Merge branch 'clockevents/4.13' of https://git.linaro.org/people/daniel.lezcano/linux into timers/core

Pull clockevent changes from Daniel Lezcano:

 - Factored out moxart, aspeed, cortina drivers into a generic timer fttrm010.
   Take the opportunity to add the delay timer (Linus Walleij)

 - Saved / restored tcb atmel context at suspend/resume (Alexandre Belloni)

 - Added ast2500 compatible string and fixed aspeed2500 initialization (Daniel
   Lezcano)

 - Added clock names property for aspeed (Andrew Jeffery)

 - Renamed clocksource_of to timer_of (Daniel Lezcano)

 - Added a common timer init routine (Daniel Lezcano)

Documentation/devicetree/bindings/timer/faraday,fttmr010.txt

@@ -7,7 +7,11 @@ Required properties:
 
 - compatible : Must be one of
   "faraday,fttmr010"
-  "cortina,gemini-timer"
+  "cortina,gemini-timer", "faraday,fttmr010"
+  "moxa,moxart-timer", "faraday,fttmr010"
+  "aspeed,ast2400-timer"
+  "aspeed,ast2500-timer"
+
 - reg : Should contain registers location and length
 - interrupts : Should contain the three timer interrupts usually with
   flags for falling edge

Documentation/devicetree/bindings/timer/moxa,moxart-timer.txt

@@ -1,19 +0,0 @@
-MOXA ART timer
-
-Required properties:
-
-- compatible : Must be one of:
- 	- "moxa,moxart-timer"
- 	- "aspeed,ast2400-timer"
-- reg : Should contain registers location and length
-- interrupts : Should contain the timer interrupt number
-- clocks : Should contain phandle for the clock that drives the counter
-
-Example:
-
-	timer: timer@98400000 {
-		compatible = "moxa,moxart-timer";
-		reg = <0x98400000 0x42>;
-		interrupts = <19 1>;
-		clocks = <&coreclk>;
-	};

arch/arc/kernel/setup.c

@@ -470,7 +470,7 @@ void __init setup_arch(char **cmdline_p)
 void __init time_init(void)
 {
 	of_clk_init(NULL);
-	clocksource_probe();
+	timer_probe();
 }
 
 static int __init customize_machine(void)

arch/arm/Kconfig

@@ -337,7 +337,7 @@ config ARCH_MULTIPLATFORM
 	select ARM_HAS_SG_CHAIN
 	select ARM_PATCH_PHYS_VIRT
 	select AUTO_ZRELADDR
-	select CLKSRC_OF
+	select TIMER_OF
 	select COMMON_CLK
 	select GENERIC_CLOCKEVENTS
 	select MIGHT_HAVE_PCI
@@ -351,7 +351,7 @@ config ARM_SINGLE_ARMV7M
 	depends on !MMU
 	select ARM_NVIC
 	select AUTO_ZRELADDR
-	select CLKSRC_OF
+	select TIMER_OF
 	select COMMON_CLK
 	select CPU_V7M
 	select GENERIC_CLOCKEVENTS
@@ -532,7 +532,7 @@ config ARCH_PXA
 	select CLKDEV_LOOKUP
 	select CLKSRC_PXA
 	select CLKSRC_MMIO
-	select CLKSRC_OF
+	select TIMER_OF
 	select CPU_XSCALE if !CPU_XSC3
 	select GENERIC_CLOCKEVENTS
 	select GPIO_PXA
@@ -571,7 +571,7 @@ config ARCH_SA1100
 	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
 	select CLKSRC_PXA
-	select CLKSRC_OF if OF
+	select TIMER_OF if OF
 	select CPU_FREQ
 	select CPU_SA1100
 	select GENERIC_CLOCKEVENTS
@@ -1357,7 +1357,7 @@ config HAVE_ARM_ARCH_TIMER
 
 config HAVE_ARM_TWD
 	bool
-	select CLKSRC_OF if OF
+	select TIMER_OF if OF
 	help
 	  This options enables support for the ARM timer and watchdog unit
 

arch/arm/boot/dts/aspeed-g4.dtsi

@@ -893,6 +893,7 @@
 				//interrupts = <16 17 18 35 36 37 38 39>;
 				interrupts = <16>;
 				clocks = <&clk_apb>;
+				clock-names = "PCLK";
 			};
 
 			wdt1: wdt@1e785000 {

arch/arm/boot/dts/aspeed-g5.dtsi

@@ -1000,6 +1000,7 @@
 				//interrupts = <16 17 18 35 36 37 38 39>;
 				interrupts = <16>;
 				clocks = <&clk_apb>;
+				clock-names = "PCLK";
 			};
 
 

arch/arm/kernel/smp_twd.c

@@ -403,7 +403,7 @@ out:
 	WARN(err, "twd_local_timer_of_register failed (%d)\n", err);
 	return err;
 }
-CLOCKSOURCE_OF_DECLARE(arm_twd_a9, "arm,cortex-a9-twd-timer", twd_local_timer_of_register);
-CLOCKSOURCE_OF_DECLARE(arm_twd_a5, "arm,cortex-a5-twd-timer", twd_local_timer_of_register);
-CLOCKSOURCE_OF_DECLARE(arm_twd_11mp, "arm,arm11mp-twd-timer", twd_local_timer_of_register);
+TIMER_OF_DECLARE(arm_twd_a9, "arm,cortex-a9-twd-timer", twd_local_timer_of_register);
+TIMER_OF_DECLARE(arm_twd_a5, "arm,cortex-a5-twd-timer", twd_local_timer_of_register);
+TIMER_OF_DECLARE(arm_twd_11mp, "arm,arm11mp-twd-timer", twd_local_timer_of_register);
 #endif

arch/arm/kernel/time.c

@@ -120,6 +120,6 @@ void __init time_init(void)
 #ifdef CONFIG_COMMON_CLK
 		of_clk_init(NULL);
 #endif
-		clocksource_probe();
+		timer_probe();
 	}
 }

arch/arm/mach-aspeed/Kconfig

@@ -4,7 +4,7 @@ menuconfig ARCH_ASPEED
 	select SRAM
 	select WATCHDOG
 	select ASPEED_WATCHDOG
-	select MOXART_TIMER
+	select FTTMR010_TIMER
 	select MFD_SYSCON
 	select PINCTRL
 	help

arch/arm/mach-bcm/Kconfig

@@ -150,7 +150,7 @@ config ARCH_BCM2835
 	select ARM_ERRATA_411920 if ARCH_MULTI_V6
 	select ARM_TIMER_SP804
 	select HAVE_ARM_ARCH_TIMER if ARCH_MULTI_V7
-	select CLKSRC_OF
+	select TIMER_OF
 	select BCM2835_TIMER
 	select PINCTRL
 	select PINCTRL_BCM2835

arch/arm/mach-clps711x/Kconfig

@@ -2,7 +2,7 @@ menuconfig ARCH_CLPS711X
 	bool "Cirrus Logic EP721x/EP731x-based"
 	depends on ARCH_MULTI_V4T
 	select AUTO_ZRELADDR
-	select CLKSRC_OF
+	select TIMER_OF
 	select CLPS711X_TIMER
 	select COMMON_CLK
 	select CPU_ARM720T

arch/arm/mach-mediatek/mediatek.c

@@ -41,7 +41,7 @@ static void __init mediatek_timer_init(void)
 	}
 
 	of_clk_init(NULL);
-	clocksource_probe();
+	timer_probe();
 };
 
 static const char * const mediatek_board_dt_compat[] = {

arch/arm/mach-moxart/Kconfig

@@ -4,7 +4,7 @@ menuconfig ARCH_MOXART
 	select CPU_FA526
 	select ARM_DMA_MEM_BUFFERABLE
 	select FARADAY_FTINTC010
-	select MOXART_TIMER
+	select FTTMR010_TIMER
 	select GPIOLIB
 	select PHYLIB if NETDEVICES
 	help

arch/arm/mach-omap2/timer.c

@@ -497,7 +497,7 @@ void __init omap_init_time(void)
 	__omap_sync32k_timer_init(1, "timer_32k_ck", "ti,timer-alwon",
 			2, "timer_sys_ck", NULL, false);
 
-	clocksource_probe();
+	timer_probe();
 }
 
 #if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM43XX)
@@ -506,7 +506,7 @@ void __init omap3_secure_sync32k_timer_init(void)
 	__omap_sync32k_timer_init(12, "secure_32k_fck", "ti,timer-secure",
 			2, "timer_sys_ck", NULL, false);
 
-	clocksource_probe();
+	timer_probe();
 }
 #endif /* CONFIG_ARCH_OMAP3 */
 
@@ -517,7 +517,7 @@ void __init omap3_gptimer_timer_init(void)
 	__omap_sync32k_timer_init(2, "timer_sys_ck", NULL,
 			1, "timer_sys_ck", "ti,timer-alwon", true);
 	if (of_have_populated_dt())
-		clocksource_probe();
+		timer_probe();
 }
 #endif
 
@@ -532,7 +532,7 @@ static void __init omap4_sync32k_timer_init(void)
 void __init omap4_local_timer_init(void)
 {
 	omap4_sync32k_timer_init();
-	clocksource_probe();
+	timer_probe();
 }
 #endif
 
@@ -656,7 +656,7 @@ void __init omap5_realtime_timer_init(void)
 	omap4_sync32k_timer_init();
 	realtime_counter_init();
 
-	clocksource_probe();
+	timer_probe();
 }
 #endif /* CONFIG_SOC_OMAP5 || CONFIG_SOC_DRA7XX */
 

arch/arm/mach-rockchip/rockchip.c

@@ -55,7 +55,7 @@ static void __init rockchip_timer_init(void)
 	}
 
 	of_clk_init(NULL);
-	clocksource_probe();
+	timer_probe();
 }
 
 static void __init rockchip_dt_init(void)

arch/arm/mach-s3c24xx/Kconfig

@@ -394,7 +394,7 @@ config MACH_SMDK2416
 
 config MACH_S3C2416_DT
 	bool "Samsung S3C2416 machine using devicetree"
-	select CLKSRC_OF
+	select TIMER_OF
 	select USE_OF
 	select PINCTRL
 	select PINCTRL_S3C24XX

arch/arm/mach-s3c64xx/Kconfig

@@ -336,7 +336,7 @@ config MACH_WLF_CRAGG_6410
 
 config MACH_S3C64XX_DT
 	bool "Samsung S3C6400/S3C6410 machine using Device Tree"
-	select CLKSRC_OF
+	select TIMER_OF
 	select CPU_S3C6400
 	select CPU_S3C6410
 	select PINCTRL

arch/arm/mach-shmobile/setup-rcar-gen2.c

@@ -113,7 +113,7 @@ void __init rcar_gen2_timer_init(void)
 #endif /* CONFIG_ARM_ARCH_TIMER */
 
 	of_clk_init(NULL);
-	clocksource_probe();
+	timer_probe();
 }
 
 struct memory_reserve_config {

arch/arm/mach-spear/spear13xx.c

@@ -124,5 +124,5 @@ void __init spear13xx_timer_init(void)
 	clk_put(pclk);
 
 	spear_setup_of_timer();
-	clocksource_probe();
+	timer_probe();
 }

arch/arm/mach-sunxi/sunxi.c

@@ -42,7 +42,7 @@ static void __init sun6i_timer_init(void)
 	of_clk_init(NULL);
 	if (IS_ENABLED(CONFIG_RESET_CONTROLLER))
 		sun6i_reset_init();
-	clocksource_probe();
+	timer_probe();
 }
 
 DT_MACHINE_START(SUN6I_DT, "Allwinner sun6i (A31) Family")

arch/arm/mach-u300/core.c

@@ -407,7 +407,7 @@ static const char * u300_board_compat[] = {
 DT_MACHINE_START(U300_DT, "U300 S335/B335 (Device Tree)")
 	.map_io		= u300_map_io,
 	.init_irq	= u300_init_irq_dt,
-	.init_time	= clocksource_probe,
+	.init_time	= timer_probe,
 	.init_machine	= u300_init_machine_dt,
 	.restart	= u300_restart,
 	.dt_compat      = u300_board_compat,

arch/arm/mach-zynq/common.c

@@ -150,7 +150,7 @@ static void __init zynq_timer_init(void)
 {
 	zynq_clock_init();
 	of_clk_init(NULL);
-	clocksource_probe();
+	timer_probe();
 }
 
 static struct map_desc zynq_cortex_a9_scu_map __initdata = {

arch/arm64/Kconfig.platforms

@@ -18,7 +18,7 @@ config ARCH_ALPINE
 
 config ARCH_BCM2835
 	bool "Broadcom BCM2835 family"
-	select CLKSRC_OF
+	select TIMER_OF
 	select GPIOLIB
 	select PINCTRL
 	select PINCTRL_BCM2835
@@ -178,7 +178,7 @@ config ARCH_TEGRA
 	select ARCH_HAS_RESET_CONTROLLER
 	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
-	select CLKSRC_OF
+	select TIMER_OF
 	select GENERIC_CLOCKEVENTS
 	select GPIOLIB
 	select PINCTRL

arch/arm64/kernel/time.c

@@ -70,7 +70,7 @@ void __init time_init(void)
 	u32 arch_timer_rate;
 
 	of_clk_init(NULL);
-	clocksource_probe();
+	timer_probe();
 
 	tick_setup_hrtimer_broadcast();
 

arch/h8300/Kconfig

@@ -15,7 +15,7 @@ config H8300
 	select OF_IRQ
 	select OF_EARLY_FLATTREE
 	select HAVE_MEMBLOCK
-	select CLKSRC_OF
+	select TIMER_OF
 	select H8300_TMR8
 	select HAVE_KERNEL_GZIP
 	select HAVE_KERNEL_LZO

arch/h8300/kernel/setup.c

@@ -246,5 +246,5 @@ void __init calibrate_delay(void)
 void __init time_init(void)
 {
 	of_clk_init(NULL);
-	clocksource_probe();
+	timer_probe();
 }

arch/microblaze/Kconfig

@@ -4,7 +4,7 @@ config MICROBLAZE
 	select ARCH_MIGHT_HAVE_PC_PARPORT
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select BUILDTIME_EXTABLE_SORT
-	select CLKSRC_OF
+	select TIMER_OF
 	select CLONE_BACKWARDS3
 	select COMMON_CLK
 	select GENERIC_ATOMIC64

arch/microblaze/kernel/setup.c

@@ -192,7 +192,7 @@ void __init time_init(void)
 {
 	of_clk_init(NULL);
 	setup_cpuinfo_clk();
-	clocksource_probe();
+	timer_probe();
 }
 
