documentation/accounting/taskstats*
 F:	include/linux/taskstats*
 F:	kernel/taskstats.c
 
 TC CLASSIFIER
-P:	Jamal Hadi Salim
-M:	hadi@cyberus.ca
+M:	Jamal Hadi Salim <hadi@cyberus.ca>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	include/linux/pkt_cls.h
@@ -5621,38 +4878,31 @@ F:	include/net/pkt_cls.h
 F:	net/sched/
 
 TCP LOW PRIORITY MODULE
-P:	Wong Hoi Sing, Edison
-M:	hswong3i@gmail.com
-P:	Hung Hing Lun, Mike
-M:	hlhung3i@gmail.com
+M:	"Wong Hoi Sing, Edison" <hswong3i@gmail.com>
+M:	"Hung Hing Lun, Mike" <hlhung3i@gmail.com>
 W:	http://tcp-lp-mod.sourceforge.net/
 S:	Maintained
 F:	net/ipv4/tcp_lp.c
 
 TEHUTI ETHERNET DRIVER
-P:	Alexander Indenbaum
-M:	baum@tehutinetworks.net
-P:	Andy Gospodarek
-M:	andy@greyhouse.net
+M:	Alexander Indenbaum <baum@tehutinetworks.net>
+M:	Andy Gospodarek <andy@greyhouse.net>
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/tehuti*
 
 Telecom Clock Driver for MCPL0010
-P:	Mark Gross
-M:	mark.gross@intel.com
+M:	Mark Gross <mark.gross@intel.com>
 S:	Supported
 F:	drivers/char/tlclk.c
 
 TENSILICA XTENSA PORT (xtensa)
-P:	Chris Zankel
-M:	chris@zankel.net
+M:	Chris Zankel <chris@zankel.net>
 S:	Maintained
 F:	arch/xtensa/
 
 THINKPAD ACPI EXTRAS DRIVER
-P:	Henrique de Moraes Holschuh
-M:	ibm-acpi@hmh.eng.br
+M:	Henrique de Moraes Holschuh <ibm-acpi@hmh.eng.br>
 L:	ibm-acpi-devel@lists.sourceforge.net
 W:	http://ibm-acpi.sourceforge.net
 W:	http://thinkwiki.org/wiki/Ibm-acpi
@@ -5661,20 +4911,22 @@ S:	Maintained
 F:	drivers/platform/x86/thinkpad_acpi.c
 
 TI FLASH MEDIA INTERFACE DRIVER
-P:	Alex Dubov
-M:	oakad@yahoo.com
+M:	Alex Dubov <oakad@yahoo.com>
 S:	Maintained
 F:	drivers/misc/tifm*
 F:	drivers/mmc/host/tifm_sd.c
 F:	include/linux/tifm.h
 
+TI TWL4030 SERIES SOC CODEC DRIVER
+M:	Peter Ujfalusi <peter.ujfalusi@nokia.com>
+L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
+S:	Maintained
+F:	sound/soc/codecs/twl4030*
+
 TIPC NETWORK LAYER
-P:	Per Liden
-M:	per.liden@ericsson.com
-P:	Jon Maloy
-M:	jon.maloy@ericsson.com
-P:	Allan Stephens
-M:	allan.stephens@windriver.com
+M:	Per Liden <per.liden@ericsson.com>
+M:	Jon Maloy <jon.maloy@ericsson.com>
+M:	Allan Stephens <allan.stephens@windriver.com>
 L:	tipc-discussion@lists.sourceforge.net
 W:	http://tipc.sourceforge.net/
 W:	http://tipc.cslab.ericsson.net/
@@ -5685,8 +4937,7 @@ F:	include/net/tipc/
 F:	net/tipc/
 
 TLAN NETWORK DRIVER
-P:	Samuel Chessman
-M:	chessman@tux.org
+M:	Samuel Chessman <chessman@tux.org>
 L:	tlan-devel@lists.sourceforge.net (subscribers-only)
 W:	http://sourceforge.net/projects/tlan/
 S:	Maintained
@@ -5694,10 +4945,8 @@ F:	Documentation/networking/tlan.txt
 F:	drivers/net/tlan.*
 
 TOMOYO SECURITY MODULE
-P:	Kentaro Takeda
-M:	takedakn@nttdata.co.jp
-P:	Tetsuo Handa
-M:	penguin-kernel@I-love.SAKURA.ne.jp
+M:	Kentaro Takeda <takedakn@nttdata.co.jp>
+M:	Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
 L:	tomoyo-users-en@lists.sourceforge.jp (subscribers-only, for developers and users in English)
 L:	tomoyo-dev@lists.sourceforge.jp (subscribers-only, for developers in Japanese)
 L:	tomoyo-users@lists.sourceforge.jp (subscribers-only, for users in Japanese)
@@ -5711,8 +4960,7 @@ S:	Orphan
 F:	drivers/platform/x86/toshiba_acpi.c
 
 TOSHIBA SMM DRIVER
-P:	Jonathan Buzzard
-M:	jonathan@buzzard.org.uk
+M:	Jonathan Buzzard <jonathan@buzzard.org.uk>
 L:	tlinux-users@tce.toshiba-dme.co.jp
 W:	http://www.buzzard.org.uk/toshiba/
 S:	Maintained
@@ -5720,61 +4968,51 @@ F:	drivers/char/toshiba.c
 F:	include/linux/toshiba.h
 
 TMIO MMC DRIVER
-P:	Ian Molton
-M:	ian@mnementh.co.uk
+M:	Ian Molton <ian@mnementh.co.uk>
 S:	Maintained
 F:	drivers/mmc/host/tmio_mmc.*
 
 TMPFS (SHMEM FILESYSTEM)
-P:	Hugh Dickins
-M:	hugh.dickins@tiscali.co.uk
+M:	Hugh Dickins <hugh.dickins@tiscali.co.uk>
 L:	linux-mm@kvack.org
 S:	Maintained
 F:	include/linux/shmem_fs.h
 F:	mm/shmem.c
 
 TPM DEVICE DRIVER
-P:	Debora Velarde
-M:	debora@linux.vnet.ibm.com
-P:	Rajiv Andrade
-M:	srajiv@linux.vnet.ibm.com
+M:	Debora Velarde <debora@linux.vnet.ibm.com>
+M:	Rajiv Andrade <srajiv@linux.vnet.ibm.com>
 W:	http://tpmdd.sourceforge.net
-P:	Marcel Selhorst
-M:	m.selhorst@sirrix.com
+M:	Marcel Selhorst <m.selhorst@sirrix.com>
 W:	http://www.sirrix.com
 L:	tpmdd-devel@lists.sourceforge.net (moderated for non-subscribers)
 S:	Maintained
 F:	drivers/char/tpm/
 
 TRIVIAL PATCHES
-P:	Jiri Kosina
-M:	trivial@kernel.org
+M:	Jiri Kosina <trivial@kernel.org>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial.git
 S:	Maintained
+
+TTY LAYER
+M:	Greg Kroah-Hartman <gregkh@suse.de>
+S:	Maintained
+T:	quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
 F:	drivers/char/tty_*
 F:	drivers/serial/serial_core.c
 F:	include/linux/serial_core.h
 F:	include/linux/serial.h
 F:	include/linux/tty.h
 
-TTY LAYER
-P:	Alan Cox
-M:	alan@lxorguk.ukuu.org.uk
-S:	Maintained
-T:	stgit http://zeniv.linux.org.uk/~alan/ttydev/
-
 TULIP NETWORK DRIVERS
-P:	Grant Grundler
-M:	grundler@parisc-linux.org
-P:	Kyle McMartin
-M:	kyle@mcmartin.ca
+M:	Grant Grundler <grundler@parisc-linux.org>
+M:	Kyle McMartin <kyle@mcmartin.ca>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/tulip/
 
 TUN/TAP driver
-P:	Maxim Krasnyansky
-M:	maxk@qualcomm.com
+M:	Maxim Krasnyansky <maxk@qualcomm.com>
 L:	vtun@office.satix.net
 W:	http://vtun.sourceforge.net/tun
 S:	Maintained
@@ -5782,24 +5020,20 @@ F:	Documentation/networking/tuntap.txt
 F:	arch/um/os-Linux/drivers/
 
 TURBOCHANNEL SUBSYSTEM
-P:	Maciej W. Rozycki
-M:	macro@linux-mips.org
+M:	"Maciej W. Rozycki" <macro@linux-mips.org>
 S:	Maintained
 F:	drivers/tc/
 F:	include/linux/tc.h
 
 U14-34F SCSI DRIVER
-P:	Dario Ballabio
-M:	ballabio_dario@emc.com
+M:	Dario Ballabio <ballabio_dario@emc.com>
 L:	linux-scsi@vger.kernel.org
 S:	Maintained
 F:	drivers/scsi/u14-34f.c
 
 UBI FILE SYSTEM (UBIFS)
-P:	Artem Bityutskiy
-M:	dedekind@infradead.org
-P:	Adrian Hunter
-M:	ext-adrian.hunter@nokia.com
+M:	Artem Bityutskiy <dedekind@infradead.org>
+M:	Adrian Hunter <adrian.hunter@nokia.com>
 L:	linux-mtd@lists.infradead.org
 T:	git git://git.infradead.org/ubifs-2.6.git
 W:	http://www.linux-mtd.infradead.org/doc/ubifs.html
@@ -5808,37 +5042,32 @@ F:	Documentation/filesystems/ubifs.txt
 F:	fs/ubifs/
 
 UCLINUX (AND M68KNOMMU)
-P:	Greg Ungerer
-M:	gerg@uclinux.org
+M:	Greg Ungerer <gerg@uclinux.org>
 W:	http://www.uclinux.org/
 L:	uclinux-dev@uclinux.org  (subscribers-only)
 S:	Maintained
 F:	arch/m68knommu/
 
 UCLINUX FOR RENESAS H8/300 (H8300)
-P:	Yoshinori Sato
-M:	ysato@users.sourceforge.jp
+M:	Yoshinori Sato <ysato@users.sourceforge.jp>
 W:	http://uclinux-h8.sourceforge.jp/
 S:	Supported
 
 UDF FILESYSTEM
-P:	Jan Kara
-M:	jack@suse.cz
+M:	Jan Kara <jack@suse.cz>
 W:	http://linux-udf.sourceforge.net
 S:	Maintained
 F:	Documentation/filesystems/udf.txt
 F:	fs/udf/
 
 UFS FILESYSTEM
-P:	Evgeniy Dushistov
-M:	dushistov@mail.ru
+M:	Evgeniy Dushistov <dushistov@mail.ru>
 S:	Maintained
 F:	Documentation/filesystems/ufs.txt
 F:	fs/ufs/
 
 ULTRA-WIDEBAND (UWB) SUBSYSTEM:
-P:	David Vrabel
-M:	david.vrabel@csr.com
+M:	David Vrabel <david.vrabel@csr.com>
 L:	linux-usb@vger.kernel.org
 S:	Supported
 F:	drivers/uwb/*
@@ -5846,8 +5075,7 @@ F:	include/linux/uwb.h
 F:	include/linux/uwb/
 
 UNIFORM CDROM DRIVER
-P:	Jens Axboe
-M:	axboe@kernel.dk
+M:	Jens Axboe <axboe@kernel.dk>
 W:	http://www.kernel.dk
 S:	Maintained
 F:	Documentation/cdrom/
@@ -5855,8 +5083,7 @@ F:	drivers/cdrom/cdrom.c
 F:	include/linux/cdrom.h
 
 UNSORTED BLOCK IMAGES (UBI)
-P:	Artem Bityutskiy
-M:	dedekind@infradead.org
+M:	Artem Bityutskiy <dedekind@infradead.org>
 W:	http://www.linux-mtd.infradead.org/
 L:	linux-mtd@lists.infradead.org
 T:	git git://git.infradead.org/ubi-2.6.git
@@ -5866,23 +5093,20 @@ F:	include/linux/mtd/ubi.h
 F:	include/mtd/ubi-user.h
 
 USB ACM DRIVER
-P:	Oliver Neukum
-M:	oliver@neukum.name
+M:	Oliver Neukum <oliver@neukum.name>
 L:	linux-usb@vger.kernel.org
 S:	Maintained
 F:	Documentation/usb/acm.txt
 F:	drivers/usb/class/cdc-acm.*
 
 USB BLOCK DRIVER (UB ub)
-P:	Pete Zaitcev
-M:	zaitcev@redhat.com
+M:	Pete Zaitcev <zaitcev@redhat.com>
 L:	linux-usb@vger.kernel.org
 S:	Supported
 F:	drivers/block/ub.c
 
 USB CDC ETHERNET DRIVER
-P:	Greg Kroah-Hartman
-M:	greg@kroah.com
+M:	Greg Kroah-Hartman <greg@kroah.com>
 L:	linux-usb@vger.kernel.org
 S:	Maintained
 W:	http://www.kroah.com/linux-usb/
@@ -5890,39 +5114,34 @@ F:	drivers/net/usb/cdc_*.c
 F:	include/linux/usb/cdc.h
 
 USB CYPRESS C67X00 DRIVER
-P:	Peter Korsgaard
-M:	jacmet@sunsite.dk
+M:	Peter Korsgaard <jacmet@sunsite.dk>
 L:	linux-usb@vger.kernel.org
 S:	Maintained
 F:	drivers/usb/c67x00/
 
 USB DAVICOM DM9601 DRIVER
-P:	Peter Korsgaard
-M:	jacmet@sunsite.dk
+M:	Peter Korsgaard <jacmet@sunsite.dk>
 L:	netdev@vger.kernel.org
 W:	http://www.linux-usb.org/usbnet
 S:	Maintained
 F:	drivers/net/usb/dm9601.c
 
 USB DIAMOND RIO500 DRIVER
-P:	Cesar Miquel
-M:	miquel@df.uba.ar
+M:	Cesar Miquel <miquel@df.uba.ar>
 L:	rio500-users@lists.sourceforge.net
 W:	http://rio500.sourceforge.net
 S:	Maintained
 F:	drivers/usb/misc/rio500*
 
 USB EHCI DRIVER
-P:	David Brownell
-M:	dbrownell@users.sourceforge.net
+M:	David Brownell <dbrownell@users.sourceforge.net>
 L:	linux-usb@vger.kernel.org
 S:	Odd Fixes
 F:	Documentation/usb/ehci.txt
 F:	drivers/usb/host/ehci*
 
 USB ET61X[12]51 DRIVER
-P:	Luca Risolia
-M:	luca.risolia@studio.unibo.it
+M:	Luca Risolia <luca.risolia@studio.unibo.it>
 L:	linux-usb@vger.kernel.org
 L:	linux-media@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
@@ -5931,8 +5150,7 @@ S:	Maintained
 F:	drivers/media/video/et61x251/
 
 USB GADGET/PERIPHERAL SUBSYSTEM
-P:	David Brownell
-M:	dbrownell@users.sourceforge.net
+M:	David Brownell <dbrownell@users.sourceforge.net>
 L:	linux-usb@vger.kernel.org
 W:	http://www.linux-usb.org/gadget
 S:	Maintained
@@ -5940,8 +5158,7 @@ F:	drivers/usb/gadget/
 F:	include/linux/usb/gadget*
 
 USB HID/HIDBP DRIVERS (USB KEYBOARDS, MICE, REMOTE CONTROLS, ...)
-P:	Jiri Kosina
-M:	jkosina@suse.cz
+M:	Jiri Kosina <jkosina@suse.cz>
 L:	linux-usb@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid.git
 S:	Maintained
@@ -5949,23 +5166,20 @@ F:	Documentation/usb/hiddev.txt
 F:	drivers/hid/usbhid/
 
 USB ISP116X DRIVER
-P:	Olav Kongas
-M:	ok@artecdesign.ee
+M:	Olav Kongas <ok@artecdesign.ee>
 L:	linux-usb@vger.kernel.org
 S:	Maintained
 F:	drivers/usb/host/isp116x*
 F:	include/linux/usb/isp116x.h
 
 USB KAWASAKI LSI DRIVER
-P:	Oliver Neukum
-M:	oliver@neukum.name
+M:	Oliver Neukum <oliver@neukum.name>
 L:	linux-usb@vger.kernel.org
 S:	Maintained
 F:	drivers/usb/serial/kl5kusb105.*
 
