drm/msm/a6xx: Poll for HFI responses

The only HFI communication with the GMU on sdm845 happens
during initialization and all commands are synchronous. A fancy
interrupt tasklet and associated infrastructure is entirely
not eeded and puts us at the mercy of the scheduler.

Instead poll for the message signal and handle the response
immediately and go on our way.

Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drivers/gpu/drm/msm/adreno/a6xx_gmu.c

@@ -2,7 +2,6 @@
 /* Copyright (c) 2017-2018 The Linux Foundation. All rights reserved. */
 
 #include <linux/clk.h>
-#include <linux/iopoll.h>
 #include <linux/pm_opp.h>
 #include <soc/qcom/cmd-db.h>
 
@@ -42,9 +41,6 @@ static irqreturn_t a6xx_hfi_irq(int irq, void *data)
 	status = gmu_read(gmu, REG_A6XX_GMU_GMU2HOST_INTR_INFO);
 	gmu_write(gmu, REG_A6XX_GMU_GMU2HOST_INTR_CLR, status);
 
-	if (status & A6XX_GMU_GMU2HOST_INTR_INFO_MSGQ)
-		tasklet_schedule(&gmu->hfi_tasklet);
-
 	if (status & A6XX_GMU_GMU2HOST_INTR_INFO_CM3_FAULT) {
 		dev_err_ratelimited(gmu->dev, "GMU firmware fault\n");
 
@@ -135,9 +131,6 @@ static int a6xx_gmu_hfi_start(struct a6xx_gmu *gmu)
 	u32 val;
 	int ret;
 
-	gmu_rmw(gmu, REG_A6XX_GMU_GMU2HOST_INTR_MASK,
-		A6XX_GMU_GMU2HOST_INTR_INFO_MSGQ, 0);
-
 	gmu_write(gmu, REG_A6XX_GMU_HFI_CTRL_INIT, 1);
 
 	ret = gmu_poll_timeout(gmu, REG_A6XX_GMU_HFI_CTRL_STATUS, val,
@@ -566,8 +559,7 @@ static int a6xx_gmu_fw_start(struct a6xx_gmu *gmu, unsigned int state)
 }
 
 #define A6XX_HFI_IRQ_MASK \
-	(A6XX_GMU_GMU2HOST_INTR_INFO_MSGQ | \
-	 A6XX_GMU_GMU2HOST_INTR_INFO_CM3_FAULT)
+	(A6XX_GMU_GMU2HOST_INTR_INFO_CM3_FAULT)
 
 #define A6XX_GMU_IRQ_MASK \
 	(A6XX_GMU_AO_HOST_INTERRUPT_STATUS_WDOG_BITE | \
@@ -1199,9 +1191,6 @@ int a6xx_gmu_probe(struct a6xx_gpu *a6xx_gpu, struct device_node *node)
 	if (gmu->hfi_irq < 0 || gmu->gmu_irq < 0)
 		goto err;
 
-	/* Set up a tasklet to handle GMU HFI responses */
-	tasklet_init(&gmu->hfi_tasklet, a6xx_hfi_task, (unsigned long) gmu);
-
 	/* Get the power levels for the GMU and GPU */
 	a6xx_gmu_pwrlevels_probe(gmu);
 

drivers/gpu/drm/msm/adreno/a6xx_gmu.h

@@ -4,6 +4,7 @@
 #ifndef _A6XX_GMU_H_
 #define _A6XX_GMU_H_
 
+#include <linux/iopoll.h>
 #include <linux/interrupt.h>
 #include "msm_drv.h"
 #include "a6xx_hfi.h"
@@ -151,6 +152,4 @@ void a6xx_hfi_init(struct a6xx_gmu *gmu);
 int a6xx_hfi_start(struct a6xx_gmu *gmu, int boot_state);
 void a6xx_hfi_stop(struct a6xx_gmu *gmu);
 
-void a6xx_hfi_task(unsigned long data);
-
 #endif

drivers/gpu/drm/msm/adreno/a6xx_hfi.c

@@ -79,83 +79,72 @@ static int a6xx_hfi_queue_write(struct a6xx_gmu *gmu,
 	return 0;
 }
 
