usb: isp1760: Reorganize header files

The isp1760-rhcd.h header contains PTD constants and structures only
useful for the HCD implementation. It also contains register definitions
that will be needed by common code when implementing support for the
ISP1761 device controller, but doesn't contain the isp1760_hcd structure
definition that will also be used by common code.

Move definitions to the right location and create an isp1760-regs.h to
store register definitions. No change other than moving definitions and
modifying indentation is performed.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

drivers/usb/host/isp1760-hcd.c

@@ -27,41 +27,12 @@
 #include <asm/cacheflush.h>
 
 #include "isp1760-hcd.h"
+#include "isp1760-regs.h"
 
 static struct kmem_cache *qtd_cachep;
 static struct kmem_cache *qh_cachep;
 static struct kmem_cache *urb_listitem_cachep;
 
-enum queue_head_types {
-	QH_CONTROL,
-	QH_BULK,
-	QH_INTERRUPT,
-	QH_END
-};
-
-struct isp1760_hcd {
-	struct usb_hcd		*hcd;
-
-	u32 hcs_params;
-	spinlock_t		lock;
-	struct isp1760_slotinfo	atl_slots[32];
-	int			atl_done_map;
-	struct isp1760_slotinfo	int_slots[32];
-	int			int_done_map;
-	struct isp1760_memory_chunk memory_pool[BLOCKS];
-	struct list_head	qh_list[QH_END];
-
-	/* periodic schedule support */
-#define	DEFAULT_I_TDPS		1024
-	unsigned		periodic_size;
-	unsigned		i_thresh;
-	unsigned long		reset_done;
-	unsigned long		next_statechange;
-	unsigned int		devflags;
-
-	struct gpio_desc	*rst_gpio;
-};
-
 typedef void (packet_enqueue)(struct usb_hcd *hcd, struct isp1760_qh *qh,
 		struct isp1760_qtd *qtd);
 
@@ -70,32 +41,79 @@ static inline struct isp1760_hcd *hcd_to_priv(struct usb_hcd *hcd)
 	return *(struct isp1760_hcd **)hcd->hcd_priv;
 }
 
