Merge tag 'arcnet-cleanup-v4.3-rc2' of git://git.pengutronix.de/git/mgr/linux

Michael Grzeschik says:

====================
ARCNET: refactoring and cleanup

This series cleans up the code in drivers/net/arcnet
and include/uapi/linux/if_arcnet.h . It doesn't change
the runtime behaviour of the code. Its only purpose
is to improve the code maintenance and readability.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

MAINTAINERS

@@ -7292,7 +7292,6 @@ S:	Odd Fixes
 F:	drivers/net/
 F:	include/linux/if_*
 F:	include/linux/netdevice.h
-F:	include/linux/arcdevice.h
 F:	include/linux/etherdevice.h
 F:	include/linux/fcdevice.h
 F:	include/linux/fddidevice.h

drivers/net/arcnet/arc-rawmode.c

@@ -1,6 +1,6 @@
 /*
  * Linux ARCnet driver - "raw mode" packet encapsulation (no soft headers)
- * 
+ *
  * Written 1994-1999 by Avery Pennarun.
  * Derived from skeleton.c by Donald Becker.
  *
@@ -24,6 +24,8 @@
  * **********************
  */
 
+#define pr_fmt(fmt) "arcnet:" KBUILD_MODNAME ": " fmt
+
 #include <linux/module.h>
 #include <linux/gfp.h>
 #include <linux/init.h>
@@ -31,58 +33,7 @@
 #include <net/arp.h>
 #include <linux/netdevice.h>
 #include <linux/skbuff.h>
-#include <linux/arcdevice.h>
-
-#define VERSION "arcnet: raw mode (`r') encapsulation support loaded.\n"
-
-
-static void rx(struct net_device *dev, int bufnum,
-	       struct archdr *pkthdr, int length);
-static int build_header(struct sk_buff *skb, struct net_device *dev,
-			unsigned short type, uint8_t daddr);
-static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length,
-		      int bufnum);
-
-static struct ArcProto rawmode_proto =
-{
-	.suffix		= 'r',
-	.mtu		= XMTU,
-	.rx		= rx,
-	.build_header	= build_header,
-	.prepare_tx	= prepare_tx,
-	.continue_tx    = NULL,
-	.ack_tx         = NULL
-};
-
-
-static int __init arcnet_raw_init(void)
-{
-	int count;
-
-	printk(VERSION);
-
-	for (count = 0; count < 256; count++)
-		if (arc_proto_map[count] == arc_proto_default)
-			arc_proto_map[count] = &rawmode_proto;
-
-	/* for raw mode, we only set the bcast proto if there's no better one */
-	if (arc_bcast_proto == arc_proto_default)
-		arc_bcast_proto = &rawmode_proto;
-
-	arc_proto_default = &rawmode_proto;
-	return 0;
-}
-
-static void __exit arcnet_raw_exit(void)
-{
-	arcnet_unregister_proto(&rawmode_proto);
-}
-
-module_init(arcnet_raw_init);
-module_exit(arcnet_raw_exit);
-
-MODULE_LICENSE("GPL");
-
+#include "arcdevice.h"
 
 /* packet receiver */
 static void rx(struct net_device *dev, int bufnum,
@@ -93,7 +44,7 @@ static void rx(struct net_device *dev, int bufnum,
 	struct archdr *pkt = pkthdr;
 	int ofs;
 
-	BUGMSG(D_DURING, "it's a raw packet (length=%d)\n", length);
+	arc_printk(D_DURING, dev, "it's a raw packet (length=%d)\n", length);
 
 	if (length > MTU)
 		ofs = 512 - length;
@@ -101,15 +52,14 @@ static void rx(struct net_device *dev, int bufnum,
 		ofs = 256 - length;
 
 	skb = alloc_skb(length + ARC_HDR_SIZE, GFP_ATOMIC);
-	if (skb == NULL) {
-		BUGMSG(D_NORMAL, "Memory squeeze, dropping packet.\n");
+	if (!skb) {
 		dev->stats.rx_dropped++;
 		return;
 	}
 	skb_put(skb, length + ARC_HDR_SIZE);
 	skb->dev = dev;
 
-	pkt = (struct archdr *) skb->data;
+	pkt = (struct archdr *)skb->data;
 
 	skb_reset_mac_header(skb);
 	skb_pull(skb, ARC_HDR_SIZE);
@@ -121,38 +71,35 @@ static void rx(struct net_device *dev, int bufnum,
 				      pkt->soft.raw + sizeof(pkt->soft),
 				      length - sizeof(pkt->soft));
 
-	BUGLVL(D_SKB) arcnet_dump_skb(dev, skb, "rx");
+	if (BUGLVL(D_SKB))
+		arcnet_dump_skb(dev, skb, "rx");
 
 	skb->protocol = cpu_to_be16(ETH_P_ARCNET);
 	netif_rx(skb);
 }
 
-
-/*
- * Create the ARCnet hard/soft headers for raw mode.
+/* Create the ARCnet hard/soft headers for raw mode.
  * There aren't any soft headers in raw mode - not even the protocol id.
  */
 static int build_header(struct sk_buff *skb, struct net_device *dev,
 			unsigned short type, uint8_t daddr)
 {
 	int hdr_size = ARC_HDR_SIZE;
-	struct archdr *pkt = (struct archdr *) skb_push(skb, hdr_size);
+	struct archdr *pkt = (struct archdr *)skb_push(skb, hdr_size);
 
-	/*
-	 * Set the source hardware address.
+	/* Set the source hardware address.
 	 *
 	 * This is pretty pointless for most purposes, but it can help in
-	 * debugging.  ARCnet does not allow us to change the source address in
-	 * the actual packet sent)
+	 * debugging.  ARCnet does not allow us to change the source address
+	 * in the actual packet sent.
 	 */
 	pkt->hard.source = *dev->dev_addr;
 
 	/* see linux/net/ethernet/eth.c to see where I got the following */
 
 	if (dev->flags & (IFF_LOOPBACK | IFF_NOARP)) {
-		/* 
-		 * FIXME: fill in the last byte of the dest ipaddr here to better
-		 * comply with RFC1051 in "noarp" mode.
+		/* FIXME: fill in the last byte of the dest ipaddr here
+		 * to better comply with RFC1051 in "noarp" mode.
 		 */
 		pkt->hard.dest = 0;
 		return hdr_size;
@@ -163,7 +110,6 @@ static int build_header(struct sk_buff *skb, struct net_device *dev,
 	return hdr_size;	/* success */
 }
 
-
 static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length,
 		      int bufnum)
 {
@@ -171,15 +117,16 @@ static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length,
 	struct arc_hardware *hard = &pkt->hard;
 	int ofs;
 
-	BUGMSG(D_DURING, "prepare_tx: txbufs=%d/%d/%d\n",
-	       lp->next_tx, lp->cur_tx, bufnum);
+	arc_printk(D_DURING, dev, "prepare_tx: txbufs=%d/%d/%d\n",
+		   lp->next_tx, lp->cur_tx, bufnum);
 
-	length -= ARC_HDR_SIZE;	/* hard header is not included in packet length */
+	/* hard header is not included in packet length */
+	length -= ARC_HDR_SIZE;
 
 	if (length > XMTU) {
 		/* should never happen! other people already check for this. */
-		BUGMSG(D_NORMAL, "Bug!  prepare_tx with size %d (> %d)\n",
-		       length, XMTU);
+		arc_printk(D_NORMAL, dev, "Bug!  prepare_tx with size %d (> %d)\n",
+			   length, XMTU);
 		length = XMTU;
 	}
 	if (length >= MinTU) {
@@ -188,11 +135,12 @@ static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length,
 	} else if (length > MTU) {
 		hard->offset[0] = 0;
 		hard->offset[1] = ofs = 512 - length - 3;
-	} else
+	} else {
 		hard->offset[0] = ofs = 256 - length;
+	}
 
-	BUGMSG(D_DURING, "prepare_tx: length=%d ofs=%d\n",
-	       length,ofs);
+	arc_printk(D_DURING, dev, "prepare_tx: length=%d ofs=%d\n",
+		   length, ofs);
 
 	lp->hw.copy_to_card(dev, bufnum, 0, hard, ARC_HDR_SIZE);
 	lp->hw.copy_to_card(dev, bufnum, ofs, &pkt->soft, length);
@@ -201,3 +149,41 @@ static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length,
 
 	return 1;		/* done */
 }
+
+static struct ArcProto rawmode_proto = {
+	.suffix		= 'r',
+	.mtu		= XMTU,
+	.rx		= rx,
+	.build_header	= build_header,
+	.prepare_tx	= prepare_tx,
+	.continue_tx    = NULL,
+	.ack_tx         = NULL
+};
+
+static int __init arcnet_raw_init(void)
+{
+	int count;
+
+	pr_info("raw mode (`r') encapsulation support loaded\n");
+
+	for (count = 0; count < 256; count++)
+		if (arc_proto_map[count] == arc_proto_default)
+			arc_proto_map[count] = &rawmode_proto;
+
+	/* for raw mode, we only set the bcast proto if there's no better one */
+	if (arc_bcast_proto == arc_proto_default)
+		arc_bcast_proto = &rawmode_proto;
+
+	arc_proto_default = &rawmode_proto;
+	return 0;
+}
+
+static void __exit arcnet_raw_exit(void)
+{
+	arcnet_unregister_proto(&rawmode_proto);
+}
+
+module_init(arcnet_raw_init);
+module_exit(arcnet_raw_exit);
+
+MODULE_LICENSE("GPL");

drivers/net/arcnet/arc-rimi.c

@@ -1,6 +1,6 @@
 /*
  * Linux ARCnet driver - "RIM I" (entirely mem-mapped) cards
- * 
+ *
  * Written 1994-1999 by Avery Pennarun.
  * Written 1999-2000 by Martin Mares <mj@ucw.cz>.
  * Derived from skeleton.c by Donald Becker.
@@ -24,6 +24,9 @@
  *
  * **********************
  */
+
+#define pr_fmt(fmt) "arcnet:" KBUILD_MODNAME ": " fmt
+
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
@@ -33,12 +36,10 @@
 #include <linux/bootmem.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
-#include <asm/io.h>
-#include <linux/arcdevice.h>
-
-
-#define VERSION "arcnet: RIM I (entirely mem-mapped) support\n"
+#include <linux/io.h>
 
+#include "arcdevice.h"
+#include "com9026.h"
 
 /* Internal function declarations */
 
@@ -50,66 +51,46 @@ static void arcrimi_setmask(struct net_device *dev, int mask);
 static int arcrimi_reset(struct net_device *dev, int really_reset);
 static void arcrimi_copy_to_card(struct net_device *dev, int bufnum, int offset,
 				 void *buf, int count);
-static void arcrimi_copy_from_card(struct net_device *dev, int bufnum, int offset,
-				   void *buf, int count);
+static void arcrimi_copy_from_card(struct net_device *dev, int bufnum,
+				   int offset, void *buf, int count);
 
 /* Handy defines for ARCnet specific stuff */
 
 /* Amount of I/O memory used by the card */
-#define BUFFER_SIZE (512)
-#define MIRROR_SIZE (BUFFER_SIZE*4)
+#define BUFFER_SIZE	(512)
+#define MIRROR_SIZE	(BUFFER_SIZE * 4)
 
-/* COM 9026 controller chip --> ARCnet register addresses */
-#define _INTMASK (ioaddr+0)	/* writable */
-#define _STATUS  (ioaddr+0)	/* readable */
-#define _COMMAND (ioaddr+1)	/* writable, returns random vals on read (?) */
-#define _RESET  (ioaddr+8)	/* software reset (on read) */
-#define _MEMDATA  (ioaddr+12)	/* Data port for IO-mapped memory */
-#define _ADDR_HI  (ioaddr+15)	/* Control registers for said */
-#define _ADDR_LO  (ioaddr+14)
-#define _CONFIG  (ioaddr+2)	/* Configuration register */
-
-#undef ASTATUS
-#undef ACOMMAND
-#undef AINTMASK
-
-#define ASTATUS()	readb(_STATUS)
-#define ACOMMAND(cmd)	writeb((cmd),_COMMAND)
-#define AINTMASK(msk)	writeb((msk),_INTMASK)
-#define SETCONF()	writeb(lp->config,_CONFIG)
-
-
-/*
- * We cannot probe for a RIM I card; one reason is I don't know how to reset
+/* We cannot probe for a RIM I card; one reason is I don't know how to reset
  * them.  In fact, we can't even get their node ID automatically.  So, we
  * need to be passed a specific shmem address, IRQ, and node ID.
  */
 static int __init arcrimi_probe(struct net_device *dev)
 {
-	BUGLVL(D_NORMAL) printk(VERSION);
-	BUGLVL(D_NORMAL) printk("E-mail me if you actually test the RIM I driver, please!\n");
-
-	BUGLVL(D_NORMAL) printk("Given: node %02Xh, shmem %lXh, irq %d\n",
-	       dev->dev_addr[0], dev->mem_start, dev->irq);
+	if (BUGLVL(D_NORMAL)) {
+		pr_info("%s\n", "RIM I (entirely mem-mapped) support");
+		pr_info("E-mail me if you actually test the RIM I driver, please!\n");
+		pr_info("Given: node %02Xh, shmem %lXh, irq %d\n",
+			dev->dev_addr[0], dev->mem_start, dev->irq);
+	}
 
 	if (dev->mem_start <= 0 || dev->irq <= 0) {
-		BUGLVL(D_NORMAL) printk("No autoprobe for RIM I; you "
-		       "must specify the shmem and irq!\n");
+		if (BUGLVL(D_NORMAL))
+			pr_err("No autoprobe for RIM I; you must specify the shmem and irq!\n");
 		return -ENODEV;
 	}
 	if (dev->dev_addr[0] == 0) {
-		BUGLVL(D_NORMAL) printk("You need to specify your card's station "
-		       "ID!\n");
+		if (BUGLVL(D_NORMAL))
+			pr_err("You need to specify your card's station ID!\n");
 		return -ENODEV;
 	}
-	/*
-	 * Grab the memory region at mem_start for MIRROR_SIZE bytes.
+	/* Grab the memory region at mem_start for MIRROR_SIZE bytes.
 	 * Later in arcrimi_found() the real size will be determined
 	 * and this reserve will be released and the correct size
 	 * will be taken.
 	 */
 	if (!request_mem_region(dev->mem_start, MIRROR_SIZE, "arcnet (90xx)")) {
-		BUGLVL(D_NORMAL) printk("Card memory already allocated\n");
+		if (BUGLVL(D_NORMAL))
+			pr_notice("Card memory already allocated\n");
 		return -ENODEV;
 	}
 	return arcrimi_found(dev);
@@ -125,7 +106,7 @@ static int check_mirror(unsigned long addr, size_t size)
 
 	p = ioremap(addr, size);
 	if (p) {
-		if (readb(p) == TESTvalue)
+		if (arcnet_readb(p, COM9026_REG_R_STATUS) == TESTvalue)
 			res = 1;
 		else
 			res = 0;
@@ -136,9 +117,8 @@ static int check_mirror(unsigned long addr, size_t size)
 	return res;
 }
 
-/*
- * Set up the struct net_device associated with this card.  Called after
- * probing succeeds.
+/* Set up the struct net_device associated with this card.
+ * Called after probing succeeds.
  */
 static int __init arcrimi_found(struct net_device *dev)
 {
@@ -151,7 +131,7 @@ static int __init arcrimi_found(struct net_device *dev)
 	p = ioremap(dev->mem_start, MIRROR_SIZE);
 	if (!p) {
 		release_mem_region(dev->mem_start, MIRROR_SIZE);
-		BUGMSG(D_NORMAL, "Can't ioremap\n");
+		arc_printk(D_NORMAL, dev, "Can't ioremap\n");
 		return -ENODEV;
 	}
 
@@ -159,13 +139,14 @@ static int __init arcrimi_found(struct net_device *dev)
 	if (request_irq(dev->irq, arcnet_interrupt, 0, "arcnet (RIM I)", dev)) {
 		iounmap(p);
 		release_mem_region(dev->mem_start, MIRROR_SIZE);
-		BUGMSG(D_NORMAL, "Can't get IRQ %d!\n", dev->irq);
+		arc_printk(D_NORMAL, dev, "Can't get IRQ %d!\n", dev->irq);
 		return -ENODEV;
 	}
 
 	shmem = dev->mem_start;
-	writeb(TESTvalue, p);
-	writeb(dev->dev_addr[0], p + 1);	/* actually the node ID */
+	arcnet_writeb(TESTvalue, p, COM9026_REG_W_INTMASK);
+	arcnet_writeb(TESTvalue, p, COM9026_REG_W_COMMAND);
+					/* actually the station/node ID */
 
 	/* find the real shared memory start/end points, including mirrors */
 
@@ -174,7 +155,7 @@ static int __init arcrimi_found(struct net_device *dev)
 	 * 2k (or there are no mirrors at all) but on some, it's 4k.
 	 */
 	mirror_size = MIRROR_SIZE;
-	if (readb(p) == TESTvalue &&
+	if (arcnet_readb(p, COM9026_REG_R_STATUS) == TESTvalue &&
 	    check_mirror(shmem - MIRROR_SIZE, MIRROR_SIZE) == 0 &&
 	    check_mirror(shmem - 2 * MIRROR_SIZE, MIRROR_SIZE) == 1)
 		mirror_size = 2 * MIRROR_SIZE;
@@ -204,8 +185,7 @@ static int __init arcrimi_found(struct net_device *dev)
 	lp->hw.copy_to_card = arcrimi_copy_to_card;
 	lp->hw.copy_from_card = arcrimi_copy_from_card;
 
-	/*
-	 * re-reserve the memory region - arcrimi_probe() alloced this reqion
+	/* re-reserve the memory region - arcrimi_probe() alloced this reqion
 	 * but didn't know the real size.  Free that region and then re-get
 	 * with the correct size.  There is a VERY slim chance this could
 	 * fail.
@@ -215,24 +195,25 @@ static int __init arcrimi_found(struct net_device *dev)
 	if (!request_mem_region(dev->mem_start,
 				dev->mem_end - dev->mem_start + 1,
 				"arcnet (90xx)")) {
-		BUGMSG(D_NORMAL, "Card memory already allocated\n");
+		arc_printk(D_NORMAL, dev, "Card memory already allocated\n");
 		goto err_free_irq;
 	}
 
-	lp->mem_start = ioremap(dev->mem_start, dev->mem_end - dev->mem_start + 1);
+	lp->mem_start = ioremap(dev->mem_start,
+				dev->mem_end - dev->mem_start + 1);
 	if (!lp->mem_start) {
-		BUGMSG(D_NORMAL, "Can't remap device memory!\n");
+		arc_printk(D_NORMAL, dev, "Can't remap device memory!\n");
 		goto err_release_mem;
 	}
 
 	/* get and check the station ID from offset 1 in shmem */
-	dev->dev_addr[0] = readb(lp->mem_start + 1);
+	dev->dev_addr[0] = arcnet_readb(lp->mem_start, COM9026_REG_R_STATION);
 
-	BUGMSG(D_NORMAL, "ARCnet RIM I: station %02Xh found at IRQ %d, "
-	       "ShMem %lXh (%ld*%d bytes).\n",
-	       dev->dev_addr[0],
-	       dev->irq, dev->mem_start,
-	 (dev->mem_end - dev->mem_start + 1) / mirror_size, mirror_size);
+	arc_printk(D_NORMAL, dev, "ARCnet RIM I: station %02Xh found at IRQ %d, ShMem %lXh (%ld*%d bytes)\n",
+		   dev->dev_addr[0],
+		   dev->irq, dev->mem_start,
+		   (dev->mem_end - dev->mem_start + 1) / mirror_size,
+		   mirror_size);
 
 	err = register_netdev(dev);
 	if (err)
@@ -249,9 +230,7 @@ err_free_irq:
 	return -EIO;
 }
 
-
-/*
- * Do a hardware reset on the card, and set up necessary registers.
+/* Do a hardware reset on the card, and set up necessary registers.
  *
  * This should be called as little as possible, because it disrupts the
  * token on the network (causes a RECON) and requires a significant delay.
@@ -263,17 +242,19 @@ static int arcrimi_reset(struct net_device *dev, int really_reset)
 	struct arcnet_local *lp = netdev_priv(dev);
 	void __iomem *ioaddr = lp->mem_start + 0x800;
 
-	BUGMSG(D_INIT, "Resetting %s (status=%02Xh)\n", dev->name, ASTATUS());
+	arc_printk(D_INIT, dev, "Resetting %s (status=%02Xh)\n",
+		   dev->name, arcnet_readb(ioaddr, COM9026_REG_R_STATUS));
 
 	if (really_reset) {
-		writeb(TESTvalue, ioaddr - 0x800);	/* fake reset */
+		arcnet_writeb(TESTvalue, ioaddr, -0x800);	/* fake reset */
 		return 0;
 	}
-	ACOMMAND(CFLAGScmd | RESETclear);	/* clear flags & end reset */
-	ACOMMAND(CFLAGScmd | CONFIGclear);
+	/* clear flags & end reset */
+	arcnet_writeb(CFLAGScmd | RESETclear, ioaddr, COM9026_REG_W_COMMAND);
+	arcnet_writeb(CFLAGScmd | CONFIGclear, ioaddr, COM9026_REG_W_COMMAND);
 
 	/* enable extended (512-byte) packets */
-	ACOMMAND(CONFIGcmd | EXTconf);
+	arcnet_writeb(CONFIGcmd | EXTconf, ioaddr, COM9026_REG_W_COMMAND);
 
 	/* done!  return success. */
 	return 0;
@@ -284,7 +265,7 @@ static void arcrimi_setmask(struct net_device *dev, int mask)
 	struct arcnet_local *lp = netdev_priv(dev);
 	void __iomem *ioaddr = lp->mem_start + 0x800;
 
-	AINTMASK(mask);
+	arcnet_writeb(mask, ioaddr, COM9026_REG_W_INTMASK);
 }
 
 static int arcrimi_status(struct net_device *dev)
@@ -292,7 +273,7 @@ static int arcrimi_status(struct net_device *dev)
 	struct arcnet_local *lp = netdev_priv(dev);
 	void __iomem *ioaddr = lp->mem_start + 0x800;
 
-	return ASTATUS();
+	return arcnet_readb(ioaddr, COM9026_REG_R_STATUS);
 }
 
 static void arcrimi_command(struct net_device *dev, int cmd)
@@ -300,7 +281,7 @@ static void arcrimi_command(struct net_device *dev, int cmd)
 	struct arcnet_local *lp = netdev_priv(dev);
 	void __iomem *ioaddr = lp->mem_start + 0x800;
 
-	ACOMMAND(cmd);
+	arcnet_writeb(cmd, ioaddr, COM9026_REG_W_COMMAND);
 }
 
 static void arcrimi_copy_to_card(struct net_device *dev, int bufnum, int offset,
@@ -308,16 +289,17 @@ static void arcrimi_copy_to_card(struct net_device *dev, int bufnum, int offset,
 {
 	struct arcnet_local *lp = netdev_priv(dev);
 	void __iomem *memaddr = lp->mem_start + 0x800 + bufnum * 512 + offset;
-	TIME("memcpy_toio", count, memcpy_toio(memaddr, buf, count));
-}
 
+	TIME(dev, "memcpy_toio", count, memcpy_toio(memaddr, buf, count));
+}
 
-static void arcrimi_copy_from_card(struct net_device *dev, int bufnum, int offset,
-				   void *buf, int count)
+static void arcrimi_copy_from_card(struct net_device *dev, int bufnum,
+				   int offset, void *buf, int count)
 {
 	struct arcnet_local *lp = netdev_priv(dev);
 	void __iomem *memaddr = lp->mem_start + 0x800 + bufnum * 512 + offset;
-	TIME("memcpy_fromio", count, memcpy_fromio(buf, memaddr, count));
+
+	TIME(dev, "memcpy_fromio", count, memcpy_fromio(buf, memaddr, count));
 }
 
 static int node;
@@ -374,12 +356,13 @@ static void __exit arc_rimi_exit(void)
 static int __init arcrimi_setup(char *s)
 {
 	int ints[8];
+
 	s = get_options(s, 8, ints);
 	if (!ints[0])
 		return 1;
 	switch (ints[0]) {
 	default:		/* ERROR */
-		printk("arcrimi: Too many arguments.\n");
+		pr_err("Too many arguments\n");
 	case 3:		/* Node ID */
 		node = ints[3];
 	case 2:		/* IRQ */

include/linux/arcdevice.h → drivers/net/arcnet/arcdevice.h

@@ -34,7 +34,6 @@
  */
 #define RECON_THRESHOLD 30
 
-
 /*
  * Define this to the minimum "timeout" value.  If a transmit takes longer
  * than TX_TIMEOUT jiffies, Linux will abort the TX and retry.  On a large
@@ -44,14 +43,12 @@
  */
 #define TX_TIMEOUT (HZ * 200 / 1000)
 
-
 /* Display warnings about the driver being an ALPHA version. */
 #undef ALPHA_WARNING
 
-
 /*
  * Debugging bitflags: each option can be enabled individually.
- * 
+ *
  * Note: only debug flags included in the ARCNET_DEBUG_MAX define will
  *   actually be available.  GCC will (at least, GCC 2.7.0 will) notice
  *   lines using a BUGLVL not in ARCNET_DEBUG_MAX and automatically optimize
@@ -77,35 +74,47 @@
 #endif
 
 #ifndef ARCNET_DEBUG
-#define ARCNET_DEBUG (D_NORMAL|D_EXTRA)
+#define ARCNET_DEBUG (D_NORMAL | D_EXTRA)
 #endif
 extern int arcnet_debug;
 
+#define BUGLVL(x)	((x) & ARCNET_DEBUG_MAX & arcnet_debug)
+
 /* macros to simplify debug checking */
-#define BUGLVL(x) if ((ARCNET_DEBUG_MAX)&arcnet_debug&(x))
-#define BUGMSG2(x,msg,args...) do { BUGLVL(x) printk(msg, ## args); } while (0)
-#define BUGMSG(x,msg,args...) \
-	BUGMSG2(x, "%s%6s: " msg, \
-            x==D_NORMAL	? KERN_WARNING \
-            		: x < D_DURING ? KERN_INFO : KERN_DEBUG, \
-	    dev->name , ## args)
+#define arc_printk(x, dev, fmt, ...)					\
+do {									\
+	if (BUGLVL(x)) {						\
+		if ((x) == D_NORMAL)					\
+			netdev_warn(dev, fmt, ##__VA_ARGS__);		\
+		else if ((x) < D_DURING)				\
+			netdev_info(dev, fmt, ##__VA_ARGS__);		\
+		else							\
+			netdev_dbg(dev, fmt, ##__VA_ARGS__);		\
+	}								\
+} while (0)
+
+#define arc_cont(x, fmt, ...)						\
+do {									\
+	if (BUGLVL(x))							\
+		pr_cont(fmt, ##__VA_ARGS__);				\
+} while (0)
 
 /* see how long a function call takes to run, expressed in CPU cycles */
-#define TIME(name, bytes, call) BUGLVL(D_TIMING) { \
-	    unsigned long _x, _y; \
-	    _x = get_cycles(); \
-	    call; \
-	    _y = get_cycles(); \
-	    BUGMSG(D_TIMING, \
-	       "%s: %d bytes in %lu cycles == " \
-	       "%lu Kbytes/100Mcycle\n",\
-		   name, bytes, _y - _x, \
-		   100000000 / 1024 * bytes / (_y - _x + 1));\
-	} \
-	else { \
-		    call;\
-	}
-
+#define TIME(dev, name, bytes, call)					\
+do {									\
+	if (BUGLVL(D_TIMING)) {						\
+		unsigned long _x, _y;					\
+		_x = get_cycles();					\
+		call;							\
+		_y = get_cycles();					\
+		arc_printk(D_TIMING, dev,				\
+			   "%s: %d bytes in %lu cycles == %lu Kbytes/100Mcycle\n", \
+			   name, bytes, _y - _x,			\
+			   100000000 / 1024 * bytes / (_y - _x + 1));	\
+	} else {							\
+		call;							\
+	}								\
+} while (0)
 
 /*
  * Time needed to reset the card - in ms (milliseconds).  This works on my
@@ -155,6 +164,7 @@ extern int arcnet_debug;
 #define CONFIGcmd       0x05	/* define configuration */
 #define CFLAGScmd       0x06	/* clear flags */
 #define TESTcmd         0x07	/* load test flags */
+#define STARTIOcmd      0x18	/* start internal operation */
 
 /* flags for "clear flags" command */
 #define RESETclear      0x08	/* power-on-reset */
@@ -182,29 +192,27 @@ extern int arcnet_debug;
 #define ARC_CAN_10MBIT  2   /* card uses COM20022, supporting 10MBit,
 				 but default is 2.5MBit. */
 
-
 /* information needed to define an encapsulation driver */
 struct ArcProto {
 	char suffix;		/* a for RFC1201, e for ether-encap, etc. */
 	int mtu;		/* largest possible packet */
 	int is_ip;              /* This is a ip plugin - not a raw thing */
 
-	void (*rx) (struct net_device * dev, int bufnum,
-		    struct archdr * pkthdr, int length);
-	int (*build_header) (struct sk_buff * skb, struct net_device *dev,
-			     unsigned short ethproto, uint8_t daddr);
+	void (*rx)(struct net_device *dev, int bufnum,
+		   struct archdr *pkthdr, int length);
+	int (*build_header)(struct sk_buff *skb, struct net_device *dev,
+			    unsigned short ethproto, uint8_t daddr);
 
 	/* these functions return '1' if the skb can now be freed */
-	int (*prepare_tx) (struct net_device * dev, struct archdr * pkt, int length,
-			   int bufnum);
-	int (*continue_tx) (struct net_device * dev, int bufnum);
-	int (*ack_tx) (struct net_device * dev, int acked);
+	int (*prepare_tx)(struct net_device *dev, struct archdr *pkt,
+			  int length, int bufnum);
+	int (*continue_tx)(struct net_device *dev, int bufnum);
+	int (*ack_tx)(struct net_device *dev, int acked);
 };
 
 extern struct ArcProto *arc_proto_map[256], *arc_proto_default,
 	*arc_bcast_proto, *arc_raw_proto;
 
-
 /*
  * "Incoming" is information needed for each address that could be sending
  * to us.  Mostly for partially-received split packets.
@@ -216,7 +224,6 @@ struct Incoming {
 		numpackets;	/* number of packets in split     */
 };
 
-
 /* only needed for RFC1201 */
 struct Outgoing {
 	struct ArcProto *proto;	/* protocol driver that owns this:
@@ -230,7 +237,6 @@ struct Outgoing {
 		numsegs;	/* number of segments */
 };
 
-
 struct arcnet_local {
 	uint8_t config,		/* current value of CONFIG register */
 		timeout,	/* Extended timeout for COM20020 */
@@ -251,7 +257,6 @@ struct arcnet_local {
 	char *card_name;	/* card ident string */
 	int card_flags;		/* special card features */
 
-
 	/* On preemtive and SMB a lock is needed */
 	spinlock_t lock;
 
@@ -263,13 +268,13 @@ struct arcnet_local {
 	 * situations in which we (for example) want to pre-load a transmit
 	 * buffer, or start receiving while we copy a received packet to
 	 * memory.
-	 * 
+	 *
 	 * The rules: only the interrupt handler is allowed to _add_ buffers to
 	 * the queue; thus, this doesn't require a lock.  Both the interrupt
 	 * handler and the transmit function will want to _remove_ buffers, so
 	 * we need to handle the situation where they try to do it at the same
 	 * time.
-	 * 
+	 *
 	 * If next_buf == first_free_buf, the queue is empty.  Since there are
 	 * only four possible buffers, the queue should never be full.
 	 */
@@ -298,34 +303,29 @@ struct arcnet_local {
 	/* hardware-specific functions */
 	struct {
 		struct module *owner;
-		void (*command) (struct net_device * dev, int cmd);
-		int (*status) (struct net_device * dev);
-		void (*intmask) (struct net_device * dev, int mask);
-		int (*reset) (struct net_device * dev, int really_reset);
-		void (*open) (struct net_device * dev);
-		void (*close) (struct net_device * dev);
-
-		void (*copy_to_card) (struct net_device * dev, int bufnum, int offset,
-				      void *buf, int count);
-		void (*copy_from_card) (struct net_device * dev, int bufnum, int offset,
-					void *buf, int count);
+		void (*command)(struct net_device *dev, int cmd);
+		int (*status)(struct net_device *dev);
+		void (*intmask)(struct net_device *dev, int mask);
+		int (*reset)(struct net_device *dev, int really_reset);
+		void (*open)(struct net_device *dev);
+		void (*close)(struct net_device *dev);
+
+		void (*copy_to_card)(struct net_device *dev, int bufnum,
+				     int offset, void *buf, int count);
+		void (*copy_from_card)(struct net_device *dev, int bufnum,
+				       int offset, void *buf, int count);
 	} hw;
 
 	void __iomem *mem_start;	/* pointer to ioremap'ed MMIO */
 };
 
-
-#define ARCRESET(x)  (lp->hw.reset(dev, (x)))
-#define ACOMMAND(x)  (lp->hw.command(dev, (x)))
-#define ASTATUS()    (lp->hw.status(dev))
-#define AINTMASK(x)  (lp->hw.intmask(dev, (x)))
-
-
-
 #if ARCNET_DEBUG_MAX & D_SKB
 void arcnet_dump_skb(struct net_device *dev, struct sk_buff *skb, char *desc);
 #else
-#define arcnet_dump_skb(dev,skb,desc) ;
+static inline
+void arcnet_dump_skb(struct net_device *dev, struct sk_buff *skb, char *desc)
+{
+}
 #endif
 
 void arcnet_unregister_proto(struct ArcProto *proto);
@@ -335,8 +335,34 @@ struct net_device *alloc_arcdev(const char *name);
 int arcnet_open(struct net_device *dev);
 int arcnet_close(struct net_device *dev);
 netdev_tx_t arcnet_send_packet(struct sk_buff *skb,
-				     struct net_device *dev);
+			       struct net_device *dev);
 void arcnet_timeout(struct net_device *dev);
 
+/* I/O equivalents */
+
+#ifdef CONFIG_SA1100_CT6001
+#define BUS_ALIGN  2  /* 8 bit device on a 16 bit bus - needs padding */
+#else
+#define BUS_ALIGN  1
+#endif
+
+/* addr and offset allow register like names to define the actual IO  address.
+ * A configuration option multiplies the offset for alignment.
+ */
+#define arcnet_inb(addr, offset)					\
+	inb((addr) + BUS_ALIGN * (offset))
+#define arcnet_outb(value, addr, offset)				\
+	outb(value, (addr) + BUS_ALIGN * (offset))
+
+#define arcnet_insb(addr, offset, buffer, count)			\
+	insb((addr) + BUS_ALIGN * (offset), buffer, count)
+#define arcnet_outsb(addr, offset, buffer, count)			\
+	outsb((addr) + BUS_ALIGN * (offset), buffer, count)
+
+#define arcnet_readb(addr, offset)					\
+	readb((addr) + (offset))
+#define arcnet_writeb(value, addr, offset)				\
+	writeb(value, (addr) + (offset))
+
 #endif				/* __KERNEL__ */
 #endif				/* _LINUX_ARCDEVICE_H */

drivers/net/arcnet/arcnet.c

@@ -1,6 +1,6 @@
 /*
  * Linux ARCnet driver - device-independent routines
- * 
+ *
  * Written 1997 by David Woodhouse.
  * Written 1994-1999 by Avery Pennarun.
  * Written 1999-2000 by Martin Mares <mj@ucw.cz>.
@@ -20,12 +20,12 @@
  * modified by SRC, incorporated herein by reference.
  *
  * **********************
- * 
+ *
  * The change log is now in a file called ChangeLog in this directory.
  *
  * Sources:
  *  - Crynwr arcnet.com/arcether.com packet drivers.
- *  - arcnet.c v0.00 dated 1/1/94 and apparently by 
+ *  - arcnet.c v0.00 dated 1/1/94 and apparently by
  *     Donald Becker - it didn't work :)
  *  - skeleton.c v0.05 dated 11/16/93 by Donald Becker
  *     (from Linux Kernel 1.1.45)
@@ -41,7 +41,7 @@
  *     <jojo@repas.de>
  */
 
-#define VERSION "arcnet: v3.94 BETA 2007/02/08 - by Avery Pennarun et al.\n"
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
 #include <linux/module.h>
 #include <linux/types.h>
@@ -50,9 +50,11 @@
 #include <linux/if_arp.h>
 #include <net/arp.h>
 #include <linux/init.h>
-#include <linux/arcdevice.h>
 #include <linux/jiffies.h>
 
+#include "arcdevice.h"
+#include "com9026.h"
+
 /* "do nothing" functions for protocol drivers */
 static void null_rx(struct net_device *dev, int bufnum,
 		    struct archdr *pkthdr, int length);
@@ -63,17 +65,24 @@ static int null_prepare_tx(struct net_device *dev, struct archdr *pkt,
 
 static void arcnet_rx(struct net_device *dev, int bufnum);
 
-/*
- * one ArcProto per possible proto ID.  None of the elements of
+/* one ArcProto per possible proto ID.  None of the elements of
  * arc_proto_map are allowed to be NULL; they will get set to
  * arc_proto_default instead.  It also must not be NULL; if you would like
  * to set it to NULL, set it to &arc_proto_null instead.
  */
- struct ArcProto *arc_proto_map[256], *arc_proto_default,
-   *arc_bcast_proto, *arc_raw_proto;
+struct ArcProto *arc_proto_map[256];
+EXPORT_SYMBOL(arc_proto_map);
 
-static struct ArcProto arc_proto_null =
-{
+struct ArcProto *arc_proto_default;
+EXPORT_SYMBOL(arc_proto_default);
+
+struct ArcProto *arc_bcast_proto;
+EXPORT_SYMBOL(arc_bcast_proto);
+
+struct ArcProto *arc_raw_proto;
+EXPORT_SYMBOL(arc_raw_proto);
+
+static struct ArcProto arc_proto_null = {
 	.suffix		= '?',
 	.mtu		= XMTU,
 	.is_ip          = 0,
@@ -86,19 +95,7 @@ static struct ArcProto arc_proto_null =
 
 /* Exported function prototypes */
 int arcnet_debug = ARCNET_DEBUG;
-
-EXPORT_SYMBOL(arc_proto_map);
-EXPORT_SYMBOL(arc_proto_default);
-EXPORT_SYMBOL(arc_bcast_proto);
-EXPORT_SYMBOL(arc_raw_proto);
-EXPORT_SYMBOL(arcnet_unregister_proto);
 EXPORT_SYMBOL(arcnet_debug);
-EXPORT_SYMBOL(alloc_arcdev);
-EXPORT_SYMBOL(arcnet_interrupt);
-EXPORT_SYMBOL(arcnet_open);
-EXPORT_SYMBOL(arcnet_close);
-EXPORT_SYMBOL(arcnet_send_packet);
-EXPORT_SYMBOL(arcnet_timeout);
 
 /* Internal function prototypes */
 static int arcnet_header(struct sk_buff *skb, struct net_device *dev,
@@ -116,29 +113,20 @@ static int __init arcnet_init(void)
 
 	arcnet_debug = debug;
 
-	printk("arcnet loaded.\n");
-
-#ifdef ALPHA_WARNING
-	BUGLVL(D_EXTRA) {
-		printk("arcnet: ***\n"
-		"arcnet: * Read arcnet.txt for important release notes!\n"
-		       "arcnet: *\n"
-		       "arcnet: * This is an ALPHA version! (Last stable release: v3.02)  E-mail\n"
-		       "arcnet: * me if you have any questions, comments, or bug reports.\n"
-		       "arcnet: ***\n");
-	}
-#endif
+	pr_info("arcnet loaded\n");
 
 	/* initialize the protocol map */
 	arc_raw_proto = arc_proto_default = arc_bcast_proto = &arc_proto_null;
 	for (count = 0; count < 256; count++)
 		arc_proto_map[count] = arc_proto_default;
 
-	BUGLVL(D_DURING)
-	    printk("arcnet: struct sizes: %Zd %Zd %Zd %Zd %Zd\n",
-		 sizeof(struct arc_hardware), sizeof(struct arc_rfc1201),
-		sizeof(struct arc_rfc1051), sizeof(struct arc_eth_encap),
-		   sizeof(struct archdr));
+	if (BUGLVL(D_DURING))
+		pr_info("struct sizes: %Zd %Zd %Zd %Zd %Zd\n",
+			sizeof(struct arc_hardware),
+			sizeof(struct arc_rfc1201),
+			sizeof(struct arc_rfc1051),
+			sizeof(struct arc_eth_encap),
+			sizeof(struct archdr));
 
 	return 0;
 }
@@ -150,9 +138,7 @@ static void __exit arcnet_exit(void)
 module_init(arcnet_init);
 module_exit(arcnet_exit);
 
-/*
- * Dump the contents of an sk_buff
- */
+/* Dump the contents of an sk_buff */
 #if ARCNET_DEBUG_MAX & D_SKB
 void arcnet_dump_skb(struct net_device *dev,
 		     struct sk_buff *skb, char *desc)
@@ -164,14 +150,10 @@ void arcnet_dump_skb(struct net_device *dev,
 	print_hex_dump(KERN_DEBUG, hdr, DUMP_PREFIX_OFFSET,
 		       16, 1, skb->data, skb->len, true);
 }
-
 EXPORT_SYMBOL(arcnet_dump_skb);
 #endif
 
-
-/*
- * Dump the contents of an ARCnet buffer
- */
+/* Dump the contents of an ARCnet buffer */
 #if (ARCNET_DEBUG_MAX & (D_RX | D_TX))
 static void arcnet_dump_packet(struct net_device *dev, int bufnum,
 			       char *desc, int take_arcnet_lock)
@@ -183,12 +165,13 @@ static void arcnet_dump_packet(struct net_device *dev, int bufnum,
 	char hdr[32];
 
 	/* hw.copy_from_card expects IRQ context so take the IRQ lock
-	   to keep it single threaded */
-	if(take_arcnet_lock)
+	 * to keep it single threaded
+	 */
+	if (take_arcnet_lock)
 		spin_lock_irqsave(&lp->lock, flags);
 
 	lp->hw.copy_from_card(dev, bufnum, 0, buf, 512);
-	if(take_arcnet_lock)
+	if (take_arcnet_lock)
 		spin_unlock_irqrestore(&lp->lock, flags);
 
 	/* if the offset[0] byte is nonzero, this is a 256-byte packet */
@@ -202,13 +185,11 @@ static void arcnet_dump_packet(struct net_device *dev, int bufnum,
 
 #else
 
-#define arcnet_dump_packet(dev, bufnum, desc,take_arcnet_lock) do { } while (0)
+#define arcnet_dump_packet(dev, bufnum, desc, take_arcnet_lock) do { } while (0)
 
 #endif
 
-
-/*
- * Unregister a protocol driver from the arc_proto_map.  Protocol drivers
+/* Unregister a protocol driver from the arc_proto_map.  Protocol drivers
  * are responsible for registering themselves, but the unregister routine
  * is pretty generic so we'll do it here.
  */
@@ -228,12 +209,11 @@ void arcnet_unregister_proto(struct ArcProto *proto)
 			arc_proto_map[count] = arc_proto_default;
 	}
 }
+EXPORT_SYMBOL(arcnet_unregister_proto);
 
-
-/*
- * Add a buffer to the queue.  Only the interrupt handler is allowed to do
+/* Add a buffer to the queue.  Only the interrupt handler is allowed to do
  * this, unless interrupts are disabled.
- * 
+ *
  * Note: we don't check for a full queue, since there aren't enough buffers
  * to more than fill it.
  */
@@ -245,19 +225,17 @@ static void release_arcbuf(struct net_device *dev, int bufnum)
 	lp->buf_queue[lp->first_free_buf++] = bufnum;
 	lp->first_free_buf %= 5;
 
-	BUGLVL(D_DURING) {
-		BUGMSG(D_DURING, "release_arcbuf: freed #%d; buffer queue is now: ",
-		       bufnum);
-		for (i = lp->next_buf; i != lp->first_free_buf; i = (i+1) % 5)
-			BUGMSG2(D_DURING, "#%d ", lp->buf_queue[i]);
-		BUGMSG2(D_DURING, "\n");
+	if (BUGLVL(D_DURING)) {
+		arc_printk(D_DURING, dev, "release_arcbuf: freed #%d; buffer queue is now: ",
+			   bufnum);
+		for (i = lp->next_buf; i != lp->first_free_buf; i = (i + 1) % 5)
+			arc_cont(D_DURING, "#%d ", lp->buf_queue[i]);
+		arc_cont(D_DURING, "\n");
 	}
 }
 
-
-/*
- * Get a buffer from the queue.  If this returns -1, there are no buffers
- * available.
+/* Get a buffer from the queue.
+ * If this returns -1, there are no buffers available.
  */
 static int get_arcbuf(struct net_device *dev)
 {
@@ -266,34 +244,32 @@ static int get_arcbuf(struct net_device *dev)
 
 	if (!atomic_dec_and_test(&lp->buf_lock)) {
 		/* already in this function */
-		BUGMSG(D_NORMAL, "get_arcbuf: overlap (%d)!\n",
-		       lp->buf_lock.counter);
-	}
-	else {			/* we can continue */
+		arc_printk(D_NORMAL, dev, "get_arcbuf: overlap (%d)!\n",
+			   lp->buf_lock.counter);
+	} else {			/* we can continue */
 		if (lp->next_buf >= 5)
 			lp->next_buf -= 5;
 
-		if (lp->next_buf == lp->first_free_buf)
-			BUGMSG(D_NORMAL, "get_arcbuf: BUG: no buffers are available??\n");
-		else {
+		if (lp->next_buf == lp->first_free_buf) {
+			arc_printk(D_NORMAL, dev, "get_arcbuf: BUG: no buffers are available??\n");
+		} else {
 			buf = lp->buf_queue[lp->next_buf++];
 			lp->next_buf %= 5;
 		}
 	}
 
-
-	BUGLVL(D_DURING) {
-		BUGMSG(D_DURING, "get_arcbuf: got #%d; buffer queue is now: ", buf);
-		for (i = lp->next_buf; i != lp->first_free_buf; i = (i+1) % 5)
-			BUGMSG2(D_DURING, "#%d ", lp->buf_queue[i]);
-		BUGMSG2(D_DURING, "\n");
+	if (BUGLVL(D_DURING)) {
+		arc_printk(D_DURING, dev, "get_arcbuf: got #%d; buffer queue is now: ",
+			   buf);
+		for (i = lp->next_buf; i != lp->first_free_buf; i = (i + 1) % 5)
+			arc_cont(D_DURING, "#%d ", lp->buf_queue[i]);
+		arc_cont(D_DURING, "\n");
 	}
 
 	atomic_inc(&lp->buf_lock);
 	return buf;
 }
 
-
 static int choose_mtu(void)
 {
 	int count, mtu = 65535;
@@ -336,7 +312,6 @@ static void arcdev_setup(struct net_device *dev)
 
 	/* New-style flags. */
 	dev->flags = IFF_BROADCAST;
-
 }
 
 struct net_device *alloc_arcdev(const char *name)
@@ -346,16 +321,17 @@ struct net_device *alloc_arcdev(const char *name)
 	dev = alloc_netdev(sizeof(struct arcnet_local),
 			   name && *name ? name : "arc%d", NET_NAME_UNKNOWN,
 			   arcdev_setup);
-	if(dev) {
+	if (dev) {
 		struct arcnet_local *lp = netdev_priv(dev);
+
 		spin_lock_init(&lp->lock);
 	}
 
 	return dev;
 }
+EXPORT_SYMBOL(alloc_arcdev);
 
-/*
- * Open/initialize the board.  This is called sometime after booting when
+/* Open/initialize the board.  This is called sometime after booting when
  * the 'ifconfig' program is run.
  *
  * This routine should set everything up anew at each open, even registers
@@ -367,34 +343,33 @@ int arcnet_open(struct net_device *dev)
 	struct arcnet_local *lp = netdev_priv(dev);
 	int count, newmtu, error;
 
-	BUGMSG(D_INIT,"opened.");
+	arc_printk(D_INIT, dev, "opened.");
 
 	if (!try_module_get(lp->hw.owner))
 		return -ENODEV;
 
-	BUGLVL(D_PROTO) {
-		BUGMSG(D_PROTO, "protocol map (default is '%c'): ",
-		       arc_proto_default->suffix);
+	if (BUGLVL(D_PROTO)) {
+		arc_printk(D_PROTO, dev, "protocol map (default is '%c'): ",
+			   arc_proto_default->suffix);
 		for (count = 0; count < 256; count++)
-			BUGMSG2(D_PROTO, "%c", arc_proto_map[count]->suffix);
-		BUGMSG2(D_PROTO, "\n");
+			arc_cont(D_PROTO, "%c", arc_proto_map[count]->suffix);
+		arc_cont(D_PROTO, "\n");
 	}
 
-
-	BUGMSG(D_INIT, "arcnet_open: resetting card.\n");
+	arc_printk(D_INIT, dev, "arcnet_open: resetting card.\n");
 
 	/* try to put the card in a defined state - if it fails the first
 	 * time, actually reset it.
 	 */
 	error = -ENODEV;
-	if (ARCRESET(0) && ARCRESET(1))
+	if (lp->hw.reset(dev, 0) && lp->hw.reset(dev, 1))
 		goto out_module_put;
 
 	newmtu = choose_mtu();
 	if (newmtu < dev->mtu)
 		dev->mtu = newmtu;
 
-	BUGMSG(D_INIT, "arcnet_open: mtu: %d.\n", dev->mtu);
+	arc_printk(D_INIT, dev, "arcnet_open: mtu: %d.\n", dev->mtu);
 
 	/* autodetect the encapsulation for each host. */
 	memset(lp->default_proto, 0, sizeof(lp->default_proto));
@@ -425,30 +400,28 @@ int arcnet_open(struct net_device *dev)
 		lp->hw.open(dev);
 
 	if (dev->dev_addr[0] == 0)
-		BUGMSG(D_NORMAL, "WARNING!  Station address 00 is reserved "
-		       "for broadcasts!\n");
+		arc_printk(D_NORMAL, dev, "WARNING!  Station address 00 is reserved for broadcasts!\n");
 	else if (dev->dev_addr[0] == 255)
-		BUGMSG(D_NORMAL, "WARNING!  Station address FF may confuse "
-		       "DOS networking programs!\n");
+		arc_printk(D_NORMAL, dev, "WARNING!  Station address FF may confuse DOS networking programs!\n");
 
-	BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
-	if (ASTATUS() & RESETflag) {
-	  	BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
-		ACOMMAND(CFLAGScmd | RESETclear);
+	arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__);
+	if (lp->hw.status(dev) & RESETflag) {
+		arc_printk(D_DEBUG, dev, "%s: %d: %s\n",
+			   __FILE__, __LINE__, __func__);
+		lp->hw.command(dev, CFLAGScmd | RESETclear);
 	}
 
-
-	BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
+	arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__);
 	/* make sure we're ready to receive IRQ's. */
-	AINTMASK(0);
+	lp->hw.intmask(dev, 0);
 	udelay(1);		/* give it time to set the mask before
 				 * we reset it again. (may not even be
 				 * necessary)
 				 */
-	BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
+	arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__);
 	lp->intmask = NORXflag | RECONflag;
-	AINTMASK(lp->intmask);
-	BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
+	lp->hw.intmask(dev, lp->intmask);
+	arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__);
 
 	netif_start_queue(dev);
 
@@ -458,7 +431,7 @@ int arcnet_open(struct net_device *dev)
 	module_put(lp->hw.owner);
 	return error;
 }
-
+EXPORT_SYMBOL(arcnet_open);
 
 /* The inverse routine to arcnet_open - shuts down the card. */
 int arcnet_close(struct net_device *dev)
@@ -468,9 +441,9 @@ int arcnet_close(struct net_device *dev)
 	netif_stop_queue(dev);
 
 	/* flush TX and disable RX */
-	AINTMASK(0);
-	ACOMMAND(NOTXcmd);	/* stop transmit */
-	ACOMMAND(NORXcmd);	/* disable receive */
+	lp->hw.intmask(dev, 0);
+	lp->hw.command(dev, NOTXcmd);	/* stop transmit */
+	lp->hw.command(dev, NORXcmd);	/* disable receive */
 	mdelay(1);
 
 	/* shut down the card */
@@ -478,7 +451,7 @@ int arcnet_close(struct net_device *dev)
 	module_put(lp->hw.owner);
 	return 0;
 }
-
+EXPORT_SYMBOL(arcnet_close);
 
 static int arcnet_header(struct sk_buff *skb, struct net_device *dev,
 			 unsigned short type, const void *daddr,
@@ -488,48 +461,44 @@ static int arcnet_header(struct sk_buff *skb, struct net_device *dev,
 	uint8_t _daddr, proto_num;
 	struct ArcProto *proto;
 
-	BUGMSG(D_DURING,
-	    "create header from %d to %d; protocol %d (%Xh); size %u.\n",
-	       saddr ? *(uint8_t *) saddr : -1,
-	       daddr ? *(uint8_t *) daddr : -1,
-	       type, type, len);
-
-	if (skb->len!=0 && len != skb->len)
-		BUGMSG(D_NORMAL, "arcnet_header: Yikes!  skb->len(%d) != len(%d)!\n",
-		       skb->len, len);
-
-
-  	/* Type is host order - ? */
-  	if(type == ETH_P_ARCNET) {
-  		proto = arc_raw_proto;
-  		BUGMSG(D_DEBUG, "arc_raw_proto used. proto='%c'\n",proto->suffix);
-  		_daddr = daddr ? *(uint8_t *) daddr : 0;
-  	}
-	else if (!daddr) {
-		/*
-		 * if the dest addr isn't provided, we can't choose an encapsulation!
-		 * Store the packet type (eg. ETH_P_IP) for now, and we'll push on a
-		 * real header when we do rebuild_header.
-		 */
-		*(uint16_t *) skb_push(skb, 2) = type;
-		/*
-		 * XXX: Why not use skb->mac_len?
+	arc_printk(D_DURING, dev,
+		   "create header from %d to %d; protocol %d (%Xh); size %u.\n",
+		   saddr ? *(uint8_t *)saddr : -1,
+		   daddr ? *(uint8_t *)daddr : -1,
+		   type, type, len);
+
+	if (skb->len != 0 && len != skb->len)
+		arc_printk(D_NORMAL, dev, "arcnet_header: Yikes!  skb->len(%d) != len(%d)!\n",
+			   skb->len, len);
+
+	/* Type is host order - ? */
+	if (type == ETH_P_ARCNET) {
+		proto = arc_raw_proto;
+		arc_printk(D_DEBUG, dev, "arc_raw_proto used. proto='%c'\n",
+			   proto->suffix);
+		_daddr = daddr ? *(uint8_t *)daddr : 0;
+	} else if (!daddr) {
+		/* if the dest addr isn't provided, we can't choose an
+		 * encapsulation!  Store the packet type (eg. ETH_P_IP)
+		 * for now, and we'll push on a real header when we do
+		 * rebuild_header.
 		 */
+		*(uint16_t *)skb_push(skb, 2) = type;
+		/* XXX: Why not use skb->mac_len? */
 		if (skb->network_header - skb->mac_header != 2)
-			BUGMSG(D_NORMAL, "arcnet_header: Yikes!  diff (%d) is not 2!\n",
-			       (int)(skb->network_header - skb->mac_header));
+			arc_printk(D_NORMAL, dev, "arcnet_header: Yikes!  diff (%u) is not 2!\n",
+				   skb->network_header - skb->mac_header);
 		return -2;	/* return error -- can't transmit yet! */
-	}
-	else {
+	} else {
 		/* otherwise, we can just add the header as usual. */
-		_daddr = *(uint8_t *) daddr;
+		_daddr = *(uint8_t *)daddr;
 		proto_num = lp->default_proto[_daddr];
 		proto = arc_proto_map[proto_num];
-		BUGMSG(D_DURING, "building header for %02Xh using protocol '%c'\n",
-		       proto_num, proto->suffix);
+		arc_printk(D_DURING, dev, "building header for %02Xh using protocol '%c'\n",
+			   proto_num, proto->suffix);
 		if (proto == &arc_proto_null && arc_bcast_proto != proto) {
-			BUGMSG(D_DURING, "actually, let's use '%c' instead.\n",
-			       arc_bcast_proto->suffix);
+			arc_printk(D_DURING, dev, "actually, let's use '%c' instead.\n",
+				   arc_bcast_proto->suffix);
 			proto = arc_bcast_proto;
 		}
 	}
@@ -538,7 +507,7 @@ static int arcnet_header(struct sk_buff *skb, struct net_device *dev,
 
 /* Called by the kernel in order to transmit a packet. */
 netdev_tx_t arcnet_send_packet(struct sk_buff *skb,
-				     struct net_device *dev)
+			       struct net_device *dev)
 {
 	struct arcnet_local *lp = netdev_priv(dev);
 	struct archdr *pkt;
@@ -548,21 +517,22 @@ netdev_tx_t arcnet_send_packet(struct sk_buff *skb,
 	unsigned long flags;
 	int freeskb, retval;
 
-	BUGMSG(D_DURING,
-	       "transmit requested (status=%Xh, txbufs=%d/%d, len=%d, protocol %x)\n",
-	       ASTATUS(), lp->cur_tx, lp->next_tx, skb->len,skb->protocol);
+	arc_printk(D_DURING, dev,
+		   "transmit requested (status=%Xh, txbufs=%d/%d, len=%d, protocol %x)\n",
+		   lp->hw.status(dev), lp->cur_tx, lp->next_tx, skb->len, skb->protocol);
 
-	pkt = (struct archdr *) skb->data;
+	pkt = (struct archdr *)skb->data;
 	soft = &pkt->soft.rfc1201;
 	proto = arc_proto_map[soft->proto];
 
-	BUGMSG(D_SKB_SIZE, "skb: transmitting %d bytes to %02X\n",
-		skb->len, pkt->hard.dest);
-	BUGLVL(D_SKB) arcnet_dump_skb(dev, skb, "tx");
+	arc_printk(D_SKB_SIZE, dev, "skb: transmitting %d bytes to %02X\n",
+		   skb->len, pkt->hard.dest);
+	if (BUGLVL(D_SKB))
+		arcnet_dump_skb(dev, skb, "tx");
 
