Merge branch 'pm-cpufreq'

* pm-cpufreq: (25 commits)
  dt-bindings: cpufreq: Document operating-points-v2-kryo-cpu
  cpufreq: Add Kryo CPU scaling driver
  cpufreq: Use static SRCU initializer
  kernel/SRCU: provide a static initializer
  cpufreq: Fix new policy initialization during limits updates via sysfs
  cpufreq: tegra20: Wrap cpufreq into platform driver
  cpufreq: tegra20: Allow cpufreq driver to be built as loadable module
  cpufreq: tegra20: Check if this is Tegra20 machine
  cpufreq: tegra20: Remove unneeded variable initialization
  cpufreq: tegra20: Remove unnecessary parentheses
  cpufreq: tegra20: Remove unneeded check in tegra_cpu_init
  cpufreq: tegra20: Release clocks properly
  cpufreq: tegra20: Remove EMC clock usage
  cpufreq: tegra20: Clean up included headers
  cpufreq: tegra20: Clean up whitespaces in the code
  cpufreq: tegra20: Change module description
  Revert "cpufreq: rcar: Add support for R8A7795 SoC"
  Revert "cpufreq: dt: Add r8a7796 support to to use generic cpufreq driver"
  cpufreq: intel_pstate: allow trace in passive mode
  cpufreq: optimize cpufreq_notify_transition()
  ...

Documentation/devicetree/bindings/opp/kryo-cpufreq.txt

@@ -0,0 +1,680 @@
+Qualcomm Technologies, Inc. KRYO CPUFreq and OPP bindings
+===================================
+
+In Certain Qualcomm Technologies, Inc. SoCs like apq8096 and msm8996
+that have KRYO processors, the CPU ferequencies subset and voltage value
+of each OPP varies based on the silicon variant in use.
+Qualcomm Technologies, Inc. Process Voltage Scaling Tables
+defines the voltage and frequency value based on the msm-id in SMEM
+and speedbin blown in the efuse combination.
+The qcom-cpufreq-kryo driver reads the msm-id and efuse value from the SoC
+to provide the OPP framework with required information (existing HW bitmap).
+This is used to determine the voltage and frequency value for each OPP of
+operating-points-v2 table when it is parsed by the OPP framework.
+
+Required properties:
+--------------------
+In 'cpus' nodes:
+- operating-points-v2: Phandle to the operating-points-v2 table to use.
+
+In 'operating-points-v2' table:
+- compatible: Should be
+	- 'operating-points-v2-kryo-cpu' for apq8096 and msm8996.
+- nvmem-cells: A phandle pointing to a nvmem-cells node representing the
+		efuse registers that has information about the
+		speedbin that is used to select the right frequency/voltage
+		value pair.
+		Please refer the for nvmem-cells
+		bindings Documentation/devicetree/bindings/nvmem/nvmem.txt
+		and also examples below.
+
+In every OPP node:
+- opp-supported-hw: A single 32 bit bitmap value, representing compatible HW.
+		    Bitmap:
+			0:	MSM8996 V3, speedbin 0
+			1:	MSM8996 V3, speedbin 1
+			2:	MSM8996 V3, speedbin 2
+			3:	unused
+			4:	MSM8996 SG, speedbin 0
+			5:	MSM8996 SG, speedbin 1
+			6:	MSM8996 SG, speedbin 2
+			7-31:	unused
+
+Example 1:
+---------
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "qcom,kryo";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			clocks = <&kryocc 0>;
+			cpu-supply = <&pm8994_s11_saw>;
+			operating-points-v2 = <&cluster0_opp>;
+			#cooling-cells = <2>;
+			next-level-cache = <&L2_0>;
+			L2_0: l2-cache {
+			      compatible = "cache";
+			      cache-level = <2>;
+			};
+		};
+
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "qcom,kryo";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			clocks = <&kryocc 0>;
+			cpu-supply = <&pm8994_s11_saw>;
+			operating-points-v2 = <&cluster0_opp>;
+			#cooling-cells = <2>;
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU2: cpu@100 {
+			device_type = "cpu";
+			compatible = "qcom,kryo";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			clocks = <&kryocc 1>;
+			cpu-supply = <&pm8994_s11_saw>;
+			operating-points-v2 = <&cluster1_opp>;
+			#cooling-cells = <2>;
+			next-level-cache = <&L2_1>;
+			L2_1: l2-cache {
+			      compatible = "cache";
+			      cache-level = <2>;
+			};
+		};
+
+		CPU3: cpu@101 {
+			device_type = "cpu";
+			compatible = "qcom,kryo";
+			reg = <0x0 0x101>;
+			enable-method = "psci";
+			clocks = <&kryocc 1>;
+			cpu-supply = <&pm8994_s11_saw>;
+			operating-points-v2 = <&cluster1_opp>;
+			#cooling-cells = <2>;
+			next-level-cache = <&L2_1>;
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&CPU2>;
+				};
+
+				core1 {
+					cpu = <&CPU3>;
+				};
+			};
+		};
+	};
+
+	cluster0_opp: opp_table0 {
+		compatible = "operating-points-v2-kryo-cpu";
+		nvmem-cells = <&speedbin_efuse>;
+		opp-shared;
+
+		opp-307200000 {
+			opp-hz = /bits/ 64 <307200000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x77>;
+			clock-latency-ns = <200000>;
+		};
+		opp-384000000 {
+			opp-hz = /bits/ 64 <384000000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-422400000 {
+			opp-hz = /bits/ 64 <422400000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-460800000 {
+			opp-hz = /bits/ 64 <460800000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-480000000 {
+			opp-hz = /bits/ 64 <480000000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-537600000 {
+			opp-hz = /bits/ 64 <537600000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-556800000 {
+			opp-hz = /bits/ 64 <556800000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-614400000 {
+			opp-hz = /bits/ 64 <614400000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-652800000 {
+			opp-hz = /bits/ 64 <652800000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-691200000 {
+			opp-hz = /bits/ 64 <691200000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-729600000 {
+			opp-hz = /bits/ 64 <729600000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-768000000 {
+			opp-hz = /bits/ 64 <768000000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-844800000 {
+			opp-hz = /bits/ 64 <844800000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x77>;
+			clock-latency-ns = <200000>;
+		};
+		opp-902400000 {
+			opp-hz = /bits/ 64 <902400000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-960000000 {
+			opp-hz = /bits/ 64 <960000000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-979200000 {
+			opp-hz = /bits/ 64 <979200000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1036800000 {
+			opp-hz = /bits/ 64 <1036800000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1056000000 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1113600000 {
+			opp-hz = /bits/ 64 <1113600000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1132800000 {
+			opp-hz = /bits/ 64 <1132800000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1190400000 {
+			opp-hz = /bits/ 64 <1190400000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1209600000 {
+			opp-hz = /bits/ 64 <1209600000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1228800000 {
+			opp-hz = /bits/ 64 <1228800000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1286400000 {
+			opp-hz = /bits/ 64 <1286400000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1324800000 {
+			opp-hz = /bits/ 64 <1324800000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x5>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1363200000 {
+			opp-hz = /bits/ 64 <1363200000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x72>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1401600000 {
+			opp-hz = /bits/ 64 <1401600000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x5>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1440000000 {
+			opp-hz = /bits/ 64 <1440000000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1478400000 {
+			opp-hz = /bits/ 64 <1478400000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x1>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1497600000 {
+			opp-hz = /bits/ 64 <1497600000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x4>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1516800000 {
+			opp-hz = /bits/ 64 <1516800000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1593600000 {
+			opp-hz = /bits/ 64 <1593600000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x71>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1996800000 {
+			opp-hz = /bits/ 64 <1996800000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x20>;
+			clock-latency-ns = <200000>;
+		};
+		opp-2188800000 {
+			opp-hz = /bits/ 64 <2188800000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x10>;
+			clock-latency-ns = <200000>;
+		};
+	};
+
+	cluster1_opp: opp_table1 {
+		compatible = "operating-points-v2-kryo-cpu";
+		nvmem-cells = <&speedbin_efuse>;
+		opp-shared;
+
+		opp-307200000 {
+			opp-hz = /bits/ 64 <307200000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x77>;
+			clock-latency-ns = <200000>;
+		};
+		opp-384000000 {
+			opp-hz = /bits/ 64 <384000000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-403200000 {
+			opp-hz = /bits/ 64 <403200000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-460800000 {
+			opp-hz = /bits/ 64 <460800000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-480000000 {
+			opp-hz = /bits/ 64 <480000000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-537600000 {
+			opp-hz = /bits/ 64 <537600000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-556800000 {
+			opp-hz = /bits/ 64 <556800000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-614400000 {
+			opp-hz = /bits/ 64 <614400000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-652800000 {
+			opp-hz = /bits/ 64 <652800000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-691200000 {
+			opp-hz = /bits/ 64 <691200000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-729600000 {
+			opp-hz = /bits/ 64 <729600000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-748800000 {
+			opp-hz = /bits/ 64 <748800000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-806400000 {
+			opp-hz = /bits/ 64 <806400000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-825600000 {
+			opp-hz = /bits/ 64 <825600000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-883200000 {
+			opp-hz = /bits/ 64 <883200000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-902400000 {
+			opp-hz = /bits/ 64 <902400000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-940800000 {
+			opp-hz = /bits/ 64 <940800000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-979200000 {
+			opp-hz = /bits/ 64 <979200000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1036800000 {
+			opp-hz = /bits/ 64 <1036800000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1056000000 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1113600000 {
+			opp-hz = /bits/ 64 <1113600000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1132800000 {
+			opp-hz = /bits/ 64 <1132800000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1190400000 {
+			opp-hz = /bits/ 64 <1190400000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1209600000 {
+			opp-hz = /bits/ 64 <1209600000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1248000000 {
+			opp-hz = /bits/ 64 <1248000000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1286400000 {
+			opp-hz = /bits/ 64 <1286400000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1324800000 {
+			opp-hz = /bits/ 64 <1324800000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1363200000 {
+			opp-hz = /bits/ 64 <1363200000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1401600000 {
+			opp-hz = /bits/ 64 <1401600000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1440000000 {
+			opp-hz = /bits/ 64 <1440000000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1478400000 {
+			opp-hz = /bits/ 64 <1478400000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1516800000 {
+			opp-hz = /bits/ 64 <1516800000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1555200000 {
+			opp-hz = /bits/ 64 <1555200000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1593600000 {
+			opp-hz = /bits/ 64 <1593600000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1632000000 {
+			opp-hz = /bits/ 64 <1632000000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1670400000 {
+			opp-hz = /bits/ 64 <1670400000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1708800000 {
+			opp-hz = /bits/ 64 <1708800000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1747200000 {
+			opp-hz = /bits/ 64 <1747200000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1785600000 {
+			opp-hz = /bits/ 64 <1785600000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1804800000 {
+			opp-hz = /bits/ 64 <1804800000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x6>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1824000000 {
+			opp-hz = /bits/ 64 <1824000000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x71>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1900800000 {
+			opp-hz = /bits/ 64 <1900800000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x74>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1920000000 {
+			opp-hz = /bits/ 64 <1920000000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x1>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1977600000 {
+			opp-hz = /bits/ 64 <1977600000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x30>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1996800000 {
+			opp-hz = /bits/ 64 <1996800000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x1>;
+			clock-latency-ns = <200000>;
+		};
+		opp-2054400000 {
+			opp-hz = /bits/ 64 <2054400000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x30>;
+			clock-latency-ns = <200000>;
+		};
+		opp-2073600000 {
+			opp-hz = /bits/ 64 <2073600000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x1>;
+			clock-latency-ns = <200000>;
+		};
+		opp-2150400000 {
+			opp-hz = /bits/ 64 <2150400000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x31>;
+			clock-latency-ns = <200000>;
+		};
+		opp-2246400000 {
+			opp-hz = /bits/ 64 <2246400000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x10>;
+			clock-latency-ns = <200000>;
+		};
+		opp-2342400000 {
+			opp-hz = /bits/ 64 <2342400000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x10>;
+			clock-latency-ns = <200000>;
+		};
+	};
+
+....
+
+reserved-memory {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	ranges;
+....
+	smem_mem: smem-mem@86000000 {
+		reg = <0x0 0x86000000 0x0 0x200000>;
+		no-map;
+	};
+....
+};
+
+smem {
+	compatible = "qcom,smem";
+	memory-region = <&smem_mem>;
+	hwlocks = <&tcsr_mutex 3>;
+};
+
+soc {
+....
+	qfprom: qfprom@74000 {
+		compatible = "qcom,qfprom";
+		reg = <0x00074000 0x8ff>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		....
+		speedbin_efuse: speedbin@133 {
+			reg = <0x133 0x1>;
+			bits = <5 3>;
+		};
+	};
+};