-/* Section 2.2 Host Controller Capability Registers */
-#define HC_LENGTH(p)		(((p)>>00)&0x00ff)	/* bits 7:0 */
-#define HC_VERSION(p)		(((p)>>16)&0xffff)	/* bits 31:16 */
-#define HCS_INDICATOR(p)	((p)&(1 << 16))	/* true: has port indicators */
-#define HCS_PPC(p)		((p)&(1 << 4))	/* true: port power control */
-#define HCS_N_PORTS(p)		(((p)>>0)&0xf)	/* bits 3:0, ports on HC */
-#define HCC_ISOC_CACHE(p)       ((p)&(1 << 7))  /* true: can cache isoc frame */
-#define HCC_ISOC_THRES(p)       (((p)>>4)&0x7)  /* bits 6:4, uframes cached */
-
-/* Section 2.3 Host Controller Operational Registers */
-#define CMD_LRESET	(1<<7)		/* partial reset (no ports, etc) */
-#define CMD_RESET	(1<<1)		/* reset HC not bus */
-#define CMD_RUN		(1<<0)		/* start/stop HC */
-#define STS_PCD		(1<<2)		/* port change detect */
-#define FLAG_CF		(1<<0)		/* true: we'll support "high speed" */
-
-#define PORT_OWNER	(1<<13)		/* true: companion hc owns this port */
-#define PORT_POWER	(1<<12)		/* true: has power (see PPC) */
-#define PORT_USB11(x) (((x) & (3 << 10)) == (1 << 10))	/* USB 1.1 device */
-#define PORT_RESET	(1<<8)		/* reset port */
-#define PORT_SUSPEND	(1<<7)		/* suspend port */
-#define PORT_RESUME	(1<<6)		/* resume it */
-#define PORT_PE		(1<<2)		/* port enable */
-#define PORT_CSC	(1<<1)		/* connect status change */
-#define PORT_CONNECT	(1<<0)		/* device connected */
-#define PORT_RWC_BITS   (PORT_CSC)
+/* urb state*/
+#define DELETE_URB		(0x0008)
+#define NO_TRANSFER_ACTIVE	(0xffffffff)
+
+/* Philips Proprietary Transfer Descriptor (PTD) */
+typedef __u32 __bitwise __dw;
+struct ptd {
+	__dw dw0;
+	__dw dw1;
+	__dw dw2;
+	__dw dw3;
+	__dw dw4;
+	__dw dw5;
+	__dw dw6;
+	__dw dw7;
+};
+#define PTD_OFFSET		0x0400
+#define ISO_PTD_OFFSET		0x0400
+#define INT_PTD_OFFSET		0x0800
+#define ATL_PTD_OFFSET		0x0c00
+#define PAYLOAD_OFFSET		0x1000
+
+
+/* ATL */
+/* DW0 */
+#define DW0_VALID_BIT			1
+#define FROM_DW0_VALID(x)		((x) & 0x01)
+#define TO_DW0_LENGTH(x)		(((u32) x) << 3)
+#define TO_DW0_MAXPACKET(x)		(((u32) x) << 18)
+#define TO_DW0_MULTI(x)			(((u32) x) << 29)
+#define TO_DW0_ENDPOINT(x)		(((u32)	x) << 31)
+/* DW1 */
+#define TO_DW1_DEVICE_ADDR(x)		(((u32) x) << 3)
+#define TO_DW1_PID_TOKEN(x)		(((u32) x) << 10)
+#define DW1_TRANS_BULK			((u32) 2 << 12)
+#define DW1_TRANS_INT			((u32) 3 << 12)
+#define DW1_TRANS_SPLIT			((u32) 1 << 14)
+#define DW1_SE_USB_LOSPEED		((u32) 2 << 16)
+#define TO_DW1_PORT_NUM(x)		(((u32) x) << 18)
+#define TO_DW1_HUB_NUM(x)		(((u32) x) << 25)
+/* DW2 */
+#define TO_DW2_DATA_START_ADDR(x)	(((u32) x) << 8)
+#define TO_DW2_RL(x)			((x) << 25)
+#define FROM_DW2_RL(x)			(((x) >> 25) & 0xf)
+/* DW3 */
+#define FROM_DW3_NRBYTESTRANSFERRED(x)		((x) & 0x7fff)
+#define FROM_DW3_SCS_NRBYTESTRANSFERRED(x)	((x) & 0x07ff)
+#define TO_DW3_NAKCOUNT(x)		((x) << 19)
+#define FROM_DW3_NAKCOUNT(x)		(((x) >> 19) & 0xf)
+#define TO_DW3_CERR(x)			((x) << 23)
+#define FROM_DW3_CERR(x)		(((x) >> 23) & 0x3)
+#define TO_DW3_DATA_TOGGLE(x)		((x) << 25)
+#define FROM_DW3_DATA_TOGGLE(x)		(((x) >> 25) & 0x1)
+#define TO_DW3_PING(x)			((x) << 26)
+#define FROM_DW3_PING(x)		(((x) >> 26) & 0x1)
+#define DW3_ERROR_BIT			(1 << 28)
+#define DW3_BABBLE_BIT			(1 << 29)
+#define DW3_HALT_BIT			(1 << 30)
+#define DW3_ACTIVE_BIT			(1 << 31)
+#define FROM_DW3_ACTIVE(x)		(((x) >> 31) & 0x01)
+
+#define INT_UNDERRUN			(1 << 2)
+#define INT_BABBLE			(1 << 1)
+#define INT_EXACT			(1 << 0)
+
+#define SETUP_PID	(2)
+#define IN_PID		(1)
+#define OUT_PID		(0)
+
+/* Errata 1 */
+#define RL_COUNTER	(0)
+#define NAK_COUNTER	(0)
+#define ERR_COUNTER	(2)
 
 struct isp1760_qtd {
 	u8 packet_type;

drivers/usb/host/isp1760-hcd.h

@@ -1,114 +1,31 @@
 #ifndef _ISP1760_HCD_H_
 #define _ISP1760_HCD_H_
 
-/* exports for if */
-int isp1760_register(struct resource *mem, int irq, unsigned long irqflags,
-		     struct device *dev, unsigned int devflags);
-void isp1760_unregister(struct device *dev);
+#include <linux/spinlock.h>
 
-int isp1760_init_kmem_once(void);
-void isp1760_deinit_kmem_cache(void);
+struct gpio_desc;
+struct isp1760_qh;
+struct isp1760_qtd;
+struct resource;
+struct usb_hcd;
 
