[media] cx23885: Add support for Hauppauge WinTV quadHD ATSC version

Add support for the Hauppauge WinTV quadHD ATSC version.
IR support has not been provided, all 4 tuners, demodulators etc are working.
Further documentation can be found on Linux TV wiki.

Signed-off-by: Stephen Backway <stev391@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Documentation/media/v4l-drivers/cx23885-cardlist.rst

@@ -60,3 +60,4 @@ cx23885 cards list
 	 54 -> ViewCast 260e                                       [1576:0260]
 	 55 -> ViewCast 460e                                       [1576:0460]
 	 56 -> Hauppauge WinTV-QuadHD-DVB                          [0070:6a28,0070:6b28]
+	 57 -> Hauppauge WinTV-QuadHD-ATSC                         [0070:6a18,0070:6b18]

drivers/media/pci/cx23885/cx23885-cards.c

@@ -770,6 +770,11 @@ struct cx23885_board cx23885_boards[] = {
 		.portb        = CX23885_MPEG_DVB,
 		.portc        = CX23885_MPEG_DVB,
 	},
+	[CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC] = {
+		.name        = "Hauppauge WinTV-QuadHD-ATSC",
+		.portb        = CX23885_MPEG_DVB,
+		.portc        = CX23885_MPEG_DVB,
+	},
 };
 const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
 
@@ -1073,6 +1078,14 @@ struct cx23885_subid cx23885_subids[] = {
 		.subvendor = 0x0070,
 		.subdevice = 0x6b28,
 		.card      = CX23885_BOARD_HAUPPAUGE_QUADHD_DVB, /* Tuner Pair 2 */
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x6a18,
+		.card      = CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC, /* Tuner Pair 1 */
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x6b18,
+		.card      = CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC, /* Tuner Pair 2 */
 	},
 };
 const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);
@@ -1278,6 +1291,18 @@ static void hauppauge_eeprom(struct cx23885_dev *dev, u8 *eeprom_data)
 		/* WinTV-QuadHD (DVB) Tuner Pair 2 (PCIe, IR, half height,
 		   DVB-T/T2/C, DVB-T/T2/C */
 		break;
+	case 165100:
+		/*
+		 * WinTV-QuadHD (ATSC) Tuner Pair 1 (PCIe, IR, half height,
+		 * ATSC, ATSC
+		 */
+		break;
+	case 165101:
+		/*
+		 * WinTV-QuadHD (DVB) Tuner Pair 2 (PCIe, IR, half height,
+		 * ATSC, ATSC
+		 */
+		break;
 	default:
 		printk(KERN_WARNING "%s: warning: "
 			"unknown hauppauge model #%d\n",
@@ -1751,6 +1776,7 @@ void cx23885_gpio_setup(struct cx23885_dev *dev)
 		break;
 	case CX23885_BOARD_HAUPPAUGE_HVR5525:
 	case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB:
+	case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC:
 		/*
 		 * HVR5525 GPIO Details:
 		 *  GPIO-00 IR_WIDE
@@ -1826,6 +1852,7 @@ int cx23885_ir_init(struct cx23885_dev *dev)
 	case CX23885_BOARD_HAUPPAUGE_HVR1255_22111:
 	case CX23885_BOARD_HAUPPAUGE_HVR1210:
 	case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB:
+	case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC:
 		/* FIXME: Implement me */
 		break;
 	case CX23885_BOARD_HAUPPAUGE_HVR1270:
@@ -2025,6 +2052,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
 	case CX23885_BOARD_HAUPPAUGE_IMPACTVCBE:
 	case CX23885_BOARD_HAUPPAUGE_HVR5525:
 	case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB:
+	case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC:
 		if (dev->i2c_bus[0].i2c_rc == 0)
 			hauppauge_eeprom(dev, eeprom+0xc0);
 		break;
@@ -2171,6 +2199,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
 		ts2->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
 		break;
 	case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB:
+	case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC:
 		ts1->gen_ctrl_val  = 0xc; /* Serial bus + punctured clock */
 		ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
 		ts1->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;

drivers/media/pci/cx23885/cx23885-dvb.c

@@ -74,6 +74,7 @@
 #include "sp2.h"
 #include "m88ds3103.h"
 #include "m88rs6000t.h"
+#include "lgdt3306a.h"
 
 static unsigned int debug;
 
@@ -574,6 +575,30 @@ static struct stb6100_config prof_8000_stb6100_config = {
 	.refclock = 27000000,
 };
 
