drm/i915: Disable SF pipelined attribute fetch for SNB

According to Bspec we need to disable SF pipelined attribute fetch
whenever SF outputs exceed 16 and normal clip mode is used. A quick
glance at Mesa suggests that these conditions could happen. So let's
just always set the magic bit.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drivers/gpu/drm/i915/i915_reg.h

@@ -789,7 +789,8 @@
 #define _3D_CHICKEN3	0x02090
 #define  _3D_CHICKEN_SF_DISABLE_OBJEND_CULL		(1 << 10)
 #define  _3D_CHICKEN3_SF_DISABLE_FASTCLIP_CULL		(1 << 5)
-#define  _3D_CHICKEN_SDE_LIMIT_FIFO_POLY_DEPTH(x)	((x)<<1)
+#define  _3D_CHICKEN_SDE_LIMIT_FIFO_POLY_DEPTH(x)	((x)<<1) /* gen8+ */
+#define  _3D_CHICKEN3_SF_DISABLE_PIPELINED_ATTR_FETCH	(1 << 1) /* gen6 */
 
 #define MI_MODE		0x0209c
 # define VS_TIMER_DISPATCH				(1 << 6)

drivers/gpu/drm/i915/intel_pm.c

@@ -4697,6 +4697,14 @@ static void gen6_init_clock_gating(struct drm_device *dev)
 	I915_WRITE(_3D_CHICKEN3, (0xFFFF << 16) |
 		   _3D_CHICKEN3_SF_DISABLE_FASTCLIP_CULL);
 
+	/*
+	 * Bspec says:
+	 * "This bit must be set if 3DSTATE_CLIP clip mode is set to normal and
+	 * 3DSTATE_SF number of SF output attributes is more than 16."
+	 */
+	I915_WRITE(_3D_CHICKEN3,
+		   _MASKED_BIT_ENABLE(_3D_CHICKEN3_SF_DISABLE_PIPELINED_ATTR_FETCH));
+
 	/*
 	 * According to the spec the following bits should be
 	 * set in order to enable memory self-refresh and fbc: