staging: iio: ad7280: Replace mlock with driver private lock

The IIO subsystem is redefining iio_dev->mlock to be used by
the IIO core only for protecting device operating mode changes.
ie. Changes between INDIO_DIRECT_MODE, INDIO_BUFFER_* modes.

In this driver, mlock was being used to protect hardware state
changes.  Replace it with a lock in the devices global data.

Signed-off-by: Gargi Sharma <gs051095@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

drivers/staging/iio/adc/ad7280a.c

@@ -134,6 +134,7 @@ struct ad7280_state {
 	unsigned char			aux_threshhigh;
 	unsigned char			aux_threshlow;
 	unsigned char			cb_mask[AD7280A_MAX_CHAIN];
+	struct mutex			lock; /* protect sensor state */
 
 	__be32				buf[2] ____cacheline_aligned;
 };
@@ -410,7 +411,7 @@ static ssize_t ad7280_store_balance_sw(struct device *dev,
 	devaddr = this_attr->address >> 8;
 	ch = this_attr->address & 0xFF;
 
-	mutex_lock(&indio_dev->mlock);
+	mutex_lock(&st->lock);
 	if (readin)
 		st->cb_mask[devaddr] |= 1 << (ch + 2);
 	else
@@ -418,7 +419,7 @@ static ssize_t ad7280_store_balance_sw(struct device *dev,
 
 	ret = ad7280_write(st, devaddr, AD7280A_CELL_BALANCE,
 			   0, st->cb_mask[devaddr]);
-	mutex_unlock(&indio_dev->mlock);
+	mutex_unlock(&st->lock);
 
 	return ret ? ret : len;
 }
@@ -433,10 +434,10 @@ static ssize_t ad7280_show_balance_timer(struct device *dev,
 	int ret;
 	unsigned int msecs;
 
-	mutex_lock(&indio_dev->mlock);
+	mutex_lock(&st->lock);
 	ret = ad7280_read(st, this_attr->address >> 8,
 			  this_attr->address & 0xFF);
-	mutex_unlock(&indio_dev->mlock);
+	mutex_unlock(&st->lock);
 
 	if (ret < 0)
 		return ret;
@@ -466,11 +467,11 @@ static ssize_t ad7280_store_balance_timer(struct device *dev,
 	if (val > 31)
 		return -EINVAL;
 
-	mutex_lock(&indio_dev->mlock);
+	mutex_lock(&st->lock);
 	ret = ad7280_write(st, this_attr->address >> 8,
 			   this_attr->address & 0xFF,
 			   0, (val & 0x1F) << 3);
-	mutex_unlock(&indio_dev->mlock);
+	mutex_unlock(&st->lock);
 
 	return ret ? ret : len;
 }
@@ -655,7 +656,7 @@ static ssize_t ad7280_write_channel_config(struct device *dev,
 
 	val = clamp(val, 0L, 0xFFL);
 
-	mutex_lock(&indio_dev->mlock);
+	mutex_lock(&st->lock);
 	switch ((u32)this_attr->address) {
 	case AD7280A_CELL_OVERVOLTAGE:
 		st->cell_threshhigh = val;
@@ -674,7 +675,7 @@ static ssize_t ad7280_write_channel_config(struct device *dev,
 	ret = ad7280_write(st, AD7280A_DEVADDR_MASTER,
 			   this_attr->address, 1, val);
 
-	mutex_unlock(&indio_dev->mlock);
+	mutex_unlock(&st->lock);
 
 	return ret ? ret : len;
 }
@@ -792,13 +793,13 @@ static int ad7280_read_raw(struct iio_dev *indio_dev,
 
 	switch (m) {
 	case IIO_CHAN_INFO_RAW:
-		mutex_lock(&indio_dev->mlock);
+		mutex_lock(&st->lock);
 		if (chan->address == AD7280A_ALL_CELLS)
 			ret = ad7280_read_all_channels(st, st->scan_cnt, NULL);
 		else
 			ret = ad7280_read_channel(st, chan->address >> 8,
 						  chan->address & 0xFF);
-		mutex_unlock(&indio_dev->mlock);
+		mutex_unlock(&st->lock);
 
 		if (ret < 0)
 			return ret;
@@ -847,6 +848,7 @@ static int ad7280_probe(struct spi_device *spi)
 	st = iio_priv(indio_dev);
 	spi_set_drvdata(spi, indio_dev);
 	st->spi = spi;
+	mutex_init(&st->lock);
 
 	if (!pdata)
 		pdata = &ad7793_default_pdata;