Merge tag 'usb-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull usb/phy/extcon updates from Greg KH:
 "Here is the big USB, and PHY, and extcon, patchsets for 4.9-rc1.

  Full details are in the shortlog, but generally a lot of new hardware
  support, usb gadget updates, and Wolfram's great cleanup of USB error
  message handling, making the kernel image a tad bit smaller.

  All of this has been in linux-next with no reported issues"

* tag 'usb-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (343 commits)
  Revert "usbtmc: convert to devm_kzalloc"
  USB: serial: cp210x: Add ID for a Juniper console
  usb: Kconfig: using select for USB_COMMON dependency
  bluetooth: bcm203x: don't print error when allocating urb fails
  mmc: host: vub300: don't print error when allocating urb fails
  usb: hub: change CLEAR_FEATURE to SET_FEATURE
  usb: core: Introduce a USB port LED trigger
  USB: bcma: drop Northstar PHY 2.0 initialization code
  usb: core: hcd: add missing header dependencies
  usb: musb: da8xx: fix error handling message in probe
  usb: musb: Fix session based PM for first invalid VBUS
  usb: musb: Fix PM runtime for disconnect after unconfigure
  musb: Export musb_root_disconnect for use in modules
  usb: misc: legousbtower: Fix NULL pointer deference
  cdc-acm: hardening against malicious devices
  Revert "usb: gadget: NCM: Protect dev->port_usb using dev->lock"
  include: extcon: Fix compilation error caused because of incomplete merge
  MAINTAINERS: add tree entry for USB Serial
  phy-twl4030-usb: initialize charging-related stuff via pm_runtime
  phy-twl4030-usb: better handle musb_mailbox() failure
  ...

Documentation/ABI/testing/sysfs-class-led-trigger-usbport

@@ -0,0 +1,12 @@
+What:		/sys/class/leds/<led>/ports/<port>
+Date:		September 2016
+KernelVersion:	4.9
+Contact:	linux-leds@vger.kernel.org
+		linux-usb@vger.kernel.org
+Description:
+		Every dir entry represents a single USB port that can be
+		selected for the USB port trigger. Selecting ports makes trigger
+		observing them for any connected devices and lighting on LED if
+		there are any.
+		Echoing "1" value selects USB port. Echoing "0" unselects it.
+		Current state can be also read.

Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.txt

@@ -0,0 +1,41 @@
+Qualcomm's PM8941 USB ID Extcon device
+
+Some Qualcomm PMICs have a "misc" module that can be used to detect when
+the USB ID pin has been pulled low or high.
+
+PROPERTIES
+
+- compatible:
+    Usage: required
+    Value type: <string>
+    Definition: Should contain "qcom,pm8941-misc";
+
+- reg:
+    Usage: required
+    Value type: <u32>
+    Definition: Should contain the offset to the misc address space
+
+- interrupts:
+    Usage: required
+    Value type: <prop-encoded-array>
+    Definition: Should contain the usb id interrupt
+
+- interrupt-names:
+    Usage: required
+    Value type: <stringlist>
+    Definition: Should contain the string "usb_id" for the usb id interrupt
+
+Example:
+
+	pmic {
+		usb_id: misc@900 {
+			compatible = "qcom,pm8941-misc";
+			reg = <0x900>;
+			interrupts = <0x0 0x9 0 IRQ_TYPE_EDGE_BOTH>;
+			interrupt-names = "usb_id";
+		};
+	}
+
+	usb-controller {
+		extcon = <&usb_id>;
+	};

Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt

@@ -0,0 +1,23 @@
+Driver for Broadcom Northstar USB 3.0 PHY
+
+Required properties:
+
+- compatible: one of: "brcm,ns-ax-usb3-phy", "brcm,ns-bx-usb3-phy".
+- reg: register mappings for DMP (Device Management Plugin) and ChipCommon B
+       MMI.
+- reg-names: "dmp" and "ccb-mii"
+
+Initialization of USB 3.0 PHY depends on Northstar version. There are currently
+three known series: Ax, Bx and Cx.
+Known A0: BCM4707 rev 0
+Known B0: BCM4707 rev 4, BCM53573 rev 2
+Known B1: BCM4707 rev 6
+Known C0: BCM47094 rev 0
+
+Example:
+	usb3-phy {
+		compatible = "brcm,ns-ax-usb3-phy";
+		reg = <0x18105000 0x1000>, <0x18003000 0x1000>;
+		reg-names = "dmp", "ccb-mii";
+		#phy-cells = <0>;
+	};

Documentation/devicetree/bindings/phy/mxs-usb-phy.txt

@@ -12,6 +12,16 @@ Required properties:
 - interrupts: Should contain phy interrupt
 - fsl,anatop: phandle for anatop register, it is only for imx6 SoC series
 
+Optional properties:
+- fsl,tx-cal-45-dn-ohms: Integer [30-55]. Resistance (in ohms) of switchable
+  high-speed trimming resistor connected in parallel with the 45 ohm resistor
+  that terminates the DN output signal. Default: 45
+- fsl,tx-cal-45-dp-ohms: Integer [30-55]. Resistance (in ohms) of switchable
+  high-speed trimming resistor connected in parallel with the 45 ohm resistor
+  that terminates the DP output signal. Default: 45
+- fsl,tx-d-cal: Integer [79-119]. Current trimming value (as a percentage) of
+  the 17.78mA TX reference current. Default: 100
+
 Example:
 usbphy1: usbphy@020c9000 {
 	compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";

Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt

@@ -0,0 +1,64 @@
+ROCKCHIP USB2.0 PHY WITH INNO IP BLOCK
+
+Required properties (phy (parent) node):
+ - compatible : should be one of the listed compatibles:
+	* "rockchip,rk3366-usb2phy"
+	* "rockchip,rk3399-usb2phy"
+ - reg : the address offset of grf for usb-phy configuration.
+ - #clock-cells : should be 0.
+ - clock-output-names : specify the 480m output clock name.
+
+Optional properties:
+ - clocks : phandle + phy specifier pair, for the input clock of phy.
+ - clock-names : input clock name of phy, must be "phyclk".
+
+Required nodes : a sub-node is required for each port the phy provides.
+		 The sub-node name is used to identify host or otg port,
+		 and shall be the following entries:
+	* "otg-port" : the name of otg port.
+	* "host-port" : the name of host port.
+
+Required properties (port (child) node):
+ - #phy-cells : must be 0. See ./phy-bindings.txt for details.
+ - interrupts : specify an interrupt for each entry in interrupt-names.
+ - interrupt-names : a list which shall be the following entries:
+	* "otg-id" : for the otg id interrupt.
+	* "otg-bvalid" : for the otg vbus interrupt.
+	* "linestate" : for the host/otg linestate interrupt.
+
+Optional properties:
+ - phy-supply : phandle to a regulator that provides power to VBUS.
+		See ./phy-bindings.txt for details.
+
+Example:
+
+grf: syscon@ff770000 {
+	compatible = "rockchip,rk3366-grf", "syscon", "simple-mfd";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+...
+
+	u2phy: usb2-phy@700 {
+		compatible = "rockchip,rk3366-usb2phy";
+		reg = <0x700 0x2c>;
+		#clock-cells = <0>;
+		clock-output-names = "sclk_otgphy0_480m";
+
+		u2phy_otg: otg-port {
+			#phy-cells = <0>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "otg-id", "otg-bvalid", "linestate";
+			status = "okay";
+		};
+
+		u2phy_host: host-port {
+			#phy-cells = <0>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "linestate";
+			status = "okay";
+		};
+	};
+};

Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt

@@ -0,0 +1,101 @@
+* ROCKCHIP type-c PHY
+---------------------
+
+Required properties:
+ - compatible : must be "rockchip,rk3399-typec-phy"
+ - reg: Address and length of the usb phy control register set
+ - rockchip,grf : phandle to the syscon managing the "general
+   register files"
+ - clocks : phandle + clock specifier for the phy clocks
+ - clock-names : string, clock name, must be "tcpdcore", "tcpdphy-ref";
+ - assigned-clocks: main clock, should be <&cru SCLK_UPHY0_TCPDCORE> or
+		    <&cru SCLK_UPHY1_TCPDCORE>;
+ - assigned-clock-rates : the phy core clk frequency, shall be: 50000000
+ - resets : a list of phandle + reset specifier pairs
+ - reset-names : string reset name, must be:
+		 "uphy", "uphy-pipe", "uphy-tcphy"
+ - extcon : extcon specifier for the Power Delivery
+
+Note, there are 2 type-c phys for RK3399, and they are almost identical, except
+these registers(description below), every register node contains 3 sections:
+offset, enable bit, write mask bit.
+ - rockchip,typec-conn-dir : the register of type-c connector direction,
+   for type-c phy0, it must be <0xe580 0 16>;
+   for type-c phy1, it must be <0xe58c 0 16>;
+ - rockchip,usb3tousb2-en : the register of type-c force usb3 to usb2 enable
+   control.
+   for type-c phy0, it must be <0xe580 3 19>;
+   for type-c phy1, it must be <0xe58c 3 19>;
+ - rockchip,external-psm : the register of type-c phy external psm clock
+   selection.
+   for type-c phy0, it must be <0xe588 14 30>;
+   for type-c phy1, it must be <0xe594 14 30>;
+ - rockchip,pipe-status : the register of type-c phy pipe status.
+   for type-c phy0, it must be <0xe5c0 0 0>;
+   for type-c phy1, it must be <0xe5c0 16 16>;
+
+Required nodes : a sub-node is required for each port the phy provides.
+		 The sub-node name is used to identify dp or usb3 port,
+		 and shall be the following entries:
+	* "dp-port" : the name of DP port.
+	* "usb3-port" : the name of USB3 port.
+
+Required properties (port (child) node):
+- #phy-cells : must be 0, See ./phy-bindings.txt for details.
+
+Example:
+	tcphy0: phy@ff7c0000 {
+		compatible = "rockchip,rk3399-typec-phy";
+		reg = <0x0 0xff7c0000 0x0 0x40000>;
+		rockchip,grf = <&grf>;
+		extcon = <&fusb0>;
+		clocks = <&cru SCLK_UPHY0_TCPDCORE>,
+			 <&cru SCLK_UPHY0_TCPDPHY_REF>;
+		clock-names = "tcpdcore", "tcpdphy-ref";
+		assigned-clocks = <&cru SCLK_UPHY0_TCPDCORE>;
+		assigned-clock-rates = <50000000>;
+		resets = <&cru SRST_UPHY0>,
+			 <&cru SRST_UPHY0_PIPE_L00>,
+			 <&cru SRST_P_UPHY0_TCPHY>;
+		reset-names = "uphy", "uphy-pipe", "uphy-tcphy";
+		rockchip,typec-conn-dir = <0xe580 0 16>;
+		rockchip,usb3tousb2-en = <0xe580 3 19>;
+		rockchip,external-psm = <0xe588 14 30>;
+		rockchip,pipe-status = <0xe5c0 0 0>;
+
+		tcphy0_dp: dp-port {
+			#phy-cells = <0>;
+		};
+
+		tcphy0_usb3: usb3-port {
+			#phy-cells = <0>;
+		};
+	};
+
+	tcphy1: phy@ff800000 {
+		compatible = "rockchip,rk3399-typec-phy";
+		reg = <0x0 0xff800000 0x0 0x40000>;
+		rockchip,grf = <&grf>;
+		extcon = <&fusb1>;
+		clocks = <&cru SCLK_UPHY1_TCPDCORE>,
+			 <&cru SCLK_UPHY1_TCPDPHY_REF>;
+		clock-names = "tcpdcore", "tcpdphy-ref";
+		assigned-clocks = <&cru SCLK_UPHY1_TCPDCORE>;
+		assigned-clock-rates = <50000000>;
+		resets = <&cru SRST_UPHY1>,
+			 <&cru SRST_UPHY1_PIPE_L00>,
+			 <&cru SRST_P_UPHY1_TCPHY>;
+		reset-names = "uphy", "uphy-pipe", "uphy-tcphy";
+		rockchip,typec-conn-dir = <0xe58c 0 16>;
+		rockchip,usb3tousb2-en = <0xe58c 3 19>;
+		rockchip,external-psm = <0xe594 14 30>;
+		rockchip,pipe-status = <0xe5c0 16 16>;
+
+		tcphy1_dp: dp-port {
+			#phy-cells = <0>;
+		};
+
+		tcphy1_usb3: usb3-port {
+			#phy-cells = <0>;
+		};
+	};

Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt

@@ -5,6 +5,8 @@ This file provides information on what the device node for the R-Car generation
 
 Required properties:
 - compatible: "renesas,usb2-phy-r8a7795" if the device is a part of an R8A7795
+	      SoC.
+	      "renesas,usb2-phy-r8a7796" if the device is a part of an R8A7796
 	      SoC.
 	      "renesas,rcar-gen3-usb2-phy" for a generic R-Car Gen3 compatible device.
 
@@ -30,11 +32,11 @@ Example (R-Car H3):
 		compatible = "renesas,usb2-phy-r8a7795", "renesas,rcar-gen3-usb2-phy";
 		reg = <0 0xee080200 0 0x700>;
 		interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7795_CLK_EHCI0>;
+		clocks = <&cpg CPG_MOD 703>;
 	};
 
 	usb-phy@ee0a0200 {
 		compatible = "renesas,usb2-phy-r8a7795", "renesas,rcar-gen3-usb2-phy";
 		reg = <0 0xee0a0200 0 0x700>;
-		clocks = <&mstp7_clks R8A7795_CLK_EHCI0>;
+		clocks = <&cpg CPG_MOD 702>;
 	};

Documentation/devicetree/bindings/phy/rockchip-pcie-phy.txt

@@ -0,0 +1,31 @@
+Rockchip PCIE PHY
+-----------------------
+
+Required properties:
+ - compatible: rockchip,rk3399-pcie-phy
+ - #phy-cells: must be 0
+ - clocks: Must contain an entry in clock-names.
+	See ../clocks/clock-bindings.txt for details.
+ - clock-names: Must be "refclk"
+ - resets: Must contain an entry in reset-names.
+	See ../reset/reset.txt for details.
+ - reset-names: Must be "phy"
+
+Example:
+
+grf: syscon@ff770000 {
+	compatible = "rockchip,rk3399-grf", "syscon", "simple-mfd";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	...
+
+	pcie_phy: pcie-phy {
+		compatible = "rockchip,rk3399-pcie-phy";
+		#phy-cells = <0>;
+		clocks = <&cru SCLK_PCIEPHY_REF>;
+		clock-names = "refclk";
+		resets = <&cru SRST_PCIEPHY>;
+		reset-names = "phy";
+	};
+};

Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt

@@ -27,6 +27,9 @@ Optional Properties:
 - clocks : phandle + clock specifier for the phy clocks
 - clock-names: string, clock name, must be "phyclk"
 - #clock-cells: for users of the phy-pll, should be 0
+- reset-names: Only allow the following entries:
+ - phy-reset
+- resets: Must contain an entry for each entry in reset-names.
 
 Example:
 

Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt

@@ -10,6 +10,7 @@ Required properties:
   * allwinner,sun8i-a23-usb-phy
   * allwinner,sun8i-a33-usb-phy
   * allwinner,sun8i-h3-usb-phy
+  * allwinner,sun50i-a64-usb-phy
 - reg : a list of offset + length pairs
 - reg-names :
   * "phy_ctrl"

Documentation/devicetree/bindings/phy/ti-phy.txt

@@ -31,6 +31,8 @@ OMAP USB2 PHY
 
 Required properties:
  - compatible: Should be "ti,omap-usb2"
+	       Should be "ti,dra7x-usb2" for the 1st instance of USB2 PHY on
+	       DRA7x
 	       Should be "ti,dra7x-usb2-phy2" for the 2nd instance of USB2 PHY
 	       in DRA7x
  - reg : Address and length of the register set for the device.

Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt

@@ -81,6 +81,8 @@ i.mx specific properties
 - fsl,usbmisc: phandler of non-core register device, with one
   argument that indicate usb controller index
 - disable-over-current: disable over current detect
+- over-current-active-high: over current signal polarity is high active,
+  typically over current signal polarity is low active.
 - external-vbus-divider: enables off-chip resistor divider for Vbus
 
 Example:

Documentation/devicetree/bindings/usb/dwc2.txt

@@ -26,7 +26,10 @@ Refer to phy/phy-bindings.txt for generic phy consumer properties
 - g-use-dma: enable dma usage in gadget driver.
 - g-rx-fifo-size: size of rx fifo size in gadget mode.
 - g-np-tx-fifo-size: size of non-periodic tx fifo size in gadget mode.
-- g-tx-fifo-size: size of periodic tx fifo per endpoint (except ep0) in gadget mode.
+
+Deprecated properties:
+- g-tx-fifo-size: size of periodic tx fifo per endpoint (except ep0)
+  in gadget mode.
 
 Example:
 

Documentation/devicetree/bindings/usb/dwc3-cavium.txt

@@ -0,0 +1,28 @@
+Cavium SuperSpeed DWC3 USB SoC controller
+
+Required properties:
+- compatible:	Should contain "cavium,octeon-7130-usb-uctl"
+
+Required child node:
+A child node must exist to represent the core DWC3 IP block. The name of
+the node is not important. The content of the node is defined in dwc3.txt.
+
+Example device node:
+
+		    uctl@1180069000000 {
+			    compatible = "cavium,octeon-7130-usb-uctl";
+			    reg = <0x00011800 0x69000000 0x00000000 0x00000100>;
+			    ranges;
+			    #address-cells = <0x00000002>;
+			    #size-cells = <0x00000002>;
+			    refclk-frequency = <0x05f5e100>;
+			    refclk-type-ss = "dlmc_ref_clk0";
+			    refclk-type-hs = "dlmc_ref_clk0";
+			    power = <0x00000002 0x00000002 0x00000001>;
+			    xhci@1690000000000 {
+				    compatible = "cavium,octeon-7130-xhci", "synopsys,dwc3";
+				    reg = <0x00016900 0x00000000 0x00000010 0x00000000>;
+				    interrupt-parent = <0x00000010>;
+				    interrupts = <0x00000009 0x00000004>;
+			    };
+		    };

Documentation/devicetree/bindings/usb/dwc3.txt

@@ -13,7 +13,8 @@ Optional properties:
    in the array is expected to be a handle to the USB2/HS PHY and
    the second element is expected to be a handle to the USB3/SS PHY
  - phys: from the *Generic PHY* bindings
- - phy-names: from the *Generic PHY* bindings
+ - phy-names: from the *Generic PHY* bindings; supported names are "usb2-phy"
+	or "usb3-phy".
  - snps,usb3_lpm_capable: determines if platform is USB3 LPM capable
  - snps,disable_scramble_quirk: true when SW should disable data scrambling.
 	Only really useful for FPGA builds.
@@ -39,6 +40,11 @@ Optional properties:
 			disabling the suspend signal to the PHY.
  - snps,dis_rxdet_inp3_quirk: when set core will disable receiver detection
 			in PHY P3 power state.
+ - snps,dis-u2-freeclk-exists-quirk: when set, clear the u2_freeclk_exists
+			in GUSB2PHYCFG, specify that USB2 PHY doesn't provide
+			a free-running PHY clock.
+ - snps,dis-del-phy-power-chg-quirk: when set core will change PHY power
+			from P0 to P1/P2/P3 without delay.
  - snps,is-utmi-l1-suspend: true when DWC3 asserts output signal
 			utmi_l1_suspend_n, false when asserts utmi_sleep_n
  - snps,hird-threshold: HIRD threshold

Documentation/devicetree/bindings/usb/generic.txt

@@ -11,6 +11,11 @@ Optional properties:
 			"peripheral" and "otg". In case this attribute isn't
 			passed via DT, USB DRD controllers should default to
 			OTG.
+ - phy_type: tells USB controllers that we want to configure the core to support
+			a UTMI+ PHY with an 8- or 16-bit interface if UTMI+ is
+			selected. Valid arguments are "utmi" and "utmi_wide".
+			In case this isn't passed via DT, USB controllers should
+			default to HW capability.
  - otg-rev: tells usb driver the release number of the OTG and EH supplement
 			with which the device and its descriptors are compliant,
 			in binary-coded decimal (i.e. 2.0 is 0200H). This
@@ -34,6 +39,7 @@ dwc3@4a030000 {
 	usb-phy = <&usb2_phy>, <&usb3,phy>;
 	maximum-speed = "super-speed";
 	dr_mode = "otg";
+	phy_type = "utmi_wide";
 	otg-rev = <0x0200>;
 	adp-disable;
 };

Documentation/devicetree/bindings/usb/renesas_usbhs.txt

@@ -9,6 +9,7 @@ Required properties:
 	- "renesas,usbhs-r8a7793" for r8a7793 (R-Car M2-N) compatible device
 	- "renesas,usbhs-r8a7794" for r8a7794 (R-Car E2) compatible device
 	- "renesas,usbhs-r8a7795" for r8a7795 (R-Car H3) compatible device
+	- "renesas,usbhs-r8a7796" for r8a7796 (R-Car M3-W) compatible device
 	- "renesas,rcar-gen2-usbhs" for R-Car Gen2 compatible device
 	- "renesas,rcar-gen3-usbhs" for R-Car Gen3 compatible device
 

Documentation/devicetree/bindings/usb/rockchip,dwc3.txt

@@ -0,0 +1,59 @@
+Rockchip SuperSpeed DWC3 USB SoC controller
+
+Required properties:
+- compatible:	should contain "rockchip,rk3399-dwc3" for rk3399 SoC
+- clocks:	A list of phandle + clock-specifier pairs for the
+		clocks listed in clock-names
+- clock-names:	Should contain the following:
+  "ref_clk"	Controller reference clk, have to be 24 MHz
+  "suspend_clk"	Controller suspend clk, have to be 24 MHz or 32 KHz
+  "bus_clk"	Master/Core clock, have to be >= 62.5 MHz for SS
+		operation and >= 30MHz for HS operation
+  "grf_clk"	Controller grf clk
+
+Required child node:
+A child node must exist to represent the core DWC3 IP block. The name of
+the node is not important. The content of the node is defined in dwc3.txt.
+
+Phy documentation is provided in the following places:
+Documentation/devicetree/bindings/phy/rockchip,dwc3-usb-phy.txt
+
+Example device nodes:
+
+	usbdrd3_0: usb@fe800000 {
+		compatible = "rockchip,rk3399-dwc3";
+		clocks = <&cru SCLK_USB3OTG0_REF>, <&cru SCLK_USB3OTG0_SUSPEND>,
+			 <&cru ACLK_USB3OTG0>, <&cru ACLK_USB3_GRF>;
+		clock-names = "ref_clk", "suspend_clk",
+			      "bus_clk", "grf_clk";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		status = "disabled";
+		usbdrd_dwc3_0: dwc3@fe800000 {
+			compatible = "snps,dwc3";
+			reg = <0x0 0xfe800000 0x0 0x100000>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+			dr_mode = "otg";
+			status = "disabled";
+		};
+	};
+
+	usbdrd3_1: usb@fe900000 {
+		compatible = "rockchip,rk3399-dwc3";
+		clocks = <&cru SCLK_USB3OTG1_REF>, <&cru SCLK_USB3OTG1_SUSPEND>,
+			 <&cru ACLK_USB3OTG1>, <&cru ACLK_USB3_GRF>;
+		clock-names = "ref_clk", "suspend_clk",
+			      "bus_clk", "grf_clk";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		status = "disabled";
+		usbdrd_dwc3_1: dwc3@fe900000 {
+			compatible = "snps,dwc3";
+			reg = <0x0 0xfe900000 0x0 0x100000>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			dr_mode = "otg";
+			status = "disabled";
+		};
+	};

Documentation/devicetree/bindings/usb/usb4604.txt

@@ -0,0 +1,19 @@
+SMSC USB4604 High-Speed Hub Controller
+
+Required properties:
+- compatible: Should be "smsc,usb4604"
+
+Optional properties:
+- reg: Specifies the i2c slave address, it is required and should be 0x2d
+       if I2C is used.
+- reset-gpios: Should specify GPIO for reset.
+- initial-mode: Should specify initial mode.
+                (1 for HUB mode, 2 for STANDBY mode)
+
+Examples:
+	usb-hub@2d {
+		compatible = "smsc,usb4604";
+		reg = <0x2d>;
+		reset-gpios = <&gpx3 5 1>;
+		initial-mode = <1>;
+	};

Documentation/devicetree/bindings/usb/usbmisc-imx.txt

@@ -6,6 +6,7 @@ Required properties:
 	"fsl,imx6q-usbmisc" for imx6q
 	"fsl,vf610-usbmisc" for Vybrid vf610
 	"fsl,imx6sx-usbmisc" for imx6sx
+	"fsl,imx7d-usbmisc" for imx7d
 - reg: Should contain registers location and length
 
 Examples:

Documentation/kernel-parameters.txt

@@ -4248,6 +4248,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 				u = IGNORE_UAS (don't bind to the uas driver);
 				w = NO_WP_DETECT (don't test whether the
 					medium is write-protected).
+				y = ALWAYS_SYNC (issue a SYNCHRONIZE_CACHE
+					even if the device claims no cache)
 			Example: quirks=0419:aaf5:rl,0421:0433:rc
 
 	user_debug=	[KNL,ARM]

Documentation/leds/ledtrig-usbport.txt

@@ -0,0 +1,41 @@
+USB port LED trigger
+====================
+
+This LED trigger can be used for signalling to the user a presence of USB device
+in a given port. It simply turns on LED when device appears and turns it off
+when it disappears.
+
+It requires selecting USB ports that should be observed. All available ones are
+listed as separated entries in a "ports" subdirectory. Selecting is handled by
+echoing "1" to a chosen port.
+
+Please note that this trigger allows selecting multiple USB ports for a single
+LED. This can be useful in two cases:
+
+1) Device with single USB LED and few physical ports
+
+In such a case LED will be turned on as long as there is at least one connected
+USB device.
+
+2) Device with a physical port handled by few controllers
+
+Some devices may have one controller per PHY standard. E.g. USB 3.0 physical
+port may be handled by ohci-platform, ehci-platform and xhci-hcd. If there is
+only one LED user will most likely want to assign ports from all 3 hubs.
+
+
+This trigger can be activated from user space on led class devices as shown
+below:
+
+  echo usbport > trigger
+
+This adds sysfs attributes to the LED that are documented in:
+Documentation/ABI/testing/sysfs-class-led-trigger-usbport
+
+Example use-case:
+
+  echo usbport > trigger
+  echo 1 > ports/usb1-port1
+  echo 1 > ports/usb2-port1
+  cat ports/usb1-port1
+  echo 0 > ports/usb1-port1

MAINTAINERS

@@ -12216,7 +12216,7 @@ S:	Maintained
 F:	drivers/net/usb/lan78xx.*
 
 USB MASS STORAGE DRIVER
-M:	Matthew Dharm <mdharm-usb@one-eyed-alien.net>
+M:	Alan Stern <stern@rowland.harvard.edu>
 L:	linux-usb@vger.kernel.org
 L:	usb-storage@lists.one-eyed-alien.net
 S:	Maintained
@@ -12300,6 +12300,7 @@ F:	drivers/net/usb/rtl8150.c
 USB SERIAL SUBSYSTEM
 M:	Johan Hovold <johan@kernel.org>
 L:	linux-usb@vger.kernel.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial.git
 S:	Maintained
 F:	Documentation/usb/usb-serial.txt
 F:	drivers/usb/serial/

drivers/bluetooth/bcm203x.c

@@ -185,10 +185,8 @@ static int bcm203x_probe(struct usb_interface *intf, const struct usb_device_id
 	data->state = BCM203X_LOAD_MINIDRV;
 
 	data->urb = usb_alloc_urb(0, GFP_KERNEL);
-	if (!data->urb) {
-		BT_ERR("Can't allocate URB");
+	if (!data->urb)
 		return -ENOMEM;
-	}
 
 	if (request_firmware(&firmware, "BCM2033-MD.hex", &udev->dev) < 0) {
 		BT_ERR("Mini driver request failed");

drivers/extcon/Kconfig

@@ -96,6 +96,12 @@ config EXTCON_PALMAS
 	  Say Y here to enable support for USB peripheral and USB host
 	  detection by palmas usb.
 
+config EXTCON_QCOM_SPMI_MISC
+	tristate "Qualcomm USB extcon support"
+	help
+	  Say Y here to enable SPMI PMIC based USB cable detection
+	  support on Qualcomm PMICs such as PM8941.
+
 config EXTCON_RT8973A
 	tristate "Richtek RT8973A EXTCON support"
 	depends on I2C

drivers/extcon/Makefile

@@ -14,6 +14,7 @@ obj-$(CONFIG_EXTCON_MAX77693)	+= extcon-max77693.o
 obj-$(CONFIG_EXTCON_MAX77843)	+= extcon-max77843.o
 obj-$(CONFIG_EXTCON_MAX8997)	+= extcon-max8997.o
 obj-$(CONFIG_EXTCON_PALMAS)	+= extcon-palmas.o
+obj-$(CONFIG_EXTCON_QCOM_SPMI_MISC) += extcon-qcom-spmi-misc.o
 obj-$(CONFIG_EXTCON_RT8973A)	+= extcon-rt8973a.o
 obj-$(CONFIG_EXTCON_SM5502)	+= extcon-sm5502.o
 obj-$(CONFIG_EXTCON_USB_GPIO)	+= extcon-usb-gpio.o

drivers/extcon/extcon-adc-jack.c

@@ -3,6 +3,9 @@
  *
  * Analog Jack extcon driver with ADC-based detection capability.
  *
+ * Copyright (C) 2016 Samsung Electronics
+ * Chanwoo Choi <cw00.choi@samsung.com>
+ *
  * Copyright (C) 2012 Samsung Electronics
  * MyungJoo Ham <myungjoo.ham@samsung.com>
  *
@@ -58,7 +61,7 @@ static void adc_jack_handler(struct work_struct *work)
 	struct adc_jack_data *data = container_of(to_delayed_work(work),
 			struct adc_jack_data,
 			handler);
-	u32 state = 0;
+	struct adc_jack_cond *def;
 	int ret, adc_val;
 	int i;
 
@@ -70,17 +73,18 @@ static void adc_jack_handler(struct work_struct *work)
 
 	/* Get state from adc value with adc_conditions */
 	for (i = 0; i < data->num_conditions; i++) {
-		struct adc_jack_cond *def = &data->adc_conditions[i];
-		if (!def->state)
-			break;
+		def = &data->adc_conditions[i];
 		if (def->min_adc <= adc_val && def->max_adc >= adc_val) {
-			state = def->state;
-			break;
+			extcon_set_state_sync(data->edev, def->id, true);
+			return;
 		}
 	}
-	/* if no def has met, it means state = 0 (no cables attached) */
 
-	extcon_set_state(data->edev, state);
+	/* Set the detached state if adc value is not included in the range */
+	for (i = 0; i < data->num_conditions; i++) {
+		def = &data->adc_conditions[i];
+		extcon_set_state_sync(data->edev, def->id, false);
+	}
 }
 
 static irqreturn_t adc_jack_irq_thread(int irq, void *_data)
@@ -114,16 +118,14 @@ static int adc_jack_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
-	if (!pdata->adc_conditions ||
-			!pdata->adc_conditions[0].state) {
+	if (!pdata->adc_conditions) {
 		dev_err(&pdev->dev, "error: adc_conditions not defined.\n");
 		return -EINVAL;
 	}
 	data->adc_conditions = pdata->adc_conditions;
 
 	/* Check the length of array and set num_conditions */
-	for (i = 0; data->adc_conditions[i].state; i++)
-		;
+	for (i = 0; data->adc_conditions[i].id != EXTCON_NONE; i++);
 	data->num_conditions = i;
 
 	data->chan = iio_channel_get(&pdev->dev, pdata->consumer_channel);
@@ -158,6 +160,7 @@ static int adc_jack_probe(struct platform_device *pdev)
 	if (data->wakeup_source)
 		device_init_wakeup(&pdev->dev, 1);
 
+	adc_jack_handler(&data->handler.work);
 	return 0;
 }
 

drivers/extcon/extcon-arizona.c

@@ -183,7 +183,7 @@ static void arizona_extcon_hp_clamp(struct arizona_extcon_info *info,
 		if (clamp)
 			val = ARIZONA_RMV_SHRT_HP1L;
 		break;
-	};
+	}
 
 	snd_soc_dapm_mutex_lock(arizona->dapm);
 
@@ -614,7 +614,7 @@ static irqreturn_t arizona_hpdet_irq(int irq, void *data)
 	}
 
 	/* If the cable was removed while measuring ignore the result */
-	ret = extcon_get_cable_state_(info->edev, EXTCON_MECHANICAL);
+	ret = extcon_get_state(info->edev, EXTCON_MECHANICAL);
 	if (ret < 0) {
 		dev_err(arizona->dev, "Failed to check cable state: %d\n",
 			ret);
@@ -649,7 +649,7 @@ static irqreturn_t arizona_hpdet_irq(int irq, void *data)
 	else
 		report = EXTCON_JACK_HEADPHONE;
 
-	ret = extcon_set_cable_state_(info->edev, report, true);
+	ret = extcon_set_state_sync(info->edev, report, true);
 	if (ret != 0)
 		dev_err(arizona->dev, "Failed to report HP/line: %d\n",
 			ret);
@@ -732,7 +732,7 @@ err:
 			   ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC);
 
 	/* Just report headphone */
-	ret = extcon_set_cable_state_(info->edev, EXTCON_JACK_HEADPHONE, true);
+	ret = extcon_set_state_sync(info->edev, EXTCON_JACK_HEADPHONE, true);
 	if (ret != 0)
 		dev_err(arizona->dev, "Failed to report headphone: %d\n", ret);
 
@@ -789,7 +789,7 @@ err:
 			   ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC);
 
 	/* Just report headphone */
-	ret = extcon_set_cable_state_(info->edev, EXTCON_JACK_HEADPHONE, true);
+	ret = extcon_set_state_sync(info->edev, EXTCON_JACK_HEADPHONE, true);
 	if (ret != 0)
 		dev_err(arizona->dev, "Failed to report headphone: %d\n", ret);
 
@@ -829,7 +829,7 @@ static void arizona_micd_detect(struct work_struct *work)
 	mutex_lock(&info->lock);
 
 	/* If the cable was removed while measuring ignore the result */
-	ret = extcon_get_cable_state_(info->edev, EXTCON_MECHANICAL);
+	ret = extcon_get_state(info->edev, EXTCON_MECHANICAL);
 	if (ret < 0) {
 		dev_err(arizona->dev, "Failed to check cable state: %d\n",
 				ret);
@@ -914,7 +914,7 @@ static void arizona_micd_detect(struct work_struct *work)
 
 		arizona_identify_headphone(info);
 
-		ret = extcon_set_cable_state_(info->edev,
+		ret = extcon_set_state_sync(info->edev,
 					      EXTCON_JACK_MICROPHONE, true);
 		if (ret != 0)
 			dev_err(arizona->dev, "Headset report failed: %d\n",
@@ -1108,7 +1108,7 @@ static irqreturn_t arizona_jackdet(int irq, void *data)
 
 	if (info->last_jackdet == present) {
 		dev_dbg(arizona->dev, "Detected jack\n");
-		ret = extcon_set_cable_state_(info->edev,
+		ret = extcon_set_state_sync(info->edev,
 					      EXTCON_MECHANICAL, true);
 
 		if (ret != 0)
@@ -1149,10 +1149,13 @@ static irqreturn_t arizona_jackdet(int irq, void *data)
 					 info->micd_ranges[i].key, 0);
 		input_sync(info->input);
 
