leds: core: avoid error message when a USB LED device is unplugged

When a USB LED device is unplugged the remove call chain calls
led_classdev_unregister which tries to switch the LED off.
As the device has been removed already this results in a ENODEV
error message in dmesg.
Avoid this error message by ignoring ENODEV in calls from
led_classdev_unregister if the LED device is flagged as pluggable.

Therefore a new flag LED_HW_PLUGGABLE was introduced which should be set by
all LED drivers handling pluggable LED devices (mainly USB LED devices).

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>

drivers/leds/led-class.c

@@ -245,6 +245,8 @@ void led_classdev_unregister(struct led_classdev *led_cdev)
 	up_write(&led_cdev->trigger_lock);
 #endif
 
+	led_cdev->flags |= LED_UNREGISTERING;
+
 	/* Stop blinking */
 	led_stop_software_blink(led_cdev);
 

drivers/leds/led-core.c

@@ -98,7 +98,10 @@ static void set_brightness_delayed(struct work_struct *ws)
 						led_cdev->delayed_set_value);
 	else
 		ret = -ENOTSUPP;
-	if (ret < 0)
+	if (ret < 0 &&
+	    /* LED HW might have been unplugged, therefore don't warn */
+	    !(ret == -ENODEV && (led_cdev->flags & LED_UNREGISTERING) &&
+	    (led_cdev->flags & LED_HW_PLUGGABLE)))
 		dev_err(led_cdev->dev,
 			"Setting an LED's brightness failed (%d)\n", ret);
 }

include/linux/leds.h

@@ -39,6 +39,7 @@ struct led_classdev {
 
 	/* Lower 16 bits reflect status */
 #define LED_SUSPENDED		(1 << 0)
+#define LED_UNREGISTERING	(1 << 1)
 	/* Upper 16 bits reflect control information */
 #define LED_CORE_SUSPENDRESUME	(1 << 16)
 #define LED_BLINK_ONESHOT	(1 << 17)
@@ -48,6 +49,7 @@ struct led_classdev {
 #define LED_BLINK_DISABLE	(1 << 21)
 #define LED_SYSFS_DISABLE	(1 << 22)
 #define LED_DEV_CAP_FLASH	(1 << 23)
+#define LED_HW_PLUGGABLE	(1 << 24)
 
 	/* Set LED brightness level
 	 * Must not sleep. Use brightness_set_blocking for drivers