ARM: SAMSUNG: Save UART DIVSLOT register based on SoC type

The only SoC that does not have DIVSLOT register is S3C2410, so instead
of exporting a variable for platforms to set if DIVSLOT register should
be preserved, it's enough to simply check whether we are running on
a S3C2410 instead.

Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

arch/arm/mach-s3c64xx/pm.c

@@ -332,7 +332,6 @@ static __init int s3c64xx_pm_initcall(void)
 {
 	pm_cpu_prep = s3c64xx_pm_prepare;
 	pm_cpu_sleep = s3c64xx_cpu_suspend;
-	pm_uart_udivslot = 1;
 
 #ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
 	gpio_request(S3C64XX_GPN(12), "DEBUG_LED0");

arch/arm/mach-s5p64x0/pm.c

@@ -161,7 +161,6 @@ static int s5p64x0_pm_add(struct device *dev, struct subsys_interface *sif)
 {
 	pm_cpu_prep = s5p64x0_pm_prepare;
 	pm_cpu_sleep = s5p64x0_cpu_suspend;
-	pm_uart_udivslot = 1;
 
 	return 0;
 }

arch/arm/plat-samsung/include/plat/pm.h

@@ -54,8 +54,6 @@ extern int (*pm_cpu_sleep)(unsigned long);
 
 extern unsigned long s3c_pm_flags;
 
-extern unsigned char pm_uart_udivslot;  /* true to save UART UDIVSLOT */
-
 /* from sleep.S */
 
 extern int s3c2410_cpu_suspend(unsigned long);

arch/arm/plat-samsung/pm.c

@@ -24,6 +24,8 @@
 #include <asm/cacheflush.h>
 #include <asm/suspend.h>
 
+#include <plat/cpu.h>
+
 #ifdef CONFIG_SAMSUNG_ATAGS
 #include <mach/hardware.h>
 #include <mach/map.h>
@@ -70,17 +72,6 @@ static inline void s3c_pm_debug_init(void)
 	s3c_pm_debug_init_uart();
 }
 
-#else
-#define s3c_pm_debug_init() do { } while(0)
-
-#endif /* CONFIG_SAMSUNG_PM_DEBUG */
-
-/* Save the UART configurations if we are configured for debug. */
-
-unsigned char pm_uart_udivslot;
-
-#ifdef CONFIG_SAMSUNG_PM_DEBUG
-
 static struct pm_uart_save uart_save;
 
 static void s3c_pm_save_uart(unsigned int uart, struct pm_uart_save *save)
@@ -93,7 +84,7 @@ static void s3c_pm_save_uart(unsigned int uart, struct pm_uart_save *save)
 	save->umcon = __raw_readl(regs + S3C2410_UMCON);
 	save->ubrdiv = __raw_readl(regs + S3C2410_UBRDIV);
 
-	if (pm_uart_udivslot)
+	if (!soc_is_s3c2410())
 		save->udivslot = __raw_readl(regs + S3C2443_DIVSLOT);
 
 	S3C_PMDBG("UART[%d]: ULCON=%04x, UCON=%04x, UFCON=%04x, UBRDIV=%04x\n",
@@ -117,7 +108,7 @@ static void s3c_pm_restore_uart(unsigned int uart, struct pm_uart_save *save)
 	__raw_writel(save->umcon, regs + S3C2410_UMCON);
 	__raw_writel(save->ubrdiv, regs + S3C2410_UBRDIV);
 
-	if (pm_uart_udivslot)
+	if (!soc_is_s3c2410())
 		__raw_writel(save->udivslot, regs + S3C2443_DIVSLOT);
 }
 
@@ -126,6 +117,8 @@ static void s3c_pm_restore_uarts(void)
 	s3c_pm_restore_uart(CONFIG_DEBUG_S3C_UART, &uart_save);
 }
 #else
+#define s3c_pm_debug_init() do { } while (0)
+
 static void s3c_pm_save_uarts(void) { }
 static void s3c_pm_restore_uarts(void) { }
 #endif