-		ret = extcon_update_state(info->edev, 0xffffffff, 0);
-		if (ret != 0)
-			dev_err(arizona->dev, "Removal report failed: %d\n",
-				ret);
+		for (i = 0; i < ARRAY_SIZE(arizona_cable) - 1; i++) {
+			ret = extcon_set_state_sync(info->edev,
+					arizona_cable[i], false);
+			if (ret != 0)
+				dev_err(arizona->dev,
+					"Removal report failed: %d\n", ret);
+		}
 
 		regmap_update_bits(arizona->regmap,
 				   ARIZONA_JACK_DETECT_DEBOUNCE,

drivers/extcon/extcon-axp288.c

@@ -189,19 +189,19 @@ static int axp288_handle_chrg_det_event(struct axp288_extcon_info *info)
 
 	switch (chrg_type) {
 	case DET_STAT_SDP:
-		dev_dbg(info->dev, "sdp cable is connecetd\n");
+		dev_dbg(info->dev, "sdp cable is connected\n");
 		notify_otg = true;
 		notify_charger = true;
 		cable = EXTCON_CHG_USB_SDP;
 		break;
 	case DET_STAT_CDP:
-		dev_dbg(info->dev, "cdp cable is connecetd\n");
+		dev_dbg(info->dev, "cdp cable is connected\n");
 		notify_otg = true;
 		notify_charger = true;
 		cable = EXTCON_CHG_USB_CDP;
 		break;
 	case DET_STAT_DCP:
-		dev_dbg(info->dev, "dcp cable is connecetd\n");
+		dev_dbg(info->dev, "dcp cable is connected\n");
 		notify_charger = true;
 		cable = EXTCON_CHG_USB_DCP;
 		break;
@@ -226,7 +226,7 @@ notify_otg:
 	}
 
 	if (notify_charger)
-		extcon_set_cable_state_(info->edev, cable, vbus_attach);
+		extcon_set_state_sync(info->edev, cable, vbus_attach);
 
 	/* Clear the flags on disconnect event */
 	if (!vbus_attach)

drivers/extcon/extcon-gpio.c

@@ -49,7 +49,8 @@ static void gpio_extcon_work(struct work_struct *work)
 	state = gpiod_get_value_cansleep(data->id_gpiod);
 	if (data->pdata->gpio_active_low)
 		state = !state;
-	extcon_set_state(data->edev, state);
+
+	extcon_set_state_sync(data->edev, data->pdata->extcon_id, state);
 }
 
 static irqreturn_t gpio_irq_handler(int irq, void *dev_id)

drivers/extcon/extcon-max14577.c

@@ -3,7 +3,7 @@
  *
  * Copyright (C) 2013,2014 Samsung Electronics
  * Chanwoo Choi <cw00.choi@samsung.com>
- * Krzysztof Kozlowski <k.kozlowski@samsung.com>
+ * Krzysztof Kozlowski <krzk@kernel.org>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -357,7 +357,7 @@ static int max14577_muic_jig_handler(struct max14577_muic_info *info,
 	if (ret < 0)
 		return ret;
 
-	extcon_set_cable_state_(info->edev, EXTCON_JIG, attached);
+	extcon_set_state_sync(info->edev, EXTCON_JIG, attached);
 
 	return 0;
 }
@@ -454,24 +454,24 @@ static int max14577_muic_chg_handler(struct max14577_muic_info *info)
 		if (ret < 0)
 			return ret;
 
-		extcon_set_cable_state_(info->edev, EXTCON_USB, attached);
-		extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SDP,
+		extcon_set_state_sync(info->edev, EXTCON_USB, attached);
+		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SDP,
 					attached);
 		break;
 	case MAX14577_CHARGER_TYPE_DEDICATED_CHG:
-		extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_DCP,
+		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP,
 					attached);
 		break;
 	case MAX14577_CHARGER_TYPE_DOWNSTREAM_PORT:
-		extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_CDP,
+		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_CDP,
 					attached);
 		break;
 	case MAX14577_CHARGER_TYPE_SPECIAL_500MA:
-		extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SLOW,
+		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SLOW,
 					attached);
 		break;
 	case MAX14577_CHARGER_TYPE_SPECIAL_1A:
-		extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_FAST,
+		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_FAST,
 					attached);
 		break;
 	case MAX14577_CHARGER_TYPE_NONE:
@@ -791,6 +791,6 @@ static struct platform_driver max14577_muic_driver = {
 module_platform_driver(max14577_muic_driver);
 
 MODULE_DESCRIPTION("Maxim 14577/77836 Extcon driver");
-MODULE_AUTHOR("Chanwoo Choi <cw00.choi@samsung.com>, Krzysztof Kozlowski <k.kozlowski@samsung.com>");
+MODULE_AUTHOR("Chanwoo Choi <cw00.choi@samsung.com>, Krzysztof Kozlowski <krzk@kernel.org>");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS("platform:extcon-max14577");

drivers/extcon/extcon-max3355.c

@@ -39,16 +39,16 @@ static irqreturn_t max3355_id_irq(int irq, void *dev_id)
 		 * As we don't have event for USB peripheral cable attached,
 		 * we simulate USB peripheral attach here.
 		 */
-		extcon_set_cable_state_(data->edev, EXTCON_USB_HOST, false);
-		extcon_set_cable_state_(data->edev, EXTCON_USB, true);
+		extcon_set_state_sync(data->edev, EXTCON_USB_HOST, false);
+		extcon_set_state_sync(data->edev, EXTCON_USB, true);
 	} else {
 		/*
 		 * ID = 0 means USB HOST cable attached.
 		 * As we don't have event for USB peripheral cable detached,
 		 * we simulate USB peripheral detach here.
 		 */
-		extcon_set_cable_state_(data->edev, EXTCON_USB, false);
-		extcon_set_cable_state_(data->edev, EXTCON_USB_HOST, true);
+		extcon_set_state_sync(data->edev, EXTCON_USB, false);
+		extcon_set_state_sync(data->edev, EXTCON_USB_HOST, true);
 	}
 
 	return IRQ_HANDLED;

drivers/extcon/extcon-max77693.c

@@ -505,8 +505,8 @@ static int max77693_muic_dock_handler(struct max77693_muic_info *info,
 		if (ret < 0)
 			return ret;
 
-		extcon_set_cable_state_(info->edev, EXTCON_DOCK, attached);
-		extcon_set_cable_state_(info->edev, EXTCON_DISP_MHL, attached);
+		extcon_set_state_sync(info->edev, EXTCON_DOCK, attached);
+		extcon_set_state_sync(info->edev, EXTCON_DISP_MHL, attached);
 		goto out;
 	case MAX77693_MUIC_ADC_AUDIO_MODE_REMOTE:	/* Dock-Desk */
 		dock_id = EXTCON_DOCK;
@@ -514,8 +514,8 @@ static int max77693_muic_dock_handler(struct max77693_muic_info *info,
 	case MAX77693_MUIC_ADC_AV_CABLE_NOLOAD:		/* Dock-Audio */
 		dock_id = EXTCON_DOCK;
 		if (!attached) {
-			extcon_set_cable_state_(info->edev, EXTCON_USB, false);
-			extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SDP,
+			extcon_set_state_sync(info->edev, EXTCON_USB, false);
+			extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SDP,
 						false);
 		}
 		break;
@@ -530,7 +530,7 @@ static int max77693_muic_dock_handler(struct max77693_muic_info *info,
 					attached);
 	if (ret < 0)
 		return ret;
-	extcon_set_cable_state_(info->edev, dock_id, attached);
+	extcon_set_state_sync(info->edev, dock_id, attached);
 
 out:
 	return 0;
@@ -596,7 +596,7 @@ static int max77693_muic_adc_ground_handler(struct max77693_muic_info *info)
 						attached);
 		if (ret < 0)
 			return ret;
-		extcon_set_cable_state_(info->edev, EXTCON_USB_HOST, attached);
+		extcon_set_state_sync(info->edev, EXTCON_USB_HOST, attached);
 		break;
 	case MAX77693_MUIC_GND_AV_CABLE_LOAD:
 		/* Audio Video Cable with load, PATH:AUDIO */
@@ -604,14 +604,14 @@ static int max77693_muic_adc_ground_handler(struct max77693_muic_info *info)
 						attached);
 		if (ret < 0)
 			return ret;
-		extcon_set_cable_state_(info->edev, EXTCON_USB, attached);
-		extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SDP,
+		extcon_set_state_sync(info->edev, EXTCON_USB, attached);
+		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SDP,
 					attached);
 		break;
 	case MAX77693_MUIC_GND_MHL:
 	case MAX77693_MUIC_GND_MHL_VB:
 		/* MHL or MHL with USB/TA cable */
-		extcon_set_cable_state_(info->edev, EXTCON_DISP_MHL, attached);
+		extcon_set_state_sync(info->edev, EXTCON_DISP_MHL, attached);
 		break;
 	default:
 		dev_err(info->dev, "failed to detect %s cable of gnd type\n",
@@ -653,7 +653,7 @@ static int max77693_muic_jig_handler(struct max77693_muic_info *info,
 	if (ret < 0)
 		return ret;
 
-	extcon_set_cable_state_(info->edev, EXTCON_JIG, attached);
+	extcon_set_state_sync(info->edev, EXTCON_JIG, attached);
 
 	return 0;
 }
@@ -807,10 +807,10 @@ static int max77693_muic_chg_handler(struct max77693_muic_info *info)
 			 * - Support charging through micro-usb port without
 			 *   data connection
 			 */
-			extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_DCP,
+			extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP,
 						attached);
 			if (!cable_attached)
-				extcon_set_cable_state_(info->edev,
+				extcon_set_state_sync(info->edev,
 					EXTCON_DISP_MHL, cable_attached);
 			break;
 		}
@@ -834,13 +834,13 @@ static int max77693_muic_chg_handler(struct max77693_muic_info *info)
 			 * - Support charging through micro-usb port without
 			 *   data connection.
 			 */
-			extcon_set_cable_state_(info->edev, EXTCON_USB,
+			extcon_set_state_sync(info->edev, EXTCON_USB,
 						attached);
-			extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SDP,
+			extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SDP,
 						attached);
 
 			if (!cable_attached)
-				extcon_set_cable_state_(info->edev, EXTCON_DOCK,
+				extcon_set_state_sync(info->edev, EXTCON_DOCK,
 							cable_attached);
 			break;
 		case MAX77693_MUIC_ADC_RESERVED_ACC_3:		/* Dock-Smart */
@@ -869,9 +869,9 @@ static int max77693_muic_chg_handler(struct max77693_muic_info *info)
 			if (ret < 0)
 				return ret;
 
-			extcon_set_cable_state_(info->edev, EXTCON_DOCK,
+			extcon_set_state_sync(info->edev, EXTCON_DOCK,
 						attached);
-			extcon_set_cable_state_(info->edev, EXTCON_DISP_MHL,
+			extcon_set_state_sync(info->edev, EXTCON_DISP_MHL,
 						attached);
 			break;
 		}
@@ -905,28 +905,28 @@ static int max77693_muic_chg_handler(struct max77693_muic_info *info)
 			if (ret < 0)
 				return ret;
 
-			extcon_set_cable_state_(info->edev, EXTCON_USB,
+			extcon_set_state_sync(info->edev, EXTCON_USB,
 						attached);
-			extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SDP,
+			extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SDP,
 						attached);
 			break;
 		case MAX77693_CHARGER_TYPE_DEDICATED_CHG:
 			/* Only TA cable */
-			extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_DCP,
+			extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP,
 						attached);
 			break;
 		}
 		break;
 	case MAX77693_CHARGER_TYPE_DOWNSTREAM_PORT:
-		extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_CDP,
+		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_CDP,
 					attached);
 		break;
 	case MAX77693_CHARGER_TYPE_APPLE_500MA:
-		extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SLOW,
+		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SLOW,
 					attached);
 		break;
 	case MAX77693_CHARGER_TYPE_APPLE_1A_2A:
-		extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_FAST,
+		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_FAST,
 					attached);
 		break;
 	case MAX77693_CHARGER_TYPE_DEAD_BATTERY:

drivers/extcon/extcon-max77843.c

@@ -346,7 +346,7 @@ static int max77843_muic_adc_gnd_handler(struct max77843_muic_info *info)
 		if (ret < 0)
 			return ret;
 
-		extcon_set_cable_state_(info->edev, EXTCON_USB_HOST, attached);
+		extcon_set_state_sync(info->edev, EXTCON_USB_HOST, attached);
 		break;
 	case MAX77843_MUIC_GND_MHL_VB:
 	case MAX77843_MUIC_GND_MHL:
@@ -356,7 +356,7 @@ static int max77843_muic_adc_gnd_handler(struct max77843_muic_info *info)
 		if (ret < 0)
 			return ret;
 
-		extcon_set_cable_state_(info->edev, EXTCON_DISP_MHL, attached);
+		extcon_set_state_sync(info->edev, EXTCON_DISP_MHL, attached);
 		break;
 	default:
 		dev_err(info->dev, "failed to detect %s accessory(gnd:0x%x)\n",
@@ -392,7 +392,7 @@ static int max77843_muic_jig_handler(struct max77843_muic_info *info,
 	if (ret < 0)
 		return ret;
 
-	extcon_set_cable_state_(info->edev, EXTCON_JIG, attached);
+	extcon_set_state_sync(info->edev, EXTCON_JIG, attached);
 
 	return 0;
 }
@@ -486,8 +486,8 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info)
 		if (ret < 0)
 			return ret;
 
-		extcon_set_cable_state_(info->edev, EXTCON_USB, attached);
-		extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SDP,
+		extcon_set_state_sync(info->edev, EXTCON_USB, attached);
+		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SDP,
 					attached);
 		break;
 	case MAX77843_MUIC_CHG_DOWNSTREAM:
@@ -497,7 +497,7 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info)
 		if (ret < 0)
 			return ret;
 
-		extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_CDP,
+		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_CDP,
 					attached);
 		break;
 	case MAX77843_MUIC_CHG_DEDICATED:
@@ -507,7 +507,7 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info)
 		if (ret < 0)
 			return ret;
 
-		extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_DCP,
+		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP,
 					attached);
 		break;
 	case MAX77843_MUIC_CHG_SPECIAL_500MA:
@@ -517,7 +517,7 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info)
 		if (ret < 0)
 			return ret;
 
-		extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SLOW,
+		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SLOW,
 					attached);
 		break;
 	case MAX77843_MUIC_CHG_SPECIAL_1A:
@@ -527,7 +527,7 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info)
 		if (ret < 0)
 			return ret;
 
-		extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_FAST,
+		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_FAST,
 					attached);
 		break;
 	case MAX77843_MUIC_CHG_GND:
@@ -536,10 +536,10 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info)
 
 		/* Charger cable on MHL accessory is attach or detach */
 		if (gnd_type == MAX77843_MUIC_GND_MHL_VB)
-			extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_DCP,
+			extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP,
 						true);
 		else if (gnd_type == MAX77843_MUIC_GND_MHL)
-			extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_DCP,
+			extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP,
 						false);
 		break;
 	case MAX77843_MUIC_CHG_NONE:

drivers/extcon/extcon-max8997.c

@@ -331,11 +331,11 @@ static int max8997_muic_handle_usb(struct max8997_muic_info *info,
 
 	switch (usb_type) {
 	case MAX8997_USB_HOST:
-		extcon_set_cable_state_(info->edev, EXTCON_USB_HOST, attached);
+		extcon_set_state_sync(info->edev, EXTCON_USB_HOST, attached);
 		break;
 	case MAX8997_USB_DEVICE:
-		extcon_set_cable_state_(info->edev, EXTCON_USB, attached);
-		extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SDP,
+		extcon_set_state_sync(info->edev, EXTCON_USB, attached);
+		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SDP,
 					attached);
 		break;
 	default:
@@ -361,7 +361,7 @@ static int max8997_muic_handle_dock(struct max8997_muic_info *info,
 	switch (cable_type) {
 	case MAX8997_MUIC_ADC_AV_CABLE_NOLOAD:
 	case MAX8997_MUIC_ADC_FACTORY_MODE_UART_ON:
-		extcon_set_cable_state_(info->edev, EXTCON_DOCK, attached);
+		extcon_set_state_sync(info->edev, EXTCON_DOCK, attached);
 		break;
 	default:
 		dev_err(info->dev, "failed to detect %s dock device\n",
@@ -384,7 +384,7 @@ static int max8997_muic_handle_jig_uart(struct max8997_muic_info *info,
 		return ret;
 	}
 
-	extcon_set_cable_state_(info->edev, EXTCON_JIG, attached);
+	extcon_set_state_sync(info->edev, EXTCON_JIG, attached);
 
 	return 0;
 }
@@ -406,7 +406,7 @@ static int max8997_muic_adc_handler(struct max8997_muic_info *info)
 			return ret;
 		break;
 	case MAX8997_MUIC_ADC_MHL:
-		extcon_set_cable_state_(info->edev, EXTCON_DISP_MHL, attached);
+		extcon_set_state_sync(info->edev, EXTCON_DISP_MHL, attached);
 		break;
 	case MAX8997_MUIC_ADC_FACTORY_MODE_USB_OFF:
 	case MAX8997_MUIC_ADC_FACTORY_MODE_USB_ON:
@@ -489,19 +489,19 @@ static int max8997_muic_chg_handler(struct max8997_muic_info *info)
 		}
 		break;
 	case MAX8997_CHARGER_TYPE_DOWNSTREAM_PORT:
-		extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_CDP,
+		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_CDP,
 					attached);
 		break;
 	case MAX8997_CHARGER_TYPE_DEDICATED_CHG:
-		extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_DCP,
+		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP,
 					attached);
 		break;
 	case MAX8997_CHARGER_TYPE_500MA:
-		extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SLOW,
+		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SLOW,
 					attached);
 		break;
 	case MAX8997_CHARGER_TYPE_1A:
-		extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_FAST,
+		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_FAST,
 					attached);
 		break;
 	default:

drivers/extcon/extcon-palmas.c

@@ -61,7 +61,7 @@ static irqreturn_t palmas_vbus_irq_handler(int irq, void *_palmas_usb)
 	if (vbus_line_state & PALMAS_INT3_LINE_STATE_VBUS) {
 		if (palmas_usb->linkstat != PALMAS_USB_STATE_VBUS) {
 			palmas_usb->linkstat = PALMAS_USB_STATE_VBUS;
-			extcon_set_cable_state_(edev, EXTCON_USB, true);
+			extcon_set_state_sync(edev, EXTCON_USB, true);
 			dev_info(palmas_usb->dev, "USB cable is attached\n");
 		} else {
 			dev_dbg(palmas_usb->dev,
@@ -70,7 +70,7 @@ static irqreturn_t palmas_vbus_irq_handler(int irq, void *_palmas_usb)
 	} else if (!(vbus_line_state & PALMAS_INT3_LINE_STATE_VBUS)) {
 		if (palmas_usb->linkstat == PALMAS_USB_STATE_VBUS) {
 			palmas_usb->linkstat = PALMAS_USB_STATE_DISCONNECT;
-			extcon_set_cable_state_(edev, EXTCON_USB, false);
+			extcon_set_state_sync(edev, EXTCON_USB, false);
 			dev_info(palmas_usb->dev, "USB cable is detached\n");
 		} else {
 			dev_dbg(palmas_usb->dev,
@@ -98,7 +98,7 @@ static irqreturn_t palmas_id_irq_handler(int irq, void *_palmas_usb)
 			PALMAS_USB_ID_INT_LATCH_CLR,
 			PALMAS_USB_ID_INT_EN_HI_CLR_ID_GND);
 		palmas_usb->linkstat = PALMAS_USB_STATE_ID;
-		extcon_set_cable_state_(edev, EXTCON_USB_HOST, true);
+		extcon_set_state_sync(edev, EXTCON_USB_HOST, true);
 		dev_info(palmas_usb->dev, "USB-HOST cable is attached\n");
 	} else if ((set & PALMAS_USB_ID_INT_SRC_ID_FLOAT) &&
 				(id_src & PALMAS_USB_ID_INT_SRC_ID_FLOAT)) {
@@ -106,17 +106,17 @@ static irqreturn_t palmas_id_irq_handler(int irq, void *_palmas_usb)
 			PALMAS_USB_ID_INT_LATCH_CLR,
 			PALMAS_USB_ID_INT_EN_HI_CLR_ID_FLOAT);
 		palmas_usb->linkstat = PALMAS_USB_STATE_DISCONNECT;
-		extcon_set_cable_state_(edev, EXTCON_USB_HOST, false);
+		extcon_set_state_sync(edev, EXTCON_USB_HOST, false);
 		dev_info(palmas_usb->dev, "USB-HOST cable is detached\n");
 	} else if ((palmas_usb->linkstat == PALMAS_USB_STATE_ID) &&
 				(!(set & PALMAS_USB_ID_INT_SRC_ID_GND))) {
 		palmas_usb->linkstat = PALMAS_USB_STATE_DISCONNECT;
-		extcon_set_cable_state_(edev, EXTCON_USB_HOST, false);
+		extcon_set_state_sync(edev, EXTCON_USB_HOST, false);
 		dev_info(palmas_usb->dev, "USB-HOST cable is detached\n");
 	} else if ((palmas_usb->linkstat == PALMAS_USB_STATE_DISCONNECT) &&
 				(id_src & PALMAS_USB_ID_INT_SRC_ID_GND)) {
 		palmas_usb->linkstat = PALMAS_USB_STATE_ID;
-		extcon_set_cable_state_(edev, EXTCON_USB_HOST, true);
+		extcon_set_state_sync(edev, EXTCON_USB_HOST, true);
 		dev_info(palmas_usb->dev, " USB-HOST cable is attached\n");
 	}
 
@@ -137,10 +137,10 @@ static void palmas_gpio_id_detect(struct work_struct *work)
 	id = gpiod_get_value_cansleep(palmas_usb->id_gpiod);
 
 	if (id) {
-		extcon_set_cable_state_(edev, EXTCON_USB_HOST, false);
+		extcon_set_state_sync(edev, EXTCON_USB_HOST, false);
 		dev_info(palmas_usb->dev, "USB-HOST cable is detached\n");
 	} else {
-		extcon_set_cable_state_(edev, EXTCON_USB_HOST, true);
+		extcon_set_state_sync(edev, EXTCON_USB_HOST, true);
 		dev_info(palmas_usb->dev, "USB-HOST cable is attached\n");
 	}
 }

drivers/extcon/extcon-qcom-spmi-misc.c

@@ -0,0 +1,170 @@
+/**
+ * extcon-qcom-spmi-misc.c - Qualcomm USB extcon driver to support USB ID
+ *				detection based on extcon-usb-gpio.c.
+ *
+ * Copyright (C) 2016 Linaro, Ltd.
+ * Stephen Boyd <stephen.boyd@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/extcon.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+
+#define USB_ID_DEBOUNCE_MS	5	/* ms */
+
+struct qcom_usb_extcon_info {
+	struct extcon_dev *edev;
+	int irq;
+	struct delayed_work wq_detcable;
+	unsigned long debounce_jiffies;
+};
+
+static const unsigned int qcom_usb_extcon_cable[] = {
+	EXTCON_USB_HOST,
+	EXTCON_NONE,
+};
+
+static void qcom_usb_extcon_detect_cable(struct work_struct *work)
+{
+	bool id;
+	int ret;
+	struct qcom_usb_extcon_info *info = container_of(to_delayed_work(work),
+						    struct qcom_usb_extcon_info,
+						    wq_detcable);
+
+	/* check ID and update cable state */
+	ret = irq_get_irqchip_state(info->irq, IRQCHIP_STATE_LINE_LEVEL, &id);
+	if (ret)
+		return;
+
+	extcon_set_state(info->edev, EXTCON_USB_HOST, !id);
+}
+
+static irqreturn_t qcom_usb_irq_handler(int irq, void *dev_id)
+{
+	struct qcom_usb_extcon_info *info = dev_id;
+
+	queue_delayed_work(system_power_efficient_wq, &info->wq_detcable,
+			   info->debounce_jiffies);
+
+	return IRQ_HANDLED;
+}
+
+static int qcom_usb_extcon_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct qcom_usb_extcon_info *info;
+	int ret;
+
+	info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	info->edev = devm_extcon_dev_allocate(dev, qcom_usb_extcon_cable);
+	if (IS_ERR(info->edev)) {
+		dev_err(dev, "failed to allocate extcon device\n");
+		return -ENOMEM;
+	}
+
+	ret = devm_extcon_dev_register(dev, info->edev);
+	if (ret < 0) {
+		dev_err(dev, "failed to register extcon device\n");
+		return ret;
+	}
+
+	info->debounce_jiffies = msecs_to_jiffies(USB_ID_DEBOUNCE_MS);
+	INIT_DELAYED_WORK(&info->wq_detcable, qcom_usb_extcon_detect_cable);
+
+	info->irq = platform_get_irq_byname(pdev, "usb_id");
+	if (info->irq < 0)
+		return info->irq;
+
+	ret = devm_request_threaded_irq(dev, info->irq, NULL,
+					qcom_usb_irq_handler,
+					IRQF_TRIGGER_RISING |
+					IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+					pdev->name, info);
+	if (ret < 0) {
+		dev_err(dev, "failed to request handler for ID IRQ\n");
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, info);
+	device_init_wakeup(dev, 1);
+
+	/* Perform initial detection */
+	qcom_usb_extcon_detect_cable(&info->wq_detcable.work);
+
+	return 0;
+}
+
+static int qcom_usb_extcon_remove(struct platform_device *pdev)
+{
+	struct qcom_usb_extcon_info *info = platform_get_drvdata(pdev);
+
+	cancel_delayed_work_sync(&info->wq_detcable);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int qcom_usb_extcon_suspend(struct device *dev)
+{
+	struct qcom_usb_extcon_info *info = dev_get_drvdata(dev);
+	int ret = 0;
+
+	if (device_may_wakeup(dev))
+		ret = enable_irq_wake(info->irq);
+
+	return ret;
+}
+
+static int qcom_usb_extcon_resume(struct device *dev)
+{
+	struct qcom_usb_extcon_info *info = dev_get_drvdata(dev);
+	int ret = 0;
+
+	if (device_may_wakeup(dev))
+		ret = disable_irq_wake(info->irq);
+
+	return ret;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(qcom_usb_extcon_pm_ops,
+			 qcom_usb_extcon_suspend, qcom_usb_extcon_resume);
+
+static const struct of_device_id qcom_usb_extcon_dt_match[] = {
+	{ .compatible = "qcom,pm8941-misc", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, qcom_usb_extcon_dt_match);
+
+static struct platform_driver qcom_usb_extcon_driver = {
+	.probe		= qcom_usb_extcon_probe,
+	.remove		= qcom_usb_extcon_remove,
+	.driver		= {
+		.name	= "extcon-pm8941-misc",
+		.pm	= &qcom_usb_extcon_pm_ops,
+		.of_match_table = qcom_usb_extcon_dt_match,
+	},
+};
+module_platform_driver(qcom_usb_extcon_driver);
+
+MODULE_DESCRIPTION("QCOM USB ID extcon driver");
+MODULE_AUTHOR("Stephen Boyd <stephen.boyd@linaro.org>");
+MODULE_LICENSE("GPL v2");

drivers/extcon/extcon-rt8973a.c

@@ -398,9 +398,9 @@ static int rt8973a_muic_cable_handler(struct rt8973a_muic_info *info,
 		return ret;
 
 	/* Change the state of external accessory */
-	extcon_set_cable_state_(info->edev, id, attached);
+	extcon_set_state_sync(info->edev, id, attached);
 	if (id == EXTCON_USB)
-		extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SDP,
+		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SDP,
 					attached);
 
 	return 0;

drivers/extcon/extcon-sm5502.c

@@ -411,9 +411,9 @@ static int sm5502_muic_cable_handler(struct sm5502_muic_info *info,
 		return ret;
 
 	/* Change the state of external accessory */
-	extcon_set_cable_state_(info->edev, id, attached);
+	extcon_set_state_sync(info->edev, id, attached);
 	if (id == EXTCON_USB)
-		extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SDP,
+		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SDP,
 					attached);
 
 	return 0;

drivers/extcon/extcon-usb-gpio.c

@@ -63,16 +63,16 @@ static void usb_extcon_detect_cable(struct work_struct *work)
 		 * As we don't have event for USB peripheral cable attached,
 		 * we simulate USB peripheral attach here.
 		 */
-		extcon_set_cable_state_(info->edev, EXTCON_USB_HOST, false);
-		extcon_set_cable_state_(info->edev, EXTCON_USB, true);
+		extcon_set_state_sync(info->edev, EXTCON_USB_HOST, false);
+		extcon_set_state_sync(info->edev, EXTCON_USB, true);
 	} else {
 		/*
 		 * ID = 0 means USB HOST cable attached.
 		 * As we don't have event for USB peripheral cable detached,
 		 * we simulate USB peripheral detach here.
 		 */
-		extcon_set_cable_state_(info->edev, EXTCON_USB, false);
-		extcon_set_cable_state_(info->edev, EXTCON_USB_HOST, true);
+		extcon_set_state_sync(info->edev, EXTCON_USB, false);
+		extcon_set_state_sync(info->edev, EXTCON_USB_HOST, true);
 	}
 }
 

drivers/extcon/extcon.c

@@ -38,43 +38,159 @@
 #define SUPPORTED_CABLE_MAX	32
 #define CABLE_NAME_MAX		30
 
-static const char *extcon_name[] =  {
-	[EXTCON_NONE]			= "NONE",
+struct __extcon_info {
+	unsigned int type;
+	unsigned int id;
+	const char *name;
+
+} extcon_info[] = {
+	[EXTCON_NONE] = {
+		.type = EXTCON_TYPE_MISC,
+		.id = EXTCON_NONE,
+		.name = "NONE",
+	},
 
 	/* USB external connector */
-	[EXTCON_USB]			= "USB",
-	[EXTCON_USB_HOST]		= "USB-HOST",
+	[EXTCON_USB] = {
+		.type = EXTCON_TYPE_USB,
+		.id = EXTCON_USB,
+		.name = "USB",
+	},
+	[EXTCON_USB_HOST] = {
+		.type = EXTCON_TYPE_USB,
+		.id = EXTCON_USB_HOST,
+		.name = "USB_HOST",
+	},
 
 	/* Charging external connector */
-	[EXTCON_CHG_USB_SDP]		= "SDP",
-	[EXTCON_CHG_USB_DCP]		= "DCP",
-	[EXTCON_CHG_USB_CDP]		= "CDP",
-	[EXTCON_CHG_USB_ACA]		= "ACA",
-	[EXTCON_CHG_USB_FAST]		= "FAST-CHARGER",
-	[EXTCON_CHG_USB_SLOW]		= "SLOW-CHARGER",
+	[EXTCON_CHG_USB_SDP] = {
+		.type = EXTCON_TYPE_CHG | EXTCON_TYPE_USB,
+		.id = EXTCON_CHG_USB_SDP,
+		.name = "SDP",
+	},
+	[EXTCON_CHG_USB_DCP] = {
+		.type = EXTCON_TYPE_CHG | EXTCON_TYPE_USB,
+		.id = EXTCON_CHG_USB_DCP,
+		.name = "DCP",
+	},
+	[EXTCON_CHG_USB_CDP] = {
+		.type = EXTCON_TYPE_CHG | EXTCON_TYPE_USB,
+		.id = EXTCON_CHG_USB_CDP,
+		.name = "CDP",
+	},
+	[EXTCON_CHG_USB_ACA] = {
+		.type = EXTCON_TYPE_CHG | EXTCON_TYPE_USB,
+		.id = EXTCON_CHG_USB_ACA,
+		.name = "ACA",
+	},
+	[EXTCON_CHG_USB_FAST] = {
+		.type = EXTCON_TYPE_CHG | EXTCON_TYPE_USB,
+		.id = EXTCON_CHG_USB_FAST,
+		.name = "FAST-CHARGER",
+	},
+	[EXTCON_CHG_USB_SLOW] = {
+		.type = EXTCON_TYPE_CHG | EXTCON_TYPE_USB,
+		.id = EXTCON_CHG_USB_SLOW,
+		.name = "SLOW-CHARGER",
+	},
+	[EXTCON_CHG_WPT] = {
+		.type = EXTCON_TYPE_CHG,
+		.id = EXTCON_CHG_WPT,
+		.name = "WPT",
+	},
 
 	/* Jack external connector */
-	[EXTCON_JACK_MICROPHONE]	= "MICROPHONE",
-	[EXTCON_JACK_HEADPHONE]		= "HEADPHONE",
-	[EXTCON_JACK_LINE_IN]		= "LINE-IN",
-	[EXTCON_JACK_LINE_OUT]		= "LINE-OUT",
-	[EXTCON_JACK_VIDEO_IN]		= "VIDEO-IN",
-	[EXTCON_JACK_VIDEO_OUT]		= "VIDEO-OUT",
-	[EXTCON_JACK_SPDIF_IN]		= "SPDIF-IN",
-	[EXTCON_JACK_SPDIF_OUT]		= "SPDIF-OUT",
+	[EXTCON_JACK_MICROPHONE] = {
+		.type = EXTCON_TYPE_JACK,
+		.id = EXTCON_JACK_MICROPHONE,
+		.name = "MICROPHONE",
+	},
+	[EXTCON_JACK_HEADPHONE] = {
+		.type = EXTCON_TYPE_JACK,
+		.id = EXTCON_JACK_HEADPHONE,
+		.name = "HEADPHONE",
+	},
+	[EXTCON_JACK_LINE_IN] = {
+		.type = EXTCON_TYPE_JACK,
+		.id = EXTCON_JACK_LINE_IN,
+		.name = "LINE-IN",
+	},
+	[EXTCON_JACK_LINE_OUT] = {
+		.type = EXTCON_TYPE_JACK,
+		.id = EXTCON_JACK_LINE_OUT,
+		.name = "LINE-OUT",
+	},
+	[EXTCON_JACK_VIDEO_IN] = {
+		.type = EXTCON_TYPE_JACK,
+		.id = EXTCON_JACK_VIDEO_IN,
+		.name = "VIDEO-IN",
+	},
+	[EXTCON_JACK_VIDEO_OUT] = {
+		.type = EXTCON_TYPE_JACK,
+		.id = EXTCON_JACK_VIDEO_OUT,
+		.name = "VIDEO-OUT",
+	},
+	[EXTCON_JACK_SPDIF_IN] = {
+		.type = EXTCON_TYPE_JACK,
+		.id = EXTCON_JACK_SPDIF_IN,
+		.name = "SPDIF-IN",
+	},
+	[EXTCON_JACK_SPDIF_OUT] = {
+		.type = EXTCON_TYPE_JACK,
+		.id = EXTCON_JACK_SPDIF_OUT,
+		.name = "SPDIF-OUT",
+	},
 
 	/* Display external connector */
-	[EXTCON_DISP_HDMI]		= "HDMI",
-	[EXTCON_DISP_MHL]		= "MHL",
-	[EXTCON_DISP_DVI]		= "DVI",
-	[EXTCON_DISP_VGA]		= "VGA",
+	[EXTCON_DISP_HDMI] = {
+		.type = EXTCON_TYPE_DISP,
+		.id = EXTCON_DISP_HDMI,
+		.name = "HDMI",
+	},
+	[EXTCON_DISP_MHL] = {
+		.type = EXTCON_TYPE_DISP,
+		.id = EXTCON_DISP_MHL,
+		.name = "MHL",
+	},
+	[EXTCON_DISP_DVI] = {
+		.type = EXTCON_TYPE_DISP,
+		.id = EXTCON_DISP_DVI,
+		.name = "DVI",
+	},
+	[EXTCON_DISP_VGA] = {
+		.type = EXTCON_TYPE_DISP,
+		.id = EXTCON_DISP_VGA,
+		.name = "VGA",
+	},
+	[EXTCON_DISP_DP] = {
+		.type = EXTCON_TYPE_DISP | EXTCON_TYPE_USB,
+		.id = EXTCON_DISP_DP,
+		.name = "DP",
+	},
+	[EXTCON_DISP_HMD] = {
+		.type = EXTCON_TYPE_DISP | EXTCON_TYPE_USB,
+		.id = EXTCON_DISP_HMD,
+		.name = "HMD",
+	},
 