 USB MASS STORAGE DRIVER
-P:	Matthew Dharm
-M:	mdharm-usb@one-eyed-alien.net
+M:	Matthew Dharm <mdharm-usb@one-eyed-alien.net>
 L:	linux-usb@vger.kernel.org
 L:	usb-storage@lists.one-eyed-alien.net
 S:	Maintained
@@ -5973,31 +5187,27 @@ W:	http://www.one-eyed-alien.net/~mdharm/linux-usb/
 F:	drivers/usb/storage/
 
 USB OHCI DRIVER
-P:	David Brownell
-M:	dbrownell@users.sourceforge.net
+M:	David Brownell <dbrownell@users.sourceforge.net>
 L:	linux-usb@vger.kernel.org
 S:	Odd Fixes
 F:	Documentation/usb/ohci.txt
 F:	drivers/usb/host/ohci*
 
 USB OPTION-CARD DRIVER
-P:	Matthias Urlichs
-M:	smurf@smurf.noris.de
+M:	Matthias Urlichs <smurf@smurf.noris.de>
 L:	linux-usb@vger.kernel.org
 S:	Maintained
 F:	drivers/usb/serial/option.c
 
 USB OV511 DRIVER
-P:	Mark McClelland
-M:	mmcclell@bigfoot.com
+M:	Mark McClelland <mmcclell@bigfoot.com>
 L:	linux-usb@vger.kernel.org
 W:	http://alpha.dyndns.org/ov511/
 S:	Maintained
 F:	drivers/media/video/ov511.*
 
 USB PEGASUS DRIVER
-P:	Petko Manolov
-M:	petkan@users.sourceforge.net
+M:	Petko Manolov <petkan@users.sourceforge.net>
 L:	linux-usb@vger.kernel.org
 L:	netdev@vger.kernel.org
 W:	http://pegasus2.sourceforge.net/
@@ -6005,15 +5215,13 @@ S:	Maintained
 F:	drivers/net/usb/pegasus.*
 
 USB PRINTER DRIVER (usblp)
-P:	Pete Zaitcev
-M:	zaitcev@redhat.com
+M:	Pete Zaitcev <zaitcev@redhat.com>
 L:	linux-usb@vger.kernel.org
 S:	Supported
 F:	drivers/usb/class/usblp.c
 
 USB RTL8150 DRIVER
-P:	Petko Manolov
-M:	petkan@users.sourceforge.net
+M:	Petko Manolov <petkan@users.sourceforge.net>
 L:	linux-usb@vger.kernel.org
 L:	netdev@vger.kernel.org
 W:	http://pegasus2.sourceforge.net/
@@ -6021,8 +5229,7 @@ S:	Maintained
 F:	drivers/net/usb/rtl8150.c
 
 USB SE401 DRIVER
-P:	Jeroen Vreeken
-M:	pe1rxq@amsat.org
+M:	Jeroen Vreeken <pe1rxq@amsat.org>
 L:	linux-usb@vger.kernel.org
 W:	http://www.chello.nl/~j.vreeken/se401/
 S:	Maintained
@@ -6030,15 +5237,13 @@ F:	Documentation/video4linux/se401.txt
 F:	drivers/media/video/se401.*
 
 USB SERIAL BELKIN F5U103 DRIVER
-P:	William Greathouse
-M:	wgreathouse@smva.com
+M:	William Greathouse <wgreathouse@smva.com>
 L:	linux-usb@vger.kernel.org
 S:	Maintained
 F:	drivers/usb/serial/belkin_sa.*
 
 USB SERIAL CYPRESS M8 DRIVER
-P:	Lonnie Mendez
-M:	dignome@gmail.com
+M:	Lonnie Mendez <dignome@gmail.com>
 L:	linux-usb@vger.kernel.org
 S:	Maintained
 W:	http://geocities.com/i0xox0i
@@ -6046,23 +5251,20 @@ W:	http://firstlight.net/cvs
 F:	drivers/usb/serial/cypress_m8.*
 
 USB SERIAL CYBERJACK DRIVER
-P:	Matthias Bruestle and Harald Welte
-M:	support@reiner-sct.com
+M:	Matthias Bruestle and Harald Welte <support@reiner-sct.com>
 W:	http://www.reiner-sct.de/support/treiber_cyberjack.php
 S:	Maintained
 F:	drivers/usb/serial/cyberjack.c
 
 USB SERIAL DIGI ACCELEPORT DRIVER
-P:	Peter Berger and Al Borchers
-M:	pberger@brimson.com
-M:	alborchers@steinerpoint.com
+M:	Peter Berger <pberger@brimson.com>
+M:	Al Borchers <alborchers@steinerpoint.com>
 L:	linux-usb@vger.kernel.org
 S:	Maintained
 F:	drivers/usb/serial/digi_acceleport.c
 
 USB SERIAL DRIVER
-P:	Greg Kroah-Hartman
-M:	gregkh@suse.de
+M:	Greg Kroah-Hartman <gregkh@suse.de>
 L:	linux-usb@vger.kernel.org
 S:	Supported
 F:	Documentation/usb/usb-serial.txt
@@ -6071,38 +5273,33 @@ F:	drivers/usb/serial/usb-serial.c
 F:	include/linux/usb/serial.h
 
 USB SERIAL EMPEG EMPEG-CAR MARK I/II DRIVER
-P:	Gary Brubaker
-M:	xavyer@ix.netcom.com
+M:	Gary Brubaker <xavyer@ix.netcom.com>
 L:	linux-usb@vger.kernel.org
 S:	Maintained
 F:	drivers/usb/serial/empeg.c
 
 USB SERIAL KEYSPAN DRIVER
-P:	Greg Kroah-Hartman
-M:	greg@kroah.com
+M:	Greg Kroah-Hartman <greg@kroah.com>
 L:	linux-usb@vger.kernel.org
 W:	http://www.kroah.com/linux/
 S:	Maintained
 F:	drivers/usb/serial/*keyspan*
 
 USB SERIAL WHITEHEAT DRIVER
-P:	Support Department
-M:	support@connecttech.com
+M:	Support Department <support@connecttech.com>
 L:	linux-usb@vger.kernel.org
 W:	http://www.connecttech.com
 S:	Supported
 F:	drivers/usb/serial/whiteheat*
 
 USB SMSC95XX ETHERNET DRIVER
-P:	Steve Glendinning
-M:	steve.glendinning@smsc.com
+M:	Steve Glendinning <steve.glendinning@smsc.com>
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/usb/smsc95xx.*
 
 USB SN9C1xx DRIVER
-P:	Luca Risolia
-M:	luca.risolia@studio.unibo.it
+M:	Luca Risolia <luca.risolia@studio.unibo.it>
 L:	linux-usb@vger.kernel.org
 L:	linux-media@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
@@ -6112,8 +5309,7 @@ F:	Documentation/video4linux/sn9c102.txt
 F:	drivers/media/video/sn9c102/
 
 USB SUBSYSTEM
-P:	Greg Kroah-Hartman
-M:	gregkh@suse.de
+M:	Greg Kroah-Hartman <gregkh@suse.de>
 L:	linux-usb@vger.kernel.org
 W:	http://www.linux-usb.org
 T:	quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
@@ -6125,15 +5321,13 @@ F:	include/linux/usb.h
 F:	include/linux/usb/
 
 USB UHCI DRIVER
-P:	Alan Stern
-M:	stern@rowland.harvard.edu
+M:	Alan Stern <stern@rowland.harvard.edu>
 L:	linux-usb@vger.kernel.org
 S:	Maintained
 F:	drivers/usb/host/uhci*
 
 USB "USBNET" DRIVER FRAMEWORK
-P:	David Brownell
-M:	dbrownell@users.sourceforge.net
+M:	David Brownell <dbrownell@users.sourceforge.net>
 L:	netdev@vger.kernel.org
 W:	http://www.linux-usb.org/usbnet
 S:	Maintained
@@ -6141,8 +5335,7 @@ F:	drivers/net/usb/usbnet.c
 F:	include/linux/usb/usbnet.h
 
 USB VIDEO CLASS
-P:	Laurent Pinchart
-M:	laurent.pinchart@skynet.be
+M:	Laurent Pinchart <laurent.pinchart@skynet.be>
 L:	linux-uvc-devel@lists.berlios.de (subscribers-only)
 L:	linux-media@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
@@ -6151,8 +5344,7 @@ S:	Maintained
 F:	drivers/media/video/uvc/
 
 USB W996[87]CF DRIVER
-P:	Luca Risolia
-M:	luca.risolia@studio.unibo.it
+M:	Luca Risolia <luca.risolia@studio.unibo.it>
 L:	linux-usb@vger.kernel.org
 L:	linux-media@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
@@ -6162,21 +5354,18 @@ F:	Documentation/video4linux/w9968cf.txt
 F:	drivers/media/video/w996*
 
 USB WIRELESS RNDIS DRIVER (rndis_wlan)
-P:	Jussi Kivilinna
-M:	jussi.kivilinna@mbnet.fi
+M:	Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
 L:	linux-wireless@vger.kernel.org
 S:	Maintained
 F:	drivers/net/wireless/rndis_wlan.c
 
 USB XHCI DRIVER
-P:	Sarah Sharp
-M:	sarah.a.sharp@intel.com
+M:	Sarah Sharp <sarah.a.sharp@intel.com>
 L:	linux-usb@vger.kernel.org
 S:	Supported
 
 USB ZC0301 DRIVER
-P:	Luca Risolia
-M:	luca.risolia@studio.unibo.it
+M:	Luca Risolia <luca.risolia@studio.unibo.it>
 L:	linux-usb@vger.kernel.org
 L:	linux-media@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
@@ -6186,16 +5375,14 @@ F:	Documentation/video4linux/zc0301.txt
 F:	drivers/media/video/zc0301/
 
 USB ZD1201 DRIVER
-P:	Jeroen Vreeken
-M:	pe1rxq@amsat.org
+M:	Jeroen Vreeken <pe1rxq@amsat.org>
 L:	linux-usb@vger.kernel.org
 W:	http://linux-lc100020.sourceforge.net
 S:	Maintained
 F:	drivers/net/wireless/zd1201.*
 
 USB ZR364XX DRIVER
-P:	Antoine Jacquet
-M:	royale@zerezo.com
+M:	Antoine Jacquet <royale@zerezo.com>
 L:	linux-usb@vger.kernel.org
 L:	linux-media@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
@@ -6205,8 +5392,7 @@ F:	Documentation/video4linux/zr364xx.txt
 F:	drivers/media/video/zr364xx.c
 
 USER-MODE LINUX (UML)
-P:	Jeff Dike
-M:	jdike@addtoit.com
+M:	Jeff Dike <jdike@addtoit.com>
 L:	user-mode-linux-devel@lists.sourceforge.net
 L:	user-mode-linux-user@lists.sourceforge.net
 W:	http://user-mode-linux.sourceforge.net
@@ -6217,26 +5403,22 @@ F:	fs/hostfs/
 F:	fs/hppfs/
 
 USERSPACE I/O (UIO)
-P:	Hans J. Koch
-M:	hjk@linutronix.de
-P:	Greg Kroah-Hartman
-M:	gregkh@suse.de
+M:	"Hans J. Koch" <hjk@linutronix.de>
+M:	Greg Kroah-Hartman <gregkh@suse.de>
 S:	Maintained
 F:	Documentation/DocBook/uio-howto.tmpl
 F:	drivers/uio/
 F:	include/linux/uio*.h
 
 UTIL-LINUX-NG PACKAGE
-P:	Karel Zak
-M:	kzak@redhat.com
+M:	Karel Zak <kzak@redhat.com>
 L:	util-linux-ng@vger.kernel.org
 W:	http://kernel.org/~kzak/util-linux-ng/
 T:	git git://git.kernel.org/pub/scm/utils/util-linux-ng/util-linux-ng.git
 S:	Maintained
 
 UVESAFB DRIVER
-P:	Michal Januszewski
-M:	spock@gentoo.org
+M:	Michal Januszewski <spock@gentoo.org>
 L:	linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:	http://dev.gentoo.org/~spock/projects/uvesafb/
 S:	Maintained
@@ -6244,53 +5426,44 @@ F:	Documentation/fb/uvesafb.txt
 F:	drivers/video/uvesafb.*
 
 VFAT/FAT/MSDOS FILESYSTEM
-P:	OGAWA Hirofumi
-M:	hirofumi@mail.parknet.co.jp
+M:	OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
 S:	Maintained
 F:	Documentation/filesystems/vfat.txt
 F:	fs/fat/
 
 VIA RHINE NETWORK DRIVER
-P:	Roger Luethi
-M:	rl@hellgate.ch
+M:	Roger Luethi <rl@hellgate.ch>
 S:	Maintained
 F:	drivers/net/via-rhine.c
 
 VIAPRO SMBUS DRIVER
-P:	Jean Delvare
-M:	khali@linux-fr.org
+M:	Jean Delvare <khali@linux-fr.org>
 L:	linux-i2c@vger.kernel.org
 S:	Maintained
 F:	Documentation/i2c/busses/i2c-viapro
 F:	drivers/i2c/busses/i2c-viapro.c
 
 VIA SD/MMC CARD CONTROLLER DRIVER
-P:	Joseph Chan
-M:	JosephChan@via.com.tw
-P:	Harald Welte
-M:	HaraldWelte@viatech.com
+M:	Joseph Chan <JosephChan@via.com.tw>
+M:	Harald Welte <HaraldWelte@viatech.com>
 S:	Maintained
 F:	drivers/mmc/host/via-sdmmc.c
 
 VIA UNICHROME(PRO)/CHROME9 FRAMEBUFFER DRIVER
-P:	Joseph Chan
-M:	JosephChan@via.com.tw
-P:	Scott Fang
-M:	ScottFang@viatech.com.cn
+M:	Joseph Chan <JosephChan@via.com.tw>
+M:	Scott Fang <ScottFang@viatech.com.cn>
 L:	linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
 S:	Maintained
 F:	drivers/video/via/
 
 VIA VELOCITY NETWORK DRIVER
-P:	Francois Romieu
-M:	romieu@fr.zoreil.com
+M:	Francois Romieu <romieu@fr.zoreil.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/via-velocity.*
 
 VLAN (802.1Q)
-P:	Patrick McHardy
-M:	kaber@trash.net
+M:	Patrick McHardy <kaber@trash.net>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/macvlan.c
@@ -6298,18 +5471,15 @@ F:	include/linux/if_*vlan.h
 F:	net/8021q/
 
 VLYNQ BUS
-P:	Florian Fainelli
-M:	florian@openwrt.org
+M:	Florian Fainelli <florian@openwrt.org>
 L:	openwrt-devel@lists.openwrt.org
 S:	Maintained
 F:	drivers/vlynq/vlynq.c
 F:	include/linux/vlynq.h
 
 VOLTAGE AND CURRENT REGULATOR FRAMEWORK
-P:	Liam Girdwood
-M:	lrg@slimlogic.co.uk
-P:	Mark Brown
-M:	broonie@opensource.wolfsonmicro.com
+M:	Liam Girdwood <lrg@slimlogic.co.uk>
+M:	Mark Brown <broonie@opensource.wolfsonmicro.com>
 W:	http://opensource.wolfsonmicro.com/node/15
 W:	http://www.slimlogic.co.uk/?p=48
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6.git
@@ -6318,52 +5488,45 @@ F:	drivers/regulator/
 F:	include/linux/regulator/
 
 VT1211 HARDWARE MONITOR DRIVER
-P:	Juerg Haefliger
-M:	juergh@gmail.com
+M:	Juerg Haefliger <juergh@gmail.com>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	Documentation/hwmon/vt1211
 F:	drivers/hwmon/vt1211.c
 
 VT8231 HARDWARE MONITOR DRIVER
-P:	Roger Lucas
-M:	vt8231@hiddenengine.co.uk
+M:	Roger Lucas <vt8231@hiddenengine.co.uk>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	drivers/hwmon/vt8231.c
 
 W1 DALLAS'S 1-WIRE BUS
-P:	Evgeniy Polyakov
-M:	johnpol@2ka.mipt.ru
+M:	Evgeniy Polyakov <johnpol@2ka.mipt.ru>
 S:	Maintained
 F:	Documentation/w1/
 F:	drivers/w1/
 
