Merge tag 'davinci-for-v4.6/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/fixes-non-critical

Warning fixes for DaVinci collected while testing
randconfig builds.

* tag 'davinci-for-v4.6/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
  ARM: davinci: make I2C support optional
  ARM: davinci: DA8xx+DMx combined kernels need PATCH_PHYS_VIRT
  ARM: davinci: avoid unused mityomapl138_pn_info variable
  ARM: davinci: limit DT support to DA850

arch/arm/Kconfig

@@ -623,6 +623,7 @@ config ARCH_DAVINCI
 	select ARCH_HAS_HOLES_MEMORYMODEL
 	select ARCH_REQUIRE_GPIOLIB
 	select CLKDEV_LOOKUP
+	select CPU_ARM926T
 	select GENERIC_ALLOCATOR
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_IRQ_CHIP

arch/arm/mach-davinci/Kconfig

@@ -9,7 +9,6 @@ config CP_INTC
 
 config ARCH_DAVINCI_DMx
 	bool
-	select CPU_ARM926T
 
 menu "TI DaVinci Implementations"
 
@@ -32,7 +31,7 @@ config ARCH_DAVINCI_DM646x
 
 config ARCH_DAVINCI_DA830
 	bool "DA830/OMAP-L137/AM17x based system"
-	depends on !ARCH_DAVINCI_DMx || AUTO_ZRELADDR
+	depends on !ARCH_DAVINCI_DMx || (AUTO_ZRELADDR && ARM_PATCH_PHYS_VIRT)
 	select ARCH_DAVINCI_DA8XX
 	# needed on silicon revs 1.0, 1.1:
 	select CPU_DCACHE_WRITETHROUGH if !CPU_DCACHE_DISABLE
@@ -40,13 +39,12 @@ config ARCH_DAVINCI_DA830
 
 config ARCH_DAVINCI_DA850
 	bool "DA850/OMAP-L138/AM18x based system"
-	depends on !ARCH_DAVINCI_DMx || AUTO_ZRELADDR
+	depends on !ARCH_DAVINCI_DMx || (AUTO_ZRELADDR && ARM_PATCH_PHYS_VIRT)
 	select ARCH_DAVINCI_DA8XX
 	select CP_INTC
 
 config ARCH_DAVINCI_DA8XX
 	bool
-	select CPU_ARM926T
 
 config ARCH_DAVINCI_DM365
 	bool "DaVinci 365 based system"
@@ -58,7 +56,7 @@ comment "DaVinci Board Type"
 config MACH_DA8XX_DT
 	bool "Support DA8XX platforms using device tree"
 	default y
-	depends on ARCH_DAVINCI_DA8XX
+	depends on ARCH_DAVINCI_DA850
 	select PINCTRL
 	help
 	  Say y here to include support for TI DaVinci DA850 based using
@@ -68,8 +66,6 @@ config MACH_DAVINCI_EVM
 	bool "TI DM644x EVM"
 	default ARCH_DAVINCI_DM644x
 	depends on ARCH_DAVINCI_DM644x
-	select EEPROM_AT24
-	select I2C
 	help
 	  Configure this option to specify the whether the board used
 	  for development is a DM644x EVM
@@ -77,8 +73,6 @@ config MACH_DAVINCI_EVM
 config MACH_SFFSDR
 	bool "Lyrtech SFFSDR"
 	depends on ARCH_DAVINCI_DM644x
-	select EEPROM_AT24
-	select I2C
 	help
 	  Say Y here to select the Lyrtech Small Form Factor
 	  Software Defined Radio (SFFSDR) board.
@@ -109,8 +103,6 @@ config MACH_DAVINCI_DM6467_EVM
 	bool "TI DM6467 EVM"
 	default ARCH_DAVINCI_DM646x
 	depends on ARCH_DAVINCI_DM646x
-	select EEPROM_AT24
-	select I2C
 	select MACH_DAVINCI_DM6467TEVM
 	help
 	  Configure this option to specify the whether the board used
@@ -123,8 +115,6 @@ config MACH_DAVINCI_DM365_EVM
 	bool "TI DM365 EVM"
 	default ARCH_DAVINCI_DM365
 	depends on ARCH_DAVINCI_DM365
-	select EEPROM_AT24
-	select I2C
 	help
 	  Configure this option to specify whether the board used
 	  for development is a DM365 EVM
@@ -133,9 +123,7 @@ config MACH_DAVINCI_DA830_EVM
 	bool "TI DA830/OMAP-L137/AM17x Reference Platform"
 	default ARCH_DAVINCI_DA830
 	depends on ARCH_DAVINCI_DA830
-	select EEPROM_AT24
-	select GPIO_PCF857X
-	select I2C
+	select GPIO_PCF857X if I2C
 	help
 	  Say Y here to select the TI DA830/OMAP-L137/AM17x Evaluation Module.
 
