Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform updates from Arnd Bergmann:
 "These are updates for platform specific code on 32-bit ARM machines,
  essentially anything that can not (yet) be expressed using DT files.

  Noteworthy changes include:

   - Added support for the TI DRA71x family of SoCs in mach-omap2, this
     is an new variant of the the DRA72x/DRA74x automotive infotainment
     chips we already supported for a while.

   - Added support for the ST STM32F746 SoC, the first Cortex-M7 based
     microcontroller we support, related to the smaller STM32F4 family.

   - Renesas adds support for r8a7743 and r8a7745 in mach-shmobile, see
     http://elinux.org/RZ-G

   - SMP is now supported on the OX820 platform

   - A lot of code in mach-omap2 gets removed as a follow-up to removing
     support for board files in the previous release

   - Davinci has some new work to improve USB support

   - For i.MX, the performance monitor now supports profiling the memory
     controller using 'perf'"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (95 commits)
  ARM: davinci: da830-evm: use gpio descriptor for mmc pins
  ARM: davinci: da850-evm: use gpio descriptor for mmc pins
  ARM: davinci: hawk: use gpio descriptor for mmc pins
  ARM: ARTPEC-6: add select MFD_SYSCON to MACH_ARTPEC6
  ARM: davinci: da8xx: Fix ohci device name
  ARM: oxnas: Add OX820 config and makefile entry
  ARM: oxnas: Add OX820 SMP support
  ARM: davinci: PM: fix build when da850 not compiled in
  ARM: orion5x: remove legacy support of ls-chl
  ARM: integrator: drop EBI access use syscon
  ARM: BCM5301X: Add back handler ignoring external imprecise aborts
  ARM: davinci: PM: support da8xx DT platforms
  ARM: davinci: PM: cleanup: remove references to pdata
  ARM: davinci: PM: rework init, remove platform device
  ARM: Kconfig: Introduce MACH_STM32F746 flag
  ARM: mach-stm32: Add a new SOC - STM32F746
  ARM: shmobile: document SK-RZG1E board
  ARM: shmobile: r8a7745: basic SoC support
  ARM: imx: mach-imx6ul: add imx6ull support
  ARM: zynq: Reserve correct amount of non-DMA RAM
  ...

Documentation/arm/stm32/overview.txt

@@ -5,7 +5,8 @@ Introduction
 ------------
 
   The STMicroelectronics family of Cortex-M based MCUs are supported by the
-  'STM32' platform of ARM Linux. Currently only the STM32F429 is supported.
+  'STM32' platform of ARM Linux. Currently only the STM32F429 (Cortex-M4)
+  and STM32F746 (Cortex-M7) are supported.
 
 
 Configuration

Documentation/arm/stm32/stm32f746-overview.txt

@@ -0,0 +1,34 @@
+			STM32F746 Overview
+			==================
+
+  Introduction
+  ------------
+	The STM32F746 is a Cortex-M7 MCU aimed at various applications.
+	It features:
+	- Cortex-M7 core running up to @216MHz
+	- 1MB internal flash, 320KBytes internal RAM (+4KB of backup SRAM)
+	- FMC controller to connect SDRAM, NOR and NAND memories
+	- Dual mode QSPI
+	- SD/MMC/SDIO support
+	- Ethernet controller
+	- USB OTFG FS & HS controllers
+	- I2C, SPI, CAN busses support
+	- Several 16 & 32 bits general purpose timers
+	- Serial Audio interface
+	- LCD controller
+	- HDMI-CEC
+	- SPDIFRX
+
+  Resources
+  ---------
+	Datasheet and reference manual are publicly available on ST website:
+	- http://www.st.com/content/st_com/en/products/microcontrollers/stm32-32-bit-arm-cortex-mcus/stm32f7-series/stm32f7x6/stm32f746ng.html
+
+  Document Author
+  ---------------
+	Alexandre Torgue <alexandre.torgue@st.com>
+
+
+
+
+

Documentation/devicetree/bindings/arm/omap/omap.txt

@@ -86,6 +86,9 @@ SoCs:
 - DRA722
   compatible = "ti,dra722", "ti,dra72", "ti,dra7"
 
+- DRA718
+  compatible = "ti,dra718", "ti,dra722", "ti,dra72", "ti,dra7"
+
 - AM5728
   compatible = "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7"
 
@@ -181,6 +184,9 @@ Boards:
 - DRA722 EVM: Software Development Board for DRA722
   compatible = "ti,dra72-evm", "ti,dra722", "ti,dra72", "ti,dra7"
 
+- DRA718 EVM: Software Development Board for DRA718
+  compatible = "ti,dra718-evm", "ti,dra718", "ti,dra722", "ti,dra72", "ti,dra7"
+
 - DM3730 Logic PD Torpedo + Wireless: Commercial System on Module with WiFi and Bluetooth
   compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap3630", "ti,omap3"
 

Documentation/devicetree/bindings/arm/shmobile.txt

@@ -13,6 +13,10 @@ SoCs:
     compatible = "renesas,r8a73a4"
   - R-Mobile A1 (R8A77400)
     compatible = "renesas,r8a7740"
+  - RZ/G1M (R8A77430)
+    compatible = "renesas,r8a7743"
+  - RZ/G1E (R8A77450)
+    compatible = "renesas,r8a7745"
   - R-Car M1A (R8A77781)
     compatible = "renesas,r8a7778"
   - R-Car H1 (R8A77790)
@@ -35,7 +39,7 @@ SoCs:
 
 Boards:
 
-  - Alt
+  - Alt (RTP0RC7794SEB00010S)
     compatible = "renesas,alt", "renesas,r8a7794"
   - APE6-EVM
     compatible = "renesas,ape6evm", "renesas,r8a73a4"
@@ -47,7 +51,7 @@ Boards:
     compatible = "renesas,bockw", "renesas,r8a7778"
   - Genmai (RTK772100BC00000BR)
     compatible = "renesas,genmai", "renesas,r7s72100"
-  - Gose
+  - Gose (RTP0RC7793SEB00010S)
     compatible = "renesas,gose", "renesas,r8a7793"
   - H3ULCB (RTP0RC7795SKB00010S)
     compatible = "renesas,h3ulcb", "renesas,r8a7795";
@@ -61,7 +65,7 @@ Boards:
     compatible = "renesas,kzm9g", "renesas,sh73a0"
   - Lager (RTP0RC7790SEB00010S)
     compatible = "renesas,lager", "renesas,r8a7790"
-  - Marzen
+  - Marzen (R0P7779A00010S)
     compatible = "renesas,marzen", "renesas,r8a7779"
   - Porter (M2-LCDP)
     compatible = "renesas,porter", "renesas,r8a7791"
@@ -73,5 +77,9 @@ Boards:
     compatible = "renesas,salvator-x", "renesas,r8a7796";
   - SILK (RTP0RC7794LCB00011S)
     compatible = "renesas,silk", "renesas,r8a7794"
+  - SK-RZG1E (YR8A77450S000BE)
+    compatible = "renesas,sk-rzg1e", "renesas,r8a7745"
+  - SK-RZG1M (YR8A77430S000BE)
+    compatible = "renesas,sk-rzg1m", "renesas,r8a7743"
   - Wheat
     compatible = "renesas,wheat", "renesas,r8a7792"

arch/arm/Kconfig

@@ -888,6 +888,11 @@ config MACH_STM32F429
 	depends on ARCH_STM32
 	default y
 
+config MACH_STM32F746
+	bool "STMicrolectronics STM32F746"
+	depends on ARCH_STM32
+	default y
+
 config ARCH_MPS2
 	bool "ARM MPS2 platform"
 	depends on ARM_SINGLE_ARMV7M

arch/arm/Makefile

@@ -191,6 +191,7 @@ machine-$(CONFIG_ARCH_MXS)		+= mxs
 machine-$(CONFIG_ARCH_NETX)		+= netx
 machine-$(CONFIG_ARCH_NOMADIK)		+= nomadik
 machine-$(CONFIG_ARCH_NSPIRE)		+= nspire
+machine-$(CONFIG_ARCH_OXNAS)		+= oxnas
 machine-$(CONFIG_ARCH_OMAP1)		+= omap1
 machine-$(CONFIG_ARCH_OMAP2PLUS)	+= omap2
 machine-$(CONFIG_ARCH_ORION5X)		+= orion5x

arch/arm/mach-artpec/Kconfig

@@ -14,6 +14,7 @@ config MACH_ARTPEC6
 	select HAVE_ARM_ARCH_TIMER
 	select HAVE_ARM_SCU
 	select HAVE_ARM_TWD if SMP
+	select MFD_SYSCON
 	help
 	  Support for Axis ARTPEC-6 ARM Cortex A9 Platform
 

arch/arm/mach-bcm/bcm_5301x.c

@@ -9,14 +9,42 @@
 #include <asm/hardware/cache-l2x0.h>
 
 #include <asm/mach/arch.h>
+#include <asm/siginfo.h>
+#include <asm/signal.h>
+
+#define FSR_EXTERNAL		(1 << 12)
+#define FSR_READ		(0 << 10)
+#define FSR_IMPRECISE		0x0406
 
 static const char *const bcm5301x_dt_compat[] __initconst = {
 	"brcm,bcm4708",
 	NULL,
 };
 
+static int bcm5301x_abort_handler(unsigned long addr, unsigned int fsr,
+				  struct pt_regs *regs)
+{
+	/*
+	 * We want to ignore aborts forwarded from the PCIe bus that are
+	 * expected and shouldn't really be passed by the PCIe controller.
+	 * The biggest disadvantage is the same FSR code may be reported when
+	 * reading non-existing APB register and we shouldn't ignore that.
+	 */
+	if (fsr == (FSR_EXTERNAL | FSR_READ | FSR_IMPRECISE))
+		return 0;
+
+	return 1;
+}
+
+static void __init bcm5301x_init_early(void)
+{
+	hook_fault_code(16 + 6, bcm5301x_abort_handler, SIGBUS, BUS_OBJERR,
+			"imprecise external abort");
+}
+
 DT_MACHINE_START(BCM5301X, "BCM5301X")
 	.l2c_aux_val	= 0,
 	.l2c_aux_mask	= ~0,
 	.dt_compat	= bcm5301x_dt_compat,
+	.init_early	= bcm5301x_init_early,
 MACHINE_END

arch/arm/mach-davinci/Makefile

@@ -36,5 +36,7 @@ obj-$(CONFIG_MACH_OMAPL138_HAWKBOARD)	+= board-omapl138-hawk.o
 
 # Power Management
 obj-$(CONFIG_CPU_IDLE)			+= cpuidle.o
-obj-$(CONFIG_SUSPEND)			+= pm.o sleep.o
 obj-$(CONFIG_HAVE_CLK)			+= pm_domain.o
+ifeq ($(CONFIG_SUSPEND),y)
+obj-$(CONFIG_ARCH_DAVINCI_DA850)	+= pm.o sleep.o
+endif

arch/arm/mach-davinci/board-da830-evm.c

@@ -14,6 +14,7 @@
 #include <linux/console.h>
 #include <linux/interrupt.h>
 #include <linux/gpio.h>
+#include <linux/gpio/machine.h>
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
 #include <linux/i2c/pcf857x.h>
@@ -27,6 +28,7 @@
 #include <linux/platform_data/mtd-davinci-aemif.h>
 #include <linux/platform_data/spi-davinci.h>
 #include <linux/platform_data/usb-davinci.h>
+#include <linux/regulator/machine.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -106,43 +108,24 @@ static irqreturn_t da830_evm_usb_ocic_irq(int irq, void *dev_id)
 
 static __init void da830_evm_usb_init(void)
 {
-	u32 cfgchip2;
 	int ret;
 
-	/*
-	 * Set up USB clock/mode in the CFGCHIP2 register.
-	 * FYI:  CFGCHIP2 is 0x0000ef00 initially.
-	 */
-	cfgchip2 = __raw_readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG));
-
-	/* USB2.0 PHY reference clock is 24 MHz */
-	cfgchip2 &= ~CFGCHIP2_REFFREQ;
-	cfgchip2 |=  CFGCHIP2_REFFREQ_24MHZ;
-
-	/*
-	 * Select internal reference clock for USB 2.0 PHY
-	 * and use it as a clock source for USB 1.1 PHY
-	 * (this is the default setting anyway).
-	 */
-	cfgchip2 &= ~CFGCHIP2_USB1PHYCLKMUX;
-	cfgchip2 |=  CFGCHIP2_USB2PHYCLKMUX;
-
-	/*
-	 * We have to override VBUS/ID signals when MUSB is configured into the
-	 * host-only mode -- ID pin will float if no cable is connected, so the
-	 * controller won't be able to drive VBUS thinking that it's a B-device.
-	 * Otherwise, we want to use the OTG mode and enable VBUS comparators.
-	 */
-	cfgchip2 &= ~CFGCHIP2_OTGMODE;
-#ifdef	CONFIG_USB_MUSB_HOST
-	cfgchip2 |=  CFGCHIP2_FORCE_HOST;
-#else
-	cfgchip2 |=  CFGCHIP2_SESENDEN | CFGCHIP2_VBDTCTEN;
-#endif
+	/* USB_REFCLKIN is not used. */
+	ret = da8xx_register_usb20_phy_clk(false);
+	if (ret)
+		pr_warn("%s: USB 2.0 PHY CLK registration failed: %d\n",
+			__func__, ret);
 
-	__raw_writel(cfgchip2, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG));
+	ret = da8xx_register_usb11_phy_clk(false);
+	if (ret)
+		pr_warn("%s: USB 1.1 PHY CLK registration failed: %d\n",
+			__func__, ret);
+
+	ret = da8xx_register_usb_phy();
+	if (ret)
+		pr_warn("%s: USB PHY registration failed: %d\n",
+			__func__, ret);
 
-	/* USB_REFCLKIN is not used. */
 	ret = davinci_cfg_reg(DA830_USB0_DRVVBUS);
 	if (ret)
 		pr_warn("%s: USB 2.0 PinMux setup failed: %d\n", __func__, ret);
@@ -222,22 +205,16 @@ static const short da830_evm_mmc_sd_pins[] = {
 	-1
 };
 
-#define DA830_MMCSD_WP_PIN		GPIO_TO_PIN(2, 1)
-#define DA830_MMCSD_CD_PIN		GPIO_TO_PIN(2, 2)
-
-static int da830_evm_mmc_get_ro(int index)
-{
-	return gpio_get_value(DA830_MMCSD_WP_PIN);
-}
-
-static int da830_evm_mmc_get_cd(int index)
-{
-	return !gpio_get_value(DA830_MMCSD_CD_PIN);
-}
+static struct gpiod_lookup_table mmc_gpios_table = {
+	.dev_id = "da830-mmc.0",
+	.table = {
+		/* gpio chip 1 contains gpio range 32-63 */
+		GPIO_LOOKUP("davinci_gpio.1", 2, "cd", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("davinci_gpio.1", 1, "wp", GPIO_ACTIVE_LOW),
+	},
+};
 
 static struct davinci_mmc_config da830_evm_mmc_config = {
-	.get_ro			= da830_evm_mmc_get_ro,
-	.get_cd			= da830_evm_mmc_get_cd,
 	.wires			= 8,
 	.max_freq		= 50000000,
 	.caps			= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
@@ -253,26 +230,12 @@ static inline void da830_evm_init_mmc(void)
 		return;
 	}
 
-	ret = gpio_request(DA830_MMCSD_WP_PIN, "MMC WP");
-	if (ret) {
-		pr_warn("%s: can not open GPIO %d\n",
-			__func__, DA830_MMCSD_WP_PIN);
-		return;
-	}
-	gpio_direction_input(DA830_MMCSD_WP_PIN);
-
-	ret = gpio_request(DA830_MMCSD_CD_PIN, "MMC CD\n");
-	if (ret) {
-		pr_warn("%s: can not open GPIO %d\n",
-			__func__, DA830_MMCSD_CD_PIN);
-		return;
-	}
-	gpio_direction_input(DA830_MMCSD_CD_PIN);
+	gpiod_add_lookup_table(&mmc_gpios_table);
 
 	ret = da8xx_register_mmcsd0(&da830_evm_mmc_config);
 	if (ret) {
 		pr_warn("%s: mmc/sd registration failed: %d\n", __func__, ret);
-		gpio_free(DA830_MMCSD_WP_PIN);
+		gpiod_remove_lookup_table(&mmc_gpios_table);
 	}
 }
 
@@ -588,6 +551,10 @@ static __init void da830_evm_init(void)
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
 	int ret;
 
+	ret = da8xx_register_cfgchip();
+	if (ret)
+		pr_warn("%s: CFGCHIP registration failed: %d\n", __func__, ret);
+
 	ret = da830_register_gpio();
 	if (ret)
 		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
@@ -647,6 +614,8 @@ static __init void da830_evm_init(void)
 	ret = da8xx_register_spi_bus(0, ARRAY_SIZE(da830evm_spi_info));
 	if (ret)
 		pr_warn("%s: spi 0 registration failed: %d\n", __func__, ret);
+
+	regulator_has_full_constraints();
 }
 
 #ifdef CONFIG_SERIAL_8250_CONSOLE

arch/arm/mach-davinci/board-da850-evm.c

@@ -15,6 +15,7 @@
 #include <linux/delay.h>
 #include <linux/gpio.h>
 #include <linux/gpio_keys.h>
+#include <linux/gpio/machine.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/i2c.h>
@@ -56,9 +57,6 @@
 #define DA850_LCD_PWR_PIN		GPIO_TO_PIN(2, 8)
 #define DA850_LCD_BL_PIN		GPIO_TO_PIN(2, 15)
 
-#define DA850_MMCSD_CD_PIN		GPIO_TO_PIN(4, 0)
-#define DA850_MMCSD_WP_PIN		GPIO_TO_PIN(4, 1)
-
 #define DA850_MII_MDIO_CLKEN_PIN	GPIO_TO_PIN(2, 6)
 
 static struct mtd_partition da850evm_spiflash_part[] = {
@@ -196,18 +194,6 @@ static struct platform_device da850_evm_norflash_device = {
 	.resource	= da850_evm_norflash_resource,
 };
 
-static struct davinci_pm_config da850_pm_pdata = {
-	.sleepcount = 128,
-};
-
-static struct platform_device da850_pm_device = {
-	.name           = "pm-davinci",
-	.dev = {
-		.platform_data	= &da850_pm_pdata,
-	},
-	.id             = -1,
-};
-
 /* DA850/OMAP-L138 EVM includes a 512 MByte large-page NAND flash
  * (128K blocks). It may be used instead of the (default) SPI flash
  * to boot, using TI's tools to install the secondary boot loader
@@ -776,19 +762,16 @@ static const short da850_evm_mcasp_pins[] __initconst = {
 	-1
 };
 
-static int da850_evm_mmc_get_ro(int index)
-{
-	return gpio_get_value(DA850_MMCSD_WP_PIN);
-}
-
-static int da850_evm_mmc_get_cd(int index)
-{
-	return !gpio_get_value(DA850_MMCSD_CD_PIN);
-}
+static struct gpiod_lookup_table mmc_gpios_table = {
+	.dev_id = "da830-mmc.0",
+	.table = {
+		/* gpio chip 2 contains gpio range 64-95 */
+		GPIO_LOOKUP("davinci_gpio.2", 0, "cd", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("davinci_gpio.2", 1, "wp", GPIO_ACTIVE_LOW),
+	},
+};
 
 static struct davinci_mmc_config da850_mmc_config = {
-	.get_ro		= da850_evm_mmc_get_ro,
-	.get_cd		= da850_evm_mmc_get_cd,
 	.wires		= 4,
 	.max_freq	= 50000000,
 	.caps		= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
@@ -1345,6 +1328,10 @@ static __init void da850_evm_init(void)
 {
 	int ret;
 
+	ret = da8xx_register_cfgchip();
+	if (ret)
+		pr_warn("%s: CFGCHIP registration failed: %d\n", __func__, ret);
+
 	ret = da850_register_gpio();
 	if (ret)
 		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
@@ -1379,17 +1366,7 @@ static __init void da850_evm_init(void)
 			pr_warn("%s: MMCSD0 mux setup failed: %d\n",
 				__func__, ret);
 
-		ret = gpio_request(DA850_MMCSD_CD_PIN, "MMC CD\n");
-		if (ret)
-			pr_warn("%s: can not open GPIO %d\n",
-				__func__, DA850_MMCSD_CD_PIN);
-		gpio_direction_input(DA850_MMCSD_CD_PIN);
-
-		ret = gpio_request(DA850_MMCSD_WP_PIN, "MMC WP\n");
-		if (ret)
-			pr_warn("%s: can not open GPIO %d\n",
-				__func__, DA850_MMCSD_WP_PIN);
-		gpio_direction_input(DA850_MMCSD_WP_PIN);
+		gpiod_add_lookup_table(&mmc_gpios_table);
 
 		ret = da8xx_register_mmcsd0(&da850_mmc_config);
 		if (ret)
@@ -1453,10 +1430,7 @@ static __init void da850_evm_init(void)
 	if (ret)
 		pr_warn("%s: cpuidle registration failed: %d\n", __func__, ret);
 
-	ret = da850_register_pm(&da850_pm_device);
-	if (ret)
-		pr_warn("%s: suspend registration failed: %d\n", __func__, ret);
-
+	davinci_pm_init();
 	da850_vpif_init();
 
 	ret = spi_register_board_info(da850evm_spi_info,

arch/arm/mach-davinci/board-mityomapl138.c

@@ -498,22 +498,14 @@ static void __init mityomapl138_config_emac(void)
 		pr_warn("emac registration failed: %d\n", ret);
 }
 
-static struct davinci_pm_config da850_pm_pdata = {
-	.sleepcount = 128,
-};
-
-static struct platform_device da850_pm_device = {
-	.name	= "pm-davinci",
-	.dev = {
-		.platform_data  = &da850_pm_pdata,
-	},
-	.id	= -1,
-};
-
 static void __init mityomapl138_init(void)
 {
 	int ret;
 
+	ret = da8xx_register_cfgchip();
+	if (ret)
+		pr_warn("%s: CFGCHIP registration failed: %d\n", __func__, ret);
+
 	/* for now, no special EDMA channels are reserved */
 	ret = da850_register_edma(NULL);
 	if (ret)
@@ -555,9 +547,7 @@ static void __init mityomapl138_init(void)
 	if (ret)
 		pr_warn("cpuidle registration failed: %d\n", ret);
 
-	ret = da850_register_pm(&da850_pm_device);
-	if (ret)
-		pr_warn("suspend registration failed: %d\n", ret);
+	davinci_pm_init();
 }
 
 #ifdef CONFIG_SERIAL_8250_CONSOLE

arch/arm/mach-davinci/board-omapl138-hawk.c

@@ -13,7 +13,9 @@
 #include <linux/init.h>
 #include <linux/console.h>
 #include <linux/gpio.h>
+#include <linux/gpio/machine.h>
 #include <linux/platform_data/gpio-davinci.h>
+#include <linux/regulator/machine.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -24,8 +26,6 @@
 #include <mach/mux.h>
 
 #define HAWKBOARD_PHY_ID		"davinci_mdio-0:07"
-#define DA850_HAWK_MMCSD_CD_PIN		GPIO_TO_PIN(3, 12)
-#define DA850_HAWK_MMCSD_WP_PIN		GPIO_TO_PIN(3, 13)
 
 #define DA850_USB1_VBUS_PIN		GPIO_TO_PIN(2, 4)
 #define DA850_USB1_OC_PIN		GPIO_TO_PIN(6, 13)
@@ -122,19 +122,16 @@ static const short hawk_mmcsd0_pins[] = {
 	-1
 };
 
-static int da850_hawk_mmc_get_ro(int index)
-{
-	return gpio_get_value(DA850_HAWK_MMCSD_WP_PIN);
-}
-
-static int da850_hawk_mmc_get_cd(int index)
-{
-	return !gpio_get_value(DA850_HAWK_MMCSD_CD_PIN);
-}
+static struct gpiod_lookup_table mmc_gpios_table = {
+	.dev_id = "da830-mmc.0",
+	.table = {
+		/* CD: gpio3_12: gpio60: chip 1 contains gpio range 32-63*/
+		GPIO_LOOKUP("davinci_gpio.1", 28, "cd", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("davinci_gpio.1", 29, "wp", GPIO_ACTIVE_LOW),
+	},
+};
 
 static struct davinci_mmc_config da850_mmc_config = {
-	.get_ro		= da850_hawk_mmc_get_ro,
-	.get_cd		= da850_hawk_mmc_get_cd,
 	.wires		= 4,
 	.max_freq	= 50000000,
 	.caps		= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
@@ -150,21 +147,7 @@ static __init void omapl138_hawk_mmc_init(void)
 		return;
 	}
 
-	ret = gpio_request_one(DA850_HAWK_MMCSD_CD_PIN,
-			GPIOF_DIR_IN, "MMC CD");
-	if (ret < 0) {
-		pr_warn("%s: can not open GPIO %d\n",
-			__func__, DA850_HAWK_MMCSD_CD_PIN);
-		return;
-	}
-
-	ret = gpio_request_one(DA850_HAWK_MMCSD_WP_PIN,
-			GPIOF_DIR_IN, "MMC WP");
-	if (ret < 0) {
-		pr_warn("%s: can not open GPIO %d\n",
-			__func__, DA850_HAWK_MMCSD_WP_PIN);
-		goto mmc_setup_wp_fail;
-	}
+	gpiod_add_lookup_table(&mmc_gpios_table);
 
 	ret = da8xx_register_mmcsd0(&da850_mmc_config);
 	if (ret) {
@@ -175,9 +158,7 @@ static __init void omapl138_hawk_mmc_init(void)
 	return;
 
 mmc_setup_mmcsd_fail:
-	gpio_free(DA850_HAWK_MMCSD_WP_PIN);
-mmc_setup_wp_fail:
-	gpio_free(DA850_HAWK_MMCSD_CD_PIN);
+	gpiod_remove_lookup_table(&mmc_gpios_table);
 }
 
 static irqreturn_t omapl138_hawk_usb_ocic_irq(int irq, void *dev_id);
@@ -243,7 +224,6 @@ static irqreturn_t omapl138_hawk_usb_ocic_irq(int irq, void *dev_id)
 static __init void omapl138_hawk_usb_init(void)
 {
 	int ret;
-	u32 cfgchip2;
 
 	ret = davinci_cfg_reg_list(da850_hawk_usb11_pins);
 	if (ret) {
@@ -251,12 +231,20 @@ static __init void omapl138_hawk_usb_init(void)
 		return;
 	}
 
-	/* Setup the Ref. clock frequency for the HAWK at 24 MHz. */
+	ret = da8xx_register_usb20_phy_clk(false);
+	if (ret)
+		pr_warn("%s: USB 2.0 PHY CLK registration failed: %d\n",
+			__func__, ret);
 
-	cfgchip2 = __raw_readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG));
-	cfgchip2 &= ~CFGCHIP2_REFFREQ;
-	cfgchip2 |=  CFGCHIP2_REFFREQ_24MHZ;
-	__raw_writel(cfgchip2, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG));
+	ret = da8xx_register_usb11_phy_clk(false);
+	if (ret)
+		pr_warn("%s: USB 1.1 PHY CLK registration failed: %d\n",
+			__func__, ret);
+
+	ret = da8xx_register_usb_phy();
+	if (ret)
+		pr_warn("%s: USB PHY registration failed: %d\n",
+			__func__, ret);
 
 	ret = gpio_request_one(DA850_USB1_VBUS_PIN,
 			GPIOF_DIR_OUT, "USB1 VBUS");
@@ -292,6 +280,10 @@ static __init void omapl138_hawk_init(void)
 {
 	int ret;
 
+	ret = da8xx_register_cfgchip();
+	if (ret)
+		pr_warn("%s: CFGCHIP registration failed: %d\n", __func__, ret);
+
 	ret = da850_register_gpio();
 	if (ret)
 		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
@@ -317,6 +309,8 @@ static __init void omapl138_hawk_init(void)
 	if (ret)
 		pr_warn("%s: dsp/rproc registration failed: %d\n",
 			__func__, ret);
+
+	regulator_has_full_constraints();
 }
 
 #ifdef CONFIG_SERIAL_8250_CONSOLE

arch/arm/mach-davinci/common.c

@@ -118,6 +118,5 @@ err:
 void __init davinci_init_late(void)
 {
 	davinci_cpufreq_init();
-	davinci_pm_init();
 	davinci_clk_disable_unused();
 }

arch/arm/mach-davinci/da830.c

@@ -412,7 +412,7 @@ static struct clk_lookup da830_clks[] = {
 	CLK("davinci-mcasp.0",	NULL,		&mcasp0_clk),
 	CLK("davinci-mcasp.1",	NULL,		&mcasp1_clk),
 	CLK("davinci-mcasp.2",	NULL,		&mcasp2_clk),
-	CLK(NULL,		"usb20",	&usb20_clk),
+	CLK("musb-da8xx",	"usb20",	&usb20_clk),
 	CLK(NULL,		"aemif",	&aemif_clk),
 	CLK(NULL,		"aintc",	&aintc_clk),
 	CLK(NULL,		"secu_mgr",	&secu_mgr_clk),
@@ -420,7 +420,7 @@ static struct clk_lookup da830_clks[] = {
 	CLK("davinci_mdio.0",   "fck",          &emac_clk),
 	CLK(NULL,		"gpio",		&gpio_clk),
 	CLK("i2c_davinci.2",	NULL,		&i2c1_clk),
-	CLK(NULL,		"usb11",	&usb11_clk),
+	CLK("ohci-da8xx",	"usb11",	&usb11_clk),
 	CLK(NULL,		"emif3",	&emif3_clk),
 	CLK(NULL,		"arm",		&arm_clk),
 	CLK(NULL,		"rmii",		&rmii_clk),

arch/arm/mach-davinci/da850.c

@@ -538,8 +538,8 @@ static struct clk_lookup da850_clks[] = {
 	CLK("da830-mmc.1",	NULL,		&mmcsd1_clk),
 	CLK("ti-aemif",		NULL,		&aemif_clk),
 	CLK(NULL,		"aemif",	&aemif_clk),
-	CLK(NULL,		"usb11",	&usb11_clk),
-	CLK(NULL,		"usb20",	&usb20_clk),
+	CLK("ohci-da8xx",	"usb11",	&usb11_clk),
+	CLK("musb-da8xx",	"usb20",	&usb20_clk),
 	CLK("spi_davinci.0",	NULL,		&spi0_clk),
 	CLK("spi_davinci.1",	NULL,		&spi1_clk),
 	CLK("vpif",		NULL,		&vpif_clk),
@@ -1214,44 +1214,6 @@ static int da850_round_armrate(struct clk *clk, unsigned long rate)
 }
 #endif
 
-int __init da850_register_pm(struct platform_device *pdev)
-{
-	int ret;
-	struct davinci_pm_config *pdata = pdev->dev.platform_data;
-
-	ret = davinci_cfg_reg(DA850_RTC_ALARM);
-	if (ret)
-		return ret;
-
-	pdata->ddr2_ctlr_base = da8xx_get_mem_ctlr();
-	pdata->deepsleep_reg = DA8XX_SYSCFG1_VIRT(DA8XX_DEEPSLEEP_REG);
-	pdata->ddrpsc_num = DA8XX_LPSC1_EMIF3C;
-
-	pdata->cpupll_reg_base = ioremap(DA8XX_PLL0_BASE, SZ_4K);
-	if (!pdata->cpupll_reg_base)
-		return -ENOMEM;
-
-	pdata->ddrpll_reg_base = ioremap(DA850_PLL1_BASE, SZ_4K);
-	if (!pdata->ddrpll_reg_base) {
-		ret = -ENOMEM;
-		goto no_ddrpll_mem;
-	}
-
-	pdata->ddrpsc_reg_base = ioremap(DA8XX_PSC1_BASE, SZ_4K);
-	if (!pdata->ddrpsc_reg_base) {
-		ret = -ENOMEM;
-		goto no_ddrpsc_mem;
-	}
-
-	return platform_device_register(pdev);
-
-no_ddrpsc_mem:
-	iounmap(pdata->ddrpll_reg_base);
-no_ddrpll_mem:
-	iounmap(pdata->cpupll_reg_base);
-	return ret;
-}
-
 /* VPIF resource, platform data */
 static u64 da850_vpif_dma_mask = DMA_BIT_MASK(32);
 

arch/arm/mach-davinci/da8xx-dt.c

@@ -38,6 +38,10 @@ static struct of_dev_auxdata da850_auxdata_lookup[] __initdata = {
 		       NULL),
 	OF_DEV_AUXDATA("ti,da830-mcasp-audio", 0x01d00000, "davinci-mcasp.0", NULL),
 	OF_DEV_AUXDATA("ti,da850-aemif", 0x68000000, "ti-aemif", NULL),
+	OF_DEV_AUXDATA("ti,da850-tilcdc", 0x01e13000, "da8xx_lcdc.0", NULL),
+	OF_DEV_AUXDATA("ti,da830-ohci", 0x01e25000, "ohci-da8xx", NULL),
+	OF_DEV_AUXDATA("ti,da830-musb", 0x01e00000, "musb-da8xx", NULL),
+	OF_DEV_AUXDATA("ti,da830-usb-phy", 0x01c1417c, "da8xx-usb-phy", NULL),
 	{}
 };
 
@@ -45,7 +49,19 @@ static struct of_dev_auxdata da850_auxdata_lookup[] __initdata = {
 
 static void __init da850_init_machine(void)
 {
+	int ret;
+
+	ret = da8xx_register_usb20_phy_clk(false);
+	if (ret)
+		pr_warn("%s: registering USB 2.0 PHY clock failed: %d",
+			__func__, ret);
+	ret = da8xx_register_usb11_phy_clk(false);
+	if (ret)
+		pr_warn("%s: registering USB 1.1 PHY clock failed: %d",
+			__func__, ret);
+
 	of_platform_default_populate(NULL, da850_auxdata_lookup, NULL);
+	davinci_pm_init();
 }
 
 static const char *const da850_boards_compat[] __initconst = {

arch/arm/mach-davinci/devices-da8xx.c

@@ -11,6 +11,7 @@
  * (at your option) any later version.
  */
 #include <linux/init.h>
+#include <linux/platform_data/syscon.h>
 #include <linux/platform_device.h>
 #include <linux/dma-contiguous.h>
 #include <linux/serial_8250.h>
@@ -57,15 +58,6 @@
 #define DA8XX_EMAC_RAM_OFFSET		0x0000
 #define DA8XX_EMAC_CTRL_RAM_SIZE	SZ_8K
 
-#define DA8XX_DMA_SPI0_RX	EDMA_CTLR_CHAN(0, 14)
-#define DA8XX_DMA_SPI0_TX	EDMA_CTLR_CHAN(0, 15)
-#define DA8XX_DMA_MMCSD0_RX	EDMA_CTLR_CHAN(0, 16)
-#define DA8XX_DMA_MMCSD0_TX	EDMA_CTLR_CHAN(0, 17)
-#define DA8XX_DMA_SPI1_RX	EDMA_CTLR_CHAN(0, 18)
-#define DA8XX_DMA_SPI1_TX	EDMA_CTLR_CHAN(0, 19)
-#define DA850_DMA_MMCSD1_RX	EDMA_CTLR_CHAN(1, 28)
-#define DA850_DMA_MMCSD1_TX	EDMA_CTLR_CHAN(1, 29)
-
 void __iomem *da8xx_syscfg0_base;
 void __iomem *da8xx_syscfg1_base;
 
@@ -964,16 +956,6 @@ static struct resource da8xx_spi0_resources[] = {
 		.end	= IRQ_DA8XX_SPINT0,
 		.flags	= IORESOURCE_IRQ,
 	},
-	[2] = {
-		.start	= DA8XX_DMA_SPI0_RX,
-		.end	= DA8XX_DMA_SPI0_RX,
-		.flags	= IORESOURCE_DMA,
-	},
-	[3] = {
-		.start	= DA8XX_DMA_SPI0_TX,
-		.end	= DA8XX_DMA_SPI0_TX,
-		.flags	= IORESOURCE_DMA,
-	},
 };
 
 static struct resource da8xx_spi1_resources[] = {
@@ -987,16 +969,6 @@ static struct resource da8xx_spi1_resources[] = {
 		.end	= IRQ_DA8XX_SPINT1,
 		.flags	= IORESOURCE_IRQ,
 	},
-	[2] = {
-		.start	= DA8XX_DMA_SPI1_RX,
-		.end	= DA8XX_DMA_SPI1_RX,
-		.flags	= IORESOURCE_DMA,
-	},
-	[3] = {
-		.start	= DA8XX_DMA_SPI1_TX,
-		.end	= DA8XX_DMA_SPI1_TX,
-		.flags	= IORESOURCE_DMA,
-	},
 };
 
 static struct davinci_spi_platform_data da8xx_spi_pdata[] = {
@@ -1089,3 +1061,30 @@ int __init da850_register_sata(unsigned long refclkpn)
 	return platform_device_register(&da850_sata_device);
 }
 #endif
+
+static struct syscon_platform_data da8xx_cfgchip_platform_data = {
+	.label	= "cfgchip",
+};
+
+static struct resource da8xx_cfgchip_resources[] = {
+	{
+		.start	= DA8XX_SYSCFG0_BASE + DA8XX_CFGCHIP0_REG,
+		.end	= DA8XX_SYSCFG0_BASE + DA8XX_CFGCHIP4_REG + 3,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device da8xx_cfgchip_device = {
+	.name	= "syscon",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &da8xx_cfgchip_platform_data,
+	},
+	.num_resources	= ARRAY_SIZE(da8xx_cfgchip_resources),
+	.resource	= da8xx_cfgchip_resources,
+};
+
+int __init da8xx_register_cfgchip(void)
+{
+	return platform_device_register(&da8xx_cfgchip_device);
+}

arch/arm/mach-davinci/devices.c

@@ -36,9 +36,6 @@
 #define DM365_MMCSD0_BASE	     0x01D11000
 #define DM365_MMCSD1_BASE	     0x01D00000
 
-#define DAVINCI_DMA_MMCRXEVT	26
-#define DAVINCI_DMA_MMCTXEVT	27
-
 void __iomem  *davinci_sysmod_base;
 
 void davinci_map_sysmod(void)

arch/arm/mach-davinci/dm355.c

@@ -397,14 +397,6 @@ static struct resource dm355_spi0_resources[] = {
 		.start = IRQ_DM355_SPINT0_0,
 		.flags = IORESOURCE_IRQ,
 	},
-	{
-		.start = 17,
-		.flags = IORESOURCE_DMA,
-	},
-	{
-		.start = 16,
-		.flags = IORESOURCE_DMA,
-	},
 };
 
 static struct davinci_spi_platform_data dm355_spi0_pdata = {

arch/arm/mach-davinci/dm365.c

@@ -660,14 +660,6 @@ static struct resource dm365_spi0_resources[] = {
 		.start = IRQ_DM365_SPIINT0_0,
 		.flags = IORESOURCE_IRQ,
 	},
-	{
-		.start = 17,
-		.flags = IORESOURCE_DMA,
-	},
-	{
-		.start = 16,
-		.flags = IORESOURCE_DMA,
-	},
 };
 
 static struct platform_device dm365_spi0_device = {

arch/arm/mach-davinci/include/mach/da8xx.h

@@ -61,6 +61,7 @@ extern unsigned int da850_max_speed;
 #define DA8XX_CFGCHIP1_REG	0x180
 #define DA8XX_CFGCHIP2_REG	0x184
 #define DA8XX_CFGCHIP3_REG	0x188
+#define DA8XX_CFGCHIP4_REG	0x18c
 
 #define DA8XX_SYSCFG1_BASE	(IO_PHYS + 0x22C000)
 #define DA8XX_SYSCFG1_VIRT(x)	(da8xx_syscfg1_base + (x))
@@ -88,8 +89,12 @@ int da850_register_edma(struct edma_rsv_info *rsv[2]);
 int da8xx_register_i2c(int instance, struct davinci_i2c_platform_data *pdata);
 int da8xx_register_spi_bus(int instance, unsigned num_chipselect);
 int da8xx_register_watchdog(void);
+int da8xx_register_usb_phy(void);
 int da8xx_register_usb20(unsigned mA, unsigned potpgt);
 int da8xx_register_usb11(struct da8xx_ohci_root_hub *pdata);
+int da8xx_register_usb_refclkin(int rate);
+int da8xx_register_usb20_phy_clk(bool use_usb_refclkin);
+int da8xx_register_usb11_phy_clk(bool use_usb_refclkin);
 int da8xx_register_emac(void);
 int da8xx_register_uio_pruss(void);
 int da8xx_register_lcdc(struct da8xx_lcdc_platform_data *pdata);
@@ -101,7 +106,6 @@ int da8xx_register_gpio(void *pdata);
 int da850_register_cpufreq(char *async_clk);
 int da8xx_register_cpuidle(void);
 void __iomem *da8xx_get_mem_ctlr(void);
-int da850_register_pm(struct platform_device *pdev);
 int da850_register_sata(unsigned long refclkpn);
 int da850_register_vpif(void);
 int da850_register_vpif_display
@@ -113,6 +117,7 @@ void da8xx_rproc_reserve_cma(void);
 int da8xx_register_rproc(void);
 int da850_register_gpio(void);
 int da830_register_gpio(void);
+int da8xx_register_cfgchip(void);
 
 extern struct platform_device da8xx_serial_device[];
 extern struct emac_platform_data da8xx_emac_pdata;

arch/arm/mach-davinci/pm.c

@@ -21,15 +21,22 @@
 
 #include <mach/common.h>
 #include <mach/da8xx.h>
-#include "sram.h"
+#include <mach/mux.h>
 #include <mach/pm.h>
 
 #include "clock.h"
+#include "psc.h"
+#include "sram.h"
 
+#define DA850_PLL1_BASE		0x01e1a000
 #define DEEPSLEEP_SLEEPCOUNT_MASK	0xFFFF
+#define DEEPSLEEP_SLEEPCOUNT		128
 
 static void (*davinci_sram_suspend) (struct davinci_pm_config *);
-static struct davinci_pm_config *pdata;
+static struct davinci_pm_config pm_config = {
+	.sleepcount = DEEPSLEEP_SLEEPCOUNT,
+	.ddrpsc_num = DA8XX_LPSC1_EMIF3C,
+};
 
 static void davinci_sram_push(void *dest, void *src, unsigned int size)
 {
@@ -41,58 +48,58 @@ static void davinci_pm_suspend(void)
 {
 	unsigned val;
 
-	if (pdata->cpupll_reg_base != pdata->ddrpll_reg_base) {
+	if (pm_config.cpupll_reg_base != pm_config.ddrpll_reg_base) {
 
 		/* Switch CPU PLL to bypass mode */
-		val = __raw_readl(pdata->cpupll_reg_base + PLLCTL);
+		val = __raw_readl(pm_config.cpupll_reg_base + PLLCTL);
 		val &= ~(PLLCTL_PLLENSRC | PLLCTL_PLLEN);
-		__raw_writel(val, pdata->cpupll_reg_base + PLLCTL);
+		__raw_writel(val, pm_config.cpupll_reg_base + PLLCTL);
 
 		udelay(PLL_BYPASS_TIME);
 
 		/* Powerdown CPU PLL */
-		val = __raw_readl(pdata->cpupll_reg_base + PLLCTL);
+		val = __raw_readl(pm_config.cpupll_reg_base + PLLCTL);
 		val |= PLLCTL_PLLPWRDN;
-		__raw_writel(val, pdata->cpupll_reg_base + PLLCTL);
+		__raw_writel(val, pm_config.cpupll_reg_base + PLLCTL);
 	}
 
 	/* Configure sleep count in deep sleep register */
-	val = __raw_readl(pdata->deepsleep_reg);
+	val = __raw_readl(pm_config.deepsleep_reg);
 	val &= ~DEEPSLEEP_SLEEPCOUNT_MASK,
-	val |= pdata->sleepcount;
-	__raw_writel(val, pdata->deepsleep_reg);
+	val |= pm_config.sleepcount;
+	__raw_writel(val, pm_config.deepsleep_reg);
 
 	/* System goes to sleep in this call */
-	davinci_sram_suspend(pdata);
+	davinci_sram_suspend(&pm_config);
 
-	if (pdata->cpupll_reg_base != pdata->ddrpll_reg_base) {
+	if (pm_config.cpupll_reg_base != pm_config.ddrpll_reg_base) {
 
 		/* put CPU PLL in reset */
-		val = __raw_readl(pdata->cpupll_reg_base + PLLCTL);
+		val = __raw_readl(pm_config.cpupll_reg_base + PLLCTL);
 		val &= ~PLLCTL_PLLRST;
-		__raw_writel(val, pdata->cpupll_reg_base + PLLCTL);
+		__raw_writel(val, pm_config.cpupll_reg_base + PLLCTL);
 
 		/* put CPU PLL in power down */
-		val = __raw_readl(pdata->cpupll_reg_base + PLLCTL);
+		val = __raw_readl(pm_config.cpupll_reg_base + PLLCTL);
 		val &= ~PLLCTL_PLLPWRDN;
-		__raw_writel(val, pdata->cpupll_reg_base + PLLCTL);
+		__raw_writel(val, pm_config.cpupll_reg_base + PLLCTL);
 
 		/* wait for CPU PLL reset */
 		udelay(PLL_RESET_TIME);
 
 		/* bring CPU PLL out of reset */
-		val = __raw_readl(pdata->cpupll_reg_base + PLLCTL);
+		val = __raw_readl(pm_config.cpupll_reg_base + PLLCTL);
 		val |= PLLCTL_PLLRST;
-		__raw_writel(val, pdata->cpupll_reg_base + PLLCTL);
+		__raw_writel(val, pm_config.cpupll_reg_base + PLLCTL);
 
 		/* Wait for CPU PLL to lock */
 		udelay(PLL_LOCK_TIME);
 
 		/* Remove CPU PLL from bypass mode */
-		val = __raw_readl(pdata->cpupll_reg_base + PLLCTL);
+		val = __raw_readl(pm_config.cpupll_reg_base + PLLCTL);
 		val &= ~PLLCTL_PLLENSRC;
 		val |= PLLCTL_PLLEN;
-		__raw_writel(val, pdata->cpupll_reg_base + PLLCTL);
+		__raw_writel(val, pm_config.cpupll_reg_base + PLLCTL);
 	}
 }
 
@@ -117,17 +124,36 @@ static const struct platform_suspend_ops davinci_pm_ops = {
 	.valid		= suspend_valid_only_mem,
 };
 
-static int __init davinci_pm_probe(struct platform_device *pdev)
+int __init davinci_pm_init(void)
 {
-	pdata = pdev->dev.platform_data;
-	if (!pdata) {
-		dev_err(&pdev->dev, "cannot get platform data\n");
-		return -ENOENT;
+	int ret;
+
+	ret = davinci_cfg_reg(DA850_RTC_ALARM);
+	if (ret)
+		return ret;
+
+	pm_config.ddr2_ctlr_base = da8xx_get_mem_ctlr();
+	pm_config.deepsleep_reg = DA8XX_SYSCFG1_VIRT(DA8XX_DEEPSLEEP_REG);
+
+	pm_config.cpupll_reg_base = ioremap(DA8XX_PLL0_BASE, SZ_4K);
+	if (!pm_config.cpupll_reg_base)
+		return -ENOMEM;
+
+	pm_config.ddrpll_reg_base = ioremap(DA850_PLL1_BASE, SZ_4K);
+	if (!pm_config.ddrpll_reg_base) {
+		ret = -ENOMEM;
+		goto no_ddrpll_mem;
+	}
+
+	pm_config.ddrpsc_reg_base = ioremap(DA8XX_PSC1_BASE, SZ_4K);
+	if (!pm_config.ddrpsc_reg_base) {
+		ret = -ENOMEM;
+		goto no_ddrpsc_mem;
 	}
 
 	davinci_sram_suspend = sram_alloc(davinci_cpu_suspend_sz, NULL);
 	if (!davinci_sram_suspend) {
-		dev_err(&pdev->dev, "cannot allocate SRAM memory\n");
+		pr_err("PM: cannot allocate SRAM memory\n");
 		return -ENOMEM;
 	}
 
@@ -136,23 +162,9 @@ static int __init davinci_pm_probe(struct platform_device *pdev)
 
 	suspend_set_ops(&davinci_pm_ops);
 
-	return 0;
-}
-
-static int __exit davinci_pm_remove(struct platform_device *pdev)
-{
-	sram_free(davinci_sram_suspend, davinci_cpu_suspend_sz);
-	return 0;
-}
-
-static struct platform_driver davinci_pm_driver = {
-	.driver = {
-		.name	 = "pm-davinci",
-	},
-	.remove = __exit_p(davinci_pm_remove),
-};
-
-int __init davinci_pm_init(void)
-{
-	return platform_driver_probe(&davinci_pm_driver, davinci_pm_probe);
+no_ddrpsc_mem:
+	iounmap(pm_config.ddrpll_reg_base);
+no_ddrpll_mem:
+	iounmap(pm_config.cpupll_reg_base);
+	return ret;
 }

arch/arm/mach-davinci/usb-da8xx.c

@@ -1,21 +1,44 @@
 /*
  * DA8xx USB
  */
+#include <linux/clk.h>
+#include <linux/delay.h>
 #include <linux/dma-mapping.h>
 #include <linux/init.h>
+#include <linux/mfd/da8xx-cfgchip.h>
+#include <linux/phy/phy.h>
 #include <linux/platform_data/usb-davinci.h>
 #include <linux/platform_device.h>
 #include <linux/usb/musb.h>
 
+#include <mach/clock.h>
 #include <mach/common.h>
 #include <mach/cputype.h>
 #include <mach/da8xx.h>
 #include <mach/irqs.h>
 
+#include "clock.h"
+
 #define DA8XX_USB0_BASE		0x01e00000
 #define DA8XX_USB1_BASE		0x01e25000
 
-#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
+static struct platform_device da8xx_usb_phy = {
+	.name		= "da8xx-usb-phy",
+	.id		= -1,
+	.dev		= {
+		/*
+		 * Setting init_name so that clock lookup will work in
+		 * da8xx_register_usb11_phy_clk() even if this device is not
+		 * registered yet.
+		 */
+		.init_name	= "da8xx-usb-phy",
+	},
+};
+
+int __init da8xx_register_usb_phy(void)
+{
+	return platform_device_register(&da8xx_usb_phy);
+}
 
 static struct musb_hdrc_config musb_config = {
 	.multipoint	= true,
@@ -45,10 +68,15 @@ static struct resource da8xx_usb20_resources[] = {
 
 static u64 usb_dmamask = DMA_BIT_MASK(32);
 
-static struct platform_device usb_dev = {
+static struct platform_device da8xx_usb20_dev = {
 	.name		= "musb-da8xx",
 	.id             = -1,
 	.dev = {
+		/*
+		 * Setting init_name so that clock lookup will work in
+		 * usb20_phy_clk_enable() even if this device is not registered.
+		 */
+		.init_name		= "musb-da8xx",
 		.platform_data		= &usb_data,
 		.dma_mask		= &usb_dmamask,
 		.coherent_dma_mask      = DMA_BIT_MASK(32),
@@ -62,18 +90,9 @@ int __init da8xx_register_usb20(unsigned int mA, unsigned int potpgt)
 	usb_data.power	= mA > 510 ? 255 : mA / 2;
 	usb_data.potpgt = (potpgt + 1) / 2;
 
-	return platform_device_register(&usb_dev);
-}
-
-#else
-
-int __init da8xx_register_usb20(unsigned int mA, unsigned int potpgt)
-{
-	return 0;
+	return platform_device_register(&da8xx_usb20_dev);
 }
 
-#endif  /* CONFIG_USB_MUSB_HDRC */
-
 static struct resource da8xx_usb11_resources[] = {
 	[0] = {
 		.start	= DA8XX_USB1_BASE,
@@ -90,8 +109,8 @@ static struct resource da8xx_usb11_resources[] = {
 static u64 da8xx_usb11_dma_mask = DMA_BIT_MASK(32);
 
 static struct platform_device da8xx_usb11_device = {
-	.name		= "ohci",
-	.id		= 0,
+	.name		= "ohci-da8xx",
+	.id		= -1,
 	.dev = {
 		.dma_mask		= &da8xx_usb11_dma_mask,
 		.coherent_dma_mask	= DMA_BIT_MASK(32),
@@ -105,3 +124,236 @@ int __init da8xx_register_usb11(struct da8xx_ohci_root_hub *pdata)
 	da8xx_usb11_device.dev.platform_data = pdata;
 	return platform_device_register(&da8xx_usb11_device);
 }
+
+static struct clk usb_refclkin = {
+	.name		= "usb_refclkin",
+	.set_rate	= davinci_simple_set_rate,
+};
+
+static struct clk_lookup usb_refclkin_lookup =
+	CLK(NULL, "usb_refclkin", &usb_refclkin);
+
+/**
+ * da8xx_register_usb_refclkin - register USB_REFCLKIN clock
+ *
+ * @rate: The clock rate in Hz
+ *
+ * This clock is only needed if the board provides an external USB_REFCLKIN
+ * signal, in which case it will be used as the parent of usb20_phy_clk and/or
+ * usb11_phy_clk.
+ */
+int __init da8xx_register_usb_refclkin(int rate)
+{
+	int ret;
+
+	usb_refclkin.rate = rate;
+	ret = clk_register(&usb_refclkin);
+	if (ret)
+		return ret;
+
+	clkdev_add(&usb_refclkin_lookup);
+
+	return 0;
+}
+
+static void usb20_phy_clk_enable(struct clk *clk)
+{
+	struct clk *usb20_clk;
+	int err;
+	u32 val;
+	u32 timeout = 500000; /* 500 msec */
+
+	val = readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG));
+
+	usb20_clk = clk_get(&da8xx_usb20_dev.dev, "usb20");
+	if (IS_ERR(usb20_clk)) {
+		pr_err("could not get usb20 clk: %ld\n", PTR_ERR(usb20_clk));
+		return;
+	}
+
+	/* The USB 2.O PLL requires that the USB 2.O PSC is enabled as well. */
+	err = clk_prepare_enable(usb20_clk);
+	if (err) {
+		pr_err("failed to enable usb20 clk: %d\n", err);
+		clk_put(usb20_clk);
+		return;
+	}
+
+	/*
+	 * Turn on the USB 2.0 PHY, but just the PLL, and not OTG. The USB 1.1
+	 * host may use the PLL clock without USB 2.0 OTG being used.
+	 */
+	val &= ~(CFGCHIP2_RESET | CFGCHIP2_PHYPWRDN);
+	val |= CFGCHIP2_PHY_PLLON;
+
+	writel(val, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG));
+
+	while (--timeout) {
+		val = readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG));
+		if (val & CFGCHIP2_PHYCLKGD)
+			goto done;
+		udelay(1);
+	}
+
+	pr_err("Timeout waiting for USB 2.0 PHY clock good\n");
+done:
+	clk_disable_unprepare(usb20_clk);
+	clk_put(usb20_clk);
+}
+
+static void usb20_phy_clk_disable(struct clk *clk)
+{
+	u32 val;
+
+	val = readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG));
+	val |= CFGCHIP2_PHYPWRDN;
+	writel(val, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG));
+}
+
+static int usb20_phy_clk_set_parent(struct clk *clk, struct clk *parent)
+{
+	u32 val;
+
+	val = readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG));
+
+	/* Set the mux depending on the parent clock. */
+	if (parent == &usb_refclkin) {
+		val &= ~CFGCHIP2_USB2PHYCLKMUX;
+	} else if (strcmp(parent->name, "pll0_aux_clk") == 0) {
+		val |= CFGCHIP2_USB2PHYCLKMUX;
+	} else {
+		pr_err("Bad parent on USB 2.0 PHY clock\n");
+		return -EINVAL;
+	}
+
+	/* reference frequency also comes from parent clock */
+	val &= ~CFGCHIP2_REFFREQ_MASK;
+	switch (clk_get_rate(parent)) {
+	case 12000000:
+		val |= CFGCHIP2_REFFREQ_12MHZ;
+		break;
+	case 13000000:
+		val |= CFGCHIP2_REFFREQ_13MHZ;
+		break;
+	case 19200000:
+		val |= CFGCHIP2_REFFREQ_19_2MHZ;
+		break;
+	case 20000000:
+		val |= CFGCHIP2_REFFREQ_20MHZ;
+		break;
+	case 24000000:
+		val |= CFGCHIP2_REFFREQ_24MHZ;
+		break;
+	case 26000000:
+		val |= CFGCHIP2_REFFREQ_26MHZ;
+		break;
+	case 38400000:
+		val |= CFGCHIP2_REFFREQ_38_4MHZ;
+		break;
+	case 40000000:
+		val |= CFGCHIP2_REFFREQ_40MHZ;
+		break;
+	case 48000000:
+		val |= CFGCHIP2_REFFREQ_48MHZ;
+		break;
+	default:
+		pr_err("Bad parent clock rate on USB 2.0 PHY clock\n");
+		return -EINVAL;
+	}
+
+	writel(val, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG));
+
+	return 0;
+}
+
+static struct clk usb20_phy_clk = {
+	.name		= "usb20_phy",
+	.clk_enable	= usb20_phy_clk_enable,
+	.clk_disable	= usb20_phy_clk_disable,
+	.set_parent	= usb20_phy_clk_set_parent,
+};
+
+static struct clk_lookup usb20_phy_clk_lookup =
+	CLK("da8xx-usb-phy", "usb20_phy", &usb20_phy_clk);
+
+/**
+ * da8xx_register_usb20_phy_clk - register USB0PHYCLKMUX clock
+ *
+ * @use_usb_refclkin: Selects the parent clock - either "usb_refclkin" if true
+ *	or "pll0_aux" if false.
+ */
+int __init da8xx_register_usb20_phy_clk(bool use_usb_refclkin)
+{
+	struct clk *parent;
+	int ret = 0;
+
+	parent = clk_get(NULL, use_usb_refclkin ? "usb_refclkin" : "pll0_aux");
+	if (IS_ERR(parent))
+		return PTR_ERR(parent);
+
+	usb20_phy_clk.parent = parent;
+	ret = clk_register(&usb20_phy_clk);
+	if (!ret)
+		clkdev_add(&usb20_phy_clk_lookup);
+
+	clk_put(parent);
+
+	return ret;
+}
+
+static int usb11_phy_clk_set_parent(struct clk *clk, struct clk *parent)
+{
+	u32 val;
+
+	val = readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG));
+
+	/* Set the USB 1.1 PHY clock mux based on the parent clock. */
+	if (parent == &usb20_phy_clk) {
+		val &= ~CFGCHIP2_USB1PHYCLKMUX;
+	} else if (parent == &usb_refclkin) {
+		val |= CFGCHIP2_USB1PHYCLKMUX;
+	} else {
+		pr_err("Bad parent on USB 1.1 PHY clock\n");
+		return -EINVAL;
+	}
+
+	writel(val, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG));
+
+	return 0;
+}
+
+static struct clk usb11_phy_clk = {
+	.name		= "usb11_phy",
+	.set_parent	= usb11_phy_clk_set_parent,
+};
+
+static struct clk_lookup usb11_phy_clk_lookup =
+	CLK("da8xx-usb-phy", "usb11_phy", &usb11_phy_clk);
+
+/**
+ * da8xx_register_usb11_phy_clk - register USB1PHYCLKMUX clock
+ *
+ * @use_usb_refclkin: Selects the parent clock - either "usb_refclkin" if true
+ *	or "usb20_phy" if false.
+ */
+int __init da8xx_register_usb11_phy_clk(bool use_usb_refclkin)
+{
+	struct clk *parent;
+	int ret = 0;
+
+	if (use_usb_refclkin)
+		parent = clk_get(NULL, "usb_refclkin");
+	else
+		parent = clk_get(&da8xx_usb_phy.dev, "usb20_phy");
+	if (IS_ERR(parent))
+		return PTR_ERR(parent);
+
+	usb11_phy_clk.parent = parent;
+	ret = clk_register(&usb11_phy_clk);
+	if (!ret)
+		clkdev_add(&usb11_phy_clk_lookup);
+
+	clk_put(parent);
+
+	return ret;
+}

arch/arm/mach-imx/Kconfig

@@ -557,7 +557,6 @@ config SOC_VF610
 	bool "Vybrid Family VF610 support"
 	select ARM_GIC if ARCH_MULTI_V7
 	select PINCTRL_VF610
-	select PL310_ERRATA_769419 if CACHE_L2X0
 
 	help
 	  This enables support for Freescale Vybrid VF610 processor.

arch/arm/mach-imx/mach-imx6ul.c

@@ -89,6 +89,7 @@ static void __init imx6ul_init_late(void)
 
 static const char * const imx6ul_dt_compat[] __initconst = {
 	"fsl,imx6ul",
+	"fsl,imx6ull",
 	NULL,
 };
 

arch/arm/mach-imx/mmdc.c

@@ -1,5 +1,5 @@
 /*
- * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011,2016 Freescale Semiconductor, Inc.
  * Copyright 2011 Linaro Ltd.
  *
  * The code contained herein is licensed under the GNU General Public
@@ -10,12 +10,16 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
+#include <linux/hrtimer.h>
 #include <linux/init.h>
+#include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_device.h>
+#include <linux/perf_event.h>
+#include <linux/slab.h>
 
 #include "common.h"
 
@@ -27,8 +31,489 @@
 #define BM_MMDC_MDMISC_DDR_TYPE	0x18
 #define BP_MMDC_MDMISC_DDR_TYPE	0x3
 
+#define TOTAL_CYCLES		0x0
+#define BUSY_CYCLES		0x1
+#define READ_ACCESSES		0x2
+#define WRITE_ACCESSES		0x3
+#define READ_BYTES		0x4
+#define WRITE_BYTES		0x5
+
+/* Enables, resets, freezes, overflow profiling*/
+#define DBG_DIS			0x0
+#define DBG_EN			0x1
+#define DBG_RST			0x2
+#define PRF_FRZ			0x4
+#define CYC_OVF			0x8
+#define PROFILE_SEL		0x10
+
+#define MMDC_MADPCR0	0x410
+#define MMDC_MADPSR0	0x418
+#define MMDC_MADPSR1	0x41C
+#define MMDC_MADPSR2	0x420
+#define MMDC_MADPSR3	0x424
+#define MMDC_MADPSR4	0x428
+#define MMDC_MADPSR5	0x42C
+
+#define MMDC_NUM_COUNTERS	6
+
+#define MMDC_FLAG_PROFILE_SEL	0x1
+
+#define to_mmdc_pmu(p) container_of(p, struct mmdc_pmu, pmu)
+
 static int ddr_type;
 
+struct fsl_mmdc_devtype_data {
+	unsigned int flags;
+};
+
+static const struct fsl_mmdc_devtype_data imx6q_data = {
+};
+
+static const struct fsl_mmdc_devtype_data imx6qp_data = {
+	.flags = MMDC_FLAG_PROFILE_SEL,
+};
+
+static const struct of_device_id imx_mmdc_dt_ids[] = {
+	{ .compatible = "fsl,imx6q-mmdc", .data = (void *)&imx6q_data},
+	{ .compatible = "fsl,imx6qp-mmdc", .data = (void *)&imx6qp_data},
+	{ /* sentinel */ }
+};
+
+#ifdef CONFIG_PERF_EVENTS
+
+static DEFINE_IDA(mmdc_ida);
+
+PMU_EVENT_ATTR_STRING(total-cycles, mmdc_pmu_total_cycles, "event=0x00")
+PMU_EVENT_ATTR_STRING(busy-cycles, mmdc_pmu_busy_cycles, "event=0x01")
+PMU_EVENT_ATTR_STRING(read-accesses, mmdc_pmu_read_accesses, "event=0x02")
+PMU_EVENT_ATTR_STRING(write-accesses, mmdc_pmu_write_accesses, "config=0x03")
+PMU_EVENT_ATTR_STRING(read-bytes, mmdc_pmu_read_bytes, "event=0x04")
+PMU_EVENT_ATTR_STRING(read-bytes.unit, mmdc_pmu_read_bytes_unit, "MB");
+PMU_EVENT_ATTR_STRING(read-bytes.scale, mmdc_pmu_read_bytes_scale, "0.000001");
+PMU_EVENT_ATTR_STRING(write-bytes, mmdc_pmu_write_bytes, "event=0x05")
+PMU_EVENT_ATTR_STRING(write-bytes.unit, mmdc_pmu_write_bytes_unit, "MB");
+PMU_EVENT_ATTR_STRING(write-bytes.scale, mmdc_pmu_write_bytes_scale, "0.000001");
+
+struct mmdc_pmu {
+	struct pmu pmu;
+	void __iomem *mmdc_base;
+	cpumask_t cpu;
+	struct hrtimer hrtimer;
+	unsigned int active_events;
+	struct device *dev;
+	struct perf_event *mmdc_events[MMDC_NUM_COUNTERS];
+	struct hlist_node node;
+	struct fsl_mmdc_devtype_data *devtype_data;
+};
+
+/*
+ * Polling period is set to one second, overflow of total-cycles (the fastest
+ * increasing counter) takes ten seconds so one second is safe
+ */
+static unsigned int mmdc_pmu_poll_period_us = 1000000;
+
+module_param_named(pmu_pmu_poll_period_us, mmdc_pmu_poll_period_us, uint,
+		S_IRUGO | S_IWUSR);
+
+static ktime_t mmdc_pmu_timer_period(void)
+{
+	return ns_to_ktime((u64)mmdc_pmu_poll_period_us * 1000);
+}
+
+static ssize_t mmdc_pmu_cpumask_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct mmdc_pmu *pmu_mmdc = dev_get_drvdata(dev);
+
+	return cpumap_print_to_pagebuf(true, buf, &pmu_mmdc->cpu);
+}
+
+static struct device_attribute mmdc_pmu_cpumask_attr =
+	__ATTR(cpumask, S_IRUGO, mmdc_pmu_cpumask_show, NULL);
+
+static struct attribute *mmdc_pmu_cpumask_attrs[] = {
+	&mmdc_pmu_cpumask_attr.attr,
+	NULL,
+};
+
+static struct attribute_group mmdc_pmu_cpumask_attr_group = {
+	.attrs = mmdc_pmu_cpumask_attrs,
+};
+
+static struct attribute *mmdc_pmu_events_attrs[] = {
+	&mmdc_pmu_total_cycles.attr.attr,
+	&mmdc_pmu_busy_cycles.attr.attr,
+	&mmdc_pmu_read_accesses.attr.attr,
+	&mmdc_pmu_write_accesses.attr.attr,
+	&mmdc_pmu_read_bytes.attr.attr,
+	&mmdc_pmu_read_bytes_unit.attr.attr,
+	&mmdc_pmu_read_bytes_scale.attr.attr,
+	&mmdc_pmu_write_bytes.attr.attr,
+	&mmdc_pmu_write_bytes_unit.attr.attr,
+	&mmdc_pmu_write_bytes_scale.attr.attr,
+	NULL,
+};
+
+static struct attribute_group mmdc_pmu_events_attr_group = {
+	.name = "events",
+	.attrs = mmdc_pmu_events_attrs,
+};
+
+PMU_FORMAT_ATTR(event, "config:0-63");
+static struct attribute *mmdc_pmu_format_attrs[] = {
+	&format_attr_event.attr,
+	NULL,
+};
+
+static struct attribute_group mmdc_pmu_format_attr_group = {
+	.name = "format",
+	.attrs = mmdc_pmu_format_attrs,
+};
+
+static const struct attribute_group *attr_groups[] = {
+	&mmdc_pmu_events_attr_group,
+	&mmdc_pmu_format_attr_group,
+	&mmdc_pmu_cpumask_attr_group,
+	NULL,
+};
+
+static u32 mmdc_pmu_read_counter(struct mmdc_pmu *pmu_mmdc, int cfg)
+{
+	void __iomem *mmdc_base, *reg;
+
+	mmdc_base = pmu_mmdc->mmdc_base;
+
+	switch (cfg) {
+	case TOTAL_CYCLES:
+		reg = mmdc_base + MMDC_MADPSR0;
+		break;
+	case BUSY_CYCLES:
+		reg = mmdc_base + MMDC_MADPSR1;
+		break;
+	case READ_ACCESSES:
+		reg = mmdc_base + MMDC_MADPSR2;
+		break;
+	case WRITE_ACCESSES:
+		reg = mmdc_base + MMDC_MADPSR3;
+		break;
+	case READ_BYTES:
+		reg = mmdc_base + MMDC_MADPSR4;
+		break;
+	case WRITE_BYTES:
+		reg = mmdc_base + MMDC_MADPSR5;
+		break;
+	default:
+		return WARN_ONCE(1,
+			"invalid configuration %d for mmdc counter", cfg);
+	}
+	return readl(reg);
+}
+
+static int mmdc_pmu_offline_cpu(unsigned int cpu, struct hlist_node *node)
+{
+	struct mmdc_pmu *pmu_mmdc = hlist_entry_safe(node, struct mmdc_pmu, node);
+	int target;
+
+	if (!cpumask_test_and_clear_cpu(cpu, &pmu_mmdc->cpu))
+		return 0;
+
+	target = cpumask_any_but(cpu_online_mask, cpu);
+	if (target >= nr_cpu_ids)
+		return 0;
+
+	perf_pmu_migrate_context(&pmu_mmdc->pmu, cpu, target);
+	cpumask_set_cpu(target, &pmu_mmdc->cpu);
+
+	return 0;
+}
+
+static bool mmdc_pmu_group_event_is_valid(struct perf_event *event,
+					  struct pmu *pmu,
+					  unsigned long *used_counters)
+{
+	int cfg = event->attr.config;
+
+	if (is_software_event(event))
+		return true;
+
+	if (event->pmu != pmu)
+		return false;
+
+	return !test_and_set_bit(cfg, used_counters);
+}
+
+/*
+ * Each event has a single fixed-purpose counter, so we can only have a
+ * single active event for each at any point in time. Here we just check
+ * for duplicates, and rely on mmdc_pmu_event_init to verify that the HW
+ * event numbers are valid.
+ */
+static bool mmdc_pmu_group_is_valid(struct perf_event *event)
+{
+	struct pmu *pmu = event->pmu;
+	struct perf_event *leader = event->group_leader;
+	struct perf_event *sibling;
+	unsigned long counter_mask = 0;
+
+	set_bit(leader->attr.config, &counter_mask);
+
+	if (event != leader) {
+		if (!mmdc_pmu_group_event_is_valid(event, pmu, &counter_mask))
+			return false;
+	}
+
+	list_for_each_entry(sibling, &leader->sibling_list, group_entry) {
+		if (!mmdc_pmu_group_event_is_valid(sibling, pmu, &counter_mask))
+			return false;
+	}
+
+	return true;
+}
+
+static int mmdc_pmu_event_init(struct perf_event *event)
+{
+	struct mmdc_pmu *pmu_mmdc = to_mmdc_pmu(event->pmu);
+	int cfg = event->attr.config;
+
+	if (event->attr.type != event->pmu->type)
+		return -ENOENT;
+
+	if (is_sampling_event(event) || event->attach_state & PERF_ATTACH_TASK)
+		return -EOPNOTSUPP;
+
+	if (event->cpu < 0) {
+		dev_warn(pmu_mmdc->dev, "Can't provide per-task data!\n");
+		return -EOPNOTSUPP;
+	}
+
+	if (event->attr.exclude_user		||
+			event->attr.exclude_kernel	||
+			event->attr.exclude_hv		||
+			event->attr.exclude_idle	||
+			event->attr.exclude_host	||
+			event->attr.exclude_guest	||
+			event->attr.sample_period)
+		return -EINVAL;
+
+	if (cfg < 0 || cfg >= MMDC_NUM_COUNTERS)
+		return -EINVAL;
+
+	if (!mmdc_pmu_group_is_valid(event))
+		return -EINVAL;
+
+	event->cpu = cpumask_first(&pmu_mmdc->cpu);
+	return 0;
+}
+
+static void mmdc_pmu_event_update(struct perf_event *event)
+{
+	struct mmdc_pmu *pmu_mmdc = to_mmdc_pmu(event->pmu);
+	struct hw_perf_event *hwc = &event->hw;
+	u64 delta, prev_raw_count, new_raw_count;
+
+	do {
+		prev_raw_count = local64_read(&hwc->prev_count);
+		new_raw_count = mmdc_pmu_read_counter(pmu_mmdc,
+						      event->attr.config);
+	} while (local64_cmpxchg(&hwc->prev_count, prev_raw_count,
+		new_raw_count) != prev_raw_count);
+
+	delta = (new_raw_count - prev_raw_count) & 0xFFFFFFFF;
+
+	local64_add(delta, &event->count);
+}
+
+static void mmdc_pmu_event_start(struct perf_event *event, int flags)
+{
+	struct mmdc_pmu *pmu_mmdc = to_mmdc_pmu(event->pmu);
+	struct hw_perf_event *hwc = &event->hw;
+	void __iomem *mmdc_base, *reg;
+	u32 val;
+
+	mmdc_base = pmu_mmdc->mmdc_base;
+	reg = mmdc_base + MMDC_MADPCR0;
+
+	/*
+	 * hrtimer is required because mmdc does not provide an interrupt so
+	 * polling is necessary
+	 */
+	hrtimer_start(&pmu_mmdc->hrtimer, mmdc_pmu_timer_period(),
+			HRTIMER_MODE_REL_PINNED);
+
+	local64_set(&hwc->prev_count, 0);
+
+	writel(DBG_RST, reg);
+
+	val = DBG_EN;
+	if (pmu_mmdc->devtype_data->flags & MMDC_FLAG_PROFILE_SEL)
+		val |= PROFILE_SEL;
+
+	writel(val, reg);
+}
+
+static int mmdc_pmu_event_add(struct perf_event *event, int flags)
+{
+	struct mmdc_pmu *pmu_mmdc = to_mmdc_pmu(event->pmu);
+	struct hw_perf_event *hwc = &event->hw;
+
+	int cfg = event->attr.config;
+
+	if (flags & PERF_EF_START)
+		mmdc_pmu_event_start(event, flags);
+
+	if (pmu_mmdc->mmdc_events[cfg] != NULL)
+		return -EAGAIN;
+
+	pmu_mmdc->mmdc_events[cfg] = event;
+	pmu_mmdc->active_events++;
+
+	local64_set(&hwc->prev_count, mmdc_pmu_read_counter(pmu_mmdc, cfg));
+
+	return 0;
+}
+
+static void mmdc_pmu_event_stop(struct perf_event *event, int flags)
+{
+	struct mmdc_pmu *pmu_mmdc = to_mmdc_pmu(event->pmu);
+	void __iomem *mmdc_base, *reg;
+
+	mmdc_base = pmu_mmdc->mmdc_base;
+	reg = mmdc_base + MMDC_MADPCR0;
+
+	writel(PRF_FRZ, reg);
+	mmdc_pmu_event_update(event);
+}
+
+static void mmdc_pmu_event_del(struct perf_event *event, int flags)
+{
+	struct mmdc_pmu *pmu_mmdc = to_mmdc_pmu(event->pmu);
+	int cfg = event->attr.config;
+
+	pmu_mmdc->mmdc_events[cfg] = NULL;
+	pmu_mmdc->active_events--;
+
+	if (pmu_mmdc->active_events == 0)
+		hrtimer_cancel(&pmu_mmdc->hrtimer);
+
+	mmdc_pmu_event_stop(event, PERF_EF_UPDATE);
+}
+
+static void mmdc_pmu_overflow_handler(struct mmdc_pmu *pmu_mmdc)
+{
+	int i;
+
+	for (i = 0; i < MMDC_NUM_COUNTERS; i++) {
+		struct perf_event *event = pmu_mmdc->mmdc_events[i];
+
+		if (event)
+			mmdc_pmu_event_update(event);
+	}
+}
+
+static enum hrtimer_restart mmdc_pmu_timer_handler(struct hrtimer *hrtimer)
+{
+	struct mmdc_pmu *pmu_mmdc = container_of(hrtimer, struct mmdc_pmu,
+			hrtimer);
+
+	mmdc_pmu_overflow_handler(pmu_mmdc);
+	hrtimer_forward_now(hrtimer, mmdc_pmu_timer_period());
+
+	return HRTIMER_RESTART;
+}
+
+static int mmdc_pmu_init(struct mmdc_pmu *pmu_mmdc,
+		void __iomem *mmdc_base, struct device *dev)
+{
+	int mmdc_num;
+
+	*pmu_mmdc = (struct mmdc_pmu) {
+		.pmu = (struct pmu) {
+			.task_ctx_nr    = perf_invalid_context,
+			.attr_groups    = attr_groups,
+			.event_init     = mmdc_pmu_event_init,
+			.add            = mmdc_pmu_event_add,
+			.del            = mmdc_pmu_event_del,
+			.start          = mmdc_pmu_event_start,
+			.stop           = mmdc_pmu_event_stop,
+			.read           = mmdc_pmu_event_update,
+		},
+		.mmdc_base = mmdc_base,
+		.dev = dev,
+		.active_events = 0,
+	};
+
+	mmdc_num = ida_simple_get(&mmdc_ida, 0, 0, GFP_KERNEL);
+
+	return mmdc_num;
+}
+
+static int imx_mmdc_remove(struct platform_device *pdev)
+{
+	struct mmdc_pmu *pmu_mmdc = platform_get_drvdata(pdev);
+
+	perf_pmu_unregister(&pmu_mmdc->pmu);
+	cpuhp_remove_state_nocalls(CPUHP_ONLINE);
+	kfree(pmu_mmdc);
+	return 0;
+}
+
+static int imx_mmdc_perf_init(struct platform_device *pdev, void __iomem *mmdc_base)
+{
+	struct mmdc_pmu *pmu_mmdc;
+	char *name;
+	int mmdc_num;
+	int ret;
+	const struct of_device_id *of_id =
+		of_match_device(imx_mmdc_dt_ids, &pdev->dev);
+
+	pmu_mmdc = kzalloc(sizeof(*pmu_mmdc), GFP_KERNEL);
+	if (!pmu_mmdc) {
+		pr_err("failed to allocate PMU device!\n");
+		return -ENOMEM;
+	}
+
+	mmdc_num = mmdc_pmu_init(pmu_mmdc, mmdc_base, &pdev->dev);
+	if (mmdc_num == 0)
+		name = "mmdc";
+	else
+		name = devm_kasprintf(&pdev->dev,
+				GFP_KERNEL, "mmdc%d", mmdc_num);
+
+	pmu_mmdc->devtype_data = (struct fsl_mmdc_devtype_data *)of_id->data;
+
+	hrtimer_init(&pmu_mmdc->hrtimer, CLOCK_MONOTONIC,
+			HRTIMER_MODE_REL);
+	pmu_mmdc->hrtimer.function = mmdc_pmu_timer_handler;
+
+	cpuhp_state_add_instance_nocalls(CPUHP_ONLINE,
+					 &pmu_mmdc->node);
+	cpumask_set_cpu(smp_processor_id(), &pmu_mmdc->cpu);
+	ret = cpuhp_setup_state_multi(CPUHP_AP_NOTIFY_ONLINE,
+				      "MMDC_ONLINE", NULL,
+				      mmdc_pmu_offline_cpu);
+	if (ret) {
+		pr_err("cpuhp_setup_state_multi failure\n");
+		goto pmu_register_err;
+	}
+
+	ret = perf_pmu_register(&(pmu_mmdc->pmu), name, -1);
+	platform_set_drvdata(pdev, pmu_mmdc);
+	if (ret)
+		goto pmu_register_err;
+	return 0;
+
+pmu_register_err:
+	pr_warn("MMDC Perf PMU failed (%d), disabled\n", ret);
+	hrtimer_cancel(&pmu_mmdc->hrtimer);
+	kfree(pmu_mmdc);
+	return ret;
+}
+
+#else
+#define imx_mmdc_remove NULL
+#define imx_mmdc_perf_init(pdev, mmdc_base) 0
+#endif
+
 static int imx_mmdc_probe(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
@@ -62,7 +547,7 @@ static int imx_mmdc_probe(struct platform_device *pdev)
 		return -EBUSY;
 	}
 
