ARM: dts: Fix LEDs for igepv5

The LEDs on igepv5 are on the GPIO expander unlike on omap5-uevm.

Configuration copied from git.isee.biz git tree except fixed for
red and blue mapping.

Signed-off-by: Tony Lindgren <tony@atomide.com>

arch/arm/boot/dts/omap5-board-common.dtsi

@@ -77,16 +77,6 @@
 		reset-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; /* gpio3_79 ETH_NRESET */
 	};
 
-	leds {
-		compatible = "gpio-leds";
-		led1 {
-			label = "omap5:blue:usr1";
-			gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>; /* gpio5_153 D1 LED */
-			linux,default-trigger = "heartbeat";
-			default-state = "off";
-		};
-	};
-
 	tpd12s015: encoder {
 		compatible = "ti,tpd12s015";
 

arch/arm/boot/dts/omap5-igep0050.dts

@@ -30,6 +30,25 @@
 			gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
 		};
 	};
+
+	leds {
+		compatible = "gpio-leds";
+		led@1 {
+			label = "board:green:usr0";
+			gpios = <&tca6416 1 0>;
+			default-state = "off";
+		};
+		led@2 {
+			label = "board:red:usr1";
+			gpios = <&tca6416 2 0>;
+			default-state = "off";
+		};
+		led@3 {
+			label = "board:blue:usr1";
+			gpios = <&tca6416 3 0>;
+			default-state = "off";
+		};
+	};
 };
 
 &hdmi {

arch/arm/boot/dts/omap5-uevm.dts

@@ -17,6 +17,16 @@
 		device_type = "memory";
 		reg = <0x80000000 0x7F000000>; /* 2032 MB */
 	};
+
+	leds {
+		compatible = "gpio-leds";
+		led1 {
+			label = "omap5:blue:usr1";
+			gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>; /* gpio5_153 D1 LED */
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+	};
 };
 
 &hdmi {