 	/* fits in one packet? */
 	if (skb->len - ARC_HDR_SIZE > XMTU && !proto->continue_tx) {
-		BUGMSG(D_NORMAL, "fixme: packet too large: compensating badly!\n");
+		arc_printk(D_NORMAL, dev, "fixme: packet too large: compensating badly!\n");
 		dev_kfree_skb(skb);
 		return NETDEV_TX_OK;	/* don't try again */
 	}
@@ -571,17 +541,18 @@ netdev_tx_t arcnet_send_packet(struct sk_buff *skb,
 	netif_stop_queue(dev);
 
 	spin_lock_irqsave(&lp->lock, flags);
-	AINTMASK(0);
-	if(lp->next_tx == -1)
+	lp->hw.intmask(dev, 0);
+	if (lp->next_tx == -1)
 		txbuf = get_arcbuf(dev);
-	else {
+	else
 		txbuf = -1;
-	}
+
 	if (txbuf != -1) {
 		if (proto->prepare_tx(dev, pkt, skb->len, txbuf) &&
 		    !proto->ack_tx) {
 			/* done right away and we don't want to acknowledge
-			   the package later - forget about it now */
+			 *  the package later - forget about it now
+			 */
 			dev->stats.tx_bytes += skb->len;
 			freeskb = 1;
 		} else {
@@ -594,9 +565,9 @@ netdev_tx_t arcnet_send_packet(struct sk_buff *skb,
 
 			if (proto->continue_tx &&
 			    proto->continue_tx(dev, txbuf)) {
-			  BUGMSG(D_NORMAL,
-				 "bug! continue_tx finished the first time! "
-				 "(proto='%c')\n", proto->suffix);
+				arc_printk(D_NORMAL, dev,
+					   "bug! continue_tx finished the first time! (proto='%c')\n",
+					   proto->suffix);
 			}
 		}
 		retval = NETDEV_TX_OK;
@@ -606,61 +577,62 @@ netdev_tx_t arcnet_send_packet(struct sk_buff *skb,
 		freeskb = 0;
 	}
 
-	BUGMSG(D_DEBUG, "%s: %d: %s, status: %x\n",__FILE__,__LINE__,__func__,ASTATUS());
+	arc_printk(D_DEBUG, dev, "%s: %d: %s, status: %x\n",
+		   __FILE__, __LINE__, __func__, lp->hw.status(dev));
 	/* make sure we didn't ignore a TX IRQ while we were in here */
-	AINTMASK(0);
+	lp->hw.intmask(dev, 0);
 
-	BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
-	lp->intmask |= TXFREEflag|EXCNAKflag;
-	AINTMASK(lp->intmask);
-	BUGMSG(D_DEBUG, "%s: %d: %s, status: %x\n",__FILE__,__LINE__,__func__,ASTATUS());
+	arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__);
+	lp->intmask |= TXFREEflag | EXCNAKflag;
+	lp->hw.intmask(dev, lp->intmask);
+	arc_printk(D_DEBUG, dev, "%s: %d: %s, status: %x\n",
+		   __FILE__, __LINE__, __func__, lp->hw.status(dev));
 
 	spin_unlock_irqrestore(&lp->lock, flags);
-	if (freeskb) {
+	if (freeskb)
 		dev_kfree_skb(skb);
-	}
+
 	return retval;		/* no need to try again */
 }
+EXPORT_SYMBOL(arcnet_send_packet);
 
-
-/*
- * Actually start transmitting a packet that was loaded into a buffer
+/* Actually start transmitting a packet that was loaded into a buffer
  * by prepare_tx.  This should _only_ be called by the interrupt handler.
  */
 static int go_tx(struct net_device *dev)
 {
 	struct arcnet_local *lp = netdev_priv(dev);
 
-	BUGMSG(D_DURING, "go_tx: status=%Xh, intmask=%Xh, next_tx=%d, cur_tx=%d\n",
-	       ASTATUS(), lp->intmask, lp->next_tx, lp->cur_tx);
+	arc_printk(D_DURING, dev, "go_tx: status=%Xh, intmask=%Xh, next_tx=%d, cur_tx=%d\n",
+		   lp->hw.status(dev), lp->intmask, lp->next_tx, lp->cur_tx);
 
 	if (lp->cur_tx != -1 || lp->next_tx == -1)
 		return 0;
 
-	BUGLVL(D_TX) arcnet_dump_packet(dev, lp->next_tx, "go_tx", 0);
+	if (BUGLVL(D_TX))
+		arcnet_dump_packet(dev, lp->next_tx, "go_tx", 0);
 
 	lp->cur_tx = lp->next_tx;
 	lp->next_tx = -1;
 
 	/* start sending */
-	ACOMMAND(TXcmd | (lp->cur_tx << 3));
+	lp->hw.command(dev, TXcmd | (lp->cur_tx << 3));
 
 	dev->stats.tx_packets++;
 	lp->lasttrans_dest = lp->lastload_dest;
 	lp->lastload_dest = 0;
 	lp->excnak_pending = 0;
-	lp->intmask |= TXFREEflag|EXCNAKflag;
+	lp->intmask |= TXFREEflag | EXCNAKflag;
 
 	return 1;
 }
 
-
 /* Called by the kernel when transmit times out */
 void arcnet_timeout(struct net_device *dev)
 {
 	unsigned long flags;
 	struct arcnet_local *lp = netdev_priv(dev);
-	int status = ASTATUS();
+	int status = lp->hw.status(dev);
 	char *msg;
 
 	spin_lock_irqsave(&lp->lock, flags);
@@ -670,30 +642,29 @@ void arcnet_timeout(struct net_device *dev)
 		msg = "";
 		dev->stats.tx_aborted_errors++;
 		lp->timed_out = 1;
-		ACOMMAND(NOTXcmd | (lp->cur_tx << 3));
+		lp->hw.command(dev, NOTXcmd | (lp->cur_tx << 3));
 	}
 	dev->stats.tx_errors++;
 
 	/* make sure we didn't miss a TX or a EXC NAK IRQ */
-	AINTMASK(0);
-	lp->intmask |= TXFREEflag|EXCNAKflag;
-	AINTMASK(lp->intmask);
-	
+	lp->hw.intmask(dev, 0);
+	lp->intmask |= TXFREEflag | EXCNAKflag;
+	lp->hw.intmask(dev, lp->intmask);
+
 	spin_unlock_irqrestore(&lp->lock, flags);
 
-	if (time_after(jiffies, lp->last_timeout + 10*HZ)) {
-		BUGMSG(D_EXTRA, "tx timed out%s (status=%Xh, intmask=%Xh, dest=%02Xh)\n",
-		       msg, status, lp->intmask, lp->lasttrans_dest);
+	if (time_after(jiffies, lp->last_timeout + 10 * HZ)) {
+		arc_printk(D_EXTRA, dev, "tx timed out%s (status=%Xh, intmask=%Xh, dest=%02Xh)\n",
+			   msg, status, lp->intmask, lp->lasttrans_dest);
 		lp->last_timeout = jiffies;
 	}
 
 	if (lp->cur_tx == -1)
 		netif_wake_queue(dev);
 }
+EXPORT_SYMBOL(arcnet_timeout);
 
-
-/*
- * The typical workload of the driver: Handle the network interface
+/* The typical workload of the driver: Handle the network interface
  * interrupts. Establish which device needs attention, and call the correct
  * chipset interrupt handler.
  */
@@ -704,125 +675,125 @@ irqreturn_t arcnet_interrupt(int irq, void *dev_id)
 	int recbuf, status, diagstatus, didsomething, boguscount;
 	int retval = IRQ_NONE;
 
-	BUGMSG(D_DURING, "\n");
+	arc_printk(D_DURING, dev, "\n");
 
-	BUGMSG(D_DURING, "in arcnet_interrupt\n");
+	arc_printk(D_DURING, dev, "in arcnet_interrupt\n");
 
 	lp = netdev_priv(dev);
 	BUG_ON(!lp);
-		
+
 	spin_lock(&lp->lock);
 
-	/*
-	 * RESET flag was enabled - if device is not running, we must clear it right
-	 * away (but nothing else).
+	/* RESET flag was enabled - if device is not running, we must
+	 * clear it right away (but nothing else).
 	 */
 	if (!netif_running(dev)) {
-		if (ASTATUS() & RESETflag)
-			ACOMMAND(CFLAGScmd | RESETclear);
-		AINTMASK(0);
+		if (lp->hw.status(dev) & RESETflag)
+			lp->hw.command(dev, CFLAGScmd | RESETclear);
+		lp->hw.intmask(dev, 0);
 		spin_unlock(&lp->lock);
 		return retval;
 	}
 
-	BUGMSG(D_DURING, "in arcnet_inthandler (status=%Xh, intmask=%Xh)\n",
-	       ASTATUS(), lp->intmask);
+	arc_printk(D_DURING, dev, "in arcnet_inthandler (status=%Xh, intmask=%Xh)\n",
+		   lp->hw.status(dev), lp->intmask);
 
 	boguscount = 5;
 	do {
-		status = ASTATUS();
-                diagstatus = (status >> 8) & 0xFF;
+		status = lp->hw.status(dev);
+		diagstatus = (status >> 8) & 0xFF;
 
-		BUGMSG(D_DEBUG, "%s: %d: %s: status=%x\n",
-			__FILE__,__LINE__,__func__,status);
+		arc_printk(D_DEBUG, dev, "%s: %d: %s: status=%x\n",
+			   __FILE__, __LINE__, __func__, status);
 		didsomething = 0;
 
-		/*
-		 * RESET flag was enabled - card is resetting and if RX is
+		/* RESET flag was enabled - card is resetting and if RX is
 		 * disabled, it's NOT because we just got a packet.
-		 * 
-		 * The card is in an undefined state.  Clear it out and start over.
+		 *
+		 * The card is in an undefined state.
+		 * Clear it out and start over.
 		 */
 		if (status & RESETflag) {
-			BUGMSG(D_NORMAL, "spurious reset (status=%Xh)\n", status);
+			arc_printk(D_NORMAL, dev, "spurious reset (status=%Xh)\n",
+				   status);
 			arcnet_close(dev);
 			arcnet_open(dev);
 
 			/* get out of the interrupt handler! */
 			break;
 		}
-		/* 
-		 * RX is inhibited - we must have received something. Prepare to
-		 * receive into the next buffer.
-		 * 
-		 * We don't actually copy the received packet from the card until
-		 * after the transmit handler runs (and possibly launches the next
-		 * tx); this should improve latency slightly if we get both types
-		 * of interrupts at once. 
+		/* RX is inhibited - we must have received something.
+		 * Prepare to receive into the next buffer.
+		 *
+		 * We don't actually copy the received packet from the card
+		 * until after the transmit handler runs (and possibly
+		 * launches the next tx); this should improve latency slightly
+		 * if we get both types of interrupts at once.
 		 */
 		recbuf = -1;
 		if (status & lp->intmask & NORXflag) {
 			recbuf = lp->cur_rx;
-			BUGMSG(D_DURING, "Buffer #%d: receive irq (status=%Xh)\n",
-			       recbuf, status);
+			arc_printk(D_DURING, dev, "Buffer #%d: receive irq (status=%Xh)\n",
+				   recbuf, status);
 
 			lp->cur_rx = get_arcbuf(dev);
 			if (lp->cur_rx != -1) {
-				BUGMSG(D_DURING, "enabling receive to buffer #%d\n",
-				       lp->cur_rx);
-				ACOMMAND(RXcmd | (lp->cur_rx << 3) | RXbcasts);
+				arc_printk(D_DURING, dev, "enabling receive to buffer #%d\n",
+					   lp->cur_rx);
+				lp->hw.command(dev, RXcmd | (lp->cur_rx << 3) | RXbcasts);
 			}
 			didsomething++;
 		}
 
-		if((diagstatus & EXCNAKflag)) {
-			BUGMSG(D_DURING, "EXCNAK IRQ (diagstat=%Xh)\n",
-			       diagstatus);
+		if ((diagstatus & EXCNAKflag)) {
+			arc_printk(D_DURING, dev, "EXCNAK IRQ (diagstat=%Xh)\n",
+				   diagstatus);
 
-                        ACOMMAND(NOTXcmd);      /* disable transmit */
-                        lp->excnak_pending = 1;
+			lp->hw.command(dev, NOTXcmd);      /* disable transmit */
+			lp->excnak_pending = 1;
 
-                        ACOMMAND(EXCNAKclear);
+			lp->hw.command(dev, EXCNAKclear);
 			lp->intmask &= ~(EXCNAKflag);
-                        didsomething++;
-                }
-
+			didsomething++;
+		}
 
 		/* a transmit finished, and we're interested in it. */
 		if ((status & lp->intmask & TXFREEflag) || lp->timed_out) {
-			lp->intmask &= ~(TXFREEflag|EXCNAKflag);
+			lp->intmask &= ~(TXFREEflag | EXCNAKflag);
 
-			BUGMSG(D_DURING, "TX IRQ (stat=%Xh)\n", status);
+			arc_printk(D_DURING, dev, "TX IRQ (stat=%Xh)\n",
+				   status);
 
 			if (lp->cur_tx != -1 && !lp->timed_out) {
-				if(!(status & TXACKflag)) {
+				if (!(status & TXACKflag)) {
 					if (lp->lasttrans_dest != 0) {
-						BUGMSG(D_EXTRA,
-						       "transmit was not acknowledged! "
-						       "(status=%Xh, dest=%02Xh)\n",
-						       status, lp->lasttrans_dest);
+						arc_printk(D_EXTRA, dev,
+							   "transmit was not acknowledged! (status=%Xh, dest=%02Xh)\n",
+							   status,
+							   lp->lasttrans_dest);
 						dev->stats.tx_errors++;
 						dev->stats.tx_carrier_errors++;
 					} else {
-						BUGMSG(D_DURING,
-						       "broadcast was not acknowledged; that's normal "
-						       "(status=%Xh, dest=%02Xh)\n",
-						       status, lp->lasttrans_dest);
+						arc_printk(D_DURING, dev,
+							   "broadcast was not acknowledged; that's normal (status=%Xh, dest=%02Xh)\n",
+							   status,
+							   lp->lasttrans_dest);
 					}
 				}
 
 				if (lp->outgoing.proto &&
 				    lp->outgoing.proto->ack_tx) {
-				  int ackstatus;
-				  if(status & TXACKflag)
-                                    ackstatus=2;
-                                  else if(lp->excnak_pending)
-                                    ackstatus=1;
-                                  else
-                                    ackstatus=0;
-
-                                  lp->outgoing.proto
-                                    ->ack_tx(dev, ackstatus);
+					int ackstatus;
+
+					if (status & TXACKflag)
+						ackstatus = 2;
+					else if (lp->excnak_pending)
+						ackstatus = 1;
+					else
+						ackstatus = 0;
+
+					lp->outgoing.proto
+						->ack_tx(dev, ackstatus);
 				}
 			}
 			if (lp->cur_tx != -1)
@@ -836,17 +807,18 @@ irqreturn_t arcnet_interrupt(int irq, void *dev_id)
 			go_tx(dev);
 
 			/* continue a split packet, if any */
-			if (lp->outgoing.proto && lp->outgoing.proto->continue_tx) {
+			if (lp->outgoing.proto &&
+			    lp->outgoing.proto->continue_tx) {
 				int txbuf = get_arcbuf(dev);
+
 				if (txbuf != -1) {
 					if (lp->outgoing.proto->continue_tx(dev, txbuf)) {
 						/* that was the last segment */
 						dev->stats.tx_bytes += lp->outgoing.skb->len;
-						if(!lp->outgoing.proto->ack_tx)
-						  {
-						    dev_kfree_skb_irq(lp->outgoing.skb);
-						    lp->outgoing.proto = NULL;
-						  }
+						if (!lp->outgoing.proto->ack_tx) {
+							dev_kfree_skb_irq(lp->outgoing.skb);
+							lp->outgoing.proto = NULL;
+						}
 					}
 					lp->next_tx = txbuf;
 				}
@@ -857,7 +829,8 @@ irqreturn_t arcnet_interrupt(int irq, void *dev_id)
 		}
 		/* now process the received packet, if any */
 		if (recbuf != -1) {
-			BUGLVL(D_RX) arcnet_dump_packet(dev, recbuf, "rx irq", 0);
+			if (BUGLVL(D_RX))
+				arcnet_dump_packet(dev, recbuf, "rx irq", 0);
 
 			arcnet_rx(dev, recbuf);
 			release_arcbuf(dev, recbuf);
@@ -865,32 +838,32 @@ irqreturn_t arcnet_interrupt(int irq, void *dev_id)
 			didsomething++;
 		}
 		if (status & lp->intmask & RECONflag) {
-			ACOMMAND(CFLAGScmd | CONFIGclear);
+			lp->hw.command(dev, CFLAGScmd | CONFIGclear);
 			dev->stats.tx_carrier_errors++;
 
-			BUGMSG(D_RECON, "Network reconfiguration detected (status=%Xh)\n",
-			       status);
+			arc_printk(D_RECON, dev, "Network reconfiguration detected (status=%Xh)\n",
+				   status);
 			/* MYRECON bit is at bit 7 of diagstatus */
-			if(diagstatus & 0x80)
-				BUGMSG(D_RECON,"Put out that recon myself\n");
+			if (diagstatus & 0x80)
+				arc_printk(D_RECON, dev, "Put out that recon myself\n");
 
 			/* is the RECON info empty or old? */
 			if (!lp->first_recon || !lp->last_recon ||
 			    time_after(jiffies, lp->last_recon + HZ * 10)) {
 				if (lp->network_down)
-					BUGMSG(D_NORMAL, "reconfiguration detected: cabling restored?\n");
+					arc_printk(D_NORMAL, dev, "reconfiguration detected: cabling restored?\n");
 				lp->first_recon = lp->last_recon = jiffies;
 				lp->num_recons = lp->network_down = 0;
 
-				BUGMSG(D_DURING, "recon: clearing counters.\n");
+				arc_printk(D_DURING, dev, "recon: clearing counters.\n");
 			} else {	/* add to current RECON counter */
 				lp->last_recon = jiffies;
 				lp->num_recons++;
 
-				BUGMSG(D_DURING, "recon: counter=%d, time=%lds, net=%d\n",
-				       lp->num_recons,
-				 (lp->last_recon - lp->first_recon) / HZ,
-				       lp->network_down);
+				arc_printk(D_DURING, dev, "recon: counter=%d, time=%lds, net=%d\n",
+					   lp->num_recons,
+					   (lp->last_recon - lp->first_recon) / HZ,
+					   lp->network_down);
 
 				/* if network is marked up;
 				 * and first_recon and last_recon are 60+ apart;
@@ -902,46 +875,44 @@ irqreturn_t arcnet_interrupt(int irq, void *dev_id)
 				    (lp->last_recon - lp->first_recon) <= HZ * 60 &&
 				    lp->num_recons >= RECON_THRESHOLD) {
 					lp->network_down = 1;
-					BUGMSG(D_NORMAL, "many reconfigurations detected: cabling problem?\n");
+					arc_printk(D_NORMAL, dev, "many reconfigurations detected: cabling problem?\n");
 				} else if (!lp->network_down &&
 					   lp->last_recon - lp->first_recon > HZ * 60) {
-					/* reset counters if we've gone for over a minute. */
+					/* reset counters if we've gone for
+					 *  over a minute.
+					 */
 					lp->first_recon = lp->last_recon;
 					lp->num_recons = 1;
 				}
 			}
 		} else if (lp->network_down &&
-				time_after(jiffies, lp->last_recon + HZ * 10)) {
+			   time_after(jiffies, lp->last_recon + HZ * 10)) {
 			if (lp->network_down)
-				BUGMSG(D_NORMAL, "cabling restored?\n");
+				arc_printk(D_NORMAL, dev, "cabling restored?\n");
 			lp->first_recon = lp->last_recon = 0;
 			lp->num_recons = lp->network_down = 0;
 
-			BUGMSG(D_DURING, "not recon: clearing counters anyway.\n");
+			arc_printk(D_DURING, dev, "not recon: clearing counters anyway.\n");
 		}
 
-		if(didsomething) {
+		if (didsomething)
 			retval |= IRQ_HANDLED;
-		}
-	}
-	while (--boguscount && didsomething);
-
-	BUGMSG(D_DURING, "arcnet_interrupt complete (status=%Xh, count=%d)\n",
-	       ASTATUS(), boguscount);
-	BUGMSG(D_DURING, "\n");
+	} while (--boguscount && didsomething);
 
+	arc_printk(D_DURING, dev, "arcnet_interrupt complete (status=%Xh, count=%d)\n",
+		   lp->hw.status(dev), boguscount);
+	arc_printk(D_DURING, dev, "\n");
 
-	AINTMASK(0);
+	lp->hw.intmask(dev, 0);
 	udelay(1);
-	AINTMASK(lp->intmask);
-	
+	lp->hw.intmask(dev, lp->intmask);
+
 	spin_unlock(&lp->lock);
 	return retval;
 }
+EXPORT_SYMBOL(arcnet_interrupt);
 
-
-/*
- * This is a generic packet receiver that calls arcnet??_rx depending on the
+/* This is a generic packet receiver that calls arcnet??_rx depending on the
  * protocol ID found.
  */
 static void arcnet_rx(struct net_device *dev, int bufnum)
@@ -963,32 +934,31 @@ static void arcnet_rx(struct net_device *dev, int bufnum)
 	}
 
 	/* get the full header, if possible */
-	if (sizeof(pkt.soft) <= length)
+	if (sizeof(pkt.soft) <= length) {
 		lp->hw.copy_from_card(dev, bufnum, ofs, soft, sizeof(pkt.soft));
-	else {
+	} else {
 		memset(&pkt.soft, 0, sizeof(pkt.soft));
 		lp->hw.copy_from_card(dev, bufnum, ofs, soft, length);
 	}
 
-	BUGMSG(D_DURING, "Buffer #%d: received packet from %02Xh to %02Xh "
-	       "(%d+4 bytes)\n",
-	       bufnum, pkt.hard.source, pkt.hard.dest, length);
+	arc_printk(D_DURING, dev, "Buffer #%d: received packet from %02Xh to %02Xh (%d+4 bytes)\n",
+		   bufnum, pkt.hard.source, pkt.hard.dest, length);
 
 	dev->stats.rx_packets++;
 	dev->stats.rx_bytes += length + ARC_HDR_SIZE;
 
 	/* call the right receiver for the protocol */
 	if (arc_proto_map[soft->proto]->is_ip) {
-		BUGLVL(D_PROTO) {
+		if (BUGLVL(D_PROTO)) {
 			struct ArcProto
 			*oldp = arc_proto_map[lp->default_proto[pkt.hard.source]],
 			*newp = arc_proto_map[soft->proto];
 
 			if (oldp != newp) {
-				BUGMSG(D_PROTO,
-				       "got protocol %02Xh; encap for host %02Xh is now '%c'"
-				       " (was '%c')\n", soft->proto, pkt.hard.source,
-				       newp->suffix, oldp->suffix);
+				arc_printk(D_PROTO, dev,
+					   "got protocol %02Xh; encap for host %02Xh is now '%c' (was '%c')\n",
+					   soft->proto, pkt.hard.source,
+					   newp->suffix, oldp->suffix);
 			}
 		}
 
@@ -1002,30 +972,27 @@ static void arcnet_rx(struct net_device *dev, int bufnum)
 	arc_proto_map[soft->proto]->rx(dev, bufnum, &pkt, length);
 }
 
-
 static void null_rx(struct net_device *dev, int bufnum,
 		    struct archdr *pkthdr, int length)
 {
-	BUGMSG(D_PROTO,
-	"rx: don't know how to deal with proto %02Xh from host %02Xh.\n",
-	       pkthdr->soft.rfc1201.proto, pkthdr->hard.source);
+	arc_printk(D_PROTO, dev,
+		   "rx: don't know how to deal with proto %02Xh from host %02Xh.\n",
+		   pkthdr->soft.rfc1201.proto, pkthdr->hard.source);
 }
 
-
 static int null_build_header(struct sk_buff *skb, struct net_device *dev,
 			     unsigned short type, uint8_t daddr)
 {
 	struct arcnet_local *lp = netdev_priv(dev);
 
-	BUGMSG(D_PROTO,
-	       "tx: can't build header for encap %02Xh; load a protocol driver.\n",
-	       lp->default_proto[daddr]);
+	arc_printk(D_PROTO, dev,
+		   "tx: can't build header for encap %02Xh; load a protocol driver.\n",
+		   lp->default_proto[daddr]);
 
 	/* always fails */
 	return 0;
 }
 
-
 /* the "do nothing" prepare_tx function warns that there's nothing to do. */
 static int null_prepare_tx(struct net_device *dev, struct archdr *pkt,
 			   int length, int bufnum)
@@ -1033,7 +1000,7 @@ static int null_prepare_tx(struct net_device *dev, struct archdr *pkt,
 	struct arcnet_local *lp = netdev_priv(dev);
 	struct arc_hardware newpkt;
 
-	BUGMSG(D_PROTO, "tx: no encap for this host; load a protocol driver.\n");
+	arc_printk(D_PROTO, dev, "tx: no encap for this host; load a protocol driver.\n");
 
 	/* send a packet to myself -- will never get received, of course */
 	newpkt.source = newpkt.dest = dev->dev_addr[0];

drivers/net/arcnet/capmode.c

@@ -26,6 +26,8 @@
  * **********************
  */
 
+#define pr_fmt(fmt) "arcnet:" KBUILD_MODNAME ": " fmt
+
 #include <linux/module.h>
 #include <linux/gfp.h>
 #include <linux/init.h>
@@ -33,9 +35,8 @@
 #include <net/arp.h>
 #include <linux/netdevice.h>
 #include <linux/skbuff.h>
-#include <linux/arcdevice.h>
 
-#define VERSION "arcnet: cap mode (`c') encapsulation support loaded.\n"
+#include "arcdevice.h"
 
 /* packet receiver */
 static void rx(struct net_device *dev, int bufnum,
@@ -47,7 +48,8 @@ static void rx(struct net_device *dev, int bufnum,
 	char *pktbuf, *pkthdrbuf;
 	int ofs;
 
-	BUGMSG(D_DURING, "it's a raw(cap) packet (length=%d)\n", length);
+	arc_printk(D_DURING, dev, "it's a raw(cap) packet (length=%d)\n",
+		   length);
 
 	if (length >= MinTU)
 		ofs = 512 - length;
@@ -55,8 +57,7 @@ static void rx(struct net_device *dev, int bufnum,
 		ofs = 256 - length;
 
 	skb = alloc_skb(length + ARC_HDR_SIZE + sizeof(int), GFP_ATOMIC);
-	if (skb == NULL) {
-		BUGMSG(D_NORMAL, "Memory squeeze, dropping packet.\n");
+	if (!skb) {
 		dev->stats.rx_dropped++;
 		return;
 	}
@@ -66,17 +67,17 @@ static void rx(struct net_device *dev, int bufnum,
 	pkt = (struct archdr *)skb_mac_header(skb);
 	skb_pull(skb, ARC_HDR_SIZE);
 
-	/* up to sizeof(pkt->soft) has already been copied from the card */
-	/* squeeze in an int for the cap encapsulation */
-
-	/* use these variables to be sure we count in bytes, not in
-	   sizeof(struct archdr) */
-	pktbuf=(char*)pkt;
-	pkthdrbuf=(char*)pkthdr;
-	memcpy(pktbuf, pkthdrbuf, ARC_HDR_SIZE+sizeof(pkt->soft.cap.proto));
-	memcpy(pktbuf+ARC_HDR_SIZE+sizeof(pkt->soft.cap.proto)+sizeof(int),
-	       pkthdrbuf+ARC_HDR_SIZE+sizeof(pkt->soft.cap.proto),
-	       sizeof(struct archdr)-ARC_HDR_SIZE-sizeof(pkt->soft.cap.proto));
+	/* up to sizeof(pkt->soft) has already been copied from the card
+	 * squeeze in an int for the cap encapsulation
+	 * use these variables to be sure we count in bytes, not in
+	 * sizeof(struct archdr)
+	 */
+	pktbuf = (char *)pkt;
+	pkthdrbuf = (char *)pkthdr;
+	memcpy(pktbuf, pkthdrbuf, ARC_HDR_SIZE + sizeof(pkt->soft.cap.proto));
+	memcpy(pktbuf + ARC_HDR_SIZE + sizeof(pkt->soft.cap.proto) + sizeof(int),
+	       pkthdrbuf + ARC_HDR_SIZE + sizeof(pkt->soft.cap.proto),
+	       sizeof(struct archdr) - ARC_HDR_SIZE - sizeof(pkt->soft.cap.proto));
 
 	if (length > sizeof(pkt->soft))
 		lp->hw.copy_from_card(dev, bufnum, ofs + sizeof(pkt->soft),
@@ -84,15 +85,14 @@ static void rx(struct net_device *dev, int bufnum,
 				      + sizeof(int),
 				      length - sizeof(pkt->soft));
 
-	BUGLVL(D_SKB) arcnet_dump_skb(dev, skb, "rx");
+	if (BUGLVL(D_SKB))
+		arcnet_dump_skb(dev, skb, "rx");
 
 	skb->protocol = cpu_to_be16(ETH_P_ARCNET);
 	netif_rx(skb);
 }
 
-
-/*
- * Create the ARCnet hard/soft headers for cap mode.
+/* Create the ARCnet hard/soft headers for cap mode.
  * There aren't any soft headers in cap mode - not even the protocol id.
  */
 static int build_header(struct sk_buff *skb,
@@ -101,12 +101,12 @@ static int build_header(struct sk_buff *skb,
 			uint8_t daddr)
 {
 	int hdr_size = ARC_HDR_SIZE;
-	struct archdr *pkt = (struct archdr *) skb_push(skb, hdr_size);
+	struct archdr *pkt = (struct archdr *)skb_push(skb, hdr_size);
 
-	BUGMSG(D_PROTO, "Preparing header for cap packet %x.\n",
-	       *((int*)&pkt->soft.cap.cookie[0]));
-	/*
-	 * Set the source hardware address.
+	arc_printk(D_PROTO, dev, "Preparing header for cap packet %x.\n",
+		   *((int *)&pkt->soft.cap.cookie[0]));
+
+	/* Set the source hardware address.
 	 *
 	 * This is pretty pointless for most purposes, but it can help in
 	 * debugging.  ARCnet does not allow us to change the source address in
@@ -117,9 +117,8 @@ static int build_header(struct sk_buff *skb,
 	/* see linux/net/ethernet/eth.c to see where I got the following */
 
 	if (dev->flags & (IFF_LOOPBACK | IFF_NOARP)) {
-		/*
-		 * FIXME: fill in the last byte of the dest ipaddr here to better
-		 * comply with RFC1051 in "noarp" mode.
+		/* FIXME: fill in the last byte of the dest ipaddr here to
+		 * better comply with RFC1051 in "noarp" mode.
 		 */
 		pkt->hard.dest = 0;
 		return hdr_size;
@@ -130,7 +129,6 @@ static int build_header(struct sk_buff *skb,
 	return hdr_size;	/* success */
 }
 
-
 static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length,
 		      int bufnum)
 {
@@ -138,22 +136,21 @@ static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length,
 	struct arc_hardware *hard = &pkt->hard;
 	int ofs;
 
-
 	/* hard header is not included in packet length */
 	length -= ARC_HDR_SIZE;
 	/* And neither is the cookie field */
 	length -= sizeof(int);
 
-	BUGMSG(D_DURING, "prepare_tx: txbufs=%d/%d/%d\n",
-	       lp->next_tx, lp->cur_tx, bufnum);
+	arc_printk(D_DURING, dev, "prepare_tx: txbufs=%d/%d/%d\n",
+		   lp->next_tx, lp->cur_tx, bufnum);
 
-	BUGMSG(D_PROTO, "Sending for cap packet %x.\n",
-	       *((int*)&pkt->soft.cap.cookie[0]));
+	arc_printk(D_PROTO, dev, "Sending for cap packet %x.\n",
+		   *((int *)&pkt->soft.cap.cookie[0]));
 
 	if (length > XMTU) {
 		/* should never happen! other people already check for this. */
-		BUGMSG(D_NORMAL, "Bug!  prepare_tx with size %d (> %d)\n",
-		       length, XMTU);
+		arc_printk(D_NORMAL, dev, "Bug!  prepare_tx with size %d (> %d)\n",
+			   length, XMTU);
 		length = XMTU;
 	}
 	if (length > MinTU) {
@@ -162,11 +159,12 @@ static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length,
 	} else if (length > MTU) {
 		hard->offset[0] = 0;
 		hard->offset[1] = ofs = 512 - length - 3;
-	} else
+	} else {
 		hard->offset[0] = ofs = 256 - length;
+	}
 
-	BUGMSG(D_DURING, "prepare_tx: length=%d ofs=%d\n",
-	       length,ofs);
+	arc_printk(D_DURING, dev, "prepare_tx: length=%d ofs=%d\n",
+		   length, ofs);
 
 	/* Copy the arcnet-header + the protocol byte down: */
 	lp->hw.copy_to_card(dev, bufnum, 0, hard, ARC_HDR_SIZE);
@@ -174,9 +172,10 @@ static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length,
 			    sizeof(pkt->soft.cap.proto));
 
 	/* Skip the extra integer we have written into it as a cookie
-	   but write the rest of the message: */
-	lp->hw.copy_to_card(dev, bufnum, ofs+1,
-			    ((unsigned char*)&pkt->soft.cap.mes),length-1);
+	 * but write the rest of the message:
+	 */
+	lp->hw.copy_to_card(dev, bufnum, ofs + 1,
+			    ((unsigned char *)&pkt->soft.cap.mes), length - 1);
 
 	lp->lastload_dest = hard->dest;
 
@@ -188,21 +187,20 @@ static int ack_tx(struct net_device *dev, int acked)
 	struct arcnet_local *lp = netdev_priv(dev);
 	struct sk_buff *ackskb;
 	struct archdr *ackpkt;
-	int length=sizeof(struct arc_cap);
+	int length = sizeof(struct arc_cap);
 
-	BUGMSG(D_DURING, "capmode: ack_tx: protocol: %x: result: %d\n",
-		lp->outgoing.skb->protocol, acked);
+	arc_printk(D_DURING, dev, "capmode: ack_tx: protocol: %x: result: %d\n",
+		   lp->outgoing.skb->protocol, acked);
 
-	BUGLVL(D_SKB) arcnet_dump_skb(dev, lp->outgoing.skb, "ack_tx");
+	if (BUGLVL(D_SKB))
+		arcnet_dump_skb(dev, lp->outgoing.skb, "ack_tx");
 
 	/* Now alloc a skb to send back up through the layers: */
-	ackskb = alloc_skb(length + ARC_HDR_SIZE , GFP_ATOMIC);
-	if (ackskb == NULL) {
-		BUGMSG(D_NORMAL, "Memory squeeze, can't acknowledge.\n");
+	ackskb = alloc_skb(length + ARC_HDR_SIZE, GFP_ATOMIC);
+	if (!ackskb)
 		goto free_outskb;
-	}
 
-	skb_put(ackskb, length + ARC_HDR_SIZE );
+	skb_put(ackskb, length + ARC_HDR_SIZE);
 	ackskb->dev = dev;
 
 	skb_reset_mac_header(ackskb);
@@ -212,39 +210,40 @@ static int ack_tx(struct net_device *dev, int acked)
 	skb_copy_from_linear_data(lp->outgoing.skb, ackpkt,
 				  ARC_HDR_SIZE + sizeof(struct arc_cap));
 	ackpkt->soft.cap.proto = 0; /* using protocol 0 for acknowledge */
-	ackpkt->soft.cap.mes.ack=acked;
+	ackpkt->soft.cap.mes.ack = acked;
 
-	BUGMSG(D_PROTO, "Ackknowledge for cap packet %x.\n",
-			*((int*)&ackpkt->soft.cap.cookie[0]));
+	arc_printk(D_PROTO, dev, "Ackknowledge for cap packet %x.\n",
+		   *((int *)&ackpkt->soft.cap.cookie[0]));
 
 	ackskb->protocol = cpu_to_be16(ETH_P_ARCNET);
 
-	BUGLVL(D_SKB) arcnet_dump_skb(dev, ackskb, "ack_tx_recv");
+	if (BUGLVL(D_SKB))
+		arcnet_dump_skb(dev, ackskb, "ack_tx_recv");
 	netif_rx(ackskb);
 
 free_outskb:
 	dev_kfree_skb_irq(lp->outgoing.skb);
-	lp->outgoing.proto = NULL; /* We are always finished when in this protocol */
+	lp->outgoing.proto = NULL;
+			/* We are always finished when in this protocol */
 
 	return 0;
 }
 
-static struct ArcProto capmode_proto =
-{
-	'r',
-	XMTU,
-	0,
-	rx,
-	build_header,
-	prepare_tx,
-	NULL,
-	ack_tx
+static struct ArcProto capmode_proto = {
+	.suffix		= 'r',
+	.mtu		= XMTU,
+	.rx		= rx,
+	.build_header	= build_header,
+	.prepare_tx	= prepare_tx,
+	.ack_tx		= ack_tx
 };
 
-static void arcnet_cap_init(void)
+static int __init capmode_module_init(void)
 {
 	int count;
 
+	pr_info("cap mode (`c') encapsulation support loaded\n");
+
 	for (count = 1; count <= 8; count++)
 		if (arc_proto_map[count] == arc_proto_default)
 			arc_proto_map[count] = &capmode_proto;
@@ -255,12 +254,7 @@ static void arcnet_cap_init(void)
 
 	arc_proto_default = &capmode_proto;
 	arc_raw_proto = &capmode_proto;
-}
 
-static int __init capmode_module_init(void)
-{
-	printk(VERSION);
-	arcnet_cap_init();
 	return 0;
 }
 

drivers/net/arcnet/com20020-isa.c

@@ -1,6 +1,6 @@
 /*
  * Linux ARCnet driver - COM20020 chipset support
- * 
+ *
  * Written 1997 by David Woodhouse.
  * Written 1994-1999 by Avery Pennarun.
  * Written 1999-2000 by Martin Mares <mj@ucw.cz>.
@@ -25,6 +25,9 @@
  *
  * **********************
  */
+
+#define pr_fmt(fmt) "arcnet:" KBUILD_MODNAME ": " fmt
+
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/kernel.h>
@@ -36,16 +39,12 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/bootmem.h>
-#include <linux/arcdevice.h>
-#include <linux/com20020.h>
-
-#include <asm/io.h>
+#include <linux/io.h>
 
-#define VERSION "arcnet: COM20020 ISA support (by David Woodhouse et al.)\n"
+#include "arcdevice.h"
+#include "com20020.h"
 
-
-/*
- * We cannot (yet) probe for an IO mapped card, although we can check that
+/* We cannot (yet) probe for an IO mapped card, although we can check that
  * it's where we were told it was, and even do autoirq.
  */
 static int __init com20020isa_probe(struct net_device *dev)
@@ -55,21 +54,21 @@ static int __init com20020isa_probe(struct net_device *dev)
 	struct arcnet_local *lp = netdev_priv(dev);
 	int err;
 
-	BUGLVL(D_NORMAL) printk(VERSION);
+	if (BUGLVL(D_NORMAL))
+		pr_info("%s\n", "COM20020 ISA support (by David Woodhouse et al.)");
 
 	ioaddr = dev->base_addr;
 	if (!ioaddr) {
-		BUGMSG(D_NORMAL, "No autoprobe (yet) for IO mapped cards; you "
-		       "must specify the base address!\n");
+		arc_printk(D_NORMAL, dev, "No autoprobe (yet) for IO mapped cards; you must specify the base address!\n");
 		return -ENODEV;
 	}
 	if (!request_region(ioaddr, ARCNET_TOTAL_SIZE, "arcnet (COM20020)")) {
-		BUGMSG(D_NORMAL, "IO region %xh-%xh already allocated.\n",
-		       ioaddr, ioaddr + ARCNET_TOTAL_SIZE - 1);
+		arc_printk(D_NORMAL, dev, "IO region %xh-%xh already allocated.\n",
+			   ioaddr, ioaddr + ARCNET_TOTAL_SIZE - 1);
 		return -ENXIO;
 	}
-	if (ASTATUS() == 0xFF) {
-		BUGMSG(D_NORMAL, "IO address %x empty\n", ioaddr);
+	if (arcnet_inb(ioaddr, COM20020_REG_R_STATUS) == 0xFF) {
+		arc_printk(D_NORMAL, dev, "IO address %x empty\n", ioaddr);
 		err = -ENODEV;
 		goto out;
 	}
@@ -83,23 +82,24 @@ static int __init com20020isa_probe(struct net_device *dev)
 		 * card has just reset and the NORXflag is on until
 		 * we tell it to start receiving.
 		 */
-		BUGMSG(D_INIT_REASONS, "intmask was %02Xh\n", inb(_INTMASK));
-		outb(0, _INTMASK);
+		arc_printk(D_INIT_REASONS, dev, "intmask was %02Xh\n",
+			   arcnet_inb(ioaddr, COM20020_REG_R_STATUS));
+		arcnet_outb(0, ioaddr, COM20020_REG_W_INTMASK);
 		airqmask = probe_irq_on();
-		outb(NORXflag, _INTMASK);
+		arcnet_outb(NORXflag, ioaddr, COM20020_REG_W_INTMASK);
 		udelay(1);
-		outb(0, _INTMASK);
+		arcnet_outb(0, ioaddr, COM20020_REG_W_INTMASK);
 		dev->irq = probe_irq_off(airqmask);
 
 		if ((int)dev->irq <= 0) {
-			BUGMSG(D_INIT_REASONS, "Autoprobe IRQ failed first time\n");
+			arc_printk(D_INIT_REASONS, dev, "Autoprobe IRQ failed first time\n");
 			airqmask = probe_irq_on();
-			outb(NORXflag, _INTMASK);
+			arcnet_outb(NORXflag, ioaddr, COM20020_REG_W_INTMASK);
 			udelay(5);
-			outb(0, _INTMASK);
+			arcnet_outb(0, ioaddr, COM20020_REG_W_INTMASK);
 			dev->irq = probe_irq_off(airqmask);
 			if ((int)dev->irq <= 0) {
-				BUGMSG(D_NORMAL, "Autoprobe IRQ failed.\n");
+				arc_printk(D_NORMAL, dev, "Autoprobe IRQ failed.\n");
 				err = -ENODEV;
 				goto out;
 			}
@@ -107,7 +107,9 @@ static int __init com20020isa_probe(struct net_device *dev)
 	}
 
 	lp->card_name = "ISA COM20020";
-	if ((err = com20020_found(dev, 0)) != 0)
+
+	err = com20020_found(dev, 0);
+	if (err != 0)
 		goto out;
 
 	return 0;
@@ -194,7 +196,7 @@ static int __init com20020isa_setup(char *s)
 
 	switch (ints[0]) {
 	default:		/* ERROR */
-		printk("com90xx: Too many arguments.\n");
+		pr_info("Too many arguments\n");
 	case 6:		/* Timeout */
 		timeout = ints[6];
 	case 5:		/* CKP value */

drivers/net/arcnet/com20020-pci.c

@@ -1,7 +1,7 @@
 /*
  * Linux ARCnet driver - COM20020 PCI support
  * Contemporary Controls PCI20 and SOHARD SH-ARC PCI
- * 
+ *
  * Written 1994-1999 by Avery Pennarun,
  *    based on an ISA version by David Woodhouse.
  * Written 1999-2000 by Martin Mares <mj@ucw.cz>.
@@ -26,6 +26,9 @@
  *
  * **********************
  */
+
+#define pr_fmt(fmt) "arcnet:" KBUILD_MODNAME ": " fmt
+
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/kernel.h>
@@ -36,14 +39,11 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/pci.h>
-#include <linux/arcdevice.h>
-#include <linux/com20020.h>
 #include <linux/list.h>
+#include <linux/io.h>
 
-#include <asm/io.h>
-
-
-#define VERSION "arcnet: COM20020 PCI support\n"
+#include "arcdevice.h"
+#include "com20020.h"
 
 /* Module parameters */
 
@@ -64,7 +64,8 @@ MODULE_LICENSE("GPL");
 
 static void com20020pci_remove(struct pci_dev *pdev);
 
-static int com20020pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+static int com20020pci_probe(struct pci_dev *pdev,
+			     const struct pci_device_id *id)
 {
 	struct com20020_pci_card_info *ci;
 	struct net_device *dev;
@@ -86,7 +87,6 @@ static int com20020pci_probe(struct pci_dev *pdev, const struct pci_device_id *i
 
 	INIT_LIST_HEAD(&priv->list_dev);
 
-
 	for (i = 0; i < ci->devcount; i++) {
 		struct com20020_pci_channel_map *cm = &ci->chan_map_tbl[i];
 		struct com20020_dev *card;
@@ -101,13 +101,13 @@ static int com20020pci_probe(struct pci_dev *pdev, const struct pci_device_id *i
 
 		lp = netdev_priv(dev);
 
-		BUGMSG(D_NORMAL, "%s Controls\n", ci->name);
+		arc_printk(D_NORMAL, dev, "%s Controls\n", ci->name);
 		ioaddr = pci_resource_start(pdev, cm->bar) + cm->offset;
 
 		r = devm_request_region(&pdev->dev, ioaddr, cm->size,
 					"com20020-pci");
 		if (!r) {
-			pr_err("IO region %xh-%xh already allocated.\n",
+			pr_err("IO region %xh-%xh already allocated\n",
 			       ioaddr, ioaddr + cm->size - 1);
 			ret = -EBUSY;
 			goto out_port;
@@ -117,8 +117,8 @@ static int com20020pci_probe(struct pci_dev *pdev, const struct pci_device_id *i
 		 * ARCNET controller needs
 		 * this access to detect bustype
 		 */
-		outb(0x00, ioaddr + 1);
-		inb(ioaddr + 1);
+		arcnet_outb(0x00, ioaddr, COM20020_REG_W_COMMAND);
+		arcnet_inb(ioaddr, COM20020_REG_R_DIAGSTAT);
 
 		dev->base_addr = ioaddr;
 		dev->dev_addr[0] = node;
@@ -131,7 +131,7 @@ static int com20020pci_probe(struct pci_dev *pdev, const struct pci_device_id *i
 		lp->timeout = timeout;
 		lp->hw.owner = THIS_MODULE;
 
-		if (ASTATUS() == 0xFF) {
+		if (arcnet_inb(ioaddr, COM20020_REG_R_STATUS) == 0xFF) {
 			pr_err("IO address %Xh is empty!\n", ioaddr);
 			ret = -EIO;
 			goto out_port;
@@ -143,10 +143,8 @@ static int com20020pci_probe(struct pci_dev *pdev, const struct pci_device_id *i
 
 		card = devm_kzalloc(&pdev->dev, sizeof(struct com20020_dev),
 				    GFP_KERNEL);
-		if (!card) {
-			pr_err("%s out of memory!\n", __func__);
+		if (!card)
 			return -ENOMEM;
-		}
 
 		card->index = i;
 		card->pci_priv = priv;
@@ -190,7 +188,11 @@ static struct com20020_pci_card_info card_info_10mbit = {
 	.name = "ARC-PCI",
 	.devcount = 1,
 	.chan_map_tbl = {
-		{ 2, 0x00, 0x08 },
+		{
+			.bar = 2,
+			.offset = 0x00,
+			.size = 0x08,
+		},
 	},
 	.flags = ARC_CAN_10MBIT,
 };
@@ -199,7 +201,11 @@ static struct com20020_pci_card_info card_info_5mbit = {
 	.name = "ARC-PCI",
 	.devcount = 1,
 	.chan_map_tbl = {
-		{ 2, 0x00, 0x08 },
+		{
+			.bar = 2,
+			.offset = 0x00,
+			.size = 0x08,
+		},
 	},
 	.flags = ARC_IS_5MBIT,
 };
@@ -209,7 +215,11 @@ static struct com20020_pci_card_info card_info_sohard = {
 	.devcount = 1,
 	/* SOHARD needs PCI base addr 4 */
 	.chan_map_tbl = {
-		{4, 0x00, 0x08},
+		{
+			.bar = 4,
+			.offset = 0x00,
+			.size = 0x08
+		},
 	},
 	.flags = ARC_CAN_10MBIT,
 };
@@ -218,7 +228,11 @@ static struct com20020_pci_card_info card_info_eae_arc1 = {
 	.name = "EAE PLX-PCI ARC1",
 	.devcount = 1,
 	.chan_map_tbl = {
-		{ 2, 0x00, 0x08 },
+		{
+			.bar = 2,
+			.offset = 0x00,
+			.size = 0x08,
+		},
 	},
 	.flags = ARC_CAN_10MBIT,
 };
@@ -227,8 +241,15 @@ static struct com20020_pci_card_info card_info_eae_ma1 = {
 	.name = "EAE PLX-PCI MA1",
 	.devcount = 2,
 	.chan_map_tbl = {
-		{ 2, 0x00, 0x08 },
-		{ 2, 0x08, 0x08 }
+		{
+			.bar = 2,
+			.offset = 0x00,
+			.size = 0x08,
+		}, {
+			.bar = 2,
+			.offset = 0x08,
+			.size = 0x08,
+		}
 	},
 	.flags = ARC_CAN_10MBIT,
 };
@@ -404,7 +425,8 @@ static struct pci_driver com20020pci_driver = {
 
 static int __init com20020pci_init(void)
 {
-	BUGLVL(D_NORMAL) printk(VERSION);
+	if (BUGLVL(D_NORMAL))
+		pr_info("%s\n", "COM20020 PCI support");
 	return pci_register_driver(&com20020pci_driver);
 }
 

drivers/net/arcnet/com20020.c

@@ -1,6 +1,6 @@
 /*
  * Linux ARCnet driver - COM20020 chipset support
- * 
+ *
  * Written 1997 by David Woodhouse.
  * Written 1994-1999 by Avery Pennarun.
  * Written 1999 by Martin Mares <mj@ucw.cz>.
@@ -25,6 +25,9 @@
  *
  * **********************
  */
+
+#define pr_fmt(fmt) "arcnet:" KBUILD_MODNAME ": " fmt
+
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
@@ -34,17 +37,16 @@
 #include <linux/netdevice.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
-#include <linux/arcdevice.h>
-#include <linux/com20020.h>
+#include <linux/io.h>
 
-#include <asm/io.h>
+#include "arcdevice.h"
+#include "com20020.h"
 
-#define VERSION "arcnet: COM20020 chipset support (by David Woodhouse et al.)\n"
-
-static char *clockrates[] =
-{"10 Mb/s", "Reserved", "5 Mb/s",
- "2.5 Mb/s", "1.25Mb/s", "625 Kb/s", "312.5 Kb/s",
- "156.25 Kb/s", "Reserved", "Reserved", "Reserved"};
+static const char * const clockrates[] = {
+	"XXXXXXX", "XXXXXXXX", "XXXXXX", "2.5 Mb/s",
+	"1.25Mb/s", "625 Kb/s", "312.5 Kb/s", "156.25 Kb/s",
+	"Reserved", "Reserved", "Reserved"
+};
 
 static void com20020_command(struct net_device *dev, int command);
 static int com20020_status(struct net_device *dev);
@@ -63,35 +65,38 @@ static void com20020_copy_from_card(struct net_device *dev, int bufnum,
 	int ioaddr = dev->base_addr, ofs = 512 * bufnum + offset;
 
 	/* set up the address register */
-	outb((ofs >> 8) | RDDATAflag | AUTOINCflag, _ADDR_HI);
-	outb(ofs & 0xff, _ADDR_LO);
+	arcnet_outb((ofs >> 8) | RDDATAflag | AUTOINCflag,
+		    ioaddr, COM20020_REG_W_ADDR_HI);
+	arcnet_outb(ofs & 0xff, ioaddr, COM20020_REG_W_ADDR_LO);
 
 	/* copy the data */
-	TIME("insb", count, insb(_MEMDATA, buf, count));
+	TIME(dev, "insb", count,
+	     arcnet_insb(ioaddr, COM20020_REG_RW_MEMDATA, buf, count));
 }
 
-
 static void com20020_copy_to_card(struct net_device *dev, int bufnum,
 				  int offset, void *buf, int count)
 {
 	int ioaddr = dev->base_addr, ofs = 512 * bufnum + offset;
 
 	/* set up the address register */
-	outb((ofs >> 8) | AUTOINCflag, _ADDR_HI);
-	outb(ofs & 0xff, _ADDR_LO);
+	arcnet_outb((ofs >> 8) | AUTOINCflag, ioaddr, COM20020_REG_W_ADDR_HI);
+	arcnet_outb(ofs & 0xff, ioaddr, COM20020_REG_W_ADDR_LO);
 
 	/* copy the data */
-	TIME("outsb", count, outsb(_MEMDATA, buf, count));
+	TIME(dev, "outsb", count,
+	     arcnet_outsb(ioaddr, COM20020_REG_RW_MEMDATA, buf, count));
 }
 
-
 /* Reset the card and check some basic stuff during the detection stage. */
 int com20020_check(struct net_device *dev)
 {
 	int ioaddr = dev->base_addr, status;
 	struct arcnet_local *lp = netdev_priv(dev);
 
-	ARCRESET0;
+	arcnet_outb(XTOcfg(3) | RESETcfg, ioaddr, COM20020_REG_W_CONFIG);
+	udelay(5);
+	arcnet_outb(XTOcfg(3), ioaddr, COM20020_REG_W_CONFIG);
 	mdelay(RESETtime);
 
 	lp->setup = lp->clockm ? 0 : (lp->clockp << 1);
@@ -101,49 +106,51 @@ int com20020_check(struct net_device *dev)
 	/* Enable P1Mode for backplane mode */
 	lp->setup = lp->setup | P1MODE;
 
-	SET_SUBADR(SUB_SETUP1);
-	outb(lp->setup, _XREG);
+	com20020_set_subaddress(lp, ioaddr, SUB_SETUP1);
+	arcnet_outb(lp->setup, ioaddr, COM20020_REG_W_XREG);
+
+	if (lp->clockm != 0) {
+		com20020_set_subaddress(lp, ioaddr, SUB_SETUP2);
+		arcnet_outb(lp->setup2, ioaddr, COM20020_REG_W_XREG);
 
-	if (lp->clockm != 0)
-	{
-		SET_SUBADR(SUB_SETUP2);
-		outb(lp->setup2, _XREG);
-	
 		/* must now write the magic "restart operation" command */
 		mdelay(1);
-		outb(0x18, _COMMAND);
+		arcnet_outb(STARTIOcmd, ioaddr, COM20020_REG_W_COMMAND);
 	}
 
-	lp->config = 0x21 | (lp->timeout << 3) | (lp->backplane << 2);
+	lp->config = TXENcfg | (lp->timeout << 3) | (lp->backplane << 2) | SUB_NODE;
 	/* set node ID to 0x42 (but transmitter is disabled, so it's okay) */
-	SETCONF;
-	outb(0x42, ioaddr + BUS_ALIGN*7);
+	arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG);
+	arcnet_outb(0x42, ioaddr, COM20020_REG_W_XREG);
 
-	status = ASTATUS();
+	status = arcnet_inb(ioaddr, COM20020_REG_R_STATUS);
 
 	if ((status & 0x99) != (NORXflag | TXFREEflag | RESETflag)) {
-		BUGMSG(D_NORMAL, "status invalid (%Xh).\n", status);
+		arc_printk(D_NORMAL, dev, "status invalid (%Xh).\n", status);
 		return -ENODEV;
 	}
-	BUGMSG(D_INIT_REASONS, "status after reset: %X\n", status);
+	arc_printk(D_INIT_REASONS, dev, "status after reset: %X\n", status);
 
 	/* Enable TX */
-	outb(0x39, _CONFIG);
-	outb(inb(ioaddr + BUS_ALIGN*8), ioaddr + BUS_ALIGN*7);
+	lp->config |= TXENcfg;
+	arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG);
+	arcnet_outb(arcnet_inb(ioaddr, 8), ioaddr, COM20020_REG_W_XREG);
 
-	ACOMMAND(CFLAGScmd | RESETclear | CONFIGclear);
-
-	status = ASTATUS();
-	BUGMSG(D_INIT_REASONS, "status after reset acknowledged: %X\n",
-	       status);
+	arcnet_outb(CFLAGScmd | RESETclear | CONFIGclear,
+		    ioaddr, COM20020_REG_W_COMMAND);
+	status = arcnet_inb(ioaddr, COM20020_REG_R_STATUS);
+	arc_printk(D_INIT_REASONS, dev, "status after reset acknowledged: %X\n",
+		   status);
 
 	/* Read first location of memory */
-	outb(0 | RDDATAflag | AUTOINCflag, _ADDR_HI);
-	outb(0, _ADDR_LO);
-
-	if ((status = inb(_MEMDATA)) != TESTvalue) {
-		BUGMSG(D_NORMAL, "Signature byte not found (%02Xh != D1h).\n",
-		       status);
+	arcnet_outb(0 | RDDATAflag | AUTOINCflag,
+		    ioaddr, COM20020_REG_W_ADDR_HI);
+	arcnet_outb(0, ioaddr, COM20020_REG_W_ADDR_LO);
+
+	status = arcnet_inb(ioaddr, COM20020_REG_RW_MEMDATA);
+	if (status != TESTvalue) {
+		arc_printk(D_NORMAL, dev, "Signature byte not found (%02Xh != D1h).\n",
+			   status);
 		return -ENODEV;
 	}
 	return 0;
@@ -156,8 +163,8 @@ static int com20020_set_hwaddr(struct net_device *dev, void *addr)
 	struct sockaddr *hwaddr = addr;
 
 	memcpy(dev->dev_addr, hwaddr->sa_data, 1);
-	SET_SUBADR(SUB_NODE);
-	outb(dev->dev_addr[0], _XREG);
+	com20020_set_subaddress(lp, ioaddr, SUB_NODE);
+	arcnet_outb(dev->dev_addr[0], ioaddr, COM20020_REG_W_XREG);
 
 	return 0;
 }
@@ -192,48 +199,54 @@ int com20020_found(struct net_device *dev, int shared)
 	lp->hw.copy_from_card = com20020_copy_from_card;
 	lp->hw.close = com20020_close;
 
+	/* FIXME: do this some other way! */
 	if (!dev->dev_addr[0])
-		dev->dev_addr[0] = inb(ioaddr + BUS_ALIGN*8);	/* FIXME: do this some other way! */
+		dev->dev_addr[0] = arcnet_inb(ioaddr, 8);
 
-	SET_SUBADR(SUB_SETUP1);
-	outb(lp->setup, _XREG);
+	com20020_set_subaddress(lp, ioaddr, SUB_SETUP1);
+	arcnet_outb(lp->setup, ioaddr, COM20020_REG_W_XREG);
+
+	if (lp->card_flags & ARC_CAN_10MBIT) {
+		com20020_set_subaddress(lp, ioaddr, SUB_SETUP2);
+		arcnet_outb(lp->setup2, ioaddr, COM20020_REG_W_XREG);
 
-	if (lp->card_flags & ARC_CAN_10MBIT)
-	{
-		SET_SUBADR(SUB_SETUP2);
-		outb(lp->setup2, _XREG);
-	
 		/* must now write the magic "restart operation" command */
 		mdelay(1);
-		outb(0x18, _COMMAND);
+		arcnet_outb(STARTIOcmd, ioaddr, COM20020_REG_W_COMMAND);
 	}
 
-	lp->config = 0x20 | (lp->timeout << 3) | (lp->backplane << 2) | 1;
+	lp->config = TXENcfg | (lp->timeout << 3) | (lp->backplane << 2) | SUB_NODE;
 	/* Default 0x38 + register: Node ID */
-	SETCONF;
-	outb(dev->dev_addr[0], _XREG);
+	arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG);
+	arcnet_outb(dev->dev_addr[0], ioaddr, COM20020_REG_W_XREG);
 
 	/* reserve the irq */
 	if (request_irq(dev->irq, arcnet_interrupt, shared,
 			"arcnet (COM20020)", dev)) {
-		BUGMSG(D_NORMAL, "Can't get IRQ %d!\n", dev->irq);
+		arc_printk(D_NORMAL, dev, "Can't get IRQ %d!\n", dev->irq);
 		return -ENODEV;
 	}
 
 	dev->base_addr = ioaddr;
 
-	BUGMSG(D_NORMAL, "%s: station %02Xh found at %03lXh, IRQ %d.\n",
-	       lp->card_name, dev->dev_addr[0], dev->base_addr, dev->irq);
+	arc_printk(D_NORMAL, dev, "%s: station %02Xh found at %03lXh, IRQ %d.\n",
+		   lp->card_name, dev->dev_addr[0], dev->base_addr, dev->irq);
 
 	if (lp->backplane)
-		BUGMSG(D_NORMAL, "Using backplane mode.\n");
+		arc_printk(D_NORMAL, dev, "Using backplane mode.\n");
 
 	if (lp->timeout != 3)
-		BUGMSG(D_NORMAL, "Using extended timeout value of %d.\n", lp->timeout);
-
-	BUGMSG(D_NORMAL, "Using CKP %d - data rate %s.\n",
-	       lp->setup >> 1, 
-	       clockrates[3 - ((lp->setup2 & 0xF0) >> 4) + ((lp->setup & 0x0F) >> 1)]);
+		arc_printk(D_NORMAL, dev, "Using extended timeout value of %d\n",
+			   lp->timeout);
+
+	arc_printk(D_NORMAL, dev, "Using CKP %d - data rate %s\n",
+		   lp->setup >> 1,
+		   clockrates[3 -
+			      ((lp->setup2 & 0xF0) >> 4) +
+			      ((lp->setup & 0x0F) >> 1)]);
+			/* The clockrates array index looks very fragile.
+			 * It seems like it could have negative indexing.
+			 */
 
 	if (register_netdev(dev)) {
 		free_irq(dev->irq, dev);
@@ -242,10 +255,8 @@ int com20020_found(struct net_device *dev, int shared)
 	return 0;
 }
 
-
-/* 
- * Do a hardware reset on the card, and set up necessary registers.
- * 
+/* Do a hardware reset on the card, and set up necessary registers.
+ *
  * This should be called as little as possible, because it disrupts the
  * token on the network (causes a RECON) and requires a significant delay.
  *
@@ -257,65 +268,71 @@ static int com20020_reset(struct net_device *dev, int really_reset)
 	u_int ioaddr = dev->base_addr;
 	u_char inbyte;
 
-	BUGMSG(D_DEBUG, "%s: %d: %s: dev: %p, lp: %p, dev->name: %s\n",
-		__FILE__,__LINE__,__func__,dev,lp,dev->name);
-	BUGMSG(D_INIT, "Resetting %s (status=%02Xh)\n",
-	       dev->name, ASTATUS());
+	arc_printk(D_DEBUG, dev, "%s: %d: %s: dev: %p, lp: %p, dev->name: %s\n",
+		   __FILE__, __LINE__, __func__, dev, lp, dev->name);
+	arc_printk(D_INIT, dev, "Resetting %s (status=%02Xh)\n",
+		   dev->name, arcnet_inb(ioaddr, COM20020_REG_R_STATUS));
 
-	BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
+	arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__);
 	lp->config = TXENcfg | (lp->timeout << 3) | (lp->backplane << 2);
 	/* power-up defaults */
-	SETCONF;
-	BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
+	arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG);
+	arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__);
 
 	if (really_reset) {
 		/* reset the card */
-		ARCRESET;
-		mdelay(RESETtime * 2);	/* COM20020 seems to be slower sometimes */
+		arcnet_outb(lp->config | RESETcfg, ioaddr, COM20020_REG_W_CONFIG);
+		udelay(5);
+		arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG);
+		mdelay(RESETtime * 2);
+				/* COM20020 seems to be slower sometimes */
 	}
 	/* clear flags & end reset */
-	BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
-	ACOMMAND(CFLAGScmd | RESETclear | CONFIGclear);
+	arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__);
+	arcnet_outb(CFLAGScmd | RESETclear | CONFIGclear,
+		    ioaddr, COM20020_REG_W_COMMAND);
 
 	/* verify that the ARCnet signature byte is present */
-	BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
+	arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__);
 
 	com20020_copy_from_card(dev, 0, 0, &inbyte, 1);
-	BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
+	arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__);
 	if (inbyte != TESTvalue) {
-		BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
-		BUGMSG(D_NORMAL, "reset failed: TESTvalue not present.\n");
+		arc_printk(D_DEBUG, dev, "%s: %d: %s\n",
+			   __FILE__, __LINE__, __func__);
+		arc_printk(D_NORMAL, dev, "reset failed: TESTvalue not present.\n");
 		return 1;
 	}
 	/* enable extended (512-byte) packets */
-	ACOMMAND(CONFIGcmd | EXTconf);
-	BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
+	arcnet_outb(CONFIGcmd | EXTconf, ioaddr, COM20020_REG_W_COMMAND);
+
+	arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__);
 
 	/* done!  return success. */
 	return 0;
 }
 
-
 static void com20020_setmask(struct net_device *dev, int mask)
 {
 	u_int ioaddr = dev->base_addr;
-	BUGMSG(D_DURING, "Setting mask to %x at %x\n",mask,ioaddr);
-	AINTMASK(mask);
-}
 
+	arc_printk(D_DURING, dev, "Setting mask to %x at %x\n", mask, ioaddr);
+	arcnet_outb(mask, ioaddr, COM20020_REG_W_INTMASK);
+}
 
 static void com20020_command(struct net_device *dev, int cmd)
 {
 	u_int ioaddr = dev->base_addr;
-	ACOMMAND(cmd);
-}
 
+	arcnet_outb(cmd, ioaddr, COM20020_REG_W_COMMAND);
+}
 
 static int com20020_status(struct net_device *dev)
 {
 	u_int ioaddr = dev->base_addr;
 
-	return ASTATUS() + (ADIAGSTATUS()<<8);
+	return arcnet_inb(ioaddr, COM20020_REG_R_STATUS) +
+		(arcnet_inb(ioaddr, COM20020_REG_R_DIAGSTAT) << 8);
 }
 
 static void com20020_close(struct net_device *dev)
@@ -325,7 +342,7 @@ static void com20020_close(struct net_device *dev)
 
 	/* disable transmitter */
 	lp->config &= ~TXENcfg;
-	SETCONF;
+	arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG);
 }
 
 /* Set or clear the multicast filter for this adaptor.
@@ -340,20 +357,20 @@ static void com20020_set_mc_list(struct net_device *dev)
 	struct arcnet_local *lp = netdev_priv(dev);
 	int ioaddr = dev->base_addr;
 
-	if ((dev->flags & IFF_PROMISC) && (dev->flags & IFF_UP)) {	/* Enable promiscuous mode */
+	if ((dev->flags & IFF_PROMISC) && (dev->flags & IFF_UP)) {
+		/* Enable promiscuous mode */
 		if (!(lp->setup & PROMISCset))
-			BUGMSG(D_NORMAL, "Setting promiscuous flag...\n");
-		SET_SUBADR(SUB_SETUP1);
+			arc_printk(D_NORMAL, dev, "Setting promiscuous flag...\n");
+		com20020_set_subaddress(lp, ioaddr, SUB_SETUP1);
 		lp->setup |= PROMISCset;
-		outb(lp->setup, _XREG);
-	} else
+		arcnet_outb(lp->setup, ioaddr, COM20020_REG_W_XREG);
+	} else {
 		/* Disable promiscuous mode, use normal mode */
-	{
 		if ((lp->setup & PROMISCset))
-			BUGMSG(D_NORMAL, "Resetting promiscuous flag...\n");
-		SET_SUBADR(SUB_SETUP1);
+			arc_printk(D_NORMAL, dev, "Resetting promiscuous flag...\n");
+		com20020_set_subaddress(lp, ioaddr, SUB_SETUP1);
 		lp->setup &= ~PROMISCset;
-		outb(lp->setup, _XREG);
+		arcnet_outb(lp->setup, ioaddr, COM20020_REG_W_XREG);
 	}
 }
 
@@ -371,7 +388,8 @@ MODULE_LICENSE("GPL");
 
 static int __init com20020_module_init(void)
 {
-	BUGLVL(D_NORMAL) printk(VERSION);
+	if (BUGLVL(D_NORMAL))
+		pr_info("%s\n", "COM20020 chipset support (by David Woodhouse et al.)");
 	return 0;
 }
 

include/linux/com20020.h → drivers/net/arcnet/com20020.h

@@ -1,6 +1,6 @@
 /*
  * Linux ARCnet driver - COM20020 chipset support - function declarations
- * 
+ *
  * Written 1997 by David Woodhouse.
  * Written 1994-1999 by Avery Pennarun.
  * Derived from skeleton.c by Donald Becker.
@@ -34,13 +34,6 @@ extern const struct net_device_ops com20020_netdev_ops;
 /* The number of low I/O ports used by the card. */
 #define ARCNET_TOTAL_SIZE 8
 
-/* various register addresses */
-#ifdef CONFIG_SA1100_CT6001
-#define BUS_ALIGN  2  /* 8 bit device on a 16 bit bus - needs padding */
-#else
-#define BUS_ALIGN  1
-#endif
-
 #define PLX_PCI_MAX_CARDS 2
 
 struct com20020_pci_channel_map {
@@ -71,17 +64,18 @@ struct com20020_dev {
 	int index;
 };
 
-#define _INTMASK  (ioaddr+BUS_ALIGN*0)	/* writable */
-#define _STATUS   (ioaddr+BUS_ALIGN*0)	/* readable */
-#define _COMMAND  (ioaddr+BUS_ALIGN*1)	/* standard arcnet commands */
-#define _DIAGSTAT (ioaddr+BUS_ALIGN*1)	/* diagnostic status register */
-#define _ADDR_HI  (ioaddr+BUS_ALIGN*2)	/* control registers for IO-mapped memory */
-#define _ADDR_LO  (ioaddr+BUS_ALIGN*3)
-#define _MEMDATA  (ioaddr+BUS_ALIGN*4)	/* data port for IO-mapped memory */
-#define _SUBADR   (ioaddr+BUS_ALIGN*5)	/* the extended port _XREG refers to */
-#define _CONFIG   (ioaddr+BUS_ALIGN*6)	/* configuration register */
-#define _XREG     (ioaddr+BUS_ALIGN*7)	/* extra registers (indexed by _CONFIG
-  					or _SUBADR) */
+#define COM20020_REG_W_INTMASK	0	/* writable */
+#define COM20020_REG_R_STATUS	0	/* readable */
+#define COM20020_REG_W_COMMAND	1	/* standard arcnet commands */
+#define COM20020_REG_R_DIAGSTAT	1	/* diagnostic status */
+#define COM20020_REG_W_ADDR_HI	2	/* control for IO-mapped memory */
+#define COM20020_REG_W_ADDR_LO	3
+#define COM20020_REG_RW_MEMDATA	4	/* data port for IO-mapped memory */
+#define COM20020_REG_W_SUBADR	5	/* the extended port _XREG refers to */
+#define COM20020_REG_W_CONFIG	6	/* configuration */
+#define COM20020_REG_W_XREG	7	/* extra
+					 * (indexed by _CONFIG or _SUBADDR)
+					 */
 
 /* in the ADDR_HI register */
 #define RDDATAflag	0x80	/* next access is a read (not a write) */
@@ -92,6 +86,7 @@ struct com20020_dev {
 /* in the CONFIG register */
 #define RESETcfg	0x80	/* put card in reset state */
 #define TXENcfg		0x20	/* enable TX */
+#define XTOcfg(x)	((x) << 3)	/* extended timeout */
 
 /* in SETUP register */
 #define PROMISCset	0x10	/* enable RCV_ALL */
@@ -109,37 +104,15 @@ struct com20020_dev {
 #define SUB_BUSCTL	5	/* bus control options */
 #define SUB_DMACOUNT	6	/* DMA count options */
 
-#define SET_SUBADR(x) do { \
-	if ((x) < 4) \
-	{ \
-		lp->config = (lp->config & ~0x03) | (x); \
-		SETCONF; \
-	} \
-	else \
-	{ \
-		outb(x, _SUBADR); \
-	} \
-} while (0)
-
-#undef ARCRESET
-#undef ASTATUS
-#undef ACOMMAND
-#undef AINTMASK
-
-#define ARCRESET { outb(lp->config | 0x80, _CONFIG); \
-		    udelay(5);                        \
-		    outb(lp->config , _CONFIG);       \
-                  }
-#define ARCRESET0 { outb(0x18 | 0x80, _CONFIG);   \
-		    udelay(5);                       \
-		    outb(0x18 , _CONFIG);            \
-                  }
-
-#define ASTATUS()	inb(_STATUS)
-#define ADIAGSTATUS()	inb(_DIAGSTAT)
-#define ACOMMAND(cmd)	outb((cmd),_COMMAND)
-#define AINTMASK(msk)	outb((msk),_INTMASK)
-
-#define SETCONF		outb(lp->config, _CONFIG)
+static inline void com20020_set_subaddress(struct arcnet_local *lp,
+					   int ioaddr, int val)
+{
+	if (val < 4) {
+		lp->config = (lp->config & ~0x03) | val;
+		arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG);
+	} else {
+		arcnet_outb(val, ioaddr, COM20020_REG_W_SUBADR);
+	}
+}
 
 #endif /* __COM20020_H */

drivers/net/arcnet/com20020_cs.c

@@ -1,6 +1,6 @@
 /*
  * Linux ARCnet driver - COM20020 PCMCIA support
- * 
+ *
  * Written 1994-1999 by Avery Pennarun,
  *    based on an ISA version by David Woodhouse.
  * Derived from ibmtr_cs.c by Steve Kipisz (pcmcia-cs 3.1.4)
@@ -19,18 +19,21 @@
  * Director, National Security Agency.  This software may only be used
  * and distributed according to the terms of the GNU General Public License as
  * modified by SRC, incorporated herein by reference.
- * 
+ *
  * **********************
  * Changes:
  * Arnaldo Carvalho de Melo <acme@conectiva.com.br> - 08/08/2000
  * - reorganize kmallocs in com20020_attach, checking all for failure
  *   and releasing the previous allocations if one fails
  * **********************
- * 
+ *
  * For more details, see drivers/net/arcnet.c
  *
  * **********************
  */
+
+#define pr_fmt(fmt) "arcnet:" KBUILD_MODNAME ": " fmt
+
 #include <linux/kernel.h>
 #include <linux/ptrace.h>
 #include <linux/slab.h>
@@ -39,51 +42,44 @@
 #include <linux/delay.h>
 #include <linux/module.h>
 #include <linux/netdevice.h>
-#include <linux/arcdevice.h>
-#include <linux/com20020.h>
-
+#include <linux/io.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ds.h>
 
-#include <asm/io.h>
-
-#define VERSION "arcnet: COM20020 PCMCIA support loaded.\n"
-
+#include "arcdevice.h"
+#include "com20020.h"
 
 static void regdump(struct net_device *dev)
 {
 #ifdef DEBUG
-    int ioaddr = dev->base_addr;
-    int count;
-    
-    netdev_dbg(dev, "register dump:\n");
-    for (count = ioaddr; count < ioaddr + 16; count++)
-    {
-	if (!(count % 16))
-	    pr_cont("%04X:", count);
-	pr_cont(" %02X", inb(count));
-    }
-    pr_cont("\n");
-    
-    netdev_dbg(dev, "buffer0 dump:\n");
+	int ioaddr = dev->base_addr;
+	int count;
+
+	netdev_dbg(dev, "register dump:\n");
+	for (count = 0; count < 16; count++) {
+		if (!(count % 16))
+			pr_cont("%04X:", ioaddr + count);
+		pr_cont(" %02X", arcnet_inb(ioaddr, count));
+	}
+	pr_cont("\n");
+
+	netdev_dbg(dev, "buffer0 dump:\n");
 	/* set up the address register */
-        count = 0;
-	outb((count >> 8) | RDDATAflag | AUTOINCflag, _ADDR_HI);
-	outb(count & 0xff, _ADDR_LO);
-    
-    for (count = 0; count < 256+32; count++)
-    {
-	if (!(count % 16))
-	    pr_cont("%04X:", count);
-	
-	/* copy the data */
-	pr_cont(" %02X", inb(_MEMDATA));
-    }
-    pr_cont("\n");
-#endif
-}
+	count = 0;
+	arcnet_outb((count >> 8) | RDDATAflag | AUTOINCflag,
+		    ioaddr, com20020_REG_W_ADDR_HI);
+	arcnet_outb(count & 0xff, ioaddr, COM20020_REG_W_ADDR_LO);
 
+	for (count = 0; count < 256 + 32; count++) {
+		if (!(count % 16))
+			pr_cont("%04X:", count);
 
+		/* copy the data */
+		pr_cont(" %02X", arcnet_inb(ioaddr, COM20020_REG_RW_MEMDATA));
+	}
+	pr_cont("\n");
+#endif
+}
 
 /*====================================================================*/
 
@@ -114,169 +110,161 @@ static void com20020_detach(struct pcmcia_device *p_dev);
 
 static int com20020_probe(struct pcmcia_device *p_dev)
 {
-    struct com20020_dev *info;
-    struct net_device *dev;
-    struct arcnet_local *lp;
+	struct com20020_dev *info;
+	struct net_device *dev;
+	struct arcnet_local *lp;
 
-    dev_dbg(&p_dev->dev, "com20020_attach()\n");
+	dev_dbg(&p_dev->dev, "com20020_attach()\n");
 
-    /* Create new network device */
-    info = kzalloc(sizeof(*info), GFP_KERNEL);
-    if (!info)
-	goto fail_alloc_info;
+	/* Create new network device */
+	info = kzalloc(sizeof(*info), GFP_KERNEL);
+	if (!info)
+		goto fail_alloc_info;
 
-    dev = alloc_arcdev("");
-    if (!dev)
-	goto fail_alloc_dev;
+	dev = alloc_arcdev("");
+	if (!dev)
+		goto fail_alloc_dev;
 
-    lp = netdev_priv(dev);
-    lp->timeout = timeout;
-    lp->backplane = backplane;
-    lp->clockp = clockp;
-    lp->clockm = clockm & 3;
-    lp->hw.owner = THIS_MODULE;
+	lp = netdev_priv(dev);
+	lp->timeout = timeout;
+	lp->backplane = backplane;
+	lp->clockp = clockp;
+	lp->clockm = clockm & 3;
+	lp->hw.owner = THIS_MODULE;
 
-    /* fill in our module parameters as defaults */
-    dev->dev_addr[0] = node;
+	/* fill in our module parameters as defaults */
+	dev->dev_addr[0] = node;
 
-    p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
-    p_dev->resource[0]->end = 16;
-    p_dev->config_flags |= CONF_ENABLE_IRQ;
+	p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+	p_dev->resource[0]->end = 16;
+	p_dev->config_flags |= CONF_ENABLE_IRQ;
 
-    info->dev = dev;
-    p_dev->priv = info;
+	info->dev = dev;
+	p_dev->priv = info;
 
-    return com20020_config(p_dev);
+	return com20020_config(p_dev);
 
 fail_alloc_dev:
-    kfree(info);
+	kfree(info);
 fail_alloc_info:
-    return -ENOMEM;
+	return -ENOMEM;
 } /* com20020_attach */
 
 static void com20020_detach(struct pcmcia_device *link)
 {
-    struct com20020_dev *info = link->priv;
-    struct net_device *dev = info->dev;
+	struct com20020_dev *info = link->priv;
+	struct net_device *dev = info->dev;
 
-    dev_dbg(&link->dev, "detach...\n");
+	dev_dbg(&link->dev, "detach...\n");
 
-    dev_dbg(&link->dev, "com20020_detach\n");
+	dev_dbg(&link->dev, "com20020_detach\n");
 
-    dev_dbg(&link->dev, "unregister...\n");
+	dev_dbg(&link->dev, "unregister...\n");
 
-    unregister_netdev(dev);
+	unregister_netdev(dev);
 
-    /*
-     * this is necessary because we register our IRQ separately
-     * from card services.
-     */
-    if (dev->irq)
-	    free_irq(dev->irq, dev);
+	/* this is necessary because we register our IRQ separately
+	 * from card services.
+	 */
+	if (dev->irq)
+		free_irq(dev->irq, dev);
 
-    com20020_release(link);
+	com20020_release(link);
 
-    /* Unlink device structure, free bits */
-    dev_dbg(&link->dev, "unlinking...\n");
-    if (link->priv)
-    {
-	dev = info->dev;
-	if (dev)
-	{
-	    dev_dbg(&link->dev, "kfree...\n");
-	    free_netdev(dev);
+	/* Unlink device structure, free bits */
+	dev_dbg(&link->dev, "unlinking...\n");
+	if (link->priv) {
+		dev = info->dev;
+		if (dev) {
+			dev_dbg(&link->dev, "kfree...\n");
+			free_netdev(dev);
+		}
+		dev_dbg(&link->dev, "kfree2...\n");
+		kfree(info);
 	}
-	dev_dbg(&link->dev, "kfree2...\n");
-	kfree(info);
-    }
 
 } /* com20020_detach */
 
 static int com20020_config(struct pcmcia_device *link)
 {
-    struct arcnet_local *lp;
-    struct com20020_dev *info;
-    struct net_device *dev;
-    int i, ret;
-    int ioaddr;
+	struct arcnet_local *lp;
+	struct com20020_dev *info;
+	struct net_device *dev;
+	int i, ret;
+	int ioaddr;
+
+	info = link->priv;
+	dev = info->dev;
+
+	dev_dbg(&link->dev, "config...\n");
+
+	dev_dbg(&link->dev, "com20020_config\n");
 
-    info = link->priv;
-    dev = info->dev;
+	dev_dbg(&link->dev, "baseport1 is %Xh\n",
+		(unsigned int)link->resource[0]->start);
 
-    dev_dbg(&link->dev, "config...\n");
+	i = -ENODEV;
+	link->io_lines = 16;
 
-    dev_dbg(&link->dev, "com20020_config\n");
+	if (!link->resource[0]->start) {
+		for (ioaddr = 0x100; ioaddr < 0x400; ioaddr += 0x10) {
+			link->resource[0]->start = ioaddr;
+			i = pcmcia_request_io(link);
+			if (i == 0)
+				break;
+		}
+	} else {
+		i = pcmcia_request_io(link);
+	}
 
-    dev_dbg(&link->dev, "baseport1 is %Xh\n",
-	    (unsigned int) link->resource[0]->start);
+	if (i != 0) {
+		dev_dbg(&link->dev, "requestIO failed totally!\n");
+		goto failed;
+	}
 
-    i = -ENODEV;
-    link->io_lines = 16;
+	ioaddr = dev->base_addr = link->resource[0]->start;
+	dev_dbg(&link->dev, "got ioaddr %Xh\n", ioaddr);
 
-    if (!link->resource[0]->start)
-    {
-	for (ioaddr = 0x100; ioaddr < 0x400; ioaddr += 0x10)
-	{
-	    link->resource[0]->start = ioaddr;
-	    i = pcmcia_request_io(link);
-	    if (i == 0)
-		break;
+	dev_dbg(&link->dev, "request IRQ %d\n",
+		link->irq);
+	if (!link->irq) {
+		dev_dbg(&link->dev, "requestIRQ failed totally!\n");
+		goto failed;
 	}
-    }
-    else
-	i = pcmcia_request_io(link);
-    
-    if (i != 0)
-    {
-	dev_dbg(&link->dev, "requestIO failed totally!\n");
-	goto failed;
-    }
-	
-    ioaddr = dev->base_addr = link->resource[0]->start;
-    dev_dbg(&link->dev, "got ioaddr %Xh\n", ioaddr);
-
-    dev_dbg(&link->dev, "request IRQ %d\n",
-	    link->irq);
-    if (!link->irq)
-    {
-	dev_dbg(&link->dev, "requestIRQ failed totally!\n");
-	goto failed;
-    }
-
-    dev->irq = link->irq;
-
-    ret = pcmcia_enable_device(link);
-    if (ret)
-	    goto failed;
-
-    if (com20020_check(dev))
-    {
-	regdump(dev);
-	goto failed;
-    }
-    
-    lp = netdev_priv(dev);
-    lp->card_name = "PCMCIA COM20020";
-    lp->card_flags = ARC_CAN_10MBIT; /* pretend all of them can 10Mbit */
-
-    SET_NETDEV_DEV(dev, &link->dev);
-
-    i = com20020_found(dev, 0);	/* calls register_netdev */
-    
-    if (i != 0) {
-	dev_notice(&link->dev,
-		   "com20020_found() failed\n");
-	goto failed;
-    }
-
-    netdev_dbg(dev, "port %#3lx, irq %d\n",
-	       dev->base_addr, dev->irq);
-    return 0;
+
+	dev->irq = link->irq;
+
+	ret = pcmcia_enable_device(link);
+	if (ret)
+		goto failed;
+
+	if (com20020_check(dev)) {
+		regdump(dev);
+		goto failed;
+	}
+
+	lp = netdev_priv(dev);
+	lp->card_name = "PCMCIA COM20020";
+	lp->card_flags = ARC_CAN_10MBIT; /* pretend all of them can 10Mbit */
+
+	SET_NETDEV_DEV(dev, &link->dev);
+
+	i = com20020_found(dev, 0);	/* calls register_netdev */
+
+	if (i != 0) {
+		dev_notice(&link->dev,
+			   "com20020_found() failed\n");
+		goto failed;
+	}
+
+	netdev_dbg(dev, "port %#3lx, irq %d\n",
+		   dev->base_addr, dev->irq);
+	return 0;
 
 failed:
-    dev_dbg(&link->dev, "com20020_config failed...\n");
-    com20020_release(link);
-    return -ENODEV;
+	dev_dbg(&link->dev, "com20020_config failed...\n");
+	com20020_release(link);
+	return -ENODEV;
 } /* com20020_config */
 
 static void com20020_release(struct pcmcia_device *link)
@@ -304,7 +292,10 @@ static int com20020_resume(struct pcmcia_device *link)
 	if (link->open) {
 		int ioaddr = dev->base_addr;
 		struct arcnet_local *lp = netdev_priv(dev);
-		ARCRESET;
+
+		arcnet_outb(lp->config | 0x80, ioaddr, COM20020_REG_W_CONFIG);
+		udelay(5);
+		arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG);
 	}
 
 	return 0;
@@ -312,9 +303,9 @@ static int com20020_resume(struct pcmcia_device *link)
 
 static const struct pcmcia_device_id com20020_ids[] = {
 	PCMCIA_DEVICE_PROD_ID12("Contemporary Control Systems, Inc.",
-			"PCM20 Arcnet Adapter", 0x59991666, 0x95dfffaf),
+				"PCM20 Arcnet Adapter", 0x59991666, 0x95dfffaf),
 	PCMCIA_DEVICE_PROD_ID12("SoHard AG",
-			"SH ARC PCMCIA", 0xf8991729, 0x69dff0c7),
+				"SH ARC PCMCIA", 0xf8991729, 0x69dff0c7),
 	PCMCIA_DEVICE_NULL
 };
 MODULE_DEVICE_TABLE(pcmcia, com20020_ids);

drivers/net/arcnet/com9026.h

@@ -0,0 +1,17 @@
+#ifndef __COM9026_H
+#define __COM9026_H
+
+/* COM 9026 controller chip --> ARCnet register addresses */
+
+#define COM9026_REG_W_INTMASK	0	/* writable */
+#define COM9026_REG_R_STATUS	0	/* readable */
+#define COM9026_REG_W_COMMAND	1	/* writable, returns random vals on read (?) */
+#define COM9026_REG_RW_CONFIG	2	/* Configuration register */
+#define COM9026_REG_R_RESET	8	/* software reset (on read) */
+#define COM9026_REG_RW_MEMDATA	12	/* Data port for IO-mapped memory */
+#define COM9026_REG_W_ADDR_LO	14	/* Control registers for said */
+#define COM9026_REG_W_ADDR_HI	15
+
+#define COM9026_REG_R_STATION	1	/* Station ID */
+
+#endif

drivers/net/arcnet/com90io.c

@@ -1,6 +1,6 @@
 /*
  * Linux ARCnet driver - COM90xx chipset (IO-mapped buffers)
- * 
+ *
  * Written 1997 by David Woodhouse.
  * Written 1994-1999 by Avery Pennarun.
  * Written 1999-2000 by Martin Mares <mj@ucw.cz>.
@@ -25,6 +25,9 @@
  *
  * **********************
  */
+
+#define pr_fmt(fmt) "arcnet:" KBUILD_MODNAME ": " fmt
+
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
@@ -34,12 +37,10 @@
 #include <linux/bootmem.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
-#include <asm/io.h>
-#include <linux/arcdevice.h>
-
-
-#define VERSION "arcnet: COM90xx IO-mapped mode support (by David Woodhouse et el.)\n"
+#include <linux/io.h>
 