-	return 0;
+	return imx_mmdc_perf_init(pdev, mmdc_base);
 }
 
 int imx_mmdc_get_ddr_type(void)
@@ -70,17 +555,13 @@ int imx_mmdc_get_ddr_type(void)
 	return ddr_type;
 }
 
-static const struct of_device_id imx_mmdc_dt_ids[] = {
-	{ .compatible = "fsl,imx6q-mmdc", },
-	{ /* sentinel */ }
-};
-
 static struct platform_driver imx_mmdc_driver = {
 	.driver		= {
 		.name	= "imx-mmdc",
 		.of_match_table = imx_mmdc_dt_ids,
 	},
 	.probe		= imx_mmdc_probe,
+	.remove		= imx_mmdc_remove,
 };
 
 static int __init imx_mmdc_init(void)

arch/arm/mach-integrator/integrator_ap.c

@@ -27,6 +27,8 @@
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
 #include <linux/termios.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -37,11 +39,8 @@
 #include "pci_v3.h"
 #include "lm.h"
 
-/* Base address to the AP system controller */
-void __iomem *ap_syscon_base;
-/* Base address to the external bus interface */
-static void __iomem *ebi_base;
-
+/* Regmap to the AP system controller */
+static struct regmap *ap_syscon_map;
 
 /*
  * All IO addresses are mapped onto VA 0xFFFx.xxxx, where x.xxxx
@@ -125,6 +124,7 @@ static void integrator_uart_set_mctrl(struct amba_device *dev,
 {
 	unsigned int ctrls = 0, ctrlc = 0, rts_mask, dtr_mask;
 	u32 phybase = dev->res.start;
+	int ret;
 
 	if (phybase == INTEGRATOR_UART0_BASE) {
 		/* UART0 */
@@ -146,8 +146,17 @@ static void integrator_uart_set_mctrl(struct amba_device *dev,
 	else
 		ctrls |= dtr_mask;
 
-	__raw_writel(ctrls, ap_syscon_base + INTEGRATOR_SC_CTRLS_OFFSET);
-	__raw_writel(ctrlc, ap_syscon_base + INTEGRATOR_SC_CTRLC_OFFSET);
+	ret = regmap_write(ap_syscon_map,
+			   INTEGRATOR_SC_CTRLS_OFFSET,
+			   ctrls);
+	if (ret)
+		pr_err("MODEM: unable to write PL010 UART CTRLS\n");
+
+	ret = regmap_write(ap_syscon_map,
+			   INTEGRATOR_SC_CTRLC_OFFSET,
+			   ctrlc);
+	if (ret)
+		pr_err("MODEM: unable to write PL010 UART CRTLC\n");
 }
 
 struct amba_pl010_data ap_uart_data = {
@@ -178,35 +187,32 @@ static const struct of_device_id ap_syscon_match[] = {
 	{ },
 };
 
-static const struct of_device_id ebi_match[] = {
-	{ .compatible = "arm,external-bus-interface"},
-	{ },
-};
-
 static void __init ap_init_of(void)
 {
-	unsigned long sc_dec;
+	u32 sc_dec;
 	struct device_node *syscon;
-	struct device_node *ebi;
+	int ret;
 	int i;
 
+	of_platform_default_populate(NULL, ap_auxdata_lookup, NULL);
+
 	syscon = of_find_matching_node(NULL, ap_syscon_match);
 	if (!syscon)
 		return;
-	ebi = of_find_matching_node(NULL, ebi_match);
-	if (!ebi)
+	ap_syscon_map = syscon_node_to_regmap(syscon);
+	if (IS_ERR(ap_syscon_map)) {
+		pr_crit("could not find Integrator/AP system controller\n");
 		return;
+	}
 
-	ap_syscon_base = of_iomap(syscon, 0);
-	if (!ap_syscon_base)
-		return;
-	ebi_base = of_iomap(ebi, 0);
-	if (!ebi_base)
+	ret = regmap_read(ap_syscon_map,
+			  INTEGRATOR_SC_DEC_OFFSET,
+			  &sc_dec);
+	if (ret) {
+		pr_crit("could not read from Integrator/AP syscon\n");
 		return;
+	}
 
-	of_platform_default_populate(NULL, ap_auxdata_lookup, NULL);
-
-	sc_dec = readl(ap_syscon_base + INTEGRATOR_SC_DEC_OFFSET);
 	for (i = 0; i < 4; i++) {
 		struct lm_device *lmdev;
 

arch/arm/mach-lpc32xx/clock.h

@@ -1,38 +0,0 @@
-/*
- * arch/arm/mach-lpc32xx/clock.h
- *
- * Author: Kevin Wells <kevin.wells@nxp.com>
- *
- * Copyright (C) 2010 NXP Semiconductors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __LPC32XX_CLOCK_H
-#define __LPC32XX_CLOCK_H
-
-struct clk {
-	struct list_head node;
-	struct clk *parent;
-	u32 rate;
-	u32 usecount;
-
-	int (*set_rate) (struct clk *, unsigned long);
-	unsigned long (*round_rate) (struct clk *, unsigned long);
-	unsigned long (*get_rate) (struct clk *clk);
-	int (*enable) (struct clk *, int);
-
-	/* Register address and bit mask for simple clocks */
-	void __iomem *enable_reg;
-	u32 enable_mask;
-};
-
-#endif

arch/arm/mach-lpc32xx/common.h

@@ -24,7 +24,6 @@
 /*
  * Other arch specific structures and functions
  */
-extern void __init lpc32xx_init_irq(void);
 extern void __init lpc32xx_map_io(void);
 extern void __init lpc32xx_serial_init(void);
 

arch/arm/mach-lpc32xx/include/mach/irqs.h

@@ -1,117 +0,0 @@
-/*
- * arch/arm/mach-lpc32xx/include/mach/irqs.h
- *
- * Author: Kevin Wells <kevin.wells@nxp.com>
- *
- * Copyright (C) 2010 NXP Semiconductors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARM_ARCH_IRQS_H
-#define __ASM_ARM_ARCH_IRQS_H
-
-#define LPC32XX_SIC1_IRQ(n)		(32 + (n))
-#define LPC32XX_SIC2_IRQ(n)		(64 + (n))
-
-/*
- * MIC interrupts
- */
-#define IRQ_LPC32XX_SUB1IRQ		0
-#define IRQ_LPC32XX_SUB2IRQ		1
-#define IRQ_LPC32XX_PWM3		3
-#define IRQ_LPC32XX_PWM4		4
-#define IRQ_LPC32XX_HSTIMER		5
-#define IRQ_LPC32XX_WATCH		6
-#define IRQ_LPC32XX_UART_IIR3		7
-#define IRQ_LPC32XX_UART_IIR4		8
-#define IRQ_LPC32XX_UART_IIR5		9
-#define IRQ_LPC32XX_UART_IIR6		10
-#define IRQ_LPC32XX_FLASH		11
-#define IRQ_LPC32XX_SD1			13
-#define IRQ_LPC32XX_LCD			14
-#define IRQ_LPC32XX_SD0			15
-#define IRQ_LPC32XX_TIMER0		16
-#define IRQ_LPC32XX_TIMER1		17
-#define IRQ_LPC32XX_TIMER2		18
-#define IRQ_LPC32XX_TIMER3		19
-#define IRQ_LPC32XX_SSP0		20
-#define IRQ_LPC32XX_SSP1		21
-#define IRQ_LPC32XX_I2S0		22
-#define IRQ_LPC32XX_I2S1		23
-#define IRQ_LPC32XX_UART_IIR7		24
-#define IRQ_LPC32XX_UART_IIR2		25
-#define IRQ_LPC32XX_UART_IIR1		26
-#define IRQ_LPC32XX_MSTIMER		27
-#define IRQ_LPC32XX_DMA			28
-#define IRQ_LPC32XX_ETHERNET		29
-#define IRQ_LPC32XX_SUB1FIQ		30
-#define IRQ_LPC32XX_SUB2FIQ		31
-
-/*
- * SIC1 interrupts start at offset 32
- */
-#define IRQ_LPC32XX_JTAG_COMM_TX	LPC32XX_SIC1_IRQ(1)
-#define IRQ_LPC32XX_JTAG_COMM_RX	LPC32XX_SIC1_IRQ(2)
-#define IRQ_LPC32XX_GPI_28		LPC32XX_SIC1_IRQ(4)
-#define IRQ_LPC32XX_TS_P		LPC32XX_SIC1_IRQ(6)
-#define IRQ_LPC32XX_TS_IRQ		LPC32XX_SIC1_IRQ(7)
-#define IRQ_LPC32XX_TS_AUX		LPC32XX_SIC1_IRQ(8)
-#define IRQ_LPC32XX_SPI2		LPC32XX_SIC1_IRQ(12)
-#define IRQ_LPC32XX_PLLUSB		LPC32XX_SIC1_IRQ(13)
-#define IRQ_LPC32XX_PLLHCLK		LPC32XX_SIC1_IRQ(14)
-#define IRQ_LPC32XX_PLL397		LPC32XX_SIC1_IRQ(17)
-#define IRQ_LPC32XX_I2C_2		LPC32XX_SIC1_IRQ(18)
-#define IRQ_LPC32XX_I2C_1		LPC32XX_SIC1_IRQ(19)
-#define IRQ_LPC32XX_RTC			LPC32XX_SIC1_IRQ(20)
-#define IRQ_LPC32XX_KEY			LPC32XX_SIC1_IRQ(22)
-#define IRQ_LPC32XX_SPI1		LPC32XX_SIC1_IRQ(23)
-#define IRQ_LPC32XX_SW			LPC32XX_SIC1_IRQ(24)
-#define IRQ_LPC32XX_USB_OTG_TIMER	LPC32XX_SIC1_IRQ(25)
-#define IRQ_LPC32XX_USB_OTG_ATX		LPC32XX_SIC1_IRQ(26)
-#define IRQ_LPC32XX_USB_HOST		LPC32XX_SIC1_IRQ(27)
-#define IRQ_LPC32XX_USB_DEV_DMA		LPC32XX_SIC1_IRQ(28)
-#define IRQ_LPC32XX_USB_DEV_LP		LPC32XX_SIC1_IRQ(29)
-#define IRQ_LPC32XX_USB_DEV_HP		LPC32XX_SIC1_IRQ(30)
-#define IRQ_LPC32XX_USB_I2C		LPC32XX_SIC1_IRQ(31)
-
-/*
- * SIC2 interrupts start at offset 64
- */
-#define IRQ_LPC32XX_GPIO_00		LPC32XX_SIC2_IRQ(0)
-#define IRQ_LPC32XX_GPIO_01		LPC32XX_SIC2_IRQ(1)
-#define IRQ_LPC32XX_GPIO_02		LPC32XX_SIC2_IRQ(2)
-#define IRQ_LPC32XX_GPIO_03		LPC32XX_SIC2_IRQ(3)
-#define IRQ_LPC32XX_GPIO_04		LPC32XX_SIC2_IRQ(4)
-#define IRQ_LPC32XX_GPIO_05		LPC32XX_SIC2_IRQ(5)
-#define IRQ_LPC32XX_SPI2_DATAIN		LPC32XX_SIC2_IRQ(6)
-#define IRQ_LPC32XX_U2_HCTS		LPC32XX_SIC2_IRQ(7)
-#define IRQ_LPC32XX_P0_P1_IRQ		LPC32XX_SIC2_IRQ(8)
-#define IRQ_LPC32XX_GPI_08		LPC32XX_SIC2_IRQ(9)
-#define IRQ_LPC32XX_GPI_09		LPC32XX_SIC2_IRQ(10)
-#define IRQ_LPC32XX_GPI_19		LPC32XX_SIC2_IRQ(11)
-#define IRQ_LPC32XX_U7_HCTS		LPC32XX_SIC2_IRQ(12)
-#define IRQ_LPC32XX_GPI_07		LPC32XX_SIC2_IRQ(15)
-#define IRQ_LPC32XX_SDIO		LPC32XX_SIC2_IRQ(18)
-#define IRQ_LPC32XX_U5_RX		LPC32XX_SIC2_IRQ(19)
-#define IRQ_LPC32XX_SPI1_DATAIN		LPC32XX_SIC2_IRQ(20)
-#define IRQ_LPC32XX_GPI_00		LPC32XX_SIC2_IRQ(22)
-#define IRQ_LPC32XX_GPI_01		LPC32XX_SIC2_IRQ(23)
-#define IRQ_LPC32XX_GPI_02		LPC32XX_SIC2_IRQ(24)
-#define IRQ_LPC32XX_GPI_03		LPC32XX_SIC2_IRQ(25)
-#define IRQ_LPC32XX_GPI_04		LPC32XX_SIC2_IRQ(26)
-#define IRQ_LPC32XX_GPI_05		LPC32XX_SIC2_IRQ(27)
-#define IRQ_LPC32XX_GPI_06		LPC32XX_SIC2_IRQ(28)
-#define IRQ_LPC32XX_SYSCLK		LPC32XX_SIC2_IRQ(31)
-
-#define LPC32XX_NR_IRQS			96
-
-#endif

arch/arm/mach-lpc32xx/pm.c

@@ -73,7 +73,6 @@
 #include <mach/hardware.h>
 #include <mach/platform.h>
 #include "common.h"
-#include "clock.h"
 
 #define TEMP_IRAM_AREA  IO_ADDRESS(LPC32XX_IRAM_BASE)
 

arch/arm/mach-mediatek/Makefile

@@ -1,4 +1,2 @@
-ifeq ($(CONFIG_SMP),y)
-obj-$(CONFIG_ARCH_MEDIATEK) += platsmp.o
-endif
-obj-$(CONFIG_ARCH_MEDIATEK) += mediatek.o
+obj-$(CONFIG_SMP)	+= platsmp.o
+obj-y			+= mediatek.o

arch/arm/mach-omap1/Kconfig

@@ -31,6 +31,32 @@ config ARCH_OMAP16XX
 	select ARCH_OMAP_OTG
 	select CPU_ARM926T
 
+config OMAP_MUX
+	bool "OMAP multiplexing support"
+	depends on ARCH_OMAP
+	default y
+	help
+	  Pin multiplexing support for OMAP boards. If your bootloader
+	  sets the multiplexing correctly, say N. Otherwise, or if unsure,
+	  say Y.
+
+config OMAP_MUX_DEBUG
+	bool "Multiplexing debug output"
+	depends on OMAP_MUX
+	help
+	  Makes the multiplexing functions print out a lot of debug info.
+	  This is useful if you want to find out the correct values of the
+	  multiplexing registers.
+
+config OMAP_MUX_WARNINGS
+	bool "Warn about pins the bootloader didn't set up"
+	depends on OMAP_MUX
+	default y
+	help
+	  Choose Y here to warn whenever driver initialization logic needs
+	  to change the pin multiplexing setup.	 When there are no warnings
+	  printed, it's safe to deselect OMAP_MUX for your product.
+
 comment "OMAP Board Type"
 	depends on ARCH_OMAP1
 

arch/arm/mach-omap1/i2c.c

@@ -19,6 +19,7 @@
  *
  */
 
+#include <linux/i2c.h>
 #include <linux/i2c-omap.h>
 #include <mach/mux.h>
 #include "soc.h"
@@ -91,6 +92,88 @@ int __init omap_i2c_add_bus(struct omap_i2c_bus_platform_data *pdata,
 	return platform_device_register(pdev);
 }
 
+#define OMAP_I2C_MAX_CONTROLLERS 4
+static struct omap_i2c_bus_platform_data i2c_pdata[OMAP_I2C_MAX_CONTROLLERS];
+
+#define OMAP_I2C_CMDLINE_SETUP	(BIT(31))
+
+/**
+ * omap_i2c_bus_setup - Process command line options for the I2C bus speed
+ * @str: String of options
+ *
+ * This function allow to override the default I2C bus speed for given I2C
+ * bus with a command line option.
+ *
+ * Format: i2c_bus=bus_id,clkrate (in kHz)
+ *
+ * Returns 1 on success, 0 otherwise.
+ */
+static int __init omap_i2c_bus_setup(char *str)
+{
+	int ints[3];
+
+	get_options(str, 3, ints);
+	if (ints[0] < 2 || ints[1] < 1 ||
+			ints[1] > OMAP_I2C_MAX_CONTROLLERS)
+		return 0;
+	i2c_pdata[ints[1] - 1].clkrate = ints[2];
+	i2c_pdata[ints[1] - 1].clkrate |= OMAP_I2C_CMDLINE_SETUP;
+
+	return 1;
+}
+__setup("i2c_bus=", omap_i2c_bus_setup);
+
+/*
+ * Register busses defined in command line but that are not registered with
+ * omap_register_i2c_bus from board initialization code.
+ */
+int __init omap_register_i2c_bus_cmdline(void)
+{
+	int i, err = 0;
+
+	for (i = 0; i < ARRAY_SIZE(i2c_pdata); i++)
+		if (i2c_pdata[i].clkrate & OMAP_I2C_CMDLINE_SETUP) {
+			i2c_pdata[i].clkrate &= ~OMAP_I2C_CMDLINE_SETUP;
+			err = omap_i2c_add_bus(&i2c_pdata[i], i + 1);
+			if (err)
+				goto out;
+		}
+
+out:
+	return err;
+}
+
+/**
+ * omap_register_i2c_bus - register I2C bus with device descriptors
+ * @bus_id: bus id counting from number 1
+ * @clkrate: clock rate of the bus in kHz
+ * @info: pointer into I2C device descriptor table or NULL
+ * @len: number of descriptors in the table
+ *
+ * Returns 0 on success or an error code.
+ */
+int __init omap_register_i2c_bus(int bus_id, u32 clkrate,
+			  struct i2c_board_info const *info,
+			  unsigned len)
+{
+	int err;
+
+	BUG_ON(bus_id < 1 || bus_id > OMAP_I2C_MAX_CONTROLLERS);
+
+	if (info) {
+		err = i2c_register_board_info(bus_id, info, len);
+		if (err)
+			return err;
+	}
+
+	if (!i2c_pdata[bus_id - 1].clkrate)
+		i2c_pdata[bus_id - 1].clkrate = clkrate;
+
+	i2c_pdata[bus_id - 1].clkrate &= ~OMAP_I2C_CMDLINE_SETUP;
+
+	return omap_i2c_add_bus(&i2c_pdata[bus_id - 1], bus_id);
+}
+
 static  int __init omap_i2c_cmdline(void)
 {
 	return omap_register_i2c_bus_cmdline();

arch/arm/mach-omap2/Makefile

@@ -6,7 +6,7 @@ ccflags-y := -I$(srctree)/$(src)/include \
 	-I$(srctree)/arch/arm/plat-omap/include
 
 # Common support
-obj-y := id.o io.o control.o mux.o devices.o fb.o serial.o timer.o pm.o \
+obj-y := id.o io.o control.o devices.o fb.o timer.o pm.o \
 	 common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o \
 	 omap_device.o omap-headsmp.o sram.o drm.o
 
@@ -63,9 +63,6 @@ obj-$(CONFIG_ARCH_OMAP4)		+= omap4-restart.o
 obj-$(CONFIG_SOC_OMAP5)			+= omap4-restart.o
 obj-$(CONFIG_SOC_DRA7XX)		+= omap4-restart.o
 
-# Pin multiplexing
-obj-$(CONFIG_ARCH_OMAP3)		+= mux34xx.o
-
 # SMS/SDRC
 obj-$(CONFIG_ARCH_OMAP2)		+= sdrc2xxx.o
 # obj-$(CONFIG_ARCH_OMAP3)		+= sdrc3xxx.o
@@ -80,7 +77,7 @@ endif
 # Power Management
 omap-4-5-pm-common			= omap-mpuss-lowpower.o
 obj-$(CONFIG_ARCH_OMAP4)		+= $(omap-4-5-pm-common)
-obj-$(CONFIG_ARCH_OMAP5)		+= $(omap-4-5-pm-common)
+obj-$(CONFIG_SOC_OMAP5)			+= $(omap-4-5-pm-common)
 obj-$(CONFIG_OMAP_PM_NOOP)		+= omap-pm-noop.o
 
 ifeq ($(CONFIG_PM),y)
@@ -235,26 +232,15 @@ obj-$(CONFIG_MACH_NOKIA_N8X0)		+= board-n8x0.o
 
 # Platform specific device init code
 
-omap-flash-$(CONFIG_MTD_NAND_OMAP2)	:= board-flash.o
-omap-flash-$(CONFIG_MTD_ONENAND_OMAP2)	:= board-flash.o
-obj-y					+= $(omap-flash-y) $(omap-flash-m)
-
 omap-hsmmc-$(CONFIG_MMC_OMAP_HS)	:= hsmmc.o
 obj-y					+= $(omap-hsmmc-m) $(omap-hsmmc-y)
 
-obj-y					+= usb-musb.o
 obj-y					+= omap_phy_internal.o
 
 obj-$(CONFIG_MACH_OMAP2_TUSB6010)	+= usb-tusb6010.o
-obj-y					+= usb-host.o
 
 onenand-$(CONFIG_MTD_ONENAND_OMAP2)	:= gpmc-onenand.o
 obj-y					+= $(onenand-m) $(onenand-y)
 
 nand-$(CONFIG_MTD_NAND_OMAP2)		:= gpmc-nand.o
 obj-y					+= $(nand-m) $(nand-y)
-
-smsc911x-$(CONFIG_SMSC911X)		:= gpmc-smsc911x.o
-obj-y					+= $(smsc911x-m) $(smsc911x-y)
-
-obj-y					+= common-board-devices.o twl-common.o dss-common.o

arch/arm/mach-omap2/board-flash.c

@@ -1,242 +0,0 @@
-/*
- * board-flash.c
- * Modified from mach-omap2/board-3430sdp-flash.c
- *
- * Copyright (C) 2009 Nokia Corporation
- * Copyright (C) 2009 Texas Instruments
- *
- * Vimal Singh <vimalsingh@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/omap-gpmc.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/io.h>
-
-#include <linux/platform_data/mtd-nand-omap2.h>
-#include <linux/platform_data/mtd-onenand-omap2.h>
-
-#include "soc.h"
-#include "common.h"
-#include "board-flash.h"
-
-#define REG_FPGA_REV			0x10
-#define REG_FPGA_DIP_SWITCH_INPUT2	0x60
-#define MAX_SUPPORTED_GPMC_CONFIG	3
-
-#define DEBUG_BASE		0x08000000 /* debug board */
-
-/* various memory sizes */
-#define FLASH_SIZE_SDPV1	SZ_64M	/* NOR flash (64 Meg aligned) */
-#define FLASH_SIZE_SDPV2	SZ_128M	/* NOR flash (256 Meg aligned) */
-
-static struct physmap_flash_data board_nor_data = {
-	.width		= 2,
-};
-
-static struct resource board_nor_resource = {
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device board_nor_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-			.platform_data = &board_nor_data,
-	},
-	.num_resources	= 1,
-	.resource	= &board_nor_resource,
-};
-
-static void
-__init board_nor_init(struct mtd_partition *nor_parts, u8 nr_parts, u8 cs)
-{
-	int err;
-
-	board_nor_data.parts	= nor_parts;
-	board_nor_data.nr_parts	= nr_parts;
-
-	/* Configure start address and size of NOR device */
-	if (omap_rev() >= OMAP3430_REV_ES1_0) {
-		err = gpmc_cs_request(cs, FLASH_SIZE_SDPV2 - 1,
-				(unsigned long *)&board_nor_resource.start);
-		board_nor_resource.end = board_nor_resource.start
-					+ FLASH_SIZE_SDPV2 - 1;
-	} else {
-		err = gpmc_cs_request(cs, FLASH_SIZE_SDPV1 - 1,
-				(unsigned long *)&board_nor_resource.start);
-		board_nor_resource.end = board_nor_resource.start
-					+ FLASH_SIZE_SDPV1 - 1;
-	}
-	if (err < 0) {
-		pr_err("NOR: Can't request GPMC CS\n");
-		return;
-	}
-	if (platform_device_register(&board_nor_device) < 0)
-		pr_err("Unable to register NOR device\n");
-}
-
-#if IS_ENABLED(CONFIG_MTD_ONENAND_OMAP2)
-static struct omap_onenand_platform_data board_onenand_data = {
-	.dma_channel	= -1,   /* disable DMA in OMAP OneNAND driver */
-};
-
-void
-__init board_onenand_init(struct mtd_partition *onenand_parts,
-				u8 nr_parts, u8 cs)
-{
-	board_onenand_data.cs		= cs;
-	board_onenand_data.parts	= onenand_parts;
-	board_onenand_data.nr_parts	= nr_parts;
-
-	gpmc_onenand_init(&board_onenand_data);
-}
-#endif /* IS_ENABLED(CONFIG_MTD_ONENAND_OMAP2) */
-
-#if IS_ENABLED(CONFIG_MTD_NAND_OMAP2)
-
-/* Note that all values in this struct are in nanoseconds */
-struct gpmc_timings nand_default_timings[1] = {
-	{
-		.sync_clk = 0,
-
-		.cs_on = 0,
-		.cs_rd_off = 36,
-		.cs_wr_off = 36,
-
-		.we_on = 6,
-		.oe_on = 6,
-
-		.adv_on = 6,
-		.adv_rd_off = 24,
-		.adv_wr_off = 36,
-
-		.we_off = 30,
-		.oe_off = 48,
-
-		.access = 54,
-		.rd_cycle = 72,
-		.wr_cycle = 72,
-
-		.wr_access = 30,
-		.wr_data_mux_bus = 0,
-	},
-};
-
-static struct omap_nand_platform_data board_nand_data;
-
-void
-__init board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs,
-				int nand_type, struct gpmc_timings *gpmc_t)
-{
-	board_nand_data.cs		= cs;
-	board_nand_data.parts		= nand_parts;
-	board_nand_data.nr_parts	= nr_parts;
-	board_nand_data.devsize		= nand_type;
-
-	board_nand_data.ecc_opt = OMAP_ECC_HAM1_CODE_SW;
-	gpmc_nand_init(&board_nand_data, gpmc_t);
-}
-#endif /* IS_ENABLED(CONFIG_MTD_NAND_OMAP2) */
-
-/**
- * get_gpmc0_type - Reads the FPGA DIP_SWITCH_INPUT_REGISTER2 to get
- * the various cs values.
- */
-static u8 get_gpmc0_type(void)
-{
-	u8 cs = 0;
-	void __iomem *fpga_map_addr;
-
-	fpga_map_addr = ioremap(DEBUG_BASE, 4096);
-	if (!fpga_map_addr)
-		return -ENOMEM;
-
-	if (!(readw_relaxed(fpga_map_addr + REG_FPGA_REV)))
-		/* we dont have an DEBUG FPGA??? */
-		/* Depend on #defines!! default to strata boot return param */
-		goto unmap;
-
-	/* S8-DIP-OFF = 1, S8-DIP-ON = 0 */
-	cs = readw_relaxed(fpga_map_addr + REG_FPGA_DIP_SWITCH_INPUT2) & 0xf;
-
-	/* ES2.0 SDP's onwards 4 dip switches are provided for CS */
-	if (omap_rev() >= OMAP3430_REV_ES1_0)
-		/* change (S8-1:4=DS-2:0) to (S8-4:1=DS-2:0) */
-		cs = ((cs & 8) >> 3) | ((cs & 4) >> 1) |
-			((cs & 2) << 1) | ((cs & 1) << 3);
-	else
-		/* change (S8-1:3=DS-2:0) to (S8-3:1=DS-2:0) */
-		cs = ((cs & 4) >> 2) | (cs & 2) | ((cs & 1) << 2);
-unmap:
-	iounmap(fpga_map_addr);
-	return cs;
-}
-
-/**
- * board_flash_init - Identify devices connected to GPMC and register.
- *
- * @return - void.
- */
-void __init board_flash_init(struct flash_partitions partition_info[],
-			char chip_sel_board[][GPMC_CS_NUM], int nand_type)
-{
-	u8		cs = 0;
-	u8		norcs = GPMC_CS_NUM + 1;
-	u8		nandcs = GPMC_CS_NUM + 1;
-	u8		onenandcs = GPMC_CS_NUM + 1;
-	u8		idx;
-	unsigned char	*config_sel = NULL;
-
-	/* REVISIT: Is this return correct idx for 2430 SDP?
-	 * for which cs configuration matches for 2430 SDP?
-	 */
-	idx = get_gpmc0_type();
-	if (idx >= MAX_SUPPORTED_GPMC_CONFIG) {
-		pr_err("%s: Invalid chip select: %d\n", __func__, cs);
-		return;
-	}
-	config_sel = (unsigned char *)(chip_sel_board[idx]);
-
-	while (cs < GPMC_CS_NUM) {
-		switch (config_sel[cs]) {
-		case PDC_NOR:
-			if (norcs > GPMC_CS_NUM)
-				norcs = cs;
-			break;
-		case PDC_NAND:
-			if (nandcs > GPMC_CS_NUM)
-				nandcs = cs;
-			break;
-		case PDC_ONENAND:
-			if (onenandcs > GPMC_CS_NUM)
-				onenandcs = cs;
-			break;
-		}
-		cs++;
-	}
-
-	if (norcs > GPMC_CS_NUM)
-		pr_err("NOR: Unable to find configuration in GPMC\n");
-	else
-		board_nor_init(partition_info[0].parts,
-				partition_info[0].nr_parts, norcs);
-
-	if (onenandcs > GPMC_CS_NUM)
-		pr_err("OneNAND: Unable to find configuration in GPMC\n");
-	else
-		board_onenand_init(partition_info[1].parts,
-					partition_info[1].nr_parts, onenandcs);
-
-	if (nandcs > GPMC_CS_NUM)
-		pr_err("NAND: Unable to find configuration in GPMC\n");
-	else
-		board_nand_init(partition_info[2].parts,
-			partition_info[2].nr_parts, nandcs,
-			nand_type, nand_default_timings);
-}

arch/arm/mach-omap2/board-flash.h

@@ -1,56 +0,0 @@
-/*
- *  board-sdp.h
- *
- *  Information structures for SDP-specific board config data
- *
- *  Copyright (C) 2009 Nokia Corporation
- *  Copyright (C) 2009 Texas Instruments
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#define PDC_NOR		1
-#define PDC_NAND	2
-#define PDC_ONENAND	3
-#define DBG_MPDB	4
-
-struct flash_partitions {
-	struct mtd_partition *parts;
-	int nr_parts;
-};
-
-#if IS_ENABLED(CONFIG_MTD_NAND_OMAP2) || IS_ENABLED(CONFIG_MTD_ONENAND_OMAP2)
-extern void board_flash_init(struct flash_partitions [],
-				char chip_sel[][GPMC_CS_NUM], int nand_type);
-#else
-static inline void board_flash_init(struct flash_partitions part[],
-				char chip_sel[][GPMC_CS_NUM], int nand_type)
-{
-}
-#endif
-
-#if IS_ENABLED(CONFIG_MTD_NAND_OMAP2)
-extern void board_nand_init(struct mtd_partition *nand_parts,
-		u8 nr_parts, u8 cs, int nand_type, struct gpmc_timings *gpmc_t);
-extern struct gpmc_timings nand_default_timings[];
-#else
-static inline void board_nand_init(struct mtd_partition *nand_parts,
-		u8 nr_parts, u8 cs, int nand_type, struct gpmc_timings *gpmc_t)
-{
-}
-#define	nand_default_timings	NULL
-#endif
-
-#if IS_ENABLED(CONFIG_MTD_ONENAND_OMAP2)
-extern void board_onenand_init(struct mtd_partition *nand_parts,
-					u8 nr_parts, u8 cs);
-#else
-static inline void board_onenand_init(struct mtd_partition *nand_parts,
-					u8 nr_parts, u8 cs)
-{
-}
-#endif

arch/arm/mach-omap2/board-generic.c

@@ -339,6 +339,7 @@ static const char *const dra72x_boards_compat[] __initconst = {
 	"ti,am5718",
 	"ti,am5716",
 	"ti,dra722",
+	"ti,dra718",
 	NULL,
 };
 

arch/arm/mach-omap2/clockdomains7xx_data.c

@@ -409,7 +409,7 @@ static struct clockdomain l4sec_7xx_clkdm = {
 	.dep_bit	  = DRA7XX_L4SEC_STATDEP_SHIFT,
 	.wkdep_srcs	  = l4sec_wkup_sleep_deps,
 	.sleepdep_srcs	  = l4sec_wkup_sleep_deps,
-	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+	.flags		  = CLKDM_CAN_SWSUP,
 };
 
 static struct clockdomain l3main1_7xx_clkdm = {

arch/arm/mach-omap2/common-board-devices.c

@@ -1,102 +0,0 @@
-/*
- * common-board-devices.c
- *
- * Copyright (C) 2011 CompuLab, Ltd.
- * Author: Mike Rapoport <mike@compulab.co.il>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#include <linux/gpio.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
-
-#include <linux/platform_data/spi-omap2-mcspi.h>
-
-#include "common.h"
-#include "common-board-devices.h"
-
-#if IS_ENABLED(CONFIG_TOUCHSCREEN_ADS7846)
-static struct omap2_mcspi_device_config ads7846_mcspi_config = {
-	.turbo_mode	= 0,
-};
-
-static struct ads7846_platform_data ads7846_config = {
-	.x_max			= 0x0fff,
-	.y_max			= 0x0fff,
-	.x_plate_ohms		= 180,
-	.pressure_max		= 255,
-	.debounce_max		= 10,
-	.debounce_tol		= 3,
-	.debounce_rep		= 1,
-	.gpio_pendown		= -EINVAL,
-	.keep_vref_on		= 1,
-};
-
-static struct spi_board_info ads7846_spi_board_info __initdata = {
-	.modalias		= "ads7846",
-	.bus_num		= -EINVAL,
-	.chip_select		= 0,
-	.max_speed_hz		= 1500000,
-	.controller_data	= &ads7846_mcspi_config,
-	.irq			= -EINVAL,
-	.platform_data		= &ads7846_config,
-};
-
-void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce,
-			      struct ads7846_platform_data *board_pdata)
-{
-	struct spi_board_info *spi_bi = &ads7846_spi_board_info;
-	int err;
-
-	/*
-	 * If a board defines get_pendown_state() function, request the pendown
-	 * GPIO and set the GPIO debounce time.
-	 * If a board does not define the get_pendown_state() function, then
-	 * the ads7846 driver will setup the pendown GPIO itself.
-	 */
-	if (board_pdata && board_pdata->get_pendown_state) {
-		err = gpio_request_one(gpio_pendown, GPIOF_IN, "TSPenDown");
-		if (err) {
-			pr_err("Couldn't obtain gpio for TSPenDown: %d\n", err);
-			return;
-		}
-
-		if (gpio_debounce)
-			gpio_set_debounce(gpio_pendown, gpio_debounce);
-
-		gpio_export(gpio_pendown, 0);
-	}
-
-	spi_bi->bus_num	= bus_num;
-	spi_bi->irq	= gpio_to_irq(gpio_pendown);
-
-	ads7846_config.gpio_pendown = gpio_pendown;
-
-	if (board_pdata) {
-		board_pdata->gpio_pendown = gpio_pendown;
-		board_pdata->gpio_pendown_debounce = gpio_debounce;
-		spi_bi->platform_data = board_pdata;
-	}
-
-	spi_register_board_info(&ads7846_spi_board_info, 1);
-}
-#else
-void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce,
-			      struct ads7846_platform_data *board_pdata)
-{
-}
-#endif

arch/arm/mach-omap2/common-board-devices.h

@@ -3,15 +3,7 @@
 
 #include <sound/tlv320aic3x.h>
 #include <linux/mfd/menelaus.h>
-#include "twl-common.h"
 
-#define NAND_BLOCK_SIZE	SZ_128K
-
-struct mtd_partition;
-struct ads7846_platform_data;
-
-void omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce,
-		       struct ads7846_platform_data *board_pdata);
 void *n8x0_legacy_init(void);
 
 extern struct menelaus_platform_data n8x0_menelaus_platform_data;

arch/arm/mach-omap2/common.h

@@ -77,15 +77,6 @@ static inline int omap4_pm_init_early(void)
 }
 #endif
 
-#ifdef CONFIG_OMAP_MUX
-int omap_mux_late_init(void);
-#else
-static inline int omap_mux_late_init(void)
-{
-	return 0;
-}
-#endif
-
 extern void omap2_init_common_infrastructure(void);
 
 extern void omap_init_time(void);
@@ -262,8 +253,6 @@ extern void __iomem *omap4_get_sar_ram_base(void);
 extern void omap4_mpuss_early_init(void);
 extern void omap_do_wfi(void);
 
-extern void omap4_secondary_startup(void);
-extern void omap4460_secondary_startup(void);
 
 #ifdef CONFIG_SMP
 /* Needed for secondary core boot */
@@ -275,16 +264,11 @@ extern void omap4_cpu_die(unsigned int cpu);
 extern int omap4_cpu_kill(unsigned int cpu);
 
 extern const struct smp_operations omap4_smp_ops;
-
-extern void omap5_secondary_startup(void);
-extern void omap5_secondary_hyp_startup(void);
 #endif
 
 #if defined(CONFIG_SMP) && defined(CONFIG_PM)
 extern int omap4_mpuss_init(void);
 extern int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state);
-extern int omap4_finish_suspend(unsigned long cpu_state);
-extern void omap4_cpu_resume(void);
 extern int omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state);
 #else
 static inline int omap4_enter_lowpower(unsigned int cpu,
@@ -305,14 +289,41 @@ static inline int omap4_mpuss_init(void)
 	return 0;
 }
 
+#endif
+
+#ifdef CONFIG_ARCH_OMAP4
+void omap4_secondary_startup(void);
+void omap4460_secondary_startup(void);
+int omap4_finish_suspend(unsigned long cpu_state);
+void omap4_cpu_resume(void);
+#else
+static inline void omap4_secondary_startup(void)
+{
+}
+
+static inline void omap4460_secondary_startup(void)
+{
+}
 static inline int omap4_finish_suspend(unsigned long cpu_state)
 {
 	return 0;
 }
-
 static inline void omap4_cpu_resume(void)
-{}
+{
+}
+#endif
 
+#if defined(CONFIG_SOC_OMAP5) || defined(CONFIG_SOC_DRA7XX)
+void omap5_secondary_startup(void);
+void omap5_secondary_hyp_startup(void);
+#else
+static inline void omap5_secondary_startup(void)
+{
+}
+
+static inline void omap5_secondary_hyp_startup(void)
+{
+}
 #endif
 
 void pdata_quirks_init(const struct of_device_id *);

arch/arm/mach-omap2/cpuidle44xx.c

@@ -21,6 +21,7 @@
 #include "common.h"
 #include "pm.h"
 #include "prm.h"
+#include "soc.h"
 #include "clockdomain.h"
 
 #define MAX_CPUS	2
@@ -30,6 +31,7 @@ struct idle_statedata {
 	u32 cpu_state;
 	u32 mpu_logic_state;
 	u32 mpu_state;
+	u32 mpu_state_vote;
 };
 
 static struct idle_statedata omap4_idle_data[] = {
@@ -50,12 +52,26 @@ static struct idle_statedata omap4_idle_data[] = {
 	},
 };
 
+static struct idle_statedata omap5_idle_data[] = {
+	{
+		.cpu_state = PWRDM_POWER_ON,
+		.mpu_state = PWRDM_POWER_ON,
+		.mpu_logic_state = PWRDM_POWER_ON,
+	},
+	{
+		.cpu_state = PWRDM_POWER_RET,
+		.mpu_state = PWRDM_POWER_RET,
+		.mpu_logic_state = PWRDM_POWER_RET,
+	},
+};
+
 static struct powerdomain *mpu_pd, *cpu_pd[MAX_CPUS];
 static struct clockdomain *cpu_clkdm[MAX_CPUS];
 
 static atomic_t abort_barrier;
 static bool cpu_done[MAX_CPUS];
 static struct idle_statedata *state_ptr = &omap4_idle_data[0];
+static DEFINE_RAW_SPINLOCK(mpu_lock);
 
 /* Private functions */
 
@@ -77,6 +93,32 @@ static int omap_enter_idle_simple(struct cpuidle_device *dev,
 	return index;
 }
 
+static int omap_enter_idle_smp(struct cpuidle_device *dev,
+			       struct cpuidle_driver *drv,
+			       int index)
+{
+	struct idle_statedata *cx = state_ptr + index;
+	unsigned long flag;
+
+	raw_spin_lock_irqsave(&mpu_lock, flag);
+	cx->mpu_state_vote++;
+	if (cx->mpu_state_vote == num_online_cpus()) {
+		pwrdm_set_logic_retst(mpu_pd, cx->mpu_logic_state);
+		omap_set_pwrdm_state(mpu_pd, cx->mpu_state);
+	}
+	raw_spin_unlock_irqrestore(&mpu_lock, flag);
+
+	omap4_enter_lowpower(dev->cpu, cx->cpu_state);
+
+	raw_spin_lock_irqsave(&mpu_lock, flag);
+	if (cx->mpu_state_vote == num_online_cpus())
+		omap_set_pwrdm_state(mpu_pd, PWRDM_POWER_ON);
+	cx->mpu_state_vote--;
+	raw_spin_unlock_irqrestore(&mpu_lock, flag);
+
+	return index;
+}
+
 static int omap_enter_idle_coupled(struct cpuidle_device *dev,
 			struct cpuidle_driver *drv,
 			int index)
@@ -220,6 +262,32 @@ static struct cpuidle_driver omap4_idle_driver = {
 	.safe_state_index = 0,
 };
 
+static struct cpuidle_driver omap5_idle_driver = {
+	.name				= "omap5_idle",
+	.owner				= THIS_MODULE,
+	.states = {
+		{
+			/* C1 - CPU0 ON + CPU1 ON + MPU ON */
+			.exit_latency = 2 + 2,
+			.target_residency = 5,
+			.enter = omap_enter_idle_simple,
+			.name = "C1",
+			.desc = "CPUx WFI, MPUSS ON"
+		},
+		{
+			/* C2 - CPU0 RET + CPU1 RET + MPU CSWR */
+			.exit_latency = 48 + 60,
+			.target_residency = 100,
+			.flags = CPUIDLE_FLAG_TIMER_STOP,
+			.enter = omap_enter_idle_smp,
+			.name = "C2",
+			.desc = "CPUx CSWR, MPUSS CSWR",
+		},
+	},
+	.state_count = ARRAY_SIZE(omap5_idle_data),
+	.safe_state_index = 0,
+};
+
 /* Public functions */
 
 /**
@@ -230,6 +298,16 @@ static struct cpuidle_driver omap4_idle_driver = {
  */
 int __init omap4_idle_init(void)
 {
+	struct cpuidle_driver *idle_driver;
+
+	if (soc_is_omap54xx()) {
+		state_ptr = &omap5_idle_data[0];
+		idle_driver = &omap5_idle_driver;
+	} else {
+		state_ptr = &omap4_idle_data[0];
+		idle_driver = &omap4_idle_driver;
+	}
+
 	mpu_pd = pwrdm_lookup("mpu_pwrdm");
 	cpu_pd[0] = pwrdm_lookup("cpu0_pwrdm");
 	cpu_pd[1] = pwrdm_lookup("cpu1_pwrdm");
@@ -244,5 +322,5 @@ int __init omap4_idle_init(void)
 	/* Configure the broadcast timer on each cpu */
 	on_each_cpu(omap_setup_broadcast_timer, NULL, 1);
 
-	return cpuidle_register(&omap4_idle_driver, cpu_online_mask);
+	return cpuidle_register(idle_driver, cpu_online_mask);
 }

arch/arm/mach-omap2/devices.c

@@ -30,7 +30,6 @@
 
 #include "soc.h"
 #include "common.h"
-#include "mux.h"
 #include "control.h"
 #include "display.h"
 

arch/arm/mach-omap2/dss-common.c

@@ -1,37 +0,0 @@
-/*
- * Copyright (C) 2012 Texas Instruments, Inc..
- * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-/*
- * NOTE: this is a transitional file to help with DT adaptation.
- * This file will be removed when DSS supports DT.
- */
-
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-
-#include <linux/platform_data/omapdss.h>
-#include <video/omap-panel-data.h>
-
-#include "soc.h"
-#include "dss-common.h"
-#include "mux.h"
-#include "display.h"
-

arch/arm/mach-omap2/dss-common.h

@@ -1,13 +0,0 @@
-#ifndef __OMAP_DSS_COMMON__
-#define __OMAP_DSS_COMMON__
-
-/*
- * NOTE: this is a transitional file to help with DT adaptation.
- * This file will be removed when DSS supports DT.
- */
-
-void __init omap4_panda_display_init_of(void);
-void __init omap_4430sdp_display_init_of(void);
-void __init omap3_igep2_display_init_of(void);
-
-#endif

arch/arm/mach-omap2/gpmc-smsc911x.c

@@ -1,100 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/gpmc-smsc911x.c
- *
- * Copyright (C) 2009 Li-Pro.Net
- * Stephan Linz <linz@li-pro.net>
- *
- * Modified from linux/arch/arm/mach-omap2/gpmc-smc91x.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#define pr_fmt(fmt) "%s: " fmt, __func__
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/smsc911x.h>
-
-#include "gpmc.h"
-#include "gpmc-smsc911x.h"
-
-static struct resource gpmc_smsc911x_resources[] = {
-	[0] = {
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.flags		= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
-	},
-};
-
-static struct smsc911x_platform_config gpmc_smsc911x_config = {
-	.phy_interface	= PHY_INTERFACE_MODE_MII,
-	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
-	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
-};
-
-/*
- * Initialize smsc911x device connected to the GPMC. Note that we
- * assume that pin multiplexing is done in the board-*.c file,
- * or in the bootloader.
- */
-void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *gpmc_cfg)
-{
-	struct platform_device *pdev;
-	unsigned long cs_mem_base;
-	int ret;
-
-	if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) {
-		pr_err("Failed to request GPMC mem region\n");
-		return;
-	}
-
-	gpmc_smsc911x_resources[0].start = cs_mem_base + 0x0;
-	gpmc_smsc911x_resources[0].end = cs_mem_base + 0xff;
-
-	if (gpio_request_one(gpmc_cfg->gpio_irq, GPIOF_IN, "smsc911x irq")) {
-		pr_err("Failed to request IRQ GPIO%d\n", gpmc_cfg->gpio_irq);
-		goto free1;
-	}
-
-	gpmc_smsc911x_resources[1].start = gpio_to_irq(gpmc_cfg->gpio_irq);
-
-	if (gpio_is_valid(gpmc_cfg->gpio_reset)) {
-		ret = gpio_request_one(gpmc_cfg->gpio_reset,
-				       GPIOF_OUT_INIT_HIGH, "smsc911x reset");
-		if (ret) {
-			pr_err("Failed to request reset GPIO%d\n",
-			       gpmc_cfg->gpio_reset);
-			goto free2;
-		}
-
-		gpio_set_value(gpmc_cfg->gpio_reset, 0);
-		msleep(100);
-		gpio_set_value(gpmc_cfg->gpio_reset, 1);
-	}
-
-	gpmc_smsc911x_config.flags = gpmc_cfg->flags ? : SMSC911X_USE_16BIT;
-
-	pdev = platform_device_register_resndata(NULL, "smsc911x", gpmc_cfg->id,
-		 gpmc_smsc911x_resources, ARRAY_SIZE(gpmc_smsc911x_resources),
-		 &gpmc_smsc911x_config, sizeof(gpmc_smsc911x_config));
-	if (IS_ERR(pdev)) {
-		pr_err("Unable to register platform device\n");
-		gpio_free(gpmc_cfg->gpio_reset);
-		goto free2;
-	}
-
-	return;
-
-free2:
-	gpio_free(gpmc_cfg->gpio_irq);
-free1:
-	gpmc_cs_free(gpmc_cfg->cs);
-
-	pr_err("Could not initialize smsc911x device\n");
-}

arch/arm/mach-omap2/gpmc-smsc911x.h

@@ -1,35 +0,0 @@
-/*
- * arch/arm/plat-omap/include/plat/gpmc-smsc911x.h
- *
- * Copyright (C) 2009 Li-Pro.Net
- * Stephan Linz <linz@li-pro.net>
- *
- * Modified from arch/arm/plat-omap/include/plat/gpmc-smc91x.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_OMAP_GPMC_SMSC911X_H__
-
-struct omap_smsc911x_platform_data {
-	int	id;
-	int	cs;
-	int	gpio_irq;
-	int	gpio_reset;
-	u32	flags;
-};
-
-#if IS_ENABLED(CONFIG_SMSC911X)
-
-extern void gpmc_smsc911x_init(struct omap_smsc911x_platform_data *d);
-
-#else
-
-static inline void gpmc_smsc911x_init(struct omap_smsc911x_platform_data *d)
-{
-}
-
-#endif
-#endif

arch/arm/mach-omap2/hsmmc.c

@@ -22,7 +22,6 @@
 #include "omap_device.h"
 #include "omap-pm.h"
 
-#include "mux.h"
 #include "hsmmc.h"
 #include "control.h"
 
@@ -147,91 +146,6 @@ static int nop_mmc_set_power(struct device *dev, int power_on, int vdd)
 	return 0;
 }
 
-static inline void omap_hsmmc_mux(struct omap_hsmmc_platform_data
-				  *mmc_controller, int controller_nr)
-{
-	if (gpio_is_valid(mmc_controller->gpio_cd) &&
-	    (mmc_controller->gpio_cd < OMAP_MAX_GPIO_LINES))
-		omap_mux_init_gpio(mmc_controller->gpio_cd,
-				   OMAP_PIN_INPUT_PULLUP);
-	if (gpio_is_valid(mmc_controller->gpio_cod) &&
-	    (mmc_controller->gpio_cod < OMAP_MAX_GPIO_LINES))
-		omap_mux_init_gpio(mmc_controller->gpio_cod,
-				   OMAP_PIN_INPUT_PULLUP);
-	if (gpio_is_valid(mmc_controller->gpio_wp) &&
-	    (mmc_controller->gpio_wp < OMAP_MAX_GPIO_LINES))
-		omap_mux_init_gpio(mmc_controller->gpio_wp,
-				   OMAP_PIN_INPUT_PULLUP);
-	if (cpu_is_omap34xx()) {
-		if (controller_nr == 0) {
-			omap_mux_init_signal("sdmmc1_clk",
-				OMAP_PIN_INPUT_PULLUP);
-			omap_mux_init_signal("sdmmc1_cmd",
-				OMAP_PIN_INPUT_PULLUP);
-			omap_mux_init_signal("sdmmc1_dat0",
-				OMAP_PIN_INPUT_PULLUP);
-			if (mmc_controller->caps &
-				(MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA)) {
-				omap_mux_init_signal("sdmmc1_dat1",
-					OMAP_PIN_INPUT_PULLUP);
-				omap_mux_init_signal("sdmmc1_dat2",
-					OMAP_PIN_INPUT_PULLUP);
-				omap_mux_init_signal("sdmmc1_dat3",
-					OMAP_PIN_INPUT_PULLUP);
-			}
-			if (mmc_controller->caps &
-						MMC_CAP_8_BIT_DATA) {
-				omap_mux_init_signal("sdmmc1_dat4",
-					OMAP_PIN_INPUT_PULLUP);
-				omap_mux_init_signal("sdmmc1_dat5",
-					OMAP_PIN_INPUT_PULLUP);
-				omap_mux_init_signal("sdmmc1_dat6",
-					OMAP_PIN_INPUT_PULLUP);
-				omap_mux_init_signal("sdmmc1_dat7",
-					OMAP_PIN_INPUT_PULLUP);
-			}
-		}
-		if (controller_nr == 1) {
-			/* MMC2 */
-			omap_mux_init_signal("sdmmc2_clk",
-				OMAP_PIN_INPUT_PULLUP);
-			omap_mux_init_signal("sdmmc2_cmd",
-				OMAP_PIN_INPUT_PULLUP);
-			omap_mux_init_signal("sdmmc2_dat0",
-				OMAP_PIN_INPUT_PULLUP);
-
-			/*
-			 * For 8 wire configurations, Lines DAT4, 5, 6 and 7
-			 * need to be muxed in the board-*.c files
-			 */
-			if (mmc_controller->caps &
-				(MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA)) {
-				omap_mux_init_signal("sdmmc2_dat1",
-					OMAP_PIN_INPUT_PULLUP);
-				omap_mux_init_signal("sdmmc2_dat2",
-					OMAP_PIN_INPUT_PULLUP);
-				omap_mux_init_signal("sdmmc2_dat3",
-					OMAP_PIN_INPUT_PULLUP);
-			}
-			if (mmc_controller->caps &
-							MMC_CAP_8_BIT_DATA) {
-				omap_mux_init_signal("sdmmc2_dat4.sdmmc2_dat4",
-					OMAP_PIN_INPUT_PULLUP);
-				omap_mux_init_signal("sdmmc2_dat5.sdmmc2_dat5",
-					OMAP_PIN_INPUT_PULLUP);
-				omap_mux_init_signal("sdmmc2_dat6.sdmmc2_dat6",
-					OMAP_PIN_INPUT_PULLUP);
-				omap_mux_init_signal("sdmmc2_dat7.sdmmc2_dat7",
-					OMAP_PIN_INPUT_PULLUP);
-			}
-		}
-
-		/*
-		 * For MMC3 the pins need to be muxed in the board-*.c files
-		 */
-	}
-}
-
 static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c,
 					struct omap_hsmmc_platform_data *mmc)
 {
@@ -410,8 +324,6 @@ static void __init omap_hsmmc_init_one(struct omap2_hsmmc_info *hsmmcinfo,
 	if (res < 0)
 		goto free_mmc;
 
-	omap_hsmmc_mux(mmc_data, (ctrl_nr - 1));
-
 	name = "omap_hsmmc";
 	res = snprintf(oh_name, MAX_OMAP_MMC_HWMOD_NAME_LEN,
 		     "mmc%d", ctrl_nr);

arch/arm/mach-omap2/i2c.c

@@ -26,7 +26,6 @@
 
 #include "prm.h"
 #include "common.h"
-#include "mux.h"
 #include "i2c.h"
 
 /* In register I2C_CON, Bit 15 is the I2C enable bit */
@@ -36,20 +35,6 @@
 
 #define MAX_OMAP_I2C_HWMOD_NAME_LEN	16
 
-static void __init omap2_i2c_mux_pins(int bus_id)
-{
-	char mux_name[sizeof("i2c2_scl.i2c2_scl")];
-
-	/* First I2C bus is not muxable */
-	if (bus_id == 1)
-		return;
-
-	sprintf(mux_name, "i2c%i_scl.i2c%i_scl", bus_id, bus_id);
-	omap_mux_init_signal(mux_name, OMAP_PIN_INPUT);
-	sprintf(mux_name, "i2c%i_sda.i2c%i_sda", bus_id, bus_id);
-	omap_mux_init_signal(mux_name, OMAP_PIN_INPUT);
-}
-
 /**
  * omap_i2c_reset - reset the omap i2c module.
  * @oh: struct omap_hwmod *
@@ -107,85 +92,3 @@ int omap_i2c_reset(struct omap_hwmod *oh)
 
 	return 0;
 }
-
-static int __init omap_i2c_nr_ports(void)
-{
-	int ports = 0;
-
-	if (cpu_is_omap24xx())
-		ports = 2;
-	else if (cpu_is_omap34xx())
-		ports = 3;
-	else if (cpu_is_omap44xx())
-		ports = 4;
-	return ports;
-}
-
-/*
- * XXX This function is a temporary compatibility wrapper - only
- * needed until the I2C driver can be converted to call
- * omap_pm_set_max_dev_wakeup_lat() and handle a return code.
- */
-static void omap_pm_set_max_mpu_wakeup_lat_compat(struct device *dev, long t)
-{
-	omap_pm_set_max_mpu_wakeup_lat(dev, t);
-}
-
-static const char name[] = "omap_i2c";
-
-int __init omap_i2c_add_bus(struct omap_i2c_bus_platform_data *i2c_pdata,
-				int bus_id)
-{
-	int l;
-	struct omap_hwmod *oh;
-	struct platform_device *pdev;
-	char oh_name[MAX_OMAP_I2C_HWMOD_NAME_LEN];
-	struct omap_i2c_bus_platform_data *pdata;
-	struct omap_i2c_dev_attr *dev_attr;
-
-	if (bus_id > omap_i2c_nr_ports())
-		return -EINVAL;
-
-	omap2_i2c_mux_pins(bus_id);
-
-	l = snprintf(oh_name, MAX_OMAP_I2C_HWMOD_NAME_LEN, "i2c%d", bus_id);
-	WARN(l >= MAX_OMAP_I2C_HWMOD_NAME_LEN,
-		"String buffer overflow in I2C%d device setup\n", bus_id);
-	oh = omap_hwmod_lookup(oh_name);
-	if (!oh) {
-			pr_err("Could not look up %s\n", oh_name);
-			return -EEXIST;
-	}
-
-	pdata = i2c_pdata;
-	/*
-	 * pass the hwmod class's CPU-specific knowledge of I2C IP revision in
-	 * use, and functionality implementation flags, up to the OMAP I2C
-	 * driver via platform data
-	 */
-	pdata->rev = oh->class->rev;
-
-	dev_attr = (struct omap_i2c_dev_attr *)oh->dev_attr;
-	pdata->flags = dev_attr->flags;
-
-	/*
-	 * When waiting for completion of a i2c transfer, we need to
-	 * set a wake up latency constraint for the MPU. This is to
-	 * ensure quick enough wakeup from idle, when transfer
-	 * completes.
-	 * Only omap3 has support for constraints
-	 */
-	if (cpu_is_omap34xx())
-		pdata->set_mpu_wkup_lat = omap_pm_set_max_mpu_wakeup_lat_compat;
-	pdev = omap_device_build(name, bus_id, oh, pdata,
-				 sizeof(struct omap_i2c_bus_platform_data));
-	WARN(IS_ERR(pdev), "Could not build omap_device for %s\n", name);
-
-	return PTR_ERR_OR_ZERO(pdev);
-}
-
-static  int __init omap_i2c_cmdline(void)
-{
-	return omap_register_i2c_bus_cmdline();
-}
-omap_subsys_initcall(omap_i2c_cmdline);

arch/arm/mach-omap2/io.c

@@ -427,7 +427,6 @@ static void __init omap_hwmod_init_postsetup(void)
 
 static void __init __maybe_unused omap_common_late_init(void)
 {
-	omap_mux_late_init();
 	omap2_common_pm_late_init();
 	omap_soc_device_init();
 }
@@ -717,10 +716,11 @@ void __init omap5_init_early(void)
 			      OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE));
 	omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE));
 	omap2_control_base_init();
-	omap4_pm_init_early();
 	omap2_prcm_base_init();
 	omap5xxx_check_revision();
 	omap4_sar_ram_init();
+	omap4_mpuss_early_init();
+	omap4_pm_init_early();
 	omap54xx_voltagedomains_init();
 	omap54xx_powerdomains_init();
 	omap54xx_clockdomains_init();

arch/arm/mach-omap2/msdi.c

@@ -30,7 +30,6 @@
 #include "control.h"
 #include "omap_hwmod.h"
 #include "omap_device.h"
-#include "mux.h"
 #include "mmc.h"
 