-struct a6xx_hfi_response {
-	u32 id;
-	u32 seqnum;
-	struct list_head node;
-	struct completion complete;
-
-	u32 error;
-	u32 payload[16];
-};
+static int a6xx_hfi_wait_for_ack(struct a6xx_gmu *gmu, u32 id, u32 seqnum,
+		u32 *payload, u32 payload_size)
+{
+	struct a6xx_hfi_queue *queue = &gmu->queues[HFI_RESPONSE_QUEUE];
+	u32 val;
+	int ret;
 
-/*
- * Incoming HFI ack messages can come in out of order so we need to store all
- * the pending messages on a list until they are handled.
- */
-static spinlock_t hfi_ack_lock = __SPIN_LOCK_UNLOCKED(message_lock);
-static LIST_HEAD(hfi_ack_list);
+	/* Wait for a response */
+	ret = gmu_poll_timeout(gmu, REG_A6XX_GMU_GMU2HOST_INTR_INFO, val,
+		val & A6XX_GMU_GMU2HOST_INTR_INFO_MSGQ, 100, 5000);
 
-static void a6xx_hfi_handle_ack(struct a6xx_gmu *gmu,
-		struct a6xx_hfi_msg_response *msg)
-{
-	struct a6xx_hfi_response *resp;
-	u32 id, seqnum;
-
-	/* msg->ret_header contains the header of the message being acked */
-	id = HFI_HEADER_ID(msg->ret_header);
-	seqnum = HFI_HEADER_SEQNUM(msg->ret_header);
-
-	spin_lock(&hfi_ack_lock);
-	list_for_each_entry(resp, &hfi_ack_list, node) {
-		if (resp->id == id && resp->seqnum == seqnum) {
-			resp->error = msg->error;
-			memcpy(resp->payload, msg->payload,
-				sizeof(resp->payload));
-
-			complete(&resp->complete);
-			spin_unlock(&hfi_ack_lock);
-			return;
-		}
+	if (ret) {
+		dev_err(gmu->dev,
+			"Message %s id %d timed out waiting for response\n",
+			a6xx_hfi_msg_id[id], seqnum);
+		return -ETIMEDOUT;
 	}
-	spin_unlock(&hfi_ack_lock);
 
-	dev_err(gmu->dev, "Nobody was waiting for HFI message %d\n", seqnum);
-}
+	/* Clear the interrupt */
+	gmu_write(gmu, REG_A6XX_GMU_GMU2HOST_INTR_CLR,
+		A6XX_GMU_GMU2HOST_INTR_INFO_MSGQ);
 
-static void a6xx_hfi_handle_error(struct a6xx_gmu *gmu,
-		struct a6xx_hfi_msg_response *msg)
-{
-	struct a6xx_hfi_msg_error *error = (struct a6xx_hfi_msg_error *) msg;
+	for (;;) {
+		struct a6xx_hfi_msg_response resp;
 
-	dev_err(gmu->dev, "GMU firmware error %d\n", error->code);
-}
+		/* Get the next packet */
+		ret = a6xx_hfi_queue_read(queue, (u32 *) &resp,
+			sizeof(resp) >> 2);
 
-void a6xx_hfi_task(unsigned long data)
-{
-	struct a6xx_gmu *gmu = (struct a6xx_gmu *) data;
-	struct a6xx_hfi_queue *queue = &gmu->queues[HFI_RESPONSE_QUEUE];
-	struct a6xx_hfi_msg_response resp;
+		/* If the queue is empty our response never made it */
+		if (!ret) {
+			dev_err(gmu->dev,
+				"The HFI response queue is unexpectedly empty\n");
 
-	for (;;) {
-		u32 id;
-		int ret = a6xx_hfi_queue_read(queue, (u32 *) &resp,
-			sizeof(resp) >> 2);
+			return -ENOENT;
+		}
+
+		if (HFI_HEADER_ID(resp.header) == HFI_F2H_MSG_ERROR) {
+			struct a6xx_hfi_msg_error *error =
+				(struct a6xx_hfi_msg_error *) &resp;
 
