|
@@ -0,0 +1,54 @@
|
|
|
+Bindings for ADC envelope detector using a DAC and a comparator
|
|
|
+
|
|
|
+The DAC is used to find the peak level of an alternating voltage input
|
|
|
+signal by a binary search using the output of a comparator wired to
|
|
|
+an interrupt pin. Like so:
|
|
|
+ _
|
|
|
+ | \
|
|
|
+ input +------>-------|+ \
|
|
|
+ | \
|
|
|
+ .-------. | }---.
|
|
|
+ | | | / |
|
|
|
+ | dac|-->--|- / |
|
|
|
+ | | |_/ |
|
|
|
+ | | |
|
|
|
+ | | |
|
|
|
+ | irq|------<-------'
|
|
|
+ | |
|
|
|
+ '-------'
|
|
|
+
|
|
|
+Required properties:
|
|
|
+- compatible: Should be "axentia,tse850-envelope-detector"
|
|
|
+- io-channels: Channel node of the dac to be used for comparator input.
|
|
|
+- io-channel-names: Should be "dac".
|
|
|
+- interrupt specification for one client interrupt,
|
|
|
+ see ../../interrupt-controller/interrupts.txt for details.
|
|
|
+- interrupt-names: Should be "comp".
|
|
|
+
|
|
|
+Example:
|
|
|
+
|
|
|
+ &i2c {
|
|
|
+ dpot: mcp4651-104@28 {
|
|
|
+ compatible = "microchip,mcp4651-104";
|
|
|
+ reg = <0x28>;
|
|
|
+ #io-channel-cells = <1>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ dac: dac {
|
|
|
+ compatible = "dpot-dac";
|
|
|
+ vref-supply = <®_3v3>;
|
|
|
+ io-channels = <&dpot 0>;
|
|
|
+ io-channel-names = "dpot";
|
|
|
+ #io-channel-cells = <1>;
|
|
|
+ };
|
|
|
+
|
|
|
+ envelope-detector {
|
|
|
+ compatible = "axentia,tse850-envelope-detector";
|
|
|
+ io-channels = <&dac 0>;
|
|
|
+ io-channel-names = "dac";
|
|
|
+
|
|
|
+ interrupt-parent = <&gpio>;
|
|
|
+ interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
|
|
|
+ interrupt-names = "comp";
|
|
|
+ };
|