 /*

arch/arm/mach-omap2/mux.c

@@ -1,1153 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/mux.c
- *
- * OMAP2, OMAP3 and OMAP4 pin multiplexing configurations
- *
- * Copyright (C) 2004 - 2010 Texas Instruments Inc.
- * Copyright (C) 2003 - 2008 Nokia Corporation
- *
- * Written by Tony Lindgren
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/list.h>
-#include <linux/slab.h>
-#include <linux/ctype.h>
-#include <linux/debugfs.h>
-#include <linux/seq_file.h>
-#include <linux/uaccess.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-
-
-#include "omap_hwmod.h"
-
-#include "soc.h"
-#include "control.h"
-#include "mux.h"
-#include "prm.h"
-#include "common.h"
-
-#define OMAP_MUX_BASE_OFFSET		0x30	/* Offset from CTRL_BASE */
-#define OMAP_MUX_BASE_SZ		0x5ca
-
-struct omap_mux_entry {
-	struct omap_mux		mux;
-	struct list_head	node;
-};
-
-static LIST_HEAD(mux_partitions);
-static DEFINE_MUTEX(muxmode_mutex);
-
-struct omap_mux_partition *omap_mux_get(const char *name)
-{
-	struct omap_mux_partition *partition;
-
-	list_for_each_entry(partition, &mux_partitions, node) {
-		if (!strcmp(name, partition->name))
-			return partition;
-	}
-
-	return NULL;
-}
-
-u16 omap_mux_read(struct omap_mux_partition *partition, u16 reg)
-{
-	if (partition->flags & OMAP_MUX_REG_8BIT)
-		return readb_relaxed(partition->base + reg);
-	else
-		return readw_relaxed(partition->base + reg);
-}
-
-void omap_mux_write(struct omap_mux_partition *partition, u16 val,
-			   u16 reg)
-{
-	if (partition->flags & OMAP_MUX_REG_8BIT)
-		writeb_relaxed(val, partition->base + reg);
-	else
-		writew_relaxed(val, partition->base + reg);
-}
-
-void omap_mux_write_array(struct omap_mux_partition *partition,
-				 struct omap_board_mux *board_mux)
-{
-	if (!board_mux)
-		return;
-
-	while (board_mux->reg_offset != OMAP_MUX_TERMINATOR) {
-		omap_mux_write(partition, board_mux->value,
-			       board_mux->reg_offset);
-		board_mux++;
-	}
-}
-
-#ifdef CONFIG_OMAP_MUX
-
-static char *omap_mux_options;
-
-static int __init _omap_mux_init_gpio(struct omap_mux_partition *partition,
-				      int gpio, int val)
-{
-	struct omap_mux_entry *e;
-	struct omap_mux *gpio_mux = NULL;
-	u16 old_mode;
-	u16 mux_mode;
-	int found = 0;
-	struct list_head *muxmodes = &partition->muxmodes;
-
-	if (!gpio)
-		return -EINVAL;
-
-	list_for_each_entry(e, muxmodes, node) {
-		struct omap_mux *m = &e->mux;
-		if (gpio == m->gpio) {
-			gpio_mux = m;
-			found++;
-		}
-	}
-
-	if (found == 0) {
-		pr_err("%s: Could not set gpio%i\n", __func__, gpio);
-		return -ENODEV;
-	}
-
-	if (found > 1) {
-		pr_info("%s: Multiple gpio paths (%d) for gpio%i\n", __func__,
-			found, gpio);
-		return -EINVAL;
-	}
-
-	old_mode = omap_mux_read(partition, gpio_mux->reg_offset);
-	mux_mode = val & ~(OMAP_MUX_NR_MODES - 1);
-	mux_mode |= partition->gpio;
-	pr_debug("%s: Setting signal %s.gpio%i 0x%04x -> 0x%04x\n", __func__,
-		 gpio_mux->muxnames[0], gpio, old_mode, mux_mode);
-	omap_mux_write(partition, mux_mode, gpio_mux->reg_offset);
-
-	return 0;
-}
-
-int __init omap_mux_init_gpio(int gpio, int val)
-{
-	struct omap_mux_partition *partition;
-	int ret;
-
-	list_for_each_entry(partition, &mux_partitions, node) {
-		ret = _omap_mux_init_gpio(partition, gpio, val);
-		if (!ret)
-			return ret;
-	}
-
-	return -ENODEV;
-}
-
-static int __init _omap_mux_get_by_name(struct omap_mux_partition *partition,
-					const char *muxname,
-					struct omap_mux **found_mux)
-{
-	struct omap_mux *mux = NULL;
-	struct omap_mux_entry *e;
-	const char *mode_name;
-	int found = 0, found_mode = 0, mode0_len = 0;
-	struct list_head *muxmodes = &partition->muxmodes;
-
-	mode_name = strchr(muxname, '.');
-	if (mode_name) {
-		mode0_len = strlen(muxname) - strlen(mode_name);
-		mode_name++;
-	} else {
-		mode_name = muxname;
-	}
-
-	list_for_each_entry(e, muxmodes, node) {
-		char *m0_entry;
-		int i;
-
-		mux = &e->mux;
-		m0_entry = mux->muxnames[0];
-
-		/* First check for full name in mode0.muxmode format */
-		if (mode0_len)
-			if (strncmp(muxname, m0_entry, mode0_len) ||
-			    (strlen(m0_entry) != mode0_len))
-				continue;
-
-		/* Then check for muxmode only */
-		for (i = 0; i < OMAP_MUX_NR_MODES; i++) {
-			char *mode_cur = mux->muxnames[i];
-
-			if (!mode_cur)
-				continue;
-
-			if (!strcmp(mode_name, mode_cur)) {
-				*found_mux = mux;
-				found++;
-				found_mode = i;
-			}
-		}
-	}
-
-	if (found == 1) {
-		return found_mode;
-	}
-
-	if (found > 1) {
-		pr_err("%s: Multiple signal paths (%i) for %s\n", __func__,
-		       found, muxname);
-		return -EINVAL;
-	}
-
-	return -ENODEV;
-}
-
-int __init omap_mux_get_by_name(const char *muxname,
-			struct omap_mux_partition **found_partition,
-			struct omap_mux **found_mux)
-{
-	struct omap_mux_partition *partition;
-
-	list_for_each_entry(partition, &mux_partitions, node) {
-		struct omap_mux *mux = NULL;
-		int mux_mode = _omap_mux_get_by_name(partition, muxname, &mux);
-		if (mux_mode < 0)
-			continue;
-
-		*found_partition = partition;
-		*found_mux = mux;
-
-		return mux_mode;
-	}
-
-	pr_err("%s: Could not find signal %s\n", __func__, muxname);
-
-	return -ENODEV;
-}
-
-int __init omap_mux_init_signal(const char *muxname, int val)
-{
-	struct omap_mux_partition *partition = NULL;
-	struct omap_mux *mux = NULL;
-	u16 old_mode;
-	int mux_mode;
-
-	mux_mode = omap_mux_get_by_name(muxname, &partition, &mux);
-	if (mux_mode < 0 || !mux)
-		return mux_mode;
-
-	old_mode = omap_mux_read(partition, mux->reg_offset);
-	mux_mode |= val;
-	pr_debug("%s: Setting signal %s 0x%04x -> 0x%04x\n",
-			 __func__, muxname, old_mode, mux_mode);
-	omap_mux_write(partition, mux_mode, mux->reg_offset);
-
-	return 0;
-}
-
-struct omap_hwmod_mux_info * __init
-omap_hwmod_mux_init(struct omap_device_pad *bpads, int nr_pads)
-{
-	struct omap_hwmod_mux_info *hmux;
-	int i, nr_pads_dynamic = 0;
-
-	if (!bpads || nr_pads < 1)
-		return NULL;
-
-	hmux = kzalloc(sizeof(struct omap_hwmod_mux_info), GFP_KERNEL);
-	if (!hmux)
-		goto err1;
-
-	hmux->nr_pads = nr_pads;
-
-	hmux->pads = kzalloc(sizeof(struct omap_device_pad) *
-				nr_pads, GFP_KERNEL);
-	if (!hmux->pads)
-		goto err2;
-
-	for (i = 0; i < hmux->nr_pads; i++) {
-		struct omap_mux_partition *partition;
-		struct omap_device_pad *bpad = &bpads[i], *pad = &hmux->pads[i];
-		struct omap_mux *mux;
-		int mux_mode;
-
-		mux_mode = omap_mux_get_by_name(bpad->name, &partition, &mux);
-		if (mux_mode < 0)
-			goto err3;
-		if (!pad->partition)
-			pad->partition = partition;
-		if (!pad->mux)
-			pad->mux = mux;
-
-		pad->name = kzalloc(strlen(bpad->name) + 1, GFP_KERNEL);
-		if (!pad->name) {
-			int j;
-
-			for (j = i - 1; j >= 0; j--)
-				kfree(hmux->pads[j].name);
-			goto err3;
-		}
-		strcpy(pad->name, bpad->name);
-
-		pad->flags = bpad->flags;
-		pad->enable = bpad->enable;
-		pad->idle = bpad->idle;
-		pad->off = bpad->off;
-
-		if (pad->flags &
-		    (OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP))
-			nr_pads_dynamic++;
-
-		pr_debug("%s: Initialized %s\n", __func__, pad->name);
-	}
-
-	if (!nr_pads_dynamic)
-		return hmux;
-
-	/*
-	 * Add pads that need dynamic muxing into a separate list
-	 */
-
-	hmux->nr_pads_dynamic = nr_pads_dynamic;
-	hmux->pads_dynamic = kzalloc(sizeof(struct omap_device_pad *) *
-					nr_pads_dynamic, GFP_KERNEL);
-	if (!hmux->pads_dynamic) {
-		pr_err("%s: Could not allocate dynamic pads\n", __func__);
-		return hmux;
-	}
-
-	nr_pads_dynamic = 0;
-	for (i = 0; i < hmux->nr_pads; i++) {
-		struct omap_device_pad *pad = &hmux->pads[i];
-
-		if (pad->flags &
-		    (OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP)) {
-			pr_debug("%s: pad %s tagged dynamic\n",
-					__func__, pad->name);
-			hmux->pads_dynamic[nr_pads_dynamic] = pad;
-			nr_pads_dynamic++;
-		}
-	}
-
-	return hmux;
-
-err3:
-	kfree(hmux->pads);
-err2:
-	kfree(hmux);
-err1:
-	pr_err("%s: Could not allocate device mux entry\n", __func__);
-
-	return NULL;
-}
-
-/**
- * omap_hwmod_mux_scan_wakeups - omap hwmod scan wakeup pads
- * @hmux: Pads for a hwmod
- * @mpu_irqs: MPU irq array for a hwmod
- *
- * Scans the wakeup status of pads for a single hwmod.  If an irq
- * array is defined for this mux, the parser will call the registered
- * ISRs for corresponding pads, otherwise the parser will stop at the
- * first wakeup active pad and return.  Returns true if there is a
- * pending and non-served wakeup event for the mux, otherwise false.
- */
-static bool omap_hwmod_mux_scan_wakeups(struct omap_hwmod_mux_info *hmux,
-		struct omap_hwmod_irq_info *mpu_irqs)
-{
-	int i, irq;
-	unsigned int val;
-	u32 handled_irqs = 0;
-
-	for (i = 0; i < hmux->nr_pads_dynamic; i++) {
-		struct omap_device_pad *pad = hmux->pads_dynamic[i];
-
-		if (!(pad->flags & OMAP_DEVICE_PAD_WAKEUP) ||
-		    !(pad->idle & OMAP_WAKEUP_EN))
-			continue;
-
-		val = omap_mux_read(pad->partition, pad->mux->reg_offset);
-		if (!(val & OMAP_WAKEUP_EVENT))
-			continue;
-
-		if (!hmux->irqs)
-			return true;
-
-		irq = hmux->irqs[i];
-		/* make sure we only handle each irq once */
-		if (handled_irqs & 1 << irq)
-			continue;
-
-		handled_irqs |= 1 << irq;
-
-		generic_handle_irq(mpu_irqs[irq].irq);
-	}
-
-	return false;
-}
-
-/**
- * _omap_hwmod_mux_handle_irq - Process wakeup events for a single hwmod
- *
- * Checks a single hwmod for every wakeup capable pad to see if there is an
- * active wakeup event. If this is the case, call the corresponding ISR.
- */
-static int _omap_hwmod_mux_handle_irq(struct omap_hwmod *oh, void *data)
-{
-	if (!oh->mux || !oh->mux->enabled)
-		return 0;
-	if (omap_hwmod_mux_scan_wakeups(oh->mux, oh->mpu_irqs))
-		generic_handle_irq(oh->mpu_irqs[0].irq);
-	return 0;
-}
-
-/**
- * omap_hwmod_mux_handle_irq - Process pad wakeup irqs.
- *
- * Calls a function for each registered omap_hwmod to check
- * pad wakeup statuses.
- */
-static irqreturn_t omap_hwmod_mux_handle_irq(int irq, void *unused)
-{
-	omap_hwmod_for_each(_omap_hwmod_mux_handle_irq, NULL);
-	return IRQ_HANDLED;
-}
-
-/* Assumes the calling function takes care of locking */
-void omap_hwmod_mux(struct omap_hwmod_mux_info *hmux, u8 state)
-{
-	int i;
-
-	/* Runtime idling of dynamic pads */
-	if (state == _HWMOD_STATE_IDLE && hmux->enabled) {
-		for (i = 0; i < hmux->nr_pads_dynamic; i++) {
-			struct omap_device_pad *pad = hmux->pads_dynamic[i];
-			int val = -EINVAL;
-
-			val = pad->idle;
-			omap_mux_write(pad->partition, val,
-					pad->mux->reg_offset);
-		}
-
-		return;
-	}
-
-	/* Runtime enabling of dynamic pads */
-	if ((state == _HWMOD_STATE_ENABLED) && hmux->pads_dynamic
-					&& hmux->enabled) {
-		for (i = 0; i < hmux->nr_pads_dynamic; i++) {
-			struct omap_device_pad *pad = hmux->pads_dynamic[i];
-			int val = -EINVAL;
-
-			val = pad->enable;
-			omap_mux_write(pad->partition, val,
-					pad->mux->reg_offset);
-		}
-
-		return;
-	}
-
-	/* Enabling or disabling of all pads */
-	for (i = 0; i < hmux->nr_pads; i++) {
-		struct omap_device_pad *pad = &hmux->pads[i];
-		int flags, val = -EINVAL;
-
-		flags = pad->flags;
-
-		switch (state) {
-		case _HWMOD_STATE_ENABLED:
-			val = pad->enable;
-			pr_debug("%s: Enabling %s %x\n", __func__,
-					pad->name, val);
-			break;
-		case _HWMOD_STATE_DISABLED:
-			/* Use safe mode unless OMAP_DEVICE_PAD_REMUX */
-			if (flags & OMAP_DEVICE_PAD_REMUX)
-				val = pad->off;
-			else
-				val = OMAP_MUX_MODE7;
-			pr_debug("%s: Disabling %s %x\n", __func__,
-					pad->name, val);
-			break;
-		default:
-			/* Nothing to be done */
-			break;
-		}
-
-		if (val >= 0) {
-			omap_mux_write(pad->partition, val,
-					pad->mux->reg_offset);
-			pad->flags = flags;
-		}
-	}
-
-	if (state == _HWMOD_STATE_ENABLED)
-		hmux->enabled = true;
-	else
-		hmux->enabled = false;
-}
-
-#ifdef CONFIG_DEBUG_FS
-
-#define OMAP_MUX_MAX_NR_FLAGS	10
-#define OMAP_MUX_TEST_FLAG(val, mask)				\
-	if (((val) & (mask)) == (mask)) {			\
-		i++;						\
-		flags[i] =  #mask;				\
-	}
-
-/* REVISIT: Add checking for non-optimal mux settings */
-static inline void omap_mux_decode(struct seq_file *s, u16 val)
-{
-	char *flags[OMAP_MUX_MAX_NR_FLAGS];
-	char mode[sizeof("OMAP_MUX_MODE") + 1];
-	int i = -1;
-
-	sprintf(mode, "OMAP_MUX_MODE%d", val & 0x7);
-	i++;
-	flags[i] = mode;
-
-	OMAP_MUX_TEST_FLAG(val, OMAP_PIN_OFF_WAKEUPENABLE);
-	if (val & OMAP_OFF_EN) {
-		if (!(val & OMAP_OFFOUT_EN)) {
-			if (!(val & OMAP_OFF_PULL_UP)) {
-				OMAP_MUX_TEST_FLAG(val,
-					OMAP_PIN_OFF_INPUT_PULLDOWN);
-			} else {
-				OMAP_MUX_TEST_FLAG(val,
-					OMAP_PIN_OFF_INPUT_PULLUP);
-			}
-		} else {
-			if (!(val & OMAP_OFFOUT_VAL)) {
-				OMAP_MUX_TEST_FLAG(val,
-					OMAP_PIN_OFF_OUTPUT_LOW);
-			} else {
-				OMAP_MUX_TEST_FLAG(val,
-					OMAP_PIN_OFF_OUTPUT_HIGH);
-			}
-		}
-	}
-
-	if (val & OMAP_INPUT_EN) {
-		if (val & OMAP_PULL_ENA) {
-			if (!(val & OMAP_PULL_UP)) {
-				OMAP_MUX_TEST_FLAG(val,
-					OMAP_PIN_INPUT_PULLDOWN);
-			} else {
-				OMAP_MUX_TEST_FLAG(val, OMAP_PIN_INPUT_PULLUP);
-			}
-		} else {
-			OMAP_MUX_TEST_FLAG(val, OMAP_PIN_INPUT);
-		}
-	} else {
-		i++;
-		flags[i] = "OMAP_PIN_OUTPUT";
-	}
-
-	do {
-		seq_printf(s, "%s", flags[i]);
-		if (i > 0)
-			seq_printf(s, " | ");
-	} while (i-- > 0);
-}
-
-#define OMAP_MUX_DEFNAME_LEN	32
-
-static int omap_mux_dbg_board_show(struct seq_file *s, void *unused)
-{
-	struct omap_mux_partition *partition = s->private;
-	struct omap_mux_entry *e;
-	u8 omap_gen = omap_rev() >> 28;
-
-	list_for_each_entry(e, &partition->muxmodes, node) {
-		struct omap_mux *m = &e->mux;
-		char m0_def[OMAP_MUX_DEFNAME_LEN];
-		char *m0_name = m->muxnames[0];
-		u16 val;
-		int i, mode;
-
-		if (!m0_name)
-			continue;
-
-		/* REVISIT: Needs to be updated if mode0 names get longer */
-		for (i = 0; i < OMAP_MUX_DEFNAME_LEN; i++) {
-			if (m0_name[i] == '\0') {
-				m0_def[i] = m0_name[i];
-				break;
-			}
-			m0_def[i] = toupper(m0_name[i]);
-		}
-		val = omap_mux_read(partition, m->reg_offset);
-		mode = val & OMAP_MUX_MODE7;
-		if (mode != 0)
-			seq_printf(s, "/* %s */\n", m->muxnames[mode]);
-
-		/*
-		 * XXX: Might be revisited to support differences across
-		 * same OMAP generation.
-		 */
-		seq_printf(s, "OMAP%d_MUX(%s, ", omap_gen, m0_def);
-		omap_mux_decode(s, val);
-		seq_printf(s, "),\n");
-	}
-
-	return 0;
-}
-
-static int omap_mux_dbg_board_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, omap_mux_dbg_board_show, inode->i_private);
-}
-
-static const struct file_operations omap_mux_dbg_board_fops = {
-	.open		= omap_mux_dbg_board_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
-
-static struct omap_mux_partition *omap_mux_get_partition(struct omap_mux *mux)
-{
-	struct omap_mux_partition *partition;
-
-	list_for_each_entry(partition, &mux_partitions, node) {
-		struct list_head *muxmodes = &partition->muxmodes;
-		struct omap_mux_entry *e;
-
-		list_for_each_entry(e, muxmodes, node) {
-			struct omap_mux *m = &e->mux;
-
-			if (m == mux)
-				return partition;
-		}
-	}
-
-	return NULL;
-}
-
-static int omap_mux_dbg_signal_show(struct seq_file *s, void *unused)
-{
-	struct omap_mux *m = s->private;
-	struct omap_mux_partition *partition;
-	const char *none = "NA";
-	u16 val;
-	int mode;
-
-	partition = omap_mux_get_partition(m);
-	if (!partition)
-		return 0;
-
-	val = omap_mux_read(partition, m->reg_offset);
-	mode = val & OMAP_MUX_MODE7;
-
-	seq_printf(s, "name: %s.%s (0x%08x/0x%03x = 0x%04x), b %s, t %s\n",
-			m->muxnames[0], m->muxnames[mode],
-			partition->phys + m->reg_offset, m->reg_offset, val,
-			m->balls[0] ? m->balls[0] : none,
-			m->balls[1] ? m->balls[1] : none);
-	seq_printf(s, "mode: ");
-	omap_mux_decode(s, val);
-	seq_printf(s, "\n");
-	seq_printf(s, "signals: %s | %s | %s | %s | %s | %s | %s | %s\n",
-			m->muxnames[0] ? m->muxnames[0] : none,
-			m->muxnames[1] ? m->muxnames[1] : none,
-			m->muxnames[2] ? m->muxnames[2] : none,
-			m->muxnames[3] ? m->muxnames[3] : none,
-			m->muxnames[4] ? m->muxnames[4] : none,
-			m->muxnames[5] ? m->muxnames[5] : none,
-			m->muxnames[6] ? m->muxnames[6] : none,
-			m->muxnames[7] ? m->muxnames[7] : none);
-
-	return 0;
-}
-
-#define OMAP_MUX_MAX_ARG_CHAR  7
-
-static ssize_t omap_mux_dbg_signal_write(struct file *file,
-					 const char __user *user_buf,
-					 size_t count, loff_t *ppos)
-{
-	struct seq_file *seqf;
-	struct omap_mux *m;
-	u16 val;
-	int ret;
-	struct omap_mux_partition *partition;
-
-	if (count > OMAP_MUX_MAX_ARG_CHAR)
-		return -EINVAL;
-
-	ret = kstrtou16_from_user(user_buf, count, 0x10, &val);
-	if (ret < 0)
-		return ret;
-
-	seqf = file->private_data;
-	m = seqf->private;
-
-	partition = omap_mux_get_partition(m);
-	if (!partition)
-		return -ENODEV;
-
-	omap_mux_write(partition, val, m->reg_offset);
-	*ppos += count;
-
-	return count;
-}
-
-static int omap_mux_dbg_signal_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, omap_mux_dbg_signal_show, inode->i_private);
-}
-
-static const struct file_operations omap_mux_dbg_signal_fops = {
-	.open		= omap_mux_dbg_signal_open,
-	.read		= seq_read,
-	.write		= omap_mux_dbg_signal_write,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
-
-static struct dentry *mux_dbg_dir;
-
-static void __init omap_mux_dbg_create_entry(
-				struct omap_mux_partition *partition,
-				struct dentry *mux_dbg_dir)
-{
-	struct omap_mux_entry *e;
-
-	list_for_each_entry(e, &partition->muxmodes, node) {
-		struct omap_mux *m = &e->mux;
-
-		(void)debugfs_create_file(m->muxnames[0], S_IWUSR | S_IRUGO,
-					  mux_dbg_dir, m,
-					  &omap_mux_dbg_signal_fops);
-	}
-}
-
-static void __init omap_mux_dbg_init(void)
-{
-	struct omap_mux_partition *partition;
-	static struct dentry *mux_dbg_board_dir;
-
-	mux_dbg_dir = debugfs_create_dir("omap_mux", NULL);
-	if (!mux_dbg_dir)
-		return;
-
-	mux_dbg_board_dir = debugfs_create_dir("board", mux_dbg_dir);
-	if (!mux_dbg_board_dir)
-		return;
-
-	list_for_each_entry(partition, &mux_partitions, node) {
-		omap_mux_dbg_create_entry(partition, mux_dbg_dir);
-		(void)debugfs_create_file(partition->name, S_IRUGO,
-					  mux_dbg_board_dir, partition,
-					  &omap_mux_dbg_board_fops);
-	}
-}
-
-#else
-static inline void omap_mux_dbg_init(void)
-{
-}
-#endif	/* CONFIG_DEBUG_FS */
-
-static void __init omap_mux_free_names(struct omap_mux *m)
-{
-	int i;
-
-	for (i = 0; i < OMAP_MUX_NR_MODES; i++)
-		kfree(m->muxnames[i]);
-
-#ifdef CONFIG_DEBUG_FS
-	for (i = 0; i < OMAP_MUX_NR_SIDES; i++)
-		kfree(m->balls[i]);
-#endif
-
-}
-
-/* Free all data except for GPIO pins unless CONFIG_DEBUG_FS is set */
-int __init omap_mux_late_init(void)
-{
-	struct omap_mux_partition *partition;
-	int ret;
-
-	list_for_each_entry(partition, &mux_partitions, node) {
-		struct omap_mux_entry *e, *tmp;
-		list_for_each_entry_safe(e, tmp, &partition->muxmodes, node) {
-			struct omap_mux *m = &e->mux;
-			u16 mode = omap_mux_read(partition, m->reg_offset);
-
-			if (OMAP_MODE_GPIO(partition, mode))
-				continue;
-
-#ifndef CONFIG_DEBUG_FS
-			mutex_lock(&muxmode_mutex);
-			list_del(&e->node);
-			mutex_unlock(&muxmode_mutex);
-			omap_mux_free_names(m);
-			kfree(m);
-#endif
-		}
-	}
-
-	omap_mux_dbg_init();
-
-	/* see pinctrl-single-omap for the wake-up interrupt handling */
-	if (of_have_populated_dt())
-		return 0;
-
-	ret = request_irq(omap_prcm_event_to_irq("io"),
-		omap_hwmod_mux_handle_irq, IRQF_SHARED | IRQF_NO_SUSPEND,
-			"hwmod_io", omap_mux_late_init);
-
-	if (ret)
-		pr_warn("mux: Failed to setup hwmod io irq %d\n", ret);
-
-	return 0;
-}
-
-static void __init omap_mux_package_fixup(struct omap_mux *p,
-					struct omap_mux *superset)
-{
-	while (p->reg_offset !=  OMAP_MUX_TERMINATOR) {
-		struct omap_mux *s = superset;
-		int found = 0;
-
-		while (s->reg_offset != OMAP_MUX_TERMINATOR) {
-			if (s->reg_offset == p->reg_offset) {
-				*s = *p;
-				found++;
-				break;
-			}
-			s++;
-		}
-		if (!found)
-			pr_err("%s: Unknown entry offset 0x%x\n", __func__,
-			       p->reg_offset);
-		p++;
-	}
-}
-
-#ifdef CONFIG_DEBUG_FS
-
-static void __init omap_mux_package_init_balls(struct omap_ball *b,
-				struct omap_mux *superset)
-{
-	while (b->reg_offset != OMAP_MUX_TERMINATOR) {
-		struct omap_mux *s = superset;
-		int found = 0;
-
-		while (s->reg_offset != OMAP_MUX_TERMINATOR) {
-			if (s->reg_offset == b->reg_offset) {
-				s->balls[0] = b->balls[0];
-				s->balls[1] = b->balls[1];
-				found++;
-				break;
-			}
-			s++;
-		}
-		if (!found)
-			pr_err("%s: Unknown ball offset 0x%x\n", __func__,
-			       b->reg_offset);
-		b++;
-	}
-}
-
-#else	/* CONFIG_DEBUG_FS */
-
-static inline void omap_mux_package_init_balls(struct omap_ball *b,
-					struct omap_mux *superset)
-{
-}
-
-#endif	/* CONFIG_DEBUG_FS */
-
-static int __init omap_mux_setup(char *options)
-{
-	if (!options)
-		return 0;
-
-	omap_mux_options = options;
-
-	return 1;
-}
-__setup("omap_mux=", omap_mux_setup);
-
-/*
- * Note that the omap_mux=some.signal1=0x1234,some.signal2=0x1234
- * cmdline options only override the bootloader values.
- * During development, please enable CONFIG_DEBUG_FS, and use the
- * signal specific entries under debugfs.
- */
-static void __init omap_mux_set_cmdline_signals(void)
-{
-	char *options, *next_opt, *token;
-
-	if (!omap_mux_options)
-		return;
-
-	options = kstrdup(omap_mux_options, GFP_KERNEL);
-	if (!options)
-		return;
-
-	next_opt = options;
-
-	while ((token = strsep(&next_opt, ",")) != NULL) {
-		char *keyval, *name;
-		u16 val;
-
-		keyval = token;
-		name = strsep(&keyval, "=");
-		if (name) {
-			int res;
-
-			res = kstrtou16(keyval, 0x10, &val);
-			if (res < 0)
-				continue;
-
-			omap_mux_init_signal(name, (u16)val);
-		}
-	}
-
-	kfree(options);
-}
-
-static int __init omap_mux_copy_names(struct omap_mux *src,
-				      struct omap_mux *dst)
-{
-	int i;
-
-	for (i = 0; i < OMAP_MUX_NR_MODES; i++) {
-		if (src->muxnames[i]) {
-			dst->muxnames[i] = kstrdup(src->muxnames[i],
-						   GFP_KERNEL);
-			if (!dst->muxnames[i])
-				goto free;
-		}
-	}
-
-#ifdef CONFIG_DEBUG_FS
-	for (i = 0; i < OMAP_MUX_NR_SIDES; i++) {
-		if (src->balls[i]) {
-			dst->balls[i] = kstrdup(src->balls[i], GFP_KERNEL);
-			if (!dst->balls[i])
-				goto free;
-		}
-	}
-#endif
-
-	return 0;
-
-free:
-	omap_mux_free_names(dst);
-	return -ENOMEM;
-
-}
-
-#endif	/* CONFIG_OMAP_MUX */
-
-static struct omap_mux *omap_mux_get_by_gpio(
-				struct omap_mux_partition *partition,
-				int gpio)
-{
-	struct omap_mux_entry *e;
-	struct omap_mux *ret = NULL;
-
-	list_for_each_entry(e, &partition->muxmodes, node) {
-		struct omap_mux *m = &e->mux;
-		if (m->gpio == gpio) {
-			ret = m;
-			break;
-		}
-	}
-
-	return ret;
-}
-
-/* Needed for dynamic muxing of GPIO pins for off-idle */
-u16 omap_mux_get_gpio(int gpio)
-{
-	struct omap_mux_partition *partition;
-	struct omap_mux *m = NULL;
-
-	list_for_each_entry(partition, &mux_partitions, node) {
-		m = omap_mux_get_by_gpio(partition, gpio);
-		if (m)
-			return omap_mux_read(partition, m->reg_offset);
-	}
-
-	if (!m || m->reg_offset == OMAP_MUX_TERMINATOR)
-		pr_err("%s: Could not get gpio%i\n", __func__, gpio);
-
-	return OMAP_MUX_TERMINATOR;
-}
-
-/* Needed for dynamic muxing of GPIO pins for off-idle */
-void omap_mux_set_gpio(u16 val, int gpio)
-{
-	struct omap_mux_partition *partition;
-	struct omap_mux *m = NULL;
-
-	list_for_each_entry(partition, &mux_partitions, node) {
-		m = omap_mux_get_by_gpio(partition, gpio);
-		if (m) {
-			omap_mux_write(partition, val, m->reg_offset);
-			return;
-		}
-	}
-
-	if (!m || m->reg_offset == OMAP_MUX_TERMINATOR)
-		pr_err("%s: Could not set gpio%i\n", __func__, gpio);
-}
-
-static struct omap_mux * __init omap_mux_list_add(
-					struct omap_mux_partition *partition,
-					struct omap_mux *src)
-{
-	struct omap_mux_entry *entry;
-	struct omap_mux *m;
-
-	entry = kzalloc(sizeof(struct omap_mux_entry), GFP_KERNEL);
-	if (!entry)
-		return NULL;
-
-	m = &entry->mux;
-	entry->mux = *src;
-
-#ifdef CONFIG_OMAP_MUX
-	if (omap_mux_copy_names(src, m)) {
-		kfree(entry);
-		return NULL;
-	}
-#endif
-
-	mutex_lock(&muxmode_mutex);
-	list_add_tail(&entry->node, &partition->muxmodes);
-	mutex_unlock(&muxmode_mutex);
-
-	return m;
-}
-
-/*
- * Note if CONFIG_OMAP_MUX is not selected, we will only initialize
- * the GPIO to mux offset mapping that is needed for dynamic muxing
- * of GPIO pins for off-idle.
- */
-static void __init omap_mux_init_list(struct omap_mux_partition *partition,
-				      struct omap_mux *superset)
-{
-	while (superset->reg_offset !=  OMAP_MUX_TERMINATOR) {
-		struct omap_mux *entry;
-
-#ifdef CONFIG_OMAP_MUX
-		if (!superset->muxnames[0]) {
-			superset++;
-			continue;
-		}
-#else
-		/* Skip pins that are not muxed as GPIO by bootloader */
-		if (!OMAP_MODE_GPIO(partition, omap_mux_read(partition,
-				    superset->reg_offset))) {
-			superset++;
-			continue;
-		}
-#endif
-
-		entry = omap_mux_list_add(partition, superset);
-		if (!entry) {
-			pr_err("%s: Could not add entry\n", __func__);
-			return;
-		}
-		superset++;
-	}
-}
-
-#ifdef CONFIG_OMAP_MUX
-
-static void omap_mux_init_package(struct omap_mux *superset,
-				  struct omap_mux *package_subset,
-				  struct omap_ball *package_balls)
-{
-	if (package_subset)
-		omap_mux_package_fixup(package_subset, superset);
-	if (package_balls)
-		omap_mux_package_init_balls(package_balls, superset);
-}
-
-static void __init omap_mux_init_signals(struct omap_mux_partition *partition,
-					 struct omap_board_mux *board_mux)
-{
-	omap_mux_set_cmdline_signals();
-	omap_mux_write_array(partition, board_mux);
-}
-
-#else
-
-static void omap_mux_init_package(struct omap_mux *superset,
-				  struct omap_mux *package_subset,
-				  struct omap_ball *package_balls)
-{
-}
-
-static void __init omap_mux_init_signals(struct omap_mux_partition *partition,
-					 struct omap_board_mux *board_mux)
-{
-}
-
-#endif
-
-static u32 mux_partitions_cnt;
-
-int __init omap_mux_init(const char *name, u32 flags,
-			 u32 mux_pbase, u32 mux_size,
-			 struct omap_mux *superset,
-			 struct omap_mux *package_subset,
-			 struct omap_board_mux *board_mux,
-			 struct omap_ball *package_balls)
-{
-	struct omap_mux_partition *partition;
-
-	partition = kzalloc(sizeof(struct omap_mux_partition), GFP_KERNEL);
-	if (!partition)
-		return -ENOMEM;
-
-	partition->name = name;
-	partition->flags = flags;
-	partition->gpio = flags & OMAP_MUX_MODE7;
-	partition->size = mux_size;
-	partition->phys = mux_pbase;
-	partition->base = ioremap(mux_pbase, mux_size);
-	if (!partition->base) {
-		pr_err("%s: Could not ioremap mux partition at 0x%08x\n",
-			__func__, partition->phys);
-		kfree(partition);
-		return -ENODEV;
-	}
-
-	INIT_LIST_HEAD(&partition->muxmodes);
-
-	list_add_tail(&partition->node, &mux_partitions);
-	mux_partitions_cnt++;
-	pr_info("%s: Add partition: #%d: %s, flags: %x\n", __func__,
-		mux_partitions_cnt, partition->name, partition->flags);
-
-	omap_mux_init_package(superset, package_subset, package_balls);
-	omap_mux_init_list(partition, superset);
-	omap_mux_init_signals(partition, board_mux);
-
-	return 0;
-}
-

arch/arm/mach-omap2/mux.h

@@ -1,352 +0,0 @@
-/*
- * Copyright (C) 2009 Nokia
- * Copyright (C) 2009-2010 Texas Instruments
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include "mux34xx.h"
-
-#define OMAP_MUX_TERMINATOR	0xffff
-
-/* 34xx mux mode options for each pin. See TRM for options */
-#define OMAP_MUX_MODE0      0
-#define OMAP_MUX_MODE1      1
-#define OMAP_MUX_MODE2      2
-#define OMAP_MUX_MODE3      3
-#define OMAP_MUX_MODE4      4
-#define OMAP_MUX_MODE5      5
-#define OMAP_MUX_MODE6      6
-#define OMAP_MUX_MODE7      7
-
-/* 24xx/34xx mux bit defines */
-#define OMAP_PULL_ENA			(1 << 3)
-#define OMAP_PULL_UP			(1 << 4)
-#define OMAP_ALTELECTRICALSEL		(1 << 5)
-
-/* omap3/4/5 specific mux bit defines */
-#define OMAP_INPUT_EN			(1 << 8)
-#define OMAP_OFF_EN			(1 << 9)
-#define OMAP_OFFOUT_EN			(1 << 10)
-#define OMAP_OFFOUT_VAL			(1 << 11)
-#define OMAP_OFF_PULL_EN		(1 << 12)
-#define OMAP_OFF_PULL_UP		(1 << 13)
-#define OMAP_WAKEUP_EN			(1 << 14)
-#define OMAP_WAKEUP_EVENT		(1 << 15)
-
-/* Active pin states */
-#define OMAP_PIN_OUTPUT			0
-#define OMAP_PIN_INPUT			OMAP_INPUT_EN
-#define OMAP_PIN_INPUT_PULLUP		(OMAP_PULL_ENA | OMAP_INPUT_EN \
-						| OMAP_PULL_UP)
-#define OMAP_PIN_INPUT_PULLDOWN		(OMAP_PULL_ENA | OMAP_INPUT_EN)
-
-/* Off mode states */
-#define OMAP_PIN_OFF_NONE		0
-#define OMAP_PIN_OFF_OUTPUT_HIGH	(OMAP_OFF_EN | OMAP_OFFOUT_EN \
-						| OMAP_OFFOUT_VAL)
-#define OMAP_PIN_OFF_OUTPUT_LOW		(OMAP_OFF_EN | OMAP_OFFOUT_EN)
-#define OMAP_PIN_OFF_INPUT_PULLUP	(OMAP_OFF_EN | OMAP_OFF_PULL_EN \
-						| OMAP_OFF_PULL_UP)
-#define OMAP_PIN_OFF_INPUT_PULLDOWN	(OMAP_OFF_EN | OMAP_OFF_PULL_EN)
-#define OMAP_PIN_OFF_WAKEUPENABLE	OMAP_WAKEUP_EN
-
-#define OMAP_MODE_GPIO(partition, x)	(((x) & OMAP_MUX_MODE7) == \
-					  partition->gpio)
-#define OMAP_MODE_UART(x)	(((x) & OMAP_MUX_MODE7) == OMAP_MUX_MODE0)
-
-/* Flags for omapX_mux_init */
-#define OMAP_PACKAGE_MASK		0xffff
-#define OMAP_PACKAGE_CBP		6		/* 515-pin 0.40 0.50 */
-#define OMAP_PACKAGE_CUS		5		/* 423-pin 0.65 */
-#define OMAP_PACKAGE_CBB		4		/* 515-pin 0.40 0.50 */
-#define OMAP_PACKAGE_CBC		3		/* 515-pin 0.50 0.65 */
-
-#define OMAP_MUX_NR_MODES		8		/* Available modes */
-#define OMAP_MUX_NR_SIDES		2		/* Bottom & top */
-
-/*
- * omap_mux_init flags definition:
- *
- * OMAP_GPIO_MUX_MODE, bits 0-2: gpio muxing mode, same like pad control
- *      register which includes values from 0-7.
- * OMAP_MUX_REG_8BIT: Ensure that access to padconf is done in 8 bits.
- * The default value is 16 bits.
- */
-#define OMAP_MUX_GPIO_IN_MODE0		OMAP_MUX_MODE0
-#define OMAP_MUX_GPIO_IN_MODE1		OMAP_MUX_MODE1
-#define OMAP_MUX_GPIO_IN_MODE2		OMAP_MUX_MODE2
-#define OMAP_MUX_GPIO_IN_MODE3		OMAP_MUX_MODE3
-#define OMAP_MUX_GPIO_IN_MODE4		OMAP_MUX_MODE4
-#define OMAP_MUX_GPIO_IN_MODE5		OMAP_MUX_MODE5
-#define OMAP_MUX_GPIO_IN_MODE6		OMAP_MUX_MODE6
-#define OMAP_MUX_GPIO_IN_MODE7		OMAP_MUX_MODE7
-#define OMAP_MUX_REG_8BIT		(1 << 3)
-
-/**
- * struct omap_board_data - board specific device data
- * @id: instance id
- * @flags: additional flags for platform init code
- * @pads: array of device specific pads
- * @pads_cnt: ARRAY_SIZE() of pads
- */
-struct omap_board_data {
-	int			id;
-	u32			flags;
-	struct omap_device_pad	*pads;
-	int			pads_cnt;
-};
-
-/**
- * struct mux_partition - contain partition related information
- * @name: name of the current partition
- * @flags: flags specific to this partition
- * @gpio: gpio mux mode
- * @phys: physical address
- * @size: partition size
- * @base: virtual address after ioremap
- * @muxmodes: list of nodes that belong to a partition
- * @node: list node for the partitions linked list
- */
-struct omap_mux_partition {
-	const char		*name;
-	u32			flags;
-	u32			gpio;
-	u32			phys;
-	u32			size;
-	void __iomem		*base;
-	struct list_head	muxmodes;
-	struct list_head	node;
-};
-
-/**
- * struct omap_mux - data for omap mux register offset and it's value
- * @reg_offset:	mux register offset from the mux base
- * @gpio:	GPIO number
- * @muxnames:	available signal modes for a ball
- * @balls:	available balls on the package
- */
-struct omap_mux {
-	u16	reg_offset;
-	u16	gpio;
-#ifdef CONFIG_OMAP_MUX
-	char	*muxnames[OMAP_MUX_NR_MODES];
-#ifdef CONFIG_DEBUG_FS
-	char	*balls[OMAP_MUX_NR_SIDES];
-#endif
-#endif
-};
-
-/**
- * struct omap_ball - data for balls on omap package
- * @reg_offset:	mux register offset from the mux base
- * @balls:	available balls on the package
- */
-struct omap_ball {
-	u16	reg_offset;
-	char	*balls[OMAP_MUX_NR_SIDES];
-};
-
-/**
- * struct omap_board_mux - data for initializing mux registers
- * @reg_offset:	mux register offset from the mux base
- * @mux_value:	desired mux value to set
- */
-struct omap_board_mux {
-	u16	reg_offset;
-	u16	value;
-};
-
-#define OMAP_DEVICE_PAD_REMUX		BIT(1)	/* Dynamically remux a pad,
-						   needs enable, idle and off
-						   values */
-#define OMAP_DEVICE_PAD_WAKEUP		BIT(0)	/* Pad is wake-up capable */
-
-/**
- * struct omap_device_pad - device specific pad configuration
- * @name:		signal name
- * @flags:		pad specific runtime flags
- * @enable:		runtime value for a pad
- * @idle:		idle value for a pad
- * @off:		off value for a pad, defaults to safe mode
- * @partition:		mux partition
- * @mux:		mux register
- */
-struct omap_device_pad {
-	char				*name;
-	u8				flags;
-	u16				enable;
-	u16				idle;
-	u16				off;
-	struct omap_mux_partition	*partition;
-	struct omap_mux			*mux;
-};
-
-struct omap_hwmod_mux_info;
-
-#define OMAP_MUX_STATIC(signal, mode)					\
-{									\
-	.name	= (signal),						\
-	.enable	= (mode),						\
-}
-
-#if defined(CONFIG_OMAP_MUX)
-
-/**
- * omap_mux_init_gpio - initialize a signal based on the GPIO number
- * @gpio:		GPIO number
- * @val:		Options for the mux register value
- */
-int omap_mux_init_gpio(int gpio, int val);
-
-/**
- * omap_mux_init_signal - initialize a signal based on the signal name
- * @muxname:		Mux name in mode0_name.signal_name format
- * @val:		Options for the mux register value
- */
-int omap_mux_init_signal(const char *muxname, int val);
-
-/**
- * omap_hwmod_mux_init - initialize hwmod specific mux data
- * @bpads:		Board specific device signal names
- * @nr_pads:		Number of signal names for the device
- */
-extern struct omap_hwmod_mux_info *
-omap_hwmod_mux_init(struct omap_device_pad *bpads, int nr_pads);
-
-/**
- * omap_hwmod_mux - omap hwmod specific pin muxing
- * @hmux:		Pads for a hwmod
- * @state:		Desired _HWMOD_STATE
- *
- * Called only from omap_hwmod.c, do not use.
- */
-void omap_hwmod_mux(struct omap_hwmod_mux_info *hmux, u8 state);
-
-int omap_mux_get_by_name(const char *muxname,
-		struct omap_mux_partition **found_partition,
-		struct omap_mux **found_mux);
-#else
-
-static inline int omap_mux_get_by_name(const char *muxname,
-		struct omap_mux_partition **found_partition,
-		struct omap_mux **found_mux)
-{
-	return 0;
-}
-
-static inline int omap_mux_init_gpio(int gpio, int val)
-{
-	return 0;
-}
-static inline int omap_mux_init_signal(char *muxname, int val)
-{
-	return 0;
-}
-
-static inline struct omap_hwmod_mux_info *
-omap_hwmod_mux_init(struct omap_device_pad *bpads, int nr_pads)
-{
-	return NULL;
-}
-
-static inline void omap_hwmod_mux(struct omap_hwmod_mux_info *hmux, u8 state)
-{
-}
-
-static struct omap_board_mux *board_mux __maybe_unused;
-
-#endif
-
-/**
- * omap_mux_get_gpio() - get mux register value based on GPIO number
- * @gpio:		GPIO number
- *
- */
-u16 omap_mux_get_gpio(int gpio);
-
-/**
- * omap_mux_set_gpio() - set mux register value based on GPIO number
- * @val:		New mux register value
- * @gpio:		GPIO number
- *
- */
-void omap_mux_set_gpio(u16 val, int gpio);
-
-/**
- * omap_mux_get() - get a mux partition by name
- * @name:		Name of the mux partition
- *
- */
-struct omap_mux_partition *omap_mux_get(const char *name);
-
-/**
- * omap_mux_read() - read mux register
- * @partition:		Mux partition
- * @mux_offset:		Offset of the mux register
- *
- */
-u16 omap_mux_read(struct omap_mux_partition *p, u16 mux_offset);
-
-/**
- * omap_mux_write() - write mux register
- * @partition:		Mux partition
- * @val:		New mux register value
- * @mux_offset:		Offset of the mux register
- *
- * This should be only needed for dynamic remuxing of non-gpio signals.
- */
-void omap_mux_write(struct omap_mux_partition *p, u16 val, u16 mux_offset);
-
-/**
- * omap_mux_write_array() - write an array of mux registers
- * @partition:		Mux partition
- * @board_mux:		Array of mux registers terminated by MAP_MUX_TERMINATOR
- *
- * This should be only needed for dynamic remuxing of non-gpio signals.
- */
-void omap_mux_write_array(struct omap_mux_partition *p,
-			  struct omap_board_mux *board_mux);
-
-/**
- * omap2420_mux_init() - initialize mux system with board specific set
- * @board_mux:		Board specific mux table
- * @flags:		OMAP package type used for the board
- */
-int omap2420_mux_init(struct omap_board_mux *board_mux, int flags);
-
-/**
- * omap2430_mux_init() - initialize mux system with board specific set
- * @board_mux:		Board specific mux table
- * @flags:		OMAP package type used for the board
- */
-int omap2430_mux_init(struct omap_board_mux *board_mux, int flags);
-
-/**
- * omap3_mux_init() - initialize mux system with board specific set
- * @board_mux:		Board specific mux table
- * @flags:		OMAP package type used for the board
- */
-int omap3_mux_init(struct omap_board_mux *board_mux, int flags);
-
-/**
- * omap4_mux_init() - initialize mux system with board specific set
- * @board_subset:	Board specific mux table
- * @board_wkup_subset:	Board specific mux table for wakeup instance
- * @flags:		OMAP package type used for the board
- */
-int omap4_mux_init(struct omap_board_mux *board_subset,
-	struct omap_board_mux *board_wkup_subset, int flags);
-
-/**
- * omap_mux_init - private mux init function, do not call
- */
-int omap_mux_init(const char *name, u32 flags,
-		  u32 mux_pbase, u32 mux_size,
-		  struct omap_mux *superset,
-		  struct omap_mux *package_subset,
-		  struct omap_board_mux *board_mux,
-		  struct omap_ball *package_balls);
-