+#include "arcdevice.h"
+#include "com9026.h"
 
 /* Internal function declarations */
 
@@ -50,35 +51,14 @@ static void com90io_setmask(struct net_device *dev, int mask);
 static int com90io_reset(struct net_device *dev, int really_reset);
 static void com90io_copy_to_card(struct net_device *dev, int bufnum, int offset,
 				 void *buf, int count);
-static void com90io_copy_from_card(struct net_device *dev, int bufnum, int offset,
-				   void *buf, int count);
-
+static void com90io_copy_from_card(struct net_device *dev, int bufnum,
+				   int offset, void *buf, int count);
 
 /* Handy defines for ARCnet specific stuff */
 
 /* The number of low I/O ports used by the card. */
 #define ARCNET_TOTAL_SIZE 16
 
-/* COM 9026 controller chip --> ARCnet register addresses */
-#define _INTMASK (ioaddr+0)	/* writable */
-#define _STATUS  (ioaddr+0)	/* readable */
-#define _COMMAND (ioaddr+1)	/* writable, returns random vals on read (?) */
-#define _RESET  (ioaddr+8)	/* software reset (on read) */
-#define _MEMDATA  (ioaddr+12)	/* Data port for IO-mapped memory */
-#define _ADDR_HI  (ioaddr+15)	/* Control registers for said */
-#define _ADDR_LO  (ioaddr+14)
-#define _CONFIG  (ioaddr+2)	/* Configuration register */
-
-#undef ASTATUS
-#undef ACOMMAND
-#undef AINTMASK
-
-#define ASTATUS()	inb(_STATUS)
-#define ACOMMAND(cmd) outb((cmd),_COMMAND)
-#define AINTMASK(msk)	outb((msk),_INTMASK)
-#define SETCONF() 	outb((lp->config),_CONFIG)
-
-
 /****************************************************************************
  *                                                                          *
  * IO-mapped operation routines                                             *
@@ -92,58 +72,59 @@ static u_char get_buffer_byte(struct net_device *dev, unsigned offset)
 {
 	int ioaddr = dev->base_addr;
 
-	outb(offset >> 8, _ADDR_HI);
-	outb(offset & 0xff, _ADDR_LO);
+	arcnet_outb(offset >> 8, ioaddr, COM9026_REG_W_ADDR_HI);
+	arcnet_outb(offset & 0xff, ioaddr, COM9026_REG_W_ADDR_LO);
 
-	return inb(_MEMDATA);
+	return arcnet_inb(ioaddr, COM9026_REG_RW_MEMDATA);
 }
 
 #ifdef ONE_AT_A_TIME_TX
-static void put_buffer_byte(struct net_device *dev, unsigned offset, u_char datum)
+static void put_buffer_byte(struct net_device *dev, unsigned offset,
+			    u_char datum)
 {
 	int ioaddr = dev->base_addr;
 
-	outb(offset >> 8, _ADDR_HI);
-	outb(offset & 0xff, _ADDR_LO);
+	arcnet_outb(offset >> 8, ioaddr, COM9026_REG_W_ADDR_HI);
+	arcnet_outb(offset & 0xff, ioaddr, COM9026_REG_W_ADDR_LO);
 
-	outb(datum, _MEMDATA);
+	arcnet_outb(datum, ioaddr, COM9026_REG_RW_MEMDATA);
 }
 
 #endif
 
-
-static void get_whole_buffer(struct net_device *dev, unsigned offset, unsigned length, char *dest)
+static void get_whole_buffer(struct net_device *dev, unsigned offset,
+			     unsigned length, char *dest)
 {
 	int ioaddr = dev->base_addr;
 
-	outb((offset >> 8) | AUTOINCflag, _ADDR_HI);
-	outb(offset & 0xff, _ADDR_LO);
+	arcnet_outb((offset >> 8) | AUTOINCflag, ioaddr, COM9026_REG_W_ADDR_HI);
+	arcnet_outb(offset & 0xff, ioaddr, COM9026_REG_W_ADDR_LO);
 
 	while (length--)
 #ifdef ONE_AT_A_TIME_RX
 		*(dest++) = get_buffer_byte(dev, offset++);
 #else
-		*(dest++) = inb(_MEMDATA);
+		*(dest++) = arcnet_inb(ioaddr, COM9026_REG_RW_MEMDATA);
 #endif
 }
 
-static void put_whole_buffer(struct net_device *dev, unsigned offset, unsigned length, char *dest)
+static void put_whole_buffer(struct net_device *dev, unsigned offset,
+			     unsigned length, char *dest)
 {
 	int ioaddr = dev->base_addr;
 
-	outb((offset >> 8) | AUTOINCflag, _ADDR_HI);
-	outb(offset & 0xff, _ADDR_LO);
+	arcnet_outb((offset >> 8) | AUTOINCflag, ioaddr, COM9026_REG_W_ADDR_HI);
+	arcnet_outb(offset & 0xff, ioaddr,COM9026_REG_W_ADDR_LO);
 
 	while (length--)
 #ifdef ONE_AT_A_TIME_TX
 		put_buffer_byte(dev, offset++, *(dest++));
 #else
-		outb(*(dest++), _MEMDATA);
+		arcnet_outb(*(dest++), ioaddr, COM9026_REG_RW_MEMDATA);
 #endif
 }
 
-/*
- * We cannot probe for an IO mapped card either, although we can check that
+/* We cannot probe for an IO mapped card either, although we can check that
  * it's where we were told it was, and even autoirq
  */
 static int __init com90io_probe(struct net_device *dev)
@@ -151,71 +132,78 @@ static int __init com90io_probe(struct net_device *dev)
 	int ioaddr = dev->base_addr, status;
 	unsigned long airqmask;
 
-	BUGLVL(D_NORMAL) printk(VERSION);
-	BUGLVL(D_NORMAL) printk("E-mail me if you actually test this driver, please!\n");
+	if (BUGLVL(D_NORMAL)) {
+		pr_info("%s\n", "COM90xx IO-mapped mode support (by David Woodhouse et el.)");
+		pr_info("E-mail me if you actually test this driver, please!\n");
+	}
 
 	if (!ioaddr) {
-		BUGMSG(D_NORMAL, "No autoprobe for IO mapped cards; you "
-		       "must specify the base address!\n");
+		arc_printk(D_NORMAL, dev, "No autoprobe for IO mapped cards; you must specify the base address!\n");
 		return -ENODEV;
 	}
 	if (!request_region(ioaddr, ARCNET_TOTAL_SIZE, "com90io probe")) {
-		BUGMSG(D_INIT_REASONS, "IO request_region %x-%x failed.\n",
-		       ioaddr, ioaddr + ARCNET_TOTAL_SIZE - 1);
+		arc_printk(D_INIT_REASONS, dev, "IO request_region %x-%x failed\n",
+			   ioaddr, ioaddr + ARCNET_TOTAL_SIZE - 1);
 		return -ENXIO;
 	}
-	if (ASTATUS() == 0xFF) {
-		BUGMSG(D_INIT_REASONS, "IO address %x empty\n", ioaddr);
+	if (arcnet_inb(ioaddr, COM9026_REG_R_STATUS) == 0xFF) {
+		arc_printk(D_INIT_REASONS, dev, "IO address %x empty\n",
+			   ioaddr);
 		goto err_out;
 	}
-	inb(_RESET);
+	arcnet_inb(ioaddr, COM9026_REG_R_RESET);
 	mdelay(RESETtime);
 
-	status = ASTATUS();
+	status = arcnet_inb(ioaddr, COM9026_REG_R_STATUS);
 
 	if ((status & 0x9D) != (NORXflag | RECONflag | TXFREEflag | RESETflag)) {
-		BUGMSG(D_INIT_REASONS, "Status invalid (%Xh).\n", status);
+		arc_printk(D_INIT_REASONS, dev, "Status invalid (%Xh)\n",
+			   status);
 		goto err_out;
 	}
-	BUGMSG(D_INIT_REASONS, "Status after reset: %X\n", status);
+	arc_printk(D_INIT_REASONS, dev, "Status after reset: %X\n", status);
 
-	ACOMMAND(CFLAGScmd | RESETclear | CONFIGclear);
+	arcnet_outb(CFLAGScmd | RESETclear | CONFIGclear,
+		    ioaddr, COM9026_REG_W_COMMAND);
 
-	BUGMSG(D_INIT_REASONS, "Status after reset acknowledged: %X\n", status);
+	arc_printk(D_INIT_REASONS, dev, "Status after reset acknowledged: %X\n",
+		   status);
 
-	status = ASTATUS();
+	status = arcnet_inb(ioaddr, COM9026_REG_R_STATUS);
 
 	if (status & RESETflag) {
-		BUGMSG(D_INIT_REASONS, "Eternal reset (status=%Xh)\n", status);
+		arc_printk(D_INIT_REASONS, dev, "Eternal reset (status=%Xh)\n",
+			   status);
 		goto err_out;
 	}
-	outb((0x16 | IOMAPflag) & ~ENABLE16flag, _CONFIG);
+	arcnet_outb((0x16 | IOMAPflag) & ~ENABLE16flag,
+		    ioaddr, COM9026_REG_RW_CONFIG);
 
 	/* Read first loc'n of memory */
 
-	outb(AUTOINCflag, _ADDR_HI);
-	outb(0, _ADDR_LO);
+	arcnet_outb(AUTOINCflag, ioaddr, COM9026_REG_W_ADDR_HI);
+	arcnet_outb(0, ioaddr,  COM9026_REG_W_ADDR_LO);
 
-	if ((status = inb(_MEMDATA)) != 0xd1) {
-		BUGMSG(D_INIT_REASONS, "Signature byte not found"
-		       " (%Xh instead).\n", status);
+	status = arcnet_inb(ioaddr, COM9026_REG_RW_MEMDATA);
+	if (status != 0xd1) {
+		arc_printk(D_INIT_REASONS, dev, "Signature byte not found (%Xh instead).\n",
+			   status);
 		goto err_out;
 	}
 	if (!dev->irq) {
-		/*
-		 * if we do this, we're sure to get an IRQ since the
+		/* if we do this, we're sure to get an IRQ since the
 		 * card has just reset and the NORXflag is on until
 		 * we tell it to start receiving.
 		 */
 
 		airqmask = probe_irq_on();
-		outb(NORXflag, _INTMASK);
+		arcnet_outb(NORXflag, ioaddr, COM9026_REG_W_INTMASK);
 		udelay(1);
-		outb(0, _INTMASK);
+		arcnet_outb(0, ioaddr, COM9026_REG_W_INTMASK);
 		dev->irq = probe_irq_off(airqmask);
 
 		if ((int)dev->irq <= 0) {
-			BUGMSG(D_INIT_REASONS, "Autoprobe IRQ failed\n");
+			arc_printk(D_INIT_REASONS, dev, "Autoprobe IRQ failed\n");
 			goto err_out;
 		}
 	}
@@ -227,7 +215,6 @@ err_out:
 	return -ENODEV;
 }
 
-
 /* Set up the struct net_device associated with this card.  Called after
  * probing succeeds.
  */
@@ -238,12 +225,14 @@ static int __init com90io_found(struct net_device *dev)
 	int err;
 
 	/* Reserve the irq */
-	if (request_irq(dev->irq, arcnet_interrupt, 0, "arcnet (COM90xx-IO)", dev)) {
-		BUGMSG(D_NORMAL, "Can't get IRQ %d!\n", dev->irq);
+	if (request_irq(dev->irq, arcnet_interrupt, 0,
+			"arcnet (COM90xx-IO)", dev)) {
+		arc_printk(D_NORMAL, dev, "Can't get IRQ %d!\n", dev->irq);
 		return -ENODEV;
 	}
 	/* Reserve the I/O region */
-	if (!request_region(dev->base_addr, ARCNET_TOTAL_SIZE, "arcnet (COM90xx-IO)")) {
+	if (!request_region(dev->base_addr, ARCNET_TOTAL_SIZE,
+			    "arcnet (COM90xx-IO)")) {
 		free_irq(dev->irq, dev);
 		return -EBUSY;
 	}
@@ -259,7 +248,7 @@ static int __init com90io_found(struct net_device *dev)
 	lp->hw.copy_from_card = com90io_copy_from_card;
 
 	lp->config = (0x16 | IOMAPflag) & ~ENABLE16flag;
-	SETCONF();
+	arcnet_outb(lp->config, ioaddr, COM9026_REG_RW_CONFIG);
 
 	/* get and check the station ID from offset 1 in shmem */
 
@@ -267,21 +256,20 @@ static int __init com90io_found(struct net_device *dev)
 
 	err = register_netdev(dev);
 	if (err) {
-		outb((inb(_CONFIG) & ~IOMAPflag), _CONFIG);
+		arcnet_outb(arcnet_inb(ioaddr, COM9026_REG_RW_CONFIG) & ~IOMAPflag,
+			    ioaddr, COM9026_REG_RW_CONFIG);
 		free_irq(dev->irq, dev);
 		release_region(dev->base_addr, ARCNET_TOTAL_SIZE);
 		return err;
 	}
 
-	BUGMSG(D_NORMAL, "COM90IO: station %02Xh found at %03lXh, IRQ %d.\n",
-	       dev->dev_addr[0], dev->base_addr, dev->irq);
+	arc_printk(D_NORMAL, dev, "COM90IO: station %02Xh found at %03lXh, IRQ %d.\n",
+		   dev->dev_addr[0], dev->base_addr, dev->irq);
 
 	return 0;
 }
 
-
-/*
- * Do a hardware reset on the card, and set up necessary registers.
+/* Do a hardware reset on the card, and set up necessary registers.
  *
  * This should be called as little as possible, because it disrupts the
  * token on the network (causes a RECON) and requires a significant delay.
@@ -293,67 +281,66 @@ static int com90io_reset(struct net_device *dev, int really_reset)
 	struct arcnet_local *lp = netdev_priv(dev);
 	short ioaddr = dev->base_addr;
 
-	BUGMSG(D_INIT, "Resetting %s (status=%02Xh)\n", dev->name, ASTATUS());
+	arc_printk(D_INIT, dev, "Resetting %s (status=%02Xh)\n",
+		   dev->name, arcnet_inb(ioaddr, COM9026_REG_R_STATUS));
 
 	if (really_reset) {
 		/* reset the card */
-		inb(_RESET);
+		arcnet_inb(ioaddr, COM9026_REG_R_RESET);
 		mdelay(RESETtime);
 	}
 	/* Set the thing to IO-mapped, 8-bit  mode */
 	lp->config = (0x1C | IOMAPflag) & ~ENABLE16flag;
-	SETCONF();
+	arcnet_outb(lp->config, ioaddr, COM9026_REG_RW_CONFIG);
 
-	ACOMMAND(CFLAGScmd | RESETclear);	/* clear flags & end reset */
-	ACOMMAND(CFLAGScmd | CONFIGclear);
+	arcnet_outb(CFLAGScmd | RESETclear, ioaddr, COM9026_REG_W_COMMAND);
+					/* clear flags & end reset */
+	arcnet_outb(CFLAGScmd | CONFIGclear, ioaddr, COM9026_REG_W_COMMAND);
 
 	/* verify that the ARCnet signature byte is present */
 	if (get_buffer_byte(dev, 0) != TESTvalue) {
-		BUGMSG(D_NORMAL, "reset failed: TESTvalue not present.\n");
+		arc_printk(D_NORMAL, dev, "reset failed: TESTvalue not present.\n");
 		return 1;
 	}
 	/* enable extended (512-byte) packets */
-	ACOMMAND(CONFIGcmd | EXTconf);
-
+	arcnet_outb(CONFIGcmd | EXTconf, ioaddr, COM9026_REG_W_COMMAND);
 	/* done!  return success. */
 	return 0;
 }
 
-
 static void com90io_command(struct net_device *dev, int cmd)
 {
 	short ioaddr = dev->base_addr;
 
-	ACOMMAND(cmd);
+	arcnet_outb(cmd, ioaddr, COM9026_REG_W_COMMAND);
 }
 
-
 static int com90io_status(struct net_device *dev)
 {
 	short ioaddr = dev->base_addr;
 
-	return ASTATUS();
+	return arcnet_inb(ioaddr, COM9026_REG_R_STATUS);
 }
 
-
 static void com90io_setmask(struct net_device *dev, int mask)
 {
 	short ioaddr = dev->base_addr;
 
-	AINTMASK(mask);
+	arcnet_outb(mask, ioaddr, COM9026_REG_W_INTMASK);
 }
 
-static void com90io_copy_to_card(struct net_device *dev, int bufnum, int offset,
-				 void *buf, int count)
+static void com90io_copy_to_card(struct net_device *dev, int bufnum,
+				 int offset, void *buf, int count)
 {
-	TIME("put_whole_buffer", count, put_whole_buffer(dev, bufnum * 512 + offset, count, buf));
+	TIME(dev, "put_whole_buffer", count,
+	     put_whole_buffer(dev, bufnum * 512 + offset, count, buf));
 }
 
-
-static void com90io_copy_from_card(struct net_device *dev, int bufnum, int offset,
-				   void *buf, int count)
+static void com90io_copy_from_card(struct net_device *dev, int bufnum,
+				   int offset, void *buf, int count)
 {
-	TIME("get_whole_buffer", count, get_whole_buffer(dev, bufnum * 512 + offset, count, buf));
+	TIME(dev, "get_whole_buffer", count,
+	     get_whole_buffer(dev, bufnum * 512 + offset, count, buf));
 }
 
 static int io;			/* use the insmod io= irq= shmem= options */
@@ -369,12 +356,13 @@ MODULE_LICENSE("GPL");
 static int __init com90io_setup(char *s)
 {
 	int ints[4];
+
 	s = get_options(s, 4, ints);
 	if (!ints[0])
 		return 0;
 	switch (ints[0]) {
 	default:		/* ERROR */
-		printk("com90io: Too many arguments.\n");
+		pr_err("Too many arguments\n");
 	case 2:		/* IRQ */
 		irq = ints[2];
 	case 1:		/* IO address */
@@ -421,8 +409,11 @@ static void __exit com90io_exit(void)
 
 	unregister_netdev(dev);
 
-	/* Set the thing back to MMAP mode, in case the old driver is loaded later */
-	outb((inb(_CONFIG) & ~IOMAPflag), _CONFIG);
+	/* In case the old driver is loaded later,
+	 * set the thing back to MMAP mode
+	 */
+	arcnet_outb(arcnet_inb(ioaddr, COM9026_REG_RW_CONFIG) & ~IOMAPflag,
+		    ioaddr, COM9026_REG_RW_CONFIG);
 
 	free_irq(dev->irq, dev);
 	release_region(dev->base_addr, ARCNET_TOTAL_SIZE);

drivers/net/arcnet/com90xx.c

@@ -1,6 +1,6 @@
 /*
  * Linux ARCnet driver - COM90xx chipset (memory-mapped buffers)
- * 
+ *
  * Written 1994-1999 by Avery Pennarun.
  * Written 1999 by Martin Mares <mj@ucw.cz>.
  * Derived from skeleton.c by Donald Becker.
@@ -24,6 +24,9 @@
  *
  * **********************
  */
+
+#define pr_fmt(fmt) "arcnet:" KBUILD_MODNAME ": " fmt
+
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/init.h>
@@ -32,12 +35,10 @@
 #include <linux/delay.h>
 #include <linux/netdevice.h>
 #include <linux/slab.h>
-#include <asm/io.h>
-#include <linux/arcdevice.h>
-
-
-#define VERSION "arcnet: COM90xx chipset support\n"
+#include <linux/io.h>
 
+#include "arcdevice.h"
+#include "com9026.h"
 
 /* Define this to speed up the autoprobe by assuming if only one io port and
  * shmem are left in the list at Stage 5, they must correspond to each
@@ -53,7 +54,6 @@
  */
 #undef FAST_PROBE
 
-
 /* Internal function declarations */
 static int com90xx_found(int ioaddr, int airq, u_long shmem, void __iomem *);
 static void com90xx_command(struct net_device *dev, int command);
@@ -62,8 +62,8 @@ static void com90xx_setmask(struct net_device *dev, int mask);
 static int com90xx_reset(struct net_device *dev, int really_reset);
 static void com90xx_copy_to_card(struct net_device *dev, int bufnum, int offset,
 				 void *buf, int count);
-static void com90xx_copy_from_card(struct net_device *dev, int bufnum, int offset,
-				   void *buf, int count);
+static void com90xx_copy_from_card(struct net_device *dev, int bufnum,
+				   int offset, void *buf, int count);
 
 /* Known ARCnet cards */
 
@@ -77,26 +77,7 @@ static int numcards;
 
 /* Amount of I/O memory used by the card */
 #define BUFFER_SIZE (512)
-#define MIRROR_SIZE (BUFFER_SIZE*4)
-
-/* COM 9026 controller chip --> ARCnet register addresses */
-#define _INTMASK (ioaddr+0)	/* writable */
-#define _STATUS  (ioaddr+0)	/* readable */
-#define _COMMAND (ioaddr+1)	/* writable, returns random vals on read (?) */
-#define _CONFIG  (ioaddr+2)	/* Configuration register */
-#define _RESET   (ioaddr+8)	/* software reset (on read) */
-#define _MEMDATA (ioaddr+12)	/* Data port for IO-mapped memory */
-#define _ADDR_HI (ioaddr+15)	/* Control registers for said */
-#define _ADDR_LO (ioaddr+14)
-
-#undef ASTATUS
-#undef ACOMMAND
-#undef AINTMASK
-
-#define ASTATUS()	inb(_STATUS)
-#define ACOMMAND(cmd) 	outb((cmd),_COMMAND)
-#define AINTMASK(msk)	outb((msk),_INTMASK)
-
+#define MIRROR_SIZE (BUFFER_SIZE * 4)
 
 static int com90xx_skip_probe __initdata = 0;
 
@@ -116,8 +97,7 @@ static void __init com90xx_probe(void)
 {
 	int count, status, ioaddr, numprint, airq, openparen = 0;
 	unsigned long airqmask;
-	int ports[(0x3f0 - 0x200) / 16 + 1] =
-	{0};
+	int ports[(0x3f0 - 0x200) / 16 + 1] = {	0 };
 	unsigned long *shmems;
 	void __iomem **iomem;
 	int numports, numshmems, *port;
@@ -127,18 +107,19 @@ static void __init com90xx_probe(void)
 	if (!io && !irq && !shmem && !*device && com90xx_skip_probe)
 		return;
 
-	shmems = kzalloc(((0x100000-0xa0000) / 0x800) * sizeof(unsigned long),
+	shmems = kzalloc(((0x100000 - 0xa0000) / 0x800) * sizeof(unsigned long),
 			 GFP_KERNEL);
 	if (!shmems)
 		return;
-	iomem = kzalloc(((0x100000-0xa0000) / 0x800) * sizeof(void __iomem *),
-			 GFP_KERNEL);
+	iomem = kzalloc(((0x100000 - 0xa0000) / 0x800) * sizeof(void __iomem *),
+			GFP_KERNEL);
 	if (!iomem) {
 		kfree(shmems);
 		return;
 	}
 
-	BUGLVL(D_NORMAL) printk(VERSION);
+	if (BUGLVL(D_NORMAL))
+		pr_info("%s\n", "COM90xx chipset support");
 
 	/* set up the arrays where we'll store the possible probe addresses */
 	numports = numshmems = 0;
@@ -161,38 +142,43 @@ static void __init com90xx_probe(void)
 		numprint++;
 		numprint %= 8;
 		if (!numprint) {
-			BUGMSG2(D_INIT, "\n");
-			BUGMSG2(D_INIT, "S1: ");
+			arc_cont(D_INIT, "\n");
+			arc_cont(D_INIT, "S1: ");
 		}
-		BUGMSG2(D_INIT, "%Xh ", *port);
+		arc_cont(D_INIT, "%Xh ", *port);
 
 		ioaddr = *port;
 
-		if (!request_region(*port, ARCNET_TOTAL_SIZE, "arcnet (90xx)")) {
-			BUGMSG2(D_INIT_REASONS, "(request_region)\n");
-			BUGMSG2(D_INIT_REASONS, "S1: ");
-			BUGLVL(D_INIT_REASONS) numprint = 0;
+		if (!request_region(*port, ARCNET_TOTAL_SIZE,
+				    "arcnet (90xx)")) {
+			arc_cont(D_INIT_REASONS, "(request_region)\n");
+			arc_cont(D_INIT_REASONS, "S1: ");
+			if (BUGLVL(D_INIT_REASONS))
+				numprint = 0;
 			*port-- = ports[--numports];
 			continue;
 		}
-		if (ASTATUS() == 0xFF) {
-			BUGMSG2(D_INIT_REASONS, "(empty)\n");
-			BUGMSG2(D_INIT_REASONS, "S1: ");
-			BUGLVL(D_INIT_REASONS) numprint = 0;
+		if (arcnet_inb(ioaddr, COM9026_REG_R_STATUS) == 0xFF) {
+			arc_cont(D_INIT_REASONS, "(empty)\n");
+			arc_cont(D_INIT_REASONS, "S1: ");
+			if (BUGLVL(D_INIT_REASONS))
+				numprint = 0;
 			release_region(*port, ARCNET_TOTAL_SIZE);
 			*port-- = ports[--numports];
 			continue;
 		}
-		inb(_RESET);	/* begin resetting card */
+		/* begin resetting card */
+		arcnet_inb(ioaddr, COM9026_REG_R_RESET);
 
-		BUGMSG2(D_INIT_REASONS, "\n");
-		BUGMSG2(D_INIT_REASONS, "S1: ");
-		BUGLVL(D_INIT_REASONS) numprint = 0;
+		arc_cont(D_INIT_REASONS, "\n");
+		arc_cont(D_INIT_REASONS, "S1: ");
+		if (BUGLVL(D_INIT_REASONS))
+			numprint = 0;
 	}
-	BUGMSG2(D_INIT, "\n");
+	arc_cont(D_INIT, "\n");
 
 	if (!numports) {
-		BUGMSG2(D_NORMAL, "S1: No ARCnet cards found.\n");
+		arc_cont(D_NORMAL, "S1: No ARCnet cards found.\n");
 		kfree(shmems);
 		kfree(iomem);
 		return;
@@ -206,12 +192,12 @@ static void __init com90xx_probe(void)
 		numprint++;
 		numprint %= 8;
 		if (!numprint) {
-			BUGMSG2(D_INIT, "\n");
-			BUGMSG2(D_INIT, "S2: ");
+			arc_cont(D_INIT, "\n");
+			arc_cont(D_INIT, "S2: ");
 		}
-		BUGMSG2(D_INIT, "%Xh ", *port);
+		arc_cont(D_INIT, "%Xh ", *port);
 	}
-	BUGMSG2(D_INIT, "\n");
+	arc_cont(D_INIT, "\n");
 	mdelay(RESETtime);
 