 	/* Miscellaneous external connector */
-	[EXTCON_DOCK]			= "DOCK",
-	[EXTCON_JIG]			= "JIG",
-	[EXTCON_MECHANICAL]		= "MECHANICAL",
-
-	NULL,
+	[EXTCON_DOCK] = {
+		.type = EXTCON_TYPE_MISC,
+		.id = EXTCON_DOCK,
+		.name = "DOCK",
+	},
+	[EXTCON_JIG] = {
+		.type = EXTCON_TYPE_MISC,
+		.id = EXTCON_JIG,
+		.name = "JIG",
+	},
+	[EXTCON_MECHANICAL] = {
+		.type = EXTCON_TYPE_MISC,
+		.id = EXTCON_MECHANICAL,
+		.name = "MECHANICAL",
+	},
+
+	{ /* sentinel */ }
 };
 
 /**
@@ -95,6 +211,16 @@ struct extcon_cable {
 	struct device_attribute attr_state;
 
 	struct attribute *attrs[3]; /* to be fed to attr_g.attrs */
+
+	union extcon_property_value usb_propval[EXTCON_PROP_USB_CNT];
+	union extcon_property_value chg_propval[EXTCON_PROP_CHG_CNT];
+	union extcon_property_value jack_propval[EXTCON_PROP_JACK_CNT];
+	union extcon_property_value disp_propval[EXTCON_PROP_DISP_CNT];
+
+	unsigned long usb_bits[BITS_TO_LONGS(EXTCON_PROP_USB_CNT)];
+	unsigned long chg_bits[BITS_TO_LONGS(EXTCON_PROP_CHG_CNT)];
+	unsigned long jack_bits[BITS_TO_LONGS(EXTCON_PROP_JACK_CNT)];
+	unsigned long disp_bits[BITS_TO_LONGS(EXTCON_PROP_DISP_CNT)];
 };
 
 static struct class *extcon_class;
@@ -147,14 +273,93 @@ static int find_cable_index_by_id(struct extcon_dev *edev, const unsigned int id
 	return -EINVAL;
 }
 
-static bool is_extcon_changed(u32 prev, u32 new, int idx, bool *attached)
+static int get_extcon_type(unsigned int prop)
 {
-	if (((prev >> idx) & 0x1) != ((new >> idx) & 0x1)) {
-		*attached = ((new >> idx) & 0x1) ? true : false;
-		return true;
+	switch (prop) {
+	case EXTCON_PROP_USB_MIN ... EXTCON_PROP_USB_MAX:
+		return EXTCON_TYPE_USB;
+	case EXTCON_PROP_CHG_MIN ... EXTCON_PROP_CHG_MAX:
+		return EXTCON_TYPE_CHG;
+	case EXTCON_PROP_JACK_MIN ... EXTCON_PROP_JACK_MAX:
+		return EXTCON_TYPE_JACK;
+	case EXTCON_PROP_DISP_MIN ... EXTCON_PROP_DISP_MAX:
+		return EXTCON_TYPE_DISP;
+	default:
+		return -EINVAL;
 	}
+}
+
+static bool is_extcon_attached(struct extcon_dev *edev, unsigned int index)
+{
+	return !!(edev->state & BIT(index));
+}
+
+static bool is_extcon_changed(struct extcon_dev *edev, int index,
+				bool new_state)
+{
+	int state = !!(edev->state & BIT(index));
+	return (state != new_state);
+}
+
+static bool is_extcon_property_supported(unsigned int id, unsigned int prop)
+{
+	int type;
+
+	/* Check whether the property is supported or not. */
+	type = get_extcon_type(prop);
+	if (type < 0)
+		return false;
 
-	return false;
+	/* Check whether a specific extcon id supports the property or not. */
+	return !!(extcon_info[id].type & type);
+}
+
+static int is_extcon_property_capability(struct extcon_dev *edev,
+				unsigned int id, int index,unsigned int prop)
+{
+	struct extcon_cable *cable;
+	int type, ret;
+
+	/* Check whether the property is supported or not. */
+	type = get_extcon_type(prop);
+	if (type < 0)
+		return type;
+
+	cable = &edev->cables[index];
+
+	switch (type) {
+	case EXTCON_TYPE_USB:
+		ret = test_bit(prop - EXTCON_PROP_USB_MIN, cable->usb_bits);
+		break;
+	case EXTCON_TYPE_CHG:
+		ret = test_bit(prop - EXTCON_PROP_CHG_MIN, cable->chg_bits);
+		break;
+	case EXTCON_TYPE_JACK:
+		ret = test_bit(prop - EXTCON_PROP_JACK_MIN, cable->jack_bits);
+		break;
+	case EXTCON_TYPE_DISP:
+		ret = test_bit(prop - EXTCON_PROP_DISP_MIN, cable->disp_bits);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static void init_property(struct extcon_dev *edev, unsigned int id, int index)
+{
+	unsigned int type = extcon_info[id].type;
+	struct extcon_cable *cable = &edev->cables[index];
+
+	if (EXTCON_TYPE_USB & type)
+		memset(cable->usb_propval, 0, sizeof(cable->usb_propval));
+	if (EXTCON_TYPE_CHG & type)
+		memset(cable->chg_propval, 0, sizeof(cable->chg_propval));
+	if (EXTCON_TYPE_JACK & type)
+		memset(cable->jack_propval, 0, sizeof(cable->jack_propval));
+	if (EXTCON_TYPE_DISP & type)
+		memset(cable->disp_propval, 0, sizeof(cable->disp_propval));
 }
 
 static ssize_t state_show(struct device *dev, struct device_attribute *attr,
@@ -168,32 +373,13 @@ static ssize_t state_show(struct device *dev, struct device_attribute *attr,
 
 	for (i = 0; i < edev->max_supported; i++) {
 		count += sprintf(buf + count, "%s=%d\n",
-				extcon_name[edev->supported_cable[i]],
+				extcon_info[edev->supported_cable[i]].name,
 				 !!(edev->state & (1 << i)));
 	}
 
 	return count;
 }
-
-static ssize_t state_store(struct device *dev, struct device_attribute *attr,
-			   const char *buf, size_t count)
-{
-	u32 state;
-	ssize_t ret = 0;
-	struct extcon_dev *edev = dev_get_drvdata(dev);
-
-	ret = sscanf(buf, "0x%x", &state);
-	if (ret == 0)
-		ret = -EINVAL;
-	else
-		ret = extcon_set_state(edev, state);
-
-	if (ret < 0)
-		return ret;
-
-	return count;
-}
-static DEVICE_ATTR_RW(state);
+static DEVICE_ATTR_RO(state);
 
 static ssize_t name_show(struct device *dev, struct device_attribute *attr,
 		char *buf)
@@ -212,7 +398,7 @@ static ssize_t cable_name_show(struct device *dev,
 	int i = cable->cable_index;
 
 	return sprintf(buf, "%s\n",
-			extcon_name[cable->edev->supported_cable[i]]);
+			extcon_info[cable->edev->supported_cable[i]].name);
 }
 
 static ssize_t cable_state_show(struct device *dev,
@@ -224,26 +410,17 @@ static ssize_t cable_state_show(struct device *dev,
 	int i = cable->cable_index;
 
 	return sprintf(buf, "%d\n",
-		       extcon_get_cable_state_(cable->edev,
-					       cable->edev->supported_cable[i]));
+		extcon_get_state(cable->edev, cable->edev->supported_cable[i]));
 }
 
 /**
- * extcon_update_state() - Update the cable attach states of the extcon device
- *			   only for the masked bits.
- * @edev:	the extcon device
- * @mask:	the bit mask to designate updated bits.
- * @state:	new cable attach status for @edev
- *
- * Changing the state sends uevent with environment variable containing
- * the name of extcon device (envp[0]) and the state output (envp[1]).
- * Tizen uses this format for extcon device to get events from ports.
- * Android uses this format as well.
+ * extcon_sync()	- Synchronize the states for both the attached/detached
+ * @edev:		the extcon device that has the cable.
  *
- * Note that the notifier provides which bits are changed in the state
- * variable with the val parameter (second) to the callback.
+ * This function send a notification to synchronize the all states of a
+ * specific external connector
  */
-int extcon_update_state(struct extcon_dev *edev, u32 mask, u32 state)
+int extcon_sync(struct extcon_dev *edev, unsigned int id)
 {
 	char name_buf[120];
 	char state_buf[120];
@@ -252,100 +429,102 @@ int extcon_update_state(struct extcon_dev *edev, u32 mask, u32 state)
 	int env_offset = 0;
 	int length;
 	int index;
+	int state;
 	unsigned long flags;
-	bool attached;
 
 	if (!edev)
 		return -EINVAL;
 
-	spin_lock_irqsave(&edev->lock, flags);
+	index = find_cable_index_by_id(edev, id);
+	if (index < 0)
+		return index;
 
-	if (edev->state != ((edev->state & ~mask) | (state & mask))) {
-		u32 old_state;
+	spin_lock_irqsave(&edev->lock, flags);
 
-		if (check_mutually_exclusive(edev, (edev->state & ~mask) |
-						   (state & mask))) {
-			spin_unlock_irqrestore(&edev->lock, flags);
-			return -EPERM;
-		}
+	state = !!(edev->state & BIT(index));
+	raw_notifier_call_chain(&edev->nh[index], state, edev);
 
-		old_state = edev->state;
-		edev->state &= ~mask;
-		edev->state |= state & mask;
+	/* This could be in interrupt handler */
+	prop_buf = (char *)get_zeroed_page(GFP_ATOMIC);
+	if (!prop_buf) {
+		/* Unlock early before uevent */
+		spin_unlock_irqrestore(&edev->lock, flags);
 
-		for (index = 0; index < edev->max_supported; index++) {
-			if (is_extcon_changed(old_state, edev->state, index,
-					      &attached))
-				raw_notifier_call_chain(&edev->nh[index],
-							attached, edev);
-		}
+		dev_err(&edev->dev, "out of memory in extcon_set_state\n");
+		kobject_uevent(&edev->dev.kobj, KOBJ_CHANGE);
 
-		/* This could be in interrupt handler */
-		prop_buf = (char *)get_zeroed_page(GFP_ATOMIC);
-		if (prop_buf) {
-			length = name_show(&edev->dev, NULL, prop_buf);
-			if (length > 0) {
-				if (prop_buf[length - 1] == '\n')
-					prop_buf[length - 1] = 0;
-				snprintf(name_buf, sizeof(name_buf),
-					"NAME=%s", prop_buf);
-				envp[env_offset++] = name_buf;
-			}
-			length = state_show(&edev->dev, NULL, prop_buf);
-			if (length > 0) {
-				if (prop_buf[length - 1] == '\n')
-					prop_buf[length - 1] = 0;
-				snprintf(state_buf, sizeof(state_buf),
-					"STATE=%s", prop_buf);
-				envp[env_offset++] = state_buf;
-			}
-			envp[env_offset] = NULL;
-			/* Unlock early before uevent */
-			spin_unlock_irqrestore(&edev->lock, flags);
+		return 0;
+	}
 
-			kobject_uevent_env(&edev->dev.kobj, KOBJ_CHANGE, envp);
-			free_page((unsigned long)prop_buf);
-		} else {
-			/* Unlock early before uevent */
-			spin_unlock_irqrestore(&edev->lock, flags);
+	length = name_show(&edev->dev, NULL, prop_buf);
+	if (length > 0) {
+		if (prop_buf[length - 1] == '\n')
+			prop_buf[length - 1] = 0;
+		snprintf(name_buf, sizeof(name_buf), "NAME=%s", prop_buf);
+		envp[env_offset++] = name_buf;
+	}
 
-			dev_err(&edev->dev, "out of memory in extcon_set_state\n");
-			kobject_uevent(&edev->dev.kobj, KOBJ_CHANGE);
-		}
-	} else {
-		/* No changes */
-		spin_unlock_irqrestore(&edev->lock, flags);
+	length = state_show(&edev->dev, NULL, prop_buf);
+	if (length > 0) {
+		if (prop_buf[length - 1] == '\n')
+			prop_buf[length - 1] = 0;
+		snprintf(state_buf, sizeof(state_buf), "STATE=%s", prop_buf);
+		envp[env_offset++] = state_buf;
 	}
+	envp[env_offset] = NULL;
+
+	/* Unlock early before uevent */
+	spin_unlock_irqrestore(&edev->lock, flags);
+	kobject_uevent_env(&edev->dev.kobj, KOBJ_CHANGE, envp);
+	free_page((unsigned long)prop_buf);
 
 	return 0;
 }
-EXPORT_SYMBOL_GPL(extcon_update_state);
+EXPORT_SYMBOL_GPL(extcon_sync);
 
 /**
- * extcon_set_state() - Set the cable attach states of the extcon device.
- * @edev:	the extcon device
- * @state:	new cable attach status for @edev
- *
- * Note that notifier provides which bits are changed in the state
- * variable with the val parameter (second) to the callback.
+ * extcon_get_state() - Get the state of a external connector.
+ * @edev:	the extcon device that has the cable.
+ * @id:		the unique id of each external connector in extcon enumeration.
  */
-int extcon_set_state(struct extcon_dev *edev, u32 state)
+int extcon_get_state(struct extcon_dev *edev, const unsigned int id)
 {
+	int index, state;
+	unsigned long flags;
+
 	if (!edev)
 		return -EINVAL;
 
-	return extcon_update_state(edev, 0xffffffff, state);
+	index = find_cable_index_by_id(edev, id);
+	if (index < 0)
+		return index;
+
+	spin_lock_irqsave(&edev->lock, flags);
+	state = is_extcon_attached(edev, index);
+	spin_unlock_irqrestore(&edev->lock, flags);
+
+	return state;
 }
-EXPORT_SYMBOL_GPL(extcon_set_state);
+EXPORT_SYMBOL_GPL(extcon_get_state);
 
 /**
- * extcon_get_cable_state_() - Get the status of a specific cable.
- * @edev:	the extcon device that has the cable.
- * @id:		the unique id of each external connector in extcon enumeration.
+ * extcon_set_state() - Set the state of a external connector.
+ *			without a notification.
+ * @edev:		the extcon device that has the cable.
+ * @id:			the unique id of each external connector
+ *			in extcon enumeration.
+ * @state:		the new cable status. The default semantics is
+ *			true: attached / false: detached.
+ *
+ * This function only set the state of a external connector without
+ * a notification. To synchronize the data of a external connector,
+ * use extcon_set_state_sync() and extcon_sync().
  */
-int extcon_get_cable_state_(struct extcon_dev *edev, const unsigned int id)
+int extcon_set_state(struct extcon_dev *edev, unsigned int id,
+				bool cable_state)
 {
-	int index;
+	unsigned long flags;
+	int index, ret = 0;
 
 	if (!edev)
 		return -EINVAL;
@@ -354,41 +533,338 @@ int extcon_get_cable_state_(struct extcon_dev *edev, const unsigned int id)
 	if (index < 0)
 		return index;
 
-	if (edev->max_supported && edev->max_supported <= index)
-		return -EINVAL;
+	spin_lock_irqsave(&edev->lock, flags);
+
+	/* Check whether the external connector's state is changed. */
+	if (!is_extcon_changed(edev, index, cable_state))
+		goto out;
+
+	if (check_mutually_exclusive(edev,
+		(edev->state & ~BIT(index)) | (cable_state & BIT(index)))) {
+		ret = -EPERM;
+		goto out;
+	}
+
+	/*
+	 * Initialize the value of extcon property before setting
+	 * the detached state for an external connector.
+	 */
+	if (!cable_state)
+		init_property(edev, id, index);
+
+	/* Update the state for a external connector. */
+	if (cable_state)
+		edev->state |= BIT(index);
+	else
+		edev->state &= ~(BIT(index));
+out:
+	spin_unlock_irqrestore(&edev->lock, flags);
 
-	return !!(edev->state & (1 << index));
+	return ret;
 }
-EXPORT_SYMBOL_GPL(extcon_get_cable_state_);
+EXPORT_SYMBOL_GPL(extcon_set_state);
 
 /**
- * extcon_set_cable_state_() - Set the status of a specific cable.
+ * extcon_set_state_sync() - Set the state of a external connector
+ *			with a notification.
  * @edev:		the extcon device that has the cable.
  * @id:			the unique id of each external connector
  *			in extcon enumeration.
  * @state:		the new cable status. The default semantics is
  *			true: attached / false: detached.
+ *
+ * This function set the state of external connector and synchronize the data
+ * by usning a notification.
  */
-int extcon_set_cable_state_(struct extcon_dev *edev, unsigned int id,
+int extcon_set_state_sync(struct extcon_dev *edev, unsigned int id,
 				bool cable_state)
 {
-	u32 state;
+	int ret, index;
+	unsigned long flags;
+
+	index = find_cable_index_by_id(edev, id);
+	if (index < 0)
+		return index;
+
+	/* Check whether the external connector's state is changed. */
+	spin_lock_irqsave(&edev->lock, flags);
+	ret = is_extcon_changed(edev, index, cable_state);
+	spin_unlock_irqrestore(&edev->lock, flags);
+	if (!ret)
+		return 0;
+
+	ret = extcon_set_state(edev, id, cable_state);
+	if (ret < 0)
+		return ret;
+
+	return extcon_sync(edev, id);
+}
+EXPORT_SYMBOL_GPL(extcon_set_state_sync);
+
+/**
+ * extcon_get_property() - Get the property value of a specific cable.
+ * @edev:		the extcon device that has the cable.
+ * @id:			the unique id of each external connector
+ *			in extcon enumeration.
+ * @prop:		the property id among enum extcon_property.
+ * @prop_val:		the pointer which store the value of property.
+ *
+ * When getting the property value of external connector, the external connector
+ * should be attached. If detached state, function just return 0 without
+ * property value. Also, the each property should be included in the list of
+ * supported properties according to the type of external connectors.
+ *
+ * Returns 0 if success or error number if fail
+ */
+int extcon_get_property(struct extcon_dev *edev, unsigned int id,
+				unsigned int prop,
+				union extcon_property_value *prop_val)
+{
+	struct extcon_cable *cable;
+	unsigned long flags;
+	int index, ret = 0;
+
+	*prop_val = (union extcon_property_value)(0);
+
+	if (!edev)
+		return -EINVAL;
+
+	/* Check whether the property is supported or not */
+	if (!is_extcon_property_supported(id, prop))
+		return -EINVAL;
+
+	/* Find the cable index of external connector by using id */
+	index = find_cable_index_by_id(edev, id);
+	if (index < 0)
+		return index;
+
+	spin_lock_irqsave(&edev->lock, flags);
+
+	/* Check whether the property is available or not. */
+	if (!is_extcon_property_capability(edev, id, index, prop)) {
+		spin_unlock_irqrestore(&edev->lock, flags);
+		return -EPERM;
+	}
+
+	/*
+	 * Check whether the external connector is attached.
+	 * If external connector is detached, the user can not
+	 * get the property value.
+	 */
+	if (!is_extcon_attached(edev, index)) {
+		spin_unlock_irqrestore(&edev->lock, flags);
+		return 0;
+	}
+
+	cable = &edev->cables[index];
+
+	/* Get the property value according to extcon type */
+	switch (prop) {
+	case EXTCON_PROP_USB_MIN ... EXTCON_PROP_USB_MAX:
+		*prop_val = cable->usb_propval[prop - EXTCON_PROP_USB_MIN];
+		break;
+	case EXTCON_PROP_CHG_MIN ... EXTCON_PROP_CHG_MAX:
+		*prop_val = cable->chg_propval[prop - EXTCON_PROP_CHG_MIN];
+		break;
+	case EXTCON_PROP_JACK_MIN ... EXTCON_PROP_JACK_MAX:
+		*prop_val = cable->jack_propval[prop - EXTCON_PROP_JACK_MIN];
+		break;
+	case EXTCON_PROP_DISP_MIN ... EXTCON_PROP_DISP_MAX:
+		*prop_val = cable->disp_propval[prop - EXTCON_PROP_DISP_MIN];
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	spin_unlock_irqrestore(&edev->lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(extcon_get_property);
+
+/**
+ * extcon_set_property() - Set the property value of a specific cable.
+ * @edev:		the extcon device that has the cable.
+ * @id:			the unique id of each external connector
+ *			in extcon enumeration.
+ * @prop:		the property id among enum extcon_property.
+ * @prop_val:		the pointer including the new value of property.
+ *
+ * The each property should be included in the list of supported properties
+ * according to the type of external connectors.
+ *
+ * Returns 0 if success or error number if fail
+ */
+int extcon_set_property(struct extcon_dev *edev, unsigned int id,
+				unsigned int prop,
+				union extcon_property_value prop_val)
+{
+	struct extcon_cable *cable;
+	unsigned long flags;
+	int index, ret = 0;
+
+	if (!edev)
+		return -EINVAL;
+
+	/* Check whether the property is supported or not */
+	if (!is_extcon_property_supported(id, prop))
+		return -EINVAL;
+
+	/* Find the cable index of external connector by using id */
+	index = find_cable_index_by_id(edev, id);
+	if (index < 0)
+		return index;
+
+	spin_lock_irqsave(&edev->lock, flags);
+
+	/* Check whether the property is available or not. */
+	if (!is_extcon_property_capability(edev, id, index, prop)) {
+		spin_unlock_irqrestore(&edev->lock, flags);
+		return -EPERM;
+	}
+
+	cable = &edev->cables[index];
+
+	/* Set the property value according to extcon type */
+	switch (prop) {
+	case EXTCON_PROP_USB_MIN ... EXTCON_PROP_USB_MAX:
+		cable->usb_propval[prop - EXTCON_PROP_USB_MIN] = prop_val;
+		break;
+	case EXTCON_PROP_CHG_MIN ... EXTCON_PROP_CHG_MAX:
+		cable->chg_propval[prop - EXTCON_PROP_CHG_MIN] = prop_val;
+		break;
+	case EXTCON_PROP_JACK_MIN ... EXTCON_PROP_JACK_MAX:
+		cable->jack_propval[prop - EXTCON_PROP_JACK_MIN] = prop_val;
+		break;
+	case EXTCON_PROP_DISP_MIN ... EXTCON_PROP_DISP_MAX:
+		cable->disp_propval[prop - EXTCON_PROP_DISP_MIN] = prop_val;
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	spin_unlock_irqrestore(&edev->lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(extcon_set_property);
+
+/**
+ * extcon_set_property_sync() - Set the property value of a specific cable
+			with a notification.
+ * @prop_val:		the pointer including the new value of property.
+ *
+ * When setting the property value of external connector, the external connector
+ * should be attached. The each property should be included in the list of
+ * supported properties according to the type of external connectors.
+ *
+ * Returns 0 if success or error number if fail
+ */
+int extcon_set_property_sync(struct extcon_dev *edev, unsigned int id,
+				unsigned int prop,
+				union extcon_property_value prop_val)
+{
+	int ret;
+
+	ret = extcon_set_property(edev, id, prop, prop_val);
+	if (ret < 0)
+		return ret;
+
+	return extcon_sync(edev, id);
+}
+EXPORT_SYMBOL_GPL(extcon_set_property_sync);
+
+/**
+ * extcon_get_property_capability() - Get the capability of property
+ *			of an external connector.
+ * @edev:		the extcon device that has the cable.
+ * @id:			the unique id of each external connector
+ *			in extcon enumeration.
+ * @prop:		the property id among enum extcon_property.
+ *
+ * Returns 1 if the property is available or 0 if not available.
+ */
+int extcon_get_property_capability(struct extcon_dev *edev, unsigned int id,
+					unsigned int prop)
+{
 	int index;
 
 	if (!edev)
 		return -EINVAL;
 
+	/* Check whether the property is supported or not */
+	if (!is_extcon_property_supported(id, prop))
+		return -EINVAL;
+
+	/* Find the cable index of external connector by using id */
 	index = find_cable_index_by_id(edev, id);
 	if (index < 0)
 		return index;
 
-	if (edev->max_supported && edev->max_supported <= index)
+	return is_extcon_property_capability(edev, id, index, prop);
+}
+EXPORT_SYMBOL_GPL(extcon_get_property_capability);
+
+/**
+ * extcon_set_property_capability() - Set the capability of a property
+ *			of an external connector.
+ * @edev:		the extcon device that has the cable.
+ * @id:			the unique id of each external connector
+ *			in extcon enumeration.
+ * @prop:		the property id among enum extcon_property.
+ *
+ * This function set the capability of a property for an external connector
+ * to mark the bit in capability bitmap which mean the available state of
+ * a property.
+ *
+ * Returns 0 if success or error number if fail
+ */
+int extcon_set_property_capability(struct extcon_dev *edev, unsigned int id,
+					unsigned int prop)
+{
+	struct extcon_cable *cable;
+	int index, type, ret = 0;
+
+	if (!edev)
 		return -EINVAL;
 
-	state = cable_state ? (1 << index) : 0;
-	return extcon_update_state(edev, 1 << index, state);
+	/* Check whether the property is supported or not. */
+	if (!is_extcon_property_supported(id, prop))
+		return -EINVAL;
+
+	/* Find the cable index of external connector by using id. */
+	index = find_cable_index_by_id(edev, id);
+	if (index < 0)
+		return index;
+
+	type = get_extcon_type(prop);
+	if (type < 0)
+		return type;
+
+	cable = &edev->cables[index];
+
+	switch (type) {
+	case EXTCON_TYPE_USB:
+		__set_bit(prop - EXTCON_PROP_USB_MIN, cable->usb_bits);
+		break;
+	case EXTCON_TYPE_CHG:
+		__set_bit(prop - EXTCON_PROP_CHG_MIN, cable->chg_bits);
+		break;
+	case EXTCON_TYPE_JACK:
+		__set_bit(prop - EXTCON_PROP_JACK_MIN, cable->jack_bits);
+		break;
+	case EXTCON_TYPE_DISP:
+		__set_bit(prop - EXTCON_PROP_DISP_MIN, cable->disp_bits);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
 }
-EXPORT_SYMBOL_GPL(extcon_set_cable_state_);
+EXPORT_SYMBOL_GPL(extcon_set_property_capability);
 
 /**
  * extcon_get_extcon_dev() - Get the extcon device instance from the name
@@ -428,7 +904,7 @@ int extcon_register_notifier(struct extcon_dev *edev, unsigned int id,
 			     struct notifier_block *nb)
 {
 	unsigned long flags;
-	int ret, idx;
+	int ret, idx = -EINVAL;
 
 	if (!nb)
 		return -EINVAL;
@@ -846,13 +1322,13 @@ struct extcon_dev *extcon_get_edev_by_phandle(struct device *dev, int index)
 		return ERR_PTR(-EINVAL);
 
 	if (!dev->of_node) {
-		dev_err(dev, "device does not have a device node entry\n");
+		dev_dbg(dev, "device does not have a device node entry\n");
 		return ERR_PTR(-EINVAL);
 	}
 
 	node = of_parse_phandle(dev->of_node, "extcon", index);
 	if (!node) {
-		dev_err(dev, "failed to get phandle in %s node\n",
+		dev_dbg(dev, "failed to get phandle in %s node\n",
 			dev->of_node->full_name);
 		return ERR_PTR(-ENODEV);
 	}

drivers/media/dvb-frontends/rtl2832_sdr.c

@@ -392,7 +392,6 @@ static int rtl2832_sdr_alloc_urbs(struct rtl2832_sdr_dev *dev)
 		dev_dbg(&pdev->dev, "alloc urb=%d\n", i);
 		dev->urb_list[i] = usb_alloc_urb(0, GFP_ATOMIC);
 		if (!dev->urb_list[i]) {
-			dev_dbg(&pdev->dev, "failed\n");
 			for (j = 0; j < i; j++)
 				usb_free_urb(dev->urb_list[j]);
 			return -ENOMEM;

drivers/media/radio/si470x/radio-si470x-usb.c

@@ -627,7 +627,6 @@ static int si470x_usb_driver_probe(struct usb_interface *intf,
 
 	radio->int_in_urb = usb_alloc_urb(0, GFP_KERNEL);
 	if (!radio->int_in_urb) {
-		dev_info(&intf->dev, "could not allocate int_in_urb");
 		retval = -ENOMEM;
 		goto err_intbuffer;
 	}

drivers/media/rc/imon.c

@@ -2211,16 +2211,11 @@ static struct imon_context *imon_init_intf0(struct usb_interface *intf,
 		goto exit;
 	}
 	rx_urb = usb_alloc_urb(0, GFP_KERNEL);
-	if (!rx_urb) {
-		dev_err(dev, "%s: usb_alloc_urb failed for IR urb", __func__);
+	if (!rx_urb)
 		goto rx_urb_alloc_failed;
-	}
 	tx_urb = usb_alloc_urb(0, GFP_KERNEL);
-	if (!tx_urb) {
-		dev_err(dev, "%s: usb_alloc_urb failed for display urb",
-			__func__);
+	if (!tx_urb)
 		goto tx_urb_alloc_failed;
-	}
 
 	mutex_init(&ictx->lock);
 	spin_lock_init(&ictx->kc_lock);
@@ -2305,10 +2300,8 @@ static struct imon_context *imon_init_intf1(struct usb_interface *intf,
 	int ret = -ENOMEM;
 
 	rx_urb = usb_alloc_urb(0, GFP_KERNEL);
-	if (!rx_urb) {
-		pr_err("usb_alloc_urb failed for IR urb\n");
+	if (!rx_urb)
 		goto rx_urb_alloc_failed;
-	}
 
 	mutex_lock(&ictx->lock);
 

drivers/media/rc/redrat3.c

@@ -970,10 +970,8 @@ static int redrat3_dev_probe(struct usb_interface *intf,
 
 	/* set up bulk-in endpoint */
 	rr3->read_urb = usb_alloc_urb(0, GFP_KERNEL);
-	if (!rr3->read_urb) {
-		dev_err(dev, "Read urb allocation failure\n");
+	if (!rr3->read_urb)
 		goto error;
-	}
 
 	rr3->ep_in = ep_in;
 	rr3->bulk_in_buf = usb_alloc_coherent(udev,

drivers/media/usb/airspy/airspy.c

@@ -426,7 +426,6 @@ static int airspy_alloc_urbs(struct airspy *s)
 		dev_dbg(s->dev, "alloc urb=%d\n", i);
 		s->urb_list[i] = usb_alloc_urb(0, GFP_ATOMIC);
 		if (!s->urb_list[i]) {
-			dev_dbg(s->dev, "failed\n");
 			for (j = 0; j < i; j++)
 				usb_free_urb(s->urb_list[j]);
 			return -ENOMEM;

drivers/media/usb/as102/as102_usb_drv.c

@@ -270,8 +270,6 @@ static int as102_alloc_usb_stream_buffer(struct as102_dev_t *dev)
 
 		urb = usb_alloc_urb(0, GFP_ATOMIC);
 		if (urb == NULL) {
-			dev_dbg(&dev->bus_adap.usb_dev->dev,
-				"%s: usb_alloc_urb failed\n", __func__);
 			as102_free_usb_stream_buffer(dev);
 			return -ENOMEM;
 		}

drivers/media/usb/au0828/au0828-video.c

@@ -245,7 +245,6 @@ static int au0828_init_isoc(struct au0828_dev *dev, int max_packets,
 	for (i = 0; i < dev->isoc_ctl.num_bufs; i++) {
 		urb = usb_alloc_urb(max_packets, GFP_KERNEL);
 		if (!urb) {
-			au0828_isocdbg("cannot alloc isoc_ctl.urb %i\n", i);
 			au0828_uninit_isoc(dev);
 			return -ENOMEM;
 		}

drivers/media/usb/cpia2/cpia2_usb.c

@@ -662,7 +662,6 @@ static int submit_urbs(struct camera_data *cam)
 		}
 		urb = usb_alloc_urb(FRAMES_PER_DESC, GFP_KERNEL);
 		if (!urb) {
-			ERR("%s: usb_alloc_urb error!\n", __func__);
 			for (j = 0; j < i; j++)
 				usb_free_urb(cam->sbuf[j].urb);
 			return -ENOMEM;

drivers/media/usb/cx231xx/cx231xx-audio.c

@@ -293,7 +293,6 @@ static int cx231xx_init_audio_isoc(struct cx231xx *dev)
 		memset(dev->adev.transfer_buffer[i], 0x80, sb_size);
 		urb = usb_alloc_urb(CX231XX_ISO_NUM_AUDIO_PACKETS, GFP_ATOMIC);
 		if (!urb) {
-			dev_err(dev->dev, "usb_alloc_urb failed!\n");
 			for (j = 0; j < i; j++) {
 				usb_free_urb(dev->adev.urb[j]);
 				kfree(dev->adev.transfer_buffer[j]);
@@ -355,7 +354,6 @@ static int cx231xx_init_audio_bulk(struct cx231xx *dev)
 		memset(dev->adev.transfer_buffer[i], 0x80, sb_size);
 		urb = usb_alloc_urb(CX231XX_NUM_AUDIO_PACKETS, GFP_ATOMIC);
 		if (!urb) {
-			dev_err(dev->dev, "usb_alloc_urb failed!\n");
 			for (j = 0; j < i; j++) {
 				usb_free_urb(dev->adev.urb[j]);
 				kfree(dev->adev.transfer_buffer[j]);

drivers/media/usb/cx231xx/cx231xx-core.c

@@ -1035,8 +1035,6 @@ int cx231xx_init_isoc(struct cx231xx *dev, int max_packets,
 	for (i = 0; i < dev->video_mode.isoc_ctl.num_bufs; i++) {
 		urb = usb_alloc_urb(max_packets, GFP_KERNEL);
 		if (!urb) {
-			dev_err(dev->dev,
-				"cannot alloc isoc_ctl.urb %i\n", i);
 			cx231xx_uninit_isoc(dev);
 			return -ENOMEM;
 		}
@@ -1172,8 +1170,6 @@ int cx231xx_init_bulk(struct cx231xx *dev, int max_packets,
 	for (i = 0; i < dev->video_mode.bulk_ctl.num_bufs; i++) {
 		urb = usb_alloc_urb(0, GFP_KERNEL);
 		if (!urb) {
-			dev_err(dev->dev,
-				"cannot alloc bulk_ctl.urb %i\n", i);
 			cx231xx_uninit_bulk(dev);
 			return -ENOMEM;
 		}

drivers/media/usb/cx231xx/cx231xx-vbi.c

@@ -442,8 +442,6 @@ int cx231xx_init_vbi_isoc(struct cx231xx *dev, int max_packets,
 
 		urb = usb_alloc_urb(0, GFP_KERNEL);
 		if (!urb) {
-			dev_err(dev->dev,
-				"cannot alloc bulk_ctl.urb %i\n", i);
 			cx231xx_uninit_vbi_isoc(dev);
 			return -ENOMEM;
 		}

drivers/media/usb/dvb-usb/dib0700_core.c

@@ -783,10 +783,8 @@ int dib0700_rc_setup(struct dvb_usb_device *d, struct usb_interface *intf)
 	/* Starting in firmware 1.20, the RC info is provided on a bulk pipe */
 
 	purb = usb_alloc_urb(0, GFP_KERNEL);
-	if (purb == NULL) {
-		err("rc usb alloc urb failed");
+	if (purb == NULL)
 		return -ENOMEM;
-	}
 
 	purb->transfer_buffer = kzalloc(RC_MSG_SIZE_V1_20, GFP_KERNEL);
 	if (purb->transfer_buffer == NULL) {

drivers/media/usb/em28xx/em28xx-audio.c

@@ -850,7 +850,6 @@ static int em28xx_audio_urb_init(struct em28xx *dev)
 
 		urb = usb_alloc_urb(npackets, GFP_ATOMIC);
 		if (!urb) {
-			em28xx_errdev("usb_alloc_urb failed!\n");
 			em28xx_audio_free_urb(dev);
 			return -ENOMEM;
 		}

drivers/media/usb/em28xx/em28xx-core.c

@@ -934,7 +934,6 @@ int em28xx_alloc_urbs(struct em28xx *dev, enum em28xx_mode mode, int xfer_bulk,
 	for (i = 0; i < usb_bufs->num_bufs; i++) {
 		urb = usb_alloc_urb(usb_bufs->num_packets, GFP_KERNEL);
 		if (!urb) {
-			em28xx_err("cannot alloc usb_ctl.urb %i\n", i);
 			em28xx_uninit_usb_xfer(dev, mode);
 			return -ENOMEM;
 		}