 W83791D HARDWARE MONITORING DRIVER
-P:	Marc Hulsman
-M:	m.hulsman@tudelft.nl
+M:	Marc Hulsman <m.hulsman@tudelft.nl>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	Documentation/hwmon/w83791d
 F:	drivers/hwmon/w83791d.c
 
 W83793 HARDWARE MONITORING DRIVER
-P:	Rudolf Marek
-M:	r.marek@assembler.cz
+M:	Rudolf Marek <r.marek@assembler.cz>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	Documentation/hwmon/w83793
 F:	drivers/hwmon/w83793.c
 
 W83L51xD SD/MMC CARD INTERFACE DRIVER
-P:	Pierre Ossman
-M:	pierre@ossman.eu
+M:	Pierre Ossman <pierre@ossman.eu>
 S:	Maintained
 F:	drivers/mmc/host/wbsd.*
 
 WATCHDOG DEVICE DRIVERS
-P:	Wim Van Sebroeck
-M:	wim@iguana.be
+M:	Wim Van Sebroeck <wim@iguana.be>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog.git
 S:	Maintained
 F:	Documentation/watchdog/
@@ -6371,8 +5534,7 @@ F:	drivers/watchdog/
 F:	include/linux/watchdog.h
 
 WAVELAN NETWORK DRIVER & WIRELESS EXTENSIONS
-P:	Jean Tourrilhes
-M:	jt@hpl.hp.com
+M:	Jean Tourrilhes <jt@hpl.hp.com>
 L:	linux-wireless@vger.kernel.org
 W:	http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/
 S:	Maintained
@@ -6380,46 +5542,39 @@ F:	Documentation/networking/wavelan.txt
 F:	drivers/net/wireless/wavelan*
 
 WD7000 SCSI DRIVER
-P:	Miroslav Zagorac
-M:	zaga@fly.cc.fer.hr
+M:	Miroslav Zagorac <zaga@fly.cc.fer.hr>
 L:	linux-scsi@vger.kernel.org
 S:	Maintained
 F:	drivers/scsi/wd7000.c
 
 WIMAX STACK
-P:	Inaky Perez-Gonzalez
-M:	inaky.perez-gonzalez@intel.com
+M:	Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
 M:	linux-wimax@intel.com
 L:	wimax@linuxwimax.org
 S:	Supported
 W:	http://linuxwimax.org
 
 WIMEDIA LLC PROTOCOL (WLP) SUBSYSTEM
-P:	David Vrabel
-M:	david.vrabel@csr.com
+M:	David Vrabel <david.vrabel@csr.com>
 S:	Maintained
 F:	include/linux/wlp.h
 F:	drivers/uwb/wlp/
 
 WISTRON LAPTOP BUTTON DRIVER
-P:	Miloslav Trmac
-M:	mitr@volny.cz
+M:	Miloslav Trmac <mitr@volny.cz>
 S:	Maintained
 F:	drivers/input/misc/wistron_btns.c
 
 WL3501 WIRELESS PCMCIA CARD DRIVER
-P:	Arnaldo Carvalho de Melo
-M:	acme@ghostprotocols.net
+M:	Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
 L:	linux-wireless@vger.kernel.org
 W:	http://oops.ghostprotocols.net:81/blog
 S:	Maintained
 F:	drivers/net/wireless/wl3501*
 
 WM97XX TOUCHSCREEN DRIVERS
-P:	Mark Brown
-M:	broonie@opensource.wolfsonmicro.com
-P:	Liam Girdwood
-M:	lrg@slimlogic.co.uk
+M:	Mark Brown <broonie@opensource.wolfsonmicro.com>
+M:	Liam Girdwood <lrg@slimlogic.co.uk>
 L:	linux-input@vger.kernel.org
 T:	git git://opensource.wolfsonmicro.com/linux-2.6-touch
 W:	http://opensource.wolfsonmicro.com/node/7
@@ -6428,8 +5583,7 @@ F:	drivers/input/touchscreen/*wm97*
 F:	include/linux/wm97xx.h
 
 X.25 NETWORK LAYER
-P:	Henner Eisen
-M:	eis@baty.hanse.de
+M:	Henner Eisen <eis@baty.hanse.de>
 L:	linux-x25@vger.kernel.org
 S:	Maintained
 F:	Documentation/networking/x25*
@@ -6437,12 +5591,9 @@ F:	include/net/x25*
 F:	net/x25/
 
 X86 ARCHITECTURE (32-BIT AND 64-BIT)
-P:	Thomas Gleixner
-M:	tglx@linutronix.de
-P:	Ingo Molnar
-M:	mingo@redhat.com
-P:	H. Peter Anvin
-M:	hpa@zytor.com
+M:	Thomas Gleixner <tglx@linutronix.de>
+M:	Ingo Molnar <mingo@redhat.com>
+M:	"H. Peter Anvin" <hpa@zytor.com>
 M:	x86@kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86.git
 S:	Maintained
@@ -6450,10 +5601,8 @@ F:	Documentation/x86/
 F:	arch/x86/
 
 XEN HYPERVISOR INTERFACE
-P:	Jeremy Fitzhardinge
-M:	jeremy@xensource.com
-P:	Chris Wright
-M:	chrisw@sous-sol.org
+M:	Jeremy Fitzhardinge <jeremy@xensource.com>
+M:	Chris Wright <chrisw@sous-sol.org>
 L:	virtualization@lists.osdl.org
 L:	xen-devel@lists.xensource.com
 S:	Supported
@@ -6465,8 +5614,7 @@ F:	include/xen/
 
 XFS FILESYSTEM
 P:	Silicon Graphics Inc
-P:	Felix Blyakher
-M:	felixb@sgi.com
+M:	Felix Blyakher <felixb@sgi.com>
 M:	xfs-masters@oss.sgi.com
 L:	xfs@oss.sgi.com
 W:	http://oss.sgi.com/projects/xfs
@@ -6476,38 +5624,33 @@ F:	Documentation/filesystems/xfs.txt
 F:	fs/xfs/
 
 XILINX SYSTEMACE DRIVER
-P:	Grant Likely
-M:	grant.likely@secretlab.ca
+M:	Grant Likely <grant.likely@secretlab.ca>
 W:	http://www.secretlab.ca/
 S:	Maintained
 F:	drivers/block/xsysace.c
 
 XILINX UARTLITE SERIAL DRIVER
-P:	Peter Korsgaard
-M:	jacmet@sunsite.dk
+M:	Peter Korsgaard <jacmet@sunsite.dk>
 L:	linux-serial@vger.kernel.org
 S:	Maintained
 F:	drivers/serial/uartlite.c
 
 YAM DRIVER FOR AX.25
-P:	Jean-Paul Roubelat
-M:	jpr@f6fbb.org
+M:	Jean-Paul Roubelat <jpr@f6fbb.org>
 L:	linux-hams@vger.kernel.org
 S:	Maintained
 F:	drivers/net/hamradio/yam*
 F:	include/linux/yam.h
 
 YEALINK PHONE DRIVER
-P:	Henk Vergonet
-M:	Henk.Vergonet@gmail.com
+M:	Henk Vergonet <Henk.Vergonet@gmail.com>
 L:	usbb2k-api-dev@nongnu.org
 S:	Maintained
 F:	Documentation/input/yealink.txt
 F:	drivers/input/misc/yealink.*
 
 Z8530 DRIVER FOR AX.25
-P:	Joerg Reuter
-M:	jreuter@yaina.de
+M:	Joerg Reuter <jreuter@yaina.de>
 W:	http://yaina.de/jreuter/
 W:	http://www.qsl.net/dl1bke/
 L:	linux-hams@vger.kernel.org
@@ -6517,10 +5660,8 @@ F:	drivers/net/hamradio/*scc.c
 F:	drivers/net/hamradio/z8530.h
 
 ZD1211RW WIRELESS DRIVER
-P:	Daniel Drake
-M:	dsd@gentoo.org
-P:	Ulrich Kunitz
-M:	kune@deine-taler.de
+M:	Daniel Drake <dsd@gentoo.org>
+M:	Ulrich Kunitz <kune@deine-taler.de>
 W:	http://zd1211.ath.cx/wiki/DriverRewrite
 L:	linux-wireless@vger.kernel.org
 L:	zd1211-devs@lists.sourceforge.net (subscribers-only)
@@ -6536,14 +5677,12 @@ S:	Odd Fixes
 F:	drivers/media/video/zoran/
 
 ZS DECSTATION Z85C30 SERIAL DRIVER
-P:	Maciej W. Rozycki
-M:	macro@linux-mips.org
+M:	"Maciej W. Rozycki" <macro@linux-mips.org>
 S:	Maintained
 F:	drivers/serial/zs.*
 
 THE REST
-P:	Linus Torvalds
-M:	torvalds@linux-foundation.org
+M:	Linus Torvalds <torvalds@linux-foundation.org>
 L:	linux-kernel@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
 S:	Buried alive in reporters

Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 31
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc6
 NAME = Man-Eating Seals of Antiquity
 
 # *DOCUMENTATION*
@@ -140,15 +140,13 @@ _all: modules
 endif
 
 srctree		:= $(if $(KBUILD_SRC),$(KBUILD_SRC),$(CURDIR))
-TOPDIR		:= $(srctree)
-# FIXME - TOPDIR is obsolete, use srctree/objtree
 objtree		:= $(CURDIR)
 src		:= $(srctree)
 obj		:= $(objtree)
 
 VPATH		:= $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD))
 
-export srctree objtree VPATH TOPDIR
+export srctree objtree VPATH
 
 
 # SUBARCH tells the usermode build what the underlying arch is.  That is set
@@ -344,7 +342,9 @@ KBUILD_CPPFLAGS := -D__KERNEL__
 
 KBUILD_CFLAGS   := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
 		   -fno-strict-aliasing -fno-common \
-		   -Werror-implicit-function-declaration
+		   -Werror-implicit-function-declaration \
+		   -Wno-format-security \
+		   -fno-delete-null-pointer-checks
 KBUILD_AFLAGS   := -D__ASSEMBLY__
 
 # Read KERNELRELEASE from include/config/kernel.release (if it exists)
@@ -566,7 +566,7 @@ KBUILD_CFLAGS += $(call cc-option,-Wdeclaration-after-statement,)
 KBUILD_CFLAGS += $(call cc-option,-Wno-pointer-sign,)
 
 # disable invalid "can't wrap" optimizations for signed / pointers
-KBUILD_CFLAGS	+= $(call cc-option,-fwrapv)
+KBUILD_CFLAGS	+= $(call cc-option,-fno-strict-overflow)
 
 # revert to pre-gcc-4.4 behaviour of .eh_frame
 KBUILD_CFLAGS	+= $(call cc-option,-fno-dwarf2-cfi-asm)

arch/alpha/include/asm/percpu.h

@@ -30,7 +30,7 @@ extern unsigned long __per_cpu_offset[NR_CPUS];
 
 #ifndef MODULE
 #define SHIFT_PERCPU_PTR(var, offset) RELOC_HIDE(&per_cpu_var(var), (offset))
-#define PER_CPU_ATTRIBUTES
+#define PER_CPU_DEF_ATTRIBUTES
 #else
 /*
  * To calculate addresses of locally defined variables, GCC uses 32-bit
@@ -49,7 +49,7 @@ extern unsigned long __per_cpu_offset[NR_CPUS];
 		: "=&r"(__ptr), "=&r"(tmp_gp));		\
 	(typeof(&per_cpu_var(var)))(__ptr + (offset)); })
 
-#define PER_CPU_ATTRIBUTES	__used
+#define PER_CPU_DEF_ATTRIBUTES	__used
 
 #endif /* MODULE */
 
@@ -71,7 +71,7 @@ extern unsigned long __per_cpu_offset[NR_CPUS];
 #define __get_cpu_var(var)		per_cpu_var(var)
 #define __raw_get_cpu_var(var)		per_cpu_var(var)
 
-#define PER_CPU_ATTRIBUTES
+#define PER_CPU_DEF_ATTRIBUTES
 
 #endif /* SMP */
 

arch/alpha/include/asm/thread_info.h

@@ -37,6 +37,7 @@ struct thread_info {
 	.task		= &tsk,			\
 	.exec_domain	= &default_exec_domain,	\
 	.addr_limit	= KERNEL_DS,		\
+	.preempt_count	= INIT_PREEMPT_COUNT,	\
 	.restart_block = {			\
 		.fn = do_no_restart_syscall,	\
 	},					\

arch/alpha/include/asm/tlb.h

@@ -9,7 +9,7 @@
 
 #include <asm-generic/tlb.h>
 
-#define __pte_free_tlb(tlb, pte)			pte_free((tlb)->mm, pte)
-#define __pmd_free_tlb(tlb, pmd)			pmd_free((tlb)->mm, pmd)
+#define __pte_free_tlb(tlb, pte, address)		pte_free((tlb)->mm, pte)
+#define __pmd_free_tlb(tlb, pmd, address)		pmd_free((tlb)->mm, pmd)
  
 #endif

arch/alpha/kernel/ptrace.c

@@ -8,7 +8,6 @@
 #include <linux/sched.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/errno.h>
 #include <linux/ptrace.h>
 #include <linux/user.h>

arch/arm/Kconfig.debug

@@ -99,14 +99,6 @@ config DEBUG_CLPS711X_UART2
 	  output to the second serial port on these devices.  Saying N will
 	  cause the debug messages to appear on the first serial port.
 
-config DEBUG_S3C_PORT
-	depends on DEBUG_LL && PLAT_S3C
-	bool "Kernel low-level debugging messages via S3C UART"
-	help
-	  Say Y here if you want debug print routines to go to one of the
-	  S3C internal UARTs. The chosen UART must have been configured
-	  before it is used.
-
 config DEBUG_S3C_UART
 	depends on PLAT_S3C
 	int "S3C UART to use for low-level debug"

arch/arm/boot/compressed/misc.c

@@ -29,7 +29,6 @@ unsigned int __machine_arch_type;
 
 static void putstr(const char *ptr);
 
-#include <linux/compiler.h>
 #include <mach/uncompress.h>
 
 #ifdef CONFIG_DEBUG_ICEDCC

arch/arm/common/clkdev.c

@@ -17,6 +17,7 @@
 #include <linux/err.h>
 #include <linux/string.h>
 #include <linux/mutex.h>
+#include <linux/clk.h>
 
 #include <asm/clkdev.h>
 #include <mach/clkdev.h>

arch/arm/configs/kb9202_defconfig

@@ -1,109 +1,246 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-rc2
-# Sun Aug 14 19:26:59 2005
+# Linux kernel version: 2.6.30-rc8
+# Wed Jun  3 13:52:33 2009
 #
 CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_MMU=y
-CONFIG_UID16=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
-# CONFIG_EXPERIMENTAL is not set
-CONFIG_CLEAN_COMPILE=y
+CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
-# CONFIG_SYSVIPC is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+CONFIG_AUDIT=y
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-# CONFIG_KOBJECT_UEVENT is not set
-# CONFIG_IKCONFIG is not set
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_TRACEPOINTS=y
+CONFIG_MARKERS=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
-# Loadable module support
+# IO Schedulers
 #
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
 
 #
 # System Type
 #
-# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
 # CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
 # CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
 # CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
-CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+
+#
+# Atmel AT91 System-on-Chip
+#
 CONFIG_ARCH_AT91RM9200=y
+# CONFIG_ARCH_AT91SAM9260 is not set
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+# CONFIG_ARCH_AT91SAM9G20 is not set
+# CONFIG_ARCH_AT91CAP9 is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
 
 #
-# AT91RM9200 Implementations
+# AT91RM9200 Board Type
 #
+# CONFIG_MACH_ONEARM is not set
 # CONFIG_ARCH_AT91RM9200DK is not set
 # CONFIG_MACH_AT91RM9200EK is not set
 # CONFIG_MACH_CSB337 is not set
 # CONFIG_MACH_CSB637 is not set
 # CONFIG_MACH_CARMEVA is not set
+# CONFIG_MACH_ATEB9200 is not set
 CONFIG_MACH_KB9200=y
+# CONFIG_MACH_PICOTUX2XX is not set
+# CONFIG_MACH_KAFA is not set
+# CONFIG_MACH_ECBAT91 is not set
+# CONFIG_MACH_YL9200 is not set
+
+#
+# AT91 Board Options
+#
+
+#
+# AT91 Feature Selections
+#
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+CONFIG_AT91_TIMER_HZ=128
+CONFIG_AT91_EARLY_DBGU=y
+# CONFIG_AT91_EARLY_USART0 is not set
+# CONFIG_AT91_EARLY_USART1 is not set
+# CONFIG_AT91_EARLY_USART2 is not set
+# CONFIG_AT91_EARLY_USART3 is not set
+# CONFIG_AT91_EARLY_USART4 is not set
+# CONFIG_AT91_EARLY_USART5 is not set
 