MAINTAINERS

@@ -11654,6 +11654,13 @@ F:	Documentation/devicetree/bindings/media/qcom,camss.txt
 F:	Documentation/media/v4l-drivers/qcom_camss.rst
 F:	drivers/media/platform/qcom/camss-8x16/
 
+QUALCOMM CPUFREQ DRIVER MSM8996/APQ8096
+M:  Ilia Lin <ilia.lin@gmail.com>
+L:  linux-pm@vger.kernel.org
+S:  Maintained
+F:  Documentation/devicetree/bindings/opp/kryo-cpufreq.txt
+F:  drivers/cpufreq/qcom-cpufreq-kryo.c
+
 QUALCOMM EMAC GIGABIT ETHERNET DRIVER
 M:	Timur Tabi <timur@codeaurora.org>
 L:	netdev@vger.kernel.org

drivers/cpufreq/Kconfig.arm

@@ -124,6 +124,17 @@ config ARM_OMAP2PLUS_CPUFREQ
 	depends on ARCH_OMAP2PLUS
 	default ARCH_OMAP2PLUS
 
+config ARM_QCOM_CPUFREQ_KRYO
+	bool "Qualcomm Kryo based CPUFreq"
+	depends on ARM64
+	depends on QCOM_QFPROM
+	depends on QCOM_SMEM
+	select PM_OPP
+	help
+	  This adds the CPUFreq driver for Qualcomm Kryo SoC based boards.
+
+	  If in doubt, say N.
+
 config ARM_S3C_CPUFREQ
 	bool
 	help
@@ -264,7 +275,7 @@ config ARM_TANGO_CPUFREQ
 	default y
 
 config ARM_TEGRA20_CPUFREQ
-	bool "Tegra20 CPUFreq support"
+	tristate "Tegra20 CPUFreq support"
 	depends on ARCH_TEGRA
 	default y
 	help

drivers/cpufreq/Makefile

@@ -65,6 +65,7 @@ obj-$(CONFIG_MACH_MVEBU_V7)		+= mvebu-cpufreq.o
 obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ)	+= omap-cpufreq.o
 obj-$(CONFIG_ARM_PXA2xx_CPUFREQ)	+= pxa2xx-cpufreq.o
 obj-$(CONFIG_PXA3xx)			+= pxa3xx-cpufreq.o
+obj-$(CONFIG_ARM_QCOM_CPUFREQ_KRYO)	+= qcom-cpufreq-kryo.o
 obj-$(CONFIG_ARM_S3C2410_CPUFREQ)	+= s3c2410-cpufreq.o
 obj-$(CONFIG_ARM_S3C2412_CPUFREQ)	+= s3c2412-cpufreq.o
 obj-$(CONFIG_ARM_S3C2416_CPUFREQ)	+= s3c2416-cpufreq.o

drivers/cpufreq/armada-37xx-cpufreq.c

@@ -23,6 +23,8 @@
 #include <linux/regmap.h>
 #include <linux/slab.h>
 
+#include "cpufreq-dt.h"
+
 /* Power management in North Bridge register set */
 #define ARMADA_37XX_NB_L0L1	0x18
 #define ARMADA_37XX_NB_L2L3	0x1C
@@ -56,6 +58,16 @@
  */
 #define LOAD_LEVEL_NR	4
 
+struct armada37xx_cpufreq_state {
+	struct regmap *regmap;
+	u32 nb_l0l1;
+	u32 nb_l2l3;
+	u32 nb_dyn_mod;
+	u32 nb_cpu_load;
+};
+
+static struct armada37xx_cpufreq_state *armada37xx_cpufreq_state;
+
 struct armada_37xx_dvfs {
 	u32 cpu_freq_max;
 	u8 divider[LOAD_LEVEL_NR];
@@ -136,7 +148,7 @@ static void __init armada37xx_cpufreq_dvfs_setup(struct regmap *base,
 	clk_set_parent(clk, parent);
 }
 
-static void __init armada37xx_cpufreq_disable_dvfs(struct regmap *base)
+static void armada37xx_cpufreq_disable_dvfs(struct regmap *base)
 {
 	unsigned int reg = ARMADA_37XX_NB_DYN_MOD,
 		mask = ARMADA_37XX_NB_DFS_EN;
@@ -162,10 +174,47 @@ static void __init armada37xx_cpufreq_enable_dvfs(struct regmap *base)
 	regmap_update_bits(base, reg, mask, mask);
 }
 
+static int armada37xx_cpufreq_suspend(struct cpufreq_policy *policy)
+{
+	struct armada37xx_cpufreq_state *state = armada37xx_cpufreq_state;
+
+	regmap_read(state->regmap, ARMADA_37XX_NB_L0L1, &state->nb_l0l1);
+	regmap_read(state->regmap, ARMADA_37XX_NB_L2L3, &state->nb_l2l3);
+	regmap_read(state->regmap, ARMADA_37XX_NB_CPU_LOAD,
+		    &state->nb_cpu_load);
+	regmap_read(state->regmap, ARMADA_37XX_NB_DYN_MOD, &state->nb_dyn_mod);
+
+	return 0;
+}
+
+static int armada37xx_cpufreq_resume(struct cpufreq_policy *policy)
+{
+	struct armada37xx_cpufreq_state *state = armada37xx_cpufreq_state;
+
+	/* Ensure DVFS is disabled otherwise the following registers are RO */
+	armada37xx_cpufreq_disable_dvfs(state->regmap);
+
+	regmap_write(state->regmap, ARMADA_37XX_NB_L0L1, state->nb_l0l1);
+	regmap_write(state->regmap, ARMADA_37XX_NB_L2L3, state->nb_l2l3);
+	regmap_write(state->regmap, ARMADA_37XX_NB_CPU_LOAD,
+		     state->nb_cpu_load);
+
+	/*
+	 * NB_DYN_MOD register is the one that actually enable back DVFS if it
+	 * was enabled before the suspend operation. This must be done last
+	 * otherwise other registers are not writable.
+	 */
+	regmap_write(state->regmap, ARMADA_37XX_NB_DYN_MOD, state->nb_dyn_mod);
+
+	return 0;
+}
+
 static int __init armada37xx_cpufreq_driver_init(void)
 {
+	struct cpufreq_dt_platform_data pdata;
 	struct armada_37xx_dvfs *dvfs;
 	struct platform_device *pdev;
+	unsigned long freq;
 	unsigned int cur_frequency;
 	struct regmap *nb_pm_base;
 	struct device *cpu_dev;
@@ -207,33 +256,58 @@ static int __init armada37xx_cpufreq_driver_init(void)
 	}
 
 	dvfs = armada_37xx_cpu_freq_info_get(cur_frequency);
-	if (!dvfs)
+	if (!dvfs) {
+		clk_put(clk);
 		return -EINVAL;
+	}
+
+	armada37xx_cpufreq_state = kmalloc(sizeof(*armada37xx_cpufreq_state),
+					   GFP_KERNEL);
+	if (!armada37xx_cpufreq_state) {
+		clk_put(clk);
+		return -ENOMEM;
+	}
+
+	armada37xx_cpufreq_state->regmap = nb_pm_base;
 
 	armada37xx_cpufreq_dvfs_setup(nb_pm_base, clk, dvfs->divider);
 	clk_put(clk);
 
 	for (load_lvl = ARMADA_37XX_DVFS_LOAD_0; load_lvl < LOAD_LEVEL_NR;
 	     load_lvl++) {
-		unsigned long freq = cur_frequency / dvfs->divider[load_lvl];
+		freq = cur_frequency / dvfs->divider[load_lvl];
 
 		ret = dev_pm_opp_add(cpu_dev, freq, 0);
-		if (ret) {
-			/* clean-up the already added opp before leaving */
-			while (load_lvl-- > ARMADA_37XX_DVFS_LOAD_0) {
-				freq = cur_frequency / dvfs->divider[load_lvl];
-				dev_pm_opp_remove(cpu_dev, freq);
-			}
-			return ret;
-		}
+		if (ret)
+			goto remove_opp;
 	}
 
 	/* Now that everything is setup, enable the DVFS at hardware level */
 	armada37xx_cpufreq_enable_dvfs(nb_pm_base);
 
-	pdev = platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
+	pdata.suspend = armada37xx_cpufreq_suspend;
+	pdata.resume = armada37xx_cpufreq_resume;
+
+	pdev = platform_device_register_data(NULL, "cpufreq-dt", -1, &pdata,
+					     sizeof(pdata));
+	ret = PTR_ERR_OR_ZERO(pdev);
+	if (ret)
+		goto disable_dvfs;
+
+	return 0;
+
+disable_dvfs:
+	armada37xx_cpufreq_disable_dvfs(nb_pm_base);
+remove_opp:
+	/* clean-up the already added opp before leaving */
+	while (load_lvl-- > ARMADA_37XX_DVFS_LOAD_0) {
+		freq = cur_frequency / dvfs->divider[load_lvl];
+		dev_pm_opp_remove(cpu_dev, freq);
+	}
+
+	kfree(armada37xx_cpufreq_state);
 
-	return PTR_ERR_OR_ZERO(pdev);
+	return ret;
 }
 /* late_initcall, to guarantee the driver is loaded after A37xx clock driver */
 late_initcall(armada37xx_cpufreq_driver_init);

drivers/cpufreq/cpufreq-dt-platdev.c

@@ -66,8 +66,6 @@ static const struct of_device_id whitelist[] __initconst = {
 	{ .compatible = "renesas,r8a7792", },
 	{ .compatible = "renesas,r8a7793", },
 	{ .compatible = "renesas,r8a7794", },
-	{ .compatible = "renesas,r8a7795", },
-	{ .compatible = "renesas,r8a7796", },
 	{ .compatible = "renesas,sh73a0", },
 
 	{ .compatible = "rockchip,rk2928", },
@@ -118,6 +116,9 @@ static const struct of_device_id blacklist[] __initconst = {
 
 	{ .compatible = "nvidia,tegra124", },
 
+	{ .compatible = "qcom,apq8096", },
+	{ .compatible = "qcom,msm8996", },
+
 	{ .compatible = "st,stih407", },
 	{ .compatible = "st,stih410", },
 

drivers/cpufreq/cpufreq-dt.c

@@ -346,8 +346,14 @@ static int dt_cpufreq_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	if (data && data->have_governor_per_policy)
-		dt_cpufreq_driver.flags |= CPUFREQ_HAVE_GOVERNOR_PER_POLICY;
+	if (data) {
+		if (data->have_governor_per_policy)
+			dt_cpufreq_driver.flags |= CPUFREQ_HAVE_GOVERNOR_PER_POLICY;
+
+		dt_cpufreq_driver.resume = data->resume;
+		if (data->suspend)
+			dt_cpufreq_driver.suspend = data->suspend;
+	}
 
 	ret = cpufreq_register_driver(&dt_cpufreq_driver);
 	if (ret)

drivers/cpufreq/cpufreq-dt.h

@@ -12,8 +12,13 @@
 
 #include <linux/types.h>
 
+struct cpufreq_policy;
+
 struct cpufreq_dt_platform_data {
 	bool have_governor_per_policy;
+
+	int (*suspend)(struct cpufreq_policy *policy);
+	int (*resume)(struct cpufreq_policy *policy);
 };
 
 #endif /* __CPUFREQ_DT_H__ */

drivers/cpufreq/cpufreq.c

@@ -89,16 +89,7 @@ static void cpufreq_governor_limits(struct cpufreq_policy *policy);
  * The mutex locks both lists.
  */
 static BLOCKING_NOTIFIER_HEAD(cpufreq_policy_notifier_list);
-static struct srcu_notifier_head cpufreq_transition_notifier_list;
-
-static bool init_cpufreq_transition_notifier_list_called;
-static int __init init_cpufreq_transition_notifier_list(void)
-{
-	srcu_init_notifier_head(&cpufreq_transition_notifier_list);
-	init_cpufreq_transition_notifier_list_called = true;
-	return 0;
-}
-pure_initcall(init_cpufreq_transition_notifier_list);
+SRCU_NOTIFIER_HEAD_STATIC(cpufreq_transition_notifier_list);
 
 static int off __read_mostly;
 static int cpufreq_disabled(void)
@@ -300,8 +291,19 @@ static void adjust_jiffies(unsigned long val, struct cpufreq_freqs *ci)
 #endif
 }
 
-static void __cpufreq_notify_transition(struct cpufreq_policy *policy,
-		struct cpufreq_freqs *freqs, unsigned int state)
+/**
+ * cpufreq_notify_transition - Notify frequency transition and adjust_jiffies.
+ * @policy: cpufreq policy to enable fast frequency switching for.
+ * @freqs: contain details of the frequency update.
+ * @state: set to CPUFREQ_PRECHANGE or CPUFREQ_POSTCHANGE.
+ *
+ * This function calls the transition notifiers and the "adjust_jiffies"
+ * function. It is called twice on all CPU frequency changes that have
+ * external effects.
+ */
+static void cpufreq_notify_transition(struct cpufreq_policy *policy,
+				      struct cpufreq_freqs *freqs,
+				      unsigned int state)
 {
 	BUG_ON(irqs_disabled());
 
@@ -313,54 +315,44 @@ static void __cpufreq_notify_transition(struct cpufreq_policy *policy,
 		 state, freqs->new);
 
 	switch (state) {
-
 	case CPUFREQ_PRECHANGE:
-		/* detect if the driver reported a value as "old frequency"
+		/*
+		 * Detect if the driver reported a value as "old frequency"
 		 * which is not equal to what the cpufreq core thinks is
 		 * "old frequency".
 		 */
 		if (!(cpufreq_driver->flags & CPUFREQ_CONST_LOOPS)) {
-			if ((policy) && (policy->cpu == freqs->cpu) &&
-			    (policy->cur) && (policy->cur != freqs->old)) {
+			if (policy->cur && (policy->cur != freqs->old)) {
 				pr_debug("Warning: CPU frequency is %u, cpufreq assumed %u kHz\n",
 					 freqs->old, policy->cur);
 				freqs->old = policy->cur;
 			}
 		}
-		srcu_notifier_call_chain(&cpufreq_transition_notifier_list,
-				CPUFREQ_PRECHANGE, freqs);
+
+		for_each_cpu(freqs->cpu, policy->cpus) {
+			srcu_notifier_call_chain(&cpufreq_transition_notifier_list,
+						 CPUFREQ_PRECHANGE, freqs);
+		}
+
 		adjust_jiffies(CPUFREQ_PRECHANGE, freqs);
 		break;
 
 	case CPUFREQ_POSTCHANGE:
 		adjust_jiffies(CPUFREQ_POSTCHANGE, freqs);
-		pr_debug("FREQ: %lu - CPU: %lu\n",
-			 (unsigned long)freqs->new, (unsigned long)freqs->cpu);
-		trace_cpu_frequency(freqs->new, freqs->cpu);
+		pr_debug("FREQ: %u - CPUs: %*pbl\n", freqs->new,
+			 cpumask_pr_args(policy->cpus));
+
+		for_each_cpu(freqs->cpu, policy->cpus) {
+			trace_cpu_frequency(freqs->new, freqs->cpu);
+			srcu_notifier_call_chain(&cpufreq_transition_notifier_list,
+						 CPUFREQ_POSTCHANGE, freqs);
+		}
+
 		cpufreq_stats_record_transition(policy, freqs->new);
-		srcu_notifier_call_chain(&cpufreq_transition_notifier_list,
-				CPUFREQ_POSTCHANGE, freqs);
-		if (likely(policy) && likely(policy->cpu == freqs->cpu))
-			policy->cur = freqs->new;
-		break;
+		policy->cur = freqs->new;
 	}
 }
 
-/**
- * cpufreq_notify_transition - call notifier chain and adjust_jiffies
- * on frequency transition.
- *
- * This function calls the transition notifiers and the "adjust_jiffies"
- * function. It is called twice on all CPU frequency changes that have
- * external effects.
- */
-static void cpufreq_notify_transition(struct cpufreq_policy *policy,
-		struct cpufreq_freqs *freqs, unsigned int state)
-{
-	for_each_cpu(freqs->cpu, policy->cpus)
-		__cpufreq_notify_transition(policy, freqs, state);
-}
-
 /* Do post notifications when there are chances that transition has failed */
 static void cpufreq_notify_post_transition(struct cpufreq_policy *policy,
 		struct cpufreq_freqs *freqs, int transition_failed)
@@ -696,6 +688,8 @@ static ssize_t store_##file_name					\
 	struct cpufreq_policy new_policy;				\
 									\
 	memcpy(&new_policy, policy, sizeof(*policy));			\
+	new_policy.min = policy->user_policy.min;			\
+	new_policy.max = policy->user_policy.max;			\
 									\
 	ret = sscanf(buf, "%u", &new_policy.object);			\
 	if (ret != 1)							\
@@ -1764,8 +1758,6 @@ int cpufreq_register_notifier(struct notifier_block *nb, unsigned int list)
 	if (cpufreq_disabled())
 		return -EINVAL;
 
-	WARN_ON(!init_cpufreq_transition_notifier_list_called);
-
 	switch (list) {
 	case CPUFREQ_TRANSITION_NOTIFIER:
 		mutex_lock(&cpufreq_fast_switch_lock);

drivers/cpufreq/intel_pstate.c

@@ -1939,13 +1939,51 @@ static int intel_cpufreq_verify_policy(struct cpufreq_policy *policy)
 	return 0;
 }
 
+/* Use of trace in passive mode:
+ *
+ * In passive mode the trace core_busy field (also known as the
+ * performance field, and lablelled as such on the graphs; also known as
+ * core_avg_perf) is not needed and so is re-assigned to indicate if the
+ * driver call was via the normal or fast switch path. Various graphs
+ * output from the intel_pstate_tracer.py utility that include core_busy
+ * (or performance or core_avg_perf) have a fixed y-axis from 0 to 100%,
+ * so we use 10 to indicate the the normal path through the driver, and
+ * 90 to indicate the fast switch path through the driver.
+ * The scaled_busy field is not used, and is set to 0.
+ */
+
+#define	INTEL_PSTATE_TRACE_TARGET 10
+#define	INTEL_PSTATE_TRACE_FAST_SWITCH 90
+
+static void intel_cpufreq_trace(struct cpudata *cpu, unsigned int trace_type, int old_pstate)
+{
+	struct sample *sample;
+
+	if (!trace_pstate_sample_enabled())
+		return;
+
+	if (!intel_pstate_sample(cpu, ktime_get()))
+		return;
+
+	sample = &cpu->sample;
+	trace_pstate_sample(trace_type,
+		0,
+		old_pstate,
+		cpu->pstate.current_pstate,
+		sample->mperf,
+		sample->aperf,
+		sample->tsc,
+		get_avg_frequency(cpu),
+		fp_toint(cpu->iowait_boost * 100));
+}
+
 static int intel_cpufreq_target(struct cpufreq_policy *policy,
 				unsigned int target_freq,
 				unsigned int relation)
 {
 	struct cpudata *cpu = all_cpu_data[policy->cpu];
 	struct cpufreq_freqs freqs;
-	int target_pstate;
+	int target_pstate, old_pstate;
 
 	update_turbo_state();
 
@@ -1965,12 +2003,14 @@ static int intel_cpufreq_target(struct cpufreq_policy *policy,
 		break;
 	}
 	target_pstate = intel_pstate_prepare_request(cpu, target_pstate);
+	old_pstate = cpu->pstate.current_pstate;
 	if (target_pstate != cpu->pstate.current_pstate) {
 		cpu->pstate.current_pstate = target_pstate;
 		wrmsrl_on_cpu(policy->cpu, MSR_IA32_PERF_CTL,
 			      pstate_funcs.get_val(cpu, target_pstate));
 	}
 	freqs.new = target_pstate * cpu->pstate.scaling;
+	intel_cpufreq_trace(cpu, INTEL_PSTATE_TRACE_TARGET, old_pstate);
 	cpufreq_freq_transition_end(policy, &freqs, false);
 
 	return 0;
@@ -1980,13 +2020,15 @@ static unsigned int intel_cpufreq_fast_switch(struct cpufreq_policy *policy,
 					      unsigned int target_freq)
 {
 	struct cpudata *cpu = all_cpu_data[policy->cpu];
-	int target_pstate;
+	int target_pstate, old_pstate;
 
 	update_turbo_state();
 
 	target_pstate = DIV_ROUND_UP(target_freq, cpu->pstate.scaling);
 	target_pstate = intel_pstate_prepare_request(cpu, target_pstate);
+	old_pstate = cpu->pstate.current_pstate;
 	intel_pstate_update_pstate(cpu, target_pstate);
+	intel_cpufreq_trace(cpu, INTEL_PSTATE_TRACE_FAST_SWITCH, old_pstate);
 	return target_pstate * cpu->pstate.scaling;
 }
 