arch/arm/mach-omap2/mux34xx.c

@@ -1,2061 +0,0 @@
-/*
- * Copyright (C) 2009 Nokia
- * Copyright (C) 2009 Texas Instruments
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-
-#include "mux.h"
-
-#ifdef CONFIG_OMAP_MUX
-
-#define _OMAP3_MUXENTRY(M0, g, m0, m1, m2, m3, m4, m5, m6, m7)		\
-{									\
-	.reg_offset	= (OMAP3_CONTROL_PADCONF_##M0##_OFFSET),	\
-	.gpio		= (g),						\
-	.muxnames	= { m0, m1, m2, m3, m4, m5, m6, m7 },		\
-}
-
-#else
-
-#define _OMAP3_MUXENTRY(M0, g, m0, m1, m2, m3, m4, m5, m6, m7)		\
-{									\
-	.reg_offset	= (OMAP3_CONTROL_PADCONF_##M0##_OFFSET),	\
-	.gpio		= (g),						\
-}
-
-#endif
-
-#define _OMAP3_BALLENTRY(M0, bb, bt)					\
-{									\
-	.reg_offset	= (OMAP3_CONTROL_PADCONF_##M0##_OFFSET),	\
-	.balls		= { bb, bt },					\
-}
-
-/*
- * Superset of all mux modes for omap3
- */
-static struct omap_mux __initdata omap3_muxmodes[] = {
-	_OMAP3_MUXENTRY(CAM_D0, 99,
-		"cam_d0", NULL, NULL, NULL,
-		"gpio_99", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_D1, 100,
-		"cam_d1", NULL, NULL, NULL,
-		"gpio_100", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_D10, 109,
-		"cam_d10", NULL, NULL, NULL,
-		"gpio_109", "hw_dbg8", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_D11, 110,
-		"cam_d11", NULL, NULL, NULL,
-		"gpio_110", "hw_dbg9", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_D2, 101,
-		"cam_d2", NULL, NULL, NULL,
-		"gpio_101", "hw_dbg4", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_D3, 102,
-		"cam_d3", NULL, NULL, NULL,
-		"gpio_102", "hw_dbg5", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_D4, 103,
-		"cam_d4", NULL, NULL, NULL,
-		"gpio_103", "hw_dbg6", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_D5, 104,
-		"cam_d5", NULL, NULL, NULL,
-		"gpio_104", "hw_dbg7", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_D6, 105,
-		"cam_d6", NULL, NULL, NULL,
-		"gpio_105", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_D7, 106,
-		"cam_d7", NULL, NULL, NULL,
-		"gpio_106", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_D8, 107,
-		"cam_d8", NULL, NULL, NULL,
-		"gpio_107", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_D9, 108,
-		"cam_d9", NULL, NULL, NULL,
-		"gpio_108", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_FLD, 98,
-		"cam_fld", NULL, "cam_global_reset", NULL,
-		"gpio_98", "hw_dbg3", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_HS, 94,
-		"cam_hs", NULL, NULL, NULL,
-		"gpio_94", "hw_dbg0", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_PCLK, 97,
-		"cam_pclk", NULL, NULL, NULL,
-		"gpio_97", "hw_dbg2", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_STROBE, 126,
-		"cam_strobe", NULL, NULL, NULL,
-		"gpio_126", "hw_dbg11", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_VS, 95,
-		"cam_vs", NULL, NULL, NULL,
-		"gpio_95", "hw_dbg1", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_WEN, 167,
-		"cam_wen", NULL, "cam_shutter", NULL,
-		"gpio_167", "hw_dbg10", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_XCLKA, 96,
-		"cam_xclka", NULL, NULL, NULL,
-		"gpio_96", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_XCLKB, 111,
-		"cam_xclkb", NULL, NULL, NULL,
-		"gpio_111", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CSI2_DX0, 112,
-		"csi2_dx0", NULL, NULL, NULL,
-		"gpio_112", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CSI2_DX1, 114,
-		"csi2_dx1", NULL, NULL, NULL,
-		"gpio_114", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CSI2_DY0, 113,
-		"csi2_dy0", NULL, NULL, NULL,
-		"gpio_113", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CSI2_DY1, 115,
-		"csi2_dy1", NULL, NULL, NULL,
-		"gpio_115", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_ACBIAS, 69,
-		"dss_acbias", NULL, NULL, NULL,
-		"gpio_69", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA0, 70,
-		"dss_data0", NULL, "uart1_cts", NULL,
-		"gpio_70", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA1, 71,
-		"dss_data1", NULL, "uart1_rts", NULL,
-		"gpio_71", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA10, 80,
-		"dss_data10", NULL, NULL, NULL,
-		"gpio_80", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA11, 81,
-		"dss_data11", NULL, NULL, NULL,
-		"gpio_81", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA12, 82,
-		"dss_data12", NULL, NULL, NULL,
-		"gpio_82", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA13, 83,
-		"dss_data13", NULL, NULL, NULL,
-		"gpio_83", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA14, 84,
-		"dss_data14", NULL, NULL, NULL,
-		"gpio_84", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA15, 85,
-		"dss_data15", NULL, NULL, NULL,
-		"gpio_85", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA16, 86,
-		"dss_data16", NULL, NULL, NULL,
-		"gpio_86", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA17, 87,
-		"dss_data17", NULL, NULL, NULL,
-		"gpio_87", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA18, 88,
-		"dss_data18", NULL, "mcspi3_clk", "dss_data0",
-		"gpio_88", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA19, 89,
-		"dss_data19", NULL, "mcspi3_simo", "dss_data1",
-		"gpio_89", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA20, 90,
-		"dss_data20", NULL, "mcspi3_somi", "dss_data2",
-		"gpio_90", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA21, 91,
-		"dss_data21", NULL, "mcspi3_cs0", "dss_data3",
-		"gpio_91", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA22, 92,
-		"dss_data22", NULL, "mcspi3_cs1", "dss_data4",
-		"gpio_92", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA23, 93,
-		"dss_data23", NULL, NULL, "dss_data5",
-		"gpio_93", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA2, 72,
-		"dss_data2", NULL, NULL, NULL,
-		"gpio_72", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA3, 73,
-		"dss_data3", NULL, NULL, NULL,
-		"gpio_73", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA4, 74,
-		"dss_data4", NULL, "uart3_rx_irrx", NULL,
-		"gpio_74", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA5, 75,
-		"dss_data5", NULL, "uart3_tx_irtx", NULL,
-		"gpio_75", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA6, 76,
-		"dss_data6", NULL, "uart1_tx", NULL,
-		"gpio_76", "hw_dbg14", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA7, 77,
-		"dss_data7", NULL, "uart1_rx", NULL,
-		"gpio_77", "hw_dbg15", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA8, 78,
-		"dss_data8", NULL, NULL, NULL,
-		"gpio_78", "hw_dbg16", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA9, 79,
-		"dss_data9", NULL, NULL, NULL,
-		"gpio_79", "hw_dbg17", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_HSYNC, 67,
-		"dss_hsync", NULL, NULL, NULL,
-		"gpio_67", "hw_dbg13", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_PCLK, 66,
-		"dss_pclk", NULL, NULL, NULL,
-		"gpio_66", "hw_dbg12", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_VSYNC, 68,
-		"dss_vsync", NULL, NULL, NULL,
-		"gpio_68", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(ETK_CLK, 12,
-		"etk_clk", "mcbsp5_clkx", "sdmmc3_clk", "hsusb1_stp",
-		"gpio_12", "mm1_rxdp", "hsusb1_tll_stp", "hw_dbg0"),
-	_OMAP3_MUXENTRY(ETK_CTL, 13,
-		"etk_ctl", NULL, "sdmmc3_cmd", "hsusb1_clk",
-		"gpio_13", NULL, "hsusb1_tll_clk", "hw_dbg1"),
-	_OMAP3_MUXENTRY(ETK_D0, 14,
-		"etk_d0", "mcspi3_simo", "sdmmc3_dat4", "hsusb1_data0",
-		"gpio_14", "mm1_rxrcv", "hsusb1_tll_data0", "hw_dbg2"),
-	_OMAP3_MUXENTRY(ETK_D1, 15,
-		"etk_d1", "mcspi3_somi", NULL, "hsusb1_data1",
-		"gpio_15", "mm1_txse0", "hsusb1_tll_data1", "hw_dbg3"),
-	_OMAP3_MUXENTRY(ETK_D10, 24,
-		"etk_d10", NULL, "uart1_rx", "hsusb2_clk",
-		"gpio_24", NULL, "hsusb2_tll_clk", "hw_dbg12"),
-	_OMAP3_MUXENTRY(ETK_D11, 25,
-		"etk_d11", NULL, NULL, "hsusb2_stp",
-		"gpio_25", "mm2_rxdp", "hsusb2_tll_stp", "hw_dbg13"),
-	_OMAP3_MUXENTRY(ETK_D12, 26,
-		"etk_d12", NULL, NULL, "hsusb2_dir",
-		"gpio_26", NULL, "hsusb2_tll_dir", "hw_dbg14"),
-	_OMAP3_MUXENTRY(ETK_D13, 27,
-		"etk_d13", NULL, NULL, "hsusb2_nxt",
-		"gpio_27", "mm2_rxdm", "hsusb2_tll_nxt", "hw_dbg15"),
-	_OMAP3_MUXENTRY(ETK_D14, 28,
-		"etk_d14", NULL, NULL, "hsusb2_data0",
-		"gpio_28", "mm2_rxrcv", "hsusb2_tll_data0", "hw_dbg16"),
-	_OMAP3_MUXENTRY(ETK_D15, 29,
-		"etk_d15", NULL, NULL, "hsusb2_data1",
-		"gpio_29", "mm2_txse0", "hsusb2_tll_data1", "hw_dbg17"),
-	_OMAP3_MUXENTRY(ETK_D2, 16,
-		"etk_d2", "mcspi3_cs0", NULL, "hsusb1_data2",
-		"gpio_16", "mm1_txdat", "hsusb1_tll_data2", "hw_dbg4"),
-	_OMAP3_MUXENTRY(ETK_D3, 17,
-		"etk_d3", "mcspi3_clk", "sdmmc3_dat3", "hsusb1_data7",
-		"gpio_17", NULL, "hsusb1_tll_data7", "hw_dbg5"),
-	_OMAP3_MUXENTRY(ETK_D4, 18,
-		"etk_d4", "mcbsp5_dr", "sdmmc3_dat0", "hsusb1_data4",
-		"gpio_18", NULL, "hsusb1_tll_data4", "hw_dbg6"),
-	_OMAP3_MUXENTRY(ETK_D5, 19,
-		"etk_d5", "mcbsp5_fsx", "sdmmc3_dat1", "hsusb1_data5",
-		"gpio_19", NULL, "hsusb1_tll_data5", "hw_dbg7"),
-	_OMAP3_MUXENTRY(ETK_D6, 20,
-		"etk_d6", "mcbsp5_dx", "sdmmc3_dat2", "hsusb1_data6",
-		"gpio_20", NULL, "hsusb1_tll_data6", "hw_dbg8"),
-	_OMAP3_MUXENTRY(ETK_D7, 21,
-		"etk_d7", "mcspi3_cs1", "sdmmc3_dat7", "hsusb1_data3",
-		"gpio_21", "mm1_txen_n", "hsusb1_tll_data3", "hw_dbg9"),
-	_OMAP3_MUXENTRY(ETK_D8, 22,
-		"etk_d8", "sys_drm_msecure", "sdmmc3_dat6", "hsusb1_dir",
-		"gpio_22", NULL, "hsusb1_tll_dir", "hw_dbg10"),
-	_OMAP3_MUXENTRY(ETK_D9, 23,
-		"etk_d9", "sys_secure_indicator", "sdmmc3_dat5", "hsusb1_nxt",
-		"gpio_23", "mm1_rxdm", "hsusb1_tll_nxt", "hw_dbg11"),
-	_OMAP3_MUXENTRY(GPMC_A1, 34,
-		"gpmc_a1", NULL, NULL, NULL,
-		"gpio_34", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(GPMC_A10, 43,
-		"gpmc_a10", "sys_ndmareq3", NULL, NULL,
-		"gpio_43", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(GPMC_A2, 35,
-		"gpmc_a2", NULL, NULL, NULL,
-		"gpio_35", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(GPMC_A3, 36,
-		"gpmc_a3", NULL, NULL, NULL,
-		"gpio_36", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(GPMC_A4, 37,
-		"gpmc_a4", NULL, NULL, NULL,
-		"gpio_37", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(GPMC_A5, 38,
-		"gpmc_a5", NULL, NULL, NULL,
-		"gpio_38", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(GPMC_A6, 39,
-		"gpmc_a6", NULL, NULL, NULL,
-		"gpio_39", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(GPMC_A7, 40,
-		"gpmc_a7", NULL, NULL, NULL,
-		"gpio_40", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(GPMC_A8, 41,
-		"gpmc_a8", NULL, NULL, NULL,
-		"gpio_41", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(GPMC_A9, 42,
-		"gpmc_a9", "sys_ndmareq2", NULL, NULL,
-		"gpio_42", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(GPMC_CLK, 59,
-		"gpmc_clk", NULL, NULL, NULL,
-		"gpio_59", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(GPMC_D10, 46,
-		"gpmc_d10", NULL, NULL, NULL,
-		"gpio_46", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(GPMC_D11, 47,
-		"gpmc_d11", NULL, NULL, NULL,
-		"gpio_47", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(GPMC_D12, 48,
-		"gpmc_d12", NULL, NULL, NULL,
-		"gpio_48", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(GPMC_D13, 49,
-		"gpmc_d13", NULL, NULL, NULL,
-		"gpio_49", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(GPMC_D14, 50,
-		"gpmc_d14", NULL, NULL, NULL,
-		"gpio_50", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(GPMC_D15, 51,
-		"gpmc_d15", NULL, NULL, NULL,
-		"gpio_51", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(GPMC_D8, 44,
-		"gpmc_d8", NULL, NULL, NULL,
-		"gpio_44", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(GPMC_D9, 45,
-		"gpmc_d9", NULL, NULL, NULL,
-		"gpio_45", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(GPMC_NBE0_CLE, 60,
-		"gpmc_nbe0_cle", NULL, NULL, NULL,
-		"gpio_60", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(GPMC_NBE1, 61,
-		"gpmc_nbe1", NULL, NULL, NULL,
-		"gpio_61", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(GPMC_NCS1, 52,
-		"gpmc_ncs1", NULL, NULL, NULL,
-		"gpio_52", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(GPMC_NCS2, 53,
-		"gpmc_ncs2", NULL, NULL, NULL,
-		"gpio_53", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(GPMC_NCS3, 54,
-		"gpmc_ncs3", "sys_ndmareq0", NULL, NULL,
-		"gpio_54", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(GPMC_NCS4, 55,
-		"gpmc_ncs4", "sys_ndmareq1", "mcbsp4_clkx", "gpt9_pwm_evt",
-		"gpio_55", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(GPMC_NCS5, 56,
-		"gpmc_ncs5", "sys_ndmareq2", "mcbsp4_dr", "gpt10_pwm_evt",
-		"gpio_56", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(GPMC_NCS6, 57,
-		"gpmc_ncs6", "sys_ndmareq3", "mcbsp4_dx", "gpt11_pwm_evt",
-		"gpio_57", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(GPMC_NCS7, 58,
-		"gpmc_ncs7", "gpmc_io_dir", "mcbsp4_fsx", "gpt8_pwm_evt",
-		"gpio_58", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(GPMC_NWP, 62,
-		"gpmc_nwp", NULL, NULL, NULL,
-		"gpio_62", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(GPMC_WAIT1, 63,
-		"gpmc_wait1", NULL, NULL, NULL,
-		"gpio_63", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(GPMC_WAIT2, 64,
-		"gpmc_wait2", NULL, NULL, NULL,
-		"gpio_64", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(GPMC_WAIT3, 65,
-		"gpmc_wait3", "sys_ndmareq1", NULL, NULL,
-		"gpio_65", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(HDQ_SIO, 170,
-		"hdq_sio", "sys_altclk", "i2c2_sccbe", "i2c3_sccbe",
-		"gpio_170", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(HSUSB0_CLK, 120,
-		"hsusb0_clk", NULL, NULL, NULL,
-		"gpio_120", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(HSUSB0_DATA0, 125,
-		"hsusb0_data0", NULL, "uart3_tx_irtx", NULL,
-		"gpio_125", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(HSUSB0_DATA1, 130,
-		"hsusb0_data1", NULL, "uart3_rx_irrx", NULL,
-		"gpio_130", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(HSUSB0_DATA2, 131,
-		"hsusb0_data2", NULL, "uart3_rts_sd", NULL,
-		"gpio_131", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(HSUSB0_DATA3, 169,
-		"hsusb0_data3", NULL, "uart3_cts_rctx", NULL,
-		"gpio_169", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(HSUSB0_DATA4, 188,
-		"hsusb0_data4", NULL, NULL, NULL,
-		"gpio_188", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(HSUSB0_DATA5, 189,
-		"hsusb0_data5", NULL, NULL, NULL,
-		"gpio_189", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(HSUSB0_DATA6, 190,
-		"hsusb0_data6", NULL, NULL, NULL,
-		"gpio_190", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(HSUSB0_DATA7, 191,
-		"hsusb0_data7", NULL, NULL, NULL,
-		"gpio_191", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(HSUSB0_DIR, 122,
-		"hsusb0_dir", NULL, NULL, NULL,
-		"gpio_122", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(HSUSB0_NXT, 124,
-		"hsusb0_nxt", NULL, NULL, NULL,
-		"gpio_124", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(HSUSB0_STP, 121,
-		"hsusb0_stp", NULL, NULL, NULL,
-		"gpio_121", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(I2C2_SCL, 168,
-		"i2c2_scl", NULL, NULL, NULL,
-		"gpio_168", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(I2C2_SDA, 183,
-		"i2c2_sda", NULL, NULL, NULL,
-		"gpio_183", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(I2C3_SCL, 184,
-		"i2c3_scl", NULL, NULL, NULL,
-		"gpio_184", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(I2C3_SDA, 185,
-		"i2c3_sda", NULL, NULL, NULL,
-		"gpio_185", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(I2C4_SCL, 0,
-		"i2c4_scl", "sys_nvmode1", NULL, NULL,
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(I2C4_SDA, 0,
-		"i2c4_sda", "sys_nvmode2", NULL, NULL,
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(JTAG_EMU0, 11,
-		"jtag_emu0", NULL, NULL, NULL,
-		"gpio_11", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(JTAG_EMU1, 31,
-		"jtag_emu1", NULL, NULL, NULL,
-		"gpio_31", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(MCBSP1_CLKR, 156,
-		"mcbsp1_clkr", "mcspi4_clk", NULL, NULL,
-		"gpio_156", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(MCBSP1_CLKX, 162,
-		"mcbsp1_clkx", NULL, "mcbsp3_clkx", NULL,
-		"gpio_162", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(MCBSP1_DR, 159,
-		"mcbsp1_dr", "mcspi4_somi", "mcbsp3_dr", NULL,
-		"gpio_159", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(MCBSP1_DX, 158,
-		"mcbsp1_dx", "mcspi4_simo", "mcbsp3_dx", NULL,
-		"gpio_158", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(MCBSP1_FSR, 157,
-		"mcbsp1_fsr", NULL, "cam_global_reset", NULL,
-		"gpio_157", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(MCBSP1_FSX, 161,
-		"mcbsp1_fsx", "mcspi4_cs0", "mcbsp3_fsx", NULL,
-		"gpio_161", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(MCBSP2_CLKX, 117,
-		"mcbsp2_clkx", NULL, NULL, NULL,
-		"gpio_117", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(MCBSP2_DR, 118,
-		"mcbsp2_dr", NULL, NULL, NULL,
-		"gpio_118", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(MCBSP2_DX, 119,
-		"mcbsp2_dx", NULL, NULL, NULL,
-		"gpio_119", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(MCBSP2_FSX, 116,
-		"mcbsp2_fsx", NULL, NULL, NULL,
-		"gpio_116", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(MCBSP3_CLKX, 142,
-		"mcbsp3_clkx", "uart2_tx", NULL, NULL,
-		"gpio_142", "hsusb3_tll_data6", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(MCBSP3_DR, 141,
-		"mcbsp3_dr", "uart2_rts", NULL, NULL,
-		"gpio_141", "hsusb3_tll_data5", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(MCBSP3_DX, 140,
-		"mcbsp3_dx", "uart2_cts", NULL, NULL,
-		"gpio_140", "hsusb3_tll_data4", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(MCBSP3_FSX, 143,
-		"mcbsp3_fsx", "uart2_rx", NULL, NULL,
-		"gpio_143", "hsusb3_tll_data7", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(MCBSP4_CLKX, 152,
-		"mcbsp4_clkx", NULL, NULL, NULL,
-		"gpio_152", "hsusb3_tll_data1", "mm3_txse0", "safe_mode"),
-	_OMAP3_MUXENTRY(MCBSP4_DR, 153,
-		"mcbsp4_dr", NULL, NULL, NULL,
-		"gpio_153", "hsusb3_tll_data0", "mm3_rxrcv", "safe_mode"),
-	_OMAP3_MUXENTRY(MCBSP4_DX, 154,
-		"mcbsp4_dx", NULL, NULL, NULL,
-		"gpio_154", "hsusb3_tll_data2", "mm3_txdat", "safe_mode"),
-	_OMAP3_MUXENTRY(MCBSP4_FSX, 155,
-		"mcbsp4_fsx", NULL, NULL, NULL,
-		"gpio_155", "hsusb3_tll_data3", "mm3_txen_n", "safe_mode"),
-	_OMAP3_MUXENTRY(MCBSP_CLKS, 160,
-		"mcbsp_clks", NULL, "cam_shutter", NULL,
-		"gpio_160", "uart1_cts", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(MCSPI1_CLK, 171,
-		"mcspi1_clk", "sdmmc2_dat4", NULL, NULL,
-		"gpio_171", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(MCSPI1_CS0, 174,
-		"mcspi1_cs0", "sdmmc2_dat7", NULL, NULL,
-		"gpio_174", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(MCSPI1_CS1, 175,
-		"mcspi1_cs1", NULL, NULL, "sdmmc3_cmd",
-		"gpio_175", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(MCSPI1_CS2, 176,
-		"mcspi1_cs2", NULL, NULL, "sdmmc3_clk",
-		"gpio_176", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(MCSPI1_CS3, 177,
-		"mcspi1_cs3", NULL, "hsusb2_tll_data2", "hsusb2_data2",
-		"gpio_177", "mm2_txdat", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(MCSPI1_SIMO, 172,
-		"mcspi1_simo", "sdmmc2_dat5", NULL, NULL,
-		"gpio_172", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(MCSPI1_SOMI, 173,
-		"mcspi1_somi", "sdmmc2_dat6", NULL, NULL,
-		"gpio_173", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(MCSPI2_CLK, 178,
-		"mcspi2_clk", NULL, "hsusb2_tll_data7", "hsusb2_data7",
-		"gpio_178", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(MCSPI2_CS0, 181,
-		"mcspi2_cs0", "gpt11_pwm_evt",
-		"hsusb2_tll_data6", "hsusb2_data6",
-		"gpio_181", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(MCSPI2_CS1, 182,
-		"mcspi2_cs1", "gpt8_pwm_evt",
-		"hsusb2_tll_data3", "hsusb2_data3",
-		"gpio_182", "mm2_txen_n", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(MCSPI2_SIMO, 179,
-		"mcspi2_simo", "gpt9_pwm_evt",
-		"hsusb2_tll_data4", "hsusb2_data4",
-		"gpio_179", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(MCSPI2_SOMI, 180,
-		"mcspi2_somi", "gpt10_pwm_evt",
-		"hsusb2_tll_data5", "hsusb2_data5",
-		"gpio_180", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SDMMC1_CLK, 120,
-		"sdmmc1_clk", NULL, NULL, NULL,
-		"gpio_120", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SDMMC1_CMD, 121,
-		"sdmmc1_cmd", NULL, NULL, NULL,
-		"gpio_121", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SDMMC1_DAT0, 122,
-		"sdmmc1_dat0", NULL, NULL, NULL,
-		"gpio_122", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SDMMC1_DAT1, 123,
-		"sdmmc1_dat1", NULL, NULL, NULL,
-		"gpio_123", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SDMMC1_DAT2, 124,
-		"sdmmc1_dat2", NULL, NULL, NULL,
-		"gpio_124", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SDMMC1_DAT3, 125,
-		"sdmmc1_dat3", NULL, NULL, NULL,
-		"gpio_125", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SDMMC1_DAT4, 126,
-		"sdmmc1_dat4", NULL, "sim_io", NULL,
-		"gpio_126", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SDMMC1_DAT5, 127,
-		"sdmmc1_dat5", NULL, "sim_clk", NULL,
-		"gpio_127", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SDMMC1_DAT6, 128,
-		"sdmmc1_dat6", NULL, "sim_pwrctrl", NULL,
-		"gpio_128", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SDMMC1_DAT7, 129,
-		"sdmmc1_dat7", NULL, "sim_rst", NULL,
-		"gpio_129", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SDMMC2_CLK, 130,
-		"sdmmc2_clk", "mcspi3_clk", NULL, NULL,
-		"gpio_130", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SDMMC2_CMD, 131,
-		"sdmmc2_cmd", "mcspi3_simo", NULL, NULL,
-		"gpio_131", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SDMMC2_DAT0, 132,
-		"sdmmc2_dat0", "mcspi3_somi", NULL, NULL,
-		"gpio_132", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SDMMC2_DAT1, 133,
-		"sdmmc2_dat1", NULL, NULL, NULL,
-		"gpio_133", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SDMMC2_DAT2, 134,
-		"sdmmc2_dat2", "mcspi3_cs1", NULL, NULL,
-		"gpio_134", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SDMMC2_DAT3, 135,
-		"sdmmc2_dat3", "mcspi3_cs0", NULL, NULL,
-		"gpio_135", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SDMMC2_DAT4, 136,
-		"sdmmc2_dat4", "sdmmc2_dir_dat0", NULL, "sdmmc3_dat0",
-		"gpio_136", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SDMMC2_DAT5, 137,
-		"sdmmc2_dat5", "sdmmc2_dir_dat1",
-		"cam_global_reset", "sdmmc3_dat1",
-		"gpio_137", "hsusb3_tll_stp", "mm3_rxdp", "safe_mode"),
-	_OMAP3_MUXENTRY(SDMMC2_DAT6, 138,
-		"sdmmc2_dat6", "sdmmc2_dir_cmd", "cam_shutter", "sdmmc3_dat2",
-		"gpio_138", "hsusb3_tll_dir", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SDMMC2_DAT7, 139,
-		"sdmmc2_dat7", "sdmmc2_clkin", NULL, "sdmmc3_dat3",
-		"gpio_139", "hsusb3_tll_nxt", "mm3_rxdm", "safe_mode"),
-	_OMAP3_MUXENTRY(SDRC_CKE0, 0,
-		"sdrc_cke0", NULL, NULL, NULL,
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SDRC_CKE1, 0,
-		"sdrc_cke1", NULL, NULL, NULL,
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SYS_BOOT0, 2,
-		"sys_boot0", NULL, NULL, NULL,
-		"gpio_2", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SYS_BOOT1, 3,
-		"sys_boot1", NULL, NULL, NULL,
-		"gpio_3", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SYS_BOOT2, 4,
-		"sys_boot2", NULL, NULL, NULL,
-		"gpio_4", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SYS_BOOT3, 5,
-		"sys_boot3", NULL, NULL, NULL,
-		"gpio_5", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SYS_BOOT4, 6,
-		"sys_boot4", "sdmmc2_dir_dat2", NULL, NULL,
-		"gpio_6", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SYS_BOOT5, 7,
-		"sys_boot5", "sdmmc2_dir_dat3", NULL, NULL,
-		"gpio_7", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SYS_BOOT6, 8,
-		"sys_boot6", NULL, NULL, NULL,
-		"gpio_8", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SYS_CLKOUT1, 10,
-		"sys_clkout1", NULL, NULL, NULL,
-		"gpio_10", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SYS_CLKOUT2, 186,
-		"sys_clkout2", NULL, NULL, NULL,
-		"gpio_186", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SYS_CLKREQ, 1,
-		"sys_clkreq", NULL, NULL, NULL,
-		"gpio_1", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SYS_NIRQ, 0,
-		"sys_nirq", NULL, NULL, NULL,
-		"gpio_0", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SYS_NRESWARM, 30,
-		"sys_nreswarm", NULL, NULL, NULL,
-		"gpio_30", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SYS_OFF_MODE, 9,
-		"sys_off_mode", NULL, NULL, NULL,
-		"gpio_9", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(UART1_CTS, 150,
-		"uart1_cts", "ssi1_rdy_tx", NULL, NULL,
-		"gpio_150", "hsusb3_tll_clk", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(UART1_RTS, 149,
-		"uart1_rts", "ssi1_flag_tx", NULL, NULL,
-		"gpio_149", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(UART1_RX, 151,
-		"uart1_rx", "ssi1_wake_tx", "mcbsp1_clkr", "mcspi4_clk",
-		"gpio_151", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(UART1_TX, 148,
-		"uart1_tx", "ssi1_dat_tx", NULL, NULL,
-		"gpio_148", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(UART2_CTS, 144,
-		"uart2_cts", "mcbsp3_dx", "gpt9_pwm_evt", NULL,
-		"gpio_144", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(UART2_RTS, 145,
-		"uart2_rts", "mcbsp3_dr", "gpt10_pwm_evt", NULL,
-		"gpio_145", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(UART2_RX, 147,
-		"uart2_rx", "mcbsp3_fsx", "gpt8_pwm_evt", NULL,
-		"gpio_147", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(UART2_TX, 146,
-		"uart2_tx", "mcbsp3_clkx", "gpt11_pwm_evt", NULL,
-		"gpio_146", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(UART3_CTS_RCTX, 163,
-		"uart3_cts_rctx", NULL, NULL, NULL,
-		"gpio_163", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(UART3_RTS_SD, 164,
-		"uart3_rts_sd", NULL, NULL, NULL,
-		"gpio_164", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(UART3_RX_IRRX, 165,
-		"uart3_rx_irrx", NULL, NULL, NULL,
-		"gpio_165", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(UART3_TX_IRTX, 166,
-		"uart3_tx_irtx", NULL, NULL, NULL,
-		"gpio_166", NULL, NULL, "safe_mode"),
-
-	/* Only on 3630, see omap36xx_cbp_subset for the signals */
-	_OMAP3_MUXENTRY(GPMC_A11, 0,
-		NULL, NULL, NULL, NULL,
-		NULL, NULL, NULL, NULL),
-	_OMAP3_MUXENTRY(SAD2D_MBUSFLAG, 0,
-		NULL, NULL, NULL, NULL,
-		NULL, NULL, NULL, NULL),
-	_OMAP3_MUXENTRY(SAD2D_MREAD, 0,
-		NULL, NULL, NULL, NULL,
-		NULL, NULL, NULL, NULL),
-	_OMAP3_MUXENTRY(SAD2D_MWRITE, 0,
-		NULL, NULL, NULL, NULL,
-		NULL, NULL, NULL, NULL),
-	_OMAP3_MUXENTRY(SAD2D_SBUSFLAG, 0,
-		NULL, NULL, NULL, NULL,
-		NULL, NULL, NULL, NULL),
-	_OMAP3_MUXENTRY(SAD2D_SREAD, 0,
-		NULL, NULL, NULL, NULL,
-		NULL, NULL, NULL, NULL),
-	_OMAP3_MUXENTRY(SAD2D_SWRITE, 0,
-		NULL, NULL, NULL, NULL,
-		NULL, NULL, NULL, NULL),
-	_OMAP3_MUXENTRY(GPMC_A11, 0,
-		NULL, NULL, NULL, NULL,
-		NULL, NULL, NULL, NULL),
-	_OMAP3_MUXENTRY(SAD2D_MCAD28, 0,
-		NULL, NULL, NULL, NULL,
-		NULL, NULL, NULL, NULL),
-	_OMAP3_MUXENTRY(SAD2D_MCAD29, 0,
-		NULL, NULL, NULL, NULL,
-		NULL, NULL, NULL, NULL),
-	_OMAP3_MUXENTRY(SAD2D_MCAD32, 0,
-		NULL, NULL, NULL, NULL,
-		NULL, NULL, NULL, NULL),
-	_OMAP3_MUXENTRY(SAD2D_MCAD33, 0,
-		NULL, NULL, NULL, NULL,
-		NULL, NULL, NULL, NULL),
-	_OMAP3_MUXENTRY(SAD2D_MCAD34, 0,
-		NULL, NULL, NULL, NULL,
-		NULL, NULL, NULL, NULL),
-	_OMAP3_MUXENTRY(SAD2D_MCAD35, 0,
-		NULL, NULL, NULL, NULL,
-		NULL, NULL, NULL, NULL),
-	_OMAP3_MUXENTRY(SAD2D_MCAD36, 0,
-		NULL, NULL, NULL, NULL,
-		NULL, NULL, NULL, NULL),
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-
-/*
- * Signals different on CBC package compared to the superset
- */
-#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_OMAP_PACKAGE_CBC)
-static struct omap_mux __initdata omap3_cbc_subset[] = {
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#else
-#define omap3_cbc_subset	NULL
-#endif
-
-/*
- * Balls for CBC package
- * 515-pin s-PBGA Package, 0.65mm Ball Pitch (Top), 0.50mm Ball Pitch (Bottom)
- *
- * FIXME: What's up with the outdated TI documentation? See:
- *
- * http://wiki.davincidsp.com/index.php/Datasheet_Errata_for_OMAP35x_CBC_Package
- * http://community.ti.com/forums/t/10982.aspx
- */
-#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS)	\
-		&& defined(CONFIG_OMAP_PACKAGE_CBC)
-static struct omap_ball __initdata omap3_cbc_ball[] = {
-	_OMAP3_BALLENTRY(CAM_D0, "ae16", NULL),
-	_OMAP3_BALLENTRY(CAM_D1, "ae15", NULL),
-	_OMAP3_BALLENTRY(CAM_D10, "d25", NULL),
-	_OMAP3_BALLENTRY(CAM_D11, "e26", NULL),
-	_OMAP3_BALLENTRY(CAM_D2, "a24", NULL),
-	_OMAP3_BALLENTRY(CAM_D3, "b24", NULL),
-	_OMAP3_BALLENTRY(CAM_D4, "d24", NULL),
-	_OMAP3_BALLENTRY(CAM_D5, "c24", NULL),
-	_OMAP3_BALLENTRY(CAM_D6, "p25", NULL),
-	_OMAP3_BALLENTRY(CAM_D7, "p26", NULL),
-	_OMAP3_BALLENTRY(CAM_D8, "n25", NULL),
-	_OMAP3_BALLENTRY(CAM_D9, "n26", NULL),
-	_OMAP3_BALLENTRY(CAM_FLD, "b23", NULL),
-	_OMAP3_BALLENTRY(CAM_HS, "c23", NULL),
-	_OMAP3_BALLENTRY(CAM_PCLK, "c26", NULL),
-	_OMAP3_BALLENTRY(CAM_STROBE, "d26", NULL),
-	_OMAP3_BALLENTRY(CAM_VS, "d23", NULL),
-	_OMAP3_BALLENTRY(CAM_WEN, "a23", NULL),
-	_OMAP3_BALLENTRY(CAM_XCLKA, "c25", NULL),
-	_OMAP3_BALLENTRY(CAM_XCLKB, "e25", NULL),
-	_OMAP3_BALLENTRY(CSI2_DX0, "ad17", NULL),
-	_OMAP3_BALLENTRY(CSI2_DX1, "ae18", NULL),
-	_OMAP3_BALLENTRY(CSI2_DY0, "ad16", NULL),
-	_OMAP3_BALLENTRY(CSI2_DY1, "ae17", NULL),
-	_OMAP3_BALLENTRY(DSS_ACBIAS, "f26", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA0, "ae21", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA1, "ae22", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA10, "ac26", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA11, "ad26", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA12, "aa25", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA13, "y25", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA14, "aa26", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA15, "ab26", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA16, "l25", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA17, "l26", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA18, "m24", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA19, "m26", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA2, "ae23", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA20, "f25", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA21, "n24", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA22, "ac25", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA23, "ab25", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA3, "ae24", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA4, "ad23", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA5, "ad24", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA6, "g26", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA7, "h25", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA8, "h26", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA9, "j26", NULL),
-	_OMAP3_BALLENTRY(DSS_HSYNC, "k24", NULL),
-	_OMAP3_BALLENTRY(DSS_PCLK, "g25", NULL),
-	_OMAP3_BALLENTRY(DSS_VSYNC, "m25", NULL),
-	_OMAP3_BALLENTRY(ETK_CLK, "ab2", NULL),
-	_OMAP3_BALLENTRY(ETK_CTL, "ab3", NULL),
-	_OMAP3_BALLENTRY(ETK_D0, "ac3", NULL),
-	_OMAP3_BALLENTRY(ETK_D1, "ad4", NULL),
-	_OMAP3_BALLENTRY(ETK_D10, "ae4", NULL),
-	_OMAP3_BALLENTRY(ETK_D11, "af6", NULL),
-	_OMAP3_BALLENTRY(ETK_D12, "ae6", NULL),
-	_OMAP3_BALLENTRY(ETK_D13, "af7", NULL),
-	_OMAP3_BALLENTRY(ETK_D14, "af9", NULL),
-	_OMAP3_BALLENTRY(ETK_D15, "ae9", NULL),
-	_OMAP3_BALLENTRY(ETK_D2, "ad3", NULL),
-	_OMAP3_BALLENTRY(ETK_D3, "aa3", NULL),
-	_OMAP3_BALLENTRY(ETK_D4, "y3", NULL),
-	_OMAP3_BALLENTRY(ETK_D5, "ab1", NULL),
-	_OMAP3_BALLENTRY(ETK_D6, "ae3", NULL),
-	_OMAP3_BALLENTRY(ETK_D7, "ad2", NULL),
-	_OMAP3_BALLENTRY(ETK_D8, "aa4", NULL),
-	_OMAP3_BALLENTRY(ETK_D9, "v2", NULL),
-	_OMAP3_BALLENTRY(GPMC_A1, "j2", NULL),
-	_OMAP3_BALLENTRY(GPMC_A10, "d2", NULL),
-	_OMAP3_BALLENTRY(GPMC_A2, "h1", NULL),
-	_OMAP3_BALLENTRY(GPMC_A3, "h2", NULL),
-	_OMAP3_BALLENTRY(GPMC_A4, "g2", NULL),
-	_OMAP3_BALLENTRY(GPMC_A5, "f1", NULL),
-	_OMAP3_BALLENTRY(GPMC_A6, "f2", NULL),
-	_OMAP3_BALLENTRY(GPMC_A7, "e1", NULL),
-	_OMAP3_BALLENTRY(GPMC_A8, "e2", NULL),
-	_OMAP3_BALLENTRY(GPMC_A9, "d1", NULL),
-	_OMAP3_BALLENTRY(GPMC_CLK, "n1", "l1"),
-	_OMAP3_BALLENTRY(GPMC_D10, "t1", "n1"),
-	_OMAP3_BALLENTRY(GPMC_D11, "u2", "p2"),
-	_OMAP3_BALLENTRY(GPMC_D12, "u1", "p1"),
-	_OMAP3_BALLENTRY(GPMC_D13, "p1", "m1"),
-	_OMAP3_BALLENTRY(GPMC_D14, "l2", "j2"),
-	_OMAP3_BALLENTRY(GPMC_D15, "m2", "k2"),
-	_OMAP3_BALLENTRY(GPMC_D8, "v1", "r1"),
-	_OMAP3_BALLENTRY(GPMC_D9, "y1", "t1"),
-	_OMAP3_BALLENTRY(GPMC_NBE0_CLE, "k2", NULL),
-	_OMAP3_BALLENTRY(GPMC_NBE1, "j1", NULL),
-	_OMAP3_BALLENTRY(GPMC_NCS1, "ad1", "w1"),
-	_OMAP3_BALLENTRY(GPMC_NCS2, "a3", NULL),
-	_OMAP3_BALLENTRY(GPMC_NCS3, "b6", NULL),
-	_OMAP3_BALLENTRY(GPMC_NCS4, "b4", NULL),
-	_OMAP3_BALLENTRY(GPMC_NCS5, "c4", NULL),
-	_OMAP3_BALLENTRY(GPMC_NCS6, "b5", NULL),
-	_OMAP3_BALLENTRY(GPMC_NCS7, "c5", NULL),
-	_OMAP3_BALLENTRY(GPMC_NWP, "ac6", "y5"),
-	_OMAP3_BALLENTRY(GPMC_WAIT1, "ac8", "y8"),
-	_OMAP3_BALLENTRY(GPMC_WAIT2, "b3", NULL),
-	_OMAP3_BALLENTRY(GPMC_WAIT3, "c6", NULL),
-	_OMAP3_BALLENTRY(HDQ_SIO, "j23", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_CLK, "w19", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_DATA0, "v20", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_DATA1, "y20", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_DATA2, "v18", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_DATA3, "w20", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_DATA4, "w17", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_DATA5, "y18", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_DATA6, "y19", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_DATA7, "y17", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_DIR, "v19", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_NXT, "w18", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_STP, "u20", NULL),
-	_OMAP3_BALLENTRY(I2C2_SCL, "c2", NULL),
-	_OMAP3_BALLENTRY(I2C2_SDA, "c1", NULL),
-	_OMAP3_BALLENTRY(I2C3_SCL, "ab4", NULL),
-	_OMAP3_BALLENTRY(I2C3_SDA, "ac4", NULL),
-	_OMAP3_BALLENTRY(I2C4_SCL, "ad15", NULL),
-	_OMAP3_BALLENTRY(I2C4_SDA, "w16", NULL),
-	_OMAP3_BALLENTRY(JTAG_EMU0, "y15", NULL),
-	_OMAP3_BALLENTRY(JTAG_EMU1, "y14", NULL),
-	_OMAP3_BALLENTRY(MCBSP1_CLKR, "u19", NULL),
-	_OMAP3_BALLENTRY(MCBSP1_CLKX, "t17", NULL),
-	_OMAP3_BALLENTRY(MCBSP1_DR, "t20", NULL),
-	_OMAP3_BALLENTRY(MCBSP1_DX, "u17", NULL),
-	_OMAP3_BALLENTRY(MCBSP1_FSR, "v17", NULL),
-	_OMAP3_BALLENTRY(MCBSP1_FSX, "p20", NULL),
-	_OMAP3_BALLENTRY(MCBSP2_CLKX, "r18", NULL),
-	_OMAP3_BALLENTRY(MCBSP2_DR, "t18", NULL),
-	_OMAP3_BALLENTRY(MCBSP2_DX, "r19", NULL),
-	_OMAP3_BALLENTRY(MCBSP2_FSX, "u18", NULL),
-	_OMAP3_BALLENTRY(MCBSP3_CLKX, "u3", NULL),
-	_OMAP3_BALLENTRY(MCBSP3_DR, "n3", NULL),
-	_OMAP3_BALLENTRY(MCBSP3_DX, "p3", NULL),
-	_OMAP3_BALLENTRY(MCBSP3_FSX, "w3", NULL),
-	_OMAP3_BALLENTRY(MCBSP4_CLKX, "v3", NULL),
-	_OMAP3_BALLENTRY(MCBSP4_DR, "u4", NULL),
-	_OMAP3_BALLENTRY(MCBSP4_DX, "r3", NULL),
-	_OMAP3_BALLENTRY(MCBSP4_FSX, "t3", NULL),
-	_OMAP3_BALLENTRY(MCBSP_CLKS, "t19", NULL),
-	_OMAP3_BALLENTRY(MCSPI1_CLK, "p9", NULL),
-	_OMAP3_BALLENTRY(MCSPI1_CS0, "r7", NULL),
-	_OMAP3_BALLENTRY(MCSPI1_CS1, "r8", NULL),
-	_OMAP3_BALLENTRY(MCSPI1_CS2, "r9", NULL),
-	_OMAP3_BALLENTRY(MCSPI1_CS3, "t8", NULL),
-	_OMAP3_BALLENTRY(MCSPI1_SIMO, "p8", NULL),
-	_OMAP3_BALLENTRY(MCSPI1_SOMI, "p7", NULL),
-	_OMAP3_BALLENTRY(MCSPI2_CLK, "w7", NULL),
-	_OMAP3_BALLENTRY(MCSPI2_CS0, "v8", NULL),
-	_OMAP3_BALLENTRY(MCSPI2_CS1, "v9", NULL),
-	_OMAP3_BALLENTRY(MCSPI2_SIMO, "w8", NULL),
-	_OMAP3_BALLENTRY(MCSPI2_SOMI, "u8", NULL),
-	_OMAP3_BALLENTRY(SDMMC1_CLK, "n19", NULL),
-	_OMAP3_BALLENTRY(SDMMC1_CMD, "l18", NULL),
-	_OMAP3_BALLENTRY(SDMMC1_DAT0, "m19", NULL),
-	_OMAP3_BALLENTRY(SDMMC1_DAT1, "m18", NULL),
-	_OMAP3_BALLENTRY(SDMMC1_DAT2, "k18", NULL),
-	_OMAP3_BALLENTRY(SDMMC1_DAT3, "n20", NULL),
-	_OMAP3_BALLENTRY(SDMMC1_DAT4, "m20", NULL),
-	_OMAP3_BALLENTRY(SDMMC1_DAT5, "p17", NULL),
-	_OMAP3_BALLENTRY(SDMMC1_DAT6, "p18", NULL),
-	_OMAP3_BALLENTRY(SDMMC1_DAT7, "p19", NULL),
-	_OMAP3_BALLENTRY(SDMMC2_CLK, "w10", NULL),
-	_OMAP3_BALLENTRY(SDMMC2_CMD, "r10", NULL),
-	_OMAP3_BALLENTRY(SDMMC2_DAT0, "t10", NULL),
-	_OMAP3_BALLENTRY(SDMMC2_DAT1, "t9", NULL),
-	_OMAP3_BALLENTRY(SDMMC2_DAT2, "u10", NULL),
-	_OMAP3_BALLENTRY(SDMMC2_DAT3, "u9", NULL),
-	_OMAP3_BALLENTRY(SDMMC2_DAT4, "v10", NULL),
-	_OMAP3_BALLENTRY(SDMMC2_DAT5, "m3", NULL),
-	_OMAP3_BALLENTRY(SDMMC2_DAT6, "l3", NULL),
-	_OMAP3_BALLENTRY(SDMMC2_DAT7, "k3", NULL),
-	_OMAP3_BALLENTRY(SYS_BOOT0, "f3", NULL),
-	_OMAP3_BALLENTRY(SYS_BOOT1, "d3", NULL),
-	_OMAP3_BALLENTRY(SYS_BOOT2, "c3", NULL),
-	_OMAP3_BALLENTRY(SYS_BOOT3, "e3", NULL),
-	_OMAP3_BALLENTRY(SYS_BOOT4, "e4", NULL),
-	_OMAP3_BALLENTRY(SYS_BOOT5, "g3", NULL),
-	_OMAP3_BALLENTRY(SYS_BOOT6, "d4", NULL),
-	_OMAP3_BALLENTRY(SYS_CLKOUT1, "ae14", NULL),
-	_OMAP3_BALLENTRY(SYS_CLKOUT2, "w11", NULL),
-	_OMAP3_BALLENTRY(SYS_CLKREQ, "w15", NULL),
-	_OMAP3_BALLENTRY(SYS_NIRQ, "v16", NULL),
-	_OMAP3_BALLENTRY(SYS_NRESWARM, "ad7", "aa5"),
-	_OMAP3_BALLENTRY(SYS_OFF_MODE, "v12", NULL),
-	_OMAP3_BALLENTRY(UART1_CTS, "w2", NULL),
-	_OMAP3_BALLENTRY(UART1_RTS, "r2", NULL),
-	_OMAP3_BALLENTRY(UART1_RX, "h3", NULL),
-	_OMAP3_BALLENTRY(UART1_TX, "l4", NULL),
-	_OMAP3_BALLENTRY(UART2_CTS, "y24", NULL),
-	_OMAP3_BALLENTRY(UART2_RTS, "aa24", NULL),
-	_OMAP3_BALLENTRY(UART2_RX, "ad21", NULL),
-	_OMAP3_BALLENTRY(UART2_TX, "ad22", NULL),
-	_OMAP3_BALLENTRY(UART3_CTS_RCTX, "f23", NULL),
-	_OMAP3_BALLENTRY(UART3_RTS_SD, "f24", NULL),
-	_OMAP3_BALLENTRY(UART3_RX_IRRX, "h24", NULL),
-	_OMAP3_BALLENTRY(UART3_TX_IRTX, "g24", NULL),
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#else
-#define omap3_cbc_ball	 NULL
-#endif
-
-/*
- * Signals different on CUS package compared to superset
- */
-#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_OMAP_PACKAGE_CUS)
-static struct omap_mux __initdata omap3_cus_subset[] = {
-	_OMAP3_MUXENTRY(CAM_D10, 109,
-		"cam_d10", NULL, NULL, NULL,
-		"gpio_109", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_D11, 110,
-		"cam_d11", NULL, NULL, NULL,
-		"gpio_110", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_D2, 101,
-		"cam_d2", NULL, NULL, NULL,
-		"gpio_101", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_D3, 102,
-		"cam_d3", NULL, NULL, NULL,
-		"gpio_102", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_D4, 103,
-		"cam_d4", NULL, NULL, NULL,
-		"gpio_103", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_D5, 104,
-		"cam_d5", NULL, NULL, NULL,
-		"gpio_104", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_FLD, 98,
-		"cam_fld", NULL, "cam_global_reset", NULL,
-		"gpio_98", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_HS, 94,
-		"cam_hs", NULL, NULL, NULL,
-		"gpio_94", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_PCLK, 97,
-		"cam_pclk", NULL, NULL, NULL,
-		"gpio_97", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_STROBE, 126,
-		"cam_strobe", NULL, NULL, NULL,
-		"gpio_126", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_VS, 95,
-		"cam_vs", NULL, NULL, NULL,
-		"gpio_95", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_WEN, 167,
-		"cam_wen", NULL, "cam_shutter", NULL,
-		"gpio_167", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA6, 76,
-		"dss_data6", NULL, "uart1_tx", NULL,
-		"gpio_76", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA7, 77,
-		"dss_data7", NULL, "uart1_rx", NULL,
-		"gpio_77", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA8, 78,
-		"dss_data8", NULL, NULL, NULL,
-		"gpio_78", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA9, 79,
-		"dss_data9", NULL, NULL, NULL,
-		"gpio_79", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_HSYNC, 67,
-		"dss_hsync", NULL, NULL, NULL,
-		"gpio_67", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_PCLK, 66,
-		"dss_pclk", NULL, NULL, NULL,
-		"gpio_66", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(ETK_CLK, 12,
-		"etk_clk", "mcbsp5_clkx", "sdmmc3_clk", "hsusb1_stp",
-		"gpio_12", "mm1_rxdp", "hsusb1_tll_stp", NULL),
-	_OMAP3_MUXENTRY(ETK_CTL, 13,
-		"etk_ctl", NULL, "sdmmc3_cmd", "hsusb1_clk",
-		"gpio_13", NULL, "hsusb1_tll_clk", NULL),
-	_OMAP3_MUXENTRY(ETK_D0, 14,
-		"etk_d0", "mcspi3_simo", "sdmmc3_dat4", "hsusb1_data0",
-		"gpio_14", "mm1_rxrcv", "hsusb1_tll_data0", NULL),
-	_OMAP3_MUXENTRY(ETK_D1, 15,
-		"etk_d1", "mcspi3_somi", NULL, "hsusb1_data1",
-		"gpio_15", "mm1_txse0", "hsusb1_tll_data1", NULL),
-	_OMAP3_MUXENTRY(ETK_D10, 24,
-		"etk_d10", NULL, "uart1_rx", "hsusb2_clk",
-		"gpio_24", NULL, "hsusb2_tll_clk", NULL),
-	_OMAP3_MUXENTRY(ETK_D11, 25,
-		"etk_d11", NULL, NULL, "hsusb2_stp",
-		"gpio_25", "mm2_rxdp", "hsusb2_tll_stp", NULL),
-	_OMAP3_MUXENTRY(ETK_D12, 26,
-		"etk_d12", NULL, NULL, "hsusb2_dir",
-		"gpio_26", NULL, "hsusb2_tll_dir", NULL),
-	_OMAP3_MUXENTRY(ETK_D13, 27,
-		"etk_d13", NULL, NULL, "hsusb2_nxt",
-		"gpio_27", "mm2_rxdm", "hsusb2_tll_nxt", NULL),
-	_OMAP3_MUXENTRY(ETK_D14, 28,
-		"etk_d14", NULL, NULL, "hsusb2_data0",
-		"gpio_28", "mm2_rxrcv", "hsusb2_tll_data0", NULL),
-	_OMAP3_MUXENTRY(ETK_D15, 29,
-		"etk_d15", NULL, NULL, "hsusb2_data1",
-		"gpio_29", "mm2_txse0", "hsusb2_tll_data1", NULL),
-	_OMAP3_MUXENTRY(ETK_D2, 16,
-		"etk_d2", "mcspi3_cs0", NULL, "hsusb1_data2",
-		"gpio_16", "mm1_txdat", "hsusb1_tll_data2", NULL),
-	_OMAP3_MUXENTRY(ETK_D3, 17,
-		"etk_d3", "mcspi3_clk", "sdmmc3_dat3", "hsusb1_data7",
-		"gpio_17", NULL, "hsusb1_tll_data7", NULL),
-	_OMAP3_MUXENTRY(ETK_D4, 18,
-		"etk_d4", "mcbsp5_dr", "sdmmc3_dat0", "hsusb1_data4",
-		"gpio_18", NULL, "hsusb1_tll_data4", NULL),
-	_OMAP3_MUXENTRY(ETK_D5, 19,
-		"etk_d5", "mcbsp5_fsx", "sdmmc3_dat1", "hsusb1_data5",
-		"gpio_19", NULL, "hsusb1_tll_data5", NULL),
-	_OMAP3_MUXENTRY(ETK_D6, 20,
-		"etk_d6", "mcbsp5_dx", "sdmmc3_dat2", "hsusb1_data6",
-		"gpio_20", NULL, "hsusb1_tll_data6", NULL),
-	_OMAP3_MUXENTRY(ETK_D7, 21,
-		"etk_d7", "mcspi3_cs1", "sdmmc3_dat7", "hsusb1_data3",
-		"gpio_21", "mm1_txen_n", "hsusb1_tll_data3", NULL),
-	_OMAP3_MUXENTRY(ETK_D8, 22,
-		"etk_d8", "sys_drm_msecure", "sdmmc3_dat6", "hsusb1_dir",
-		"gpio_22", NULL, "hsusb1_tll_dir", NULL),
-	_OMAP3_MUXENTRY(ETK_D9, 23,
-		"etk_d9", "sys_secure_indicator", "sdmmc3_dat5", "hsusb1_nxt",
-		"gpio_23", "mm1_rxdm", "hsusb1_tll_nxt", NULL),
-	_OMAP3_MUXENTRY(MCBSP3_CLKX, 142,
-		"mcbsp3_clkx", "uart2_tx", NULL, NULL,
-		"gpio_142", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(MCBSP3_DR, 141,
-		"mcbsp3_dr", "uart2_rts", NULL, NULL,
-		"gpio_141", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(MCBSP3_DX, 140,
-		"mcbsp3_dx", "uart2_cts", NULL, NULL,
-		"gpio_140", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(MCBSP3_FSX, 143,
-		"mcbsp3_fsx", "uart2_rx", NULL, NULL,
-		"gpio_143", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SDMMC2_DAT5, 137,
-		"sdmmc2_dat5", "sdmmc2_dir_dat1",
-		"cam_global_reset", "sdmmc3_dat1",
-		"gpio_137", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SDMMC2_DAT6, 138,
-		"sdmmc2_dat6", "sdmmc2_dir_cmd", "cam_shutter", "sdmmc3_dat2",
-		"gpio_138", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SDMMC2_DAT7, 139,
-		"sdmmc2_dat7", "sdmmc2_clkin", NULL, "sdmmc3_dat3",
-		"gpio_139", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(UART1_CTS, 150,
-		"uart1_cts", NULL, NULL, NULL,
-		"gpio_150", NULL, NULL, "safe_mode"),
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#else
-#define omap3_cus_subset	NULL
-#endif
-
-/*
- * Balls for CUS package
- * 423-pin s-PBGA Package, 0.65mm Ball Pitch (Bottom)
- */
-#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS)		\
-		&& defined(CONFIG_OMAP_PACKAGE_CUS)
-static struct omap_ball __initdata omap3_cus_ball[] = {
-	_OMAP3_BALLENTRY(CAM_D0, "ab18", NULL),
-	_OMAP3_BALLENTRY(CAM_D1, "ac18", NULL),
-	_OMAP3_BALLENTRY(CAM_D10, "f21", NULL),
-	_OMAP3_BALLENTRY(CAM_D11, "g21", NULL),
-	_OMAP3_BALLENTRY(CAM_D2, "g19", NULL),
-	_OMAP3_BALLENTRY(CAM_D3, "f19", NULL),
-	_OMAP3_BALLENTRY(CAM_D4, "g20", NULL),
-	_OMAP3_BALLENTRY(CAM_D5, "b21", NULL),
-	_OMAP3_BALLENTRY(CAM_D6, "l24", NULL),
-	_OMAP3_BALLENTRY(CAM_D7, "k24", NULL),
-	_OMAP3_BALLENTRY(CAM_D8, "j23", NULL),
-	_OMAP3_BALLENTRY(CAM_D9, "k23", NULL),
-	_OMAP3_BALLENTRY(CAM_FLD, "h24", NULL),
-	_OMAP3_BALLENTRY(CAM_HS, "a22", NULL),
-	_OMAP3_BALLENTRY(CAM_PCLK, "j19", NULL),
-	_OMAP3_BALLENTRY(CAM_STROBE, "j20", NULL),
-	_OMAP3_BALLENTRY(CAM_VS, "e18", NULL),
-	_OMAP3_BALLENTRY(CAM_WEN, "f18", NULL),
-	_OMAP3_BALLENTRY(CAM_XCLKA, "b22", NULL),
-	_OMAP3_BALLENTRY(CAM_XCLKB, "c22", NULL),
-	_OMAP3_BALLENTRY(DSS_ACBIAS, "j21", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA0, "ac19", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA1, "ab19", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA10, "ac22", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA11, "ac23", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA12, "ab22", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA13, "y22", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA14, "w22", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA15, "v22", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA16, "j22", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA17, "g23", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA18, "g24", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA19, "h23", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA2, "ad20", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA20, "d23", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA21, "k22", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA22, "v21", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA23, "w21", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA3, "ac20", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA4, "ad21", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA5, "ac21", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA6, "d24", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA7, "e23", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA8, "e24", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA9, "f23", NULL),
-	_OMAP3_BALLENTRY(DSS_HSYNC, "e22", NULL),
-	_OMAP3_BALLENTRY(DSS_PCLK, "g22", NULL),
-	_OMAP3_BALLENTRY(DSS_VSYNC, "f22", NULL),
-	_OMAP3_BALLENTRY(ETK_CLK, "ac1", NULL),
-	_OMAP3_BALLENTRY(ETK_CTL, "ad3", NULL),
-	_OMAP3_BALLENTRY(ETK_D0, "ad6", NULL),
-	_OMAP3_BALLENTRY(ETK_D1, "ac6", NULL),
-	_OMAP3_BALLENTRY(ETK_D10, "ac3", NULL),
-	_OMAP3_BALLENTRY(ETK_D11, "ac9", NULL),
-	_OMAP3_BALLENTRY(ETK_D12, "ac10", NULL),
-	_OMAP3_BALLENTRY(ETK_D13, "ad11", NULL),
-	_OMAP3_BALLENTRY(ETK_D14, "ac11", NULL),
-	_OMAP3_BALLENTRY(ETK_D15, "ad12", NULL),
-	_OMAP3_BALLENTRY(ETK_D2, "ac7", NULL),
-	_OMAP3_BALLENTRY(ETK_D3, "ad8", NULL),
-	_OMAP3_BALLENTRY(ETK_D4, "ac5", NULL),
-	_OMAP3_BALLENTRY(ETK_D5, "ad2", NULL),
-	_OMAP3_BALLENTRY(ETK_D6, "ac8", NULL),
-	_OMAP3_BALLENTRY(ETK_D7, "ad9", NULL),
-	_OMAP3_BALLENTRY(ETK_D8, "ac4", NULL),
-	_OMAP3_BALLENTRY(ETK_D9, "ad5", NULL),
-	_OMAP3_BALLENTRY(GPMC_A1, "k4", NULL),
-	_OMAP3_BALLENTRY(GPMC_A10, "g2", NULL),
-	_OMAP3_BALLENTRY(GPMC_A2, "k3", NULL),
-	_OMAP3_BALLENTRY(GPMC_A3, "k2", NULL),
-	_OMAP3_BALLENTRY(GPMC_A4, "j4", NULL),
-	_OMAP3_BALLENTRY(GPMC_A5, "j3", NULL),
-	_OMAP3_BALLENTRY(GPMC_A6, "j2", NULL),
-	_OMAP3_BALLENTRY(GPMC_A7, "j1", NULL),
-	_OMAP3_BALLENTRY(GPMC_A8, "h1", NULL),
-	_OMAP3_BALLENTRY(GPMC_A9, "h2", NULL),
-	_OMAP3_BALLENTRY(GPMC_CLK, "w2", NULL),
-	_OMAP3_BALLENTRY(GPMC_D10, "u1", NULL),
-	_OMAP3_BALLENTRY(GPMC_D11, "r3", NULL),
-	_OMAP3_BALLENTRY(GPMC_D12, "t3", NULL),
-	_OMAP3_BALLENTRY(GPMC_D13, "u2", NULL),
-	_OMAP3_BALLENTRY(GPMC_D14, "v1", NULL),
-	_OMAP3_BALLENTRY(GPMC_D15, "v2", NULL),
-	_OMAP3_BALLENTRY(GPMC_D8, "r2", NULL),
-	_OMAP3_BALLENTRY(GPMC_D9, "t2", NULL),
-	_OMAP3_BALLENTRY(GPMC_NBE0_CLE, "k5", NULL),
-	_OMAP3_BALLENTRY(GPMC_NBE1, "l1", NULL),
-	_OMAP3_BALLENTRY(GPMC_NCS3, "d2", NULL),
-	_OMAP3_BALLENTRY(GPMC_NCS4, "f4", NULL),
-	_OMAP3_BALLENTRY(GPMC_NCS5, "g5", NULL),
-	_OMAP3_BALLENTRY(GPMC_NCS6, "f3", NULL),
-	_OMAP3_BALLENTRY(GPMC_NCS7, "g4", NULL),
-	_OMAP3_BALLENTRY(GPMC_NWP, "e1", NULL),
-	_OMAP3_BALLENTRY(GPMC_WAIT3, "c2", NULL),
-	_OMAP3_BALLENTRY(HDQ_SIO, "a24", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_CLK, "r21", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_DATA0, "t24", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_DATA1, "t23", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_DATA2, "u24", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_DATA3, "u23", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_DATA4, "w24", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_DATA5, "v23", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_DATA6, "w23", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_DATA7, "t22", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_DIR, "p23", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_NXT, "r22", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_STP, "r23", NULL),
-	_OMAP3_BALLENTRY(I2C2_SCL, "ac15", NULL),
-	_OMAP3_BALLENTRY(I2C2_SDA, "ac14", NULL),
-	_OMAP3_BALLENTRY(I2C3_SCL, "ac13", NULL),
-	_OMAP3_BALLENTRY(I2C3_SDA, "ac12", NULL),
-	_OMAP3_BALLENTRY(I2C4_SCL, "y16", NULL),
-	_OMAP3_BALLENTRY(I2C4_SDA, "y15", NULL),
-	_OMAP3_BALLENTRY(JTAG_EMU0, "ac24", NULL),
-	_OMAP3_BALLENTRY(JTAG_EMU1, "ad24", NULL),
-	_OMAP3_BALLENTRY(MCBSP1_CLKR, "w19", NULL),
-	_OMAP3_BALLENTRY(MCBSP1_CLKX, "v18", NULL),
-	_OMAP3_BALLENTRY(MCBSP1_DR, "y18", NULL),
-	_OMAP3_BALLENTRY(MCBSP1_DX, "w18", NULL),
-	_OMAP3_BALLENTRY(MCBSP1_FSR, "ab20", NULL),
-	_OMAP3_BALLENTRY(MCBSP1_FSX, "aa19", NULL),
-	_OMAP3_BALLENTRY(MCBSP2_CLKX, "t21", NULL),
-	_OMAP3_BALLENTRY(MCBSP2_DR, "v19", NULL),
-	_OMAP3_BALLENTRY(MCBSP2_DX, "r20", NULL),
-	_OMAP3_BALLENTRY(MCBSP2_FSX, "v20", NULL),
-	_OMAP3_BALLENTRY(MCBSP3_CLKX, "w4", NULL),
-	_OMAP3_BALLENTRY(MCBSP3_DR, "v5", NULL),
-	_OMAP3_BALLENTRY(MCBSP3_DX, "v6", NULL),
-	_OMAP3_BALLENTRY(MCBSP3_FSX, "v4", NULL),
-	_OMAP3_BALLENTRY(MCBSP_CLKS, "aa18", NULL),
-	_OMAP3_BALLENTRY(MCSPI1_CLK, "t5", NULL),
-	_OMAP3_BALLENTRY(MCSPI1_CS0, "t6", NULL),
-	_OMAP3_BALLENTRY(MCSPI1_CS3, "r5", NULL),
-	_OMAP3_BALLENTRY(MCSPI1_SIMO, "r4", NULL),
-	_OMAP3_BALLENTRY(MCSPI1_SOMI, "t4", NULL),
-	_OMAP3_BALLENTRY(MCSPI2_CLK, "n5", NULL),
-	_OMAP3_BALLENTRY(MCSPI2_CS0, "m5", NULL),
-	_OMAP3_BALLENTRY(MCSPI2_CS1, "m4", NULL),
-	_OMAP3_BALLENTRY(MCSPI2_SIMO, "n4", NULL),
-	_OMAP3_BALLENTRY(MCSPI2_SOMI, "n3", NULL),
-	_OMAP3_BALLENTRY(SDMMC1_CLK, "m23", NULL),
-	_OMAP3_BALLENTRY(SDMMC1_CMD, "l23", NULL),
-	_OMAP3_BALLENTRY(SDMMC1_DAT0, "m22", NULL),
-	_OMAP3_BALLENTRY(SDMMC1_DAT1, "m21", NULL),
-	_OMAP3_BALLENTRY(SDMMC1_DAT2, "m20", NULL),
-	_OMAP3_BALLENTRY(SDMMC1_DAT3, "n23", NULL),
-	_OMAP3_BALLENTRY(SDMMC1_DAT4, "n22", NULL),
-	_OMAP3_BALLENTRY(SDMMC1_DAT5, "n21", NULL),
-	_OMAP3_BALLENTRY(SDMMC1_DAT6, "n20", NULL),
-	_OMAP3_BALLENTRY(SDMMC1_DAT7, "p24", NULL),
-	_OMAP3_BALLENTRY(SDMMC2_CLK, "y1", NULL),
-	_OMAP3_BALLENTRY(SDMMC2_CMD, "ab5", NULL),
-	_OMAP3_BALLENTRY(SDMMC2_DAT0, "ab3", NULL),
-	_OMAP3_BALLENTRY(SDMMC2_DAT1, "y3", NULL),
-	_OMAP3_BALLENTRY(SDMMC2_DAT2, "w3", NULL),
-	_OMAP3_BALLENTRY(SDMMC2_DAT3, "v3", NULL),
-	_OMAP3_BALLENTRY(SDMMC2_DAT4, "ab2", NULL),
-	_OMAP3_BALLENTRY(SDMMC2_DAT5, "aa2", NULL),
-	_OMAP3_BALLENTRY(SDMMC2_DAT6, "y2", NULL),
-	_OMAP3_BALLENTRY(SDMMC2_DAT7, "aa1", NULL),
-	_OMAP3_BALLENTRY(SYS_BOOT0, "ab12", NULL),
-	_OMAP3_BALLENTRY(SYS_BOOT1, "ac16", NULL),
-	_OMAP3_BALLENTRY(SYS_BOOT2, "ad17", NULL),
-	_OMAP3_BALLENTRY(SYS_BOOT3, "ad18", NULL),
-	_OMAP3_BALLENTRY(SYS_BOOT4, "ac17", NULL),
-	_OMAP3_BALLENTRY(SYS_BOOT5, "ab16", NULL),
-	_OMAP3_BALLENTRY(SYS_BOOT6, "aa15", NULL),
-	_OMAP3_BALLENTRY(SYS_CLKOUT1, "y7", NULL),
-	_OMAP3_BALLENTRY(SYS_CLKOUT2, "aa6", NULL),
-	_OMAP3_BALLENTRY(SYS_CLKREQ, "y13", NULL),
-	_OMAP3_BALLENTRY(SYS_NIRQ, "w16", NULL),
-	_OMAP3_BALLENTRY(SYS_NRESWARM, "y10", NULL),
-	_OMAP3_BALLENTRY(SYS_OFF_MODE, "ad23", NULL),
-	_OMAP3_BALLENTRY(UART1_CTS, "ac2", NULL),
-	_OMAP3_BALLENTRY(UART1_RTS, "w6", NULL),
-	_OMAP3_BALLENTRY(UART1_RX, "v7", NULL),
-	_OMAP3_BALLENTRY(UART1_TX, "w7", NULL),
-	_OMAP3_BALLENTRY(UART3_CTS_RCTX, "a23", NULL),
-	_OMAP3_BALLENTRY(UART3_RTS_SD, "b23", NULL),
-	_OMAP3_BALLENTRY(UART3_RX_IRRX, "b24", NULL),
-	_OMAP3_BALLENTRY(UART3_TX_IRTX, "c23", NULL),
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#else
-#define omap3_cus_ball	 NULL
-#endif
-
-/*
- * Signals different on CBB package compared to superset
- */
-#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_OMAP_PACKAGE_CBB)
-static struct omap_mux __initdata omap3_cbb_subset[] = {
-	_OMAP3_MUXENTRY(CAM_D10, 109,
-		"cam_d10", NULL, NULL, NULL,
-		"gpio_109", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_D11, 110,
-		"cam_d11", NULL, NULL, NULL,
-		"gpio_110", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_D2, 101,
-		"cam_d2", NULL, NULL, NULL,
-		"gpio_101", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_D3, 102,
-		"cam_d3", NULL, NULL, NULL,
-		"gpio_102", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_D4, 103,
-		"cam_d4", NULL, NULL, NULL,
-		"gpio_103", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_D5, 104,
-		"cam_d5", NULL, NULL, NULL,
-		"gpio_104", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_FLD, 98,
-		"cam_fld", NULL, "cam_global_reset", NULL,
-		"gpio_98", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_HS, 94,
-		"cam_hs", NULL, NULL, NULL,
-		"gpio_94", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_PCLK, 97,
-		"cam_pclk", NULL, NULL, NULL,
-		"gpio_97", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_STROBE, 126,
-		"cam_strobe", NULL, NULL, NULL,
-		"gpio_126", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_VS, 95,
-		"cam_vs", NULL, NULL, NULL,
-		"gpio_95", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_WEN, 167,
-		"cam_wen", NULL, "cam_shutter", NULL,
-		"gpio_167", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA6, 76,
-		"dss_data6", NULL, "uart1_tx", NULL,
-		"gpio_76", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA7, 77,
-		"dss_data7", NULL, "uart1_rx", NULL,
-		"gpio_77", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA8, 78,
-		"dss_data8", NULL, NULL, NULL,
-		"gpio_78", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA9, 79,
-		"dss_data9", NULL, NULL, NULL,
-		"gpio_79", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_HSYNC, 67,
-		"dss_hsync", NULL, NULL, NULL,
-		"gpio_67", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_PCLK, 66,
-		"dss_pclk", NULL, NULL, NULL,
-		"gpio_66", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(ETK_CLK, 12,
-		"etk_clk", "mcbsp5_clkx", "sdmmc3_clk", "hsusb1_stp",
-		"gpio_12", "mm1_rxdp", "hsusb1_tll_stp", NULL),
-	_OMAP3_MUXENTRY(ETK_CTL, 13,
-		"etk_ctl", NULL, "sdmmc3_cmd", "hsusb1_clk",
-		"gpio_13", NULL, "hsusb1_tll_clk", NULL),
-	_OMAP3_MUXENTRY(ETK_D0, 14,
-		"etk_d0", "mcspi3_simo", "sdmmc3_dat4", "hsusb1_data0",
-		"gpio_14", "mm1_rxrcv", "hsusb1_tll_data0", NULL),
-	_OMAP3_MUXENTRY(ETK_D1, 15,
-		"etk_d1", "mcspi3_somi", NULL, "hsusb1_data1",
-		"gpio_15", "mm1_txse0", "hsusb1_tll_data1", NULL),
-	_OMAP3_MUXENTRY(ETK_D10, 24,
-		"etk_d10", NULL, "uart1_rx", "hsusb2_clk",
-		"gpio_24", NULL, "hsusb2_tll_clk", NULL),
-	_OMAP3_MUXENTRY(ETK_D11, 25,
-		"etk_d11", NULL, NULL, "hsusb2_stp",
-		"gpio_25", "mm2_rxdp", "hsusb2_tll_stp", NULL),
-	_OMAP3_MUXENTRY(ETK_D12, 26,
-		"etk_d12", NULL, NULL, "hsusb2_dir",
-		"gpio_26", NULL, "hsusb2_tll_dir", NULL),
-	_OMAP3_MUXENTRY(ETK_D13, 27,
-		"etk_d13", NULL, NULL, "hsusb2_nxt",
-		"gpio_27", "mm2_rxdm", "hsusb2_tll_nxt", NULL),
-	_OMAP3_MUXENTRY(ETK_D14, 28,
-		"etk_d14", NULL, NULL, "hsusb2_data0",
-		"gpio_28", "mm2_rxrcv", "hsusb2_tll_data0", NULL),
-	_OMAP3_MUXENTRY(ETK_D15, 29,
-		"etk_d15", NULL, NULL, "hsusb2_data1",
-		"gpio_29", "mm2_txse0", "hsusb2_tll_data1", NULL),
-	_OMAP3_MUXENTRY(ETK_D2, 16,
-		"etk_d2", "mcspi3_cs0", NULL, "hsusb1_data2",
-		"gpio_16", "mm1_txdat", "hsusb1_tll_data2", NULL),
-	_OMAP3_MUXENTRY(ETK_D3, 17,
-		"etk_d3", "mcspi3_clk", "sdmmc3_dat3", "hsusb1_data7",
-		"gpio_17", NULL, "hsusb1_tll_data7", NULL),
-	_OMAP3_MUXENTRY(ETK_D4, 18,
-		"etk_d4", "mcbsp5_dr", "sdmmc3_dat0", "hsusb1_data4",
-		"gpio_18", NULL, "hsusb1_tll_data4", NULL),
-	_OMAP3_MUXENTRY(ETK_D5, 19,
-		"etk_d5", "mcbsp5_fsx", "sdmmc3_dat1", "hsusb1_data5",
-		"gpio_19", NULL, "hsusb1_tll_data5", NULL),
-	_OMAP3_MUXENTRY(ETK_D6, 20,
-		"etk_d6", "mcbsp5_dx", "sdmmc3_dat2", "hsusb1_data6",
-		"gpio_20", NULL, "hsusb1_tll_data6", NULL),
-	_OMAP3_MUXENTRY(ETK_D7, 21,
-		"etk_d7", "mcspi3_cs1", "sdmmc3_dat7", "hsusb1_data3",
-		"gpio_21", "mm1_txen_n", "hsusb1_tll_data3", NULL),
-	_OMAP3_MUXENTRY(ETK_D8, 22,
-		"etk_d8", "sys_drm_msecure", "sdmmc3_dat6", "hsusb1_dir",
-		"gpio_22", NULL, "hsusb1_tll_dir", NULL),
-	_OMAP3_MUXENTRY(ETK_D9, 23,
-		"etk_d9", "sys_secure_indicator", "sdmmc3_dat5", "hsusb1_nxt",
-		"gpio_23", "mm1_rxdm", "hsusb1_tll_nxt", NULL),
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#else
-#define omap3_cbb_subset	NULL
-#endif
-
-/*
- * Balls for CBB package
- * 515-pin s-PBGA Package, 0.50mm Ball Pitch (Top), 0.40mm Ball Pitch (Bottom)
- */
-#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS)		\
-		&& defined(CONFIG_OMAP_PACKAGE_CBB)
-static struct omap_ball __initdata omap3_cbb_ball[] = {
-	_OMAP3_BALLENTRY(CAM_D0, "ag17", NULL),
-	_OMAP3_BALLENTRY(CAM_D1, "ah17", NULL),
-	_OMAP3_BALLENTRY(CAM_D10, "b25", NULL),
-	_OMAP3_BALLENTRY(CAM_D11, "c26", NULL),
-	_OMAP3_BALLENTRY(CAM_D2, "b24", NULL),
-	_OMAP3_BALLENTRY(CAM_D3, "c24", NULL),
-	_OMAP3_BALLENTRY(CAM_D4, "d24", NULL),
-	_OMAP3_BALLENTRY(CAM_D5, "a25", NULL),
-	_OMAP3_BALLENTRY(CAM_D6, "k28", NULL),
-	_OMAP3_BALLENTRY(CAM_D7, "l28", NULL),
-	_OMAP3_BALLENTRY(CAM_D8, "k27", NULL),
-	_OMAP3_BALLENTRY(CAM_D9, "l27", NULL),
-	_OMAP3_BALLENTRY(CAM_FLD, "c23", NULL),
-	_OMAP3_BALLENTRY(CAM_HS, "a24", NULL),
-	_OMAP3_BALLENTRY(CAM_PCLK, "c27", NULL),
-	_OMAP3_BALLENTRY(CAM_STROBE, "d25", NULL),
-	_OMAP3_BALLENTRY(CAM_VS, "a23", NULL),
-	_OMAP3_BALLENTRY(CAM_WEN, "b23", NULL),
-	_OMAP3_BALLENTRY(CAM_XCLKA, "c25", NULL),
-	_OMAP3_BALLENTRY(CAM_XCLKB, "b26", NULL),
-	_OMAP3_BALLENTRY(CSI2_DX0, "ag19", NULL),
-	_OMAP3_BALLENTRY(CSI2_DX1, "ag18", NULL),
-	_OMAP3_BALLENTRY(CSI2_DY0, "ah19", NULL),
-	_OMAP3_BALLENTRY(CSI2_DY1, "ah18", NULL),
-	_OMAP3_BALLENTRY(DSS_ACBIAS, "e27", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA0, "ag22", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA1, "ah22", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA10, "ad28", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA11, "ad27", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA12, "ab28", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA13, "ab27", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA14, "aa28", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA15, "aa27", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA16, "g25", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA17, "h27", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA18, "h26", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA19, "h25", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA2, "ag23", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA20, "e28", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA21, "j26", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA22, "ac27", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA23, "ac28", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA3, "ah23", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA4, "ag24", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA5, "ah24", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA6, "e26", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA7, "f28", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA8, "f27", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA9, "g26", NULL),
-	_OMAP3_BALLENTRY(DSS_HSYNC, "d26", NULL),
-	_OMAP3_BALLENTRY(DSS_PCLK, "d28", NULL),
-	_OMAP3_BALLENTRY(DSS_VSYNC, "d27", NULL),
-	_OMAP3_BALLENTRY(ETK_CLK, "af10", NULL),
-	_OMAP3_BALLENTRY(ETK_CTL, "ae10", NULL),
-	_OMAP3_BALLENTRY(ETK_D0, "af11", NULL),
-	_OMAP3_BALLENTRY(ETK_D1, "ag12", NULL),
-	_OMAP3_BALLENTRY(ETK_D10, "ae7", NULL),
-	_OMAP3_BALLENTRY(ETK_D11, "af7", NULL),
-	_OMAP3_BALLENTRY(ETK_D12, "ag7", NULL),
-	_OMAP3_BALLENTRY(ETK_D13, "ah7", NULL),
-	_OMAP3_BALLENTRY(ETK_D14, "ag8", NULL),
-	_OMAP3_BALLENTRY(ETK_D15, "ah8", NULL),
-	_OMAP3_BALLENTRY(ETK_D2, "ah12", NULL),
-	_OMAP3_BALLENTRY(ETK_D3, "ae13", NULL),
-	_OMAP3_BALLENTRY(ETK_D4, "ae11", NULL),
-	_OMAP3_BALLENTRY(ETK_D5, "ah9", NULL),
-	_OMAP3_BALLENTRY(ETK_D6, "af13", NULL),
-	_OMAP3_BALLENTRY(ETK_D7, "ah14", NULL),
-	_OMAP3_BALLENTRY(ETK_D8, "af9", NULL),
-	_OMAP3_BALLENTRY(ETK_D9, "ag9", NULL),
-	_OMAP3_BALLENTRY(GPMC_A1, "n4", "ac15"),
-	_OMAP3_BALLENTRY(GPMC_A10, "k3", "ab19"),
-	_OMAP3_BALLENTRY(GPMC_A2, "m4", "ab15"),
-	_OMAP3_BALLENTRY(GPMC_A3, "l4", "ac16"),
-	_OMAP3_BALLENTRY(GPMC_A4, "k4", "ab16"),
-	_OMAP3_BALLENTRY(GPMC_A5, "t3", "ac17"),
-	_OMAP3_BALLENTRY(GPMC_A6, "r3", "ab17"),
-	_OMAP3_BALLENTRY(GPMC_A7, "n3", "ac18"),
-	_OMAP3_BALLENTRY(GPMC_A8, "m3", "ab18"),
-	_OMAP3_BALLENTRY(GPMC_A9, "l3", "ac19"),
-	_OMAP3_BALLENTRY(GPMC_CLK, "t4", "w2"),
-	_OMAP3_BALLENTRY(GPMC_D10, "p1", "ab4"),
-	_OMAP3_BALLENTRY(GPMC_D11, "r1", "ac4"),
-	_OMAP3_BALLENTRY(GPMC_D12, "r2", "ab6"),
-	_OMAP3_BALLENTRY(GPMC_D13, "t2", "ac6"),
-	_OMAP3_BALLENTRY(GPMC_D14, "w1", "ab7"),
-	_OMAP3_BALLENTRY(GPMC_D15, "y1", "ac7"),
-	_OMAP3_BALLENTRY(GPMC_D8, "h2", "ab3"),
-	_OMAP3_BALLENTRY(GPMC_D9, "k2", "ac3"),
-	_OMAP3_BALLENTRY(GPMC_NBE0_CLE, "g3", "ac12"),
-	_OMAP3_BALLENTRY(GPMC_NBE1, "u3", NULL),
-	_OMAP3_BALLENTRY(GPMC_NCS1, "h3", "y1"),
-	_OMAP3_BALLENTRY(GPMC_NCS2, "v8", NULL),
-	_OMAP3_BALLENTRY(GPMC_NCS3, "u8", NULL),
-	_OMAP3_BALLENTRY(GPMC_NCS4, "t8", NULL),
-	_OMAP3_BALLENTRY(GPMC_NCS5, "r8", NULL),
-	_OMAP3_BALLENTRY(GPMC_NCS6, "p8", NULL),
-	_OMAP3_BALLENTRY(GPMC_NCS7, "n8", NULL),
-	_OMAP3_BALLENTRY(GPMC_NWP, "h1", "ab10"),
-	_OMAP3_BALLENTRY(GPMC_WAIT1, "l8", "ac10"),
-	_OMAP3_BALLENTRY(GPMC_WAIT2, "k8", NULL),
-	_OMAP3_BALLENTRY(GPMC_WAIT3, "j8", NULL),
-	_OMAP3_BALLENTRY(HDQ_SIO, "j25", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_CLK, "t28", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_DATA0, "t27", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_DATA1, "u28", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_DATA2, "u27", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_DATA3, "u26", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_DATA4, "u25", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_DATA5, "v28", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_DATA6, "v27", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_DATA7, "v26", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_DIR, "r28", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_NXT, "t26", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_STP, "t25", NULL),
-	_OMAP3_BALLENTRY(I2C2_SCL, "af15", NULL),
-	_OMAP3_BALLENTRY(I2C2_SDA, "ae15", NULL),
-	_OMAP3_BALLENTRY(I2C3_SCL, "af14", NULL),
-	_OMAP3_BALLENTRY(I2C3_SDA, "ag14", NULL),
-	_OMAP3_BALLENTRY(I2C4_SCL, "ad26", NULL),
-	_OMAP3_BALLENTRY(I2C4_SDA, "ae26", NULL),
-	_OMAP3_BALLENTRY(JTAG_EMU0, "aa11", NULL),
-	_OMAP3_BALLENTRY(JTAG_EMU1, "aa10", NULL),
-	_OMAP3_BALLENTRY(MCBSP1_CLKR, "y21", NULL),
-	_OMAP3_BALLENTRY(MCBSP1_CLKX, "w21", NULL),
-	_OMAP3_BALLENTRY(MCBSP1_DR, "u21", NULL),
-	_OMAP3_BALLENTRY(MCBSP1_DX, "v21", NULL),
-	_OMAP3_BALLENTRY(MCBSP1_FSR, "aa21", NULL),
-	_OMAP3_BALLENTRY(MCBSP1_FSX, "k26", NULL),
-	_OMAP3_BALLENTRY(MCBSP2_CLKX, "n21", NULL),
-	_OMAP3_BALLENTRY(MCBSP2_DR, "r21", NULL),
-	_OMAP3_BALLENTRY(MCBSP2_DX, "m21", NULL),
-	_OMAP3_BALLENTRY(MCBSP2_FSX, "p21", NULL),
-	_OMAP3_BALLENTRY(MCBSP3_CLKX, "af5", NULL),
-	_OMAP3_BALLENTRY(MCBSP3_DR, "ae6", NULL),
-	_OMAP3_BALLENTRY(MCBSP3_DX, "af6", NULL),
-	_OMAP3_BALLENTRY(MCBSP3_FSX, "ae5", NULL),
-	_OMAP3_BALLENTRY(MCBSP4_CLKX, "ae1", NULL),
-	_OMAP3_BALLENTRY(MCBSP4_DR, "ad1", NULL),
-	_OMAP3_BALLENTRY(MCBSP4_DX, "ad2", NULL),
-	_OMAP3_BALLENTRY(MCBSP4_FSX, "ac1", NULL),
-	_OMAP3_BALLENTRY(MCBSP_CLKS, "t21", NULL),
-	_OMAP3_BALLENTRY(MCSPI1_CLK, "ab3", NULL),
-	_OMAP3_BALLENTRY(MCSPI1_CS0, "ac2", NULL),
-	_OMAP3_BALLENTRY(MCSPI1_CS1, "ac3", NULL),
-	_OMAP3_BALLENTRY(MCSPI1_CS2, "ab1", NULL),
-	_OMAP3_BALLENTRY(MCSPI1_CS3, "ab2", NULL),
-	_OMAP3_BALLENTRY(MCSPI1_SIMO, "ab4", NULL),
-	_OMAP3_BALLENTRY(MCSPI1_SOMI, "aa4", NULL),
-	_OMAP3_BALLENTRY(MCSPI2_CLK, "aa3", NULL),
-	_OMAP3_BALLENTRY(MCSPI2_CS0, "y4", NULL),
-	_OMAP3_BALLENTRY(MCSPI2_CS1, "v3", NULL),
-	_OMAP3_BALLENTRY(MCSPI2_SIMO, "y2", NULL),
-	_OMAP3_BALLENTRY(MCSPI2_SOMI, "y3", NULL),
-	_OMAP3_BALLENTRY(SDMMC1_CLK, "n28", NULL),
-	_OMAP3_BALLENTRY(SDMMC1_CMD, "m27", NULL),
-	_OMAP3_BALLENTRY(SDMMC1_DAT0, "n27", NULL),
-	_OMAP3_BALLENTRY(SDMMC1_DAT1, "n26", NULL),
-	_OMAP3_BALLENTRY(SDMMC1_DAT2, "n25", NULL),
-	_OMAP3_BALLENTRY(SDMMC1_DAT3, "p28", NULL),
-	_OMAP3_BALLENTRY(SDMMC1_DAT4, "p27", NULL),
-	_OMAP3_BALLENTRY(SDMMC1_DAT5, "p26", NULL),
-	_OMAP3_BALLENTRY(SDMMC1_DAT6, "r27", NULL),
-	_OMAP3_BALLENTRY(SDMMC1_DAT7, "r25", NULL),
-	_OMAP3_BALLENTRY(SDMMC2_CLK, "ae2", NULL),
-	_OMAP3_BALLENTRY(SDMMC2_CMD, "ag5", NULL),
-	_OMAP3_BALLENTRY(SDMMC2_DAT0, "ah5", NULL),
-	_OMAP3_BALLENTRY(SDMMC2_DAT1, "ah4", NULL),
-	_OMAP3_BALLENTRY(SDMMC2_DAT2, "ag4", NULL),
-	_OMAP3_BALLENTRY(SDMMC2_DAT3, "af4", NULL),
-	_OMAP3_BALLENTRY(SDMMC2_DAT4, "ae4", NULL),
-	_OMAP3_BALLENTRY(SDMMC2_DAT5, "ah3", NULL),
-	_OMAP3_BALLENTRY(SDMMC2_DAT6, "af3", NULL),
-	_OMAP3_BALLENTRY(SDMMC2_DAT7, "ae3", NULL),
-	_OMAP3_BALLENTRY(SYS_BOOT0, "ah26", NULL),
-	_OMAP3_BALLENTRY(SYS_BOOT1, "ag26", NULL),
-	_OMAP3_BALLENTRY(SYS_BOOT2, "ae14", NULL),
-	_OMAP3_BALLENTRY(SYS_BOOT3, "af18", NULL),
-	_OMAP3_BALLENTRY(SYS_BOOT4, "af19", NULL),
-	_OMAP3_BALLENTRY(SYS_BOOT5, "ae21", NULL),
-	_OMAP3_BALLENTRY(SYS_BOOT6, "af21", NULL),
-	_OMAP3_BALLENTRY(SYS_CLKOUT1, "ag25", NULL),
-	_OMAP3_BALLENTRY(SYS_CLKOUT2, "ae22", NULL),
-	_OMAP3_BALLENTRY(SYS_CLKREQ, "af25", NULL),
-	_OMAP3_BALLENTRY(SYS_NIRQ, "af26", NULL),
-	_OMAP3_BALLENTRY(SYS_NRESWARM, "af24", NULL),
-	_OMAP3_BALLENTRY(SYS_OFF_MODE, "af22", NULL),
-	_OMAP3_BALLENTRY(UART1_CTS, "w8", NULL),
-	_OMAP3_BALLENTRY(UART1_RTS, "aa9", NULL),
-	_OMAP3_BALLENTRY(UART1_RX, "y8", NULL),
-	_OMAP3_BALLENTRY(UART1_TX, "aa8", NULL),
-	_OMAP3_BALLENTRY(UART2_CTS, "ab26", NULL),
-	_OMAP3_BALLENTRY(UART2_RTS, "ab25", NULL),
-	_OMAP3_BALLENTRY(UART2_RX, "ad25", NULL),
-	_OMAP3_BALLENTRY(UART2_TX, "aa25", NULL),
-	_OMAP3_BALLENTRY(UART3_CTS_RCTX, "h18", NULL),
-	_OMAP3_BALLENTRY(UART3_RTS_SD, "h19", NULL),
-	_OMAP3_BALLENTRY(UART3_RX_IRRX, "h20", NULL),
-	_OMAP3_BALLENTRY(UART3_TX_IRTX, "h21", NULL),
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#else
-#define omap3_cbb_ball	 NULL
-#endif
-
-/*
- * Signals different on 36XX CBP package compared to 34XX CBC package
- */
-#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_OMAP_PACKAGE_CBP)
-static struct omap_mux __initdata omap36xx_cbp_subset[] = {
-	_OMAP3_MUXENTRY(CAM_D0, 99,
-		"cam_d0", NULL, "csi2_dx2", NULL,
-		"gpio_99", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_D1, 100,
-		"cam_d1", NULL, "csi2_dy2", NULL,
-		"gpio_100", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_D10, 109,
-		"cam_d10", "ssi2_wake", NULL, NULL,
-		"gpio_109", "hw_dbg8", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_D2, 101,
-		"cam_d2", "ssi2_rdy_tx", NULL, NULL,
-		"gpio_101", "hw_dbg4", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_D3, 102,
-		"cam_d3", "ssi2_dat_rx", NULL, NULL,
-		"gpio_102", "hw_dbg5", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_D4, 103,
-		"cam_d4", "ssi2_flag_rx", NULL, NULL,
-		"gpio_103", "hw_dbg6", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_D5, 104,
-		"cam_d5", "ssi2_rdy_rx", NULL, NULL,
-		"gpio_104", "hw_dbg7", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_HS, 94,
-		"cam_hs", "ssi2_dat_tx", NULL, NULL,
-		"gpio_94", "hw_dbg0", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_VS, 95,
-		"cam_vs", "ssi2_flag_tx", NULL, NULL,
-		"gpio_95", "hw_dbg1", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA0, 70,
-		"dss_data0", "dsi_dx0", "uart1_cts", NULL,
-		"gpio_70", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA1, 71,
-		"dss_data1", "dsi_dy0", "uart1_rts", NULL,
-		"gpio_71", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA2, 72,
-		"dss_data2", "dsi_dx1", NULL, NULL,
-		"gpio_72", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA3, 73,
-		"dss_data3", "dsi_dy1", NULL, NULL,
-		"gpio_73", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA4, 74,
-		"dss_data4", "dsi_dx2", "uart3_rx_irrx", NULL,
-		"gpio_74", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA5, 75,
-		"dss_data5", "dsi_dy2", "uart3_tx_irtx", NULL,
-		"gpio_75", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA6, 76,
-		"dss_data6", NULL, "uart1_tx", "dssvenc656_data6",
-		"gpio_76", "hw_dbg14", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA7, 77,
-		"dss_data7", NULL, "uart1_rx", "dssvenc656_data7",
-		"gpio_77", "hw_dbg15", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA8, 78,
-		"dss_data8", NULL, "uart3_rx_irrx", NULL,
-		"gpio_78", "hw_dbg16", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA9, 79,
-		"dss_data9", NULL, "uart3_tx_irtx", NULL,
-		"gpio_79", "hw_dbg17", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(ETK_D12, 26,
-		"etk_d12", "sys_drm_msecure", NULL, "hsusb2_dir",
-		"gpio_26", NULL, "hsusb2_tll_dir", "hw_dbg14"),
-	_OMAP3_MUXENTRY(GPMC_A11, 0,
-		"gpmc_a11", NULL, NULL, NULL,
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(GPMC_WAIT2, 64,
-		"gpmc_wait2", NULL, "uart4_tx", NULL,
-		"gpio_64", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(GPMC_WAIT3, 65,
-		"gpmc_wait3", "sys_ndmareq1", "uart4_rx", NULL,
-		"gpio_65", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(HSUSB0_DATA0, 125,
-		"hsusb0_data0", NULL, "uart3_tx_irtx", NULL,
-		"gpio_125", "uart2_tx", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(HSUSB0_DATA1, 130,
-		"hsusb0_data1", NULL, "uart3_rx_irrx", NULL,
-		"gpio_130", "uart2_rx", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(HSUSB0_DATA2, 131,
-		"hsusb0_data2", NULL, "uart3_rts_sd", NULL,
-		"gpio_131", "uart2_rts", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(HSUSB0_DATA3, 169,
-		"hsusb0_data3", NULL, "uart3_cts_rctx", NULL,
-		"gpio_169", "uart2_cts", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(MCBSP1_CLKR, 156,
-		"mcbsp1_clkr", "mcspi4_clk", "sim_cd", NULL,
-		"gpio_156", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(MCBSP1_FSR, 157,
-		"mcbsp1_fsr", "adpllv2d_dithering_en1",
-		"cam_global_reset", NULL,
-		"gpio_157", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(MCBSP4_CLKX, 152,
-		"mcbsp4_clkx", "ssi1_dat_rx", NULL, NULL,
-		"gpio_152", "hsusb3_tll_data1", "mm3_txse0", "safe_mode"),
-	_OMAP3_MUXENTRY(MCBSP4_DR, 153,
-		"mcbsp4_dr", "ssi1_flag_rx", NULL, NULL,
-		"gpio_153", "hsusb3_tll_data0", "mm3_rxrcv", "safe_mode"),
-	_OMAP3_MUXENTRY(MCBSP4_DX, 154,
-		"mcbsp4_dx", "ssi1_rdy_rx", NULL, NULL,
-		"gpio_154", "hsusb3_tll_data2", "mm3_txdat", "safe_mode"),
-	_OMAP3_MUXENTRY(MCBSP4_FSX, 155,
-		"mcbsp4_fsx", "ssi1_wake", NULL, NULL,
-		"gpio_155", "hsusb3_tll_data3", "mm3_txen_n", "safe_mode"),
-	_OMAP3_MUXENTRY(MCSPI1_CS1, 175,
-		"mcspi1_cs1", "adpllv2d_dithering_en2", NULL, "sdmmc3_cmd",
-		"gpio_175", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SAD2D_MBUSFLAG, 0,
-		"sad2d_mbusflag", "mad2d_sbusflag", NULL, NULL,
-		NULL, NULL, NULL, NULL),
-	_OMAP3_MUXENTRY(SAD2D_MCAD28, 0,
-		"sad2d_mcad28", "mad2d_mcad28", NULL, NULL,
-		NULL, NULL, NULL, NULL),
-	_OMAP3_MUXENTRY(SAD2D_MCAD29, 0,
-		"sad2d_mcad29", "mad2d_mcad29", NULL, NULL,
-		NULL, NULL, NULL, NULL),
-	_OMAP3_MUXENTRY(SAD2D_MCAD32, 0,
-		"sad2d_mcad32", "mad2d_mcad32", NULL, NULL,
-		NULL, NULL, NULL, NULL),
-	_OMAP3_MUXENTRY(SAD2D_MCAD33, 0,
-		"sad2d_mcad33", "mad2d_mcad33", NULL, NULL,
-		NULL, NULL, NULL, NULL),
-	_OMAP3_MUXENTRY(SAD2D_MCAD34, 0,
-		"sad2d_mcad34", "mad2d_mcad34", NULL, NULL,
-		NULL, NULL, NULL, NULL),
-	_OMAP3_MUXENTRY(SAD2D_MCAD35, 0,
-		"sad2d_mcad35", "mad2d_mcad35", NULL, NULL,
-		NULL, NULL, NULL, NULL),
-	_OMAP3_MUXENTRY(SAD2D_MCAD36, 0,
-		"sad2d_mcad36", "mad2d_mcad36", NULL, NULL,
-		NULL, NULL, NULL, NULL),
-	_OMAP3_MUXENTRY(SAD2D_MREAD, 0,
-		"sad2d_mread", "mad2d_sread", NULL, NULL,
-		NULL, NULL, NULL, NULL),
-	_OMAP3_MUXENTRY(SAD2D_MWRITE, 0,
-		"sad2d_mwrite", "mad2d_swrite", NULL, NULL,
-		NULL, NULL, NULL, NULL),
-	_OMAP3_MUXENTRY(SAD2D_SBUSFLAG, 0,
-		"sad2d_sbusflag", "mad2d_mbusflag", NULL, NULL,
-		NULL, NULL, NULL, NULL),
-	_OMAP3_MUXENTRY(SAD2D_SREAD, 0,
-		"sad2d_sread", "mad2d_mread", NULL, NULL,
-		NULL, NULL, NULL, NULL),
-	_OMAP3_MUXENTRY(SAD2D_SWRITE, 0,
-		"sad2d_swrite", "mad2d_mwrite", NULL, NULL,
-		NULL, NULL, NULL, NULL),
-	_OMAP3_MUXENTRY(SDMMC1_CLK, 120,
-		"sdmmc1_clk", "ms_clk", NULL, NULL,
-		"gpio_120", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SDMMC1_CMD, 121,
-		"sdmmc1_cmd", "ms_bs", NULL, NULL,
-		"gpio_121", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SDMMC1_DAT0, 122,
-		"sdmmc1_dat0", "ms_dat0", NULL, NULL,
-		"gpio_122", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SDMMC1_DAT1, 123,
-		"sdmmc1_dat1", "ms_dat1", NULL, NULL,
-		"gpio_123", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SDMMC1_DAT2, 124,
-		"sdmmc1_dat2", "ms_dat2", NULL, NULL,
-		"gpio_124", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SDMMC1_DAT3, 125,
-		"sdmmc1_dat3", "ms_dat3", NULL, NULL,
-		"gpio_125", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SDRC_CKE0, 0,
-		"sdrc_cke0", NULL, NULL, NULL,
-		NULL, NULL, NULL, "safe_mode_out1"),
-	_OMAP3_MUXENTRY(SDRC_CKE1, 0,
-		"sdrc_cke1", NULL, NULL, NULL,
-		NULL, NULL, NULL, "safe_mode_out1"),
-	_OMAP3_MUXENTRY(SIM_IO, 126,
-		"sim_io", "sim_io_low_impedance", NULL, NULL,
-		"gpio_126", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SIM_CLK, 127,
-		"sim_clk", NULL, NULL, NULL,
-		"gpio_127", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SIM_PWRCTRL, 128,
-		"sim_pwrctrl", NULL, NULL, NULL,
-		"gpio_128", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SIM_RST, 129,
-		"sim_rst", NULL, NULL, NULL,
-		"gpio_129", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SYS_BOOT0, 2,
-		"sys_boot0", NULL, NULL, "dss_data18",
-		"gpio_2", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SYS_BOOT1, 3,
-		"sys_boot1", NULL, NULL, "dss_data19",
-		"gpio_3", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SYS_BOOT3, 5,
-		"sys_boot3", NULL, NULL, "dss_data20",
-		"gpio_5", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SYS_BOOT4, 6,
-		"sys_boot4", "sdmmc2_dir_dat2", NULL, "dss_data21",
-		"gpio_6", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SYS_BOOT5, 7,
-		"sys_boot5", "sdmmc2_dir_dat3", NULL, "dss_data22",
-		"gpio_7", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SYS_BOOT6, 8,
-		"sys_boot6", NULL, NULL, "dss_data23",
-		"gpio_8", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(UART1_CTS, 150,
-		"uart1_cts", "ssi1_rdy_tx", NULL, NULL,
-		"gpio_150", "hsusb3_tll_clk", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(UART1_RTS, 149,
-		"uart1_rts", "ssi1_flag_tx", NULL, NULL,
-		"gpio_149", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(UART1_TX, 148,
-		"uart1_tx", "ssi1_dat_tx", NULL, NULL,
-		"gpio_148", NULL, NULL, "safe_mode"),
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#else
-#define omap36xx_cbp_subset	NULL
-#endif
-
-/*
- * Balls for 36XX CBP package
- * 515-pin s-PBGA Package, 0.50mm Ball Pitch (Top), 0.40mm Ball Pitch (Bottom)
- */
-#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS)		\
-		&& defined (CONFIG_OMAP_PACKAGE_CBP)
-static struct omap_ball __initdata omap36xx_cbp_ball[] = {
-	_OMAP3_BALLENTRY(CAM_D0, "ag17", NULL),
-	_OMAP3_BALLENTRY(CAM_D1, "ah17", NULL),
-	_OMAP3_BALLENTRY(CAM_D10, "b25", NULL),
-	_OMAP3_BALLENTRY(CAM_D11, "c26", NULL),
-	_OMAP3_BALLENTRY(CAM_D2, "b24", NULL),
-	_OMAP3_BALLENTRY(CAM_D3, "c24", NULL),
-	_OMAP3_BALLENTRY(CAM_D4, "d24", NULL),
-	_OMAP3_BALLENTRY(CAM_D5, "a25", NULL),
-	_OMAP3_BALLENTRY(CAM_D6, "k28", NULL),
-	_OMAP3_BALLENTRY(CAM_D7, "l28", NULL),
-	_OMAP3_BALLENTRY(CAM_D8, "k27", NULL),
-	_OMAP3_BALLENTRY(CAM_D9, "l27", NULL),
-	_OMAP3_BALLENTRY(CAM_FLD, "c23", NULL),
-	_OMAP3_BALLENTRY(CAM_HS, "a24", NULL),
-	_OMAP3_BALLENTRY(CAM_PCLK, "c27", NULL),
-	_OMAP3_BALLENTRY(CAM_STROBE, "d25", NULL),
-	_OMAP3_BALLENTRY(CAM_VS, "a23", NULL),
-	_OMAP3_BALLENTRY(CAM_WEN, "b23", NULL),
-	_OMAP3_BALLENTRY(CAM_XCLKA, "c25", NULL),
-	_OMAP3_BALLENTRY(CAM_XCLKB, "b26", NULL),
-	_OMAP3_BALLENTRY(CSI2_DX0, "ag19", NULL),
-	_OMAP3_BALLENTRY(CSI2_DX1, "ag18", NULL),
-	_OMAP3_BALLENTRY(CSI2_DY0, "ah19", NULL),
-	_OMAP3_BALLENTRY(CSI2_DY1, "ah18", NULL),
-	_OMAP3_BALLENTRY(DSS_ACBIAS, "e27", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA0, "ag22", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA1, "ah22", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA10, "ad28", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA11, "ad27", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA12, "ab28", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA13, "ab27", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA14, "aa28", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA15, "aa27", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA16, "g25", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA17, "h27", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA18, "h26", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA19, "h25", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA2, "ag23", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA20, "e28", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA21, "j26", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA22, "ac27", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA23, "ac28", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA3, "ah23", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA4, "ag24", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA5, "ah24", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA6, "e26", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA7, "f28", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA8, "f27", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA9, "g26", NULL),
-	_OMAP3_BALLENTRY(DSS_HSYNC, "d26", NULL),
-	_OMAP3_BALLENTRY(DSS_PCLK, "d28", NULL),
-	_OMAP3_BALLENTRY(DSS_VSYNC, "d27", NULL),
-	_OMAP3_BALLENTRY(ETK_CLK, "af10", NULL),
-	_OMAP3_BALLENTRY(ETK_CTL, "ae10", NULL),
-	_OMAP3_BALLENTRY(ETK_D0, "af11", NULL),
-	_OMAP3_BALLENTRY(ETK_D1, "ag12", NULL),
-	_OMAP3_BALLENTRY(ETK_D10, "ae7", NULL),
-	_OMAP3_BALLENTRY(ETK_D11, "af7", NULL),
-	_OMAP3_BALLENTRY(ETK_D12, "ag7", NULL),
-	_OMAP3_BALLENTRY(ETK_D13, "ah7", NULL),
-	_OMAP3_BALLENTRY(ETK_D14, "ag8", NULL),
-	_OMAP3_BALLENTRY(ETK_D15, "ah8", NULL),
-	_OMAP3_BALLENTRY(ETK_D2, "ah12", NULL),
-	_OMAP3_BALLENTRY(ETK_D3, "ae13", NULL),
-	_OMAP3_BALLENTRY(ETK_D4, "ae11", NULL),
-	_OMAP3_BALLENTRY(ETK_D5, "ah9", NULL),
-	_OMAP3_BALLENTRY(ETK_D6, "af13", NULL),
-	_OMAP3_BALLENTRY(ETK_D7, "ah14", NULL),
-	_OMAP3_BALLENTRY(ETK_D8, "af9", NULL),
-	_OMAP3_BALLENTRY(ETK_D9, "ag9", NULL),
-	_OMAP3_BALLENTRY(GPMC_A1, "n4", "ac15"),
-	_OMAP3_BALLENTRY(GPMC_A10, "k3", "ab19"),
-	_OMAP3_BALLENTRY(GPMC_A11, NULL, "ac20"),
-	_OMAP3_BALLENTRY(GPMC_A2, "m4", "ab15"),
-	_OMAP3_BALLENTRY(GPMC_A3, "l4", "ac16"),
-	_OMAP3_BALLENTRY(GPMC_A4, "k4", "ab16"),
-	_OMAP3_BALLENTRY(GPMC_A5, "t3", "ac17"),
-	_OMAP3_BALLENTRY(GPMC_A6, "r3", "ab17"),
-	_OMAP3_BALLENTRY(GPMC_A7, "n3", "ac18"),
-	_OMAP3_BALLENTRY(GPMC_A8, "m3", "ab18"),
-	_OMAP3_BALLENTRY(GPMC_A9, "l3", "ac19"),
-	_OMAP3_BALLENTRY(GPMC_CLK, "t4", "w2"),
-	_OMAP3_BALLENTRY(GPMC_D10, "p1", "ab4"),
-	_OMAP3_BALLENTRY(GPMC_D11, "r1", "ac4"),
-	_OMAP3_BALLENTRY(GPMC_D12, "r2", "ab6"),
-	_OMAP3_BALLENTRY(GPMC_D13, "t2", "ac6"),
-	_OMAP3_BALLENTRY(GPMC_D14, "w1", "ab7"),
-	_OMAP3_BALLENTRY(GPMC_D15, "y1", "ac7"),
-	_OMAP3_BALLENTRY(GPMC_D9, "k2", "ac3"),
-	_OMAP3_BALLENTRY(GPMC_NBE0_CLE, "g3", "ac12"),
-	_OMAP3_BALLENTRY(GPMC_NBE1, "u3", NULL),
-	_OMAP3_BALLENTRY(GPMC_NCS1, "h3", "y1"),
-	_OMAP3_BALLENTRY(GPMC_NCS2, "v8", NULL),
-	_OMAP3_BALLENTRY(GPMC_NCS3, "u8", NULL),
-	_OMAP3_BALLENTRY(GPMC_NCS4, "t8", NULL),
-	_OMAP3_BALLENTRY(GPMC_NCS5, "r8", NULL),
-	_OMAP3_BALLENTRY(GPMC_NCS6, "p8", NULL),
-	_OMAP3_BALLENTRY(GPMC_NCS7, "n8", NULL),
-	_OMAP3_BALLENTRY(GPMC_NWP, "h1", "ab10"),
-	_OMAP3_BALLENTRY(GPMC_WAIT1, "l8", "ac10"),
-	_OMAP3_BALLENTRY(GPMC_WAIT2, "k8", NULL),
-	_OMAP3_BALLENTRY(GPMC_WAIT3, "j8", NULL),
-	_OMAP3_BALLENTRY(HDQ_SIO, "j25", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_CLK, "t28", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_DATA0, "t27", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_DATA1, "u28", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_DATA2, "u27", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_DATA3, "u26", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_DATA4, "u25", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_DATA5, "v28", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_DATA6, "v27", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_DATA7, "v26", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_DIR, "r28", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_NXT, "t26", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_STP, "t25", NULL),
-	_OMAP3_BALLENTRY(I2C2_SCL, "af15", NULL),
-	_OMAP3_BALLENTRY(I2C2_SDA, "ae15", NULL),
-	_OMAP3_BALLENTRY(I2C3_SCL, "af14", NULL),
-	_OMAP3_BALLENTRY(I2C3_SDA, "ag14", NULL),
-	_OMAP3_BALLENTRY(I2C4_SCL, "ad26", NULL),
-	_OMAP3_BALLENTRY(I2C4_SDA, "ae26", NULL),
-	_OMAP3_BALLENTRY(JTAG_EMU0, "aa11", NULL),
-	_OMAP3_BALLENTRY(JTAG_EMU1, "aa10", NULL),
-	_OMAP3_BALLENTRY(MCBSP1_CLKR, "y21", NULL),
-	_OMAP3_BALLENTRY(MCBSP1_CLKX, "w21", NULL),
-	_OMAP3_BALLENTRY(MCBSP1_DR, "u21", NULL),
-	_OMAP3_BALLENTRY(MCBSP1_DX, "v21", NULL),
-	_OMAP3_BALLENTRY(MCBSP1_FSR, "aa21", NULL),
-	_OMAP3_BALLENTRY(MCBSP1_FSX, "k26", NULL),
-	_OMAP3_BALLENTRY(MCBSP2_CLKX, "n21", NULL),
-	_OMAP3_BALLENTRY(MCBSP2_DR, "r21", NULL),
-	_OMAP3_BALLENTRY(MCBSP2_DX, "m21", NULL),
-	_OMAP3_BALLENTRY(MCBSP2_FSX, "p21", NULL),
-	_OMAP3_BALLENTRY(MCBSP3_CLKX, "af5", NULL),
-	_OMAP3_BALLENTRY(MCBSP3_DR, "ae6", NULL),
-	_OMAP3_BALLENTRY(MCBSP3_DX, "af6", NULL),
-	_OMAP3_BALLENTRY(MCBSP3_FSX, "ae5", NULL),
-	_OMAP3_BALLENTRY(MCBSP4_CLKX, "ae1", NULL),
-	_OMAP3_BALLENTRY(MCBSP4_DR, "ad1", NULL),
-	_OMAP3_BALLENTRY(MCBSP4_DX, "ad2", NULL),
-	_OMAP3_BALLENTRY(MCBSP4_FSX, "ac1", NULL),
-	_OMAP3_BALLENTRY(MCBSP_CLKS, "t21", NULL),
-	_OMAP3_BALLENTRY(MCSPI1_CLK, "ab3", NULL),
-	_OMAP3_BALLENTRY(MCSPI1_CS0, "ac2", NULL),
-	_OMAP3_BALLENTRY(MCSPI1_CS1, "ac3", NULL),
-	_OMAP3_BALLENTRY(MCSPI1_CS2, "ab1", NULL),
-	_OMAP3_BALLENTRY(MCSPI1_CS3, "ab2", NULL),
-	_OMAP3_BALLENTRY(MCSPI1_SIMO, "ab4", NULL),
-	_OMAP3_BALLENTRY(MCSPI1_SOMI, "aa4", NULL),
-	_OMAP3_BALLENTRY(MCSPI2_CLK, "aa3", NULL),
-	_OMAP3_BALLENTRY(MCSPI2_CS0, "y4", NULL),
-	_OMAP3_BALLENTRY(MCSPI2_CS1, "v3", NULL),
-	_OMAP3_BALLENTRY(MCSPI2_SIMO, "y2", NULL),
-	_OMAP3_BALLENTRY(MCSPI2_SOMI, "y3", NULL),
-	_OMAP3_BALLENTRY(SDMMC1_CLK, "n28", NULL),
-	_OMAP3_BALLENTRY(SDMMC1_CMD, "m27", NULL),
-	_OMAP3_BALLENTRY(SDMMC1_DAT0, "n27", NULL),
-	_OMAP3_BALLENTRY(SDMMC1_DAT1, "n26", NULL),
-	_OMAP3_BALLENTRY(SDMMC1_DAT2, "n25", NULL),
-	_OMAP3_BALLENTRY(SDMMC1_DAT3, "p28", NULL),
-	_OMAP3_BALLENTRY(SDMMC2_CLK, "ae2", NULL),
-	_OMAP3_BALLENTRY(SDMMC2_CMD, "ag5", NULL),
-	_OMAP3_BALLENTRY(SDMMC2_DAT0, "ah5", NULL),
-	_OMAP3_BALLENTRY(SDMMC2_DAT1, "ah4", NULL),
-	_OMAP3_BALLENTRY(SDMMC2_DAT2, "ag4", NULL),
-	_OMAP3_BALLENTRY(SDMMC2_DAT3, "af4", NULL),
-	_OMAP3_BALLENTRY(SDMMC2_DAT4, "ae4", NULL),
-	_OMAP3_BALLENTRY(SDMMC2_DAT5, "ah3", NULL),
-	_OMAP3_BALLENTRY(SDMMC2_DAT6, "af3", NULL),
-	_OMAP3_BALLENTRY(SDMMC2_DAT7, "ae3", NULL),
-	_OMAP3_BALLENTRY(SDRC_CKE0, "h16", "j22"),
-	_OMAP3_BALLENTRY(SDRC_CKE1, "h17", "j23"),
-	_OMAP3_BALLENTRY(SIM_CLK, "p26", NULL),
-	_OMAP3_BALLENTRY(SIM_IO, "p27", NULL),
-	_OMAP3_BALLENTRY(SIM_PWRCTRL, "r27", NULL),
-	_OMAP3_BALLENTRY(SIM_RST, "r25", NULL),
-	_OMAP3_BALLENTRY(SYS_BOOT0, "ah26", NULL),
-	_OMAP3_BALLENTRY(SYS_BOOT1, "ag26", NULL),
-	_OMAP3_BALLENTRY(SYS_BOOT2, "ae14", NULL),
-	_OMAP3_BALLENTRY(SYS_BOOT3, "af18", NULL),
-	_OMAP3_BALLENTRY(SYS_BOOT4, "af19", NULL),
-	_OMAP3_BALLENTRY(SYS_BOOT5, "ae21", NULL),
-	_OMAP3_BALLENTRY(SYS_BOOT6, "af21", NULL),
-	_OMAP3_BALLENTRY(SYS_CLKOUT1, "ag25", NULL),
-	_OMAP3_BALLENTRY(SYS_CLKOUT2, "ae22", NULL),
-	_OMAP3_BALLENTRY(SYS_CLKREQ, "af25", NULL),
-	_OMAP3_BALLENTRY(SYS_NIRQ, "af26", NULL),
-	_OMAP3_BALLENTRY(SYS_NRESWARM, "af24", NULL),
-	_OMAP3_BALLENTRY(SYS_OFF_MODE, "af22", NULL),
-	_OMAP3_BALLENTRY(UART1_CTS, "w8", NULL),
-	_OMAP3_BALLENTRY(UART1_RTS, "aa9", NULL),
-	_OMAP3_BALLENTRY(UART1_RX, "y8", NULL),
-	_OMAP3_BALLENTRY(UART1_TX, "aa8", NULL),
-	_OMAP3_BALLENTRY(UART2_CTS, "ab26", NULL),
-	_OMAP3_BALLENTRY(UART2_RTS, "ab25", NULL),
-	_OMAP3_BALLENTRY(UART2_RX, "ad25", NULL),
-	_OMAP3_BALLENTRY(UART2_TX, "aa25", NULL),
-	_OMAP3_BALLENTRY(UART3_CTS_RCTX, "h18", NULL),
-	_OMAP3_BALLENTRY(UART3_RTS_SD, "h19", NULL),
-	_OMAP3_BALLENTRY(UART3_RX_IRRX, "h20", NULL),
-	_OMAP3_BALLENTRY(UART3_TX_IRTX, "h21", NULL),
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#else
-#define omap36xx_cbp_ball	 NULL
-#endif
-
-int __init omap3_mux_init(struct omap_board_mux *board_subset, int flags)
-{
-	struct omap_mux *package_subset;
-	struct omap_ball *package_balls;
-
-	switch (flags & OMAP_PACKAGE_MASK) {
-	case OMAP_PACKAGE_CBC:
-		package_subset = omap3_cbc_subset;
-		package_balls = omap3_cbc_ball;
-		break;
-	case OMAP_PACKAGE_CBB:
-		package_subset = omap3_cbb_subset;
-		package_balls = omap3_cbb_ball;
-		break;
-	case OMAP_PACKAGE_CUS:
-		package_subset = omap3_cus_subset;
-		package_balls = omap3_cus_ball;
-		break;
-	case OMAP_PACKAGE_CBP:
-		package_subset = omap36xx_cbp_subset;
-		package_balls = omap36xx_cbp_ball;
-		break;
-	default:
-		pr_err("%s Unknown omap package, mux disabled\n", __func__);
-		return -EINVAL;
-	}
-
-	return omap_mux_init("core", OMAP_MUX_GPIO_IN_MODE4,
-			     OMAP3_CONTROL_PADCONF_MUX_PBASE,
-			     OMAP3_CONTROL_PADCONF_MUX_SIZE,
-			     omap3_muxmodes, package_subset, board_subset,
-			     package_balls);
-}

