Merge branch 'x86/urgent' into x86/mce2

.mailmap

@@ -92,6 +92,7 @@ Rudolf Marek <R.Marek@sh.cvut.cz>
 Rui Saraiva <rmps@joel.ist.utl.pt>
 Sachin P Sant <ssant@in.ibm.com>
 Sam Ravnborg <sam@mars.ravnborg.org>
+Sascha Hauer <s.hauer@pengutronix.de>
 S.Çağlar Onur <caglar@pardus.org.tr>
 Simon Kelley <simon@thekelleys.org.uk>
 Stéphane Witzmann <stephane.witzmann@ubpmes.univ-bpclermont.fr>
@@ -100,6 +101,7 @@ Tejun Heo <htejun@gmail.com>
 Thomas Graf <tgraf@suug.ch>
 Tony Luck <tony.luck@intel.com>
 Tsuneo Yoshioka <Tsuneo.Yoshioka@f-secure.com>
-Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
 Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
+Uwe Kleine-König <ukl@pengutronix.de>
+Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
 Valdis Kletnieks <Valdis.Kletnieks@vt.edu>

CREDITS

@@ -2166,7 +2166,6 @@ D: Initial implementation of VC's, pty's and select()
 
 N: Pavel Machek
 E: pavel@ucw.cz
-E: pavel@suse.cz
 D: Softcursor for vga, hypertech cdrom support, vcsa bugfix, nbd
 D: sun4/330 port, capabilities for elf, speedup for rm on ext2, USB,
 D: work on suspend-to-ram/disk, killing duplicates from ioctl32

Documentation/ABI/testing/sysfs-firmware-memmap

@@ -1,6 +1,6 @@
 What:		/sys/firmware/memmap/
 Date:		June 2008
-Contact:	Bernhard Walle <bwalle@suse.de>
+Contact:	Bernhard Walle <bernhard.walle@gmx.de>
 Description:
 		On all platforms, the firmware provides a memory map which the
 		kernel reads. The resources from that memory map are registered

Documentation/DocBook/Makefile

@@ -6,7 +6,7 @@
 # To add a new book the only step required is to add the book to the
 # list of DOCBOOKS.
 
-DOCBOOKS := z8530book.xml mcabook.xml \
+DOCBOOKS := z8530book.xml mcabook.xml device-drivers.xml \
 	    kernel-hacking.xml kernel-locking.xml deviceiobook.xml \
 	    procfs-guide.xml writing_usb_driver.xml networking.xml \
 	    kernel-api.xml filesystems.xml lsm.xml usb.xml kgdb.xml \

Documentation/DocBook/device-drivers.tmpl

@@ -0,0 +1,418 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
+	"http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
+
+<book id="LinuxDriversAPI">
+ <bookinfo>
+  <title>Linux Device Drivers</title>
+
+  <legalnotice>
+   <para>
+     This documentation is free software; you can redistribute
+     it and/or modify it under the terms of the GNU General Public
+     License as published by the Free Software Foundation; either
+     version 2 of the License, or (at your option) any later
+     version.
+   </para>
+
+   <para>
+     This program is distributed in the hope that it will be
+     useful, but WITHOUT ANY WARRANTY; without even the implied
+     warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+     See the GNU General Public License for more details.
+   </para>
+
+   <para>
+     You should have received a copy of the GNU General Public
+     License along with this program; if not, write to the Free
+     Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+     MA 02111-1307 USA
+   </para>
+
+   <para>
+     For more details see the file COPYING in the source
+     distribution of Linux.
+   </para>
+  </legalnotice>
+ </bookinfo>
+
+<toc></toc>
+
+  <chapter id="Basics">
+     <title>Driver Basics</title>
+     <sect1><title>Driver Entry and Exit points</title>
+!Iinclude/linux/init.h
+     </sect1>
+
+     <sect1><title>Atomic and pointer manipulation</title>
+!Iarch/x86/include/asm/atomic_32.h
+!Iarch/x86/include/asm/unaligned.h
+     </sect1>
+
+     <sect1><title>Delaying, scheduling, and timer routines</title>
+!Iinclude/linux/sched.h
+!Ekernel/sched.c
+!Ekernel/timer.c
+     </sect1>
+     <sect1><title>High-resolution timers</title>
+!Iinclude/linux/ktime.h
+!Iinclude/linux/hrtimer.h
+!Ekernel/hrtimer.c
+     </sect1>
+     <sect1><title>Workqueues and Kevents</title>
+!Ekernel/workqueue.c
+     </sect1>
+     <sect1><title>Internal Functions</title>
+!Ikernel/exit.c
+!Ikernel/signal.c
+!Iinclude/linux/kthread.h
+!Ekernel/kthread.c
+     </sect1>
+
+     <sect1><title>Kernel objects manipulation</title>
+<!--
+X!Iinclude/linux/kobject.h
+-->
+!Elib/kobject.c
+     </sect1>
+
+     <sect1><title>Kernel utility functions</title>
+!Iinclude/linux/kernel.h
+!Ekernel/printk.c
+!Ekernel/panic.c
+!Ekernel/sys.c
+!Ekernel/rcupdate.c
+     </sect1>
+
+     <sect1><title>Device Resource Management</title>
+!Edrivers/base/devres.c
+     </sect1>
+
+  </chapter>
+
+  <chapter id="devdrivers">
+     <title>Device drivers infrastructure</title>
+     <sect1><title>Device Drivers Base</title>
+<!--
+X!Iinclude/linux/device.h
+-->
+!Edrivers/base/driver.c
+!Edrivers/base/core.c
+!Edrivers/base/class.c
+!Edrivers/base/firmware_class.c
+!Edrivers/base/transport_class.c
+<!-- Cannot be included, because
+     attribute_container_add_class_device_adapter
+ and attribute_container_classdev_to_container
+     exceed allowed 44 characters maximum
+X!Edrivers/base/attribute_container.c
+-->
+!Edrivers/base/sys.c
+<!--
+X!Edrivers/base/interface.c
+-->
+!Edrivers/base/platform.c
+!Edrivers/base/bus.c
+     </sect1>
+     <sect1><title>Device Drivers Power Management</title>
+!Edrivers/base/power/main.c
+     </sect1>
+     <sect1><title>Device Drivers ACPI Support</title>
+<!-- Internal functions only
+X!Edrivers/acpi/sleep/main.c
+X!Edrivers/acpi/sleep/wakeup.c
+X!Edrivers/acpi/motherboard.c
+X!Edrivers/acpi/bus.c
+-->
+!Edrivers/acpi/scan.c
+!Idrivers/acpi/scan.c
+<!-- No correct structured comments
+X!Edrivers/acpi/pci_bind.c
+-->
+     </sect1>
+     <sect1><title>Device drivers PnP support</title>
+!Idrivers/pnp/core.c
+<!-- No correct structured comments
+X!Edrivers/pnp/system.c
+ -->
+!Edrivers/pnp/card.c
+!Idrivers/pnp/driver.c
+!Edrivers/pnp/manager.c
+!Edrivers/pnp/support.c
+     </sect1>
+     <sect1><title>Userspace IO devices</title>
+!Edrivers/uio/uio.c
+!Iinclude/linux/uio_driver.h
+     </sect1>
+  </chapter>
+
+  <chapter id="parportdev">
+     <title>Parallel Port Devices</title>
+!Iinclude/linux/parport.h
+!Edrivers/parport/ieee1284.c
+!Edrivers/parport/share.c
+!Idrivers/parport/daisy.c
+  </chapter>
+
+  <chapter id="message_devices">
+	<title>Message-based devices</title>
+     <sect1><title>Fusion message devices</title>
+!Edrivers/message/fusion/mptbase.c
+!Idrivers/message/fusion/mptbase.c
+!Edrivers/message/fusion/mptscsih.c
+!Idrivers/message/fusion/mptscsih.c
+!Idrivers/message/fusion/mptctl.c
+!Idrivers/message/fusion/mptspi.c
+!Idrivers/message/fusion/mptfc.c
+!Idrivers/message/fusion/mptlan.c
+     </sect1>
+     <sect1><title>I2O message devices</title>
+!Iinclude/linux/i2o.h
+!Idrivers/message/i2o/core.h
+!Edrivers/message/i2o/iop.c
+!Idrivers/message/i2o/iop.c
+!Idrivers/message/i2o/config-osm.c
+!Edrivers/message/i2o/exec-osm.c
+!Idrivers/message/i2o/exec-osm.c
+!Idrivers/message/i2o/bus-osm.c
+!Edrivers/message/i2o/device.c
+!Idrivers/message/i2o/device.c
+!Idrivers/message/i2o/driver.c
+!Idrivers/message/i2o/pci.c
+!Idrivers/message/i2o/i2o_block.c
+!Idrivers/message/i2o/i2o_scsi.c
+!Idrivers/message/i2o/i2o_proc.c
+     </sect1>
+  </chapter>
+
+  <chapter id="snddev">
+     <title>Sound Devices</title>
+!Iinclude/sound/core.h
+!Esound/sound_core.c
+!Iinclude/sound/pcm.h
+!Esound/core/pcm.c
+!Esound/core/device.c
+!Esound/core/info.c
+!Esound/core/rawmidi.c
+!Esound/core/sound.c
+!Esound/core/memory.c
+!Esound/core/pcm_memory.c
+!Esound/core/init.c
+!Esound/core/isadma.c
+!Esound/core/control.c
+!Esound/core/pcm_lib.c
+!Esound/core/hwdep.c
+!Esound/core/pcm_native.c
+!Esound/core/memalloc.c
+<!-- FIXME: Removed for now since no structured comments in source
+X!Isound/sound_firmware.c
+-->
+  </chapter>
+
+  <chapter id="uart16x50">
+     <title>16x50 UART Driver</title>
+!Iinclude/linux/serial_core.h
+!Edrivers/serial/serial_core.c
+!Edrivers/serial/8250.c
+  </chapter>
+
+  <chapter id="fbdev">
+     <title>Frame Buffer Library</title>
+
+     <para>
+       The frame buffer drivers depend heavily on four data structures.
+       These structures are declared in include/linux/fb.h.  They are
+       fb_info, fb_var_screeninfo, fb_fix_screeninfo and fb_monospecs.
+       The last three can be made available to and from userland.
+     </para>
+
+     <para>
+       fb_info defines the current state of a particular video card.
+       Inside fb_info, there exists a fb_ops structure which is a
+       collection of needed functions to make fbdev and fbcon work.
+       fb_info is only visible to the kernel.
+     </para>
+
+     <para>
+       fb_var_screeninfo is used to describe the features of a video card
+       that are user defined.  With fb_var_screeninfo, things such as
+       depth and the resolution may be defined.
+     </para>
+
+     <para>
+       The next structure is fb_fix_screeninfo. This defines the
+       properties of a card that are created when a mode is set and can't
+       be changed otherwise.  A good example of this is the start of the
+       frame buffer memory.  This "locks" the address of the frame buffer
+       memory, so that it cannot be changed or moved.
+     </para>
+
+     <para>
+       The last structure is fb_monospecs. In the old API, there was
+       little importance for fb_monospecs. This allowed for forbidden things
+       such as setting a mode of 800x600 on a fix frequency monitor. With
+       the new API, fb_monospecs prevents such things, and if used
+       correctly, can prevent a monitor from being cooked.  fb_monospecs
+       will not be useful until kernels 2.5.x.
+     </para>
+
+     <sect1><title>Frame Buffer Memory</title>
+!Edrivers/video/fbmem.c
+     </sect1>
+<!--
+     <sect1><title>Frame Buffer Console</title>
+X!Edrivers/video/console/fbcon.c
+     </sect1>
+-->
+     <sect1><title>Frame Buffer Colormap</title>
+!Edrivers/video/fbcmap.c
+     </sect1>
+<!-- FIXME:
+  drivers/video/fbgen.c has no docs, which stuffs up the sgml.  Comment
+  out until somebody adds docs.  KAO
+     <sect1><title>Frame Buffer Generic Functions</title>
+X!Idrivers/video/fbgen.c
+     </sect1>
+KAO -->
+     <sect1><title>Frame Buffer Video Mode Database</title>
+!Idrivers/video/modedb.c
+!Edrivers/video/modedb.c
+     </sect1>
+     <sect1><title>Frame Buffer Macintosh Video Mode Database</title>
+!Edrivers/video/macmodes.c
+     </sect1>
+     <sect1><title>Frame Buffer Fonts</title>
+        <para>
+           Refer to the file drivers/video/console/fonts.c for more information.
+        </para>
+<!-- FIXME: Removed for now since no structured comments in source
+X!Idrivers/video/console/fonts.c
+-->
+     </sect1>
+  </chapter>
+
+  <chapter id="input_subsystem">
+     <title>Input Subsystem</title>
+!Iinclude/linux/input.h
+!Edrivers/input/input.c
+!Edrivers/input/ff-core.c
+!Edrivers/input/ff-memless.c
+  </chapter>
+
+  <chapter id="spi">
+      <title>Serial Peripheral Interface (SPI)</title>
+  <para>
+	SPI is the "Serial Peripheral Interface", widely used with
+	embedded systems because it is a simple and efficient
+	interface:  basically a multiplexed shift register.
+	Its three signal wires hold a clock (SCK, often in the range
+	of 1-20 MHz), a "Master Out, Slave In" (MOSI) data line, and
+	a "Master In, Slave Out" (MISO) data line.
+	SPI is a full duplex protocol; for each bit shifted out the
+	MOSI line (one per clock) another is shifted in on the MISO line.
+	Those bits are assembled into words of various sizes on the
+	way to and from system memory.
+	An additional chipselect line is usually active-low (nCS);
+	four signals are normally used for each peripheral, plus
+	sometimes an interrupt.
+  </para>
+  <para>
+	The SPI bus facilities listed here provide a generalized
+	interface to declare SPI busses and devices, manage them
+	according to the standard Linux driver model, and perform
+	input/output operations.
+	At this time, only "master" side interfaces are supported,
+	where Linux talks to SPI peripherals and does not implement
+	such a peripheral itself.
+	(Interfaces to support implementing SPI slaves would
+	necessarily look different.)
+  </para>
+  <para>
+	The programming interface is structured around two kinds of driver,
+	and two kinds of device.
+	A "Controller Driver" abstracts the controller hardware, which may
+	be as simple as a set of GPIO pins or as complex as a pair of FIFOs
+	connected to dual DMA engines on the other side of the SPI shift
+	register (maximizing throughput).  Such drivers bridge between
+	whatever bus they sit on (often the platform bus) and SPI, and
+	expose the SPI side of their device as a
+	<structname>struct spi_master</structname>.
+	SPI devices are children of that master, represented as a
+	<structname>struct spi_device</structname> and manufactured from
+	<structname>struct spi_board_info</structname> descriptors which
+	are usually provided by board-specific initialization code.
+	A <structname>struct spi_driver</structname> is called a
+	"Protocol Driver", and is bound to a spi_device using normal
+	driver model calls.
+  </para>
+  <para>
+	The I/O model is a set of queued messages.  Protocol drivers
+	submit one or more <structname>struct spi_message</structname>
+	objects, which are processed and completed asynchronously.
+	(There are synchronous wrappers, however.)  Messages are
+	built from one or more <structname>struct spi_transfer</structname>
+	objects, each of which wraps a full duplex SPI transfer.
+	A variety of protocol tweaking options are needed, because
+	different chips adopt very different policies for how they
+	use the bits transferred with SPI.
+  </para>
+!Iinclude/linux/spi/spi.h
+!Fdrivers/spi/spi.c spi_register_board_info
+!Edrivers/spi/spi.c
+  </chapter>
+
+  <chapter id="i2c">
+     <title>I<superscript>2</superscript>C and SMBus Subsystem</title>
+
+     <para>
+	I<superscript>2</superscript>C (or without fancy typography, "I2C")
+	is an acronym for the "Inter-IC" bus, a simple bus protocol which is
+	widely used where low data rate communications suffice.
+	Since it's also a licensed trademark, some vendors use another
+	name (such as "Two-Wire Interface", TWI) for the same bus.
+	I2C only needs two signals (SCL for clock, SDA for data), conserving
+	board real estate and minimizing signal quality issues.
+	Most I2C devices use seven bit addresses, and bus speeds of up
+	to 400 kHz; there's a high speed extension (3.4 MHz) that's not yet
+	found wide use.
+	I2C is a multi-master bus; open drain signaling is used to
+	arbitrate between masters, as well as to handshake and to
+	synchronize clocks from slower clients.
+     </para>
+
+     <para>
+	The Linux I2C programming interfaces support only the master
+	side of bus interactions, not the slave side.
+	The programming interface is structured around two kinds of driver,
+	and two kinds of device.
+	An I2C "Adapter Driver" abstracts the controller hardware; it binds
+	to a physical device (perhaps a PCI device or platform_device) and
+	exposes a <structname>struct i2c_adapter</structname> representing
+	each I2C bus segment it manages.
+	On each I2C bus segment will be I2C devices represented by a
+	<structname>struct i2c_client</structname>.  Those devices will
+	be bound to a <structname>struct i2c_driver</structname>,
+	which should follow the standard Linux driver model.
+	(At this writing, a legacy model is more widely used.)
+	There are functions to perform various I2C protocol operations; at
+	this writing all such functions are usable only from task context.
+     </para>
+
+     <para>
+	The System Management Bus (SMBus) is a sibling protocol.  Most SMBus
+	systems are also I2C conformant.  The electrical constraints are
+	tighter for SMBus, and it standardizes particular protocol messages
+	and idioms.  Controllers that support I2C can also support most
+	SMBus operations, but SMBus controllers don't support all the protocol
+	options that an I2C controller will.
+	There are functions to perform various SMBus protocol operations,
+	either using I2C primitives or by issuing SMBus commands to
+	i2c_adapter devices which don't support those I2C operations.
+     </para>
+
+!Iinclude/linux/i2c.h
+!Fdrivers/i2c/i2c-boardinfo.c i2c_register_board_info
+!Edrivers/i2c/i2c-core.c
+  </chapter>
+
+</book>

Documentation/DocBook/kernel-api.tmpl

@@ -38,58 +38,6 @@
 
 <toc></toc>
 
-  <chapter id="Basics">
-     <title>Driver Basics</title>
-     <sect1><title>Driver Entry and Exit points</title>
-!Iinclude/linux/init.h
-     </sect1>
-
-     <sect1><title>Atomic and pointer manipulation</title>
-!Iarch/x86/include/asm/atomic_32.h
-!Iarch/x86/include/asm/unaligned.h
-     </sect1>
-
-     <sect1><title>Delaying, scheduling, and timer routines</title>
-!Iinclude/linux/sched.h
-!Ekernel/sched.c
-!Ekernel/timer.c
-     </sect1>
-     <sect1><title>High-resolution timers</title>
-!Iinclude/linux/ktime.h
-!Iinclude/linux/hrtimer.h
-!Ekernel/hrtimer.c
-     </sect1>
-     <sect1><title>Workqueues and Kevents</title>
-!Ekernel/workqueue.c
-     </sect1>
-     <sect1><title>Internal Functions</title>
-!Ikernel/exit.c
-!Ikernel/signal.c
-!Iinclude/linux/kthread.h
-!Ekernel/kthread.c
-     </sect1>
-
-     <sect1><title>Kernel objects manipulation</title>
-<!--
-X!Iinclude/linux/kobject.h
--->
-!Elib/kobject.c
-     </sect1>
-
-     <sect1><title>Kernel utility functions</title>
-!Iinclude/linux/kernel.h
-!Ekernel/printk.c
-!Ekernel/panic.c
-!Ekernel/sys.c
-!Ekernel/rcupdate.c
-     </sect1>
-
-     <sect1><title>Device Resource Management</title>
-!Edrivers/base/devres.c
-     </sect1>
-
-  </chapter>
-
   <chapter id="adt">
      <title>Data Types</title>
      <sect1><title>Doubly Linked Lists</title>
@@ -298,62 +246,6 @@ X!Earch/x86/kernel/mca_32.c
 !Ikernel/acct.c
   </chapter>
 
-  <chapter id="devdrivers">
-     <title>Device drivers infrastructure</title>
-     <sect1><title>Device Drivers Base</title>
-<!--
-X!Iinclude/linux/device.h
--->
-!Edrivers/base/driver.c
-!Edrivers/base/core.c
-!Edrivers/base/class.c
-!Edrivers/base/firmware_class.c
-!Edrivers/base/transport_class.c
-<!-- Cannot be included, because
-     attribute_container_add_class_device_adapter
- and attribute_container_classdev_to_container
-     exceed allowed 44 characters maximum
-X!Edrivers/base/attribute_container.c
--->
-!Edrivers/base/sys.c
-<!--
-X!Edrivers/base/interface.c
--->
-!Edrivers/base/platform.c
-!Edrivers/base/bus.c
-     </sect1>
-     <sect1><title>Device Drivers Power Management</title>
-!Edrivers/base/power/main.c
-     </sect1>
-     <sect1><title>Device Drivers ACPI Support</title>
-<!-- Internal functions only
-X!Edrivers/acpi/sleep/main.c
-X!Edrivers/acpi/sleep/wakeup.c
-X!Edrivers/acpi/motherboard.c
-X!Edrivers/acpi/bus.c
--->
-!Edrivers/acpi/scan.c
-!Idrivers/acpi/scan.c
-<!-- No correct structured comments
-X!Edrivers/acpi/pci_bind.c
--->
-     </sect1>
-     <sect1><title>Device drivers PnP support</title>
-!Idrivers/pnp/core.c
-<!-- No correct structured comments
-X!Edrivers/pnp/system.c
- -->
-!Edrivers/pnp/card.c
-!Idrivers/pnp/driver.c
-!Edrivers/pnp/manager.c
-!Edrivers/pnp/support.c
-     </sect1>
-     <sect1><title>Userspace IO devices</title>
-!Edrivers/uio/uio.c
-!Iinclude/linux/uio_driver.h
-     </sect1>
-  </chapter>
-
   <chapter id="blkdev">
      <title>Block Devices</title>
 !Eblock/blk-core.c
@@ -381,275 +273,6 @@ X!Edrivers/pnp/system.c
 !Edrivers/char/misc.c
   </chapter>
 