drivers/media/usb/gspca/benq.c

@@ -95,10 +95,8 @@ static int sd_start(struct gspca_dev *gspca_dev)
 #define SD_NPKT 32
 	for (n = 0; n < 4; n++) {
 		urb = usb_alloc_urb(SD_NPKT, GFP_KERNEL);
-		if (!urb) {
-			pr_err("usb_alloc_urb failed\n");
+		if (!urb)
 			return -ENOMEM;
-		}
 		gspca_dev->urb[n] = urb;
 		urb->transfer_buffer = usb_alloc_coherent(gspca_dev->dev,
 						SD_PKT_SZ * SD_NPKT,

drivers/media/usb/gspca/gspca.c

@@ -795,10 +795,8 @@ static int create_urbs(struct gspca_dev *gspca_dev,
 
 	for (n = 0; n < nurbs; n++) {
 		urb = usb_alloc_urb(npkt, GFP_KERNEL);
-		if (!urb) {
-			pr_err("usb_alloc_urb failed\n");
+		if (!urb)
 			return -ENOMEM;
-		}
 		gspca_dev->urb[n] = urb;
 		urb->transfer_buffer = usb_alloc_coherent(gspca_dev->dev,
 						bsize,

drivers/media/usb/gspca/konica.c

@@ -208,10 +208,8 @@ static int sd_start(struct gspca_dev *gspca_dev)
 		packet_size =
 			le16_to_cpu(alt->endpoint[i].desc.wMaxPacketSize);
 		urb = usb_alloc_urb(SD_NPKT, GFP_KERNEL);
-		if (!urb) {
-			pr_err("usb_alloc_urb failed\n");
+		if (!urb)
 			return -ENOMEM;
-		}
 		gspca_dev->urb[n] = urb;
 		urb->transfer_buffer = usb_alloc_coherent(gspca_dev->dev,
 						packet_size * SD_NPKT,

drivers/media/usb/hackrf/hackrf.c

@@ -691,7 +691,6 @@ static int hackrf_alloc_urbs(struct hackrf_dev *dev, bool rcv)
 		dev_dbg(dev->dev, "alloc urb=%d\n", i);
 		dev->urb_list[i] = usb_alloc_urb(0, GFP_ATOMIC);
 		if (!dev->urb_list[i]) {
-			dev_dbg(dev->dev, "failed\n");
 			for (j = 0; j < i; j++)
 				usb_free_urb(dev->urb_list[j]);
 			return -ENOMEM;

drivers/media/usb/hdpvr/hdpvr-video.c

@@ -155,10 +155,8 @@ int hdpvr_alloc_buffers(struct hdpvr_device *dev, uint count)
 		buf->dev = dev;
 
 		urb = usb_alloc_urb(0, GFP_KERNEL);
-		if (!urb) {
-			v4l2_err(&dev->v4l2_dev, "cannot allocate urb\n");
+		if (!urb)
 			goto exit_urb;
-		}
 		buf->urb = urb;
 
 		mem = usb_alloc_coherent(dev->udev, dev->bulk_in_size, GFP_KERNEL,

drivers/media/usb/msi2500/msi2500.c

@@ -509,7 +509,6 @@ static int msi2500_isoc_init(struct msi2500_dev *dev)
 	for (i = 0; i < MAX_ISO_BUFS; i++) {
 		urb = usb_alloc_urb(ISO_FRAMES_PER_DESC, GFP_KERNEL);
 		if (urb == NULL) {
-			dev_err(dev->dev, "Failed to allocate urb %d\n", i);
 			msi2500_isoc_cleanup(dev);
 			return -ENOMEM;
 		}

drivers/media/usb/pwc/pwc-if.c

@@ -410,7 +410,6 @@ retry:
 	for (i = 0; i < MAX_ISO_BUFS; i++) {
 		urb = usb_alloc_urb(ISO_FRAMES_PER_DESC, GFP_KERNEL);
 		if (urb == NULL) {
-			PWC_ERROR("Failed to allocate urb %d\n", i);
 			pwc_isoc_cleanup(pdev);
 			return -ENOMEM;
 		}

drivers/media/usb/s2255/s2255drv.c

@@ -2113,11 +2113,8 @@ static int s2255_start_readpipe(struct s2255_dev *dev)
 	pipe_info->state = 1;
 	pipe_info->err_count = 0;
 	pipe_info->stream_urb = usb_alloc_urb(0, GFP_KERNEL);
-	if (!pipe_info->stream_urb) {
-		dev_err(&dev->udev->dev,
-			"ReadStream: Unable to alloc URB\n");
+	if (!pipe_info->stream_urb)
 		return -ENOMEM;
-	}
 	/* transfer buffer allocated in board_init */
 	usb_fill_bulk_urb(pipe_info->stream_urb, dev->udev,
 			  pipe,
@@ -2290,10 +2287,8 @@ static int s2255_probe(struct usb_interface *interface,
 	}
 
 	dev->fw_data->fw_urb = usb_alloc_urb(0, GFP_KERNEL);
-	if (!dev->fw_data->fw_urb) {
-		dev_err(&interface->dev, "out of memory!\n");
+	if (!dev->fw_data->fw_urb)
 		goto errorFWURB;
-	}
 
 	dev->fw_data->pfw_data = kzalloc(CHUNK_SIZE, GFP_KERNEL);
 	if (!dev->fw_data->pfw_data) {

drivers/media/usb/stk1160/stk1160-video.c

@@ -457,10 +457,8 @@ int stk1160_alloc_isoc(struct stk1160 *dev)
 	for (i = 0; i < num_bufs; i++) {
 
 		urb = usb_alloc_urb(max_packets, GFP_KERNEL);
-		if (!urb) {
-			stk1160_err("cannot alloc urb[%d]\n", i);
+		if (!urb)
 			goto free_i_bufs;
-		}
 		dev->isoc_ctl.urb[i] = urb;
 
 #ifndef CONFIG_DMA_NONCOHERENT

drivers/media/usb/stkwebcam/stk-webcam.c

@@ -452,10 +452,8 @@ static int stk_prepare_iso(struct stk_camera *dev)
 			STK_ERROR("isobuf data already allocated\n");
 		if (dev->isobufs[i].urb == NULL) {
 			urb = usb_alloc_urb(ISO_FRAMES_PER_DESC, GFP_KERNEL);
-			if (urb == NULL) {
-				STK_ERROR("Failed to allocate URB %d\n", i);
+			if (urb == NULL)
 				goto isobufs_out;
-			}
 			dev->isobufs[i].urb = urb;
 		} else {
 			STK_ERROR("Killing URB\n");

drivers/media/usb/tm6000/tm6000-dvb.c

@@ -129,10 +129,8 @@ static int tm6000_start_stream(struct tm6000_core *dev)
 	}
 
 	dvb->bulk_urb = usb_alloc_urb(0, GFP_KERNEL);
-	if (dvb->bulk_urb == NULL) {
-		printk(KERN_ERR "tm6000: couldn't allocate urb\n");
+	if (dvb->bulk_urb == NULL)
 		return -ENOMEM;
-	}
 
 	pipe = usb_rcvbulkpipe(dev->udev, dev->bulk_in.endp->desc.bEndpointAddress
 							  & USB_ENDPOINT_NUMBER_MASK);

drivers/media/usb/tm6000/tm6000-video.c

@@ -635,7 +635,6 @@ static int tm6000_prepare_isoc(struct tm6000_core *dev)
 	for (i = 0; i < dev->isoc_ctl.num_bufs; i++) {
 		urb = usb_alloc_urb(max_packets, GFP_KERNEL);
 		if (!urb) {
-			tm6000_err("cannot alloc isoc_ctl.urb %i\n", i);
 			tm6000_uninit_isoc(dev);
 			usb_free_urb(urb);
 			return -ENOMEM;

drivers/media/usb/usbvision/usbvision-core.c

@@ -2303,11 +2303,8 @@ int usbvision_init_isoc(struct usb_usbvision *usbvision)
 		struct urb *urb;
 
 		urb = usb_alloc_urb(USBVISION_URB_FRAMES, GFP_KERNEL);
-		if (urb == NULL) {
-			dev_err(&usbvision->dev->dev,
-				"%s: usb_alloc_urb() failed\n", __func__);
+		if (urb == NULL)
 			return -ENOMEM;
-		}
 		usbvision->sbuf[buf_idx].urb = urb;
 		usbvision->sbuf[buf_idx].data =
 			usb_alloc_coherent(usbvision->dev,

drivers/media/usb/zr364xx/zr364xx.c

@@ -1045,10 +1045,8 @@ static int zr364xx_start_readpipe(struct zr364xx_camera *cam)
 	pipe_info->state = 1;
 	pipe_info->err_count = 0;
 	pipe_info->stream_urb = usb_alloc_urb(0, GFP_KERNEL);
-	if (!pipe_info->stream_urb) {
-		dev_err(&cam->udev->dev, "ReadStream: Unable to alloc URB\n");
+	if (!pipe_info->stream_urb)
 		return -ENOMEM;
-	}
 	/* transfer buffer allocated in board_init */
 	usb_fill_bulk_urb(pipe_info->stream_urb, cam->udev,
 			  pipe,

drivers/mmc/host/vub300.c

@@ -2116,13 +2116,11 @@ static int vub300_probe(struct usb_interface *interface,
 	command_out_urb = usb_alloc_urb(0, GFP_KERNEL);
 	if (!command_out_urb) {
 		retval = -ENOMEM;
-		dev_err(&udev->dev, "not enough memory for command_out_urb\n");
 		goto error0;
 	}
 	command_res_urb = usb_alloc_urb(0, GFP_KERNEL);
 	if (!command_res_urb) {
 		retval = -ENOMEM;
-		dev_err(&udev->dev, "not enough memory for command_res_urb\n");
 		goto error1;
 	}
 	/* this also allocates memory for our VUB300 mmc host device */

drivers/phy/Kconfig

@@ -24,6 +24,15 @@ config PHY_BCM_NS_USB2
 	  Enable this to support Broadcom USB 2.0 PHY connected to the USB
 	  controller on Northstar family.
 
+config PHY_BCM_NS_USB3
+	tristate "Broadcom Northstar USB 3.0 PHY Driver"
+	depends on ARCH_BCM_IPROC || COMPILE_TEST
+	depends on HAS_IOMEM && OF
+	select GENERIC_PHY
+	help
+	  Enable this to support Broadcom USB 3.0 PHY connected to the USB
+	  controller on Northstar family.
+
 config PHY_BERLIN_USB
 	tristate "Marvell Berlin USB PHY Driver"
 	depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF
@@ -258,7 +267,9 @@ config PHY_SUN4I_USB
 	depends on RESET_CONTROLLER
 	depends on EXTCON
 	depends on POWER_SUPPLY
+	depends on USB_SUPPORT
 	select GENERIC_PHY
+	select USB_COMMON
 	help
 	  Enable this to support the transceiver that is part of Allwinner
 	  sunxi SoCs.
@@ -358,6 +369,14 @@ config PHY_ROCKCHIP_USB
 	help
 	  Enable this to support the Rockchip USB 2.0 PHY.
 
+config PHY_ROCKCHIP_INNO_USB2
+	tristate "Rockchip INNO USB2PHY Driver"
+	depends on (ARCH_ROCKCHIP || COMPILE_TEST) && OF
+	depends on COMMON_CLK
+	select GENERIC_PHY
+	help
+	  Support for Rockchip USB2.0 PHY with Innosilicon IP block.
+
 config PHY_ROCKCHIP_EMMC
 	tristate "Rockchip EMMC PHY Driver"
 	depends on ARCH_ROCKCHIP && OF
@@ -372,6 +391,23 @@ config PHY_ROCKCHIP_DP
 	help
 	  Enable this to support the Rockchip Display Port PHY.
 
+config PHY_ROCKCHIP_PCIE
+	tristate "Rockchip PCIe PHY Driver"
+	depends on (ARCH_ROCKCHIP && OF) || COMPILE_TEST
+	select GENERIC_PHY
+	select MFD_SYSCON
+	help
+	  Enable this to support the Rockchip PCIe PHY.
+
+config PHY_ROCKCHIP_TYPEC
+	tristate "Rockchip TYPEC PHY Driver"
+	depends on OF && (ARCH_ROCKCHIP || COMPILE_TEST)
+	select EXTCON
+	select GENERIC_PHY
+	select RESET_CONTROLLER
+	help
+	  Enable this to support the Rockchip USB TYPEC PHY.
+
 config PHY_ST_SPEAR1310_MIPHY
 	tristate "ST SPEAR1310-MIPHY driver"
 	select GENERIC_PHY

drivers/phy/Makefile

@@ -4,6 +4,7 @@
 
 obj-$(CONFIG_GENERIC_PHY)		+= phy-core.o
 obj-$(CONFIG_PHY_BCM_NS_USB2)		+= phy-bcm-ns-usb2.o
+obj-$(CONFIG_PHY_BCM_NS_USB3)		+= phy-bcm-ns-usb3.o
 obj-$(CONFIG_PHY_BERLIN_USB)		+= phy-berlin-usb.o
 obj-$(CONFIG_PHY_BERLIN_SATA)		+= phy-berlin-sata.o
 obj-$(CONFIG_PHY_DA8XX_USB)		+= phy-da8xx-usb.o
@@ -39,8 +40,11 @@ phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2)	+= phy-s5pv210-usb2.o
 obj-$(CONFIG_PHY_EXYNOS5_USBDRD)	+= phy-exynos5-usbdrd.o
 obj-$(CONFIG_PHY_QCOM_APQ8064_SATA)	+= phy-qcom-apq8064-sata.o
 obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o
+obj-$(CONFIG_PHY_ROCKCHIP_INNO_USB2)	+= phy-rockchip-inno-usb2.o
 obj-$(CONFIG_PHY_ROCKCHIP_EMMC) += phy-rockchip-emmc.o
+obj-$(CONFIG_PHY_ROCKCHIP_PCIE) += phy-rockchip-pcie.o
 obj-$(CONFIG_PHY_ROCKCHIP_DP)		+= phy-rockchip-dp.o
+obj-$(CONFIG_PHY_ROCKCHIP_TYPEC) += phy-rockchip-typec.o
 obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA)	+= phy-qcom-ipq806x-sata.o
 obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY)	+= phy-spear1310-miphy.o
 obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY)	+= phy-spear1340-miphy.o

drivers/phy/phy-bcm-ns-usb3.c

@@ -0,0 +1,274 @@
+/*
+ * Broadcom Northstar USB 3.0 PHY Driver
+ *
+ * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
+ *
+ * All magic values used for initialization (and related comments) were obtained
+ * from Broadcom's SDK:
+ * Copyright (c) Broadcom Corp, 2012
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/bcma/bcma.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/phy/phy.h>
+#include <linux/slab.h>
+
+#define BCM_NS_USB3_MII_MNG_TIMEOUT_US	1000	/* usecs */
+
+enum bcm_ns_family {
+	BCM_NS_UNKNOWN,
+	BCM_NS_AX,
+	BCM_NS_BX,
+};
+
+struct bcm_ns_usb3 {
+	struct device *dev;
+	enum bcm_ns_family family;
+	void __iomem *dmp;
+	void __iomem *ccb_mii;
+	struct phy *phy;
+};
+
+static const struct of_device_id bcm_ns_usb3_id_table[] = {
+	{
+		.compatible = "brcm,ns-ax-usb3-phy",
+		.data = (int *)BCM_NS_AX,
+	},
+	{
+		.compatible = "brcm,ns-bx-usb3-phy",
+		.data = (int *)BCM_NS_BX,
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, bcm_ns_usb3_id_table);
+
+static int bcm_ns_usb3_wait_reg(struct bcm_ns_usb3 *usb3, void __iomem *addr,
+				u32 mask, u32 value, unsigned long timeout)
+{
+	unsigned long deadline = jiffies + timeout;
+	u32 val;
+
+	do {
+		val = readl(addr);
+		if ((val & mask) == value)
+			return 0;
+		cpu_relax();
+		udelay(10);
+	} while (!time_after_eq(jiffies, deadline));
+
+	dev_err(usb3->dev, "Timeout waiting for register %p\n", addr);
+
+	return -EBUSY;
+}
+
+static inline int bcm_ns_usb3_mii_mng_wait_idle(struct bcm_ns_usb3 *usb3)
+{
+	return bcm_ns_usb3_wait_reg(usb3, usb3->ccb_mii + BCMA_CCB_MII_MNG_CTL,
+				    0x0100, 0x0000,
+				    usecs_to_jiffies(BCM_NS_USB3_MII_MNG_TIMEOUT_US));
+}
+
+static int bcm_ns_usb3_mii_mng_write32(struct bcm_ns_usb3 *usb3, u32 value)
+{
+	int err;
+
+	err = bcm_ns_usb3_mii_mng_wait_idle(usb3);
+	if (err < 0) {
+		dev_err(usb3->dev, "Couldn't write 0x%08x value\n", value);
+		return err;
+	}
+
+	writel(value, usb3->ccb_mii + BCMA_CCB_MII_MNG_CMD_DATA);
+
+	return 0;
+}
+
+static int bcm_ns_usb3_phy_init_ns_bx(struct bcm_ns_usb3 *usb3)
+{
+	int err;
+
+	/* Enable MDIO. Setting MDCDIV as 26  */
+	writel(0x0000009a, usb3->ccb_mii + BCMA_CCB_MII_MNG_CTL);
+
+	/* Wait for MDIO? */
+	udelay(2);
+
+	/* USB3 PLL Block */
+	err = bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8000);
+	if (err < 0)
+		return err;
+
+	/* Assert Ana_Pllseq start */
+	bcm_ns_usb3_mii_mng_write32(usb3, 0x58061000);
+
+	/* Assert CML Divider ratio to 26 */
+	bcm_ns_usb3_mii_mng_write32(usb3, 0x582a6400);
+
+	/* Asserting PLL Reset */
+	bcm_ns_usb3_mii_mng_write32(usb3, 0x582ec000);
+
+	/* Deaaserting PLL Reset */
+	bcm_ns_usb3_mii_mng_write32(usb3, 0x582e8000);
+
+	/* Waiting MII Mgt interface idle */
+	bcm_ns_usb3_mii_mng_wait_idle(usb3);
+
+	/* Deasserting USB3 system reset */
+	writel(0, usb3->dmp + BCMA_RESET_CTL);
+
+	/* PLL frequency monitor enable */
+	bcm_ns_usb3_mii_mng_write32(usb3, 0x58069000);
+
+	/* PIPE Block */
+	bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8060);
+
+	/* CMPMAX & CMPMINTH setting */
+	bcm_ns_usb3_mii_mng_write32(usb3, 0x580af30d);
+
+	/* DEGLITCH MIN & MAX setting */
+	bcm_ns_usb3_mii_mng_write32(usb3, 0x580e6302);
+
+	/* TXPMD block */
+	bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8040);
+
+	/* Enabling SSC */
+	bcm_ns_usb3_mii_mng_write32(usb3, 0x58061003);
+
+	/* Waiting MII Mgt interface idle */
+	bcm_ns_usb3_mii_mng_wait_idle(usb3);
+
+	return 0;
+}
+
+static int bcm_ns_usb3_phy_init_ns_ax(struct bcm_ns_usb3 *usb3)
+{
+	int err;
+
+	/* Enable MDIO. Setting MDCDIV as 26  */
+	writel(0x0000009a, usb3->ccb_mii + BCMA_CCB_MII_MNG_CTL);
+
+	/* Wait for MDIO? */
+	udelay(2);
+
+	/* PLL30 block */
+	err = bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8000);
+	if (err < 0)
+		return err;
+
+	bcm_ns_usb3_mii_mng_write32(usb3, 0x582a6400);
+
+	bcm_ns_usb3_mii_mng_write32(usb3, 0x587e80e0);
+
+	bcm_ns_usb3_mii_mng_write32(usb3, 0x580a009c);
+
+	/* Enable SSC */
+	bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8040);
+
+	bcm_ns_usb3_mii_mng_write32(usb3, 0x580a21d3);
+
+	bcm_ns_usb3_mii_mng_write32(usb3, 0x58061003);
+
+	/* Waiting MII Mgt interface idle */
+	bcm_ns_usb3_mii_mng_wait_idle(usb3);
+
+	/* Deasserting USB3 system reset */
+	writel(0, usb3->dmp + BCMA_RESET_CTL);
+
+	return 0;
+}
+
+static int bcm_ns_usb3_phy_init(struct phy *phy)
+{
+	struct bcm_ns_usb3 *usb3 = phy_get_drvdata(phy);
+	int err;
+
+	/* Perform USB3 system soft reset */
+	writel(BCMA_RESET_CTL_RESET, usb3->dmp + BCMA_RESET_CTL);
+
+	switch (usb3->family) {
+	case BCM_NS_AX:
+		err = bcm_ns_usb3_phy_init_ns_ax(usb3);
+		break;
+	case BCM_NS_BX:
+		err = bcm_ns_usb3_phy_init_ns_bx(usb3);
+		break;
+	default:
+		WARN_ON(1);
+		err = -ENOTSUPP;
+	}
+
+	return err;
+}
+
+static const struct phy_ops ops = {
+	.init		= bcm_ns_usb3_phy_init,
+	.owner		= THIS_MODULE,
+};
+
+static int bcm_ns_usb3_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	const struct of_device_id *of_id;
+	struct bcm_ns_usb3 *usb3;
+	struct resource *res;
+	struct phy_provider *phy_provider;
+
+	usb3 = devm_kzalloc(dev, sizeof(*usb3), GFP_KERNEL);
+	if (!usb3)
+		return -ENOMEM;
+
+	usb3->dev = dev;
+
+	of_id = of_match_device(bcm_ns_usb3_id_table, dev);
+	if (!of_id)
+		return -EINVAL;
+	usb3->family = (enum bcm_ns_family)of_id->data;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dmp");
+	usb3->dmp = devm_ioremap_resource(dev, res);
+	if (IS_ERR(usb3->dmp)) {
+		dev_err(dev, "Failed to map DMP regs\n");
+		return PTR_ERR(usb3->dmp);
+	}
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ccb-mii");
+	usb3->ccb_mii = devm_ioremap_resource(dev, res);
+	if (IS_ERR(usb3->ccb_mii)) {
+		dev_err(dev, "Failed to map ChipCommon B MII regs\n");
+		return PTR_ERR(usb3->ccb_mii);
+	}
+
+	usb3->phy = devm_phy_create(dev, NULL, &ops);
+	if (IS_ERR(usb3->phy)) {
+		dev_err(dev, "Failed to create PHY\n");
+		return PTR_ERR(usb3->phy);
+	}
+
+	phy_set_drvdata(usb3->phy, usb3);
+	platform_set_drvdata(pdev, usb3);
+
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+	if (!IS_ERR(phy_provider))
+		dev_info(dev, "Registered Broadcom Northstar USB 3.0 PHY driver\n");
+
+	return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static struct platform_driver bcm_ns_usb3_driver = {
+	.probe		= bcm_ns_usb3_probe,
+	.driver = {
+		.name = "bcm_ns_usb3",
+		.of_match_table = bcm_ns_usb3_id_table,
+	},
+};
+module_platform_driver(bcm_ns_usb3_driver);
+
+MODULE_LICENSE("GPL v2");

drivers/phy/phy-bcm-ns2-pcie.c

@@ -18,11 +18,6 @@
 #include <linux/phy.h>
 #include <linux/phy/phy.h>
 
-struct ns2_pci_phy {
-	struct mdio_device *mdiodev;
-	struct phy *phy;
-};
-
 #define BLK_ADDR_REG_OFFSET	0x1f
 #define PLL_AFE1_100MHZ_BLK	0x2100
 #define PLL_CLK_AMP_OFFSET	0x03
@@ -30,17 +25,17 @@ struct ns2_pci_phy {
 
 static int ns2_pci_phy_init(struct phy *p)
 {
-	struct ns2_pci_phy *phy = phy_get_drvdata(p);
+	struct mdio_device *mdiodev = phy_get_drvdata(p);
 	int rc;
 
 	/* select the AFE 100MHz block page */
-	rc = mdiobus_write(phy->mdiodev->bus, phy->mdiodev->addr,
+	rc = mdiobus_write(mdiodev->bus, mdiodev->addr,
 			   BLK_ADDR_REG_OFFSET, PLL_AFE1_100MHZ_BLK);
 	if (rc)
 		goto err;
 
 	/* set the 100 MHz reference clock amplitude to 2.05 v */
-	rc = mdiobus_write(phy->mdiodev->bus, phy->mdiodev->addr,
+	rc = mdiobus_write(mdiodev->bus, mdiodev->addr,
 			   PLL_CLK_AMP_OFFSET, PLL_CLK_AMP_2P05V);
 	if (rc)
 		goto err;
@@ -48,19 +43,19 @@ static int ns2_pci_phy_init(struct phy *p)
 	return 0;
 
 err:
-	dev_err(&phy->mdiodev->dev, "Error %d writing to phy\n", rc);
+	dev_err(&mdiodev->dev, "Error %d writing to phy\n", rc);
 	return rc;
 }
 
-static struct phy_ops ns2_pci_phy_ops = {
+static const struct phy_ops ns2_pci_phy_ops = {
 	.init = ns2_pci_phy_init,
+	.owner = THIS_MODULE,
 };
 
 static int ns2_pci_phy_probe(struct mdio_device *mdiodev)
 {
 	struct device *dev = &mdiodev->dev;
 	struct phy_provider *provider;
-	struct ns2_pci_phy *p;
 	struct phy *phy;
 
 	phy = devm_phy_create(dev, dev->of_node, &ns2_pci_phy_ops);
@@ -69,16 +64,7 @@ static int ns2_pci_phy_probe(struct mdio_device *mdiodev)
 		return PTR_ERR(phy);
 	}
 
-	p = devm_kmalloc(dev, sizeof(struct ns2_pci_phy),
-			 GFP_KERNEL);
-	if (!p)
-		return -ENOMEM;
-
-	p->mdiodev = mdiodev;
-	dev_set_drvdata(dev, p);
-
-	p->phy = phy;
-	phy_set_drvdata(phy, p);
+	phy_set_drvdata(phy, mdiodev);
 
 	provider = devm_of_phy_provider_register(&phy->dev,
 						 of_phy_simple_xlate);

drivers/phy/phy-core.c

@@ -357,6 +357,21 @@ int phy_set_mode(struct phy *phy, enum phy_mode mode)
 }
 EXPORT_SYMBOL_GPL(phy_set_mode);
 
+int phy_reset(struct phy *phy)
+{
+	int ret;
+
+	if (!phy || !phy->ops->reset)
+		return 0;
+
+	mutex_lock(&phy->mutex);
+	ret = phy->ops->reset(phy);
+	mutex_unlock(&phy->mutex);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(phy_reset);
+
 /**
  * _of_phy_get() - lookup and obtain a reference to a phy by phandle
  * @np: device_node for which to get the phy

drivers/phy/phy-da8xx-usb.c

@@ -154,7 +154,7 @@ static int da8xx_usb_phy_probe(struct platform_device *pdev)
 		d_phy->regmap = syscon_regmap_lookup_by_compatible(
 							"ti,da830-cfgchip");
 	else
-		d_phy->regmap = syscon_regmap_lookup_by_pdevname("syscon.0");
+		d_phy->regmap = syscon_regmap_lookup_by_pdevname("syscon");
 	if (IS_ERR(d_phy->regmap)) {
 		dev_err(dev, "Failed to get syscon\n");
 		return PTR_ERR(d_phy->regmap);

drivers/phy/phy-exynos5-usbdrd.c

@@ -249,7 +249,7 @@ static void exynos5_usbdrd_phy_isol(struct phy_usb_instance *inst,
 static unsigned int
 exynos5_usbdrd_pipe3_set_refclk(struct phy_usb_instance *inst)
 {
-	static u32 reg;
+	u32 reg;
 	struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst);
 
 	/* restore any previous reference clock settings */
@@ -295,7 +295,7 @@ exynos5_usbdrd_pipe3_set_refclk(struct phy_usb_instance *inst)
 static unsigned int
 exynos5_usbdrd_utmi_set_refclk(struct phy_usb_instance *inst)
 {
-	static u32 reg;
+	u32 reg;
 	struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst);
 
 	/* restore any previous reference clock settings */

drivers/phy/phy-omap-usb2.c

@@ -133,11 +133,49 @@ static int omap_usb_power_on(struct phy *x)
 	return omap_usb_phy_power(phy, true);
 }
 
+static int omap_usb2_disable_clocks(struct omap_usb *phy)
+{
+	clk_disable(phy->wkupclk);
+	if (!IS_ERR(phy->optclk))
+		clk_disable(phy->optclk);
+
+	return 0;
+}
+
+static int omap_usb2_enable_clocks(struct omap_usb *phy)
+{
+	int ret;
+
+	ret = clk_enable(phy->wkupclk);
+	if (ret < 0) {
+		dev_err(phy->dev, "Failed to enable wkupclk %d\n", ret);
+		goto err0;
+	}
+
+	if (!IS_ERR(phy->optclk)) {
+		ret = clk_enable(phy->optclk);
+		if (ret < 0) {
+			dev_err(phy->dev, "Failed to enable optclk %d\n", ret);
+			goto err1;
+		}
+	}
+
+	return 0;
+
+err1:
+	clk_disable(phy->wkupclk);
+
+err0:
+	return ret;
+}
+
 static int omap_usb_init(struct phy *x)
 {
 	struct omap_usb *phy = phy_get_drvdata(x);
 	u32 val;
 
+	omap_usb2_enable_clocks(phy);
+
 	if (phy->flags & OMAP_USB2_CALIBRATE_FALSE_DISCONNECT) {
 		/*
 		 *
@@ -155,8 +193,16 @@ static int omap_usb_init(struct phy *x)
 	return 0;
 }
 
+static int omap_usb_exit(struct phy *x)
+{
+	struct omap_usb *phy = phy_get_drvdata(x);
+
+	return omap_usb2_disable_clocks(phy);
+}
+
 static const struct phy_ops ops = {
 	.init		= omap_usb_init,
+	.exit		= omap_usb_exit,
 	.power_on	= omap_usb_power_on,
 	.power_off	= omap_usb_power_off,
 	.owner		= THIS_MODULE,
@@ -376,65 +422,11 @@ static int omap_usb2_remove(struct platform_device *pdev)
 	return 0;
 }
 
-#ifdef CONFIG_PM
-
-static int omap_usb2_runtime_suspend(struct device *dev)
-{
-	struct platform_device	*pdev = to_platform_device(dev);
-	struct omap_usb	*phy = platform_get_drvdata(pdev);
-
-	clk_disable(phy->wkupclk);
-	if (!IS_ERR(phy->optclk))
-		clk_disable(phy->optclk);
-
-	return 0;
-}
-
-static int omap_usb2_runtime_resume(struct device *dev)
-{
-	struct platform_device	*pdev = to_platform_device(dev);
-	struct omap_usb	*phy = platform_get_drvdata(pdev);
-	int ret;
-
-	ret = clk_enable(phy->wkupclk);
-	if (ret < 0) {
-		dev_err(phy->dev, "Failed to enable wkupclk %d\n", ret);
-		goto err0;
-	}
-
-	if (!IS_ERR(phy->optclk)) {
-		ret = clk_enable(phy->optclk);
-		if (ret < 0) {
-			dev_err(phy->dev, "Failed to enable optclk %d\n", ret);
-			goto err1;
-		}
-	}
-
-	return 0;
-
-err1:
-	clk_disable(phy->wkupclk);
-
-err0:
-	return ret;
-}
-
-static const struct dev_pm_ops omap_usb2_pm_ops = {
-	SET_RUNTIME_PM_OPS(omap_usb2_runtime_suspend, omap_usb2_runtime_resume,
-		NULL)
-};
-
-#define DEV_PM_OPS     (&omap_usb2_pm_ops)
-#else
-#define DEV_PM_OPS     NULL
-#endif
-
 static struct platform_driver omap_usb2_driver = {
 	.probe		= omap_usb2_probe,
 	.remove		= omap_usb2_remove,
 	.driver		= {
 		.name	= "omap-usb2",
-		.pm	= DEV_PM_OPS,
 		.of_match_table = omap_usb2_id_table,
 	},
 };

drivers/phy/phy-qcom-ufs.c

@@ -283,10 +283,8 @@ static int __ufs_qcom_phy_init_vreg(struct phy *phy,
 			err = 0;
 		}
 		snprintf(prop_name, MAX_PROP_NAME, "%s-always-on", name);
-		if (of_get_property(dev->of_node, prop_name, NULL))
-			vreg->is_always_on = true;
-		else
-			vreg->is_always_on = false;
+		vreg->is_always_on = of_property_read_bool(dev->of_node,
+							   prop_name);
 	}
 
 	if (!strcmp(name, "vdda-pll")) {

drivers/phy/phy-rcar-gen3-usb2.c

@@ -280,6 +280,7 @@ static irqreturn_t rcar_gen3_phy_usb2_irq(int irq, void *_ch)
 
 static const struct of_device_id rcar_gen3_phy_usb2_match_table[] = {
 	{ .compatible = "renesas,usb2-phy-r8a7795" },
+	{ .compatible = "renesas,usb2-phy-r8a7796" },
 	{ .compatible = "renesas,rcar-gen3-usb2-phy" },
 	{ }
 };

