Selaa lähdekoodia

iommu/amd: Add support for higher 64-bit IOMMU Control Register

Currently, the driver only supports lower 32-bit of IOMMU Control register.
However, newer AMD IOMMU specification has extended this register
to 64-bit. Therefore, replace the accessing API with the 64-bit version.

Cc: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Suravee Suthikulpanit 7 vuotta sitten
vanhempi
commit
e881dbd5d4
1 muutettua tiedostoa jossa 13 lisäystä ja 13 poistoa
  1. 13 13
      drivers/iommu/amd_iommu_init.c

+ 13 - 13
drivers/iommu/amd_iommu_init.c

@@ -280,9 +280,9 @@ static void clear_translation_pre_enabled(struct amd_iommu *iommu)
 
 static void init_translation_status(struct amd_iommu *iommu)
 {
-	u32 ctrl;
+	u64 ctrl;
 
-	ctrl = readl(iommu->mmio_base + MMIO_CONTROL_OFFSET);
+	ctrl = readq(iommu->mmio_base + MMIO_CONTROL_OFFSET);
 	if (ctrl & (1<<CONTROL_IOMMU_EN))
 		iommu->flags |= AMD_IOMMU_FLAG_TRANS_PRE_ENABLED;
 }
@@ -386,30 +386,30 @@ static void iommu_set_device_table(struct amd_iommu *iommu)
 /* Generic functions to enable/disable certain features of the IOMMU. */
 static void iommu_feature_enable(struct amd_iommu *iommu, u8 bit)
 {
-	u32 ctrl;
+	u64 ctrl;
 
-	ctrl = readl(iommu->mmio_base + MMIO_CONTROL_OFFSET);
-	ctrl |= (1 << bit);
-	writel(ctrl, iommu->mmio_base + MMIO_CONTROL_OFFSET);
+	ctrl = readq(iommu->mmio_base +  MMIO_CONTROL_OFFSET);
+	ctrl |= (1ULL << bit);
+	writeq(ctrl, iommu->mmio_base +  MMIO_CONTROL_OFFSET);
 }
 
 static void iommu_feature_disable(struct amd_iommu *iommu, u8 bit)
 {
-	u32 ctrl;
+	u64 ctrl;
 
-	ctrl = readl(iommu->mmio_base + MMIO_CONTROL_OFFSET);
-	ctrl &= ~(1 << bit);
-	writel(ctrl, iommu->mmio_base + MMIO_CONTROL_OFFSET);
+	ctrl = readq(iommu->mmio_base + MMIO_CONTROL_OFFSET);
+	ctrl &= ~(1ULL << bit);
+	writeq(ctrl, iommu->mmio_base + MMIO_CONTROL_OFFSET);
 }
 
 static void iommu_set_inv_tlb_timeout(struct amd_iommu *iommu, int timeout)
 {
-	u32 ctrl;
+	u64 ctrl;
 
-	ctrl = readl(iommu->mmio_base + MMIO_CONTROL_OFFSET);
+	ctrl = readq(iommu->mmio_base + MMIO_CONTROL_OFFSET);
 	ctrl &= ~CTRL_INV_TO_MASK;
 	ctrl |= (timeout << CONTROL_INV_TIMEOUT) & CTRL_INV_TO_MASK;
-	writel(ctrl, iommu->mmio_base + MMIO_CONTROL_OFFSET);
+	writeq(ctrl, iommu->mmio_base + MMIO_CONTROL_OFFSET);
 }
 
 /* Function to enable the hardware */