drivers/cpufreq/qcom-cpufreq-kryo.c

@@ -0,0 +1,212 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018, The Linux Foundation. All rights reserved.
+ */
+
+/*
+ * In Certain QCOM SoCs like apq8096 and msm8996 that have KRYO processors,
+ * the CPU frequency subset and voltage value of each OPP varies
+ * based on the silicon variant in use. Qualcomm Process Voltage Scaling Tables
+ * defines the voltage and frequency value based on the msm-id in SMEM
+ * and speedbin blown in the efuse combination.
+ * The qcom-cpufreq-kryo driver reads the msm-id and efuse value from the SoC
+ * to provide the OPP framework with required information.
+ * This is used to determine the voltage and frequency value for each OPP of
+ * operating-points-v2 table when it is parsed by the OPP framework.
+ */
+
+#include <linux/cpu.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm_opp.h>
+#include <linux/slab.h>
+#include <linux/soc/qcom/smem.h>
+
+#define MSM_ID_SMEM	137
+
+enum _msm_id {
+	MSM8996V3 = 0xF6ul,
+	APQ8096V3 = 0x123ul,
+	MSM8996SG = 0x131ul,
+	APQ8096SG = 0x138ul,
+};
+
+enum _msm8996_version {
+	MSM8996_V3,
+	MSM8996_SG,
+	NUM_OF_MSM8996_VERSIONS,
+};
+
+static enum _msm8996_version __init qcom_cpufreq_kryo_get_msm_id(void)
+{
+	size_t len;
+	u32 *msm_id;
+	enum _msm8996_version version;
+
+	msm_id = qcom_smem_get(QCOM_SMEM_HOST_ANY, MSM_ID_SMEM, &len);
+	if (IS_ERR(msm_id))
+		return NUM_OF_MSM8996_VERSIONS;
+
+	/* The first 4 bytes are format, next to them is the actual msm-id */
+	msm_id++;
+
+	switch ((enum _msm_id)*msm_id) {
+	case MSM8996V3:
+	case APQ8096V3:
+		version = MSM8996_V3;
+		break;
+	case MSM8996SG:
+	case APQ8096SG:
+		version = MSM8996_SG;
+		break;
+	default:
+		version = NUM_OF_MSM8996_VERSIONS;
+	}
+
+	return version;
+}
+
+static int qcom_cpufreq_kryo_probe(struct platform_device *pdev)
+{
+	struct opp_table *opp_tables[NR_CPUS] = {0};
+	struct platform_device *cpufreq_dt_pdev;
+	enum _msm8996_version msm8996_version;
+	struct nvmem_cell *speedbin_nvmem;
+	struct device_node *np;
+	struct device *cpu_dev;
+	unsigned cpu;
+	u8 *speedbin;
+	u32 versions;
+	size_t len;
+	int ret;
+
+	cpu_dev = get_cpu_device(0);
+	if (NULL == cpu_dev)
+		ret = -ENODEV;
+
+	msm8996_version = qcom_cpufreq_kryo_get_msm_id();
+	if (NUM_OF_MSM8996_VERSIONS == msm8996_version) {
+		dev_err(cpu_dev, "Not Snapdragon 820/821!");
+		return -ENODEV;
+	}
+
+	np = dev_pm_opp_of_get_opp_desc_node(cpu_dev);
+	if (IS_ERR(np))
+		return PTR_ERR(np);
+
+	ret = of_device_is_compatible(np, "operating-points-v2-kryo-cpu");
+	if (!ret) {
+		of_node_put(np);
+		return -ENOENT;
+	}
+
+	speedbin_nvmem = of_nvmem_cell_get(np, NULL);
+	of_node_put(np);
+	if (IS_ERR(speedbin_nvmem)) {
+		dev_err(cpu_dev, "Could not get nvmem cell: %ld\n",
+			PTR_ERR(speedbin_nvmem));
+		return PTR_ERR(speedbin_nvmem);
+	}
+
+	speedbin = nvmem_cell_read(speedbin_nvmem, &len);
+	nvmem_cell_put(speedbin_nvmem);
+
+	switch (msm8996_version) {
+	case MSM8996_V3:
+		versions = 1 << (unsigned int)(*speedbin);
+		break;
+	case MSM8996_SG:
+		versions = 1 << ((unsigned int)(*speedbin) + 4);
+		break;
+	default:
+		BUG();
+		break;
+	}
+
+	for_each_possible_cpu(cpu) {
+		cpu_dev = get_cpu_device(cpu);
+		if (NULL == cpu_dev) {
+			ret = -ENODEV;
+			goto free_opp;
+		}
+
+		opp_tables[cpu] = dev_pm_opp_set_supported_hw(cpu_dev,
+							      &versions, 1);
+		if (IS_ERR(opp_tables[cpu])) {
+			ret = PTR_ERR(opp_tables[cpu]);
+			dev_err(cpu_dev, "Failed to set supported hardware\n");
+			goto free_opp;
+		}
+	}
+
+	cpufreq_dt_pdev = platform_device_register_simple("cpufreq-dt", -1,
+							  NULL, 0);
+	if (!IS_ERR(cpufreq_dt_pdev))
+		return 0;
+
+	ret = PTR_ERR(cpufreq_dt_pdev);
+	dev_err(cpu_dev, "Failed to register platform device\n");
+
+free_opp:
+	for_each_possible_cpu(cpu) {
+		if (IS_ERR_OR_NULL(opp_tables[cpu]))
+			break;
+		dev_pm_opp_put_supported_hw(opp_tables[cpu]);
+	}
+
+	return ret;
+}
+
+static struct platform_driver qcom_cpufreq_kryo_driver = {
+	.probe = qcom_cpufreq_kryo_probe,
+	.driver = {
+		.name = "qcom-cpufreq-kryo",
+	},
+};
+
+static const struct of_device_id qcom_cpufreq_kryo_match_list[] __initconst = {
+	{ .compatible = "qcom,apq8096", },
+	{ .compatible = "qcom,msm8996", },
+};
+
+/*
+ * Since the driver depends on smem and nvmem drivers, which may
+ * return EPROBE_DEFER, all the real activity is done in the probe,
+ * which may be defered as well. The init here is only registering
+ * the driver and the platform device.
+ */
+static int __init qcom_cpufreq_kryo_init(void)
+{
+	struct device_node *np = of_find_node_by_path("/");
+	const struct of_device_id *match;
+	int ret;
+
+	if (!np)
+		return -ENODEV;
+
+	match = of_match_node(qcom_cpufreq_kryo_match_list, np);
+	of_node_put(np);
+	if (!match)
+		return -ENODEV;
+
+	ret = platform_driver_register(&qcom_cpufreq_kryo_driver);
+	if (unlikely(ret < 0))
+		return ret;
+
+	ret = PTR_ERR_OR_ZERO(platform_device_register_simple(
+		"qcom-cpufreq-kryo", -1, NULL, 0));
+	if (0 == ret)
+		return 0;
+
+	platform_driver_unregister(&qcom_cpufreq_kryo_driver);
+	return ret;
+}
+module_init(qcom_cpufreq_kryo_init);
+
+MODULE_DESCRIPTION("Qualcomm Technologies, Inc. Kryo CPUfreq driver");
+MODULE_LICENSE("GPL v2");

drivers/cpufreq/s3c2440-cpufreq.c

@@ -143,7 +143,7 @@ static void s3c2440_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
 {
 	unsigned long clkdiv, camdiv;
 
-	s3c_freq_dbg("%s: divsiors: h=%d, p=%d\n", __func__,
+	s3c_freq_dbg("%s: divisors: h=%d, p=%d\n", __func__,
 		     cfg->divs.h_divisor, cfg->divs.p_divisor);
 
 	clkdiv = __raw_readl(S3C2410_CLKDIVN);

drivers/cpufreq/speedstep-lib.c

@@ -252,7 +252,7 @@ EXPORT_SYMBOL_GPL(speedstep_get_frequency);
  *********************************************************************/
 
 /* Keep in sync with the x86_cpu_id tables in the different modules */
-unsigned int speedstep_detect_processor(void)
+enum speedstep_processor speedstep_detect_processor(void)
 {
 	struct cpuinfo_x86 *c = &cpu_data(0);
 	u32 ebx, msr_lo, msr_hi;

drivers/cpufreq/tegra20-cpufreq.c

@@ -16,16 +16,13 @@
  *
  */
 
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/sched.h>
+#include <linux/clk.h>
 #include <linux/cpufreq.h>
-#include <linux/delay.h>
-#include <linux/init.h>
 #include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
 
 static struct cpufreq_frequency_table freq_table[] = {
 	{ .frequency = 216000 },
@@ -39,25 +36,27 @@ static struct cpufreq_frequency_table freq_table[] = {
 	{ .frequency = CPUFREQ_TABLE_END },
 };
 
-#define NUM_CPUS	2
-
-static struct clk *cpu_clk;
-static struct clk *pll_x_clk;
-static struct clk *pll_p_clk;
-static struct clk *emc_clk;
-static bool pll_x_prepared;
+struct tegra20_cpufreq {
+	struct device *dev;
+	struct cpufreq_driver driver;
+	struct clk *cpu_clk;
+	struct clk *pll_x_clk;
+	struct clk *pll_p_clk;
+	bool pll_x_prepared;
+};
 
 static unsigned int tegra_get_intermediate(struct cpufreq_policy *policy,
 					   unsigned int index)
 {
-	unsigned int ifreq = clk_get_rate(pll_p_clk) / 1000;
+	struct tegra20_cpufreq *cpufreq = cpufreq_get_driver_data();
+	unsigned int ifreq = clk_get_rate(cpufreq->pll_p_clk) / 1000;
 
 	/*
 	 * Don't switch to intermediate freq if:
 	 * - we are already at it, i.e. policy->cur == ifreq
 	 * - index corresponds to ifreq
 	 */
-	if ((freq_table[index].frequency == ifreq) || (policy->cur == ifreq))
+	if (freq_table[index].frequency == ifreq || policy->cur == ifreq)
 		return 0;
 
 	return ifreq;
@@ -66,6 +65,7 @@ static unsigned int tegra_get_intermediate(struct cpufreq_policy *policy,
 static int tegra_target_intermediate(struct cpufreq_policy *policy,
 				     unsigned int index)
 {
+	struct tegra20_cpufreq *cpufreq = cpufreq_get_driver_data();
 	int ret;
 
 	/*
@@ -78,47 +78,37 @@ static int tegra_target_intermediate(struct cpufreq_policy *policy,
 	 * Also, we wouldn't be using pll_x anymore and must not take extra
 	 * reference to it, as it can be disabled now to save some power.
 	 */
-	clk_prepare_enable(pll_x_clk);
+	clk_prepare_enable(cpufreq->pll_x_clk);
 