 #ifdef CONFIG_DEBUG_FS

arch/microblaze/kernel/timer.c

@@ -333,5 +333,5 @@ static int __init xilinx_timer_init(struct device_node *timer)
 	return 0;
 }
 
-CLOCKSOURCE_OF_DECLARE(xilinx_timer, "xlnx,xps-timer-1.00.a",
+TIMER_OF_DECLARE(xilinx_timer, "xlnx,xps-timer-1.00.a",
 		       xilinx_timer_init);

arch/mips/generic/init.c

@@ -161,7 +161,7 @@ void __init plat_time_init(void)
 		}
 	}
 
-	clocksource_probe();
+	timer_probe();
 }
 
 void __init arch_init_irq(void)

arch/mips/mti-malta/malta-time.c

@@ -265,7 +265,7 @@ void __init plat_time_init(void)
 		       (freq%1000000)*100/1000000);
 #ifdef CONFIG_CLKSRC_MIPS_GIC
 		update_gic_frequency_dt();
-		clocksource_probe();
+		timer_probe();
 #endif
 	}
 #endif

arch/mips/pic32/pic32mzda/time.c

@@ -64,5 +64,5 @@ void __init plat_time_init(void)
 	pr_info("CPU Clock: %ldMHz\n", rate / 1000000);
 	mips_hpt_frequency = rate / 2;
 
-	clocksource_probe();
+	timer_probe();
 }

arch/mips/pistachio/time.c

@@ -39,7 +39,7 @@ void __init plat_time_init(void)
 	struct clk *clk;
 
 	of_clk_init(NULL);
-	clocksource_probe();
+	timer_probe();
 
 	np = of_get_cpu_node(0, NULL);
 	if (!np) {

arch/mips/ralink/Kconfig

@@ -4,7 +4,7 @@ config CLKEVT_RT3352
 	bool
 	depends on SOC_RT305X || SOC_MT7620
 	default y
-	select CLKSRC_OF
+	select TIMER_OF
 	select CLKSRC_MMIO
 
 config RALINK_ILL_ACC

arch/mips/ralink/cevt-rt3352.c

@@ -152,4 +152,4 @@ static int __init ralink_systick_init(struct device_node *np)
 	return 0;
 }
 
-CLOCKSOURCE_OF_DECLARE(systick, "ralink,cevt-systick", ralink_systick_init);
+TIMER_OF_DECLARE(systick, "ralink,cevt-systick", ralink_systick_init);

arch/mips/ralink/clk.c

@@ -82,5 +82,5 @@ void __init plat_time_init(void)
 	pr_info("CPU Clock: %ldMHz\n", clk_get_rate(clk) / 1000000);
 	mips_hpt_frequency = clk_get_rate(clk) / 2;
 	clk_put(clk);
-	clocksource_probe();
+	timer_probe();
 }

arch/mips/ralink/timer-gic.c

@@ -20,5 +20,5 @@ void __init plat_time_init(void)
 	ralink_of_remap();
 
 	of_clk_init(NULL);
-	clocksource_probe();
+	timer_probe();
 }

arch/mips/xilfpga/time.c

@@ -22,7 +22,7 @@ void __init plat_time_init(void)
 	struct clk *clk;
 
 	of_clk_init(NULL);
-	clocksource_probe();
+	timer_probe();
 
 	np = of_get_cpu_node(0, NULL);
 	if (!np) {

arch/nios2/Kconfig

@@ -1,6 +1,6 @@
 config NIOS2
 	def_bool y
-	select CLKSRC_OF
+	select TIMER_OF
 	select GENERIC_ATOMIC64
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_CPU_DEVICES

arch/nios2/kernel/time.c

@@ -350,7 +350,7 @@ void __init time_init(void)
 	if (count < 2)
 		panic("%d timer is found, it needs 2 timers in system\n", count);
 
-	clocksource_probe();
+	timer_probe();
 }
 
-CLOCKSOURCE_OF_DECLARE(nios2_timer, ALTR_TIMER_COMPATIBLE, nios2_time_init);
+TIMER_OF_DECLARE(nios2_timer, ALTR_TIMER_COMPATIBLE, nios2_time_init);

arch/sh/boards/Kconfig

@@ -10,7 +10,7 @@ config SH_DEVICE_TREE
 	bool "Board Described by Device Tree"
 	select OF
 	select OF_EARLY_FLATTREE
-	select CLKSRC_OF
+	select TIMER_OF
 	select COMMON_CLK
 	select GENERIC_CALIBRATE_DELAY
 	help

arch/sh/boards/of-generic.c

@@ -119,7 +119,7 @@ static void __init sh_of_mem_reserve(void)
 static void __init sh_of_time_init(void)
 {
 	pr_info("SH generic board support: scanning for clocksource devices\n");
-	clocksource_probe();
+	timer_probe();
 }
 
 static void __init sh_of_setup(char **cmdline_p)

arch/xtensa/kernel/time.c

@@ -187,7 +187,7 @@ void __init time_init(void)
 	local_timer_setup(0);
 	setup_irq(this_cpu_ptr(&ccount_timer)->evt.irq, &timer_irqaction);
 	sched_clock_register(ccount_sched_clock_read, 32, ccount_freq);
-	clocksource_probe();
+	timer_probe();
 }
 
 /*

drivers/clocksource/Kconfig

@@ -1,22 +1,16 @@
 menu "Clock Source drivers"
 	depends on !ARCH_USES_GETTIMEOFFSET
 
-config CLKSRC_OF
+config TIMER_OF
 	bool
-	select CLKSRC_PROBE
-
-config CLKEVT_OF
-	bool
-	select CLKEVT_PROBE
-
-config CLKSRC_ACPI
-	bool
-	select CLKSRC_PROBE
+	depends on GENERIC_CLOCKEVENTS
+	select TIMER_PROBE
 
-config CLKSRC_PROBE
+config TIMER_ACPI
 	bool
+	select TIMER_PROBE
 
-config CLKEVT_PROBE
+config TIMER_PROBE
 	bool
 
 config CLKSRC_I8253
@@ -65,14 +59,14 @@ config DW_APB_TIMER
 config DW_APB_TIMER_OF
 	bool
 	select DW_APB_TIMER
-	select CLKSRC_OF
+	select TIMER_OF
 
 config FTTMR010_TIMER
 	bool "Faraday Technology timer driver" if COMPILE_TEST
 	depends on GENERIC_CLOCKEVENTS
 	depends on HAS_IOMEM
 	select CLKSRC_MMIO
-	select CLKSRC_OF
+	select TIMER_OF
 	select MFD_SYSCON
 	help
 	  Enables support for the Faraday Technology timer block
@@ -81,7 +75,7 @@ config FTTMR010_TIMER
 config ROCKCHIP_TIMER
 	bool "Rockchip timer driver" if COMPILE_TEST
 	depends on ARM || ARM64
-	select CLKSRC_OF
+	select TIMER_OF
 	select CLKSRC_MMIO
 	help
 	  Enables the support for the rockchip timer driver.
@@ -89,7 +83,7 @@ config ROCKCHIP_TIMER
 config ARMADA_370_XP_TIMER
 	bool "Armada 370 and XP timer driver" if COMPILE_TEST
 	depends on ARM
-	select CLKSRC_OF
+	select TIMER_OF
 	select CLKSRC_MMIO
 	help
 	  Enables the support for the Armada 370 and XP timer driver.
@@ -104,7 +98,7 @@ config MESON6_TIMER
 config ORION_TIMER
 	bool "Orion timer driver" if COMPILE_TEST
 	depends on ARM
-	select CLKSRC_OF
+	select TIMER_OF
 	select CLKSRC_MMIO
 	help
 	  Enables the support for the Orion timer driver
@@ -148,7 +142,7 @@ config ASM9260_TIMER
 	bool "ASM9260 timer driver" if COMPILE_TEST
 	depends on GENERIC_CLOCKEVENTS
 	select CLKSRC_MMIO
-	select CLKSRC_OF
+	select TIMER_OF
 	help
 	  Enables support for the ASM9260 timer.
 
@@ -188,13 +182,6 @@ config ATLAS7_TIMER
 	help
 	  Enables support for the Atlas7 timer.
 
-config MOXART_TIMER
-	bool "Moxart timer driver" if COMPILE_TEST
-	depends on GENERIC_CLOCKEVENTS
-	select CLKSRC_MMIO
-	help
-	  Enables support for the Moxart timer.
-
 config MXS_TIMER
 	bool "Mxs timer driver" if COMPILE_TEST
 	depends on GENERIC_CLOCKEVENTS
@@ -261,21 +248,21 @@ config CLKSRC_LPC32XX
 	depends on GENERIC_CLOCKEVENTS && HAS_IOMEM
 	depends on ARM
 	select CLKSRC_MMIO
-	select CLKSRC_OF
+	select TIMER_OF
 	help
 	  Support for the LPC32XX clocksource.
 
 config CLKSRC_PISTACHIO
 	bool "Clocksource for Pistachio SoC" if COMPILE_TEST
 	depends on HAS_IOMEM
-	select CLKSRC_OF
+	select TIMER_OF
 	help
 	  Enables the clocksource for the Pistachio SoC.
 
 config CLKSRC_TI_32K
 	bool "Texas Instruments 32.768 Hz Clocksource" if COMPILE_TEST
 	depends on GENERIC_SCHED_CLOCK
-	select CLKSRC_OF if OF
+	select TIMER_OF if OF
 	help
 	  This option enables support for Texas Instruments 32.768 Hz clocksource
 	  available on many OMAP-like platforms.
@@ -284,7 +271,7 @@ config CLKSRC_NPS
 	bool "NPS400 clocksource driver" if COMPILE_TEST
 	depends on !PHYS_ADDR_T_64BIT
 	select CLKSRC_MMIO
-	select CLKSRC_OF if OF
+	select TIMER_OF if OF
 	help
 	  NPS400 clocksource support.
 	  Got 64 bit counter with update rate up to 1000MHz.
@@ -299,12 +286,12 @@ config CLKSRC_MPS2
 	bool "Clocksource for MPS2 SoCs" if COMPILE_TEST
 	depends on GENERIC_SCHED_CLOCK
 	select CLKSRC_MMIO
-	select CLKSRC_OF
+	select TIMER_OF
 
 config ARC_TIMERS
 	bool "Support for 32-bit TIMERn counters in ARC Cores" if COMPILE_TEST
 	depends on GENERIC_CLOCKEVENTS
-	select CLKSRC_OF
+	select TIMER_OF
 	help
 	  These are legacy 32-bit TIMER0 and TIMER1 counters found on all ARC cores
 	  (ARC700 as well as ARC HS38).
@@ -314,7 +301,7 @@ config ARC_TIMERS_64BIT
 	bool "Support for 64-bit counters in ARC HS38 cores" if COMPILE_TEST
 	depends on GENERIC_CLOCKEVENTS
 	depends on ARC_TIMERS
-	select CLKSRC_OF
+	select TIMER_OF
 	help
 	  This enables 2 different 64-bit timers: RTC (for UP) and GFRC (for SMP)
 	  RTC is implemented inside the core, while GFRC sits outside the core in
@@ -323,8 +310,8 @@ config ARC_TIMERS_64BIT
 
 config ARM_ARCH_TIMER
 	bool
-	select CLKSRC_OF if OF
-	select CLKSRC_ACPI if ACPI
+	select TIMER_OF if OF
+	select TIMER_ACPI if ACPI
 
 config ARM_ARCH_TIMER_EVTSTREAM
 	bool "Enable ARM architected timer event stream generation by default"
@@ -381,7 +368,7 @@ config ARM64_ERRATUM_858921
 
 config ARM_GLOBAL_TIMER
 	bool "Support for the ARM global timer" if COMPILE_TEST
-	select CLKSRC_OF if OF
+	select TIMER_OF if OF
 	depends on ARM
 	help
 	  This options enables support for the ARM global timer unit
@@ -390,7 +377,7 @@ config ARM_TIMER_SP804
 	bool "Support for Dual Timer SP804 module"
 	depends on GENERIC_SCHED_CLOCK && CLKDEV_LOOKUP
 	select CLKSRC_MMIO
-	select CLKSRC_OF if OF
+	select TIMER_OF if OF
 
 config CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
 	bool
@@ -401,19 +388,19 @@ config CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
 
 config ARMV7M_SYSTICK
 	bool "Support for the ARMv7M system time" if COMPILE_TEST
-	select CLKSRC_OF if OF
+	select TIMER_OF if OF
 	select CLKSRC_MMIO
 	help
 	  This options enables support for the ARMv7M system timer unit
 
 config ATMEL_PIT
-	select CLKSRC_OF if OF
+	select TIMER_OF if OF
 	def_bool SOC_AT91SAM9 || SOC_SAMA5
 
