mtd: spi-nor: fix selection of uniform erase type in flexible conf

There are uniform, non-uniform and flexible erase flash configurations.

The non-uniform erase types, are the erase types that can _not_ erase
the entire flash by their own.

As the code was, in case flashes had flexible erase capabilities
(support both uniform and non-uniform erase types in the same flash
configuration) and supported multiple uniform erase type sizes, the
code did not sort the uniform erase types, and could select a wrong
erase type size.

Sort the uniform erase mask in case of flexible erase flash
configurations, in order to select the best uniform erase type size.

Uniform, non-uniform, and flexible configurations with just a valid
uniform erase type, are not affected by this change.

Uniform erase tested on mx25l3273fm2i-08g and sst26vf064B-104i/sn.
Non uniform erase tested on sst26vf064B-104i/sn.

Fixes: 5390a8df769e ("mtd: spi-nor: add support to non-uniform SFDP SPI NOR flash memories")
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>

drivers/mtd/spi-nor/spi-nor.c

@@ -2521,6 +2521,34 @@ static int spi_nor_map_cmp_erase_type(const void *l, const void *r)
 	return left->size - right->size;
 }
 
+/**
+ * spi_nor_sort_erase_mask() - sort erase mask
+ * @map:	the erase map of the SPI NOR
+ * @erase_mask:	the erase type mask to be sorted
+ *
+ * Replicate the sort done for the map's erase types in BFPT: sort the erase
+ * mask in ascending order with the smallest erase type size starting from
+ * BIT(0) in the sorted erase mask.
+ *
+ * Return: sorted erase mask.
+ */
+static u8 spi_nor_sort_erase_mask(struct spi_nor_erase_map *map, u8 erase_mask)
+{
+	struct spi_nor_erase_type *erase_type = map->erase_type;
+	int i;
+	u8 sorted_erase_mask = 0;
+
+	if (!erase_mask)
+		return 0;
+
+	/* Replicate the sort done for the map's erase types. */
+	for (i = 0; i < SNOR_ERASE_TYPE_MAX; i++)
+		if (erase_type[i].size && erase_mask & BIT(erase_type[i].idx))
+			sorted_erase_mask |= BIT(i);
+
+	return sorted_erase_mask;
+}
+
 /**
  * spi_nor_regions_sort_erase_types() - sort erase types in each region
  * @map:	the erase map of the SPI NOR
@@ -2536,19 +2564,13 @@ static int spi_nor_map_cmp_erase_type(const void *l, const void *r)
 static void spi_nor_regions_sort_erase_types(struct spi_nor_erase_map *map)
 {
 	struct spi_nor_erase_region *region = map->regions;
-	struct spi_nor_erase_type *erase_type = map->erase_type;
-	int i;
 	u8 region_erase_mask, sorted_erase_mask;
 
 	while (region) {
 		region_erase_mask = region->offset & SNOR_ERASE_TYPE_MASK;
 
-		/* Replicate the sort done for the map's erase types. */
-		sorted_erase_mask = 0;
-		for (i = 0; i < SNOR_ERASE_TYPE_MAX; i++)
-			if (erase_type[i].size &&
-			    region_erase_mask & BIT(erase_type[i].idx))
-				sorted_erase_mask |= BIT(i);
+		sorted_erase_mask = spi_nor_sort_erase_mask(map,
+							    region_erase_mask);
 
 		/* Overwrite erase mask. */
 		region->offset = (region->offset & ~SNOR_ERASE_TYPE_MASK) |
@@ -2978,7 +3000,7 @@ static int spi_nor_init_non_uniform_erase_map(struct spi_nor *nor,
 	u64 offset;
 	u32 region_count;
 	int i, j;
-	u8 erase_type;
+	u8 erase_type, uniform_erase_type;
 
 	region_count = SMPT_MAP_REGION_COUNT(*smpt);
 	/*
@@ -2991,7 +3013,7 @@ static int spi_nor_init_non_uniform_erase_map(struct spi_nor *nor,
 		return -ENOMEM;
 	map->regions = region;
 
-	map->uniform_erase_type = 0xff;
+	uniform_erase_type = 0xff;
 	offset = 0;
 	/* Populate regions. */
 	for (i = 0; i < region_count; i++) {
@@ -3006,12 +3028,15 @@ static int spi_nor_init_non_uniform_erase_map(struct spi_nor *nor,
 		 * Save the erase types that are supported in all regions and
 		 * can erase the entire flash memory.
 		 */
-		map->uniform_erase_type &= erase_type;
+		uniform_erase_type &= erase_type;
 
 		offset = (region[i].offset & ~SNOR_ERASE_FLAGS_MASK) +
 			 region[i].size;
 	}
 
+	map->uniform_erase_type = spi_nor_sort_erase_mask(map,
+							  uniform_erase_type);
+
 	spi_nor_region_mark_end(&region[i - 1]);
 
 	return 0;