drivers/phy/phy-rockchip-inno-usb2.c

@@ -0,0 +1,707 @@
+/*
+ * Rockchip USB2.0 PHY with Innosilicon IP block driver
+ *
+ * Copyright (C) 2016 Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/gpio/consumer.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
+
+#define BIT_WRITEABLE_SHIFT	16
+#define SCHEDULE_DELAY	(60 * HZ)
+
+enum rockchip_usb2phy_port_id {
+	USB2PHY_PORT_OTG,
+	USB2PHY_PORT_HOST,
+	USB2PHY_NUM_PORTS,
+};
+
+enum rockchip_usb2phy_host_state {
+	PHY_STATE_HS_ONLINE	= 0,
+	PHY_STATE_DISCONNECT	= 1,
+	PHY_STATE_CONNECT	= 2,
+	PHY_STATE_FS_LS_ONLINE	= 4,
+};
+
+struct usb2phy_reg {
+	unsigned int	offset;
+	unsigned int	bitend;
+	unsigned int	bitstart;
+	unsigned int	disable;
+	unsigned int	enable;
+};
+
+/**
+ * struct rockchip_usb2phy_port_cfg: usb-phy port configuration.
+ * @phy_sus: phy suspend register.
+ * @ls_det_en: linestate detection enable register.
+ * @ls_det_st: linestate detection state register.
+ * @ls_det_clr: linestate detection clear register.
+ * @utmi_ls: utmi linestate state register.
+ * @utmi_hstdet: utmi host disconnect register.
+ */
+struct rockchip_usb2phy_port_cfg {
+	struct usb2phy_reg	phy_sus;
+	struct usb2phy_reg	ls_det_en;
+	struct usb2phy_reg	ls_det_st;
+	struct usb2phy_reg	ls_det_clr;
+	struct usb2phy_reg	utmi_ls;
+	struct usb2phy_reg	utmi_hstdet;
+};
+
+/**
+ * struct rockchip_usb2phy_cfg: usb-phy configuration.
+ * @reg: the address offset of grf for usb-phy config.
+ * @num_ports: specify how many ports that the phy has.
+ * @clkout_ctl: keep on/turn off output clk of phy.
+ */
+struct rockchip_usb2phy_cfg {
+	unsigned int	reg;
+	unsigned int	num_ports;
+	struct usb2phy_reg	clkout_ctl;
+	const struct rockchip_usb2phy_port_cfg	port_cfgs[USB2PHY_NUM_PORTS];
+};
+
+/**
+ * struct rockchip_usb2phy_port: usb-phy port data.
+ * @port_id: flag for otg port or host port.
+ * @suspended: phy suspended flag.
+ * @ls_irq: IRQ number assigned for linestate detection.
+ * @mutex: for register updating in sm_work.
+ * @sm_work: OTG state machine work.
+ * @phy_cfg: port register configuration, assigned by driver data.
+ */
+struct rockchip_usb2phy_port {
+	struct phy	*phy;
+	unsigned int	port_id;
+	bool		suspended;
+	int		ls_irq;
+	struct mutex	mutex;
+	struct		delayed_work sm_work;
+	const struct	rockchip_usb2phy_port_cfg *port_cfg;
+};
+
+/**
+ * struct rockchip_usb2phy: usb2.0 phy driver data.
+ * @grf: General Register Files regmap.
+ * @clk: clock struct of phy input clk.
+ * @clk480m: clock struct of phy output clk.
+ * @clk_hw: clock struct of phy output clk management.
+ * @phy_cfg: phy register configuration, assigned by driver data.
+ * @ports: phy port instance.
+ */
+struct rockchip_usb2phy {
+	struct device	*dev;
+	struct regmap	*grf;
+	struct clk	*clk;
+	struct clk	*clk480m;
+	struct clk_hw	clk480m_hw;
+	const struct rockchip_usb2phy_cfg	*phy_cfg;
+	struct rockchip_usb2phy_port	ports[USB2PHY_NUM_PORTS];
+};
+
+static inline int property_enable(struct rockchip_usb2phy *rphy,
+				  const struct usb2phy_reg *reg, bool en)
+{
+	unsigned int val, mask, tmp;
+
+	tmp = en ? reg->enable : reg->disable;
+	mask = GENMASK(reg->bitend, reg->bitstart);
+	val = (tmp << reg->bitstart) | (mask << BIT_WRITEABLE_SHIFT);
+
+	return regmap_write(rphy->grf, reg->offset, val);
+}
+
+static inline bool property_enabled(struct rockchip_usb2phy *rphy,
+				    const struct usb2phy_reg *reg)
+{
+	int ret;
+	unsigned int tmp, orig;
+	unsigned int mask = GENMASK(reg->bitend, reg->bitstart);
+
+	ret = regmap_read(rphy->grf, reg->offset, &orig);
+	if (ret)
+		return false;
+
+	tmp = (orig & mask) >> reg->bitstart;
+	return tmp == reg->enable;
+}
+
+static int rockchip_usb2phy_clk480m_enable(struct clk_hw *hw)
+{
+	struct rockchip_usb2phy *rphy =
+		container_of(hw, struct rockchip_usb2phy, clk480m_hw);
+	int ret;
+
+	/* turn on 480m clk output if it is off */
+	if (!property_enabled(rphy, &rphy->phy_cfg->clkout_ctl)) {
+		ret = property_enable(rphy, &rphy->phy_cfg->clkout_ctl, true);
+		if (ret)
+			return ret;
+
+		/* waitting for the clk become stable */
+		mdelay(1);
+	}
+
+	return 0;
+}
+
+static void rockchip_usb2phy_clk480m_disable(struct clk_hw *hw)
+{
+	struct rockchip_usb2phy *rphy =
+		container_of(hw, struct rockchip_usb2phy, clk480m_hw);
+
+	/* turn off 480m clk output */
+	property_enable(rphy, &rphy->phy_cfg->clkout_ctl, false);
+}
+
+static int rockchip_usb2phy_clk480m_enabled(struct clk_hw *hw)
+{
+	struct rockchip_usb2phy *rphy =
+		container_of(hw, struct rockchip_usb2phy, clk480m_hw);
+
+	return property_enabled(rphy, &rphy->phy_cfg->clkout_ctl);
+}
+
+static unsigned long
+rockchip_usb2phy_clk480m_recalc_rate(struct clk_hw *hw,
+				     unsigned long parent_rate)
+{
+	return 480000000;
+}
+
+static const struct clk_ops rockchip_usb2phy_clkout_ops = {
+	.enable = rockchip_usb2phy_clk480m_enable,
+	.disable = rockchip_usb2phy_clk480m_disable,
+	.is_enabled = rockchip_usb2phy_clk480m_enabled,
+	.recalc_rate = rockchip_usb2phy_clk480m_recalc_rate,
+};
+
+static void rockchip_usb2phy_clk480m_unregister(void *data)
+{
+	struct rockchip_usb2phy *rphy = data;
+
+	of_clk_del_provider(rphy->dev->of_node);
+	clk_unregister(rphy->clk480m);
+}
+
+static int
+rockchip_usb2phy_clk480m_register(struct rockchip_usb2phy *rphy)
+{
+	struct device_node *node = rphy->dev->of_node;
+	struct clk_init_data init;
+	const char *clk_name;
+	int ret;
+
+	init.flags = 0;
+	init.name = "clk_usbphy_480m";
+	init.ops = &rockchip_usb2phy_clkout_ops;
+
+	/* optional override of the clockname */
+	of_property_read_string(node, "clock-output-names", &init.name);
+
+	if (rphy->clk) {
+		clk_name = __clk_get_name(rphy->clk);
+		init.parent_names = &clk_name;
+		init.num_parents = 1;
+	} else {
+		init.parent_names = NULL;
+		init.num_parents = 0;
+	}
+
+	rphy->clk480m_hw.init = &init;
+
+	/* register the clock */
+	rphy->clk480m = clk_register(rphy->dev, &rphy->clk480m_hw);
+	if (IS_ERR(rphy->clk480m)) {
+		ret = PTR_ERR(rphy->clk480m);
+		goto err_ret;
+	}
+
+	ret = of_clk_add_provider(node, of_clk_src_simple_get, rphy->clk480m);
+	if (ret < 0)
+		goto err_clk_provider;
+
+	ret = devm_add_action(rphy->dev, rockchip_usb2phy_clk480m_unregister,
+			      rphy);
+	if (ret < 0)
+		goto err_unreg_action;
+
+	return 0;
+
+err_unreg_action:
+	of_clk_del_provider(node);
+err_clk_provider:
+	clk_unregister(rphy->clk480m);
+err_ret:
+	return ret;
+}
+
+static int rockchip_usb2phy_init(struct phy *phy)
+{
+	struct rockchip_usb2phy_port *rport = phy_get_drvdata(phy);
+	struct rockchip_usb2phy *rphy = dev_get_drvdata(phy->dev.parent);
+	int ret;
+
+	if (rport->port_id == USB2PHY_PORT_HOST) {
+		/* clear linestate and enable linestate detect irq */
+		mutex_lock(&rport->mutex);
+
+		ret = property_enable(rphy, &rport->port_cfg->ls_det_clr, true);
+		if (ret) {
+			mutex_unlock(&rport->mutex);
+			return ret;
+		}
+
+		ret = property_enable(rphy, &rport->port_cfg->ls_det_en, true);
+		if (ret) {
+			mutex_unlock(&rport->mutex);
+			return ret;
+		}
+
+		mutex_unlock(&rport->mutex);
+		schedule_delayed_work(&rport->sm_work, SCHEDULE_DELAY);
+	}
+
+	return 0;
+}
+
+static int rockchip_usb2phy_power_on(struct phy *phy)
+{
+	struct rockchip_usb2phy_port *rport = phy_get_drvdata(phy);
+	struct rockchip_usb2phy *rphy = dev_get_drvdata(phy->dev.parent);
+	int ret;
+
+	dev_dbg(&rport->phy->dev, "port power on\n");
+
+	if (!rport->suspended)
+		return 0;
+
+	ret = clk_prepare_enable(rphy->clk480m);
+	if (ret)
+		return ret;
+
+	ret = property_enable(rphy, &rport->port_cfg->phy_sus, false);
+	if (ret)
+		return ret;
+
+	rport->suspended = false;
+	return 0;
+}
+
+static int rockchip_usb2phy_power_off(struct phy *phy)
+{
+	struct rockchip_usb2phy_port *rport = phy_get_drvdata(phy);
+	struct rockchip_usb2phy *rphy = dev_get_drvdata(phy->dev.parent);
+	int ret;
+
+	dev_dbg(&rport->phy->dev, "port power off\n");
+
+	if (rport->suspended)
+		return 0;
+
+	ret = property_enable(rphy, &rport->port_cfg->phy_sus, true);
+	if (ret)
+		return ret;
+
+	rport->suspended = true;
+	clk_disable_unprepare(rphy->clk480m);
+
+	return 0;
+}
+
+static int rockchip_usb2phy_exit(struct phy *phy)
+{
+	struct rockchip_usb2phy_port *rport = phy_get_drvdata(phy);
+
+	if (rport->port_id == USB2PHY_PORT_HOST)
+		cancel_delayed_work_sync(&rport->sm_work);
+
+	return 0;
+}
+
+static const struct phy_ops rockchip_usb2phy_ops = {
+	.init		= rockchip_usb2phy_init,
+	.exit		= rockchip_usb2phy_exit,
+	.power_on	= rockchip_usb2phy_power_on,
+	.power_off	= rockchip_usb2phy_power_off,
+	.owner		= THIS_MODULE,
+};
+
+/*
+ * The function manage host-phy port state and suspend/resume phy port
+ * to save power.
+ *
+ * we rely on utmi_linestate and utmi_hostdisconnect to identify whether
+ * devices is disconnect or not. Besides, we do not need care it is FS/LS
+ * disconnected or HS disconnected, actually, we just only need get the
+ * device is disconnected at last through rearm the delayed work,
+ * to suspend the phy port in _PHY_STATE_DISCONNECT_ case.
+ *
+ * NOTE: It may invoke *phy_powr_off or *phy_power_on which will invoke
+ * some clk related APIs, so do not invoke it from interrupt context directly.
+ */
+static void rockchip_usb2phy_sm_work(struct work_struct *work)
+{
+	struct rockchip_usb2phy_port *rport =
+		container_of(work, struct rockchip_usb2phy_port, sm_work.work);
+	struct rockchip_usb2phy *rphy = dev_get_drvdata(rport->phy->dev.parent);
+	unsigned int sh = rport->port_cfg->utmi_hstdet.bitend -
+			  rport->port_cfg->utmi_hstdet.bitstart + 1;
+	unsigned int ul, uhd, state;
+	unsigned int ul_mask, uhd_mask;
+	int ret;
+
+	mutex_lock(&rport->mutex);
+
+	ret = regmap_read(rphy->grf, rport->port_cfg->utmi_ls.offset, &ul);
+	if (ret < 0)
+		goto next_schedule;
+
+	ret = regmap_read(rphy->grf, rport->port_cfg->utmi_hstdet.offset,
+			  &uhd);
+	if (ret < 0)
+		goto next_schedule;
+
+	uhd_mask = GENMASK(rport->port_cfg->utmi_hstdet.bitend,
+			   rport->port_cfg->utmi_hstdet.bitstart);
+	ul_mask = GENMASK(rport->port_cfg->utmi_ls.bitend,
+			  rport->port_cfg->utmi_ls.bitstart);
+
+	/* stitch on utmi_ls and utmi_hstdet as phy state */
+	state = ((uhd & uhd_mask) >> rport->port_cfg->utmi_hstdet.bitstart) |
+		(((ul & ul_mask) >> rport->port_cfg->utmi_ls.bitstart) << sh);
+
+	switch (state) {
+	case PHY_STATE_HS_ONLINE:
+		dev_dbg(&rport->phy->dev, "HS online\n");
+		break;
+	case PHY_STATE_FS_LS_ONLINE:
+		/*
+		 * For FS/LS device, the online state share with connect state
+		 * from utmi_ls and utmi_hstdet register, so we distinguish
+		 * them via suspended flag.
+		 *
+		 * Plus, there are two cases, one is D- Line pull-up, and D+
+		 * line pull-down, the state is 4; another is D+ line pull-up,
+		 * and D- line pull-down, the state is 2.
+		 */
+		if (!rport->suspended) {
+			/* D- line pull-up, D+ line pull-down */
+			dev_dbg(&rport->phy->dev, "FS/LS online\n");
+			break;
+		}
+		/* fall through */
+	case PHY_STATE_CONNECT:
+		if (rport->suspended) {
+			dev_dbg(&rport->phy->dev, "Connected\n");
+			rockchip_usb2phy_power_on(rport->phy);
+			rport->suspended = false;
+		} else {
+			/* D+ line pull-up, D- line pull-down */
+			dev_dbg(&rport->phy->dev, "FS/LS online\n");
+		}
+		break;
+	case PHY_STATE_DISCONNECT:
+		if (!rport->suspended) {
+			dev_dbg(&rport->phy->dev, "Disconnected\n");
+			rockchip_usb2phy_power_off(rport->phy);
+			rport->suspended = true;
+		}
+
+		/*
+		 * activate the linestate detection to get the next device
+		 * plug-in irq.
+		 */
+		property_enable(rphy, &rport->port_cfg->ls_det_clr, true);
+		property_enable(rphy, &rport->port_cfg->ls_det_en, true);
+
+		/*
+		 * we don't need to rearm the delayed work when the phy port
+		 * is suspended.
+		 */
+		mutex_unlock(&rport->mutex);
+		return;
+	default:
+		dev_dbg(&rport->phy->dev, "unknown phy state\n");
+		break;
+	}
+
+next_schedule:
+	mutex_unlock(&rport->mutex);
+	schedule_delayed_work(&rport->sm_work, SCHEDULE_DELAY);
+}
+
+static irqreturn_t rockchip_usb2phy_linestate_irq(int irq, void *data)
+{
+	struct rockchip_usb2phy_port *rport = data;
+	struct rockchip_usb2phy *rphy = dev_get_drvdata(rport->phy->dev.parent);
+
+	if (!property_enabled(rphy, &rport->port_cfg->ls_det_st))
+		return IRQ_NONE;
+
+	mutex_lock(&rport->mutex);
+
+	/* disable linestate detect irq and clear its status */
+	property_enable(rphy, &rport->port_cfg->ls_det_en, false);
+	property_enable(rphy, &rport->port_cfg->ls_det_clr, true);
+
+	mutex_unlock(&rport->mutex);
+
+	/*
+	 * In this case for host phy port, a new device is plugged in,
+	 * meanwhile, if the phy port is suspended, we need rearm the work to
+	 * resume it and mange its states; otherwise, we do nothing about that.
+	 */
+	if (rport->suspended && rport->port_id == USB2PHY_PORT_HOST)
+		rockchip_usb2phy_sm_work(&rport->sm_work.work);
+
+	return IRQ_HANDLED;
+}
+
+static int rockchip_usb2phy_host_port_init(struct rockchip_usb2phy *rphy,
+					   struct rockchip_usb2phy_port *rport,
+					   struct device_node *child_np)
+{
+	int ret;
+
+	rport->port_id = USB2PHY_PORT_HOST;
+	rport->port_cfg = &rphy->phy_cfg->port_cfgs[USB2PHY_PORT_HOST];
+	rport->suspended = true;
+
+	mutex_init(&rport->mutex);
+	INIT_DELAYED_WORK(&rport->sm_work, rockchip_usb2phy_sm_work);
+
+	rport->ls_irq = of_irq_get_byname(child_np, "linestate");
+	if (rport->ls_irq < 0) {
+		dev_err(rphy->dev, "no linestate irq provided\n");
+		return rport->ls_irq;
+	}
+
+	ret = devm_request_threaded_irq(rphy->dev, rport->ls_irq, NULL,
+					rockchip_usb2phy_linestate_irq,
+					IRQF_ONESHOT,
+					"rockchip_usb2phy", rport);
+	if (ret) {
+		dev_err(rphy->dev, "failed to request irq handle\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int rockchip_usb2phy_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct device_node *child_np;
+	struct phy_provider *provider;
+	struct rockchip_usb2phy *rphy;
+	const struct rockchip_usb2phy_cfg *phy_cfgs;
+	const struct of_device_id *match;
+	unsigned int reg;
+	int index, ret;
+
+	rphy = devm_kzalloc(dev, sizeof(*rphy), GFP_KERNEL);
+	if (!rphy)
+		return -ENOMEM;
+
+	match = of_match_device(dev->driver->of_match_table, dev);
+	if (!match || !match->data) {
+		dev_err(dev, "phy configs are not assigned!\n");
+		return -EINVAL;
+	}
+
+	if (!dev->parent || !dev->parent->of_node)
+		return -EINVAL;
+
+	rphy->grf = syscon_node_to_regmap(dev->parent->of_node);
+	if (IS_ERR(rphy->grf))
+		return PTR_ERR(rphy->grf);
+
+	if (of_property_read_u32(np, "reg", &reg)) {
+		dev_err(dev, "the reg property is not assigned in %s node\n",
+			np->name);
+		return -EINVAL;
+	}
+
+	rphy->dev = dev;
+	phy_cfgs = match->data;
+	platform_set_drvdata(pdev, rphy);
+
+	/* find out a proper config which can be matched with dt. */
+	index = 0;
+	while (phy_cfgs[index].reg) {
+		if (phy_cfgs[index].reg == reg) {
+			rphy->phy_cfg = &phy_cfgs[index];
+			break;
+		}
+
+		++index;
+	}
+
+	if (!rphy->phy_cfg) {
+		dev_err(dev, "no phy-config can be matched with %s node\n",
+			np->name);
+		return -EINVAL;
+	}
+
+	rphy->clk = of_clk_get_by_name(np, "phyclk");
+	if (!IS_ERR(rphy->clk)) {
+		clk_prepare_enable(rphy->clk);
+	} else {
+		dev_info(&pdev->dev, "no phyclk specified\n");
+		rphy->clk = NULL;
+	}
+
+	ret = rockchip_usb2phy_clk480m_register(rphy);
+	if (ret) {
+		dev_err(dev, "failed to register 480m output clock\n");
+		goto disable_clks;
+	}
+
+	index = 0;
+	for_each_available_child_of_node(np, child_np) {
+		struct rockchip_usb2phy_port *rport = &rphy->ports[index];
+		struct phy *phy;
+
+		/*
+		 * This driver aim to support both otg-port and host-port,
+		 * but unfortunately, the otg part is not ready in current,
+		 * so this comments and below codes are interim, which should
+		 * be changed after otg-port is supplied soon.
+		 */
+		if (of_node_cmp(child_np->name, "host-port"))
+			goto next_child;
+
+		phy = devm_phy_create(dev, child_np, &rockchip_usb2phy_ops);
+		if (IS_ERR(phy)) {
+			dev_err(dev, "failed to create phy\n");
+			ret = PTR_ERR(phy);
+			goto put_child;
+		}
+
+		rport->phy = phy;
+		phy_set_drvdata(rport->phy, rport);
+
+		ret = rockchip_usb2phy_host_port_init(rphy, rport, child_np);
+		if (ret)
+			goto put_child;
+
+next_child:
+		/* to prevent out of boundary */
+		if (++index >= rphy->phy_cfg->num_ports)
+			break;
+	}
+
+	provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+	return PTR_ERR_OR_ZERO(provider);
+
+put_child:
+	of_node_put(child_np);
+disable_clks:
+	if (rphy->clk) {
+		clk_disable_unprepare(rphy->clk);
+		clk_put(rphy->clk);
+	}
+	return ret;
+}
+
+static const struct rockchip_usb2phy_cfg rk3366_phy_cfgs[] = {
+	{
+		.reg = 0x700,
+		.num_ports	= 2,
+		.clkout_ctl	= { 0x0724, 15, 15, 1, 0 },
+		.port_cfgs	= {
+			[USB2PHY_PORT_HOST] = {
+				.phy_sus	= { 0x0728, 15, 0, 0, 0x1d1 },
+				.ls_det_en	= { 0x0680, 4, 4, 0, 1 },
+				.ls_det_st	= { 0x0690, 4, 4, 0, 1 },
+				.ls_det_clr	= { 0x06a0, 4, 4, 0, 1 },
+				.utmi_ls	= { 0x049c, 14, 13, 0, 1 },
+				.utmi_hstdet	= { 0x049c, 12, 12, 0, 1 }
+			}
+		},
+	},
+	{ /* sentinel */ }
+};
+
+static const struct rockchip_usb2phy_cfg rk3399_phy_cfgs[] = {
+	{
+		.reg = 0xe450,
+		.num_ports	= 2,
+		.clkout_ctl	= { 0xe450, 4, 4, 1, 0 },
+		.port_cfgs	= {
+			[USB2PHY_PORT_HOST] = {
+				.phy_sus	= { 0xe458, 1, 0, 0x2, 0x1 },
+				.ls_det_en	= { 0xe3c0, 6, 6, 0, 1 },
+				.ls_det_st	= { 0xe3e0, 6, 6, 0, 1 },
+				.ls_det_clr	= { 0xe3d0, 6, 6, 0, 1 },
+				.utmi_ls	= { 0xe2ac, 22, 21, 0, 1 },
+				.utmi_hstdet	= { 0xe2ac, 23, 23, 0, 1 }
+			}
+		},
+	},
+	{
+		.reg = 0xe460,
+		.num_ports	= 2,
+		.clkout_ctl	= { 0xe460, 4, 4, 1, 0 },
+		.port_cfgs	= {
+			[USB2PHY_PORT_HOST] = {
+				.phy_sus	= { 0xe468, 1, 0, 0x2, 0x1 },
+				.ls_det_en	= { 0xe3c0, 11, 11, 0, 1 },
+				.ls_det_st	= { 0xe3e0, 11, 11, 0, 1 },
+				.ls_det_clr	= { 0xe3d0, 11, 11, 0, 1 },
+				.utmi_ls	= { 0xe2ac, 26, 25, 0, 1 },
+				.utmi_hstdet	= { 0xe2ac, 27, 27, 0, 1 }
+			}
+		},
+	},
+	{ /* sentinel */ }
+};
+
+static const struct of_device_id rockchip_usb2phy_dt_match[] = {
+	{ .compatible = "rockchip,rk3366-usb2phy", .data = &rk3366_phy_cfgs },
+	{ .compatible = "rockchip,rk3399-usb2phy", .data = &rk3399_phy_cfgs },
+	{}
+};
+MODULE_DEVICE_TABLE(of, rockchip_usb2phy_dt_match);
+
+static struct platform_driver rockchip_usb2phy_driver = {
+	.probe		= rockchip_usb2phy_probe,
+	.driver		= {
+		.name	= "rockchip-usb2phy",
+		.of_match_table = rockchip_usb2phy_dt_match,
+	},
+};
+module_platform_driver(rockchip_usb2phy_driver);
+
+MODULE_AUTHOR("Frank Wang <frank.wang@rock-chips.com>");
+MODULE_DESCRIPTION("Rockchip USB2.0 PHY driver");
+MODULE_LICENSE("GPL v2");

drivers/phy/phy-rockchip-pcie.c

@@ -0,0 +1,357 @@
+/*
+ * Rockchip PCIe PHY driver
+ *
+ * Copyright (C) 2016 Shawn Lin <shawn.lin@rock-chips.com>
+ * Copyright (C) 2016 ROCKCHIP, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+
+/*
+ * The higher 16-bit of this register is used for write protection
+ * only if BIT(x + 16) set to 1 the BIT(x) can be written.
+ */
+#define HIWORD_UPDATE(val, mask, shift) \
+		((val) << (shift) | (mask) << ((shift) + 16))
+
+#define PHY_MAX_LANE_NUM      4
+#define PHY_CFG_DATA_SHIFT    7
+#define PHY_CFG_ADDR_SHIFT    1
+#define PHY_CFG_DATA_MASK     0xf
+#define PHY_CFG_ADDR_MASK     0x3f
+#define PHY_CFG_RD_MASK       0x3ff
+#define PHY_CFG_WR_ENABLE     1
+#define PHY_CFG_WR_DISABLE    1
+#define PHY_CFG_WR_SHIFT      0
+#define PHY_CFG_WR_MASK       1
+#define PHY_CFG_PLL_LOCK      0x10
+#define PHY_CFG_CLK_TEST      0x10
+#define PHY_CFG_CLK_SCC       0x12
+#define PHY_CFG_SEPE_RATE     BIT(3)
+#define PHY_CFG_PLL_100M      BIT(3)
+#define PHY_PLL_LOCKED        BIT(9)
+#define PHY_PLL_OUTPUT        BIT(10)
+#define PHY_LANE_A_STATUS     0x30
+#define PHY_LANE_B_STATUS     0x31
+#define PHY_LANE_C_STATUS     0x32
+#define PHY_LANE_D_STATUS     0x33
+#define PHY_LANE_RX_DET_SHIFT 11
+#define PHY_LANE_RX_DET_TH    0x1
+#define PHY_LANE_IDLE_OFF     0x1
+#define PHY_LANE_IDLE_MASK    0x1
+#define PHY_LANE_IDLE_A_SHIFT 3
+#define PHY_LANE_IDLE_B_SHIFT 4
+#define PHY_LANE_IDLE_C_SHIFT 5
+#define PHY_LANE_IDLE_D_SHIFT 6
+
+struct rockchip_pcie_data {
+	unsigned int pcie_conf;
+	unsigned int pcie_status;
+	unsigned int pcie_laneoff;
+};
+
+struct rockchip_pcie_phy {
+	struct rockchip_pcie_data *phy_data;
+	struct regmap *reg_base;
+	struct reset_control *phy_rst;
+	struct clk *clk_pciephy_ref;
+};
+
+static inline void phy_wr_cfg(struct rockchip_pcie_phy *rk_phy,
+			      u32 addr, u32 data)
+{
+	regmap_write(rk_phy->reg_base, rk_phy->phy_data->pcie_conf,
+		     HIWORD_UPDATE(data,
+				   PHY_CFG_DATA_MASK,
+				   PHY_CFG_DATA_SHIFT) |
+		     HIWORD_UPDATE(addr,
+				   PHY_CFG_ADDR_MASK,
+				   PHY_CFG_ADDR_SHIFT));
+	udelay(1);
+	regmap_write(rk_phy->reg_base, rk_phy->phy_data->pcie_conf,
+		     HIWORD_UPDATE(PHY_CFG_WR_ENABLE,
+				   PHY_CFG_WR_MASK,
+				   PHY_CFG_WR_SHIFT));
+	udelay(1);
+	regmap_write(rk_phy->reg_base, rk_phy->phy_data->pcie_conf,
+		     HIWORD_UPDATE(PHY_CFG_WR_DISABLE,
+				   PHY_CFG_WR_MASK,
+				   PHY_CFG_WR_SHIFT));
+}
+
+static inline u32 phy_rd_cfg(struct rockchip_pcie_phy *rk_phy,
+			     u32 addr)
+{
+	u32 val;
+
+	regmap_write(rk_phy->reg_base, rk_phy->phy_data->pcie_conf,
+		     HIWORD_UPDATE(addr,
+				   PHY_CFG_RD_MASK,
+				   PHY_CFG_ADDR_SHIFT));
+	regmap_read(rk_phy->reg_base,
+		    rk_phy->phy_data->pcie_status,
+		    &val);
+	return val;
+}
+
+static int rockchip_pcie_phy_power_off(struct phy *phy)
+{
+	struct rockchip_pcie_phy *rk_phy = phy_get_drvdata(phy);
+	int err = 0;
+
+	err = reset_control_assert(rk_phy->phy_rst);
+	if (err) {
+		dev_err(&phy->dev, "assert phy_rst err %d\n", err);
+		return err;
+	}
+
+	return 0;
+}
+
+static int rockchip_pcie_phy_power_on(struct phy *phy)
+{
+	struct rockchip_pcie_phy *rk_phy = phy_get_drvdata(phy);
+	int err = 0;
+	u32 status;
+	unsigned long timeout;
+
+	err = reset_control_deassert(rk_phy->phy_rst);
+	if (err) {
+		dev_err(&phy->dev, "deassert phy_rst err %d\n", err);
+		return err;
+	}
+
+	regmap_write(rk_phy->reg_base, rk_phy->phy_data->pcie_conf,
+		     HIWORD_UPDATE(PHY_CFG_PLL_LOCK,
+				   PHY_CFG_ADDR_MASK,
+				   PHY_CFG_ADDR_SHIFT));
+
+	/*
+	 * No documented timeout value for phy operation below,
+	 * so we make it large enough here. And we use loop-break
+	 * method which should not be harmful.
+	 */
+	timeout = jiffies + msecs_to_jiffies(1000);
+
+	err = -EINVAL;
+	while (time_before(jiffies, timeout)) {
+		regmap_read(rk_phy->reg_base,
+			    rk_phy->phy_data->pcie_status,
+			    &status);
+		if (status & PHY_PLL_LOCKED) {
+			dev_dbg(&phy->dev, "pll locked!\n");
+			err = 0;
+			break;
+		}
+		msleep(20);
+	}
+
+	if (err) {
+		dev_err(&phy->dev, "pll lock timeout!\n");
+		goto err_pll_lock;
+	}
+
+	phy_wr_cfg(rk_phy, PHY_CFG_CLK_TEST, PHY_CFG_SEPE_RATE);
+	phy_wr_cfg(rk_phy, PHY_CFG_CLK_SCC, PHY_CFG_PLL_100M);
+
+	err = -ETIMEDOUT;
+	while (time_before(jiffies, timeout)) {
+		regmap_read(rk_phy->reg_base,
+			    rk_phy->phy_data->pcie_status,
+			    &status);
+		if (!(status & PHY_PLL_OUTPUT)) {
+			dev_dbg(&phy->dev, "pll output enable done!\n");
+			err = 0;
+			break;
+		}
+		msleep(20);
+	}
+
+	if (err) {
+		dev_err(&phy->dev, "pll output enable timeout!\n");
+		goto err_pll_lock;
+	}
+
+	regmap_write(rk_phy->reg_base, rk_phy->phy_data->pcie_conf,
+		     HIWORD_UPDATE(PHY_CFG_PLL_LOCK,
+				   PHY_CFG_ADDR_MASK,
+				   PHY_CFG_ADDR_SHIFT));
+	err = -EINVAL;
+	while (time_before(jiffies, timeout)) {
+		regmap_read(rk_phy->reg_base,
+			    rk_phy->phy_data->pcie_status,
+			    &status);
+		if (status & PHY_PLL_LOCKED) {
+			dev_dbg(&phy->dev, "pll relocked!\n");
+			err = 0;
+			break;
+		}
+		msleep(20);
+	}
+
+	if (err) {
+		dev_err(&phy->dev, "pll relock timeout!\n");
+		goto err_pll_lock;
+	}
+
+	return 0;
+
+err_pll_lock:
+	reset_control_assert(rk_phy->phy_rst);
+	return err;
+}
+
+static int rockchip_pcie_phy_init(struct phy *phy)
+{
+	struct rockchip_pcie_phy *rk_phy = phy_get_drvdata(phy);
+	int err = 0;
+
+	err = clk_prepare_enable(rk_phy->clk_pciephy_ref);
+	if (err) {
+		dev_err(&phy->dev, "Fail to enable pcie ref clock.\n");
+		goto err_refclk;
+	}
+
+	err = reset_control_assert(rk_phy->phy_rst);
+	if (err) {
+		dev_err(&phy->dev, "assert phy_rst err %d\n", err);
+		goto err_reset;
+	}
+
+	return err;
+
+err_reset:
+	clk_disable_unprepare(rk_phy->clk_pciephy_ref);
+err_refclk:
+	return err;
+}
+
+static int rockchip_pcie_phy_exit(struct phy *phy)
+{
+	struct rockchip_pcie_phy *rk_phy = phy_get_drvdata(phy);
+	int err = 0;
+
+	clk_disable_unprepare(rk_phy->clk_pciephy_ref);
+
+	err = reset_control_deassert(rk_phy->phy_rst);
+	if (err) {
+		dev_err(&phy->dev, "deassert phy_rst err %d\n", err);
+		goto err_reset;
+	}
+
+	return err;
+
+err_reset:
+	clk_prepare_enable(rk_phy->clk_pciephy_ref);
+	return err;
+}
+
+static const struct phy_ops ops = {
+	.init		= rockchip_pcie_phy_init,
+	.exit		= rockchip_pcie_phy_exit,
+	.power_on	= rockchip_pcie_phy_power_on,
+	.power_off	= rockchip_pcie_phy_power_off,
+	.owner		= THIS_MODULE,
+};
+
+static const struct rockchip_pcie_data rk3399_pcie_data = {
+	.pcie_conf = 0xe220,
+	.pcie_status = 0xe2a4,
+	.pcie_laneoff = 0xe214,
+};
+
+static const struct of_device_id rockchip_pcie_phy_dt_ids[] = {
+	{
+		.compatible = "rockchip,rk3399-pcie-phy",
+		.data = &rk3399_pcie_data,
+	},
+	{}
+};
+
+MODULE_DEVICE_TABLE(of, rockchip_pcie_phy_dt_ids);
+
+static int rockchip_pcie_phy_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct rockchip_pcie_phy *rk_phy;
+	struct phy *generic_phy;
+	struct phy_provider *phy_provider;
+	struct regmap *grf;
+	const struct of_device_id *of_id;
+
+	grf = syscon_node_to_regmap(dev->parent->of_node);
+	if (IS_ERR(grf)) {
+		dev_err(dev, "Cannot find GRF syscon\n");
+		return PTR_ERR(grf);
+	}
+
+	rk_phy = devm_kzalloc(dev, sizeof(*rk_phy), GFP_KERNEL);
+	if (!rk_phy)
+		return -ENOMEM;
+
+	of_id = of_match_device(rockchip_pcie_phy_dt_ids, &pdev->dev);
+	if (!of_id)
+		return -EINVAL;
+
+	rk_phy->phy_data = (struct rockchip_pcie_data *)of_id->data;
+	rk_phy->reg_base = grf;
+
+	rk_phy->phy_rst = devm_reset_control_get(dev, "phy");
+	if (IS_ERR(rk_phy->phy_rst)) {
+		if (PTR_ERR(rk_phy->phy_rst) != -EPROBE_DEFER)
+			dev_err(dev,
+				"missing phy property for reset controller\n");
+		return PTR_ERR(rk_phy->phy_rst);
+	}
+
+	rk_phy->clk_pciephy_ref = devm_clk_get(dev, "refclk");
+	if (IS_ERR(rk_phy->clk_pciephy_ref)) {
+		dev_err(dev, "refclk not found.\n");
+		return PTR_ERR(rk_phy->clk_pciephy_ref);
+	}
+
+	generic_phy = devm_phy_create(dev, dev->of_node, &ops);
+	if (IS_ERR(generic_phy)) {
+		dev_err(dev, "failed to create PHY\n");
+		return PTR_ERR(generic_phy);
+	}
+
+	phy_set_drvdata(generic_phy, rk_phy);
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+	return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static struct platform_driver rockchip_pcie_driver = {
+	.probe		= rockchip_pcie_phy_probe,
+	.driver		= {
+		.name	= "rockchip-pcie-phy",
+		.of_match_table = rockchip_pcie_phy_dt_ids,
+	},
+};
+
+module_platform_driver(rockchip_pcie_driver);
+
+MODULE_AUTHOR("Shawn Lin <shawn.lin@rock-chips.com>");
+MODULE_DESCRIPTION("Rockchip PCIe PHY driver");
+MODULE_LICENSE("GPL v2");

