Merge branch 'qlcnic-enhancements'

Shahed Shaikh says:

====================
qlcnic: enhancements

This series adds few enhancements.

  o Patch from Harish reorders the sequence of header files inclusion,
    keeping kernel's header files on top.

  o Firmware introduced a new feature which allows driver to increases
    the size of firmware dump of iSCSI function which is being collected
    by NIC driver.

  o Print buffer address which is holding a firmware dump.

  o Use vzalloc() instead kzalloc() for allocating large chunk of memory
    which will avoid potential memory allocation failure.

  o Add new device ID for 0x8C30 which is a 83xx series based VF function.

Please apply this series to net-next.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/qlogic/qlcnic/qlcnic.h

@@ -24,9 +24,7 @@
 #include <linux/mii.h>
 #include <linux/timer.h>
 #include <linux/irq.h>
-
 #include <linux/vmalloc.h>
-
 #include <linux/io.h>
 #include <asm/byteorder.h>
 #include <linux/bitops.h>
@@ -39,8 +37,8 @@
 
 #define _QLCNIC_LINUX_MAJOR 5
 #define _QLCNIC_LINUX_MINOR 3
-#define _QLCNIC_LINUX_SUBVERSION 62
-#define QLCNIC_LINUX_VERSIONID  "5.3.62"
+#define _QLCNIC_LINUX_SUBVERSION 63
+#define QLCNIC_LINUX_VERSIONID  "5.3.63"
 #define QLCNIC_DRV_IDC_VER  0x01
 #define QLCNIC_DRIVER_VERSION  ((_QLCNIC_LINUX_MAJOR << 16) |\
 		 (_QLCNIC_LINUX_MINOR << 8) | (_QLCNIC_LINUX_SUBVERSION))
@@ -926,6 +924,7 @@ struct qlcnic_mac_vlan_list {
 #define QLCNIC_FW_CAPABILITY_SET_DRV_VER	BIT_5
 #define QLCNIC_FW_CAPABILITY_2_BEACON		BIT_7
 #define QLCNIC_FW_CAPABILITY_2_PER_PORT_ESWITCH_CFG	BIT_9
+#define QLCNIC_FW_CAPABILITY_2_EXT_ISCSI_DUMP	BIT_13
 
 #define QLCNIC_83XX_FW_CAPAB_ENCAP_RX_OFFLOAD	BIT_0
 #define QLCNIC_83XX_FW_CAPAB_ENCAP_TX_OFFLOAD	BIT_1
@@ -2291,8 +2290,9 @@ extern const struct ethtool_ops qlcnic_ethtool_failed_ops;
 
 #define PCI_DEVICE_ID_QLOGIC_QLE824X		0x8020
 #define PCI_DEVICE_ID_QLOGIC_QLE834X		0x8030
-#define PCI_DEVICE_ID_QLOGIC_QLE8830		0x8830
 #define PCI_DEVICE_ID_QLOGIC_VF_QLE834X	0x8430
+#define PCI_DEVICE_ID_QLOGIC_QLE8830		0x8830
+#define PCI_DEVICE_ID_QLOGIC_VF_QLE8C30		0x8C30
 #define PCI_DEVICE_ID_QLOGIC_QLE844X		0x8040
 #define PCI_DEVICE_ID_QLOGIC_VF_QLE844X	0x8440
 
@@ -2319,7 +2319,8 @@ static inline bool qlcnic_83xx_check(struct qlcnic_adapter *adapter)
 		  (device == PCI_DEVICE_ID_QLOGIC_QLE8830) ||
 		  (device == PCI_DEVICE_ID_QLOGIC_QLE844X) ||
 		  (device == PCI_DEVICE_ID_QLOGIC_VF_QLE844X) ||
-		  (device == PCI_DEVICE_ID_QLOGIC_VF_QLE834X)) ? true : false;
+		  (device == PCI_DEVICE_ID_QLOGIC_VF_QLE834X) ||
+		  (device == PCI_DEVICE_ID_QLOGIC_VF_QLE8C30)) ? true : false;
 
 	return status;
 }
@@ -2335,7 +2336,8 @@ static inline bool qlcnic_sriov_vf_check(struct qlcnic_adapter *adapter)
 	bool status;
 
 	status = ((device == PCI_DEVICE_ID_QLOGIC_VF_QLE834X) ||
-		  (device == PCI_DEVICE_ID_QLOGIC_VF_QLE844X)) ? true : false;
+		  (device == PCI_DEVICE_ID_QLOGIC_VF_QLE844X) ||
+		  (device == PCI_DEVICE_ID_QLOGIC_VF_QLE8C30)) ? true : false;
 
 	return status;
 }
@@ -2351,7 +2353,8 @@ static inline bool qlcnic_83xx_vf_check(struct qlcnic_adapter *adapter)
 {
 	unsigned short device = adapter->pdev->device;
 