-		/* Returns the number of bytes copied or negative on error */
-		if (ret <= 0) {
-			if (ret < 0)
-				dev_err(gmu->dev,
-					"Unable to read the HFI message queue\n");
-			break;
+			dev_err(gmu->dev, "GMU firmware error %d\n",
+				error->code);
+			continue;
+		}
+
+		if (seqnum != HFI_HEADER_SEQNUM(resp.ret_header)) {
+			dev_err(gmu->dev,
+				"Unexpected message id %d on the response queue\n",
+				HFI_HEADER_SEQNUM(resp.ret_header));
+			continue;
+		}
+
+		if (resp.error) {
+			dev_err(gmu->dev,
+				"Message %s id %d returned error %d\n",
+				a6xx_hfi_msg_id[id], seqnum, resp.error);
+			return -EINVAL;
 		}
 
-		id = HFI_HEADER_ID(resp.header);
+		/* All is well, copy over the buffer */
+		if (payload && payload_size)
+			memcpy(payload, resp.payload,
+				min_t(u32, payload_size, sizeof(resp.payload)));
 
-		if (id == HFI_F2H_MSG_ACK)
-			a6xx_hfi_handle_ack(gmu, &resp);
-		else if (id == HFI_F2H_MSG_ERROR)
-			a6xx_hfi_handle_error(gmu, &resp);
+		return 0;
 	}
 }
 
@@ -163,7 +152,6 @@ static int a6xx_hfi_send_msg(struct a6xx_gmu *gmu, int id,
 		void *data, u32 size, u32 *payload, u32 payload_size)
 {
 	struct a6xx_hfi_queue *queue = &gmu->queues[HFI_COMMAND_QUEUE];
-	struct a6xx_hfi_response resp = { 0 };
 	int ret, dwords = size >> 2;
 	u32 seqnum;
 
@@ -173,53 +161,14 @@ static int a6xx_hfi_send_msg(struct a6xx_gmu *gmu, int id,
 	*((u32 *) data) = (seqnum << 20) | (HFI_MSG_CMD << 16) |
 		(dwords << 8) | id;
 
-	init_completion(&resp.complete);
-	resp.id = id;
-	resp.seqnum = seqnum;
-
-	spin_lock_bh(&hfi_ack_lock);
-	list_add_tail(&resp.node, &hfi_ack_list);
-	spin_unlock_bh(&hfi_ack_lock);
-
 	ret = a6xx_hfi_queue_write(gmu, queue, data, dwords);
 	if (ret) {
 		dev_err(gmu->dev, "Unable to send message %s id %d\n",
 			a6xx_hfi_msg_id[id], seqnum);
-		goto out;
-	}
-
-	/* Wait up to 5 seconds for the response */
-	ret = wait_for_completion_timeout(&resp.complete,
-		msecs_to_jiffies(5000));
-	if (!ret) {
-		dev_err(gmu->dev,
-			"Message %s id %d timed out waiting for response\n",
-			a6xx_hfi_msg_id[id], seqnum);
-		ret = -ETIMEDOUT;
-	} else
-		ret = 0;
-
-out:
-	spin_lock_bh(&hfi_ack_lock);
-	list_del(&resp.node);
-	spin_unlock_bh(&hfi_ack_lock);
-
-	if (ret)
 		return ret;
-
-	if (resp.error) {
-		dev_err(gmu->dev, "Message %s id %d returned error %d\n",
-			a6xx_hfi_msg_id[id], seqnum, resp.error);
-		return -EINVAL;
 	}
 
-	if (payload && payload_size) {
-		int copy = min_t(u32, payload_size, sizeof(resp.payload));
-
-		memcpy(payload, resp.payload, copy);
-	}
-
-	return 0;
+	return a6xx_hfi_wait_for_ack(gmu, id, seqnum, payload, payload_size);
 }
 
 static int a6xx_hfi_send_gmu_init(struct a6xx_gmu *gmu, int boot_state)