drivers/phy/phy-rockchip-typec.c

@@ -0,0 +1,1023 @@
+/*
+ * Copyright (C) Fuzhou Rockchip Electronics Co.Ltd
+ * Author: Chris Zhong <zyw@rock-chips.com>
+ *         Kever Yang <kever.yang@rock-chips.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * The ROCKCHIP Type-C PHY has two PLL clocks. The first PLL clock
+ * is used for USB3, the second PLL clock is used for DP. This Type-C PHY has
+ * 3 working modes: USB3 only mode, DP only mode, and USB3+DP mode.
+ * At USB3 only mode, both PLL clocks need to be initialized, this allows the
+ * PHY to switch mode between USB3 and USB3+DP, without disconnecting the USB
+ * device.
+ * In The DP only mode, only the DP PLL needs to be powered on, and the 4 lanes
+ * are all used for DP.
+ *
+ * This driver gets extcon cable state and property, then decides which mode to
+ * select:
+ *
+ * 1. USB3 only mode:
+ *    EXTCON_USB or EXTCON_USB_HOST state is true, and
+ *    EXTCON_PROP_USB_SS property is true.
+ *    EXTCON_DISP_DP state is false.
+ *
+ * 2. DP only mode:
+ *    EXTCON_DISP_DP state is true, and
+ *    EXTCON_PROP_USB_SS property is false.
+ *    If EXTCON_USB_HOST state is true, it is DP + USB2 mode, since the USB2 phy
+ *    is a separate phy, so this case is still DP only mode.
+ *
+ * 3. USB3+DP mode:
+ *    EXTCON_USB_HOST and EXTCON_DISP_DP are both true, and
+ *    EXTCON_PROP_USB_SS property is true.
+ *
+ * This Type-C PHY driver supports normal and flip orientation. The orientation
+ * is reported by the EXTCON_PROP_USB_TYPEC_POLARITY property: true is flip
+ * orientation, false is normal orientation.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/extcon.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+
+#include <linux/mfd/syscon.h>
+#include <linux/phy/phy.h>
+
+#define CMN_SSM_BANDGAP			(0x21 << 2)
+#define CMN_SSM_BIAS			(0x22 << 2)
+#define CMN_PLLSM0_PLLEN		(0x29 << 2)
+#define CMN_PLLSM0_PLLPRE		(0x2a << 2)
+#define CMN_PLLSM0_PLLVREF		(0x2b << 2)
+#define CMN_PLLSM0_PLLLOCK		(0x2c << 2)
+#define CMN_PLLSM1_PLLEN		(0x31 << 2)
+#define CMN_PLLSM1_PLLPRE		(0x32 << 2)
+#define CMN_PLLSM1_PLLVREF		(0x33 << 2)
+#define CMN_PLLSM1_PLLLOCK		(0x34 << 2)
+#define CMN_PLLSM1_USER_DEF_CTRL	(0x37 << 2)
+#define CMN_ICAL_OVRD			(0xc1 << 2)
+#define CMN_PLL0_VCOCAL_OVRD		(0x83 << 2)
+#define CMN_PLL0_VCOCAL_INIT		(0x84 << 2)
+#define CMN_PLL0_VCOCAL_ITER		(0x85 << 2)
+#define CMN_PLL0_LOCK_REFCNT_START	(0x90 << 2)
+#define CMN_PLL0_LOCK_PLLCNT_START	(0x92 << 2)
+#define CMN_PLL0_LOCK_PLLCNT_THR	(0x93 << 2)
+#define CMN_PLL0_INTDIV			(0x94 << 2)
+#define CMN_PLL0_FRACDIV		(0x95 << 2)
+#define CMN_PLL0_HIGH_THR		(0x96 << 2)
+#define CMN_PLL0_DSM_DIAG		(0x97 << 2)
+#define CMN_PLL0_SS_CTRL1		(0x98 << 2)
+#define CMN_PLL0_SS_CTRL2		(0x99 << 2)
+#define CMN_PLL1_VCOCAL_START		(0xa1 << 2)
+#define CMN_PLL1_VCOCAL_OVRD		(0xa3 << 2)
+#define CMN_PLL1_VCOCAL_INIT		(0xa4 << 2)
+#define CMN_PLL1_VCOCAL_ITER		(0xa5 << 2)
+#define CMN_PLL1_LOCK_REFCNT_START	(0xb0 << 2)
+#define CMN_PLL1_LOCK_PLLCNT_START	(0xb2 << 2)
+#define CMN_PLL1_LOCK_PLLCNT_THR	(0xb3 << 2)
+#define CMN_PLL1_INTDIV			(0xb4 << 2)
+#define CMN_PLL1_FRACDIV		(0xb5 << 2)
+#define CMN_PLL1_HIGH_THR		(0xb6 << 2)
+#define CMN_PLL1_DSM_DIAG		(0xb7 << 2)
+#define CMN_PLL1_SS_CTRL1		(0xb8 << 2)
+#define CMN_PLL1_SS_CTRL2		(0xb9 << 2)
+#define CMN_RXCAL_OVRD			(0xd1 << 2)
+#define CMN_TXPUCAL_CTRL		(0xe0 << 2)
+#define CMN_TXPUCAL_OVRD		(0xe1 << 2)
+#define CMN_TXPDCAL_OVRD		(0xf1 << 2)
+#define CMN_DIAG_PLL0_FBH_OVRD		(0x1c0 << 2)
+#define CMN_DIAG_PLL0_FBL_OVRD		(0x1c1 << 2)
+#define CMN_DIAG_PLL0_OVRD		(0x1c2 << 2)
+#define CMN_DIAG_PLL0_V2I_TUNE		(0x1c5 << 2)
+#define CMN_DIAG_PLL0_CP_TUNE		(0x1c6 << 2)
+#define CMN_DIAG_PLL0_LF_PROG		(0x1c7 << 2)
+#define CMN_DIAG_PLL1_FBH_OVRD		(0x1d0 << 2)
+#define CMN_DIAG_PLL1_FBL_OVRD		(0x1d1 << 2)
+#define CMN_DIAG_PLL1_OVRD		(0x1d2 << 2)
+#define CMN_DIAG_PLL1_V2I_TUNE		(0x1d5 << 2)
+#define CMN_DIAG_PLL1_CP_TUNE		(0x1d6 << 2)
+#define CMN_DIAG_PLL1_LF_PROG		(0x1d7 << 2)
+#define CMN_DIAG_PLL1_PTATIS_TUNE1	(0x1d8 << 2)
+#define CMN_DIAG_PLL1_PTATIS_TUNE2	(0x1d9 << 2)
+#define CMN_DIAG_PLL1_INCLK_CTRL	(0x1da << 2)
+#define CMN_DIAG_HSCLK_SEL		(0x1e0 << 2)
+
+#define XCVR_PSM_RCTRL(n)		((0x4001 | ((n) << 9)) << 2)
+#define XCVR_PSM_CAL_TMR(n)		((0x4002 | ((n) << 9)) << 2)
+#define XCVR_PSM_A0IN_TMR(n)		((0x4003 | ((n) << 9)) << 2)
+#define TX_TXCC_CAL_SCLR_MULT(n)	((0x4047 | ((n) << 9)) << 2)
+#define TX_TXCC_CPOST_MULT_00(n)	((0x404c | ((n) << 9)) << 2)
+#define TX_TXCC_CPOST_MULT_01(n)	((0x404d | ((n) << 9)) << 2)
+#define TX_TXCC_CPOST_MULT_10(n)	((0x404e | ((n) << 9)) << 2)
+#define TX_TXCC_CPOST_MULT_11(n)	((0x404f | ((n) << 9)) << 2)
+#define TX_TXCC_MGNFS_MULT_000(n)	((0x4050 | ((n) << 9)) << 2)
+#define TX_TXCC_MGNFS_MULT_001(n)	((0x4051 | ((n) << 9)) << 2)
+#define TX_TXCC_MGNFS_MULT_010(n)	((0x4052 | ((n) << 9)) << 2)
+#define TX_TXCC_MGNFS_MULT_011(n)	((0x4053 | ((n) << 9)) << 2)
+#define TX_TXCC_MGNFS_MULT_100(n)	((0x4054 | ((n) << 9)) << 2)
+#define TX_TXCC_MGNFS_MULT_101(n)	((0x4055 | ((n) << 9)) << 2)
+#define TX_TXCC_MGNFS_MULT_110(n)	((0x4056 | ((n) << 9)) << 2)
+#define TX_TXCC_MGNFS_MULT_111(n)	((0x4057 | ((n) << 9)) << 2)
+#define XCVR_DIAG_PLLDRC_CTRL(n)	((0x40e0 | ((n) << 9)) << 2)
+#define XCVR_DIAG_BIDI_CTRL(n)		((0x40e8 | ((n) << 9)) << 2)
+#define XCVR_DIAG_LANE_FCM_EN_MGN(n)	((0x40f2 | ((n) << 9)) << 2)
+#define TX_PSC_A0(n)			((0x4100 | ((n) << 9)) << 2)
+#define TX_PSC_A1(n)			((0x4101 | ((n) << 9)) << 2)
+#define TX_PSC_A2(n)			((0x4102 | ((n) << 9)) << 2)
+#define TX_PSC_A3(n)			((0x4103 | ((n) << 9)) << 2)
+#define TX_RCVDET_CTRL(n)		((0x4120 | ((n) << 9)) << 2)
+#define TX_RCVDET_EN_TMR(n)		((0x4122 | ((n) << 9)) << 2)
+#define TX_RCVDET_ST_TMR(n)		((0x4123 | ((n) << 9)) << 2)
+#define TX_DIAG_TX_DRV(n)		((0x41e1 | ((n) << 9)) << 2)
+#define TX_DIAG_BGREF_PREDRV_DELAY	(0x41e7 << 2)
+#define TX_ANA_CTRL_REG_1		(0x5020 << 2)
+#define TX_ANA_CTRL_REG_2		(0x5021 << 2)
+#define TXDA_COEFF_CALC_CTRL		(0x5022 << 2)
+#define TX_DIG_CTRL_REG_2		(0x5024 << 2)
+#define TXDA_CYA_AUXDA_CYA		(0x5025 << 2)
+#define TX_ANA_CTRL_REG_3		(0x5026 << 2)
+#define TX_ANA_CTRL_REG_4		(0x5027 << 2)
+#define TX_ANA_CTRL_REG_5		(0x5029 << 2)
+
+#define RX_PSC_A0(n)			((0x8000 | ((n) << 9)) << 2)
+#define RX_PSC_A1(n)			((0x8001 | ((n) << 9)) << 2)
+#define RX_PSC_A2(n)			((0x8002 | ((n) << 9)) << 2)
+#define RX_PSC_A3(n)			((0x8003 | ((n) << 9)) << 2)
+#define RX_PSC_CAL(n)			((0x8006 | ((n) << 9)) << 2)
+#define RX_PSC_RDY(n)			((0x8007 | ((n) << 9)) << 2)
+#define RX_IQPI_ILL_CAL_OVRD		(0x8023 << 2)
+#define RX_EPI_ILL_CAL_OVRD		(0x8033 << 2)
+#define RX_SDCAL0_OVRD			(0x8041 << 2)
+#define RX_SDCAL1_OVRD			(0x8049 << 2)
+#define RX_SLC_INIT			(0x806d << 2)
+#define RX_SLC_RUN			(0x806e << 2)
+#define RX_CDRLF_CNFG2			(0x8081 << 2)
+#define RX_SIGDET_HL_FILT_TMR(n)	((0x8090 | ((n) << 9)) << 2)
+#define RX_SLC_IOP0_OVRD		(0x8101 << 2)
+#define RX_SLC_IOP1_OVRD		(0x8105 << 2)
+#define RX_SLC_QOP0_OVRD		(0x8109 << 2)
+#define RX_SLC_QOP1_OVRD		(0x810d << 2)
+#define RX_SLC_EOP0_OVRD		(0x8111 << 2)
+#define RX_SLC_EOP1_OVRD		(0x8115 << 2)
+#define RX_SLC_ION0_OVRD		(0x8119 << 2)
+#define RX_SLC_ION1_OVRD		(0x811d << 2)
+#define RX_SLC_QON0_OVRD		(0x8121 << 2)
+#define RX_SLC_QON1_OVRD		(0x8125 << 2)
+#define RX_SLC_EON0_OVRD		(0x8129 << 2)
+#define RX_SLC_EON1_OVRD		(0x812d << 2)
+#define RX_SLC_IEP0_OVRD		(0x8131 << 2)
+#define RX_SLC_IEP1_OVRD		(0x8135 << 2)
+#define RX_SLC_QEP0_OVRD		(0x8139 << 2)
+#define RX_SLC_QEP1_OVRD		(0x813d << 2)
+#define RX_SLC_EEP0_OVRD		(0x8141 << 2)
+#define RX_SLC_EEP1_OVRD		(0x8145 << 2)
+#define RX_SLC_IEN0_OVRD		(0x8149 << 2)
+#define RX_SLC_IEN1_OVRD		(0x814d << 2)
+#define RX_SLC_QEN0_OVRD		(0x8151 << 2)
+#define RX_SLC_QEN1_OVRD		(0x8155 << 2)
+#define RX_SLC_EEN0_OVRD		(0x8159 << 2)
+#define RX_SLC_EEN1_OVRD		(0x815d << 2)
+#define RX_REE_CTRL_DATA_MASK(n)	((0x81bb | ((n) << 9)) << 2)
+#define RX_DIAG_SIGDET_TUNE(n)		((0x81dc | ((n) << 9)) << 2)
+#define RX_DIAG_SC2C_DELAY		(0x81e1 << 2)
+
+#define PMA_LANE_CFG			(0xc000 << 2)
+#define PIPE_CMN_CTRL1			(0xc001 << 2)
+#define PIPE_CMN_CTRL2			(0xc002 << 2)
+#define PIPE_COM_LOCK_CFG1		(0xc003 << 2)
+#define PIPE_COM_LOCK_CFG2		(0xc004 << 2)
+#define PIPE_RCV_DET_INH		(0xc005 << 2)
+#define DP_MODE_CTL			(0xc008 << 2)
+#define DP_CLK_CTL			(0xc009 << 2)
+#define STS				(0xc00F << 2)
+#define PHY_ISO_CMN_CTRL		(0xc010 << 2)
+#define PHY_DP_TX_CTL			(0xc408 << 2)
+#define PMA_CMN_CTRL1			(0xc800 << 2)
+#define PHY_PMA_ISO_CMN_CTRL		(0xc810 << 2)
+#define PHY_ISOLATION_CTRL		(0xc81f << 2)
+#define PHY_PMA_ISO_XCVR_CTRL(n)	((0xcc11 | ((n) << 6)) << 2)
+#define PHY_PMA_ISO_LINK_MODE(n)	((0xcc12 | ((n) << 6)) << 2)
+#define PHY_PMA_ISO_PWRST_CTRL(n)	((0xcc13 | ((n) << 6)) << 2)
+#define PHY_PMA_ISO_TX_DATA_LO(n)	((0xcc14 | ((n) << 6)) << 2)
+#define PHY_PMA_ISO_TX_DATA_HI(n)	((0xcc15 | ((n) << 6)) << 2)
+#define PHY_PMA_ISO_RX_DATA_LO(n)	((0xcc16 | ((n) << 6)) << 2)
+#define PHY_PMA_ISO_RX_DATA_HI(n)	((0xcc17 | ((n) << 6)) << 2)
+#define TX_BIST_CTRL(n)			((0x4140 | ((n) << 9)) << 2)
+#define TX_BIST_UDDWR(n)		((0x4141 | ((n) << 9)) << 2)
+
+/*
+ * Selects which PLL clock will be driven on the analog high speed
+ * clock 0: PLL 0 div 1
+ * clock 1: PLL 1 div 2
+ */
+#define CLK_PLL_CONFIG			0X30
+#define CLK_PLL_MASK			0x33
+
+#define CMN_READY			BIT(0)
+
+#define DP_PLL_CLOCK_ENABLE		BIT(2)
+#define DP_PLL_ENABLE			BIT(0)
+#define DP_PLL_DATA_RATE_RBR		((2 << 12) | (4 << 8))
+#define DP_PLL_DATA_RATE_HBR		((2 << 12) | (4 << 8))
+#define DP_PLL_DATA_RATE_HBR2		((1 << 12) | (2 << 8))
+
+#define DP_MODE_A0			BIT(4)
+#define DP_MODE_A2			BIT(6)
+#define DP_MODE_ENTER_A0		0xc101
+#define DP_MODE_ENTER_A2		0xc104
+
+#define PHY_MODE_SET_TIMEOUT		100000
+
+#define PIN_ASSIGN_C_E			0x51d9
+#define PIN_ASSIGN_D_F			0x5100
+
+#define MODE_DISCONNECT			0
+#define MODE_UFP_USB			BIT(0)
+#define MODE_DFP_USB			BIT(1)
+#define MODE_DFP_DP			BIT(2)
+
+struct usb3phy_reg {
+	u32 offset;
+	u32 enable_bit;
+	u32 write_enable;
+};
+
+struct rockchip_usb3phy_port_cfg {
+	struct usb3phy_reg typec_conn_dir;
+	struct usb3phy_reg usb3tousb2_en;
+	struct usb3phy_reg external_psm;
+	struct usb3phy_reg pipe_status;
+};
+
+struct rockchip_typec_phy {
+	struct device *dev;
+	void __iomem *base;
+	struct extcon_dev *extcon;
+	struct regmap *grf_regs;
+	struct clk *clk_core;
+	struct clk *clk_ref;
+	struct reset_control *uphy_rst;
+	struct reset_control *pipe_rst;
+	struct reset_control *tcphy_rst;
+	struct rockchip_usb3phy_port_cfg port_cfgs;
+	/* mutex to protect access to individual PHYs */
+	struct mutex lock;
+
+	bool flip;
+	u8 mode;
+};
+
+struct phy_reg {
+	u16 value;
+	u32 addr;
+};
+
+struct phy_reg usb3_pll_cfg[] = {
+	{ 0xf0,		CMN_PLL0_VCOCAL_INIT },
+	{ 0x18,		CMN_PLL0_VCOCAL_ITER },
+	{ 0xd0,		CMN_PLL0_INTDIV },
+	{ 0x4a4a,	CMN_PLL0_FRACDIV },
+	{ 0x34,		CMN_PLL0_HIGH_THR },
+	{ 0x1ee,	CMN_PLL0_SS_CTRL1 },
+	{ 0x7f03,	CMN_PLL0_SS_CTRL2 },
+	{ 0x20,		CMN_PLL0_DSM_DIAG },
+	{ 0,		CMN_DIAG_PLL0_OVRD },
+	{ 0,		CMN_DIAG_PLL0_FBH_OVRD },
+	{ 0,		CMN_DIAG_PLL0_FBL_OVRD },
+	{ 0x7,		CMN_DIAG_PLL0_V2I_TUNE },
+	{ 0x45,		CMN_DIAG_PLL0_CP_TUNE },
+	{ 0x8,		CMN_DIAG_PLL0_LF_PROG },
+};
+
+struct phy_reg dp_pll_cfg[] = {
+	{ 0xf0,		CMN_PLL1_VCOCAL_INIT },
+	{ 0x18,		CMN_PLL1_VCOCAL_ITER },
+	{ 0x30b9,	CMN_PLL1_VCOCAL_START },
+	{ 0x21c,	CMN_PLL1_INTDIV },
+	{ 0,		CMN_PLL1_FRACDIV },
+	{ 0x5,		CMN_PLL1_HIGH_THR },
+	{ 0x35,		CMN_PLL1_SS_CTRL1 },
+	{ 0x7f1e,	CMN_PLL1_SS_CTRL2 },
+	{ 0x20,		CMN_PLL1_DSM_DIAG },
+	{ 0,		CMN_PLLSM1_USER_DEF_CTRL },
+	{ 0,		CMN_DIAG_PLL1_OVRD },
+	{ 0,		CMN_DIAG_PLL1_FBH_OVRD },
+	{ 0,		CMN_DIAG_PLL1_FBL_OVRD },
+	{ 0x6,		CMN_DIAG_PLL1_V2I_TUNE },
+	{ 0x45,		CMN_DIAG_PLL1_CP_TUNE },
+	{ 0x8,		CMN_DIAG_PLL1_LF_PROG },
+	{ 0x100,	CMN_DIAG_PLL1_PTATIS_TUNE1 },
+	{ 0x7,		CMN_DIAG_PLL1_PTATIS_TUNE2 },
+	{ 0x4,		CMN_DIAG_PLL1_INCLK_CTRL },
+};
+
+static void tcphy_cfg_24m(struct rockchip_typec_phy *tcphy)
+{
+	u32 i, rdata;
+
+	/*
+	 * cmn_ref_clk_sel = 3, select the 24Mhz for clk parent
+	 * cmn_psm_clk_dig_div = 2, set the clk division to 2
+	 */
+	writel(0x830, tcphy->base + PMA_CMN_CTRL1);
+	for (i = 0; i < 4; i++) {
+		/*
+		 * The following PHY configuration assumes a 24 MHz reference
+		 * clock.
+		 */
+		writel(0x90, tcphy->base + XCVR_DIAG_LANE_FCM_EN_MGN(i));
+		writel(0x960, tcphy->base + TX_RCVDET_EN_TMR(i));
+		writel(0x30, tcphy->base + TX_RCVDET_ST_TMR(i));
+	}
+
+	rdata = readl(tcphy->base + CMN_DIAG_HSCLK_SEL);
+	rdata &= ~CLK_PLL_MASK;
+	rdata |= CLK_PLL_CONFIG;
+	writel(rdata, tcphy->base + CMN_DIAG_HSCLK_SEL);
+}
+
+static void tcphy_cfg_usb3_pll(struct rockchip_typec_phy *tcphy)
+{
+	u32 i;
+
+	/* load the configuration of PLL0 */
+	for (i = 0; i < ARRAY_SIZE(usb3_pll_cfg); i++)
+		writel(usb3_pll_cfg[i].value,
+		       tcphy->base + usb3_pll_cfg[i].addr);
+}
+
+static void tcphy_cfg_dp_pll(struct rockchip_typec_phy *tcphy)
+{
+	u32 i;
+
+	/* set the default mode to RBR */
+	writel(DP_PLL_CLOCK_ENABLE | DP_PLL_ENABLE | DP_PLL_DATA_RATE_RBR,
+	       tcphy->base + DP_CLK_CTL);
+
+	/* load the configuration of PLL1 */
+	for (i = 0; i < ARRAY_SIZE(dp_pll_cfg); i++)
+		writel(dp_pll_cfg[i].value, tcphy->base + dp_pll_cfg[i].addr);
+}
+
+static void tcphy_tx_usb3_cfg_lane(struct rockchip_typec_phy *tcphy, u32 lane)
+{
+	writel(0x7799, tcphy->base + TX_PSC_A0(lane));
+	writel(0x7798, tcphy->base + TX_PSC_A1(lane));
+	writel(0x5098, tcphy->base + TX_PSC_A2(lane));
+	writel(0x5098, tcphy->base + TX_PSC_A3(lane));
+	writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_000(lane));
+	writel(0xbf, tcphy->base + XCVR_DIAG_BIDI_CTRL(lane));
+}
+
+static void tcphy_rx_usb3_cfg_lane(struct rockchip_typec_phy *tcphy, u32 lane)
+{
+	writel(0xa6fd, tcphy->base + RX_PSC_A0(lane));
+	writel(0xa6fd, tcphy->base + RX_PSC_A1(lane));
+	writel(0xa410, tcphy->base + RX_PSC_A2(lane));
+	writel(0x2410, tcphy->base + RX_PSC_A3(lane));
+	writel(0x23ff, tcphy->base + RX_PSC_CAL(lane));
+	writel(0x13, tcphy->base + RX_SIGDET_HL_FILT_TMR(lane));
+	writel(0x03e7, tcphy->base + RX_REE_CTRL_DATA_MASK(lane));
+	writel(0x1004, tcphy->base + RX_DIAG_SIGDET_TUNE(lane));
+	writel(0x2010, tcphy->base + RX_PSC_RDY(lane));
+	writel(0xfb, tcphy->base + XCVR_DIAG_BIDI_CTRL(lane));
+}
+
+static void tcphy_dp_cfg_lane(struct rockchip_typec_phy *tcphy, u32 lane)
+{
+	u16 rdata;
+
+	writel(0xbefc, tcphy->base + XCVR_PSM_RCTRL(lane));
+	writel(0x6799, tcphy->base + TX_PSC_A0(lane));
+	writel(0x6798, tcphy->base + TX_PSC_A1(lane));
+	writel(0x98, tcphy->base + TX_PSC_A2(lane));
+	writel(0x98, tcphy->base + TX_PSC_A3(lane));
+
+	writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_000(lane));
+	writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_001(lane));
+	writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_010(lane));
+	writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_011(lane));
+	writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_100(lane));
+	writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_101(lane));
+	writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_110(lane));
+	writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_111(lane));
+	writel(0, tcphy->base + TX_TXCC_CPOST_MULT_10(lane));
+	writel(0, tcphy->base + TX_TXCC_CPOST_MULT_01(lane));
+	writel(0, tcphy->base + TX_TXCC_CPOST_MULT_00(lane));
+	writel(0, tcphy->base + TX_TXCC_CPOST_MULT_11(lane));
+
+	writel(0x128, tcphy->base + TX_TXCC_CAL_SCLR_MULT(lane));
+	writel(0x400, tcphy->base + TX_DIAG_TX_DRV(lane));
+
+	rdata = readl(tcphy->base + XCVR_DIAG_PLLDRC_CTRL(lane));
+	rdata = (rdata & 0x8fff) | 0x6000;
+	writel(rdata, tcphy->base + XCVR_DIAG_PLLDRC_CTRL(lane));
+}
+
+static inline int property_enable(struct rockchip_typec_phy *tcphy,
+				  const struct usb3phy_reg *reg, bool en)
+{
+	u32 mask = 1 << reg->write_enable;
+	u32 val = en << reg->enable_bit;
+
+	return regmap_write(tcphy->grf_regs, reg->offset, val | mask);
+}
+
+static void tcphy_dp_aux_calibration(struct rockchip_typec_phy *tcphy)
+{
+	u16 rdata, rdata2, val;
+
+	/* disable txda_cal_latch_en for rewrite the calibration values */
+	rdata = readl(tcphy->base + TX_ANA_CTRL_REG_1);
+	val = rdata & 0xdfff;
+	writel(val, tcphy->base + TX_ANA_CTRL_REG_1);
+
+	/*
+	 * read a resistor calibration code from CMN_TXPUCAL_CTRL[6:0] and
+	 * write it to TX_DIG_CTRL_REG_2[6:0], and delay 1ms to make sure it
+	 * works.
+	 */
+	rdata = readl(tcphy->base + TX_DIG_CTRL_REG_2);
+	rdata = rdata & 0xffc0;
+
+	rdata2 = readl(tcphy->base + CMN_TXPUCAL_CTRL);
+	rdata2 = rdata2 & 0x3f;
+
+	val = rdata | rdata2;
+	writel(val, tcphy->base + TX_DIG_CTRL_REG_2);
+	usleep_range(1000, 1050);
+
+	/*
+	 * Enable signal for latch that sample and holds calibration values.
+	 * Activate this signal for 1 clock cycle to sample new calibration
+	 * values.
+	 */
+	rdata = readl(tcphy->base + TX_ANA_CTRL_REG_1);
+	val = rdata | 0x2000;
+	writel(val, tcphy->base + TX_ANA_CTRL_REG_1);
+	usleep_range(150, 200);
+
+	/* set TX Voltage Level and TX Deemphasis to 0 */
+	writel(0, tcphy->base + PHY_DP_TX_CTL);
+	/* re-enable decap */
+	writel(0x100, tcphy->base + TX_ANA_CTRL_REG_2);
+	writel(0x300, tcphy->base + TX_ANA_CTRL_REG_2);
+	writel(0x2008, tcphy->base + TX_ANA_CTRL_REG_1);
+	writel(0x2018, tcphy->base + TX_ANA_CTRL_REG_1);
+
+	writel(0, tcphy->base + TX_ANA_CTRL_REG_5);
+
+	/*
+	 * Programs txda_drv_ldo_prog[15:0], Sets driver LDO
+	 * voltage 16'h1001 for DP-AUX-TX and RX
+	 */
+	writel(0x1001, tcphy->base + TX_ANA_CTRL_REG_4);
+
+	/* re-enables Bandgap reference for LDO */
+	writel(0x2098, tcphy->base + TX_ANA_CTRL_REG_1);
+	writel(0x2198, tcphy->base + TX_ANA_CTRL_REG_1);
+
+	/*
+	 * re-enables the transmitter pre-driver, driver data selection MUX,
+	 * and receiver detect circuits.
+	 */
+	writel(0x301, tcphy->base + TX_ANA_CTRL_REG_2);
+	writel(0x303, tcphy->base + TX_ANA_CTRL_REG_2);
+
+	/*
+	 * BIT 12: Controls auxda_polarity, which selects the polarity of the
+	 * xcvr:
+	 * 1, Reverses the polarity (If TYPEC, Pulls ups aux_p and pull
+	 * down aux_m)
+	 * 0, Normal polarity (if TYPE_C, pulls up aux_m and pulls down
+	 * aux_p)
+	 */
+	val = 0xa078;
+	if (!tcphy->flip)
+		val |= BIT(12);
+	writel(val, tcphy->base + TX_ANA_CTRL_REG_1);
+
+	writel(0, tcphy->base + TX_ANA_CTRL_REG_3);
+	writel(0, tcphy->base + TX_ANA_CTRL_REG_4);
+	writel(0, tcphy->base + TX_ANA_CTRL_REG_5);
+
+	/*
+	 * Controls low_power_swing_en, set the voltage swing of the driver
+	 * to 400mv. The values	below are peak to peak (differential) values.
+	 */
+	writel(4, tcphy->base + TXDA_COEFF_CALC_CTRL);
+	writel(0, tcphy->base + TXDA_CYA_AUXDA_CYA);
+
+	/* Controls tx_high_z_tm_en */
+	val = readl(tcphy->base + TX_DIG_CTRL_REG_2);
+	val |= BIT(15);
+	writel(val, tcphy->base + TX_DIG_CTRL_REG_2);
+}
+
+static int tcphy_phy_init(struct rockchip_typec_phy *tcphy, u8 mode)
+{
+	struct rockchip_usb3phy_port_cfg *cfg = &tcphy->port_cfgs;
+	int ret, i;
+	u32 val;
+
+	ret = clk_prepare_enable(tcphy->clk_core);
+	if (ret) {
+		dev_err(tcphy->dev, "Failed to prepare_enable core clock\n");
+		return ret;
+	}
+
+	ret = clk_prepare_enable(tcphy->clk_ref);
+	if (ret) {
+		dev_err(tcphy->dev, "Failed to prepare_enable ref clock\n");
+		goto err_clk_core;
+	}
+
+	reset_control_deassert(tcphy->tcphy_rst);
+
+	property_enable(tcphy, &cfg->typec_conn_dir, tcphy->flip);
+
+	tcphy_cfg_24m(tcphy);
+
+	if (mode == MODE_DFP_DP) {
+		tcphy_cfg_dp_pll(tcphy);
+		for (i = 0; i < 4; i++)
+			tcphy_dp_cfg_lane(tcphy, i);
+
+		writel(PIN_ASSIGN_C_E, tcphy->base + PMA_LANE_CFG);
+	} else {
+		tcphy_cfg_usb3_pll(tcphy);
+		tcphy_cfg_dp_pll(tcphy);
+		if (tcphy->flip) {
+			tcphy_tx_usb3_cfg_lane(tcphy, 3);
+			tcphy_rx_usb3_cfg_lane(tcphy, 2);
+			tcphy_dp_cfg_lane(tcphy, 0);
+			tcphy_dp_cfg_lane(tcphy, 1);
+		} else {
+			tcphy_tx_usb3_cfg_lane(tcphy, 0);
+			tcphy_rx_usb3_cfg_lane(tcphy, 1);
+			tcphy_dp_cfg_lane(tcphy, 2);
+			tcphy_dp_cfg_lane(tcphy, 3);
+		}
+
+		writel(PIN_ASSIGN_D_F, tcphy->base + PMA_LANE_CFG);
+	}
+
+	writel(DP_MODE_ENTER_A2, tcphy->base + DP_MODE_CTL);
+
+	reset_control_deassert(tcphy->uphy_rst);
+
+	ret = readx_poll_timeout(readl, tcphy->base + PMA_CMN_CTRL1,
+				 val, val & CMN_READY, 10,
+				 PHY_MODE_SET_TIMEOUT);
+	if (ret < 0) {
+		dev_err(tcphy->dev, "wait pma ready timeout\n");
+		ret = -ETIMEDOUT;
+		goto err_wait_pma;
+	}
+
+	reset_control_deassert(tcphy->pipe_rst);
+
+	return 0;
+
+err_wait_pma:
+	reset_control_assert(tcphy->uphy_rst);
+	reset_control_assert(tcphy->tcphy_rst);
+	clk_disable_unprepare(tcphy->clk_ref);
+err_clk_core:
+	clk_disable_unprepare(tcphy->clk_core);
+	return ret;
+}
+
+static void tcphy_phy_deinit(struct rockchip_typec_phy *tcphy)
+{
+	reset_control_assert(tcphy->tcphy_rst);
+	reset_control_assert(tcphy->uphy_rst);
+	reset_control_assert(tcphy->pipe_rst);
+	clk_disable_unprepare(tcphy->clk_core);
+	clk_disable_unprepare(tcphy->clk_ref);
+}
+
+static int tcphy_get_mode(struct rockchip_typec_phy *tcphy)
+{
+	struct extcon_dev *edev = tcphy->extcon;
+	union extcon_property_value property;
+	unsigned int id;
+	bool dfp, ufp, dp;
+	u8 mode;
+	int ret;
+
+	ufp = extcon_get_state(edev, EXTCON_USB);
+	dfp = extcon_get_state(edev, EXTCON_USB_HOST);
+	dp = extcon_get_state(edev, EXTCON_DISP_DP);
+
+	mode = MODE_DFP_USB;
+	id = EXTCON_USB_HOST;
+
+	if (ufp) {
+		mode = MODE_UFP_USB;
+		id = EXTCON_USB;
+	} else if (dp) {
+		mode = MODE_DFP_DP;
+		id = EXTCON_DISP_DP;
+
+		ret = extcon_get_property(edev, id, EXTCON_PROP_USB_SS,
+					  &property);
+		if (ret) {
+			dev_err(tcphy->dev, "get superspeed property failed\n");
+			return ret;
+		}
+
+		if (property.intval)
+			mode |= MODE_DFP_USB;
+	}
+
+	ret = extcon_get_property(edev, id, EXTCON_PROP_USB_TYPEC_POLARITY,
+				  &property);
+	if (ret) {
+		dev_err(tcphy->dev, "get polarity property failed\n");
+		return ret;
+	}
+
+	tcphy->flip = property.intval ? 1 : 0;
+
+	return mode;
+}
+
+static int rockchip_usb3_phy_power_on(struct phy *phy)
+{
+	struct rockchip_typec_phy *tcphy = phy_get_drvdata(phy);
+	struct rockchip_usb3phy_port_cfg *cfg = &tcphy->port_cfgs;
+	const struct usb3phy_reg *reg = &cfg->pipe_status;
+	int timeout, new_mode, ret = 0;
+	u32 val;
+
+	mutex_lock(&tcphy->lock);
+
+	new_mode = tcphy_get_mode(tcphy);
+	if (new_mode < 0) {
+		ret = new_mode;
+		goto unlock_ret;
+	}
+
+	/* DP-only mode; fall back to USB2 */
+	if (!(new_mode & (MODE_DFP_USB | MODE_UFP_USB)))
+		goto unlock_ret;
+
+	if (tcphy->mode == new_mode)
+		goto unlock_ret;
+
+	if (tcphy->mode == MODE_DISCONNECT)
+		tcphy_phy_init(tcphy, new_mode);
+
+	/* wait TCPHY for pipe ready */
+	for (timeout = 0; timeout < 100; timeout++) {
+		regmap_read(tcphy->grf_regs, reg->offset, &val);
+		if (!(val & BIT(reg->enable_bit))) {
+			tcphy->mode |= new_mode & (MODE_DFP_USB | MODE_UFP_USB);
+			goto unlock_ret;
+		}
+		usleep_range(10, 20);
+	}
+
+	if (tcphy->mode == MODE_DISCONNECT)
+		tcphy_phy_deinit(tcphy);
+
+	ret = -ETIMEDOUT;
+
+unlock_ret:
+	mutex_unlock(&tcphy->lock);
+	return ret;
+}
+
+static int rockchip_usb3_phy_power_off(struct phy *phy)
+{
+	struct rockchip_typec_phy *tcphy = phy_get_drvdata(phy);
+
+	mutex_lock(&tcphy->lock);
+
+	if (tcphy->mode == MODE_DISCONNECT)
+		goto unlock;
+
+	tcphy->mode &= ~(MODE_UFP_USB | MODE_DFP_USB);
+	if (tcphy->mode == MODE_DISCONNECT)
+		tcphy_phy_deinit(tcphy);
+
+unlock:
+	mutex_unlock(&tcphy->lock);
+	return 0;
+}
+
+static const struct phy_ops rockchip_usb3_phy_ops = {
+	.power_on	= rockchip_usb3_phy_power_on,
+	.power_off	= rockchip_usb3_phy_power_off,
+	.owner		= THIS_MODULE,
+};
+
+static int rockchip_dp_phy_power_on(struct phy *phy)
+{
+	struct rockchip_typec_phy *tcphy = phy_get_drvdata(phy);
+	int new_mode, ret = 0;
+	u32 val;
+
+	mutex_lock(&tcphy->lock);
+
+	new_mode = tcphy_get_mode(tcphy);
+	if (new_mode < 0) {
+		ret = new_mode;
+		goto unlock_ret;
+	}
+
+	if (!(new_mode & MODE_DFP_DP)) {
+		ret = -ENODEV;
+		goto unlock_ret;
+	}
+
+	if (tcphy->mode == new_mode)
+		goto unlock_ret;
+
+	/*
+	 * If the PHY has been power on, but the mode is not DP only mode,
+	 * re-init the PHY for setting all of 4 lanes to DP.
+	 */
+	if (new_mode == MODE_DFP_DP && tcphy->mode != MODE_DISCONNECT) {
+		tcphy_phy_deinit(tcphy);
+		tcphy_phy_init(tcphy, new_mode);
+	} else if (tcphy->mode == MODE_DISCONNECT) {
+		tcphy_phy_init(tcphy, new_mode);
+	}
+
+	ret = readx_poll_timeout(readl, tcphy->base + DP_MODE_CTL,
+				 val, val & DP_MODE_A2, 1000,
+				 PHY_MODE_SET_TIMEOUT);
+	if (ret < 0) {
+		dev_err(tcphy->dev, "failed to wait TCPHY enter A2\n");
+		goto power_on_finish;
+	}
+
+	tcphy_dp_aux_calibration(tcphy);
+
+	writel(DP_MODE_ENTER_A0, tcphy->base + DP_MODE_CTL);
+
+	ret = readx_poll_timeout(readl, tcphy->base + DP_MODE_CTL,
+				 val, val & DP_MODE_A0, 1000,
+				 PHY_MODE_SET_TIMEOUT);
+	if (ret < 0) {
+		writel(DP_MODE_ENTER_A2, tcphy->base + DP_MODE_CTL);
+		dev_err(tcphy->dev, "failed to wait TCPHY enter A0\n");
+		goto power_on_finish;
+	}
+
+	tcphy->mode |= MODE_DFP_DP;
+
+power_on_finish:
+	if (tcphy->mode == MODE_DISCONNECT)
+		tcphy_phy_deinit(tcphy);
+unlock_ret:
+	mutex_unlock(&tcphy->lock);
+	return ret;
+}
+
+static int rockchip_dp_phy_power_off(struct phy *phy)
+{
+	struct rockchip_typec_phy *tcphy = phy_get_drvdata(phy);
+
+	mutex_lock(&tcphy->lock);
+
+	if (tcphy->mode == MODE_DISCONNECT)
+		goto unlock;
+
+	tcphy->mode &= ~MODE_DFP_DP;
+
+	writel(DP_MODE_ENTER_A2, tcphy->base + DP_MODE_CTL);
+
+	if (tcphy->mode == MODE_DISCONNECT)
+		tcphy_phy_deinit(tcphy);
+
+unlock:
+	mutex_unlock(&tcphy->lock);
+	return 0;
+}
+
+static const struct phy_ops rockchip_dp_phy_ops = {
+	.power_on	= rockchip_dp_phy_power_on,
+	.power_off	= rockchip_dp_phy_power_off,
+	.owner		= THIS_MODULE,
+};
+
+static int tcphy_get_param(struct device *dev,
+			   struct usb3phy_reg *reg,
+			   const char *name)
+{
+	u32 buffer[3];
+	int ret;
+
+	ret = of_property_read_u32_array(dev->of_node, name, buffer, 3);
+	if (ret) {
+		dev_err(dev, "Can not parse %s\n", name);
+		return ret;
+	}
+
+	reg->offset = buffer[0];
+	reg->enable_bit = buffer[1];
+	reg->write_enable = buffer[2];
+	return 0;
+}
+
+static int tcphy_parse_dt(struct rockchip_typec_phy *tcphy,
+			  struct device *dev)
+{
+	struct rockchip_usb3phy_port_cfg *cfg = &tcphy->port_cfgs;
+	int ret;
+
+	ret = tcphy_get_param(dev, &cfg->typec_conn_dir,
+			      "rockchip,typec-conn-dir");
+	if (ret)
+		return ret;
+
+	ret = tcphy_get_param(dev, &cfg->usb3tousb2_en,
+			      "rockchip,usb3tousb2-en");
+	if (ret)
+		return ret;
+
+	ret = tcphy_get_param(dev, &cfg->external_psm,
+			      "rockchip,external-psm");
+	if (ret)
+		return ret;
+
+	ret = tcphy_get_param(dev, &cfg->pipe_status,
+			      "rockchip,pipe-status");
+	if (ret)
+		return ret;
+
+	tcphy->grf_regs = syscon_regmap_lookup_by_phandle(dev->of_node,
+							  "rockchip,grf");
+	if (IS_ERR(tcphy->grf_regs)) {
+		dev_err(dev, "could not find grf dt node\n");
+		return PTR_ERR(tcphy->grf_regs);
+	}
+
+	tcphy->clk_core = devm_clk_get(dev, "tcpdcore");
+	if (IS_ERR(tcphy->clk_core)) {
+		dev_err(dev, "could not get uphy core clock\n");
+		return PTR_ERR(tcphy->clk_core);
+	}
+
+	tcphy->clk_ref = devm_clk_get(dev, "tcpdphy-ref");
+	if (IS_ERR(tcphy->clk_ref)) {
+		dev_err(dev, "could not get uphy ref clock\n");
+		return PTR_ERR(tcphy->clk_ref);
+	}
+
+	tcphy->uphy_rst = devm_reset_control_get(dev, "uphy");
+	if (IS_ERR(tcphy->uphy_rst)) {
+		dev_err(dev, "no uphy_rst reset control found\n");
+		return PTR_ERR(tcphy->uphy_rst);
+	}
+
+	tcphy->pipe_rst = devm_reset_control_get(dev, "uphy-pipe");
+	if (IS_ERR(tcphy->pipe_rst)) {
+		dev_err(dev, "no pipe_rst reset control found\n");
+		return PTR_ERR(tcphy->pipe_rst);
+	}
+
+	tcphy->tcphy_rst = devm_reset_control_get(dev, "uphy-tcphy");
+	if (IS_ERR(tcphy->tcphy_rst)) {
+		dev_err(dev, "no tcphy_rst reset control found\n");
+		return PTR_ERR(tcphy->tcphy_rst);
+	}
+
+	return 0;
+}
+
+static void typec_phy_pre_init(struct rockchip_typec_phy *tcphy)
+{
+	struct rockchip_usb3phy_port_cfg *cfg = &tcphy->port_cfgs;
+
+	reset_control_assert(tcphy->tcphy_rst);
+	reset_control_assert(tcphy->uphy_rst);
+	reset_control_assert(tcphy->pipe_rst);
+
+	/* select external psm clock */
+	property_enable(tcphy, &cfg->external_psm, 1);
+	property_enable(tcphy, &cfg->usb3tousb2_en, 0);
+
+	tcphy->mode = MODE_DISCONNECT;
+}
+
+static int rockchip_typec_phy_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct device_node *child_np;
+	struct rockchip_typec_phy *tcphy;
+	struct phy_provider *phy_provider;
+	struct resource *res;
+	int ret;
+
+	tcphy = devm_kzalloc(dev, sizeof(*tcphy), GFP_KERNEL);
+	if (!tcphy)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	tcphy->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(tcphy->base))
+		return PTR_ERR(tcphy->base);
+
+	ret = tcphy_parse_dt(tcphy, dev);
+	if (ret)
+		return ret;
+
+	tcphy->dev = dev;
+	platform_set_drvdata(pdev, tcphy);
+	mutex_init(&tcphy->lock);
+
+	typec_phy_pre_init(tcphy);
+
+	tcphy->extcon = extcon_get_edev_by_phandle(dev, 0);
+	if (IS_ERR(tcphy->extcon)) {
+		if (PTR_ERR(tcphy->extcon) != -EPROBE_DEFER)
+			dev_err(dev, "Invalid or missing extcon\n");
+		return PTR_ERR(tcphy->extcon);
+	}
+
+	pm_runtime_enable(dev);
+
+	for_each_available_child_of_node(np, child_np) {
+		struct phy *phy;
+
+		if (!of_node_cmp(child_np->name, "dp-port"))
+			phy = devm_phy_create(dev, child_np,
+					      &rockchip_dp_phy_ops);
+		else if (!of_node_cmp(child_np->name, "usb3-port"))
+			phy = devm_phy_create(dev, child_np,
+					      &rockchip_usb3_phy_ops);
+		else
+			continue;
+
+		if (IS_ERR(phy)) {
+			dev_err(dev, "failed to create phy: %s\n",
+				child_np->name);
+			return PTR_ERR(phy);
+		}
+
+		phy_set_drvdata(phy, tcphy);
+	}
+
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+	if (IS_ERR(phy_provider)) {
+		dev_err(dev, "Failed to register phy provider\n");
+		return PTR_ERR(phy_provider);
+	}
+
+	return 0;
+}
+
+static int rockchip_typec_phy_remove(struct platform_device *pdev)
+{
+	pm_runtime_disable(&pdev->dev);
+
+	return 0;
+}
+
+static const struct of_device_id rockchip_typec_phy_dt_ids[] = {
+	{ .compatible = "rockchip,rk3399-typec-phy" },
+	{}
+};
+
+MODULE_DEVICE_TABLE(of, rockchip_typec_phy_dt_ids);
+
+static struct platform_driver rockchip_typec_phy_driver = {
+	.probe		= rockchip_typec_phy_probe,
+	.remove		= rockchip_typec_phy_remove,
+	.driver		= {
+		.name	= "rockchip-typec-phy",
+		.of_match_table = rockchip_typec_phy_dt_ids,
+	},
+};
+
+module_platform_driver(rockchip_typec_phy_driver);
+
+MODULE_AUTHOR("Chris Zhong <zyw@rock-chips.com>");
+MODULE_AUTHOR("Kever Yang <kever.yang@rock-chips.com>");
+MODULE_DESCRIPTION("Rockchip USB TYPE-C PHY driver");
+MODULE_LICENSE("GPL v2");