 #
 # Processor Type
 #
 CONFIG_CPU_32=y
 CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4=y
+CONFIG_CPU_32v4T=y
 CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_PABRT_NOIFAR=y
 CONFIG_CPU_CACHE_V4WT=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_COPY_V4WB=y
 CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
 
 #
 # Processor Features
@@ -112,23 +249,48 @@ CONFIG_ARM_THUMB=y
 # CONFIG_CPU_ICACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_OUTER_CACHE is not set
 
 #
 # Bus support
 #
-CONFIG_ISA_DMA_API=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCCARD is not set
 
 #
 # Kernel Features
 #
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=128
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 # CONFIG_LEDS is not set
 CONFIG_ALIGNMENT_TRAP=y
 
@@ -137,8 +299,16 @@ CONFIG_ALIGNMENT_TRAP=y
 #
 CONFIG_ZBOOT_ROM_TEXT=0x10000000
 CONFIG_ZBOOT_ROM_BSS=0x20040000
-CONFIG_ZBOOT_ROM=y
-CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/ram rw initrd=0x20210000,654933"
+# CONFIG_ZBOOT_ROM is not set
+CONFIG_CMDLINE="noinitrd root=/dev/mtdblock0 rootfstype=jffs2 mem=64M"
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
 
 #
 # Floating point emulation
@@ -149,74 +319,251 @@ CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/ram rw initrd=0x20210000,654933"
 #
 CONFIG_FPE_NWFPE=y
 # CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
 
 #
 # Userspace binary formats
 #
 CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_AOUT=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-# CONFIG_ARTHUR is not set
 
 #
 # Power management options
 #
 # CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
 
 #
-# Device Drivers
+# Networking options
 #
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
-# Generic Driver Options
+# Network testing
 #
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-CONFIG_DEBUG_DRIVER=y
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
-# Memory Technology Devices (MTD)
+# Device Drivers
 #
-# CONFIG_MTD is not set
 
 #
-# Parallel port support
+# Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_ATMEL=y
+# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
+CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+CONFIG_MTD_UBI_GLUEBI=y
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=y
+# CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+CONFIG_ATMEL_TCLIB=y
+CONFIG_ATMEL_TCB_CLKSRC=y
+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
+CONFIG_ATMEL_SSC=y
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 
 #
-# IO Schedulers
+# EEPROM support
 #
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
 
 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
 
 #
@@ -232,145 +579,87 @@ CONFIG_CHR_DEV_SG=y
 #
 # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
 #
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
-# SCSI Transport Attributes
+# SCSI Transports
 #
-# CONFIG_SCSI_SPI_ATTRS is not set
+CONFIG_SCSI_SPI_ATTRS=m
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_ARM_AT91_ETHER=y
+# CONFIG_AX88796 is not set
 # CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 
 #
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
+# Wireless LAN
 #
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
 
 #
-# Wireless LAN (non-hamradio)
+# Enable WiMAX (Networking options) to see the WiMAX drivers
 #
-# CONFIG_NET_RADIO is not set
 
 #
-# Wan interfaces
+# USB Network Adapters
 #
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-
-#
-# ISDN subsystem
-#
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 # CONFIG_ISDN is not set
 
 #
 # Input device support
 #
 CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -380,7 +669,6 @@ CONFIG_INPUT_MOUSEDEV=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -390,23 +678,25 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
 #
 # Hardware I/O ports
 #
-CONFIG_SERIO=y
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO is not set
 # CONFIG_GAMEPORT is not set
 
 #
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -419,215 +709,362 @@ CONFIG_HW_CONSOLE=y
 #
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
 
 #
-# IPMI
+# Memory mapped GPIO expanders:
 #
-# CONFIG_IPMI_HANDLER is not set
 
 #
-# Watchdog Cards
+# I2C GPIO expanders:
 #
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_AT91RM9200_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
 
 #
-# Ftape, the floppy tape device driver
+# PCI GPIO expanders:
 #
-# CONFIG_RAW_DRIVER is not set
 
 #
-# TPM devices
+# SPI GPIO expanders:
 #
-# CONFIG_AT91_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
 
 #
-# I2C support
+# Watchdog Device Drivers
 #
-# CONFIG_I2C is not set
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_AT91RM9200_WATCHDOG=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
-# Misc devices
+# Sonics Silicon Backplane
 #
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
-# Digital Video Broadcasting Devices
+# Multimedia drivers
 #
-# CONFIG_DVB is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
-# CONFIG_FB is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+CONFIG_FONT_MINI_4x6=y
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+# CONFIG_LOGO is not set
 # CONFIG_SOUND is not set
-
-#
-# USB support
-#
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-CONFIG_USB_DEBUG=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
 #
 CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
 
 #
 # USB Device Class drivers
 #
-# CONFIG_USB_BLUETOOTH_TTY is not set
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
-CONFIG_USB_STORAGE=y
-CONFIG_USB_STORAGE_DEBUG=y
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-
-#
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
 
 #
-# USB HID Boot Protocol drivers
+# also be needed; see USB_STORAGE Help for more info
 #
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+CONFIG_USB_LIBUSUAL=y
 
 #
 # USB Imaging devices
 #
+# CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
 
 #
-# USB Multimedia devices
+# USB port drivers
 #
-# CONFIG_USB_DABUSB is not set
+# CONFIG_USB_SERIAL is not set
 
 #
-# Video4Linux support is needed for USB Multimedia device support
+# USB Miscellaneous drivers
 #
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
 
 #
-# USB Network Adapters
+# OTG and related infrastructure
 #
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_MON is not set
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
 
 #
-# USB port drivers
+# MMC/SD/SDIO Card Drivers
 #
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
 
 #
-# USB Serial Converter support
+# MMC/SD/SDIO Host Controller Drivers
 #
-# CONFIG_USB_SERIAL is not set
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_AT91=y
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
 
 #
-# USB Miscellaneous drivers
+# RTC interfaces
 #
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
 
 #
-# USB DSL modem support
+# SPI RTC drivers
 #
 
 #
-# USB Gadget Support
+# Platform RTC drivers
 #
-# CONFIG_USB_GADGET is not set
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
 
 #
-# MMC/SD Card support
+# on-CPU RTC drivers
 #
-# CONFIG_MMC is not set
+CONFIG_RTC_DRV_AT91RM9200=y
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
 #
 CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
-# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
 
 #
-# XFS support
+# Caches
 #
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=y
-CONFIG_AUTOFS4_FS=y
+# CONFIG_FSCACHE is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -639,7 +1076,7 @@ CONFIG_AUTOFS4_FS=y
 # DOS/FAT/NT Filesystems
 #
 CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
+# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
 CONFIG_FAT_DEFAULT_CODEPAGE=437
 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
@@ -649,53 +1086,70 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 # Pseudo filesystems
 #
 CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
-CONFIG_DEVPTS_FS_XATTR=y
-# CONFIG_DEVPTS_FS_SECURITY is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_CONFIGFS_FS=y
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
 # CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_UBIFS_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFSD is not set
+# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
 # CONFIG_NLS_CODEPAGE_737 is not set
 # CONFIG_NLS_CODEPAGE_775 is not set
@@ -719,7 +1173,7 @@ CONFIG_NLS_CODEPAGE_437=y
 # CONFIG_NLS_ISO8859_8 is not set
 # CONFIG_NLS_CODEPAGE_1250 is not set
 # CONFIG_NLS_CODEPAGE_1251 is not set
-CONFIG_NLS_ASCII=y
+# CONFIG_NLS_ASCII is not set
 # CONFIG_NLS_ISO8859_1 is not set
 # CONFIG_NLS_ISO8859_2 is not set
 # CONFIG_NLS_ISO8859_3 is not set
@@ -733,47 +1187,119 @@ CONFIG_NLS_ASCII=y
 # CONFIG_NLS_ISO8859_15 is not set
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_MAGIC_SYSRQ is not set
-CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
+CONFIG_AUDIT_GENERIC=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y

arch/arm/configs/mx27_defconfig

@@ -1,15 +1,15 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc1
-# Wed Apr  8 10:18:06 2009
+# Linux kernel version: 2.6.31-rc4
+# Fri Jul 24 16:08:06 2009
 #
 CONFIG_ARM=y
+CONFIG_HAVE_PWM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -18,14 +18,13 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_ARCH_MTD_XIP=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -85,7 +84,12 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Performance Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_COMPAT_BRK is not set
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -99,6 +103,12 @@ CONFIG_KPROBES=y
 CONFIG_KRETPROBES=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -111,7 +121,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -138,13 +148,14 @@ CONFIG_FREEZER=y
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
+CONFIG_ARCH_MXC=y
+# CONFIG_ARCH_STMP3XXX is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
@@ -153,25 +164,25 @@ CONFIG_FREEZER=y
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
 # CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
 # CONFIG_ARCH_LOKI is not set
 # CONFIG_ARCH_MV78XX0 is not set
-CONFIG_ARCH_MXC=y
 # CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_MSM is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_S3C64XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
 
 #
 # Freescale MXC Implementations
@@ -188,6 +199,8 @@ CONFIG_MACH_MX27=y
 CONFIG_MACH_MX27ADS=y
 CONFIG_MACH_PCM038=y
 CONFIG_MACH_PCM970_BASEBOARD=y
+CONFIG_MACH_MX27_3DS=y
+CONFIG_MACH_MX27LITE=y
 CONFIG_MXC_IRQ_PRIOR=y
 CONFIG_MXC_PWM=y
 
@@ -213,7 +226,6 @@ CONFIG_ARM_THUMB=y
 # CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
 # CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
 CONFIG_COMMON_CLKDEV=y
 
 #
@@ -238,7 +250,6 @@ CONFIG_PREEMPT=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
 CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
 # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
 # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
 # CONFIG_HIGHMEM is not set
@@ -253,10 +264,11 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
 
 #
 # Boot options
@@ -361,6 +373,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -474,7 +487,16 @@ CONFIG_MTD_PHYSMAP=y
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+CONFIG_MTD_NAND_MXC=y
 # CONFIG_MTD_ONENAND is not set
 
 #
@@ -485,7 +507,15 @@ CONFIG_MTD_PHYSMAP=y
 #
 # UBI - Unsorted block images
 #
-# CONFIG_MTD_UBI is not set
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
@@ -494,7 +524,21 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MISC_DEVICES is not set
+# CONFIG_MG_DISK is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=y
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -508,7 +552,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -534,6 +577,8 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
 CONFIG_FEC=y
 # CONFIG_FEC2 is not set
 # CONFIG_NETDEV_1000 is not set
@@ -580,6 +625,11 @@ CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
@@ -592,6 +642,7 @@ CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
 # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
 # CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
 # CONFIG_INPUT_MISC is not set
 
 #
@@ -644,6 +695,7 @@ CONFIG_I2C_HELPER_AUTO=y
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_GPIO is not set
 CONFIG_I2C_IMX=y
 # CONFIG_I2C_OCORES is not set
@@ -668,7 +720,6 @@ CONFIG_I2C_IMX=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -719,6 +770,7 @@ CONFIG_W1=y
 #
 # CONFIG_W1_MASTER_DS2482 is not set
 CONFIG_W1_MASTER_MXC=y
+# CONFIG_W1_MASTER_DS1WM is not set
 # CONFIG_W1_MASTER_GPIO is not set
 
 #
@@ -753,54 +805,16 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_TPS65010 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
 # CONFIG_MFD_TC6393XB is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-CONFIG_VIDEO_DEV=y
-CONFIG_VIDEO_V4L2_COMMON=y
-CONFIG_VIDEO_ALLOW_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-# CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=y
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=y
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=y
-CONFIG_MEDIA_TUNER_TDA8290=y
-CONFIG_MEDIA_TUNER_TDA9887=y
-CONFIG_MEDIA_TUNER_TEA5761=y
-CONFIG_MEDIA_TUNER_TEA5767=y
-CONFIG_MEDIA_TUNER_MT20XX=y
-CONFIG_MEDIA_TUNER_XC2028=y
-CONFIG_MEDIA_TUNER_XC5000=y
-CONFIG_MEDIA_TUNER_MC44S803=y
-CONFIG_VIDEO_V4L2=y
-CONFIG_VIDEO_V4L1=y
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_SOC_CAMERA is not set
-# CONFIG_RADIO_ADAPTERS is not set
-# CONFIG_DAB is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -917,6 +931,7 @@ CONFIG_RTC_DRV_PCF8563=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -962,12 +977,15 @@ CONFIG_RTC_DRV_PCF8563=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
@@ -1021,6 +1039,12 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=y
+# CONFIG_UBIFS_FS_XATTR is not set
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1119,25 +1143,11 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
 CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_FTRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
@@ -1151,16 +1161,104 @@ CONFIG_ARM_UNWIND=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
 CONFIG_BINARY_PRINTF=y
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_RATIONAL=y
 CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
+CONFIG_CRC16=y
 # CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
@@ -1168,6 +1266,8 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y

arch/arm/configs/mx3_defconfig

@@ -1,15 +1,15 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc1
-# Wed Apr  8 11:06:37 2009
+# Linux kernel version: 2.6.31-rc4
+# Tue Jul 28 14:11:34 2009
 #
 CONFIG_ARM=y
+CONFIG_HAVE_PWM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -18,14 +18,13 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_ARCH_MTD_XIP=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -86,7 +85,12 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Performance Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -97,6 +101,11 @@ CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -109,7 +118,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -136,13 +145,14 @@ CONFIG_FREEZER=y
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
+CONFIG_ARCH_MXC=y
+# CONFIG_ARCH_STMP3XXX is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
@@ -151,25 +161,25 @@ CONFIG_FREEZER=y
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
 # CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
 # CONFIG_ARCH_LOKI is not set
 # CONFIG_ARCH_MV78XX0 is not set
-CONFIG_ARCH_MXC=y
 # CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_MSM is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_S3C64XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
 
 #
 # Freescale MXC Implementations
@@ -178,6 +188,7 @@ CONFIG_ARCH_MXC=y
 # CONFIG_ARCH_MX2 is not set
 CONFIG_ARCH_MX3=y
 CONFIG_ARCH_MX31=y
+CONFIG_ARCH_MX35=y
 
 #
 # MX3 platforms:
@@ -185,12 +196,19 @@ CONFIG_ARCH_MX31=y
 CONFIG_MACH_MX31ADS=y
 CONFIG_MACH_MX31ADS_WM1133_EV1=y
 CONFIG_MACH_PCM037=y
+CONFIG_MACH_PCM037_EET=y
 CONFIG_MACH_MX31LITE=y
 CONFIG_MACH_MX31_3DS=y
 CONFIG_MACH_MX31MOBOARD=y
+CONFIG_MACH_MX31LILLY=y
 CONFIG_MACH_QONG=y
+CONFIG_MACH_PCM043=y
+CONFIG_MACH_ARMADILLO5X0=y
+CONFIG_MACH_MX35_3DS=y
 CONFIG_MXC_IRQ_PRIOR=y
 CONFIG_MXC_PWM=y
+CONFIG_ARCH_HAS_RNGA=y
+CONFIG_ARCH_MXC_IOMUX_V3=y
 
 #
 # Processor Type
@@ -218,6 +236,7 @@ CONFIG_ARM_THUMB=y
 # CONFIG_CPU_BPREDICT_DISABLE is not set
 CONFIG_OUTER_CACHE=y
 CONFIG_CACHE_L2X0=y
+# CONFIG_ARM_ERRATA_411920 is not set
 CONFIG_COMMON_CLKDEV=y
 
 #
@@ -242,7 +261,6 @@ CONFIG_PREEMPT=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
 CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
 # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
 # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
 # CONFIG_HIGHMEM is not set
@@ -257,10 +275,11 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
 
