Merge tag 'zynq-soc-for-4.6' of https://github.com/Xilinx/linux-xlnx into next/soc

Merge "ARM: Xilinx Zynq patches for v4.6" from Michal Simek:

- SLCR early init
- Fix L2 cache data corruption
- Fix early printk uart setting

* tag 'zynq-soc-for-4.6' of https://github.com/Xilinx/linux-xlnx:
  ARM: zynq: Move early printk virtual address to vmalloc area
  ARM: zynq: address L2 cache data corruption
  ARM: zynq: initialize slcr mapping earlier

arch/arm/include/debug/zynq.S

@@ -20,9 +20,9 @@
 #define UART_SR_TXEMPTY		0x00000008	/* TX FIFO empty */
 
 #define UART0_PHYS		0xE0000000
-#define UART0_VIRT		0xF0000000
+#define UART0_VIRT		0xF0800000
 #define UART1_PHYS		0xE0001000
-#define UART1_VIRT		0xF0001000
+#define UART1_VIRT		0xF0801000
 
 #if IS_ENABLED(CONFIG_DEBUG_ZYNQ_UART1)
 # define LL_UART_PADDR		UART1_PHYS

arch/arm/mach-zynq/common.c

@@ -150,8 +150,6 @@ out:
 
 static void __init zynq_timer_init(void)
 {
-	zynq_early_slcr_init();
-
 	zynq_clock_init();
 	of_clk_init(NULL);
 	clocksource_probe();
@@ -186,6 +184,7 @@ static void __init zynq_map_io(void)
 
 static void __init zynq_irq_init(void)
 {
+	zynq_early_slcr_init();
 	irqchip_init();
 }
 

arch/arm/mach-zynq/slcr.c

@@ -28,6 +28,7 @@
 #define SLCR_A9_CPU_RST_CTRL_OFFSET	0x244 /* CPU Software Reset Control */
 #define SLCR_REBOOT_STATUS_OFFSET	0x258 /* PS Reboot Status */
 #define SLCR_PSS_IDCODE			0x530 /* PS IDCODE */
+#define SLCR_L2C_RAM			0xA1C /* L2C_RAM in AR#54190 */
 
 #define SLCR_UNLOCK_MAGIC		0xDF0D
 #define SLCR_A9_CPU_CLKSTOP		0x10
@@ -227,6 +228,9 @@ int __init zynq_early_slcr_init(void)
 	/* unlock the SLCR so that registers can be changed */
 	zynq_slcr_unlock();
 
+	/* See AR#54190 design advisory */
+	regmap_update_bits(zynq_slcr_regmap, SLCR_L2C_RAM, 0x70707, 0x20202);
+
 	register_restart_handler(&zynq_slcr_restart_nb);
 
 	pr_info("%s mapped to %p\n", np->name, zynq_slcr_base);