 config ATMEL_ST
 	bool "Atmel ST timer support" if COMPILE_TEST
 	depends on GENERIC_CLOCKEVENTS
-	select CLKSRC_OF
+	select TIMER_OF
 	select MFD_SYSCON
 	help
 	  Support for the Atmel ST timer.
@@ -456,7 +443,7 @@ config VF_PIT_TIMER
 config OXNAS_RPS_TIMER
 	bool "Oxford Semiconductor OXNAS RPS Timers driver" if COMPILE_TEST
 	depends on GENERIC_CLOCKEVENTS
-	select CLKSRC_OF
+	select TIMER_OF
 	select CLKSRC_MMIO
 	help
 	  This enables support for the Oxford Semiconductor OXNAS RPS timers.
@@ -467,7 +454,7 @@ config SYS_SUPPORTS_SH_CMT
 config MTK_TIMER
 	bool "Mediatek timer driver" if COMPILE_TEST
 	depends on GENERIC_CLOCKEVENTS && HAS_IOMEM
-	select CLKSRC_OF
+	select TIMER_OF
 	select CLKSRC_MMIO
 	help
 	  Support for Mediatek timer driver.
@@ -540,7 +527,7 @@ config EM_TIMER_STI
 config CLKSRC_QCOM
 	bool "Qualcomm MSM timer" if COMPILE_TEST
 	depends on ARM
-	select CLKSRC_OF
+	select TIMER_OF
 	help
 	  This enables the clocksource and the per CPU clockevent driver for the
 	  Qualcomm SoCs.
@@ -548,7 +535,7 @@ config CLKSRC_QCOM
 config CLKSRC_VERSATILE
 	bool "ARM Versatile (Express) reference platforms clock source" if COMPILE_TEST
 	depends on GENERIC_SCHED_CLOCK && !ARCH_USES_GETTIMEOFFSET
-	select CLKSRC_OF
+	select TIMER_OF
 	default y if MFD_VEXPRESS_SYSREG
 	help
 	  This option enables clock source based on free running
@@ -559,12 +546,12 @@ config CLKSRC_VERSATILE
 config CLKSRC_MIPS_GIC
 	bool
 	depends on MIPS_GIC
-	select CLKSRC_OF
+	select TIMER_OF
 
 config CLKSRC_TANGO_XTAL
 	bool "Clocksource for Tango SoC" if COMPILE_TEST
 	depends on ARM
-	select CLKSRC_OF
+	select TIMER_OF
 	select CLKSRC_MMIO
 	help
 	  This enables the clocksource for Tango SoC
@@ -605,7 +592,7 @@ config CLKSRC_IMX_GPT
 
 config CLKSRC_ST_LPC
 	bool "Low power clocksource found in the LPC" if COMPILE_TEST
-	select CLKSRC_OF if OF
+	select TIMER_OF if OF
 	depends on HAS_IOMEM
 	select CLKSRC_MMIO
 	help

drivers/clocksource/Makefile

@@ -1,5 +1,5 @@
-obj-$(CONFIG_CLKSRC_PROBE)	+= clksrc-probe.o
-obj-$(CONFIG_CLKEVT_PROBE)	+= clkevt-probe.o
+obj-$(CONFIG_TIMER_OF)		+= timer-of.o
+obj-$(CONFIG_TIMER_PROBE)	+= timer-probe.o
 obj-$(CONFIG_ATMEL_PIT)		+= timer-atmel-pit.o
 obj-$(CONFIG_ATMEL_ST)		+= timer-atmel-st.o
 obj-$(CONFIG_ATMEL_TCB_CLKSRC)	+= tcb_clksrc.o
@@ -26,7 +26,6 @@ obj-$(CONFIG_ORION_TIMER)	+= time-orion.o
 obj-$(CONFIG_BCM2835_TIMER)	+= bcm2835_timer.o
 obj-$(CONFIG_CLPS711X_TIMER)	+= clps711x-timer.o
 obj-$(CONFIG_ATLAS7_TIMER)	+= timer-atlas7.o
-obj-$(CONFIG_MOXART_TIMER)	+= moxart_timer.o
 obj-$(CONFIG_MXS_TIMER)		+= mxs_timer.o
 obj-$(CONFIG_CLKSRC_PXA)	+= pxa_timer.o
 obj-$(CONFIG_PRIMA2_TIMER)	+= timer-prima2.o

drivers/clocksource/arc_timer.c

@@ -99,7 +99,7 @@ static int __init arc_cs_setup_gfrc(struct device_node *node)
 
 	return clocksource_register_hz(&arc_counter_gfrc, arc_timer_freq);
 }
-CLOCKSOURCE_OF_DECLARE(arc_gfrc, "snps,archs-timer-gfrc", arc_cs_setup_gfrc);
+TIMER_OF_DECLARE(arc_gfrc, "snps,archs-timer-gfrc", arc_cs_setup_gfrc);
 
 #define AUX_RTC_CTRL	0x103
 #define AUX_RTC_LOW	0x104
@@ -158,7 +158,7 @@ static int __init arc_cs_setup_rtc(struct device_node *node)
 
 	return clocksource_register_hz(&arc_counter_rtc, arc_timer_freq);
 }
-CLOCKSOURCE_OF_DECLARE(arc_rtc, "snps,archs-timer-rtc", arc_cs_setup_rtc);
+TIMER_OF_DECLARE(arc_rtc, "snps,archs-timer-rtc", arc_cs_setup_rtc);
 
 #endif
 
@@ -333,4 +333,4 @@ static int __init arc_of_timer_init(struct device_node *np)
 
 	return ret;
 }
-CLOCKSOURCE_OF_DECLARE(arc_clkevt, "snps,arc-timer", arc_of_timer_init);
+TIMER_OF_DECLARE(arc_clkevt, "snps,arc-timer", arc_of_timer_init);

drivers/clocksource/arm_arch_timer.c

@@ -1194,8 +1194,8 @@ static int __init arch_timer_of_init(struct device_node *np)
 
 	return arch_timer_common_init();
 }
-CLOCKSOURCE_OF_DECLARE(armv7_arch_timer, "arm,armv7-timer", arch_timer_of_init);
-CLOCKSOURCE_OF_DECLARE(armv8_arch_timer, "arm,armv8-timer", arch_timer_of_init);
+TIMER_OF_DECLARE(armv7_arch_timer, "arm,armv7-timer", arch_timer_of_init);
+TIMER_OF_DECLARE(armv8_arch_timer, "arm,armv8-timer", arch_timer_of_init);
 
 static u32 __init
 arch_timer_mem_frame_get_cntfrq(struct arch_timer_mem_frame *frame)
@@ -1382,7 +1382,7 @@ out:
 	kfree(timer_mem);
 	return ret;
 }
-CLOCKSOURCE_OF_DECLARE(armv7_arch_timer_mem, "arm,armv7-timer-mem",
+TIMER_OF_DECLARE(armv7_arch_timer_mem, "arm,armv7-timer-mem",
 		       arch_timer_mem_of_init);
 
 #ifdef CONFIG_ACPI_GTDT
@@ -1516,5 +1516,5 @@ static int __init arch_timer_acpi_init(struct acpi_table_header *table)
 
 	return arch_timer_common_init();
 }
-CLOCKSOURCE_ACPI_DECLARE(arch_timer, ACPI_SIG_GTDT, arch_timer_acpi_init);
+TIMER_ACPI_DECLARE(arch_timer, ACPI_SIG_GTDT, arch_timer_acpi_init);
 #endif

drivers/clocksource/arm_global_timer.c

@@ -339,5 +339,5 @@ out_unmap:
 }
 
 /* Only tested on r2p2 and r3p0  */
-CLOCKSOURCE_OF_DECLARE(arm_gt, "arm,cortex-a9-global-timer",
+TIMER_OF_DECLARE(arm_gt, "arm,cortex-a9-global-timer",
 			global_timer_of_register);

drivers/clocksource/armv7m_systick.c

@@ -82,5 +82,5 @@ out_unmap:
 	return ret;
 }
 
-CLOCKSOURCE_OF_DECLARE(arm_systick, "arm,armv7m-systick",
+TIMER_OF_DECLARE(arm_systick, "arm,armv7m-systick",
 			system_timer_of_register);

drivers/clocksource/asm9260_timer.c

@@ -238,5 +238,5 @@ static int __init asm9260_timer_init(struct device_node *np)
 
 	return 0;
 }
-CLOCKSOURCE_OF_DECLARE(asm9260_timer, "alphascale,asm9260-timer",
+TIMER_OF_DECLARE(asm9260_timer, "alphascale,asm9260-timer",
 		asm9260_timer_init);

drivers/clocksource/bcm2835_timer.c

@@ -148,5 +148,5 @@ err_iounmap:
 	iounmap(base);
 	return ret;
 }
-CLOCKSOURCE_OF_DECLARE(bcm2835, "brcm,bcm2835-system-timer",
+TIMER_OF_DECLARE(bcm2835, "brcm,bcm2835-system-timer",
 			bcm2835_timer_init);

drivers/clocksource/bcm_kona_timer.c

@@ -198,9 +198,9 @@ static int __init kona_timer_init(struct device_node *node)
 	return 0;
 }
 
-CLOCKSOURCE_OF_DECLARE(brcm_kona, "brcm,kona-timer", kona_timer_init);
+TIMER_OF_DECLARE(brcm_kona, "brcm,kona-timer", kona_timer_init);
 /*
  * bcm,kona-timer is deprecated by brcm,kona-timer
  * being kept here for driver compatibility
  */
-CLOCKSOURCE_OF_DECLARE(bcm_kona, "bcm,kona-timer", kona_timer_init);
+TIMER_OF_DECLARE(bcm_kona, "bcm,kona-timer", kona_timer_init);

drivers/clocksource/cadence_ttc_timer.c

@@ -539,4 +539,4 @@ static int __init ttc_timer_init(struct device_node *timer)
 	return 0;
 }
 
-CLOCKSOURCE_OF_DECLARE(ttc, "cdns,ttc", ttc_timer_init);
+TIMER_OF_DECLARE(ttc, "cdns,ttc", ttc_timer_init);

drivers/clocksource/clkevt-probe.c

@@ -1,56 +0,0 @@
-/*
- * Copyright (c) 2016, Linaro Ltd.  All rights reserved.
- * Daniel Lezcano <daniel.lezcano@linaro.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include <linux/init.h>
-#include <linux/of.h>
-#include <linux/clockchips.h>
-
-extern struct of_device_id __clkevt_of_table[];
-
-static const struct of_device_id __clkevt_of_table_sentinel
-	__used __section(__clkevt_of_table_end);
-
-int __init clockevent_probe(void)
-{
-	struct device_node *np;
-	const struct of_device_id *match;
-	of_init_fn_1_ret init_func;
-	int ret, clockevents = 0;
-
-	for_each_matching_node_and_match(np, __clkevt_of_table, &match) {
-		if (!of_device_is_available(np))
-			continue;
-
-		init_func = match->data;
-
-		ret = init_func(np);
-		if (ret) {
-			pr_warn("Failed to initialize '%s' (%d)\n",
-				np->name, ret);
-			continue;
-		}
-
-		clockevents++;
-	}
-
-	if (!clockevents) {
-		pr_crit("%s: no matching clockevent found\n", __func__);
-		return -ENODEV;
-	}
-
-	return 0;
-}

drivers/clocksource/clksrc-dbx500-prcmu.c

@@ -86,5 +86,5 @@ static int __init clksrc_dbx500_prcmu_init(struct device_node *node)
 #endif
 	return clocksource_register_hz(&clocksource_dbx500_prcmu, RATE_32K);
 }
-CLOCKSOURCE_OF_DECLARE(dbx500_prcmu, "stericsson,db8500-prcmu-timer-4",
+TIMER_OF_DECLARE(dbx500_prcmu, "stericsson,db8500-prcmu-timer-4",
 		       clksrc_dbx500_prcmu_init);

drivers/clocksource/clksrc_st_lpc.c

@@ -132,4 +132,4 @@ static int __init st_clksrc_of_register(struct device_node *np)
 
 	return ret;
 }
-CLOCKSOURCE_OF_DECLARE(ddata, "st,stih407-lpc", st_clksrc_of_register);
+TIMER_OF_DECLARE(ddata, "st,stih407-lpc", st_clksrc_of_register);

drivers/clocksource/clps711x-timer.c

@@ -103,7 +103,7 @@ void __init clps711x_clksrc_init(void __iomem *tc1_base, void __iomem *tc2_base,
 	BUG_ON(_clps711x_clkevt_init(tc2, tc2_base, irq));
 }
 
-#ifdef CONFIG_CLKSRC_OF
+#ifdef CONFIG_TIMER_OF
 static int __init clps711x_timer_init(struct device_node *np)
 {
 	unsigned int irq = irq_of_parse_and_map(np, 0);
@@ -119,5 +119,5 @@ static int __init clps711x_timer_init(struct device_node *np)
 		return -EINVAL;
 	}
 }
-CLOCKSOURCE_OF_DECLARE(clps711x, "cirrus,ep7209-timer", clps711x_timer_init);
+TIMER_OF_DECLARE(clps711x, "cirrus,ep7209-timer", clps711x_timer_init);
 #endif

drivers/clocksource/dw_apb_timer_of.c

@@ -167,7 +167,7 @@ static int __init dw_apb_timer_init(struct device_node *timer)
 
 	return 0;
 }
-CLOCKSOURCE_OF_DECLARE(pc3x2_timer, "picochip,pc3x2-timer", dw_apb_timer_init);
-CLOCKSOURCE_OF_DECLARE(apb_timer_osc, "snps,dw-apb-timer-osc", dw_apb_timer_init);
-CLOCKSOURCE_OF_DECLARE(apb_timer_sp, "snps,dw-apb-timer-sp", dw_apb_timer_init);
-CLOCKSOURCE_OF_DECLARE(apb_timer, "snps,dw-apb-timer", dw_apb_timer_init);
+TIMER_OF_DECLARE(pc3x2_timer, "picochip,pc3x2-timer", dw_apb_timer_init);
+TIMER_OF_DECLARE(apb_timer_osc, "snps,dw-apb-timer-osc", dw_apb_timer_init);
+TIMER_OF_DECLARE(apb_timer_sp, "snps,dw-apb-timer-sp", dw_apb_timer_init);
+TIMER_OF_DECLARE(apb_timer, "snps,dw-apb-timer", dw_apb_timer_init);

drivers/clocksource/exynos_mct.c

@@ -610,5 +610,5 @@ static int __init mct_init_ppi(struct device_node *np)
 {
 	return mct_init_dt(np, MCT_INT_PPI);
 }
-CLOCKSOURCE_OF_DECLARE(exynos4210, "samsung,exynos4210-mct", mct_init_spi);
-CLOCKSOURCE_OF_DECLARE(exynos4412, "samsung,exynos4412-mct", mct_init_ppi);
+TIMER_OF_DECLARE(exynos4210, "samsung,exynos4210-mct", mct_init_spi);
+TIMER_OF_DECLARE(exynos4412, "samsung,exynos4412-mct", mct_init_ppi);

drivers/clocksource/fsl_ftm_timer.c

@@ -369,4 +369,4 @@ err:
 	kfree(priv);
 	return ret;
 }
-CLOCKSOURCE_OF_DECLARE(flextimer, "fsl,ftm-timer", ftm_timer_init);
+TIMER_OF_DECLARE(flextimer, "fsl,ftm-timer", ftm_timer_init);

drivers/clocksource/h8300_timer16.c

@@ -187,5 +187,5 @@ free_clk:
 	return ret;
 }
 
-CLOCKSOURCE_OF_DECLARE(h8300_16bit, "renesas,16bit-timer",
+TIMER_OF_DECLARE(h8300_16bit, "renesas,16bit-timer",
 			   h8300_16timer_init);

drivers/clocksource/h8300_timer8.c

@@ -207,4 +207,4 @@ free_clk:
 	return ret;
 }
 
-CLOCKSOURCE_OF_DECLARE(h8300_8bit, "renesas,8bit-timer", h8300_8timer_init);
+TIMER_OF_DECLARE(h8300_8bit, "renesas,8bit-timer", h8300_8timer_init);

drivers/clocksource/h8300_tpu.c

@@ -154,4 +154,4 @@ free_clk:
 	return ret;
 }
 
-CLOCKSOURCE_OF_DECLARE(h8300_tpu, "renesas,tpu", h8300_tpu_init);
+TIMER_OF_DECLARE(h8300_tpu, "renesas,tpu", h8300_tpu_init);

drivers/clocksource/jcore-pit.c

@@ -246,4 +246,4 @@ static int __init jcore_pit_init(struct device_node *node)
 	return 0;
 }
 
-CLOCKSOURCE_OF_DECLARE(jcore_pit, "jcore,pit", jcore_pit_init);
+TIMER_OF_DECLARE(jcore_pit, "jcore,pit", jcore_pit_init);

drivers/clocksource/meson6_timer.c

@@ -174,5 +174,5 @@ static int __init meson6_timer_init(struct device_node *node)
 					1, 0xfffe);
 	return 0;
 }
-CLOCKSOURCE_OF_DECLARE(meson6, "amlogic,meson6-timer",
+TIMER_OF_DECLARE(meson6, "amlogic,meson6-timer",
 		       meson6_timer_init);

drivers/clocksource/mips-gic-timer.c

@@ -200,5 +200,5 @@ static int __init gic_clocksource_of_init(struct device_node *node)
 
 	return 0;
 }
-CLOCKSOURCE_OF_DECLARE(mips_gic_timer, "mti,gic-timer",
+TIMER_OF_DECLARE(mips_gic_timer, "mti,gic-timer",
 		       gic_clocksource_of_init);

drivers/clocksource/moxart_timer.c

@@ -1,256 +0,0 @@
-/*
- * MOXA ART SoCs timer handling.
- *
- * Copyright (C) 2013 Jonas Jensen
- *
- * Jonas Jensen <jonas.jensen@gmail.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/clk.h>
-#include <linux/clockchips.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/irqreturn.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/io.h>
-#include <linux/clocksource.h>
-#include <linux/bitops.h>
-#include <linux/slab.h>
-
-#define TIMER1_BASE		0x00
-#define TIMER2_BASE		0x10
-#define TIMER3_BASE		0x20
-
-#define REG_COUNT		0x0 /* writable */
-#define REG_LOAD		0x4
-#define REG_MATCH1		0x8
-#define REG_MATCH2		0xC
-
-#define TIMER_CR		0x30
-#define TIMER_INTR_STATE	0x34
-#define TIMER_INTR_MASK		0x38
-
-/*
- * Moxart TIMER_CR flags:
- *
- * MOXART_CR_*_CLOCK	0: PCLK, 1: EXT1CLK
- * MOXART_CR_*_INT	overflow interrupt enable bit
- */
-#define MOXART_CR_1_ENABLE	BIT(0)
-#define MOXART_CR_1_CLOCK	BIT(1)
-#define MOXART_CR_1_INT	BIT(2)
-#define MOXART_CR_2_ENABLE	BIT(3)
-#define MOXART_CR_2_CLOCK	BIT(4)
-#define MOXART_CR_2_INT	BIT(5)
-#define MOXART_CR_3_ENABLE	BIT(6)
-#define MOXART_CR_3_CLOCK	BIT(7)
-#define MOXART_CR_3_INT	BIT(8)
-#define MOXART_CR_COUNT_UP	BIT(9)
-
-#define MOXART_TIMER1_ENABLE	(MOXART_CR_2_ENABLE | MOXART_CR_1_ENABLE)
-#define MOXART_TIMER1_DISABLE	(MOXART_CR_2_ENABLE)
-
-/*
- * The ASpeed variant of the IP block has a different layout
- * for the control register
- */
-#define ASPEED_CR_1_ENABLE	BIT(0)
-#define ASPEED_CR_1_CLOCK	BIT(1)
-#define ASPEED_CR_1_INT		BIT(2)
-#define ASPEED_CR_2_ENABLE	BIT(4)
-#define ASPEED_CR_2_CLOCK	BIT(5)
-#define ASPEED_CR_2_INT		BIT(6)
-#define ASPEED_CR_3_ENABLE	BIT(8)
-#define ASPEED_CR_3_CLOCK	BIT(9)
-#define ASPEED_CR_3_INT		BIT(10)
-
-#define ASPEED_TIMER1_ENABLE   (ASPEED_CR_2_ENABLE | ASPEED_CR_1_ENABLE)
-#define ASPEED_TIMER1_DISABLE  (ASPEED_CR_2_ENABLE)
-
-struct moxart_timer {
-	void __iomem *base;
-	unsigned int t1_disable_val;
-	unsigned int t1_enable_val;
-	unsigned int count_per_tick;
-	struct clock_event_device clkevt;
-};
-
-static inline struct moxart_timer *to_moxart(struct clock_event_device *evt)
-{
-	return container_of(evt, struct moxart_timer, clkevt);
-}
-
-static inline void moxart_disable(struct clock_event_device *evt)
-{
-	struct moxart_timer *timer = to_moxart(evt);
-
-	writel(timer->t1_disable_val, timer->base + TIMER_CR);
-}
-
-static inline void moxart_enable(struct clock_event_device *evt)
-{
-	struct moxart_timer *timer = to_moxart(evt);
-
-	writel(timer->t1_enable_val, timer->base + TIMER_CR);
-}
-
-static int moxart_shutdown(struct clock_event_device *evt)
-{
-	moxart_disable(evt);
-	return 0;
-}
-
-static int moxart_set_oneshot(struct clock_event_device *evt)
-{
-	moxart_disable(evt);
-	writel(~0, to_moxart(evt)->base + TIMER1_BASE + REG_LOAD);
-	return 0;
-}
-
-static int moxart_set_periodic(struct clock_event_device *evt)
-{
-	struct moxart_timer *timer = to_moxart(evt);
-
-	moxart_disable(evt);
-	writel(timer->count_per_tick, timer->base + TIMER1_BASE + REG_LOAD);
-	writel(0, timer->base + TIMER1_BASE + REG_MATCH1);
-	moxart_enable(evt);
-	return 0;
-}
-
-static int moxart_clkevt_next_event(unsigned long cycles,
-				    struct clock_event_device *evt)
-{
-	struct moxart_timer *timer = to_moxart(evt);
-	u32 u;
-
-	moxart_disable(evt);
-
-	u = readl(timer->base + TIMER1_BASE + REG_COUNT) - cycles;
-	writel(u, timer->base + TIMER1_BASE + REG_MATCH1);
-
-	moxart_enable(evt);
-
-	return 0;
-}
-
-static irqreturn_t moxart_timer_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *evt = dev_id;
-	evt->event_handler(evt);
-	return IRQ_HANDLED;
-}
-
-static int __init moxart_timer_init(struct device_node *node)
-{
-	int ret, irq;
-	unsigned long pclk;
-	struct clk *clk;
-	struct moxart_timer *timer;
-
-	timer = kzalloc(sizeof(*timer), GFP_KERNEL);
-	if (!timer)
-		return -ENOMEM;
-
-	timer->base = of_iomap(node, 0);
-	if (!timer->base) {
-		pr_err("%s: of_iomap failed\n", node->full_name);
-		ret = -ENXIO;
-		goto out_free;
-	}
-
-	irq = irq_of_parse_and_map(node, 0);
-	if (irq <= 0) {
-		pr_err("%s: irq_of_parse_and_map failed\n", node->full_name);
-		ret = -EINVAL;
-		goto out_unmap;
-	}
-
-	clk = of_clk_get(node, 0);
-	if (IS_ERR(clk))  {
-		pr_err("%s: of_clk_get failed\n", node->full_name);
-		ret = PTR_ERR(clk);
-		goto out_unmap;
-	}
-
-	pclk = clk_get_rate(clk);
-
-	if (of_device_is_compatible(node, "moxa,moxart-timer")) {
-		timer->t1_enable_val = MOXART_TIMER1_ENABLE;
-		timer->t1_disable_val = MOXART_TIMER1_DISABLE;
-	} else if (of_device_is_compatible(node, "aspeed,ast2400-timer")) {
-		timer->t1_enable_val = ASPEED_TIMER1_ENABLE;
-		timer->t1_disable_val = ASPEED_TIMER1_DISABLE;
-	} else {
-		pr_err("%s: unknown platform\n", node->full_name);
-		ret = -EINVAL;
-		goto out_unmap;
-	}
-
-	timer->count_per_tick = DIV_ROUND_CLOSEST(pclk, HZ);
-
-	timer->clkevt.name = node->name;
-	timer->clkevt.rating = 200;
-	timer->clkevt.features = CLOCK_EVT_FEAT_PERIODIC |
-					CLOCK_EVT_FEAT_ONESHOT;
-	timer->clkevt.set_state_shutdown = moxart_shutdown;
-	timer->clkevt.set_state_periodic = moxart_set_periodic;
-	timer->clkevt.set_state_oneshot = moxart_set_oneshot;
-	timer->clkevt.tick_resume = moxart_set_oneshot;
-	timer->clkevt.set_next_event = moxart_clkevt_next_event;
-	timer->clkevt.cpumask = cpumask_of(0);
-	timer->clkevt.irq = irq;
-
-	ret = clocksource_mmio_init(timer->base + TIMER2_BASE + REG_COUNT,
-				    "moxart_timer", pclk, 200, 32,
-				    clocksource_mmio_readl_down);
-	if (ret) {
-		pr_err("%s: clocksource_mmio_init failed\n", node->full_name);
-		goto out_unmap;
-	}
-
-	ret = request_irq(irq, moxart_timer_interrupt, IRQF_TIMER,
-			  node->name, &timer->clkevt);
-	if (ret) {
-		pr_err("%s: setup_irq failed\n", node->full_name);
-		goto out_unmap;
-	}
-
-	/* Clear match registers */
-	writel(0, timer->base + TIMER1_BASE + REG_MATCH1);
-	writel(0, timer->base + TIMER1_BASE + REG_MATCH2);
-	writel(0, timer->base + TIMER2_BASE + REG_MATCH1);
-	writel(0, timer->base + TIMER2_BASE + REG_MATCH2);
-
-	/*
-	 * Start timer 2 rolling as our main wall clock source, keep timer 1
-	 * disabled
-	 */
-	writel(0, timer->base + TIMER_CR);
-	writel(~0, timer->base + TIMER2_BASE + REG_LOAD);
-	writel(timer->t1_disable_val, timer->base + TIMER_CR);
-
-	/*
-	 * documentation is not publicly available:
-	 * min_delta / max_delta obtained by trial-and-error,
-	 * max_delta 0xfffffffe should be ok because count
-	 * register size is u32
-	 */
-	clockevents_config_and_register(&timer->clkevt, pclk, 0x4, 0xfffffffe);
-
-	return 0;
-
-out_unmap:
-	iounmap(timer->base);
-out_free:
-	kfree(timer);
-	return ret;
-}
-CLOCKSOURCE_OF_DECLARE(moxart, "moxa,moxart-timer", moxart_timer_init);
-CLOCKSOURCE_OF_DECLARE(aspeed, "aspeed,ast2400-timer", moxart_timer_init);

drivers/clocksource/mps2-timer.c

@@ -274,4 +274,4 @@ static int __init mps2_timer_init(struct device_node *np)
 	return 0;
 }
 