 	/* Stage 3: abandon any shmem addresses that don't have the signature
@@ -224,29 +210,33 @@ static void __init com90xx_probe(void)
 		numprint++;
 		numprint %= 8;
 		if (!numprint) {
-			BUGMSG2(D_INIT, "\n");
-			BUGMSG2(D_INIT, "S3: ");
+			arc_cont(D_INIT, "\n");
+			arc_cont(D_INIT, "S3: ");
 		}
-		BUGMSG2(D_INIT, "%lXh ", *p);
+		arc_cont(D_INIT, "%lXh ", *p);
 
 		if (!request_mem_region(*p, MIRROR_SIZE, "arcnet (90xx)")) {
-			BUGMSG2(D_INIT_REASONS, "(request_mem_region)\n");
-			BUGMSG2(D_INIT_REASONS, "Stage 3: ");
-			BUGLVL(D_INIT_REASONS) numprint = 0;
+			arc_cont(D_INIT_REASONS, "(request_mem_region)\n");
+			arc_cont(D_INIT_REASONS, "Stage 3: ");
+			if (BUGLVL(D_INIT_REASONS))
+				numprint = 0;
 			goto out;
 		}
 		base = ioremap(*p, MIRROR_SIZE);
 		if (!base) {
-			BUGMSG2(D_INIT_REASONS, "(ioremap)\n");
-			BUGMSG2(D_INIT_REASONS, "Stage 3: ");
-			BUGLVL(D_INIT_REASONS) numprint = 0;
+			arc_cont(D_INIT_REASONS, "(ioremap)\n");
+			arc_cont(D_INIT_REASONS, "Stage 3: ");
+			if (BUGLVL(D_INIT_REASONS))
+				numprint = 0;
 			goto out1;
 		}
-		if (readb(base) != TESTvalue) {
-			BUGMSG2(D_INIT_REASONS, "(%02Xh != %02Xh)\n",
-				readb(base), TESTvalue);
-			BUGMSG2(D_INIT_REASONS, "S3: ");
-			BUGLVL(D_INIT_REASONS) numprint = 0;
+		if (arcnet_readb(base, COM9026_REG_R_STATUS) != TESTvalue) {
+			arc_cont(D_INIT_REASONS, "(%02Xh != %02Xh)\n",
+				 arcnet_readb(base, COM9026_REG_R_STATUS),
+				 TESTvalue);
+			arc_cont(D_INIT_REASONS, "S3: ");
+			if (BUGLVL(D_INIT_REASONS))
+				numprint = 0;
 			goto out2;
 		}
 		/* By writing 0x42 to the TESTvalue location, we also make
@@ -254,15 +244,16 @@ static void __init com90xx_probe(void)
 		 * in another pass through this loop, they will be discarded
 		 * because *cptr != TESTvalue.
 		 */
-		writeb(0x42, base);
-		if (readb(base) != 0x42) {
-			BUGMSG2(D_INIT_REASONS, "(read only)\n");
-			BUGMSG2(D_INIT_REASONS, "S3: ");
+		arcnet_writeb(0x42, base, COM9026_REG_W_INTMASK);
+		if (arcnet_readb(base, COM9026_REG_R_STATUS) != 0x42) {
+			arc_cont(D_INIT_REASONS, "(read only)\n");
+			arc_cont(D_INIT_REASONS, "S3: ");
 			goto out2;
 		}
-		BUGMSG2(D_INIT_REASONS, "\n");
-		BUGMSG2(D_INIT_REASONS, "S3: ");
-		BUGLVL(D_INIT_REASONS) numprint = 0;
+		arc_cont(D_INIT_REASONS, "\n");
+		arc_cont(D_INIT_REASONS, "S3: ");
+		if (BUGLVL(D_INIT_REASONS))
+			numprint = 0;
 		iomem[index] = base;
 		continue;
 	out2:
@@ -273,10 +264,10 @@ static void __init com90xx_probe(void)
 		*p-- = shmems[--numshmems];
 		index--;
 	}
-	BUGMSG2(D_INIT, "\n");
+	arc_cont(D_INIT, "\n");
 
 	if (!numshmems) {
-		BUGMSG2(D_NORMAL, "S3: No ARCnet cards found.\n");
+		arc_cont(D_NORMAL, "S3: No ARCnet cards found.\n");
 		for (port = &ports[0]; port < ports + numports; port++)
 			release_region(*port, ARCNET_TOTAL_SIZE);
 		kfree(shmems);
@@ -291,12 +282,12 @@ static void __init com90xx_probe(void)
 		numprint++;
 		numprint %= 8;
 		if (!numprint) {
-			BUGMSG2(D_INIT, "\n");
-			BUGMSG2(D_INIT, "S4: ");
+			arc_cont(D_INIT, "\n");
+			arc_cont(D_INIT, "S4: ");
 		}
-		BUGMSG2(D_INIT, "%lXh ", *p);
+		arc_cont(D_INIT, "%lXh ", *p);
 	}
-	BUGMSG2(D_INIT, "\n");
+	arc_cont(D_INIT, "\n");
 
 	/* Stage 5: for any ports that have the correct status, can disable
 	 * the RESET flag, and (if no irq is given) generate an autoirq,
@@ -308,33 +299,37 @@ static void __init com90xx_probe(void)
 	numprint = -1;
 	for (port = &ports[0]; port < ports + numports; port++) {
 		int found = 0;
+
 		numprint++;
 		numprint %= 8;
 		if (!numprint) {
-			BUGMSG2(D_INIT, "\n");
-			BUGMSG2(D_INIT, "S5: ");
+			arc_cont(D_INIT, "\n");
+			arc_cont(D_INIT, "S5: ");
 		}
-		BUGMSG2(D_INIT, "%Xh ", *port);
+		arc_cont(D_INIT, "%Xh ", *port);
 
 		ioaddr = *port;
-		status = ASTATUS();
+		status = arcnet_inb(ioaddr, COM9026_REG_R_STATUS);
 
 		if ((status & 0x9D)
 		    != (NORXflag | RECONflag | TXFREEflag | RESETflag)) {
-			BUGMSG2(D_INIT_REASONS, "(status=%Xh)\n", status);
-			BUGMSG2(D_INIT_REASONS, "S5: ");
-			BUGLVL(D_INIT_REASONS) numprint = 0;
+			arc_cont(D_INIT_REASONS, "(status=%Xh)\n", status);
+			arc_cont(D_INIT_REASONS, "S5: ");
+			if (BUGLVL(D_INIT_REASONS))
+				numprint = 0;
 			release_region(*port, ARCNET_TOTAL_SIZE);
 			*port-- = ports[--numports];
 			continue;
 		}
-		ACOMMAND(CFLAGScmd | RESETclear | CONFIGclear);
-		status = ASTATUS();
+		arcnet_outb(CFLAGScmd | RESETclear | CONFIGclear,
+			    ioaddr, COM9026_REG_W_COMMAND);
+		status = arcnet_inb(ioaddr, COM9026_REG_R_STATUS);
 		if (status & RESETflag) {
-			BUGMSG2(D_INIT_REASONS, " (eternal reset, status=%Xh)\n",
-				status);
-			BUGMSG2(D_INIT_REASONS, "S5: ");
-			BUGLVL(D_INIT_REASONS) numprint = 0;
+			arc_cont(D_INIT_REASONS, " (eternal reset, status=%Xh)\n",
+				 status);
+			arc_cont(D_INIT_REASONS, "S5: ");
+			if (BUGLVL(D_INIT_REASONS))
+				numprint = 0;
 			release_region(*port, ARCNET_TOTAL_SIZE);
 			*port-- = ports[--numports];
 			continue;
@@ -348,15 +343,16 @@ static void __init com90xx_probe(void)
 			 * we tell it to start receiving.
 			 */
 			airqmask = probe_irq_on();
-			AINTMASK(NORXflag);
+			arcnet_outb(NORXflag, ioaddr, COM9026_REG_W_INTMASK);
 			udelay(1);
-			AINTMASK(0);
+			arcnet_outb(0, ioaddr, COM9026_REG_W_INTMASK);
 			airq = probe_irq_off(airqmask);
 
 			if (airq <= 0) {
-				BUGMSG2(D_INIT_REASONS, "(airq=%d)\n", airq);
-				BUGMSG2(D_INIT_REASONS, "S5: ");
-				BUGLVL(D_INIT_REASONS) numprint = 0;
+				arc_cont(D_INIT_REASONS, "(airq=%d)\n", airq);
+				arc_cont(D_INIT_REASONS, "S5: ");
+				if (BUGLVL(D_INIT_REASONS))
+					numprint = 0;
 				release_region(*port, ARCNET_TOTAL_SIZE);
 				*port-- = ports[--numports];
 				continue;
@@ -365,7 +361,7 @@ static void __init com90xx_probe(void)
 			airq = irq;
 		}
 
-		BUGMSG2(D_INIT, "(%d,", airq);
+		arc_cont(D_INIT, "(%d,", airq);
 		openparen = 1;
 
 		/* Everything seems okay.  But which shmem, if any, puts
@@ -376,14 +372,15 @@ static void __init com90xx_probe(void)
 		 */
 #ifdef FAST_PROBE
 		if (numports > 1 || numshmems > 1) {
-			inb(_RESET);
+			arcnet_inb(ioaddr, COM9026_REG_R_RESET);
 			mdelay(RESETtime);
 		} else {
 			/* just one shmem and port, assume they match */
-			writeb(TESTvalue, iomem[0]);
+			arcnet_writeb(TESTvalue, iomem[0],
+				      COM9026_REG_W_INTMASK);
 		}
 #else
-		inb(_RESET);
+		arcnet_inb(ioaddr, COM9026_REG_R_RESET);
 		mdelay(RESETtime);
 #endif
 
@@ -391,8 +388,8 @@ static void __init com90xx_probe(void)
 			u_long ptr = shmems[index];
 			void __iomem *base = iomem[index];
 
-			if (readb(base) == TESTvalue) {	/* found one */
-				BUGMSG2(D_INIT, "%lXh)\n", *p);
+			if (arcnet_readb(base, COM9026_REG_R_STATUS) == TESTvalue) {	/* found one */
+				arc_cont(D_INIT, "%lXh)\n", *p);
 				openparen = 0;
 
 				/* register the card */
@@ -405,25 +402,30 @@ static void __init com90xx_probe(void)
 				iomem[index] = iomem[numshmems];
 				break;	/* go to the next I/O port */
 			} else {
-				BUGMSG2(D_INIT_REASONS, "%Xh-", readb(base));
+				arc_cont(D_INIT_REASONS, "%Xh-",
+					 arcnet_readb(base, COM9026_REG_R_STATUS));
 			}
 		}
 
 		if (openparen) {
-			BUGLVL(D_INIT) printk("no matching shmem)\n");
-			BUGLVL(D_INIT_REASONS) printk("S5: ");
-			BUGLVL(D_INIT_REASONS) numprint = 0;
+			if (BUGLVL(D_INIT))
+				pr_cont("no matching shmem)\n");
+			if (BUGLVL(D_INIT_REASONS)) {
+				pr_cont("S5: ");
+				numprint = 0;
+			}
 		}
 		if (!found)
 			release_region(*port, ARCNET_TOTAL_SIZE);
 		*port-- = ports[--numports];
 	}
 
-	BUGLVL(D_INIT_REASONS) printk("\n");
+	if (BUGLVL(D_INIT_REASONS))
+		pr_cont("\n");
 
 	/* Now put back TESTvalue on all leftover shmems. */
 	for (index = 0; index < numshmems; index++) {
-		writeb(TESTvalue, iomem[index]);
+		arcnet_writeb(TESTvalue, iomem[index], COM9026_REG_W_INTMASK);
 		iounmap(iomem[index]);
 		release_mem_region(shmems[index], MIRROR_SIZE);
 	}
@@ -441,7 +443,7 @@ static int check_mirror(unsigned long addr, size_t size)
 
 	p = ioremap(addr, size);
 	if (p) {
-		if (readb(p) == TESTvalue)
+		if (arcnet_readb(p, COM9026_REG_R_STATUS) == TESTvalue)
 			res = 1;
 		else
 			res = 0;
@@ -455,7 +457,8 @@ static int check_mirror(unsigned long addr, size_t size)
 /* Set up the struct net_device associated with this card.  Called after
  * probing succeeds.
  */
-static int __init com90xx_found(int ioaddr, int airq, u_long shmem, void __iomem *p)
+static int __init com90xx_found(int ioaddr, int airq, u_long shmem,
+				void __iomem *p)
 {
 	struct net_device *dev = NULL;
 	struct arcnet_local *lp;
@@ -465,7 +468,7 @@ static int __init com90xx_found(int ioaddr, int airq, u_long shmem, void __iomem
 	/* allocate struct net_device */
 	dev = alloc_arcdev(device);
 	if (!dev) {
-		BUGMSG2(D_NORMAL, "com90xx: Can't allocate device!\n");
+		arc_cont(D_NORMAL, "com90xx: Can't allocate device!\n");
 		iounmap(p);
 		release_mem_region(shmem, MIRROR_SIZE);
 		return -ENOMEM;
@@ -478,7 +481,7 @@ static int __init com90xx_found(int ioaddr, int airq, u_long shmem, void __iomem
 	 * 2k (or there are no mirrors at all) but on some, it's 4k.
 	 */
 	mirror_size = MIRROR_SIZE;
-	if (readb(p) == TESTvalue &&
+	if (arcnet_readb(p, COM9026_REG_R_STATUS) == TESTvalue &&
 	    check_mirror(shmem - MIRROR_SIZE, MIRROR_SIZE) == 0 &&
 	    check_mirror(shmem - 2 * MIRROR_SIZE, MIRROR_SIZE) == 1)
 		mirror_size = 2 * MIRROR_SIZE;
@@ -499,12 +502,14 @@ static int __init com90xx_found(int ioaddr, int airq, u_long shmem, void __iomem
 	iounmap(p);
 	release_mem_region(shmem, MIRROR_SIZE);
 
-	if (!request_mem_region(dev->mem_start, dev->mem_end - dev->mem_start + 1, "arcnet (90xx)"))
+	if (!request_mem_region(dev->mem_start,
+				dev->mem_end - dev->mem_start + 1,
+				"arcnet (90xx)"))
 		goto err_free_dev;
 
 	/* reserve the irq */
 	if (request_irq(airq, arcnet_interrupt, 0, "arcnet (90xx)", dev)) {
-		BUGMSG(D_NORMAL, "Can't get IRQ %d!\n", airq);
+		arc_printk(D_NORMAL, dev, "Can't get IRQ %d!\n", airq);
 		goto err_release_mem;
 	}
 	dev->irq = airq;
@@ -518,22 +523,23 @@ static int __init com90xx_found(int ioaddr, int airq, u_long shmem, void __iomem
 	lp->hw.owner = THIS_MODULE;
 	lp->hw.copy_to_card = com90xx_copy_to_card;
 	lp->hw.copy_from_card = com90xx_copy_from_card;
-	lp->mem_start = ioremap(dev->mem_start, dev->mem_end - dev->mem_start + 1);
+	lp->mem_start = ioremap(dev->mem_start,
+				dev->mem_end - dev->mem_start + 1);
 	if (!lp->mem_start) {
-		BUGMSG(D_NORMAL, "Can't remap device memory!\n");
+		arc_printk(D_NORMAL, dev, "Can't remap device memory!\n");
 		goto err_free_irq;
 	}
 
 	/* get and check the station ID from offset 1 in shmem */
-	dev->dev_addr[0] = readb(lp->mem_start + 1);
+	dev->dev_addr[0] = arcnet_readb(lp->mem_start, COM9026_REG_R_STATION);
 
 	dev->base_addr = ioaddr;
 
-	BUGMSG(D_NORMAL, "COM90xx station %02Xh found at %03lXh, IRQ %d, "
-	       "ShMem %lXh (%ld*%xh).\n",
-	       dev->dev_addr[0],
-	       dev->base_addr, dev->irq, dev->mem_start,
-	 (dev->mem_end - dev->mem_start + 1) / mirror_size, mirror_size);
+	arc_printk(D_NORMAL, dev, "COM90xx station %02Xh found at %03lXh, IRQ %d, ShMem %lXh (%ld*%xh).\n",
+		   dev->dev_addr[0],
+		   dev->base_addr, dev->irq, dev->mem_start,
+		   (dev->mem_end - dev->mem_start + 1) / mirror_size,
+		   mirror_size);
 
 	if (register_netdev(dev))
 		goto err_unmap;
@@ -552,34 +558,29 @@ err_free_dev:
 	return -EIO;
 }
 
-
 static void com90xx_command(struct net_device *dev, int cmd)
 {
 	short ioaddr = dev->base_addr;
 
-	ACOMMAND(cmd);
+	arcnet_outb(cmd, ioaddr, COM9026_REG_W_COMMAND);
 }
 
-
 static int com90xx_status(struct net_device *dev)
 {
 	short ioaddr = dev->base_addr;
 
-	return ASTATUS();
+	return arcnet_inb(ioaddr, COM9026_REG_R_STATUS);
 }
 
-
 static void com90xx_setmask(struct net_device *dev, int mask)
 {
 	short ioaddr = dev->base_addr;
 
-	AINTMASK(mask);
+	arcnet_outb(mask, ioaddr, COM9026_REG_W_INTMASK);
 }
 
-
-/*
- * Do a hardware reset on the card, and set up necessary registers.
- * 
+/* Do a hardware reset on the card, and set up necessary registers.
+ *
  * This should be called as little as possible, because it disrupts the
  * token on the network (causes a RECON) and requires a significant delay.
  *
@@ -590,53 +591,58 @@ static int com90xx_reset(struct net_device *dev, int really_reset)
 	struct arcnet_local *lp = netdev_priv(dev);
 	short ioaddr = dev->base_addr;
 
-	BUGMSG(D_INIT, "Resetting (status=%02Xh)\n", ASTATUS());
+	arc_printk(D_INIT, dev, "Resetting (status=%02Xh)\n",
+		   arcnet_inb(ioaddr, COM9026_REG_R_STATUS));
 
 	if (really_reset) {
 		/* reset the card */
-		inb(_RESET);
+		arcnet_inb(ioaddr, COM9026_REG_R_RESET);
 		mdelay(RESETtime);
 	}
-	ACOMMAND(CFLAGScmd | RESETclear);	/* clear flags & end reset */
-	ACOMMAND(CFLAGScmd | CONFIGclear);
+	/* clear flags & end reset */
+	arcnet_outb(CFLAGScmd | RESETclear, ioaddr, COM9026_REG_W_COMMAND);
+	arcnet_outb(CFLAGScmd | CONFIGclear, ioaddr, COM9026_REG_W_COMMAND);
 
+#if 0
 	/* don't do this until we verify that it doesn't hurt older cards! */
-	/* outb(inb(_CONFIG) | ENABLE16flag, _CONFIG); */
+	arcnet_outb(arcnet_inb(ioaddr, COM9026_REG_RW_CONFIG) | ENABLE16flag,
+		    ioaddr, COM9026_REG_RW_CONFIG);
+#endif
 
 	/* verify that the ARCnet signature byte is present */
-	if (readb(lp->mem_start) != TESTvalue) {
+	if (arcnet_readb(lp->mem_start, COM9026_REG_R_STATUS) != TESTvalue) {
 		if (really_reset)
-			BUGMSG(D_NORMAL, "reset failed: TESTvalue not present.\n");
+			arc_printk(D_NORMAL, dev, "reset failed: TESTvalue not present.\n");
 		return 1;
 	}
 	/* enable extended (512-byte) packets */
-	ACOMMAND(CONFIGcmd | EXTconf);
+	arcnet_outb(CONFIGcmd | EXTconf, ioaddr, COM9026_REG_W_COMMAND);
 
 	/* clean out all the memory to make debugging make more sense :) */
-	BUGLVL(D_DURING)
-	    memset_io(lp->mem_start, 0x42, 2048);
+	if (BUGLVL(D_DURING))
+		memset_io(lp->mem_start, 0x42, 2048);
 
 	/* done!  return success. */
 	return 0;
 }
 
-static void com90xx_copy_to_card(struct net_device *dev, int bufnum, int offset,
-				 void *buf, int count)
+static void com90xx_copy_to_card(struct net_device *dev, int bufnum,
+				 int offset, void *buf, int count)
 {
 	struct arcnet_local *lp = netdev_priv(dev);
 	void __iomem *memaddr = lp->mem_start + bufnum * 512 + offset;
-	TIME("memcpy_toio", count, memcpy_toio(memaddr, buf, count));
-}
 
+	TIME(dev, "memcpy_toio", count, memcpy_toio(memaddr, buf, count));
+}
 
-static void com90xx_copy_from_card(struct net_device *dev, int bufnum, int offset,
-				   void *buf, int count)
+static void com90xx_copy_from_card(struct net_device *dev, int bufnum,
+				   int offset, void *buf, int count)
 {
 	struct arcnet_local *lp = netdev_priv(dev);
 	void __iomem *memaddr = lp->mem_start + bufnum * 512 + offset;
-	TIME("memcpy_fromio", count, memcpy_fromio(buf, memaddr, count));
-}
 
+	TIME(dev, "memcpy_fromio", count, memcpy_fromio(buf, memaddr, count));
+}
 
 MODULE_LICENSE("GPL");
 
@@ -664,7 +670,8 @@ static void __exit com90xx_exit(void)
 		free_irq(dev->irq, dev);
 		iounmap(lp->mem_start);
 		release_region(dev->base_addr, ARCNET_TOTAL_SIZE);
-		release_mem_region(dev->mem_start, dev->mem_end - dev->mem_start + 1);
+		release_mem_region(dev->mem_start,
+				   dev->mem_end - dev->mem_start + 1);
 		free_netdev(dev);
 	}
 }
@@ -679,13 +686,13 @@ static int __init com90xx_setup(char *s)
 
 	s = get_options(s, 8, ints);
 	if (!ints[0] && !*s) {
-		printk("com90xx: Disabled.\n");
+		pr_notice("Disabled\n");
 		return 1;
 	}
 
 	switch (ints[0]) {
 	default:		/* ERROR */
-		printk("com90xx: Too many arguments.\n");
+		pr_err("Too many arguments\n");
 	case 3:		/* Mem address */
 		shmem = ints[3];
 	case 2:		/* IRQ */

drivers/net/arcnet/rfc1051.c

@@ -1,6 +1,6 @@
 /*
  * Linux ARCnet driver - RFC1051 ("simple" standard) packet encapsulation
- * 
+ *
  * Written 1994-1999 by Avery Pennarun.
  * Derived from skeleton.c by Donald Becker.
  *
@@ -23,6 +23,9 @@
  *
  * **********************
  */
+
+#define pr_fmt(fmt) "arcnet:" KBUILD_MODNAME ": " fmt
+
 #include <linux/module.h>
 #include <linux/gfp.h>
 #include <linux/init.h>
@@ -30,10 +33,8 @@
 #include <net/arp.h>
 #include <linux/netdevice.h>
 #include <linux/skbuff.h>
-#include <linux/arcdevice.h>
-
-#define VERSION "arcnet: RFC1051 \"simple standard\" (`s') encapsulation support loaded.\n"
 
+#include "arcdevice.h"
 
 static __be16 type_trans(struct sk_buff *skb, struct net_device *dev);
 static void rx(struct net_device *dev, int bufnum,
@@ -43,9 +44,7 @@ static int build_header(struct sk_buff *skb, struct net_device *dev,
 static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length,
 		      int bufnum);
 
-
-static struct ArcProto rfc1051_proto =
-{
+static struct ArcProto rfc1051_proto = {
 	.suffix		= 's',
 	.mtu		= XMTU - RFC1051_HDR_SIZE,
 	.is_ip          = 1,
@@ -56,10 +55,9 @@ static struct ArcProto rfc1051_proto =
 	.ack_tx         = NULL
 };
 
-
 static int __init arcnet_rfc1051_init(void)
 {
-	printk(VERSION);
+	pr_info("%s\n", "RFC1051 \"simple standard\" (`s') encapsulation support loaded");
 
 	arc_proto_map[ARC_P_IP_RFC1051]
 	    = arc_proto_map[ARC_P_ARP_RFC1051]
@@ -82,14 +80,13 @@ module_exit(arcnet_rfc1051_exit);
 
 MODULE_LICENSE("GPL");
 
-/*
- * Determine a packet's protocol ID.
- * 
+/* Determine a packet's protocol ID.
+ *
  * With ARCnet we have to convert everything to Ethernet-style stuff.
  */
 static __be16 type_trans(struct sk_buff *skb, struct net_device *dev)
 {
-	struct archdr *pkt = (struct archdr *) skb->data;
+	struct archdr *pkt = (struct archdr *)skb->data;
 	struct arc_rfc1051 *soft = &pkt->soft.rfc1051;
 	int hdr_size = ARC_HDR_SIZE + RFC1051_HDR_SIZE;
 
@@ -97,9 +94,9 @@ static __be16 type_trans(struct sk_buff *skb, struct net_device *dev)
 	skb_reset_mac_header(skb);
 	skb_pull(skb, hdr_size);
 
-	if (pkt->hard.dest == 0)
+	if (pkt->hard.dest == 0) {
 		skb->pkt_type = PACKET_BROADCAST;
-	else if (dev->flags & IFF_PROMISC) {
+	} else if (dev->flags & IFF_PROMISC) {
 		/* if we're not sending to ourselves :) */
 		if (pkt->hard.dest != dev->dev_addr[0])
 			skb->pkt_type = PACKET_OTHERHOST;
@@ -120,7 +117,6 @@ static __be16 type_trans(struct sk_buff *skb, struct net_device *dev)
 	return htons(ETH_P_IP);
 }
 
-
 /* packet receiver */
 static void rx(struct net_device *dev, int bufnum,
 	       struct archdr *pkthdr, int length)
@@ -130,7 +126,7 @@ static void rx(struct net_device *dev, int bufnum,
 	struct archdr *pkt = pkthdr;
 	int ofs;
 
-	BUGMSG(D_DURING, "it's a raw packet (length=%d)\n", length);
+	arc_printk(D_DURING, dev, "it's a raw packet (length=%d)\n", length);
 
 	if (length >= MinTU)
 		ofs = 512 - length;
@@ -138,15 +134,14 @@ static void rx(struct net_device *dev, int bufnum,
 		ofs = 256 - length;
 
 	skb = alloc_skb(length + ARC_HDR_SIZE, GFP_ATOMIC);
-	if (skb == NULL) {
-		BUGMSG(D_NORMAL, "Memory squeeze, dropping packet.\n");
+	if (!skb) {
 		dev->stats.rx_dropped++;
 		return;
 	}
 	skb_put(skb, length + ARC_HDR_SIZE);
 	skb->dev = dev;
 
-	pkt = (struct archdr *) skb->data;
+	pkt = (struct archdr *)skb->data;
 
 	/* up to sizeof(pkt->soft) has already been copied from the card */
 	memcpy(pkt, pkthdr, sizeof(struct archdr));
@@ -155,21 +150,19 @@ static void rx(struct net_device *dev, int bufnum,
 				      pkt->soft.raw + sizeof(pkt->soft),
 				      length - sizeof(pkt->soft));
 
-	BUGLVL(D_SKB) arcnet_dump_skb(dev, skb, "rx");
+	if (BUGLVL(D_SKB))
+		arcnet_dump_skb(dev, skb, "rx");
 
 	skb->protocol = type_trans(skb, dev);
 	netif_rx(skb);
 }
 
-
-/*
- * Create the ARCnet hard/soft headers for RFC1051.
- */
+/* Create the ARCnet hard/soft headers for RFC1051 */
 static int build_header(struct sk_buff *skb, struct net_device *dev,
 			unsigned short type, uint8_t daddr)
 {
 	int hdr_size = ARC_HDR_SIZE + RFC1051_HDR_SIZE;
-	struct archdr *pkt = (struct archdr *) skb_push(skb, hdr_size);
+	struct archdr *pkt = (struct archdr *)skb_push(skb, hdr_size);
 	struct arc_rfc1051 *soft = &pkt->soft.rfc1051;
 
 	/* set the protocol ID according to RFC1051 */
@@ -181,29 +174,26 @@ static int build_header(struct sk_buff *skb, struct net_device *dev,
 		soft->proto = ARC_P_ARP_RFC1051;
 		break;
 	default:
-		BUGMSG(D_NORMAL, "RFC1051: I don't understand protocol %d (%Xh)\n",
-		       type, type);
+		arc_printk(D_NORMAL, dev, "RFC1051: I don't understand protocol %d (%Xh)\n",
+			   type, type);
 		dev->stats.tx_errors++;
 		dev->stats.tx_aborted_errors++;
 		return 0;
 	}
 
-
-	/*
-	 * Set the source hardware address.
+	/* Set the source hardware address.
 	 *
 	 * This is pretty pointless for most purposes, but it can help in
-	 * debugging.  ARCnet does not allow us to change the source address in
-	 * the actual packet sent)
+	 * debugging.  ARCnet does not allow us to change the source address
+	 * in the actual packet sent.
 	 */
 	pkt->hard.source = *dev->dev_addr;
 
 	/* see linux/net/ethernet/eth.c to see where I got the following */
 
 	if (dev->flags & (IFF_LOOPBACK | IFF_NOARP)) {
-		/* 
-		 * FIXME: fill in the last byte of the dest ipaddr here to better
-		 * comply with RFC1051 in "noarp" mode.
+		/* FIXME: fill in the last byte of the dest ipaddr here to
+		 * better comply with RFC1051 in "noarp" mode.
 		 */
 		pkt->hard.dest = 0;
 		return hdr_size;
@@ -214,7 +204,6 @@ static int build_header(struct sk_buff *skb, struct net_device *dev,
 	return hdr_size;	/* success */
 }
 
-
 static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length,
 		      int bufnum)
 {
@@ -222,15 +211,16 @@ static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length,
 	struct arc_hardware *hard = &pkt->hard;
 	int ofs;
 
-	BUGMSG(D_DURING, "prepare_tx: txbufs=%d/%d/%d\n",
-	       lp->next_tx, lp->cur_tx, bufnum);
+	arc_printk(D_DURING, dev, "prepare_tx: txbufs=%d/%d/%d\n",
+		   lp->next_tx, lp->cur_tx, bufnum);
 