@@ -204,8 +192,6 @@ endchoice
 config MACH_MITYOMAPL138
 	bool "Critical Link MityDSP-L138/MityARM-1808 SoM"
 	depends on ARCH_DAVINCI_DA850
-	select EEPROM_AT24
-	select I2C
 	help
 	  Say Y here to select the Critical Link MityDSP-L138/MityARM-1808
 	  System on Module.  Information on this SoM may be found at

arch/arm/mach-davinci/board-dm644x-evm.c

@@ -267,7 +267,7 @@ static struct platform_device rtc_dev = {
 static struct snd_platform_data dm644x_evm_snd_data;
 
 /*----------------------------------------------------------------------*/
-
+#ifdef CONFIG_I2C
 /*
  * I2C GPIO expanders
  */
@@ -612,6 +612,7 @@ static void __init evm_init_i2c(void)
 	i2c_add_driver(&dm6446evm_msp_driver);
 	i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
 }
+#endif
 
 #define VENC_STD_ALL	(V4L2_STD_NTSC | V4L2_STD_PAL)
 
@@ -780,7 +781,9 @@ static __init void davinci_evm_init(void)
 				pr_warn("%s: Cannot configure AEMIF\n",
 					__func__);
 
+#ifdef CONFIG_I2C
 			evm_leds[7].default_trigger = "nand-disk";
+#endif
 			if (HAS_NOR)
 				pr_warn("WARNING: both NAND and NOR flash are enabled; disable one of them.\n");
 		} else if (HAS_NOR)
@@ -789,9 +792,10 @@ static __init void davinci_evm_init(void)
 
 	platform_add_devices(davinci_evm_devices,
 			     ARRAY_SIZE(davinci_evm_devices));
+#ifdef CONFIG_I2C
 	evm_init_i2c();
-
 	davinci_setup_mmc(0, &dm6446evm_mmc_config);
+#endif
 	dm644x_init_video(&dm644xevm_capture_cfg, &dm644xevm_display_cfg);
 
 	davinci_serial_init(dm644x_serial_device);

arch/arm/mach-davinci/board-dm646x-evm.c

@@ -121,6 +121,7 @@ static struct platform_device davinci_nand_device = {
 
 #define HAS_ATA		IS_ENABLED(CONFIG_BLK_DEV_PALMCHIP_BK3710)
 
+#ifdef CONFIG_I2C
 /* CPLD Register 0 bits to control ATA */
 #define DM646X_EVM_ATA_RST		BIT(0)
 #define DM646X_EVM_ATA_PWD		BIT(1)
@@ -316,6 +317,7 @@ static struct at24_platform_data eeprom_info = {
 	.setup          = davinci_get_mac_addr,
 	.context	= (void *)0x7f00,
 };
+#endif
 
 static u8 dm646x_iis_serializer_direction[] = {
        TX_MODE, RX_MODE, INACTIVE_MODE, INACTIVE_MODE,
@@ -346,6 +348,7 @@ static struct snd_platform_data dm646x_evm_snd_data[] = {
 	},
 };
 
+#ifdef CONFIG_I2C
 static struct i2c_client *cpld_client;
 
 static int cpld_video_probe(struct i2c_client *client,
@@ -710,6 +713,7 @@ static void __init evm_init_i2c(void)
 	evm_init_cpld();
 	evm_init_video();
 }
+#endif
 
 #define DM6467T_EVM_REF_FREQ		33000000
 
@@ -764,7 +768,10 @@ static __init void evm_init(void)
 	if (ret)
 		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
 
+#ifdef CONFIG_I2C
 	evm_init_i2c();
+#endif
+
 	davinci_serial_init(dm646x_serial_device);
 	dm646x_init_mcasp0(&dm646x_evm_snd_data[0]);
 	dm646x_init_mcasp1(&dm646x_evm_snd_data[1]);

arch/arm/mach-davinci/board-mityomapl138.c

@@ -51,6 +51,7 @@ struct factory_config {
 
 static struct factory_config factory_config;
 
+#ifdef CONFIG_CPU_FREQ
 struct part_no_info {
 	const char	*part_no;	/* part number string of interest */
 	int		max_freq;	/* khz */
@@ -87,7 +88,6 @@ static struct part_no_info mityomapl138_pn_info[] = {
 	},
 };
 
-#ifdef CONFIG_CPU_FREQ
 static void mityomapl138_cpufreq_init(const char *partnum)
 {
 	int i, ret;