arch/arm/mach-omap2/mux34xx.h

@@ -1,402 +0,0 @@
-/*
- * Copyright (C) 2009 Nokia
- * Copyright (C) 2009 Texas Instruments
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#define OMAP3_CONTROL_PADCONF_MUX_PBASE				0x48002030LU
-
-#define OMAP3_MUX(mode0, mux_value)					\
-{									\
-	.reg_offset	= (OMAP3_CONTROL_PADCONF_##mode0##_OFFSET),	\
-	.value		= (mux_value),					\
-}
-
-/*
- * OMAP3 CONTROL_PADCONF* register offsets for pin-muxing
- *
- * Extracted from the TRM.  Add 0x48002030 to these values to get the
- * absolute addresses.  The name in the macro is the mode-0 name of
- * the pin.  NOTE: These registers are 16-bits wide.
- *
- * Note that 34XX TRM uses MMC instead of SDMMC and SAD2D instead
- * of CHASSIS for some registers. For the defines, we follow the
- * 36XX naming, and use SDMMC and CHASSIS.
- */
-#define OMAP3_CONTROL_PADCONF_SDRC_D0_OFFSET			0x000
-#define OMAP3_CONTROL_PADCONF_SDRC_D1_OFFSET			0x002
-#define OMAP3_CONTROL_PADCONF_SDRC_D2_OFFSET			0x004
-#define OMAP3_CONTROL_PADCONF_SDRC_D3_OFFSET			0x006
-#define OMAP3_CONTROL_PADCONF_SDRC_D4_OFFSET			0x008
-#define OMAP3_CONTROL_PADCONF_SDRC_D5_OFFSET			0x00a
-#define OMAP3_CONTROL_PADCONF_SDRC_D6_OFFSET			0x00c
-#define OMAP3_CONTROL_PADCONF_SDRC_D7_OFFSET			0x00e
-#define OMAP3_CONTROL_PADCONF_SDRC_D8_OFFSET			0x010
-#define OMAP3_CONTROL_PADCONF_SDRC_D9_OFFSET			0x012
-#define OMAP3_CONTROL_PADCONF_SDRC_D10_OFFSET			0x014
-#define OMAP3_CONTROL_PADCONF_SDRC_D11_OFFSET			0x016
-#define OMAP3_CONTROL_PADCONF_SDRC_D12_OFFSET			0x018
-#define OMAP3_CONTROL_PADCONF_SDRC_D13_OFFSET			0x01a
-#define OMAP3_CONTROL_PADCONF_SDRC_D14_OFFSET			0x01c
-#define OMAP3_CONTROL_PADCONF_SDRC_D15_OFFSET			0x01e
-#define OMAP3_CONTROL_PADCONF_SDRC_D16_OFFSET			0x020
-#define OMAP3_CONTROL_PADCONF_SDRC_D17_OFFSET			0x022
-#define OMAP3_CONTROL_PADCONF_SDRC_D18_OFFSET			0x024
-#define OMAP3_CONTROL_PADCONF_SDRC_D19_OFFSET			0x026
-#define OMAP3_CONTROL_PADCONF_SDRC_D20_OFFSET			0x028
-#define OMAP3_CONTROL_PADCONF_SDRC_D21_OFFSET			0x02a
-#define OMAP3_CONTROL_PADCONF_SDRC_D22_OFFSET			0x02c
-#define OMAP3_CONTROL_PADCONF_SDRC_D23_OFFSET			0x02e
-#define OMAP3_CONTROL_PADCONF_SDRC_D24_OFFSET			0x030
-#define OMAP3_CONTROL_PADCONF_SDRC_D25_OFFSET			0x032
-#define OMAP3_CONTROL_PADCONF_SDRC_D26_OFFSET			0x034
-#define OMAP3_CONTROL_PADCONF_SDRC_D27_OFFSET			0x036
-#define OMAP3_CONTROL_PADCONF_SDRC_D28_OFFSET			0x038
-#define OMAP3_CONTROL_PADCONF_SDRC_D29_OFFSET			0x03a
-#define OMAP3_CONTROL_PADCONF_SDRC_D30_OFFSET			0x03c
-#define OMAP3_CONTROL_PADCONF_SDRC_D31_OFFSET			0x03e
-#define OMAP3_CONTROL_PADCONF_SDRC_CLK_OFFSET			0x040
-#define OMAP3_CONTROL_PADCONF_SDRC_DQS0_OFFSET			0x042
-#define OMAP3_CONTROL_PADCONF_SDRC_DQS1_OFFSET			0x044
-#define OMAP3_CONTROL_PADCONF_SDRC_DQS2_OFFSET			0x046
-#define OMAP3_CONTROL_PADCONF_SDRC_DQS3_OFFSET			0x048
-#define OMAP3_CONTROL_PADCONF_GPMC_A1_OFFSET			0x04a
-#define OMAP3_CONTROL_PADCONF_GPMC_A2_OFFSET			0x04c
-#define OMAP3_CONTROL_PADCONF_GPMC_A3_OFFSET			0x04e
-#define OMAP3_CONTROL_PADCONF_GPMC_A4_OFFSET			0x050
-#define OMAP3_CONTROL_PADCONF_GPMC_A5_OFFSET			0x052
-#define OMAP3_CONTROL_PADCONF_GPMC_A6_OFFSET			0x054
-#define OMAP3_CONTROL_PADCONF_GPMC_A7_OFFSET			0x056
-#define OMAP3_CONTROL_PADCONF_GPMC_A8_OFFSET			0x058
-#define OMAP3_CONTROL_PADCONF_GPMC_A9_OFFSET			0x05a
-#define OMAP3_CONTROL_PADCONF_GPMC_A10_OFFSET			0x05c
-#define OMAP3_CONTROL_PADCONF_GPMC_D0_OFFSET			0x05e
-#define OMAP3_CONTROL_PADCONF_GPMC_D1_OFFSET			0x060
-#define OMAP3_CONTROL_PADCONF_GPMC_D2_OFFSET			0x062
-#define OMAP3_CONTROL_PADCONF_GPMC_D3_OFFSET			0x064
-#define OMAP3_CONTROL_PADCONF_GPMC_D4_OFFSET			0x066
-#define OMAP3_CONTROL_PADCONF_GPMC_D5_OFFSET			0x068
-#define OMAP3_CONTROL_PADCONF_GPMC_D6_OFFSET			0x06a
-#define OMAP3_CONTROL_PADCONF_GPMC_D7_OFFSET			0x06c
-#define OMAP3_CONTROL_PADCONF_GPMC_D8_OFFSET			0x06e
-#define OMAP3_CONTROL_PADCONF_GPMC_D9_OFFSET			0x070
-#define OMAP3_CONTROL_PADCONF_GPMC_D10_OFFSET			0x072
-#define OMAP3_CONTROL_PADCONF_GPMC_D11_OFFSET			0x074
-#define OMAP3_CONTROL_PADCONF_GPMC_D12_OFFSET			0x076
-#define OMAP3_CONTROL_PADCONF_GPMC_D13_OFFSET			0x078
-#define OMAP3_CONTROL_PADCONF_GPMC_D14_OFFSET			0x07a
-#define OMAP3_CONTROL_PADCONF_GPMC_D15_OFFSET			0x07c
-#define OMAP3_CONTROL_PADCONF_GPMC_NCS0_OFFSET			0x07e
-#define OMAP3_CONTROL_PADCONF_GPMC_NCS1_OFFSET			0x080
-#define OMAP3_CONTROL_PADCONF_GPMC_NCS2_OFFSET			0x082
-#define OMAP3_CONTROL_PADCONF_GPMC_NCS3_OFFSET			0x084
-#define OMAP3_CONTROL_PADCONF_GPMC_NCS4_OFFSET			0x086
-#define OMAP3_CONTROL_PADCONF_GPMC_NCS5_OFFSET			0x088
-#define OMAP3_CONTROL_PADCONF_GPMC_NCS6_OFFSET			0x08a
-#define OMAP3_CONTROL_PADCONF_GPMC_NCS7_OFFSET			0x08c
-#define OMAP3_CONTROL_PADCONF_GPMC_CLK_OFFSET			0x08e
-#define OMAP3_CONTROL_PADCONF_GPMC_NADV_ALE_OFFSET		0x090
-#define OMAP3_CONTROL_PADCONF_GPMC_NOE_OFFSET			0x092
-#define OMAP3_CONTROL_PADCONF_GPMC_NWE_OFFSET			0x094
-#define OMAP3_CONTROL_PADCONF_GPMC_NBE0_CLE_OFFSET		0x096
-#define OMAP3_CONTROL_PADCONF_GPMC_NBE1_OFFSET			0x098
-#define OMAP3_CONTROL_PADCONF_GPMC_NWP_OFFSET			0x09a
-#define OMAP3_CONTROL_PADCONF_GPMC_WAIT0_OFFSET			0x09c
-#define OMAP3_CONTROL_PADCONF_GPMC_WAIT1_OFFSET			0x09e
-#define OMAP3_CONTROL_PADCONF_GPMC_WAIT2_OFFSET			0x0a0
-#define OMAP3_CONTROL_PADCONF_GPMC_WAIT3_OFFSET			0x0a2
-#define OMAP3_CONTROL_PADCONF_DSS_PCLK_OFFSET			0x0a4
-#define OMAP3_CONTROL_PADCONF_DSS_HSYNC_OFFSET			0x0a6
-#define OMAP3_CONTROL_PADCONF_DSS_VSYNC_OFFSET			0x0a8
-#define OMAP3_CONTROL_PADCONF_DSS_ACBIAS_OFFSET			0x0aa
-#define OMAP3_CONTROL_PADCONF_DSS_DATA0_OFFSET			0x0ac
-#define OMAP3_CONTROL_PADCONF_DSS_DATA1_OFFSET			0x0ae
-#define OMAP3_CONTROL_PADCONF_DSS_DATA2_OFFSET			0x0b0
-#define OMAP3_CONTROL_PADCONF_DSS_DATA3_OFFSET			0x0b2
-#define OMAP3_CONTROL_PADCONF_DSS_DATA4_OFFSET			0x0b4
-#define OMAP3_CONTROL_PADCONF_DSS_DATA5_OFFSET			0x0b6
-#define OMAP3_CONTROL_PADCONF_DSS_DATA6_OFFSET			0x0b8
-#define OMAP3_CONTROL_PADCONF_DSS_DATA7_OFFSET			0x0ba
-#define OMAP3_CONTROL_PADCONF_DSS_DATA8_OFFSET			0x0bc
-#define OMAP3_CONTROL_PADCONF_DSS_DATA9_OFFSET			0x0be
-#define OMAP3_CONTROL_PADCONF_DSS_DATA10_OFFSET			0x0c0
-#define OMAP3_CONTROL_PADCONF_DSS_DATA11_OFFSET			0x0c2
-#define OMAP3_CONTROL_PADCONF_DSS_DATA12_OFFSET			0x0c4
-#define OMAP3_CONTROL_PADCONF_DSS_DATA13_OFFSET			0x0c6
-#define OMAP3_CONTROL_PADCONF_DSS_DATA14_OFFSET			0x0c8
-#define OMAP3_CONTROL_PADCONF_DSS_DATA15_OFFSET			0x0ca
-#define OMAP3_CONTROL_PADCONF_DSS_DATA16_OFFSET			0x0cc
-#define OMAP3_CONTROL_PADCONF_DSS_DATA17_OFFSET			0x0ce
-#define OMAP3_CONTROL_PADCONF_DSS_DATA18_OFFSET			0x0d0
-#define OMAP3_CONTROL_PADCONF_DSS_DATA19_OFFSET			0x0d2
-#define OMAP3_CONTROL_PADCONF_DSS_DATA20_OFFSET			0x0d4
-#define OMAP3_CONTROL_PADCONF_DSS_DATA21_OFFSET			0x0d6
-#define OMAP3_CONTROL_PADCONF_DSS_DATA22_OFFSET			0x0d8
-#define OMAP3_CONTROL_PADCONF_DSS_DATA23_OFFSET			0x0da
-#define OMAP3_CONTROL_PADCONF_CAM_HS_OFFSET			0x0dc
-#define OMAP3_CONTROL_PADCONF_CAM_VS_OFFSET			0x0de
-#define OMAP3_CONTROL_PADCONF_CAM_XCLKA_OFFSET			0x0e0
-#define OMAP3_CONTROL_PADCONF_CAM_PCLK_OFFSET			0x0e2
-#define OMAP3_CONTROL_PADCONF_CAM_FLD_OFFSET			0x0e4
-#define OMAP3_CONTROL_PADCONF_CAM_D0_OFFSET			0x0e6
-#define OMAP3_CONTROL_PADCONF_CAM_D1_OFFSET			0x0e8
-#define OMAP3_CONTROL_PADCONF_CAM_D2_OFFSET			0x0ea
-#define OMAP3_CONTROL_PADCONF_CAM_D3_OFFSET			0x0ec
-#define OMAP3_CONTROL_PADCONF_CAM_D4_OFFSET			0x0ee
-#define OMAP3_CONTROL_PADCONF_CAM_D5_OFFSET			0x0f0
-#define OMAP3_CONTROL_PADCONF_CAM_D6_OFFSET			0x0f2
-#define OMAP3_CONTROL_PADCONF_CAM_D7_OFFSET			0x0f4
-#define OMAP3_CONTROL_PADCONF_CAM_D8_OFFSET			0x0f6
-#define OMAP3_CONTROL_PADCONF_CAM_D9_OFFSET			0x0f8
-#define OMAP3_CONTROL_PADCONF_CAM_D10_OFFSET			0x0fa
-#define OMAP3_CONTROL_PADCONF_CAM_D11_OFFSET			0x0fc
-#define OMAP3_CONTROL_PADCONF_CAM_XCLKB_OFFSET			0x0fe
-#define OMAP3_CONTROL_PADCONF_CAM_WEN_OFFSET			0x100
-#define OMAP3_CONTROL_PADCONF_CAM_STROBE_OFFSET			0x102
-#define OMAP3_CONTROL_PADCONF_CSI2_DX0_OFFSET			0x104
-#define OMAP3_CONTROL_PADCONF_CSI2_DY0_OFFSET			0x106
-#define OMAP3_CONTROL_PADCONF_CSI2_DX1_OFFSET			0x108
-#define OMAP3_CONTROL_PADCONF_CSI2_DY1_OFFSET			0x10a
-#define OMAP3_CONTROL_PADCONF_MCBSP2_FSX_OFFSET			0x10c
-#define OMAP3_CONTROL_PADCONF_MCBSP2_CLKX_OFFSET		0x10e
-#define OMAP3_CONTROL_PADCONF_MCBSP2_DR_OFFSET			0x110
-#define OMAP3_CONTROL_PADCONF_MCBSP2_DX_OFFSET			0x112
-#define OMAP3_CONTROL_PADCONF_SDMMC1_CLK_OFFSET			0x114
-#define OMAP3_CONTROL_PADCONF_SDMMC1_CMD_OFFSET			0x116
-#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT0_OFFSET		0x118
-#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT1_OFFSET		0x11a
-#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT2_OFFSET		0x11c
-#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT3_OFFSET		0x11e
-
-/* SDMMC1_DAT4 - DAT7 are SIM_IO SIM_CLK SIM_PWRCTRL and SIM_RST on 36xx */
-#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT4_OFFSET		0x120
-#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT5_OFFSET		0x122
-#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT6_OFFSET		0x124
-#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT7_OFFSET		0x126
-
-#define OMAP3_CONTROL_PADCONF_SDMMC2_CLK_OFFSET			0x128
-#define OMAP3_CONTROL_PADCONF_SDMMC2_CMD_OFFSET			0x12a
-#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT0_OFFSET		0x12c
-#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT1_OFFSET		0x12e
-#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT2_OFFSET		0x130
-#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT3_OFFSET		0x132
-#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT4_OFFSET		0x134
-#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT5_OFFSET		0x136
-#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT6_OFFSET		0x138
-#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT7_OFFSET		0x13a
-#define OMAP3_CONTROL_PADCONF_MCBSP3_DX_OFFSET			0x13c
-#define OMAP3_CONTROL_PADCONF_MCBSP3_DR_OFFSET			0x13e
-#define OMAP3_CONTROL_PADCONF_MCBSP3_CLKX_OFFSET		0x140
-#define OMAP3_CONTROL_PADCONF_MCBSP3_FSX_OFFSET			0x142
-#define OMAP3_CONTROL_PADCONF_UART2_CTS_OFFSET			0x144
-#define OMAP3_CONTROL_PADCONF_UART2_RTS_OFFSET			0x146
-#define OMAP3_CONTROL_PADCONF_UART2_TX_OFFSET			0x148
-#define OMAP3_CONTROL_PADCONF_UART2_RX_OFFSET			0x14a
-#define OMAP3_CONTROL_PADCONF_UART1_TX_OFFSET			0x14c
-#define OMAP3_CONTROL_PADCONF_UART1_RTS_OFFSET			0x14e
-#define OMAP3_CONTROL_PADCONF_UART1_CTS_OFFSET			0x150
-#define OMAP3_CONTROL_PADCONF_UART1_RX_OFFSET			0x152
-#define OMAP3_CONTROL_PADCONF_MCBSP4_CLKX_OFFSET		0x154
-#define OMAP3_CONTROL_PADCONF_MCBSP4_DR_OFFSET			0x156
-#define OMAP3_CONTROL_PADCONF_MCBSP4_DX_OFFSET			0x158
-#define OMAP3_CONTROL_PADCONF_MCBSP4_FSX_OFFSET			0x15a
-#define OMAP3_CONTROL_PADCONF_MCBSP1_CLKR_OFFSET		0x15c
-#define OMAP3_CONTROL_PADCONF_MCBSP1_FSR_OFFSET			0x15e
-#define OMAP3_CONTROL_PADCONF_MCBSP1_DX_OFFSET			0x160
-#define OMAP3_CONTROL_PADCONF_MCBSP1_DR_OFFSET			0x162
-#define OMAP3_CONTROL_PADCONF_MCBSP_CLKS_OFFSET			0x164
-#define OMAP3_CONTROL_PADCONF_MCBSP1_FSX_OFFSET			0x166
-#define OMAP3_CONTROL_PADCONF_MCBSP1_CLKX_OFFSET		0x168
-#define OMAP3_CONTROL_PADCONF_UART3_CTS_RCTX_OFFSET		0x16a
-#define OMAP3_CONTROL_PADCONF_UART3_RTS_SD_OFFSET		0x16c
-#define OMAP3_CONTROL_PADCONF_UART3_RX_IRRX_OFFSET		0x16e
-#define OMAP3_CONTROL_PADCONF_UART3_TX_IRTX_OFFSET		0x170
-#define OMAP3_CONTROL_PADCONF_HSUSB0_CLK_OFFSET			0x172
-#define OMAP3_CONTROL_PADCONF_HSUSB0_STP_OFFSET			0x174
-#define OMAP3_CONTROL_PADCONF_HSUSB0_DIR_OFFSET			0x176
-#define OMAP3_CONTROL_PADCONF_HSUSB0_NXT_OFFSET			0x178
-#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA0_OFFSET		0x17a
-#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA1_OFFSET		0x17c
-#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA2_OFFSET		0x17e
-#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA3_OFFSET		0x180
-#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA4_OFFSET		0x182
-#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA5_OFFSET		0x184
-#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA6_OFFSET		0x186
-#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA7_OFFSET		0x188
-#define OMAP3_CONTROL_PADCONF_I2C1_SCL_OFFSET			0x18a
-#define OMAP3_CONTROL_PADCONF_I2C1_SDA_OFFSET			0x18c
-#define OMAP3_CONTROL_PADCONF_I2C2_SCL_OFFSET			0x18e
-#define OMAP3_CONTROL_PADCONF_I2C2_SDA_OFFSET			0x190
-#define OMAP3_CONTROL_PADCONF_I2C3_SCL_OFFSET			0x192
-#define OMAP3_CONTROL_PADCONF_I2C3_SDA_OFFSET			0x194
-#define OMAP3_CONTROL_PADCONF_HDQ_SIO_OFFSET			0x196
-#define OMAP3_CONTROL_PADCONF_MCSPI1_CLK_OFFSET			0x198
-#define OMAP3_CONTROL_PADCONF_MCSPI1_SIMO_OFFSET		0x19a
-#define OMAP3_CONTROL_PADCONF_MCSPI1_SOMI_OFFSET		0x19c
-#define OMAP3_CONTROL_PADCONF_MCSPI1_CS0_OFFSET			0x19e
-#define OMAP3_CONTROL_PADCONF_MCSPI1_CS1_OFFSET			0x1a0
-#define OMAP3_CONTROL_PADCONF_MCSPI1_CS2_OFFSET			0x1a2
-#define OMAP3_CONTROL_PADCONF_MCSPI1_CS3_OFFSET			0x1a4
-#define OMAP3_CONTROL_PADCONF_MCSPI2_CLK_OFFSET			0x1a6
-#define OMAP3_CONTROL_PADCONF_MCSPI2_SIMO_OFFSET		0x1a8
-#define OMAP3_CONTROL_PADCONF_MCSPI2_SOMI_OFFSET		0x1aa
-#define OMAP3_CONTROL_PADCONF_MCSPI2_CS0_OFFSET			0x1ac
-#define OMAP3_CONTROL_PADCONF_MCSPI2_CS1_OFFSET			0x1ae
-#define OMAP3_CONTROL_PADCONF_SYS_NIRQ_OFFSET			0x1b0
-#define OMAP3_CONTROL_PADCONF_SYS_CLKOUT2_OFFSET		0x1b2
-#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD0_OFFSET		0x1b4
-#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD1_OFFSET		0x1b6
-#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD2_OFFSET		0x1b8
-#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD3_OFFSET		0x1ba
-#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD4_OFFSET		0x1bc
-#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD5_OFFSET		0x1be
-#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD6_OFFSET		0x1c0
-#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD7_OFFSET		0x1c2
-#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD8_OFFSET		0x1c4
-#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD9_OFFSET		0x1c6
-#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD10_OFFSET		0x1c8
-#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD11_OFFSET		0x1ca
-#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD12_OFFSET		0x1cc
-#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD13_OFFSET		0x1ce
-#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD14_OFFSET		0x1d0
-#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD15_OFFSET		0x1d2
-#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD16_OFFSET		0x1d4
-#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD17_OFFSET		0x1d6
-#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD18_OFFSET		0x1d8
-#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD19_OFFSET		0x1da
-#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD20_OFFSET		0x1dc
-#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD21_OFFSET		0x1de
-#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD22_OFFSET		0x1e0
-#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD23_OFFSET		0x1e2
-#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD24_OFFSET		0x1e4
-#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD25_OFFSET		0x1e6
-#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD26_OFFSET		0x1e8
-#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD27_OFFSET		0x1ea
-#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD28_OFFSET		0x1ec
-#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD29_OFFSET		0x1ee
-#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD30_OFFSET		0x1f0
-#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD31_OFFSET		0x1f2
-#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD32_OFFSET		0x1f4
-#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD33_OFFSET		0x1f6
-#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD34_OFFSET		0x1f8
-#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD35_OFFSET		0x1fa
-#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD36_OFFSET		0x1fc
-
-/* Note that 34xx TRM has SAD2D instead of CHASSIS for these */
-#define OMAP3_CONTROL_PADCONF_CHASSIS_CLK26MI_OFFSET		0x1fe
-#define OMAP3_CONTROL_PADCONF_CHASSIS_NRESPWRON_OFFSET		0x200
-#define OMAP3_CONTROL_PADCONF_CHASSIS_NRESWARW_OFFSET		0x202
-#define OMAP3_CONTROL_PADCONF_CHASSIS_NIRQ_OFFSET		0x204
-#define OMAP3_CONTROL_PADCONF_CHASSIS_FIQ_OFFSET		0x206
-#define OMAP3_CONTROL_PADCONF_CHASSIS_ARMIRQ_OFFSET		0x208
-#define OMAP3_CONTROL_PADCONF_CHASSIS_IVAIRQ_OFFSET		0x20a
-#define OMAP3_CONTROL_PADCONF_CHASSIS_DMAREQ0_OFFSET		0x20c
-#define OMAP3_CONTROL_PADCONF_CHASSIS_DMAREQ1_OFFSET		0x20e
-#define OMAP3_CONTROL_PADCONF_CHASSIS_DMAREQ2_OFFSET		0x210
-#define OMAP3_CONTROL_PADCONF_CHASSIS_DMAREQ3_OFFSET		0x212
-#define OMAP3_CONTROL_PADCONF_CHASSIS_NTRST_OFFSET		0x214
-#define OMAP3_CONTROL_PADCONF_CHASSIS_TDI_OFFSET		0x216
-#define OMAP3_CONTROL_PADCONF_CHASSIS_TDO_OFFSET		0x218
-#define OMAP3_CONTROL_PADCONF_CHASSIS_TMS_OFFSET		0x21a
-#define OMAP3_CONTROL_PADCONF_CHASSIS_TCK_OFFSET		0x21c
-#define OMAP3_CONTROL_PADCONF_CHASSIS_RTCK_OFFSET		0x21e
-#define OMAP3_CONTROL_PADCONF_CHASSIS_MSTDBY_OFFSET		0x220
-#define OMAP3_CONTROL_PADCONF_CHASSIS_IDLEREQ_OFFSET		0x222
-#define OMAP3_CONTROL_PADCONF_CHASSIS_IDLEACK_OFFSET		0x224
-
-#define OMAP3_CONTROL_PADCONF_SAD2D_MWRITE_OFFSET		0x226
-#define OMAP3_CONTROL_PADCONF_SAD2D_SWRITE_OFFSET		0x228
-#define OMAP3_CONTROL_PADCONF_SAD2D_MREAD_OFFSET		0x22a
-#define OMAP3_CONTROL_PADCONF_SAD2D_SREAD_OFFSET		0x22c
-#define OMAP3_CONTROL_PADCONF_SAD2D_MBUSFLAG_OFFSET		0x22e
-#define OMAP3_CONTROL_PADCONF_SAD2D_SBUSFLAG_OFFSET		0x230
-#define OMAP3_CONTROL_PADCONF_SDRC_CKE0_OFFSET			0x232
-#define OMAP3_CONTROL_PADCONF_SDRC_CKE1_OFFSET			0x234
-
-/* 36xx only */
-#define OMAP3_CONTROL_PADCONF_GPMC_A11_OFFSET			0x236
-#define OMAP3_CONTROL_PADCONF_SDRC_BA0_OFFSET			0x570
-#define OMAP3_CONTROL_PADCONF_SDRC_BA1_OFFSET			0x572
-#define OMAP3_CONTROL_PADCONF_SDRC_A0_OFFSET			0x574
-#define OMAP3_CONTROL_PADCONF_SDRC_A1_OFFSET			0x576
-#define OMAP3_CONTROL_PADCONF_SDRC_A2_OFFSET			0x578
-#define OMAP3_CONTROL_PADCONF_SDRC_A3_OFFSET			0x57a
-#define OMAP3_CONTROL_PADCONF_SDRC_A4_OFFSET			0x57c
-#define OMAP3_CONTROL_PADCONF_SDRC_A5_OFFSET			0x57e
-#define OMAP3_CONTROL_PADCONF_SDRC_A6_OFFSET			0x580
-#define OMAP3_CONTROL_PADCONF_SDRC_A7_OFFSET			0x582
-#define OMAP3_CONTROL_PADCONF_SDRC_A8_OFFSET			0x584
-#define OMAP3_CONTROL_PADCONF_SDRC_A9_OFFSET			0x586
-#define OMAP3_CONTROL_PADCONF_SDRC_A10_OFFSET			0x588
-#define OMAP3_CONTROL_PADCONF_SDRC_A11_OFFSET			0x58a
-#define OMAP3_CONTROL_PADCONF_SDRC_A12_OFFSET			0x58c
-#define OMAP3_CONTROL_PADCONF_SDRC_A13_OFFSET			0x58e
-#define OMAP3_CONTROL_PADCONF_SDRC_A14_OFFSET			0x590
-#define OMAP3_CONTROL_PADCONF_SDRC_NCS0_OFFSET			0x592
-#define OMAP3_CONTROL_PADCONF_SDRC_NCS1_OFFSET			0x594
-#define OMAP3_CONTROL_PADCONF_SDRC_NCLK_OFFSET			0x596
-#define OMAP3_CONTROL_PADCONF_SDRC_NRAS_OFFSET			0x598
-#define OMAP3_CONTROL_PADCONF_SDRC_NCAS_OFFSET			0x59a
-#define OMAP3_CONTROL_PADCONF_SDRC_NWE_OFFSET			0x59c
-#define OMAP3_CONTROL_PADCONF_SDRC_DM0_OFFSET			0x59e
-#define OMAP3_CONTROL_PADCONF_SDRC_DM1_OFFSET			0x5a0
-#define OMAP3_CONTROL_PADCONF_SDRC_DM2_OFFSET			0x5a2
-#define OMAP3_CONTROL_PADCONF_SDRC_DM3_OFFSET			0x5a4
-
-/* 36xx only, these are SDMMC1_DAT4 - DAT7 on 34xx */
-#define OMAP3_CONTROL_PADCONF_SIM_IO_OFFSET			0x120
-#define OMAP3_CONTROL_PADCONF_SIM_CLK_OFFSET			0x122
-#define OMAP3_CONTROL_PADCONF_SIM_PWRCTRL_OFFSET		0x124
-#define OMAP3_CONTROL_PADCONF_SIM_RST_OFFSET			0x126
-
-#define OMAP3_CONTROL_PADCONF_ETK_CLK_OFFSET			0x5a8
-#define OMAP3_CONTROL_PADCONF_ETK_CTL_OFFSET			0x5aa
-#define OMAP3_CONTROL_PADCONF_ETK_D0_OFFSET			0x5ac
-#define OMAP3_CONTROL_PADCONF_ETK_D1_OFFSET			0x5ae
-#define OMAP3_CONTROL_PADCONF_ETK_D2_OFFSET			0x5b0
-#define OMAP3_CONTROL_PADCONF_ETK_D3_OFFSET			0x5b2
-#define OMAP3_CONTROL_PADCONF_ETK_D4_OFFSET			0x5b4
-#define OMAP3_CONTROL_PADCONF_ETK_D5_OFFSET			0x5b6
-#define OMAP3_CONTROL_PADCONF_ETK_D6_OFFSET			0x5b8
-#define OMAP3_CONTROL_PADCONF_ETK_D7_OFFSET			0x5ba
-#define OMAP3_CONTROL_PADCONF_ETK_D8_OFFSET			0x5bc
-#define OMAP3_CONTROL_PADCONF_ETK_D9_OFFSET			0x5be
-#define OMAP3_CONTROL_PADCONF_ETK_D10_OFFSET			0x5c0
-#define OMAP3_CONTROL_PADCONF_ETK_D11_OFFSET			0x5c2
-#define OMAP3_CONTROL_PADCONF_ETK_D12_OFFSET			0x5c4
-#define OMAP3_CONTROL_PADCONF_ETK_D13_OFFSET			0x5c6
-#define OMAP3_CONTROL_PADCONF_ETK_D14_OFFSET			0x5c8
-#define OMAP3_CONTROL_PADCONF_ETK_D15_OFFSET			0x5ca
-#define OMAP3_CONTROL_PADCONF_I2C4_SCL_OFFSET			0x9d0
-#define OMAP3_CONTROL_PADCONF_I2C4_SDA_OFFSET			0x9d2
-#define OMAP3_CONTROL_PADCONF_SYS_32K_OFFSET			0x9d4
-#define OMAP3_CONTROL_PADCONF_SYS_CLKREQ_OFFSET			0x9d6
-#define OMAP3_CONTROL_PADCONF_SYS_NRESWARM_OFFSET		0x9d8
-#define OMAP3_CONTROL_PADCONF_SYS_BOOT0_OFFSET			0x9da
-#define OMAP3_CONTROL_PADCONF_SYS_BOOT1_OFFSET			0x9dc
-#define OMAP3_CONTROL_PADCONF_SYS_BOOT2_OFFSET			0x9de
-#define OMAP3_CONTROL_PADCONF_SYS_BOOT3_OFFSET			0x9e0
-#define OMAP3_CONTROL_PADCONF_SYS_BOOT4_OFFSET			0x9e2
-#define OMAP3_CONTROL_PADCONF_SYS_BOOT5_OFFSET			0x9e4
-#define OMAP3_CONTROL_PADCONF_SYS_BOOT6_OFFSET			0x9e6
-#define OMAP3_CONTROL_PADCONF_SYS_OFF_MODE_OFFSET		0x9e8
-#define OMAP3_CONTROL_PADCONF_SYS_CLKOUT1_OFFSET		0x9ea
-#define OMAP3_CONTROL_PADCONF_JTAG_NTRST_OFFSET			0x9ec
-#define OMAP3_CONTROL_PADCONF_JTAG_TCK_OFFSET			0x9ee
-#define OMAP3_CONTROL_PADCONF_JTAG_TMS_TMSC_OFFSET		0x9f0
-#define OMAP3_CONTROL_PADCONF_JTAG_TDI_OFFSET			0x9f2
-#define OMAP3_CONTROL_PADCONF_JTAG_EMU0_OFFSET			0x9f4
-#define OMAP3_CONTROL_PADCONF_JTAG_EMU1_OFFSET			0x9f6
-#define OMAP3_CONTROL_PADCONF_SAD2D_SWAKEUP_OFFSET		0xa1c
-#define OMAP3_CONTROL_PADCONF_JTAG_RTCK_OFFSET			0xa1e
-#define OMAP3_CONTROL_PADCONF_JTAG_TDO_OFFSET			0xa20
-#define OMAP3_CONTROL_PADCONF_GPIO_127				0xa24
-#define OMAP3_CONTROL_PADCONF_GPIO_126				0xa26
-#define OMAP3_CONTROL_PADCONF_GPIO_128				0xa28
-#define OMAP3_CONTROL_PADCONF_GPIO_129				0xa2a
-
-#define OMAP3_CONTROL_PADCONF_MUX_SIZE				\
-		(OMAP3_CONTROL_PADCONF_GPIO_129 + 0x2)

arch/arm/mach-omap2/omap-mpuss-lowpower.c

@@ -48,6 +48,7 @@
 #include <asm/smp_scu.h>
 #include <asm/pgalloc.h>
 #include <asm/suspend.h>
+#include <asm/virt.h>
 #include <asm/hardware/cache-l2x0.h>
 
 #include "soc.h"
@@ -244,10 +245,9 @@ int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state)
 		save_state = 1;
 		break;
 	case PWRDM_POWER_RET:
-		if (IS_PM44XX_ERRATUM(PM_OMAP4_CPU_OSWR_DISABLE)) {
+		if (IS_PM44XX_ERRATUM(PM_OMAP4_CPU_OSWR_DISABLE))
 			save_state = 0;
-			break;
-		}
+		break;
 	default:
 		/*
 		 * CPUx CSWR is invalid hardware state. Also CPUx OSWR
@@ -371,8 +371,12 @@ int __init omap4_mpuss_init(void)
 	pm_info = &per_cpu(omap4_pm_info, 0x0);
 	if (sar_base) {
 		pm_info->scu_sar_addr = sar_base + SCU_OFFSET0;
-		pm_info->wkup_sar_addr = sar_base +
-					CPU0_WAKEUP_NS_PA_ADDR_OFFSET;
+		if (cpu_is_omap44xx())
+			pm_info->wkup_sar_addr = sar_base +
+				CPU0_WAKEUP_NS_PA_ADDR_OFFSET;
+		else
+			pm_info->wkup_sar_addr = sar_base +
+				OMAP5_CPU0_WAKEUP_NS_PA_ADDR_OFFSET;
 		pm_info->l2x0_sar_addr = sar_base + L2X0_SAVE_OFFSET0;
 	}
 	pm_info->pwrdm = pwrdm_lookup("cpu0_pwrdm");
@@ -391,8 +395,12 @@ int __init omap4_mpuss_init(void)
 	pm_info = &per_cpu(omap4_pm_info, 0x1);
 	if (sar_base) {
 		pm_info->scu_sar_addr = sar_base + SCU_OFFSET1;
-		pm_info->wkup_sar_addr = sar_base +
-					CPU1_WAKEUP_NS_PA_ADDR_OFFSET;
+		if (cpu_is_omap44xx())
+			pm_info->wkup_sar_addr = sar_base +
+				CPU1_WAKEUP_NS_PA_ADDR_OFFSET;
+		else
+			pm_info->wkup_sar_addr = sar_base +
+				OMAP5_CPU1_WAKEUP_NS_PA_ADDR_OFFSET;
 		pm_info->l2x0_sar_addr = sar_base + L2X0_SAVE_OFFSET1;
 	}
 
@@ -453,15 +461,24 @@ void __init omap4_mpuss_early_init(void)
 {
 	unsigned long startup_pa;
 
-	if (!cpu_is_omap44xx())
+	if (!(cpu_is_omap44xx() || soc_is_omap54xx()))
 		return;
 
 	sar_base = omap4_get_sar_ram_base();
 
 	if (cpu_is_omap443x())
 		startup_pa = virt_to_phys(omap4_secondary_startup);
-	else
+	else if (cpu_is_omap446x())
 		startup_pa = virt_to_phys(omap4460_secondary_startup);
+	else if ((__boot_cpu_mode & MODE_MASK) == HYP_MODE)
+		startup_pa = virt_to_phys(omap5_secondary_hyp_startup);
+	else
+		startup_pa = virt_to_phys(omap5_secondary_startup);
 
-	writel_relaxed(startup_pa, sar_base + CPU1_WAKEUP_NS_PA_ADDR_OFFSET);
+	if (cpu_is_omap44xx())
+		writel_relaxed(startup_pa, sar_base +
+			       CPU1_WAKEUP_NS_PA_ADDR_OFFSET);
+	else
+		writel_relaxed(startup_pa, sar_base +
+			       OMAP5_CPU1_WAKEUP_NS_PA_ADDR_OFFSET);
 }

arch/arm/mach-omap2/omap4-sar-layout.h

@@ -31,6 +31,8 @@
 /* CPUx Wakeup Non-Secure Physical Address offsets in SAR_BANK3 */
 #define CPU0_WAKEUP_NS_PA_ADDR_OFFSET		0xa04
 #define CPU1_WAKEUP_NS_PA_ADDR_OFFSET		0xa08
+#define OMAP5_CPU0_WAKEUP_NS_PA_ADDR_OFFSET	0xe00
+#define OMAP5_CPU1_WAKEUP_NS_PA_ADDR_OFFSET	0xe04
 
 #define SAR_BACKUP_STATUS_OFFSET		(SAR_BANK3_OFFSET + 0x500)
 #define SAR_SECURE_RAM_SIZE_OFFSET		(SAR_BANK3_OFFSET + 0x504)

arch/arm/mach-omap2/omap_hwmod.c

@@ -160,7 +160,6 @@
 #include "prm44xx.h"
 #include "prm33xx.h"
 #include "prminst44xx.h"
-#include "mux.h"
 #include "pm.h"
 
 /* Name of the OMAP hwmod for the MPU */
@@ -217,9 +216,6 @@ static LIST_HEAD(omap_hwmod_list);
 /* mpu_oh: used to add/remove MPU initiator from sleepdep list */
 static struct omap_hwmod *mpu_oh;
 
-/* io_chain_lock: used to serialize reconfigurations of the I/O chain */
-static DEFINE_SPINLOCK(io_chain_lock);
-
 /*
  * linkspace: ptr to a buffer that struct omap_hwmod_link records are
  * allocated from - used to reduce the number of small memory
@@ -593,51 +589,6 @@ static int _set_module_autoidle(struct omap_hwmod *oh, u8 autoidle,
 	return 0;
 }
 
-/**
- * _set_idle_ioring_wakeup - enable/disable IO pad wakeup on hwmod idle for mux
- * @oh: struct omap_hwmod *
- * @set_wake: bool value indicating to set (true) or clear (false) wakeup enable
- *
- * Set or clear the I/O pad wakeup flag in the mux entries for the
- * hwmod @oh.  This function changes the @oh->mux->pads_dynamic array
- * in memory.  If the hwmod is currently idled, and the new idle
- * values don't match the previous ones, this function will also
- * update the SCM PADCTRL registers.  Otherwise, if the hwmod is not
- * currently idled, this function won't touch the hardware: the new
- * mux settings are written to the SCM PADCTRL registers when the
- * hwmod is idled.  No return value.
- */
-static void _set_idle_ioring_wakeup(struct omap_hwmod *oh, bool set_wake)
-{
-	struct omap_device_pad *pad;
-	bool change = false;
-	u16 prev_idle;
-	int j;
-
-	if (!oh->mux || !oh->mux->enabled)
-		return;
-
-	for (j = 0; j < oh->mux->nr_pads_dynamic; j++) {
-		pad = oh->mux->pads_dynamic[j];
-
-		if (!(pad->flags & OMAP_DEVICE_PAD_WAKEUP))
-			continue;
-
-		prev_idle = pad->idle;
-
-		if (set_wake)
-			pad->idle |= OMAP_WAKEUP_EN;
-		else
-			pad->idle &= ~OMAP_WAKEUP_EN;
-
-		if (prev_idle != pad->idle)
-			change = true;
-	}
-
-	if (change && oh->_state == _HWMOD_STATE_IDLE)
-		omap_hwmod_mux(oh->mux, _HWMOD_STATE_IDLE);
-}
-
 /**
  * _enable_wakeup: set OCP_SYSCONFIG.ENAWAKEUP bit in the hardware
  * @oh: struct omap_hwmod *
@@ -2017,29 +1968,6 @@ static int _reset(struct omap_hwmod *oh)
 	return r;
 }
 
-/**
- * _reconfigure_io_chain - clear any I/O chain wakeups and reconfigure chain
- *
- * Call the appropriate PRM function to clear any logged I/O chain
- * wakeups and to reconfigure the chain.  This apparently needs to be
- * done upon every mux change.  Since hwmods can be concurrently
- * enabled and idled, hold a spinlock around the I/O chain
- * reconfiguration sequence.  No return value.
- *
- * XXX When the PRM code is moved to drivers, this function can be removed,
- * as the PRM infrastructure should abstract this.
- */
-static void _reconfigure_io_chain(void)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&io_chain_lock, flags);
-
-	omap_prm_reconfigure_io_chain();
-
-	spin_unlock_irqrestore(&io_chain_lock, flags);
-}
-
 /**
  * _omap4_update_context_lost - increment hwmod context loss counter if
  * hwmod context was lost, and clear hardware context loss reg
@@ -2109,18 +2037,9 @@ static int _enable(struct omap_hwmod *oh)
 
 	/*
 	 * hwmods with HWMOD_INIT_NO_IDLE flag set are left in enabled
-	 * state at init.  Now that someone is really trying to enable
-	 * them, just ensure that the hwmod mux is set.
+	 * state at init.
 	 */
 	if (oh->_int_flags & _HWMOD_SKIP_ENABLE) {
-		/*
-		 * If the caller has mux data populated, do the mux'ing
-		 * which wouldn't have been done as part of the _enable()
-		 * done during setup.
-		 */
-		if (oh->mux)
-			omap_hwmod_mux(oh->mux, _HWMOD_STATE_ENABLED);
-
 		oh->_int_flags &= ~_HWMOD_SKIP_ENABLE;
 		return 0;
 	}
@@ -2145,16 +2064,6 @@ static int _enable(struct omap_hwmod *oh)
 	if (_are_all_hardreset_lines_asserted(oh))
 		return 0;
 
-	/* Mux pins for device runtime if populated */
-	if (oh->mux && (!oh->mux->enabled ||
-			((oh->_state == _HWMOD_STATE_IDLE) &&
-			 oh->mux->pads_dynamic))) {
-		omap_hwmod_mux(oh->mux, _HWMOD_STATE_ENABLED);
-		_reconfigure_io_chain();
-	} else if (oh->flags & HWMOD_RECONFIG_IO_CHAIN) {
-		_reconfigure_io_chain();
-	}
-
 	_add_initiator_dep(oh, mpu_oh);
 
 	if (oh->clkdm) {
@@ -2260,14 +2169,6 @@ static int _idle(struct omap_hwmod *oh)
 		clkdm_hwmod_disable(oh->clkdm, oh);
 	}
 
-	/* Mux pins for device idle if populated */
-	if (oh->mux && oh->mux->pads_dynamic) {
-		omap_hwmod_mux(oh->mux, _HWMOD_STATE_IDLE);
-		_reconfigure_io_chain();
-	} else if (oh->flags & HWMOD_RECONFIG_IO_CHAIN) {
-		_reconfigure_io_chain();
-	}
-
 	oh->_state = _HWMOD_STATE_IDLE;
 
 	return 0;
@@ -2334,10 +2235,6 @@ static int _shutdown(struct omap_hwmod *oh)
 	for (i = 0; i < oh->rst_lines_cnt; i++)
 		_assert_hardreset(oh, oh->rst_lines[i].name);
 
-	/* Mux pins to safe mode or use populated off mode values */
-	if (oh->mux)
-		omap_hwmod_mux(oh->mux, _HWMOD_STATE_DISABLED);
-
 	oh->_state = _HWMOD_STATE_DISABLED;
 
 	return 0;
@@ -3729,7 +3626,6 @@ int omap_hwmod_enable_wakeup(struct omap_hwmod *oh)
 		_write_sysconfig(v, oh);
 	}
 
-	_set_idle_ioring_wakeup(oh, true);
 	spin_unlock_irqrestore(&oh->_lock, flags);
 
 	return 0;
@@ -3762,7 +3658,6 @@ int omap_hwmod_disable_wakeup(struct omap_hwmod *oh)
 		_write_sysconfig(v, oh);
 	}
 
-	_set_idle_ioring_wakeup(oh, false);
 	spin_unlock_irqrestore(&oh->_lock, flags);
 
 	return 0;

arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c

@@ -17,156 +17,11 @@
 
 #include "omap_hwmod_common_data.h"
 
-struct omap_hwmod_addr_space omap2430_mmc1_addr_space[] = {
-	{
-		.pa_start	= 0x4809c000,
-		.pa_end		= 0x4809c1ff,
-		.flags		= ADDR_TYPE_RT,
-	},
-	{ }
-};
-
-struct omap_hwmod_addr_space omap2430_mmc2_addr_space[] = {
-	{
-		.pa_start	= 0x480b4000,
-		.pa_end		= 0x480b41ff,
-		.flags		= ADDR_TYPE_RT,
-	},
-	{ }
-};
-
-struct omap_hwmod_addr_space omap2_i2c1_addr_space[] = {
-	{
-		.pa_start	= 0x48070000,
-		.pa_end		= 0x48070000 + SZ_128 - 1,
-		.flags		= ADDR_TYPE_RT,
-	},
-	{ }
-};
-
-struct omap_hwmod_addr_space omap2_i2c2_addr_space[] = {
-	{
-		.pa_start	= 0x48072000,
-		.pa_end		= 0x48072000 + SZ_128 - 1,
-		.flags		= ADDR_TYPE_RT,
-	},
-	{ }
-};
-
-struct omap_hwmod_addr_space omap2_dss_addrs[] = {
-	{
-		.pa_start	= 0x48050000,
-		.pa_end		= 0x48050000 + SZ_1K - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-struct omap_hwmod_addr_space omap2_dss_dispc_addrs[] = {
-	{
-		.pa_start	= 0x48050400,
-		.pa_end		= 0x48050400 + SZ_1K - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-struct omap_hwmod_addr_space omap2_dss_rfbi_addrs[] = {
-	{
-		.pa_start	= 0x48050800,
-		.pa_end		= 0x48050800 + SZ_1K - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-struct omap_hwmod_addr_space omap2_dss_venc_addrs[] = {
-	{
-		.pa_start	= 0x48050C00,
-		.pa_end		= 0x48050C00 + SZ_1K - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-struct omap_hwmod_addr_space omap2_timer10_addrs[] = {
-	{
-		.pa_start	= 0x48086000,
-		.pa_end		= 0x48086000 + SZ_1K - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-struct omap_hwmod_addr_space omap2_timer11_addrs[] = {
-	{
-		.pa_start	= 0x48088000,
-		.pa_end		= 0x48088000 + SZ_1K - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-struct omap_hwmod_addr_space omap2xxx_timer12_addrs[] = {
-	{
-		.pa_start	= 0x4808a000,
-		.pa_end		= 0x4808a000 + SZ_1K - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-struct omap_hwmod_addr_space omap2_mcspi1_addr_space[] = {
-	{
-		.pa_start	= 0x48098000,
-		.pa_end		= 0x48098000 + SZ_256 - 1,
-		.flags		= ADDR_TYPE_RT,
-	},
-	{ }
-};
-
-struct omap_hwmod_addr_space omap2_mcspi2_addr_space[] = {
-	{
-		.pa_start	= 0x4809a000,
-		.pa_end		= 0x4809a000 + SZ_256 - 1,
-		.flags		= ADDR_TYPE_RT,
-	},
-	{ }
-};
-
-struct omap_hwmod_addr_space omap2430_mcspi3_addr_space[] = {
-	{
-		.pa_start	= 0x480b8000,
-		.pa_end		= 0x480b8000 + SZ_256 - 1,
-		.flags		= ADDR_TYPE_RT,
-	},
-	{ }
-};
-
 struct omap_hwmod_addr_space omap2_dma_system_addrs[] = {
 	{
 		.pa_start	= 0x48056000,
 		.pa_end		= 0x48056000 + SZ_4K - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-struct omap_hwmod_addr_space omap2_mcbsp1_addrs[] = {
-	{
-		.name		= "mpu",
-		.pa_start	= 0x48074000,
-		.pa_end		= 0x480740ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-struct omap_hwmod_addr_space omap2_hdq1w_addr_space[] = {
-	{
-		.pa_start       = 0x480b2000,
-		.pa_end         = 0x480b2fff,
-		.flags          = ADDR_TYPE_RT,
+		.flags		= ADDR_TYPE_RT,
 	},
-	{ }
+	{ },
 };

arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c

@@ -45,204 +45,31 @@ struct omap_hwmod_class omap2_venc_hwmod_class = {
 	.name = "venc",
 };
 
-
-/* Common DMA request line data */
-struct omap_hwmod_dma_info omap2_uart1_sdma_reqs[] = {
-	{ .name = "rx", .dma_req = 50, },
-	{ .name = "tx", .dma_req = 49, },
-	{ .dma_req = -1 }
-};
-
-struct omap_hwmod_dma_info omap2_uart2_sdma_reqs[] = {
-	{ .name = "rx", .dma_req = 52, },
-	{ .name = "tx", .dma_req = 51, },
-	{ .dma_req = -1 }
-};
-
-struct omap_hwmod_dma_info omap2_uart3_sdma_reqs[] = {
-	{ .name = "rx", .dma_req = 54, },
-	{ .name = "tx", .dma_req = 53, },
-	{ .dma_req = -1 }
-};
-
-struct omap_hwmod_dma_info omap2_i2c1_sdma_reqs[] = {
-	{ .name = "tx", .dma_req = 27 },
-	{ .name = "rx", .dma_req = 28 },
-	{ .dma_req = -1 }
-};
-
-struct omap_hwmod_dma_info omap2_i2c2_sdma_reqs[] = {
-	{ .name = "tx", .dma_req = 29 },
-	{ .name = "rx", .dma_req = 30 },
-	{ .dma_req = -1 }
-};
-
-struct omap_hwmod_dma_info omap2_mcspi1_sdma_reqs[] = {
-	{ .name = "tx0", .dma_req = 35 }, /* DMA_SPI1_TX0 */
-	{ .name = "rx0", .dma_req = 36 }, /* DMA_SPI1_RX0 */
-	{ .name = "tx1", .dma_req = 37 }, /* DMA_SPI1_TX1 */
-	{ .name = "rx1", .dma_req = 38 }, /* DMA_SPI1_RX1 */
-	{ .name = "tx2", .dma_req = 39 }, /* DMA_SPI1_TX2 */
-	{ .name = "rx2", .dma_req = 40 }, /* DMA_SPI1_RX2 */
-	{ .name = "tx3", .dma_req = 41 }, /* DMA_SPI1_TX3 */
-	{ .name = "rx3", .dma_req = 42 }, /* DMA_SPI1_RX3 */
-	{ .dma_req = -1 }
-};
-
-struct omap_hwmod_dma_info omap2_mcspi2_sdma_reqs[] = {
-	{ .name = "tx0", .dma_req = 43 }, /* DMA_SPI2_TX0 */
-	{ .name = "rx0", .dma_req = 44 }, /* DMA_SPI2_RX0 */
-	{ .name = "tx1", .dma_req = 45 }, /* DMA_SPI2_TX1 */
-	{ .name = "rx1", .dma_req = 46 }, /* DMA_SPI2_RX1 */
-	{ .dma_req = -1 }
-};
-
-struct omap_hwmod_dma_info omap2_mcbsp1_sdma_reqs[] = {
-	{ .name = "rx", .dma_req = 32 },
-	{ .name = "tx", .dma_req = 31 },
-	{ .dma_req = -1 }
-};
-
-struct omap_hwmod_dma_info omap2_mcbsp2_sdma_reqs[] = {
-	{ .name = "rx", .dma_req = 34 },
-	{ .name = "tx", .dma_req = 33 },
-	{ .dma_req = -1 }
-};
-
-struct omap_hwmod_dma_info omap2_mcbsp3_sdma_reqs[] = {
-	{ .name = "rx", .dma_req = 18 },
-	{ .name = "tx", .dma_req = 17 },
-	{ .dma_req = -1 }
-};
-
-/* Other IP block data */
-
-
 /*
  * omap_hwmod class data
  */
 
 struct omap_hwmod_class l3_hwmod_class = {
-	.name = "l3"
+	.name = "l3",
 };
 
 struct omap_hwmod_class l4_hwmod_class = {
-	.name = "l4"
+	.name = "l4",
 };
 
 struct omap_hwmod_class mpu_hwmod_class = {
-	.name = "mpu"
+	.name = "mpu",
 };
 
 struct omap_hwmod_class iva_hwmod_class = {
-	.name = "iva"
+	.name = "iva",
 };
 