-  <chapter id="parportdev">
-     <title>Parallel Port Devices</title>
-!Iinclude/linux/parport.h
-!Edrivers/parport/ieee1284.c
-!Edrivers/parport/share.c
-!Idrivers/parport/daisy.c
-  </chapter>
-
-  <chapter id="message_devices">
-	<title>Message-based devices</title>
-     <sect1><title>Fusion message devices</title>
-!Edrivers/message/fusion/mptbase.c
-!Idrivers/message/fusion/mptbase.c
-!Edrivers/message/fusion/mptscsih.c
-!Idrivers/message/fusion/mptscsih.c
-!Idrivers/message/fusion/mptctl.c
-!Idrivers/message/fusion/mptspi.c
-!Idrivers/message/fusion/mptfc.c
-!Idrivers/message/fusion/mptlan.c
-     </sect1>
-     <sect1><title>I2O message devices</title>
-!Iinclude/linux/i2o.h
-!Idrivers/message/i2o/core.h
-!Edrivers/message/i2o/iop.c
-!Idrivers/message/i2o/iop.c
-!Idrivers/message/i2o/config-osm.c
-!Edrivers/message/i2o/exec-osm.c
-!Idrivers/message/i2o/exec-osm.c
-!Idrivers/message/i2o/bus-osm.c
-!Edrivers/message/i2o/device.c
-!Idrivers/message/i2o/device.c
-!Idrivers/message/i2o/driver.c
-!Idrivers/message/i2o/pci.c
-!Idrivers/message/i2o/i2o_block.c
-!Idrivers/message/i2o/i2o_scsi.c
-!Idrivers/message/i2o/i2o_proc.c
-     </sect1>
-  </chapter>
-
-  <chapter id="snddev">
-     <title>Sound Devices</title>
-!Iinclude/sound/core.h
-!Esound/sound_core.c
-!Iinclude/sound/pcm.h
-!Esound/core/pcm.c
-!Esound/core/device.c
-!Esound/core/info.c
-!Esound/core/rawmidi.c
-!Esound/core/sound.c
-!Esound/core/memory.c
-!Esound/core/pcm_memory.c
-!Esound/core/init.c
-!Esound/core/isadma.c
-!Esound/core/control.c
-!Esound/core/pcm_lib.c
-!Esound/core/hwdep.c
-!Esound/core/pcm_native.c
-!Esound/core/memalloc.c
-<!-- FIXME: Removed for now since no structured comments in source
-X!Isound/sound_firmware.c
--->
-  </chapter>
-
-  <chapter id="uart16x50">
-     <title>16x50 UART Driver</title>
-!Iinclude/linux/serial_core.h
-!Edrivers/serial/serial_core.c
-!Edrivers/serial/8250.c
-  </chapter>
-
-  <chapter id="fbdev">
-     <title>Frame Buffer Library</title>
-
-     <para>
-       The frame buffer drivers depend heavily on four data structures.  
-       These structures are declared in include/linux/fb.h.  They are 
-       fb_info, fb_var_screeninfo, fb_fix_screeninfo and fb_monospecs. 
-       The last three can be made available to and from userland. 
-     </para>
-
-     <para>
-       fb_info defines the current state of a particular video card. 
-       Inside fb_info, there exists a fb_ops structure which is a 
-       collection of needed functions to make fbdev and fbcon work.
-       fb_info is only visible to the kernel.
-     </para>
-
-     <para>
-       fb_var_screeninfo is used to describe the features of a video card 
-       that are user defined.  With fb_var_screeninfo, things such as
-       depth and the resolution may be defined.
-     </para>
-
-     <para>
-       The next structure is fb_fix_screeninfo. This defines the 
-       properties of a card that are created when a mode is set and can't 
-       be changed otherwise.  A good example of this is the start of the 
-       frame buffer memory.  This "locks" the address of the frame buffer
-       memory, so that it cannot be changed or moved.
-     </para>
-
-     <para>
-       The last structure is fb_monospecs. In the old API, there was 
-       little importance for fb_monospecs. This allowed for forbidden things 
-       such as setting a mode of 800x600 on a fix frequency monitor. With 
-       the new API, fb_monospecs prevents such things, and if used 
-       correctly, can prevent a monitor from being cooked.  fb_monospecs
-       will not be useful until kernels 2.5.x.
-     </para>
-
-     <sect1><title>Frame Buffer Memory</title>
-!Edrivers/video/fbmem.c
-     </sect1>
-<!--
-     <sect1><title>Frame Buffer Console</title>
-X!Edrivers/video/console/fbcon.c
-     </sect1>
--->
-     <sect1><title>Frame Buffer Colormap</title>
-!Edrivers/video/fbcmap.c
-     </sect1>
-<!-- FIXME:
-  drivers/video/fbgen.c has no docs, which stuffs up the sgml.  Comment
-  out until somebody adds docs.  KAO
-     <sect1><title>Frame Buffer Generic Functions</title>
-X!Idrivers/video/fbgen.c
-     </sect1>
-KAO -->
-     <sect1><title>Frame Buffer Video Mode Database</title>
-!Idrivers/video/modedb.c
-!Edrivers/video/modedb.c
-     </sect1>
-     <sect1><title>Frame Buffer Macintosh Video Mode Database</title>
-!Edrivers/video/macmodes.c
-     </sect1>
-     <sect1><title>Frame Buffer Fonts</title>
-        <para>
-           Refer to the file drivers/video/console/fonts.c for more information.
-        </para>
-<!-- FIXME: Removed for now since no structured comments in source
-X!Idrivers/video/console/fonts.c
--->
-     </sect1>
-  </chapter>
-
-  <chapter id="input_subsystem">
-     <title>Input Subsystem</title>
-!Iinclude/linux/input.h
-!Edrivers/input/input.c
-!Edrivers/input/ff-core.c
-!Edrivers/input/ff-memless.c
-  </chapter>
-
-  <chapter id="spi">
-      <title>Serial Peripheral Interface (SPI)</title>
-  <para>
-	SPI is the "Serial Peripheral Interface", widely used with
-	embedded systems because it is a simple and efficient
-	interface:  basically a multiplexed shift register.
-	Its three signal wires hold a clock (SCK, often in the range
-	of 1-20 MHz), a "Master Out, Slave In" (MOSI) data line, and
-	a "Master In, Slave Out" (MISO) data line.
-	SPI is a full duplex protocol; for each bit shifted out the
-	MOSI line (one per clock) another is shifted in on the MISO line.
-	Those bits are assembled into words of various sizes on the
-	way to and from system memory.
-	An additional chipselect line is usually active-low (nCS);
-	four signals are normally used for each peripheral, plus
-	sometimes an interrupt.
-  </para>
-  <para>
-	The SPI bus facilities listed here provide a generalized
-	interface to declare SPI busses and devices, manage them
-	according to the standard Linux driver model, and perform
-	input/output operations.
-	At this time, only "master" side interfaces are supported,
-	where Linux talks to SPI peripherals and does not implement
-	such a peripheral itself.
-	(Interfaces to support implementing SPI slaves would
-	necessarily look different.)
-  </para>
-  <para>
-	The programming interface is structured around two kinds of driver,
-	and two kinds of device.
-	A "Controller Driver" abstracts the controller hardware, which may
-	be as simple as a set of GPIO pins or as complex as a pair of FIFOs
-	connected to dual DMA engines on the other side of the SPI shift
-	register (maximizing throughput).  Such drivers bridge between
-	whatever bus they sit on (often the platform bus) and SPI, and
-	expose the SPI side of their device as a
-	<structname>struct spi_master</structname>.
-	SPI devices are children of that master, represented as a
-	<structname>struct spi_device</structname> and manufactured from
-	<structname>struct spi_board_info</structname> descriptors which
-	are usually provided by board-specific initialization code.
-	A <structname>struct spi_driver</structname> is called a
-	"Protocol Driver", and is bound to a spi_device using normal
-	driver model calls.
-  </para>
-  <para>
-	The I/O model is a set of queued messages.  Protocol drivers
-	submit one or more <structname>struct spi_message</structname>
-	objects, which are processed and completed asynchronously.
-	(There are synchronous wrappers, however.)  Messages are
-	built from one or more <structname>struct spi_transfer</structname>
-	objects, each of which wraps a full duplex SPI transfer.
-	A variety of protocol tweaking options are needed, because
-	different chips adopt very different policies for how they
-	use the bits transferred with SPI.
-  </para>
-!Iinclude/linux/spi/spi.h
-!Fdrivers/spi/spi.c spi_register_board_info
-!Edrivers/spi/spi.c
-  </chapter>
-
-  <chapter id="i2c">
-     <title>I<superscript>2</superscript>C and SMBus Subsystem</title>
-
-     <para>
-	I<superscript>2</superscript>C (or without fancy typography, "I2C")
-	is an acronym for the "Inter-IC" bus, a simple bus protocol which is
-	widely used where low data rate communications suffice.
-	Since it's also a licensed trademark, some vendors use another
-	name (such as "Two-Wire Interface", TWI) for the same bus.
-	I2C only needs two signals (SCL for clock, SDA for data), conserving
-	board real estate and minimizing signal quality issues.
-	Most I2C devices use seven bit addresses, and bus speeds of up
-	to 400 kHz; there's a high speed extension (3.4 MHz) that's not yet
-	found wide use.
-	I2C is a multi-master bus; open drain signaling is used to
-	arbitrate between masters, as well as to handshake and to
-	synchronize clocks from slower clients.
-     </para>
-
-     <para>
-	The Linux I2C programming interfaces support only the master
-	side of bus interactions, not the slave side.
-	The programming interface is structured around two kinds of driver,
-	and two kinds of device.
-	An I2C "Adapter Driver" abstracts the controller hardware; it binds
-	to a physical device (perhaps a PCI device or platform_device) and
-	exposes a <structname>struct i2c_adapter</structname> representing
-	each I2C bus segment it manages.
-	On each I2C bus segment will be I2C devices represented by a
-	<structname>struct i2c_client</structname>.  Those devices will
-	be bound to a <structname>struct i2c_driver</structname>,
-	which should follow the standard Linux driver model.
-	(At this writing, a legacy model is more widely used.)
-	There are functions to perform various I2C protocol operations; at
-	this writing all such functions are usable only from task context.
-     </para>
-
-     <para>
-	The System Management Bus (SMBus) is a sibling protocol.  Most SMBus
-	systems are also I2C conformant.  The electrical constraints are
-	tighter for SMBus, and it standardizes particular protocol messages
-	and idioms.  Controllers that support I2C can also support most
-	SMBus operations, but SMBus controllers don't support all the protocol
-	options that an I2C controller will.
-	There are functions to perform various SMBus protocol operations,
-	either using I2C primitives or by issuing SMBus commands to
-	i2c_adapter devices which don't support those I2C operations.
-     </para>
-
-!Iinclude/linux/i2c.h
-!Fdrivers/i2c/i2c-boardinfo.c i2c_register_board_info
-!Edrivers/i2c/i2c-core.c
-  </chapter>
-
   <chapter id="clk">
      <title>Clock Framework</title>
 

Documentation/PCI/PCIEBUS-HOWTO.txt

@@ -93,7 +93,7 @@ the PCI Express Port Bus driver from loading a service driver.
 
 int pcie_port_service_register(struct pcie_port_service_driver *new)
 
-This API replaces the Linux Driver Model's pci_module_init API. A
+This API replaces the Linux Driver Model's pci_register_driver API. A
 service driver should always calls pcie_port_service_register at
 module init. Note that after service driver being loaded, calls
 such as pci_enable_device(dev) and pci_set_master(dev) are no longer

Documentation/cgroups/cgroups.txt

@@ -252,10 +252,8 @@ cgroup file system directories.
 When a task is moved from one cgroup to another, it gets a new
 css_set pointer - if there's an already existing css_set with the
 desired collection of cgroups then that group is reused, else a new
-css_set is allocated. Note that the current implementation uses a
-linear search to locate an appropriate existing css_set, so isn't
-very efficient. A future version will use a hash table for better
-performance.
+css_set is allocated. The appropriate existing css_set is located by
+looking into a hash table.
 
 To allow access from a cgroup to the css_sets (and hence tasks)
 that comprise it, a set of cg_cgroup_link objects form a lattice;

Documentation/cgroups/cpusets.txt

@@ -142,7 +142,7 @@ into the rest of the kernel, none in performance critical paths:
  - in fork and exit, to attach and detach a task from its cpuset.
  - in sched_setaffinity, to mask the requested CPUs by what's
    allowed in that tasks cpuset.
- - in sched.c migrate_all_tasks(), to keep migrating tasks within
+ - in sched.c migrate_live_tasks(), to keep migrating tasks within
    the CPUs allowed by their cpuset, if possible.
  - in the mbind and set_mempolicy system calls, to mask the requested
    Memory Nodes by what's allowed in that tasks cpuset.
@@ -175,6 +175,10 @@ files describing that cpuset:
  - mem_exclusive flag: is memory placement exclusive?
  - mem_hardwall flag:  is memory allocation hardwalled
  - memory_pressure: measure of how much paging pressure in cpuset
+ - memory_spread_page flag: if set, spread page cache evenly on allowed nodes
+ - memory_spread_slab flag: if set, spread slab cache evenly on allowed nodes
+ - sched_load_balance flag: if set, load balance within CPUs on that cpuset
+ - sched_relax_domain_level: the searching range when migrating tasks
 
 In addition, the root cpuset only has the following file:
  - memory_pressure_enabled flag: compute memory_pressure?
@@ -252,7 +256,7 @@ is causing.
 
 This is useful both on tightly managed systems running a wide mix of
 submitted jobs, which may choose to terminate or re-prioritize jobs that
-are trying to use more memory than allowed on the nodes assigned them,
+are trying to use more memory than allowed on the nodes assigned to them,
 and with tightly coupled, long running, massively parallel scientific
 computing jobs that will dramatically fail to meet required performance
 goals if they start to use more memory than allowed to them.
@@ -378,7 +382,7 @@ as cpusets and sched_setaffinity.
 The algorithmic cost of load balancing and its impact on key shared
 kernel data structures such as the task list increases more than
 linearly with the number of CPUs being balanced.  So the scheduler
-has support to  partition the systems CPUs into a number of sched
+has support to partition the systems CPUs into a number of sched
 domains such that it only load balances within each sched domain.
 Each sched domain covers some subset of the CPUs in the system;
 no two sched domains overlap; some CPUs might not be in any sched
@@ -485,17 +489,22 @@ of CPUs allowed to a cpuset having 'sched_load_balance' enabled.
 The internal kernel cpuset to scheduler interface passes from the
 cpuset code to the scheduler code a partition of the load balanced
 CPUs in the system. This partition is a set of subsets (represented
-as an array of cpumask_t) of CPUs, pairwise disjoint, that cover all
-the CPUs that must be load balanced.
-
-Whenever the 'sched_load_balance' flag changes, or CPUs come or go
-from a cpuset with this flag enabled, or a cpuset with this flag
-enabled is removed, the cpuset code builds a new such partition and
-passes it to the scheduler sched domain setup code, to have the sched
-domains rebuilt as necessary.
+as an array of struct cpumask) of CPUs, pairwise disjoint, that cover
+all the CPUs that must be load balanced.
+
+The cpuset code builds a new such partition and passes it to the
+scheduler sched domain setup code, to have the sched domains rebuilt
+as necessary, whenever:
+ - the 'sched_load_balance' flag of a cpuset with non-empty CPUs changes,
+ - or CPUs come or go from a cpuset with this flag enabled,
+ - or 'sched_relax_domain_level' value of a cpuset with non-empty CPUs
+   and with this flag enabled changes,
+ - or a cpuset with non-empty CPUs and with this flag enabled is removed,
+ - or a cpu is offlined/onlined.
 
 This partition exactly defines what sched domains the scheduler should
-setup - one sched domain for each element (cpumask_t) in the partition.
+setup - one sched domain for each element (struct cpumask) in the
+partition.
 
 The scheduler remembers the currently active sched domain partitions.
 When the scheduler routine partition_sched_domains() is invoked from
@@ -559,7 +568,7 @@ domain, the largest value among those is used.  Be careful, if one
 requests 0 and others are -1 then 0 is used.
 
 Note that modifying this file will have both good and bad effects,
-and whether it is acceptable or not will be depend on your situation.
+and whether it is acceptable or not depends on your situation.
 Don't modify this file if you are not sure.
 
 If your situation is:
@@ -600,19 +609,15 @@ to allocate a page of memory for that task.
 
 If a cpuset has its 'cpus' modified, then each task in that cpuset
 will have its allowed CPU placement changed immediately.  Similarly,
-if a tasks pid is written to a cpusets 'tasks' file, in either its
-current cpuset or another cpuset, then its allowed CPU placement is
-changed immediately.  If such a task had been bound to some subset
-of its cpuset using the sched_setaffinity() call, the task will be
-allowed to run on any CPU allowed in its new cpuset, negating the
-affect of the prior sched_setaffinity() call.
+if a tasks pid is written to another cpusets 'tasks' file, then its
+allowed CPU placement is changed immediately.  If such a task had been
+bound to some subset of its cpuset using the sched_setaffinity() call,
+the task will be allowed to run on any CPU allowed in its new cpuset,
+negating the effect of the prior sched_setaffinity() call.
 
 In summary, the memory placement of a task whose cpuset is changed is
 updated by the kernel, on the next allocation of a page for that task,
-but the processor placement is not updated, until that tasks pid is
-rewritten to the 'tasks' file of its cpuset.  This is done to avoid
-impacting the scheduler code in the kernel with a check for changes
-in a tasks processor placement.
+and the processor placement is updated immediately.
 
 Normally, once a page is allocated (given a physical page
 of main memory) then that page stays on whatever node it
@@ -681,10 +686,14 @@ and then start a subshell 'sh' in that cpuset:
   # The next line should display '/Charlie'
   cat /proc/self/cpuset
 
-In the future, a C library interface to cpusets will likely be
-available.  For now, the only way to query or modify cpusets is
-via the cpuset file system, using the various cd, mkdir, echo, cat,
-rmdir commands from the shell, or their equivalent from C.
+There are ways to query or modify cpusets:
+ - via the cpuset file system directly, using the various cd, mkdir, echo,
+   cat, rmdir commands from the shell, or their equivalent from C.
+ - via the C library libcpuset.
+ - via the C library libcgroup.
+   (http://sourceforge.net/proects/libcg/)
+ - via the python application cset.
+   (http://developer.novell.com/wiki/index.php/Cpuset)
 
 The sched_setaffinity calls can also be done at the shell prompt using
 SGI's runon or Robert Love's taskset.  The mbind and set_mempolicy
@@ -756,7 +765,7 @@ mount -t cpuset X /dev/cpuset
 
 is equivalent to
 
-mount -t cgroup -ocpuset X /dev/cpuset
+mount -t cgroup -ocpuset,noprefix X /dev/cpuset
 echo "/sbin/cpuset_release_agent" > /dev/cpuset/release_agent
 
 2.2 Adding/removing cpus

Documentation/connector/cn_test.c

@@ -137,7 +137,7 @@ static void cn_test_timer_func(unsigned long __data)
 
 		memcpy(m + 1, data, m->len);
 
-		cn_netlink_send(m, 0, gfp_any());
+		cn_netlink_send(m, 0, GFP_ATOMIC);
 		kfree(m);
 	}
 
@@ -160,10 +160,8 @@ static int cn_test_init(void)
 		goto err_out;
 	}
 
-	init_timer(&cn_test_timer);
-	cn_test_timer.function = cn_test_timer_func;
+	setup_timer(&cn_test_timer, cn_test_timer_func, 0);
 	cn_test_timer.expires = jiffies + HZ;
-	cn_test_timer.data = 0;
 	add_timer(&cn_test_timer);
 
 	return 0;

Documentation/cpu-freq/user-guide.txt

@@ -195,19 +195,3 @@ scaling_setspeed.		By "echoing" a new frequency into this
 				you can change the speed of the CPU,
 				but only within the limits of
 				scaling_min_freq and scaling_max_freq.
-				
-
-3.2 Deprecated Interfaces
--------------------------
-
-Depending on your kernel configuration, you might find the following 
-cpufreq-related files:
-/proc/cpufreq
-/proc/sys/cpu/*/speed
-/proc/sys/cpu/*/speed-min
-/proc/sys/cpu/*/speed-max
-
-These are files for deprecated interfaces to cpufreq, which offer far
-less functionality. Because of this, these interfaces aren't described
-here.
-