+static struct lgdt3306a_config hauppauge_quadHD_ATSC_a_config = {
+	.i2c_addr               = 0x59,
+	.qam_if_khz             = 4000,
+	.vsb_if_khz             = 3250,
+	.deny_i2c_rptr          = 1, /* Disabled */
+	.spectral_inversion     = 0, /* Disabled */
+	.mpeg_mode              = LGDT3306A_MPEG_SERIAL,
+	.tpclk_edge             = LGDT3306A_TPCLK_RISING_EDGE,
+	.tpvalid_polarity       = LGDT3306A_TP_VALID_HIGH,
+	.xtalMHz                = 25, /* 24 or 25 */
+};
+
+static struct lgdt3306a_config hauppauge_quadHD_ATSC_b_config = {
+	.i2c_addr               = 0x0e,
+	.qam_if_khz             = 4000,
+	.vsb_if_khz             = 3250,
+	.deny_i2c_rptr          = 1, /* Disabled */
+	.spectral_inversion     = 0, /* Disabled */
+	.mpeg_mode              = LGDT3306A_MPEG_SERIAL,
+	.tpclk_edge             = LGDT3306A_TPCLK_RISING_EDGE,
+	.tpvalid_polarity       = LGDT3306A_TP_VALID_HIGH,
+	.xtalMHz                = 25, /* 24 or 25 */
+};
+
 static int p8000_set_voltage(struct dvb_frontend *fe,
 			     enum fe_sec_voltage voltage)
 {
@@ -2365,6 +2390,81 @@ static int dvb_register(struct cx23885_tsport *port)
 			break;
 		}
 		break;
+	case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC:
+		switch (port->nr) {
+		/* port b - Terrestrial/cable */
+		case 1:
+			/* attach frontend */
+			i2c_bus = &dev->i2c_bus[0];
+			fe0->dvb.frontend = dvb_attach(lgdt3306a_attach,
+				&hauppauge_quadHD_ATSC_a_config, &i2c_bus->i2c_adap);
+			if (fe0->dvb.frontend == NULL)
+				break;
+
+			/* attach tuner */
+			memset(&si2157_config, 0, sizeof(si2157_config));
+			si2157_config.fe = fe0->dvb.frontend;
+			si2157_config.if_port = 1;
+			si2157_config.inversion = 1;
+			memset(&info, 0, sizeof(struct i2c_board_info));
+			strlcpy(info.type, "si2157", I2C_NAME_SIZE);
+			info.addr = 0x60;
+			info.platform_data = &si2157_config;
+			request_module("%s", info.type);
+			client_tuner = i2c_new_device(&dev->i2c_bus[1].i2c_adap, &info);
+			if (!client_tuner || !client_tuner->dev.driver) {
+				module_put(client_demod->dev.driver->owner);
+				i2c_unregister_device(client_demod);
+				port->i2c_client_demod = NULL;
+				goto frontend_detach;
+			}
+			if (!try_module_get(client_tuner->dev.driver->owner)) {
+				i2c_unregister_device(client_tuner);
+				module_put(client_demod->dev.driver->owner);
+				i2c_unregister_device(client_demod);
+				port->i2c_client_demod = NULL;
+				goto frontend_detach;
+			}
+			port->i2c_client_tuner = client_tuner;
+			break;
+
+		/* port c - terrestrial/cable */
+		case 2:
+			/* attach frontend */
+			i2c_bus = &dev->i2c_bus[0];
+			fe0->dvb.frontend = dvb_attach(lgdt3306a_attach,
+				&hauppauge_quadHD_ATSC_b_config, &i2c_bus->i2c_adap);
+			if (fe0->dvb.frontend == NULL)
+				break;
+
+			/* attach tuner */
+			memset(&si2157_config, 0, sizeof(si2157_config));
+			si2157_config.fe = fe0->dvb.frontend;
+			si2157_config.if_port = 1;
+			si2157_config.inversion = 1;
+			memset(&info, 0, sizeof(struct i2c_board_info));
+			strlcpy(info.type, "si2157", I2C_NAME_SIZE);
+			info.addr = 0x62;
+			info.platform_data = &si2157_config;
+			request_module("%s", info.type);
+			client_tuner = i2c_new_device(&dev->i2c_bus[1].i2c_adap, &info);
+			if (!client_tuner || !client_tuner->dev.driver) {
+				module_put(client_demod->dev.driver->owner);
+				i2c_unregister_device(client_demod);
+				port->i2c_client_demod = NULL;
+				goto frontend_detach;
+			}
+			if (!try_module_get(client_tuner->dev.driver->owner)) {
+				i2c_unregister_device(client_tuner);
+				module_put(client_demod->dev.driver->owner);
+				i2c_unregister_device(client_demod);
+				port->i2c_client_demod = NULL;
+				goto frontend_detach;
+			}
+			port->i2c_client_tuner = client_tuner;
+			break;
+		}
+		break;
 
 	default:
 		printk(KERN_INFO "%s: The frontend of your DVB/ATSC card "

drivers/media/pci/cx23885/cx23885.h

@@ -103,7 +103,8 @@
 #define CX23885_BOARD_HAUPPAUGE_STARBURST      53
 #define CX23885_BOARD_VIEWCAST_260E            54
 #define CX23885_BOARD_VIEWCAST_460E            55
-#define CX23885_BOARD_HAUPPAUGE_QUADHD_DVB    56
+#define CX23885_BOARD_HAUPPAUGE_QUADHD_DVB     56
+#define CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC    57
 
 #define GPIO_0 0x00000001
 #define GPIO_1 0x00000002