serial: sh-sci: Avoid overflow in sci_baud_calc_hscif()

If bps >= 1048576, the multiplication of the predivider and "bps" will
overflow, and both br and err will contain bogus values.
Skip the current and all higher clock select predividers when overflow
is detected.  Simplify the calculations using intermediates while we're
at it.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/tty/serial/sh-sci.c

@@ -1870,7 +1870,7 @@ static unsigned int sci_scbrr_calc(struct sci_port *s, unsigned int bps,
 static void sci_baud_calc_hscif(unsigned int bps, unsigned long freq, int *brr,
 				unsigned int *srr, unsigned int *cks)
 {
-	unsigned int sr, br, c;
+	unsigned int sr, br, prediv, scrate, c;
 	int err, recv_margin;
 	int min_err = 1000; /* 100% */
 	int recv_max_margin = 0;
@@ -1880,12 +1880,25 @@ static void sci_baud_calc_hscif(unsigned int bps, unsigned long freq, int *brr,
 	for (sr = 8; sr <= 32; sr++) {
 		for (c = 0; c <= 3; c++) {
 			/* integerized formulas from HSCIF documentation */
-			br = DIV_ROUND_CLOSEST(freq, (sr *
-					      (1 << (2 * c + 1)) * bps));
+			prediv = sr * (1 << (2 * c + 1));
+
+			/*
+			 * We need to calculate:
+			 *
+			 *     br = freq / (prediv * bps) clamped to [1..256]
+			 *     err = (freq / (br * prediv * bps / 1000)) - 1000
+			 *
+			 * Watch out for overflow when calculating the desired
+			 * sampling clock rate!
+			 */
+			if (bps > UINT_MAX / prediv)
+				break;
+
+			scrate = prediv * bps;
+			br = DIV_ROUND_CLOSEST(freq, scrate);
 			br = clamp(br, 1U, 256U);
-			err = DIV_ROUND_CLOSEST(freq, (br * bps * sr *
-					       (1 << (2 * c + 1)) / 1000)) -
-					       1000;
+			err = DIV_ROUND_CLOSEST(freq, (br * scrate) / 1000) -
+			      1000;
 			/* Calc recv margin
 			 * M: Receive margin (%)
 			 * N: Ratio of bit rate to clock (N = sampling rate)