Documentation/driver-model/device.txt

@@ -127,9 +127,11 @@ void unlock_device(struct device * dev);
 Attributes
 ~~~~~~~~~~
 struct device_attribute {
-        struct attribute        attr;
-        ssize_t (*show)(struct device * dev, char * buf, size_t count, loff_t off);
-        ssize_t (*store)(struct device * dev, const char * buf, size_t count, loff_t off);
+	struct attribute	attr;
+	ssize_t (*show)(struct device *dev, struct device_attribute *attr,
+			char *buf);
+	ssize_t (*store)(struct device *dev, struct device_attribute *attr,
+			 const char *buf, size_t count);
 };
 
 Attributes of devices can be exported via drivers using a simple

Documentation/filesystems/sysfs-pci.txt

@@ -9,6 +9,7 @@ that support it.  For example, a given bus might look like this:
      |   |-- class
      |   |-- config
      |   |-- device
+     |   |-- enable
      |   |-- irq
      |   |-- local_cpus
      |   |-- resource
@@ -32,6 +33,7 @@ files, each with their own function.
        class		   PCI class (ascii, ro)
        config		   PCI config space (binary, rw)
        device		   PCI device (ascii, ro)
+       enable	           Whether the device is enabled (ascii, rw)
        irq		   IRQ number (ascii, ro)
        local_cpus	   nearby CPU mask (cpumask, ro)
        resource		   PCI resource host addresses (ascii, ro)
@@ -57,10 +59,19 @@ used to do actual device programming from userspace.  Note that some platforms
 don't support mmapping of certain resources, so be sure to check the return
 value from any attempted mmap.
 
+The 'enable' file provides a counter that indicates how many times the device 
+has been enabled.  If the 'enable' file currently returns '4', and a '1' is
+echoed into it, it will then return '5'.  Echoing a '0' into it will decrease
+the count.  Even when it returns to 0, though, some of the initialisation
+may not be reversed.  
+
 The 'rom' file is special in that it provides read-only access to the device's
 ROM file, if available.  It's disabled by default, however, so applications
 should write the string "1" to the file to enable it before attempting a read
-call, and disable it following the access by writing "0" to the file.
+call, and disable it following the access by writing "0" to the file.  Note
+that the device must be enabled for a rom read to return data succesfully.
+In the event a driver is not bound to the device, it can be enabled using the
+'enable' file, documented above.
 
 Accessing legacy resources through sysfs
 ----------------------------------------

Documentation/filesystems/sysfs.txt

@@ -2,8 +2,10 @@
 sysfs - _The_ filesystem for exporting kernel objects. 
 
 Patrick Mochel	<mochel@osdl.org>
+Mike Murphy <mamurph@cs.clemson.edu>
 
-10 January 2003
+Revised:    22 February 2009
+Original:   10 January 2003
 
 
 What it is:
@@ -64,12 +66,13 @@ An attribute definition is simply:
 
 struct attribute {
         char                    * name;
+        struct module		*owner;
         mode_t                  mode;
 };
 
 
-int sysfs_create_file(struct kobject * kobj, struct attribute * attr);
-void sysfs_remove_file(struct kobject * kobj, struct attribute * attr);
+int sysfs_create_file(struct kobject * kobj, const struct attribute * attr);
+void sysfs_remove_file(struct kobject * kobj, const struct attribute * attr);
 
 
 A bare attribute contains no means to read or write the value of the
@@ -80,9 +83,11 @@ a specific object type.
 For example, the driver model defines struct device_attribute like:
 
 struct device_attribute {
-        struct attribute        attr;
-        ssize_t (*show)(struct device * dev, char * buf);
-        ssize_t (*store)(struct device * dev, const char * buf);
+	struct attribute	attr;
+	ssize_t (*show)(struct device *dev, struct device_attribute *attr,
+			char *buf);
+	ssize_t (*store)(struct device *dev, struct device_attribute *attr,
+			 const char *buf, size_t count);
 };
 
 int device_create_file(struct device *, struct device_attribute *);
@@ -90,12 +95,8 @@ void device_remove_file(struct device *, struct device_attribute *);
 
 It also defines this helper for defining device attributes: 
 
-#define DEVICE_ATTR(_name, _mode, _show, _store)      \
-struct device_attribute dev_attr_##_name = {            \
-        .attr = {.name  = __stringify(_name) , .mode   = _mode },      \
-        .show   = _show,                                \
-        .store  = _store,                               \
-};
+#define DEVICE_ATTR(_name, _mode, _show, _store) \
+struct device_attribute dev_attr_##_name = __ATTR(_name, _mode, _show, _store)
 
 For example, declaring
 
@@ -107,9 +108,9 @@ static struct device_attribute dev_attr_foo = {
        .attr	= {
 		.name = "foo",
 		.mode = S_IWUSR | S_IRUGO,
+		.show = show_foo,
+		.store = store_foo,
 	},
-	.show = show_foo,
-	.store = store_foo,
 };
 
 
@@ -161,10 +162,12 @@ To read or write attributes, show() or store() methods must be
 specified when declaring the attribute. The method types should be as
 simple as those defined for device attributes:
 
-        ssize_t (*show)(struct device * dev, char * buf);
-        ssize_t (*store)(struct device * dev, const char * buf);
+ssize_t (*show)(struct device * dev, struct device_attribute * attr,
+                char * buf);
+ssize_t (*store)(struct device * dev, struct device_attribute * attr,
+                 const char * buf);
 
-IOW, they should take only an object and a buffer as parameters. 
+IOW, they should take only an object, an attribute, and a buffer as parameters.
 
 
 sysfs allocates a buffer of size (PAGE_SIZE) and passes it to the
@@ -299,14 +302,16 @@ The following interface layers currently exist in sysfs:
 Structure:
 
 struct device_attribute {
-        struct attribute        attr;
-        ssize_t (*show)(struct device * dev, char * buf);
-        ssize_t (*store)(struct device * dev, const char * buf);
+	struct attribute	attr;
+	ssize_t (*show)(struct device *dev, struct device_attribute *attr,
+			char *buf);
+	ssize_t (*store)(struct device *dev, struct device_attribute *attr,
+			 const char *buf, size_t count);
 };
 
 Declaring:
 
-DEVICE_ATTR(_name, _str, _mode, _show, _store);
+DEVICE_ATTR(_name, _mode, _show, _store);
 
 Creation/Removal:
 
@@ -342,7 +347,8 @@ Structure:
 struct driver_attribute {
         struct attribute        attr;
         ssize_t (*show)(struct device_driver *, char * buf);
-        ssize_t (*store)(struct device_driver *, const char * buf);
+        ssize_t (*store)(struct device_driver *, const char * buf,
+                         size_t count);
 };
 
 Declaring:

Documentation/filesystems/ubifs.txt

@@ -79,13 +79,6 @@ Mount options
 
 (*) == default.
 
-norm_unmount (*)	commit on unmount; the journal is committed
-			when the file-system is unmounted so that the
-			next mount does not have to replay the journal
-			and it becomes very fast;
-fast_unmount		do not commit on unmount; this option makes
-			unmount faster, but the next mount slower
-			because of the need to replay the journal.
 bulk_read		read more in one go to take advantage of flash
 			media that read faster sequentially
 no_bulk_read (*)	do not bulk-read

Documentation/hwmon/hpfall.c

@@ -0,0 +1,101 @@
+/* Disk protection for HP machines.
+ *
+ * Copyright 2008 Eric Piel
+ * Copyright 2009 Pavel Machek <pavel@suse.cz>
+ *
+ * GPLv2.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <fcntl.h>
+#include <sys/stat.h>
+#include <sys/types.h>
+#include <string.h>
+#include <stdint.h>
+#include <errno.h>
+#include <signal.h>
+
+void write_int(char *path, int i)
+{
+	char buf[1024];
+	int fd = open(path, O_RDWR);
+	if (fd < 0) {
+		perror("open");
+		exit(1);
+	}
+	sprintf(buf, "%d", i);
+	if (write(fd, buf, strlen(buf)) != strlen(buf)) {
+		perror("write");
+		exit(1);
+	}
+	close(fd);
+}
+
+void set_led(int on)
+{
+	write_int("/sys/class/leds/hp::hddprotect/brightness", on);
+}
+
+void protect(int seconds)
+{
+	write_int("/sys/block/sda/device/unload_heads", seconds*1000);
+}
+
+int on_ac(void)
+{
+//	/sys/class/power_supply/AC0/online
+}
+
+int lid_open(void)
+{
+//	/proc/acpi/button/lid/LID/state
+}
+
+void ignore_me(void)
+{
+	protect(0);
+	set_led(0);
+
+}
+
+int main(int argc, char* argv[])
+{
+       int fd, ret;
+
+       fd = open("/dev/freefall", O_RDONLY);
+       if (fd < 0) {
+               perror("open");
+               return EXIT_FAILURE;
+       }
+
+	signal(SIGALRM, ignore_me);
+
+       for (;;) {
+	       unsigned char count;
+
+               ret = read(fd, &count, sizeof(count));
+	       alarm(0);
+	       if ((ret == -1) && (errno == EINTR)) {
+		       /* Alarm expired, time to unpark the heads */
+		       continue;
+	       }
+
+               if (ret != sizeof(count)) {
+                       perror("read");
+                       break;
+               }
+
+	       protect(21);
+	       set_led(1);
+	       if (1 || on_ac() || lid_open()) {
+		       alarm(2);
+	       } else {
+		       alarm(20);
+	       }
+       }
+
+       close(fd);
+       return EXIT_SUCCESS;
+}

Documentation/hwmon/lis3lv02d

@@ -33,6 +33,14 @@ rate - reports the sampling rate of the accelerometer device in HZ
 This driver also provides an absolute input class device, allowing
 the laptop to act as a pinball machine-esque joystick.
 
+Another feature of the driver is misc device called "freefall" that
+acts similar to /dev/rtc and reacts on free-fall interrupts received
+from the device. It supports blocking operations, poll/select and
+fasync operation modes. You must read 1 bytes from the device.  The
+result is number of free-fall interrupts since the last successful
+read (or 255 if number of interrupts would not fit).
+
+
 Axes orientation
 ----------------
 

Documentation/kernel-doc-nano-HOWTO.txt

@@ -43,7 +43,8 @@ Only comments so marked will be considered by the kernel-doc scripts,
 and any comment so marked must be in kernel-doc format.  Do not use
 "/**" to be begin a comment block unless the comment block contains
 kernel-doc formatted comments.  The closing comment marker for
-kernel-doc comments can be either "*/" or "**/".
+kernel-doc comments can be either "*/" or "**/", but "*/" is
+preferred in the Linux kernel tree.
 
 Kernel-doc comments should be placed just before the function
 or data structure being described.
@@ -63,7 +64,7 @@ Example kernel-doc function comment:
  * comment lines.
  *
  * The longer description can have multiple paragraphs.
- **/
+ */
 
 The first line, with the short description, must be on a single line.
 
@@ -85,7 +86,7 @@ Example kernel-doc data structure comment.
  *		perhaps with more lines and words.
  *
  * Longer description of this structure.
- **/
+ */
 
 The kernel-doc function comments describe each parameter to the
 function, in order, with the @name lines.

Documentation/kernel-parameters.txt

@@ -134,7 +134,7 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	acpi=		[HW,ACPI,X86-64,i386]
 			Advanced Configuration and Power Interface
-			Format: { force | off | ht | strict | noirq }
+			Format: { force | off | ht | strict | noirq | rsdt }
 			force -- enable ACPI if default was off
 			off -- disable ACPI if default was on
 			noirq -- do not use ACPI for IRQ routing

Documentation/tracers/mmiotrace.txt

@@ -78,12 +78,10 @@ to view your kernel log and look for "mmiotrace has lost events" warning. If
 events were lost, the trace is incomplete. You should enlarge the buffers and
 try again. Buffers are enlarged by first seeing how large the current buffers
 are:
-$ cat /debug/tracing/trace_entries
+$ cat /debug/tracing/buffer_size_kb
 gives you a number. Approximately double this number and write it back, for
 instance:
-$ echo 0 > /debug/tracing/tracing_enabled
-$ echo 128000 > /debug/tracing/trace_entries
-$ echo 1 > /debug/tracing/tracing_enabled
+$ echo 128000 > /debug/tracing/buffer_size_kb
 Then start again from the top.
 
 If you are doing a trace for a driver project, e.g. Nouveau, you should also

MAINTAINERS

@@ -692,6 +692,13 @@ M:	kernel@wantstofly.org
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
+ARM/NUVOTON W90X900 ARM ARCHITECTURE
+P:      Wan ZongShun
+M:      mcuos.com@gmail.com
+L:      linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+W:      http://www.mcuos.com
+S:      Maintained
+
 ARPD SUPPORT
 P:	Jonathan Layes
 L:	netdev@vger.kernel.org
@@ -911,7 +918,7 @@ S:	Maintained
 BLACKFIN ARCHITECTURE
 P:	Bryan Wu
 M:	cooloney@kernel.org
-L:	uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
+L:	uclinux-dist-devel@blackfin.uclinux.org
 W:	http://blackfin.uclinux.org
 S:	Supported
 
@@ -1021,6 +1028,14 @@ M:	mb@bu3sch.de
 W:	http://bu3sch.de/btgpio.php
 S:	Maintained
 
+BTRFS FILE SYSTEM
+P:	Chris Mason
+M:	chris.mason@oracle.com
+L:	linux-btrfs@vger.kernel.org
+W:	http://btrfs.wiki.kernel.org/
+T:	git kernel.org:/pub/scm/linux/kernel/git/mason/btrfs-unstable.git
+S:	Maintained
+
 BTTV VIDEO4LINUX DRIVER
 P:	Mauro Carvalho Chehab
 M:	mchehab@infradead.org
@@ -1194,6 +1209,8 @@ S:	Supported
 CONTROL GROUPS (CGROUPS)
 P:	Paul Menage
 M:	menage@google.com
+P:	Li Zefan
+M:	lizf@cn.fujitsu.com
 L:	containers@lists.linux-foundation.org
 S:	Maintained
 
@@ -1895,10 +1912,10 @@ W:	http://gigaset307x.sourceforge.net/
 S:	Maintained
 
 HARD DRIVE ACTIVE PROTECTION SYSTEM (HDAPS) DRIVER
-P:	Robert Love
-M:	rlove@rlove.org
-M:	linux-kernel@vger.kernel.org
-W:	http://www.kernel.org/pub/linux/kernel/people/rml/hdaps/
+P:	Frank Seidel
+M:	frank@f-seidel.de
+L:	lm-sensors@lm-sensors.org
+W:	http://www.kernel.org/pub/linux/kernel/people/fseidel/hdaps/
 S:	Maintained
 
 GSPCA FINEPIX SUBDRIVER
@@ -1991,7 +2008,7 @@ S:	Maintained
 
 HIBERNATION (aka Software Suspend, aka swsusp)
 P:	Pavel Machek
-M:	pavel@suse.cz
+M:	pavel@ucw.cz
 P:	Rafael J. Wysocki
 M:	rjw@sisk.pl
 L:	linux-pm@lists.linux-foundation.org
@@ -2212,7 +2229,7 @@ P:	Sean Hefty
 M:	sean.hefty@intel.com
 P:	Hal Rosenstock
 M:	hal.rosenstock@gmail.com
-L:	general@lists.openfabrics.org
+L:	general@lists.openfabrics.org (moderated for non-subscribers)
 W:	http://www.openib.org/
 T:	git kernel.org:/pub/scm/linux/kernel/git/roland/infiniband.git
 S:	Supported
@@ -3317,8 +3334,8 @@ P:	Jeremy Fitzhardinge
 M:	jeremy@xensource.com
 P:	Chris Wright
 M:	chrisw@sous-sol.org
-P:	Zachary Amsden
-M:	zach@vmware.com
+P:	Alok Kataria
+M:	akataria@vmware.com
 P:	Rusty Russell
 M:	rusty@rustcorp.com.au
 L:	virtualization@lists.osdl.org
@@ -3529,6 +3546,12 @@ S:	Maintained
 PXA MMCI DRIVER
 S:	Orphan
 
+PXA RTC DRIVER
+P:	Robert Jarzmik
+M:	robert.jarzmik@free.fr
+L:	rtc-linux@googlegroups.com
+S:	Maintained
+
 QLOGIC QLA2XXX FC-SCSI DRIVER
 P:	Andrew Vasquez
 M:	linux-driver@qlogic.com
@@ -4156,7 +4179,7 @@ SUSPEND TO RAM
 P:	Len Brown
 M:	len.brown@intel.com
 P:	Pavel Machek
-M:	pavel@suse.cz
+M:	pavel@ucw.cz
 P:	Rafael J. Wysocki
 M:	rjw@sisk.pl
 L:	linux-pm@lists.linux-foundation.org
@@ -4277,8 +4300,8 @@ P:	Rajiv Andrade
 M:	srajiv@linux.vnet.ibm.com
 W:	http://tpmdd.sourceforge.net
 P:	Marcel Selhorst
-M:	tpm@selhorst.net
-W:	http://www.prosec.rub.de/tpm/
+M:	m.selhorst@sirrix.com
+W:	http://www.sirrix.com
 L:	tpmdd-devel@lists.sourceforge.net (moderated for non-subscribers)
 S:	Maintained
 
@@ -4908,11 +4931,11 @@ L:	zd1211-devs@lists.sourceforge.net (subscribers-only)
 S:	Maintained
 
 ZR36067 VIDEO FOR LINUX DRIVER
-P:	Ronald Bultje
-M:	rbultje@ronald.bitfreak.net
 L:	mjpeg-users@lists.sourceforge.net
+L:	linux-media@vger.kernel.org
 W:	http://mjpeg.sourceforge.net/driver-zoran/
-S:	Maintained
+T:	Mercurial http://linuxtv.org/hg/v4l-dvb
+S:	Odd Fixes
 
 ZS DECSTATION Z85C30 SERIAL DRIVER
 P:	Maciej W. Rozycki

Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 29
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc6
 NAME = Erotic Pickled Herring
 
 # *DOCUMENTATION*
@@ -389,6 +389,7 @@ PHONY += outputmakefile
 # output directory.
 outputmakefile:
 ifneq ($(KBUILD_SRC),)
+	$(Q)ln -fsn $(srctree) source
 	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile \
 	    $(srctree) $(objtree) $(VERSION) $(PATCHLEVEL)
 endif
@@ -946,7 +947,6 @@ ifneq ($(KBUILD_SRC),)
 	    mkdir -p include2;                                          \
 	    ln -fsn $(srctree)/include/asm-$(SRCARCH) include2/asm;     \
 	fi
-	ln -fsn $(srctree) source
 endif
 
 # prepare2 creates a makefile if using a separate output directory

README

@@ -188,7 +188,7 @@ CONFIGURING the kernel:
 			   values to random values.
 
    You can find more information on using the Linux kernel config tools
-   in Documentation/kbuild/make-configs.txt.
+   in Documentation/kbuild/kconfig.txt.
 
 	NOTES on "make config":
 	- having unnecessary drivers will make the kernel bigger, and can

arch/alpha/include/asm/bug.h

@@ -8,12 +8,12 @@
 
 /* ??? Would be nice to use .gprel32 here, but we can't be sure that the
    function loaded the GP, so this could fail in modules.  */
-#define BUG()	{							\
+#define BUG()	do {							\
 	__asm__ __volatile__(						\
 		"call_pal %0  # bugchk\n\t"				\
 		".long %1\n\t.8byte %2"					\
 		: : "i"(PAL_bugchk), "i"(__LINE__), "i"(__FILE__));	\
-	for ( ; ; ); }
+	for ( ; ; ); } while (0)
 
 #define HAVE_ARCH_BUG
 #endif

arch/alpha/kernel/process.c

@@ -93,8 +93,8 @@ common_shutdown_1(void *generic_ptr)
 	if (cpuid != boot_cpuid) {
 		flags |= 0x00040000UL; /* "remain halted" */
 		*pflags = flags;
-		cpu_clear(cpuid, cpu_present_map);
-		cpu_clear(cpuid, cpu_possible_map);
+		set_cpu_present(cpuid, false);
+		set_cpu_possible(cpuid, false);
 		halt();
 	}
 #endif
@@ -120,8 +120,8 @@ common_shutdown_1(void *generic_ptr)
 
 #ifdef CONFIG_SMP
 	/* Wait for the secondaries to halt. */
-	cpu_clear(boot_cpuid, cpu_present_map);
-	cpu_clear(boot_cpuid, cpu_possible_map);
+	set_cpu_present(boot_cpuid, false);
+	set_cpu_possible(boot_cpuid, false);
 	while (cpus_weight(cpu_present_map))
 		barrier();
 #endif

arch/alpha/kernel/smp.c

@@ -120,12 +120,12 @@ void __cpuinit
 smp_callin(void)
 {
 	int cpuid = hard_smp_processor_id();
-	cpumask_t mask = cpu_online_map;
 
-	if (cpu_test_and_set(cpuid, mask)) {
+	if (cpu_online(cpuid)) {
 		printk("??, cpu 0x%x already present??\n", cpuid);
 		BUG();
 	}
+	set_cpu_online(cpuid, true);
 
 	/* Turn on machine checks.  */
 	wrmces(7);
@@ -436,8 +436,8 @@ setup_smp(void)
 				((char *)cpubase + i*hwrpb->processor_size);
 			if ((cpu->flags & 0x1cc) == 0x1cc) {
 				smp_num_probed++;
-				cpu_set(i, cpu_possible_map);
-				cpu_set(i, cpu_present_map);
+				set_cpu_possible(i, true);
+				set_cpu_present(i, true);
 				cpu->pal_revision = boot_cpu_palrev;
 			}
 
@@ -470,8 +470,8 @@ smp_prepare_cpus(unsigned int max_cpus)
 
 	/* Nothing to do on a UP box, or when told not to.  */
 	if (smp_num_probed == 1 || max_cpus == 0) {
-		cpu_possible_map = cpumask_of_cpu(boot_cpuid);
-		cpu_present_map = cpumask_of_cpu(boot_cpuid);
+		init_cpu_possible(cpumask_of(boot_cpuid));
+		init_cpu_present(cpumask_of(boot_cpuid));
 		printk(KERN_INFO "SMP mode deactivated.\n");
 		return;
 	}

arch/arm/configs/at91sam9260ek_defconfig

@@ -608,7 +608,7 @@ CONFIG_WATCHDOG_NOWAYOUT=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-CONFIG_AT91SAM9_WATCHDOG=y
+CONFIG_AT91SAM9X_WATCHDOG=y
 
 #
 # USB-based Watchdog Cards

arch/arm/configs/at91sam9261ek_defconfig

@@ -700,7 +700,7 @@ CONFIG_WATCHDOG_NOWAYOUT=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-CONFIG_AT91SAM9_WATCHDOG=y
+CONFIG_AT91SAM9X_WATCHDOG=y
 
 #
 # USB-based Watchdog Cards

arch/arm/configs/at91sam9263ek_defconfig