-	length -= ARC_HDR_SIZE;	/* hard header is not included in packet length */
+	/* hard header is not included in packet length */
+	length -= ARC_HDR_SIZE;
 
 	if (length > XMTU) {
 		/* should never happen! other people already check for this. */
-		BUGMSG(D_NORMAL, "Bug!  prepare_tx with size %d (> %d)\n",
-		       length, XMTU);
+		arc_printk(D_NORMAL, dev, "Bug!  prepare_tx with size %d (> %d)\n",
+			   length, XMTU);
 		length = XMTU;
 	}
 	if (length > MinTU) {
@@ -239,8 +229,9 @@ static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length,
 	} else if (length > MTU) {
 		hard->offset[0] = 0;
 		hard->offset[1] = ofs = 512 - length - 3;
-	} else
+	} else {
 		hard->offset[0] = ofs = 256 - length;
+	}
 
 	lp->hw.copy_to_card(dev, bufnum, 0, hard, ARC_HDR_SIZE);
 	lp->hw.copy_to_card(dev, bufnum, ofs, &pkt->soft, length);

drivers/net/arcnet/rfc1201.c

@@ -1,6 +1,6 @@
 /*
  * Linux ARCnet driver - RFC1201 (standard) packet encapsulation
- * 
+ *
  * Written 1994-1999 by Avery Pennarun.
  * Derived from skeleton.c by Donald Becker.
  *
@@ -23,17 +23,19 @@
  *
  * **********************
  */
+
+#define pr_fmt(fmt) "arcnet:" KBUILD_MODNAME ": " fmt
+
 #include <linux/gfp.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/if_arp.h>
 #include <linux/netdevice.h>
 #include <linux/skbuff.h>
-#include <linux/arcdevice.h>
 
-MODULE_LICENSE("GPL");
-#define VERSION "arcnet: RFC1201 \"standard\" (`a') encapsulation support loaded.\n"
+#include "arcdevice.h"
 
+MODULE_LICENSE("GPL");
 
 static __be16 type_trans(struct sk_buff *skb, struct net_device *dev);
 static void rx(struct net_device *dev, int bufnum,
@@ -44,8 +46,7 @@ static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length,
 		      int bufnum);
 static int continue_tx(struct net_device *dev, int bufnum);
 
-static struct ArcProto rfc1201_proto =
-{
+static struct ArcProto rfc1201_proto = {
 	.suffix		= 'a',
 	.mtu		= 1500,	/* could be more, but some receivers can't handle it... */
 	.is_ip          = 1,    /* This is for sending IP and ARP packages */
@@ -56,10 +57,9 @@ static struct ArcProto rfc1201_proto =
 	.ack_tx         = NULL
 };
 
-
 static int __init arcnet_rfc1201_init(void)
 {
-	printk(VERSION);
+	pr_info("%s\n", "RFC1201 \"standard\" (`a') encapsulation support loaded");
 
 	arc_proto_map[ARC_P_IP]
 	    = arc_proto_map[ARC_P_IPV6]
@@ -84,14 +84,13 @@ static void __exit arcnet_rfc1201_exit(void)
 module_init(arcnet_rfc1201_init);
 module_exit(arcnet_rfc1201_exit);
 
-/*
- * Determine a packet's protocol ID.
- * 
+/* Determine a packet's protocol ID.
+ *
  * With ARCnet we have to convert everything to Ethernet-style stuff.
  */
 static __be16 type_trans(struct sk_buff *skb, struct net_device *dev)
 {
-	struct archdr *pkt = (struct archdr *) skb->data;
+	struct archdr *pkt = (struct archdr *)skb->data;
 	struct arc_rfc1201 *soft = &pkt->soft.rfc1201;
 	int hdr_size = ARC_HDR_SIZE + RFC1201_HDR_SIZE;
 
@@ -99,9 +98,9 @@ static __be16 type_trans(struct sk_buff *skb, struct net_device *dev)
 	skb_reset_mac_header(skb);
 	skb_pull(skb, hdr_size);
 
-	if (pkt->hard.dest == 0)
+	if (pkt->hard.dest == 0) {
 		skb->pkt_type = PACKET_BROADCAST;
-	else if (dev->flags & IFF_PROMISC) {
+	} else if (dev->flags & IFF_PROMISC) {
 		/* if we're not sending to ourselves :) */
 		if (pkt->hard.dest != dev->dev_addr[0])
 			skb->pkt_type = PACKET_OTHERHOST;
@@ -129,7 +128,6 @@ static __be16 type_trans(struct sk_buff *skb, struct net_device *dev)
 	return htons(ETH_P_IP);
 }
 
-
 /* packet receiver */
 static void rx(struct net_device *dev, int bufnum,
 	       struct archdr *pkthdr, int length)
@@ -141,7 +139,8 @@ static void rx(struct net_device *dev, int bufnum,
 	int saddr = pkt->hard.source, ofs;
 	struct Incoming *in = &lp->rfc1201.incoming[saddr];
 
-	BUGMSG(D_DURING, "it's an RFC1201 packet (length=%d)\n", length);
+	arc_printk(D_DURING, dev, "it's an RFC1201 packet (length=%d)\n",
+		   length);
 
 	if (length >= MinTU)
 		ofs = 512 - length;
@@ -149,11 +148,11 @@ static void rx(struct net_device *dev, int bufnum,
 		ofs = 256 - length;
 
 	if (soft->split_flag == 0xFF) {		/* Exception Packet */
-		if (length >= 4 + RFC1201_HDR_SIZE)
-			BUGMSG(D_DURING, "compensating for exception packet\n");
-		else {
-			BUGMSG(D_EXTRA, "short RFC1201 exception packet from %02Xh",
-			       saddr);
+		if (length >= 4 + RFC1201_HDR_SIZE) {
+			arc_printk(D_DURING, dev, "compensating for exception packet\n");
+		} else {
+			arc_printk(D_EXTRA, dev, "short RFC1201 exception packet from %02Xh",
+				   saddr);
 			return;
 		}
 
@@ -164,12 +163,13 @@ static void rx(struct net_device *dev, int bufnum,
 				      soft, sizeof(pkt->soft));
 	}
 	if (!soft->split_flag) {	/* not split */
-		BUGMSG(D_RX, "incoming is not split (splitflag=%d)\n",
-		       soft->split_flag);
+		arc_printk(D_RX, dev, "incoming is not split (splitflag=%d)\n",
+			   soft->split_flag);
 
 		if (in->skb) {	/* already assembling one! */
-			BUGMSG(D_EXTRA, "aborting assembly (seq=%d) for unsplit packet (splitflag=%d, seq=%d)\n",
-			 in->sequence, soft->split_flag, soft->sequence);
+			arc_printk(D_EXTRA, dev, "aborting assembly (seq=%d) for unsplit packet (splitflag=%d, seq=%d)\n",
+				   in->sequence, soft->split_flag,
+				   soft->sequence);
 			lp->rfc1201.aborted_seq = soft->sequence;
 			dev_kfree_skb_irq(in->skb);
 			dev->stats.rx_errors++;
@@ -179,82 +179,86 @@ static void rx(struct net_device *dev, int bufnum,
 		in->sequence = soft->sequence;
 
 		skb = alloc_skb(length + ARC_HDR_SIZE, GFP_ATOMIC);
-		if (skb == NULL) {
-			BUGMSG(D_NORMAL, "Memory squeeze, dropping packet.\n");
+		if (!skb) {
 			dev->stats.rx_dropped++;
 			return;
 		}
 		skb_put(skb, length + ARC_HDR_SIZE);
 		skb->dev = dev;
 
-		pkt = (struct archdr *) skb->data;
+		pkt = (struct archdr *)skb->data;
 		soft = &pkt->soft.rfc1201;
 
-		/* up to sizeof(pkt->soft) has already been copied from the card */
+		/* up to sizeof(pkt->soft) has already
+		 * been copied from the card
+		 */
 		memcpy(pkt, pkthdr, sizeof(struct archdr));
 		if (length > sizeof(pkt->soft))
-			lp->hw.copy_from_card(dev, bufnum, ofs + sizeof(pkt->soft),
-				       pkt->soft.raw + sizeof(pkt->soft),
+			lp->hw.copy_from_card(dev, bufnum,
+					      ofs + sizeof(pkt->soft),
+					      pkt->soft.raw + sizeof(pkt->soft),
 					      length - sizeof(pkt->soft));
 
-		/*
-		 * ARP packets have problems when sent from some DOS systems: the
-		 * source address is always 0!  So we take the hardware source addr
-		 * (which is impossible to fumble) and insert it ourselves.
+		/* ARP packets have problems when sent from some DOS systems:
+		 * the source address is always 0!
+		 * So we take the hardware source addr (which is impossible
+		 * to fumble) and insert it ourselves.
 		 */
 		if (soft->proto == ARC_P_ARP) {
-			struct arphdr *arp = (struct arphdr *) soft->payload;
+			struct arphdr *arp = (struct arphdr *)soft->payload;
 
 			/* make sure addresses are the right length */
 			if (arp->ar_hln == 1 && arp->ar_pln == 4) {
-				uint8_t *cptr = (uint8_t *) arp + sizeof(struct arphdr);
+				uint8_t *cptr = (uint8_t *)arp + sizeof(struct arphdr);
 
 				if (!*cptr) {	/* is saddr = 00? */
-					BUGMSG(D_EXTRA,
-					       "ARP source address was 00h, set to %02Xh.\n",
-					       saddr);
+					arc_printk(D_EXTRA, dev,
+						   "ARP source address was 00h, set to %02Xh\n",
+						   saddr);
 					dev->stats.rx_crc_errors++;
 					*cptr = saddr;
 				} else {
-					BUGMSG(D_DURING, "ARP source address (%Xh) is fine.\n",
-					       *cptr);
+					arc_printk(D_DURING, dev, "ARP source address (%Xh) is fine.\n",
+						   *cptr);
 				}
 			} else {
-				BUGMSG(D_NORMAL, "funny-shaped ARP packet. (%Xh, %Xh)\n",
-				       arp->ar_hln, arp->ar_pln);
+				arc_printk(D_NORMAL, dev, "funny-shaped ARP packet. (%Xh, %Xh)\n",
+					   arp->ar_hln, arp->ar_pln);
 				dev->stats.rx_errors++;
 				dev->stats.rx_crc_errors++;
 			}
 		}
-		BUGLVL(D_SKB) arcnet_dump_skb(dev, skb, "rx");
+		if (BUGLVL(D_SKB))
+			arcnet_dump_skb(dev, skb, "rx");
 
 		skb->protocol = type_trans(skb, dev);
 		netif_rx(skb);
 	} else {		/* split packet */
-		/*
-		 * NOTE: MSDOS ARP packet correction should only need to apply to
-		 * unsplit packets, since ARP packets are so short.
+		/* NOTE: MSDOS ARP packet correction should only need to
+		 * apply to unsplit packets, since ARP packets are so short.
 		 *
-		 * My interpretation of the RFC1201 document is that if a packet is
-		 * received out of order, the entire assembly process should be
-		 * aborted.
+		 * My interpretation of the RFC1201 document is that if a
+		 * packet is received out of order, the entire assembly
+		 * process should be aborted.
 		 *
-		 * The RFC also mentions "it is possible for successfully received
-		 * packets to be retransmitted." As of 0.40 all previously received
-		 * packets are allowed, not just the most recent one.
+		 * The RFC also mentions "it is possible for successfully
+		 * received packets to be retransmitted." As of 0.40 all
+		 * previously received packets are allowed, not just the
+		 * most recent one.
 		 *
-		 * We allow multiple assembly processes, one for each ARCnet card
-		 * possible on the network.  Seems rather like a waste of memory,
-		 * but there's no other way to be reliable.
+		 * We allow multiple assembly processes, one for each
+		 * ARCnet card possible on the network.
+		 * Seems rather like a waste of memory, but there's no
+		 * other way to be reliable.
 		 */
 
-		BUGMSG(D_RX, "packet is split (splitflag=%d, seq=%d)\n",
-		       soft->split_flag, in->sequence);
+		arc_printk(D_RX, dev, "packet is split (splitflag=%d, seq=%d)\n",
+			   soft->split_flag, in->sequence);
 
 		if (in->skb && in->sequence != soft->sequence) {
-			BUGMSG(D_EXTRA, "wrong seq number (saddr=%d, expected=%d, seq=%d, splitflag=%d)\n",
-			       saddr, in->sequence, soft->sequence,
-			       soft->split_flag);
+			arc_printk(D_EXTRA, dev, "wrong seq number (saddr=%d, expected=%d, seq=%d, splitflag=%d)\n",
+				   saddr, in->sequence, soft->sequence,
+				   soft->split_flag);
 			dev_kfree_skb_irq(in->skb);
 			in->skb = NULL;
 			dev->stats.rx_errors++;
@@ -262,24 +266,23 @@ static void rx(struct net_device *dev, int bufnum,
 			in->lastpacket = in->numpackets = 0;
 		}
 		if (soft->split_flag & 1) {	/* first packet in split */
-			BUGMSG(D_RX, "brand new splitpacket (splitflag=%d)\n",
-			       soft->split_flag);
+			arc_printk(D_RX, dev, "brand new splitpacket (splitflag=%d)\n",
+				   soft->split_flag);
 			if (in->skb) {	/* already assembling one! */
-				BUGMSG(D_EXTRA, "aborting previous (seq=%d) assembly "
-				       "(splitflag=%d, seq=%d)\n",
-				       in->sequence, soft->split_flag,
-				       soft->sequence);
+				arc_printk(D_EXTRA, dev, "aborting previous (seq=%d) assembly (splitflag=%d, seq=%d)\n",
+					   in->sequence, soft->split_flag,
+					   soft->sequence);
 				dev->stats.rx_errors++;
 				dev->stats.rx_missed_errors++;
 				dev_kfree_skb_irq(in->skb);
 			}
 			in->sequence = soft->sequence;
-			in->numpackets = ((unsigned) soft->split_flag >> 1) + 2;
+			in->numpackets = ((unsigned)soft->split_flag >> 1) + 2;
 			in->lastpacket = 1;
 
 			if (in->numpackets > 16) {
-				BUGMSG(D_EXTRA, "incoming packet more than 16 segments; dropping. (splitflag=%d)\n",
-				       soft->split_flag);
+				arc_printk(D_EXTRA, dev, "incoming packet more than 16 segments; dropping. (splitflag=%d)\n",
+					   soft->split_flag);
 				lp->rfc1201.aborted_seq = soft->sequence;
 				dev->stats.rx_errors++;
 				dev->stats.rx_length_errors++;
@@ -287,14 +290,14 @@ static void rx(struct net_device *dev, int bufnum,
 			}
 			in->skb = skb = alloc_skb(508 * in->numpackets + ARC_HDR_SIZE,
 						  GFP_ATOMIC);
-			if (skb == NULL) {
-				BUGMSG(D_NORMAL, "(split) memory squeeze, dropping packet.\n");
+			if (!skb) {
+				arc_printk(D_NORMAL, dev, "(split) memory squeeze, dropping packet.\n");
 				lp->rfc1201.aborted_seq = soft->sequence;
 				dev->stats.rx_dropped++;
 				return;
 			}
 			skb->dev = dev;
-			pkt = (struct archdr *) skb->data;
+			pkt = (struct archdr *)skb->data;
 			soft = &pkt->soft.rfc1201;
 
 			memcpy(pkt, pkthdr, ARC_HDR_SIZE + RFC1201_HDR_SIZE);
@@ -302,37 +305,37 @@ static void rx(struct net_device *dev, int bufnum,
 
 			soft->split_flag = 0;	/* end result won't be split */
 		} else {	/* not first packet */
-			int packetnum = ((unsigned) soft->split_flag >> 1) + 1;
+			int packetnum = ((unsigned)soft->split_flag >> 1) + 1;
 
-			/*
-			 * if we're not assembling, there's no point trying to
+			/* if we're not assembling, there's no point trying to
 			 * continue.
 			 */
 			if (!in->skb) {
 				if (lp->rfc1201.aborted_seq != soft->sequence) {
-					BUGMSG(D_EXTRA, "can't continue split without starting "
-					       "first! (splitflag=%d, seq=%d, aborted=%d)\n",
-					soft->split_flag, soft->sequence,
-					       lp->rfc1201.aborted_seq);
+					arc_printk(D_EXTRA, dev, "can't continue split without starting first! (splitflag=%d, seq=%d, aborted=%d)\n",
+						   soft->split_flag,
+						   soft->sequence,
+						   lp->rfc1201.aborted_seq);
 					dev->stats.rx_errors++;
 					dev->stats.rx_missed_errors++;
 				}
 				return;
 			}
 			in->lastpacket++;
-			if (packetnum != in->lastpacket) {	/* not the right flag! */
+			/* if not the right flag */
+			if (packetnum != in->lastpacket) {
 				/* harmless duplicate? ignore. */
 				if (packetnum <= in->lastpacket - 1) {
-					BUGMSG(D_EXTRA, "duplicate splitpacket ignored! (splitflag=%d)\n",
-					       soft->split_flag);
+					arc_printk(D_EXTRA, dev, "duplicate splitpacket ignored! (splitflag=%d)\n",
+						   soft->split_flag);
 					dev->stats.rx_errors++;
 					dev->stats.rx_frame_errors++;
 					return;
 				}
 				/* "bad" duplicate, kill reassembly */
-				BUGMSG(D_EXTRA, "out-of-order splitpacket, reassembly "
-				       "(seq=%d) aborted (splitflag=%d, seq=%d)\n",
-				       in->sequence, soft->split_flag, soft->sequence);
+				arc_printk(D_EXTRA, dev, "out-of-order splitpacket, reassembly (seq=%d) aborted (splitflag=%d, seq=%d)\n",
+					   in->sequence, soft->split_flag,
+					   soft->sequence);
 				lp->rfc1201.aborted_seq = soft->sequence;
 				dev_kfree_skb_irq(in->skb);
 				in->skb = NULL;
@@ -341,7 +344,7 @@ static void rx(struct net_device *dev, int bufnum,
 				in->lastpacket = in->numpackets = 0;
 				return;
 			}
-			pkt = (struct archdr *) in->skb->data;
+			pkt = (struct archdr *)in->skb->data;
 			soft = &pkt->soft.rfc1201;
 		}
 
@@ -357,11 +360,12 @@ static void rx(struct net_device *dev, int bufnum,
 			in->skb = NULL;
 			in->lastpacket = in->numpackets = 0;
 
-	    BUGMSG(D_SKB_SIZE, "skb: received %d bytes from %02X (unsplit)\n",
-    		skb->len, pkt->hard.source);
-	    BUGMSG(D_SKB_SIZE, "skb: received %d bytes from %02X (split)\n",
-    		skb->len, pkt->hard.source);
-			BUGLVL(D_SKB) arcnet_dump_skb(dev, skb, "rx");
+			arc_printk(D_SKB_SIZE, dev, "skb: received %d bytes from %02X (unsplit)\n",
+				   skb->len, pkt->hard.source);
+			arc_printk(D_SKB_SIZE, dev, "skb: received %d bytes from %02X (split)\n",
+				   skb->len, pkt->hard.source);
+			if (BUGLVL(D_SKB))
+				arcnet_dump_skb(dev, skb, "rx");
 
 			skb->protocol = type_trans(skb, dev);
 			netif_rx(skb);
@@ -369,14 +373,13 @@ static void rx(struct net_device *dev, int bufnum,
 	}
 }
 
-
 /* Create the ARCnet hard/soft headers for RFC1201. */
 static int build_header(struct sk_buff *skb, struct net_device *dev,
 			unsigned short type, uint8_t daddr)
 {
 	struct arcnet_local *lp = netdev_priv(dev);
 	int hdr_size = ARC_HDR_SIZE + RFC1201_HDR_SIZE;
-	struct archdr *pkt = (struct archdr *) skb_push(skb, hdr_size);
+	struct archdr *pkt = (struct archdr *)skb_push(skb, hdr_size);
 	struct arc_rfc1201 *soft = &pkt->soft.rfc1201;
 
 	/* set the protocol ID according to RFC1201 */
@@ -402,19 +405,18 @@ static int build_header(struct sk_buff *skb, struct net_device *dev,
 		soft->proto = ARC_P_ATALK;
 		break;
 	default:
-		BUGMSG(D_NORMAL, "RFC1201: I don't understand protocol %d (%Xh)\n",
-		       type, type);
+		arc_printk(D_NORMAL, dev, "RFC1201: I don't understand protocol %d (%Xh)\n",
+			   type, type);
 		dev->stats.tx_errors++;
 		dev->stats.tx_aborted_errors++;
 		return 0;
 	}
 
-	/*
-	 * Set the source hardware address.
+	/* Set the source hardware address.
 	 *
 	 * This is pretty pointless for most purposes, but it can help in
-	 * debugging.  ARCnet does not allow us to change the source address in
-	 * the actual packet sent)
+	 * debugging.  ARCnet does not allow us to change the source address
+	 * in the actual packet sent.
 	 */
 	pkt->hard.source = *dev->dev_addr;
 
@@ -424,10 +426,10 @@ static int build_header(struct sk_buff *skb, struct net_device *dev,
 	/* see linux/net/ethernet/eth.c to see where I got the following */
 
 	if (dev->flags & (IFF_LOOPBACK | IFF_NOARP)) {
-		/* 
-		 * FIXME: fill in the last byte of the dest ipaddr here to better
-		 * comply with RFC1051 in "noarp" mode.  For now, always broadcasting
-		 * will probably at least get packets sent out :)
+		/* FIXME: fill in the last byte of the dest ipaddr here
+		 * to better comply with RFC1051 in "noarp" mode.
+		 * For now, always broadcasting will probably at least get
+		 * packets sent out :)
 		 */
 		pkt->hard.dest = 0;
 		return hdr_size;
@@ -437,7 +439,6 @@ static int build_header(struct sk_buff *skb, struct net_device *dev,
 	return hdr_size;
 }
 
-
 static void load_pkt(struct net_device *dev, struct arc_hardware *hard,
 		     struct arc_rfc1201 *soft, int softlen, int bufnum)
 {
@@ -461,8 +462,9 @@ static void load_pkt(struct net_device *dev, struct arc_hardware *hard,
 		hard->offset[1] = ofs - RFC1201_HDR_SIZE;
 		lp->hw.copy_to_card(dev, bufnum, ofs - RFC1201_HDR_SIZE,
 				    &excsoft, RFC1201_HDR_SIZE);
-	} else
+	} else {
 		hard->offset[0] = ofs = 256 - softlen;
+	}
 
 	lp->hw.copy_to_card(dev, bufnum, 0, hard, ARC_HDR_SIZE);
 	lp->hw.copy_to_card(dev, bufnum, ofs, soft, softlen);
@@ -470,7 +472,6 @@ static void load_pkt(struct net_device *dev, struct arc_hardware *hard,
 	lp->lastload_dest = hard->dest;
 }
 
-
 static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length,
 		      int bufnum)
 {
@@ -478,11 +479,11 @@ static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length,
 	const int maxsegsize = XMTU - RFC1201_HDR_SIZE;
 	struct Outgoing *out;
 
+	arc_printk(D_DURING, dev, "prepare_tx: txbufs=%d/%d/%d\n",
+		   lp->next_tx, lp->cur_tx, bufnum);
 
-	BUGMSG(D_DURING, "prepare_tx: txbufs=%d/%d/%d\n",
-	       lp->next_tx, lp->cur_tx, bufnum);
-
-	length -= ARC_HDR_SIZE;	/* hard header is not included in packet length */
+	/* hard header is not included in packet length */
+	length -= ARC_HDR_SIZE;
 	pkt->soft.rfc1201.split_flag = 0;
 
 	/* need to do a split packet? */
@@ -494,9 +495,9 @@ static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length,
 		out->numsegs = (out->dataleft + maxsegsize - 1) / maxsegsize;
 		out->segnum = 0;
 
-		BUGMSG(D_DURING, "rfc1201 prep_tx: ready for %d-segment split "
-		       "(%d bytes, seq=%d)\n", out->numsegs, out->length,
-		       pkt->soft.rfc1201.sequence);
+		arc_printk(D_DURING, dev, "rfc1201 prep_tx: ready for %d-segment split (%d bytes, seq=%d)\n",
+			   out->numsegs, out->length,
+			   pkt->soft.rfc1201.sequence);
 
 		return 0;	/* not done */
 	}
@@ -506,7 +507,6 @@ static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length,
 	return 1;		/* done */
 }
 
-
 static int continue_tx(struct net_device *dev, int bufnum)
 {
 	struct arcnet_local *lp = netdev_priv(dev);
@@ -516,9 +516,9 @@ static int continue_tx(struct net_device *dev, int bufnum)
 	int maxsegsize = XMTU - RFC1201_HDR_SIZE;
 	int seglen;
 
-	BUGMSG(D_DURING,
-	  "rfc1201 continue_tx: loading segment %d(+1) of %d (seq=%d)\n",
-	       out->segnum, out->numsegs, soft->sequence);
+	arc_printk(D_DURING, dev,
+		   "rfc1201 continue_tx: loading segment %d(+1) of %d (seq=%d)\n",
+		   out->segnum, out->numsegs, soft->sequence);
 
 	/* the "new" soft header comes right before the data chunk */
 	newsoft = (struct arc_rfc1201 *)

include/uapi/linux/if_arcnet.h

@@ -19,7 +19,6 @@
 #include <linux/types.h>
 #include <linux/if_ether.h>
 
-
 /*
  *    These are the defined ARCnet Protocol ID's.
  */
@@ -57,42 +56,40 @@
  * The RFC1201-specific components of an arcnet packet header.
  */
 struct arc_rfc1201 {
-    __u8  proto;		/* protocol ID field - varies		*/
-    __u8  split_flag;	/* for use with split packets		*/
-    __be16   sequence;		/* sequence number			*/
-    __u8  payload[0];	/* space remaining in packet (504 bytes)*/
+	__u8  proto;		/* protocol ID field - varies		*/
+	__u8  split_flag;	/* for use with split packets		*/
+	__be16   sequence;	/* sequence number			*/
+	__u8  payload[0];	/* space remaining in packet (504 bytes)*/
 };
 #define RFC1201_HDR_SIZE 4
 
-
 /*
  * The RFC1051-specific components.
  */
 struct arc_rfc1051 {
-    __u8 proto;		/* ARC_P_RFC1051_ARP/RFC1051_IP	*/
-    __u8 payload[0];		/* 507 bytes			*/
+	__u8 proto;		/* ARC_P_RFC1051_ARP/RFC1051_IP	*/
+	__u8 payload[0];	/* 507 bytes			*/
 };
 #define RFC1051_HDR_SIZE 1
 
-
 /*
  * The ethernet-encap-specific components.  We have a real ethernet header
  * and some data.
  */
 struct arc_eth_encap {
-    __u8 proto;		/* Always ARC_P_ETHER			*/
-    struct ethhdr eth;		/* standard ethernet header (yuck!)	*/
-    __u8 payload[0];		/* 493 bytes				*/
+	__u8 proto;		/* Always ARC_P_ETHER			*/
+	struct ethhdr eth;	/* standard ethernet header (yuck!)	*/
+	__u8 payload[0];	/* 493 bytes				*/
 };
 #define ETH_ENCAP_HDR_SIZE 14
 
-
 struct arc_cap {
 	__u8 proto;
-	__u8 cookie[sizeof(int)];   /* Actually NOT sent over the network */
+	__u8 cookie[sizeof(int)];
+				/* Actually NOT sent over the network */
 	union {
 		__u8 ack;
-		__u8 raw[0];		/* 507 bytes */
+		__u8 raw[0];	/* 507 bytes */
 	} mes;
 };
 
@@ -105,9 +102,9 @@ struct arc_cap {
  * driver.
  */
 struct arc_hardware {
-    __u8  source,		/* source ARCnet - filled in automagically */
-             dest,		/* destination ARCnet - 0 for broadcast    */
-    	     offset[2];		/* offset bytes (some weird semantics)     */
+	__u8 source;		/* source ARCnet - filled in automagically */
+	__u8 dest;		/* destination ARCnet - 0 for broadcast    */
+	__u8 offset[2];		/* offset bytes (some weird semantics)     */
 };
 #define ARC_HDR_SIZE 4
 
@@ -116,17 +113,17 @@ struct arc_hardware {
  * when you do a raw packet capture).
  */
 struct archdr {
-    /* hardware requirements */
-    struct arc_hardware hard;
-     
-    /* arcnet encapsulation-specific bits */
-    union {
-	struct arc_rfc1201   rfc1201;
-	struct arc_rfc1051   rfc1051;
-	struct arc_eth_encap eth_encap;
-	struct arc_cap       cap;
-	__u8 raw[0];		/* 508 bytes				*/
-    } soft;
+	/* hardware requirements */
+	struct arc_hardware hard;
+
+	/* arcnet encapsulation-specific bits */
+	union {
+		struct arc_rfc1201   rfc1201;
+		struct arc_rfc1051   rfc1051;
+		struct arc_eth_encap eth_encap;
+		struct arc_cap       cap;
+		__u8 raw[0];	/* 508 bytes				*/
+	} soft;
 };
 
 #endif				/* _LINUX_IF_ARCNET_H */