arm: use the new LED disk activity trigger

- dts: rename 'ide-disk' to 'disk-activity'
- platform: rename 'ide-disk' to 'disk-activity'
- defconfig: rename 'LEDS_TRIGGER_IDE_DISK' to 'LEDS_TRIGGER_DISK'

Signed-off-by: Stephan Linz <linz@li-pro.net>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>

arch/arm/boot/dts/am57xx-beagle-x15.dts

@@ -86,7 +86,7 @@
 		led@3 {
 			label = "beagle-x15:usr3";
 			gpios = <&gpio7 15 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "ide-disk";
+			linux,default-trigger = "disk-activity";
 			default-state = "off";
 		};
 	};

arch/arm/boot/dts/kirkwood-ns2lite.dts

@@ -26,7 +26,7 @@
 		blue-sata {
 			label = "ns2:blue:sata";
 			gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "ide-disk";
+			linux,default-trigger = "disk-activity";
 		};
 	};
 };

arch/arm/boot/dts/kirkwood-topkick.dts

@@ -129,7 +129,7 @@
 		disk {
 			label = "topkick:yellow:disk";
 			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "ide-disk";
+			linux,default-trigger = "disk-activity";
 		};
 		system2 {
 			label = "topkick:red:system";

arch/arm/configs/collie_defconfig

@@ -76,7 +76,7 @@ CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_LOCOMO=y
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_IDE_DISK=y
+CONFIG_LEDS_TRIGGER_DISK=y
 # CONFIG_DNOTIFY is not set
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y

arch/arm/configs/ixp4xx_defconfig

@@ -180,7 +180,7 @@ CONFIG_LEDS_FSG=y
 CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_IDE_DISK=y
+CONFIG_LEDS_TRIGGER_DISK=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_ISL1208=y

arch/arm/mach-davinci/board-dm644x-evm.c

@@ -288,7 +288,7 @@ static struct gpio_led evm_leds[] = {
 	{ .name = "DS2", .active_low = 1,
 		.default_trigger = "mmc0", },
 	{ .name = "DS1", .active_low = 1,
-		.default_trigger = "ide-disk", },
+		.default_trigger = "disk-activity", },
 };
 
 static const struct gpio_led_platform_data evm_led_data = {

arch/arm/mach-omap1/board-osk.c

@@ -172,7 +172,7 @@ static struct gpio_led tps_leds[] = {
 	 * Also, D9 requires non-battery power.
 	 */
 	{ .gpio = OSK_TPS_GPIO_LED_D9, .name = "d9",
-			.default_trigger = "ide-disk", },
+			.default_trigger = "disk-activity", },
 	{ .gpio = OSK_TPS_GPIO_LED_D2, .name = "d2", },
 	{ .gpio = OSK_TPS_GPIO_LED_D3, .name = "d3", .active_low = 1,
 			.default_trigger = "heartbeat", },

arch/arm/mach-pxa/spitz.c

@@ -464,7 +464,7 @@ static struct gpio_led spitz_gpio_leds[] = {
 	},
 	{
 		.name			= "spitz:green:hddactivity",
-		.default_trigger	= "ide-disk",
+		.default_trigger	= "disk-activity",
 		.gpio			= SPITZ_GPIO_LED_GREEN,
 	},
 };