Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm

Pull ARM fixes from Russell King:
 "Another round of relatively small ARM fixes.

  Thomas spotted that the strex backoff delay bit was a disable bit, so
  it needed to be clear for this to work.  Vladimir spotted that using a
  restart block for the cache flush operation would return -EINTR, which
  userspace was not expecting.  Dmitry spotted that the auxiliary
  control register accesses for Xscale were not correct"

* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  ARM: 8226/1: cacheflush: get rid of restarting block
  ARM: 8222/1: mvebu: enable strex backoff delay
  ARM: 8216/1: xscale: correct auxiliary register in suspend/resume

arch/arm/include/asm/thread_info.h

@@ -44,16 +44,6 @@ struct cpu_context_save {
 	__u32	extra[2];		/* Xscale 'acc' register, etc */
 };
 
-struct arm_restart_block {
-	union {
-		/* For user cache flushing */
-		struct {
-			unsigned long start;
-			unsigned long end;
-		} cache;
-	};
-};
-
 /*
  * low level task data that entry.S needs immediate access to.
  * __switch_to() assumes cpu_context follows immediately after cpu_domain.
@@ -79,7 +69,6 @@ struct thread_info {
 	unsigned long		thumbee_state;	/* ThumbEE Handler Base register */
 #endif
 	struct restart_block	restart_block;
-	struct arm_restart_block	arm_restart_block;
 };
 
 #define INIT_THREAD_INFO(tsk)						\

arch/arm/kernel/traps.c

@@ -533,8 +533,6 @@ static int bad_syscall(int n, struct pt_regs *regs)
 	return regs->ARM_r0;
 }
 
-static long do_cache_op_restart(struct restart_block *);
-
 static inline int
 __do_cache_op(unsigned long start, unsigned long end)
 {
@@ -543,24 +541,8 @@ __do_cache_op(unsigned long start, unsigned long end)
 	do {
 		unsigned long chunk = min(PAGE_SIZE, end - start);
 
-		if (signal_pending(current)) {
-			struct thread_info *ti = current_thread_info();
-
-			ti->restart_block = (struct restart_block) {
-				.fn	= do_cache_op_restart,
-			};
-
-			ti->arm_restart_block = (struct arm_restart_block) {
-				{
-					.cache = {
-						.start	= start,
-						.end	= end,
-					},
-				},
-			};
-
-			return -ERESTART_RESTARTBLOCK;
-		}
+		if (fatal_signal_pending(current))
+			return 0;
 
 		ret = flush_cache_user_range(start, start + chunk);
 		if (ret)
@@ -573,15 +555,6 @@ __do_cache_op(unsigned long start, unsigned long end)
 	return 0;
 }
 
-static long do_cache_op_restart(struct restart_block *unused)
-{
-	struct arm_restart_block *restart_block;
-
-	restart_block = &current_thread_info()->arm_restart_block;
-	return __do_cache_op(restart_block->cache.start,
-			     restart_block->cache.end);
-}
-
 static inline int
 do_cache_op(unsigned long start, unsigned long end, int flags)
 {

arch/arm/mm/proc-v7.S

@@ -270,7 +270,6 @@ __v7_pj4b_setup:
 /* Auxiliary Debug Modes Control 1 Register */
 #define PJ4B_STATIC_BP (1 << 2) /* Enable Static BP */
 #define PJ4B_INTER_PARITY (1 << 8) /* Disable Internal Parity Handling */
-#define PJ4B_BCK_OFF_STREX (1 << 5) /* Enable the back off of STREX instr */
 #define PJ4B_CLEAN_LINE (1 << 16) /* Disable data transfer for clean line */
 
 /* Auxiliary Debug Modes Control 2 Register */
@@ -293,7 +292,6 @@ __v7_pj4b_setup:
 	/* Auxiliary Debug Modes Control 1 Register */
 	mrc	p15, 1,	r0, c15, c1, 1
 	orr     r0, r0, #PJ4B_CLEAN_LINE
-	orr     r0, r0, #PJ4B_BCK_OFF_STREX
 	orr     r0, r0, #PJ4B_INTER_PARITY
 	bic	r0, r0, #PJ4B_STATIC_BP
 	mcr	p15, 1,	r0, c15, c1, 1

arch/arm/mm/proc-xscale.S

@@ -535,7 +535,7 @@ ENTRY(cpu_xscale_do_suspend)
 	mrc	p15, 0, r5, c15, c1, 0	@ CP access reg
 	mrc	p15, 0, r6, c13, c0, 0	@ PID
 	mrc	p15, 0, r7, c3, c0, 0	@ domain ID
-	mrc	p15, 0, r8, c1, c1, 0	@ auxiliary control reg
+	mrc	p15, 0, r8, c1, c0, 1	@ auxiliary control reg
 	mrc	p15, 0, r9, c1, c0, 0	@ control reg
 	bic	r4, r4, #2		@ clear frequency change bit
 	stmia	r0, {r4 - r9}		@ store cp regs
@@ -552,7 +552,7 @@ ENTRY(cpu_xscale_do_resume)
 	mcr	p15, 0, r6, c13, c0, 0	@ PID
 	mcr	p15, 0, r7, c3, c0, 0	@ domain ID
 	mcr	p15, 0, r1, c2, c0, 0	@ translation table base addr
-	mcr	p15, 0, r8, c1, c1, 0	@ auxiliary control reg
+	mcr	p15, 0, r8, c1, c0, 1	@ auxiliary control reg
 	mov	r0, r9			@ control register
 	b	cpu_resume_mmu
 ENDPROC(cpu_xscale_do_resume)