@@ -710,7 +710,7 @@ CONFIG_WATCHDOG_NOWAYOUT=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-CONFIG_AT91SAM9_WATCHDOG=y
+CONFIG_AT91SAM9X_WATCHDOG=y
 
 #
 # USB-based Watchdog Cards

arch/arm/configs/at91sam9rlek_defconfig

@@ -606,7 +606,7 @@ CONFIG_WATCHDOG_NOWAYOUT=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-CONFIG_AT91SAM9_WATCHDOG=y
+CONFIG_AT91SAM9X_WATCHDOG=y
 
 #
 # Sonics Silicon Backplane

arch/arm/configs/qil-a9260_defconfig

@@ -727,7 +727,7 @@ CONFIG_WATCHDOG_NOWAYOUT=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_AT91SAM9_WATCHDOG is not set
+# CONFIG_AT91SAM9X_WATCHDOG is not set
 
 #
 # USB-based Watchdog Cards

arch/arm/kernel/elf.c

@@ -74,9 +74,9 @@ EXPORT_SYMBOL(elf_set_personality);
  */
 int arm_elf_read_implies_exec(const struct elf32_hdr *x, int executable_stack)
 {
-	if (executable_stack != EXSTACK_ENABLE_X)
+	if (executable_stack != EXSTACK_DISABLE_X)
 		return 1;
-	if (cpu_architecture() <= CPU_ARCH_ARMv6)
+	if (cpu_architecture() < CPU_ARCH_ARMv6)
 		return 1;
 	return 0;
 }

arch/arm/kernel/entry-armv.S

@@ -650,6 +650,7 @@ ENTRY(fp_enter)
 no_fp:	mov	pc, lr
 
 __und_usr_unknown:
+	enable_irq
 	mov	r0, sp
 	adr	lr, ret_from_exception
 	b	do_undefinstr

arch/arm/kernel/entry-common.S

@@ -136,7 +136,7 @@ ENTRY(mcount)
 	ldmia sp!, {r0-r3, pc}
 
 trace:
-	ldr r1, [fp, #-4]
+	ldr r1, [fp, #-4]			@ lr of instrumented routine
 	mov r0, lr
 	sub r0, r0, #MCOUNT_INSN_SIZE
 	mov lr, pc

arch/arm/kernel/irq.c

@@ -101,7 +101,7 @@ unlock:
 /* Handle bad interrupts */
 static struct irq_desc bad_irq_desc = {
 	.handle_irq = handle_bad_irq,
-	.lock = SPIN_LOCK_UNLOCKED
+	.lock = __SPIN_LOCK_UNLOCKED(bad_irq_desc.lock),
 };
 
 /*

arch/arm/kernel/machine_kexec.c

@@ -13,8 +13,8 @@
 #include <asm/cacheflush.h>
 #include <asm/mach-types.h>
 
-const extern unsigned char relocate_new_kernel[];
-const extern unsigned int relocate_new_kernel_size;
+extern const unsigned char relocate_new_kernel[];
+extern const unsigned int relocate_new_kernel_size;
 
 extern void setup_mm_for_reboot(char mode);
 

arch/arm/mach-at91/at91cap9_devices.c

@@ -697,7 +697,7 @@ static void __init at91_add_device_rtt(void)
  *  Watchdog
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
+#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
 static struct platform_device at91cap9_wdt_device = {
 	.name		= "at91_wdt",
 	.id		= -1,

arch/arm/mach-at91/at91sam9260_devices.c

@@ -643,7 +643,7 @@ static void __init at91_add_device_rtt(void)
  *  Watchdog
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
+#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
 static struct platform_device at91sam9260_wdt_device = {
 	.name		= "at91_wdt",
 	.id		= -1,

arch/arm/mach-at91/at91sam9261_devices.c

@@ -621,7 +621,7 @@ static void __init at91_add_device_rtt(void)
  *  Watchdog
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
+#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
 static struct platform_device at91sam9261_wdt_device = {
 	.name		= "at91_wdt",
 	.id		= -1,

arch/arm/mach-at91/at91sam9263_devices.c

@@ -854,7 +854,7 @@ static void __init at91_add_device_rtt(void)
  *  Watchdog
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
+#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
 static struct platform_device at91sam9263_wdt_device = {
 	.name		= "at91_wdt",
 	.id		= -1,

arch/arm/mach-at91/at91sam9rl_devices.c

@@ -609,7 +609,7 @@ static void __init at91_add_device_rtt(void)
  *  Watchdog
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
+#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
 static struct platform_device at91sam9rl_wdt_device = {
 	.name		= "at91_wdt",
 	.id		= -1,

arch/arm/mach-at91/gpio.c

@@ -490,7 +490,8 @@ postcore_initcall(at91_gpio_debugfs_init);
 
 /*--------------------------------------------------------------------------*/
 
-/* This lock class tells lockdep that GPIO irqs are in a different
+/*
+ * This lock class tells lockdep that GPIO irqs are in a different
  * category than their parents, so it won't report false recursion.
  */
 static struct lock_class_key gpio_lock_class;
@@ -509,9 +510,6 @@ void __init at91_gpio_irq_setup(void)
 		unsigned	id = this->id;
 		unsigned	i;
 
-		/* enable PIO controller's clock */
-		clk_enable(this->clock);
-
 		__raw_writel(~0, this->regbase + PIO_IDR);
 
 		for (i = 0, pin = this->chipbase; i < 32; i++, pin++) {
@@ -556,7 +554,14 @@ void __init at91_gpio_init(struct at91_gpio_bank *data, int nr_banks)
 		data->chipbase = PIN_BASE + i * 32;
 		data->regbase = data->offset + (void __iomem *)AT91_VA_BASE_SYS;
 
-		/* AT91SAM9263_ID_PIOCDE groups PIOC, PIOD, PIOE */
+		/* enable PIO controller's clock */
+		clk_enable(data->clock);
+
+		/*
+		 * Some processors share peripheral ID between multiple GPIO banks.
+		 *  SAM9263 (PIOC, PIOD, PIOE)
+		 *  CAP9 (PIOA, PIOB, PIOC, PIOD)
+		 */
 		if (last && last->id == data->id)
 			last->next = data;
 	}

arch/arm/mach-at91/include/mach/board.h

@@ -93,6 +93,7 @@ struct atmel_nand_data {
 	u8		enable_pin;	/* chip enable */
 	u8		det_pin;	/* card detect */
 	u8		rdy_pin;	/* ready/busy */
+	u8              rdy_pin_active_low;     /* rdy_pin value is inverted */
 	u8		ale;		/* address line number connected to ALE */
 	u8		cle;		/* address line number connected to CLE */
 	u8		bus_width_16;	/* buswidth is 16 bit */

arch/arm/mach-ep93xx/include/mach/gesbc9312.h

@@ -1,3 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/include/mach/gesbc9312.h
- */

arch/arm/mach-ep93xx/include/mach/hardware.h

@@ -10,7 +10,6 @@
 
 #include "platform.h"
 
-#include "gesbc9312.h"
 #include "ts72xx.h"
 
 #endif

arch/arm/mach-kirkwood/irq.c

@@ -42,7 +42,7 @@ void __init kirkwood_init_irq(void)
 	writel(0, GPIO_EDGE_CAUSE(32));
 
 	for (i = IRQ_KIRKWOOD_GPIO_START; i < NR_IRQS; i++) {
-		set_irq_chip(i, &orion_gpio_irq_level_chip);
+		set_irq_chip(i, &orion_gpio_irq_chip);
 		set_irq_handler(i, handle_level_irq);
 		irq_desc[i].status |= IRQ_LEVEL;
 		set_irq_flags(i, IRQF_VALID);

arch/arm/mach-msm/board-halibut.c

@@ -27,6 +27,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
+#include <mach/irqs.h>
 #include <mach/board.h>
 #include <mach/msm_iomap.h>
 

arch/arm/mach-mv78xx0/irq.c

@@ -40,7 +40,7 @@ void __init mv78xx0_init_irq(void)
 	writel(0, GPIO_EDGE_CAUSE(0));
 
 	for (i = IRQ_MV78XX0_GPIO_START; i < NR_IRQS; i++) {
-		set_irq_chip(i, &orion_gpio_irq_level_chip);
+		set_irq_chip(i, &orion_gpio_irq_chip);
 		set_irq_handler(i, handle_level_irq);
 		irq_desc[i].status |= IRQ_LEVEL;
 		set_irq_flags(i, IRQF_VALID);

arch/arm/mach-omap1/devices.c

@@ -181,7 +181,7 @@ void __init omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
 		}
 		size = OMAP1_MMC_SIZE;
 
-		omap_mmc_add(i, base, size, irq, mmc_data[i]);
+		omap_mmc_add("mmci-omap", i, base, size, irq, mmc_data[i]);
 	};
 }
 

arch/arm/mach-omap1/mcbsp.c

@@ -28,81 +28,8 @@
 #define DPS_RSTCT2_PER_EN	(1 << 0)
 #define DSP_RSTCT2_WD_PER_EN	(1 << 1)
 
-struct mcbsp_internal_clk {
-	struct clk clk;
-	struct clk **childs;
-	int n_childs;
-};
-
 #if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX)
-static void omap_mcbsp_clk_init(struct mcbsp_internal_clk *mclk)
-{
-	const char *clk_names[] = { "dsp_ck", "api_ck", "dspxor_ck" };
-	int i;
-
-	mclk->n_childs = ARRAY_SIZE(clk_names);
-	mclk->childs = kzalloc(mclk->n_childs * sizeof(struct clk *),
-				GFP_KERNEL);
-
-	for (i = 0; i < mclk->n_childs; i++) {
-		/* We fake a platform device to get correct device id */
-		struct platform_device pdev;
-
-		pdev.dev.bus = &platform_bus_type;
-		pdev.id = mclk->clk.id;
-		mclk->childs[i] = clk_get(&pdev.dev, clk_names[i]);
-		if (IS_ERR(mclk->childs[i]))
-			printk(KERN_ERR "Could not get clock %s (%d).\n",
-				clk_names[i], mclk->clk.id);
-	}
-}
-
-static int omap_mcbsp_clk_enable(struct clk *clk)
-{
-	struct mcbsp_internal_clk *mclk = container_of(clk,
-					struct mcbsp_internal_clk, clk);
-	int i;
-
-	for (i = 0; i < mclk->n_childs; i++)
-		clk_enable(mclk->childs[i]);
-	return 0;
-}
-
-static void omap_mcbsp_clk_disable(struct clk *clk)
-{
-	struct mcbsp_internal_clk *mclk = container_of(clk,
-					struct mcbsp_internal_clk, clk);
-	int i;
-
-	for (i = 0; i < mclk->n_childs; i++)
-		clk_disable(mclk->childs[i]);
-}
-
-static struct mcbsp_internal_clk omap_mcbsp_clks[] = {
-	{
-		.clk = {
-			.name 		= "mcbsp_clk",
-			.id		= 1,
-			.enable		= omap_mcbsp_clk_enable,
-			.disable	= omap_mcbsp_clk_disable,
-		},
-	},
-	{
-		.clk = {
-			.name 		= "mcbsp_clk",
-			.id		= 3,
-			.enable		= omap_mcbsp_clk_enable,
-			.disable	= omap_mcbsp_clk_disable,
-		},
-	},
-};
-
-#define omap_mcbsp_clks_size	ARRAY_SIZE(omap_mcbsp_clks)
-#else
-#define omap_mcbsp_clks_size	0
-static struct mcbsp_internal_clk __initdata *omap_mcbsp_clks;
-static inline void omap_mcbsp_clk_init(struct mcbsp_internal_clk *mclk)
-{ }
+const char *clk_names[] = { "dsp_ck", "api_ck", "dspxor_ck" };
 #endif
 
 static void omap1_mcbsp_request(unsigned int id)
@@ -167,8 +94,9 @@ static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = {
 		.rx_irq		= INT_McBSP1RX,
 		.tx_irq		= INT_McBSP1TX,
 		.ops		= &omap1_mcbsp_ops,
-		.clk_name	= "mcbsp_clk",
-		},
+		.clk_names	= clk_names,
+		.num_clks	= 3,
+	},
 	{
 		.phys_base	= OMAP1510_MCBSP2_BASE,
 		.dma_rx_sync	= OMAP_DMA_MCBSP2_RX,
@@ -184,7 +112,8 @@ static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = {
 		.rx_irq		= INT_McBSP3RX,
 		.tx_irq		= INT_McBSP3TX,
 		.ops		= &omap1_mcbsp_ops,
-		.clk_name	= "mcbsp_clk",
+		.clk_names	= clk_names,
+		.num_clks	= 3,
 	},
 };
 #define OMAP15XX_MCBSP_PDATA_SZ		ARRAY_SIZE(omap15xx_mcbsp_pdata)
@@ -202,7 +131,8 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = {
 		.rx_irq		= INT_McBSP1RX,
 		.tx_irq		= INT_McBSP1TX,
 		.ops		= &omap1_mcbsp_ops,
-		.clk_name	= "mcbsp_clk",
+		.clk_names	= clk_names,
+		.num_clks	= 3,
 	},
 	{
 		.phys_base	= OMAP1610_MCBSP2_BASE,
@@ -219,7 +149,8 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = {
 		.rx_irq		= INT_McBSP3RX,
 		.tx_irq		= INT_McBSP3TX,
 		.ops		= &omap1_mcbsp_ops,
-		.clk_name	= "mcbsp_clk",
+		.clk_names	= clk_names,
+		.num_clks	= 3,
 	},
 };
 #define OMAP16XX_MCBSP_PDATA_SZ		ARRAY_SIZE(omap16xx_mcbsp_pdata)
@@ -230,15 +161,6 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = {
 
 int __init omap1_mcbsp_init(void)
 {
-	int i;
-
-	for (i = 0; i < omap_mcbsp_clks_size; i++) {
-		if (cpu_is_omap15xx() || cpu_is_omap16xx()) {
-			omap_mcbsp_clk_init(&omap_mcbsp_clks[i]);
-			clk_register(&omap_mcbsp_clks[i].clk);
-		}
-	}
-
 	if (cpu_is_omap730())
 		omap_mcbsp_count = OMAP730_MCBSP_PDATA_SZ;
 	if (cpu_is_omap15xx())

arch/arm/mach-omap2/clock.c

@@ -565,7 +565,7 @@ u32 omap2_clksel_to_divisor(struct clk *clk, u32 field_val)
  *
  * Given a struct clk of a rate-selectable clksel clock, and a clock divisor,
  * find the corresponding register field value.  The return register value is
- * the value before left-shifting.  Returns 0xffffffff on error
+ * the value before left-shifting.  Returns ~0 on error
  */
 u32 omap2_divisor_to_clksel(struct clk *clk, u32 div)
 {
@@ -577,7 +577,7 @@ u32 omap2_divisor_to_clksel(struct clk *clk, u32 div)
 
 	clks = omap2_get_clksel_by_parent(clk, clk->parent);
 	if (clks == NULL)
-		return 0;
+		return ~0;
 
 	for (clkr = clks->rates; clkr->div; clkr++) {
 		if ((clkr->flags & cpu_mask) && (clkr->div == div))
@@ -588,7 +588,7 @@ u32 omap2_divisor_to_clksel(struct clk *clk, u32 div)
 		printk(KERN_ERR "clock: Could not find divisor %d for "
 		       "clock %s parent %s\n", div, clk->name,
 		       clk->parent->name);
-		return 0;
+		return ~0;
 	}
 
 	return clkr->val;
@@ -708,7 +708,7 @@ static u32 omap2_clksel_get_src_field(void __iomem **src_addr,
 		return 0;
 
 	for (clkr = clks->rates; clkr->div; clkr++) {
-		if (clkr->flags & (cpu_mask | DEFAULT_RATE))
+		if (clkr->flags & cpu_mask && clkr->flags & DEFAULT_RATE)
 			break; /* Found the default rate for this platform */
 	}
 
@@ -746,7 +746,7 @@ int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent)
 		return -EINVAL;
 
 	if (clk->usecount > 0)
-		_omap2_clk_disable(clk);
+		omap2_clk_disable(clk);
 
 	/* Set new source value (previous dividers if any in effect) */
 	reg_val = __raw_readl(src_addr) & ~field_mask;
@@ -759,11 +759,11 @@ int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent)
 		wmb();
 	}
 
-	if (clk->usecount > 0)
-		_omap2_clk_enable(clk);
-
 	clk->parent = new_parent;
 
+	if (clk->usecount > 0)
+		omap2_clk_enable(clk);
+
 	/* CLKSEL clocks follow their parents' rates, divided by a divisor */
 	clk->rate = new_parent->rate;
 

arch/arm/mach-omap2/devices.c

@@ -421,6 +421,7 @@ void __init omap2_init_mmc(struct omap_mmc_platform_data **mmc_data,
 			int nr_controllers)
 {
 	int i;
+	char *name;
 
 	for (i = 0; i < nr_controllers; i++) {
 		unsigned long base, size;
@@ -450,12 +451,14 @@ void __init omap2_init_mmc(struct omap_mmc_platform_data **mmc_data,
 			continue;
 		}
 
-		if (cpu_is_omap2420())
+		if (cpu_is_omap2420()) {
 			size = OMAP2420_MMC_SIZE;
-		else
+			name = "mmci-omap";
+		} else {
 			size = HSMMC_SIZE;
-
-		omap_mmc_add(i, base, size, irq, mmc_data[i]);
+			name = "mmci-omap-hs";
+		}
+		omap_mmc_add(name, i, base, size, irq, mmc_data[i]);
 	};
 }
 

arch/arm/mach-omap2/id.c

@@ -172,9 +172,13 @@ void __init omap34xx_check_revision(void)
 			omap_revision = OMAP3430_REV_ES3_0;
 			rev_name = "ES3.0";
 			break;
+		case 4:
+			omap_revision = OMAP3430_REV_ES3_1;
+			rev_name = "ES3.1";
+			break;
 		default:
 			/* Use the latest known revision as default */
-			omap_revision = OMAP3430_REV_ES3_0;
+			omap_revision = OMAP3430_REV_ES3_1;
 			rev_name = "Unknown revision\n";
 		}
 	}

arch/arm/mach-omap2/irq.c

@@ -134,6 +134,7 @@ static struct irq_chip omap_irq_chip = {
 	.ack	= omap_mask_ack_irq,
 	.mask	= omap_mask_irq,
 	.unmask	= omap_unmask_irq,
+	.disable = omap_mask_irq,
 };
 
 static void __init omap_irq_bank_init_one(struct omap_irq_bank *bank)

arch/arm/mach-omap2/mcbsp.c

@@ -24,106 +24,7 @@
 #include <mach/cpu.h>
 #include <mach/mcbsp.h>
 
-struct mcbsp_internal_clk {
-	struct clk clk;
-	struct clk **childs;
-	int n_childs;
-};
-
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
-static void omap_mcbsp_clk_init(struct mcbsp_internal_clk *mclk)
-{
-	const char *clk_names[] = { "mcbsp_ick", "mcbsp_fck" };
-	int i;
-
-	mclk->n_childs = ARRAY_SIZE(clk_names);
-	mclk->childs = kzalloc(mclk->n_childs * sizeof(struct clk *),
-				GFP_KERNEL);
-
-	for (i = 0; i < mclk->n_childs; i++) {
-		/* We fake a platform device to get correct device id */
-		struct platform_device pdev;
-
-		pdev.dev.bus = &platform_bus_type;
-		pdev.id = mclk->clk.id;
-		mclk->childs[i] = clk_get(&pdev.dev, clk_names[i]);
-		if (IS_ERR(mclk->childs[i]))
-			printk(KERN_ERR "Could not get clock %s (%d).\n",
-				clk_names[i], mclk->clk.id);
-	}
-}
-
-static int omap_mcbsp_clk_enable(struct clk *clk)
-{
-	struct mcbsp_internal_clk *mclk = container_of(clk,
-					struct mcbsp_internal_clk, clk);
-	int i;
-
-	for (i = 0; i < mclk->n_childs; i++)
-		clk_enable(mclk->childs[i]);
-	return 0;
-}
-
-static void omap_mcbsp_clk_disable(struct clk *clk)
-{
-	struct mcbsp_internal_clk *mclk = container_of(clk,
-					struct mcbsp_internal_clk, clk);
-	int i;
-
-	for (i = 0; i < mclk->n_childs; i++)
-		clk_disable(mclk->childs[i]);
-}
-
-static struct mcbsp_internal_clk omap_mcbsp_clks[] = {
-	{
-		.clk = {
-			.name 		= "mcbsp_clk",
-			.id		= 1,
-			.enable		= omap_mcbsp_clk_enable,
-			.disable	= omap_mcbsp_clk_disable,
-		},
-	},
-	{
-		.clk = {
-			.name 		= "mcbsp_clk",
-			.id		= 2,
-			.enable		= omap_mcbsp_clk_enable,
-			.disable	= omap_mcbsp_clk_disable,
-		},
-	},
-	{
-		.clk = {
-			.name		= "mcbsp_clk",
-			.id		= 3,
-			.enable		= omap_mcbsp_clk_enable,
-			.disable	= omap_mcbsp_clk_disable,
-		},
-	},
-	{
-		.clk = {
-			.name		= "mcbsp_clk",
-			.id		= 4,
-			.enable		= omap_mcbsp_clk_enable,
-			.disable	= omap_mcbsp_clk_disable,
-		},
-	},
-	{
-		.clk = {
-			.name		= "mcbsp_clk",
-			.id		= 5,
-			.enable		= omap_mcbsp_clk_enable,
-			.disable	= omap_mcbsp_clk_disable,
-		},
-	},
-};
-
-#define omap_mcbsp_clks_size	ARRAY_SIZE(omap_mcbsp_clks)
-#else
-#define omap_mcbsp_clks_size	0
-static struct mcbsp_internal_clk __initdata *omap_mcbsp_clks;
-static inline void omap_mcbsp_clk_init(struct clk *clk)
-{ }
-#endif
+const char *clk_names[] = { "mcbsp_ick", "mcbsp_fck" };
 
 static void omap2_mcbsp2_mux_setup(void)
 {
@@ -156,7 +57,8 @@ static struct omap_mcbsp_platform_data omap2420_mcbsp_pdata[] = {
 		.rx_irq		= INT_24XX_MCBSP1_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP1_IRQ_TX,
 		.ops		= &omap2_mcbsp_ops,
-		.clk_name	= "mcbsp_clk",
+		.clk_names	= clk_names,
+		.num_clks	= 2,
 	},
 	{
 		.phys_base	= OMAP24XX_MCBSP2_BASE,
@@ -165,7 +67,8 @@ static struct omap_mcbsp_platform_data omap2420_mcbsp_pdata[] = {
 		.rx_irq		= INT_24XX_MCBSP2_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP2_IRQ_TX,
 		.ops		= &omap2_mcbsp_ops,
-		.clk_name	= "mcbsp_clk",
+		.clk_names	= clk_names,
+		.num_clks	= 2,
 	},
 };
 #define OMAP2420_MCBSP_PDATA_SZ		ARRAY_SIZE(omap2420_mcbsp_pdata)
@@ -183,7 +86,8 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = {
 		.rx_irq		= INT_24XX_MCBSP1_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP1_IRQ_TX,
 		.ops		= &omap2_mcbsp_ops,
-		.clk_name	= "mcbsp_clk",
+		.clk_names	= clk_names,
+		.num_clks	= 2,
 	},
 	{
 		.phys_base	= OMAP24XX_MCBSP2_BASE,
@@ -192,7 +96,8 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = {
 		.rx_irq		= INT_24XX_MCBSP2_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP2_IRQ_TX,
 		.ops		= &omap2_mcbsp_ops,
-		.clk_name	= "mcbsp_clk",
+		.clk_names	= clk_names,
+		.num_clks	= 2,
 	},
 	{
 		.phys_base	= OMAP2430_MCBSP3_BASE,
@@ -201,7 +106,8 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = {
 		.rx_irq		= INT_24XX_MCBSP3_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP3_IRQ_TX,
 		.ops		= &omap2_mcbsp_ops,
-		.clk_name	= "mcbsp_clk",
+		.clk_names	= clk_names,
+		.num_clks	= 2,
 	},
 	{
 		.phys_base	= OMAP2430_MCBSP4_BASE,
@@ -210,7 +116,8 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = {
 		.rx_irq		= INT_24XX_MCBSP4_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP4_IRQ_TX,
 		.ops		= &omap2_mcbsp_ops,
-		.clk_name	= "mcbsp_clk",
+		.clk_names	= clk_names,
+		.num_clks	= 2,
 	},
 	{
 		.phys_base	= OMAP2430_MCBSP5_BASE,
@@ -219,7 +126,8 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = {
 		.rx_irq		= INT_24XX_MCBSP5_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP5_IRQ_TX,
 		.ops		= &omap2_mcbsp_ops,
-		.clk_name	= "mcbsp_clk",
+		.clk_names	= clk_names,
+		.num_clks	= 2,
 	},
 };
 #define OMAP2430_MCBSP_PDATA_SZ		ARRAY_SIZE(omap2430_mcbsp_pdata)
@@ -237,7 +145,8 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 		.rx_irq		= INT_24XX_MCBSP1_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP1_IRQ_TX,
 		.ops		= &omap2_mcbsp_ops,
-		.clk_name	= "mcbsp_clk",
+		.clk_names	= clk_names,
+		.num_clks	= 2,
 	},
 	{
 		.phys_base	= OMAP34XX_MCBSP2_BASE,
@@ -246,7 +155,8 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 		.rx_irq		= INT_24XX_MCBSP2_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP2_IRQ_TX,
 		.ops		= &omap2_mcbsp_ops,
-		.clk_name	= "mcbsp_clk",
+		.clk_names	= clk_names,
+		.num_clks	= 2,
 	},
 	{
 		.phys_base	= OMAP34XX_MCBSP3_BASE,
@@ -255,7 +165,8 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 		.rx_irq		= INT_24XX_MCBSP3_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP3_IRQ_TX,
 		.ops		= &omap2_mcbsp_ops,