 /* Common MPU IRQ line data */
 
-struct omap_hwmod_irq_info omap2_timer1_mpu_irqs[] = {
-	{ .irq = 37 + OMAP_INTC_START, },
-	{ .irq = -1 },
-};
-
-struct omap_hwmod_irq_info omap2_timer2_mpu_irqs[] = {
-	{ .irq = 38 + OMAP_INTC_START, },
-	{ .irq = -1 },
-};
-
-struct omap_hwmod_irq_info omap2_timer3_mpu_irqs[] = {
-	{ .irq = 39 + OMAP_INTC_START, },
-	{ .irq = -1 },
-};
-
-struct omap_hwmod_irq_info omap2_timer4_mpu_irqs[] = {
-	{ .irq = 40 + OMAP_INTC_START, },
-	{ .irq = -1 },
-};
-
-struct omap_hwmod_irq_info omap2_timer5_mpu_irqs[] = {
-	{ .irq = 41 + OMAP_INTC_START, },
-	{ .irq = -1 },
-};
-
-struct omap_hwmod_irq_info omap2_timer6_mpu_irqs[] = {
-	{ .irq = 42 + OMAP_INTC_START, },
-	{ .irq = -1 },
-};
-
-struct omap_hwmod_irq_info omap2_timer7_mpu_irqs[] = {
-	{ .irq = 43 + OMAP_INTC_START, },
-	{ .irq = -1 },
-};
-
-struct omap_hwmod_irq_info omap2_timer8_mpu_irqs[] = {
-	{ .irq = 44 + OMAP_INTC_START, },
-	{ .irq = -1 },
-};
-
-struct omap_hwmod_irq_info omap2_timer9_mpu_irqs[] = {
-	{ .irq = 45 + OMAP_INTC_START, },
-	{ .irq = -1 },
-};
-
-struct omap_hwmod_irq_info omap2_timer10_mpu_irqs[] = {
-	{ .irq = 46 + OMAP_INTC_START, },
-	{ .irq = -1 },
-};
-
-struct omap_hwmod_irq_info omap2_timer11_mpu_irqs[] = {
-	{ .irq = 47 + OMAP_INTC_START, },
-	{ .irq = -1 },
-};
-
-struct omap_hwmod_irq_info omap2_uart1_mpu_irqs[] = {
-	{ .irq = 72 + OMAP_INTC_START, },
-	{ .irq = -1 },
-};
-
-struct omap_hwmod_irq_info omap2_uart2_mpu_irqs[] = {
-	{ .irq = 73 + OMAP_INTC_START, },
-	{ .irq = -1 },
-};
-
-struct omap_hwmod_irq_info omap2_uart3_mpu_irqs[] = {
-	{ .irq = 74 + OMAP_INTC_START, },
-	{ .irq = -1 },
-};
-
 struct omap_hwmod_irq_info omap2_dispc_irqs[] = {
 	{ .irq = 25 + OMAP_INTC_START, },
-	{ .irq = -1 },
-};
-
-struct omap_hwmod_irq_info omap2_i2c1_mpu_irqs[] = {
-	{ .irq = 56 + OMAP_INTC_START, },
-	{ .irq = -1 },
-};
-
-struct omap_hwmod_irq_info omap2_i2c2_mpu_irqs[] = {
-	{ .irq = 57 + OMAP_INTC_START, },
-	{ .irq = -1 },
-};
-
-struct omap_hwmod_irq_info omap2_gpio1_irqs[] = {
-	{ .irq = 29 + OMAP_INTC_START, }, /* INT_24XX_GPIO_BANK1 */
-	{ .irq = -1 },
-};
-
-struct omap_hwmod_irq_info omap2_gpio2_irqs[] = {
-	{ .irq = 30 + OMAP_INTC_START, }, /* INT_24XX_GPIO_BANK2 */
-	{ .irq = -1 },
-};
-
-struct omap_hwmod_irq_info omap2_gpio3_irqs[] = {
-	{ .irq = 31 + OMAP_INTC_START, }, /* INT_24XX_GPIO_BANK3 */
-	{ .irq = -1 },
-};
-
-struct omap_hwmod_irq_info omap2_gpio4_irqs[] = {
-	{ .irq = 32 + OMAP_INTC_START, }, /* INT_24XX_GPIO_BANK4 */
-	{ .irq = -1 },
+	{ .irq = -1, },
 };
 
 struct omap_hwmod_irq_info omap2_dma_system_irqs[] = {
@@ -250,17 +77,7 @@ struct omap_hwmod_irq_info omap2_dma_system_irqs[] = {
 	{ .name = "1", .irq = 13 + OMAP_INTC_START, }, /* INT_24XX_SDMA_IRQ1 */
 	{ .name = "2", .irq = 14 + OMAP_INTC_START, }, /* INT_24XX_SDMA_IRQ2 */
 	{ .name = "3", .irq = 15 + OMAP_INTC_START, }, /* INT_24XX_SDMA_IRQ3 */
-	{ .irq = -1 },
-};
-
-struct omap_hwmod_irq_info omap2_mcspi1_mpu_irqs[] = {
-	{ .irq = 65 + OMAP_INTC_START, },
-	{ .irq = -1 },
-};
-
-struct omap_hwmod_irq_info omap2_mcspi2_mpu_irqs[] = {
-	{ .irq = 66 + OMAP_INTC_START, },
-	{ .irq = -1 },
+	{ .irq = -1, },
 };
 
 struct omap_hwmod_class_sysconfig omap2_hdq1w_sysc = {
@@ -277,9 +94,3 @@ struct omap_hwmod_class omap2_hdq1w_class = {
 	.sysc	= &omap2_hdq1w_sysc,
 	.reset	= &omap_hdq1w_reset,
 };
-
-struct omap_hwmod_irq_info omap2_hdq1w_mpu_irqs[] = {
-	{ .irq = 58 + OMAP_INTC_START, },
-	{ .irq = -1 },
-};
-

arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c

@@ -191,7 +191,6 @@ struct omap_hwmod_ocp_if omap2xxx_l4_core__dss = {
 	.master		= &omap2xxx_l4_core_hwmod,
 	.slave		= &omap2xxx_dss_core_hwmod,
 	.clk		= "dss_ick",
-	.addr		= omap2_dss_addrs,
 	.fw = {
 		.omap2 = {
 			.l4_fw_region  = OMAP2420_L4_CORE_FW_DSS_CORE_REGION,
@@ -206,7 +205,6 @@ struct omap_hwmod_ocp_if omap2xxx_l4_core__dss_dispc = {
 	.master		= &omap2xxx_l4_core_hwmod,
 	.slave		= &omap2xxx_dss_dispc_hwmod,
 	.clk		= "dss_ick",
-	.addr		= omap2_dss_dispc_addrs,
 	.fw = {
 		.omap2 = {
 			.l4_fw_region  = OMAP2420_L4_CORE_FW_DSS_DISPC_REGION,
@@ -221,7 +219,6 @@ struct omap_hwmod_ocp_if omap2xxx_l4_core__dss_rfbi = {
 	.master		= &omap2xxx_l4_core_hwmod,
 	.slave		= &omap2xxx_dss_rfbi_hwmod,
 	.clk		= "dss_ick",
-	.addr		= omap2_dss_rfbi_addrs,
 	.fw = {
 		.omap2 = {
 			.l4_fw_region  = OMAP2420_L4_CORE_FW_DSS_CORE_REGION,
@@ -236,7 +233,6 @@ struct omap_hwmod_ocp_if omap2xxx_l4_core__dss_venc = {
 	.master		= &omap2xxx_l4_core_hwmod,
 	.slave		= &omap2xxx_dss_venc_hwmod,
 	.clk		= "dss_ick",
-	.addr		= omap2_dss_venc_addrs,
 	.fw = {
 		.omap2 = {
 			.l4_fw_region  = OMAP2420_L4_CORE_FW_DSS_VENC_REGION,

arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c

@@ -569,7 +569,6 @@ struct omap_hwmod omap2xxx_dss_core_hwmod = {
 struct omap_hwmod omap2xxx_dss_dispc_hwmod = {
 	.name		= "dss_dispc",
 	.class		= &omap2_dispc_hwmod_class,
-	.mpu_irqs	= omap2_dispc_irqs,
 	.main_clk	= "dss1_fck",
 	.prcm		= {
 		.omap2 = {

arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h

@@ -68,6 +68,7 @@ extern struct omap_hwmod_ocp_if am33xx_l4_ls__uart6;
 extern struct omap_hwmod_ocp_if am33xx_l3_main__ocmc;
 extern struct omap_hwmod_ocp_if am33xx_l3_main__sha0;
 extern struct omap_hwmod_ocp_if am33xx_l3_main__aes0;
+extern struct omap_hwmod_ocp_if am33xx_l4_per__rng;
 
 extern struct omap_hwmod am33xx_l3_main_hwmod;
 extern struct omap_hwmod am33xx_l3_s_hwmod;
@@ -80,6 +81,7 @@ extern struct omap_hwmod am33xx_gfx_hwmod;
 extern struct omap_hwmod am33xx_prcm_hwmod;
 extern struct omap_hwmod am33xx_aes0_hwmod;
 extern struct omap_hwmod am33xx_sha0_hwmod;
+extern struct omap_hwmod am33xx_rng_hwmod;
 extern struct omap_hwmod am33xx_ocmcram_hwmod;
 extern struct omap_hwmod am33xx_smartreflex0_hwmod;
 extern struct omap_hwmod am33xx_smartreflex1_hwmod;

arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c

@@ -547,3 +547,11 @@ struct omap_hwmod_ocp_if am33xx_l3_main__aes0 = {
 	.addr		= am33xx_aes0_addrs,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
+
+/* l4 per -> rng */
+struct omap_hwmod_ocp_if am33xx_l4_per__rng = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_rng_hwmod,
+	.clk		= "rng_fck",
+	.user		= OCP_USER_MPU,
+};

arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c

@@ -268,6 +268,33 @@ struct omap_hwmod am33xx_sha0_hwmod = {
 	},
 };
 
+/* rng */
+static struct omap_hwmod_class_sysconfig am33xx_rng_sysc = {
+	.rev_offs	= 0x1fe0,
+	.sysc_offs	= 0x1fe4,
+	.sysc_flags	= SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE,
+	.idlemodes	= SIDLE_FORCE | SIDLE_NO,
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class am33xx_rng_hwmod_class = {
+	.name		= "rng",
+	.sysc		= &am33xx_rng_sysc,
+};
+
+struct omap_hwmod am33xx_rng_hwmod = {
+	.name		= "rng",
+	.class		= &am33xx_rng_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.flags		= HWMOD_SWSUP_SIDLE,
+	.main_clk	= "rng_fck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
 /* ocmcram */
 static struct omap_hwmod_class am33xx_ocmcram_hwmod_class = {
 	.name = "ocmcram",
@@ -1315,6 +1342,7 @@ static void omap_hwmod_am33xx_clkctrl(void)
 	CLKCTRL(am33xx_ocmcram_hwmod , AM33XX_CM_PER_OCMCRAM_CLKCTRL_OFFSET);
 	CLKCTRL(am33xx_sha0_hwmod , AM33XX_CM_PER_SHA0_CLKCTRL_OFFSET);
 	CLKCTRL(am33xx_aes0_hwmod , AM33XX_CM_PER_AES0_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_rng_hwmod, AM33XX_CM_PER_RNG_CLKCTRL_OFFSET);
 }
 
 static void omap_hwmod_am33xx_rst(void)
@@ -1388,6 +1416,7 @@ static void omap_hwmod_am43xx_clkctrl(void)
 	CLKCTRL(am33xx_ocmcram_hwmod , AM43XX_CM_PER_OCMCRAM_CLKCTRL_OFFSET);
 	CLKCTRL(am33xx_sha0_hwmod , AM43XX_CM_PER_SHA0_CLKCTRL_OFFSET);
 	CLKCTRL(am33xx_aes0_hwmod , AM43XX_CM_PER_AES0_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_rng_hwmod, AM43XX_CM_PER_RNG_CLKCTRL_OFFSET);
 }
 
 static void omap_hwmod_am43xx_rst(void)

arch/arm/mach-omap2/omap_hwmod_33xx_data.c

@@ -503,41 +503,6 @@ static struct omap_hwmod_ocp_if am33xx_l3_s__usbss = {
 	.flags		= OCPIF_SWSUP_IDLE,
 };
 
-/* rng */
-static struct omap_hwmod_class_sysconfig am33xx_rng_sysc = {
-	.rev_offs	= 0x1fe0,
-	.sysc_offs	= 0x1fe4,
-	.sysc_flags	= SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE,
-	.idlemodes	= SIDLE_FORCE | SIDLE_NO,
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class am33xx_rng_hwmod_class = {
-	.name		= "rng",
-	.sysc		= &am33xx_rng_sysc,
-};
-
-static struct omap_hwmod am33xx_rng_hwmod = {
-	.name		= "rng",
-	.class		= &am33xx_rng_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.flags		= HWMOD_SWSUP_SIDLE,
-	.main_clk	= "rng_fck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_RNG_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-static struct omap_hwmod_ocp_if am33xx_l4_per__rng = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_rng_hwmod,
-	.clk		= "rng_fck",
-	.user		= OCP_USER_MPU,
-};
-
 static struct omap_hwmod_ocp_if *am33xx_hwmod_ocp_ifs[] __initdata = {
 	&am33xx_l3_main__emif,
 	&am33xx_mpu__l3_main,

arch/arm/mach-omap2/omap_hwmod_3xxx_data.c

@@ -53,16 +53,10 @@
  */
 
 /* L3 */
-static struct omap_hwmod_irq_info omap3xxx_l3_main_irqs[] = {
-	{ .irq = 9 + OMAP_INTC_START, },
-	{ .irq = 10 + OMAP_INTC_START, },
-	{ .irq = -1 },
-};
 
 static struct omap_hwmod omap3xxx_l3_main_hwmod = {
 	.name		= "l3_main",
 	.class		= &l3_hwmod_class,
-	.mpu_irqs	= omap3xxx_l3_main_irqs,
 	.flags		= HWMOD_NO_IDLEST,
 };
 
@@ -95,14 +89,9 @@ static struct omap_hwmod omap3xxx_l4_sec_hwmod = {
 };
 
 /* MPU */
-static struct omap_hwmod_irq_info omap3xxx_mpu_irqs[] = {
-	{ .name = "pmu", .irq = 3 + OMAP_INTC_START },
-	{ .irq = -1 }
-};
 
 static struct omap_hwmod omap3xxx_mpu_hwmod = {
 	.name		= "mpu",
-	.mpu_irqs	= omap3xxx_mpu_irqs,
 	.class		= &mpu_hwmod_class,
 	.main_clk	= "arm_fck",
 };
@@ -128,7 +117,7 @@ static struct omap_hwmod omap3xxx_iva_hwmod = {
 			.module_bit = OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT,
 			.idlest_reg_id = 1,
 			.idlest_idle_bit = OMAP3430_ST_IVA2_SHIFT,
-		}
+		},
 	},
 };
 
@@ -197,7 +186,6 @@ static struct omap_timer_capability_dev_attr capability_dsp_pwm_dev_attr = {
 /* timer1 */
 static struct omap_hwmod omap3xxx_timer1_hwmod = {
 	.name		= "timer1",
-	.mpu_irqs	= omap2_timer1_mpu_irqs,
 	.main_clk	= "gpt1_fck",
 	.prcm		= {
 		.omap2 = {
@@ -216,7 +204,6 @@ static struct omap_hwmod omap3xxx_timer1_hwmod = {
 /* timer2 */
 static struct omap_hwmod omap3xxx_timer2_hwmod = {
 	.name		= "timer2",
-	.mpu_irqs	= omap2_timer2_mpu_irqs,
 	.main_clk	= "gpt2_fck",
 	.prcm		= {
 		.omap2 = {
@@ -234,7 +221,6 @@ static struct omap_hwmod omap3xxx_timer2_hwmod = {
 /* timer3 */
 static struct omap_hwmod omap3xxx_timer3_hwmod = {
 	.name		= "timer3",
-	.mpu_irqs	= omap2_timer3_mpu_irqs,
 	.main_clk	= "gpt3_fck",
 	.prcm		= {
 		.omap2 = {
@@ -252,7 +238,6 @@ static struct omap_hwmod omap3xxx_timer3_hwmod = {
 /* timer4 */
 static struct omap_hwmod omap3xxx_timer4_hwmod = {
 	.name		= "timer4",
-	.mpu_irqs	= omap2_timer4_mpu_irqs,
 	.main_clk	= "gpt4_fck",
 	.prcm		= {
 		.omap2 = {
@@ -270,7 +255,6 @@ static struct omap_hwmod omap3xxx_timer4_hwmod = {
 /* timer5 */
 static struct omap_hwmod omap3xxx_timer5_hwmod = {
 	.name		= "timer5",
-	.mpu_irqs	= omap2_timer5_mpu_irqs,
 	.main_clk	= "gpt5_fck",
 	.prcm		= {
 		.omap2 = {
@@ -289,7 +273,6 @@ static struct omap_hwmod omap3xxx_timer5_hwmod = {
 /* timer6 */
 static struct omap_hwmod omap3xxx_timer6_hwmod = {
 	.name		= "timer6",
-	.mpu_irqs	= omap2_timer6_mpu_irqs,
 	.main_clk	= "gpt6_fck",
 	.prcm		= {
 		.omap2 = {
@@ -308,7 +291,6 @@ static struct omap_hwmod omap3xxx_timer6_hwmod = {
 /* timer7 */
 static struct omap_hwmod omap3xxx_timer7_hwmod = {
 	.name		= "timer7",
-	.mpu_irqs	= omap2_timer7_mpu_irqs,
 	.main_clk	= "gpt7_fck",
 	.prcm		= {
 		.omap2 = {
@@ -327,7 +309,6 @@ static struct omap_hwmod omap3xxx_timer7_hwmod = {
 /* timer8 */
 static struct omap_hwmod omap3xxx_timer8_hwmod = {
 	.name		= "timer8",
-	.mpu_irqs	= omap2_timer8_mpu_irqs,
 	.main_clk	= "gpt8_fck",
 	.prcm		= {
 		.omap2 = {
@@ -346,7 +327,6 @@ static struct omap_hwmod omap3xxx_timer8_hwmod = {
 /* timer9 */
 static struct omap_hwmod omap3xxx_timer9_hwmod = {
 	.name		= "timer9",
-	.mpu_irqs	= omap2_timer9_mpu_irqs,
 	.main_clk	= "gpt9_fck",
 	.prcm		= {
 		.omap2 = {
@@ -365,7 +345,6 @@ static struct omap_hwmod omap3xxx_timer9_hwmod = {
 /* timer10 */
 static struct omap_hwmod omap3xxx_timer10_hwmod = {
 	.name		= "timer10",
-	.mpu_irqs	= omap2_timer10_mpu_irqs,
 	.main_clk	= "gpt10_fck",
 	.prcm		= {
 		.omap2 = {
@@ -384,7 +363,6 @@ static struct omap_hwmod omap3xxx_timer10_hwmod = {
 /* timer11 */
 static struct omap_hwmod omap3xxx_timer11_hwmod = {
 	.name		= "timer11",
-	.mpu_irqs	= omap2_timer11_mpu_irqs,
 	.main_clk	= "gpt11_fck",
 	.prcm		= {
 		.omap2 = {
@@ -401,14 +379,9 @@ static struct omap_hwmod omap3xxx_timer11_hwmod = {
 };
 
 /* timer12 */
-static struct omap_hwmod_irq_info omap3xxx_timer12_mpu_irqs[] = {
-	{ .irq = 95 + OMAP_INTC_START, },
-	{ .irq = -1 },
-};
 
 static struct omap_hwmod omap3xxx_timer12_hwmod = {
 	.name		= "timer12",
-	.mpu_irqs	= omap3xxx_timer12_mpu_irqs,
 	.main_clk	= "gpt12_fck",
 	.prcm		= {
 		.omap2 = {
@@ -485,8 +458,6 @@ static struct omap_hwmod omap3xxx_wd_timer2_hwmod = {
 /* UART1 */
 static struct omap_hwmod omap3xxx_uart1_hwmod = {
 	.name		= "uart1",
-	.mpu_irqs	= omap2_uart1_mpu_irqs,
-	.sdma_reqs	= omap2_uart1_sdma_reqs,
 	.main_clk	= "uart1_fck",
 	.flags		= DEBUG_TI81XXUART1_FLAGS | HWMOD_SWSUP_SIDLE,
 	.prcm		= {
@@ -504,8 +475,6 @@ static struct omap_hwmod omap3xxx_uart1_hwmod = {
 /* UART2 */
 static struct omap_hwmod omap3xxx_uart2_hwmod = {
 	.name		= "uart2",
-	.mpu_irqs	= omap2_uart2_mpu_irqs,
-	.sdma_reqs	= omap2_uart2_sdma_reqs,
 	.main_clk	= "uart2_fck",
 	.flags		= DEBUG_TI81XXUART2_FLAGS | HWMOD_SWSUP_SIDLE,
 	.prcm		= {
@@ -523,8 +492,6 @@ static struct omap_hwmod omap3xxx_uart2_hwmod = {
 /* UART3 */
 static struct omap_hwmod omap3xxx_uart3_hwmod = {
 	.name		= "uart3",
-	.mpu_irqs	= omap2_uart3_mpu_irqs,
-	.sdma_reqs	= omap2_uart3_sdma_reqs,
 	.main_clk	= "uart3_fck",
 	.flags		= DEBUG_OMAP3UART3_FLAGS | DEBUG_TI81XXUART3_FLAGS |
 				HWMOD_SWSUP_SIDLE,
@@ -541,21 +508,10 @@ static struct omap_hwmod omap3xxx_uart3_hwmod = {
 };
 
 /* UART4 */
-static struct omap_hwmod_irq_info uart4_mpu_irqs[] = {
-	{ .irq = 80 + OMAP_INTC_START, },
-	{ .irq = -1 },
-};
 
-static struct omap_hwmod_dma_info uart4_sdma_reqs[] = {
-	{ .name = "rx",	.dma_req = 82, },
-	{ .name = "tx",	.dma_req = 81, },
-	{ .dma_req = -1 }
-};
 
 static struct omap_hwmod omap36xx_uart4_hwmod = {
 	.name		= "uart4",
-	.mpu_irqs	= uart4_mpu_irqs,
-	.sdma_reqs	= uart4_sdma_reqs,
 	.main_clk	= "uart4_fck",
 	.flags		= DEBUG_OMAP3UART4_FLAGS | HWMOD_SWSUP_SIDLE,
 	.prcm		= {
@@ -570,16 +526,7 @@ static struct omap_hwmod omap36xx_uart4_hwmod = {
 	.class		= &omap2_uart_class,
 };
 
-static struct omap_hwmod_irq_info am35xx_uart4_mpu_irqs[] = {
-	{ .irq = 84 + OMAP_INTC_START, },
-	{ .irq = -1 },
-};
 
-static struct omap_hwmod_dma_info am35xx_uart4_sdma_reqs[] = {
-	{ .name = "rx", .dma_req = 55, },
-	{ .name = "tx", .dma_req = 54, },
-	{ .dma_req = -1 }
-};
 
 /*
  * XXX AM35xx UART4 cannot complete its softreset without uart1_fck or
@@ -597,8 +544,6 @@ static struct omap_hwmod_opt_clk am35xx_uart4_opt_clks[] = {
 
 static struct omap_hwmod am35xx_uart4_hwmod = {
 	.name		= "uart4",
-	.mpu_irqs	= am35xx_uart4_mpu_irqs,
-	.sdma_reqs	= am35xx_uart4_sdma_reqs,
 	.main_clk	= "uart4_fck",
 	.prcm		= {
 		.omap2 = {
@@ -625,7 +570,7 @@ static struct omap_hwmod_class i2c_class = {
 static struct omap_hwmod_dma_info omap3xxx_dss_sdma_chs[] = {
 	{ .name = "dispc", .dma_req = 5 },
 	{ .name = "dsi1", .dma_req = 74 },
-	{ .dma_req = -1 }
+	{ .dma_req = -1, },
 };
 
 /* dss */
@@ -714,7 +659,7 @@ static struct omap_hwmod omap3xxx_dss_dispc_hwmod = {
 		},
 	},
 	.flags		= HWMOD_NO_IDLEST,
-	.dev_attr	= &omap2_3_dss_dispc_dev_attr
+	.dev_attr	= &omap2_3_dss_dispc_dev_attr,
 };
 
 /*
@@ -738,11 +683,6 @@ static struct omap_hwmod_class omap3xxx_dsi_hwmod_class = {
 	.sysc	= &omap3xxx_dsi_sysc,
 };
 
-static struct omap_hwmod_irq_info omap3xxx_dsi1_irqs[] = {
-	{ .irq = 25 + OMAP_INTC_START, },
-	{ .irq = -1 },
-};
-
 /* dss_dsi1 */
 static struct omap_hwmod_opt_clk dss_dsi1_opt_clks[] = {
 	{ .role = "sys_clk", .clk = "dss2_alwon_fck" },
@@ -751,7 +691,6 @@ static struct omap_hwmod_opt_clk dss_dsi1_opt_clks[] = {
 static struct omap_hwmod omap3xxx_dss_dsi1_hwmod = {
 	.name		= "dss_dsi1",
 	.class		= &omap3xxx_dsi_hwmod_class,
-	.mpu_irqs	= omap3xxx_dsi1_irqs,
 	.main_clk	= "dss1_alwon_fck",
 	.prcm		= {
 		.omap2 = {
@@ -815,8 +754,6 @@ static struct omap_i2c_dev_attr i2c1_dev_attr = {
 static struct omap_hwmod omap3xxx_i2c1_hwmod = {
 	.name		= "i2c1",
 	.flags		= HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
-	.mpu_irqs	= omap2_i2c1_mpu_irqs,
-	.sdma_reqs	= omap2_i2c1_sdma_reqs,
 	.main_clk	= "i2c1_fck",
 	.prcm		= {
 		.omap2 = {
@@ -840,8 +777,6 @@ static struct omap_i2c_dev_attr i2c2_dev_attr = {
 static struct omap_hwmod omap3xxx_i2c2_hwmod = {
 	.name		= "i2c2",
 	.flags		= HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
-	.mpu_irqs	= omap2_i2c2_mpu_irqs,
-	.sdma_reqs	= omap2_i2c2_sdma_reqs,
 	.main_clk	= "i2c2_fck",
 	.prcm		= {
 		.omap2 = {
@@ -862,22 +797,11 @@ static struct omap_i2c_dev_attr i2c3_dev_attr = {
 	.flags = OMAP_I2C_FLAG_BUS_SHIFT_2,
 };
 
-static struct omap_hwmod_irq_info i2c3_mpu_irqs[] = {
-	{ .irq = 61 + OMAP_INTC_START, },
-	{ .irq = -1 },
-};
 
-static struct omap_hwmod_dma_info i2c3_sdma_reqs[] = {
-	{ .name = "tx", .dma_req = 25 },
-	{ .name = "rx", .dma_req = 26 },
-	{ .dma_req = -1 }
-};
 
 static struct omap_hwmod omap3xxx_i2c3_hwmod = {
 	.name		= "i2c3",
 	.flags		= HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
-	.mpu_irqs	= i2c3_mpu_irqs,
-	.sdma_reqs	= i2c3_sdma_reqs,
 	.main_clk	= "i2c3_fck",
 	.prcm		= {
 		.omap2 = {
@@ -928,7 +852,6 @@ static struct omap_hwmod_opt_clk gpio1_opt_clks[] = {
 static struct omap_hwmod omap3xxx_gpio1_hwmod = {
 	.name		= "gpio1",
 	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
-	.mpu_irqs	= omap2_gpio1_irqs,
 	.main_clk	= "gpio1_ick",
 	.opt_clks	= gpio1_opt_clks,
 	.opt_clks_cnt	= ARRAY_SIZE(gpio1_opt_clks),
@@ -953,7 +876,6 @@ static struct omap_hwmod_opt_clk gpio2_opt_clks[] = {
 static struct omap_hwmod omap3xxx_gpio2_hwmod = {
 	.name		= "gpio2",
 	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
-	.mpu_irqs	= omap2_gpio2_irqs,
 	.main_clk	= "gpio2_ick",
 	.opt_clks	= gpio2_opt_clks,
 	.opt_clks_cnt	= ARRAY_SIZE(gpio2_opt_clks),
@@ -978,7 +900,6 @@ static struct omap_hwmod_opt_clk gpio3_opt_clks[] = {
 static struct omap_hwmod omap3xxx_gpio3_hwmod = {
 	.name		= "gpio3",
 	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
-	.mpu_irqs	= omap2_gpio3_irqs,
 	.main_clk	= "gpio3_ick",
 	.opt_clks	= gpio3_opt_clks,
 	.opt_clks_cnt	= ARRAY_SIZE(gpio3_opt_clks),
@@ -1003,7 +924,6 @@ static struct omap_hwmod_opt_clk gpio4_opt_clks[] = {
 static struct omap_hwmod omap3xxx_gpio4_hwmod = {
 	.name		= "gpio4",
 	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
-	.mpu_irqs	= omap2_gpio4_irqs,
 	.main_clk	= "gpio4_ick",
 	.opt_clks	= gpio4_opt_clks,
 	.opt_clks_cnt	= ARRAY_SIZE(gpio4_opt_clks),
@@ -1021,10 +941,6 @@ static struct omap_hwmod omap3xxx_gpio4_hwmod = {
 };
 
 /* gpio5 */
-static struct omap_hwmod_irq_info omap3xxx_gpio5_irqs[] = {
-	{ .irq = 33 + OMAP_INTC_START, }, /* INT_34XX_GPIO_BANK5 */
-	{ .irq = -1 },
-};
 
 static struct omap_hwmod_opt_clk gpio5_opt_clks[] = {
 	{ .role = "dbclk", .clk = "gpio5_dbck", },
@@ -1033,7 +949,6 @@ static struct omap_hwmod_opt_clk gpio5_opt_clks[] = {
 static struct omap_hwmod omap3xxx_gpio5_hwmod = {
 	.name		= "gpio5",
 	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
-	.mpu_irqs	= omap3xxx_gpio5_irqs,
 	.main_clk	= "gpio5_ick",
 	.opt_clks	= gpio5_opt_clks,
 	.opt_clks_cnt	= ARRAY_SIZE(gpio5_opt_clks),
@@ -1051,10 +966,6 @@ static struct omap_hwmod omap3xxx_gpio5_hwmod = {
 };
 
 /* gpio6 */
-static struct omap_hwmod_irq_info omap3xxx_gpio6_irqs[] = {
-	{ .irq = 34 + OMAP_INTC_START, }, /* INT_34XX_GPIO_BANK6 */
-	{ .irq = -1 },
-};
 
 static struct omap_hwmod_opt_clk gpio6_opt_clks[] = {
 	{ .role = "dbclk", .clk = "gpio6_dbck", },
@@ -1063,7 +974,6 @@ static struct omap_hwmod_opt_clk gpio6_opt_clks[] = {
 static struct omap_hwmod omap3xxx_gpio6_hwmod = {
 	.name		= "gpio6",
 	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
-	.mpu_irqs	= omap3xxx_gpio6_irqs,
 	.main_clk	= "gpio6_ick",
 	.opt_clks	= gpio6_opt_clks,
 	.opt_clks_cnt	= ARRAY_SIZE(gpio6_opt_clks),
@@ -1156,18 +1066,10 @@ static struct omap_hwmod_opt_clk mcbsp234_opt_clks[] = {
 };
 
 /* mcbsp1 */
-static struct omap_hwmod_irq_info omap3xxx_mcbsp1_irqs[] = {
-	{ .name = "common", .irq = 16 + OMAP_INTC_START, },
-	{ .name = "tx", .irq = 59 + OMAP_INTC_START, },
-	{ .name = "rx", .irq = 60 + OMAP_INTC_START, },
-	{ .irq = -1 },
-};
 
 static struct omap_hwmod omap3xxx_mcbsp1_hwmod = {
 	.name		= "mcbsp1",
 	.class		= &omap3xxx_mcbsp_hwmod_class,
-	.mpu_irqs	= omap3xxx_mcbsp1_irqs,
-	.sdma_reqs	= omap2_mcbsp1_sdma_reqs,
 	.main_clk	= "mcbsp1_fck",
 	.prcm		= {
 		.omap2 = {
@@ -1183,12 +1085,6 @@ static struct omap_hwmod omap3xxx_mcbsp1_hwmod = {
 };
 
 /* mcbsp2 */
-static struct omap_hwmod_irq_info omap3xxx_mcbsp2_irqs[] = {
-	{ .name = "common", .irq = 17 + OMAP_INTC_START, },
-	{ .name = "tx", .irq = 62 + OMAP_INTC_START, },
-	{ .name = "rx", .irq = 63 + OMAP_INTC_START, },
-	{ .irq = -1 },
-};
 
 static struct omap_mcbsp_dev_attr omap34xx_mcbsp2_dev_attr = {
 	.sidetone	= "mcbsp2_sidetone",
@@ -1197,8 +1093,6 @@ static struct omap_mcbsp_dev_attr omap34xx_mcbsp2_dev_attr = {
 static struct omap_hwmod omap3xxx_mcbsp2_hwmod = {
 	.name		= "mcbsp2",
 	.class		= &omap3xxx_mcbsp_hwmod_class,
-	.mpu_irqs	= omap3xxx_mcbsp2_irqs,
-	.sdma_reqs	= omap2_mcbsp2_sdma_reqs,
 	.main_clk	= "mcbsp2_fck",
 	.prcm		= {
 		.omap2 = {
@@ -1215,12 +1109,6 @@ static struct omap_hwmod omap3xxx_mcbsp2_hwmod = {
 };
 
 /* mcbsp3 */
-static struct omap_hwmod_irq_info omap3xxx_mcbsp3_irqs[] = {
-	{ .name = "common", .irq = 22 + OMAP_INTC_START, },
-	{ .name = "tx", .irq = 89 + OMAP_INTC_START, },
-	{ .name = "rx", .irq = 90 + OMAP_INTC_START, },
-	{ .irq = -1 },
-};
 
 static struct omap_mcbsp_dev_attr omap34xx_mcbsp3_dev_attr = {
 	.sidetone	= "mcbsp3_sidetone",
@@ -1229,8 +1117,6 @@ static struct omap_mcbsp_dev_attr omap34xx_mcbsp3_dev_attr = {
 static struct omap_hwmod omap3xxx_mcbsp3_hwmod = {
 	.name		= "mcbsp3",
 	.class		= &omap3xxx_mcbsp_hwmod_class,
-	.mpu_irqs	= omap3xxx_mcbsp3_irqs,
-	.sdma_reqs	= omap2_mcbsp3_sdma_reqs,
 	.main_clk	= "mcbsp3_fck",
 	.prcm		= {
 		.omap2 = {
@@ -1247,24 +1133,11 @@ static struct omap_hwmod omap3xxx_mcbsp3_hwmod = {
 };
 
 /* mcbsp4 */
-static struct omap_hwmod_irq_info omap3xxx_mcbsp4_irqs[] = {
-	{ .name = "common", .irq = 23 + OMAP_INTC_START, },
-	{ .name = "tx", .irq = 54 + OMAP_INTC_START, },
-	{ .name = "rx", .irq = 55 + OMAP_INTC_START, },
-	{ .irq = -1 },
-};
 
-static struct omap_hwmod_dma_info omap3xxx_mcbsp4_sdma_chs[] = {
-	{ .name = "rx", .dma_req = 20 },
-	{ .name = "tx", .dma_req = 19 },
-	{ .dma_req = -1 }
-};
 
 static struct omap_hwmod omap3xxx_mcbsp4_hwmod = {
 	.name		= "mcbsp4",
 	.class		= &omap3xxx_mcbsp_hwmod_class,
-	.mpu_irqs	= omap3xxx_mcbsp4_irqs,
-	.sdma_reqs	= omap3xxx_mcbsp4_sdma_chs,
 	.main_clk	= "mcbsp4_fck",
 	.prcm		= {
 		.omap2 = {
@@ -1280,24 +1153,11 @@ static struct omap_hwmod omap3xxx_mcbsp4_hwmod = {
 };
 
 /* mcbsp5 */
-static struct omap_hwmod_irq_info omap3xxx_mcbsp5_irqs[] = {
-	{ .name = "common", .irq = 27 + OMAP_INTC_START, },
-	{ .name = "tx", .irq = 81 + OMAP_INTC_START, },
-	{ .name = "rx", .irq = 82 + OMAP_INTC_START, },
-	{ .irq = -1 },
-};
 
-static struct omap_hwmod_dma_info omap3xxx_mcbsp5_sdma_chs[] = {
-	{ .name = "rx", .dma_req = 22 },
-	{ .name = "tx", .dma_req = 21 },
-	{ .dma_req = -1 }
-};
 
 static struct omap_hwmod omap3xxx_mcbsp5_hwmod = {
 	.name		= "mcbsp5",
 	.class		= &omap3xxx_mcbsp_hwmod_class,
-	.mpu_irqs	= omap3xxx_mcbsp5_irqs,
-	.sdma_reqs	= omap3xxx_mcbsp5_sdma_chs,
 	.main_clk	= "mcbsp5_fck",
 	.prcm		= {
 		.omap2 = {
@@ -1325,29 +1185,19 @@ static struct omap_hwmod_class omap3xxx_mcbsp_sidetone_hwmod_class = {
 };
 
 /* mcbsp2_sidetone */
-static struct omap_hwmod_irq_info omap3xxx_mcbsp2_sidetone_irqs[] = {
-	{ .name = "irq", .irq = 4 + OMAP_INTC_START, },
-	{ .irq = -1 },
-};
 
 static struct omap_hwmod omap3xxx_mcbsp2_sidetone_hwmod = {
 	.name		= "mcbsp2_sidetone",
 	.class		= &omap3xxx_mcbsp_sidetone_hwmod_class,
-	.mpu_irqs	= omap3xxx_mcbsp2_sidetone_irqs,
 	.main_clk	= "mcbsp2_ick",
 	.flags		= HWMOD_NO_IDLEST,
 };
 
 /* mcbsp3_sidetone */
-static struct omap_hwmod_irq_info omap3xxx_mcbsp3_sidetone_irqs[] = {
-	{ .name = "irq", .irq = 5 + OMAP_INTC_START, },
-	{ .irq = -1 },
-};
 
 static struct omap_hwmod omap3xxx_mcbsp3_sidetone_hwmod = {
 	.name		= "mcbsp3_sidetone",
 	.class		= &omap3xxx_mcbsp_sidetone_hwmod_class,
-	.mpu_irqs	= omap3xxx_mcbsp3_sidetone_irqs,
 	.main_clk	= "mcbsp3_ick",
 	.flags		= HWMOD_NO_IDLEST,
 };
@@ -1394,10 +1244,6 @@ static struct omap_smartreflex_dev_attr sr1_dev_attr = {
 	.sensor_voltdm_name   = "mpu_iva",
 };
 
-static struct omap_hwmod_irq_info omap3_smartreflex_mpu_irqs[] = {
-	{ .irq = 18 + OMAP_INTC_START, },
-	{ .irq = -1 },
-};
 
 static struct omap_hwmod omap34xx_sr1_hwmod = {
 	.name		= "smartreflex_mpu_iva",
@@ -1413,7 +1259,6 @@ static struct omap_hwmod omap34xx_sr1_hwmod = {
 		},
 	},
 	.dev_attr	= &sr1_dev_attr,
-	.mpu_irqs	= omap3_smartreflex_mpu_irqs,
 	.flags		= HWMOD_SET_DEFAULT_CLOCKACT,
 };
 
@@ -1431,7 +1276,6 @@ static struct omap_hwmod omap36xx_sr1_hwmod = {
 		},
 	},
 	.dev_attr	= &sr1_dev_attr,
-	.mpu_irqs	= omap3_smartreflex_mpu_irqs,
 };
 
 /* SR2 */
@@ -1439,10 +1283,6 @@ static struct omap_smartreflex_dev_attr sr2_dev_attr = {
 	.sensor_voltdm_name	= "core",
 };
 
-static struct omap_hwmod_irq_info omap3_smartreflex_core_irqs[] = {
-	{ .irq = 19 + OMAP_INTC_START, },
-	{ .irq = -1 },
-};
 
 static struct omap_hwmod omap34xx_sr2_hwmod = {
 	.name		= "smartreflex_core",
@@ -1458,7 +1298,6 @@ static struct omap_hwmod omap34xx_sr2_hwmod = {
 		},
 	},
 	.dev_attr	= &sr2_dev_attr,
-	.mpu_irqs	= omap3_smartreflex_core_irqs,
 	.flags		= HWMOD_SET_DEFAULT_CLOCKACT,
 };
 
@@ -1476,7 +1315,6 @@ static struct omap_hwmod omap36xx_sr2_hwmod = {
 		},
 	},
 	.dev_attr	= &sr2_dev_attr,
-	.mpu_irqs	= omap3_smartreflex_core_irqs,
 };
 
 /*
@@ -1545,8 +1383,6 @@ static struct omap2_mcspi_dev_attr omap_mcspi1_dev_attr = {
 
 static struct omap_hwmod omap34xx_mcspi1 = {
 	.name		= "mcspi1",
-	.mpu_irqs	= omap2_mcspi1_mpu_irqs,
-	.sdma_reqs	= omap2_mcspi1_sdma_reqs,
 	.main_clk	= "mcspi1_fck",
 	.prcm		= {
 		.omap2 = {
@@ -1568,8 +1404,6 @@ static struct omap2_mcspi_dev_attr omap_mcspi2_dev_attr = {
 
 static struct omap_hwmod omap34xx_mcspi2 = {
 	.name		= "mcspi2",
-	.mpu_irqs	= omap2_mcspi2_mpu_irqs,
-	.sdma_reqs	= omap2_mcspi2_sdma_reqs,
 	.main_clk	= "mcspi2_fck",
 	.prcm		= {
 		.omap2 = {
@@ -1585,18 +1419,7 @@ static struct omap_hwmod omap34xx_mcspi2 = {
 };
 
 /* mcspi3 */
-static struct omap_hwmod_irq_info omap34xx_mcspi3_mpu_irqs[] = {
-	{ .name = "irq", .irq = 91 + OMAP_INTC_START, }, /* 91 */
-	{ .irq = -1 },
-};
 
-static struct omap_hwmod_dma_info omap34xx_mcspi3_sdma_reqs[] = {
-	{ .name = "tx0", .dma_req = 15 },
-	{ .name = "rx0", .dma_req = 16 },
-	{ .name = "tx1", .dma_req = 23 },
-	{ .name = "rx1", .dma_req = 24 },
-	{ .dma_req = -1 }
-};
 
 static struct omap2_mcspi_dev_attr omap_mcspi3_dev_attr = {
 	.num_chipselect = 2,
@@ -1604,8 +1427,6 @@ static struct omap2_mcspi_dev_attr omap_mcspi3_dev_attr = {
 
 static struct omap_hwmod omap34xx_mcspi3 = {
 	.name		= "mcspi3",
-	.mpu_irqs	= omap34xx_mcspi3_mpu_irqs,
-	.sdma_reqs	= omap34xx_mcspi3_sdma_reqs,
 	.main_clk	= "mcspi3_fck",
 	.prcm		= {
 		.omap2 = {
@@ -1621,16 +1442,7 @@ static struct omap_hwmod omap34xx_mcspi3 = {
 };
 
 /* mcspi4 */
-static struct omap_hwmod_irq_info omap34xx_mcspi4_mpu_irqs[] = {
-	{ .name = "irq", .irq = 48 + OMAP_INTC_START, },
-	{ .irq = -1 },
-};
 
-static struct omap_hwmod_dma_info omap34xx_mcspi4_sdma_reqs[] = {
-	{ .name = "tx0", .dma_req = 70 }, /* DMA_SPI4_TX0 */
-	{ .name = "rx0", .dma_req = 71 }, /* DMA_SPI4_RX0 */
-	{ .dma_req = -1 }
-};
 
 static struct omap2_mcspi_dev_attr omap_mcspi4_dev_attr = {
 	.num_chipselect = 1,
@@ -1638,8 +1450,6 @@ static struct omap2_mcspi_dev_attr omap_mcspi4_dev_attr = {
 
 static struct omap_hwmod omap34xx_mcspi4 = {
 	.name		= "mcspi4",
-	.mpu_irqs	= omap34xx_mcspi4_mpu_irqs,
-	.sdma_reqs	= omap34xx_mcspi4_sdma_reqs,
 	.main_clk	= "mcspi4_fck",
 	.prcm		= {
 		.omap2 = {
@@ -1673,16 +1483,9 @@ static struct omap_hwmod_class usbotg_class = {
 };
 
 /* usb_otg_hs */
-static struct omap_hwmod_irq_info omap3xxx_usbhsotg_mpu_irqs[] = {
-
-	{ .name = "mc", .irq = 92 + OMAP_INTC_START, },
-	{ .name = "dma", .irq = 93 + OMAP_INTC_START, },
-	{ .irq = -1 },
-};
 
 static struct omap_hwmod omap3xxx_usbhsotg_hwmod = {
 	.name		= "usb_otg_hs",
-	.mpu_irqs	= omap3xxx_usbhsotg_mpu_irqs,
 	.main_clk	= "hsotgusb_ick",
 	.prcm		= {
 		.omap2 = {
@@ -1691,7 +1494,7 @@ static struct omap_hwmod omap3xxx_usbhsotg_hwmod = {
 			.module_offs = CORE_MOD,
 			.idlest_reg_id = 1,
 			.idlest_idle_bit = OMAP3430ES2_ST_HSOTGUSB_IDLE_SHIFT,
-			.idlest_stdby_bit = OMAP3430ES2_ST_HSOTGUSB_STDBY_SHIFT
+			.idlest_stdby_bit = OMAP3430ES2_ST_HSOTGUSB_STDBY_SHIFT,
 		},
 	},
 	.class		= &usbotg_class,
@@ -1711,10 +1514,6 @@ static struct omap_hwmod omap3xxx_usbhsotg_hwmod = {
 };
 
 /* usb_otg_hs */
-static struct omap_hwmod_irq_info am35xx_usbhsotg_mpu_irqs[] = {
-	{ .name = "mc", .irq = 71 + OMAP_INTC_START, },
-	{ .irq = -1 },
-};
 
 static struct omap_hwmod_class am35xx_usbotg_class = {
 	.name = "am35xx_usbotg",
@@ -1722,7 +1521,6 @@ static struct omap_hwmod_class am35xx_usbotg_class = {
 
 static struct omap_hwmod am35xx_usbhsotg_hwmod = {
 	.name		= "am35x_otg_hs",
-	.mpu_irqs	= am35xx_usbhsotg_mpu_irqs,
 	.main_clk	= "hsotgusb_fck",
 	.class		= &am35xx_usbotg_class,
 	.flags		= HWMOD_NO_IDLEST,
@@ -1747,16 +1545,7 @@ static struct omap_hwmod_class omap34xx_mmc_class = {
 
 /* MMC/SD/SDIO1 */
 
-static struct omap_hwmod_irq_info omap34xx_mmc1_mpu_irqs[] = {
-	{ .irq = 83 + OMAP_INTC_START, },
-	{ .irq = -1 },
-};
 
-static struct omap_hwmod_dma_info omap34xx_mmc1_sdma_reqs[] = {
-	{ .name = "tx",	.dma_req = 61, },
-	{ .name = "rx",	.dma_req = 62, },
-	{ .dma_req = -1 }
-};
 
 static struct omap_hwmod_opt_clk omap34xx_mmc1_opt_clks[] = {
 	{ .role = "dbck", .clk = "omap_32k_fck", },
@@ -1774,8 +1563,6 @@ static struct omap_hsmmc_dev_attr mmc1_pre_es3_dev_attr = {
 
 static struct omap_hwmod omap3xxx_pre_es3_mmc1_hwmod = {
 	.name		= "mmc1",
-	.mpu_irqs	= omap34xx_mmc1_mpu_irqs,
-	.sdma_reqs	= omap34xx_mmc1_sdma_reqs,
 	.opt_clks	= omap34xx_mmc1_opt_clks,
 	.opt_clks_cnt	= ARRAY_SIZE(omap34xx_mmc1_opt_clks),
 	.main_clk	= "mmchs1_fck",
@@ -1794,8 +1581,6 @@ static struct omap_hwmod omap3xxx_pre_es3_mmc1_hwmod = {
 
 static struct omap_hwmod omap3xxx_es3plus_mmc1_hwmod = {
 	.name		= "mmc1",
-	.mpu_irqs	= omap34xx_mmc1_mpu_irqs,
-	.sdma_reqs	= omap34xx_mmc1_sdma_reqs,
 	.opt_clks	= omap34xx_mmc1_opt_clks,
 	.opt_clks_cnt	= ARRAY_SIZE(omap34xx_mmc1_opt_clks),
 	.main_clk	= "mmchs1_fck",
@@ -1814,16 +1599,7 @@ static struct omap_hwmod omap3xxx_es3plus_mmc1_hwmod = {
 
 /* MMC/SD/SDIO2 */
 
-static struct omap_hwmod_irq_info omap34xx_mmc2_mpu_irqs[] = {
-	{ .irq = 86 + OMAP_INTC_START, },
-	{ .irq = -1 },
-};
 
-static struct omap_hwmod_dma_info omap34xx_mmc2_sdma_reqs[] = {
-	{ .name = "tx",	.dma_req = 47, },
-	{ .name = "rx",	.dma_req = 48, },
-	{ .dma_req = -1 }
-};
 
 static struct omap_hwmod_opt_clk omap34xx_mmc2_opt_clks[] = {
 	{ .role = "dbck", .clk = "omap_32k_fck", },
@@ -1836,8 +1612,6 @@ static struct omap_hsmmc_dev_attr mmc2_pre_es3_dev_attr = {
 
 static struct omap_hwmod omap3xxx_pre_es3_mmc2_hwmod = {
 	.name		= "mmc2",
-	.mpu_irqs	= omap34xx_mmc2_mpu_irqs,
-	.sdma_reqs	= omap34xx_mmc2_sdma_reqs,
 	.opt_clks	= omap34xx_mmc2_opt_clks,
 	.opt_clks_cnt	= ARRAY_SIZE(omap34xx_mmc2_opt_clks),
 	.main_clk	= "mmchs2_fck",
@@ -1856,8 +1630,6 @@ static struct omap_hwmod omap3xxx_pre_es3_mmc2_hwmod = {
 
 static struct omap_hwmod omap3xxx_es3plus_mmc2_hwmod = {
 	.name		= "mmc2",
-	.mpu_irqs	= omap34xx_mmc2_mpu_irqs,
-	.sdma_reqs	= omap34xx_mmc2_sdma_reqs,
 	.opt_clks	= omap34xx_mmc2_opt_clks,
 	.opt_clks_cnt	= ARRAY_SIZE(omap34xx_mmc2_opt_clks),
 	.main_clk	= "mmchs2_fck",
@@ -1875,16 +1647,7 @@ static struct omap_hwmod omap3xxx_es3plus_mmc2_hwmod = {
 
 /* MMC/SD/SDIO3 */
 
-static struct omap_hwmod_irq_info omap34xx_mmc3_mpu_irqs[] = {
-	{ .irq = 94 + OMAP_INTC_START, },
-	{ .irq = -1 },
-};
 
-static struct omap_hwmod_dma_info omap34xx_mmc3_sdma_reqs[] = {
-	{ .name = "tx",	.dma_req = 77, },
-	{ .name = "rx",	.dma_req = 78, },
-	{ .dma_req = -1 }
-};
 
 static struct omap_hwmod_opt_clk omap34xx_mmc3_opt_clks[] = {
 	{ .role = "dbck", .clk = "omap_32k_fck", },
@@ -1892,8 +1655,6 @@ static struct omap_hwmod_opt_clk omap34xx_mmc3_opt_clks[] = {
 
 static struct omap_hwmod omap3xxx_mmc3_hwmod = {
 	.name		= "mmc3",
-	.mpu_irqs	= omap34xx_mmc3_mpu_irqs,
-	.sdma_reqs	= omap34xx_mmc3_sdma_reqs,
 	.opt_clks	= omap34xx_mmc3_opt_clks,
 	.opt_clks_cnt	= ARRAY_SIZE(omap34xx_mmc3_opt_clks),
 	.main_clk	= "mmchs3_fck",
@@ -1931,17 +1692,11 @@ static struct omap_hwmod_class omap3xxx_usb_host_hs_hwmod_class = {
 	.sysc = &omap3xxx_usb_host_hs_sysc,
 };
 
-static struct omap_hwmod_irq_info omap3xxx_usb_host_hs_irqs[] = {
-	{ .name = "ohci-irq", .irq = 76 + OMAP_INTC_START, },
-	{ .name = "ehci-irq", .irq = 77 + OMAP_INTC_START, },
-	{ .irq = -1 },
-};
 
 static struct omap_hwmod omap3xxx_usb_host_hs_hwmod = {
 	.name		= "usb_host_hs",
 	.class		= &omap3xxx_usb_host_hs_hwmod_class,
 	.clkdm_name	= "usbhost_clkdm",
-	.mpu_irqs	= omap3xxx_usb_host_hs_irqs,
 	.main_clk	= "usbhost_48m_fck",
 	.prcm = {
 		.omap2 = {
@@ -2015,16 +1770,11 @@ static struct omap_hwmod_class omap3xxx_usb_tll_hs_hwmod_class = {
 	.sysc = &omap3xxx_usb_tll_hs_sysc,
 };
 
-static struct omap_hwmod_irq_info omap3xxx_usb_tll_hs_irqs[] = {
-	{ .name = "tll-irq", .irq = 78 + OMAP_INTC_START, },
-	{ .irq = -1 },
-};
 
 static struct omap_hwmod omap3xxx_usb_tll_hs_hwmod = {
 	.name		= "usb_tll_hs",
 	.class		= &omap3xxx_usb_tll_hs_hwmod_class,
 	.clkdm_name	= "core_l4_clkdm",
-	.mpu_irqs	= omap3xxx_usb_tll_hs_irqs,
 	.main_clk	= "usbtll_fck",
 	.prcm = {
 		.omap2 = {
@@ -2039,7 +1789,6 @@ static struct omap_hwmod omap3xxx_usb_tll_hs_hwmod = {
 
 static struct omap_hwmod omap3xxx_hdq1w_hwmod = {
 	.name		= "hdq1w",
-	.mpu_irqs	= omap2_hdq1w_mpu_irqs,
 	.main_clk	= "hdq_fck",
 	.prcm		= {
 		.omap2 = {
@@ -2134,16 +1883,10 @@ static struct omap_hwmod_class omap3xxx_gpmc_hwmod_class = {
 	.sysc	= &omap3xxx_gpmc_sysc,
 };
 
-static struct omap_hwmod_irq_info omap3xxx_gpmc_irqs[] = {
-	{ .irq = 20 + OMAP_INTC_START, },
-	{ .irq = -1 }
-};
-
 static struct omap_hwmod omap3xxx_gpmc_hwmod = {
 	.name		= "gpmc",
 	.class		= &omap3xxx_gpmc_hwmod_class,
 	.clkdm_name	= "core_l3_clkdm",
-	.mpu_irqs	= omap3xxx_gpmc_irqs,
 	.main_clk	= "gpmc_fck",
 	/* Skip reset for CONFIG_OMAP_GPMC_DEBUG for bootloader timings */
 	.flags		= HWMOD_NO_IDLEST | DEBUG_OMAP_GPMC_HWMOD_FLAGS,
@@ -2167,37 +1910,19 @@ static struct omap_hwmod_ocp_if omap3xxx_l3_main__l4_per = {
 	.user	= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-static struct omap_hwmod_addr_space omap3xxx_l3_main_addrs[] = {
-	{
-		.pa_start	= 0x68000000,
-		.pa_end		= 0x6800ffff,
-		.flags		= ADDR_TYPE_RT,
-	},
-	{ }
-};
 
 /* MPU -> L3 interface */
 static struct omap_hwmod_ocp_if omap3xxx_mpu__l3_main = {
 	.master   = &omap3xxx_mpu_hwmod,
 	.slave    = &omap3xxx_l3_main_hwmod,
-	.addr     = omap3xxx_l3_main_addrs,
 	.user	= OCP_USER_MPU,
 };
 
-static struct omap_hwmod_addr_space omap3xxx_l4_emu_addrs[] = {
-	{
-		.pa_start	= 0x54000000,
-		.pa_end		= 0x547fffff,
-		.flags		= ADDR_TYPE_RT,
-	},
-	{ }
-};
 
 /* l3 -> debugss */
 static struct omap_hwmod_ocp_if omap3xxx_l3_main__l4_debugss = {
 	.master		= &omap3xxx_l3_main_hwmod,
 	.slave		= &omap3xxx_debugss_hwmod,
-	.addr		= omap3xxx_l4_emu_addrs,
 	.user		= OCP_USER_MPU,
 };
 
@@ -2215,7 +1940,7 @@ static struct omap_hwmod_ocp_if omap3xxx_dss__l3 = {
 		.omap2 = {
 			.l3_perm_bit  = OMAP3_L3_CORE_FW_INIT_ID_DSS,
 			.flags	= OMAP_FIREWALL_L3,
-		}
+		},
 	},
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
@@ -2256,18 +1981,16 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__pre_es3_mmc1 = {
 	.master		= &omap3xxx_l4_core_hwmod,
 	.slave		= &omap3xxx_pre_es3_mmc1_hwmod,
 	.clk		= "mmchs1_ick",
-	.addr		= omap2430_mmc1_addr_space,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-	.flags		= OMAP_FIREWALL_L4
+	.flags		= OMAP_FIREWALL_L4,
 };
 
 static struct omap_hwmod_ocp_if omap3xxx_l4_core__es3plus_mmc1 = {
 	.master		= &omap3xxx_l4_core_hwmod,
 	.slave		= &omap3xxx_es3plus_mmc1_hwmod,
 	.clk		= "mmchs1_ick",
-	.addr		= omap2430_mmc1_addr_space,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-	.flags		= OMAP_FIREWALL_L4
+	.flags		= OMAP_FIREWALL_L4,
 };
 
 /* L4 CORE -> MMC2 interface */
@@ -2275,126 +1998,70 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__pre_es3_mmc2 = {
 	.master		= &omap3xxx_l4_core_hwmod,
 	.slave		= &omap3xxx_pre_es3_mmc2_hwmod,
 	.clk		= "mmchs2_ick",
-	.addr		= omap2430_mmc2_addr_space,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-	.flags		= OMAP_FIREWALL_L4
+	.flags		= OMAP_FIREWALL_L4,
 };
 
 static struct omap_hwmod_ocp_if omap3xxx_l4_core__es3plus_mmc2 = {
 	.master		= &omap3xxx_l4_core_hwmod,
 	.slave		= &omap3xxx_es3plus_mmc2_hwmod,
 	.clk		= "mmchs2_ick",
-	.addr		= omap2430_mmc2_addr_space,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-	.flags		= OMAP_FIREWALL_L4
+	.flags		= OMAP_FIREWALL_L4,
 };
 
 /* L4 CORE -> MMC3 interface */
-static struct omap_hwmod_addr_space omap3xxx_mmc3_addr_space[] = {
-	{
-		.pa_start	= 0x480ad000,
-		.pa_end		= 0x480ad1ff,
-		.flags		= ADDR_TYPE_RT,
-	},
-	{ }
-};
 
 static struct omap_hwmod_ocp_if omap3xxx_l4_core__mmc3 = {
 	.master		= &omap3xxx_l4_core_hwmod,
 	.slave		= &omap3xxx_mmc3_hwmod,
 	.clk		= "mmchs3_ick",
-	.addr		= omap3xxx_mmc3_addr_space,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-	.flags		= OMAP_FIREWALL_L4
+	.flags		= OMAP_FIREWALL_L4,
 };
 
 /* L4 CORE -> UART1 interface */
-static struct omap_hwmod_addr_space omap3xxx_uart1_addr_space[] = {
-	{
-		.pa_start	= OMAP3_UART1_BASE,
-		.pa_end		= OMAP3_UART1_BASE + SZ_8K - 1,
-		.flags		= ADDR_MAP_ON_INIT | ADDR_TYPE_RT,
-	},
-	{ }
-};
 
 static struct omap_hwmod_ocp_if omap3_l4_core__uart1 = {
 	.master		= &omap3xxx_l4_core_hwmod,
 	.slave		= &omap3xxx_uart1_hwmod,
 	.clk		= "uart1_ick",
-	.addr		= omap3xxx_uart1_addr_space,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
 /* L4 CORE -> UART2 interface */
-static struct omap_hwmod_addr_space omap3xxx_uart2_addr_space[] = {
-	{
-		.pa_start	= OMAP3_UART2_BASE,
-		.pa_end		= OMAP3_UART2_BASE + SZ_1K - 1,
-		.flags		= ADDR_MAP_ON_INIT | ADDR_TYPE_RT,
-	},
-	{ }
-};
 
 static struct omap_hwmod_ocp_if omap3_l4_core__uart2 = {
 	.master		= &omap3xxx_l4_core_hwmod,
 	.slave		= &omap3xxx_uart2_hwmod,
 	.clk		= "uart2_ick",
-	.addr		= omap3xxx_uart2_addr_space,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
 /* L4 PER -> UART3 interface */
-static struct omap_hwmod_addr_space omap3xxx_uart3_addr_space[] = {
-	{
-		.pa_start	= OMAP3_UART3_BASE,
-		.pa_end		= OMAP3_UART3_BASE + SZ_1K - 1,
-		.flags		= ADDR_MAP_ON_INIT | ADDR_TYPE_RT,
-	},
-	{ }
-};
 
 static struct omap_hwmod_ocp_if omap3_l4_per__uart3 = {
 	.master		= &omap3xxx_l4_per_hwmod,
 	.slave		= &omap3xxx_uart3_hwmod,
 	.clk		= "uart3_ick",
-	.addr		= omap3xxx_uart3_addr_space,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
 /* L4 PER -> UART4 interface */
-static struct omap_hwmod_addr_space omap36xx_uart4_addr_space[] = {
-	{
-		.pa_start	= OMAP3_UART4_BASE,
-		.pa_end		= OMAP3_UART4_BASE + SZ_1K - 1,
-		.flags		= ADDR_MAP_ON_INIT | ADDR_TYPE_RT,
-	},
-	{ }
-};
 
 static struct omap_hwmod_ocp_if omap36xx_l4_per__uart4 = {
 	.master		= &omap3xxx_l4_per_hwmod,
 	.slave		= &omap36xx_uart4_hwmod,
 	.clk		= "uart4_ick",
-	.addr		= omap36xx_uart4_addr_space,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
 /* AM35xx: L4 CORE -> UART4 interface */
-static struct omap_hwmod_addr_space am35xx_uart4_addr_space[] = {
-	{
-		.pa_start	= OMAP3_UART4_AM35XX_BASE,
-		.pa_end		= OMAP3_UART4_AM35XX_BASE + SZ_1K - 1,
-		.flags		= ADDR_MAP_ON_INIT | ADDR_TYPE_RT,
-	},
-	{ }
-};
 
 static struct omap_hwmod_ocp_if am35xx_l4_core__uart4 = {
 	.master		= &omap3xxx_l4_core_hwmod,
 	.slave		= &am35xx_uart4_hwmod,
 	.clk		= "uart4_ick",
-	.addr		= am35xx_uart4_addr_space,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
@@ -2403,13 +2070,12 @@ static struct omap_hwmod_ocp_if omap3_l4_core__i2c1 = {
 	.master		= &omap3xxx_l4_core_hwmod,
 	.slave		= &omap3xxx_i2c1_hwmod,
 	.clk		= "i2c1_ick",
-	.addr		= omap2_i2c1_addr_space,
 	.fw = {
 		.omap2 = {
 			.l4_fw_region  = OMAP3_L4_CORE_FW_I2C1_REGION,
 			.l4_prot_group = 7,
 			.flags	= OMAP_FIREWALL_L4,
-		}
+		},
 	},
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
@@ -2419,57 +2085,38 @@ static struct omap_hwmod_ocp_if omap3_l4_core__i2c2 = {
 	.master		= &omap3xxx_l4_core_hwmod,
 	.slave		= &omap3xxx_i2c2_hwmod,
 	.clk		= "i2c2_ick",
-	.addr		= omap2_i2c2_addr_space,
 	.fw = {
 		.omap2 = {
 			.l4_fw_region  = OMAP3_L4_CORE_FW_I2C2_REGION,
 			.l4_prot_group = 7,
 			.flags = OMAP_FIREWALL_L4,
-		}
+		},
 	},
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
 /* L4 CORE -> I2C3 interface */
-static struct omap_hwmod_addr_space omap3xxx_i2c3_addr_space[] = {
-	{
-		.pa_start	= 0x48060000,
-		.pa_end		= 0x48060000 + SZ_128 - 1,
-		.flags		= ADDR_TYPE_RT,
-	},
-	{ }
-};
 
 static struct omap_hwmod_ocp_if omap3_l4_core__i2c3 = {
 	.master		= &omap3xxx_l4_core_hwmod,
 	.slave		= &omap3xxx_i2c3_hwmod,
 	.clk		= "i2c3_ick",
-	.addr		= omap3xxx_i2c3_addr_space,
 	.fw = {
 		.omap2 = {
 			.l4_fw_region  = OMAP3_L4_CORE_FW_I2C3_REGION,
 			.l4_prot_group = 7,
 			.flags = OMAP_FIREWALL_L4,
-		}
+		},
 	},
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
 /* L4 CORE -> SR1 interface */
-static struct omap_hwmod_addr_space omap3_sr1_addr_space[] = {
-	{
-		.pa_start	= OMAP34XX_SR1_BASE,
-		.pa_end		= OMAP34XX_SR1_BASE + SZ_1K - 1,
-		.flags		= ADDR_TYPE_RT,
-	},
-	{ }
-};
 
 static struct omap_hwmod_ocp_if omap34xx_l4_core__sr1 = {
 	.master		= &omap3xxx_l4_core_hwmod,
 	.slave		= &omap34xx_sr1_hwmod,
 	.clk		= "sr_l4_ick",
-	.addr		= omap3_sr1_addr_space,
 	.user		= OCP_USER_MPU,
 };
 
@@ -2477,25 +2124,15 @@ static struct omap_hwmod_ocp_if omap36xx_l4_core__sr1 = {
 	.master		= &omap3xxx_l4_core_hwmod,
 	.slave		= &omap36xx_sr1_hwmod,
 	.clk		= "sr_l4_ick",
-	.addr		= omap3_sr1_addr_space,
 	.user		= OCP_USER_MPU,
 };
 
 /* L4 CORE -> SR1 interface */
-static struct omap_hwmod_addr_space omap3_sr2_addr_space[] = {
-	{
-		.pa_start	= OMAP34XX_SR2_BASE,
-		.pa_end		= OMAP34XX_SR2_BASE + SZ_1K - 1,
-		.flags		= ADDR_TYPE_RT,
-	},
-	{ }
-};
 
 static struct omap_hwmod_ocp_if omap34xx_l4_core__sr2 = {
 	.master		= &omap3xxx_l4_core_hwmod,
 	.slave		= &omap34xx_sr2_hwmod,
 	.clk		= "sr_l4_ick",
-	.addr		= omap3_sr2_addr_space,
 	.user		= OCP_USER_MPU,
 };
 
@@ -2503,43 +2140,24 @@ static struct omap_hwmod_ocp_if omap36xx_l4_core__sr2 = {
 	.master		= &omap3xxx_l4_core_hwmod,
 	.slave		= &omap36xx_sr2_hwmod,
 	.clk		= "sr_l4_ick",
-	.addr		= omap3_sr2_addr_space,
 	.user		= OCP_USER_MPU,
 };
 
-static struct omap_hwmod_addr_space omap3xxx_usbhsotg_addrs[] = {
-	{
-		.pa_start	= OMAP34XX_HSUSB_OTG_BASE,
-		.pa_end		= OMAP34XX_HSUSB_OTG_BASE + SZ_4K - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
 
 /* l4_core -> usbhsotg  */
 static struct omap_hwmod_ocp_if omap3xxx_l4_core__usbhsotg = {
 	.master		= &omap3xxx_l4_core_hwmod,
 	.slave		= &omap3xxx_usbhsotg_hwmod,
 	.clk		= "l4_ick",
-	.addr		= omap3xxx_usbhsotg_addrs,
 	.user		= OCP_USER_MPU,
 };
 
-static struct omap_hwmod_addr_space am35xx_usbhsotg_addrs[] = {
-	{
-		.pa_start	= AM35XX_IPSS_USBOTGSS_BASE,
-		.pa_end		= AM35XX_IPSS_USBOTGSS_BASE + SZ_4K - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
 
 /* l4_core -> usbhsotg  */
 static struct omap_hwmod_ocp_if am35xx_l4_core__usbhsotg = {
 	.master		= &omap3xxx_l4_core_hwmod,
 	.slave		= &am35xx_usbhsotg_hwmod,
 	.clk		= "hsotgusb_ick",
-	.addr		= am35xx_usbhsotg_addrs,
 	.user		= OCP_USER_MPU,
 };
 
@@ -2558,165 +2176,84 @@ static struct omap_hwmod_ocp_if omap3xxx_l3__iva = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-static struct omap_hwmod_addr_space omap3xxx_timer1_addrs[] = {
-	{
-		.pa_start	= 0x48318000,
-		.pa_end		= 0x48318000 + SZ_1K - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
 
 /* l4_wkup -> timer1 */
 static struct omap_hwmod_ocp_if omap3xxx_l4_wkup__timer1 = {
 	.master		= &omap3xxx_l4_wkup_hwmod,
 	.slave		= &omap3xxx_timer1_hwmod,
 	.clk		= "gpt1_ick",
-	.addr		= omap3xxx_timer1_addrs,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-static struct omap_hwmod_addr_space omap3xxx_timer2_addrs[] = {
-	{
-		.pa_start	= 0x49032000,
-		.pa_end		= 0x49032000 + SZ_1K - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
 
 /* l4_per -> timer2 */
 static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer2 = {
 	.master		= &omap3xxx_l4_per_hwmod,
 	.slave		= &omap3xxx_timer2_hwmod,
 	.clk		= "gpt2_ick",
-	.addr		= omap3xxx_timer2_addrs,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-static struct omap_hwmod_addr_space omap3xxx_timer3_addrs[] = {
-	{
-		.pa_start	= 0x49034000,
-		.pa_end		= 0x49034000 + SZ_1K - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
 
 /* l4_per -> timer3 */
 static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer3 = {
 	.master		= &omap3xxx_l4_per_hwmod,
 	.slave		= &omap3xxx_timer3_hwmod,
 	.clk		= "gpt3_ick",
-	.addr		= omap3xxx_timer3_addrs,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-static struct omap_hwmod_addr_space omap3xxx_timer4_addrs[] = {
-	{
-		.pa_start	= 0x49036000,
-		.pa_end		= 0x49036000 + SZ_1K - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
 
 /* l4_per -> timer4 */
 static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer4 = {
 	.master		= &omap3xxx_l4_per_hwmod,
 	.slave		= &omap3xxx_timer4_hwmod,
 	.clk		= "gpt4_ick",
-	.addr		= omap3xxx_timer4_addrs,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-static struct omap_hwmod_addr_space omap3xxx_timer5_addrs[] = {
-	{
-		.pa_start	= 0x49038000,
-		.pa_end		= 0x49038000 + SZ_1K - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
 
 /* l4_per -> timer5 */
 static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer5 = {
 	.master		= &omap3xxx_l4_per_hwmod,
 	.slave		= &omap3xxx_timer5_hwmod,
 	.clk		= "gpt5_ick",
-	.addr		= omap3xxx_timer5_addrs,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-static struct omap_hwmod_addr_space omap3xxx_timer6_addrs[] = {
-	{
-		.pa_start	= 0x4903A000,
-		.pa_end		= 0x4903A000 + SZ_1K - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
 
 /* l4_per -> timer6 */
 static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer6 = {
 	.master		= &omap3xxx_l4_per_hwmod,
 	.slave		= &omap3xxx_timer6_hwmod,
 	.clk		= "gpt6_ick",
-	.addr		= omap3xxx_timer6_addrs,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-static struct omap_hwmod_addr_space omap3xxx_timer7_addrs[] = {
-	{
-		.pa_start	= 0x4903C000,
-		.pa_end		= 0x4903C000 + SZ_1K - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
 
 /* l4_per -> timer7 */
 static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer7 = {
 	.master		= &omap3xxx_l4_per_hwmod,
 	.slave		= &omap3xxx_timer7_hwmod,
 	.clk		= "gpt7_ick",
-	.addr		= omap3xxx_timer7_addrs,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-static struct omap_hwmod_addr_space omap3xxx_timer8_addrs[] = {
-	{
-		.pa_start	= 0x4903E000,
-		.pa_end		= 0x4903E000 + SZ_1K - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
 
 /* l4_per -> timer8 */
 static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer8 = {
 	.master		= &omap3xxx_l4_per_hwmod,
 	.slave		= &omap3xxx_timer8_hwmod,
 	.clk		= "gpt8_ick",
-	.addr		= omap3xxx_timer8_addrs,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-static struct omap_hwmod_addr_space omap3xxx_timer9_addrs[] = {
-	{
-		.pa_start	= 0x49040000,
-		.pa_end		= 0x49040000 + SZ_1K - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
 
 /* l4_per -> timer9 */
 static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer9 = {
 	.master		= &omap3xxx_l4_per_hwmod,
 	.slave		= &omap3xxx_timer9_hwmod,
 	.clk		= "gpt9_ick",
-	.addr		= omap3xxx_timer9_addrs,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
@@ -2725,7 +2262,6 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__timer10 = {
 	.master		= &omap3xxx_l4_core_hwmod,
 	.slave		= &omap3xxx_timer10_hwmod,
 	.clk		= "gpt10_ick",
-	.addr		= omap2_timer10_addrs,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
@@ -2734,43 +2270,24 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__timer11 = {
 	.master		= &omap3xxx_l4_core_hwmod,
 	.slave		= &omap3xxx_timer11_hwmod,
 	.clk		= "gpt11_ick",
-	.addr		= omap2_timer11_addrs,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-static struct omap_hwmod_addr_space omap3xxx_timer12_addrs[] = {
-	{
-		.pa_start	= 0x48304000,
-		.pa_end		= 0x48304000 + SZ_1K - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
 