-	ret = clk_set_parent(cpu_clk, pll_p_clk);
+	ret = clk_set_parent(cpufreq->cpu_clk, cpufreq->pll_p_clk);
 	if (ret)
-		clk_disable_unprepare(pll_x_clk);
+		clk_disable_unprepare(cpufreq->pll_x_clk);
 	else
-		pll_x_prepared = true;
+		cpufreq->pll_x_prepared = true;
 
 	return ret;
 }
 
 static int tegra_target(struct cpufreq_policy *policy, unsigned int index)
 {
+	struct tegra20_cpufreq *cpufreq = cpufreq_get_driver_data();
 	unsigned long rate = freq_table[index].frequency;
-	unsigned int ifreq = clk_get_rate(pll_p_clk) / 1000;
-	int ret = 0;
-
-	/*
-	 * Vote on memory bus frequency based on cpu frequency
-	 * This sets the minimum frequency, display or avp may request higher
-	 */
-	if (rate >= 816000)
-		clk_set_rate(emc_clk, 600000000); /* cpu 816 MHz, emc max */
-	else if (rate >= 456000)
-		clk_set_rate(emc_clk, 300000000); /* cpu 456 MHz, emc 150Mhz */
-	else
-		clk_set_rate(emc_clk, 100000000);  /* emc 50Mhz */
+	unsigned int ifreq = clk_get_rate(cpufreq->pll_p_clk) / 1000;
+	int ret;
 
 	/*
 	 * target freq == pll_p, don't need to take extra reference to pll_x_clk
 	 * as it isn't used anymore.
 	 */
 	if (rate == ifreq)
-		return clk_set_parent(cpu_clk, pll_p_clk);
+		return clk_set_parent(cpufreq->cpu_clk, cpufreq->pll_p_clk);
 
-	ret = clk_set_rate(pll_x_clk, rate * 1000);
+	ret = clk_set_rate(cpufreq->pll_x_clk, rate * 1000);
 	/* Restore to earlier frequency on error, i.e. pll_x */
 	if (ret)
-		pr_err("Failed to change pll_x to %lu\n", rate);
+		dev_err(cpufreq->dev, "Failed to change pll_x to %lu\n", rate);
 
-	ret = clk_set_parent(cpu_clk, pll_x_clk);
+	ret = clk_set_parent(cpufreq->cpu_clk, cpufreq->pll_x_clk);
 	/* This shouldn't fail while changing or restoring */
 	WARN_ON(ret);
 
@@ -126,9 +116,9 @@ static int tegra_target(struct cpufreq_policy *policy, unsigned int index)
 	 * Drop count to pll_x clock only if we switched to intermediate freq
 	 * earlier while transitioning to a target frequency.
 	 */
-	if (pll_x_prepared) {
-		clk_disable_unprepare(pll_x_clk);
-		pll_x_prepared = false;
+	if (cpufreq->pll_x_prepared) {
+		clk_disable_unprepare(cpufreq->pll_x_clk);
+		cpufreq->pll_x_prepared = false;
 	}
 
 	return ret;
@@ -136,81 +126,111 @@ static int tegra_target(struct cpufreq_policy *policy, unsigned int index)
 
 static int tegra_cpu_init(struct cpufreq_policy *policy)
 {
+	struct tegra20_cpufreq *cpufreq = cpufreq_get_driver_data();
 	int ret;
 
-	if (policy->cpu >= NUM_CPUS)
-		return -EINVAL;
-
-	clk_prepare_enable(emc_clk);
-	clk_prepare_enable(cpu_clk);
+	clk_prepare_enable(cpufreq->cpu_clk);
 
 	/* FIXME: what's the actual transition time? */
 	ret = cpufreq_generic_init(policy, freq_table, 300 * 1000);
 	if (ret) {
-		clk_disable_unprepare(cpu_clk);
-		clk_disable_unprepare(emc_clk);
+		clk_disable_unprepare(cpufreq->cpu_clk);
 		return ret;
 	}
 
-	policy->clk = cpu_clk;
+	policy->clk = cpufreq->cpu_clk;
 	policy->suspend_freq = freq_table[0].frequency;
 	return 0;
 }
 
 static int tegra_cpu_exit(struct cpufreq_policy *policy)
 {
-	clk_disable_unprepare(cpu_clk);
-	clk_disable_unprepare(emc_clk);
+	struct tegra20_cpufreq *cpufreq = cpufreq_get_driver_data();
+
+	clk_disable_unprepare(cpufreq->cpu_clk);
 	return 0;
 }
 
-static struct cpufreq_driver tegra_cpufreq_driver = {
-	.flags			= CPUFREQ_NEED_INITIAL_FREQ_CHECK,
-	.verify			= cpufreq_generic_frequency_table_verify,
-	.get_intermediate	= tegra_get_intermediate,
-	.target_intermediate	= tegra_target_intermediate,
-	.target_index		= tegra_target,
-	.get			= cpufreq_generic_get,
-	.init			= tegra_cpu_init,
-	.exit			= tegra_cpu_exit,
-	.name			= "tegra",
-	.attr			= cpufreq_generic_attr,
-	.suspend		= cpufreq_generic_suspend,
-};
-
-static int __init tegra_cpufreq_init(void)
+static int tegra20_cpufreq_probe(struct platform_device *pdev)
 {
-	cpu_clk = clk_get_sys(NULL, "cclk");
-	if (IS_ERR(cpu_clk))
-		return PTR_ERR(cpu_clk);
-
-	pll_x_clk = clk_get_sys(NULL, "pll_x");
-	if (IS_ERR(pll_x_clk))
-		return PTR_ERR(pll_x_clk);
-
-	pll_p_clk = clk_get_sys(NULL, "pll_p");
-	if (IS_ERR(pll_p_clk))
-		return PTR_ERR(pll_p_clk);
-
-	emc_clk = clk_get_sys("cpu", "emc");
-	if (IS_ERR(emc_clk)) {
-		clk_put(cpu_clk);
-		return PTR_ERR(emc_clk);
+	struct tegra20_cpufreq *cpufreq;
+	int err;
+
+	cpufreq = devm_kzalloc(&pdev->dev, sizeof(*cpufreq), GFP_KERNEL);
+	if (!cpufreq)
+		return -ENOMEM;
+
+	cpufreq->cpu_clk = clk_get_sys(NULL, "cclk");
+	if (IS_ERR(cpufreq->cpu_clk))
+		return PTR_ERR(cpufreq->cpu_clk);
+
+	cpufreq->pll_x_clk = clk_get_sys(NULL, "pll_x");
+	if (IS_ERR(cpufreq->pll_x_clk)) {
+		err = PTR_ERR(cpufreq->pll_x_clk);
+		goto put_cpu;
+	}
+
+	cpufreq->pll_p_clk = clk_get_sys(NULL, "pll_p");
+	if (IS_ERR(cpufreq->pll_p_clk)) {
+		err = PTR_ERR(cpufreq->pll_p_clk);
+		goto put_pll_x;
 	}
 