-		.clk_name	= "mcbsp_clk",
+		.clk_names	= clk_names,
+		.num_clks	= 2,
 	},
 	{
 		.phys_base	= OMAP34XX_MCBSP4_BASE,
@@ -264,7 +175,8 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 		.rx_irq		= INT_24XX_MCBSP4_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP4_IRQ_TX,
 		.ops		= &omap2_mcbsp_ops,
-		.clk_name	= "mcbsp_clk",
+		.clk_names	= clk_names,
+		.num_clks	= 2,
 	},
 	{
 		.phys_base	= OMAP34XX_MCBSP5_BASE,
@@ -273,7 +185,8 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 		.rx_irq		= INT_24XX_MCBSP5_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP5_IRQ_TX,
 		.ops		= &omap2_mcbsp_ops,
-		.clk_name	= "mcbsp_clk",
+		.clk_names	= clk_names,
+		.num_clks	= 2,
 	},
 };
 #define OMAP34XX_MCBSP_PDATA_SZ		ARRAY_SIZE(omap34xx_mcbsp_pdata)
@@ -284,14 +197,6 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 
 static int __init omap2_mcbsp_init(void)
 {
-	int i;
-
-	for (i = 0; i < omap_mcbsp_clks_size; i++) {
-		/* Once we call clk_get inside init, we do not register it */
-		omap_mcbsp_clk_init(&omap_mcbsp_clks[i]);
-		clk_register(&omap_mcbsp_clks[i].clk);
-	}
-
 	if (cpu_is_omap2420())
 		omap_mcbsp_count = OMAP2420_MCBSP_PDATA_SZ;
 	if (cpu_is_omap2430())

arch/arm/mach-omap2/sleep24xx.S

@@ -93,9 +93,8 @@ ENTRY(omap24xx_cpu_suspend)
 	orr	r4, r4, #0x40		@ enable self refresh on idle req
 	mov	r5, #0x2000		@ set delay (DPLL relock + DLL relock)
 	str	r4, [r2]		@ make it so
-	mov	r2, #0
 	nop
-	mcr	p15, 0, r2, c7, c0, 4	@ wait for interrupt
+	mcr	p15, 0, r3, c7, c0, 4	@ wait for interrupt
 	nop
 loop:
 	subs	r5, r5, #0x1		@ awake, wait just a bit

arch/arm/mach-omap2/timer-gp.c

@@ -118,7 +118,8 @@ static void __init omap2_gp_clockevent_init(void)
 	clockevent_gpt.max_delta_ns =
 		clockevent_delta2ns(0xffffffff, &clockevent_gpt);
 	clockevent_gpt.min_delta_ns =
-		clockevent_delta2ns(1, &clockevent_gpt);
+		clockevent_delta2ns(3, &clockevent_gpt);
+		/* Timer internal resynch latency. */
 
 	clockevent_gpt.cpumask = cpumask_of(0);
 	clockevents_register_device(&clockevent_gpt);

arch/arm/mach-orion5x/irq.c

@@ -44,7 +44,7 @@ void __init orion5x_init_irq(void)
 	 * User can use set_type() if he wants to use edge types handlers.
 	 */
 	for (i = IRQ_ORION5X_GPIO_START; i < NR_IRQS; i++) {
-		set_irq_chip(i, &orion_gpio_irq_level_chip);
+		set_irq_chip(i, &orion_gpio_irq_chip);
 		set_irq_handler(i, handle_level_irq);
 		irq_desc[i].status |= IRQ_LEVEL;
 		set_irq_flags(i, IRQF_VALID);

arch/arm/mach-pxa/dma.c

@@ -121,20 +121,22 @@ int __init pxa_init_dma(int num_ch)
 	if (dma_channels == NULL)
 		return -ENOMEM;
 
-	ret = request_irq(IRQ_DMA, dma_irq_handler, IRQF_DISABLED, "DMA", NULL);
-	if (ret) {
-		printk (KERN_CRIT "Wow!  Can't register IRQ for DMA\n");
-		kfree(dma_channels);
-		return ret;
-	}
-
 	/* dma channel priorities on pxa2xx processors:
 	 * ch 0 - 3,  16 - 19  <--> (0) DMA_PRIO_HIGH
 	 * ch 4 - 7,  20 - 23  <--> (1) DMA_PRIO_MEDIUM
 	 * ch 8 - 15, 24 - 31  <--> (2) DMA_PRIO_LOW
 	 */
-	for (i = 0; i < num_ch; i++)
+	for (i = 0; i < num_ch; i++) {
+		DCSR(i) = 0;
 		dma_channels[i].prio = min((i & 0xf) >> 2, DMA_PRIO_LOW);
+	}
+
+	ret = request_irq(IRQ_DMA, dma_irq_handler, IRQF_DISABLED, "DMA", NULL);
+	if (ret) {
+		printk (KERN_CRIT "Wow!  Can't register IRQ for DMA\n");
+		kfree(dma_channels);
+		return ret;
+	}
 
 	num_dma_channels = num_ch;
 	return 0;

arch/arm/mach-pxa/include/mach/regs-ac97.h

@@ -1,6 +1,8 @@
 #ifndef __ASM_ARCH_REGS_AC97_H
 #define __ASM_ARCH_REGS_AC97_H
 
+#include <mach/hardware.h>
+
 /*
  * AC97 Controller registers
  */

arch/arm/mach-pxa/include/mach/regs-ssp.h

@@ -41,6 +41,9 @@
 #elif defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
 #define SSCR0_SCR	(0x000fff00)	/* Serial Clock Rate (mask) */
 #define SSCR0_SerClkDiv(x) (((x) - 1) << 8) /* Divisor [1..4096] */
+#endif
+
+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
 #define SSCR0_EDSS	(1 << 20)	/* Extended data size select */
 #define SSCR0_NCS	(1 << 21)	/* Network clock select */
 #define SSCR0_RIM	(1 << 22)	/* Receive FIFO overrrun interrupt mask */

arch/arm/mach-pxa/pxa300.c

@@ -88,13 +88,13 @@ static struct pxa3xx_mfp_addr_map pxa310_mfp_addr_map[] __initdata = {
 static DEFINE_PXA3_CKEN(common_nand, NAND, 156000000, 0);
 
 static struct clk_lookup common_clkregs[] = {
-	INIT_CLKREG(&clk_common_nand, "pxa3xx-nand", "NANDCLK"),
+	INIT_CLKREG(&clk_common_nand, "pxa3xx-nand", NULL),
 };
 
 static DEFINE_PXA3_CKEN(pxa310_mmc3, MMC3, 19500000, 0);
 
 static struct clk_lookup pxa310_clkregs[] = {
-	INIT_CLKREG(&clk_pxa310_mmc3, "pxa2xx-mci.2", "MMCCLK"),
+	INIT_CLKREG(&clk_pxa310_mmc3, "pxa2xx-mci.2", NULL),
 };
 
 static int __init pxa300_init(void)

arch/arm/mach-pxa/pxa320.c

@@ -83,7 +83,7 @@ static struct pxa3xx_mfp_addr_map pxa320_mfp_addr_map[] __initdata = {
 static DEFINE_PXA3_CKEN(pxa320_nand, NAND, 104000000, 0);
 
 static struct clk_lookup pxa320_clkregs[] = {
-	INIT_CLKREG(&clk_pxa320_nand, "pxa3xx-nand", "NANDCLK"),
+	INIT_CLKREG(&clk_pxa320_nand, "pxa3xx-nand", NULL),
 };
 
 static int __init pxa320_init(void)

arch/arm/mach-sa1100/generic.c

@@ -289,7 +289,7 @@ static struct platform_device sa11x0pcmcia_device = {
 };
 
 static struct platform_device sa11x0mtd_device = {
-	.name		= "flash",
+	.name		= "sa1100-mtd",
 	.id		= -1,
 };
 

arch/arm/mm/fault-armv.c

@@ -66,7 +66,10 @@ static int adjust_pte(struct vm_area_struct *vma, unsigned long address)
 	 * fault (ie, is old), we can safely ignore any issues.
 	 */
 	if (ret && (pte_val(entry) & L_PTE_MT_MASK) != shared_pte_mask) {
-		flush_cache_page(vma, address, pte_pfn(entry));
+		unsigned long pfn = pte_pfn(entry);
+		flush_cache_page(vma, address, pfn);
+		outer_flush_range((pfn << PAGE_SHIFT),
+				  (pfn << PAGE_SHIFT) + PAGE_SIZE);
 		pte_val(entry) &= ~L_PTE_MT_MASK;
 		pte_val(entry) |= shared_pte_mask;
 		set_pte_at(vma->vm_mm, address, pte, entry);

arch/arm/mm/mmu.c

@@ -693,7 +693,8 @@ static void __init sanity_check_meminfo(void)
 		 * Check whether this memory bank would entirely overlap
 		 * the vmalloc area.
 		 */
-		if (__va(bank->start) >= VMALLOC_MIN) {
+		if (__va(bank->start) >= VMALLOC_MIN ||
+		    __va(bank->start) < PAGE_OFFSET) {
 			printk(KERN_NOTICE "Ignoring RAM at %.8lx-%.8lx "
 			       "(vmalloc region overlap).\n",
 			       bank->start, bank->start + bank->size - 1);

arch/arm/plat-omap/devices.c

@@ -200,14 +200,15 @@ void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config,
 /*
  * Register MMC devices. Called from mach-omap1 and mach-omap2 device init.
  */
-int __init omap_mmc_add(int id, unsigned long base, unsigned long size,
-		unsigned int irq, struct omap_mmc_platform_data *data)
+int __init omap_mmc_add(const char *name, int id, unsigned long base,
+				unsigned long size, unsigned int irq,
+				struct omap_mmc_platform_data *data)
 {
 	struct platform_device *pdev;
 	struct resource res[OMAP_MMC_NR_RES];
 	int ret;
 
-	pdev = platform_device_alloc("mmci-omap", id);
+	pdev = platform_device_alloc(name, id);
 	if (!pdev)
 		return -ENOMEM;
 

arch/arm/plat-omap/dma.c

@@ -709,6 +709,7 @@ int omap_request_dma(int dev_id, const char *dev_name,
 	chan->dev_name = dev_name;
 	chan->callback = callback;
 	chan->data = data;
+	chan->flags = 0;
 
 #ifndef CONFIG_ARCH_OMAP1
 	if (cpu_class_is_omap2()) {
@@ -1888,11 +1889,11 @@ static int omap2_dma_handle_ch(int ch)
 		status = dma_read(CSR(ch));
 	}
 
+	dma_write(status, CSR(ch));
+
 	if (likely(dma_chan[ch].callback != NULL))
 		dma_chan[ch].callback(ch, status, dma_chan[ch].data);
 
-	dma_write(status, CSR(ch));
-
 	return 0;
 }
 

arch/arm/plat-omap/include/mach/cpu.h

@@ -339,6 +339,7 @@ IS_OMAP_TYPE(3430, 0x3430)
 #define OMAP3430_REV_ES2_0	0x34301034
 #define OMAP3430_REV_ES2_1	0x34302034
 #define OMAP3430_REV_ES3_0	0x34303034
+#define OMAP3430_REV_ES3_1	0x34304034
 
 /*
  * omap_chip bits

arch/arm/plat-omap/include/mach/mcbsp.h

@@ -344,7 +344,8 @@ struct omap_mcbsp_platform_data {
 	u8 dma_rx_sync, dma_tx_sync;
 	u16 rx_irq, tx_irq;
 	struct omap_mcbsp_ops *ops;
-	char const *clk_name;
+	char const **clk_names;
+	int num_clks;
 };
 
 struct omap_mcbsp {
@@ -376,7 +377,8 @@ struct omap_mcbsp {
 	/* Protect the field .free, while checking if the mcbsp is in use */
 	spinlock_t lock;
 	struct omap_mcbsp_platform_data *pdata;
-	struct clk *clk;
+	struct clk **clks;
+	int num_clks;
 };
 extern struct omap_mcbsp **mcbsp_ptr;
 extern int omap_mcbsp_count;

arch/arm/plat-omap/include/mach/mmc.h

@@ -115,8 +115,9 @@ void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
 				int nr_controllers);
 void omap2_init_mmc(struct omap_mmc_platform_data **mmc_data,
 				int nr_controllers);
-int omap_mmc_add(int id, unsigned long base, unsigned long size,
-			unsigned int irq, struct omap_mmc_platform_data *data);
+int omap_mmc_add(const char *name, int id, unsigned long base,
+				unsigned long size, unsigned int irq,
+				struct omap_mmc_platform_data *data);
 #else
 static inline void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
 				int nr_controllers)
@@ -126,8 +127,9 @@ static inline void omap2_init_mmc(struct omap_mmc_platform_data **mmc_data,
 				int nr_controllers)
 {
 }
-static inline int omap_mmc_add(int id, unsigned long base, unsigned long size,
-		unsigned int irq, struct omap_mmc_platform_data *data)
+static inline int omap_mmc_add(const char *name, int id, unsigned long base,
+				unsigned long size, unsigned int irq,
+				struct omap_mmc_platform_data *data)
 {
 	return 0;
 }

arch/arm/plat-omap/mcbsp.c

@@ -214,6 +214,7 @@ EXPORT_SYMBOL(omap_mcbsp_set_io_type);
 int omap_mcbsp_request(unsigned int id)
 {
 	struct omap_mcbsp *mcbsp;
+	int i;
 	int err;
 
 	if (!omap_mcbsp_check_valid_id(id)) {
@@ -225,7 +226,8 @@ int omap_mcbsp_request(unsigned int id)
 	if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->request)
 		mcbsp->pdata->ops->request(id);
 
-	clk_enable(mcbsp->clk);
+	for (i = 0; i < mcbsp->num_clks; i++)
+		clk_enable(mcbsp->clks[i]);
 
 	spin_lock(&mcbsp->lock);
 	if (!mcbsp->free) {
@@ -276,6 +278,7 @@ EXPORT_SYMBOL(omap_mcbsp_request);
 void omap_mcbsp_free(unsigned int id)
 {
 	struct omap_mcbsp *mcbsp;
+	int i;
 
 	if (!omap_mcbsp_check_valid_id(id)) {
 		printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
@@ -286,7 +289,8 @@ void omap_mcbsp_free(unsigned int id)
 	if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->free)
 		mcbsp->pdata->ops->free(id);
 
-	clk_disable(mcbsp->clk);
+	for (i = mcbsp->num_clks - 1; i >= 0; i--)
+		clk_disable(mcbsp->clks[i]);
 
 	spin_lock(&mcbsp->lock);
 	if (mcbsp->free) {
@@ -872,6 +876,7 @@ static int __devinit omap_mcbsp_probe(struct platform_device *pdev)
 	struct omap_mcbsp_platform_data *pdata = pdev->dev.platform_data;
 	struct omap_mcbsp *mcbsp;
 	int id = pdev->id - 1;
+	int i;
 	int ret = 0;
 
 	if (!pdata) {
@@ -916,14 +921,25 @@ static int __devinit omap_mcbsp_probe(struct platform_device *pdev)
 	mcbsp->dma_rx_sync = pdata->dma_rx_sync;
 	mcbsp->dma_tx_sync = pdata->dma_tx_sync;
 
-	if (pdata->clk_name)
-		mcbsp->clk = clk_get(&pdev->dev, pdata->clk_name);
-	if (IS_ERR(mcbsp->clk)) {
-		dev_err(&pdev->dev,
-			"Invalid clock configuration for McBSP%d.\n",
-			mcbsp->id);
-		ret = PTR_ERR(mcbsp->clk);
-		goto err_clk;
+	if (pdata->num_clks) {
+		mcbsp->num_clks = pdata->num_clks;
+		mcbsp->clks = kzalloc(mcbsp->num_clks * sizeof(struct clk *),
+					GFP_KERNEL);
+		if (!mcbsp->clks) {
+			ret = -ENOMEM;
+			goto exit;
+		}
+		for (i = 0; i < mcbsp->num_clks; i++) {
+			mcbsp->clks[i] = clk_get(&pdev->dev, pdata->clk_names[i]);
+			if (IS_ERR(mcbsp->clks[i])) {
+				dev_err(&pdev->dev,
+					"Invalid %s configuration for McBSP%d.\n",
+					pdata->clk_names[i], mcbsp->id);
+				ret = PTR_ERR(mcbsp->clks[i]);
+				goto err_clk;
+			}
+		}
+
 	}
 
 	mcbsp->pdata = pdata;
@@ -932,6 +948,9 @@ static int __devinit omap_mcbsp_probe(struct platform_device *pdev)
 	return 0;
 
 err_clk:
+	while (i--)
+		clk_put(mcbsp->clks[i]);
+	kfree(mcbsp->clks);
 	iounmap(mcbsp->io_base);
 err_ioremap:
 	mcbsp->free = 0;
@@ -942,6 +961,7 @@ exit:
 static int __devexit omap_mcbsp_remove(struct platform_device *pdev)
 {
 	struct omap_mcbsp *mcbsp = platform_get_drvdata(pdev);
+	int i;
 
 	platform_set_drvdata(pdev, NULL);
 	if (mcbsp) {
@@ -950,12 +970,18 @@ static int __devexit omap_mcbsp_remove(struct platform_device *pdev)
 				mcbsp->pdata->ops->free)
 			mcbsp->pdata->ops->free(mcbsp->id);
 
-		clk_disable(mcbsp->clk);
-		clk_put(mcbsp->clk);
+		for (i = mcbsp->num_clks - 1; i >= 0; i--) {
+			clk_disable(mcbsp->clks[i]);
+			clk_put(mcbsp->clks[i]);
+		}
 
 		iounmap(mcbsp->io_base);
 
-		mcbsp->clk = NULL;
+		if (mcbsp->num_clks) {
+			kfree(mcbsp->clks);
+			mcbsp->clks = NULL;
+			mcbsp->num_clks = 0;
+		}
 		mcbsp->free = 0;
 		mcbsp->dev = NULL;
 	}

arch/arm/plat-orion/gpio.c

@@ -265,51 +265,36 @@ EXPORT_SYMBOL(orion_gpio_set_blink);
  *        polarity    LEVEL          mask
  *
  ****************************************************************************/
-static void gpio_irq_edge_ack(u32 irq)
-{
-	int pin = irq_to_gpio(irq);
-
-	writel(~(1 << (pin & 31)), GPIO_EDGE_CAUSE(pin));
-}
-
-static void gpio_irq_edge_mask(u32 irq)
-{
-	int pin = irq_to_gpio(irq);
-	u32 u;
-
-	u = readl(GPIO_EDGE_MASK(pin));
-	u &= ~(1 << (pin & 31));
-	writel(u, GPIO_EDGE_MASK(pin));
-}
 
-static void gpio_irq_edge_unmask(u32 irq)
+static void gpio_irq_ack(u32 irq)
 {
-	int pin = irq_to_gpio(irq);
-	u32 u;
-
-	u = readl(GPIO_EDGE_MASK(pin));
-	u |= 1 << (pin & 31);
-	writel(u, GPIO_EDGE_MASK(pin));
+	int type = irq_desc[irq].status & IRQ_TYPE_SENSE_MASK;
+	if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) {
+		int pin = irq_to_gpio(irq);
+		writel(~(1 << (pin & 31)), GPIO_EDGE_CAUSE(pin));
+	}
 }
 
-static void gpio_irq_level_mask(u32 irq)
+static void gpio_irq_mask(u32 irq)
 {
 	int pin = irq_to_gpio(irq);
-	u32 u;
-
-	u = readl(GPIO_LEVEL_MASK(pin));
+	int type = irq_desc[irq].status & IRQ_TYPE_SENSE_MASK;
+	u32 reg = (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) ?
+		GPIO_EDGE_MASK(pin) : GPIO_LEVEL_MASK(pin);
+	u32 u = readl(reg);
 	u &= ~(1 << (pin & 31));
-	writel(u, GPIO_LEVEL_MASK(pin));
+	writel(u, reg);
 }
 
-static void gpio_irq_level_unmask(u32 irq)
+static void gpio_irq_unmask(u32 irq)
 {
 	int pin = irq_to_gpio(irq);
-	u32 u;
-
-	u = readl(GPIO_LEVEL_MASK(pin));
+	int type = irq_desc[irq].status & IRQ_TYPE_SENSE_MASK;
+	u32 reg = (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) ?
+		GPIO_EDGE_MASK(pin) : GPIO_LEVEL_MASK(pin);
+	u32 u = readl(reg);
 	u |= 1 << (pin & 31);
-	writel(u, GPIO_LEVEL_MASK(pin));
+	writel(u, reg);
 }
 
 static int gpio_irq_set_type(u32 irq, u32 type)
@@ -331,9 +316,9 @@ static int gpio_irq_set_type(u32 irq, u32 type)
 	 * Set edge/level type.
 	 */
 	if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) {
-		desc->chip = &orion_gpio_irq_edge_chip;
+		desc->handle_irq = handle_edge_irq;
 	} else if (type & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) {
-		desc->chip = &orion_gpio_irq_level_chip;
+		desc->handle_irq = handle_level_irq;
 	} else {
 		printk(KERN_ERR "failed to set irq=%d (type=%d)\n", irq, type);
 		return -EINVAL;
@@ -371,19 +356,11 @@ static int gpio_irq_set_type(u32 irq, u32 type)
 	return 0;
 }
 
-struct irq_chip orion_gpio_irq_edge_chip = {
-	.name		= "orion_gpio_irq_edge",
-	.ack		= gpio_irq_edge_ack,
-	.mask		= gpio_irq_edge_mask,
-	.unmask		= gpio_irq_edge_unmask,
-	.set_type	= gpio_irq_set_type,
-};
-
-struct irq_chip orion_gpio_irq_level_chip = {
-	.name		= "orion_gpio_irq_level",
-	.mask		= gpio_irq_level_mask,
-	.mask_ack	= gpio_irq_level_mask,
-	.unmask		= gpio_irq_level_unmask,
+struct irq_chip orion_gpio_irq_chip = {
+	.name		= "orion_gpio",
+	.ack		= gpio_irq_ack,
+	.mask		= gpio_irq_mask,
+	.unmask		= gpio_irq_unmask,
 	.set_type	= gpio_irq_set_type,
 };
 

arch/arm/plat-orion/include/plat/gpio.h

@@ -31,8 +31,7 @@ void orion_gpio_set_blink(unsigned pin, int blink);
 /*
  * GPIO interrupt handling.
  */
-extern struct irq_chip orion_gpio_irq_edge_chip;
-extern struct irq_chip orion_gpio_irq_level_chip;
+extern struct irq_chip orion_gpio_irq_chip;
 void orion_gpio_irq_handler(int irqoff);
 
 

arch/avr32/mach-at32ap/include/mach/board.h

@@ -116,6 +116,7 @@ struct atmel_nand_data {
 	int	enable_pin;	/* chip enable */
 	int	det_pin;	/* card detect */
 	int	rdy_pin;	/* ready/busy */
+	u8	rdy_pin_active_low;	/* rdy_pin value is inverted */
 	u8	ale;		/* address line number connected to ALE */
 	u8	cle;		/* address line number connected to CLE */
 	u8	bus_width_16;	/* buswidth is 16 bit */

arch/blackfin/Kconfig

@@ -169,26 +169,51 @@ config BF542
 	help
 	  BF542 Processor Support.
 
+config BF542M
+	bool "BF542m"
+	help
+	  BF542 Processor Support.
+
 config BF544
 	bool "BF544"
 	help
 	  BF544 Processor Support.
 
+config BF544M
+	bool "BF544m"
+	help
+	  BF544 Processor Support.
+
 config BF547
 	bool "BF547"
 	help
 	  BF547 Processor Support.
 
+config BF547M
+	bool "BF547m"
+	help
+	  BF547 Processor Support.
+
 config BF548
 	bool "BF548"
 	help
 	  BF548 Processor Support.
 
+config BF548M
+	bool "BF548m"
+	help
+	  BF548 Processor Support.
+
 config BF549
 	bool "BF549"
 	help
 	  BF549 Processor Support.
 
+config BF549M
+	bool "BF549m"
+	help
+	  BF549 Processor Support.
+
 config BF561
 	bool "BF561"
 	help
@@ -224,39 +249,39 @@ config TICK_SOURCE_SYSTMR0
 
 config BF_REV_MIN
 	int
-	default 0 if (BF51x || BF52x || BF54x)
+	default 0 if (BF51x || BF52x || (BF54x && !BF54xM))
 	default 2 if (BF537 || BF536 || BF534)
-	default 3 if (BF561 ||BF533 || BF532 || BF531)
+	default 3 if (BF561 || BF533 || BF532 || BF531 || BF54xM)
 	default 4 if (BF538 || BF539)
 
 config BF_REV_MAX
 	int
-	default 2 if (BF51x || BF52x || BF54x)
-	default 3 if (BF537 || BF536 || BF534)
+	default 2 if (BF51x || BF52x || (BF54x && !BF54xM))
+	default 3 if (BF537 || BF536 || BF534 || BF54xM)
 	default 5 if (BF561 || BF538 || BF539)
 	default 6 if (BF533 || BF532 || BF531)
 
 choice
 	prompt "Silicon Rev"
-	default BF_REV_0_1 if (BF51x || BF52x || BF54x)
+	default BF_REV_0_1 if (BF51x || BF52x || (BF54x && !BF54xM))
 	default BF_REV_0_2 if (BF534 || BF536 || BF537)
-	default BF_REV_0_3 if (BF531 || BF532 || BF533 || BF561)
+	default BF_REV_0_3 if (BF531 || BF532 || BF533 || BF54xM || BF561)
 
 config BF_REV_0_0
 	bool "0.0"
-	depends on (BF51x || BF52x || BF54x)
+	depends on (BF51x || BF52x || (BF54x && !BF54xM))
 
 config BF_REV_0_1
 	bool "0.1"
-	depends on (BF52x || BF54x)
+	depends on (BF52x || (BF54x && !BF54xM))
 
 config BF_REV_0_2
 	bool "0.2"
-	depends on (BF52x || BF537 || BF536 || BF534 || BF54x)
+	depends on (BF52x || BF537 || BF536 || BF534 || (BF54x && !BF54xM))
 
 config BF_REV_0_3
 	bool "0.3"
-	depends on (BF561 || BF537 || BF536 || BF534 || BF533 || BF532 || BF531)
+	depends on (BF54xM || BF561 || BF537 || BF536 || BF534 || BF533 || BF532 || BF531)
 
 config BF_REV_0_4
 	bool "0.4"
@@ -293,9 +318,14 @@ config BF53x
 	depends on (BF531 || BF532 || BF533 || BF534 || BF536 || BF537)
 	default y
 
+config BF54xM
+	bool
+	depends on (BF542M || BF544M || BF547M || BF548M || BF549M)
+	default y
+
 config BF54x
 	bool
-	depends on (BF542 || BF544 || BF547 || BF548 || BF549)
+	depends on (BF542 || BF544 || BF547 || BF548 || BF549 || BF54xM)
 	default y
 
 config MEM_GENERIC_BOARD

arch/blackfin/Makefile

@@ -21,57 +21,67 @@ KALLSYMS         += --symbol-prefix=_
 KBUILD_DEFCONFIG := BF537-STAMP_defconfig
 
 # setup the machine name and the machine dependent settings
-machine-$(CONFIG_BF512) := bf518
