net: dsa: bcm_sf2: Configure traffic classes to queue mapping

By default, all traffic goes to queue 0, re-configure the traffic
classes to quality of service mapping such that priority X maps to queue
X, where X is from 0 through 7.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/dsa/bcm_sf2.c

@@ -229,6 +229,7 @@ static int bcm_sf2_port_setup(struct dsa_switch *ds, int port,
 {
 	struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
 	s8 cpu_port = ds->dst[ds->index].cpu_port;
+	unsigned int i;
 	u32 reg;
 
 	/* Clear the memory power down */
@@ -240,6 +241,14 @@ static int bcm_sf2_port_setup(struct dsa_switch *ds, int port,
 	if (priv->brcm_tag_mask & BIT(port))
 		bcm_sf2_brcm_hdr_setup(priv, port);
 
+	/* Configure Traffic Class to QoS mapping, allow each priority to map
+	 * to a different queue number
+	 */
+	reg = core_readl(priv, CORE_PORT_TC2_QOS_MAP_PORT(port));
+	for (i = 0; i < 8; i++)
+		reg |= i << (PRT_TO_QID_SHIFT * i);
+	core_writel(priv, reg, CORE_PORT_TC2_QOS_MAP_PORT(port));
+
 	/* Clear the Rx and Tx disable bits and set to no spanning tree */
 	core_writel(priv, 0, CORE_G_PCTL_PORT(port));
 

drivers/net/dsa/bcm_sf2_regs.h

@@ -238,6 +238,10 @@ enum bcm_sf2_reg_offs {
 #define  P_TXQ_PSM_VDD(x)		(P_TXQ_PSM_VDD_MASK << \
 					((x) * P_TXQ_PSM_VDD_SHIFT))
 
+#define CORE_PORT_TC2_QOS_MAP_PORT(x)	(0xc1c0 + ((x) * 0x10))
+#define  PRT_TO_QID_MASK		0x3
+#define  PRT_TO_QID_SHIFT		3
+
 #define CORE_PORT_VLAN_CTL_PORT(x)	(0xc400 + ((x) * 0x8))
 #define  PORT_VLAN_CTRL_MASK		0x1ff