ARM: imx: mem bit must be cleared before entering DSM mode

According to hardware design, mem bit must be clear before
entering DSM mode, as ARM core will be power gated in DSM mode.

Signed-off-by: Anson Huang <b20788@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>

arch/arm/mach-imx/common.h

@@ -116,7 +116,7 @@ void imx_anatop_init(void);
 void imx_anatop_pre_suspend(void);
 void imx_anatop_post_resume(void);
 int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode);
-void imx6q_set_int_mem_clk_lpm(void);
+void imx6q_set_int_mem_clk_lpm(bool enable);
 void imx6sl_set_wait_clk(bool enter);
 
 void imx_cpu_die(unsigned int cpu);

arch/arm/mach-imx/cpuidle-imx6q.c

@@ -71,7 +71,7 @@ int __init imx6q_cpuidle_init(void)
 		imx_scu_standby_enable();
 
 	/* Set INT_MEM_CLK_LPM bit to get a reliable WAIT mode support */
-	imx6q_set_int_mem_clk_lpm();
+	imx6q_set_int_mem_clk_lpm(true);
 
 	return cpuidle_register(&imx6q_cpuidle_driver, NULL);
 }

arch/arm/mach-imx/pm-imx6.c

@@ -199,11 +199,13 @@ struct imx6_cpu_pm_info {
 	u32 mmdc_io_val[MX6_MAX_MMDC_IO_NUM][2]; /* To save offset and value */
 } __aligned(8);
 
-void imx6q_set_int_mem_clk_lpm(void)
+void imx6q_set_int_mem_clk_lpm(bool enable)
 {
 	u32 val = readl_relaxed(ccm_base + CGPR);
 
-	val |= BM_CGPR_INT_MEM_CLK_LPM;
+	val &= ~BM_CGPR_INT_MEM_CLK_LPM;
+	if (enable)
+		val |= BM_CGPR_INT_MEM_CLK_LPM;
 	writel_relaxed(val, ccm_base + CGPR);
 }
 
@@ -334,6 +336,7 @@ static int imx6q_pm_enter(suspend_state_t state)
 	switch (state) {
 	case PM_SUSPEND_MEM:
 		imx6q_set_lpm(STOP_POWER_OFF);
+		imx6q_set_int_mem_clk_lpm(false);
 		imx6q_enable_wb(true);
 		/*
 		 * For suspend into ocram, asm code already take care of
@@ -352,6 +355,7 @@ static int imx6q_pm_enter(suspend_state_t state)
 		imx_gpc_post_resume();
 		imx6q_enable_rbc(false);
 		imx6q_enable_wb(false);
+		imx6q_set_int_mem_clk_lpm(true);
 		imx6q_set_lpm(WAIT_CLOCKED);
 		break;
 	default: