ASoC: fsl_sai: Move the global registers setting to _dai_probe()

Because we cannot make sure which one of _dai_fmt() and _dai_sysclk()
will be firstly called. So move the RCSR/TCSR and TCR1/RCR1's
initialization to _dai_probe(), and this can make sure that before any
of {T,R}CR{1~5} register to be set the RCSR/TCSR's RE/TE bit has been
cleared for the hareware limitation.

Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

sound/soc/fsl/fsl_sai.c

@@ -100,11 +100,6 @@ static int fsl_sai_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
 	if (ret)
 		return ret;
 
-	sai_writel(sai, 0x0, sai->base + FSL_SAI_RCSR);
-	sai_writel(sai, 0x0, sai->base + FSL_SAI_TCSR);
-	sai_writel(sai, FSL_SAI_MAXBURST_TX * 2, sai->base + FSL_SAI_TCR1);
-	sai_writel(sai, FSL_SAI_MAXBURST_RX - 1, sai->base + FSL_SAI_RCR1);
-
 	ret = fsl_sai_set_dai_sysclk_tr(cpu_dai, clk_id, freq,
 					FSL_FMT_TRANSMITTER);
 	if (ret) {
@@ -351,6 +346,18 @@ static const struct snd_soc_dai_ops fsl_sai_pcm_dai_ops = {
 static int fsl_sai_dai_probe(struct snd_soc_dai *cpu_dai)
 {
 	struct fsl_sai *sai = dev_get_drvdata(cpu_dai->dev);
+	int ret;
+
+	ret = clk_prepare_enable(sai->clk);
+	if (ret)
+		return ret;
+
+	sai_writel(sai, 0x0, sai->base + FSL_SAI_RCSR);
+	sai_writel(sai, 0x0, sai->base + FSL_SAI_TCSR);
+	sai_writel(sai, FSL_SAI_MAXBURST_TX * 2, sai->base + FSL_SAI_TCR1);
+	sai_writel(sai, FSL_SAI_MAXBURST_RX - 1, sai->base + FSL_SAI_RCR1);
+
+	clk_disable_unprepare(sai->clk);
 
 	snd_soc_dai_init_dma_data(cpu_dai, &sai->dma_params_tx,
 				&sai->dma_params_rx);