-CLOCKSOURCE_OF_DECLARE(mps2_timer, "arm,mps2-timer", mps2_timer_init);
+TIMER_OF_DECLARE(mps2_timer, "arm,mps2-timer", mps2_timer_init);

drivers/clocksource/mtk_timer.c

@@ -265,4 +265,4 @@ err_kzalloc:
 
 	return -EINVAL;
 }
-CLOCKSOURCE_OF_DECLARE(mtk_mt6577, "mediatek,mt6577-timer", mtk_timer_init);
+TIMER_OF_DECLARE(mtk_mt6577, "mediatek,mt6577-timer", mtk_timer_init);

drivers/clocksource/mxs_timer.c

@@ -293,4 +293,4 @@ static int __init mxs_timer_init(struct device_node *np)
 
 	return setup_irq(irq, &mxs_timer_irq);
 }
-CLOCKSOURCE_OF_DECLARE(mxs, "fsl,timrot", mxs_timer_init);
+TIMER_OF_DECLARE(mxs, "fsl,timrot", mxs_timer_init);

drivers/clocksource/nomadik-mtu.c

@@ -284,5 +284,5 @@ static int __init nmdk_timer_of_init(struct device_node *node)
 
 	return nmdk_timer_init(base, irq, pclk, clk);
 }
-CLOCKSOURCE_OF_DECLARE(nomadik_mtu, "st,nomadik-mtu",
+TIMER_OF_DECLARE(nomadik_mtu, "st,nomadik-mtu",
 		       nmdk_timer_of_init);

drivers/clocksource/pxa_timer.c

@@ -216,7 +216,7 @@ static int __init pxa_timer_dt_init(struct device_node *np)
 
 	return pxa_timer_common_init(irq, clk_get_rate(clk));
 }
-CLOCKSOURCE_OF_DECLARE(pxa_timer, "marvell,pxa-timer", pxa_timer_dt_init);
+TIMER_OF_DECLARE(pxa_timer, "marvell,pxa-timer", pxa_timer_dt_init);
 
 /*
  * Legacy timer init for non device-tree boards.

drivers/clocksource/qcom-timer.c

@@ -254,5 +254,5 @@ static int __init msm_dt_timer_init(struct device_node *np)
 
 	return msm_timer_init(freq, 32, irq, !!percpu_offset);
 }
-CLOCKSOURCE_OF_DECLARE(kpss_timer, "qcom,kpss-timer", msm_dt_timer_init);
-CLOCKSOURCE_OF_DECLARE(scss_timer, "qcom,scss-timer", msm_dt_timer_init);
+TIMER_OF_DECLARE(kpss_timer, "qcom,kpss-timer", msm_dt_timer_init);
+TIMER_OF_DECLARE(scss_timer, "qcom,scss-timer", msm_dt_timer_init);

drivers/clocksource/renesas-ostm.c

@@ -262,4 +262,4 @@ err:
 	return 0;
 }
 
-CLOCKSOURCE_OF_DECLARE(ostm, "renesas,ostm", ostm_init);
+TIMER_OF_DECLARE(ostm, "renesas,ostm", ostm_init);

drivers/clocksource/rockchip_timer.c

@@ -303,5 +303,5 @@ static int __init rk_timer_init(struct device_node *np)
 	return -EINVAL;
 }
 
-CLOCKSOURCE_OF_DECLARE(rk3288_timer, "rockchip,rk3288-timer", rk_timer_init);
-CLOCKSOURCE_OF_DECLARE(rk3399_timer, "rockchip,rk3399-timer", rk_timer_init);
+TIMER_OF_DECLARE(rk3288_timer, "rockchip,rk3288-timer", rk_timer_init);
+TIMER_OF_DECLARE(rk3399_timer, "rockchip,rk3399-timer", rk_timer_init);

drivers/clocksource/samsung_pwm_timer.c

@@ -418,7 +418,7 @@ void __init samsung_pwm_clocksource_init(void __iomem *base,
 	_samsung_pwm_clocksource_init();
 }
 
-#ifdef CONFIG_CLKSRC_OF
+#ifdef CONFIG_TIMER_OF
 static int __init samsung_pwm_alloc(struct device_node *np,
 				    const struct samsung_pwm_variant *variant)
 {
@@ -466,7 +466,7 @@ static int __init s3c2410_pwm_clocksource_init(struct device_node *np)
 {
 	return samsung_pwm_alloc(np, &s3c24xx_variant);
 }
-CLOCKSOURCE_OF_DECLARE(s3c2410_pwm, "samsung,s3c2410-pwm", s3c2410_pwm_clocksource_init);
+TIMER_OF_DECLARE(s3c2410_pwm, "samsung,s3c2410-pwm", s3c2410_pwm_clocksource_init);
 
 static const struct samsung_pwm_variant s3c64xx_variant = {
 	.bits		= 32,
@@ -479,7 +479,7 @@ static int __init s3c64xx_pwm_clocksource_init(struct device_node *np)
 {
 	return samsung_pwm_alloc(np, &s3c64xx_variant);
 }
-CLOCKSOURCE_OF_DECLARE(s3c6400_pwm, "samsung,s3c6400-pwm", s3c64xx_pwm_clocksource_init);
+TIMER_OF_DECLARE(s3c6400_pwm, "samsung,s3c6400-pwm", s3c64xx_pwm_clocksource_init);
 
 static const struct samsung_pwm_variant s5p64x0_variant = {
 	.bits		= 32,
@@ -492,7 +492,7 @@ static int __init s5p64x0_pwm_clocksource_init(struct device_node *np)
 {
 	return samsung_pwm_alloc(np, &s5p64x0_variant);
 }
-CLOCKSOURCE_OF_DECLARE(s5p6440_pwm, "samsung,s5p6440-pwm", s5p64x0_pwm_clocksource_init);
+TIMER_OF_DECLARE(s5p6440_pwm, "samsung,s5p6440-pwm", s5p64x0_pwm_clocksource_init);
 
 static const struct samsung_pwm_variant s5p_variant = {
 	.bits		= 32,
@@ -505,5 +505,5 @@ static int __init s5p_pwm_clocksource_init(struct device_node *np)
 {
 	return samsung_pwm_alloc(np, &s5p_variant);
 }
-CLOCKSOURCE_OF_DECLARE(s5pc100_pwm, "samsung,s5pc100-pwm", s5p_pwm_clocksource_init);
+TIMER_OF_DECLARE(s5pc100_pwm, "samsung,s5pc100-pwm", s5p_pwm_clocksource_init);
 #endif

drivers/clocksource/sun4i_timer.c

@@ -233,5 +233,5 @@ static int __init sun4i_timer_init(struct device_node *node)
 
 	return ret;
 }
-CLOCKSOURCE_OF_DECLARE(sun4i, "allwinner,sun4i-a10-timer",
+TIMER_OF_DECLARE(sun4i, "allwinner,sun4i-a10-timer",
 		       sun4i_timer_init);

drivers/clocksource/tango_xtal.c

@@ -53,4 +53,4 @@ static int __init tango_clocksource_init(struct device_node *np)
 	return 0;
 }
 
-CLOCKSOURCE_OF_DECLARE(tango, "sigma,tick-counter", tango_clocksource_init);
+TIMER_OF_DECLARE(tango, "sigma,tick-counter", tango_clocksource_init);

drivers/clocksource/tcb_clksrc.c

@@ -9,6 +9,7 @@
 #include <linux/ioport.h>
 #include <linux/io.h>
 #include <linux/platform_device.h>
+#include <linux/syscore_ops.h>
 #include <linux/atmel_tc.h>
 
 
@@ -40,6 +41,14 @@
  */
 
 static void __iomem *tcaddr;
+static struct
+{
+	u32 cmr;
+	u32 imr;
+	u32 rc;
+	bool clken;
+} tcb_cache[3];
+static u32 bmr_cache;
 
 static u64 tc_get_cycles(struct clocksource *cs)
 {
@@ -61,12 +70,54 @@ static u64 tc_get_cycles32(struct clocksource *cs)
 	return __raw_readl(tcaddr + ATMEL_TC_REG(0, CV));
 }
 
+void tc_clksrc_suspend(struct clocksource *cs)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(tcb_cache); i++) {
+		tcb_cache[i].cmr = readl(tcaddr + ATMEL_TC_REG(i, CMR));
+		tcb_cache[i].imr = readl(tcaddr + ATMEL_TC_REG(i, IMR));
+		tcb_cache[i].rc = readl(tcaddr + ATMEL_TC_REG(i, RC));
+		tcb_cache[i].clken = !!(readl(tcaddr + ATMEL_TC_REG(i, SR)) &
+					ATMEL_TC_CLKSTA);
+	}
+
+	bmr_cache = readl(tcaddr + ATMEL_TC_BMR);
+}
+
+void tc_clksrc_resume(struct clocksource *cs)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(tcb_cache); i++) {
+		/* Restore registers for the channel, RA and RB are not used  */
+		writel(tcb_cache[i].cmr, tcaddr + ATMEL_TC_REG(i, CMR));
+		writel(tcb_cache[i].rc, tcaddr + ATMEL_TC_REG(i, RC));
+		writel(0, tcaddr + ATMEL_TC_REG(i, RA));
+		writel(0, tcaddr + ATMEL_TC_REG(i, RB));
+		/* Disable all the interrupts */
+		writel(0xff, tcaddr + ATMEL_TC_REG(i, IDR));
+		/* Reenable interrupts that were enabled before suspending */
+		writel(tcb_cache[i].imr, tcaddr + ATMEL_TC_REG(i, IER));
+		/* Start the clock if it was used */
+		if (tcb_cache[i].clken)
+			writel(ATMEL_TC_CLKEN, tcaddr + ATMEL_TC_REG(i, CCR));
+	}
+
+	/* Dual channel, chain channels */
+	writel(bmr_cache, tcaddr + ATMEL_TC_BMR);
+	/* Finally, trigger all the channels*/
+	writel(ATMEL_TC_SYNC, tcaddr + ATMEL_TC_BCR);
+}
+
 static struct clocksource clksrc = {
 	.name           = "tcb_clksrc",
 	.rating         = 200,
 	.read           = tc_get_cycles,
 	.mask           = CLOCKSOURCE_MASK(32),
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+	.suspend	= tc_clksrc_suspend,
+	.resume		= tc_clksrc_resume,
 };
 
 #ifdef CONFIG_GENERIC_CLOCKEVENTS

drivers/clocksource/tegra20_timer.c

@@ -237,7 +237,7 @@ static int __init tegra20_init_timer(struct device_node *np)
 
 	return 0;
 }
-CLOCKSOURCE_OF_DECLARE(tegra20_timer, "nvidia,tegra20-timer", tegra20_init_timer);
+TIMER_OF_DECLARE(tegra20_timer, "nvidia,tegra20-timer", tegra20_init_timer);
 
 static int __init tegra20_init_rtc(struct device_node *np)
 {
@@ -261,4 +261,4 @@ static int __init tegra20_init_rtc(struct device_node *np)
 
 	return register_persistent_clock(NULL, tegra_read_persistent_clock64);
 }
-CLOCKSOURCE_OF_DECLARE(tegra20_rtc, "nvidia,tegra20-rtc", tegra20_init_rtc);
+TIMER_OF_DECLARE(tegra20_rtc, "nvidia,tegra20-rtc", tegra20_init_rtc);

drivers/clocksource/time-armada-370-xp.c

@@ -351,7 +351,7 @@ static int __init armada_xp_timer_init(struct device_node *np)
 
 	return armada_370_xp_timer_common_init(np);
 }
-CLOCKSOURCE_OF_DECLARE(armada_xp, "marvell,armada-xp-timer",
+TIMER_OF_DECLARE(armada_xp, "marvell,armada-xp-timer",
 		       armada_xp_timer_init);
 
 static int __init armada_375_timer_init(struct device_node *np)
@@ -389,7 +389,7 @@ static int __init armada_375_timer_init(struct device_node *np)
 
 	return armada_370_xp_timer_common_init(np);
 }
-CLOCKSOURCE_OF_DECLARE(armada_375, "marvell,armada-375-timer",
+TIMER_OF_DECLARE(armada_375, "marvell,armada-375-timer",
 		       armada_375_timer_init);
 
 static int __init armada_370_timer_init(struct device_node *np)
@@ -412,5 +412,5 @@ static int __init armada_370_timer_init(struct device_node *np)
 
 	return armada_370_xp_timer_common_init(np);
 }
-CLOCKSOURCE_OF_DECLARE(armada_370, "marvell,armada-370-timer",
+TIMER_OF_DECLARE(armada_370, "marvell,armada-370-timer",
 		       armada_370_timer_init);

drivers/clocksource/time-efm32.c

@@ -283,5 +283,5 @@ static int __init efm32_timer_init(struct device_node *np)
 
 	return ret;
 }
-CLOCKSOURCE_OF_DECLARE(efm32compat, "efm32,timer", efm32_timer_init);
-CLOCKSOURCE_OF_DECLARE(efm32, "energymicro,efm32-timer", efm32_timer_init);
+TIMER_OF_DECLARE(efm32compat, "efm32,timer", efm32_timer_init);
+TIMER_OF_DECLARE(efm32, "energymicro,efm32-timer", efm32_timer_init);

drivers/clocksource/time-lpc32xx.c

@@ -311,4 +311,4 @@ static int __init lpc32xx_timer_init(struct device_node *np)
 
 	return ret;
 }
-CLOCKSOURCE_OF_DECLARE(lpc32xx_timer, "nxp,lpc3220-timer", lpc32xx_timer_init);
+TIMER_OF_DECLARE(lpc32xx_timer, "nxp,lpc3220-timer", lpc32xx_timer_init);

drivers/clocksource/time-orion.c

@@ -189,4 +189,4 @@ static int __init orion_timer_init(struct device_node *np)
 
 	return 0;
 }
-CLOCKSOURCE_OF_DECLARE(orion_timer, "marvell,orion-timer", orion_timer_init);
+TIMER_OF_DECLARE(orion_timer, "marvell,orion-timer", orion_timer_init);

drivers/clocksource/time-pistachio.c

@@ -214,5 +214,5 @@ static int __init pistachio_clksrc_of_init(struct device_node *node)
 	sched_clock_register(pistachio_read_sched_clock, 32, rate);
 	return clocksource_register_hz(&pcs_gpt.cs, rate);
 }
-CLOCKSOURCE_OF_DECLARE(pistachio_gptimer, "img,pistachio-gptimer",
+TIMER_OF_DECLARE(pistachio_gptimer, "img,pistachio-gptimer",
 		       pistachio_clksrc_of_init);