-machine-$(CONFIG_BF514) := bf518
-machine-$(CONFIG_BF516) := bf518
-machine-$(CONFIG_BF518) := bf518
-machine-$(CONFIG_BF522) := bf527
-machine-$(CONFIG_BF523) := bf527
-machine-$(CONFIG_BF524) := bf527
-machine-$(CONFIG_BF525) := bf527
-machine-$(CONFIG_BF526) := bf527
-machine-$(CONFIG_BF527) := bf527
-machine-$(CONFIG_BF531) := bf533
-machine-$(CONFIG_BF532) := bf533
-machine-$(CONFIG_BF533) := bf533
-machine-$(CONFIG_BF534) := bf537
-machine-$(CONFIG_BF536) := bf537
-machine-$(CONFIG_BF537) := bf537
-machine-$(CONFIG_BF538) := bf538
-machine-$(CONFIG_BF539) := bf538
-machine-$(CONFIG_BF542) := bf548
-machine-$(CONFIG_BF544) := bf548
-machine-$(CONFIG_BF547) := bf548
-machine-$(CONFIG_BF548) := bf548
-machine-$(CONFIG_BF549) := bf548
-machine-$(CONFIG_BF561) := bf561
+machine-$(CONFIG_BF512)  := bf518
+machine-$(CONFIG_BF514)  := bf518
+machine-$(CONFIG_BF516)  := bf518
+machine-$(CONFIG_BF518)  := bf518
+machine-$(CONFIG_BF522)  := bf527
+machine-$(CONFIG_BF523)  := bf527
+machine-$(CONFIG_BF524)  := bf527
+machine-$(CONFIG_BF525)  := bf527
+machine-$(CONFIG_BF526)  := bf527
+machine-$(CONFIG_BF527)  := bf527
+machine-$(CONFIG_BF531)  := bf533
+machine-$(CONFIG_BF532)  := bf533
+machine-$(CONFIG_BF533)  := bf533
+machine-$(CONFIG_BF534)  := bf537
+machine-$(CONFIG_BF536)  := bf537
+machine-$(CONFIG_BF537)  := bf537
+machine-$(CONFIG_BF538)  := bf538
+machine-$(CONFIG_BF539)  := bf538
+machine-$(CONFIG_BF542)  := bf548
+machine-$(CONFIG_BF542M) := bf548
+machine-$(CONFIG_BF544)  := bf548
+machine-$(CONFIG_BF544M) := bf548
+machine-$(CONFIG_BF547)  := bf548
+machine-$(CONFIG_BF547M) := bf548
+machine-$(CONFIG_BF548)  := bf548
+machine-$(CONFIG_BF548M) := bf548
+machine-$(CONFIG_BF549)  := bf548
+machine-$(CONFIG_BF549M) := bf548
+machine-$(CONFIG_BF561)  := bf561
 MACHINE := $(machine-y)
 export MACHINE
 
-cpu-$(CONFIG_BF512) := bf512
-cpu-$(CONFIG_BF514) := bf514
-cpu-$(CONFIG_BF516) := bf516
-cpu-$(CONFIG_BF518) := bf518
-cpu-$(CONFIG_BF522) := bf522
-cpu-$(CONFIG_BF523) := bf523
-cpu-$(CONFIG_BF524) := bf524
-cpu-$(CONFIG_BF525) := bf525
-cpu-$(CONFIG_BF526) := bf526
-cpu-$(CONFIG_BF527) := bf527
-cpu-$(CONFIG_BF531) := bf531
-cpu-$(CONFIG_BF532) := bf532
-cpu-$(CONFIG_BF533) := bf533
-cpu-$(CONFIG_BF534) := bf534
-cpu-$(CONFIG_BF536) := bf536
-cpu-$(CONFIG_BF537) := bf537
-cpu-$(CONFIG_BF538) := bf538
-cpu-$(CONFIG_BF539) := bf539
-cpu-$(CONFIG_BF542) := bf542
-cpu-$(CONFIG_BF544) := bf544
-cpu-$(CONFIG_BF547) := bf547
-cpu-$(CONFIG_BF548) := bf548
-cpu-$(CONFIG_BF549) := bf549
-cpu-$(CONFIG_BF561) := bf561
+cpu-$(CONFIG_BF512)  := bf512
+cpu-$(CONFIG_BF514)  := bf514
+cpu-$(CONFIG_BF516)  := bf516
+cpu-$(CONFIG_BF518)  := bf518
+cpu-$(CONFIG_BF522)  := bf522
+cpu-$(CONFIG_BF523)  := bf523
+cpu-$(CONFIG_BF524)  := bf524
+cpu-$(CONFIG_BF525)  := bf525
+cpu-$(CONFIG_BF526)  := bf526
+cpu-$(CONFIG_BF527)  := bf527
+cpu-$(CONFIG_BF531)  := bf531
+cpu-$(CONFIG_BF532)  := bf532
+cpu-$(CONFIG_BF533)  := bf533
+cpu-$(CONFIG_BF534)  := bf534
+cpu-$(CONFIG_BF536)  := bf536
+cpu-$(CONFIG_BF537)  := bf537
+cpu-$(CONFIG_BF538)  := bf538
+cpu-$(CONFIG_BF539)  := bf539
+cpu-$(CONFIG_BF542)  := bf542
+cpu-$(CONFIG_BF542M) := bf542m
+cpu-$(CONFIG_BF544)  := bf544
+cpu-$(CONFIG_BF544M) := bf544m
+cpu-$(CONFIG_BF547)  := bf547
+cpu-$(CONFIG_BF547M) := bf547m
+cpu-$(CONFIG_BF548)  := bf548
+cpu-$(CONFIG_BF548M) := bf548m
+cpu-$(CONFIG_BF549)  := bf549
+cpu-$(CONFIG_BF549M) := bf549m
+cpu-$(CONFIG_BF561)  := bf561
 
 rev-$(CONFIG_BF_REV_0_0)  := 0.0
 rev-$(CONFIG_BF_REV_0_1)  := 0.1

arch/blackfin/configs/BF518F-EZBRD_defconfig

@@ -1,6 +1,7 @@
 #
 # Automatically generated make config: don't edit
 # Linux kernel version: 2.6.28-rc2
+# Fri Jan  9 17:58:41 2009
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -149,6 +150,7 @@ CONFIG_BF_REV_0_0=y
 # CONFIG_BF_REV_ANY is not set
 # CONFIG_BF_REV_NONE is not set
 CONFIG_BF51x=y
+CONFIG_MEM_MT48LC32M8A2_75=y
 CONFIG_BFIN518F_EZBRD=y
 
 #
@@ -598,7 +600,10 @@ CONFIG_PHYLIB=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_BFIN_MAC is not set
+CONFIG_BFIN_MAC=y
+CONFIG_BFIN_TX_DESC_NUM=10
+CONFIG_BFIN_RX_DESC_NUM=20
+# CONFIG_BFIN_MAC_RMII is not set
 # CONFIG_SMC91X is not set
 # CONFIG_SMSC911X is not set
 # CONFIG_DM9000 is not set
@@ -679,7 +684,7 @@ CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_BFIN_JTAG_COMM is not set
+CONFIG_BFIN_JTAG_COMM=m
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #

arch/blackfin/configs/BF526-EZBRD_defconfig

@@ -723,7 +723,7 @@ CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_BFIN_JTAG_COMM is not set
+CONFIG_BFIN_JTAG_COMM=m
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #

arch/blackfin/configs/BF527-EZKIT_defconfig

@@ -767,7 +767,7 @@ CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_BFIN_JTAG_COMM is not set
+CONFIG_BFIN_JTAG_COMM=m
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #

arch/blackfin/configs/BF533-EZKIT_defconfig

@@ -672,7 +672,7 @@ CONFIG_BFIN_DMA_INTERFACE=m
 CONFIG_SIMPLE_GPIO=m
 # CONFIG_VT is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_BFIN_JTAG_COMM is not set
+CONFIG_BFIN_JTAG_COMM=m
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #

arch/blackfin/configs/BF533-STAMP_defconfig

@@ -679,7 +679,7 @@ CONFIG_BFIN_DMA_INTERFACE=m
 CONFIG_SIMPLE_GPIO=m
 # CONFIG_VT is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_BFIN_JTAG_COMM is not set
+CONFIG_BFIN_JTAG_COMM=m
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #

arch/blackfin/configs/BF537-STAMP_defconfig

@@ -722,7 +722,7 @@ CONFIG_BFIN_DMA_INTERFACE=m
 CONFIG_SIMPLE_GPIO=m
 # CONFIG_VT is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_BFIN_JTAG_COMM is not set
+CONFIG_BFIN_JTAG_COMM=m
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #

arch/blackfin/configs/BF538-EZKIT_defconfig

@@ -726,7 +726,7 @@ CONFIG_BFIN_DMA_INTERFACE=m
 CONFIG_SIMPLE_GPIO=m
 # CONFIG_VT is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_BFIN_JTAG_COMM is not set
+CONFIG_BFIN_JTAG_COMM=m
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #

arch/blackfin/configs/BF548-EZKIT_defconfig

@@ -856,7 +856,7 @@ CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_BFIN_JTAG_COMM is not set
+CONFIG_BFIN_JTAG_COMM=m
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #

arch/blackfin/configs/BF561-EZKIT_defconfig

@@ -709,7 +709,7 @@ CONFIG_BFIN_DMA_INTERFACE=m
 CONFIG_SIMPLE_GPIO=m
 # CONFIG_VT is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_BFIN_JTAG_COMM is not set
+CONFIG_BFIN_JTAG_COMM=m
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #

arch/blackfin/configs/CM-BF527_defconfig

@@ -1,7 +1,6 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24.7
-# Fri Jul 18 18:00:41 2008
+# Linux kernel version: 2.6.28
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -9,7 +8,6 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
 CONFIG_BLACKFIN=y
 CONFIG_ZONE_DMA=y
-CONFIG_SEMAPHORE_SLEEPERS=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
@@ -32,18 +30,16 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -52,26 +48,35 @@ CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -82,6 +87,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -95,9 +101,11 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
 # CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
+# CONFIG_FREEZER is not set
 
 #
 # Blackfin Processor Options
@@ -106,6 +114,10 @@ CONFIG_PREEMPT_VOLUNTARY=y
 #
 # Processor and Board Settings
 #
+# CONFIG_BF512 is not set
+# CONFIG_BF514 is not set
+# CONFIG_BF516 is not set
+# CONFIG_BF518 is not set
 # CONFIG_BF522 is not set
 # CONFIG_BF523 is not set
 # CONFIG_BF524 is not set
@@ -118,48 +130,32 @@ CONFIG_BF527=y
 # CONFIG_BF534 is not set
 # CONFIG_BF536 is not set
 # CONFIG_BF537 is not set
+# CONFIG_BF538 is not set
+# CONFIG_BF539 is not set
 # CONFIG_BF542 is not set
+# CONFIG_BF542M is not set
 # CONFIG_BF544 is not set
+# CONFIG_BF544M is not set
 # CONFIG_BF547 is not set
+# CONFIG_BF547M is not set
 # CONFIG_BF548 is not set
+# CONFIG_BF548M is not set
 # CONFIG_BF549 is not set
+# CONFIG_BF549M is not set
 # CONFIG_BF561 is not set
+CONFIG_BF_REV_MIN=0
+CONFIG_BF_REV_MAX=2
 # CONFIG_BF_REV_0_0 is not set
 CONFIG_BF_REV_0_1=y
 # CONFIG_BF_REV_0_2 is not set
 # CONFIG_BF_REV_0_3 is not set
 # CONFIG_BF_REV_0_4 is not set
 # CONFIG_BF_REV_0_5 is not set
+# CONFIG_BF_REV_0_6 is not set
 # CONFIG_BF_REV_ANY is not set
 # CONFIG_BF_REV_NONE is not set
 CONFIG_BF52x=y
 CONFIG_MEM_MT48LC16M16A2TG_75=y
-# CONFIG_BFIN527_EZKIT is not set
-CONFIG_BFIN527_BLUETECHNIX_CM=y
-
-#
-# BF527 Specific Configuration
-#
-
-#
-# Alternative Multiplexing Scheme
-#
-# CONFIG_BF527_SPORT0_PORTF is not set
-CONFIG_BF527_SPORT0_PORTG=y
-CONFIG_BF527_SPORT0_TSCLK_PG10=y
-# CONFIG_BF527_SPORT0_TSCLK_PG14 is not set
-CONFIG_BF527_UART1_PORTF=y
-# CONFIG_BF527_UART1_PORTG is not set
-# CONFIG_BF527_NAND_D_PORTF is not set
-CONFIG_BF527_NAND_D_PORTH=y
-
-#
-# Interrupt Priority Assignment
-#
-
-#
-# Priority
-#
 CONFIG_IRQ_PLL_WAKEUP=7
 CONFIG_IRQ_DMA0_ERROR=7
 CONFIG_IRQ_DMAR0_BLK=7
@@ -179,7 +175,6 @@ CONFIG_IRQ_SPORT0_TX=9
 CONFIG_IRQ_SPORT1_RX=9
 CONFIG_IRQ_SPORT1_TX=9
 CONFIG_IRQ_TWI=10
-CONFIG_IRQ_SPI=10
 CONFIG_IRQ_UART0_RX=10
 CONFIG_IRQ_UART0_TX=10
 CONFIG_IRQ_UART1_RX=10
@@ -205,6 +200,34 @@ CONFIG_IRQ_MEM_DMA1=13
 CONFIG_IRQ_WATCH=13
 CONFIG_IRQ_PORTF_INTA=13
 CONFIG_IRQ_PORTF_INTB=13
+# CONFIG_BFIN527_EZKIT is not set
+CONFIG_BFIN527_BLUETECHNIX_CM=y
+# CONFIG_BFIN526_EZBRD is not set
+
+#
+# BF527 Specific Configuration
+#
+
+#
+# Alternative Multiplexing Scheme
+#
+# CONFIG_BF527_SPORT0_PORTF is not set
+CONFIG_BF527_SPORT0_PORTG=y
+CONFIG_BF527_SPORT0_TSCLK_PG10=y
+# CONFIG_BF527_SPORT0_TSCLK_PG14 is not set
+CONFIG_BF527_UART1_PORTF=y
+# CONFIG_BF527_UART1_PORTG is not set
+# CONFIG_BF527_NAND_D_PORTF is not set
+CONFIG_BF527_NAND_D_PORTH=y
+
+#
+# Interrupt Priority Assignment
+#
+
+#
+# Priority
+#
+CONFIG_IRQ_SPI=10
 CONFIG_IRQ_SPI_ERROR=7
 CONFIG_IRQ_NFC_ERROR=7
 CONFIG_IRQ_HDMA_ERROR=7
@@ -226,7 +249,6 @@ CONFIG_BOOT_LOAD=0x1000
 #
 CONFIG_CLKIN_HZ=25000000
 # CONFIG_BFIN_KERNEL_CLOCK is not set
-CONFIG_MAX_MEM_SIZE=512
 CONFIG_MAX_VCO_HZ=600000000
 CONFIG_MIN_VCO_HZ=50000000
 CONFIG_MAX_SCLK_HZ=133333333
@@ -240,10 +262,10 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 # CONFIG_CYCLES_CLOCKSOURCE is not set
-# CONFIG_TICK_ONESHOT is not set
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -277,6 +299,12 @@ CONFIG_ACCESS_OK_L1=y
 CONFIG_CACHELINE_ALIGNED_L1=y
 # CONFIG_SYSCALL_TAB_L1 is not set
 # CONFIG_CPLB_SWITCH_TAB_L1 is not set
+CONFIG_APP_STACK_L1=y
+
+#
+# Speed Optimizations
+#
+CONFIG_BFIN_INS_LOWOVERHEAD=y
 CONFIG_RAMKERNEL=y
 # CONFIG_ROMKERNEL is not set
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -285,10 +313,10 @@ CONFIG_FLATMEM_MANUAL=y
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_VIRT_TO_BUS=y
 CONFIG_BFIN_GPTIMERS=y
@@ -334,7 +362,6 @@ CONFIG_BANK_3=0xFFC0
 #
 # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
 #
-# CONFIG_PCI is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCCARD is not set
 
@@ -345,25 +372,20 @@ CONFIG_BINFMT_ELF_FDPIC=y
 CONFIG_BINFMT_FLAT=y
 CONFIG_BINFMT_ZFLAT=y
 # CONFIG_BINFMT_SHARED_FLAT is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 
 #
 # Power management options
 #
 # CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-# CONFIG_PM_BFIN_SLEEP_DEEPER is not set
-# CONFIG_PM_BFIN_SLEEP is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PM_WAKEUP_BY_GPIO is not set
 
 #
 # CPU Frequency scaling
 #
 # CONFIG_CPU_FREQ is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -376,6 +398,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -405,8 +428,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETLABEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
@@ -415,6 +436,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -431,14 +453,14 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
@@ -456,6 +478,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
@@ -464,6 +488,7 @@ CONFIG_MTD=y
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -507,6 +532,7 @@ CONFIG_MTD_ROM=m
 #
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 # CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_GPIO_ADDR is not set
 # CONFIG_MTD_UCLINUX is not set
 # CONFIG_MTD_PLATRAM is not set
 
@@ -542,10 +568,12 @@ CONFIG_BLK_DEV=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -558,7 +586,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -579,6 +606,7 @@ CONFIG_PHYLIB=y
 # CONFIG_SMSC_PHY is not set
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -591,11 +619,14 @@ CONFIG_BFIN_MAC_RMII=y
 # CONFIG_SMC91X is not set
 # CONFIG_SMSC911X is not set
 # CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 
@@ -604,6 +635,7 @@ CONFIG_BFIN_MAC_RMII=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # USB Network Adapters
@@ -616,7 +648,6 @@ CONFIG_BFIN_MAC_RMII=y
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -642,14 +673,15 @@ CONFIG_BFIN_MAC_RMII=y
 # CONFIG_BF5xx_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
 # CONFIG_BF5xx_PPI is not set
-CONFIG_BFIN_OTP=y
-# CONFIG_BFIN_OTP_WRITE_ENABLE is not set
+# CONFIG_BF5xx_EPPI is not set
 # CONFIG_BFIN_SPORT is not set
 # CONFIG_BFIN_TIMER_LATENCY is not set
 # CONFIG_TWI_LCD is not set
+CONFIG_BFIN_DMA_INTERFACE=m
 CONFIG_SIMPLE_GPIO=m
 # CONFIG_VT is not set
 # CONFIG_DEVKMEM is not set
+# CONFIG_BFIN_JTAG_COMM is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -673,6 +705,8 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_BFIN_SPORT is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
+CONFIG_BFIN_OTP=y
+# CONFIG_BFIN_OTP_WRITE_ENABLE is not set
 
 #
 # CAN, the car bus and industrial fieldbus
@@ -680,44 +714,49 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_CAN4LINUX is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_HELPER_AUTO=y
 
 #
-# I2C Algorithms
+# I2C Hardware Bus support
 #
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
 
 #
-# I2C Hardware Bus support
+# I2C system bus drivers (mostly embedded / system-on-chip)
 #
 CONFIG_I2C_BLACKFIN_TWI=m
 CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
 # CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
 # CONFIG_I2C_TINY_USB is not set
 
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_AD5252 is not set
-# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCF8575 is not set
+# CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
@@ -726,37 +765,41 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
 CONFIG_SPI_MASTER=y
 
 #
 # SPI Master Controller Drivers
 #
 CONFIG_SPI_BFIN=y
+# CONFIG_SPI_BFIN_LOCK is not set
 # CONFIG_SPI_BITBANG is not set
 
 #
 # SPI Protocol Masters
 #
-# CONFIG_EEPROM_AT25 is not set
+# CONFIG_SPI_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
 # CONFIG_SENSORS_ADM1026 is not set
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_F71805F is not set
@@ -777,6 +820,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1111 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
@@ -785,6 +829,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83781D is not set
@@ -792,9 +837,12 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83793 is not set
 # CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -809,22 +857,32 @@ CONFIG_BFIN_WDT=y
 #
 # CONFIG_USBPCWATCHDOG is not set
 
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -839,10 +897,6 @@ CONFIG_SSB_POSSIBLE=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -850,6 +904,7 @@ CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
@@ -860,40 +915,48 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 CONFIG_USB_OTG_BLACKLIST_HUB=y
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
 CONFIG_USB_MUSB_HDRC=y
 CONFIG_USB_MUSB_SOC=y
 
 #
-# Blackfin high speed USB support
+# Blackfin high speed USB Support
 #
 CONFIG_USB_MUSB_HOST=y
 # CONFIG_USB_MUSB_PERIPHERAL is not set
 # CONFIG_USB_MUSB_OTG is not set
 CONFIG_USB_MUSB_HDRC_HCD=y
 CONFIG_MUSB_PIO_ONLY=y
-CONFIG_USB_MUSB_LOGLEVEL=0
+CONFIG_MUSB_DMA_POLL=y
+# CONFIG_USB_MUSB_DEBUG is not set
 
 #
 # USB Device Class drivers
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -901,15 +964,10 @@ CONFIG_USB_MUSB_LOGLEVEL=0
 # USB Imaging devices
 #
 # CONFIG_USB_MDC800 is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
 #
-
-#
-# USB Serial Converter support
-#
 # CONFIG_USB_SERIAL is not set
 
 #
@@ -918,7 +976,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -934,17 +992,13 @@ CONFIG_USB_MON=y
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -973,51 +1027,59 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
 #
-# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
 
 #
 # Platform RTC drivers
 #
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_BFIN=y
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
 #
 # CONFIG_EXT2_FS is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -1059,8 +1121,11 @@ CONFIG_SYSFS=y
 # CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -1068,13 +1133,12 @@ CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=m
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -1130,7 +1194,6 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
-# CONFIG_INSTRUMENTATION is not set
 
 #
 # Kernel hacking
@@ -1138,14 +1201,61 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_FRAME_POINTER is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+
+#
+# Tracers
+#
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_KGDB_TESTCASE is not set
+CONFIG_DEBUG_VERBOSE=y
 CONFIG_DEBUG_MMRS=y
+# CONFIG_DEBUG_HWERR is not set
+# CONFIG_DEBUG_DOUBLEFAULT is not set
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
 CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
@@ -1154,7 +1264,7 @@ CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
 CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
 # CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
 # CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
-CONFIG_EARLY_PRINTK=y
+# CONFIG_EARLY_PRINTK is not set
 # CONFIG_CPLB_INFO is not set
 CONFIG_ACCESS_CHECK=y
 
@@ -1163,10 +1273,96 @@ CONFIG_ACCESS_CHECK=y
 #
 # CONFIG_KEYS is not set
 CONFIG_SECURITY=y
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_NETWORK is not set
-# CONFIG_SECURITY_CAPABILITIES is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_SECURITY_ROOTPLUG is not set
-# CONFIG_CRYPTO is not set
+CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
 
 #
 # Library routines
@@ -1174,6 +1370,7 @@ CONFIG_SECURITY=y
 CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set

arch/blackfin/include/asm/checksum.h

@@ -63,23 +63,23 @@ static inline __wsum
 csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
 		   unsigned short proto, __wsum sum)
 {
-
-	__asm__ ("%0 = %0 + %1;\n\t"
-		 "CC = AC0;\n\t"
-		 "if !CC jump 4;\n\t"
-		 "%0 = %0 + %4;\n\t"
-		 "%0 = %0 + %2;\n\t"
-		 "CC = AC0;\n\t"
-                 "if !CC jump 4;\n\t"
-                 "%0 = %0 + %4;\n\t"
- 		 "%0 = %0 + %3;\n\t"
-		 "CC = AC0;\n\t"
-                 "if !CC jump 4;\n\t"
-                 "%0 = %0 + %4;\n\t"
-                 "NOP;\n\t"
- 		 : "=d" (sum)
-		 : "d" (daddr), "d" (saddr), "d" ((ntohs(len)<<16)+proto*256), "d" (1), "0"(sum)
-		 : "CC");
+	unsigned int carry;
+
+	__asm__ ("%0 = %0 + %2;\n\t"
+		"CC = AC0;\n\t"
+		"%1 = CC;\n\t"
+		"%0 = %0 + %1;\n\t"
+		"%0 = %0 + %3;\n\t"
+		"CC = AC0;\n\t"
+		"%1 = CC;\n\t"
+		"%0 = %0 + %1;\n\t"
