memory: Convert to using %pOF instead of full_name

Now that we have a custom printf format specifier, convert users of
full_name to use %pOF instead. This is preparation to remove storing
of the full path string for each node.

Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Roger Quadros <rogerq@ti.com>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-omap@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

drivers/memory/atmel-ebi.c

@@ -156,8 +156,8 @@ static int atmel_ebi_xslate_smc_timings(struct atmel_ebi_dev *ebid,
 out:
 	if (ret) {
 		dev_err(ebid->ebi->dev,
-			"missing or invalid timings definition in %s",
-			np->full_name);
+			"missing or invalid timings definition in %pOF",
+			np);
 		return ret;
 	}
 
@@ -267,8 +267,8 @@ static int atmel_ebi_xslate_smc_config(struct atmel_ebi_dev *ebid,
 		return -EINVAL;
 
 	if ((ret > 0 && !required) || (!ret && required)) {
-		dev_err(ebid->ebi->dev, "missing atmel,smc- properties in %s",
-			np->full_name);
+		dev_err(ebid->ebi->dev, "missing atmel,smc- properties in %pOF",
+			np);
 		return -EINVAL;
 	}
 
@@ -311,8 +311,7 @@ static int atmel_ebi_dev_setup(struct atmel_ebi *ebi, struct device_node *np,
 
 		if (cs >= AT91_MATRIX_EBI_NUM_CS ||
 		    !(ebi->caps->available_cs & BIT(cs))) {
-			dev_err(dev, "invalid reg property in %s\n",
-				np->full_name);
+			dev_err(dev, "invalid reg property in %pOF\n", np);
 			return -EINVAL;
 		}
 
@@ -321,7 +320,7 @@ static int atmel_ebi_dev_setup(struct atmel_ebi *ebi, struct device_node *np,
 	}
 
 	if (!numcs) {
-		dev_err(dev, "invalid reg property in %s\n", np->full_name);
+		dev_err(dev, "invalid reg property in %pOF\n", np);
 		return -EINVAL;
 	}
 
@@ -569,8 +568,8 @@ static int atmel_ebi_probe(struct platform_device *pdev)
 
 		ret = atmel_ebi_dev_setup(ebi, child, reg_cells);
 		if (ret) {
-			dev_err(dev, "failed to configure EBI bus for %s, disabling the device",
-				child->full_name);
+			dev_err(dev, "failed to configure EBI bus for %pOF, disabling the device",
+				child);
 
 			ret = atmel_ebi_dev_disable(ebi, child);
 			if (ret)

drivers/memory/jz4780-nemc.c

@@ -322,8 +322,8 @@ static int jz4780_nemc_probe(struct platform_device *pdev)
 			bank = of_read_number(prop, 1);
 			if (bank < 1 || bank >= JZ4780_NEMC_NUM_BANKS) {
 				dev_err(nemc->dev,
-					"%s requests invalid bank %u\n",
-					child->full_name, bank);
+					"%pOF requests invalid bank %u\n",
+					child, bank);
 
 				/* Will continue the outer loop below. */
 				referenced = 0;
@@ -334,12 +334,12 @@ static int jz4780_nemc_probe(struct platform_device *pdev)
 		}
 
 		if (!referenced) {
-			dev_err(nemc->dev, "%s has no addresses\n",
-				child->full_name);
+			dev_err(nemc->dev, "%pOF has no addresses\n",
+				child);
 			continue;
 		} else if (nemc->banks_present & referenced) {
-			dev_err(nemc->dev, "%s conflicts with another node\n",
-				child->full_name);
+			dev_err(nemc->dev, "%pOF conflicts with another node\n",
+				child);
 			continue;
 		}
 

drivers/memory/mvebu-devbus.c

@@ -105,8 +105,8 @@ static int get_timing_param_ps(struct devbus *devbus,
 
 	err = of_property_read_u32(node, name, &time_ps);
 	if (err < 0) {
-		dev_err(devbus->dev, "%s has no '%s' property\n",
-			name, node->full_name);
+		dev_err(devbus->dev, "%pOF has no '%s' property\n",
+			node, name);
 		return err;
 	}
 
@@ -127,8 +127,8 @@ static int devbus_get_timing_params(struct devbus *devbus,
 	err = of_property_read_u32(node, "devbus,bus-width", &r->bus_width);
 	if (err < 0) {
 		dev_err(devbus->dev,
-			"%s has no 'devbus,bus-width' property\n",
-			node->full_name);
+			"%pOF has no 'devbus,bus-width' property\n",
+			node);
 		return err;
 	}
 
@@ -180,8 +180,8 @@ static int devbus_get_timing_params(struct devbus *devbus,
 					   &w->sync_enable);
 		if (err < 0) {
 			dev_err(devbus->dev,
-				"%s has no 'devbus,sync-enable' property\n",
-				node->full_name);
+				"%pOF has no 'devbus,sync-enable' property\n",
+				node);
 			return err;
 		}
 	}

drivers/memory/omap-gpmc.c

@@ -1930,8 +1930,8 @@ static int gpmc_probe_onenand_child(struct platform_device *pdev,
 	struct omap_onenand_platform_data *gpmc_onenand_data;
 
 	if (of_property_read_u32(child, "reg", &val) < 0) {
-		dev_err(&pdev->dev, "%s has no 'reg' property\n",
-			child->full_name);
+		dev_err(&pdev->dev, "%pOF has no 'reg' property\n",
+			child);
 		return -ENODEV;
 	}
 
@@ -1979,14 +1979,14 @@ static int gpmc_probe_generic_child(struct platform_device *pdev,
 	struct gpmc_device *gpmc = platform_get_drvdata(pdev);
 
 	if (of_property_read_u32(child, "reg", &cs) < 0) {
-		dev_err(&pdev->dev, "%s has no 'reg' property\n",
-			child->full_name);
+		dev_err(&pdev->dev, "%pOF has no 'reg' property\n",
+			child);
 		return -ENODEV;
 	}
 
 	if (of_address_to_resource(child, 0, &res) < 0) {
-		dev_err(&pdev->dev, "%s has malformed 'reg' property\n",
-			child->full_name);
+		dev_err(&pdev->dev, "%pOF has malformed 'reg' property\n",
+			child);
 		return -ENODEV;
 	}
 
@@ -2084,8 +2084,8 @@ static int gpmc_probe_generic_child(struct platform_device *pdev,
 		ret = of_property_read_u32(child, "bank-width",
 					   &gpmc_s.device_width);
 		if (ret < 0) {
-			dev_err(&pdev->dev, "%s has no 'bank-width' property\n",
-				child->full_name);
+			dev_err(&pdev->dev, "%pOF has no 'bank-width' property\n",
+				child);
 			goto err;
 		}
 	}