 #
 # Boot options
@@ -362,6 +381,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -465,7 +485,16 @@ CONFIG_MTD_PHYSMAP=y
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+CONFIG_MTD_NAND_MXC=y
 # CONFIG_MTD_ONENAND is not set
 
 #
@@ -476,10 +505,30 @@ CONFIG_MTD_PHYSMAP=y
 #
 # UBI - Unsorted block images
 #
-# CONFIG_MTD_UBI is not set
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
 # CONFIG_PARPORT is not set
 # CONFIG_BLK_DEV is not set
-# CONFIG_MISC_DEVICES is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=y
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -493,7 +542,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -528,7 +576,7 @@ CONFIG_MII=y
 # CONFIG_ETHOC is not set
 # CONFIG_SMC911X is not set
 CONFIG_SMSC911X=y
-# CONFIG_DNET is not set
+CONFIG_DNET=y
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -537,8 +585,10 @@ CONFIG_SMSC911X=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
-CONFIG_CS89x0=y
-CONFIG_CS89x0_NONISA_IRQ=y
+# CONFIG_CS89x0 is not set
+# CONFIG_KS8842 is not set
+CONFIG_FEC=y
+# CONFIG_FEC2 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 
@@ -609,6 +659,7 @@ CONFIG_I2C_HELPER_AUTO=y
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_GPIO is not set
 CONFIG_I2C_IMX=y
 # CONFIG_I2C_OCORES is not set
@@ -633,7 +684,6 @@ CONFIG_I2C_IMX=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -669,6 +719,7 @@ CONFIG_W1=y
 #
 # CONFIG_W1_MASTER_DS2482 is not set
 CONFIG_W1_MASTER_MXC=y
+# CONFIG_W1_MASTER_DS1WM is not set
 # CONFIG_W1_MASTER_GPIO is not set
 
 #
@@ -703,6 +754,8 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_TPS65010 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
 # CONFIG_MFD_TC6393XB is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
@@ -711,10 +764,8 @@ CONFIG_MFD_WM8350_CONFIG_MODE_0=y
 CONFIG_MFD_WM8352_CONFIG_MODE_0=y
 CONFIG_MFD_WM8350_I2C=y
 # CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
+# CONFIG_AB3100_CORE is not set
+CONFIG_MEDIA_SUPPORT=y
 
 #
 # Multimedia core support
@@ -758,8 +809,10 @@ CONFIG_SOC_CAMERA_MT9T031=y
 CONFIG_SOC_CAMERA_MT9V022=y
 CONFIG_SOC_CAMERA_TW9910=y
 # CONFIG_SOC_CAMERA_PLATFORM is not set
-# CONFIG_SOC_CAMERA_OV772X is not set
+CONFIG_SOC_CAMERA_OV772X=y
+CONFIG_MX3_VIDEO=y
 CONFIG_VIDEO_MX3=y
+# CONFIG_VIDEO_SH_MOBILE_CEU is not set
 # CONFIG_RADIO_ADAPTERS is not set
 # CONFIG_DAB is not set
 
@@ -847,8 +900,11 @@ CONFIG_REGULATOR=y
 # CONFIG_REGULATOR_DEBUG is not set
 # CONFIG_REGULATOR_FIXED_VOLTAGE is not set
 # CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
 # CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
 CONFIG_REGULATOR_WM8350=y
+# CONFIG_REGULATOR_LP3971 is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -861,10 +917,12 @@ CONFIG_REGULATOR_WM8350=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -921,6 +979,12 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=y
+# CONFIG_UBIFS_FS_XATTR is not set
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -937,6 +1001,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -979,22 +1044,7 @@ CONFIG_FRAME_WARN=1024
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_ARM_UNWIND=y
@@ -1094,9 +1144,9 @@ CONFIG_CRYPTO_DES=y
 #
 # Compression
 #
-# CONFIG_CRYPTO_DEFLATE is not set
+CONFIG_CRYPTO_DEFLATE=y
 # CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_LZO=y
 
 #
 # Random Number Generation
@@ -1109,9 +1159,10 @@ CONFIG_CRYPTO_HW=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_RATIONAL=y
 CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
+CONFIG_CRC16=y
 # CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
@@ -1119,6 +1170,8 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y

arch/arm/configs/omap3_evm_defconfig

@@ -1107,7 +1107,7 @@ CONFIG_USB_ZERO=m
 CONFIG_USB_OTG_UTILS=y
 # CONFIG_USB_GPIO_VBUS is not set
 # CONFIG_ISP1301_OMAP is not set
-CONFIG_TWL4030_USB=y
+# CONFIG_TWL4030_USB is not set
 # CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set

arch/arm/configs/s3c2410_defconfig

@@ -260,6 +260,7 @@ CONFIG_MACH_NEXCODER_2440=y
 CONFIG_SMDK2440_CPU2440=y
 CONFIG_MACH_AT2440EVB=y
 CONFIG_CPU_S3C2442=y
+CONFIG_MACH_MINI2440=y
 
 #
 # S3C2442 Machines
@@ -2298,7 +2299,6 @@ CONFIG_DEBUG_ERRORS=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
 # CONFIG_DEBUG_ICEDCC is not set
-CONFIG_DEBUG_S3C_PORT=y
 CONFIG_DEBUG_S3C_UART=0
 
 #

arch/arm/configs/s3c6400_defconfig

@@ -816,7 +816,6 @@ CONFIG_DEBUG_ERRORS=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
 # CONFIG_DEBUG_ICEDCC is not set
-CONFIG_DEBUG_S3C_PORT=y
 CONFIG_DEBUG_S3C_UART=0
 
 #

arch/arm/configs/tct_hammer_defconfig

@@ -857,7 +857,6 @@ CONFIG_DEBUG_ERRORS=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
 # CONFIG_DEBUG_ICEDCC is not set
-# CONFIG_DEBUG_S3C_PORT is not set
 CONFIG_DEBUG_S3C_UART=0
 
 #

arch/arm/configs/u300_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc6
-# Mon Jun  1 09:18:22 2009
+# Linux kernel version: 2.6.31-rc3
+# Thu Jul 16 23:36:10 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -9,7 +9,6 @@ CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -18,13 +17,12 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -68,7 +66,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -81,8 +78,13 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 # CONFIG_AIO is not set
+
+#
+# Performance Counters
+#
 # CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -94,6 +96,10 @@ CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -106,7 +112,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+# CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -138,9 +144,9 @@ CONFIG_DEFAULT_IOSCHED="deadline"
 # CONFIG_ARCH_EP93XX is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
 # CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
@@ -216,8 +222,8 @@ CONFIG_ARM_THUMB=y
 # CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
 # CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
 CONFIG_ARM_VIC=y
+CONFIG_ARM_VIC_NR=2
 CONFIG_COMMON_CLKDEV=y
 
 #
@@ -243,7 +249,6 @@ CONFIG_PREEMPT=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
 CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
 # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
 # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
 # CONFIG_HIGHMEM is not set
@@ -258,17 +263,18 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
 
 #
 # Boot options
 #
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/mtdblock2 rw rootfstype=yaffs2 console=ttyAMA0,115200n8 ab3100.force=0,0x48 mtdparts=u300nand:128k@0x0(bootrecords)ro,8064k@128k(free)ro,253952k@8192k(platform) lpj=515072"
+CONFIG_CMDLINE="root=/dev/ram0 rw rootfstype=rootfs console=ttyAMA0,115200n8 lpj=515072"
 # CONFIG_XIP_KERNEL is not set
 # CONFIG_KEXEC is not set
 
@@ -359,6 +365,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -497,6 +504,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_AT25 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
@@ -533,12 +541,14 @@ CONFIG_INPUT_EVDEV=y
 #
 CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -597,9 +607,11 @@ CONFIG_I2C_HELPER_AUTO=y
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
+CONFIG_I2C_STU300=y
 
 #
 # External I2C/SMBus adapter drivers
@@ -620,7 +632,6 @@ CONFIG_I2C_HELPER_AUTO=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -635,6 +646,7 @@ CONFIG_SPI_MASTER=y
 #
 # CONFIG_SPI_BITBANG is not set
 # CONFIG_SPI_GPIO is not set
+CONFIG_SPI_PL022=y
 
 #
 # SPI Protocol Masters
@@ -647,6 +659,7 @@ CONFIG_POWER_SUPPLY=y
 # CONFIG_PDA_POWER is not set
 # CONFIG_BATTERY_DS2760 is not set
 # CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_BATTERY_MAX17040 is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
@@ -657,6 +670,7 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
+CONFIG_COH901327_WATCHDOG=y
 CONFIG_SSB_POSSIBLE=y
 
 #
@@ -678,22 +692,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+CONFIG_AB3100_CORE=y
+# CONFIG_EZX_PCAP is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -760,6 +761,11 @@ CONFIG_SND_JACK=y
 # CONFIG_SND_VERBOSE_PROCFS is not set
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
 # CONFIG_SND_DRIVERS is not set
 # CONFIG_SND_ARM is not set
 # CONFIG_SND_SPI is not set
@@ -770,7 +776,7 @@ CONFIG_SND_SOC_I2C_AND_SPI=y
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_DEBUG=y
 # CONFIG_MMC_UNSAFE_RESUME is not set
 
 #
@@ -797,7 +803,7 @@ CONFIG_LEDS_CLASS=y
 #
 # CONFIG_LEDS_PCA9532 is not set
 # CONFIG_LEDS_GPIO is not set
-# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_LP3944 is not set
 # CONFIG_LEDS_PCA955X is not set
 # CONFIG_LEDS_DAC124S085 is not set
 # CONFIG_LEDS_BD2802 is not set
@@ -845,6 +851,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -887,7 +894,10 @@ CONFIG_REGULATOR=y
 # CONFIG_REGULATOR_DEBUG is not set
 # CONFIG_REGULATOR_FIXED_VOLTAGE is not set
 # CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
 # CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_LP3971 is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -900,16 +910,19 @@ CONFIG_REGULATOR=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=y
+# CONFIG_CUSE is not set
 
 #
 # Caches
@@ -1033,6 +1046,7 @@ CONFIG_TIMER_STATS=y
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_PREEMPT is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
@@ -1063,18 +1077,16 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_PAGE_POISONING is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set

arch/arm/include/asm/atomic.h

@@ -159,8 +159,6 @@ static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr)
 
 #else /* ARM_ARCH_6 */
 
-#include <asm/system.h>
-
 #ifdef CONFIG_SMP
 #error SMP not supported on pre-ARMv6 CPUs
 #endif

arch/arm/include/asm/page.h

@@ -12,7 +12,7 @@
 
 /* PAGE_SHIFT determines the page size */
 #define PAGE_SHIFT		12
-#define PAGE_SIZE		(1UL << PAGE_SHIFT)
+#define PAGE_SIZE		(_AC(1,UL) << PAGE_SHIFT)
 #define PAGE_MASK		(~(PAGE_SIZE-1))
 
 #ifndef __ASSEMBLY__

arch/arm/include/asm/pgtable.h

@@ -285,15 +285,6 @@ extern struct page *empty_zero_page;
 #define pte_young(pte)		(pte_val(pte) & L_PTE_YOUNG)
 #define pte_special(pte)	(0)
 
-/*
- * The following only works if pte_present() is not true.
- */
-#define pte_file(pte)		(pte_val(pte) & L_PTE_FILE)
-#define pte_to_pgoff(x)		(pte_val(x) >> 2)
-#define pgoff_to_pte(x)		__pte(((x) << 2) | L_PTE_FILE)
-
-#define PTE_FILE_MAX_BITS	30
-
 #define PTE_BIT_FUNC(fn,op) \
 static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; }
 
@@ -384,16 +375,50 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 
 extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
 
-/* Encode and decode a swap entry.
+/*
+ * Encode and decode a swap entry.  Swap entries are stored in the Linux
+ * page tables as follows:
  *
- * We support up to 32GB of swap on 4k machines
+ *   3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
+ *   1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+ *   <--------------- offset --------------------> <--- type --> 0 0
+ *
+ * This gives us up to 127 swap files and 32GB per swap file.  Note that
+ * the offset field is always non-zero.
  */
-#define __swp_type(x)		(((x).val >> 2) & 0x7f)
-#define __swp_offset(x)		((x).val >> 9)
-#define __swp_entry(type,offset) ((swp_entry_t) { ((type) << 2) | ((offset) << 9) })
+#define __SWP_TYPE_SHIFT	2
+#define __SWP_TYPE_BITS		7
+#define __SWP_TYPE_MASK		((1 << __SWP_TYPE_BITS) - 1)
+#define __SWP_OFFSET_SHIFT	(__SWP_TYPE_BITS + __SWP_TYPE_SHIFT)
+
+#define __swp_type(x)		(((x).val >> __SWP_TYPE_SHIFT) & __SWP_TYPE_MASK)
+#define __swp_offset(x)		((x).val >> __SWP_OFFSET_SHIFT)
+#define __swp_entry(type,offset) ((swp_entry_t) { ((type) << __SWP_TYPE_SHIFT) | ((offset) << __SWP_OFFSET_SHIFT) })
+
 #define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
 #define __swp_entry_to_pte(swp)	((pte_t) { (swp).val })
 
+/*
+ * It is an error for the kernel to have more swap files than we can
+ * encode in the PTEs.  This ensures that we know when MAX_SWAPFILES
+ * is increased beyond what we presently support.
+ */
+#define MAX_SWAPFILES_CHECK() BUILD_BUG_ON(MAX_SWAPFILES_SHIFT > __SWP_TYPE_BITS)
+
+/*
+ * Encode and decode a file entry.  File entries are stored in the Linux
+ * page tables as follows:
+ *
+ *   3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
+ *   1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+ *   <------------------------ offset -------------------------> 1 0
+ */
+#define pte_file(pte)		(pte_val(pte) & L_PTE_FILE)
+#define pte_to_pgoff(x)		(pte_val(x) >> 2)
+#define pgoff_to_pte(x)		__pte(((x) << 2) | L_PTE_FILE)
+
+#define PTE_FILE_MAX_BITS	30
+
 /* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
 /* FIXME: this is not correct */
 #define kern_addr_valid(addr)	(1)

arch/arm/include/asm/thread_info.h

@@ -73,7 +73,7 @@ struct thread_info {
 	.task		= &tsk,						\
 	.exec_domain	= &default_exec_domain,				\
 	.flags		= 0,						\
-	.preempt_count	= 1,						\
+	.preempt_count	= INIT_PREEMPT_COUNT,				\
 	.addr_limit	= KERNEL_DS,					\
 	.cpu_domain	= domain_val(DOMAIN_USER, DOMAIN_MANAGER) |	\
 			  domain_val(DOMAIN_KERNEL, DOMAIN_MANAGER) |	\

arch/arm/include/asm/tlb.h

@@ -102,8 +102,8 @@ tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma)
 }
 
 #define tlb_remove_page(tlb,page)	free_page_and_swap_cache(page)
-#define pte_free_tlb(tlb, ptep)		pte_free((tlb)->mm, ptep)
-#define pmd_free_tlb(tlb, pmdp)		pmd_free((tlb)->mm, pmdp)
+#define pte_free_tlb(tlb, ptep, addr)	pte_free((tlb)->mm, ptep)
+#define pmd_free_tlb(tlb, pmdp, addr)	pmd_free((tlb)->mm, pmdp)
 
 #define tlb_migrate_finish(mm)		do { } while (0)
 

arch/arm/kernel/entry-common.S

@@ -148,7 +148,7 @@ trace:
 	sub r0, r0, #MCOUNT_INSN_SIZE
 	mov lr, pc
 	mov pc, r2
-	mov lr, r1				@ restore lr
+	ldr lr, [fp, #-4]			@ restore lr
 	ldmia sp!, {r0-r3, pc}
 