-/* EHCI capability registers */
-#define HC_CAPLENGTH		0x00
-#define HC_HCSPARAMS		0x04
-#define HC_HCCPARAMS		0x08
-
-/* EHCI operational registers */
-#define HC_USBCMD		0x20
-#define HC_USBSTS		0x24
-#define HC_FRINDEX		0x2c
-#define HC_CONFIGFLAG		0x60
-#define HC_PORTSC1		0x64
-#define HC_ISO_PTD_DONEMAP_REG	0x130
-#define HC_ISO_PTD_SKIPMAP_REG	0x134
-#define HC_ISO_PTD_LASTPTD_REG	0x138
-#define HC_INT_PTD_DONEMAP_REG	0x140
-#define HC_INT_PTD_SKIPMAP_REG	0x144
-#define HC_INT_PTD_LASTPTD_REG	0x148
-#define HC_ATL_PTD_DONEMAP_REG	0x150
-#define HC_ATL_PTD_SKIPMAP_REG	0x154
-#define HC_ATL_PTD_LASTPTD_REG	0x158
-
-/* Configuration Register */
-#define HC_HW_MODE_CTRL		0x300
-#define ALL_ATX_RESET		(1 << 31)
-#define HW_ANA_DIGI_OC		(1 << 15)
-#define HW_DATA_BUS_32BIT	(1 << 8)
-#define HW_DACK_POL_HIGH	(1 << 6)
-#define HW_DREQ_POL_HIGH	(1 << 5)
-#define HW_INTR_HIGH_ACT	(1 << 2)
-#define HW_INTR_EDGE_TRIG	(1 << 1)
-#define HW_GLOBAL_INTR_EN	(1 << 0)
-
-#define HC_CHIP_ID_REG		0x304
-#define HC_SCRATCH_REG		0x308
-
-#define HC_RESET_REG		0x30c
-#define SW_RESET_RESET_HC	(1 << 1)
-#define SW_RESET_RESET_ALL	(1 << 0)
-
-#define HC_BUFFER_STATUS_REG	0x334
-#define ISO_BUF_FILL		(1 << 2)
-#define INT_BUF_FILL		(1 << 1)
-#define ATL_BUF_FILL		(1 << 0)
-
-#define HC_MEMORY_REG		0x33c
-#define ISP_BANK(x)		((x) << 16)
-
-#define HC_PORT1_CTRL		0x374
-#define PORT1_POWER		(3 << 3)
-#define PORT1_INIT1		(1 << 7)
-#define PORT1_INIT2		(1 << 23)
-#define HW_OTG_CTRL_SET		0x374
-#define HW_OTG_CTRL_CLR		0x376
-
-/* Interrupt Register */
-#define HC_INTERRUPT_REG	0x310
-
-#define HC_INTERRUPT_ENABLE	0x314
-#define HC_ISO_INT		(1 << 9)
-#define HC_ATL_INT		(1 << 8)
-#define HC_INTL_INT		(1 << 7)
-#define HC_EOT_INT		(1 << 3)
-#define HC_SOT_INT		(1 << 1)
-#define INTERRUPT_ENABLE_MASK	(HC_INTL_INT | HC_ATL_INT)
-
-#define HC_ISO_IRQ_MASK_OR_REG	0x318
-#define HC_INT_IRQ_MASK_OR_REG	0x31C
-#define HC_ATL_IRQ_MASK_OR_REG	0x320
-#define HC_ISO_IRQ_MASK_AND_REG	0x324
-#define HC_INT_IRQ_MASK_AND_REG	0x328
-#define HC_ATL_IRQ_MASK_AND_REG	0x32C
-
-/* urb state*/
-#define DELETE_URB		(0x0008)
-#define NO_TRANSFER_ACTIVE	(0xffffffff)
-
-/* Philips Proprietary Transfer Descriptor (PTD) */
-typedef __u32 __bitwise __dw;
-struct ptd {
-	__dw dw0;
-	__dw dw1;
-	__dw dw2;
-	__dw dw3;
-	__dw dw4;
-	__dw dw5;
-	__dw dw6;
-	__dw dw7;
-};
-#define PTD_OFFSET		0x0400
-#define ISO_PTD_OFFSET		0x0400
-#define INT_PTD_OFFSET		0x0800
-#define ATL_PTD_OFFSET		0x0c00
-#define PAYLOAD_OFFSET		0x1000
+/*
+ * 60kb divided in:
+ * - 32 blocks @ 256  bytes
+ * - 20 blocks @ 1024 bytes
+ * -  4 blocks @ 8192 bytes
+ */
 