+		"%0 = %0 + %4;\n\t"
+		"CC = AC0;\n\t"
+		"%1 = CC;\n\t"
+		"%0 = %0 + %1;\n\t"
+		: "=d" (sum), "=&d" (carry)
+		: "d" (daddr), "d" (saddr), "d" ((len + proto) << 8), "0"(sum)
+		: "CC");
 
 	return (sum);
 }

arch/blackfin/include/asm/delay.h

@@ -13,29 +13,7 @@
 
 static inline void __delay(unsigned long loops)
 {
-	if (ANOMALY_05000312) {
-		/* Interrupted loads to loop registers -> bad */
-		unsigned long tmp;
-		__asm__ __volatile__(
-			"[--SP] = LC0;"
-			"[--SP] = LT0;"
-			"[--SP] = LB0;"
-			"LSETUP (1f,1f) LC0 = %1;"
-			"1: NOP;"
-			/* We take advantage of the fact that LC0 is 0 at
-			 * the end of the loop.  Otherwise we'd need some
-			 * NOPs after the CLI here.
-			 */
-			"CLI %0;"
-			"LB0 = [SP++];"
-			"LT0 = [SP++];"
-			"LC0 = [SP++];"
-			"STI %0;"
-			: "=d" (tmp)
-			: "a" (loops)
-		);
-	} else
-		__asm__ __volatile__ (
+__asm__ __volatile__ (
 			"LSETUP(1f, 1f) LC0 = %0;"
 			"1: NOP;"
 			:
@@ -47,16 +25,15 @@ static inline void __delay(unsigned long loops)
 #include <linux/param.h>	/* needed for HZ */
 
 /*
- * Use only for very small delays ( < 1 msec).  Should probably use a
- * lookup table, really, as the multiplications take much too long with
- * short delays.  This is a "reasonable" implementation, though (and the
- * first constant multiplications gets optimized away if the delay is
- * a constant)
+ * close approximation borrowed from m68knommu to avoid 64-bit math
  */
+
+#define	HZSCALE		(268435456 / (1000000/HZ))
+
 static inline void udelay(unsigned long usecs)
 {
 	extern unsigned long loops_per_jiffy;
-	__delay(usecs * loops_per_jiffy / (1000000 / HZ));
+	__delay((((usecs * HZSCALE) >> 11) * (loops_per_jiffy >> 11)) >> 6);
 }
 
 #endif

arch/blackfin/include/asm/gpio.h

@@ -27,60 +27,6 @@
  * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
-/*
-*  Number     BF537/6/4    BF561    BF533/2/1
-*             BF527/5/2
-*
-*  GPIO_0       PF0         PF0        PF0
-*  GPIO_1       PF1         PF1        PF1
-*  GPIO_2       PF2         PF2        PF2
-*  GPIO_3       PF3         PF3        PF3
-*  GPIO_4       PF4         PF4        PF4
-*  GPIO_5       PF5         PF5        PF5
-*  GPIO_6       PF6         PF6        PF6
-*  GPIO_7       PF7         PF7        PF7
-*  GPIO_8       PF8         PF8        PF8
-*  GPIO_9       PF9         PF9        PF9
-*  GPIO_10      PF10        PF10       PF10
-*  GPIO_11      PF11        PF11       PF11
-*  GPIO_12      PF12        PF12       PF12
-*  GPIO_13      PF13        PF13       PF13
-*  GPIO_14      PF14        PF14       PF14
-*  GPIO_15      PF15        PF15       PF15
-*  GPIO_16      PG0         PF16
-*  GPIO_17      PG1         PF17
-*  GPIO_18      PG2         PF18
-*  GPIO_19      PG3         PF19
-*  GPIO_20      PG4         PF20
-*  GPIO_21      PG5         PF21
-*  GPIO_22      PG6         PF22
-*  GPIO_23      PG7         PF23
-*  GPIO_24      PG8         PF24
-*  GPIO_25      PG9         PF25
-*  GPIO_26      PG10        PF26
-*  GPIO_27      PG11        PF27
-*  GPIO_28      PG12        PF28
-*  GPIO_29      PG13        PF29
-*  GPIO_30      PG14        PF30
-*  GPIO_31      PG15        PF31
-*  GPIO_32      PH0         PF32
-*  GPIO_33      PH1         PF33
-*  GPIO_34      PH2         PF34
-*  GPIO_35      PH3         PF35
-*  GPIO_36      PH4         PF36
-*  GPIO_37      PH5         PF37
-*  GPIO_38      PH6         PF38
-*  GPIO_39      PH7         PF39
-*  GPIO_40      PH8         PF40
-*  GPIO_41      PH9         PF41
-*  GPIO_42      PH10        PF42
-*  GPIO_43      PH11        PF43
-*  GPIO_44      PH12        PF44
-*  GPIO_45      PH13        PF45
-*  GPIO_46      PH14        PF46
-*  GPIO_47      PH15        PF47
-*/
-
 #ifndef __ARCH_BLACKFIN_GPIO_H__
 #define __ARCH_BLACKFIN_GPIO_H__
 
@@ -295,10 +241,6 @@ int bfin_gpio_direction_output(unsigned gpio, int value);
 int bfin_gpio_get_value(unsigned gpio);
 void bfin_gpio_set_value(unsigned gpio, int value);
 
-#ifndef BF548_FAMILY
-#define bfin_gpio_set_value(gpio, value)    set_gpio_data(gpio, value)
-#endif
-
 #ifdef CONFIG_GPIOLIB
 #include <asm-generic/gpio.h>		/* cansleep wrappers */
 

arch/blackfin/include/asm/kgdb.h

@@ -1,32 +1,8 @@
-/*
- * File:         include/asm-blackfin/kgdb.h
- * Based on:
- * Author:       Sonic Zhang
- *
- * Created:
- * Description:
- *
- * Rev:          $Id: kgdb_bfin_linux-2.6.x.patch 4934 2007-02-13 09:32:11Z sonicz $
- *
- * Modified:
- *               Copyright 2005-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+/* Blackfin KGDB header
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * Copyright 2005-2009 Analog Devices Inc.
  *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef __ASM_BLACKFIN_KGDB_H__
@@ -37,17 +13,18 @@
 /* gdb locks */
 #define KGDB_MAX_NO_CPUS 8
 
-/************************************************************************/
-/* BUFMAX defines the maximum number of characters in inbound/outbound buffers*/
-/* at least NUMREGBYTES*2 are needed for register packets */
-/* Longer buffer is needed to list all threads */
+/*
+ * BUFMAX defines the maximum number of characters in inbound/outbound buffers.
+ * At least NUMREGBYTES*2 are needed for register packets.
+ * Longer buffer is needed to list all threads.
+ */
 #define BUFMAX 2048
 
 /*
- *  Note that this register image is different from
- *  the register image that Linux produces at interrupt time.
- *  
- *  Linux's register image is defined by struct pt_regs in ptrace.h.
+ * Note that this register image is different from
+ * the register image that Linux produces at interrupt time.
+ *
+ * Linux's register image is defined by struct pt_regs in ptrace.h.
  */
 enum regnames {
   /* Core Registers */
@@ -104,14 +81,14 @@ enum regnames {
   BFIN_RETX,
   BFIN_RETN,
   BFIN_RETE,
-  
+
   /* Pseudo Registers */
   BFIN_PC,
   BFIN_CC,
   BFIN_EXTRA1,		/* Address of .text section.  */
   BFIN_EXTRA2,		/* Address of .data section.  */
   BFIN_EXTRA3,		/* Address of .bss section.  */
-  BFIN_FDPIC_EXEC, 
+  BFIN_FDPIC_EXEC,
   BFIN_FDPIC_INTERP,
 
   /* MMRs */
@@ -126,7 +103,7 @@ enum regnames {
 
 static inline void arch_kgdb_breakpoint(void)
 {
-	asm("   EXCPT 2;");
+	asm("EXCPT 2;");
 }
 #define BREAK_INSTR_SIZE	2
 #define CACHE_FLUSH_IS_SAFE	1

arch/blackfin/include/asm/mem_init.h

@@ -115,7 +115,7 @@
 #define mem_SDRRC       (((CONFIG_SCLK_HZ / 1000) * SDRAM_Tref) / SDRAM_NRA) - (SDRAM_tRAS_num + SDRAM_tRP_num)
 
 /* Enable SCLK Out */
-#define mem_SDGCTL        (0x80000000 | SCTLE | SDRAM_CL | SDRAM_tRAS | SDRAM_tRP | SDRAM_tRCD | SDRAM_tWR | PSS)
+#define mem_SDGCTL        (SCTLE | SDRAM_CL | SDRAM_tRAS | SDRAM_tRP | SDRAM_tRCD | SDRAM_tWR | PSS)
 #else
 #define mem_SDRRC 	CONFIG_MEM_SDRRC
 #define mem_SDGCTL	CONFIG_MEM_SDGCTL

arch/blackfin/include/asm/pda.h

@@ -59,6 +59,7 @@ struct blackfin_pda {			/* Per-processor Data Area */
 	unsigned long icplb_fault_addr;
 	unsigned long retx;
 	unsigned long seqstat;
+	unsigned int __nmi_count;	/* number of times NMI asserted on this CPU */
 };
 
 extern struct blackfin_pda cpu_pda[];

arch/blackfin/include/asm/reboot.h

@@ -15,6 +15,6 @@ extern void native_machine_halt(void);
 extern void native_machine_power_off(void);
 
 /* common reboot workarounds */
-extern void bfin_gpio_reset_spi0_ssel1(void);
+extern void bfin_reset_boot_spi_cs(unsigned short pin);
 
 #endif

arch/blackfin/kernel/Makefile

@@ -15,6 +15,8 @@ else
     obj-y += time.o
 endif
 
+CFLAGS_kgdb_test.o := -mlong-calls -O0
+
 obj-$(CONFIG_IPIPE)                  += ipipe.o
 obj-$(CONFIG_IPIPE_TRACE_MCOUNT)     += mcount.o
 obj-$(CONFIG_BFIN_GPTIMERS)          += gptimers.o

arch/blackfin/kernel/bfin_dma_5xx.c

@@ -249,6 +249,13 @@ static void __dma_memcpy(u32 daddr, s16 dmod, u32 saddr, s16 smod, size_t cnt, u
 
 	spin_lock_irqsave(&mdma_lock, flags);
 
+	/* Force a sync in case a previous config reset on this channel
+	 * occurred.  This is needed so subsequent writes to DMA registers
+	 * are not spuriously lost/corrupted.  Do it under irq lock and
+	 * without the anomaly version (because we are atomic already).
+	 */
+	__builtin_bfin_ssync();
+
 	if (bfin_read_MDMA_S0_CONFIG())
 		while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE))
 			continue;

arch/blackfin/kernel/bfin_gpio.c

@@ -27,59 +27,6 @@
  * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
-/*
-*  Number     BF537/6/4    BF561    BF533/2/1	   BF549/8/4/2
-*
-*  GPIO_0       PF0         PF0        PF0	   PA0...PJ13
-*  GPIO_1       PF1         PF1        PF1
-*  GPIO_2       PF2         PF2        PF2
-*  GPIO_3       PF3         PF3        PF3
-*  GPIO_4       PF4         PF4        PF4
-*  GPIO_5       PF5         PF5        PF5
-*  GPIO_6       PF6         PF6        PF6
-*  GPIO_7       PF7         PF7        PF7
-*  GPIO_8       PF8         PF8        PF8
-*  GPIO_9       PF9         PF9        PF9
-*  GPIO_10      PF10        PF10       PF10
-*  GPIO_11      PF11        PF11       PF11
-*  GPIO_12      PF12        PF12       PF12
-*  GPIO_13      PF13        PF13       PF13
-*  GPIO_14      PF14        PF14       PF14
-*  GPIO_15      PF15        PF15       PF15
-*  GPIO_16      PG0         PF16
-*  GPIO_17      PG1         PF17
-*  GPIO_18      PG2         PF18
-*  GPIO_19      PG3         PF19
-*  GPIO_20      PG4         PF20
-*  GPIO_21      PG5         PF21
-*  GPIO_22      PG6         PF22
-*  GPIO_23      PG7         PF23
-*  GPIO_24      PG8         PF24
-*  GPIO_25      PG9         PF25
-*  GPIO_26      PG10        PF26
-*  GPIO_27      PG11        PF27
-*  GPIO_28      PG12        PF28
-*  GPIO_29      PG13        PF29
-*  GPIO_30      PG14        PF30
-*  GPIO_31      PG15        PF31
-*  GPIO_32      PH0         PF32
-*  GPIO_33      PH1         PF33
-*  GPIO_34      PH2         PF34
-*  GPIO_35      PH3         PF35
-*  GPIO_36      PH4         PF36
-*  GPIO_37      PH5         PF37
-*  GPIO_38      PH6         PF38
-*  GPIO_39      PH7         PF39
-*  GPIO_40      PH8         PF40
-*  GPIO_41      PH9         PF41
-*  GPIO_42      PH10        PF42
-*  GPIO_43      PH11        PF43
-*  GPIO_44      PH12        PF44
-*  GPIO_45      PH13        PF45
-*  GPIO_46      PH14        PF46
-*  GPIO_47      PH15        PF47
-*/
-
 #include <linux/delay.h>
 #include <linux/module.h>
 #include <linux/err.h>
@@ -119,62 +66,61 @@ enum {
 #define AWA_DUMMY_READ(...)  do { } while (0)
 #endif
 
+static struct gpio_port_t * const gpio_array[] = {
 #if defined(BF533_FAMILY) || defined(BF538_FAMILY)
-static struct gpio_port_t *gpio_bankb[] = {
 	(struct gpio_port_t *) FIO_FLAG_D,
-};
-#endif
-
-#if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY)
-static struct gpio_port_t *gpio_bankb[] = {
+#elif defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY)
 	(struct gpio_port_t *) PORTFIO,
 	(struct gpio_port_t *) PORTGIO,
 	(struct gpio_port_t *) PORTHIO,
+#elif defined(BF561_FAMILY)
+	(struct gpio_port_t *) FIO0_FLAG_D,
+	(struct gpio_port_t *) FIO1_FLAG_D,
+	(struct gpio_port_t *) FIO2_FLAG_D,
+#elif defined(BF548_FAMILY)
+	(struct gpio_port_t *)PORTA_FER,
+	(struct gpio_port_t *)PORTB_FER,
+	(struct gpio_port_t *)PORTC_FER,
+	(struct gpio_port_t *)PORTD_FER,
+	(struct gpio_port_t *)PORTE_FER,
+	(struct gpio_port_t *)PORTF_FER,
+	(struct gpio_port_t *)PORTG_FER,
+	(struct gpio_port_t *)PORTH_FER,
+	(struct gpio_port_t *)PORTI_FER,
+	(struct gpio_port_t *)PORTJ_FER,
+#else
+# error no gpio arrays defined
+#endif
 };
 
-static unsigned short *port_fer[] = {
+#if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY)
+static unsigned short * const port_fer[] = {
 	(unsigned short *) PORTF_FER,
 	(unsigned short *) PORTG_FER,
 	(unsigned short *) PORTH_FER,
 };
-#endif
 
-#if defined(BF527_FAMILY) || defined(BF518_FAMILY)
-static unsigned short *port_mux[] = {
+# if !defined(BF537_FAMILY)
+static unsigned short * const port_mux[] = {
 	(unsigned short *) PORTF_MUX,
 	(unsigned short *) PORTG_MUX,
 	(unsigned short *) PORTH_MUX,
 };
 
 static const
-u8 pmux_offset[][16] =
-	{{ 0, 0, 0, 0, 0, 0, 0, 0, 2, 2, 4, 6, 8, 8, 10, 10 }, /* PORTF */
-	 { 0, 0, 0, 0, 0, 2, 2, 4, 4, 6, 8, 10, 10, 10, 12, 12 }, /* PORTG */
-	 { 0, 0, 0, 0, 0, 0, 0, 0, 2, 4, 4, 4, 4, 4, 4, 4 }, /* PORTH */
-	};
-#endif
-
-#ifdef BF561_FAMILY
-static struct gpio_port_t *gpio_bankb[] = {
-	(struct gpio_port_t *) FIO0_FLAG_D,
-	(struct gpio_port_t *) FIO1_FLAG_D,
-	(struct gpio_port_t *) FIO2_FLAG_D,
+u8 pmux_offset[][16] = {
+#  if defined(BF527_FAMILY)
+	{ 0, 0, 0, 0, 0, 0, 0, 0, 2, 2, 4, 6, 8, 8, 10, 10 }, /* PORTF */
+	{ 0, 0, 0, 0, 0, 2, 2, 4, 4, 6, 8, 10, 10, 10, 12, 12 }, /* PORTG */
+	{ 0, 0, 0, 0, 0, 0, 0, 0, 2, 4, 4, 4, 4, 4, 4, 4 }, /* PORTH */
+#  elif defined(BF518_FAMILY)
+	{ 0, 2, 2, 2, 2, 2, 2, 4, 6, 6, 6, 8, 8, 8, 8, 10 }, /* PORTF */
+	{ 0, 0, 0, 2, 4, 6, 6, 6, 8, 10, 10, 12, 14, 14, 14, 14 }, /* PORTG */
+	{ 0, 0, 0, 0, 2, 2, 4, 6, 10, 10, 10, 10, 10, 10, 10, 10 }, /* PORTH */
+#  endif
 };
-#endif
+# endif
 
-#ifdef BF548_FAMILY
-static struct gpio_port_t *gpio_array[] = {
-	(struct gpio_port_t *)PORTA_FER,
-	(struct gpio_port_t *)PORTB_FER,
-	(struct gpio_port_t *)PORTC_FER,
-	(struct gpio_port_t *)PORTD_FER,
-	(struct gpio_port_t *)PORTE_FER,
-	(struct gpio_port_t *)PORTF_FER,
-	(struct gpio_port_t *)PORTG_FER,
-	(struct gpio_port_t *)PORTH_FER,
-	(struct gpio_port_t *)PORTI_FER,
-	(struct gpio_port_t *)PORTJ_FER,
-};
 #endif
 
 static unsigned short reserved_gpio_map[GPIO_BANK_NUM];
@@ -188,35 +134,9 @@ static struct str_ident {
 } str_ident[MAX_RESOURCES];
 
 #if defined(CONFIG_PM)
-#if defined(CONFIG_BF54x)
-static struct gpio_port_s gpio_bank_saved[GPIO_BANK_NUM];
-#else
-static unsigned short wakeup_map[GPIO_BANK_NUM];
-static unsigned char wakeup_flags_map[MAX_BLACKFIN_GPIOS];
 static struct gpio_port_s gpio_bank_saved[GPIO_BANK_NUM];
-
-#ifdef BF533_FAMILY
-static unsigned int sic_iwr_irqs[] = {IRQ_PROG_INTB};
-#endif
-
-#ifdef BF537_FAMILY
-static unsigned int sic_iwr_irqs[] = {IRQ_PROG_INTB, IRQ_PORTG_INTB, IRQ_MAC_TX};
-#endif
-
-#ifdef BF538_FAMILY
-static unsigned int sic_iwr_irqs[] = {IRQ_PORTF_INTB};
 #endif
 
-#if defined(BF527_FAMILY) || defined(BF518_FAMILY)
-static unsigned int sic_iwr_irqs[] = {IRQ_PORTF_INTB, IRQ_PORTG_INTB, IRQ_PORTH_INTB};
-#endif
-
-#ifdef BF561_FAMILY
-static unsigned int sic_iwr_irqs[] = {IRQ_PROG0_INTB, IRQ_PROG1_INTB, IRQ_PROG2_INTB};
-#endif
-#endif
-#endif /* CONFIG_PM */
-
 inline int check_gpio(unsigned gpio)
 {
 #if defined(BF548_FAMILY)
@@ -330,9 +250,10 @@ static struct {
 	{.res = P_SPI0_SSEL3, .offset = 0},
 };
 
-static void portmux_setup(unsigned short per, unsigned short function)
+static void portmux_setup(unsigned short per)
 {
 	u16 y, offset, muxreg;
+	u16 function = P_FUNCT2MUX(per);
 
 	for (y = 0; y < ARRAY_SIZE(port_mux_lut); y++) {
 		if (port_mux_lut[y].res == per) {
@@ -353,30 +274,33 @@ static void portmux_setup(unsigned short per, unsigned short function)
 	}
 }
 #elif defined(BF548_FAMILY)
-inline void portmux_setup(unsigned short portno, unsigned short function)
+inline void portmux_setup(unsigned short per)
 {
 	u32 pmux;
+	u16 ident = P_IDENT(per);
+	u16 function = P_FUNCT2MUX(per);
 
-	pmux = gpio_array[gpio_bank(portno)]->port_mux;
+	pmux = gpio_array[gpio_bank(ident)]->port_mux;
 
-	pmux &= ~(0x3 << (2 * gpio_sub_n(portno)));
-	pmux |= (function & 0x3) << (2 * gpio_sub_n(portno));
+	pmux &= ~(0x3 << (2 * gpio_sub_n(ident)));
+	pmux |= (function & 0x3) << (2 * gpio_sub_n(ident));
 
-	gpio_array[gpio_bank(portno)]->port_mux = pmux;
+	gpio_array[gpio_bank(ident)]->port_mux = pmux;
 }
 
-inline u16 get_portmux(unsigned short portno)
+inline u16 get_portmux(unsigned short per)
 {
 	u32 pmux;
+	u16 ident = P_IDENT(per);
 
-	pmux = gpio_array[gpio_bank(portno)]->port_mux;
+	pmux = gpio_array[gpio_bank(ident)]->port_mux;
 
-	return (pmux >> (2 * gpio_sub_n(portno)) & 0x3);
+	return (pmux >> (2 * gpio_sub_n(ident)) & 0x3);
 }
 #elif defined(BF527_FAMILY) || defined(BF518_FAMILY)
-inline void portmux_setup(unsigned short portno, unsigned short function)
+inline void portmux_setup(unsigned short per)
 {
-	u16 pmux, ident = P_IDENT(portno);
+	u16 pmux, ident = P_IDENT(per), function = P_FUNCT2MUX(per);
 	u8 offset = pmux_offset[gpio_bank(ident)][gpio_sub_n(ident)];
 
 	pmux = *port_mux[gpio_bank(ident)];
@@ -424,90 +348,71 @@ void set_gpio_ ## name(unsigned gpio, unsigned short arg) \
 	unsigned long flags; \
 	local_irq_save_hw(flags); \
 	if (arg) \
-		gpio_bankb[gpio_bank(gpio)]->name |= gpio_bit(gpio); \
+		gpio_array[gpio_bank(gpio)]->name |= gpio_bit(gpio); \
 	else \
-		gpio_bankb[gpio_bank(gpio)]->name &= ~gpio_bit(gpio); \
+		gpio_array[gpio_bank(gpio)]->name &= ~gpio_bit(gpio); \
 	AWA_DUMMY_READ(name); \
 	local_irq_restore_hw(flags); \
 } \
 EXPORT_SYMBOL(set_gpio_ ## name);
 
-SET_GPIO(dir)
-SET_GPIO(inen)
-SET_GPIO(polar)
-SET_GPIO(edge)
-SET_GPIO(both)
+SET_GPIO(dir)   /* set_gpio_dir() */
+SET_GPIO(inen)  /* set_gpio_inen() */
+SET_GPIO(polar) /* set_gpio_polar() */
+SET_GPIO(edge)  /* set_gpio_edge() */
+SET_GPIO(both)  /* set_gpio_both() */
 
 
-#if ANOMALY_05000311 || ANOMALY_05000323
 #define SET_GPIO_SC(name) \
 void set_gpio_ ## name(unsigned gpio, unsigned short arg) \
 { \
 	unsigned long flags; \
-	local_irq_save_hw(flags); \
-	if (arg) \
-		gpio_bankb[gpio_bank(gpio)]->name ## _set = gpio_bit(gpio); \
-	else \
-		gpio_bankb[gpio_bank(gpio)]->name ## _clear = gpio_bit(gpio); \
-	AWA_DUMMY_READ(name); \
-	local_irq_restore_hw(flags); \
-} \
-EXPORT_SYMBOL(set_gpio_ ## name);
-#else
-#define SET_GPIO_SC(name) \
-void set_gpio_ ## name(unsigned gpio, unsigned short arg) \
-{ \
+	if (ANOMALY_05000311 || ANOMALY_05000323) \
+		local_irq_save_hw(flags); \
 	if (arg) \
-		gpio_bankb[gpio_bank(gpio)]->name ## _set = gpio_bit(gpio); \
+		gpio_array[gpio_bank(gpio)]->name ## _set = gpio_bit(gpio); \
 	else \
-		gpio_bankb[gpio_bank(gpio)]->name ## _clear = gpio_bit(gpio); \
+		gpio_array[gpio_bank(gpio)]->name ## _clear = gpio_bit(gpio); \
+	if (ANOMALY_05000311 || ANOMALY_05000323) { \
+		AWA_DUMMY_READ(name); \
+		local_irq_restore_hw(flags); \
+	} \
 } \
 EXPORT_SYMBOL(set_gpio_ ## name);
-#endif
 
 SET_GPIO_SC(maska)
 SET_GPIO_SC(maskb)
 SET_GPIO_SC(data)
 
-#if ANOMALY_05000311 || ANOMALY_05000323
 void set_gpio_toggle(unsigned gpio)
 {
 	unsigned long flags;
-	local_irq_save_hw(flags);
-	gpio_bankb[gpio_bank(gpio)]->toggle = gpio_bit(gpio);
-	AWA_DUMMY_READ(toggle);
-	local_irq_restore_hw(flags);
-}
-#else
-void set_gpio_toggle(unsigned gpio)
-{
-	gpio_bankb[gpio_bank(gpio)]->toggle = gpio_bit(gpio);
+	if (ANOMALY_05000311 || ANOMALY_05000323)
+		local_irq_save_hw(flags);
+	gpio_array[gpio_bank(gpio)]->toggle = gpio_bit(gpio);
+	if (ANOMALY_05000311 || ANOMALY_05000323) {
+		AWA_DUMMY_READ(toggle);
+		local_irq_restore_hw(flags);
+	}
 }
-#endif
 EXPORT_SYMBOL(set_gpio_toggle);
 
 
 /*Set current PORT date (16-bit word)*/
 
-#if ANOMALY_05000311 || ANOMALY_05000323
 #define SET_GPIO_P(name) \
 void set_gpiop_ ## name(unsigned gpio, unsigned short arg) \
 { \
 	unsigned long flags; \
-	local_irq_save_hw(flags); \
-	gpio_bankb[gpio_bank(gpio)]->name = arg; \
-	AWA_DUMMY_READ(name); \
-	local_irq_restore_hw(flags); \
+	if (ANOMALY_05000311 || ANOMALY_05000323) \
+		local_irq_save_hw(flags); \
+	gpio_array[gpio_bank(gpio)]->name = arg; \
+	if (ANOMALY_05000311 || ANOMALY_05000323) { \
+		AWA_DUMMY_READ(name); \
+		local_irq_restore_hw(flags); \
+	} \
 } \
 EXPORT_SYMBOL(set_gpiop_ ## name);
-#else
-#define SET_GPIO_P(name) \
-void set_gpiop_ ## name(unsigned gpio, unsigned short arg) \
-{ \