 /* l4_core -> timer12 */
 static struct omap_hwmod_ocp_if omap3xxx_l4_sec__timer12 = {
 	.master		= &omap3xxx_l4_sec_hwmod,
 	.slave		= &omap3xxx_timer12_hwmod,
 	.clk		= "gpt12_ick",
-	.addr		= omap3xxx_timer12_addrs,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
 /* l4_wkup -> wd_timer2 */
-static struct omap_hwmod_addr_space omap3xxx_wd_timer2_addrs[] = {
-	{
-		.pa_start	= 0x48314000,
-		.pa_end		= 0x4831407f,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
 
 static struct omap_hwmod_ocp_if omap3xxx_l4_wkup__wd_timer2 = {
 	.master		= &omap3xxx_l4_wkup_hwmod,
 	.slave		= &omap3xxx_wd_timer2_hwmod,
 	.clk		= "wdt2_ick",
-	.addr		= omap3xxx_wd_timer2_addrs,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
@@ -2779,13 +2296,12 @@ static struct omap_hwmod_ocp_if omap3430es1_l4_core__dss = {
 	.master		= &omap3xxx_l4_core_hwmod,
 	.slave		= &omap3430es1_dss_core_hwmod,
 	.clk		= "dss_ick",
-	.addr		= omap2_dss_addrs,
 	.fw = {
 		.omap2 = {
 			.l4_fw_region  = OMAP3ES1_L4_CORE_FW_DSS_CORE_REGION,
 			.l4_prot_group = OMAP3_L4_CORE_FW_DSS_PROT_GROUP,
 			.flags	= OMAP_FIREWALL_L4,
-		}
+		},
 	},
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
@@ -2794,13 +2310,12 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss = {
 	.master		= &omap3xxx_l4_core_hwmod,
 	.slave		= &omap3xxx_dss_core_hwmod,
 	.clk		= "dss_ick",
-	.addr		= omap2_dss_addrs,
 	.fw = {
 		.omap2 = {
 			.l4_fw_region  = OMAP3_L4_CORE_FW_DSS_CORE_REGION,
 			.l4_prot_group = OMAP3_L4_CORE_FW_DSS_PROT_GROUP,
 			.flags	= OMAP_FIREWALL_L4,
-		}
+		},
 	},
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
@@ -2810,38 +2325,27 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_dispc = {
 	.master		= &omap3xxx_l4_core_hwmod,
 	.slave		= &omap3xxx_dss_dispc_hwmod,
 	.clk		= "dss_ick",
-	.addr		= omap2_dss_dispc_addrs,
 	.fw = {
 		.omap2 = {
 			.l4_fw_region  = OMAP3_L4_CORE_FW_DSS_DISPC_REGION,
 			.l4_prot_group = OMAP3_L4_CORE_FW_DSS_PROT_GROUP,
 			.flags	= OMAP_FIREWALL_L4,
-		}
+		},
 	},
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-static struct omap_hwmod_addr_space omap3xxx_dss_dsi1_addrs[] = {
-	{
-		.pa_start	= 0x4804FC00,
-		.pa_end		= 0x4804FFFF,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
 /* l4_core -> dss_dsi1 */
 static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_dsi1 = {
 	.master		= &omap3xxx_l4_core_hwmod,
 	.slave		= &omap3xxx_dss_dsi1_hwmod,
 	.clk		= "dss_ick",
-	.addr		= omap3xxx_dss_dsi1_addrs,
 	.fw = {
 		.omap2 = {
 			.l4_fw_region  = OMAP3_L4_CORE_FW_DSS_DSI_REGION,
 			.l4_prot_group = OMAP3_L4_CORE_FW_DSS_PROT_GROUP,
 			.flags	= OMAP_FIREWALL_L4,
-		}
+		},
 	},
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
@@ -2851,13 +2355,12 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_rfbi = {
 	.master		= &omap3xxx_l4_core_hwmod,
 	.slave		= &omap3xxx_dss_rfbi_hwmod,
 	.clk		= "dss_ick",
-	.addr		= omap2_dss_rfbi_addrs,
 	.fw = {
 		.omap2 = {
 			.l4_fw_region  = OMAP3_L4_CORE_FW_DSS_RFBI_REGION,
 			.l4_prot_group = OMAP3_L4_CORE_FW_DSS_PROT_GROUP ,
 			.flags	= OMAP_FIREWALL_L4,
-		}
+		},
 	},
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
@@ -2867,66 +2370,38 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_venc = {
 	.master		= &omap3xxx_l4_core_hwmod,
 	.slave		= &omap3xxx_dss_venc_hwmod,
 	.clk		= "dss_ick",
-	.addr		= omap2_dss_venc_addrs,
 	.fw = {
 		.omap2 = {
 			.l4_fw_region  = OMAP3_L4_CORE_FW_DSS_VENC_REGION,
 			.l4_prot_group = OMAP3_L4_CORE_FW_DSS_PROT_GROUP,
 			.flags	= OMAP_FIREWALL_L4,
-		}
+		},
 	},
 	.flags		= OCPIF_SWSUP_IDLE,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
 /* l4_wkup -> gpio1 */
-static struct omap_hwmod_addr_space omap3xxx_gpio1_addrs[] = {
-	{
-		.pa_start	= 0x48310000,
-		.pa_end		= 0x483101ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
 
 static struct omap_hwmod_ocp_if omap3xxx_l4_wkup__gpio1 = {
 	.master		= &omap3xxx_l4_wkup_hwmod,
 	.slave		= &omap3xxx_gpio1_hwmod,
-	.addr		= omap3xxx_gpio1_addrs,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
 /* l4_per -> gpio2 */
-static struct omap_hwmod_addr_space omap3xxx_gpio2_addrs[] = {
-	{
-		.pa_start	= 0x49050000,
-		.pa_end		= 0x490501ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
 
 static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio2 = {
 	.master		= &omap3xxx_l4_per_hwmod,
 	.slave		= &omap3xxx_gpio2_hwmod,
-	.addr		= omap3xxx_gpio2_addrs,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
 /* l4_per -> gpio3 */
-static struct omap_hwmod_addr_space omap3xxx_gpio3_addrs[] = {
-	{
-		.pa_start	= 0x49052000,
-		.pa_end		= 0x490521ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
 
 static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio3 = {
 	.master		= &omap3xxx_l4_per_hwmod,
 	.slave		= &omap3xxx_gpio3_hwmod,
-	.addr		= omap3xxx_gpio3_addrs,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
@@ -3002,53 +2477,26 @@ static struct omap_hwmod omap3xxx_mmu_iva_hwmod = {
 };
 
 /* l4_per -> gpio4 */
-static struct omap_hwmod_addr_space omap3xxx_gpio4_addrs[] = {
-	{
-		.pa_start	= 0x49054000,
-		.pa_end		= 0x490541ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
 
 static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio4 = {
 	.master		= &omap3xxx_l4_per_hwmod,
 	.slave		= &omap3xxx_gpio4_hwmod,
-	.addr		= omap3xxx_gpio4_addrs,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
 /* l4_per -> gpio5 */
-static struct omap_hwmod_addr_space omap3xxx_gpio5_addrs[] = {
-	{
-		.pa_start	= 0x49056000,
-		.pa_end		= 0x490561ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
 
 static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio5 = {
 	.master		= &omap3xxx_l4_per_hwmod,
 	.slave		= &omap3xxx_gpio5_hwmod,
-	.addr		= omap3xxx_gpio5_addrs,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
 /* l4_per -> gpio6 */
-static struct omap_hwmod_addr_space omap3xxx_gpio6_addrs[] = {
-	{
-		.pa_start	= 0x49058000,
-		.pa_end		= 0x490581ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
 
 static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio6 = {
 	.master		= &omap3xxx_l4_per_hwmod,
 	.slave		= &omap3xxx_gpio6_hwmod,
-	.addr		= omap3xxx_gpio6_addrs,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
@@ -3064,9 +2512,9 @@ static struct omap_hwmod_addr_space omap3xxx_dma_system_addrs[] = {
 	{
 		.pa_start	= 0x48056000,
 		.pa_end		= 0x48056fff,
-		.flags		= ADDR_TYPE_RT
+		.flags		= ADDR_TYPE_RT,
 	},
-	{ }
+	{ },
 };
 
 /* l4_cfg -> dma_system */
@@ -3078,136 +2526,66 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__dma_system = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-static struct omap_hwmod_addr_space omap3xxx_mcbsp1_addrs[] = {
-	{
-		.name		= "mpu",
-		.pa_start	= 0x48074000,
-		.pa_end		= 0x480740ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
 
 /* l4_core -> mcbsp1 */
 static struct omap_hwmod_ocp_if omap3xxx_l4_core__mcbsp1 = {
 	.master		= &omap3xxx_l4_core_hwmod,
 	.slave		= &omap3xxx_mcbsp1_hwmod,
 	.clk		= "mcbsp1_ick",
-	.addr		= omap3xxx_mcbsp1_addrs,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-static struct omap_hwmod_addr_space omap3xxx_mcbsp2_addrs[] = {
-	{
-		.name		= "mpu",
-		.pa_start	= 0x49022000,
-		.pa_end		= 0x490220ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
 
 /* l4_per -> mcbsp2 */
 static struct omap_hwmod_ocp_if omap3xxx_l4_per__mcbsp2 = {
 	.master		= &omap3xxx_l4_per_hwmod,
 	.slave		= &omap3xxx_mcbsp2_hwmod,
 	.clk		= "mcbsp2_ick",
-	.addr		= omap3xxx_mcbsp2_addrs,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-static struct omap_hwmod_addr_space omap3xxx_mcbsp3_addrs[] = {
-	{
-		.name		= "mpu",
-		.pa_start	= 0x49024000,
-		.pa_end		= 0x490240ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
 
 /* l4_per -> mcbsp3 */
 static struct omap_hwmod_ocp_if omap3xxx_l4_per__mcbsp3 = {
 	.master		= &omap3xxx_l4_per_hwmod,
 	.slave		= &omap3xxx_mcbsp3_hwmod,
 	.clk		= "mcbsp3_ick",
-	.addr		= omap3xxx_mcbsp3_addrs,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-static struct omap_hwmod_addr_space omap3xxx_mcbsp4_addrs[] = {
-	{
-		.name		= "mpu",
-		.pa_start	= 0x49026000,
-		.pa_end		= 0x490260ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
 
 /* l4_per -> mcbsp4 */
 static struct omap_hwmod_ocp_if omap3xxx_l4_per__mcbsp4 = {
 	.master		= &omap3xxx_l4_per_hwmod,
 	.slave		= &omap3xxx_mcbsp4_hwmod,
 	.clk		= "mcbsp4_ick",
-	.addr		= omap3xxx_mcbsp4_addrs,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-static struct omap_hwmod_addr_space omap3xxx_mcbsp5_addrs[] = {
-	{
-		.name		= "mpu",
-		.pa_start	= 0x48096000,
-		.pa_end		= 0x480960ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
 
 /* l4_core -> mcbsp5 */
 static struct omap_hwmod_ocp_if omap3xxx_l4_core__mcbsp5 = {
 	.master		= &omap3xxx_l4_core_hwmod,
 	.slave		= &omap3xxx_mcbsp5_hwmod,
 	.clk		= "mcbsp5_ick",
-	.addr		= omap3xxx_mcbsp5_addrs,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-static struct omap_hwmod_addr_space omap3xxx_mcbsp2_sidetone_addrs[] = {
-	{
-		.name		= "sidetone",
-		.pa_start	= 0x49028000,
-		.pa_end		= 0x490280ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
 
 /* l4_per -> mcbsp2_sidetone */
 static struct omap_hwmod_ocp_if omap3xxx_l4_per__mcbsp2_sidetone = {
 	.master		= &omap3xxx_l4_per_hwmod,
 	.slave		= &omap3xxx_mcbsp2_sidetone_hwmod,
 	.clk		= "mcbsp2_ick",
-	.addr		= omap3xxx_mcbsp2_sidetone_addrs,
 	.user		= OCP_USER_MPU,
 };
 
-static struct omap_hwmod_addr_space omap3xxx_mcbsp3_sidetone_addrs[] = {
-	{
-		.name		= "sidetone",
-		.pa_start	= 0x4902A000,
-		.pa_end		= 0x4902A0ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
 
 /* l4_per -> mcbsp3_sidetone */
 static struct omap_hwmod_ocp_if omap3xxx_l4_per__mcbsp3_sidetone = {
 	.master		= &omap3xxx_l4_per_hwmod,
 	.slave		= &omap3xxx_mcbsp3_sidetone_hwmod,
 	.clk		= "mcbsp3_ick",
-	.addr		= omap3xxx_mcbsp3_sidetone_addrs,
 	.user		= OCP_USER_MPU,
 };
 
@@ -3223,7 +2601,6 @@ static struct omap_hwmod_ocp_if omap34xx_l4_core__mcspi1 = {
 	.master		= &omap3xxx_l4_core_hwmod,
 	.slave		= &omap34xx_mcspi1,
 	.clk		= "mcspi1_ick",
-	.addr		= omap2_mcspi1_addr_space,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
@@ -3232,7 +2609,6 @@ static struct omap_hwmod_ocp_if omap34xx_l4_core__mcspi2 = {
 	.master		= &omap3xxx_l4_core_hwmod,
 	.slave		= &omap34xx_mcspi2,
 	.clk		= "mcspi2_ick",
-	.addr		= omap2_mcspi2_addr_space,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
@@ -3241,25 +2617,15 @@ static struct omap_hwmod_ocp_if omap34xx_l4_core__mcspi3 = {
 	.master		= &omap3xxx_l4_core_hwmod,
 	.slave		= &omap34xx_mcspi3,
 	.clk		= "mcspi3_ick",
-	.addr		= omap2430_mcspi3_addr_space,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
 /* l4 core -> mcspi4 interface */
-static struct omap_hwmod_addr_space omap34xx_mcspi4_addr_space[] = {
-	{
-		.pa_start	= 0x480ba000,
-		.pa_end		= 0x480ba0ff,
-		.flags		= ADDR_TYPE_RT,
-	},
-	{ }
-};
 
 static struct omap_hwmod_ocp_if omap34xx_l4_core__mcspi4 = {
 	.master		= &omap3xxx_l4_core_hwmod,
 	.slave		= &omap34xx_mcspi4,
 	.clk		= "mcspi4_ick",
-	.addr		= omap34xx_mcspi4_addr_space,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
@@ -3270,49 +2636,19 @@ static struct omap_hwmod_ocp_if omap3xxx_usb_host_hs__l3_main_2 = {
 	.user		= OCP_USER_MPU,
 };
 
-static struct omap_hwmod_addr_space omap3xxx_usb_host_hs_addrs[] = {
-	{
-		.name		= "uhh",
-		.pa_start	= 0x48064000,
-		.pa_end		= 0x480643ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{
-		.name		= "ohci",
-		.pa_start	= 0x48064400,
-		.pa_end		= 0x480647ff,
-	},
-	{
-		.name		= "ehci",
-		.pa_start	= 0x48064800,
-		.pa_end		= 0x48064cff,
-	},
-	{}
-};
 
 static struct omap_hwmod_ocp_if omap3xxx_l4_core__usb_host_hs = {
 	.master		= &omap3xxx_l4_core_hwmod,
 	.slave		= &omap3xxx_usb_host_hs_hwmod,
 	.clk		= "usbhost_ick",
-	.addr		= omap3xxx_usb_host_hs_addrs,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-static struct omap_hwmod_addr_space omap3xxx_usb_tll_hs_addrs[] = {
-	{
-		.name		= "tll",
-		.pa_start	= 0x48062000,
-		.pa_end		= 0x48062fff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{}
-};
 
 static struct omap_hwmod_ocp_if omap3xxx_l4_core__usb_tll_hs = {
 	.master		= &omap3xxx_l4_core_hwmod,
 	.slave		= &omap3xxx_usb_tll_hs_hwmod,
 	.clk		= "usbtll_ick",
-	.addr		= omap3xxx_usb_tll_hs_addrs,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
@@ -3321,35 +2657,17 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__hdq1w = {
 	.master		= &omap3xxx_l4_core_hwmod,
 	.slave		= &omap3xxx_hdq1w_hwmod,
 	.clk		= "hdq_ick",
-	.addr		= omap2_hdq1w_addr_space,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 	.flags		= OMAP_FIREWALL_L4 | OCPIF_SWSUP_IDLE,
 };
 
 /* l4_wkup -> 32ksync_counter */
-static struct omap_hwmod_addr_space omap3xxx_counter_32k_addrs[] = {
-	{
-		.pa_start	= 0x48320000,
-		.pa_end		= 0x4832001f,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
 
-static struct omap_hwmod_addr_space omap3xxx_gpmc_addrs[] = {
-	{
-		.pa_start	= 0x6e000000,
-		.pa_end		= 0x6e000fff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
 
 static struct omap_hwmod_ocp_if omap3xxx_l4_wkup__counter_32k = {
 	.master		= &omap3xxx_l4_wkup_hwmod,
 	.slave		= &omap3xxx_counter_32k_hwmod,
 	.clk		= "omap_32ksync_ick",
-	.addr		= omap3xxx_counter_32k_addrs,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
@@ -3434,7 +2752,6 @@ static struct omap_hwmod_ocp_if omap3xxx_l3_main__gpmc = {
 	.master		= &omap3xxx_l3_main_hwmod,
 	.slave		= &omap3xxx_gpmc_hwmod,
 	.clk		= "core_l3_ick",
-	.addr		= omap3xxx_gpmc_addrs,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
@@ -3459,20 +2776,10 @@ static struct omap_hwmod_class omap3xxx_sham_class = {
 	.sysc	= &omap3_sham_sysc,
 };
 
-static struct omap_hwmod_irq_info omap3_sham_mpu_irqs[] = {
-	{ .irq = 49 + OMAP_INTC_START, },
-	{ .irq = -1 }
-};
 
-static struct omap_hwmod_dma_info omap3_sham_sdma_reqs[] = {
-	{ .name = "rx", .dma_req = 69, },
-	{ .dma_req = -1 }
-};
 
 static struct omap_hwmod omap3xxx_sham_hwmod = {
 	.name		= "sham",
-	.mpu_irqs	= omap3_sham_mpu_irqs,
-	.sdma_reqs	= omap3_sham_sdma_reqs,
 	.main_clk	= "sha12_ick",
 	.prcm		= {
 		.omap2 = {
@@ -3486,20 +2793,11 @@ static struct omap_hwmod omap3xxx_sham_hwmod = {
 	.class		= &omap3xxx_sham_class,
 };
 
-static struct omap_hwmod_addr_space omap3xxx_sham_addrs[] = {
-	{
-		.pa_start	= 0x480c3000,
-		.pa_end		= 0x480c3000 + 0x64 - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
 
 static struct omap_hwmod_ocp_if omap3xxx_l4_core__sham = {
 	.master		= &omap3xxx_l4_core_hwmod,
 	.slave		= &omap3xxx_sham_hwmod,
 	.clk		= "sha12_ick",
-	.addr		= omap3xxx_sham_addrs,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
@@ -3525,15 +2823,9 @@ static struct omap_hwmod_class omap3xxx_aes_class = {
 	.sysc	= &omap3_aes_sysc,
 };
 
-static struct omap_hwmod_dma_info omap3_aes_sdma_reqs[] = {
-	{ .name = "tx", .dma_req = 65, },
-	{ .name = "rx", .dma_req = 66, },
-	{ .dma_req = -1 }
-};
 
 static struct omap_hwmod omap3xxx_aes_hwmod = {
 	.name		= "aes",
-	.sdma_reqs	= omap3_aes_sdma_reqs,
 	.main_clk	= "aes2_ick",
 	.prcm		= {
 		.omap2 = {
@@ -3547,20 +2839,11 @@ static struct omap_hwmod omap3xxx_aes_hwmod = {
 	.class		= &omap3xxx_aes_class,
 };
 
-static struct omap_hwmod_addr_space omap3xxx_aes_addrs[] = {
-	{
-		.pa_start	= 0x480c5000,
-		.pa_end		= 0x480c5000 + 0x50 - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
 
 static struct omap_hwmod_ocp_if omap3xxx_l4_core__aes = {
 	.master		= &omap3xxx_l4_core_hwmod,
 	.slave		= &omap3xxx_aes_hwmod,
 	.clk		= "aes2_ick",
-	.addr		= omap3xxx_aes_addrs,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
@@ -3661,28 +2944,28 @@ static struct omap_hwmod_ocp_if *omap3xxx_hwmod_ocp_ifs[] __initdata = {
 /* GP-only hwmod links */
 static struct omap_hwmod_ocp_if *omap34xx_gp_hwmod_ocp_ifs[] __initdata = {
 	&omap3xxx_l4_sec__timer12,
-	NULL
+	NULL,
 };
 
 static struct omap_hwmod_ocp_if *omap36xx_gp_hwmod_ocp_ifs[] __initdata = {
 	&omap3xxx_l4_sec__timer12,
-	NULL
+	NULL,
 };
 
 static struct omap_hwmod_ocp_if *am35xx_gp_hwmod_ocp_ifs[] __initdata = {
 	&omap3xxx_l4_sec__timer12,
-	NULL
+	NULL,
 };
 
 /* crypto hwmod links */
 static struct omap_hwmod_ocp_if *omap34xx_sham_hwmod_ocp_ifs[] __initdata = {
 	&omap3xxx_l4_core__sham,
-	NULL
+	NULL,
 };
 
 static struct omap_hwmod_ocp_if *omap34xx_aes_hwmod_ocp_ifs[] __initdata = {
 	&omap3xxx_l4_core__aes,
-	NULL
+	NULL,
 };
 
 static struct omap_hwmod_ocp_if *omap36xx_sham_hwmod_ocp_ifs[] __initdata = {
@@ -3710,14 +2993,14 @@ static struct omap_hwmod_ocp_if *am35xx_sham_hwmod_ocp_ifs[] __initdata = {
 
 static struct omap_hwmod_ocp_if *am35xx_aes_hwmod_ocp_ifs[] __initdata = {
 	/* &omap3xxx_l4_core__aes, */
-	NULL
+	NULL,
 };
 
 /* 3430ES1-only hwmod links */
 static struct omap_hwmod_ocp_if *omap3430es1_hwmod_ocp_ifs[] __initdata = {
 	&omap3430es1_dss__l3,
 	&omap3430es1_l4_core__dss,
-	NULL
+	NULL,
 };
 
 /* 3430ES2+-only hwmod links */
@@ -3729,21 +3012,21 @@ static struct omap_hwmod_ocp_if *omap3430es2plus_hwmod_ocp_ifs[] __initdata = {
 	&omap3xxx_usb_host_hs__l3_main_2,
 	&omap3xxx_l4_core__usb_host_hs,
 	&omap3xxx_l4_core__usb_tll_hs,
-	NULL
+	NULL,
 };
 
 /* <= 3430ES3-only hwmod links */
 static struct omap_hwmod_ocp_if *omap3430_pre_es3_hwmod_ocp_ifs[] __initdata = {
 	&omap3xxx_l4_core__pre_es3_mmc1,
 	&omap3xxx_l4_core__pre_es3_mmc2,
-	NULL
+	NULL,
 };
 
 /* 3430ES3+-only hwmod links */
 static struct omap_hwmod_ocp_if *omap3430_es3plus_hwmod_ocp_ifs[] __initdata = {
 	&omap3xxx_l4_core__es3plus_mmc1,
 	&omap3xxx_l4_core__es3plus_mmc2,
-	NULL
+	NULL,
 };
 
 /* 34xx-only hwmod links (all ES revisions) */
@@ -3757,7 +3040,7 @@ static struct omap_hwmod_ocp_if *omap34xx_hwmod_ocp_ifs[] __initdata = {
 	&omap3xxx_l4_core__mmu_isp,
 	&omap3xxx_l3_main__mmu_iva,
 	&omap3xxx_l4_core__ssi,
-	NULL
+	NULL,
 };
 
 /* 36xx-only hwmod links (all ES revisions) */
@@ -3781,7 +3064,7 @@ static struct omap_hwmod_ocp_if *omap36xx_hwmod_ocp_ifs[] __initdata = {
 	&omap3xxx_l4_core__mmu_isp,
 	&omap3xxx_l3_main__mmu_iva,
 	&omap3xxx_l4_core__ssi,
-	NULL
+	NULL,
 };
 
 static struct omap_hwmod_ocp_if *am35xx_hwmod_ocp_ifs[] __initdata = {
@@ -3800,7 +3083,7 @@ static struct omap_hwmod_ocp_if *am35xx_hwmod_ocp_ifs[] __initdata = {
 	&am35xx_l4_core__mdio,
 	&am35xx_emac__l3,
 	&am35xx_l4_core__emac,
-	NULL
+	NULL,
 };
 
 static struct omap_hwmod_ocp_if *omap3xxx_dss_hwmod_ocp_ifs[] __initdata = {
@@ -3808,7 +3091,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_hwmod_ocp_ifs[] __initdata = {
 	&omap3xxx_l4_core__dss_dsi1,
 	&omap3xxx_l4_core__dss_rfbi,
 	&omap3xxx_l4_core__dss_venc,
-	NULL
+	NULL,
 };
 
 /**

arch/arm/mach-omap2/omap_hwmod_43xx_data.c

@@ -442,6 +442,31 @@ static struct omap_hwmod am43xx_adc_tsc_hwmod = {
 	},
 };
 
+static struct omap_hwmod_class_sysconfig am43xx_des_sysc = {
+	.rev_offs	= 0x30,
+	.sysc_offs	= 0x34,
+	.syss_offs	= 0x38,
+	.sysc_flags	= SYSS_HAS_RESET_STATUS,
+};
+
+static struct omap_hwmod_class am43xx_des_hwmod_class = {
+	.name		= "des",
+	.sysc		= &am43xx_des_sysc,
+};
+
+static struct omap_hwmod am43xx_des_hwmod = {
+	.name		= "des",
+	.class		= &am43xx_des_hwmod_class,
+	.clkdm_name	= "l3_clkdm",
+	.main_clk	= "l3_gclk",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM43XX_CM_PER_DES_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
 /* dss */
 
 static struct omap_hwmod am43xx_dss_core_hwmod = {
@@ -870,6 +895,13 @@ static struct omap_hwmod_ocp_if am43xx_l4_ls__vpfe1 = {
 	.user           = OCP_USER_MPU | OCP_USER_SDMA,
 };
 
+static struct omap_hwmod_ocp_if am43xx_l3_main__des = {
+	.master		= &am33xx_l3_main_hwmod,
+	.slave		= &am43xx_des_hwmod,
+	.clk		= "l3_gclk",
+	.user		= OCP_USER_MPU,
+};
+
 static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
 	&am33xx_l4_wkup__synctimer,
 	&am43xx_l4_ls__timer8,
@@ -917,6 +949,7 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
 	&am33xx_l4_per__i2c2,
 	&am33xx_l4_per__i2c3,
 	&am33xx_l4_per__mailbox,
+	&am33xx_l4_per__rng,
 	&am33xx_l4_ls__mcasp0,
 	&am33xx_l4_ls__mcasp1,
 	&am33xx_l4_ls__mmc0,
@@ -950,6 +983,7 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
 	&am33xx_cpgmac0__mdio,
 	&am33xx_l3_main__sha0,
 	&am33xx_l3_main__aes0,
+	&am43xx_l3_main__des,
 	&am43xx_l4_ls__ocp2scp0,
 	&am43xx_l4_ls__ocp2scp1,
 	&am43xx_l3_s__usbotgss0,

arch/arm/mach-omap2/omap_hwmod_7xx_data.c

@@ -690,6 +690,78 @@ static struct omap_hwmod dra7xx_dss_hdmi_hwmod = {
 	.parent_hwmod	= &dra7xx_dss_hwmod,
 };
 
+/* AES (the 'P' (public) device) */
+static struct omap_hwmod_class_sysconfig dra7xx_aes_sysc = {
+	.rev_offs	= 0x0080,
+	.sysc_offs	= 0x0084,
+	.syss_offs	= 0x0088,
+	.sysc_flags	= SYSS_HAS_RESET_STATUS,
+};
+
+static struct omap_hwmod_class dra7xx_aes_hwmod_class = {
+	.name	= "aes",
+	.sysc	= &dra7xx_aes_sysc,
+	.rev	= 2,
+};
+
+/* AES1 */
+static struct omap_hwmod dra7xx_aes1_hwmod = {
+	.name		= "aes1",
+	.class		= &dra7xx_aes_hwmod_class,
+	.clkdm_name	= "l4sec_clkdm",
+	.main_clk	= "l3_iclk_div",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4SEC_AES1_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4SEC_AES1_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_HWCTRL,
+		},
+	},
+};
+
+/* AES2 */
+static struct omap_hwmod dra7xx_aes2_hwmod = {
+	.name		= "aes2",
+	.class		= &dra7xx_aes_hwmod_class,
+	.clkdm_name	= "l4sec_clkdm",
+	.main_clk	= "l3_iclk_div",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4SEC_AES2_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4SEC_AES2_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_HWCTRL,
+		},
+	},
+};
+
+/* sha0 HIB2 (the 'P' (public) device) */
+static struct omap_hwmod_class_sysconfig dra7xx_sha0_sysc = {
+	.rev_offs	= 0x100,
+	.sysc_offs	= 0x110,
+	.syss_offs	= 0x114,
+	.sysc_flags	= SYSS_HAS_RESET_STATUS,
+};
+
+static struct omap_hwmod_class dra7xx_sha0_hwmod_class = {
+	.name		= "sham",
+	.sysc		= &dra7xx_sha0_sysc,
+	.rev		= 2,
+};
+
+struct omap_hwmod dra7xx_sha0_hwmod = {
+	.name		= "sham",
+	.class		= &dra7xx_sha0_hwmod_class,
+	.clkdm_name	= "l4sec_clkdm",
+	.main_clk	= "l3_iclk_div",
+	.prcm		= {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4SEC_SHA2MD51_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4SEC_SHA2MD51_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_HWCTRL,
+		},
+	},
+};
+
 /*
  * 'elm' class
  *
@@ -2541,6 +2613,62 @@ static struct omap_hwmod dra7xx_uart10_hwmod = {
 	},
 };
 
+/* DES (the 'P' (public) device) */
+static struct omap_hwmod_class_sysconfig dra7xx_des_sysc = {
+	.rev_offs	= 0x0030,
+	.sysc_offs	= 0x0034,
+	.syss_offs	= 0x0038,
+	.sysc_flags	= SYSS_HAS_RESET_STATUS,
+};
+
+static struct omap_hwmod_class dra7xx_des_hwmod_class = {
+	.name	= "des",
+	.sysc	= &dra7xx_des_sysc,
+};
+
+/* DES */
+static struct omap_hwmod dra7xx_des_hwmod = {
+	.name		= "des",
+	.class		= &dra7xx_des_hwmod_class,
+	.clkdm_name	= "l4sec_clkdm",
+	.main_clk	= "l3_iclk_div",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4SEC_DES3DES_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4SEC_DES3DES_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_HWCTRL,
+		},
+	},
+};
+
+/* rng */
+static struct omap_hwmod_class_sysconfig dra7xx_rng_sysc = {
+	.rev_offs       = 0x1fe0,
+	.sysc_offs      = 0x1fe4,
+	.sysc_flags     = SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE,
+	.idlemodes      = SIDLE_FORCE | SIDLE_NO,
+	.sysc_fields    = &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class dra7xx_rng_hwmod_class = {
+	.name           = "rng",
+	.sysc           = &dra7xx_rng_sysc,
+};
+
+static struct omap_hwmod dra7xx_rng_hwmod = {
+	.name           = "rng",
+	.class          = &dra7xx_rng_hwmod_class,
+	.flags		= HWMOD_SWSUP_SIDLE,
+	.clkdm_name     = "l4sec_clkdm",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4SEC_RNG_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4SEC_RNG_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_HWCTRL,
+		},
+	},
+};
+
 /*
  * 'usb_otg_ss' class
  *
@@ -2929,6 +3057,30 @@ static struct omap_hwmod_ocp_if dra7xx_l3_main_1__hdmi = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
+/* l3_main_1 -> aes1 */
+static struct omap_hwmod_ocp_if dra7xx_l3_main_1__aes1 = {
+	.master		= &dra7xx_l3_main_1_hwmod,
+	.slave		= &dra7xx_aes1_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3_main_1 -> aes2 */
+static struct omap_hwmod_ocp_if dra7xx_l3_main_1__aes2 = {
+	.master		= &dra7xx_l3_main_1_hwmod,
+	.slave		= &dra7xx_aes2_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3_main_1 -> sha0 */
+static struct omap_hwmod_ocp_if dra7xx_l3_main_1__sha0 = {
+	.master		= &dra7xx_l3_main_1_hwmod,
+	.slave		= &dra7xx_sha0_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
 /* l4_per2 -> mcasp1 */
 static struct omap_hwmod_ocp_if dra7xx_l4_per2__mcasp1 = {
 	.master		= &dra7xx_l4_per2_hwmod,
@@ -3642,6 +3794,14 @@ static struct omap_hwmod_ocp_if dra7xx_l4_per2__uart7 = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
+/* l4_per1 -> des */
+static struct omap_hwmod_ocp_if dra7xx_l4_per1__des = {
+	.master		= &dra7xx_l4_per1_hwmod,
+	.slave		= &dra7xx_des_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
 /* l4_per2 -> uart8 */
 static struct omap_hwmod_ocp_if dra7xx_l4_per2__uart8 = {
 	.master		= &dra7xx_l4_per2_hwmod,
@@ -3666,6 +3826,13 @@ static struct omap_hwmod_ocp_if dra7xx_l4_wkup__uart10 = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
+/* l4_per1 -> rng */
+static struct omap_hwmod_ocp_if dra7xx_l4_per1__rng = {
+	.master         = &dra7xx_l4_per1_hwmod,
+	.slave          = &dra7xx_rng_hwmod,
+	.user           = OCP_USER_MPU,
+};
+
 /* l4_per3 -> usb_otg_ss1 */
 static struct omap_hwmod_ocp_if dra7xx_l4_per3__usb_otg_ss1 = {
 	.master		= &dra7xx_l4_per3_hwmod,
@@ -3800,6 +3967,9 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = {
 	&dra7xx_l3_main_1__dss,
 	&dra7xx_l3_main_1__dispc,
 	&dra7xx_l3_main_1__hdmi,
+	&dra7xx_l3_main_1__aes1,
+	&dra7xx_l3_main_1__aes2,
+	&dra7xx_l3_main_1__sha0,
 	&dra7xx_l4_per1__elm,
 	&dra7xx_l4_wkup__gpio1,
 	&dra7xx_l4_per1__gpio2,
@@ -3845,7 +4015,6 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = {
 	&dra7xx_l3_main_1__pciess2,
 	&dra7xx_l4_cfg__pciess2,
 	&dra7xx_l3_main_1__qspi,
-	&dra7xx_l4_per3__rtcss,
 	&dra7xx_l4_cfg__sata,
 	&dra7xx_l4_cfg__smartreflex_core,
 	&dra7xx_l4_cfg__smartreflex_mpu,
@@ -3875,6 +4044,7 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = {
 	&dra7xx_l4_per2__uart8,
 	&dra7xx_l4_per2__uart9,
 	&dra7xx_l4_wkup__uart10,
+	&dra7xx_l4_per1__des,
 	&dra7xx_l4_per3__usb_otg_ss1,
 	&dra7xx_l4_per3__usb_otg_ss2,
 	&dra7xx_l4_per3__usb_otg_ss3,
@@ -3892,6 +4062,7 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = {
 /* GP-only hwmod links */
 static struct omap_hwmod_ocp_if *dra7xx_gp_hwmod_ocp_ifs[] __initdata = {
 	&dra7xx_l4_wkup__timer12,
+	&dra7xx_l4_per1__rng,
 	NULL,
 };
 
@@ -3905,6 +4076,11 @@ static struct omap_hwmod_ocp_if *dra72x_hwmod_ocp_ifs[] __initdata = {
 	NULL,
 };
 
+static struct omap_hwmod_ocp_if *dra74x_dra72x_hwmod_ocp_ifs[] __initdata = {
+	&dra7xx_l4_per3__rtcss,
+	NULL,
+};
+
 int __init dra7xx_hwmod_init(void)
 {
 	int ret;
@@ -3920,5 +4096,9 @@ int __init dra7xx_hwmod_init(void)
 	if (!ret && omap_type() == OMAP2_DEVICE_TYPE_GP)
 		ret = omap_hwmod_register_links(dra7xx_gp_hwmod_ocp_ifs);
 
+	/* now for the IPs *NOT* in dra71 */
+	if (!ret && !of_machine_is_compatible("ti,dra718"))
+		ret = omap_hwmod_register_links(dra74x_dra72x_hwmod_ocp_ifs);
+
 	return ret;
 }

arch/arm/mach-omap2/omap_hwmod_common_data.h

@@ -19,22 +19,7 @@
 #include "display.h"
 
 /* Common address space across OMAP2xxx/3xxx */
-extern struct omap_hwmod_addr_space omap2_i2c1_addr_space[];
-extern struct omap_hwmod_addr_space omap2_i2c2_addr_space[];
-extern struct omap_hwmod_addr_space omap2_dss_addrs[];
-extern struct omap_hwmod_addr_space omap2_dss_dispc_addrs[];
-extern struct omap_hwmod_addr_space omap2_dss_rfbi_addrs[];
-extern struct omap_hwmod_addr_space omap2_dss_venc_addrs[];
-extern struct omap_hwmod_addr_space omap2_timer10_addrs[];
-extern struct omap_hwmod_addr_space omap2_timer11_addrs[];
-extern struct omap_hwmod_addr_space omap2430_mmc1_addr_space[];
-extern struct omap_hwmod_addr_space omap2430_mmc2_addr_space[];
-extern struct omap_hwmod_addr_space omap2_mcspi1_addr_space[];
-extern struct omap_hwmod_addr_space omap2_mcspi2_addr_space[];
-extern struct omap_hwmod_addr_space omap2430_mcspi3_addr_space[];
 extern struct omap_hwmod_addr_space omap2_dma_system_addrs[];
-extern struct omap_hwmod_addr_space omap2_mcbsp1_addrs[];
-extern struct omap_hwmod_addr_space omap2_hdq1w_addr_space[];
 
 /* Common IP block data across OMAP2xxx */
 extern struct omap_gpio_dev_attr omap2xxx_gpio_dev_attr;

arch/arm/mach-omap2/pdata-quirks.c

@@ -31,7 +31,6 @@
 
 #include "common.h"
 #include "common-board-devices.h"
-#include "dss-common.h"
 #include "control.h"
 #include "omap_device.h"
 #include "omap-pm.h"

arch/arm/mach-omap2/pm.c

@@ -30,7 +30,6 @@
 #include "powerdomain.h"
 #include "clockdomain.h"
 #include "pm.h"
-#include "twl-common.h"
 
 #ifdef CONFIG_SUSPEND
 /*
@@ -72,42 +71,6 @@ void omap_pm_get_oscillator(u32 *tstart, u32 *tshut)
 }
 #endif
 
-static int __init _init_omap_device(char *name)
-{
-	struct omap_hwmod *oh;
-	struct platform_device *pdev;
-
-	oh = omap_hwmod_lookup(name);
-	if (WARN(!oh, "%s: could not find omap_hwmod for %s\n",
-		 __func__, name))
-		return -ENODEV;
-
-	pdev = omap_device_build(oh->name, 0, oh, NULL, 0);
-	if (WARN(IS_ERR(pdev), "%s: could not build omap_device for %s\n",
-		 __func__, name))
-		return -ENODEV;
-
-	return 0;
-}
-
-/*
- * Build omap_devices for processors and bus.
- */
-static void __init omap2_init_processor_devices(void)
-{
-	_init_omap_device("mpu");
-	if (omap3_has_iva())
-		_init_omap_device("iva");
-
-	if (cpu_is_omap44xx()) {
-		_init_omap_device("l3_main_1");
-		_init_omap_device("dsp");
-		_init_omap_device("iva");
-	} else {
-		_init_omap_device("l3_main");
-	}
-}
-
 int __init omap_pm_clkdms_setup(struct clockdomain *clkdm, void *unused)
 {
 	clkdm_allow_idle(clkdm);
@@ -215,7 +178,7 @@ static int omap_pm_enter(suspend_state_t suspend_state)
 static int omap_pm_begin(suspend_state_t state)
 {
 	cpu_idle_poll_ctrl(true);
-	if (cpu_is_omap34xx())
+	if (soc_is_omap34xx())
 		omap_prcm_irq_prepare();
 	return 0;
 }
@@ -227,7 +190,7 @@ static void omap_pm_end(void)
 
 static void omap_pm_finish(void)
 {
-	if (cpu_is_omap34xx())
+	if (soc_is_omap34xx())
 		omap_prcm_irq_complete();
 }
 
@@ -252,7 +215,7 @@ void omap_common_suspend_init(void *pm_suspend)
 
 static void __init omap3_init_voltages(void)
 {
-	if (!cpu_is_omap34xx())
+	if (!soc_is_omap34xx())
 		return;
 
 	omap2_set_init_voltage("mpu_iva", "dpll1_ck", "mpu");
@@ -261,7 +224,7 @@ static void __init omap3_init_voltages(void)
 
 static void __init omap4_init_voltages(void)
 {
-	if (!cpu_is_omap44xx())
+	if (!soc_is_omap44xx())
 		return;
 
 	omap2_set_init_voltage("mpu", "dpll_mpu_ck", "mpu");
@@ -269,18 +232,8 @@ static void __init omap4_init_voltages(void)
 	omap2_set_init_voltage("iva", "dpll_iva_m5x2_ck", "iva");
 }
 
-static inline void omap_init_cpufreq(void)
-{
-	struct platform_device_info devinfo = { .name = "omap-cpufreq" };
-
-	if (!of_have_populated_dt())
-		platform_device_register_full(&devinfo);
-}
-
 static int __init omap2_common_pm_init(void)
 {
-	if (!of_have_populated_dt())
-		omap2_init_processor_devices();
 	omap_pm_if_init();
 
 	return 0;
@@ -289,13 +242,9 @@ omap_postcore_initcall(omap2_common_pm_init);
 
 int __init omap2_common_pm_late_init(void)
 {
-	if (of_have_populated_dt()) {
-		omap3_twl_init();
-		omap4_twl_init();
-	}
-
 	/* Init the voltage layer */
-	omap_pmic_late_init();
+	omap3_twl_init();
+	omap4_twl_init();
 	omap_voltage_late_init();
 
 	/* Initialize the voltages */
@@ -305,8 +254,5 @@ int __init omap2_common_pm_late_init(void)
 	/* Smartreflex device init */
 	omap_devinit_smartreflex();
 
-	/* cpufreq dummy device instantiation */
-	omap_init_cpufreq();
-
 	return 0;
 }

arch/arm/mach-omap2/pm44xx.c

@@ -287,7 +287,7 @@ int __init omap4_pm_init(void)
 	/* Overwrite the default cpu_do_idle() */
 	arm_pm_idle = omap_default_idle;
 
-	if (cpu_is_omap44xx())
+	if (cpu_is_omap44xx() || soc_is_omap54xx())
 		omap4_idle_init();
 
 err2:

arch/arm/mach-omap2/prcm43xx.h

@@ -92,6 +92,7 @@
 #define AM43XX_CM_PER_MAILBOX0_CLKCTRL_OFFSET		0x04b8
 #define AM43XX_CM_PER_MMC0_CLKCTRL_OFFSET		0x04c0
 #define AM43XX_CM_PER_MMC1_CLKCTRL_OFFSET		0x04c8
+#define AM43XX_CM_PER_RNG_CLKCTRL_OFFSET		0x04e0
 #define AM43XX_CM_PER_SPI0_CLKCTRL_OFFSET		0x0500
 #define AM43XX_CM_PER_SPI1_CLKCTRL_OFFSET		0x0508
 #define AM43XX_CM_PER_SPINLOCK_CLKCTRL_OFFSET		0x0528
@@ -133,6 +134,7 @@
 #define AM43XX_CM_PER_OCMCRAM_CLKCTRL_OFFSET		0x0050
 #define AM43XX_CM_PER_SHA0_CLKCTRL_OFFSET		0x0058
 #define AM43XX_CM_PER_AES0_CLKCTRL_OFFSET		0x0028
+#define AM43XX_CM_PER_DES_CLKCTRL_OFFSET		0x0030
 #define AM43XX_CM_PER_TIMER8_CLKCTRL_OFFSET		0x0560
 #define AM43XX_CM_PER_TIMER9_CLKCTRL_OFFSET		0x0568
 #define AM43XX_CM_PER_TIMER10_CLKCTRL_OFFSET		0x0570

arch/arm/mach-omap2/sdram-hynix-h8mbx00u0mer-0em.h

@@ -1,51 +0,0 @@
-/*
- * SDRC register values for the Hynix H8MBX00U0MER-0EM
- *
- * Copyright (C) 2009 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_SDRAM_HYNIX_H8MBX00U0MER0EM
-#define __ARCH_ARM_MACH_OMAP2_SDRAM_HYNIX_H8MBX00U0MER0EM
-
-#include "sdrc.h"
-
-/* Hynix H8MBX00U0MER-0EM */
-static struct omap_sdrc_params h8mbx00u0mer0em_sdrc_params[] = {
-	[0] = {
-		.rate        = 200000000,
-		.actim_ctrla = 0xa2e1b4c6,
-		.actim_ctrlb = 0x0002131c,
-		.rfr_ctrl    = 0x0005e601,
-		.mr          = 0x00000032,
-	},
-	[1] = {
-		.rate        = 166000000,
-		.actim_ctrla = 0x629db4c6,
-		.actim_ctrlb = 0x00012214,
-		.rfr_ctrl    = 0x0004dc01,
-		.mr          = 0x00000032,
-	},
-	[2] = {
-		.rate        = 100000000,
-		.actim_ctrla = 0x51912284,
-		.actim_ctrlb = 0x0002120e,
-		.rfr_ctrl    = 0x0002d101,
-		.mr          = 0x00000022,
-	},
-	[3] = {
-		.rate        = 83000000,
-		.actim_ctrla = 0x31512283,
-		.actim_ctrlb = 0x0001220a,
-		.rfr_ctrl    = 0x00025501,
-		.mr          = 0x00000022,
-	},
-	[4] = {
-		.rate        = 0
-	},
-};
-
-#endif

arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h

@@ -1,55 +0,0 @@
-/*
- * SDRC register values for the Micron MT46H32M32LF-6
- *
- * Copyright (C) 2008 Texas Instruments, Inc.
- * Copyright (C) 2008-2009 Nokia Corporation
- *
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef ARCH_ARM_MACH_OMAP2_SDRAM_MICRON_MT46H32M32LF
-#define ARCH_ARM_MACH_OMAP2_SDRAM_MICRON_MT46H32M32LF
-
-#include "sdrc.h"
-
-/* Micron MT46H32M32LF-6 */
-/* XXX Using ARE = 0x1 (no autorefresh burst) -- can this be changed? */
-static struct omap_sdrc_params mt46h32m32lf6_sdrc_params[] = {
-	[0] = {
-		.rate	     = 166000000,
-		.actim_ctrla = 0x9a9db4c6,
-		.actim_ctrlb = 0x00011217,
-		.rfr_ctrl    = 0x0004dc01,
-		.mr	     = 0x00000032,
-	},
-	[1] = {
-		.rate	     = 165941176,
-		.actim_ctrla = 0x9a9db4c6,
-		.actim_ctrlb = 0x00011217,
-		.rfr_ctrl    = 0x0004dc01,
-		.mr	     = 0x00000032,
-	},
-	[2] = {
-		.rate	     = 83000000,
-		.actim_ctrla = 0x51512283,
-		.actim_ctrlb = 0x0001120c,
-		.rfr_ctrl    = 0x00025501,
-		.mr	     = 0x00000032,
-	},
-	[3] = {
-		.rate	     = 82970588,
-		.actim_ctrla = 0x51512283,
-		.actim_ctrlb = 0x0001120c,
-		.rfr_ctrl    = 0x00025501,
-		.mr	     = 0x00000032,
-	},
-	[4] = {
-		.rate	     = 0
-	},
-};
-
-#endif

arch/arm/mach-omap2/sdram-nokia.c

@@ -1,299 +0,0 @@
-/*
- * SDRC register values for Nokia boards
- *
- * Copyright (C) 2008, 2010-2011 Nokia Corporation
- *
- * Lauri Leukkunen <lauri.leukkunen@nokia.com>
- *
- * Original code by Juha Yrjola <juha.yrjola@solidboot.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-
-#include "common.h"
-#include "sdram-nokia.h"
-#include "sdrc.h"
-
-/* In picoseconds, except for tREF (ns), tXP, tCKE, tWTR (clks) */
-struct sdram_timings {
-	u32 casl;
-	u32 tDAL;
-	u32 tDPL;
-	u32 tRRD;
-	u32 tRCD;
-	u32 tRP;
-	u32 tRAS;
-	u32 tRC;
-	u32 tRFC;
-	u32 tXSR;
-
-	u32 tREF; /* in ns */
-
-	u32 tXP;
-	u32 tCKE;
-	u32 tWTR;
-};
-
-static const struct sdram_timings nokia_97dot6mhz_timings[] = {
-	{
-		.casl = 3,
-		.tDAL = 30725,
-		.tDPL = 15362,
-		.tRRD = 10241,
-		.tRCD = 20483,
-		.tRP = 15362,
-		.tRAS = 40967,
-		.tRC = 56330,
-		.tRFC = 138266,
-		.tXSR = 204839,
-
-		.tREF = 7798,
-
-		.tXP = 2,
-		.tCKE = 4,
-		.tWTR = 2,
-	},
-};
-
-static const struct sdram_timings nokia_166mhz_timings[] = {
-	{
-		.casl = 3,
-		.tDAL = 33000,
-		.tDPL = 15000,
-		.tRRD = 12000,
-		.tRCD = 22500,
-		.tRP = 18000,
-		.tRAS = 42000,
-		.tRC = 66000,
-		.tRFC = 138000,
-		.tXSR = 200000,
-
-		.tREF = 7800,
-
-		.tXP = 2,
-		.tCKE = 2,
-		.tWTR = 2
-	},
-};
-
-static const struct sdram_timings nokia_195dot2mhz_timings[] = {
-	{
-		.casl = 3,
-		.tDAL = 30725,
-		.tDPL = 15362,
-		.tRRD = 10241,
-		.tRCD = 20483,
-		.tRP = 15362,
-		.tRAS = 40967,
-		.tRC = 56330,
-		.tRFC = 138266,
-		.tXSR = 204839,
-
-		.tREF = 7752,
-
-		.tXP = 2,
-		.tCKE = 4,
-		.tWTR = 2,
-	},
-};
-
-static const struct sdram_timings nokia_200mhz_timings[] = {
-	{
-		.casl = 3,
-		.tDAL = 30000,
-		.tDPL = 15000,
-		.tRRD = 10000,
-		.tRCD = 20000,
-		.tRP = 15000,
-		.tRAS = 40000,
-		.tRC = 55000,
-		.tRFC = 140000,
-		.tXSR = 200000,
-
-		.tREF = 7800,
-
-		.tXP = 2,
-		.tCKE = 4,
-		.tWTR = 2
-	},
-};
-
-static const struct {
-	long rate;
-	struct sdram_timings const *data;
-} nokia_timings[] = {
-	{ 83000000, nokia_166mhz_timings },
-	{ 97600000, nokia_97dot6mhz_timings },
-	{ 100000000, nokia_200mhz_timings },
-	{ 166000000, nokia_166mhz_timings },
-	{ 195200000, nokia_195dot2mhz_timings },
-	{ 200000000, nokia_200mhz_timings },
-};
-static struct omap_sdrc_params nokia_sdrc_params[ARRAY_SIZE(nokia_timings) + 1];
-
-static unsigned long sdrc_get_fclk_period(long rate)
-{
-	/* In picoseconds */
-	return 1000000000 / rate;
-}
-
-static unsigned int sdrc_ps_to_ticks(unsigned int time_ps, long rate)
-{
-	unsigned long tick_ps;
-
-	/* Calculate in picosecs to yield more exact results */
-	tick_ps = sdrc_get_fclk_period(rate);
-
-	return (time_ps + tick_ps - 1) / tick_ps;
-}
-#undef DEBUG
-#ifdef DEBUG
-static int set_sdrc_timing_regval(u32 *regval, int st_bit, int end_bit,
-				int ticks, long rate, const char *name)
-#else
-static int set_sdrc_timing_regval(u32 *regval, int st_bit, int end_bit,
-			       int ticks)
-#endif
-{
-	int mask, nr_bits;
-
-	nr_bits = end_bit - st_bit + 1;
-	if (ticks >= 1 << nr_bits)
-		return -1;
-	mask = (1 << nr_bits) - 1;
-	*regval &= ~(mask << st_bit);
-	*regval |= ticks << st_bit;
-#ifdef DEBUG
-	printk(KERN_INFO "SDRC %s: %i ticks %i ns\n", name, ticks,
-			(unsigned int)sdrc_get_fclk_period(rate) * ticks /
-			1000);
-#endif
-
-	return 0;
-}
-
-#ifdef DEBUG
-#define SDRC_SET_ONE(reg, st, end, field, rate) \
-	if (set_sdrc_timing_regval((reg), (st), (end), \
-			memory_timings->field, (rate), #field) < 0) \
-		err = -1;
-#else
-#define SDRC_SET_ONE(reg, st, end, field, rate) \
-	if (set_sdrc_timing_regval((reg), (st), (end), \
-			memory_timings->field) < 0) \
-		err = -1;
-#endif
-
-#ifdef DEBUG
-static int set_sdrc_timing_regval_ps(u32 *regval, int st_bit, int end_bit,
-				int time, long rate, const char *name)
-#else
-static int set_sdrc_timing_regval_ps(u32 *regval, int st_bit, int end_bit,
-				int time, long rate)
-#endif
-{
-	int ticks, ret;
-	ret = 0;
-
-	if (time == 0)
-		ticks = 0;
-	else
-		ticks = sdrc_ps_to_ticks(time, rate);
-
-#ifdef DEBUG
-	ret = set_sdrc_timing_regval(regval, st_bit, end_bit, ticks,
-				     rate, name);
-#else
-	ret = set_sdrc_timing_regval(regval, st_bit, end_bit, ticks);
-#endif
-
-	return ret;
-}
-
-#ifdef DEBUG
-#define SDRC_SET_ONE_PS(reg, st, end, field, rate) \
-	if (set_sdrc_timing_regval_ps((reg), (st), (end), \
-			memory_timings->field, \
-			(rate), #field) < 0) \
-		err = -1;
-
-#else
-#define SDRC_SET_ONE_PS(reg, st, end, field, rate) \
-	if (set_sdrc_timing_regval_ps((reg), (st), (end), \
-			memory_timings->field, (rate)) < 0) \
-		err = -1;
-#endif
-
-static int sdrc_timings(int id, long rate,
-			const struct sdram_timings *memory_timings)
-{
-	u32 ticks_per_ms;
-	u32 rfr, l;
-	u32 actim_ctrla = 0, actim_ctrlb = 0;
-	u32 rfr_ctrl;
-	int err = 0;
-	long l3_rate = rate / 1000;
-
-	SDRC_SET_ONE_PS(&actim_ctrla,  0,  4, tDAL, l3_rate);
-	SDRC_SET_ONE_PS(&actim_ctrla,  6,  8, tDPL, l3_rate);
-	SDRC_SET_ONE_PS(&actim_ctrla,  9, 11, tRRD, l3_rate);
-	SDRC_SET_ONE_PS(&actim_ctrla, 12, 14, tRCD, l3_rate);
-	SDRC_SET_ONE_PS(&actim_ctrla, 15, 17, tRP, l3_rate);
-	SDRC_SET_ONE_PS(&actim_ctrla, 18, 21, tRAS, l3_rate);
-	SDRC_SET_ONE_PS(&actim_ctrla, 22, 26, tRC, l3_rate);
-	SDRC_SET_ONE_PS(&actim_ctrla, 27, 31, tRFC, l3_rate);
-
-	SDRC_SET_ONE_PS(&actim_ctrlb,  0,  7, tXSR, l3_rate);
-
-	SDRC_SET_ONE(&actim_ctrlb,  8, 10, tXP, l3_rate);
-	SDRC_SET_ONE(&actim_ctrlb, 12, 14, tCKE, l3_rate);
-	SDRC_SET_ONE(&actim_ctrlb, 16, 17, tWTR, l3_rate);
-
-	ticks_per_ms = l3_rate;
-	rfr = memory_timings[0].tREF * ticks_per_ms / 1000000;
-	if (rfr > 65535 + 50)
-		rfr = 65535;
-	else
-		rfr -= 50;
-
-#ifdef DEBUG
-	printk(KERN_INFO "SDRC tREF: %i ticks\n", rfr);
-#endif
-
-	l = rfr << 8;
-	rfr_ctrl = l | 0x1; /* autorefresh, reload counter with 1xARCV */
-
-	nokia_sdrc_params[id].rate = rate;
-	nokia_sdrc_params[id].actim_ctrla = actim_ctrla;
-	nokia_sdrc_params[id].actim_ctrlb = actim_ctrlb;
-	nokia_sdrc_params[id].rfr_ctrl = rfr_ctrl;
-	nokia_sdrc_params[id].mr = 0x32;
-
-	nokia_sdrc_params[id + 1].rate = 0;
-
-	return err;
-}
-
-struct omap_sdrc_params *nokia_get_sdram_timings(void)
-{
-	int err = 0;
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(nokia_timings); i++) {
-		err |= sdrc_timings(i, nokia_timings[i].rate,
-				       nokia_timings[i].data);
-		if (err)
-			pr_err("%s: error with rate %ld: %d\n", __func__,
-			       nokia_timings[i].rate, err);
-	}
-
-	return err ? NULL : nokia_sdrc_params;
-}
-

arch/arm/mach-omap2/sdram-nokia.h

@@ -1,12 +0,0 @@
-/*
- * SDRC register values for Nokia boards
- *
- * Copyright (C) 2010 Nokia
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-struct omap_sdrc_params *nokia_get_sdram_timings(void);
-

arch/arm/mach-omap2/sdram-numonyx-m65kxxxxam.h

@@ -1,51 +0,0 @@
-/*
- * SDRC register values for the Numonyx M65KXXXXAM
- *
- * Copyright (C) 2009 Integration Software and Electronic Engineering.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_SDRAM_NUMONYX_M65KXXXXAM
-#define __ARCH_ARM_MACH_OMAP2_SDRAM_NUMONYX_M65KXXXXAM
-
-#include "sdrc.h"
-
-/* Numonyx  M65KXXXXAM */
-static struct omap_sdrc_params m65kxxxxam_sdrc_params[] = {
-	[0] = {
-		.rate		= 200000000,
-		.actim_ctrla	= 0xe321d4c6,
-		.actim_ctrlb	= 0x00022328,
-		.rfr_ctrl	= 0x0005e601,
-		.mr		= 0x00000032,
-	},
-	[1] = {
-		.rate		= 166000000,
-		.actim_ctrla	= 0xba9dc485,
-		.actim_ctrlb	= 0x00022321,
-		.rfr_ctrl	= 0x0004dc01,
-		.mr		= 0x00000032,
-	},
-	[2] = {
-		.rate		= 133000000,
-		.actim_ctrla	= 0x9a19b485,
-		.actim_ctrlb	= 0x0002231b,
-		.rfr_ctrl	= 0x0003de01,
-		.mr		= 0x00000032,
-	},
-	[3] = {
-		.rate		= 83000000,
-		.actim_ctrla	= 0x594ca242,
-		.actim_ctrlb	= 0x00022310,
-		.rfr_ctrl	= 0x00025501,
-		.mr		= 0x00000032,
-	},
-	[4] = {
-		.rate			= 0
-	},
-};
-
-#endif

arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h

@@ -1,54 +0,0 @@
-/*
- * SDRC register values for the Qimonda HYB18M512160AF-6
- *
- * Copyright (C) 2008-2009 Texas Instruments, Inc.
- * Copyright (C) 2008-2009 Nokia Corporation
- *
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef ARCH_ARM_MACH_OMAP2_SDRAM_QIMONDA_HYB18M512160AF6
-#define ARCH_ARM_MACH_OMAP2_SDRAM_QIMONDA_HYB18M512160AF6
-
-#include "sdrc.h"
-
-/* Qimonda HYB18M512160AF-6 */
-static struct omap_sdrc_params hyb18m512160af6_sdrc_params[] = {
-	[0] = {
-		.rate	     = 166000000,
-		.actim_ctrla = 0x629db4c6,
-		.actim_ctrlb = 0x00012214,
-		.rfr_ctrl    = 0x0004dc01,
-		.mr	     = 0x00000032,
-	},
-	[1] = {
-		.rate	     = 165941176,
-		.actim_ctrla = 0x629db4c6,
-		.actim_ctrlb = 0x00012214,
-		.rfr_ctrl    = 0x0004dc01,
-		.mr	     = 0x00000032,
-	},
-	[2] = {
-		.rate	     = 83000000,
-		.actim_ctrla = 0x31512283,
-		.actim_ctrlb = 0x0001220a,
-		.rfr_ctrl    = 0x00025501,
-		.mr	     = 0x00000022,
-	},
-	[3] = {
-		.rate	     = 82970588,
-		.actim_ctrla = 0x31512283,
-		.actim_ctrlb = 0x0001220a,
-		.rfr_ctrl    = 0x00025501,
-		.mr	     = 0x00000022,
-	},
-	[4] = {
-		.rate	     = 0
-	},
-};
-
-#endif

arch/arm/mach-omap2/serial.c

@@ -1,332 +0,0 @@
-/*
- * arch/arm/mach-omap2/serial.c
- *
- * OMAP2 serial support.
- *
- * Copyright (C) 2005-2008 Nokia Corporation
- * Author: Paul Mundt <paul.mundt@nokia.com>
- *
- * Major rework for PM support by Kevin Hilman
- *
- * Based off of arch/arm/mach-omap/omap1/serial.c
- *
- * Copyright (C) 2009 Texas Instruments
- * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/pm_runtime.h>
-#include <linux/console.h>
-#include <linux/omap-dma.h>
-#include <linux/platform_data/serial-omap.h>
-
-#include "common.h"
-#include "omap_hwmod.h"
-#include "omap_device.h"
-#include "omap-pm.h"
-#include "soc.h"
-#include "prm2xxx_3xxx.h"
-#include "pm.h"
-#include "cm2xxx_3xxx.h"
-#include "prm-regbits-34xx.h"
-#include "control.h"
-#include "mux.h"
-#include "serial.h"
-
-/*
- * NOTE: By default the serial auto_suspend timeout is disabled as it causes
- * lost characters over the serial ports. This means that the UART clocks will
- * stay on until power/autosuspend_delay is set for the uart from sysfs.
- * This also causes that any deeper omap sleep states are blocked.
- */
-#define DEFAULT_AUTOSUSPEND_DELAY	-1
-
-#define MAX_UART_HWMOD_NAME_LEN		16
-
-struct omap_uart_state {
-	int num;
-
-	struct list_head node;
-	struct omap_hwmod *oh;
-	struct omap_device_pad default_omap_uart_pads[2];
-};
-
-static LIST_HEAD(uart_list);
-static u8 num_uarts;
-static u8 console_uart_id = -1;
-static u8 uart_debug;
-
-#define DEFAULT_RXDMA_POLLRATE		1	/* RX DMA polling rate (us) */
-#define DEFAULT_RXDMA_BUFSIZE		4096	/* RX DMA buffer size */
-#define DEFAULT_RXDMA_TIMEOUT		(3 * HZ)/* RX DMA timeout (jiffies) */
-
-static struct omap_uart_port_info omap_serial_default_info[] __initdata = {
-	{
-		.dma_enabled	= false,
-		.dma_rx_buf_size = DEFAULT_RXDMA_BUFSIZE,
-		.dma_rx_poll_rate = DEFAULT_RXDMA_POLLRATE,
-		.dma_rx_timeout = DEFAULT_RXDMA_TIMEOUT,
-		.autosuspend_timeout = DEFAULT_AUTOSUSPEND_DELAY,
-	},
-};
-
-#ifdef CONFIG_PM
-static void omap_uart_enable_wakeup(struct device *dev, bool enable)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	struct omap_device *od = to_omap_device(pdev);
-
-	if (!od)
-		return;
-
-	if (enable)
-		omap_hwmod_enable_wakeup(od->hwmods[0]);
-	else
-		omap_hwmod_disable_wakeup(od->hwmods[0]);
-}
-
-#else
-static void omap_uart_enable_wakeup(struct device *dev, bool enable)
-{}
-#endif /* CONFIG_PM */
-
-#ifdef CONFIG_OMAP_MUX
-
-#define OMAP_UART_DEFAULT_PAD_NAME_LEN	28
-static char rx_pad_name[OMAP_UART_DEFAULT_PAD_NAME_LEN],
-		tx_pad_name[OMAP_UART_DEFAULT_PAD_NAME_LEN] __initdata;
-
-static void  __init
-omap_serial_fill_uart_tx_rx_pads(struct omap_board_data *bdata,
-				struct omap_uart_state *uart)
-{
-	uart->default_omap_uart_pads[0].name = rx_pad_name;
-	uart->default_omap_uart_pads[0].flags = OMAP_DEVICE_PAD_REMUX |
-							OMAP_DEVICE_PAD_WAKEUP;
-	uart->default_omap_uart_pads[0].enable = OMAP_PIN_INPUT |
-							OMAP_MUX_MODE0;
-	uart->default_omap_uart_pads[0].idle = OMAP_PIN_INPUT | OMAP_MUX_MODE0;
-	uart->default_omap_uart_pads[1].name = tx_pad_name;
-	uart->default_omap_uart_pads[1].enable = OMAP_PIN_OUTPUT |
-							OMAP_MUX_MODE0;
-	bdata->pads = uart->default_omap_uart_pads;
-	bdata->pads_cnt = ARRAY_SIZE(uart->default_omap_uart_pads);
-}
-
-static void  __init omap_serial_check_wakeup(struct omap_board_data *bdata,
-						struct omap_uart_state *uart)
-{
-	struct omap_mux_partition *tx_partition = NULL, *rx_partition = NULL;
-	struct omap_mux *rx_mux = NULL, *tx_mux = NULL;
-	char *rx_fmt, *tx_fmt;
-	int uart_nr = bdata->id + 1;
-
-	if (bdata->id != 2) {
-		rx_fmt = "uart%d_rx.uart%d_rx";
-		tx_fmt = "uart%d_tx.uart%d_tx";
-	} else {
-		rx_fmt = "uart%d_rx_irrx.uart%d_rx_irrx";
-		tx_fmt = "uart%d_tx_irtx.uart%d_tx_irtx";
-	}
-
-	snprintf(rx_pad_name, OMAP_UART_DEFAULT_PAD_NAME_LEN, rx_fmt,
-			uart_nr, uart_nr);
-	snprintf(tx_pad_name, OMAP_UART_DEFAULT_PAD_NAME_LEN, tx_fmt,
-			uart_nr, uart_nr);
-
-	if (omap_mux_get_by_name(rx_pad_name, &rx_partition, &rx_mux) >= 0 &&
-			omap_mux_get_by_name
-				(tx_pad_name, &tx_partition, &tx_mux) >= 0) {
-		u16 tx_mode, rx_mode;
-
-		tx_mode = omap_mux_read(tx_partition, tx_mux->reg_offset);
-		rx_mode = omap_mux_read(rx_partition, rx_mux->reg_offset);
-
-		/*
-		 * Check if uart is used in default tx/rx mode i.e. in mux mode0
-		 * if yes then configure rx pin for wake up capability
-		 */
-		if (OMAP_MODE_UART(rx_mode) && OMAP_MODE_UART(tx_mode))
-			omap_serial_fill_uart_tx_rx_pads(bdata, uart);
-	}
-}
-#else
-static void __init omap_serial_check_wakeup(struct omap_board_data *bdata,
-		struct omap_uart_state *uart)
-{
-}
-#endif
-
-static char *cmdline_find_option(char *str)
-{
-	extern char *saved_command_line;
-
-	return strstr(saved_command_line, str);
-}
-
-static int __init omap_serial_early_init(void)
-{
-	if (of_have_populated_dt())
-		return -ENODEV;
-
-	do {
-		char oh_name[MAX_UART_HWMOD_NAME_LEN];
-		struct omap_hwmod *oh;
-		struct omap_uart_state *uart;
-		char uart_name[MAX_UART_HWMOD_NAME_LEN];
-
-		snprintf(oh_name, MAX_UART_HWMOD_NAME_LEN,
-			 "uart%d", num_uarts + 1);
-		oh = omap_hwmod_lookup(oh_name);
-		if (!oh)
-			break;
-
-		uart = kzalloc(sizeof(struct omap_uart_state), GFP_KERNEL);
-		if (WARN_ON(!uart))
-			return -ENODEV;
-
-		uart->oh = oh;
-		uart->num = num_uarts++;
-		list_add_tail(&uart->node, &uart_list);
-		snprintf(uart_name, MAX_UART_HWMOD_NAME_LEN,
-				"%s%d", OMAP_SERIAL_NAME, uart->num);
-
-		if (cmdline_find_option(uart_name)) {
-			console_uart_id = uart->num;
-
-			if (console_loglevel >= CONSOLE_LOGLEVEL_DEBUG) {
-				uart_debug = true;
-				pr_info("%s used as console in debug mode: uart%d clocks will not be gated",
-					uart_name, uart->num);
-			}
-		}
-	} while (1);
-
-	return 0;
-}
-omap_postcore_initcall(omap_serial_early_init);
-
-/**
- * omap_serial_init_port() - initialize single serial port
- * @bdata: port specific board data pointer
- * @info: platform specific data pointer
- *
- * This function initialies serial driver for given port only.
- * Platforms can call this function instead of omap_serial_init()
- * if they don't plan to use all available UARTs as serial ports.
- *
- * Don't mix calls to omap_serial_init_port() and omap_serial_init(),
- * use only one of the two.
- */
-void __init omap_serial_init_port(struct omap_board_data *bdata,
-			struct omap_uart_port_info *info)
-{
-	struct omap_uart_state *uart;
-	struct omap_hwmod *oh;
-	struct platform_device *pdev;
-	void *pdata = NULL;
-	u32 pdata_size = 0;
-	char *name;
-	struct omap_uart_port_info omap_up;
-
-	if (WARN_ON(!bdata))
-		return;
-	if (WARN_ON(bdata->id < 0))
-		return;
-	if (WARN_ON(bdata->id >= num_uarts))
-		return;
-
-	list_for_each_entry(uart, &uart_list, node)
-		if (bdata->id == uart->num)
-			break;
-	if (!info)
-		info = omap_serial_default_info;
-
-	oh = uart->oh;
-	name = OMAP_SERIAL_DRIVER_NAME;
-
-	omap_up.dma_enabled = info->dma_enabled;
-	omap_up.uartclk = OMAP24XX_BASE_BAUD * 16;
-	omap_up.flags = UPF_BOOT_AUTOCONF;
-	omap_up.get_context_loss_count = omap_pm_get_dev_context_loss_count;
-	omap_up.enable_wakeup = omap_uart_enable_wakeup;
-	omap_up.dma_rx_buf_size = info->dma_rx_buf_size;
-	omap_up.dma_rx_timeout = info->dma_rx_timeout;
-	omap_up.dma_rx_poll_rate = info->dma_rx_poll_rate;
-	omap_up.autosuspend_timeout = info->autosuspend_timeout;
-
-	pdata = &omap_up;
-	pdata_size = sizeof(struct omap_uart_port_info);
-
-	if (WARN_ON(!oh))
-		return;
-
-	pdev = omap_device_build(name, uart->num, oh, pdata, pdata_size);
-	if (IS_ERR(pdev)) {
-		WARN(1, "Could not build omap_device for %s: %s.\n", name,
-		     oh->name);
-		return;
-	}
-
-	oh->mux = omap_hwmod_mux_init(bdata->pads, bdata->pads_cnt);
-
-	if (console_uart_id == bdata->id) {
-		omap_device_enable(pdev);
-		pm_runtime_set_active(&pdev->dev);
-	}
-
-	oh->dev_attr = uart;
-
-	if (((cpu_is_omap34xx() || cpu_is_omap44xx()) && bdata->pads)
-			&& !uart_debug)
-		device_init_wakeup(&pdev->dev, true);
-}
-
-/**
- * omap_serial_board_init() - initialize all supported serial ports
- * @info: platform specific data pointer
- *
- * Initializes all available UARTs as serial ports. Platforms
- * can call this function when they want to have default behaviour
- * for serial ports (e.g initialize them all as serial ports).
- */
-void __init omap_serial_board_init(struct omap_uart_port_info *info)
-{
-	struct omap_uart_state *uart;
-	struct omap_board_data bdata;
-
-	list_for_each_entry(uart, &uart_list, node) {
-		bdata.id = uart->num;
-		bdata.flags = 0;
-		bdata.pads = NULL;
-		bdata.pads_cnt = 0;
-
-		omap_serial_check_wakeup(&bdata, uart);
-
-		if (!info)
-			omap_serial_init_port(&bdata, NULL);
-		else
-			omap_serial_init_port(&bdata, &info[uart->num]);
-	}
-}
-
-/**
- * omap_serial_init() - initialize all supported serial ports
- *
- * Initializes all available UARTs.
- * Platforms can call this function when they want to have default behaviour
- * for serial ports (e.g initialize them all as serial ports).
- */
-void __init omap_serial_init(void)
-{
-	omap_serial_board_init(NULL);
-}