 #endif /* CONFIG_DYNAMIC_FTRACE */

arch/arm/kernel/irq.c

@@ -98,17 +98,6 @@ unlock:
 	return 0;
 }
 
-/* Handle bad interrupts */
-static struct irq_desc bad_irq_desc = {
-	.handle_irq = handle_bad_irq,
-	.lock = __SPIN_LOCK_UNLOCKED(bad_irq_desc.lock),
-};
-
-#ifdef CONFIG_CPUMASK_OFFSTACK
-/* We are not allocating bad_irq_desc.affinity or .pending_mask */
-#error "ARM architecture does not support CONFIG_CPUMASK_OFFSTACK."
-#endif
-
 /*
  * do_IRQ handles all hardware IRQ's.  Decoded IRQs should not
  * come via this function.  Instead, they should provide their
@@ -124,10 +113,13 @@ asmlinkage void __exception asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
 	 * Some hardware gives randomly wrong interrupts.  Rather
 	 * than crashing, do something sensible.
 	 */
-	if (irq >= NR_IRQS)
-		handle_bad_irq(irq, &bad_irq_desc);
-	else
+	if (unlikely(irq >= NR_IRQS)) {
+		if (printk_ratelimit())
+			printk(KERN_WARNING "Bad IRQ%u\n", irq);
+		ack_bad_irq(irq);
+	} else {
 		generic_handle_irq(irq);
+	}
 
 	/* AT91 specific workaround */
 	irq_finish(irq);
@@ -165,10 +157,6 @@ void __init init_IRQ(void)
 	for (irq = 0; irq < NR_IRQS; irq++)
 		irq_desc[irq].status |= IRQ_NOREQUEST | IRQ_NOPROBE;
 
-#ifdef CONFIG_SMP
-	cpumask_setall(bad_irq_desc.affinity);
-	bad_irq_desc.node = smp_processor_id();
-#endif
 	init_arch_irq();
 }
 

arch/arm/kernel/signal.c

@@ -133,7 +133,7 @@ sys_sigaction(int sig, const struct old_sigaction __user *act,
 }
 
 #ifdef CONFIG_CRUNCH
-static int preserve_crunch_context(struct crunch_sigframe *frame)
+static int preserve_crunch_context(struct crunch_sigframe __user *frame)
 {
 	char kbuf[sizeof(*frame) + 8];
 	struct crunch_sigframe *kframe;
@@ -146,7 +146,7 @@ static int preserve_crunch_context(struct crunch_sigframe *frame)
 	return __copy_to_user(frame, kframe, sizeof(*frame));
 }
 
-static int restore_crunch_context(struct crunch_sigframe *frame)
+static int restore_crunch_context(struct crunch_sigframe __user *frame)
 {
 	char kbuf[sizeof(*frame) + 8];
 	struct crunch_sigframe *kframe;

arch/arm/kernel/vmlinux.lds.S

@@ -6,6 +6,7 @@
 #include <asm-generic/vmlinux.lds.h>
 #include <asm/thread_info.h>
 #include <asm/memory.h>
+#include <asm/page.h>
 	
 OUTPUT_ARCH(arm)
 ENTRY(stext)
@@ -63,7 +64,7 @@ SECTIONS
 			usr/built-in.o(.init.ramfs)
 		__initramfs_end = .;
 #endif
-		. = ALIGN(4096);
+		. = ALIGN(PAGE_SIZE);
 		__per_cpu_load = .;
 		__per_cpu_start = .;
 			*(.data.percpu.page_aligned)
@@ -73,7 +74,7 @@ SECTIONS
 #ifndef CONFIG_XIP_KERNEL
 		__init_begin = _stext;
 		INIT_DATA
-		. = ALIGN(4096);
+		. = ALIGN(PAGE_SIZE);
 		__init_end = .;
 #endif
 	}
@@ -118,7 +119,7 @@ SECTIONS
 		*(.got)			/* Global offset table		*/
 	}
 
-	RODATA
+	RO_DATA(PAGE_SIZE)
 
 	_etext = .;			/* End of text and rodata section */
 
@@ -158,17 +159,17 @@ SECTIONS
 		*(.data.init_task)
 
 #ifdef CONFIG_XIP_KERNEL
-		. = ALIGN(4096);
+		. = ALIGN(PAGE_SIZE);
 		__init_begin = .;
 		INIT_DATA
-		. = ALIGN(4096);
+		. = ALIGN(PAGE_SIZE);
 		__init_end = .;
 #endif
 
-		. = ALIGN(4096);
+		. = ALIGN(PAGE_SIZE);
 		__nosave_begin = .;
 		*(.data.nosave)
-		. = ALIGN(4096);
+		. = ALIGN(PAGE_SIZE);
 		__nosave_end = .;
 
 		/*

arch/arm/mach-at91/board-sam9g20ek.c

@@ -24,6 +24,8 @@
 #include <linux/platform_device.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/at73c213.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
 #include <linux/clk.h>
 
 #include <mach/hardware.h>
@@ -218,6 +220,56 @@ static struct gpio_led ek_leds[] = {
 	}
 };
 
+
+/*
+ * GPIO Buttons
+ */
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button ek_buttons[] = {
+	{
+		.gpio		= AT91_PIN_PA30,
+		.code		= BTN_3,
+		.desc		= "Button 3",
+		.active_low	= 1,
+		.wakeup		= 1,
+	},
+	{
+		.gpio		= AT91_PIN_PA31,
+		.code		= BTN_4,
+		.desc		= "Button 4",
+		.active_low	= 1,
+		.wakeup		= 1,
+	}
+};
+
+static struct gpio_keys_platform_data ek_button_data = {
+	.buttons	= ek_buttons,
+	.nbuttons	= ARRAY_SIZE(ek_buttons),
+};
+
+static struct platform_device ek_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &ek_button_data,
+	}
+};
+
+static void __init ek_add_device_buttons(void)
+{
+	at91_set_gpio_input(AT91_PIN_PA30, 1);	/* btn3 */
+	at91_set_deglitch(AT91_PIN_PA30, 1);
+	at91_set_gpio_input(AT91_PIN_PA31, 1);	/* btn4 */
+	at91_set_deglitch(AT91_PIN_PA31, 1);
+
+	platform_device_register(&ek_button_device);
+}
+#else
+static void __init ek_add_device_buttons(void) {}
+#endif
+
+
 static struct i2c_board_info __initdata ek_i2c_devices[] = {
 	{
 		I2C_BOARD_INFO("24c512", 0x50),
@@ -245,6 +297,8 @@ static void __init ek_board_init(void)
 	at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
 	/* LEDs */
 	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
+	/* Push Buttons */
+	ek_add_device_buttons();
 	/* PCK0 provides MCLK to the WM8731 */
 	at91_set_B_periph(AT91_PIN_PC1, 0);
 	/* SSC (for WM8731) */

arch/arm/mach-at91/board-sam9rlek.c

@@ -186,19 +186,21 @@ static struct fb_monspecs at91fb_default_monspecs = {
 static void at91_lcdc_power_control(int on)
 {
 	if (on)
-		at91_set_gpio_value(AT91_PIN_PA30, 0);	/* power up */
+		at91_set_gpio_value(AT91_PIN_PC1, 0);	/* power up */
 	else
-		at91_set_gpio_value(AT91_PIN_PA30, 1);	/* power down */
+		at91_set_gpio_value(AT91_PIN_PC1, 1);	/* power down */
 }
 
 /* Driver datas */
 static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
+	.lcdcon_is_backlight            = true,
 	.default_bpp			= 16,
 	.default_dmacon			= ATMEL_LCDC_DMAEN,
 	.default_lcdcon2		= AT91SAM9RL_DEFAULT_LCDCON2,
 	.default_monspecs		= &at91fb_default_monspecs,
 	.atmel_lcdfb_power_control	= at91_lcdc_power_control,
 	.guard_time			= 1,
+	.lcd_wiring_mode		= ATMEL_LCDC_WIRING_RGB,
 };
 
 #else

arch/arm/mach-at91/include/mach/at_hdmac.h

@@ -0,0 +1,102 @@
+/*
+ * Header file for the Atmel AHB DMA Controller driver
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef AT_HDMAC_H
+#define AT_HDMAC_H
+
+#include <linux/dmaengine.h>
+
+/**
+ * struct at_dma_platform_data - Controller configuration parameters
+ * @nr_channels: Number of channels supported by hardware (max 8)
+ * @cap_mask: dma_capability flags supported by the platform
+ */
+struct at_dma_platform_data {
+	unsigned int	nr_channels;
+	dma_cap_mask_t  cap_mask;
+};
+
+/**
+ * enum at_dma_slave_width - DMA slave register access width.
+ * @AT_DMA_SLAVE_WIDTH_8BIT: Do 8-bit slave register accesses
+ * @AT_DMA_SLAVE_WIDTH_16BIT: Do 16-bit slave register accesses
+ * @AT_DMA_SLAVE_WIDTH_32BIT: Do 32-bit slave register accesses
+ */
+enum at_dma_slave_width {
+	AT_DMA_SLAVE_WIDTH_8BIT = 0,
+	AT_DMA_SLAVE_WIDTH_16BIT,
+	AT_DMA_SLAVE_WIDTH_32BIT,
+};
+
+/**
+ * struct at_dma_slave - Controller-specific information about a slave
+ * @dma_dev: required DMA master device
+ * @tx_reg: physical address of data register used for
+ *	memory-to-peripheral transfers
+ * @rx_reg: physical address of data register used for
+ *	peripheral-to-memory transfers
+ * @reg_width: peripheral register width
+ * @cfg: Platform-specific initializer for the CFG register
+ * @ctrla: Platform-specific initializer for the CTRLA register
+ */
+struct at_dma_slave {
+	struct device		*dma_dev;
+	dma_addr_t		tx_reg;
+	dma_addr_t		rx_reg;
+	enum at_dma_slave_width	reg_width;
+	u32			cfg;
+	u32			ctrla;
+};
+
+
+/* Platform-configurable bits in CFG */
+#define	ATC_SRC_PER(h)		(0xFU & (h))	/* Channel src rq associated with periph handshaking ifc h */
+#define	ATC_DST_PER(h)		((0xFU & (h)) <<  4)	/* Channel dst rq associated with periph handshaking ifc h */
+#define	ATC_SRC_REP		(0x1 <<  8)	/* Source Replay Mod */
+#define	ATC_SRC_H2SEL		(0x1 <<  9)	/* Source Handshaking Mod */
+#define		ATC_SRC_H2SEL_SW	(0x0 <<  9)
+#define		ATC_SRC_H2SEL_HW	(0x1 <<  9)
+#define	ATC_DST_REP		(0x1 << 12)	/* Destination Replay Mod */
+#define	ATC_DST_H2SEL		(0x1 << 13)	/* Destination Handshaking Mod */
+#define		ATC_DST_H2SEL_SW	(0x0 << 13)
+#define		ATC_DST_H2SEL_HW	(0x1 << 13)
+#define	ATC_SOD			(0x1 << 16)	/* Stop On Done */
+#define	ATC_LOCK_IF		(0x1 << 20)	/* Interface Lock */
+#define	ATC_LOCK_B		(0x1 << 21)	/* AHB Bus Lock */
+#define	ATC_LOCK_IF_L		(0x1 << 22)	/* Master Interface Arbiter Lock */
+#define		ATC_LOCK_IF_L_CHUNK	(0x0 << 22)
+#define		ATC_LOCK_IF_L_BUFFER	(0x1 << 22)
+#define	ATC_AHB_PROT_MASK	(0x7 << 24)	/* AHB Protection */
+#define	ATC_FIFOCFG_MASK	(0x3 << 28)	/* FIFO Request Configuration */
+#define		ATC_FIFOCFG_LARGESTBURST	(0x0 << 28)
+#define		ATC_FIFOCFG_HALFFIFO		(0x1 << 28)
+#define		ATC_FIFOCFG_ENOUGHSPACE		(0x2 << 28)
+
+/* Platform-configurable bits in CTRLA */
+#define	ATC_SCSIZE_MASK		(0x7 << 16)	/* Source Chunk Transfer Size */
+#define		ATC_SCSIZE_1		(0x0 << 16)
+#define		ATC_SCSIZE_4		(0x1 << 16)
+#define		ATC_SCSIZE_8		(0x2 << 16)
+#define		ATC_SCSIZE_16		(0x3 << 16)
+#define		ATC_SCSIZE_32		(0x4 << 16)
+#define		ATC_SCSIZE_64		(0x5 << 16)
+#define		ATC_SCSIZE_128		(0x6 << 16)
+#define		ATC_SCSIZE_256		(0x7 << 16)
+#define	ATC_DCSIZE_MASK		(0x7 << 20)	/* Destination Chunk Transfer Size */
+#define		ATC_DCSIZE_1		(0x0 << 20)
+#define		ATC_DCSIZE_4		(0x1 << 20)
+#define		ATC_DCSIZE_8		(0x2 << 20)
+#define		ATC_DCSIZE_16		(0x3 << 20)
+#define		ATC_DCSIZE_32		(0x4 << 20)
+#define		ATC_DCSIZE_64		(0x5 << 20)
+#define		ATC_DCSIZE_128		(0x6 << 20)
+#define		ATC_DCSIZE_256		(0x7 << 20)
+
+#endif /* AT_HDMAC_H */

arch/arm/mach-davinci/board-dm355-evm.c

@@ -37,7 +37,6 @@
 #include <mach/serial.h>
 #include <mach/nand.h>
 #include <mach/mmc.h>
-#include <mach/common.h>
 
 #define DAVINCI_ASYNC_EMIF_CONTROL_BASE		0x01e10000
 #define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE	0x02000000

arch/arm/mach-davinci/board-dm355-leopard.c

@@ -36,7 +36,6 @@
 #include <mach/serial.h>
 #include <mach/nand.h>
 #include <mach/mmc.h>
-#include <mach/common.h>
 
 #define DAVINCI_ASYNC_EMIF_CONTROL_BASE		0x01e10000
 #define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE	0x02000000

arch/arm/mach-davinci/board-dm644x-evm.c

@@ -45,7 +45,6 @@
 #include <mach/nand.h>
 #include <mach/mmc.h>
 #include <mach/emac.h>
-#include <mach/common.h>
 
 #define DM644X_EVM_PHY_MASK		(0x2)
 #define DM644X_EVM_MDIO_FREQUENCY	(2200000) /* PHY bus frequency */

arch/arm/mach-davinci/board-dm646x-evm.c

@@ -47,7 +47,6 @@
 #include <mach/i2c.h>
 #include <mach/mmc.h>
 #include <mach/emac.h>
-#include <mach/common.h>
 
 #define DM646X_EVM_PHY_MASK		(0x2)
 #define DM646X_EVM_MDIO_FREQUENCY	(2200000) /* PHY bus frequency */

arch/arm/mach-davinci/board-sffsdr.c

@@ -52,7 +52,6 @@
 #include <mach/serial.h>
 #include <mach/psc.h>
 #include <mach/mux.h>
-#include <mach/common.h>
 
 #define SFFSDR_PHY_MASK		(0x2)
 #define SFFSDR_MDIO_FREQUENCY	(2200000) /* PHY bus frequency */

arch/arm/mach-ep93xx/dma-m2p.c

@@ -33,6 +33,7 @@
 #include <linux/err.h>
 #include <linux/interrupt.h>
 #include <linux/module.h>
+#include <linux/io.h>
 
 #include <mach/dma.h>
 #include <mach/hardware.h>

arch/arm/mach-ep93xx/include/mach/ts72xx.h

@@ -41,9 +41,6 @@
 #define TS72XX_OPTIONS2_TS9420_BOOT	0x02
 
 
-#define TS72XX_NOR_PHYS_BASE		0x60000000
-#define TS72XX_NOR2_PHYS_BASE		0x62000000
-
 #define TS72XX_NAND1_DATA_PHYS_BASE	0x60000000
 #define TS72XX_NAND2_DATA_PHYS_BASE	0x70000000
 #define TS72XX_NAND_DATA_VIRT_BASE	0xfebfc000

arch/arm/mach-ep93xx/ts72xx.c

@@ -112,13 +112,16 @@ static void __init ts72xx_map_io(void)
 	}
 }
 
+/*************************************************************************
+ * NOR flash (TS-7200 only)
+ *************************************************************************/
 static struct physmap_flash_data ts72xx_flash_data = {
-	.width		= 1,
+	.width		= 2,
 };
 
 static struct resource ts72xx_flash_resource = {
-	.start		= TS72XX_NOR_PHYS_BASE,
-	.end		= TS72XX_NOR_PHYS_BASE + SZ_16M - 1,
+	.start		= EP93XX_CS6_PHYS_BASE,
+	.end		= EP93XX_CS6_PHYS_BASE + SZ_16M - 1,
 	.flags		= IORESOURCE_MEM,
 };
 