drivers/clocksource/timer-atlas7.c

@@ -283,4 +283,4 @@ static int __init sirfsoc_of_timer_init(struct device_node *np)
 
 	return sirfsoc_atlas7_timer_init(np);
 }
-CLOCKSOURCE_OF_DECLARE(sirfsoc_atlas7_timer, "sirf,atlas7-tick", sirfsoc_of_timer_init);
+TIMER_OF_DECLARE(sirfsoc_atlas7_timer, "sirf,atlas7-tick", sirfsoc_of_timer_init);

drivers/clocksource/timer-atmel-pit.c

@@ -255,5 +255,5 @@ static int __init at91sam926x_pit_dt_init(struct device_node *node)
 
 	return 0;
 }
-CLOCKSOURCE_OF_DECLARE(at91sam926x_pit, "atmel,at91sam9260-pit",
+TIMER_OF_DECLARE(at91sam926x_pit, "atmel,at91sam9260-pit",
 		       at91sam926x_pit_dt_init);

drivers/clocksource/timer-atmel-st.c

@@ -260,5 +260,5 @@ static int __init atmel_st_timer_init(struct device_node *node)
 	/* register clocksource */
 	return clocksource_register_hz(&clk32k, sclk_rate);
 }
-CLOCKSOURCE_OF_DECLARE(atmel_st_timer, "atmel,at91rm9200-st",
+TIMER_OF_DECLARE(atmel_st_timer, "atmel,at91rm9200-st",
 		       atmel_st_timer_init);

drivers/clocksource/timer-digicolor.c

@@ -203,5 +203,5 @@ static int __init digicolor_timer_init(struct device_node *node)
 
 	return 0;
 }
-CLOCKSOURCE_OF_DECLARE(conexant_digicolor, "cnxt,cx92755-timer",
+TIMER_OF_DECLARE(conexant_digicolor, "cnxt,cx92755-timer",
 		       digicolor_timer_init);

drivers/clocksource/timer-fttmr010.c

@@ -11,12 +11,13 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
-#include <linux/mfd/syscon.h>
-#include <linux/regmap.h>
 #include <linux/clockchips.h>
 #include <linux/clocksource.h>
 #include <linux/sched_clock.h>
 #include <linux/clk.h>
+#include <linux/slab.h>
+#include <linux/bitops.h>
+#include <linux/delay.h>
 
 /*
  * Register definitions for the timers
@@ -37,267 +38,368 @@
 #define TIMER_INTR_STATE	(0x34)
 #define TIMER_INTR_MASK		(0x38)
 
-#define TIMER_1_CR_ENABLE	(1 << 0)
-#define TIMER_1_CR_CLOCK	(1 << 1)
-#define TIMER_1_CR_INT		(1 << 2)
-#define TIMER_2_CR_ENABLE	(1 << 3)
-#define TIMER_2_CR_CLOCK	(1 << 4)
-#define TIMER_2_CR_INT		(1 << 5)
-#define TIMER_3_CR_ENABLE	(1 << 6)
-#define TIMER_3_CR_CLOCK	(1 << 7)
-#define TIMER_3_CR_INT		(1 << 8)
-#define TIMER_1_CR_UPDOWN	(1 << 9)
-#define TIMER_2_CR_UPDOWN	(1 << 10)
-#define TIMER_3_CR_UPDOWN	(1 << 11)
-#define TIMER_DEFAULT_FLAGS	(TIMER_1_CR_UPDOWN | \
-				 TIMER_3_CR_ENABLE | \
-				 TIMER_3_CR_UPDOWN)
-
-#define TIMER_1_INT_MATCH1	(1 << 0)
-#define TIMER_1_INT_MATCH2	(1 << 1)
-#define TIMER_1_INT_OVERFLOW	(1 << 2)
-#define TIMER_2_INT_MATCH1	(1 << 3)
-#define TIMER_2_INT_MATCH2	(1 << 4)
-#define TIMER_2_INT_OVERFLOW	(1 << 5)
-#define TIMER_3_INT_MATCH1	(1 << 6)
-#define TIMER_3_INT_MATCH2	(1 << 7)
-#define TIMER_3_INT_OVERFLOW	(1 << 8)
+#define TIMER_1_CR_ENABLE	BIT(0)
+#define TIMER_1_CR_CLOCK	BIT(1)
+#define TIMER_1_CR_INT		BIT(2)
+#define TIMER_2_CR_ENABLE	BIT(3)
+#define TIMER_2_CR_CLOCK	BIT(4)
+#define TIMER_2_CR_INT		BIT(5)
+#define TIMER_3_CR_ENABLE	BIT(6)
+#define TIMER_3_CR_CLOCK	BIT(7)
+#define TIMER_3_CR_INT		BIT(8)
+#define TIMER_1_CR_UPDOWN	BIT(9)
+#define TIMER_2_CR_UPDOWN	BIT(10)
+#define TIMER_3_CR_UPDOWN	BIT(11)
+
+/*
+ * The Aspeed AST2400 moves bits around in the control register
+ * and lacks bits for setting the timer to count upwards.
+ */
+#define TIMER_1_CR_ASPEED_ENABLE	BIT(0)
+#define TIMER_1_CR_ASPEED_CLOCK		BIT(1)
+#define TIMER_1_CR_ASPEED_INT		BIT(2)
+#define TIMER_2_CR_ASPEED_ENABLE	BIT(4)
+#define TIMER_2_CR_ASPEED_CLOCK		BIT(5)
+#define TIMER_2_CR_ASPEED_INT		BIT(6)
+#define TIMER_3_CR_ASPEED_ENABLE	BIT(8)
+#define TIMER_3_CR_ASPEED_CLOCK		BIT(9)
+#define TIMER_3_CR_ASPEED_INT		BIT(10)
+
+#define TIMER_1_INT_MATCH1	BIT(0)
+#define TIMER_1_INT_MATCH2	BIT(1)
+#define TIMER_1_INT_OVERFLOW	BIT(2)
+#define TIMER_2_INT_MATCH1	BIT(3)
+#define TIMER_2_INT_MATCH2	BIT(4)
+#define TIMER_2_INT_OVERFLOW	BIT(5)
+#define TIMER_3_INT_MATCH1	BIT(6)
+#define TIMER_3_INT_MATCH2	BIT(7)
+#define TIMER_3_INT_OVERFLOW	BIT(8)
 #define TIMER_INT_ALL_MASK	0x1ff
 
-static unsigned int tick_rate;
-static void __iomem *base;
+struct fttmr010 {
+	void __iomem *base;
+	unsigned int tick_rate;
+	bool count_down;
+	u32 t1_enable_val;
+	struct clock_event_device clkevt;
+#ifdef CONFIG_ARM
+	struct delay_timer delay_timer;
+#endif
+};
+
+/*
+ * A local singleton used by sched_clock and delay timer reads, which are
+ * fast and stateless
+ */
+static struct fttmr010 *local_fttmr;
+
+static inline struct fttmr010 *to_fttmr010(struct clock_event_device *evt)
+{
+	return container_of(evt, struct fttmr010, clkevt);
+}
+
+static unsigned long fttmr010_read_current_timer_up(void)
+{
+	return readl(local_fttmr->base + TIMER2_COUNT);
+}
+
+static unsigned long fttmr010_read_current_timer_down(void)
+{
+	return ~readl(local_fttmr->base + TIMER2_COUNT);
+}
+
+static u64 notrace fttmr010_read_sched_clock_up(void)
+{
+	return fttmr010_read_current_timer_up();
+}
 
-static u64 notrace fttmr010_read_sched_clock(void)
+static u64 notrace fttmr010_read_sched_clock_down(void)
 {
-	return readl(base + TIMER3_COUNT);
+	return fttmr010_read_current_timer_down();
 }
 
 static int fttmr010_timer_set_next_event(unsigned long cycles,
 				       struct clock_event_device *evt)
 {
+	struct fttmr010 *fttmr010 = to_fttmr010(evt);
 	u32 cr;
 
-	/* Setup the match register */
-	cr = readl(base + TIMER1_COUNT);
-	writel(cr + cycles, base + TIMER1_MATCH1);
-	if (readl(base + TIMER1_COUNT) - cr > cycles)
-		return -ETIME;
+	/* Stop */
+	cr = readl(fttmr010->base + TIMER_CR);
+	cr &= ~fttmr010->t1_enable_val;
+	writel(cr, fttmr010->base + TIMER_CR);
+
+	/* Setup the match register forward/backward in time */
+	cr = readl(fttmr010->base + TIMER1_COUNT);
+	if (fttmr010->count_down)
+		cr -= cycles;
+	else
+		cr += cycles;
+	writel(cr, fttmr010->base + TIMER1_MATCH1);
+
+	/* Start */
+	cr = readl(fttmr010->base + TIMER_CR);
+	cr |= fttmr010->t1_enable_val;
+	writel(cr, fttmr010->base + TIMER_CR);
 
 	return 0;
 }
 
 static int fttmr010_timer_shutdown(struct clock_event_device *evt)
 {
+	struct fttmr010 *fttmr010 = to_fttmr010(evt);
 	u32 cr;
 
-	/*
-	 * Disable also for oneshot: the set_next() call will arm the timer
-	 * instead.
-	 */
-	/* Stop timer and interrupt. */
-	cr = readl(base + TIMER_CR);
-	cr &= ~(TIMER_1_CR_ENABLE | TIMER_1_CR_INT);
-	writel(cr, base + TIMER_CR);
+	/* Stop */
+	cr = readl(fttmr010->base + TIMER_CR);
+	cr &= ~fttmr010->t1_enable_val;
+	writel(cr, fttmr010->base + TIMER_CR);
+
+	return 0;
+}
+
+static int fttmr010_timer_set_oneshot(struct clock_event_device *evt)
+{
+	struct fttmr010 *fttmr010 = to_fttmr010(evt);
+	u32 cr;
+
+	/* Stop */
+	cr = readl(fttmr010->base + TIMER_CR);
+	cr &= ~fttmr010->t1_enable_val;
+	writel(cr, fttmr010->base + TIMER_CR);
 
-	/* Setup counter start from 0 */
-	writel(0, base + TIMER1_COUNT);
-	writel(0, base + TIMER1_LOAD);
+	/* Setup counter start from 0 or ~0 */
+	writel(0, fttmr010->base + TIMER1_COUNT);
+	if (fttmr010->count_down)
+		writel(~0, fttmr010->base + TIMER1_LOAD);
+	else
+		writel(0, fttmr010->base + TIMER1_LOAD);
 
-	/* enable interrupt */
-	cr = readl(base + TIMER_INTR_MASK);
+	/* Enable interrupt */
+	cr = readl(fttmr010->base + TIMER_INTR_MASK);
 	cr &= ~(TIMER_1_INT_OVERFLOW | TIMER_1_INT_MATCH2);
 	cr |= TIMER_1_INT_MATCH1;
-	writel(cr, base + TIMER_INTR_MASK);
-
-	/* start the timer */
-	cr = readl(base + TIMER_CR);
-	cr |= TIMER_1_CR_ENABLE;
-	writel(cr, base + TIMER_CR);
+	writel(cr, fttmr010->base + TIMER_INTR_MASK);
 
 	return 0;
 }
 
 static int fttmr010_timer_set_periodic(struct clock_event_device *evt)
 {
-	u32 period = DIV_ROUND_CLOSEST(tick_rate, HZ);
+	struct fttmr010 *fttmr010 = to_fttmr010(evt);
+	u32 period = DIV_ROUND_CLOSEST(fttmr010->tick_rate, HZ);
 	u32 cr;
 
-	/* Stop timer and interrupt */
-	cr = readl(base + TIMER_CR);
-	cr &= ~(TIMER_1_CR_ENABLE | TIMER_1_CR_INT);
-	writel(cr, base + TIMER_CR);
-
-	/* Setup timer to fire at 1/HT intervals. */
-	cr = 0xffffffff - (period - 1);
-	writel(cr, base + TIMER1_COUNT);
-	writel(cr, base + TIMER1_LOAD);
-
-	/* enable interrupt on overflow */
-	cr = readl(base + TIMER_INTR_MASK);
-	cr &= ~(TIMER_1_INT_MATCH1 | TIMER_1_INT_MATCH2);
-	cr |= TIMER_1_INT_OVERFLOW;
-	writel(cr, base + TIMER_INTR_MASK);
+	/* Stop */
+	cr = readl(fttmr010->base + TIMER_CR);
+	cr &= ~fttmr010->t1_enable_val;
+	writel(cr, fttmr010->base + TIMER_CR);
+
+	/* Setup timer to fire at 1/HZ intervals. */
+	if (fttmr010->count_down) {
+		writel(period, fttmr010->base + TIMER1_LOAD);
+		writel(0, fttmr010->base + TIMER1_MATCH1);
+	} else {
+		cr = 0xffffffff - (period - 1);
+		writel(cr, fttmr010->base + TIMER1_COUNT);
+		writel(cr, fttmr010->base + TIMER1_LOAD);
+
+		/* Enable interrupt on overflow */
+		cr = readl(fttmr010->base + TIMER_INTR_MASK);
+		cr &= ~(TIMER_1_INT_MATCH1 | TIMER_1_INT_MATCH2);
+		cr |= TIMER_1_INT_OVERFLOW;
+		writel(cr, fttmr010->base + TIMER_INTR_MASK);
+	}
 
