pcmcia: db1xxx_ss: fix last irq_to_gpio user

remove the usage of removed irq_to_gpio() function.  On pre-DB1200
boards, pass the actual carddetect GPIO number instead of the IRQ,
because we need the gpio to actually test card status (inserted or
not) and can get the irq number with gpio_to_irq() instead.

Tested on DB1300 and DB1500, this patch fixes PCMCIA on the DB1500,
which used irq_to_gpio().

Fixes: 832f5dacfa0b ("MIPS: Remove all the uses of custom gpio.h")
Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-pcmcia@lists.infradead.org
Cc: Linux-MIPS <linux-mips@linux-mips.org>
Cc: stable@vger.kernel.org	# v4.3+
Patchwork: https://patchwork.linux-mips.org/patch/12747/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

arch/mips/alchemy/devboards/db1000.c

@@ -503,15 +503,15 @@ int __init db1000_dev_setup(void)
 	if (board == BCSR_WHOAMI_DB1500) {
 		c0 = AU1500_GPIO2_INT;
 		c1 = AU1500_GPIO5_INT;
-		d0 = AU1500_GPIO0_INT;
-		d1 = AU1500_GPIO3_INT;
+		d0 = 0;	/* GPIO number, NOT irq! */
+		d1 = 3; /* GPIO number, NOT irq! */
 		s0 = AU1500_GPIO1_INT;
 		s1 = AU1500_GPIO4_INT;
 	} else if (board == BCSR_WHOAMI_DB1100) {
 		c0 = AU1100_GPIO2_INT;
 		c1 = AU1100_GPIO5_INT;
-		d0 = AU1100_GPIO0_INT;
-		d1 = AU1100_GPIO3_INT;
+		d0 = 0; /* GPIO number, NOT irq! */
+		d1 = 3; /* GPIO number, NOT irq! */
 		s0 = AU1100_GPIO1_INT;
 		s1 = AU1100_GPIO4_INT;
 
@@ -545,15 +545,15 @@ int __init db1000_dev_setup(void)
 	} else if (board == BCSR_WHOAMI_DB1000) {
 		c0 = AU1000_GPIO2_INT;
 		c1 = AU1000_GPIO5_INT;
-		d0 = AU1000_GPIO0_INT;
-		d1 = AU1000_GPIO3_INT;
+		d0 = 0; /* GPIO number, NOT irq! */
+		d1 = 3; /* GPIO number, NOT irq! */
 		s0 = AU1000_GPIO1_INT;
 		s1 = AU1000_GPIO4_INT;
 		platform_add_devices(db1000_devs, ARRAY_SIZE(db1000_devs));
 	} else if ((board == BCSR_WHOAMI_PB1500) ||
 		   (board == BCSR_WHOAMI_PB1500R2)) {
 		c0 = AU1500_GPIO203_INT;
-		d0 = AU1500_GPIO201_INT;
+		d0 = 1; /* GPIO number, NOT irq! */
 		s0 = AU1500_GPIO202_INT;
 		twosocks = 0;
 		flashsize = 64;
@@ -566,7 +566,7 @@ int __init db1000_dev_setup(void)
 		 */
 	} else if (board == BCSR_WHOAMI_PB1100) {
 		c0 = AU1100_GPIO11_INT;
-		d0 = AU1100_GPIO9_INT;
+		d0 = 9; /* GPIO number, NOT irq! */
 		s0 = AU1100_GPIO10_INT;
 		twosocks = 0;
 		flashsize = 64;
@@ -583,7 +583,6 @@ int __init db1000_dev_setup(void)
 	} else
 		return 0; /* unknown board, no further dev setup to do */
 
-	irq_set_irq_type(d0, IRQ_TYPE_EDGE_BOTH);
 	irq_set_irq_type(c0, IRQ_TYPE_LEVEL_LOW);
 	irq_set_irq_type(s0, IRQ_TYPE_LEVEL_LOW);
 
@@ -597,7 +596,6 @@ int __init db1000_dev_setup(void)
 		c0, d0, /*s0*/0, 0, 0);
 
 	if (twosocks) {
-		irq_set_irq_type(d1, IRQ_TYPE_EDGE_BOTH);
 		irq_set_irq_type(c1, IRQ_TYPE_LEVEL_LOW);
 		irq_set_irq_type(s1, IRQ_TYPE_LEVEL_LOW);
 

arch/mips/alchemy/devboards/db1550.c

@@ -514,7 +514,7 @@ static void __init db1550_devices(void)
 		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x000400000 - 1,
 		AU1000_PCMCIA_IO_PHYS_ADDR,
 		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x000010000 - 1,
-		AU1550_GPIO3_INT, AU1550_GPIO0_INT,
+		AU1550_GPIO3_INT, 0,
 		/*AU1550_GPIO21_INT*/0, 0, 0);
 
 	db1x_register_pcmcia_socket(
@@ -524,7 +524,7 @@ static void __init db1550_devices(void)
 		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x004400000 - 1,
 		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x004000000,
 		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x004010000 - 1,
-		AU1550_GPIO5_INT, AU1550_GPIO1_INT,
+		AU1550_GPIO5_INT, 1,
 		/*AU1550_GPIO22_INT*/0, 0, 1);
 
 	platform_device_register(&db1550_nand_dev);

drivers/pcmcia/db1xxx_ss.c

@@ -56,6 +56,7 @@ struct db1x_pcmcia_sock {
 	int	stschg_irq;	/* card-status-change irq */
 	int	card_irq;	/* card irq */
 	int	eject_irq;	/* db1200/pb1200 have these */
+	int	insert_gpio;	/* db1000 carddetect gpio */
 
 #define BOARD_TYPE_DEFAULT	0	/* most boards */
 #define BOARD_TYPE_DB1200	1	/* IRQs aren't gpios */
@@ -83,7 +84,7 @@ static int db1200_card_inserted(struct db1x_pcmcia_sock *sock)
 /* carddetect gpio: low-active */
 static int db1000_card_inserted(struct db1x_pcmcia_sock *sock)
 {
-	return !gpio_get_value(irq_to_gpio(sock->insert_irq));
+	return !gpio_get_value(sock->insert_gpio);
 }
 
 static int db1x_card_inserted(struct db1x_pcmcia_sock *sock)
@@ -457,9 +458,15 @@ static int db1x_pcmcia_socket_probe(struct platform_device *pdev)
 	r = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "card");
 	sock->card_irq = r ? r->start : 0;
 
-	/* insert: irq which triggers on card insertion/ejection */
+	/* insert: irq which triggers on card insertion/ejection
+	 * BIG FAT NOTE: on DB1000/1100/1500/1550 we pass a GPIO here!
+	 */
 	r = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "insert");
 	sock->insert_irq = r ? r->start : -1;
+	if (sock->board_type == BOARD_TYPE_DEFAULT) {
+		sock->insert_gpio = r ? r->start : -1;
+		sock->insert_irq = r ? gpio_to_irq(r->start) : -1;
+	}
 
 	/* stschg: irq which trigger on card status change (optional) */
 	r = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "stschg");