-struct isp1760_slotinfo {
-	struct isp1760_qh *qh;
-	struct isp1760_qtd *qtd;
-	unsigned long timestamp;
-};
+#define BLOCK_1_NUM 32
+#define BLOCK_2_NUM 20
+#define BLOCK_3_NUM 4
 
+#define BLOCK_1_SIZE 256
+#define BLOCK_2_SIZE 1024
+#define BLOCK_3_SIZE 8192
+#define BLOCKS (BLOCK_1_NUM + BLOCK_2_NUM + BLOCK_3_NUM)
+#define MAX_PAYLOAD_SIZE BLOCK_3_SIZE
+#define PAYLOAD_AREA_SIZE 0xf000
 
 /*
  * Device flags that can vary from board to board.  All of these
@@ -124,6 +41,12 @@ struct isp1760_slotinfo {
 #define ISP1760_FLAG_INTR_POL_HIGH	0x00000080 /* Interrupt polarity active high */
 #define ISP1760_FLAG_INTR_EDGE_TRIG	0x00000100 /* Interrupt edge triggered */
 
+struct isp1760_slotinfo {
+	struct isp1760_qh *qh;
+	struct isp1760_qtd *qtd;
+	unsigned long timestamp;
+};
+
 /* chip memory management */
 struct isp1760_memory_chunk {
 	unsigned int start;
@@ -131,73 +54,42 @@ struct isp1760_memory_chunk {
 	unsigned int free;
 };
 
-/*
- * 60kb divided in:
- * - 32 blocks @ 256  bytes
- * - 20 blocks @ 1024 bytes
- * -  4 blocks @ 8192 bytes
- */
+enum isp1760_queue_head_types {
+	QH_CONTROL,
+	QH_BULK,
+	QH_INTERRUPT,
+	QH_END
+};
 
-#define BLOCK_1_NUM 32
-#define BLOCK_2_NUM 20
-#define BLOCK_3_NUM 4
+struct isp1760_hcd {
+	struct usb_hcd		*hcd;
+
+	u32 hcs_params;
+	spinlock_t		lock;
+	struct isp1760_slotinfo	atl_slots[32];
+	int			atl_done_map;
+	struct isp1760_slotinfo	int_slots[32];
+	int			int_done_map;
+	struct isp1760_memory_chunk memory_pool[BLOCKS];
+	struct list_head	qh_list[QH_END];
+
+	/* periodic schedule support */
+#define	DEFAULT_I_TDPS		1024
+	unsigned		periodic_size;
+	unsigned		i_thresh;
+	unsigned long		reset_done;
+	unsigned long		next_statechange;
+	unsigned int		devflags;
+
+	struct gpio_desc	*rst_gpio;
+};
 
-#define BLOCK_1_SIZE 256
-#define BLOCK_2_SIZE 1024
-#define BLOCK_3_SIZE 8192
-#define BLOCKS (BLOCK_1_NUM + BLOCK_2_NUM + BLOCK_3_NUM)
-#define MAX_PAYLOAD_SIZE BLOCK_3_SIZE
-#define PAYLOAD_AREA_SIZE 0xf000
+/* exports for if */
+int isp1760_register(struct resource *mem, int irq, unsigned long irqflags,
+		     struct device *dev, unsigned int devflags);
+void isp1760_unregister(struct device *dev);
 