 	/* Start the timer */
-	cr = readl(base + TIMER_CR);
-	cr |= TIMER_1_CR_ENABLE;
-	cr |= TIMER_1_CR_INT;
-	writel(cr, base + TIMER_CR);
+	cr = readl(fttmr010->base + TIMER_CR);
+	cr |= fttmr010->t1_enable_val;
+	writel(cr, fttmr010->base + TIMER_CR);
 
 	return 0;
 }
 
-/* Use TIMER1 as clock event */
-static struct clock_event_device fttmr010_clockevent = {
-	.name			= "TIMER1",
-	/* Reasonably fast and accurate clock event */
-	.rating			= 300,
-	.shift                  = 32,
-	.features		= CLOCK_EVT_FEAT_PERIODIC |
-				  CLOCK_EVT_FEAT_ONESHOT,
-	.set_next_event		= fttmr010_timer_set_next_event,
-	.set_state_shutdown	= fttmr010_timer_shutdown,
-	.set_state_periodic	= fttmr010_timer_set_periodic,
-	.set_state_oneshot	= fttmr010_timer_shutdown,
-	.tick_resume		= fttmr010_timer_shutdown,
-};
-
 /*
  * IRQ handler for the timer
  */
 static irqreturn_t fttmr010_timer_interrupt(int irq, void *dev_id)
 {
-	struct clock_event_device *evt = &fttmr010_clockevent;
+	struct clock_event_device *evt = dev_id;
 
 	evt->event_handler(evt);
 	return IRQ_HANDLED;
 }
 
-static struct irqaction fttmr010_timer_irq = {
-	.name		= "Faraday FTTMR010 Timer Tick",
-	.flags		= IRQF_TIMER,
-	.handler	= fttmr010_timer_interrupt,
-};
-
-static int __init fttmr010_timer_common_init(struct device_node *np)
+static int __init fttmr010_common_init(struct device_node *np, bool is_aspeed)
 {
+	struct fttmr010 *fttmr010;
 	int irq;
+	struct clk *clk;
+	int ret;
+	u32 val;
+
+	/*
+	 * These implementations require a clock reference.
+	 * FIXME: we currently only support clocking using PCLK
+	 * and using EXTCLK is not supported in the driver.
+	 */
+	clk = of_clk_get_by_name(np, "PCLK");
+	if (IS_ERR(clk)) {
+		pr_err("could not get PCLK\n");
+		return PTR_ERR(clk);
+	}
+	ret = clk_prepare_enable(clk);
+	if (ret) {
+		pr_err("failed to enable PCLK\n");
+		return ret;
+	}
 
-	base = of_iomap(np, 0);
-	if (!base) {
+	fttmr010 = kzalloc(sizeof(*fttmr010), GFP_KERNEL);
+	if (!fttmr010) {
+		ret = -ENOMEM;
+		goto out_disable_clock;
+	}
+	fttmr010->tick_rate = clk_get_rate(clk);
+
+	fttmr010->base = of_iomap(np, 0);
+	if (!fttmr010->base) {
 		pr_err("Can't remap registers");
-		return -ENXIO;
+		ret = -ENXIO;
+		goto out_free;
 	}
 	/* IRQ for timer 1 */
 	irq = irq_of_parse_and_map(np, 0);
 	if (irq <= 0) {
 		pr_err("Can't parse IRQ");
-		return -EINVAL;
+		ret = -EINVAL;
+		goto out_unmap;
+	}
+
+	/*
+	 * The Aspeed AST2400 moves bits around in the control register,
+	 * otherwise it works the same.
+	 */
+	if (is_aspeed) {
+		fttmr010->t1_enable_val = TIMER_1_CR_ASPEED_ENABLE |
+			TIMER_1_CR_ASPEED_INT;
+		/* Downward not available */
+		fttmr010->count_down = true;
+	} else {
+		fttmr010->t1_enable_val = TIMER_1_CR_ENABLE | TIMER_1_CR_INT;
 	}
 
 	/*
 	 * Reset the interrupt mask and status
 	 */
-	writel(TIMER_INT_ALL_MASK, base + TIMER_INTR_MASK);
-	writel(0, base + TIMER_INTR_STATE);
-	writel(TIMER_DEFAULT_FLAGS, base + TIMER_CR);
+	writel(TIMER_INT_ALL_MASK, fttmr010->base + TIMER_INTR_MASK);
+	writel(0, fttmr010->base + TIMER_INTR_STATE);
+
+	/*
+	 * Enable timer 1 count up, timer 2 count up, except on Aspeed,
+	 * where everything just counts down.
+	 */
+	if (is_aspeed)
+		val = TIMER_2_CR_ASPEED_ENABLE;
+	else {
+		val = TIMER_2_CR_ENABLE;
+		if (!fttmr010->count_down)
+			val |= TIMER_1_CR_UPDOWN | TIMER_2_CR_UPDOWN;
+	}
+	writel(val, fttmr010->base + TIMER_CR);
 
 	/*
 	 * Setup free-running clocksource timer (interrupts
 	 * disabled.)
 	 */
-	writel(0, base + TIMER3_COUNT);
-	writel(0, base + TIMER3_LOAD);
-	writel(0, base + TIMER3_MATCH1);
-	writel(0, base + TIMER3_MATCH2);
-	clocksource_mmio_init(base + TIMER3_COUNT,
-			      "fttmr010_clocksource", tick_rate,
-			      300, 32, clocksource_mmio_readl_up);
-	sched_clock_register(fttmr010_read_sched_clock, 32, tick_rate);
+	local_fttmr = fttmr010;
+	writel(0, fttmr010->base + TIMER2_COUNT);
+	writel(0, fttmr010->base + TIMER2_MATCH1);
+	writel(0, fttmr010->base + TIMER2_MATCH2);
+
+	if (fttmr010->count_down) {
+		writel(~0, fttmr010->base + TIMER2_LOAD);
+		clocksource_mmio_init(fttmr010->base + TIMER2_COUNT,
+				      "FTTMR010-TIMER2",
+				      fttmr010->tick_rate,
+				      300, 32, clocksource_mmio_readl_down);
+		sched_clock_register(fttmr010_read_sched_clock_down, 32,
+				     fttmr010->tick_rate);
+	} else {
+		writel(0, fttmr010->base + TIMER2_LOAD);
+		clocksource_mmio_init(fttmr010->base + TIMER2_COUNT,
+				      "FTTMR010-TIMER2",
+				      fttmr010->tick_rate,
+				      300, 32, clocksource_mmio_readl_up);
+		sched_clock_register(fttmr010_read_sched_clock_up, 32,
+				     fttmr010->tick_rate);
+	}
 
 	/*
-	 * Setup clockevent timer (interrupt-driven.)
+	 * Setup clockevent timer (interrupt-driven) on timer 1.
 	 */
-	writel(0, base + TIMER1_COUNT);
-	writel(0, base + TIMER1_LOAD);
-	writel(0, base + TIMER1_MATCH1);
-	writel(0, base + TIMER1_MATCH2);
-	setup_irq(irq, &fttmr010_timer_irq);
-	fttmr010_clockevent.cpumask = cpumask_of(0);
-	clockevents_config_and_register(&fttmr010_clockevent, tick_rate,
+	writel(0, fttmr010->base + TIMER1_COUNT);
+	writel(0, fttmr010->base + TIMER1_LOAD);
+	writel(0, fttmr010->base + TIMER1_MATCH1);
+	writel(0, fttmr010->base + TIMER1_MATCH2);
+	ret = request_irq(irq, fttmr010_timer_interrupt, IRQF_TIMER,
+			  "FTTMR010-TIMER1", &fttmr010->clkevt);
+	if (ret) {
+		pr_err("FTTMR010-TIMER1 no IRQ\n");
+		goto out_unmap;
+	}
+
+	fttmr010->clkevt.name = "FTTMR010-TIMER1";
+	/* Reasonably fast and accurate clock event */
+	fttmr010->clkevt.rating = 300;
+	fttmr010->clkevt.features = CLOCK_EVT_FEAT_PERIODIC |
+		CLOCK_EVT_FEAT_ONESHOT;
+	fttmr010->clkevt.set_next_event = fttmr010_timer_set_next_event;
+	fttmr010->clkevt.set_state_shutdown = fttmr010_timer_shutdown;
+	fttmr010->clkevt.set_state_periodic = fttmr010_timer_set_periodic;
+	fttmr010->clkevt.set_state_oneshot = fttmr010_timer_set_oneshot;
+	fttmr010->clkevt.tick_resume = fttmr010_timer_shutdown;
+	fttmr010->clkevt.cpumask = cpumask_of(0);
+	fttmr010->clkevt.irq = irq;
+	clockevents_config_and_register(&fttmr010->clkevt,
+					fttmr010->tick_rate,
 					1, 0xffffffff);
 
-	return 0;
-}
+#ifdef CONFIG_ARM
+	/* Also use this timer for delays */
+	if (fttmr010->count_down)
+		fttmr010->delay_timer.read_current_timer =
+			fttmr010_read_current_timer_down;
+	else
+		fttmr010->delay_timer.read_current_timer =
+			fttmr010_read_current_timer_up;
+	fttmr010->delay_timer.freq = fttmr010->tick_rate;
+	register_current_timer_delay(&fttmr010->delay_timer);
+#endif
 
-static int __init fttmr010_timer_of_init(struct device_node *np)
-{
-	/*
-	 * These implementations require a clock reference.
-	 * FIXME: we currently only support clocking using PCLK
-	 * and using EXTCLK is not supported in the driver.
-	 */
-	struct clk *clk;
+	return 0;
 
-	clk = of_clk_get_by_name(np, "PCLK");
-	if (IS_ERR(clk)) {
-		pr_err("could not get PCLK");
-		return PTR_ERR(clk);
-	}
-	tick_rate = clk_get_rate(clk);
+out_unmap:
+	iounmap(fttmr010->base);
+out_free:
+	kfree(fttmr010);
+out_disable_clock:
+	clk_disable_unprepare(clk);
 
-	return fttmr010_timer_common_init(np);
+	return ret;
 }
-CLOCKSOURCE_OF_DECLARE(fttmr010, "faraday,fttmr010", fttmr010_timer_of_init);
 
-/*
- * Gemini-specific: relevant registers in the global syscon
- */
-#define GLOBAL_STATUS		0x04
-#define CPU_AHB_RATIO_MASK	(0x3 << 18)
-#define CPU_AHB_1_1		(0x0 << 18)
-#define CPU_AHB_3_2		(0x1 << 18)
-#define CPU_AHB_24_13		(0x2 << 18)
-#define CPU_AHB_2_1		(0x3 << 18)
-#define REG_TO_AHB_SPEED(reg)	((((reg) >> 15) & 0x7) * 10 + 130)
-
-static int __init gemini_timer_of_init(struct device_node *np)
+static __init int aspeed_timer_init(struct device_node *np)
 {
-	static struct regmap *map;
-	int ret;
-	u32 val;
-
-	map = syscon_regmap_lookup_by_phandle(np, "syscon");
-	if (IS_ERR(map)) {
-		pr_err("Can't get regmap for syscon handle\n");
-		return -ENODEV;
-	}
-	ret = regmap_read(map, GLOBAL_STATUS, &val);
-	if (ret) {
-		pr_err("Can't read syscon status register\n");
-		return -ENXIO;
-	}
-
-	tick_rate = REG_TO_AHB_SPEED(val) * 1000000;
-	pr_info("Bus: %dMHz ", tick_rate / 1000000);
-
-	tick_rate /= 6;		/* APB bus run AHB*(1/6) */
-
-	switch (val & CPU_AHB_RATIO_MASK) {
-	case CPU_AHB_1_1:
-		pr_cont("(1/1)\n");
-		break;
-	case CPU_AHB_3_2:
-		pr_cont("(3/2)\n");
-		break;
-	case CPU_AHB_24_13:
-		pr_cont("(24/13)\n");
-		break;
-	case CPU_AHB_2_1:
-		pr_cont("(2/1)\n");
-		break;
-	}
+	return fttmr010_common_init(np, true);
+}
 
-	return fttmr010_timer_common_init(np);
+static __init int fttmr010_timer_init(struct device_node *np)
+{
+	return fttmr010_common_init(np, false);
 }
-CLOCKSOURCE_OF_DECLARE(gemini, "cortina,gemini-timer", gemini_timer_of_init);
+
+TIMER_OF_DECLARE(fttmr010, "faraday,fttmr010", fttmr010_timer_init);
+TIMER_OF_DECLARE(gemini, "cortina,gemini-timer", fttmr010_timer_init);
+TIMER_OF_DECLARE(moxart, "moxa,moxart-timer", fttmr010_timer_init);
+TIMER_OF_DECLARE(ast2400, "aspeed,ast2400-timer", aspeed_timer_init);
+TIMER_OF_DECLARE(ast2500, "aspeed,ast2500-timer", aspeed_timer_init);

drivers/clocksource/timer-imx-gpt.c

@@ -545,15 +545,15 @@ static int __init imx6dl_timer_init_dt(struct device_node *np)
 	return mxc_timer_init_dt(np, GPT_TYPE_IMX6DL);
 }
 