arch/arm/mach-omap2/twl-common.c

@@ -1,564 +0,0 @@
-/*
- * twl-common.c
- *
- * Copyright (C) 2011 Texas Instruments, Inc..
- * Author: Peter Ujfalusi <peter.ujfalusi@ti.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#include <linux/i2c.h>
-#include <linux/i2c/twl.h>
-#include <linux/gpio.h>
-#include <linux/string.h>
-#include <linux/phy/phy.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-
-#include "soc.h"
-#include "twl-common.h"
-#include "pm.h"
-#include "voltage.h"
-#include "mux.h"
-
-static struct i2c_board_info __initdata pmic_i2c_board_info = {
-	.addr		= 0x48,
-	.flags		= I2C_CLIENT_WAKE,
-};
-
-#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
-static int twl_set_voltage(void *data, int target_uV)
-{
-	struct voltagedomain *voltdm = (struct voltagedomain *)data;
-	return voltdm_scale(voltdm, target_uV);
-}
-
-static int twl_get_voltage(void *data)
-{
-	struct voltagedomain *voltdm = (struct voltagedomain *)data;
-	return voltdm_get_voltage(voltdm);
-}
-#endif
-
-void __init omap_pmic_init(int bus, u32 clkrate,
-			   const char *pmic_type, int pmic_irq,
-			   struct twl4030_platform_data *pmic_data)
-{
-	omap_mux_init_signal("sys_nirq", OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE);
-	strlcpy(pmic_i2c_board_info.type, pmic_type,
-		sizeof(pmic_i2c_board_info.type));
-	pmic_i2c_board_info.irq = pmic_irq;
-	pmic_i2c_board_info.platform_data = pmic_data;
-
-	omap_register_i2c_bus(bus, clkrate, &pmic_i2c_board_info, 1);
-}
-
-#ifdef CONFIG_ARCH_OMAP4
-void __init omap4_pmic_init(const char *pmic_type,
-		    struct twl4030_platform_data *pmic_data,
-		    struct i2c_board_info *devices, int nr_devices)
-{
-	/* PMIC part*/
-	unsigned int irq;
-
-	omap_mux_init_signal("sys_nirq1", OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE);
-	omap_mux_init_signal("fref_clk0_out.sys_drm_msecure", OMAP_PIN_OUTPUT);
-	irq = omap4_xlate_irq(7 + OMAP44XX_IRQ_GIC_START);
-	omap_pmic_init(1, 400, pmic_type, irq, pmic_data);
-
-	/* Register additional devices on i2c1 bus if needed */
-	if (devices)
-		i2c_register_board_info(1, devices, nr_devices);
-}
-#endif
-
-void __init omap_pmic_late_init(void)
-{
-	/* Init the OMAP TWL parameters (if PMIC has been registerd) */
-	if (!pmic_i2c_board_info.irq)
-		return;
-
-	omap3_twl_init();
-	omap4_twl_init();
-}
-
-#if defined(CONFIG_ARCH_OMAP3)
-static struct twl4030_usb_data omap3_usb_pdata = {
-	.usb_mode = T2_USB_MODE_ULPI,
-};
-
-static int omap3_batt_table[] = {
-/* 0 C */
-30800, 29500, 28300, 27100,
-26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, 17900,
-17200, 16500, 15900, 15300, 14700, 14100, 13600, 13100, 12600, 12100,
-11600, 11200, 10800, 10400, 10000, 9630,  9280,  8950,  8620,  8310,
-8020,  7730,  7460,  7200,  6950,  6710,  6470,  6250,  6040,  5830,
-5640,  5450,  5260,  5090,  4920,  4760,  4600,  4450,  4310,  4170,
-4040,  3910,  3790,  3670,  3550
-};
-
-static struct twl4030_bci_platform_data omap3_bci_pdata = {
-	.battery_tmp_tbl	= omap3_batt_table,
-	.tblsize		= ARRAY_SIZE(omap3_batt_table),
-};
-
-static struct twl4030_madc_platform_data omap3_madc_pdata = {
-	.irq_line	= 1,
-};
-
-static struct twl4030_codec_data omap3_codec;
-
-static struct twl4030_audio_data omap3_audio_pdata = {
-	.audio_mclk = 26000000,
-	.codec = &omap3_codec,
-};
-
-static struct regulator_consumer_supply omap3_vdda_dac_supplies[] = {
-	REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"),
-};
-
-static struct regulator_init_data omap3_vdac_idata = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(omap3_vdda_dac_supplies),
-	.consumer_supplies	= omap3_vdda_dac_supplies,
-};
-
-static struct regulator_consumer_supply omap3_vpll2_supplies[] = {
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dpi.0"),
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"),
-};
-
-static struct regulator_init_data omap3_vpll2_idata = {
-	.constraints = {
-		.min_uV                 = 1800000,
-		.max_uV                 = 1800000,
-		.valid_modes_mask       = REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask         = REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies		= ARRAY_SIZE(omap3_vpll2_supplies),
-	.consumer_supplies		= omap3_vpll2_supplies,
-};
-
-static struct regulator_consumer_supply omap3_vdd1_supply[] = {
-	REGULATOR_SUPPLY("vcc", "cpu0"),
-};
-
-static struct regulator_consumer_supply omap3_vdd2_supply[] = {
-	REGULATOR_SUPPLY("vcc", "l3_main.0"),
-};
-
-static struct regulator_init_data omap3_vdd1 = {
-	.constraints = {
-		.name			= "vdd_mpu_iva",
-		.min_uV			= 600000,
-		.max_uV			= 1450000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE,
-	},
-	.num_consumer_supplies		= ARRAY_SIZE(omap3_vdd1_supply),
-	.consumer_supplies		= omap3_vdd1_supply,
-};
-
-static struct regulator_init_data omap3_vdd2 = {
-	.constraints = {
-		.name			= "vdd_core",
-		.min_uV			= 600000,
-		.max_uV			= 1450000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE,
-	},
-	.num_consumer_supplies		= ARRAY_SIZE(omap3_vdd2_supply),
-	.consumer_supplies		= omap3_vdd2_supply,
-};
-
-static struct twl_regulator_driver_data omap3_vdd1_drvdata = {
-	.get_voltage = twl_get_voltage,
-	.set_voltage = twl_set_voltage,
-};
-
-static struct twl_regulator_driver_data omap3_vdd2_drvdata = {
-	.get_voltage = twl_get_voltage,
-	.set_voltage = twl_set_voltage,
-};
-
-void __init omap3_pmic_get_config(struct twl4030_platform_data *pmic_data,
-				  u32 pdata_flags, u32 regulators_flags)
-{
-	if (!pmic_data->vdd1) {
-		omap3_vdd1.driver_data = &omap3_vdd1_drvdata;
-		omap3_vdd1_drvdata.data = voltdm_lookup("mpu_iva");
-		pmic_data->vdd1 = &omap3_vdd1;
-	}
-	if (!pmic_data->vdd2) {
-		omap3_vdd2.driver_data = &omap3_vdd2_drvdata;
-		omap3_vdd2_drvdata.data = voltdm_lookup("core");
-		pmic_data->vdd2 = &omap3_vdd2;
-	}
-
-	/* Common platform data configurations */
-	if (pdata_flags & TWL_COMMON_PDATA_USB && !pmic_data->usb)
-		pmic_data->usb = &omap3_usb_pdata;
-
-	if (pdata_flags & TWL_COMMON_PDATA_BCI && !pmic_data->bci)
-		pmic_data->bci = &omap3_bci_pdata;
-
-	if (pdata_flags & TWL_COMMON_PDATA_MADC && !pmic_data->madc)
-		pmic_data->madc = &omap3_madc_pdata;
-
-	if (pdata_flags & TWL_COMMON_PDATA_AUDIO && !pmic_data->audio)
-		pmic_data->audio = &omap3_audio_pdata;
-
-	/* Common regulator configurations */
-	if (regulators_flags & TWL_COMMON_REGULATOR_VDAC && !pmic_data->vdac)
-		pmic_data->vdac = &omap3_vdac_idata;
-
-	if (regulators_flags & TWL_COMMON_REGULATOR_VPLL2 && !pmic_data->vpll2)
-		pmic_data->vpll2 = &omap3_vpll2_idata;
-}
-#endif /* CONFIG_ARCH_OMAP3 */
-
-#if defined(CONFIG_ARCH_OMAP4)
-static struct twl4030_usb_data omap4_usb_pdata = {
-};
-
-static struct regulator_consumer_supply omap4_vdda_hdmi_dac_supplies[] = {
-	REGULATOR_SUPPLY("vdda_hdmi_dac", "omapdss_hdmi"),
-};
-
-static struct regulator_init_data omap4_vdac_idata = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(omap4_vdda_hdmi_dac_supplies),
-	.consumer_supplies	= omap4_vdda_hdmi_dac_supplies,
-	.supply_regulator	= "V2V1",
-};
-
-static struct regulator_init_data omap4_vaux2_idata = {
-	.constraints = {
-		.min_uV			= 1200000,
-		.max_uV			= 2800000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-};
-
-static struct regulator_init_data omap4_vaux3_idata = {
-	.constraints = {
-		.min_uV			= 1000000,
-		.max_uV			= 3000000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-};
-
-static struct regulator_consumer_supply omap4_vmmc_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
-};
-
-/* VMMC1 for MMC1 card */
-static struct regulator_init_data omap4_vmmc_idata = {
-	.constraints = {
-		.min_uV			= 1200000,
-		.max_uV			= 3000000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies  = ARRAY_SIZE(omap4_vmmc_supply),
-	.consumer_supplies      = omap4_vmmc_supply,
-};
-
-static struct regulator_init_data omap4_vpp_idata = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 2500000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-};
-
-static struct regulator_init_data omap4_vana_idata = {
-	.constraints = {
-		.min_uV			= 2100000,
-		.max_uV			= 2100000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-};
-
-static struct regulator_consumer_supply omap4_vcxio_supply[] = {
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dss"),
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"),
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.1"),
-};
-
-static struct regulator_init_data omap4_vcxio_idata = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-		.always_on		= true,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(omap4_vcxio_supply),
-	.consumer_supplies	= omap4_vcxio_supply,
-	.supply_regulator	= "V2V1",
-};
-
-static struct regulator_init_data omap4_vusb_idata = {
-	.constraints = {
-		.min_uV			= 3300000,
-		.max_uV			= 3300000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-};
-
-static struct regulator_init_data omap4_clk32kg_idata = {
-	.constraints = {
-		.valid_ops_mask		= REGULATOR_CHANGE_STATUS,
-	},
-};
-
-static struct regulator_consumer_supply omap4_vdd1_supply[] = {
-	REGULATOR_SUPPLY("vcc", "cpu0"),
-};
-
-static struct regulator_consumer_supply omap4_vdd2_supply[] = {
-	REGULATOR_SUPPLY("vcc", "iva.0"),
-};
-
-static struct regulator_consumer_supply omap4_vdd3_supply[] = {
-	REGULATOR_SUPPLY("vcc", "l3_main.0"),
-};
-
-static struct regulator_init_data omap4_vdd1 = {
-	.constraints = {
-		.name			= "vdd_mpu",
-		.min_uV			= 500000,
-		.max_uV			= 1500000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE,
-	},
-	.num_consumer_supplies		= ARRAY_SIZE(omap4_vdd1_supply),
-	.consumer_supplies		= omap4_vdd1_supply,
-};
-
-static struct regulator_init_data omap4_vdd2 = {
-	.constraints = {
-		.name			= "vdd_iva",
-		.min_uV			= 500000,
-		.max_uV			= 1500000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE,
-	},
-	.num_consumer_supplies		= ARRAY_SIZE(omap4_vdd2_supply),
-	.consumer_supplies		= omap4_vdd2_supply,
-};
-
-static struct regulator_init_data omap4_vdd3 = {
-	.constraints = {
-		.name			= "vdd_core",
-		.min_uV			= 500000,
-		.max_uV			= 1500000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE,
-	},
-	.num_consumer_supplies		= ARRAY_SIZE(omap4_vdd3_supply),
-	.consumer_supplies		= omap4_vdd3_supply,
-};
-
-
-static struct twl_regulator_driver_data omap4_vdd1_drvdata = {
-	.get_voltage = twl_get_voltage,
-	.set_voltage = twl_set_voltage,
-};
-
-static struct twl_regulator_driver_data omap4_vdd2_drvdata = {
-	.get_voltage = twl_get_voltage,
-	.set_voltage = twl_set_voltage,
-};
-
-static struct twl_regulator_driver_data omap4_vdd3_drvdata = {
-	.get_voltage = twl_get_voltage,
-	.set_voltage = twl_set_voltage,
-};
-
-static struct regulator_consumer_supply omap4_v1v8_supply[] = {
-	REGULATOR_SUPPLY("vio", "1-004b"),
-};
-
-static struct regulator_init_data omap4_v1v8_idata = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-		.always_on		= true,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(omap4_v1v8_supply),
-	.consumer_supplies	= omap4_v1v8_supply,
-};
-
-static struct regulator_consumer_supply omap4_v2v1_supply[] = {
-	REGULATOR_SUPPLY("v2v1", "1-004b"),
-};
-
-static struct regulator_init_data omap4_v2v1_idata = {
-	.constraints = {
-		.min_uV			= 2100000,
-		.max_uV			= 2100000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(omap4_v2v1_supply),
-	.consumer_supplies	= omap4_v2v1_supply,
-};
-
-void __init omap4_pmic_get_config(struct twl4030_platform_data *pmic_data,
-				  u32 pdata_flags, u32 regulators_flags)
-{
-	if (!pmic_data->vdd1) {
-		omap4_vdd1.driver_data = &omap4_vdd1_drvdata;
-		omap4_vdd1_drvdata.data = voltdm_lookup("mpu");
-		pmic_data->vdd1 = &omap4_vdd1;
-	}
-
-	if (!pmic_data->vdd2) {
-		omap4_vdd2.driver_data = &omap4_vdd2_drvdata;
-		omap4_vdd2_drvdata.data = voltdm_lookup("iva");
-		pmic_data->vdd2 = &omap4_vdd2;
-	}
-
-	if (!pmic_data->vdd3) {
-		omap4_vdd3.driver_data = &omap4_vdd3_drvdata;
-		omap4_vdd3_drvdata.data = voltdm_lookup("core");
-		pmic_data->vdd3 = &omap4_vdd3;
-	}
-
-	/* Common platform data configurations */
-	if (pdata_flags & TWL_COMMON_PDATA_USB && !pmic_data->usb)
-		pmic_data->usb = &omap4_usb_pdata;
-
-	/* Common regulator configurations */
-	if (regulators_flags & TWL_COMMON_REGULATOR_VDAC && !pmic_data->vdac)
-		pmic_data->vdac = &omap4_vdac_idata;
-
-	if (regulators_flags & TWL_COMMON_REGULATOR_VAUX2 && !pmic_data->vaux2)
-		pmic_data->vaux2 = &omap4_vaux2_idata;
-
-	if (regulators_flags & TWL_COMMON_REGULATOR_VAUX3 && !pmic_data->vaux3)
-		pmic_data->vaux3 = &omap4_vaux3_idata;
-
-	if (regulators_flags & TWL_COMMON_REGULATOR_VMMC && !pmic_data->vmmc)
-		pmic_data->vmmc = &omap4_vmmc_idata;
-
-	if (regulators_flags & TWL_COMMON_REGULATOR_VPP && !pmic_data->vpp)
-		pmic_data->vpp = &omap4_vpp_idata;
-
-	if (regulators_flags & TWL_COMMON_REGULATOR_VANA && !pmic_data->vana)
-		pmic_data->vana = &omap4_vana_idata;
-
-	if (regulators_flags & TWL_COMMON_REGULATOR_VCXIO && !pmic_data->vcxio)
-		pmic_data->vcxio = &omap4_vcxio_idata;
-
-	if (regulators_flags & TWL_COMMON_REGULATOR_VUSB && !pmic_data->vusb)
-		pmic_data->vusb = &omap4_vusb_idata;
-
-	if (regulators_flags & TWL_COMMON_REGULATOR_CLK32KG &&
-	    !pmic_data->clk32kg)
-		pmic_data->clk32kg = &omap4_clk32kg_idata;
-
-	if (regulators_flags & TWL_COMMON_REGULATOR_V1V8 && !pmic_data->v1v8)
-		pmic_data->v1v8 = &omap4_v1v8_idata;
-
-	if (regulators_flags & TWL_COMMON_REGULATOR_V2V1 && !pmic_data->v2v1)
-		pmic_data->v2v1 = &omap4_v2v1_idata;
-}
-#endif /* CONFIG_ARCH_OMAP4 */
-
-#if IS_ENABLED(CONFIG_SND_OMAP_SOC_OMAP_TWL4030)
-#include <linux/platform_data/omap-twl4030.h>
-
-/* Commonly used configuration */
-static struct omap_tw4030_pdata omap_twl4030_audio_data;
-
-static struct platform_device audio_device = {
-	.name		= "omap-twl4030",
-	.id		= -1,
-};
-
-void omap_twl4030_audio_init(char *card_name,
-				    struct omap_tw4030_pdata *pdata)
-{
-	if (!pdata)
-		pdata = &omap_twl4030_audio_data;
-
-	pdata->card_name = card_name;
-
-	audio_device.dev.platform_data = pdata;
-	platform_device_register(&audio_device);
-}
-
-#else /* SOC_OMAP_TWL4030 */
-void omap_twl4030_audio_init(char *card_name,
-				    struct omap_tw4030_pdata *pdata)
-{
-	return;
-}
-#endif /* SOC_OMAP_TWL4030 */

arch/arm/mach-omap2/twl-common.h

@@ -1,66 +0,0 @@
-#ifndef __OMAP_PMIC_COMMON__
-#define __OMAP_PMIC_COMMON__
-
-#include "common.h"
-
-#define TWL_COMMON_PDATA_USB		(1 << 0)
-#define TWL_COMMON_PDATA_BCI		(1 << 1)
-#define TWL_COMMON_PDATA_MADC		(1 << 2)
-#define TWL_COMMON_PDATA_AUDIO		(1 << 3)
-
-/* Common LDO regulators for TWL4030/TWL6030 */
-#define TWL_COMMON_REGULATOR_VDAC	(1 << 0)
-#define TWL_COMMON_REGULATOR_VAUX1	(1 << 1)
-#define TWL_COMMON_REGULATOR_VAUX2	(1 << 2)
-#define TWL_COMMON_REGULATOR_VAUX3	(1 << 3)
-
-/* TWL6030 LDO regulators */
-#define TWL_COMMON_REGULATOR_VMMC	(1 << 4)
-#define TWL_COMMON_REGULATOR_VPP	(1 << 5)
-#define TWL_COMMON_REGULATOR_VUSIM	(1 << 6)
-#define TWL_COMMON_REGULATOR_VANA	(1 << 7)
-#define TWL_COMMON_REGULATOR_VCXIO	(1 << 8)
-#define TWL_COMMON_REGULATOR_VUSB	(1 << 9)
-#define TWL_COMMON_REGULATOR_CLK32KG	(1 << 10)
-#define TWL_COMMON_REGULATOR_V1V8	(1 << 11)
-#define TWL_COMMON_REGULATOR_V2V1	(1 << 12)
-
-/* TWL4030 LDO regulators */
-#define TWL_COMMON_REGULATOR_VPLL1	(1 << 4)
-#define TWL_COMMON_REGULATOR_VPLL2	(1 << 5)
-
-
-struct twl4030_platform_data;
-struct twl6040_platform_data;
-struct omap_tw4030_pdata;
-struct i2c_board_info;
-
-void omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq,
-		    struct twl4030_platform_data *pmic_data);
-void omap_pmic_late_init(void);
-
-static inline void omap2_pmic_init(const char *pmic_type,
-				   struct twl4030_platform_data *pmic_data)
-{
-	omap_pmic_init(2, 2600, pmic_type, 7 + OMAP_INTC_START, pmic_data);
-}
-
-static inline void omap3_pmic_init(const char *pmic_type,
-				   struct twl4030_platform_data *pmic_data)
-{
-	omap_pmic_init(1, 2600, pmic_type, 7 + OMAP_INTC_START, pmic_data);
-}
-
-void omap4_pmic_init(const char *pmic_type,
-		    struct twl4030_platform_data *pmic_data,
-		    struct i2c_board_info *devices, int nr_devices);
-
-void omap3_pmic_get_config(struct twl4030_platform_data *pmic_data,
-			   u32 pdata_flags, u32 regulators_flags);
-
-void omap4_pmic_get_config(struct twl4030_platform_data *pmic_data,
-			   u32 pdata_flags, u32 regulators_flags);
-
-void omap_twl4030_audio_init(char *card_name, struct omap_tw4030_pdata *pdata);
-
-#endif /* __OMAP_PMIC_COMMON__ */

arch/arm/mach-omap2/usb-host.c

@@ -1,496 +0,0 @@
-/*
- * usb-host.c - OMAP USB Host
- *
- * This file will contain the board specific details for the
- * Synopsys EHCI/OHCI host controller on OMAP3430 and onwards
- *
- * Copyright (C) 2007-2011 Texas Instruments
- * Author: Vikram Pandita <vikram.pandita@ti.com>
- * Author: Keshava Munegowda <keshava_mgowda@ti.com>
- *
- * Generalization by:
- * Felipe Balbi <balbi@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/dma-mapping.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-#include <linux/string.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/usb/phy.h>
-#include <linux/usb/usb_phy_generic.h>
-
-#include "soc.h"
-#include "omap_device.h"
-#include "mux.h"
-#include "usb.h"
-
-#ifdef CONFIG_MFD_OMAP_USB_HOST
-
-#define OMAP_USBHS_DEVICE	"usbhs_omap"
-#define OMAP_USBTLL_DEVICE	"usbhs_tll"
-#define	USBHS_UHH_HWMODNAME	"usb_host_hs"
-#define USBHS_TLL_HWMODNAME	"usb_tll_hs"
-
-/* MUX settings for EHCI pins */
-/*
- * setup_ehci_io_mux - initialize IO pad mux for USBHOST
- */
-static void __init setup_ehci_io_mux(const enum usbhs_omap_port_mode *port_mode)
-{
-	switch (port_mode[0]) {
-	case OMAP_EHCI_PORT_MODE_PHY:
-		omap_mux_init_signal("hsusb1_stp", OMAP_PIN_OUTPUT);
-		omap_mux_init_signal("hsusb1_clk", OMAP_PIN_OUTPUT);
-		omap_mux_init_signal("hsusb1_dir", OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb1_nxt", OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb1_data0", OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb1_data1", OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb1_data2", OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb1_data3", OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb1_data4", OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb1_data5", OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb1_data6", OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb1_data7", OMAP_PIN_INPUT_PULLDOWN);
-		break;
-	case OMAP_EHCI_PORT_MODE_TLL:
-		omap_mux_init_signal("hsusb1_tll_stp",
-			OMAP_PIN_INPUT_PULLUP);
-		omap_mux_init_signal("hsusb1_tll_clk",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb1_tll_dir",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb1_tll_nxt",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb1_tll_data0",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb1_tll_data1",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb1_tll_data2",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb1_tll_data3",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb1_tll_data4",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb1_tll_data5",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb1_tll_data6",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb1_tll_data7",
-			OMAP_PIN_INPUT_PULLDOWN);
-		break;
-	case OMAP_USBHS_PORT_MODE_UNUSED:
-		/* FALLTHROUGH */
-	default:
-		break;
-	}
-
-	switch (port_mode[1]) {
-	case OMAP_EHCI_PORT_MODE_PHY:
-		omap_mux_init_signal("hsusb2_stp", OMAP_PIN_OUTPUT);
-		omap_mux_init_signal("hsusb2_clk", OMAP_PIN_OUTPUT);
-		omap_mux_init_signal("hsusb2_dir", OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb2_nxt", OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb2_data0",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb2_data1",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb2_data2",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb2_data3",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb2_data4",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb2_data5",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb2_data6",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb2_data7",
-			OMAP_PIN_INPUT_PULLDOWN);
-		break;
-	case OMAP_EHCI_PORT_MODE_TLL:
-		omap_mux_init_signal("hsusb2_tll_stp",
-			OMAP_PIN_INPUT_PULLUP);
-		omap_mux_init_signal("hsusb2_tll_clk",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb2_tll_dir",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb2_tll_nxt",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb2_tll_data0",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb2_tll_data1",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb2_tll_data2",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb2_tll_data3",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb2_tll_data4",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb2_tll_data5",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb2_tll_data6",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb2_tll_data7",
-			OMAP_PIN_INPUT_PULLDOWN);
-		break;
-	case OMAP_USBHS_PORT_MODE_UNUSED:
-		/* FALLTHROUGH */
-	default:
-		break;
-	}
-
-	switch (port_mode[2]) {
-	case OMAP_EHCI_PORT_MODE_PHY:
-		printk(KERN_WARNING "Port3 can't be used in PHY mode\n");
-		break;
-	case OMAP_EHCI_PORT_MODE_TLL:
-		omap_mux_init_signal("hsusb3_tll_stp",
-			OMAP_PIN_INPUT_PULLUP);
-		omap_mux_init_signal("hsusb3_tll_clk",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb3_tll_dir",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb3_tll_nxt",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb3_tll_data0",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb3_tll_data1",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb3_tll_data2",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb3_tll_data3",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb3_tll_data4",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb3_tll_data5",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb3_tll_data6",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb3_tll_data7",
-			OMAP_PIN_INPUT_PULLDOWN);
-		break;
-	case OMAP_USBHS_PORT_MODE_UNUSED:
-		/* FALLTHROUGH */
-	default:
-		break;
-	}
-
-	return;
-}
-
-static void __init setup_ohci_io_mux(const enum usbhs_omap_port_mode *port_mode)
-{
-	switch (port_mode[0]) {
-	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
-	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
-	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
-	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
-		omap_mux_init_signal("mm1_rxdp",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("mm1_rxdm",
-			OMAP_PIN_INPUT_PULLDOWN);
-		/* FALLTHROUGH */
-	case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
-	case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
-		omap_mux_init_signal("mm1_rxrcv",
-			OMAP_PIN_INPUT_PULLDOWN);
-		/* FALLTHROUGH */
-	case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
-	case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
-		omap_mux_init_signal("mm1_txen_n", OMAP_PIN_OUTPUT);
-		/* FALLTHROUGH */
-	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
-	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
-		omap_mux_init_signal("mm1_txse0",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("mm1_txdat",
-			OMAP_PIN_INPUT_PULLDOWN);
-		break;
-	case OMAP_USBHS_PORT_MODE_UNUSED:
-		/* FALLTHROUGH */
-	default:
-		break;
-	}
-	switch (port_mode[1]) {
-	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
-	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
-	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
-	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
-		omap_mux_init_signal("mm2_rxdp",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("mm2_rxdm",
-			OMAP_PIN_INPUT_PULLDOWN);
-		/* FALLTHROUGH */
-	case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
-	case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
-		omap_mux_init_signal("mm2_rxrcv",
-			OMAP_PIN_INPUT_PULLDOWN);
-		/* FALLTHROUGH */
-	case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
-	case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
-		omap_mux_init_signal("mm2_txen_n", OMAP_PIN_OUTPUT);
-		/* FALLTHROUGH */
-	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
-	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
-		omap_mux_init_signal("mm2_txse0",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("mm2_txdat",
-			OMAP_PIN_INPUT_PULLDOWN);
-		break;
-	case OMAP_USBHS_PORT_MODE_UNUSED:
-		/* FALLTHROUGH */
-	default:
-		break;
-	}
-	switch (port_mode[2]) {
-	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
-	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
-	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
-	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
-		omap_mux_init_signal("mm3_rxdp",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("mm3_rxdm",
-			OMAP_PIN_INPUT_PULLDOWN);
-		/* FALLTHROUGH */
-	case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
-	case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
-		omap_mux_init_signal("mm3_rxrcv",
-			OMAP_PIN_INPUT_PULLDOWN);
-		/* FALLTHROUGH */
-	case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
-	case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
-		omap_mux_init_signal("mm3_txen_n", OMAP_PIN_OUTPUT);
-		/* FALLTHROUGH */
-	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
-	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
-		omap_mux_init_signal("mm3_txse0",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("mm3_txdat",
-			OMAP_PIN_INPUT_PULLDOWN);
-		break;
-	case OMAP_USBHS_PORT_MODE_UNUSED:
-		/* FALLTHROUGH */
-	default:
-		break;
-	}
-}
-
-void __init usbhs_init(struct usbhs_omap_platform_data *pdata)
-{
-	struct omap_hwmod	*uhh_hwm, *tll_hwm;
-	struct platform_device	*pdev;
-	int			bus_id = -1;
-
-	if (cpu_is_omap34xx()) {
-		setup_ehci_io_mux(pdata->port_mode);
-		setup_ohci_io_mux(pdata->port_mode);
-
-		if (omap_rev() <= OMAP3430_REV_ES2_1)
-			pdata->single_ulpi_bypass = true;
-
-	}
-
-	uhh_hwm = omap_hwmod_lookup(USBHS_UHH_HWMODNAME);
-	if (!uhh_hwm) {
-		pr_err("Could not look up %s\n", USBHS_UHH_HWMODNAME);
-		return;
-	}
-
-	tll_hwm = omap_hwmod_lookup(USBHS_TLL_HWMODNAME);
-	if (!tll_hwm) {
-		pr_err("Could not look up %s\n", USBHS_TLL_HWMODNAME);
-		return;
-	}
-
-	pdev = omap_device_build(OMAP_USBTLL_DEVICE, bus_id, tll_hwm,
-				pdata, sizeof(*pdata));
-	if (IS_ERR(pdev)) {
-		pr_err("Could not build hwmod device %s\n",
-		       USBHS_TLL_HWMODNAME);
-		return;
-	}
-
-	pdev = omap_device_build(OMAP_USBHS_DEVICE, bus_id, uhh_hwm,
-				pdata, sizeof(*pdata));
-	if (IS_ERR(pdev)) {
-		pr_err("Could not build hwmod devices %s\n",
-		       USBHS_UHH_HWMODNAME);
-		return;
-	}
-}
-
-#else
-
-void __init usbhs_init(struct usbhs_omap_platform_data *pdata)
-{
-}
-
-#endif
-
-/* Template for PHY regulators */
-static struct fixed_voltage_config hsusb_reg_config = {
-	/* .supply_name filled later */
-	.microvolts = 3300000,
-	.gpio = -1,		/* updated later */
-	.startup_delay = 70000, /* 70msec */
-	.enable_high = 1,	/* updated later */
-	.enabled_at_boot = 0,	/* keep in RESET */
-	/* .init_data filled later */
-};
-
-static const char *nop_name = "usb_phy_generic"; /* NOP PHY driver */
-static const char *reg_name = "reg-fixed-voltage"; /* Regulator driver */
-
-/**
- * usbhs_add_regulator - Add a gpio based fixed voltage regulator device
- * @name: name for the regulator
- * @dev_id: device id of the device this regulator supplies power to
- * @dev_supply: supply name that the device expects
- * @gpio: GPIO number
- * @polarity: 1 - Active high, 0 - Active low
- */
-static int usbhs_add_regulator(char *name, char *dev_id, char *dev_supply,
-						int gpio, int polarity)
-{
-	struct regulator_consumer_supply *supplies;
-	struct regulator_init_data *reg_data;
-	struct fixed_voltage_config *config;
-	struct platform_device *pdev;
-	struct platform_device_info pdevinfo;
-	int ret = -ENOMEM;
-
-	supplies = kzalloc(sizeof(*supplies), GFP_KERNEL);
-	if (!supplies)
-		return -ENOMEM;
-
-	supplies->supply = dev_supply;
-	supplies->dev_name = dev_id;
-
-	reg_data = kzalloc(sizeof(*reg_data), GFP_KERNEL);
-	if (!reg_data)
-		goto err_data;
-
-	reg_data->constraints.valid_ops_mask = REGULATOR_CHANGE_STATUS;
-	reg_data->consumer_supplies = supplies;
-	reg_data->num_consumer_supplies = 1;
-
-	config = kmemdup(&hsusb_reg_config, sizeof(hsusb_reg_config),
-			GFP_KERNEL);
-	if (!config)
-		goto err_config;
-
-	config->supply_name = kstrdup(name, GFP_KERNEL);
-	if (!config->supply_name)
-		goto err_supplyname;
-
-	config->gpio = gpio;
-	config->enable_high = polarity;
-	config->init_data = reg_data;
-
-	/* create a regulator device */
-	memset(&pdevinfo, 0, sizeof(pdevinfo));
-	pdevinfo.name = reg_name;
-	pdevinfo.id = PLATFORM_DEVID_AUTO;
-	pdevinfo.data = config;
-	pdevinfo.size_data = sizeof(*config);
-
-	pdev = platform_device_register_full(&pdevinfo);
-	if (IS_ERR(pdev)) {
-		ret = PTR_ERR(pdev);
-		pr_err("%s: Failed registering regulator %s for %s : %d\n",
-				__func__, name, dev_id, ret);
-		goto err_register;
-	}
-
-	return 0;
-
-err_register:
-	kfree(config->supply_name);
-err_supplyname:
-	kfree(config);
-err_config:
-	kfree(reg_data);
-err_data:
-	kfree(supplies);
-	return ret;
-}
-
-#define MAX_STR 20
-
-int usbhs_init_phys(struct usbhs_phy_data *phy, int num_phys)
-{
-	char rail_name[MAX_STR];
-	int i;
-	struct platform_device *pdev;
-	char *phy_id;
-	struct platform_device_info pdevinfo;
-	struct usb_phy_generic_platform_data nop_pdata;
-
-	for (i = 0; i < num_phys; i++) {
-
-		if (!phy->port) {
-			pr_err("%s: Invalid port 0. Must start from 1\n",
-						__func__);
-			continue;
-		}
-
-		/* do we need a NOP PHY device ? */
-		if (!gpio_is_valid(phy->reset_gpio) &&
-			!gpio_is_valid(phy->vcc_gpio))
-			continue;
-
-		phy_id = kmalloc(MAX_STR, GFP_KERNEL);
-		if (!phy_id) {
-			pr_err("%s: kmalloc() failed\n", __func__);
-			return -ENOMEM;
-		}
-
-		/* set platform data */
-		memset(&nop_pdata, 0, sizeof(nop_pdata));
-		if (gpio_is_valid(phy->vcc_gpio))
-			nop_pdata.needs_vcc = true;
-		nop_pdata.gpio_reset = phy->reset_gpio;
-		nop_pdata.type = USB_PHY_TYPE_USB2;
-
-		/* create a NOP PHY device */
-		memset(&pdevinfo, 0, sizeof(pdevinfo));
-		pdevinfo.name = nop_name;
-		pdevinfo.id = phy->port;
-		pdevinfo.data = &nop_pdata;
-		pdevinfo.size_data =
-			sizeof(struct usb_phy_generic_platform_data);
-		scnprintf(phy_id, MAX_STR, "usb_phy_generic.%d",
-					phy->port);
-		pdev = platform_device_register_full(&pdevinfo);
-		if (IS_ERR(pdev)) {
-			pr_err("%s: Failed to register device %s : %ld\n",
-				__func__,  phy_id, PTR_ERR(pdev));
-			kfree(phy_id);
-			continue;
-		}
-
-		usb_bind_phy("ehci-omap.0", phy->port - 1, phy_id);
-
-		/* Do we need VCC regulator ? */
-		if (gpio_is_valid(phy->vcc_gpio)) {
-			scnprintf(rail_name, MAX_STR, "hsusb%d_vcc", phy->port);
-			usbhs_add_regulator(rail_name, phy_id, "vcc",
-					phy->vcc_gpio, phy->vcc_polarity);
-		}
-
-		phy++;
-	}
-
-	return 0;
-}

arch/arm/mach-omap2/usb-musb.c

@@ -1,106 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/usb-musb.c
- *
- * This file will contain the board specific details for the
- * MENTOR USB OTG controller on OMAP3430
- *
- * Copyright (C) 2007-2008 Texas Instruments
- * Copyright (C) 2008 Nokia Corporation
- * Author: Vikram Pandita
- *
- * Generalization by:
- * Felipe Balbi <felipe.balbi@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <linux/dma-mapping.h>
-#include <linux/io.h>
-#include <linux/usb/musb.h>
-
-#include "omap_device.h"
-#include "soc.h"
-#include "mux.h"
-#include "usb.h"
-
-static struct musb_hdrc_config musb_config = {
-	.multipoint	= 1,
-	.dyn_fifo	= 1,
-	.num_eps	= 16,
-	.ram_bits	= 12,
-};
-
-static struct musb_hdrc_platform_data musb_plat = {
-	.mode		= MUSB_OTG,
-
-	/* .clock is set dynamically */
-	.config		= &musb_config,
-
-	/* REVISIT charge pump on TWL4030 can supply up to
-	 * 100 mA ... but this value is board-specific, like
-	 * "mode", and should be passed to usb_musb_init().
-	 */
-	.power		= 50,			/* up to 100 mA */
-};
-
-static u64 musb_dmamask = DMA_BIT_MASK(32);
-
-static struct omap_musb_board_data musb_default_board_data = {
-	.interface_type		= MUSB_INTERFACE_ULPI,
-	.mode			= MUSB_OTG,
-	.power			= 100,
-};
-
-void __init usb_musb_init(struct omap_musb_board_data *musb_board_data)
-{
-	struct omap_hwmod		*oh;
-	struct platform_device		*pdev;
-	struct device			*dev;
-	int				bus_id = -1;
-	const char			*oh_name, *name;
-	struct omap_musb_board_data	*board_data;
-
-	if (musb_board_data)
-		board_data = musb_board_data;
-	else
-		board_data = &musb_default_board_data;
-
-	/*
-	 * REVISIT: This line can be removed once all the platforms using
-	 * musb_core.c have been converted to use use clkdev.
-	 */
-	musb_plat.clock = "ick";
-	musb_plat.board_data = board_data;
-	musb_plat.power = board_data->power >> 1;
-	musb_plat.mode = board_data->mode;
-	musb_plat.extvbus = board_data->extvbus;
-
-	oh_name = "usb_otg_hs";
-	name = "musb-omap2430";
-
-        oh = omap_hwmod_lookup(oh_name);
-        if (WARN(!oh, "%s: could not find omap_hwmod for %s\n",
-                 __func__, oh_name))
-                return;
-
-	pdev = omap_device_build(name, bus_id, oh, &musb_plat,
-				 sizeof(musb_plat));
-	if (IS_ERR(pdev)) {
-		pr_err("Could not build omap_device for %s %s\n",
-						name, oh_name);
-		return;
-	}
-
-	dev = &pdev->dev;
-	get_device(dev);
-	dev->dma_mask = &musb_dmamask;
-	dev->coherent_dma_mask = musb_dmamask;
-	put_device(dev);
-}

arch/arm/mach-omap2/usb-tusb6010.c

@@ -22,8 +22,6 @@
 
 #include "gpmc.h"
 
-#include "mux.h"
-
 static u8		async_cs, sync_cs;
 static unsigned		refclk_psec;
 
@@ -226,25 +224,6 @@ tusb6010_setup_interface(struct musb_hdrc_platform_data *data,
 	}
 	tusb_device.dev.platform_data = data;
 
-	/* REVISIT let the driver know what DMA channels work */
-	if (!dmachan)
-		tusb_device.dev.dma_mask = NULL;
-	else {
-		/* assume OMAP 2420 ES2.0 and later */
-		if (dmachan & (1 << 0))
-			omap_mux_init_signal("sys_ndmareq0", 0);
-		if (dmachan & (1 << 1))
-			omap_mux_init_signal("sys_ndmareq1", 0);
-		if (dmachan & (1 << 2))
-			omap_mux_init_signal("sys_ndmareq2", 0);
-		if (dmachan & (1 << 3))
-			omap_mux_init_signal("sys_ndmareq3", 0);
-		if (dmachan & (1 << 4))
-			omap_mux_init_signal("sys_ndmareq4", 0);
-		if (dmachan & (1 << 5))
-			omap_mux_init_signal("sys_ndmareq5", 0);
-	}
-
 	/* so far so good ... register the device */
 	status = platform_device_register(&tusb_device);
 	if (status < 0) {

arch/arm/mach-orion5x/Kconfig

@@ -84,13 +84,6 @@ config MACH_LINKSTATION_PRO
 	  Buffalo Linkstation Pro/Live platform. Both v1 and
 	  v2 devices are supported.
 
-config MACH_LINKSTATION_LSCHL
-	bool "Buffalo Linkstation Live v3 (LS-CHL)"
-	select I2C_BOARDINFO if I2C
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Buffalo Linkstation Live v3 (LS-CHL) platform.
-
 config MACH_LINKSTATION_MINI
 	bool "Buffalo Linkstation Mini (Flattened Device Tree)"
 	select ARCH_ORION5X_DT

arch/arm/mach-orion5x/Makefile

@@ -18,7 +18,6 @@ obj-$(CONFIG_MACH_WNR854T)	+= wnr854t-setup.o
 obj-$(CONFIG_MACH_RD88F5181L_GE)	+= rd88f5181l-ge-setup.o
 obj-$(CONFIG_MACH_RD88F5181L_FXO)	+= rd88f5181l-fxo-setup.o
 obj-$(CONFIG_MACH_RD88F6183AP_GE)	+= rd88f6183ap-ge-setup.o
-obj-$(CONFIG_MACH_LINKSTATION_LSCHL)	+= ls-chl-setup.o
 
 obj-$(CONFIG_ARCH_ORION5X_DT)		+= board-dt.o
 obj-$(CONFIG_MACH_D2NET_DT)	+= board-d2net.o

arch/arm/mach-orion5x/ls-chl-setup.c

@@ -1,331 +0,0 @@
-/*
- * arch/arm/mach-orion5x/ls-chl-setup.c
- *
- * Maintainer: Ash Hughes <ashley.hughes@blueyonder.co.uk>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/leds.h>
-#include <linux/gpio_keys.h>
-#include <linux/gpio-fan.h>
-#include <linux/input.h>
-#include <linux/i2c.h>
-#include <linux/ata_platform.h>
-#include <linux/gpio.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include "common.h"
-#include "mpp.h"
-#include "orion5x.h"
-
-/*****************************************************************************
- * Linkstation LS-CHL Info
- ****************************************************************************/
-
-/*
- * 256K NOR flash Device bus boot chip select
- */
-
-#define LSCHL_NOR_BOOT_BASE	0xf4000000
-#define LSCHL_NOR_BOOT_SIZE	SZ_256K
-
-/*****************************************************************************
- * 256KB NOR Flash on BOOT Device
- ****************************************************************************/
-
-static struct physmap_flash_data lschl_nor_flash_data = {
-	.width = 1,
-};
-
-static struct resource lschl_nor_flash_resource = {
-	.flags	= IORESOURCE_MEM,
-	.start	= LSCHL_NOR_BOOT_BASE,
-	.end	= LSCHL_NOR_BOOT_BASE + LSCHL_NOR_BOOT_SIZE - 1,
-};
-
-static struct platform_device lschl_nor_flash = {
-	.name = "physmap-flash",
-	.id = 0,
-	.dev = {
-		.platform_data	= &lschl_nor_flash_data,
-	},
-	.num_resources = 1,
-	.resource = &lschl_nor_flash_resource,
-};
-
-/*****************************************************************************
- * Ethernet
- ****************************************************************************/
-
-static struct mv643xx_eth_platform_data lschl_eth_data = {
-	.phy_addr = MV643XX_ETH_PHY_ADDR(8),
-};
-
-/*****************************************************************************
- * RTC 5C372a on I2C bus
- ****************************************************************************/
-
-static struct i2c_board_info __initdata lschl_i2c_rtc = {
-	I2C_BOARD_INFO("rs5c372a", 0x32),
-};
-
-/*****************************************************************************
- * LEDs attached to GPIO
- ****************************************************************************/
-
-#define LSCHL_GPIO_LED_ALARM	2
-#define LSCHL_GPIO_LED_INFO	3
-#define LSCHL_GPIO_LED_FUNC	17
-#define LSCHL_GPIO_LED_PWR	0
-
-static struct gpio_led lschl_led_pins[] = {
-	{
-		.name = "alarm:red",
-		.gpio = LSCHL_GPIO_LED_ALARM,
-		.active_low = 1,
-	}, {
-		.name = "info:amber",
-		.gpio = LSCHL_GPIO_LED_INFO,
-		.active_low = 1,
-	}, {
-		.name = "func:blue:top",
-		.gpio = LSCHL_GPIO_LED_FUNC,
-		.active_low = 1,
-	}, {
-		.name = "power:blue:bottom",
-		.gpio = LSCHL_GPIO_LED_PWR,
-	},
-};
-
-static struct gpio_led_platform_data lschl_led_data = {
-	.leds = lschl_led_pins,
-	.num_leds = ARRAY_SIZE(lschl_led_pins),
-};
-
-static struct platform_device lschl_leds = {
-	.name = "leds-gpio",
-	.id = -1,
-	.dev = {
-		.platform_data = &lschl_led_data,
-	},
-};
-
-/*****************************************************************************
- * SATA
- ****************************************************************************/
-static struct mv_sata_platform_data lschl_sata_data = {
-	.n_ports = 2,
-};
-
-/*****************************************************************************
- * LS-CHL specific power off method: reboot
- ****************************************************************************/
-/*
- * On the LS-CHL, the shutdown process is following:
- * - Userland monitors key events until the power switch goes to off position
- * - The board reboots
- * - U-boot starts and goes into an idle mode waiting for the user
- *   to move the switch to ON position
- *
- */
-
-static void lschl_power_off(void)
-{
-	orion5x_restart(REBOOT_HARD, NULL);
-}
-
-/*****************************************************************************
- * General Setup
- ****************************************************************************/
-#define LSCHL_GPIO_USB_POWER	9
-#define LSCHL_GPIO_AUTO_POWER	17
-#define LSCHL_GPIO_POWER	18
-
-/****************************************************************************
- * GPIO Attached Keys
- ****************************************************************************/
-#define LSCHL_GPIO_KEY_FUNC		15
-#define LSCHL_GPIO_KEY_POWER		8
-#define LSCHL_GPIO_KEY_AUTOPOWER	10
-#define LSCHL_SW_POWER		0x00
-#define LSCHL_SW_AUTOPOWER	0x01
-#define LSCHL_SW_FUNC		0x02
-
-static struct gpio_keys_button lschl_buttons[] = {
-	{
-		.type = EV_SW,
-		.code = LSCHL_SW_POWER,
-		.gpio = LSCHL_GPIO_KEY_POWER,
-		.desc = "Power-on Switch",
-		.active_low = 1,
-	}, {
-		.type = EV_SW,
-		.code = LSCHL_SW_AUTOPOWER,
-		.gpio = LSCHL_GPIO_KEY_AUTOPOWER,
-		.desc = "Power-auto Switch",
-		.active_low = 1,
-	}, {
-		.type = EV_SW,
-		.code = LSCHL_SW_FUNC,
-		.gpio = LSCHL_GPIO_KEY_FUNC,
-		.desc = "Function Switch",
-		.active_low = 1,
-	},
-};
-
-static struct gpio_keys_platform_data lschl_button_data = {
-	.buttons = lschl_buttons,
-	.nbuttons = ARRAY_SIZE(lschl_buttons),
-};
-
-static struct platform_device lschl_button_device = {
-	.name = "gpio-keys",
-	.id = -1,
-	.num_resources = 0,
-	.dev = {
-		.platform_data = &lschl_button_data,
-	},
-};
-
-#define LSCHL_GPIO_HDD_POWER	1
-
-/****************************************************************************
- * GPIO Fan
- ****************************************************************************/
-
-#define LSCHL_GPIO_FAN_LOW	16
-#define LSCHL_GPIO_FAN_HIGH	14
-#define LSCHL_GPIO_FAN_LOCK	6
-
-static struct gpio_fan_alarm lschl_alarm = {
-	.gpio = LSCHL_GPIO_FAN_LOCK,
-};
-
-static struct gpio_fan_speed lschl_speeds[] = {
-	{
-		.rpm = 0,
-		.ctrl_val = 3,
-	}, {
-		.rpm = 1500,
-		.ctrl_val = 2,
-	}, {
-		.rpm = 3250,
-		.ctrl_val = 1,
-	}, {
-		.rpm = 5000,
-		.ctrl_val = 0,
-	},
-};
-
-static int lschl_gpio_list[] = {
-	LSCHL_GPIO_FAN_HIGH, LSCHL_GPIO_FAN_LOW,
-};
-
-static struct gpio_fan_platform_data lschl_fan_data = {
-	.num_ctrl = ARRAY_SIZE(lschl_gpio_list),
-	.ctrl = lschl_gpio_list,
-	.alarm = &lschl_alarm,
-	.num_speed = ARRAY_SIZE(lschl_speeds),
-	.speed = lschl_speeds,
-};
-
-static struct platform_device lschl_fan_device = {
-	.name = "gpio-fan",
-	.id = -1,
-	.num_resources = 0,
-	.dev = {
-		.platform_data = &lschl_fan_data,
-	},
-};
-
-/****************************************************************************
- * GPIO Data
- ****************************************************************************/
-
-static unsigned int lschl_mpp_modes[] __initdata = {
-	MPP0_GPIO, /* LED POWER */
-	MPP1_GPIO, /* HDD POWER */
-	MPP2_GPIO, /* LED ALARM */
-	MPP3_GPIO, /* LED INFO */
-	MPP4_UNUSED,
-	MPP5_UNUSED,
-	MPP6_GPIO, /* FAN LOCK */
-	MPP7_GPIO, /* SW INIT */
-	MPP8_GPIO, /* SW POWER */
-	MPP9_GPIO, /* USB POWER */
-	MPP10_GPIO, /* SW AUTO POWER */
-	MPP11_UNUSED,
-	MPP12_UNUSED,
-	MPP13_UNUSED,
-	MPP14_GPIO, /* FAN HIGH */
-	MPP15_GPIO, /* SW FUNC */
-	MPP16_GPIO, /* FAN LOW */
-	MPP17_GPIO, /* LED FUNC */
-	MPP18_UNUSED,
-	MPP19_UNUSED,
-	0,
-};
-
-static void __init lschl_init(void)
-{
-	/*
-	 * Setup basic Orion functions. Needs to be called early.
-	 */
-	orion5x_init();
-
-	orion5x_mpp_conf(lschl_mpp_modes);
-
-	/*
-	 * Configure peripherals.
-	 */
-	orion5x_ehci0_init();
-	orion5x_ehci1_init();
-	orion5x_eth_init(&lschl_eth_data);
-	orion5x_i2c_init();
-	orion5x_sata_init(&lschl_sata_data);
-	orion5x_uart0_init();
-	orion5x_xor_init();
-
-	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
-				    ORION_MBUS_DEVBUS_BOOT_ATTR,
-				    LSCHL_NOR_BOOT_BASE,
-				    LSCHL_NOR_BOOT_SIZE);
-	platform_device_register(&lschl_nor_flash);
-
-	platform_device_register(&lschl_leds);
-
-	platform_device_register(&lschl_button_device);
-
-	platform_device_register(&lschl_fan_device);
-
-	i2c_register_board_info(0, &lschl_i2c_rtc, 1);
-
-	/* usb power on */
-	gpio_set_value(LSCHL_GPIO_USB_POWER, 1);
-
-	/* register power-off method */
-	pm_power_off = lschl_power_off;
-
-	pr_info("%s: finished\n", __func__);
-}
-
-MACHINE_START(LINKSTATION_LSCHL, "Buffalo Linkstation LiveV3 (LS-CHL)")
-	/* Maintainer: Ash Hughes <ashley.hughes@blueyonder.co.uk> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= ORION5X_NR_IRQS,
-	.init_machine	= lschl_init,
-	.map_io		= orion5x_map_io,
-	.init_early	= orion5x_init_early,
-	.init_irq	= orion5x_init_irq,
-	.init_time	= orion5x_timer_init,
-	.fixup		= tag_fixup_mem32,
-	.restart	= orion5x_restart,
-MACHINE_END

arch/arm/mach-oxnas/Kconfig

@@ -1,9 +1,16 @@
 menuconfig ARCH_OXNAS
 	bool "Oxford Semiconductor OXNAS Family SoCs"
 	select ARCH_HAS_RESET_CONTROLLER
+	select COMMON_CLK_OXNAS
 	select GPIOLIB
+	select MFD_SYSCON
+	select OXNAS_RPS_TIMER
+	select PINCTRL_OXNAS
+	select RESET_CONTROLLER
+	select RESET_OXNAS
+	select VERSATILE_FPGA_IRQ
 	select PINCTRL
-	depends on ARCH_MULTI_V5
+	depends on ARCH_MULTI_V5 || ARCH_MULTI_V6
 	help
 	  Support for OxNas SoC family developed by Oxford Semiconductor.
 
@@ -11,16 +18,21 @@ if ARCH_OXNAS
 
 config MACH_OX810SE
 	bool "Support OX810SE Based Products"
-	select ARCH_HAS_RESET_CONTROLLER
-	select COMMON_CLK_OXNAS
+	depends on ARCH_MULTI_V5
 	select CPU_ARM926T
-	select MFD_SYSCON
-	select OXNAS_RPS_TIMER
-	select PINCTRL_OXNAS
-	select RESET_CONTROLLER
-	select RESET_OXNAS
-	select VERSATILE_FPGA_IRQ
 	help
 	  Include Support for the Oxford Semiconductor OX810SE SoC Based Products.
 
+config MACH_OX820
+	bool "Support OX820 Based Products"
+	depends on ARCH_MULTI_V6
+	select ARM_GIC
+	select DMA_CACHE_RWFO if SMP
+	select CPU_V6K
+	select HAVE_SMP
+	select HAVE_ARM_SCU if SMP
+	select HAVE_ARM_TWD if SMP
+	help
+	  Include Support for the Oxford Semiconductor OX820 SoC Based Products.
+
 endif

arch/arm/mach-oxnas/Makefile

@@ -0,0 +1,2 @@
+obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o
+obj-$(CONFIG_HOTPLUG_CPU) 	+= hotplug.o

arch/arm/mach-oxnas/headsmp.S

@@ -0,0 +1,26 @@
+/*
+ * Copyright (C) 2013 Ma Haijun <mahaijuns@gmail.com>
+ * Copyright (c) 2003 ARM Limited
+ * All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+
+	__INIT
+
+/*
+ * OX820 specific entry point for secondary CPUs.
+ */
+ENTRY(ox820_secondary_startup)
+	mov r4, #0
+	/* invalidate both caches and branch target cache */
+	mcr p15, 0, r4, c7, c7, 0
+	/*
+	 * we've been released from the holding pen: secondary_stack
+	 * should now contain the SVC stack for this core
+	 */
+	b	secondary_startup

arch/arm/mach-oxnas/hotplug.c

@@ -0,0 +1,109 @@
+/*
+ *  Copyright (C) 2002 ARM Ltd.
+ *  All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/smp.h>
+
+#include <asm/cp15.h>
+#include <asm/smp_plat.h>
+
+static inline void cpu_enter_lowpower(void)
+{
+	unsigned int v;
+
+	asm volatile(
+	"	mcr	p15, 0, %1, c7, c5, 0\n"
+	"	mcr	p15, 0, %1, c7, c10, 4\n"
+	/*
+	 * Turn off coherency
+	 */
+	"	mrc	p15, 0, %0, c1, c0, 1\n"
+	"	bic	%0, %0, #0x20\n"
+	"	mcr	p15, 0, %0, c1, c0, 1\n"
+	"	mrc	p15, 0, %0, c1, c0, 0\n"
+	"	bic	%0, %0, %2\n"
+	"	mcr	p15, 0, %0, c1, c0, 0\n"
+	  : "=&r" (v)
+	  : "r" (0), "Ir" (CR_C)
+	  : "cc");
+}
+
+static inline void cpu_leave_lowpower(void)
+{
+	unsigned int v;
+
+	asm volatile(	"mrc	p15, 0, %0, c1, c0, 0\n"
+	"	orr	%0, %0, %1\n"
+	"	mcr	p15, 0, %0, c1, c0, 0\n"
+	"	mrc	p15, 0, %0, c1, c0, 1\n"
+	"	orr	%0, %0, #0x20\n"
+	"	mcr	p15, 0, %0, c1, c0, 1\n"
+	  : "=&r" (v)
+	  : "Ir" (CR_C)
+	  : "cc");
+}
+
+static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
+{
+	/*
+	 * there is no power-control hardware on this platform, so all
+	 * we can do is put the core into WFI; this is safe as the calling
+	 * code will have already disabled interrupts
+	 */
+	for (;;) {
+		/*
+		 * here's the WFI
+		 */
+		asm(".word	0xe320f003\n"
+		    :
+		    :
+		    : "memory", "cc");
+
+		if (pen_release == cpu_logical_map(cpu)) {
+			/*
+			 * OK, proper wakeup, we're done
+			 */
+			break;
+		}
+
+		/*
+		 * Getting here, means that we have come out of WFI without
+		 * having been woken up - this shouldn't happen
+		 *
+		 * Just note it happening - when we're woken, we can report
+		 * its occurrence.
+		 */
+		(*spurious)++;
+	}
+}
+
+/*
+ * platform-specific code to shutdown a CPU
+ *
+ * Called with IRQs disabled
+ */
+void ox820_cpu_die(unsigned int cpu)
+{
+	int spurious = 0;
+
+	/*
+	 * we're ready for shutdown now, so do it
+	 */
+	cpu_enter_lowpower();
+	platform_do_lowpower(cpu, &spurious);
+
+	/*
+	 * bring this CPU back into the world of cache
+	 * coherency, and then restore interrupts
+	 */
+	cpu_leave_lowpower();
+
+	if (spurious)
+		pr_warn("CPU%u: %u spurious wakeup calls\n", cpu, spurious);
+}

arch/arm/mach-oxnas/platsmp.c

@@ -0,0 +1,102 @@
+/*
+ * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com>
+ * Copyright (C) 2013 Ma Haijun <mahaijuns@gmail.com>
+ * Copyright (C) 2002 ARM Ltd.
+ * All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include <asm/cacheflush.h>
+#include <asm/cp15.h>
+#include <asm/smp_plat.h>
+#include <asm/smp_scu.h>
+
+extern void ox820_secondary_startup(void);
+extern void ox820_cpu_die(unsigned int cpu);
+
+static void __iomem *cpu_ctrl;
+static void __iomem *gic_cpu_ctrl;
+
+#define HOLDINGPEN_CPU_OFFSET		0xc8
+#define HOLDINGPEN_LOCATION_OFFSET	0xc4
+
+#define GIC_NCPU_OFFSET(cpu)		(0x100 + (cpu)*0x100)
+#define GIC_CPU_CTRL			0x00
+#define GIC_CPU_CTRL_ENABLE		1
+
+int __init ox820_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	/*
+	 * Write the address of secondary startup into the
+	 * system-wide flags register. The BootMonitor waits
+	 * until it receives a soft interrupt, and then the
+	 * secondary CPU branches to this address.
+	 */
+	writel(virt_to_phys(ox820_secondary_startup),
+			cpu_ctrl + HOLDINGPEN_LOCATION_OFFSET);
+
+	writel(cpu, cpu_ctrl + HOLDINGPEN_CPU_OFFSET);
+
+	/*
+	 * Enable GIC cpu interface in CPU Interface Control Register
+	 */
+	writel(GIC_CPU_CTRL_ENABLE,
+		gic_cpu_ctrl + GIC_NCPU_OFFSET(cpu) + GIC_CPU_CTRL);
+
+	/*
+	 * Send the secondary CPU a soft interrupt, thereby causing
+	 * the boot monitor to read the system wide flags register,
+	 * and branch to the address found there.
+	 */
+	arch_send_wakeup_ipi_mask(cpumask_of(cpu));
+
+	return 0;
+}
+
+static void __init ox820_smp_prepare_cpus(unsigned int max_cpus)
+{
+	struct device_node *np;
+	void __iomem *scu_base;
+
+	np = of_find_compatible_node(NULL, NULL, "arm,arm11mp-scu");
+	scu_base = of_iomap(np, 0);
+	of_node_put(np);
+	if (!scu_base)
+		return;
+
+	/* Remap CPU Interrupt Interface Registers */
+	np = of_find_compatible_node(NULL, NULL, "arm,arm11mp-gic");
+	gic_cpu_ctrl = of_iomap(np, 1);
+	of_node_put(np);
+	if (!gic_cpu_ctrl)
+		goto unmap_scu;
+
+	np = of_find_compatible_node(NULL, NULL, "oxsemi,ox820-sys-ctrl");
+	cpu_ctrl = of_iomap(np, 0);
+	of_node_put(np);
+	if (!cpu_ctrl)
+		goto unmap_scu;
+
+	scu_enable(scu_base);
+	flush_cache_all();
+
+unmap_scu:
+	iounmap(scu_base);
+}
+
+static const struct smp_operations ox820_smp_ops __initconst = {
+	.smp_prepare_cpus	= ox820_smp_prepare_cpus,
+	.smp_boot_secondary	= ox820_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_die		= ox820_cpu_die,
+#endif
+};
+
+CPU_METHOD_OF_DECLARE(ox820_smp, "oxsemi,ox820-smp", &ox820_smp_ops);

arch/arm/mach-pxa/corgi.c

@@ -35,7 +35,6 @@
 #include <linux/mtd/sharpsl.h>
 #include <linux/input/matrix_keypad.h>
 #include <linux/gpio_keys.h>
-#include <linux/module.h>
 #include <linux/memblock.h>
 #include <video/w100fb.h>
 

arch/arm/mach-pxa/em-x270.c

@@ -23,6 +23,7 @@
 #include <linux/gpio.h>
 #include <linux/mfd/da903x.h>
 #include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/tdo24m.h>
 #include <linux/spi/libertas_spi.h>
@@ -34,8 +35,6 @@
 #include <linux/i2c/pxa-i2c.h>
 #include <linux/regulator/userspace-consumer.h>
 
-#include <media/soc_camera.h>
-
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
@@ -958,8 +957,6 @@ static inline void em_x270_init_gpio_keys(void) {}
 
 /* Quick Capture Interface and sensor setup */
 #if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE)
-static struct regulator *em_x270_camera_ldo;
-
 static int em_x270_sensor_init(void)
 {
 	int ret;
@@ -969,81 +966,53 @@ static int em_x270_sensor_init(void)
 		return ret;
 
 	gpio_direction_output(cam_reset, 0);
-
-	em_x270_camera_ldo = regulator_get(NULL, "vcc cam");
-	if (em_x270_camera_ldo == NULL) {
-		gpio_free(cam_reset);
-		return -ENODEV;
-	}
-
-	ret = regulator_enable(em_x270_camera_ldo);
-	if (ret) {
-		regulator_put(em_x270_camera_ldo);
-		gpio_free(cam_reset);
-		return ret;
-	}
-
 	gpio_set_value(cam_reset, 1);
 
 	return 0;
 }
 
-struct pxacamera_platform_data em_x270_camera_platform_data = {
-	.flags  = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
-		PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
-	.mclk_10khz = 2600,
+static struct regulator_consumer_supply camera_dummy_supplies[] = {
+	REGULATOR_SUPPLY("vdd", "0-005d"),
 };
 
-static int em_x270_sensor_power(struct device *dev, int on)
-{
-	int ret;
-	int is_on = regulator_is_enabled(em_x270_camera_ldo);
-
-	if (on == is_on)
-		return 0;
-
-	gpio_set_value(cam_reset, !on);
-
-	if (on)
-		ret = regulator_enable(em_x270_camera_ldo);
-	else
-		ret = regulator_disable(em_x270_camera_ldo);
-
-	if (ret)
-		return ret;
-
-	gpio_set_value(cam_reset, on);
-
-	return 0;
-}
-
-static struct i2c_board_info em_x270_i2c_cam_info[] = {
-	{
-		I2C_BOARD_INFO("mt9m111", 0x48),
+static struct regulator_init_data camera_dummy_initdata = {
+	.consumer_supplies = camera_dummy_supplies,
+	.num_consumer_supplies = ARRAY_SIZE(camera_dummy_supplies),
+	.constraints = {
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
 	},
 };
 
-static struct soc_camera_link iclink = {
-	.bus_id		= 0,
-	.power		= em_x270_sensor_power,
-	.board_info	= &em_x270_i2c_cam_info[0],
-	.i2c_adapter_id	= 0,
+static struct fixed_voltage_config camera_dummy_config = {
+	.supply_name		= "camera_vdd",
+	.input_supply		= "vcc cam",
+	.microvolts		= 2800000,
+	.gpio			= -1,
+	.enable_high		= 0,
+	.init_data		= &camera_dummy_initdata,
 };
 
-static struct platform_device em_x270_camera = {
-	.name	= "soc-camera-pdrv",
-	.id	= -1,
+static struct platform_device camera_supply_dummy_device = {
+	.name	= "reg-fixed-voltage",
+	.id	= 1,
 	.dev	= {
-		.platform_data = &iclink,
+		.platform_data = &camera_dummy_config,
 	},
 };
 
+struct pxacamera_platform_data em_x270_camera_platform_data = {
+	.flags  = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
+		PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
+	.mclk_10khz = 2600,
+	.sensor_i2c_adapter_id = 0,
+	.sensor_i2c_address = 0x5d,
+};
+
 static void  __init em_x270_init_camera(void)
 {
-	if (em_x270_sensor_init() == 0) {
+	if (em_x270_sensor_init() == 0)
 		pxa_set_camera_info(&em_x270_camera_platform_data);
-		platform_device_register(&em_x270_camera);
-	}
+	platform_device_register(&camera_supply_dummy_device);
 }
 #else
 static inline void em_x270_init_camera(void) {}

arch/arm/mach-pxa/ezx.c

@@ -17,14 +17,14 @@
 #include <linux/delay.h>
 #include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
 #include <linux/input.h>
 #include <linux/gpio.h>
 #include <linux/gpio_keys.h>
 #include <linux/leds-lp3944.h>
 #include <linux/i2c/pxa-i2c.h>
 
-#include <media/soc_camera.h>
-
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -723,6 +723,42 @@ static struct platform_device a780_gpio_keys = {
 };
 
 /* camera */
+static struct regulator_consumer_supply camera_dummy_supplies[] = {
+	REGULATOR_SUPPLY("vdd", "0-005d"),
+};
+
+static struct regulator_init_data camera_dummy_initdata = {
+	.consumer_supplies = camera_dummy_supplies,
+	.num_consumer_supplies = ARRAY_SIZE(camera_dummy_supplies),
+	.constraints = {
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct fixed_voltage_config camera_dummy_config = {
+	.supply_name		= "camera_vdd",
+	.microvolts		= 2800000,
+	.gpio			= GPIO50_nCAM_EN,
+	.enable_high		= 0,
+	.init_data		= &camera_dummy_initdata,
+};
+
+static struct platform_device camera_supply_dummy_device = {
+	.name	= "reg-fixed-voltage",
+	.id	= 1,
+	.dev	= {
+		.platform_data = &camera_dummy_config,
+	},
+};
+static int a780_camera_reset(struct device *dev)
+{
+	gpio_set_value(GPIO19_GEN1_CAM_RST, 0);
+	msleep(10);
+	gpio_set_value(GPIO19_GEN1_CAM_RST, 1);
+
+	return 0;
+}
+
 static int a780_camera_init(void)
 {
 	int err;
@@ -731,73 +767,36 @@ static int a780_camera_init(void)
 	 * GPIO50_nCAM_EN is active low
 	 * GPIO19_GEN1_CAM_RST is active on rising edge
 	 */
-	err = gpio_request(GPIO50_nCAM_EN, "nCAM_EN");
-	if (err) {
-		pr_err("%s: Failed to request nCAM_EN\n", __func__);
-		goto fail;
-	}
-
 	err = gpio_request(GPIO19_GEN1_CAM_RST, "CAM_RST");
 	if (err) {
 		pr_err("%s: Failed to request CAM_RST\n", __func__);
-		goto fail_gpio_cam_rst;
+		return err;
 	}
 
-	gpio_direction_output(GPIO50_nCAM_EN, 1);
 	gpio_direction_output(GPIO19_GEN1_CAM_RST, 0);
-
-	return 0;
-
-fail_gpio_cam_rst:
-	gpio_free(GPIO50_nCAM_EN);
-fail:
-	return err;
-}
-
-static int a780_camera_power(struct device *dev, int on)
-{
-	gpio_set_value(GPIO50_nCAM_EN, !on);
-	return 0;
-}
-
-static int a780_camera_reset(struct device *dev)
-{
-	gpio_set_value(GPIO19_GEN1_CAM_RST, 0);
-	msleep(10);
-	gpio_set_value(GPIO19_GEN1_CAM_RST, 1);
+	a780_camera_reset(NULL);
 
 	return 0;
 }
 
 struct pxacamera_platform_data a780_pxacamera_platform_data = {
 	.flags  = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
-		PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
+		PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN |
+		PXA_CAMERA_PCP,
 	.mclk_10khz = 5000,
+	.sensor_i2c_adapter_id = 0,
+	.sensor_i2c_address = 0x5d,
 };
 
-static struct i2c_board_info a780_camera_i2c_board_info = {
-	I2C_BOARD_INFO("mt9m111", 0x5d),
-};
-
-static struct soc_camera_link a780_iclink = {
-	.bus_id         = 0,
-	.flags          = SOCAM_SENSOR_INVERT_PCLK,
-	.i2c_adapter_id = 0,
-	.board_info     = &a780_camera_i2c_board_info,
-	.power          = a780_camera_power,
-	.reset          = a780_camera_reset,
-};
-
-static struct platform_device a780_camera = {
-	.name   = "soc-camera-pdrv",
-	.id     = 0,
-	.dev    = {
-		.platform_data = &a780_iclink,
+static struct i2c_board_info a780_i2c_board_info[] = {
+	{
+		I2C_BOARD_INFO("mt9m111", 0x5d),
 	},
 };
 
 static struct platform_device *a780_devices[] __initdata = {
 	&a780_gpio_keys,
+	&camera_supply_dummy_device,
 };
 
 static void __init a780_init(void)
@@ -811,19 +810,19 @@ static void __init a780_init(void)
 	pxa_set_stuart_info(NULL);
 
 	pxa_set_i2c_info(NULL);
+	i2c_register_board_info(0, ARRAY_AND_SIZE(a780_i2c_board_info));
 
 	pxa_set_fb_info(NULL, &ezx_fb_info_1);
 
 	pxa_set_keypad_info(&a780_keypad_platform_data);
 
-	if (a780_camera_init() == 0) {
+	if (a780_camera_init() == 0)
 		pxa_set_camera_info(&a780_pxacamera_platform_data);
-		platform_device_register(&a780_camera);
-	}
 
 	pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup));
 	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
 	platform_add_devices(ARRAY_AND_SIZE(a780_devices));
+	regulator_has_full_constraints();
 }
 
 MACHINE_START(EZX_A780, "Motorola EZX A780")
@@ -1001,6 +1000,15 @@ static struct platform_device a910_gpio_keys = {
 };
 
 /* camera */
+static int a910_camera_reset(struct device *dev)
+{
+	gpio_set_value(GPIO28_GEN2_CAM_RST, 0);
+	msleep(10);
+	gpio_set_value(GPIO28_GEN2_CAM_RST, 1);
+
+	return 0;
+}
+
 static int a910_camera_init(void)
 {
 	int err;
@@ -1009,68 +1017,25 @@ static int a910_camera_init(void)
 	 * GPIO50_nCAM_EN is active low
 	 * GPIO28_GEN2_CAM_RST is active on rising edge
 	 */
-	err = gpio_request(GPIO50_nCAM_EN, "nCAM_EN");
-	if (err) {
-		pr_err("%s: Failed to request nCAM_EN\n", __func__);
-		goto fail;
-	}
-
 	err = gpio_request(GPIO28_GEN2_CAM_RST, "CAM_RST");
 	if (err) {
 		pr_err("%s: Failed to request CAM_RST\n", __func__);
-		goto fail_gpio_cam_rst;
+		return err;
 	}
 
-	gpio_direction_output(GPIO50_nCAM_EN, 1);
 	gpio_direction_output(GPIO28_GEN2_CAM_RST, 0);
-
-	return 0;
-
-fail_gpio_cam_rst:
-	gpio_free(GPIO50_nCAM_EN);
-fail:
-	return err;
-}
-
-static int a910_camera_power(struct device *dev, int on)
-{
-	gpio_set_value(GPIO50_nCAM_EN, !on);
-	return 0;
-}
-
-static int a910_camera_reset(struct device *dev)
-{
-	gpio_set_value(GPIO28_GEN2_CAM_RST, 0);
-	msleep(10);
-	gpio_set_value(GPIO28_GEN2_CAM_RST, 1);
+	a910_camera_reset(NULL);
 
 	return 0;
 }
 
 struct pxacamera_platform_data a910_pxacamera_platform_data = {
 	.flags  = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
-		PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
+		PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN |
+		PXA_CAMERA_PCP,
 	.mclk_10khz = 5000,
-};
-
-static struct i2c_board_info a910_camera_i2c_board_info = {
-	I2C_BOARD_INFO("mt9m111", 0x5d),
-};
-
-static struct soc_camera_link a910_iclink = {
-	.bus_id         = 0,
-	.i2c_adapter_id = 0,
-	.board_info     = &a910_camera_i2c_board_info,
-	.power          = a910_camera_power,
-	.reset          = a910_camera_reset,
-};
-
-static struct platform_device a910_camera = {
-	.name   = "soc-camera-pdrv",
-	.id     = 0,
-	.dev    = {
-		.platform_data = &a910_iclink,
-	},
+	.sensor_i2c_adapter_id = 0,
+	.sensor_i2c_address = 0x5d,
 };
 
 /* leds-lp3944 */
@@ -1122,10 +1087,14 @@ static struct i2c_board_info __initdata a910_i2c_board_info[] = {
 		I2C_BOARD_INFO("lp3944", 0x60),
 		.platform_data = &a910_lp3944_leds,
 	},
+	{
+		I2C_BOARD_INFO("mt9m111", 0x5d),
+	},
 };
 
 static struct platform_device *a910_devices[] __initdata = {
 	&a910_gpio_keys,
+	&camera_supply_dummy_device,
 };
 
 static void __init a910_init(void)
@@ -1145,14 +1114,13 @@ static void __init a910_init(void)
 
 	pxa_set_keypad_info(&a910_keypad_platform_data);
 
-	if (a910_camera_init() == 0) {
+	if (a910_camera_init() == 0)
 		pxa_set_camera_info(&a910_pxacamera_platform_data);
-		platform_device_register(&a910_camera);
-	}
 
 	pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup));
 	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
 	platform_add_devices(ARRAY_AND_SIZE(a910_devices));
+	regulator_has_full_constraints();
 }
 
 MACHINE_START(EZX_A910, "Motorola EZX A910")

arch/arm/mach-pxa/generic.c

@@ -43,21 +43,6 @@ void clear_reset_status(unsigned int mask)
 	}
 }
 
-unsigned long get_clock_tick_rate(void)
-{
-	unsigned long clock_tick_rate;
-
-	if (cpu_is_pxa25x())
-		clock_tick_rate = 3686400;
-	else if (machine_is_mainstone())
-		clock_tick_rate = 3249600;
-	else
-		clock_tick_rate = 3250000;
-
-	return clock_tick_rate;
-}
-EXPORT_SYMBOL(get_clock_tick_rate);
-
 /*
  * For non device-tree builds, keep legacy timer init
  */
@@ -69,8 +54,7 @@ void __init pxa_timer_init(void)
 		pxa27x_clocks_init();
 	if (cpu_is_pxa3xx())
 		pxa3xx_clocks_init();
-	pxa_timer_nodt_init(IRQ_OST0, io_p2v(0x40a00000),
-			    get_clock_tick_rate());
+	pxa_timer_nodt_init(IRQ_OST0, io_p2v(0x40a00000));
 }
 
 /*