ARM: at91: Call at91_register_devices in the board files

Make every board call the register_devices callback so that the devices
declared by the SoC are registered.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

arch/arm/mach-at91/board-afeb-9260v1.c

@@ -167,6 +167,8 @@ static struct at91_cf_data afeb9260_cf_data = {
 
 static void __init afeb9260_board_init(void)
 {
+	at91_register_devices();
+
 	/* Serial */
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);

arch/arm/mach-at91/board-cam60.c

@@ -170,6 +170,8 @@ static void __init cam60_add_device_nand(void)
 
 static void __init cam60_board_init(void)
 {
+	at91_register_devices();
+
 	/* Serial */
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);

arch/arm/mach-at91/board-cpu9krea.c

@@ -322,6 +322,8 @@ static struct mci_platform_data __initdata cpu9krea_mci0_data = {
 
 static void __init cpu9krea_board_init(void)
 {
+	at91_register_devices();
+
 	/* NOR */
 	cpu9krea_add_device_nor();
 	/* Serial */

arch/arm/mach-at91/board-flexibity.c

@@ -138,6 +138,8 @@ static struct gpio_led flexibity_leds[] = {
 
 static void __init flexibity_board_init(void)
 {
+	at91_register_devices();
+
 	/* Serial */
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);

arch/arm/mach-at91/board-sam9-l9260.c

@@ -187,6 +187,8 @@ static struct gpio_led ek_leds[] = {
 
 static void __init ek_board_init(void)
 {
+	at91_register_devices();
+
 	/* Serial */
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);

arch/arm/mach-at91/board-sam9260ek.c

@@ -307,6 +307,8 @@ static void __init ek_add_device_buttons(void) {}
 
 static void __init ek_board_init(void)
 {
+	at91_register_devices();
+
 	/* Serial */
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);

arch/arm/mach-at91/board-sam9261ek.c

@@ -561,6 +561,8 @@ static struct gpio_led ek_leds[] = {
 
 static void __init ek_board_init(void)
 {
+	at91_register_devices();
+
 	/* Serial */
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);

arch/arm/mach-at91/board-sam9263ek.c

@@ -439,6 +439,8 @@ static struct platform_device *devices[] __initdata = {
 
 static void __init ek_board_init(void)
 {
+	at91_register_devices();
+
 	/* Serial */
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);

arch/arm/mach-at91/board-sam9m10g45ek.c

@@ -471,6 +471,8 @@ static struct platform_device *devices[] __initdata = {
 
 static void __init ek_board_init(void)
 {
+	at91_register_devices();
+
 	/* Serial */
 	/* DGBU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);

arch/arm/mach-at91/board-sam9rlek.c

@@ -292,6 +292,8 @@ static void __init ek_add_device_buttons(void) {}
 
 static void __init ek_board_init(void)
 {
+	at91_register_devices();
+
 	/* Serial */
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);

arch/arm/mach-at91/board-snapper9260.c

@@ -154,6 +154,8 @@ static void __init snapper9260_add_device_nand(void)
 
 static void __init snapper9260_board_init(void)
 {
+	at91_register_devices();
+
 	at91_add_device_i2c(snapper9260_i2c_devices,
 			    ARRAY_SIZE(snapper9260_i2c_devices));