ソースを参照

Merge remote-tracking branches 'regulator/topic/rk808', 'regulator/topic/rpm', 'regulator/topic/rt5033' and 'regulator/topic/tps65023' into regulator-next

Mark Brown 10 年 前
コミット
dd7c2e720a

+ 8 - 4
drivers/regulator/qcom_rpm-regulator.c

@@ -227,9 +227,11 @@ static int rpm_reg_set_mV_sel(struct regulator_dev *rdev,
 		return uV;
 
 	mutex_lock(&vreg->lock);
-	vreg->uV = uV;
 	if (vreg->is_enabled)
-		ret = rpm_reg_write(vreg, req, vreg->uV / 1000);
+		ret = rpm_reg_write(vreg, req, uV / 1000);
+
+	if (!ret)
+		vreg->uV = uV;
 	mutex_unlock(&vreg->lock);
 
 	return ret;
@@ -252,9 +254,11 @@ static int rpm_reg_set_uV_sel(struct regulator_dev *rdev,
 		return uV;
 
 	mutex_lock(&vreg->lock);
-	vreg->uV = uV;
 	if (vreg->is_enabled)
-		ret = rpm_reg_write(vreg, req, vreg->uV);
+		ret = rpm_reg_write(vreg, req, uV);
+
+	if (!ret)
+		vreg->uV = uV;
 	mutex_unlock(&vreg->lock);
 
 	return ret;

+ 3 - 3
drivers/regulator/rk808-regulator.c

@@ -97,7 +97,7 @@ static int rk808_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
 				  RK808_RAMP_RATE_MASK, ramp_value);
 }
 
-int rk808_set_suspend_voltage(struct regulator_dev *rdev, int uv)
+static int rk808_set_suspend_voltage(struct regulator_dev *rdev, int uv)
 {
 	unsigned int reg;
 	int sel = regulator_map_voltage_linear_range(rdev, uv, uv);
@@ -112,7 +112,7 @@ int rk808_set_suspend_voltage(struct regulator_dev *rdev, int uv)
 				  sel);
 }
 
-int rk808_set_suspend_enable(struct regulator_dev *rdev)
+static int rk808_set_suspend_enable(struct regulator_dev *rdev)
 {
 	unsigned int reg;
 
@@ -123,7 +123,7 @@ int rk808_set_suspend_enable(struct regulator_dev *rdev)
 				  0);
 }
 
-int rk808_set_suspend_disable(struct regulator_dev *rdev)
+static int rk808_set_suspend_disable(struct regulator_dev *rdev)
 {
 	unsigned int reg;
 

+ 7 - 1
drivers/regulator/rt5033-regulator.c

@@ -36,6 +36,8 @@ static struct regulator_ops rt5033_buck_ops = {
 static const struct regulator_desc rt5033_supported_regulators[] = {
 	[RT5033_BUCK] = {
 		.name		= "BUCK",
+		.of_match	= of_match_ptr("BUCK"),
+		.regulators_node = of_match_ptr("regulators"),
 		.id		= RT5033_BUCK,
 		.ops		= &rt5033_buck_ops,
 		.type		= REGULATOR_VOLTAGE,
@@ -50,6 +52,8 @@ static const struct regulator_desc rt5033_supported_regulators[] = {
 	},
 	[RT5033_LDO] = {
 		.name		= "LDO",
+		.of_match	= of_match_ptr("LDO"),
+		.regulators_node = of_match_ptr("regulators"),
 		.id		= RT5033_LDO,
 		.ops		= &rt5033_buck_ops,
 		.type		= REGULATOR_VOLTAGE,
@@ -64,6 +68,8 @@ static const struct regulator_desc rt5033_supported_regulators[] = {
 	},
 	[RT5033_SAFE_LDO] = {
 		.name		= "SAFE_LDO",
+		.of_match	= of_match_ptr("SAFE_LDO"),
+		.regulators_node = of_match_ptr("regulators"),
 		.id		= RT5033_SAFE_LDO,
 		.ops		= &rt5033_safe_ldo_ops,
 		.type		= REGULATOR_VOLTAGE,
@@ -81,7 +87,7 @@ static int rt5033_regulator_probe(struct platform_device *pdev)
 	int ret, i;
 	struct regulator_config config = {};
 
-	config.dev = &pdev->dev;
+	config.dev = rt5033->dev;
 	config.driver_data = rt5033;
 
 	for (i = 0; i < ARRAY_SIZE(rt5033_supported_regulators); i++) {

+ 3 - 3
drivers/regulator/tps65023-regulator.c

@@ -173,7 +173,7 @@ static int tps65023_dcdc_set_voltage_sel(struct regulator_dev *dev,
 }
 
 /* Operations permitted on VDCDCx */
-static struct regulator_ops tps65023_dcdc_ops = {
+static const struct regulator_ops tps65023_dcdc_ops = {
 	.is_enabled = regulator_is_enabled_regmap,
 	.enable = regulator_enable_regmap,
 	.disable = regulator_disable_regmap,
@@ -184,7 +184,7 @@ static struct regulator_ops tps65023_dcdc_ops = {
 };
 
 /* Operations permitted on LDOx */
-static struct regulator_ops tps65023_ldo_ops = {
+static const struct regulator_ops tps65023_ldo_ops = {
 	.is_enabled = regulator_is_enabled_regmap,
 	.enable = regulator_enable_regmap,
 	.disable = regulator_disable_regmap,
@@ -194,7 +194,7 @@ static struct regulator_ops tps65023_ldo_ops = {
 	.map_voltage = regulator_map_voltage_ascend,
 };
 
-static struct regmap_config tps65023_regmap_config = {
+static const struct regmap_config tps65023_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 8,
 };