-	return (device == PCI_DEVICE_ID_QLOGIC_VF_QLE834X) ? true : false;
+	return ((device == PCI_DEVICE_ID_QLOGIC_VF_QLE834X) ||
+		(device == PCI_DEVICE_ID_QLOGIC_VF_QLE8C30)) ? true : false;
 }
 
 static inline bool qlcnic_sriov_check(struct qlcnic_adapter *adapter)

drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c

@@ -5,14 +5,15 @@
  * See LICENSE.qlcnic for copyright and licensing details.
  */
 
-#include "qlcnic.h"
-#include "qlcnic_sriov.h"
 #include <linux/if_vlan.h>
 #include <linux/ipv6.h>
 #include <linux/ethtool.h>
 #include <linux/interrupt.h>
 #include <linux/aer.h>
 
+#include "qlcnic.h"
+#include "qlcnic_sriov.h"
+
 static void __qlcnic_83xx_process_aen(struct qlcnic_adapter *);
 static int qlcnic_83xx_clear_lb_mode(struct qlcnic_adapter *, u8);
 static void qlcnic_83xx_configure_mac(struct qlcnic_adapter *, u8 *, u8,
@@ -118,6 +119,7 @@ static const struct qlcnic_mailbox_metadata qlcnic_83xx_mbx_tbl[] = {
 	{QLCNIC_CMD_DCB_QUERY_CAP, 1, 2},
 	{QLCNIC_CMD_DCB_QUERY_PARAM, 1, 50},
 	{QLCNIC_CMD_SET_INGRESS_ENCAP, 2, 1},
+	{QLCNIC_CMD_83XX_EXTEND_ISCSI_DUMP_CAP, 4, 1},
 };
 
 const u32 qlcnic_83xx_ext_reg_tbl[] = {
@@ -3513,6 +3515,31 @@ out:
 	qlcnic_free_mbx_args(&cmd);
 }
 
+#define QLCNIC_83XX_ADD_PORT0		BIT_0
+#define QLCNIC_83XX_ADD_PORT1		BIT_1
+#define QLCNIC_83XX_EXTENDED_MEM_SIZE	13 /* In MB */
+int qlcnic_83xx_extend_md_capab(struct qlcnic_adapter *adapter)
+{
+	struct qlcnic_cmd_args cmd;
+	int err;
+
+	err = qlcnic_alloc_mbx_args(&cmd, adapter,
+				    QLCNIC_CMD_83XX_EXTEND_ISCSI_DUMP_CAP);
+	if (err)
+		return err;
+
+	cmd.req.arg[1] = (QLCNIC_83XX_ADD_PORT0 | QLCNIC_83XX_ADD_PORT1);
+	cmd.req.arg[2] = QLCNIC_83XX_EXTENDED_MEM_SIZE;
+	cmd.req.arg[3] = QLCNIC_83XX_EXTENDED_MEM_SIZE;
+
+	err = qlcnic_issue_cmd(adapter, &cmd);
+	if (err)
+		dev_err(&adapter->pdev->dev,
+			"failed to issue extend iSCSI minidump capability\n");
+
+	return err;
+}
+
 int qlcnic_83xx_reg_test(struct qlcnic_adapter *adapter)
 {
 	u32 major, minor, sub;

drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h

@@ -10,6 +10,7 @@
 
 #include <linux/types.h>
 #include <linux/etherdevice.h>
+
 #include "qlcnic_hw.h"
 
 #define QLCNIC_83XX_BAR0_LENGTH 0x4000
@@ -626,6 +627,7 @@ int qlcnic_83xx_set_port_eswitch_status(struct qlcnic_adapter *, int, int *);
 
 void qlcnic_83xx_get_minidump_template(struct qlcnic_adapter *);
 void qlcnic_83xx_get_stats(struct qlcnic_adapter *adapter, u64 *data);
+int qlcnic_83xx_extend_md_capab(struct qlcnic_adapter *);
 int qlcnic_83xx_get_settings(struct qlcnic_adapter *, struct ethtool_cmd *);
 int qlcnic_83xx_set_settings(struct qlcnic_adapter *, struct ethtool_cmd *);
 void qlcnic_83xx_get_pauseparam(struct qlcnic_adapter *,

drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c

@@ -1384,7 +1384,7 @@ static int qlcnic_83xx_copy_fw_file(struct qlcnic_adapter *adapter)
 	size_t size;
 	u64 addr;
 
-	temp = kzalloc(fw->size, GFP_KERNEL);
+	temp = vzalloc(fw->size);
 	if (!temp) {
 		release_firmware(fw);
 		fw_info->fw = NULL;
@@ -1430,7 +1430,7 @@ static int qlcnic_83xx_copy_fw_file(struct qlcnic_adapter *adapter)
 exit:
 	release_firmware(fw);
 	fw_info->fw = NULL;
-	kfree(temp);
+	vfree(temp);
 
 	return ret;
 }

drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c

@@ -5,13 +5,13 @@
  * See LICENSE.qlcnic for copyright and licensing details.
  */
 
-#include "qlcnic.h"
-#include "qlcnic_hdr.h"
-
 #include <linux/slab.h>
 #include <net/ip.h>
 #include <linux/bitops.h>
 
+#include "qlcnic.h"
+#include "qlcnic_hdr.h"
+
 #define MASK(n) ((1ULL<<(n))-1)
 #define OCM_WIN_P3P(addr) (addr & 0xffc0000)
 

drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.h

@@ -109,6 +109,7 @@ enum qlcnic_regs {
 #define QLCNIC_CMD_GET_LED_CONFIG		0x6A
 #define QLCNIC_CMD_83XX_SET_DRV_VER		0x6F
 #define QLCNIC_CMD_ADD_RCV_RINGS		0x0B
+#define QLCNIC_CMD_83XX_EXTEND_ISCSI_DUMP_CAP	0x37
 
 #define QLCNIC_INTRPT_INTX			1
 #define QLCNIC_INTRPT_MSIX			3

drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c

@@ -7,11 +7,6 @@
 
 #include <linux/vmalloc.h>
 #include <linux/interrupt.h>
-
-#include "qlcnic.h"
-#include "qlcnic_sriov.h"
-#include "qlcnic_hw.h"
-
 #include <linux/swab.h>
 #include <linux/dma-mapping.h>
 #include <linux/if_vlan.h>
@@ -25,6 +20,10 @@
 #include <net/vxlan.h>
 #endif
 
+#include "qlcnic.h"
+#include "qlcnic_sriov.h"
+#include "qlcnic_hw.h"
+
 MODULE_DESCRIPTION("QLogic 1/10 GbE Converged/Intelligent Ethernet Driver");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(QLCNIC_LINUX_VERSIONID);
@@ -111,8 +110,9 @@ static u32 qlcnic_vlan_tx_check(struct qlcnic_adapter *adapter)
 static const struct pci_device_id qlcnic_pci_tbl[] = {
 	ENTRY(PCI_DEVICE_ID_QLOGIC_QLE824X),
 	ENTRY(PCI_DEVICE_ID_QLOGIC_QLE834X),
-	ENTRY(PCI_DEVICE_ID_QLOGIC_QLE8830),
 	ENTRY(PCI_DEVICE_ID_QLOGIC_VF_QLE834X),
+	ENTRY(PCI_DEVICE_ID_QLOGIC_QLE8830),
+	ENTRY(PCI_DEVICE_ID_QLOGIC_VF_QLE8C30),
 	ENTRY(PCI_DEVICE_ID_QLOGIC_QLE844X),
 	ENTRY(PCI_DEVICE_ID_QLOGIC_VF_QLE844X),
 	{0,}
@@ -1149,6 +1149,7 @@ static void qlcnic_get_bar_length(u32 dev_id, ulong *bar)
 	case PCI_DEVICE_ID_QLOGIC_QLE844X:
 	case PCI_DEVICE_ID_QLOGIC_VF_QLE834X:
 	case PCI_DEVICE_ID_QLOGIC_VF_QLE844X:
+	case PCI_DEVICE_ID_QLOGIC_VF_QLE8C30:
 		*bar = QLCNIC_83XX_BAR0_LENGTH;
 		break;
 	default:
@@ -2491,6 +2492,7 @@ qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		qlcnic_83xx_register_map(ahw);
 		break;
 	case PCI_DEVICE_ID_QLOGIC_VF_QLE834X:
+	case PCI_DEVICE_ID_QLOGIC_VF_QLE8C30:
 	case PCI_DEVICE_ID_QLOGIC_VF_QLE844X:
 		qlcnic_sriov_vf_register_map(ahw);
 		break;

drivers/net/ethernet/qlogic/qlcnic/qlcnic_minidump.c

@@ -5,13 +5,13 @@
  * See LICENSE.qlcnic for copyright and licensing details.
  */
 
+#include <net/ip.h>
+
 #include "qlcnic.h"
 #include "qlcnic_hdr.h"
 #include "qlcnic_83xx_hw.h"
 #include "qlcnic_hw.h"
 