-/* ATL */
-/* DW0 */
-#define DW0_VALID_BIT			1
-#define FROM_DW0_VALID(x)		((x) & 0x01)
-#define TO_DW0_LENGTH(x)		(((u32) x) << 3)
-#define TO_DW0_MAXPACKET(x)		(((u32) x) << 18)
-#define TO_DW0_MULTI(x)			(((u32) x) << 29)
-#define TO_DW0_ENDPOINT(x)		(((u32)	x) << 31)
-/* DW1 */
-#define TO_DW1_DEVICE_ADDR(x)		(((u32) x) << 3)
-#define TO_DW1_PID_TOKEN(x)		(((u32) x) << 10)
-#define DW1_TRANS_BULK			((u32) 2 << 12)
-#define DW1_TRANS_INT			((u32) 3 << 12)
-#define DW1_TRANS_SPLIT			((u32) 1 << 14)
-#define DW1_SE_USB_LOSPEED		((u32) 2 << 16)
-#define TO_DW1_PORT_NUM(x)		(((u32) x) << 18)
-#define TO_DW1_HUB_NUM(x)		(((u32) x) << 25)
-/* DW2 */
-#define TO_DW2_DATA_START_ADDR(x)	(((u32) x) << 8)
-#define TO_DW2_RL(x)			((x) << 25)
-#define FROM_DW2_RL(x)			(((x) >> 25) & 0xf)
-/* DW3 */
-#define FROM_DW3_NRBYTESTRANSFERRED(x)		((x) & 0x7fff)
-#define FROM_DW3_SCS_NRBYTESTRANSFERRED(x)	((x) & 0x07ff)
-#define TO_DW3_NAKCOUNT(x)		((x) << 19)
-#define FROM_DW3_NAKCOUNT(x)		(((x) >> 19) & 0xf)
-#define TO_DW3_CERR(x)			((x) << 23)
-#define FROM_DW3_CERR(x)		(((x) >> 23) & 0x3)
-#define TO_DW3_DATA_TOGGLE(x)		((x) << 25)
-#define FROM_DW3_DATA_TOGGLE(x)		(((x) >> 25) & 0x1)
-#define TO_DW3_PING(x)			((x) << 26)
-#define FROM_DW3_PING(x)		(((x) >> 26) & 0x1)
-#define DW3_ERROR_BIT			(1 << 28)
-#define DW3_BABBLE_BIT			(1 << 29)
-#define DW3_HALT_BIT			(1 << 30)
-#define DW3_ACTIVE_BIT			(1 << 31)
-#define FROM_DW3_ACTIVE(x)		(((x) >> 31) & 0x01)
-
-#define INT_UNDERRUN			(1 << 2)
-#define INT_BABBLE			(1 << 1)
-#define INT_EXACT			(1 << 0)
-
-#define SETUP_PID	(2)
-#define IN_PID		(1)
-#define OUT_PID		(0)
-
-/* Errata 1 */
-#define RL_COUNTER	(0)
-#define NAK_COUNTER	(0)
-#define ERR_COUNTER	(2)
+int isp1760_init_kmem_once(void);
+void isp1760_deinit_kmem_cache(void);
 
 #endif /* _ISP1760_HCD_H_ */

drivers/usb/host/isp1760-if.c

@@ -19,6 +19,7 @@
 #include <linux/usb/hcd.h>
 
 #include "isp1760-hcd.h"
+#include "isp1760-regs.h"
 