-CLOCKSOURCE_OF_DECLARE(imx1_timer, "fsl,imx1-gpt", imx1_timer_init_dt);
-CLOCKSOURCE_OF_DECLARE(imx21_timer, "fsl,imx21-gpt", imx21_timer_init_dt);
-CLOCKSOURCE_OF_DECLARE(imx27_timer, "fsl,imx27-gpt", imx21_timer_init_dt);
-CLOCKSOURCE_OF_DECLARE(imx31_timer, "fsl,imx31-gpt", imx31_timer_init_dt);
-CLOCKSOURCE_OF_DECLARE(imx25_timer, "fsl,imx25-gpt", imx31_timer_init_dt);
-CLOCKSOURCE_OF_DECLARE(imx50_timer, "fsl,imx50-gpt", imx31_timer_init_dt);
-CLOCKSOURCE_OF_DECLARE(imx51_timer, "fsl,imx51-gpt", imx31_timer_init_dt);
-CLOCKSOURCE_OF_DECLARE(imx53_timer, "fsl,imx53-gpt", imx31_timer_init_dt);
-CLOCKSOURCE_OF_DECLARE(imx6q_timer, "fsl,imx6q-gpt", imx31_timer_init_dt);
-CLOCKSOURCE_OF_DECLARE(imx6dl_timer, "fsl,imx6dl-gpt", imx6dl_timer_init_dt);
-CLOCKSOURCE_OF_DECLARE(imx6sl_timer, "fsl,imx6sl-gpt", imx6dl_timer_init_dt);
-CLOCKSOURCE_OF_DECLARE(imx6sx_timer, "fsl,imx6sx-gpt", imx6dl_timer_init_dt);
+TIMER_OF_DECLARE(imx1_timer, "fsl,imx1-gpt", imx1_timer_init_dt);
+TIMER_OF_DECLARE(imx21_timer, "fsl,imx21-gpt", imx21_timer_init_dt);
+TIMER_OF_DECLARE(imx27_timer, "fsl,imx27-gpt", imx21_timer_init_dt);
+TIMER_OF_DECLARE(imx31_timer, "fsl,imx31-gpt", imx31_timer_init_dt);
+TIMER_OF_DECLARE(imx25_timer, "fsl,imx25-gpt", imx31_timer_init_dt);
+TIMER_OF_DECLARE(imx50_timer, "fsl,imx50-gpt", imx31_timer_init_dt);
+TIMER_OF_DECLARE(imx51_timer, "fsl,imx51-gpt", imx31_timer_init_dt);
+TIMER_OF_DECLARE(imx53_timer, "fsl,imx53-gpt", imx31_timer_init_dt);
+TIMER_OF_DECLARE(imx6q_timer, "fsl,imx6q-gpt", imx31_timer_init_dt);
+TIMER_OF_DECLARE(imx6dl_timer, "fsl,imx6dl-gpt", imx6dl_timer_init_dt);
+TIMER_OF_DECLARE(imx6sl_timer, "fsl,imx6sl-gpt", imx6dl_timer_init_dt);
+TIMER_OF_DECLARE(imx6sx_timer, "fsl,imx6sx-gpt", imx6dl_timer_init_dt);

drivers/clocksource/timer-integrator-ap.c

@@ -232,5 +232,5 @@ static int __init integrator_ap_timer_init_of(struct device_node *node)
 	return 0;
 }
 
-CLOCKSOURCE_OF_DECLARE(integrator_ap_timer, "arm,integrator-timer",
+TIMER_OF_DECLARE(integrator_ap_timer, "arm,integrator-timer",
 		       integrator_ap_timer_init_of);

drivers/clocksource/timer-keystone.c

@@ -226,5 +226,5 @@ err:
 	return error;
 }
 
-CLOCKSOURCE_OF_DECLARE(keystone_timer, "ti,keystone-timer",
+TIMER_OF_DECLARE(keystone_timer, "ti,keystone-timer",
 			   keystone_timer_init);

drivers/clocksource/timer-nps.c

@@ -110,9 +110,9 @@ static int __init nps_setup_clocksource(struct device_node *node)
 	return ret;
 }
 
-CLOCKSOURCE_OF_DECLARE(ezchip_nps400_clksrc, "ezchip,nps400-timer",
+TIMER_OF_DECLARE(ezchip_nps400_clksrc, "ezchip,nps400-timer",
 		       nps_setup_clocksource);
-CLOCKSOURCE_OF_DECLARE(ezchip_nps400_clk_src, "ezchip,nps400-timer1",
+TIMER_OF_DECLARE(ezchip_nps400_clk_src, "ezchip,nps400-timer1",
 		       nps_setup_clocksource);
 
 #ifdef CONFIG_EZNPS_MTM_EXT
@@ -279,6 +279,6 @@ static int __init nps_setup_clockevent(struct device_node *node)
 	return 0;
 }
 
-CLOCKSOURCE_OF_DECLARE(ezchip_nps400_clk_evt, "ezchip,nps400-timer0",
+TIMER_OF_DECLARE(ezchip_nps400_clk_evt, "ezchip,nps400-timer0",
 		       nps_setup_clockevent);
 #endif /* CONFIG_EZNPS_MTM_EXT */

drivers/clocksource/timer-of.c

@@ -0,0 +1,172 @@
+/*
+ * Copyright (c) 2017, Linaro Ltd.  All rights reserved.
+ *
+ * Author: Daniel Lezcano <daniel.lezcano@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/slab.h>
+
+#include "timer-of.h"
+
+static __init void timer_irq_exit(struct of_timer_irq *of_irq)
+{
+	struct timer_of *to = container_of(of_irq, struct timer_of, of_irq);
+
+	struct clock_event_device *clkevt = &to->clkevt;
+
+	of_irq->percpu ? free_percpu_irq(of_irq->irq, clkevt) :
+		free_irq(of_irq->irq, clkevt);
+}
+
+static __init int timer_irq_init(struct device_node *np,
+				 struct of_timer_irq *of_irq)
+{
+	int ret;
+	struct timer_of *to = container_of(of_irq, struct timer_of, of_irq);
+	struct clock_event_device *clkevt = &to->clkevt;
+
+	of_irq->irq = of_irq->name ? of_irq_get_byname(np, of_irq->name):
+		irq_of_parse_and_map(np, of_irq->index);
+	if (!of_irq->irq) {
+		pr_err("Failed to map interrupt for %s\n", np->full_name);
+		return -EINVAL;
+	}
+
+	ret = of_irq->percpu ?
+		request_percpu_irq(of_irq->irq, of_irq->handler,
+				   np->full_name, clkevt) :
+		request_irq(of_irq->irq, of_irq->handler,
+			    of_irq->flags ? of_irq->flags : IRQF_TIMER,
+			    np->full_name, clkevt);
+	if (ret) {
+		pr_err("Failed to request irq %d for %s\n", of_irq->irq,
+		       np->full_name);
+		return ret;
+	}
+
+	clkevt->irq = of_irq->irq;
+
+	return 0;
+}
+
+static __init void timer_clk_exit(struct of_timer_clk *of_clk)
+{
+	of_clk->rate = 0;
+	clk_disable_unprepare(of_clk->clk);
+	clk_put(of_clk->clk);
+}
+
+static __init int timer_clk_init(struct device_node *np,
+				 struct of_timer_clk *of_clk)
+{
+	int ret;
+
+	of_clk->clk = of_clk->name ? of_clk_get_by_name(np, of_clk->name) :
+		of_clk_get(np, of_clk->index);
+	if (IS_ERR(of_clk->clk)) {
+		pr_err("Failed to get clock for %s\n", np->full_name);
+		return PTR_ERR(of_clk->clk);
+	}
+
+	ret = clk_prepare_enable(of_clk->clk);
+	if (ret) {
+		pr_err("Failed for enable clock for %s\n", np->full_name);
+		goto out_clk_put;
+	}
+
+	of_clk->rate = clk_get_rate(of_clk->clk);
+	if (!of_clk->rate) {
+		ret = -EINVAL;
+		pr_err("Failed to get clock rate for %s\n", np->full_name);
+		goto out_clk_disable;
+	}
+
+	of_clk->period = DIV_ROUND_UP(of_clk->rate, HZ);
+out:
+	return ret;
+
+out_clk_disable:
+	clk_disable_unprepare(of_clk->clk);
+out_clk_put:
+	clk_put(of_clk->clk);
+
+	goto out;
+}
+
+static __init void timer_base_exit(struct of_timer_base *of_base)
+{
+	iounmap(of_base->base);
+}
+
+static __init int timer_base_init(struct device_node *np,
+				  struct of_timer_base *of_base)
+{
+	const char *name = of_base->name ? of_base->name : np->full_name;
+
+	of_base->base = of_io_request_and_map(np, of_base->index, name);
+	if (of_base->base) {
+		pr_err("Failed to iomap (%s)\n", name);
+		return -ENXIO;
+	}
+
+	return 0;
+}
+
+int __init timer_of_init(struct device_node *np, struct timer_of *to)
+{
+	int ret;
+	int flags = 0;
+
+	if (to->flags & TIMER_OF_BASE) {
+		ret = timer_base_init(np, &to->of_base);
+		if (ret)
+			goto out_fail;
+		flags |= TIMER_OF_BASE;
+	}
+
+	if (to->flags & TIMER_OF_CLOCK) {
+		ret = timer_clk_init(np, &to->of_clk);
+		if (ret)
+			goto out_fail;
+		flags |= TIMER_OF_CLOCK;
+	}
+
+	if (to->flags & TIMER_OF_IRQ) {
+		ret = timer_irq_init(np, &to->of_irq);
+		if (ret)
+			goto out_fail;
+		flags |= TIMER_OF_IRQ;
+	}
+
+	if (!to->clkevt.name)
+		to->clkevt.name = np->name;
+out:
+	return ret;
+
+out_fail:
+	if (flags & TIMER_OF_IRQ)
+		timer_irq_exit(&to->of_irq);
+
+	if (flags & TIMER_OF_CLOCK)
+		timer_clk_exit(&to->of_clk);
+
+	if (flags & TIMER_OF_BASE)
+		timer_base_exit(&to->of_base);
+	goto out;
+}

drivers/clocksource/timer-of.h

@@ -0,0 +1,69 @@
+#ifndef __TIMER_OF_H__
+#define __TIMER_OF_H__
+
+#include <linux/clockchips.h>
+
+#define TIMER_OF_BASE	0x1
+#define TIMER_OF_CLOCK	0x2
+#define TIMER_OF_IRQ	0x4
+
+struct of_timer_irq {
+	int irq;
+	int index;
+	int percpu;
+	const char *name;
+	unsigned long flags;
+	irq_handler_t handler;
+};
+
+struct of_timer_base {
+	void __iomem *base;
+	const char *name;
+	int index;
+};
+
+struct of_timer_clk {
+	struct clk *clk;
+	const char *name;
+	int index;
+	unsigned long rate;
+	unsigned long period;
+};
+
+struct timer_of {
+	unsigned int flags;
+	struct clock_event_device clkevt;
+	struct of_timer_base of_base;
+	struct of_timer_irq  of_irq;
+	struct of_timer_clk  of_clk;
+	void *private_data;
+};
+
+static inline struct timer_of *to_timer_of(struct clock_event_device *clkevt)
+{
+	return container_of(clkevt, struct timer_of, clkevt);
+}
+
+static inline void __iomem *timer_of_base(struct timer_of *to)
+{
+	return to->of_base.base;
+}
+
+static inline int timer_of_irq(struct timer_of *to)
+{
+	return to->of_irq.irq;
+}
+
+static inline unsigned long timer_of_rate(struct timer_of *to)
+{
+	return to->of_clk.rate;
+}
+
+static inline unsigned long timer_of_period(struct timer_of *to)
+{
+	return to->of_clk.period;
+}
+
+extern int __init timer_of_init(struct device_node *np,
+				struct timer_of *to);
+#endif

drivers/clocksource/timer-oxnas-rps.c

@@ -293,7 +293,7 @@ err_alloc:
 	return ret;
 }
 
-CLOCKSOURCE_OF_DECLARE(ox810se_rps,
+TIMER_OF_DECLARE(ox810se_rps,
 		       "oxsemi,ox810se-rps-timer", oxnas_rps_timer_init);
-CLOCKSOURCE_OF_DECLARE(ox820_rps,
+TIMER_OF_DECLARE(ox820_rps,
 		       "oxsemi,ox820se-rps-timer", oxnas_rps_timer_init);

drivers/clocksource/timer-prima2.c

@@ -245,5 +245,5 @@ static int __init sirfsoc_prima2_timer_init(struct device_node *np)
 
 	return 0;
 }
-CLOCKSOURCE_OF_DECLARE(sirfsoc_prima2_timer,
+TIMER_OF_DECLARE(sirfsoc_prima2_timer,
 	"sirf,prima2-tick", sirfsoc_prima2_timer_init);

drivers/clocksource/clksrc-probe.c → drivers/clocksource/timer-probe.c

@@ -19,20 +19,20 @@
 #include <linux/of.h>
 #include <linux/clocksource.h>
 
-extern struct of_device_id __clksrc_of_table[];
+extern struct of_device_id __timer_of_table[];
 
-static const struct of_device_id __clksrc_of_table_sentinel
-	__used __section(__clksrc_of_table_end);
+static const struct of_device_id __timer_of_table_sentinel
+	__used __section(__timer_of_table_end);
 
-void __init clocksource_probe(void)
+void __init timer_probe(void)
 {
 	struct device_node *np;
 	const struct of_device_id *match;
 	of_init_fn_1_ret init_func_ret;
-	unsigned clocksources = 0;
+	unsigned timers = 0;
 	int ret;
 
-	for_each_matching_node_and_match(np, __clksrc_of_table, &match) {
+	for_each_matching_node_and_match(np, __timer_of_table, &match) {
 		if (!of_device_is_available(np))
 			continue;
 
@@ -45,11 +45,11 @@ void __init clocksource_probe(void)
 			continue;
 		}
 
-		clocksources++;
+		timers++;
 	}
 
-	clocksources += acpi_probe_device_table(clksrc);
+	timers += acpi_probe_device_table(timer);
 
-	if (!clocksources)
-		pr_crit("%s: no matching clocksources found\n", __func__);
+	if (!timers)
+		pr_crit("%s: no matching timers found\n", __func__);
 }

drivers/clocksource/timer-sp804.c

@@ -287,7 +287,7 @@ err:
 	iounmap(base);
 	return ret;
 }
-CLOCKSOURCE_OF_DECLARE(sp804, "arm,sp804", sp804_of_init);
+TIMER_OF_DECLARE(sp804, "arm,sp804", sp804_of_init);
 
 static int __init integrator_cp_of_init(struct device_node *np)
 {
@@ -335,4 +335,4 @@ err:
 	iounmap(base);
 	return ret;
 }
-CLOCKSOURCE_OF_DECLARE(intcp, "arm,integrator-cp-timer", integrator_cp_of_init);
+TIMER_OF_DECLARE(intcp, "arm,integrator-cp-timer", integrator_cp_of_init);