drivers/phy/phy-rockchip-usb.c

@@ -29,6 +29,7 @@
 #include <linux/reset.h>
 #include <linux/regmap.h>
 #include <linux/mfd/syscon.h>
+#include <linux/delay.h>
 
 static int enable_usb_uart;
 
@@ -64,6 +65,7 @@ struct rockchip_usb_phy {
 	struct clk_hw	clk480m_hw;
 	struct phy	*phy;
 	bool		uart_enabled;
+	struct reset_control *reset;
 };
 
 static int rockchip_usb_phy_power(struct rockchip_usb_phy *phy,
@@ -144,9 +146,23 @@ static int rockchip_usb_phy_power_on(struct phy *_phy)
 	return clk_prepare_enable(phy->clk480m);
 }
 
+static int rockchip_usb_phy_reset(struct phy *_phy)
+{
+	struct rockchip_usb_phy *phy = phy_get_drvdata(_phy);
+
+	if (phy->reset) {
+		reset_control_assert(phy->reset);
+		udelay(10);
+		reset_control_deassert(phy->reset);
+	}
+
+	return 0;
+}
+
 static const struct phy_ops ops = {
 	.power_on	= rockchip_usb_phy_power_on,
 	.power_off	= rockchip_usb_phy_power_off,
+	.reset		= rockchip_usb_phy_reset,
 	.owner		= THIS_MODULE,
 };
 
@@ -185,6 +201,10 @@ static int rockchip_usb_phy_init(struct rockchip_usb_phy_base *base,
 		return -EINVAL;
 	}
 
+	rk_phy->reset = of_reset_control_get(child, "phy-reset");
+	if (IS_ERR(rk_phy->reset))
+		rk_phy->reset = NULL;
+
 	rk_phy->reg_offset = reg_offset;
 
 	rk_phy->clk = of_clk_get_by_name(child, "phyclk");

drivers/phy/phy-sun4i-usb.c

@@ -40,6 +40,7 @@
 #include <linux/power_supply.h>
 #include <linux/regulator/consumer.h>
 #include <linux/reset.h>
+#include <linux/spinlock.h>
 #include <linux/usb/of.h>
 #include <linux/workqueue.h>
 
@@ -50,7 +51,7 @@
 #define REG_PHYCTL_A33			0x10
 #define REG_PHY_UNK_H3			0x20
 
-#define REG_PMU_UNK_H3			0x10
+#define REG_PMU_UNK1			0x10
 
 #define PHYCTL_DATA			BIT(7)
 
@@ -98,6 +99,7 @@ enum sun4i_usb_phy_type {
 	sun6i_a31_phy,
 	sun8i_a33_phy,
 	sun8i_h3_phy,
+	sun50i_a64_phy,
 };
 
 struct sun4i_usb_phy_cfg {
@@ -106,13 +108,14 @@ struct sun4i_usb_phy_cfg {
 	u32 disc_thresh;
 	u8 phyctl_offset;
 	bool dedicated_clocks;
+	bool enable_pmu_unk1;
 };
 
 struct sun4i_usb_phy_data {
 	void __iomem *base;
 	const struct sun4i_usb_phy_cfg *cfg;
 	enum usb_dr_mode dr_mode;
-	struct mutex mutex;
+	spinlock_t reg_lock; /* guard access to phyctl reg */
 	struct sun4i_usb_phy {
 		struct phy *phy;
 		void __iomem *pmu;
@@ -122,7 +125,6 @@ struct sun4i_usb_phy_data {
 		bool regulator_on;
 		int index;
 	} phys[MAX_PHYS];
-	int first_phy;
 	/* phy0 / otg related variables */
 	struct extcon_dev *extcon;
 	bool phy0_init;
@@ -131,6 +133,7 @@ struct sun4i_usb_phy_data {
 	struct power_supply *vbus_power_supply;
 	struct notifier_block vbus_power_nb;
 	bool vbus_power_nb_registered;
+	bool force_session_end;
 	int id_det_irq;
 	int vbus_det_irq;
 	int id_det;
@@ -179,12 +182,14 @@ static void sun4i_usb_phy_write(struct sun4i_usb_phy *phy, u32 addr, u32 data,
 	struct sun4i_usb_phy_data *phy_data = to_sun4i_usb_phy_data(phy);
 	u32 temp, usbc_bit = BIT(phy->index * 2);
 	void __iomem *phyctl = phy_data->base + phy_data->cfg->phyctl_offset;
+	unsigned long flags;
 	int i;
 
-	mutex_lock(&phy_data->mutex);
+	spin_lock_irqsave(&phy_data->reg_lock, flags);
 
-	if (phy_data->cfg->type == sun8i_a33_phy) {
-		/* A33 needs us to set phyctl to 0 explicitly */
+	if (phy_data->cfg->type == sun8i_a33_phy ||
+	    phy_data->cfg->type == sun50i_a64_phy) {
+		/* A33 or A64 needs us to set phyctl to 0 explicitly */
 		writel(0, phyctl);
 	}
 
@@ -218,7 +223,8 @@ static void sun4i_usb_phy_write(struct sun4i_usb_phy *phy, u32 addr, u32 data,
 
 		data >>= 1;
 	}
-	mutex_unlock(&phy_data->mutex);
+
+	spin_unlock_irqrestore(&phy_data->reg_lock, flags);
 }
 
 static void sun4i_usb_phy_passby(struct sun4i_usb_phy *phy, int enable)
@@ -258,14 +264,16 @@ static int sun4i_usb_phy_init(struct phy *_phy)
 		return ret;
 	}
 
+	if (data->cfg->enable_pmu_unk1) {
+		val = readl(phy->pmu + REG_PMU_UNK1);
+		writel(val & ~2, phy->pmu + REG_PMU_UNK1);
+	}
+
 	if (data->cfg->type == sun8i_h3_phy) {
 		if (phy->index == 0) {
 			val = readl(data->base + REG_PHY_UNK_H3);
 			writel(val & ~1, data->base + REG_PHY_UNK_H3);
 		}
-
-		val = readl(phy->pmu + REG_PMU_UNK_H3);
-		writel(val & ~2, phy->pmu + REG_PMU_UNK_H3);
 	} else {
 		/* Enable USB 45 Ohm resistor calibration */
 		if (phy->index == 0)
@@ -320,7 +328,10 @@ static int sun4i_usb_phy0_get_id_det(struct sun4i_usb_phy_data *data)
 {
 	switch (data->dr_mode) {
 	case USB_DR_MODE_OTG:
-		return gpiod_get_value_cansleep(data->id_det_gpio);
+		if (data->id_det_gpio)
+			return gpiod_get_value_cansleep(data->id_det_gpio);
+		else
+			return 1; /* Fallback to peripheral mode */
 	case USB_DR_MODE_HOST:
 		return 0;
 	case USB_DR_MODE_PERIPHERAL:
@@ -382,8 +393,10 @@ static int sun4i_usb_phy_power_on(struct phy *_phy)
 
 	/* For phy0 only turn on Vbus if we don't have an ext. Vbus */
 	if (phy->index == 0 && sun4i_usb_phy0_have_vbus_det(data) &&
-				data->vbus_det)
+				data->vbus_det) {
+		dev_warn(&_phy->dev, "External vbus detected, not enabling our own vbus\n");
 		return 0;
+	}
 
 	ret = regulator_enable(phy->vbus);
 	if (ret)
@@ -419,6 +432,35 @@ static int sun4i_usb_phy_power_off(struct phy *_phy)
 	return 0;
 }
 
+static int sun4i_usb_phy_set_mode(struct phy *_phy, enum phy_mode mode)
+{
+	struct sun4i_usb_phy *phy = phy_get_drvdata(_phy);
+	struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy);
+
+	if (phy->index != 0)
+		return -EINVAL;
+
+	switch (mode) {
+	case PHY_MODE_USB_HOST:
+		data->dr_mode = USB_DR_MODE_HOST;
+		break;
+	case PHY_MODE_USB_DEVICE:
+		data->dr_mode = USB_DR_MODE_PERIPHERAL;
+		break;
+	case PHY_MODE_USB_OTG:
+		data->dr_mode = USB_DR_MODE_OTG;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	dev_info(&_phy->dev, "Changing dr_mode to %d\n", (int)data->dr_mode);
+	data->force_session_end = true;
+	queue_delayed_work(system_wq, &data->detect, 0);
+
+	return 0;
+}
+
 void sun4i_usb_phy_set_squelch_detect(struct phy *_phy, bool enabled)
 {
 	struct sun4i_usb_phy *phy = phy_get_drvdata(_phy);
@@ -432,6 +474,7 @@ static const struct phy_ops sun4i_usb_phy_ops = {
 	.exit		= sun4i_usb_phy_exit,
 	.power_on	= sun4i_usb_phy_power_on,
 	.power_off	= sun4i_usb_phy_power_off,
+	.set_mode	= sun4i_usb_phy_set_mode,
 	.owner		= THIS_MODULE,
 };
 
@@ -440,7 +483,8 @@ static void sun4i_usb_phy0_id_vbus_det_scan(struct work_struct *work)
 	struct sun4i_usb_phy_data *data =
 		container_of(work, struct sun4i_usb_phy_data, detect.work);
 	struct phy *phy0 = data->phys[0].phy;
-	int id_det, vbus_det, id_notify = 0, vbus_notify = 0;
+	bool force_session_end, id_notify = false, vbus_notify = false;
+	int id_det, vbus_det;
 
 	if (phy0 == NULL)
 		return;
@@ -455,27 +499,30 @@ static void sun4i_usb_phy0_id_vbus_det_scan(struct work_struct *work)
 		return;
 	}
 
+	force_session_end = data->force_session_end;
+	data->force_session_end = false;
+
 	if (id_det != data->id_det) {
-		/*
-		 * When a host cable (id == 0) gets plugged in on systems
-		 * without vbus detection report vbus low for long enough for
-		 * the musb-ip to end the current device session.
-		 */
+		/* id-change, force session end if we've no vbus detection */
 		if (data->dr_mode == USB_DR_MODE_OTG &&
-		    !sun4i_usb_phy0_have_vbus_det(data) && id_det == 0) {
+		    !sun4i_usb_phy0_have_vbus_det(data))
+			force_session_end = true;
+
+		/* When entering host mode (id = 0) force end the session now */
+		if (force_session_end && id_det == 0) {
 			sun4i_usb_phy0_set_vbus_detect(phy0, 0);
 			msleep(200);
 			sun4i_usb_phy0_set_vbus_detect(phy0, 1);
 		}
 		sun4i_usb_phy0_set_id_detect(phy0, id_det);
 		data->id_det = id_det;
-		id_notify = 1;
+		id_notify = true;
 	}
 
 	if (vbus_det != data->vbus_det) {
 		sun4i_usb_phy0_set_vbus_detect(phy0, vbus_det);
 		data->vbus_det = vbus_det;
-		vbus_notify = 1;
+		vbus_notify = true;
 	}
 
 	mutex_unlock(&phy0->mutex);
@@ -483,13 +530,8 @@ static void sun4i_usb_phy0_id_vbus_det_scan(struct work_struct *work)
 	if (id_notify) {
 		extcon_set_cable_state_(data->extcon, EXTCON_USB_HOST,
 					!id_det);
-		/*
-		 * When a host cable gets unplugged (id == 1) on systems
-		 * without vbus detection report vbus low for long enough to
-		 * the musb-ip to end the current host session.
-		 */
-		if (data->dr_mode == USB_DR_MODE_OTG &&
-		    !sun4i_usb_phy0_have_vbus_det(data) && id_det == 1) {
+		/* When leaving host mode force end the session here */
+		if (force_session_end && id_det == 1) {
 			mutex_lock(&phy0->mutex);
 			sun4i_usb_phy0_set_vbus_detect(phy0, 0);
 			msleep(1000);
@@ -534,8 +576,7 @@ static struct phy *sun4i_usb_phy_xlate(struct device *dev,
 {
 	struct sun4i_usb_phy_data *data = dev_get_drvdata(dev);
 
-	if (args->args[0] < data->first_phy ||
-	    args->args[0] >= data->cfg->num_phys)
+	if (args->args[0] >= data->cfg->num_phys)
 		return ERR_PTR(-ENODEV);
 
 	return data->phys[args->args[0]].phy;
@@ -577,7 +618,7 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
 	if (!data)
 		return -ENOMEM;
 
-	mutex_init(&data->mutex);
+	spin_lock_init(&data->reg_lock);
 	INIT_DELAYED_WORK(&data->detect, sun4i_usb_phy0_id_vbus_det_scan);
 	dev_set_drvdata(dev, data);
 	data->cfg = of_device_get_match_data(dev);
@@ -610,33 +651,18 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
 	}
 
 	data->dr_mode = of_usb_get_dr_mode_by_phy(np, 0);
-	switch (data->dr_mode) {
-	case USB_DR_MODE_OTG:
-		/* otg without id_det makes no sense, and is not supported */
-		if (!data->id_det_gpio) {
-			dev_err(dev, "usb0_id_det missing or invalid\n");
-			return -ENODEV;
-		}
-		/* fall through */
-	case USB_DR_MODE_HOST:
-	case USB_DR_MODE_PERIPHERAL:
-		data->extcon = devm_extcon_dev_allocate(dev,
-							sun4i_usb_phy0_cable);
-		if (IS_ERR(data->extcon))
-			return PTR_ERR(data->extcon);
 
-		ret = devm_extcon_dev_register(dev, data->extcon);
-		if (ret) {
-			dev_err(dev, "failed to register extcon: %d\n", ret);
-			return ret;
-		}
-		break;
-	default:
-		dev_info(dev, "dr_mode unknown, not registering usb phy0\n");
-		data->first_phy = 1;
+	data->extcon = devm_extcon_dev_allocate(dev, sun4i_usb_phy0_cable);
+	if (IS_ERR(data->extcon))
+		return PTR_ERR(data->extcon);
+
+	ret = devm_extcon_dev_register(dev, data->extcon);
+	if (ret) {
+		dev_err(dev, "failed to register extcon: %d\n", ret);
+		return ret;
 	}
 
-	for (i = data->first_phy; i < data->cfg->num_phys; i++) {
+	for (i = 0; i < data->cfg->num_phys; i++) {
 		struct sun4i_usb_phy *phy = data->phys + i;
 		char name[16];
 
@@ -737,6 +763,7 @@ static const struct sun4i_usb_phy_cfg sun4i_a10_cfg = {
 	.disc_thresh = 3,
 	.phyctl_offset = REG_PHYCTL_A10,
 	.dedicated_clocks = false,
+	.enable_pmu_unk1 = false,
 };
 
 static const struct sun4i_usb_phy_cfg sun5i_a13_cfg = {
@@ -745,6 +772,7 @@ static const struct sun4i_usb_phy_cfg sun5i_a13_cfg = {
 	.disc_thresh = 2,
 	.phyctl_offset = REG_PHYCTL_A10,
 	.dedicated_clocks = false,
+	.enable_pmu_unk1 = false,
 };
 
 static const struct sun4i_usb_phy_cfg sun6i_a31_cfg = {
@@ -753,6 +781,7 @@ static const struct sun4i_usb_phy_cfg sun6i_a31_cfg = {
 	.disc_thresh = 3,
 	.phyctl_offset = REG_PHYCTL_A10,
 	.dedicated_clocks = true,
+	.enable_pmu_unk1 = false,
 };
 
 static const struct sun4i_usb_phy_cfg sun7i_a20_cfg = {
@@ -761,6 +790,7 @@ static const struct sun4i_usb_phy_cfg sun7i_a20_cfg = {
 	.disc_thresh = 2,
 	.phyctl_offset = REG_PHYCTL_A10,
 	.dedicated_clocks = false,
+	.enable_pmu_unk1 = false,
 };
 
 static const struct sun4i_usb_phy_cfg sun8i_a23_cfg = {
@@ -769,6 +799,7 @@ static const struct sun4i_usb_phy_cfg sun8i_a23_cfg = {
 	.disc_thresh = 3,
 	.phyctl_offset = REG_PHYCTL_A10,
 	.dedicated_clocks = true,
+	.enable_pmu_unk1 = false,
 };
 
 static const struct sun4i_usb_phy_cfg sun8i_a33_cfg = {
@@ -777,6 +808,7 @@ static const struct sun4i_usb_phy_cfg sun8i_a33_cfg = {
 	.disc_thresh = 3,
 	.phyctl_offset = REG_PHYCTL_A33,
 	.dedicated_clocks = true,
+	.enable_pmu_unk1 = false,
 };
 
 static const struct sun4i_usb_phy_cfg sun8i_h3_cfg = {
@@ -784,6 +816,16 @@ static const struct sun4i_usb_phy_cfg sun8i_h3_cfg = {
 	.type = sun8i_h3_phy,
 	.disc_thresh = 3,
 	.dedicated_clocks = true,
+	.enable_pmu_unk1 = true,
+};
+
+static const struct sun4i_usb_phy_cfg sun50i_a64_cfg = {
+	.num_phys = 2,
+	.type = sun50i_a64_phy,
+	.disc_thresh = 3,
+	.phyctl_offset = REG_PHYCTL_A33,
+	.dedicated_clocks = true,
+	.enable_pmu_unk1 = true,
 };
 
 static const struct of_device_id sun4i_usb_phy_of_match[] = {
@@ -794,6 +836,8 @@ static const struct of_device_id sun4i_usb_phy_of_match[] = {
 	{ .compatible = "allwinner,sun8i-a23-usb-phy", .data = &sun8i_a23_cfg },
 	{ .compatible = "allwinner,sun8i-a33-usb-phy", .data = &sun8i_a33_cfg },
 	{ .compatible = "allwinner,sun8i-h3-usb-phy", .data = &sun8i_h3_cfg },
+	{ .compatible = "allwinner,sun50i-a64-usb-phy",
+	  .data = &sun50i_a64_cfg},
 	{ },
 };
 MODULE_DEVICE_TABLE(of, sun4i_usb_phy_of_match);

drivers/phy/phy-twl4030-usb.c

@@ -172,6 +172,7 @@ struct twl4030_usb {
 	int			irq;
 	enum musb_vbus_id_status linkstat;
 	bool			vbus_supplied;
+	bool			musb_mailbox_pending;
 
 	struct delayed_work	id_workaround_work;
 };
@@ -439,6 +440,17 @@ static int __maybe_unused twl4030_usb_runtime_resume(struct device *dev)
 			  (PHY_CLK_CTRL_CLOCKGATING_EN |
 			   PHY_CLK_CTRL_CLK32K_EN));
 
+	twl4030_i2c_access(twl, 1);
+	twl4030_usb_set_mode(twl, twl->usb_mode);
+	if (twl->usb_mode == T2_USB_MODE_ULPI)
+		twl4030_i2c_access(twl, 0);
+	/*
+	 * According to the TPS65950 TRM, there has to be at least 50ms
+	 * delay between setting POWER_CTRL_OTG_ENAB and enabling charging
+	 * so wait here so that a fully enabled phy can be expected after
+	 * resume
+	 */
+	msleep(50);
 	return 0;
 }
 
@@ -459,11 +471,6 @@ static int twl4030_phy_power_on(struct phy *phy)
 
 	dev_dbg(twl->dev, "%s\n", __func__);
 	pm_runtime_get_sync(twl->dev);
-	twl4030_i2c_access(twl, 1);
-	twl4030_usb_set_mode(twl, twl->usb_mode);
-	if (twl->usb_mode == T2_USB_MODE_ULPI)
-		twl4030_i2c_access(twl, 0);
-	twl->linkstat = MUSB_UNKNOWN;
 	schedule_delayed_work(&twl->id_workaround_work, HZ);
 
 	return 0;
@@ -569,9 +576,12 @@ static irqreturn_t twl4030_usb_irq(int irq, void *_twl)
 			pm_runtime_mark_last_busy(twl->dev);
 			pm_runtime_put_autosuspend(twl->dev);
 		}
+		twl->musb_mailbox_pending = true;
+	}
+	if (twl->musb_mailbox_pending) {
 		err = musb_mailbox(status);
-		if (err)
-			twl->linkstat = MUSB_UNKNOWN;
+		if (!err)
+			twl->musb_mailbox_pending = false;
 	}
 
 	/* don't schedule during sleep - irq works right then */
@@ -676,6 +686,7 @@ static int twl4030_usb_probe(struct platform_device *pdev)
 	twl->irq		= platform_get_irq(pdev, 0);
 	twl->vbus_supplied	= false;
 	twl->linkstat		= MUSB_UNKNOWN;
+	twl->musb_mailbox_pending = false;
 
 	twl->phy.dev		= twl->dev;
 	twl->phy.label		= "twl4030";

drivers/phy/tegra/xusb.c

@@ -18,6 +18,7 @@
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/phy/phy.h>
+#include <linux/phy/tegra/xusb.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/consumer.h>
 #include <linux/reset.h>
@@ -101,7 +102,8 @@ tegra_xusb_pad_find_phy_node(struct tegra_xusb_pad *pad, unsigned int index)
 	return of_find_node_by_name(np, pad->soc->lanes[index].name);
 }
 
-int tegra_xusb_lane_lookup_function(struct tegra_xusb_lane *lane,
+static int
+tegra_xusb_lane_lookup_function(struct tegra_xusb_lane *lane,
 				    const char *function)
 {
 	unsigned int i;

drivers/usb/Kconfig

@@ -152,7 +152,8 @@ source "drivers/usb/gadget/Kconfig"
 
 config USB_LED_TRIG
 	bool "USB LED Triggers"
-	depends on LEDS_CLASS && USB_COMMON && LEDS_TRIGGERS
+	depends on LEDS_CLASS && LEDS_TRIGGERS
+	select USB_COMMON
 	help
 	  This option adds LED triggers for USB host and/or gadget activity.
 
@@ -160,4 +161,25 @@ config USB_LED_TRIG
 	  LEDs and you want to use them as activity indicators for USB host or
 	  gadget.
 