@@ -132,6 +135,12 @@ static struct platform_device ts72xx_flash = {
 	.resource	= &ts72xx_flash_resource,
 };
 
+static void __init ts72xx_register_flash(void)
+{
+	if (board_is_ts7200())
+		platform_device_register(&ts72xx_flash);
+}
+
 static unsigned char ts72xx_rtc_readbyte(unsigned long addr)
 {
 	__raw_writeb(addr, TS72XX_RTC_INDEX_VIRT_BASE);
@@ -165,8 +174,7 @@ static struct ep93xx_eth_data ts72xx_eth_data = {
 static void __init ts72xx_init_machine(void)
 {
 	ep93xx_init_devices();
-	if (board_is_ts7200())
-		platform_device_register(&ts72xx_flash);
+	ts72xx_register_flash();
 	platform_device_register(&ts72xx_rtc_device);
 
 	ep93xx_register_eth(&ts72xx_eth_data, 1);

arch/arm/mach-kirkwood/mpp.h

@@ -289,7 +289,7 @@
 
 #define MPP48_GPIO		MPP( 48, 0x0, 1, 1, 0,   0,   0,   1    )
 #define MPP48_TSMP12		MPP( 48, 0x1, 1, 1, 0,   0,   0,   1    )
-#define MPP48_TDM_DTX		MPP( 48. 0x2, 0, 1, 0,   0,   0,   1    )
+#define MPP48_TDM_DTX		MPP( 48, 0x2, 0, 1, 0,   0,   0,   1    )
 
 #define MPP49_GPIO		MPP( 49, 0x0, 1, 1, 0,   0,   0,   1    )
 #define MPP49_TSMP9		MPP( 49, 0x1, 1, 1, 0,   0,   0,   1    )

arch/arm/mach-ks8695/include/mach/hardware.h

@@ -16,6 +16,11 @@
 
 #include <asm/sizes.h>
 
+/*
+ * Clocks are derived from MCLK, which is 25Mhz
+ */
+#define KS8695_CLOCK_RATE	25000000
+
 /*
  * Physical RAM address.
  */

arch/arm/mach-ks8695/include/mach/timex.h

@@ -14,7 +14,8 @@
 #ifndef __ASM_ARCH_TIMEX_H
 #define __ASM_ARCH_TIMEX_H
 
-/* timers are derived from MCLK, which is 25MHz */
-#define CLOCK_TICK_RATE 25000000
+#include <mach/hardware.h>
+
+#define CLOCK_TICK_RATE 	KS8695_CLOCK_RATE
 
 #endif

arch/arm/mach-ks8695/pci.c

@@ -245,6 +245,9 @@ static int ks8695_pci_fault(unsigned long addr, unsigned int fsr, struct pt_regs
 
 static void __init ks8695_pci_preinit(void)
 {
+	/* make software reset to avoid freeze if PCI bus was messed up */
+	__raw_writel(0x80000000, KS8695_PCI_VA + KS8695_PBCS);
+
 	/* stage 1 initialization, subid, subdevice = 0x0001 */
 	__raw_writel(0x00010001, KS8695_PCI_VA + KS8695_CRCSID);
 

arch/arm/mach-mx3/Kconfig

@@ -36,6 +36,14 @@ config MACH_PCM037
 	  Include support for Phytec pcm037 platform. This includes
 	  specific configurations for the board and its peripherals.
 
+config MACH_PCM037_EET
+	bool "Support pcm037 EET board extensions"
+	depends on MACH_PCM037
+	help
+	  Add support for PCM037 EET baseboard extensions. If you are using the
+	  OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel
+	  command-line parameter.
+
 config MACH_MX31LITE
 	bool "Support MX31 LITEKIT (LogicPD)"
 	select ARCH_MX31

arch/arm/mach-mx3/Makefile

@@ -11,6 +11,7 @@ obj-$(CONFIG_MACH_MX31ADS)	+= mx31ads.o
 obj-$(CONFIG_MACH_MX31LILLY)	+= mx31lilly.o mx31lilly-db.o
 obj-$(CONFIG_MACH_MX31LITE)	+= mx31lite.o
 obj-$(CONFIG_MACH_PCM037)	+= pcm037.o
+obj-$(CONFIG_MACH_PCM037_EET)	+= pcm037_eet.o
 obj-$(CONFIG_MACH_MX31_3DS)	+= mx31pdk.o
 obj-$(CONFIG_MACH_MX31MOBOARD)	+= mx31moboard.o mx31moboard-devboard.o \
 				   mx31moboard-marxbot.o

arch/arm/mach-mx3/armadillo5x0.c

@@ -31,6 +31,8 @@
 #include <linux/smsc911x.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -46,8 +48,10 @@
 #include <mach/mmc.h>
 #include <mach/ipu.h>
 #include <mach/mx3fb.h>
+#include <mach/mxc_nand.h>
 
 #include "devices.h"
+#include "crm_regs.h"
 
 static int armadillo5x0_pins[] = {
 	/* UART1 */
@@ -93,7 +97,56 @@ static int armadillo5x0_pins[] = {
 	MX31_PIN_FPSHIFT__FPSHIFT,
 	MX31_PIN_DRDY0__DRDY0,
 	IOMUX_MODE(MX31_PIN_LCS1, IOMUX_CONFIG_GPIO), /*ADV7125_PSAVE*/
+};
 
+/*
+ * NAND Flash
+ */
+static struct mxc_nand_platform_data armadillo5x0_nand_flash_pdata = {
+	.width		= 1,
+	.hw_ecc		= 1,
+};
+
+/*
+ * MTD NOR Flash
+ */
+static struct mtd_partition armadillo5x0_nor_flash_partitions[] = {
+	{
+		.name		= "nor.bootloader",
+		.offset		= 0x00000000,
+		.size		= 4*32*1024,
+	}, {
+		.name		= "nor.kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 16*128*1024,
+	}, {
+		.name		= "nor.userland",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 110*128*1024,
+	}, {
+		.name		= "nor.config",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 1*128*1024,
+	},
+};
+
+static struct physmap_flash_data armadillo5x0_nor_flash_pdata = {
+	.width		= 2,
+	.parts		= armadillo5x0_nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(armadillo5x0_nor_flash_partitions),
+};
+
+static struct resource armadillo5x0_nor_flash_resource = {
+	.flags		= IORESOURCE_MEM,
+	.start		= CS0_BASE_ADDR,
+	.end		= CS0_BASE_ADDR + SZ_64M - 1,
+};
+
+static struct platform_device armadillo5x0_nor_flash = {
+	.name			= "physmap-flash",
+	.id			= -1,
+	.num_resources		= 1,
+	.resource		= &armadillo5x0_nor_flash_resource,
 };
 
 /*
@@ -272,6 +325,16 @@ static void __init armadillo5x0_init(void)
 	/* Register FB */
 	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
 	mxc_register_device(&mx3_fb, &mx3fb_pdata);
+
+	/* Register NOR Flash */
+	mxc_register_device(&armadillo5x0_nor_flash,
+			    &armadillo5x0_nor_flash_pdata);
+
+	/* Register NAND Flash */
+	mxc_register_device(&mxc_nand_device, &armadillo5x0_nand_flash_pdata);
+
+	/* set NAND page size to 2k if not configured via boot mode pins */
+	__raw_writel(__raw_readl(MXC_CCM_RCSR) | (1 << 30), MXC_CCM_RCSR);
 }
 
 static void __init armadillo5x0_timer_init(void)

arch/arm/mach-mx3/devices.c

@@ -22,7 +22,6 @@
 #include <linux/platform_device.h>
 #include <linux/serial.h>
 #include <linux/gpio.h>
-#include <linux/dma-mapping.h>
 #include <mach/hardware.h>
 #include <mach/irqs.h>
 #include <mach/common.h>

arch/arm/mach-mx3/pcm037.c

@@ -18,7 +18,7 @@
 
 #include <linux/types.h>
 #include <linux/init.h>
-
+#include <linux/dma-mapping.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/plat-ram.h>
@@ -33,29 +33,67 @@
 #include <linux/irq.h>
 #include <linux/fsl_devices.h>
 
-#include <mach/hardware.h>
+#include <media/soc_camera.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
+#include <mach/board-pcm037.h>
 #include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/i2c.h>
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
 #include <mach/ipu.h>
-#include <mach/board-pcm037.h>
+#include <mach/mmc.h>
+#include <mach/mx3_camera.h>
 #include <mach/mx3fb.h>
 #include <mach/mxc_nand.h>
-#include <mach/mmc.h>
-#ifdef CONFIG_I2C_IMX
-#include <mach/i2c.h>
-#endif
 
 #include "devices.h"
+#include "pcm037.h"
+
+static enum pcm037_board_variant pcm037_instance = PCM037_PCM970;
+
+static int __init pcm037_variant_setup(char *str)
+{
+	if (!strcmp("eet", str))
+		pcm037_instance = PCM037_EET;
+	else if (strcmp("pcm970", str))
+		pr_warning("Unknown pcm037 baseboard variant %s\n", str);
+
+	return 1;
+}
+
+/* Supported values: "pcm970" (default) and "eet" */
+__setup("pcm037_variant=", pcm037_variant_setup);
+
+enum pcm037_board_variant pcm037_variant(void)
+{
+	return pcm037_instance;
+}
+
+/* UART1 with RTS/CTS handshake signals */
+static unsigned int pcm037_uart1_handshake_pins[] = {
+	MX31_PIN_CTS1__CTS1,
+	MX31_PIN_RTS1__RTS1,
+	MX31_PIN_TXD1__TXD1,
+	MX31_PIN_RXD1__RXD1,
+};
+
+/* UART1 without RTS/CTS handshake signals */
+static unsigned int pcm037_uart1_pins[] = {
+	MX31_PIN_TXD1__TXD1,
+	MX31_PIN_RXD1__RXD1,
+};
 
 static unsigned int pcm037_pins[] = {
 	/* I2C */
 	MX31_PIN_CSPI2_MOSI__SCL,
 	MX31_PIN_CSPI2_MISO__SDA,
+	MX31_PIN_CSPI2_SS2__I2C3_SDA,
+	MX31_PIN_CSPI2_SCLK__I2C3_SCL,
 	/* SDHC1 */
 	MX31_PIN_SD1_DATA3__SD1_DATA3,
 	MX31_PIN_SD1_DATA2__SD1_DATA2,
@@ -73,11 +111,6 @@ static unsigned int pcm037_pins[] = {
 	MX31_PIN_CSPI1_SS0__SS0,
 	MX31_PIN_CSPI1_SS1__SS1,
 	MX31_PIN_CSPI1_SS2__SS2,
-	/* UART1 */
-	MX31_PIN_CTS1__CTS1,
-	MX31_PIN_RTS1__RTS1,
-	MX31_PIN_TXD1__TXD1,
-	MX31_PIN_RXD1__RXD1,
 	/* UART2 */
 	MX31_PIN_TXD2__TXD2,
 	MX31_PIN_RXD2__RXD2,
@@ -120,6 +153,22 @@ static unsigned int pcm037_pins[] = {
 	MX31_PIN_D3_SPL__D3_SPL,
 	MX31_PIN_D3_CLS__D3_CLS,
 	MX31_PIN_LCS0__GPI03_23,
+	/* CSI */
+	IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_GPIO),
+	MX31_PIN_CSI_D6__CSI_D6,
+	MX31_PIN_CSI_D7__CSI_D7,
+	MX31_PIN_CSI_D8__CSI_D8,
+	MX31_PIN_CSI_D9__CSI_D9,
+	MX31_PIN_CSI_D10__CSI_D10,
+	MX31_PIN_CSI_D11__CSI_D11,
+	MX31_PIN_CSI_D12__CSI_D12,
+	MX31_PIN_CSI_D13__CSI_D13,
+	MX31_PIN_CSI_D14__CSI_D14,
+	MX31_PIN_CSI_D15__CSI_D15,
+	MX31_PIN_CSI_HSYNC__CSI_HSYNC,
+	MX31_PIN_CSI_MCLK__CSI_MCLK,
+	MX31_PIN_CSI_PIXCLK__CSI_PIXCLK,
+	MX31_PIN_CSI_VSYNC__CSI_VSYNC,
 };
 
 static struct physmap_flash_data pcm037_flash_data = {
@@ -250,19 +299,43 @@ static struct mxc_nand_platform_data pcm037_nand_board_info = {
 	.hw_ecc = 1,
 };
 
-#ifdef CONFIG_I2C_IMX
 static struct imxi2c_platform_data pcm037_i2c_1_data = {
 	.bitrate = 100000,
 };
 
+static struct imxi2c_platform_data pcm037_i2c_2_data = {
+	.bitrate = 20000,
+};
+
 static struct at24_platform_data board_eeprom = {
 	.byte_len = 4096,
 	.page_size = 32,
 	.flags = AT24_FLAG_ADDR16,
 };
 
+static int pcm037_camera_power(struct device *dev, int on)
+{
+	/* disable or enable the camera in X7 or X8 PCM970 connector */
+	gpio_set_value(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), !on);
+	return 0;
+}
+
+static struct i2c_board_info pcm037_i2c_2_devices[] = {
+	{
+		I2C_BOARD_INFO("mt9t031", 0x5d),
+	},
+};
+
+static struct soc_camera_link iclink = {
+	.bus_id		= 0,		/* Must match with the camera ID */
+	.power		= pcm037_camera_power,
+	.board_info	= &pcm037_i2c_2_devices[0],
+	.i2c_adapter_id	= 2,
+	.module_name	= "mt9t031",
+};
+
 static struct i2c_board_info pcm037_i2c_devices[] = {
-       {
+	{
 		I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
 		.platform_data = &board_eeprom,
 	}, {
@@ -270,7 +343,14 @@ static struct i2c_board_info pcm037_i2c_devices[] = {
 		.type = "pcf8563",
 	}
 };
-#endif
+
+static struct platform_device pcm037_camera = {
+	.name	= "soc-camera-pdrv",
+	.id	= 0,
+	.dev	= {
+		.platform_data = &iclink,
+	},
+};
 
 /* Not connected by default */
 #ifdef PCM970_SDHC_RW_SWITCH
@@ -334,9 +414,41 @@ static struct imxmmc_platform_data sdhc_pdata = {
 	.exit = pcm970_sdhc1_exit,
 };
 
+struct mx3_camera_pdata camera_pdata = {
+	.dma_dev	= &mx3_ipu.dev,
+	.flags		= MX3_CAMERA_DATAWIDTH_8 | MX3_CAMERA_DATAWIDTH_10,
+	.mclk_10khz	= 2000,
+};
+
+static int __init pcm037_camera_alloc_dma(const size_t buf_size)
+{
+	dma_addr_t dma_handle;
+	void *buf;
+	int dma;
+
+	if (buf_size < 2 * 1024 * 1024)
+		return -EINVAL;
+
+	buf = dma_alloc_coherent(NULL, buf_size, &dma_handle, GFP_KERNEL);
+	if (!buf) {
+		pr_err("%s: cannot allocate camera buffer-memory\n", __func__);
+		return -ENOMEM;
+	}
+
+	memset(buf, 0, buf_size);
+
+	dma = dma_declare_coherent_memory(&mx3_camera.dev,
+					dma_handle, dma_handle, buf_size,
+					DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE);
+
+	/* The way we call dma_declare_coherent_memory only a malloc can fail */
+	return dma & DMA_MEMORY_MAP ? 0 : -ENOMEM;
+}
+
 static struct platform_device *devices[] __initdata = {
 	&pcm037_flash,
 	&pcm037_sram_device,
+	&pcm037_camera,
 };
 
 static struct ipu_platform_data mx3_ipu_data = {
@@ -377,6 +489,22 @@ static const struct fb_videomode fb_modedb[] = {
 		.sync		= FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
 		.vmode		= FB_VMODE_NONINTERLACED,
 		.flag		= 0,
+	}, {
+		/* 240x320 @ 60 Hz */
+		.name		= "CMEL-OLED",
+		.refresh	= 60,
+		.xres		= 240,
+		.yres		= 320,
+		.pixclock	= 185925,
+		.left_margin	= 9,
+		.right_margin	= 16,
+		.upper_margin	= 7,
+		.lower_margin	= 9,
+		.hsync_len	= 1,
+		.vsync_len	= 1,
+		.sync		= FB_SYNC_OE_ACT_HIGH | FB_SYNC_CLK_INVERT,
+		.vmode		= FB_VMODE_NONINTERLACED,
+		.flag		= 0,
 	},
 };
 