-	gpio_bankb[gpio_bank(gpio)]->name = arg; \
-} \
-EXPORT_SYMBOL(set_gpiop_ ## name);
-#endif
 
 SET_GPIO_P(data)
 SET_GPIO_P(dir)
@@ -519,27 +424,21 @@ SET_GPIO_P(maska)
 SET_GPIO_P(maskb)
 
 /* Get a specific bit */
-#if ANOMALY_05000311 || ANOMALY_05000323
 #define GET_GPIO(name) \
 unsigned short get_gpio_ ## name(unsigned gpio) \
 { \
 	unsigned long flags; \
 	unsigned short ret; \
-	local_irq_save_hw(flags); \
-	ret = 0x01 & (gpio_bankb[gpio_bank(gpio)]->name >> gpio_sub_n(gpio)); \
-	AWA_DUMMY_READ(name); \
-	local_irq_restore_hw(flags); \
+	if (ANOMALY_05000311 || ANOMALY_05000323) \
+		local_irq_save_hw(flags); \
+	ret = 0x01 & (gpio_array[gpio_bank(gpio)]->name >> gpio_sub_n(gpio)); \
+	if (ANOMALY_05000311 || ANOMALY_05000323) { \
+		AWA_DUMMY_READ(name); \
+		local_irq_restore_hw(flags); \
+	} \
 	return ret; \
 } \
 EXPORT_SYMBOL(get_gpio_ ## name);
-#else
-#define GET_GPIO(name) \
-unsigned short get_gpio_ ## name(unsigned gpio) \
-{ \
-	return (0x01 & (gpio_bankb[gpio_bank(gpio)]->name >> gpio_sub_n(gpio))); \
-} \
-EXPORT_SYMBOL(get_gpio_ ## name);
-#endif
 
 GET_GPIO(data)
 GET_GPIO(dir)
@@ -552,27 +451,21 @@ GET_GPIO(maskb)
 
 /*Get current PORT date (16-bit word)*/
 
-#if ANOMALY_05000311 || ANOMALY_05000323
 #define GET_GPIO_P(name) \
 unsigned short get_gpiop_ ## name(unsigned gpio) \
 { \
 	unsigned long flags; \
 	unsigned short ret; \
-	local_irq_save_hw(flags); \
-	ret = (gpio_bankb[gpio_bank(gpio)]->name); \
-	AWA_DUMMY_READ(name); \
-	local_irq_restore_hw(flags); \
+	if (ANOMALY_05000311 || ANOMALY_05000323) \
+		local_irq_save_hw(flags); \
+	ret = (gpio_array[gpio_bank(gpio)]->name); \
+	if (ANOMALY_05000311 || ANOMALY_05000323) { \
+		AWA_DUMMY_READ(name); \
+		local_irq_restore_hw(flags); \
+	} \
 	return ret; \
 } \
 EXPORT_SYMBOL(get_gpiop_ ## name);
-#else
-#define GET_GPIO_P(name) \
-unsigned short get_gpiop_ ## name(unsigned gpio) \
-{ \
-	return (gpio_bankb[gpio_bank(gpio)]->name);\
-} \
-EXPORT_SYMBOL(get_gpiop_ ## name);
-#endif
 
 GET_GPIO_P(data)
 GET_GPIO_P(dir)
@@ -585,6 +478,26 @@ GET_GPIO_P(maskb)
 
 
 #ifdef CONFIG_PM
+
+static unsigned short wakeup_map[GPIO_BANK_NUM];
+static unsigned char wakeup_flags_map[MAX_BLACKFIN_GPIOS];
+
+static const unsigned int sic_iwr_irqs[] = {
+#if defined(BF533_FAMILY)
+	IRQ_PROG_INTB
+#elif defined(BF537_FAMILY)
+	IRQ_PROG_INTB, IRQ_PORTG_INTB, IRQ_MAC_TX
+#elif defined(BF538_FAMILY)
+	IRQ_PORTF_INTB
+#elif defined(BF527_FAMILY) || defined(BF518_FAMILY)
+	IRQ_PORTF_INTB, IRQ_PORTG_INTB, IRQ_PORTH_INTB
+#elif defined(BF561_FAMILY)
+	IRQ_PROG0_INTB, IRQ_PROG1_INTB, IRQ_PROG2_INTB
+#else
+# error no SIC_IWR defined
+#endif
+};
+
 /***********************************************************
 *
 * FUNCTIONS: Blackfin PM Setup API
@@ -669,18 +582,18 @@ u32 bfin_pm_standby_setup(void)
 		mask = wakeup_map[gpio_bank(i)];
 		bank = gpio_bank(i);
 
-		gpio_bank_saved[bank].maskb = gpio_bankb[bank]->maskb;
-		gpio_bankb[bank]->maskb = 0;
+		gpio_bank_saved[bank].maskb = gpio_array[bank]->maskb;
+		gpio_array[bank]->maskb = 0;
 
 		if (mask) {
 #if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY)
 			gpio_bank_saved[bank].fer   = *port_fer[bank];
 #endif
-			gpio_bank_saved[bank].inen  = gpio_bankb[bank]->inen;
-			gpio_bank_saved[bank].polar = gpio_bankb[bank]->polar;
-			gpio_bank_saved[bank].dir   = gpio_bankb[bank]->dir;
-			gpio_bank_saved[bank].edge  = gpio_bankb[bank]->edge;
-			gpio_bank_saved[bank].both  = gpio_bankb[bank]->both;
+			gpio_bank_saved[bank].inen  = gpio_array[bank]->inen;
+			gpio_bank_saved[bank].polar = gpio_array[bank]->polar;
+			gpio_bank_saved[bank].dir   = gpio_array[bank]->dir;
+			gpio_bank_saved[bank].edge  = gpio_array[bank]->edge;
+			gpio_bank_saved[bank].both  = gpio_array[bank]->both;
 			gpio_bank_saved[bank].reserved =
 						reserved_gpio_map[bank];
 
@@ -700,7 +613,7 @@ u32 bfin_pm_standby_setup(void)
 			}
 
 			bfin_internal_set_wake(sic_iwr_irqs[bank], 1);
-			gpio_bankb[bank]->maskb_set = wakeup_map[gpio_bank(i)];
+			gpio_array[bank]->maskb_set = wakeup_map[gpio_bank(i)];
 		}
 	}
 
@@ -721,18 +634,18 @@ void bfin_pm_standby_restore(void)
 #if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY)
 			*port_fer[bank]   	= gpio_bank_saved[bank].fer;
 #endif
-			gpio_bankb[bank]->inen  = gpio_bank_saved[bank].inen;
-			gpio_bankb[bank]->dir   = gpio_bank_saved[bank].dir;
-			gpio_bankb[bank]->polar = gpio_bank_saved[bank].polar;
-			gpio_bankb[bank]->edge  = gpio_bank_saved[bank].edge;
-			gpio_bankb[bank]->both  = gpio_bank_saved[bank].both;
+			gpio_array[bank]->inen  = gpio_bank_saved[bank].inen;
+			gpio_array[bank]->dir   = gpio_bank_saved[bank].dir;
+			gpio_array[bank]->polar = gpio_bank_saved[bank].polar;
+			gpio_array[bank]->edge  = gpio_bank_saved[bank].edge;
+			gpio_array[bank]->both  = gpio_bank_saved[bank].both;
 
 			reserved_gpio_map[bank] =
 					gpio_bank_saved[bank].reserved;
 			bfin_internal_set_wake(sic_iwr_irqs[bank], 0);
 		}
 
-		gpio_bankb[bank]->maskb = gpio_bank_saved[bank].maskb;
+		gpio_array[bank]->maskb = gpio_bank_saved[bank].maskb;
 	}
 	AWA_DUMMY_READ(maskb);
 }
@@ -745,21 +658,21 @@ void bfin_gpio_pm_hibernate_suspend(void)
 		bank = gpio_bank(i);
 
 #if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY)
-			gpio_bank_saved[bank].fer   = *port_fer[bank];
+		gpio_bank_saved[bank].fer = *port_fer[bank];
 #if defined(BF527_FAMILY) || defined(BF518_FAMILY)
-			gpio_bank_saved[bank].mux   = *port_mux[bank];
+		gpio_bank_saved[bank].mux = *port_mux[bank];
 #else
-			if (bank == 0)
-				gpio_bank_saved[bank].mux   = bfin_read_PORT_MUX();
+		if (bank == 0)
+			gpio_bank_saved[bank].mux = bfin_read_PORT_MUX();
 #endif
 #endif
-			gpio_bank_saved[bank].data  = gpio_bankb[bank]->data;
-			gpio_bank_saved[bank].inen  = gpio_bankb[bank]->inen;
-			gpio_bank_saved[bank].polar = gpio_bankb[bank]->polar;
-			gpio_bank_saved[bank].dir   = gpio_bankb[bank]->dir;
-			gpio_bank_saved[bank].edge  = gpio_bankb[bank]->edge;
-			gpio_bank_saved[bank].both  = gpio_bankb[bank]->both;
-			gpio_bank_saved[bank].maska  = gpio_bankb[bank]->maska;
+		gpio_bank_saved[bank].data  = gpio_array[bank]->data;
+		gpio_bank_saved[bank].inen  = gpio_array[bank]->inen;
+		gpio_bank_saved[bank].polar = gpio_array[bank]->polar;
+		gpio_bank_saved[bank].dir   = gpio_array[bank]->dir;
+		gpio_bank_saved[bank].edge  = gpio_array[bank]->edge;
+		gpio_bank_saved[bank].both  = gpio_array[bank]->both;
+		gpio_bank_saved[bank].maska = gpio_array[bank]->maska;
 	}
 
 	AWA_DUMMY_READ(maska);
@@ -770,27 +683,27 @@ void bfin_gpio_pm_hibernate_restore(void)
 	int i, bank;
 
 	for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) {
-			bank = gpio_bank(i);
+		bank = gpio_bank(i);
 
 #if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY)
 #if defined(BF527_FAMILY) || defined(BF518_FAMILY)
-			*port_mux[bank] = gpio_bank_saved[bank].mux;
+		*port_mux[bank] = gpio_bank_saved[bank].mux;
 #else
-			if (bank == 0)
-				bfin_write_PORT_MUX(gpio_bank_saved[bank].mux);
+		if (bank == 0)
+			bfin_write_PORT_MUX(gpio_bank_saved[bank].mux);
 #endif
-			*port_fer[bank]   	= gpio_bank_saved[bank].fer;
+		*port_fer[bank] = gpio_bank_saved[bank].fer;
 #endif
-			gpio_bankb[bank]->inen  = gpio_bank_saved[bank].inen;
-			gpio_bankb[bank]->dir   = gpio_bank_saved[bank].dir;
-			gpio_bankb[bank]->polar = gpio_bank_saved[bank].polar;
-			gpio_bankb[bank]->edge  = gpio_bank_saved[bank].edge;
-			gpio_bankb[bank]->both  = gpio_bank_saved[bank].both;
+		gpio_array[bank]->inen  = gpio_bank_saved[bank].inen;
+		gpio_array[bank]->dir   = gpio_bank_saved[bank].dir;
+		gpio_array[bank]->polar = gpio_bank_saved[bank].polar;
+		gpio_array[bank]->edge  = gpio_bank_saved[bank].edge;
+		gpio_array[bank]->both  = gpio_bank_saved[bank].both;
 
-			gpio_bankb[bank]->data_set = gpio_bank_saved[bank].data
-							| gpio_bank_saved[bank].dir;
+		gpio_array[bank]->data_set = gpio_bank_saved[bank].data
+						| gpio_bank_saved[bank].dir;
 
-			gpio_bankb[bank]->maska = gpio_bank_saved[bank].maska;
+		gpio_array[bank]->maska = gpio_bank_saved[bank].maska;
 	}
 	AWA_DUMMY_READ(maska);
 }
@@ -817,12 +730,12 @@ void bfin_gpio_pm_hibernate_suspend(void)
 	for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) {
 		bank = gpio_bank(i);
 
-			gpio_bank_saved[bank].fer  = gpio_array[bank]->port_fer;
-			gpio_bank_saved[bank].mux  = gpio_array[bank]->port_mux;
-			gpio_bank_saved[bank].data  = gpio_array[bank]->port_data;
-			gpio_bank_saved[bank].data  = gpio_array[bank]->port_data;
-			gpio_bank_saved[bank].inen  = gpio_array[bank]->port_inen;
-			gpio_bank_saved[bank].dir   = gpio_array[bank]->port_dir_set;
+		gpio_bank_saved[bank].fer = gpio_array[bank]->port_fer;
+		gpio_bank_saved[bank].mux = gpio_array[bank]->port_mux;
+		gpio_bank_saved[bank].data = gpio_array[bank]->data;
+		gpio_bank_saved[bank].data = gpio_array[bank]->data;
+		gpio_bank_saved[bank].inen = gpio_array[bank]->inen;
+		gpio_bank_saved[bank].dir = gpio_array[bank]->dir_set;
 	}
 }
 
@@ -831,21 +744,21 @@ void bfin_gpio_pm_hibernate_restore(void)
 	int i, bank;
 
 	for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) {
-			bank = gpio_bank(i);
-
-			gpio_array[bank]->port_mux  = gpio_bank_saved[bank].mux;
-			gpio_array[bank]->port_fer  = gpio_bank_saved[bank].fer;
-			gpio_array[bank]->port_inen  = gpio_bank_saved[bank].inen;
-			gpio_array[bank]->port_dir_set   = gpio_bank_saved[bank].dir;
-			gpio_array[bank]->port_set = gpio_bank_saved[bank].data
-							| gpio_bank_saved[bank].dir;
+		bank = gpio_bank(i);
+
+		gpio_array[bank]->port_mux = gpio_bank_saved[bank].mux;
+		gpio_array[bank]->port_fer = gpio_bank_saved[bank].fer;
+		gpio_array[bank]->inen = gpio_bank_saved[bank].inen;
+		gpio_array[bank]->dir_set = gpio_bank_saved[bank].dir;
+		gpio_array[bank]->data_set = gpio_bank_saved[bank].data
+						| gpio_bank_saved[bank].dir;
 	}
 }
 #endif
 
 unsigned short get_gpio_dir(unsigned gpio)
 {
-	return (0x01 & (gpio_array[gpio_bank(gpio)]->port_dir_clear >> gpio_sub_n(gpio)));
+	return (0x01 & (gpio_array[gpio_bank(gpio)]->dir_clear >> gpio_sub_n(gpio)));
 }
 EXPORT_SYMBOL(get_gpio_dir);
 
@@ -905,9 +818,7 @@ int peripheral_request(unsigned short per, const char *label)
 		 */
 
 #ifdef BF548_FAMILY
-		u16 funct = get_portmux(ident);
-
-		if (!((per & P_MAYSHARE) && (funct == P_FUNCT2MUX(per)))) {
+		if (!((per & P_MAYSHARE) && get_portmux(per) == P_FUNCT2MUX(per))) {
 #else
 		if (!(per & P_MAYSHARE)) {
 #endif
@@ -931,11 +842,7 @@ int peripheral_request(unsigned short per, const char *label)
  anyway:
 	reserved_peri_map[gpio_bank(ident)] |= gpio_bit(ident);
 
-#ifdef BF548_FAMILY
-	portmux_setup(ident, P_FUNCT2MUX(per));
-#else
-	portmux_setup(per, P_FUNCT2MUX(per));
-#endif
+	portmux_setup(per);
 	port_setup(ident, PERIPHERAL_USAGE);
 
 	local_irq_restore_hw(flags);
@@ -977,9 +884,6 @@ void peripheral_free(unsigned short per)
 	if (!(per & P_DEFINED))
 		return;
 
-	if (check_gpio(ident) < 0)
-		return;
-
 	local_irq_save_hw(flags);
 
 	if (unlikely(!(reserved_peri_map[gpio_bank(ident)] & gpio_bit(ident)))) {
@@ -1056,9 +960,15 @@ int bfin_gpio_request(unsigned gpio, const char *label)
 		local_irq_restore_hw(flags);
 		return -EBUSY;
 	}
-	if (unlikely(reserved_gpio_irq_map[gpio_bank(gpio)] & gpio_bit(gpio)))
+	if (unlikely(reserved_gpio_irq_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
 		printk(KERN_NOTICE "bfin-gpio: GPIO %d is already reserved as gpio-irq!"
 		       " (Documentation/blackfin/bfin-gpio-notes.txt)\n", gpio);
+	}
+#ifndef BF548_FAMILY
+	else {	/* Reset POLAR setting when acquiring a gpio for the first time */
+		set_gpio_polar(gpio, 0);
+	}
+#endif
 
 	reserved_gpio_map[gpio_bank(gpio)] |= gpio_bit(gpio);
 	set_label(gpio, label);
@@ -1078,6 +988,8 @@ void bfin_gpio_free(unsigned gpio)
 	if (check_gpio(gpio) < 0)
 		return;
 
+	might_sleep();
+
 	local_irq_save_hw(flags);
 
 	if (unlikely(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)))) {
@@ -1158,8 +1070,16 @@ void bfin_gpio_irq_free(unsigned gpio)
 	local_irq_restore_hw(flags);
 }
 
-
+static inline void __bfin_gpio_direction_input(unsigned gpio)
+{
 #ifdef BF548_FAMILY
+	gpio_array[gpio_bank(gpio)]->dir_clear = gpio_bit(gpio);
+#else
+	gpio_array[gpio_bank(gpio)]->dir &= ~gpio_bit(gpio);
+#endif
+	gpio_array[gpio_bank(gpio)]->inen |= gpio_bit(gpio);
+}
+
 int bfin_gpio_direction_input(unsigned gpio)
 {
 	unsigned long flags;
@@ -1170,125 +1090,85 @@ int bfin_gpio_direction_input(unsigned gpio)
 	}
 
 	local_irq_save_hw(flags);
-	gpio_array[gpio_bank(gpio)]->port_dir_clear = gpio_bit(gpio);
-	gpio_array[gpio_bank(gpio)]->port_inen |= gpio_bit(gpio);
+	__bfin_gpio_direction_input(gpio);
+	AWA_DUMMY_READ(inen);
 	local_irq_restore_hw(flags);
 
 	return 0;
 }
 EXPORT_SYMBOL(bfin_gpio_direction_input);
 
-int bfin_gpio_direction_output(unsigned gpio, int value)
+void bfin_gpio_irq_prepare(unsigned gpio)
 {
+#ifdef BF548_FAMILY
 	unsigned long flags;
+#endif
 
-	if (!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
-		gpio_error(gpio);
-		return -EINVAL;
-	}
+	port_setup(gpio, GPIO_USAGE);
 
+#ifdef BF548_FAMILY
 	local_irq_save_hw(flags);
-	gpio_array[gpio_bank(gpio)]->port_inen &= ~gpio_bit(gpio);
-	gpio_set_value(gpio, value);
-	gpio_array[gpio_bank(gpio)]->port_dir_set = gpio_bit(gpio);
+	__bfin_gpio_direction_input(gpio);
 	local_irq_restore_hw(flags);
-
-	return 0;
+#endif
 }
-EXPORT_SYMBOL(bfin_gpio_direction_output);
 
 void bfin_gpio_set_value(unsigned gpio, int arg)
 {
 	if (arg)
-		gpio_array[gpio_bank(gpio)]->port_set = gpio_bit(gpio);
+		gpio_array[gpio_bank(gpio)]->data_set = gpio_bit(gpio);
 	else
-		gpio_array[gpio_bank(gpio)]->port_clear = gpio_bit(gpio);
+		gpio_array[gpio_bank(gpio)]->data_clear = gpio_bit(gpio);
 }
 EXPORT_SYMBOL(bfin_gpio_set_value);
 
-int bfin_gpio_get_value(unsigned gpio)
-{
-	return (1 & (gpio_array[gpio_bank(gpio)]->port_data >> gpio_sub_n(gpio)));
-}
-EXPORT_SYMBOL(bfin_gpio_get_value);
-
-void bfin_gpio_irq_prepare(unsigned gpio)
+int bfin_gpio_direction_output(unsigned gpio, int value)
 {
 	unsigned long flags;
 
-	port_setup(gpio, GPIO_USAGE);
+	if (!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
+		gpio_error(gpio);
+		return -EINVAL;
+	}
 
 	local_irq_save_hw(flags);
-	gpio_array[gpio_bank(gpio)]->port_dir_clear = gpio_bit(gpio);
-	gpio_array[gpio_bank(gpio)]->port_inen |= gpio_bit(gpio);
-	local_irq_restore_hw(flags);
-}
 
+	gpio_array[gpio_bank(gpio)]->inen &= ~gpio_bit(gpio);
+	gpio_set_value(gpio, value);
+#ifdef BF548_FAMILY
+	gpio_array[gpio_bank(gpio)]->dir_set = gpio_bit(gpio);
 #else
+	gpio_array[gpio_bank(gpio)]->dir |= gpio_bit(gpio);
+#endif
+
+	AWA_DUMMY_READ(dir);
+	local_irq_restore_hw(flags);
+
+	return 0;
+}
+EXPORT_SYMBOL(bfin_gpio_direction_output);
 
 int bfin_gpio_get_value(unsigned gpio)
 {
+#ifdef BF548_FAMILY
+	return (1 & (gpio_array[gpio_bank(gpio)]->data >> gpio_sub_n(gpio)));
+#else
 	unsigned long flags;
-	int ret;
 
 	if (unlikely(get_gpio_edge(gpio))) {
+		int ret;
 		local_irq_save_hw(flags);
 		set_gpio_edge(gpio, 0);
 		ret = get_gpio_data(gpio);
 		set_gpio_edge(gpio, 1);
 		local_irq_restore_hw(flags);
-
 		return ret;
 	} else
 		return get_gpio_data(gpio);
+#endif
 }
 EXPORT_SYMBOL(bfin_gpio_get_value);
 
-
-int bfin_gpio_direction_input(unsigned gpio)
-{
-	unsigned long flags;
-
-	if (!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
-		gpio_error(gpio);
-		return -EINVAL;
-	}
-
-	local_irq_save_hw(flags);
-	gpio_bankb[gpio_bank(gpio)]->dir &= ~gpio_bit(gpio);
-	gpio_bankb[gpio_bank(gpio)]->inen |= gpio_bit(gpio);
-	AWA_DUMMY_READ(inen);
-	local_irq_restore_hw(flags);
-
-	return 0;
-}
-EXPORT_SYMBOL(bfin_gpio_direction_input);
-
-int bfin_gpio_direction_output(unsigned gpio, int value)
-{
-	unsigned long flags;
-
-	if (!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
-		gpio_error(gpio);
-		return -EINVAL;
-	}
-
-	local_irq_save_hw(flags);
-	gpio_bankb[gpio_bank(gpio)]->inen &= ~gpio_bit(gpio);
-
-	if (value)
-		gpio_bankb[gpio_bank(gpio)]->data_set = gpio_bit(gpio);
-	else
-		gpio_bankb[gpio_bank(gpio)]->data_clear = gpio_bit(gpio);
-
-	gpio_bankb[gpio_bank(gpio)]->dir |= gpio_bit(gpio);
-	AWA_DUMMY_READ(dir);
-	local_irq_restore_hw(flags);
-
-	return 0;
-}
-EXPORT_SYMBOL(bfin_gpio_direction_output);
-
 /* If we are booting from SPI and our board lacks a strong enough pull up,
  * the core can reset and execute the bootrom faster than the resistor can
  * pull the signal logically high.  To work around this (common) error in
@@ -1299,23 +1179,15 @@ EXPORT_SYMBOL(bfin_gpio_direction_output);
  * lives here as we need to force all the GPIO states w/out going through
  * BUG() checks and such.
  */
-void bfin_gpio_reset_spi0_ssel1(void)
+void bfin_reset_boot_spi_cs(unsigned short pin)
 {
-	u16 gpio = P_IDENT(P_SPI0_SSEL1);
-
+	unsigned short gpio = P_IDENT(pin);
 	port_setup(gpio, GPIO_USAGE);
-	gpio_bankb[gpio_bank(gpio)]->data_set = gpio_bit(gpio);
+	gpio_array[gpio_bank(gpio)]->data_set = gpio_bit(gpio);
 	AWA_DUMMY_READ(data_set);
 	udelay(1);
 }
 
-void bfin_gpio_irq_prepare(unsigned gpio)
-{
-	port_setup(gpio, GPIO_USAGE);
-}
-
-#endif /*BF548_FAMILY */
-
 #if defined(CONFIG_PROC_FS)
 static int gpio_proc_read(char *buf, char **start, off_t offset,
 			  int len, int *unused_i, void *unused_v)
@@ -1369,11 +1241,7 @@ int bfin_gpiolib_get_value(struct gpio_chip *chip, unsigned gpio)
 
 void bfin_gpiolib_set_value(struct gpio_chip *chip, unsigned gpio, int value)
 {
-#ifdef BF548_FAMILY
 	return bfin_gpio_set_value(gpio, value);
-#else
-	return set_gpio_data(gpio, value);
-#endif
 }
 
 int bfin_gpiolib_gpio_request(struct gpio_chip *chip, unsigned gpio)

arch/blackfin/kernel/cplb-mpu/cplbinit.c

@@ -63,10 +63,8 @@ void __init generate_cplb_tables_cpu(unsigned int cpu)
 	dcplb_tbl[cpu][i_d].addr = 0;
 	dcplb_tbl[cpu][i_d++].data = SDRAM_OOPS | PAGE_SIZE_1KB;
 
-#if 0
 	icplb_tbl[cpu][i_i].addr = 0;
-	icplb_tbl[cpu][i_i++].data = i_cache | CPLB_USER_RD | PAGE_SIZE_4KB;
-#endif
+	icplb_tbl[cpu][i_i++].data = i_cache | CPLB_USER_RD | PAGE_SIZE_1KB;
 
 	/* Cover kernel memory with 4M pages.  */
 	addr = 0;

arch/blackfin/kernel/cplb-nompu/cplbmgr.c

@@ -163,12 +163,14 @@ MGR_ATTR static int icplb_miss(int cpu)
 		nr_icplb_supv_miss[cpu]++;
 
 	base = 0;
-	for (idx = 0; idx < icplb_nr_bounds; idx++) {
+	idx = 0;
+	do {
 		eaddr = icplb_bounds[idx].eaddr;
 		if (addr < eaddr)
 			break;
 		base = eaddr;
-	}
+	} while (++idx < icplb_nr_bounds);
+
 	if (unlikely(idx == icplb_nr_bounds))
 		return CPLB_NO_ADDR_MATCH;
 
@@ -208,12 +210,14 @@ MGR_ATTR static int dcplb_miss(int cpu)
 		nr_dcplb_supv_miss[cpu]++;
 
 	base = 0;
-	for (idx = 0; idx < dcplb_nr_bounds; idx++) {
+	idx = 0;
+	do {
 		eaddr = dcplb_bounds[idx].eaddr;
 		if (addr < eaddr)
 			break;
 		base = eaddr;
-	}
+	} while (++idx < dcplb_nr_bounds);
+
 	if (unlikely(idx == dcplb_nr_bounds))
 		return CPLB_NO_ADDR_MATCH;
 

arch/blackfin/kernel/irqchip.c

@@ -35,6 +35,7 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <asm/trace.h>
+#include <asm/pda.h>
 
 static atomic_t irq_err_count;
 static spinlock_t irq_controller_lock;
@@ -91,8 +92,13 @@ int show_interrupts(struct seq_file *p, void *v)
 		seq_putc(p, '\n');
  skip:
 		spin_unlock_irqrestore(&irq_desc[i].lock, flags);
-	} else if (i == NR_IRQS)
+	} else if (i == NR_IRQS) {
+		seq_printf(p, "NMI: ");
+		for_each_online_cpu(j)
+			seq_printf(p, "%10u ", cpu_pda[j].__nmi_count);
+		seq_printf(p, "     CORE  Non Maskable Interrupt\n");
 		seq_printf(p, "Err: %10u\n",  atomic_read(&irq_err_count));
+	}
 	return 0;
 }