x86/platform/intel-mid: Enable spidev on Intel Edison boards

Intel Edison board provides one of the SPI bus for user's connected devices.

Append platform data to get spidev enumerated over it.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Dan O'Donovan <dan@emutex.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1467677690-90007-1-git-send-email-andriy.shevchenko@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

arch/x86/platform/intel-mid/device_libs/Makefile

@@ -10,6 +10,8 @@ obj-$(subst m,y,$(CONFIG_MFD_INTEL_MSIC)) += platform_msic_battery.o
 obj-$(subst m,y,$(CONFIG_INTEL_MID_POWER_BUTTON)) += platform_msic_power_btn.o
 obj-$(subst m,y,$(CONFIG_GPIO_INTEL_PMIC)) += platform_pmic_gpio.o
 obj-$(subst m,y,$(CONFIG_INTEL_MFLD_THERMAL)) += platform_msic_thermal.o
+# SPI Devices
+obj-$(subst m,y,$(CONFIG_SPI_SPIDEV)) += platform_spidev.o
 # I2C Devices
 obj-$(subst m,y,$(CONFIG_SENSORS_EMC1403)) += platform_emc1403.o
 obj-$(subst m,y,$(CONFIG_SENSORS_LIS3LV02D)) += platform_lis331.o

arch/x86/platform/intel-mid/device_libs/platform_spidev.c

@@ -0,0 +1,50 @@
+/*
+ * spidev platform data initilization file
+ *
+ * (C) Copyright 2014, 2016 Intel Corporation
+ * Authors: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+ *	    Dan O'Donovan <dan@emutex.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+
+#include <linux/init.h>
+#include <linux/sfi.h>
+#include <linux/spi/pxa2xx_spi.h>
+#include <linux/spi/spi.h>
+
+#include <asm/intel-mid.h>
+
+#define MRFLD_SPI_DEFAULT_DMA_BURST	8
+#define MRFLD_SPI_DEFAULT_TIMEOUT	500
+
+/* GPIO pin for spidev chipselect */
+#define MRFLD_SPIDEV_GPIO_CS		111
+
+static struct pxa2xx_spi_chip spidev_spi_chip = {
+	.dma_burst_size		= MRFLD_SPI_DEFAULT_DMA_BURST,
+	.timeout		= MRFLD_SPI_DEFAULT_TIMEOUT,
+	.gpio_cs		= MRFLD_SPIDEV_GPIO_CS,
+};
+
+static void __init *spidev_platform_data(void *info)
+{
+	struct spi_board_info *spi_info = info;
+
+	spi_info->mode = SPI_MODE_0;
+	spi_info->controller_data = &spidev_spi_chip;
+
+	return NULL;
+}
+
+static const struct devs_id spidev_dev_id __initconst = {
+	.name			= "spidev",
+	.type			= SFI_DEV_TYPE_SPI,
+	.delay			= 0,
+	.get_platform_data	= &spidev_platform_data,
+};
+
+sfi_device(spidev_dev_id);