-	return cpufreq_register_driver(&tegra_cpufreq_driver);
+	cpufreq->dev = &pdev->dev;
+	cpufreq->driver.get = cpufreq_generic_get;
+	cpufreq->driver.attr = cpufreq_generic_attr;
+	cpufreq->driver.init = tegra_cpu_init;
+	cpufreq->driver.exit = tegra_cpu_exit;
+	cpufreq->driver.flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK;
+	cpufreq->driver.verify = cpufreq_generic_frequency_table_verify;
+	cpufreq->driver.suspend = cpufreq_generic_suspend;
+	cpufreq->driver.driver_data = cpufreq;
+	cpufreq->driver.target_index = tegra_target;
+	cpufreq->driver.get_intermediate = tegra_get_intermediate;
+	cpufreq->driver.target_intermediate = tegra_target_intermediate;
+	snprintf(cpufreq->driver.name, CPUFREQ_NAME_LEN, "tegra");
+
+	err = cpufreq_register_driver(&cpufreq->driver);
+	if (err)
+		goto put_pll_p;
+
+	platform_set_drvdata(pdev, cpufreq);
+
+	return 0;
+
+put_pll_p:
+	clk_put(cpufreq->pll_p_clk);
+put_pll_x:
+	clk_put(cpufreq->pll_x_clk);
+put_cpu:
+	clk_put(cpufreq->cpu_clk);
+
+	return err;
 }
 
-static void __exit tegra_cpufreq_exit(void)
+static int tegra20_cpufreq_remove(struct platform_device *pdev)
 {
-        cpufreq_unregister_driver(&tegra_cpufreq_driver);
-	clk_put(emc_clk);
-	clk_put(cpu_clk);
+	struct tegra20_cpufreq *cpufreq = platform_get_drvdata(pdev);
+
+	cpufreq_unregister_driver(&cpufreq->driver);
+
+	clk_put(cpufreq->pll_p_clk);
+	clk_put(cpufreq->pll_x_clk);
+	clk_put(cpufreq->cpu_clk);
+
+	return 0;
 }
 
+static struct platform_driver tegra20_cpufreq_driver = {
+	.probe		= tegra20_cpufreq_probe,
+	.remove		= tegra20_cpufreq_remove,
+	.driver		= {
+		.name	= "tegra20-cpufreq",
+	},
+};
+module_platform_driver(tegra20_cpufreq_driver);
 
+MODULE_ALIAS("platform:tegra20-cpufreq");
 MODULE_AUTHOR("Colin Cross <ccross@android.com>");
-MODULE_DESCRIPTION("cpufreq driver for Nvidia Tegra2");
+MODULE_DESCRIPTION("NVIDIA Tegra20 cpufreq driver");
 MODULE_LICENSE("GPL");
-module_init(tegra_cpufreq_init);
-module_exit(tegra_cpufreq_exit);

include/linux/notifier.h

@@ -43,9 +43,7 @@
  * in srcu_notifier_call_chain(): no cache bounces and no memory barriers.
  * As compensation, srcu_notifier_chain_unregister() is rather expensive.
  * SRCU notifier chains should be used when the chain will be called very
- * often but notifier_blocks will seldom be removed.  Also, SRCU notifier
- * chains are slightly more difficult to use because they require special
- * runtime initialization.
+ * often but notifier_blocks will seldom be removed.
  */
 
 struct notifier_block;
@@ -91,7 +89,7 @@ struct srcu_notifier_head {
 		(name)->head = NULL;		\
 	} while (0)
 
-/* srcu_notifier_heads must be initialized and cleaned up dynamically */
+/* srcu_notifier_heads must be cleaned up dynamically */
 extern void srcu_init_notifier_head(struct srcu_notifier_head *nh);
 #define srcu_cleanup_notifier_head(name)	\
 		cleanup_srcu_struct(&(name)->srcu);
@@ -104,7 +102,13 @@ extern void srcu_init_notifier_head(struct srcu_notifier_head *nh);
 		.head = NULL }
 #define RAW_NOTIFIER_INIT(name)	{				\
 		.head = NULL }
-/* srcu_notifier_heads cannot be initialized statically */
+
+#define SRCU_NOTIFIER_INIT(name, pcpu)				\
+	{							\
+		.mutex = __MUTEX_INITIALIZER(name.mutex),	\
+		.head = NULL,					\
+		.srcu = __SRCU_STRUCT_INIT(name.srcu, pcpu),	\
+	}
 
 #define ATOMIC_NOTIFIER_HEAD(name)				\
 	struct atomic_notifier_head name =			\
@@ -116,6 +120,26 @@ extern void srcu_init_notifier_head(struct srcu_notifier_head *nh);
 	struct raw_notifier_head name =				\
 		RAW_NOTIFIER_INIT(name)
 
+#ifdef CONFIG_TREE_SRCU
+#define _SRCU_NOTIFIER_HEAD(name, mod)				\
+	static DEFINE_PER_CPU(struct srcu_data,			\
+			name##_head_srcu_data);			\
+	mod struct srcu_notifier_head name =			\
+			SRCU_NOTIFIER_INIT(name, name##_head_srcu_data)
+
+#else
+#define _SRCU_NOTIFIER_HEAD(name, mod)				\
+	mod struct srcu_notifier_head name =			\
+			SRCU_NOTIFIER_INIT(name, name)
+
+#endif
+
+#define SRCU_NOTIFIER_HEAD(name)				\
+	_SRCU_NOTIFIER_HEAD(name, /* not static */)
+
+#define SRCU_NOTIFIER_HEAD_STATIC(name)				\
+	_SRCU_NOTIFIER_HEAD(name, static)
+
 #ifdef __KERNEL__
 
 extern int atomic_notifier_chain_register(struct atomic_notifier_head *nh,

include/linux/srcutiny.h

@@ -43,7 +43,7 @@ struct srcu_struct {
 
 void srcu_drive_gp(struct work_struct *wp);
 
-#define __SRCU_STRUCT_INIT(name)					\
+#define __SRCU_STRUCT_INIT(name, __ignored)				\
 {									\
 	.srcu_wq = __SWAIT_QUEUE_HEAD_INITIALIZER(name.srcu_wq),	\
 	.srcu_cb_tail = &name.srcu_cb_head,				\
@@ -56,9 +56,9 @@ void srcu_drive_gp(struct work_struct *wp);
  * Tree SRCU, which needs some per-CPU data.
  */
 #define DEFINE_SRCU(name) \
-	struct srcu_struct name = __SRCU_STRUCT_INIT(name)
+	struct srcu_struct name = __SRCU_STRUCT_INIT(name, name)
 #define DEFINE_STATIC_SRCU(name) \
-	static struct srcu_struct name = __SRCU_STRUCT_INIT(name)
+	static struct srcu_struct name = __SRCU_STRUCT_INIT(name, name)
 
 void synchronize_srcu(struct srcu_struct *sp);
 

include/linux/srcutree.h

@@ -104,9 +104,9 @@ struct srcu_struct {
 #define SRCU_STATE_SCAN1	1
 #define SRCU_STATE_SCAN2	2
 
-#define __SRCU_STRUCT_INIT(name)					\
+#define __SRCU_STRUCT_INIT(name, pcpu_name)				\
 	{								\
-		.sda = &name##_srcu_data,				\
+		.sda = &pcpu_name,					\
 		.lock = __SPIN_LOCK_UNLOCKED(name.lock),		\
 		.srcu_gp_seq_needed = 0 - 1,				\
 		__SRCU_DEP_MAP_INIT(name)				\
@@ -133,7 +133,7 @@ struct srcu_struct {
  */
 #define __DEFINE_SRCU(name, is_static)					\
 	static DEFINE_PER_CPU(struct srcu_data, name##_srcu_data);\
-	is_static struct srcu_struct name = __SRCU_STRUCT_INIT(name)
+	is_static struct srcu_struct name = __SRCU_STRUCT_INIT(name, name##_srcu_data)
 #define DEFINE_SRCU(name)		__DEFINE_SRCU(name, /* not static */)
 #define DEFINE_STATIC_SRCU(name)	__DEFINE_SRCU(name, static)