@@ -397,6 +525,14 @@ static void __init mxc_board_init(void)
 	mxc_iomux_setup_multiple_pins(pcm037_pins, ARRAY_SIZE(pcm037_pins),
 			"pcm037");
 
+	if (pcm037_variant() == PCM037_EET)
+		mxc_iomux_setup_multiple_pins(pcm037_uart1_pins,
+			ARRAY_SIZE(pcm037_uart1_pins), "pcm037_uart1");
+	else
+		mxc_iomux_setup_multiple_pins(pcm037_uart1_handshake_pins,
+			ARRAY_SIZE(pcm037_uart1_handshake_pins),
+			"pcm037_uart1");
+
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
 	mxc_register_device(&mxc_uart_device0, &uart_pdata);
@@ -415,18 +551,30 @@ static void __init mxc_board_init(void)
 	}
 
 
-#ifdef CONFIG_I2C_IMX
+	/* I2C adapters and devices */
 	i2c_register_board_info(1, pcm037_i2c_devices,
 			ARRAY_SIZE(pcm037_i2c_devices));
 
 	mxc_register_device(&mxc_i2c_device1, &pcm037_i2c_1_data);
-#endif
+	mxc_register_device(&mxc_i2c_device2, &pcm037_i2c_2_data);
+
 	mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info);
 	mxc_register_device(&mxcsdhc_device0, &sdhc_pdata);
 	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
 	mxc_register_device(&mx3_fb, &mx3fb_pdata);
 	if (!gpio_usbotg_hs_activate())
 		mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
+
+	/* CSI */
+	/* Camera power: default - off */
+	ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), "mt9t031-power");
+	if (!ret)
+		gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), 1);
+	else
+		iclink.power = NULL;
+
+	if (!pcm037_camera_alloc_dma(4 * 1024 * 1024))
+		mxc_register_device(&mx3_camera, &camera_pdata);
 }
 
 static void __init pcm037_timer_init(void)
@@ -448,4 +596,3 @@ MACHINE_START(PCM037, "Phytec Phycore pcm037")
 	.init_machine   = mxc_board_init,
 	.timer          = &pcm037_timer,
 MACHINE_END
-

arch/arm/mach-mx3/pcm037.h

@@ -0,0 +1,11 @@
+#ifndef __PCM037_H__
+#define __PCM037_H__
+
+enum pcm037_board_variant {
+	PCM037_PCM970,
+	PCM037_EET,
+};
+
+extern enum pcm037_board_variant pcm037_variant(void);
+
+#endif

arch/arm/mach-mx3/pcm037_eet.c

@@ -0,0 +1,204 @@
+/*
+ * Copyright (C) 2009
+ * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+
+#include <mach/common.h>
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+#include <mach/spi.h>
+#endif
+#include <mach/iomux-mx3.h>
+
+#include <asm/mach-types.h>
+
+#include "pcm037.h"
+#include "devices.h"
+
+static unsigned int pcm037_eet_pins[] = {
+	/* SPI #1 */
+	MX31_PIN_CSPI1_MISO__MISO,
+	MX31_PIN_CSPI1_MOSI__MOSI,
+	MX31_PIN_CSPI1_SCLK__SCLK,
+	MX31_PIN_CSPI1_SPI_RDY__SPI_RDY,
+	MX31_PIN_CSPI1_SS0__SS0,
+	MX31_PIN_CSPI1_SS1__SS1,
+	MX31_PIN_CSPI1_SS2__SS2,
+
+	/* Reserve and hardwire GPIO 57 high - S6E63D6 chipselect */
+	IOMUX_MODE(MX31_PIN_KEY_COL7, IOMUX_CONFIG_GPIO),
+	/* GPIO keys */
+	IOMUX_MODE(MX31_PIN_GPIO1_0,	IOMUX_CONFIG_GPIO), /* 0 */
+	IOMUX_MODE(MX31_PIN_GPIO1_1,	IOMUX_CONFIG_GPIO), /* 1 */
+	IOMUX_MODE(MX31_PIN_GPIO1_2,	IOMUX_CONFIG_GPIO), /* 2 */
+	IOMUX_MODE(MX31_PIN_GPIO1_3,	IOMUX_CONFIG_GPIO), /* 3 */
+	IOMUX_MODE(MX31_PIN_SVEN0,	IOMUX_CONFIG_GPIO), /* 32 */
+	IOMUX_MODE(MX31_PIN_STX0,	IOMUX_CONFIG_GPIO), /* 33 */
+	IOMUX_MODE(MX31_PIN_SRX0,	IOMUX_CONFIG_GPIO), /* 34 */
+	IOMUX_MODE(MX31_PIN_SIMPD0,	IOMUX_CONFIG_GPIO), /* 35 */
+	IOMUX_MODE(MX31_PIN_RTS1,	IOMUX_CONFIG_GPIO), /* 38 */
+	IOMUX_MODE(MX31_PIN_CTS1,	IOMUX_CONFIG_GPIO), /* 39 */
+	IOMUX_MODE(MX31_PIN_KEY_ROW4,	IOMUX_CONFIG_GPIO), /* 50 */
+	IOMUX_MODE(MX31_PIN_KEY_ROW5,	IOMUX_CONFIG_GPIO), /* 51 */
+	IOMUX_MODE(MX31_PIN_KEY_ROW6,	IOMUX_CONFIG_GPIO), /* 52 */
+	IOMUX_MODE(MX31_PIN_KEY_ROW7,	IOMUX_CONFIG_GPIO), /* 53 */
+
+	/* LEDs */
+	IOMUX_MODE(MX31_PIN_DTR_DTE1,	IOMUX_CONFIG_GPIO), /* 44 */
+	IOMUX_MODE(MX31_PIN_DSR_DTE1,	IOMUX_CONFIG_GPIO), /* 45 */
+	IOMUX_MODE(MX31_PIN_KEY_COL5,	IOMUX_CONFIG_GPIO), /* 55 */
+	IOMUX_MODE(MX31_PIN_KEY_COL6,	IOMUX_CONFIG_GPIO), /* 56 */
+};
+
+/* SPI */
+static struct spi_board_info pcm037_spi_dev[] = {
+	{
+		.modalias	= "dac124s085",
+		.max_speed_hz	= 400000,
+		.bus_num	= 0,
+		.chip_select	= 0,		/* Index in pcm037_spi1_cs[] */
+		.mode		= SPI_CPHA,
+	},
+};
+
+/* Platform Data for MXC CSPI */
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+static int pcm037_spi1_cs[] = {MXC_SPI_CS(1), IOMUX_TO_GPIO(MX31_PIN_KEY_COL7)};
+
+struct spi_imx_master pcm037_spi1_master = {
+	.chipselect = pcm037_spi1_cs,
+	.num_chipselect = ARRAY_SIZE(pcm037_spi1_cs),
+};
+#endif
+
+/* GPIO-keys input device */
+static struct gpio_keys_button pcm037_gpio_keys[] = {
+	{
+		.type	= EV_KEY,
+		.code	= KEY_L,
+		.gpio	= 0,
+		.desc	= "Wheel Manual",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= KEY_A,
+		.gpio	= 1,
+		.desc	= "Wheel AF",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= KEY_V,
+		.gpio	= 2,
+		.desc	= "Wheel View",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= KEY_M,
+		.gpio	= 3,
+		.desc	= "Wheel Menu",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= KEY_UP,
+		.gpio	= 32,
+		.desc	= "Nav Pad Up",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= KEY_RIGHT,
+		.gpio	= 33,
+		.desc	= "Nav Pad Right",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= KEY_DOWN,
+		.gpio	= 34,
+		.desc	= "Nav Pad Down",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= KEY_LEFT,
+		.gpio	= 35,
+		.desc	= "Nav Pad Left",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= KEY_ENTER,
+		.gpio	= 38,
+		.desc	= "Nav Pad Ok",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= KEY_O,
+		.gpio	= 39,
+		.desc	= "Wheel Off",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= BTN_FORWARD,
+		.gpio	= 50,
+		.desc	= "Focus Forward",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= BTN_BACK,
+		.gpio	= 51,
+		.desc	= "Focus Backward",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= BTN_MIDDLE,
+		.gpio	= 52,
+		.desc	= "Release Half",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= BTN_EXTRA,
+		.gpio	= 53,
+		.desc	= "Release Full",
+		.wakeup	= 0,
+	},
+};
+
+static struct gpio_keys_platform_data pcm037_gpio_keys_platform_data = {
+	.buttons	= pcm037_gpio_keys,
+	.nbuttons	= ARRAY_SIZE(pcm037_gpio_keys),
+	.rep		= 0, /* No auto-repeat */
+};
+
+static struct platform_device pcm037_gpio_keys_device = {
+	.name	= "gpio-keys",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &pcm037_gpio_keys_platform_data,
+	},
+};
+
+static int eet_init_devices(void)
+{
+	if (!machine_is_pcm037() || pcm037_variant() != PCM037_EET)
+		return 0;
+
+	mxc_iomux_setup_multiple_pins(pcm037_eet_pins,
+				ARRAY_SIZE(pcm037_eet_pins), "pcm037_eet");
+
+	/* SPI */
+	spi_register_board_info(pcm037_spi_dev, ARRAY_SIZE(pcm037_spi_dev));
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+	mxc_register_device(&mxc_spi_device0, &pcm037_spi1_master);
+#endif
+
+	platform_device_register(&pcm037_gpio_keys_device);
+
+	return 0;
+}
+
+late_initcall(eet_init_devices);

arch/arm/mach-omap1/board-nokia770.c

@@ -36,7 +36,6 @@
 #include <mach/hwa742.h>
 #include <mach/lcd_mipid.h>
 #include <mach/mmc.h>
-#include <mach/usb.h>
 #include <mach/clock.h>
 
 #define ADS7846_PENDOWN_GPIO	15
@@ -205,9 +204,11 @@ static int nokia770_mmc_get_cover_state(struct device *dev, int slot)
 static struct omap_mmc_platform_data nokia770_mmc2_data = {
 	.nr_slots                       = 1,
 	.dma_mask			= 0xffffffff,
+	.max_freq                       = 12000000,
 	.slots[0]       = {
 		.set_power		= nokia770_mmc_set_power,
 		.get_cover_state	= nokia770_mmc_get_cover_state,
+		.ocr_mask               = MMC_VDD_32_33|MMC_VDD_33_34,
 		.name                   = "mmcblk",
 	},
 };

arch/arm/mach-omap1/mailbox.c

@@ -203,5 +203,5 @@ module_exit(omap1_mbox_exit);
 
 MODULE_LICENSE("GPL v2");
 MODULE_DESCRIPTION("omap mailbox: omap1 architecture specific functions");
-MODULE_AUTHOR("Hiroshi DOYU" <Hiroshi.DOYU@nokia.com>);
+MODULE_AUTHOR("Hiroshi DOYU <Hiroshi.DOYU@nokia.com>");
 MODULE_ALIAS("platform:omap1-mailbox");

arch/arm/mach-omap1/mcbsp.c

@@ -19,7 +19,6 @@
 
 #include <mach/irqs.h>
 #include <mach/dma.h>
-#include <mach/irqs.h>
 #include <mach/mux.h>
 #include <mach/cpu.h>
 #include <mach/mcbsp.h>

arch/arm/mach-omap2/board-omap3evm.c

@@ -25,6 +25,7 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 #include <linux/i2c/twl4030.h>
+#include <linux/usb/otg.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -307,6 +308,10 @@ static void __init omap3_evm_init(void)
 				ARRAY_SIZE(omap3evm_spi_board_info));
 
 	omap_serial_init();
+#ifdef CONFIG_NOP_USB_XCEIV
+	/* OMAP3EVM uses ISP1504 phy and so register nop transceiver */
+	usb_nop_xceiv_register();
+#endif
 	usb_musb_init();
 	ads7846_dev_init();
 }

arch/arm/mach-omap2/board-rx51-peripherals.c

@@ -362,6 +362,7 @@ static struct omap_onenand_platform_data board_onenand_data = {
 	.gpio_irq	= 65,
 	.parts		= onenand_partitions,
 	.nr_parts	= ARRAY_SIZE(onenand_partitions),
+	.flags		= ONENAND_SYNC_READWRITE,
 };
 
 static void __init board_onenand_init(void)

arch/arm/mach-omap2/gpmc-onenand.c

@@ -31,6 +31,8 @@ static struct platform_device gpmc_onenand_device = {
 static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base)
 {
 	struct gpmc_timings t;
+	u32 reg;
+	int err;
 
 	const int t_cer = 15;
 	const int t_avdp = 12;
@@ -43,6 +45,11 @@ static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base)
 	const int t_wpl = 40;
 	const int t_wph = 30;
 
+	/* Ensure sync read and sync write are disabled */
+	reg = readw(onenand_base + ONENAND_REG_SYS_CFG1);
+	reg &= ~ONENAND_SYS_CFG1_SYNC_READ & ~ONENAND_SYS_CFG1_SYNC_WRITE;
+	writew(reg, onenand_base + ONENAND_REG_SYS_CFG1);
+
 	memset(&t, 0, sizeof(t));
 	t.sync_clk = 0;
 	t.cs_on = 0;
@@ -74,7 +81,16 @@ static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base)
 			  GPMC_CONFIG1_DEVICESIZE_16 |
 			  GPMC_CONFIG1_MUXADDDATA);
 
-	return gpmc_cs_set_timings(cs, &t);
+	err = gpmc_cs_set_timings(cs, &t);
+	if (err)
+		return err;
+
+	/* Ensure sync read and sync write are disabled */
+	reg = readw(onenand_base + ONENAND_REG_SYS_CFG1);
+	reg &= ~ONENAND_SYS_CFG1_SYNC_READ & ~ONENAND_SYS_CFG1_SYNC_WRITE;
+	writew(reg, onenand_base + ONENAND_REG_SYS_CFG1);
+
+	return 0;
 }
 
 static void set_onenand_cfg(void __iomem *onenand_base, int latency,
@@ -124,7 +140,8 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg,
 	} else if (cfg->flags & ONENAND_SYNC_READWRITE) {
 		sync_read = 1;
 		sync_write = 1;
-	}
+	} else
+		return omap2_onenand_set_async_mode(cs, onenand_base);
 
 	if (!freq) {
 		/* Very first call freq is not known */

arch/arm/mach-omap2/id.c

@@ -48,6 +48,28 @@ int omap_chip_is(struct omap_chip_id oci)
 }
 EXPORT_SYMBOL(omap_chip_is);
 
+int omap_type(void)
+{
+	u32 val = 0;
+
+	if (cpu_is_omap24xx())
+		val = omap_ctrl_readl(OMAP24XX_CONTROL_STATUS);
+	else if (cpu_is_omap34xx())
+		val = omap_ctrl_readl(OMAP343X_CONTROL_STATUS);
+	else {
+		pr_err("Cannot detect omap type!\n");
+		goto out;
+	}
+
+	val &= OMAP2_DEVICETYPE_MASK;
+	val >>= 8;
+
+out:
+	return val;
+}
+EXPORT_SYMBOL(omap_type);
+
+
 /*----------------------------------------------------------------------------*/
 
 #define OMAP_TAP_IDCODE		0x0204

arch/arm/mach-omap2/mailbox.c

@@ -282,12 +282,12 @@ static int __devinit omap2_mbox_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	/* DSP or IVA2 IRQ */
-	mbox_dsp_info.irq = platform_get_irq(pdev, 0);
-	if (mbox_dsp_info.irq < 0) {
+	ret = platform_get_irq(pdev, 0);
+	if (ret < 0) {
 		dev_err(&pdev->dev, "invalid irq resource\n");
-		ret = -ENODEV;
 		goto err_dsp;
 	}
+	mbox_dsp_info.irq = ret;
 
 	ret = omap_mbox_register(&pdev->dev, &mbox_dsp_info);
 	if (ret)