-#include <net/ip.h>
-
 #define QLC_83XX_MINIDUMP_FLASH		0x520000
 #define QLC_83XX_OCM_INDEX			3
 #define QLC_83XX_PCI_INDEX			0
@@ -1388,27 +1388,60 @@ int qlcnic_dump_fw(struct qlcnic_adapter *adapter)
 	fw_dump->clr = 1;
 	snprintf(mesg, sizeof(mesg), "FW_DUMP=%s", adapter->netdev->name);
 	netdev_info(adapter->netdev,
-		    "Dump data %d bytes captured, template header size %d bytes\n",
-		    fw_dump->size, fw_dump->tmpl_hdr_size);
+		    "Dump data %d bytes captured, dump data address = %p, template header size %d bytes, template address = %p\n",
+		    fw_dump->size, fw_dump->data, fw_dump->tmpl_hdr_size,
+		    fw_dump->tmpl_hdr);
 	/* Send a udev event to notify availability of FW dump */
 	kobject_uevent_env(&dev->kobj, KOBJ_CHANGE, msg);
 
 	return 0;
 }
 
+static inline bool
+qlcnic_83xx_md_check_extended_dump_capability(struct qlcnic_adapter *adapter)
+{
+	/* For special adapters (with 0x8830 device ID), where iSCSI firmware
+	 * dump needs to be captured as part of regular firmware dump
+	 * collection process, firmware exports it's capability through
+	 * capability registers
+	 */
+	return ((adapter->pdev->device == PCI_DEVICE_ID_QLOGIC_QLE8830) &&
+		(adapter->ahw->extra_capability[0] &
+		 QLCNIC_FW_CAPABILITY_2_EXT_ISCSI_DUMP));
+}
+
 void qlcnic_83xx_get_minidump_template(struct qlcnic_adapter *adapter)
 {
 	u32 prev_version, current_version;
 	struct qlcnic_hardware_context *ahw = adapter->ahw;
 	struct qlcnic_fw_dump *fw_dump = &ahw->fw_dump;
 	struct pci_dev *pdev = adapter->pdev;
+	bool extended = false;
 
 	prev_version = adapter->fw_version;
 	current_version = qlcnic_83xx_get_fw_version(adapter);
 
 	if (fw_dump->tmpl_hdr == NULL || current_version > prev_version) {
 		vfree(fw_dump->tmpl_hdr);
+
+		if (qlcnic_83xx_md_check_extended_dump_capability(adapter))
+			extended = !qlcnic_83xx_extend_md_capab(adapter);
+
 		if (!qlcnic_fw_cmd_get_minidump_temp(adapter))
 			dev_info(&pdev->dev, "Supports FW dump capability\n");
+
+		/* Once we have minidump template with extended iSCSI dump
+		 * capability, update the minidump capture mask to 0x1f as
+		 * per FW requirement
+		 */
+		if (extended) {
+			struct qlcnic_83xx_dump_template_hdr *hdr;
+
+			hdr = fw_dump->tmpl_hdr;
+			hdr->drv_cap_mask = 0x1f;
+			fw_dump->cap_mask = 0x1f;
+			dev_info(&pdev->dev,
+				 "Extended iSCSI dump capability and updated capture mask to 0x1f\n");
+		}
 	}
 }

drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov.h

@@ -8,10 +8,11 @@
 #ifndef _QLCNIC_83XX_SRIOV_H_
 #define _QLCNIC_83XX_SRIOV_H_
 
-#include "qlcnic.h"
 #include <linux/types.h>
 #include <linux/pci.h>
 
+#include "qlcnic.h"
+
 extern const u32 qlcnic_83xx_reg_tbl[];
 extern const u32 qlcnic_83xx_ext_reg_tbl[];
 

drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c

@@ -5,10 +5,11 @@
  * See LICENSE.qlcnic for copyright and licensing details.
  */
 
+#include <linux/types.h>
+
 #include "qlcnic_sriov.h"
 #include "qlcnic.h"
 #include "qlcnic_83xx_hw.h"
-#include <linux/types.h>
 
 #define QLC_BC_COMMAND	0
 #define QLC_BC_RESPONSE	1

drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c

@@ -5,9 +5,10 @@
  * See LICENSE.qlcnic for copyright and licensing details.
  */
 
+#include <linux/types.h>
+
 #include "qlcnic_sriov.h"
 #include "qlcnic.h"
-#include <linux/types.h>
 
 #define QLCNIC_SRIOV_VF_MAX_MAC 7
 #define QLC_VF_MIN_TX_RATE	100

drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c

@@ -7,10 +7,6 @@
 
 #include <linux/slab.h>
 #include <linux/interrupt.h>
-
-#include "qlcnic.h"
-#include "qlcnic_hw.h"
-
 #include <linux/swab.h>
 #include <linux/dma-mapping.h>
 #include <net/ip.h>
@@ -24,6 +20,9 @@
 #include <linux/hwmon-sysfs.h>
 #endif
 
+#include "qlcnic.h"
+#include "qlcnic_hw.h"
+
 int qlcnicvf_config_bridged_mode(struct qlcnic_adapter *adapter, u32 enable)
 {
 	return -EOPNOTSUPP;