+config USB_ULPI_BUS
+	tristate "USB ULPI PHY interface support"
+	select USB_COMMON
+	help
+	  UTMI+ Low Pin Interface (ULPI) is specification for a commonly used
+	  USB 2.0 PHY interface. The ULPI specification defines a standard set
+	  of registers that can be used to detect the vendor and product which
+	  allows ULPI to be handled as a bus. This module is the driver for that
+	  bus.
+
+	  The ULPI interfaces (the buses) are registered by the drivers for USB
+	  controllers which support ULPI register access and have ULPI PHY
+	  attached to them. The ULPI PHY drivers themselves are normal PHY
+	  drivers.
+
+	  ULPI PHYs provide often functions such as ADP sensing/probing (OTG
+	  protocol) and USB charger detection.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called ulpi.
+
 endif # USB_SUPPORT

drivers/usb/atm/cxacru.c

@@ -1139,10 +1139,8 @@ static int cxacru_bind(struct usbatm_data *usbatm_instance,
 
 	/* instance init */
 	instance = kzalloc(sizeof(*instance), GFP_KERNEL);
-	if (!instance) {
-		usb_dbg(usbatm_instance, "cxacru_bind: no memory for instance data\n");
+	if (!instance)
 		return -ENOMEM;
-	}
 
 	instance->usbatm = usbatm_instance;
 	instance->modem_type = (struct cxacru_modem_type *) id->driver_info;
@@ -1168,13 +1166,11 @@ static int cxacru_bind(struct usbatm_data *usbatm_instance,
 	}
 	instance->rcv_urb = usb_alloc_urb(0, GFP_KERNEL);
 	if (!instance->rcv_urb) {
-		usb_dbg(usbatm_instance, "cxacru_bind: no memory for rcv_urb\n");
 		ret = -ENOMEM;
 		goto fail;
 	}
 	instance->snd_urb = usb_alloc_urb(0, GFP_KERNEL);
 	if (!instance->snd_urb) {
-		usb_dbg(usbatm_instance, "cxacru_bind: no memory for snd_urb\n");
 		ret = -ENOMEM;
 		goto fail;
 	}

drivers/usb/atm/speedtch.c

@@ -817,7 +817,6 @@ static int speedtch_bind(struct usbatm_data *usbatm,
 	instance = kzalloc(sizeof(*instance), GFP_KERNEL);
 
 	if (!instance) {
-		usb_err(usbatm, "%s: no memory for instance data!\n", __func__);
 		ret = -ENOMEM;
 		goto fail_release;
 	}

drivers/usb/atm/ueagle-atm.c

@@ -2196,17 +2196,12 @@ static int uea_boot(struct uea_softc *sc)
 		load_XILINX_firmware(sc);
 
 	intr = kmalloc(size, GFP_KERNEL);
-	if (!intr) {
-		uea_err(INS_TO_USBDEV(sc),
-		       "cannot allocate interrupt package\n");
+	if (!intr)
 		goto err0;
-	}
 
 	sc->urb_int = usb_alloc_urb(0, GFP_KERNEL);
-	if (!sc->urb_int) {
-		uea_err(INS_TO_USBDEV(sc), "cannot allocate interrupt URB\n");
+	if (!sc->urb_int)
 		goto err1;
-	}
 
 	usb_fill_int_urb(sc->urb_int, sc->usb_dev,
 			 usb_rcvintpipe(sc->usb_dev, UEA_INTR_PIPE),
@@ -2561,10 +2556,8 @@ static int uea_bind(struct usbatm_data *usbatm, struct usb_interface *intf,
 	}
 
 	sc = kzalloc(sizeof(struct uea_softc), GFP_KERNEL);
-	if (!sc) {
-		uea_err(usb, "uea_init: not enough memory !\n");
+	if (!sc)
 		return -ENOMEM;
-	}
 
 	sc->usb_dev = usb;
 	usbatm->driver_data = sc;

drivers/usb/atm/usbatm.c

@@ -819,7 +819,6 @@ static int usbatm_atm_open(struct atm_vcc *vcc)
 
 	new = kzalloc(sizeof(struct usbatm_vcc_data), GFP_KERNEL);
 	if (!new) {
-		atm_err(instance, "%s: no memory for vcc_data!\n", __func__);
 		ret = -ENOMEM;
 		goto fail;
 	}
@@ -1032,10 +1031,8 @@ int usbatm_usb_probe(struct usb_interface *intf, const struct usb_device_id *id,
 
 	/* instance init */
 	instance = kzalloc(sizeof(*instance) + sizeof(struct urb *) * (num_rcv_urbs + num_snd_urbs), GFP_KERNEL);
-	if (!instance) {
-		dev_err(dev, "%s: no memory for instance data!\n", __func__);
+	if (!instance)
 		return -ENOMEM;
-	}
 
 	/* public fields */
 
@@ -1141,7 +1138,6 @@ int usbatm_usb_probe(struct usb_interface *intf, const struct usb_device_id *id,
 
 		urb = usb_alloc_urb(iso_packets, GFP_KERNEL);
 		if (!urb) {
-			dev_err(dev, "%s: no memory for urb %d!\n", __func__, i);
 			error = -ENOMEM;
 			goto fail_unbind;
 		}
@@ -1151,7 +1147,6 @@ int usbatm_usb_probe(struct usb_interface *intf, const struct usb_device_id *id,
 		/* zero the tx padding to avoid leaking information */
 		buffer = kzalloc(channel->buf_size, GFP_KERNEL);
 		if (!buffer) {
-			dev_err(dev, "%s: no memory for buffer %d!\n", __func__, i);
 			error = -ENOMEM;
 			goto fail_unbind;
 		}
@@ -1182,7 +1177,6 @@ int usbatm_usb_probe(struct usb_interface *intf, const struct usb_device_id *id,
 	instance->cell_buf = kmalloc(instance->rx_channel.stride, GFP_KERNEL);
 
 	if (!instance->cell_buf) {
-		dev_err(dev, "%s: no memory for cell buffer!\n", __func__);
 		error = -ENOMEM;
 		goto fail_unbind;
 	}

drivers/usb/chipidea/ci_hdrc_imx.c

@@ -140,6 +140,9 @@ static struct imx_usbmisc_data *usbmisc_get_init_data(struct device *dev)
 	if (of_find_property(np, "disable-over-current", NULL))
 		data->disable_oc = 1;
 
+	if (of_find_property(np, "over-current-active-high", NULL))
+		data->oc_polarity = 1;
+
 	if (of_find_property(np, "external-vbus-divider", NULL))
 		data->evdo = 1;
 

drivers/usb/chipidea/ci_hdrc_imx.h

@@ -17,6 +17,7 @@ struct imx_usbmisc_data {
 	int index;
 
 	unsigned int disable_oc:1; /* over current detect disabled */
+	unsigned int oc_polarity:1; /* over current polarity if oc enabled */
 	unsigned int evdo:1; /* set external vbus divider option */
 };
 

drivers/usb/chipidea/host.c

@@ -81,12 +81,15 @@ static int ehci_ci_reset(struct usb_hcd *hcd)
 {
 	struct device *dev = hcd->self.controller;
 	struct ci_hdrc *ci = dev_get_drvdata(dev);
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
 	int ret;
 
 	ret = ehci_setup(hcd);
 	if (ret)
 		return ret;
 
+	ehci->need_io_watchdog = 0;
+
 	ci_platform_configure(ci);
 
 	return ret;

drivers/usb/chipidea/udc.c

@@ -59,7 +59,7 @@ ctrl_endpt_in_desc = {
  */
 static inline int hw_ep_bit(int num, int dir)
 {
-	return num + (dir ? 16 : 0);
+	return num + ((dir == TX) ? 16 : 0);
 }
 
 static inline int ep_to_bit(struct ci_hdrc *ci, int n)
@@ -121,9 +121,8 @@ static int hw_ep_flush(struct ci_hdrc *ci, int num, int dir)
  */
 static int hw_ep_disable(struct ci_hdrc *ci, int num, int dir)
 {
-	hw_ep_flush(ci, num, dir);
 	hw_write(ci, OP_ENDPTCTRL + num,
-		 dir ? ENDPTCTRL_TXE : ENDPTCTRL_RXE, 0);
+		 (dir == TX) ? ENDPTCTRL_TXE : ENDPTCTRL_RXE, 0);
 	return 0;
 }
 
@@ -139,7 +138,7 @@ static int hw_ep_enable(struct ci_hdrc *ci, int num, int dir, int type)
 {
 	u32 mask, data;
 
-	if (dir) {
+	if (dir == TX) {
 		mask  = ENDPTCTRL_TXT;  /* type    */
 		data  = type << __ffs(mask);
 
@@ -171,7 +170,7 @@ static int hw_ep_enable(struct ci_hdrc *ci, int num, int dir, int type)
  */
 static int hw_ep_get_halt(struct ci_hdrc *ci, int num, int dir)
 {
-	u32 mask = dir ? ENDPTCTRL_TXS : ENDPTCTRL_RXS;
+	u32 mask = (dir == TX) ? ENDPTCTRL_TXS : ENDPTCTRL_RXS;
 
 	return hw_read(ci, OP_ENDPTCTRL + num, mask) ? 1 : 0;
 }
@@ -188,6 +187,9 @@ static int hw_ep_prime(struct ci_hdrc *ci, int num, int dir, int is_ctrl)
 {
 	int n = hw_ep_bit(num, dir);
 
+	/* Synchronize before ep prime */
+	wmb();
+
 	if (is_ctrl && dir == RX && hw_read(ci, OP_ENDPTSETUPSTAT, BIT(num)))
 		return -EAGAIN;
 
@@ -218,8 +220,8 @@ static int hw_ep_set_halt(struct ci_hdrc *ci, int num, int dir, int value)
 
 	do {
 		enum ci_hw_regs reg = OP_ENDPTCTRL + num;
-		u32 mask_xs = dir ? ENDPTCTRL_TXS : ENDPTCTRL_RXS;
-		u32 mask_xr = dir ? ENDPTCTRL_TXR : ENDPTCTRL_RXR;
+		u32 mask_xs = (dir == TX) ? ENDPTCTRL_TXS : ENDPTCTRL_RXS;
+		u32 mask_xr = (dir == TX) ? ENDPTCTRL_TXR : ENDPTCTRL_RXR;
 
 		/* data toggle - reserved for EP0 but it's in ESS */
 		hw_write(ci, reg, mask_xs|mask_xr,
@@ -348,8 +350,7 @@ static int add_td_to_list(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq,
 	if (node == NULL)
 		return -ENOMEM;
 
-	node->ptr = dma_pool_zalloc(hwep->td_pool, GFP_ATOMIC,
-				   &node->dma);
+	node->ptr = dma_pool_zalloc(hwep->td_pool, GFP_ATOMIC, &node->dma);
 	if (node->ptr == NULL) {
 		kfree(node);
 		return -ENOMEM;
@@ -506,8 +507,6 @@ static int _hardware_enqueue(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq)
 		hwep->qh.ptr->cap |= mul << __ffs(QH_MULT);
 	}
 
-	wmb();   /* synchronize before ep prime */
-
 	ret = hw_ep_prime(ci, hwep->num, hwep->dir,
 			   hwep->type == USB_ENDPOINT_XFER_CONTROL);
 done:
@@ -534,9 +533,6 @@ static int reprime_dtd(struct ci_hdrc *ci, struct ci_hw_ep *hwep,
 	hwep->qh.ptr->td.token &=
 		cpu_to_le32(~(TD_STATUS_HALTED | TD_STATUS_ACTIVE));
 
-	/* Synchronize before ep prime */
-	wmb();
-
 	return hw_ep_prime(ci, hwep->num, hwep->dir,
 				hwep->type == USB_ENDPOINT_XFER_CONTROL);
 }
@@ -590,7 +586,7 @@ static int _hardware_dequeue(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq)
 		}
 
 		if (remaining_length) {
-			if (hwep->dir) {
+			if (hwep->dir == TX) {
 				hwreq->req.status = -EPROTO;
 				break;
 			}
@@ -1051,9 +1047,9 @@ __acquires(ci->lock)
 			if (req.wLength != 0)
 				break;
 			num  = le16_to_cpu(req.wIndex);
-			dir = num & USB_ENDPOINT_DIR_MASK;
+			dir = (num & USB_ENDPOINT_DIR_MASK) ? TX : RX;
 			num &= USB_ENDPOINT_NUMBER_MASK;
-			if (dir) /* TX */
+			if (dir == TX)
 				num += ci->hw_ep_max / 2;
 			if (!ci->ci_hw_ep[num].wedge) {
 				spin_unlock(&ci->lock);
@@ -1103,9 +1099,9 @@ __acquires(ci->lock)
 			if (req.wLength != 0)
 				break;
 			num  = le16_to_cpu(req.wIndex);
-			dir = num & USB_ENDPOINT_DIR_MASK;
+			dir = (num & USB_ENDPOINT_DIR_MASK) ? TX : RX;
 			num &= USB_ENDPOINT_NUMBER_MASK;
-			if (dir) /* TX */
+			if (dir == TX)
 				num += ci->hw_ep_max / 2;
 
 			spin_unlock(&ci->lock);
@@ -1680,12 +1676,10 @@ static int init_eps(struct ci_hdrc *ci)
 			usb_ep_set_maxpacket_limit(&hwep->ep, (unsigned short)~0);
 
 			INIT_LIST_HEAD(&hwep->qh.queue);
-			hwep->qh.ptr = dma_pool_alloc(ci->qh_pool, GFP_KERNEL,
-						     &hwep->qh.dma);
+			hwep->qh.ptr = dma_pool_zalloc(ci->qh_pool, GFP_KERNEL,
+						       &hwep->qh.dma);
 			if (hwep->qh.ptr == NULL)
 				retval = -ENOMEM;
-			else
-				memset(hwep->qh.ptr, 0, sizeof(*hwep->qh.ptr));
 
 			/*
 			 * set up shorthands for ep0 out and in endpoints,
@@ -1999,7 +1993,7 @@ int ci_hdrc_gadget_init(struct ci_hdrc *ci)
 	if (!hw_read(ci, CAP_DCCPARAMS, DCCPARAMS_DC))
 		return -ENXIO;
 
-	rdrv = devm_kzalloc(ci->dev, sizeof(struct ci_role_driver), GFP_KERNEL);
+	rdrv = devm_kzalloc(ci->dev, sizeof(*rdrv), GFP_KERNEL);
 	if (!rdrv)
 		return -ENOMEM;
 

drivers/usb/chipidea/usbmisc_imx.c

@@ -56,6 +56,7 @@
 
 #define MX6_BM_NON_BURST_SETTING	BIT(1)
 #define MX6_BM_OVER_CUR_DIS		BIT(7)
+#define MX6_BM_OVER_CUR_POLARITY	BIT(8)
 #define MX6_BM_WAKEUP_ENABLE		BIT(10)
 #define MX6_BM_ID_WAKEUP		BIT(16)
 #define MX6_BM_VBUS_WAKEUP		BIT(17)
@@ -266,11 +267,14 @@ static int usbmisc_imx6q_init(struct imx_usbmisc_data *data)
 
 	spin_lock_irqsave(&usbmisc->lock, flags);
 
+	reg = readl(usbmisc->base + data->index * 4);
 	if (data->disable_oc) {
-		reg = readl(usbmisc->base + data->index * 4);
-		writel(reg | MX6_BM_OVER_CUR_DIS,
-			usbmisc->base + data->index * 4);
+		reg |= MX6_BM_OVER_CUR_DIS;
+	} else if (data->oc_polarity == 1) {
+		/* High active */
+		reg &= ~(MX6_BM_OVER_CUR_DIS | MX6_BM_OVER_CUR_POLARITY);
 	}
+	writel(reg, usbmisc->base + data->index * 4);
 
 	/* SoC non-burst setting */
 	reg = readl(usbmisc->base + data->index * 4);
@@ -365,10 +369,14 @@ static int usbmisc_imx7d_init(struct imx_usbmisc_data *data)
 		return -EINVAL;
 
 	spin_lock_irqsave(&usbmisc->lock, flags);
+	reg = readl(usbmisc->base);
 	if (data->disable_oc) {
-		reg = readl(usbmisc->base);
-		writel(reg | MX6_BM_OVER_CUR_DIS, usbmisc->base);
+		reg |= MX6_BM_OVER_CUR_DIS;
+	} else if (data->oc_polarity == 1) {
+		/* High active */
+		reg &= ~(MX6_BM_OVER_CUR_DIS | MX6_BM_OVER_CUR_POLARITY);
 	}
+	writel(reg, usbmisc->base);
 
 	reg = readl(usbmisc->base + MX7D_USBNC_USB_CTRL2);
 	reg &= ~MX7D_USB_VBUS_WAKEUP_SOURCE_MASK;
@@ -492,6 +500,10 @@ static const struct of_device_id usbmisc_imx_dt_ids[] = {
 		.compatible = "fsl,imx6ul-usbmisc",
 		.data = &imx6sx_usbmisc_ops,
 	},
+	{
+		.compatible = "fsl,imx7d-usbmisc",
+		.data = &imx7d_usbmisc_ops,
+	},
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, usbmisc_imx_dt_ids);

drivers/usb/class/cdc-acm.c

@@ -368,17 +368,17 @@ static int acm_submit_read_urb(struct acm *acm, int index, gfp_t mem_flags)
 	if (!test_and_clear_bit(index, &acm->read_urbs_free))
 		return 0;
 
-	dev_vdbg(&acm->data->dev, "%s - urb %d\n", __func__, index);
-
 	res = usb_submit_urb(acm->read_urbs[index], mem_flags);
 	if (res) {
 		if (res != -EPERM) {
 			dev_err(&acm->data->dev,
-					"%s - usb_submit_urb failed: %d\n",
-					__func__, res);
+					"urb %d failed submission with %d\n",
+					index, res);
 		}
 		set_bit(index, &acm->read_urbs_free);
 		return res;
+	} else {
+		dev_vdbg(&acm->data->dev, "submitted urb %d\n", index);
 	}
 
 	return 0;
@@ -415,8 +415,9 @@ static void acm_read_bulk_callback(struct urb *urb)
 	unsigned long flags;
 	int status = urb->status;
 
-	dev_vdbg(&acm->data->dev, "%s - urb %d, len %d\n", __func__,
-					rb->index, urb->actual_length);
+	dev_vdbg(&acm->data->dev, "got urb %d, len %d, status %d\n",
+					rb->index, urb->actual_length,
+					status);
 
 	if (!acm->dev) {
 		set_bit(rb->index, &acm->read_urbs_free);
@@ -426,8 +427,6 @@ static void acm_read_bulk_callback(struct urb *urb)
 
 	if (status) {
 		set_bit(rb->index, &acm->read_urbs_free);
-		dev_dbg(&acm->data->dev, "%s - non-zero urb status: %d\n",
-							__func__, status);
 		if ((status != -ENOENT) || (urb->actual_length == 0))
 			return;
 	}
@@ -462,8 +461,7 @@ static void acm_write_bulk(struct urb *urb)
 	int status = urb->status;
 
 	if (status || (urb->actual_length != urb->transfer_buffer_length))
-		dev_vdbg(&acm->data->dev, "%s - len %d/%d, status %d\n",
-			__func__,
+		dev_vdbg(&acm->data->dev, "wrote len %d/%d, status %d\n",
 			urb->actual_length,
 			urb->transfer_buffer_length,
 			status);
@@ -478,8 +476,6 @@ static void acm_softint(struct work_struct *work)
 {
 	struct acm *acm = container_of(work, struct acm, work);
 
-	dev_vdbg(&acm->data->dev, "%s\n", __func__);
-
 	tty_port_tty_wakeup(&acm->port);
 }
 
@@ -492,8 +488,6 @@ static int acm_tty_install(struct tty_driver *driver, struct tty_struct *tty)
 	struct acm *acm;
 	int retval;
 
-	dev_dbg(tty->dev, "%s\n", __func__);
-
 	acm = acm_get_by_minor(tty->index);
 	if (!acm)
 		return -ENODEV;
@@ -515,8 +509,6 @@ static int acm_tty_open(struct tty_struct *tty, struct file *filp)
 {
 	struct acm *acm = tty->driver_data;
 
-	dev_dbg(tty->dev, "%s\n", __func__);
-
 	return tty_port_open(&acm->port, tty, filp);
 }
 
@@ -545,8 +537,6 @@ static int acm_port_activate(struct tty_port *port, struct tty_struct *tty)
 	int retval = -ENODEV;
 	int i;
 
-	dev_dbg(&acm->control->dev, "%s\n", __func__);
-
 	mutex_lock(&acm->mutex);
 	if (acm->disconnected)
 		goto disconnected;
@@ -607,8 +597,6 @@ static void acm_port_destruct(struct tty_port *port)
 {
 	struct acm *acm = container_of(port, struct acm, port);
 
-	dev_dbg(&acm->control->dev, "%s\n", __func__);
-
 	acm_release_minor(acm);
 	usb_put_intf(acm->control);
 	kfree(acm->country_codes);
@@ -622,8 +610,6 @@ static void acm_port_shutdown(struct tty_port *port)
 	struct acm_wb *wb;
 	int i;
 
-	dev_dbg(&acm->control->dev, "%s\n", __func__);
-
 	/*
 	 * Need to grab write_lock to prevent race with resume, but no need to
 	 * hold it due to the tty-port initialised flag.
@@ -654,21 +640,21 @@ static void acm_port_shutdown(struct tty_port *port)
 static void acm_tty_cleanup(struct tty_struct *tty)
 {
 	struct acm *acm = tty->driver_data;
-	dev_dbg(&acm->control->dev, "%s\n", __func__);
+
 	tty_port_put(&acm->port);
 }
 
 static void acm_tty_hangup(struct tty_struct *tty)
 {
 	struct acm *acm = tty->driver_data;
-	dev_dbg(&acm->control->dev, "%s\n", __func__);
+
 	tty_port_hangup(&acm->port);
 }
 
 static void acm_tty_close(struct tty_struct *tty, struct file *filp)
 {
 	struct acm *acm = tty->driver_data;
-	dev_dbg(&acm->control->dev, "%s\n", __func__);
+
 	tty_port_close(&acm->port, tty, filp);
 }
 
@@ -684,7 +670,7 @@ static int acm_tty_write(struct tty_struct *tty,
 	if (!count)
 		return 0;
 
-	dev_vdbg(&acm->data->dev, "%s - count %d\n", __func__, count);
+	dev_vdbg(&acm->data->dev, "%d bytes from tty layer\n", count);
 
 	spin_lock_irqsave(&acm->write_lock, flags);
 	wbn = acm_wb_alloc(acm);
@@ -701,7 +687,7 @@ static int acm_tty_write(struct tty_struct *tty,
 	}
 
 	count = (count > acm->writesize) ? acm->writesize : count;
-	dev_vdbg(&acm->data->dev, "%s - write %d\n", __func__, count);
+	dev_vdbg(&acm->data->dev, "writing %d bytes\n", count);
 	memcpy(wb->buf, buf, count);
 	wb->len = count;
 
@@ -1193,6 +1179,9 @@ static int acm_probe(struct usb_interface *intf,
 		return -EINVAL;
 	}
 
+	if (!intf->cur_altsetting)
+		return -EINVAL;
+
 	if (!buflen) {
 		if (intf->cur_altsetting->endpoint &&
 				intf->cur_altsetting->endpoint->extralen &&
@@ -1246,6 +1235,8 @@ static int acm_probe(struct usb_interface *intf,
 		dev_dbg(&intf->dev, "no interfaces\n");
 		return -ENODEV;
 	}
+	if (!data_interface->cur_altsetting || !control_interface->cur_altsetting)
+		return -ENODEV;
 
 	if (data_intf_num != call_intf_num)
 		dev_dbg(&intf->dev, "Separate call control interface. That is not fully supported.\n");
@@ -1533,8 +1524,6 @@ static void stop_data_traffic(struct acm *acm)
 {
 	int i;
 
-	dev_dbg(&acm->control->dev, "%s\n", __func__);
-
 	usb_kill_urb(acm->ctrlurb);
 	for (i = 0; i < ACM_NW; i++)
 		usb_kill_urb(acm->wb[i].urb);
@@ -1551,8 +1540,6 @@ static void acm_disconnect(struct usb_interface *intf)
 	struct tty_struct *tty;
 	int i;
 
-	dev_dbg(&intf->dev, "%s\n", __func__);
-
 	/* sibling interface is already cleaning up */
 	if (!acm)
 		return;

drivers/usb/class/cdc-wdm.c

@@ -58,6 +58,7 @@ MODULE_DEVICE_TABLE (usb, wdm_ids);
 #define WDM_SUSPENDING		8
 #define WDM_RESETTING		9
 #define WDM_OVERFLOW		10
+#define WDM_DRAIN_ON_OPEN	11
 
 #define WDM_MAX			16
 
@@ -154,6 +155,9 @@ static void wdm_out_callback(struct urb *urb)
 	wake_up(&desc->wait);
 }
 
+/* forward declaration */
+static int service_outstanding_interrupt(struct wdm_device *desc);
+
 static void wdm_in_callback(struct urb *urb)
 {
 	struct wdm_device *desc = urb->context;
@@ -167,18 +171,18 @@ static void wdm_in_callback(struct urb *urb)
 		switch (status) {
 		case -ENOENT:
 			dev_dbg(&desc->intf->dev,
-				"nonzero urb status received: -ENOENT");
+				"nonzero urb status received: -ENOENT\n");
 			goto skip_error;
 		case -ECONNRESET:
 			dev_dbg(&desc->intf->dev,
-				"nonzero urb status received: -ECONNRESET");
+				"nonzero urb status received: -ECONNRESET\n");
 			goto skip_error;
 		case -ESHUTDOWN:
 			dev_dbg(&desc->intf->dev,
-				"nonzero urb status received: -ESHUTDOWN");
+				"nonzero urb status received: -ESHUTDOWN\n");
 			goto skip_error;
 		case -EPIPE:
-			dev_err(&desc->intf->dev,
+			dev_dbg(&desc->intf->dev,
 				"nonzero urb status received: -EPIPE\n");
 			break;
 		default:
@@ -188,7 +192,13 @@ static void wdm_in_callback(struct urb *urb)
 		}
 	}
 
-	desc->rerr = status;
+	/*
+	 * only set a new error if there is no previous error.
+	 * Errors are only cleared during read/open
+	 */
+	if (desc->rerr  == 0)
+		desc->rerr = status;
+
 	if (length + desc->length > desc->wMaxCommand) {
 		/* The buffer would overflow */
 		set_bit(WDM_OVERFLOW, &desc->flags);
@@ -200,10 +210,40 @@ static void wdm_in_callback(struct urb *urb)
 			desc->reslength = length;
 		}
 	}
+
+	/*
+	 * Handling devices with the WDM_DRAIN_ON_OPEN flag set:
+	 * If desc->resp_count is unset, then the urb was submitted
+	 * without a prior notification.  If the device returned any
+	 * data, then this implies that it had messages queued without
+	 * notifying us.  Continue reading until that queue is flushed.
+	 */
+	if (!desc->resp_count) {
+		if (!length) {
+			/* do not propagate the expected -EPIPE */
+			desc->rerr = 0;
+			goto unlock;
+		}
+		dev_dbg(&desc->intf->dev, "got %d bytes without notification\n", length);
+		set_bit(WDM_RESPONDING, &desc->flags);
+		usb_submit_urb(desc->response, GFP_ATOMIC);
+	}
+
 skip_error:
+	set_bit(WDM_READ, &desc->flags);
 	wake_up(&desc->wait);
 
-	set_bit(WDM_READ, &desc->flags);
+	if (desc->rerr) {
+		/*
+		 * Since there was an error, userspace may decide to not read
+		 * any data after poll'ing.
+		 * We should respond to further attempts from the device to send
+		 * data, so that we can get unstuck.
+		 */
+		service_outstanding_interrupt(desc);
+	}
+
+unlock:
 	spin_unlock(&desc->iuspin);
 }
 
@@ -244,18 +284,18 @@ static void wdm_int_callback(struct urb *urb)
 	switch (dr->bNotificationType) {
 	case USB_CDC_NOTIFY_RESPONSE_AVAILABLE:
 		dev_dbg(&desc->intf->dev,
-			"NOTIFY_RESPONSE_AVAILABLE received: index %d len %d",
+			"NOTIFY_RESPONSE_AVAILABLE received: index %d len %d\n",
 			le16_to_cpu(dr->wIndex), le16_to_cpu(dr->wLength));
 		break;
 
 	case USB_CDC_NOTIFY_NETWORK_CONNECTION:
 
 		dev_dbg(&desc->intf->dev,
-			"NOTIFY_NETWORK_CONNECTION %s network",
+			"NOTIFY_NETWORK_CONNECTION %s network\n",
 			dr->wValue ? "connected to" : "disconnected from");
 		goto exit;
 	case USB_CDC_NOTIFY_SPEED_CHANGE:
-		dev_dbg(&desc->intf->dev, "SPEED_CHANGE received (len %u)",
+		dev_dbg(&desc->intf->dev, "SPEED_CHANGE received (len %u)\n",
 			urb->actual_length);
 		goto exit;
 	default:
@@ -274,8 +314,7 @@ static void wdm_int_callback(struct urb *urb)
 		&& !test_bit(WDM_DISCONNECTING, &desc->flags)
 		&& !test_bit(WDM_SUSPENDING, &desc->flags)) {
 		rv = usb_submit_urb(desc->response, GFP_ATOMIC);
-		dev_dbg(&desc->intf->dev, "%s: usb_submit_urb %d",
-			__func__, rv);
+		dev_dbg(&desc->intf->dev, "submit response URB %d\n", rv);
 	}
 	spin_unlock(&desc->iuspin);
 	if (rv < 0) {
@@ -417,7 +456,7 @@ static ssize_t wdm_write
 		rv = usb_translate_errors(rv);
 		goto out_free_mem_pm;
 	} else {
-		dev_dbg(&desc->intf->dev, "Tx URB has been submitted index=%d",
+		dev_dbg(&desc->intf->dev, "Tx URB has been submitted index=%d\n",
 			le16_to_cpu(req->wIndex));
 	}
 
@@ -436,17 +475,14 @@ out_free_mem:
 }
 
 /*
- * clear WDM_READ flag and possibly submit the read urb if resp_count
- * is non-zero.
+ * Submit the read urb if resp_count is non-zero.
  *
  * Called with desc->iuspin locked
  */
-static int clear_wdm_read_flag(struct wdm_device *desc)
+static int service_outstanding_interrupt(struct wdm_device *desc)
 {
 	int rv = 0;
 
-	clear_bit(WDM_READ, &desc->flags);
-
 	/* submit read urb only if the device is waiting for it */
 	if (!desc->resp_count || !--desc->resp_count)
 		goto out;
@@ -537,8 +573,9 @@ retry:
 		}
 
 		if (!desc->reslength) { /* zero length read */
-			dev_dbg(&desc->intf->dev, "%s: zero length - clearing WDM_READ\n", __func__);
-			rv = clear_wdm_read_flag(desc);
+			dev_dbg(&desc->intf->dev, "zero length - clearing WDM_READ\n");
+			clear_bit(WDM_READ, &desc->flags);
+			rv = service_outstanding_interrupt(desc);
 			spin_unlock_irq(&desc->iuspin);
 			if (rv < 0)
 				goto err;
@@ -563,8 +600,10 @@ retry:
 
 	desc->length -= cntr;
 	/* in case we had outstanding data */
-	if (!desc->length)
-		clear_wdm_read_flag(desc);
+	if (!desc->length) {
+		clear_bit(WDM_READ, &desc->flags);
+		service_outstanding_interrupt(desc);
+	}
 	spin_unlock_irq(&desc->iuspin);
 	rv = cntr;
 
@@ -647,6 +686,17 @@ static int wdm_open(struct inode *inode, struct file *file)
 			dev_err(&desc->intf->dev,
 				"Error submitting int urb - %d\n", rv);
 			rv = usb_translate_errors(rv);
+		} else if (test_bit(WDM_DRAIN_ON_OPEN, &desc->flags)) {
+			/*
+			 * Some devices keep pending messages queued
+			 * without resending notifications.  We must
+			 * flush the message queue before we can
+			 * assume a one-to-one relationship between
+			 * notifications and messages in the queue
+			 */
+			dev_dbg(&desc->intf->dev, "draining queued data\n");
+			set_bit(WDM_RESPONDING, &desc->flags);
+			rv = usb_submit_urb(desc->response, GFP_KERNEL);
 		}
 	} else {
 		rv = 0;
@@ -673,7 +723,7 @@ static int wdm_release(struct inode *inode, struct file *file)
 
 	if (!desc->count) {
 		if (!test_bit(WDM_DISCONNECTING, &desc->flags)) {
-			dev_dbg(&desc->intf->dev, "wdm_release: cleanup");
+			dev_dbg(&desc->intf->dev, "wdm_release: cleanup\n");
 			kill_urbs(desc);
 			spin_lock_irq(&desc->iuspin);
 			desc->resp_count = 0;
@@ -753,7 +803,8 @@ static void wdm_rxwork(struct work_struct *work)
 /* --- hotplug --- */
 
 static int wdm_create(struct usb_interface *intf, struct usb_endpoint_descriptor *ep,
-		u16 bufsize, int (*manage_power)(struct usb_interface *, int))
+		u16 bufsize, int (*manage_power)(struct usb_interface *, int),
+		bool drain_on_open)
 {
 	int rv = -ENOMEM;
 	struct wdm_device *desc;
@@ -840,6 +891,68 @@ static int wdm_create(struct usb_interface *intf, struct usb_endpoint_descriptor
 
 	desc->manage_power = manage_power;
 
+	/*
+	 * "drain_on_open" enables a hack to work around a firmware
+	 * issue observed on network functions, in particular MBIM
+	 * functions.
+	 *
+	 * Quoting section 7 of the CDC-WMC r1.1 specification:
+	 *
+	 *  "The firmware shall interpret GetEncapsulatedResponse as a
+	 *   request to read response bytes. The firmware shall send
+	 *   the next wLength bytes from the response. The firmware
+	 *   shall allow the host to retrieve data using any number of
+	 *   GetEncapsulatedResponse requests. The firmware shall
+	 *   return a zero- length reply if there are no data bytes
+	 *   available.
+	 *
+	 *   The firmware shall send ResponseAvailable notifications
+	 *   periodically, using any appropriate algorithm, to inform
+	 *   the host that there is data available in the reply
+	 *   buffer. The firmware is allowed to send ResponseAvailable
+	 *   notifications even if there is no data available, but
+	 *   this will obviously reduce overall performance."
+	 *
+	 * These requirements, although they make equally sense, are
+	 * often not implemented by network functions. Some firmwares
+	 * will queue data indefinitely, without ever resending a
+	 * notification. The result is that the driver and firmware
+	 * loses "syncronization" if the driver ever fails to respond
+	 * to a single notification, something which easily can happen
+	 * on release(). When this happens, the driver will appear to
+	 * never receive notifications for the most current data. Each
+	 * notification will only cause a single read, which returns
+	 * the oldest data in the firmware's queue.
+	 *
+	 * The "drain_on_open" hack resolves the situation by draining
+	 * data from the firmware until none is returned, without a
+	 * prior notification.
+	 *
+	 * This will inevitably race with the firmware, risking that
+	 * we read data from the device before handling the associated
+	 * notification. To make things worse, some of the devices
+	 * needing the hack do not implement the "return zero if no
+	 * data is available" requirement either. Instead they return
+	 * an error on the subsequent read in this case.  This means
+	 * that "winning" the race can cause an unexpected EIO to
+	 * userspace.
+	 *
+	 * "winning" the race is more likely on resume() than on
+	 * open(), and the unexpected error is more harmful in the
+	 * middle of an open session. The hack is therefore only
+	 * applied on open(), and not on resume() where it logically
+	 * would be equally necessary. So we define open() as the only
+	 * driver <-> device "syncronization point".  Should we happen
+	 * to lose a notification after open(), then syncronization
+	 * will be lost until release()
+	 *
+	 * The hack should not be enabled for CDC WDM devices
+	 * conforming to the CDC-WMC r1.1 specification.  This is
+	 * ensured by setting drain_on_open to false in wdm_probe().
+	 */
+	if (drain_on_open)
+		set_bit(WDM_DRAIN_ON_OPEN, &desc->flags);
+
 	spin_lock(&wdm_device_list_lock);
 	list_add(&desc->device_list, &wdm_device_list);
 	spin_unlock(&wdm_device_list_lock);
@@ -893,7 +1006,7 @@ static int wdm_probe(struct usb_interface *intf, const struct usb_device_id *id)
 		goto err;
 	ep = &iface->endpoint[0].desc;
 
-	rv = wdm_create(intf, ep, maxcom, &wdm_manage_power);
+	rv = wdm_create(intf, ep, maxcom, &wdm_manage_power, false);
 
 err:
 	return rv;
@@ -925,7 +1038,7 @@ struct usb_driver *usb_cdc_wdm_register(struct usb_interface *intf,
 {
 	int rv = -EINVAL;
 
-	rv = wdm_create(intf, ep, bufsize, manage_power);
+	rv = wdm_create(intf, ep, bufsize, manage_power, true);
 	if (rv < 0)
 		goto err;
 
@@ -967,7 +1080,7 @@ static void wdm_disconnect(struct usb_interface *intf)
 	if (!desc->count)
 		cleanup(desc);
 	else
-		dev_dbg(&intf->dev, "%s: %d open files - postponing cleanup\n", __func__, desc->count);
+		dev_dbg(&intf->dev, "%d open files - postponing cleanup\n", desc->count);
 	mutex_unlock(&wdm_mutex);
 }
 

drivers/usb/class/usbtmc.c

@@ -141,6 +141,7 @@ static void usbtmc_delete(struct kref *kref)
 	struct usbtmc_device_data *data = to_usbtmc_data(kref);
 
 	usb_put_dev(data->usb_dev);
+	kfree(data);
 }
 
 static int usbtmc_open(struct inode *inode, struct file *filp)
@@ -1379,7 +1380,7 @@ static int usbtmc_probe(struct usb_interface *intf,
 
 	dev_dbg(&intf->dev, "%s called\n", __func__);
 
-	data = devm_kzalloc(&intf->dev, sizeof(*data), GFP_KERNEL);
+	data = kmalloc(sizeof(*data), GFP_KERNEL);
 	if (!data)
 		return -ENOMEM;
 
@@ -1467,10 +1468,8 @@ static int usbtmc_probe(struct usb_interface *intf,
 	if (data->iin_ep_present) {
 		/* allocate int urb */
 		data->iin_urb = usb_alloc_urb(0, GFP_KERNEL);
-		if (!data->iin_urb) {
-			dev_err(&intf->dev, "Failed to allocate int urb\n");
+		if (!data->iin_urb)
 			goto error_register;
-		}
 
 		/* will reference data in int urb */
 		kref_get(&data->kref);
@@ -1478,10 +1477,8 @@ static int usbtmc_probe(struct usb_interface *intf,
 		/* allocate buffer for interrupt in */
 		data->iin_buffer = kmalloc(data->iin_wMaxPacketSize,
 					GFP_KERNEL);
-		if (!data->iin_buffer) {
-			dev_err(&intf->dev, "Failed to allocate int buf\n");
+		if (!data->iin_buffer)
 			goto error_register;
-		}
 
 		/* fill interrupt urb */
 		usb_fill_int_urb(data->iin_urb, data->usb_dev,