 #ifdef CONFIG_PCI
 #include <linux/pci.h>

drivers/usb/host/isp1760-regs.h

@@ -0,0 +1,120 @@
+/*
+ * Driver for the NXP ISP1760 chip
+ *
+ * Copyright 2014 Laurent Pinchart
+ * Copyright 2007 Sebastian Siewior
+ *
+ * Contacts:
+ *     Sebastian Siewior <bigeasy@linutronix.de>
+ *     Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ */
+
+#ifndef _ISP1760_REGS_H_
+#define _ISP1760_REGS_H_
+
+/* EHCI capability registers */
+#define HC_CAPLENGTH		0x000
+#define HC_LENGTH(p)		(((p) >> 00) & 0x00ff)	/* bits 7:0 */
+#define HC_VERSION(p)		(((p) >> 16) & 0xffff)	/* bits 31:16 */
+
+#define HC_HCSPARAMS		0x004
+#define HCS_INDICATOR(p)	((p) & (1 << 16))	/* true: has port indicators */
+#define HCS_PPC(p)		((p) & (1 << 4))	/* true: port power control */
+#define HCS_N_PORTS(p)		(((p) >> 0) & 0xf)	/* bits 3:0, ports on HC */
+
+#define HC_HCCPARAMS		0x008
+#define HCC_ISOC_CACHE(p)       ((p) & (1 << 7))	/* true: can cache isoc frame */
+#define HCC_ISOC_THRES(p)       (((p) >> 4) & 0x7)	/* bits 6:4, uframes cached */
+
+/* EHCI operational registers */
+#define HC_USBCMD		0x020
+#define CMD_LRESET		(1 << 7)		/* partial reset (no ports, etc) */
+#define CMD_RESET		(1 << 1)		/* reset HC not bus */
+#define CMD_RUN			(1 << 0)		/* start/stop HC */
+
+#define HC_USBSTS		0x024
+#define STS_PCD			(1 << 2)		/* port change detect */
+
+#define HC_FRINDEX		0x02c
+
+#define HC_CONFIGFLAG		0x060
+#define FLAG_CF			(1 << 0)		/* true: we'll support "high speed" */
+
+#define HC_PORTSC1		0x064
+#define PORT_OWNER		(1 << 13)		/* true: companion hc owns this port */
+#define PORT_POWER		(1 << 12)		/* true: has power (see PPC) */
+#define PORT_USB11(x)		(((x) & (3 << 10)) == (1 << 10))	/* USB 1.1 device */
+#define PORT_RESET		(1 << 8)		/* reset port */
+#define PORT_SUSPEND		(1 << 7)		/* suspend port */
+#define PORT_RESUME		(1 << 6)		/* resume it */
+#define PORT_PE			(1 << 2)		/* port enable */
+#define PORT_CSC		(1 << 1)		/* connect status change */
+#define PORT_CONNECT		(1 << 0)		/* device connected */
+#define PORT_RWC_BITS		(PORT_CSC)
+
+#define HC_ISO_PTD_DONEMAP_REG	0x130
+#define HC_ISO_PTD_SKIPMAP_REG	0x134
+#define HC_ISO_PTD_LASTPTD_REG	0x138
+#define HC_INT_PTD_DONEMAP_REG	0x140
+#define HC_INT_PTD_SKIPMAP_REG	0x144
+#define HC_INT_PTD_LASTPTD_REG	0x148
+#define HC_ATL_PTD_DONEMAP_REG	0x150
+#define HC_ATL_PTD_SKIPMAP_REG	0x154
+#define HC_ATL_PTD_LASTPTD_REG	0x158
+
+/* Configuration Register */
+#define HC_HW_MODE_CTRL		0x300
+#define ALL_ATX_RESET		(1 << 31)
+#define HW_ANA_DIGI_OC		(1 << 15)
+#define HW_DATA_BUS_32BIT	(1 << 8)
+#define HW_DACK_POL_HIGH	(1 << 6)
+#define HW_DREQ_POL_HIGH	(1 << 5)
+#define HW_INTR_HIGH_ACT	(1 << 2)
+#define HW_INTR_EDGE_TRIG	(1 << 1)
+#define HW_GLOBAL_INTR_EN	(1 << 0)
+
+#define HC_CHIP_ID_REG		0x304
+#define HC_SCRATCH_REG		0x308
+
+#define HC_RESET_REG		0x30c
+#define SW_RESET_RESET_HC	(1 << 1)
+#define SW_RESET_RESET_ALL	(1 << 0)
+
+#define HC_BUFFER_STATUS_REG	0x334
+#define ISO_BUF_FILL		(1 << 2)
+#define INT_BUF_FILL		(1 << 1)
+#define ATL_BUF_FILL		(1 << 0)
+
+#define HC_MEMORY_REG		0x33c
+#define ISP_BANK(x)		((x) << 16)
+
+#define HC_PORT1_CTRL		0x374
+#define PORT1_POWER		(3 << 3)
+#define PORT1_INIT1		(1 << 7)
+#define PORT1_INIT2		(1 << 23)
+#define HW_OTG_CTRL_SET		0x374
+#define HW_OTG_CTRL_CLR		0x376
+
+/* Interrupt Register */
+#define HC_INTERRUPT_REG	0x310
+
+#define HC_INTERRUPT_ENABLE	0x314
+#define HC_ISO_INT		(1 << 9)
+#define HC_ATL_INT		(1 << 8)
+#define HC_INTL_INT		(1 << 7)
+#define HC_EOT_INT		(1 << 3)
+#define HC_SOT_INT		(1 << 1)
+#define INTERRUPT_ENABLE_MASK	(HC_INTL_INT | HC_ATL_INT)
+
+#define HC_ISO_IRQ_MASK_OR_REG	0x318
+#define HC_INT_IRQ_MASK_OR_REG	0x31c
+#define HC_ATL_IRQ_MASK_OR_REG	0x320
+#define HC_ISO_IRQ_MASK_AND_REG	0x324
+#define HC_INT_IRQ_MASK_AND_REG	0x328
+#define HC_ATL_IRQ_MASK_AND_REG	0x32c
+
+#endif